diff options
Diffstat (limited to 'Completion')
194 files changed, 4062 insertions, 1243 deletions
diff --git a/Completion/BSD/Command/_chflags b/Completion/BSD/Command/_chflags index 924b09acd..905aa0645 100644 --- a/Completion/BSD/Command/_chflags +++ b/Completion/BSD/Command/_chflags @@ -1,22 +1,31 @@ #compdef chflags -local args own='-g *(-u$EUID)' +local own='-g *(-u$EUID)' +local -a args recurse (( ! EUID || $+_comp_priv_prefix )) && own= -if [[ $OSTYPE = (darwin|dragonfly|freebsd)* ]]; then - args=( - "-f[don't display diagnostic messages]" - '-v[verbose output]' - ) -fi +case $OSTYPE in + (darwin|dragonfly|freebsd)*) + args=( + "-f[don't display diagnostic messages]" + '-v[verbose output]' + ) + ;| + darwin*|freebsd*) + recurse=( "-x[don't cross mount points]" ) + ;| + netbsd*) + args=( '-d[if the change requested would not alter the flags, attempt no change]' ) + ;| +esac _arguments -s -A "-*" : $args \ ': :_file_flags' \ '*:file:_files "$own"' \ - opth \ '-h[act on symlinks]' \ - - optR \ + - optR $recurse \ '-R[recurse directories]' \ '(-L -P)-H[follow symlinks on the command line (specify with -R)]' \ '(-H -P)-L[follow all symlinks (specify with -R)]' \ diff --git a/Completion/BSD/Command/_freebsd-update b/Completion/BSD/Command/_freebsd-update index 7dd907298..af37641e4 100644 --- a/Completion/BSD/Command/_freebsd-update +++ b/Completion/BSD/Command/_freebsd-update @@ -17,6 +17,7 @@ _arguments \ '-d[store working files in workdir]:workdir:_files -/' \ '-f[read configuration options from conffile]:conf file:_files' \ '-F[force freebsd-update fetch to proceed where it normally would not]' \ + '-j[operate on specified jail]: :_jails' \ '-k[trust an RSA key with SHA256 of KEY]:RSA key' \ '-r[specify the new release]:new release' \ '-s[fetch files from the specified server or server pool]:server:_hosts' \ diff --git a/Completion/BSD/Command/_fw_update b/Completion/BSD/Command/_fw_update index b01749f3f..84b5f808d 100644 --- a/Completion/BSD/Command/_fw_update +++ b/Completion/BSD/Command/_fw_update @@ -3,8 +3,10 @@ _arguments -s -S -A "-*" \ '(*)-a[install or update firmware for all drivers]' \ '-d[delete drivers instead of adding them]' \ - '-i[display information]' \ + '-F[download firmware only]' \ '-n[dry run]' \ - '-p[use the firmware at specified path]:path:' \ + '-p+[use the firmware at specified path]: : _alternative + "urls\:url\:_urls" + "directories\:path\:_directories"' \ '*-v[verbose output]' \ '(-a)*:driver:' diff --git a/Completion/BSD/Command/_ipfw b/Completion/BSD/Command/_ipfw index 49d0ef1e8..b910aa34d 100644 --- a/Completion/BSD/Command/_ipfw +++ b/Completion/BSD/Command/_ipfw @@ -1,7 +1,7 @@ -#compdef ipfw +#compdef ipfw dnctl local word=$'/[^ \t\0]#[ \t\0]/' comma next pqs nat -local -a actions address pathname ropts ca +local -a actions address dummynet args ropts ca local -A opt_args nat_options _ipfw_tables() { @@ -80,6 +80,46 @@ address=( \| \) ) +dummynet=( + $'/(pipe|queue|sched)[ \t\0]/' -'pqs=${match%?}' ':dummynet-commands:dummynet configuration:$ca pipe queue sched' + $word ': _message -e numbers number' + $word ':options:config:$ca config' + \( $'/bw[ \t\0]/' + \( $word ':bandwidths: :_numbers -M "m:{a-z}={A-Z}" bandwidth {K,M,G}{bit,Byte}/s' + \| $word ':devices:device:_net_interfaces -qS " "' \) + \| $'/delay[ \t\0]/' $word ': _message -e numbers "propagation delay (ms)"' + \| $'/burst[ \t\0]/' $word ': _message -e numbers "size (bytes)"' + \| $'/profile[ \t\0]/' $word ':files:file:_files -qS " "' + \| $'/pipe[ \t\0]/' $word ': _message -e pipes pipe' + \| $'/weight[ \t\0]/' $word ': _message -e weights "weight (1-100) [1]"' + \| $'/type[ \t\0]/-' + \( $'/fq_(pie|codel)[ \t\0]/' + \( $'/limit[ \t\0]/' $word ': _message -e numbers "limit (packets) [10240]"' + \| $'/flows[ \t\0]/' $word ': _message -e numbers "flow queues [1024]"' + \| $'/quantum[ \t\0]/' ':parameters:parameter:$ca -F line quantum limit flows' \) \# + '/[]/' + \| $word ':types:scheduling algorithm:$ca fifo wf2q+ rr qfq fq_codel fq_pie fq_codel' \) + \| $'/buckets[ \t\0]/' $word ': _message -e sizes "hash table size (16-65536)"' + \| $'/mask[ \t\0]/' $word ':mask-specifiers:mask specifier:$ca dst-ip dst-ip6 src-ip src-ip6 dst-port src-port flow-id proto all' + \| $'/plr[ \t\0]/' $word ': _message -e numbers "packet loss rate (0.0-1.0)"' + \| $'/queue[ \t\0]/' $word ': _message -e sizes "queue size"' + \| $'/(red|gred)[ \t\0]/' $word ': _message -e thresholds thresholds' + \| $'/codel[ \t\0]/' + \( $'/(target|interval)[ \t\0]/' $word ': _message -e times "time (ms)"' + \| $'/(ecn|noecn)[ \t\0]/' ':options:option:$ca -F line target interval ecn noecn' \) \# + '/[]/' + \| $'/pie[ \t\0]/' + \( $'/(target|tupdate|max_burst)[ \t\0]/' $word ': _message -e times "time"' + \| $'/(alpha|beta)[ \t\0]/' $word ': _message -e weights weight' + \| $'/max_ecnth[ \t\0]/' $word ': _message -e probabilities probability' + \| $word ':options:option:$ca -F line alpha beta max_burst max_ecnth {,no}{ecn,capdrop,drand} onoff dre ts' \) \# + '/[]/' + \| // '-[[ $pqs = pipe ]]' $'/noerror[ \t\0]/' ':options:option:$ca -F line bw delay burst profile buckets mask noerror plr queue red gred codel pie' + \| // '-[[ $pqs = queue ]]' $'/noerror[ \t\0]/' ':options:option:$ca -F line pipe weight buckets mask noerror plr queue red gred codel pie' + \| // '-[[ $pqs = sched ]]' $'/[]/' ':options:option:$ca -F line type bw delay burst profile' + \) \# +) + actions=( $'/[^\0]##\0(-[a-zA-Z0-9]##[ \t]#)#/' # skip over options, completed by _arguments but can \( # be quoted in one argument which that doesn't handle @@ -241,48 +281,14 @@ actions=( \| $'/redirect_proto[ \t\0]/' $word ':protocols:protocol:$ca sctp tcp udp' $word ': _message -e ip-addresses "IP address"' $word ': _message -e ip-addresses "IP address"' - \| $word ':parameters:config parameter:$ca ip if log deny_in same_ports unreg_only unreg_cgn reset reverse proxy_only skip_global redirect_port redirect_addr redirect_proto' + \| $'/port_range[ \t\0]/' + '/[0-9]#-/' ': _message -e ports lower' + $word ': _message -e ports upper' + \| $word ':parameters:config parameter:$ca ip if log deny_in same_ports unreg_only unreg_cgn reset reverse proxy_only skip_global redirect_port redirect_addr redirect_proto port_range' \) \# \| $'/show[ \t\0]/' $word ':actions:action:(config log)' \| '/[]/' ':commands:command:$ca config show' \) - \| # dummynet configuration - $'/(pipe|queue|sched)[ \t\0]/' -'pqs=${match%?}' ':dummynet-commands:dummynet configuration:$ca pipe queue sched' - $word ': _message -e numbers number' - $word ':options:config:$ca config' - \( $'/bw[ \t\0]/' - \( $word ':bandwidths: :_numbers -M "m:{a-z}={A-Z}" bandwidth {K,M,G}{bit,Byte}/s' - \| $word ':devices:device:_net_interfaces -qS " "' \) - \| $'/delay[ \t\0]/' $word ': _message -e numbers "propagation delay (ms)"' - \| $'/burst[ \t\0]/' $word ': _message -e numbers "size (bytes)"' - \| $'/profile[ \t\0]/' $word ':files:file:_files -qS " "' - \| $'/pipe[ \t\0]/' $word ': _message -e pipes pipe' - \| $'/weight[ \t\0]/' $word ': _message -e weights "weight (1-100) [1]"' - \| $'/type[ \t\0]/-' - \( $'/fq_(pie|codel)[ \t\0]/' - \( $'/limit[ \t\0]/' $word ': _message -e numbers "limit (packets) [10240]"' - \| $'/flows[ \t\0]/' $word ': _message -e numbers "flow queues [1024]"' - \| $'/quantum[ \t\0]/' ':parameters:parameter:$ca -F line quantum limit flows' \) \# - '/[]/' - \| $word ':types:scheduling algorithm:$ca fifo wf2q+ rr qfq fq_codel fq_pie fq_codel' \) - \| $'/buckets[ \t\0]/' $word ': _message -e sizes "hash table size (16-65536)"' - \| $'/mask[ \t\0]/' $word ':mask-specifiers:mask specifier:$ca dst-ip dst-ip6 src-ip src-ip6 dst-port src-port flow-id proto all' - \| $'/plr[ \t\0]/' $word ': _message -e numbers "packet loss rate (0.0-1.0)"' - \| $'/queue[ \t\0]/' $word ': _message -e sizes "queue size"' - \| $'/(red|gred)[ \t\0]/' $word ': _message -e thresholds thresholds' - \| $'/codel[ \t\0]/' - \( $'/(target|interval)[ \t\0]/' $word ': _message -e times "time (ms)"' - \| $'/(ecn|noecn)[ \t\0]/' ':options:option:$ca -F line target interval ecn noecn' \) \# - '/[]/' - \| $'/pie[ \t\0]/' - \( $'/(target|tupdate|max_burst)[ \t\0]/' $word ': _message -e times "time"' - \| $'/(alpha|beta)[ \t\0]/' $word ': _message -e weights weight' - \| $'/max_ecnth[ \t\0]/' $word ': _message -e probabilities probability' - \| $word ':options:option:$ca -F line alpha beta max_burst max_ecnth {,no}{ecn,capdrop,drand} onoff dre ts' \) \# - '/[]/' - \| // '-[[ $pqs = pipe ]]' $'/noerror[ \t\0]/' ':options:option:$ca -F line bw delay burst profile buckets mask noerror plr queue red gred codel pie' - \| // '-[[ $pqs = queue ]]' $'/noerror[ \t\0]/' ':options:option:$ca -F line pipe weight buckets mask noerror plr queue red gred codel pie' - \| // '-[[ $pqs = sched ]]' $'/[]/' ':options:option:$ca -F line type bw delay burst profile' - \) \# + \| $dummynet \| # sysctl shortcuts $'/(en|dis)able[ \t\0]/' ':sysctl-shortcuts:sysctl shortcut:$ca enable disable' $word ':values:value:(firewall altq one_pass debug verbose dyn_keepalive)' @@ -292,11 +298,36 @@ actions=( \) ) -if (( $words[(I)-p*] )); then - pathname=( ':path:_files -P / -W /' ) -fi +case $service in + ipfw) + _regex_arguments _ipfw_actions "$actions[@]" + args=( + '!-e' # nop for compatibility + '(-p)-a[show counter values when listing rules (implied by show)]' + '(-p)-b[show only the action and the comment]' + '-c[show rules in compact form]' + '(-p)-d[show dynamic rules in addition to static ones]' + '(-p)-D[act on dynamic states only]' + '-f[run without confirmation]' + '(-p)-i[format values as IP addresses in table listings]' + '-N[resolve addresses and service names in output]' + '-q[quiet output]' + '-S[show the set each rule belongs to]' + '(-p -T)-t[show timestamp of last match, ctime() format]' + '(-p -t)-T[show timestamp of last match as seconds since epoch]' + '(-a -b -d -D -i -s -t -T *)-p+[specify preprocessor]:preprocessor:_command_names -e' + ) + if (( $words[(I)-p*] )); then + args+=( ':path:_files -P / -W /' ) + fi + ;; + dnctl) + _regex_arguments _ipfw_actions \ + $'/[^\0]##\0(-[a-zA-Z0-9]##[ \t]#)#/' \ + "$dummynet[@]" + ;; +esac -_regex_arguments _ipfw_actions "$actions[@]" if [[ -prefix *[$' \t']* ]]; then # This allows from things like ipfw "-n add..." @@ -304,22 +335,10 @@ if [[ -prefix *[$' \t']* ]]; then return fi -_arguments -s $pathname \ - '(-p)-a[show counter values when listing rules (implied by show)]' \ - '(-p)-b[show only the action and the comment]' \ - '-c[show rules in compact form]' \ - '(-p)-d[show dynamic rules in addition to static ones]' \ - '(-p)-D[act on dynamic states only]' \ - '-f[run without confirmation]' \ +_arguments -s $args \ '(- *)-h[display syntax summary]' \ - '(-p)-i[format values as IP addresses in table listings]' \ '-n[only check syntax, make no changes]' \ - '-N[resolve addresses and service names in output]' \ - '-q[quiet output]' \ - '-S[show the set each rule belongs to]' \ '(-p)-s+[sort pipes by field]:field (negative reverses):((0\:unsorted 1\:packets 2\:bytes 3\:total\ packets 4\:total\ bytes))' \ - '(-p -T)-t[show timestamp of last match, ctime() format]' \ - '(-p -t)-T[show timestamp of last match as seconds since epoch]' \ - '(-a -b -d -D -i -s -t -T *)-p+[specify preprocessor]:preprocessor:_command_names -e' \ + '-v[verbose]' \ '*:::actions:= _ipfw_actions' diff --git a/Completion/BSD/Command/_jexec b/Completion/BSD/Command/_jexec index 6a2d05a81..cd99ebe91 100644 --- a/Completion/BSD/Command/_jexec +++ b/Completion/BSD/Command/_jexec @@ -6,7 +6,7 @@ _jexec_normal() { # relative paths are relative to the jail's root path=( "$(_call_program paths jls -j $words[1] path)"/$^path ) shift 1 words; (( CURRENT-- )) - _normal + _normal -p $service } _jexec() { diff --git a/Completion/BSD/Command/_ldap b/Completion/BSD/Command/_ldap index 8fa17e2f8..181e6b0d0 100644 --- a/Completion/BSD/Command/_ldap +++ b/Completion/BSD/Command/_ldap @@ -80,8 +80,8 @@ else '-x[use simple authentication]' \ '-Z[use StartTLS]' \ '-z+[specify maximum number of results or 0 for no limit]:size limit [0]:' \ - '::filter:' \ - '*:attribute:' + '1: :_ldap_filters' \ + '*: :_ldap_attributes' ;; esac fi diff --git a/Completion/BSD/Command/_pfctl b/Completion/BSD/Command/_pfctl index 812e52bdb..8063eb504 100644 --- a/Completion/BSD/Command/_pfctl +++ b/Completion/BSD/Command/_pfctl @@ -91,7 +91,10 @@ case $OSTYPE in ) ;| freebsd*) - args+=( '-P[display ports numerically]' ) + args+=( + '-M[kill matching states in the opposite direction]' + '-P[display ports numerically]' + ) ;; esac diff --git a/Completion/BSD/Command/_rcctl b/Completion/BSD/Command/_rcctl index 6cfebf420..457c3eb85 100644 --- a/Completion/BSD/Command/_rcctl +++ b/Completion/BSD/Command/_rcctl @@ -3,7 +3,7 @@ local context state line local -a actions lsarg subcmds variables -actions=(check reload restart start stop) +actions=(configtest check reload restart start stop) subcmds=(disable enable get getdef ls order set) variables=(class flags status timeout user) lsarg=( @@ -46,6 +46,6 @@ case $service in '*:argument:' ;; ${(~j:|:)actions}|disable|enable) - _arguments "*:service to $words[2]:_services" + _arguments "*:service to ${words[2]}:_services" ;; esac diff --git a/Completion/BSD/Command/_sockstat b/Completion/BSD/Command/_sockstat index 1d7973db7..f372fe1b3 100644 --- a/Completion/BSD/Command/_sockstat +++ b/Completion/BSD/Command/_sockstat @@ -21,6 +21,14 @@ case $OSTYPE in '-w[use wider field size for displaying addresses]' ) ;| + freebsd<13->.*) + args+=( + '-C[display the congestion control module]' + '-i[display the inp_gencnt]' + "-n[don't resolve numeric UIDs to user names]" + '-q[quiet mode, do not print the header line]' + ) + ;| freebsd*) for proto in ${${(M)${(f)"$(</etc/protocols)"}##[a-z0-9]*}}; do case $proto in diff --git a/Completion/Base/Completer/_approximate b/Completion/Base/Completer/_approximate index dcd8b2776..96860b5a7 100644 --- a/Completion/Base/Completer/_approximate +++ b/Completion/Base/Completer/_approximate @@ -12,7 +12,6 @@ local _comp_correct _correct_expl _correct_group comax cfgacc match local oldcontext="${curcontext}" opm="$compstate[pattern_match]" -local dounfunction integer ret=1 if [[ "$1" = -a* ]]; then @@ -44,34 +43,31 @@ fi _tags corrections original -# Otherwise temporarily define a function to use instead of -# the builtin that adds matches. This is used to be able -# to stick the `(#a...)' in the right place (after an -# ignored prefix). +# Otherwise temporarily define a function to use instead of the builtin that +# adds matches. This is used to be able to stick the `(#a...)' in the right +# place (after an ignored prefix). # -# Current shell structure for use with "always", to make sure -# we unfunction the compadd. +# Current shell structure for use with "always", to make sure we unfunction our +# compadd and restore any compadd function defined previously. { -if (( ! $+functions[compadd] )); then - dounfunction=1 - compadd() { - local ppre="$argv[(I)-p]" - - [[ ${argv[(I)-[a-zA-Z]#U[a-zA-Z]#]} -eq 0 && - "${#:-$PREFIX$SUFFIX}" -le _comp_correct ]] && return - - if [[ "$PREFIX" = \~* && ( ppre -eq 0 || "$argv[ppre+1]" != \~* ) ]]; then - PREFIX="~(#a${_comp_correct})${PREFIX[2,-1]}" - else - PREFIX="(#a${_comp_correct})$PREFIX" - fi +_shadow -s _approximate compadd +compadd() { + local ppre="$argv[(I)-p]" - (( $_correct_group && ${${argv[1,(r)-(|-)]}[(I)-*[JV]]} )) && - _correct_expl[_correct_group]=${argv[1,(r)-(-|)][(R)-*[JV]]} + [[ ${argv[(I)-[a-zA-Z]#U[a-zA-Z]#]} -eq 0 && + "${#:-$PREFIX$SUFFIX}" -le _comp_correct ]] && return - builtin compadd "$_correct_expl[@]" "$@" - } -fi + if [[ "$PREFIX" = \~* && ( ppre -eq 0 || "$argv[ppre+1]" != \~* ) ]]; then + PREFIX="~(#a${_comp_correct})${PREFIX[2,-1]}" + else + PREFIX="(#a${_comp_correct})$PREFIX" + fi + + (( $_correct_group && ${${argv[1,(r)-(|-)]}[(I)-*[JV]]} )) && + _correct_expl[_correct_group]=${argv[1,(r)-(-|)][(R)-*[JV]]} + + compadd@_approximate "$_correct_expl[@]" "$@" +} _comp_correct=1 @@ -115,7 +111,7 @@ while [[ _comp_correct -le comax ]]; do done } always { - [[ -n $dounfunction ]] && (( $+functions[compadd] )) && unfunction compadd + _unshadow } (( ret == 0 )) && return 0 diff --git a/Completion/Base/Completer/_prefix b/Completion/Base/Completer/_prefix index 74be5f47d..aea2f7863 100644 --- a/Completion/Base/Completer/_prefix +++ b/Completion/Base/Completer/_prefix @@ -49,13 +49,8 @@ for tmp in "$comp[@]"; do fi if [[ "$tmp" != _prefix ]] && "$tmp"; then - [[ compstate[nmatches] -gt 1 ]] && return 0 - compadd -U -i "$IPREFIX" -I "$ISUFFIX" - "${compstate[unambiguous]%$suf}x" - compstate[list]= - if [[ -n $compstate[unambiguous] ]]; then - compstate[insert]=unambiguous - else - compstate[insert]=0 + if [[ -n $compstate[old_list] || ${compstate[unambiguous]%$suf} == $PREFIX ]]; then + compstate[to_end]=match fi return 0 fi diff --git a/Completion/Base/Core/_main_complete b/Completion/Base/Core/_main_complete index 169ca1f40..408a66ee3 100644 --- a/Completion/Base/Core/_main_complete +++ b/Completion/Base/Core/_main_complete @@ -93,19 +93,15 @@ fi if [[ -z "$compstate[quote]" ]]; then if [[ -o equals ]] && compset -P 1 '='; then compstate[context]=equal - elif [[ "$PREFIX" != */* && "$PREFIX[1]" = '~' ]]; then - if [[ "$PREFIX" = '~['[^\]]# ]]; then - # Inside ~[...] should be treated as a subscript. - compset -p 2 - # To be consistent, we ignore all but the contents of the square - # brackets. - compset -S '\]*' - compstate[context]=subscript - [[ -n $_comps[-subscript-] ]] && $_comps[-subscript-] && return - else - compset -p 1 - compstate[context]=tilde - fi + elif [[ "$PREFIX" = \~\[[^]]# ]]; then + # Inside ~[...] should be treated as a subscript. + compset -p 2 + # To be consistent, we ignore all but the contents of the square brackets. + compset -S '\]*' + compstate[context]=subscript + elif [[ "$PREFIX" = \~[^/]# ]]; then + compset -p 1 + compstate[context]=tilde fi fi diff --git a/Completion/Base/Utility/_numbers b/Completion/Base/Utility/_numbers index 97bb8b4c8..069fc75a4 100644 --- a/Completion/Base/Utility/_numbers +++ b/Completion/Base/Utility/_numbers @@ -73,7 +73,7 @@ elif [[ -prefix $~pat || $PREFIX = $~partial ]]; then zformat -f suffix "$suffixfmt" "x:${${argv[i+1]#:}%%:*}" \ "X:${${argv[i+1]#:}#*:}" "d:${#${argv[i+1]}[1]#:}" \ i:i r:$(( $# - i - 1)) - suffixes+="$suffix" + suffixes+="${suffix//\%/%%}" done [[ -n $suffixes ]] && formats+=( x:$suffixes ) diff --git a/Completion/Base/Utility/_shadow b/Completion/Base/Utility/_shadow index 5b0f79c36..9e78af38f 100644 --- a/Completion/Base/Utility/_shadow +++ b/Completion/Base/Utility/_shadow @@ -8,7 +8,7 @@ # } # # Invoke callers of fname # } always { -# _unshadow fname +# _unshadow # } ## Alternate usage: # { @@ -19,7 +19,7 @@ # } # # Invoke callers of fname # } always { -# _unshadow -s suffix fname +# _unshadow # } ## @@ -33,36 +33,62 @@ zmodload zsh/parameter # Or what? # This probably never comes up, but protect ourself from recursive call # chains that may duplicate the top elements of $funcstack by creating # a counter of _shadow calls and using it to make shadow names unique. -typeset -gHi _shadowdepth=0 +builtin typeset -gHi .shadow.depth=0 +builtin typeset -gHa .shadow.stack # Create a copy of each fname so that a caller may redefine _shadow() { - local -A fsfx=( -s ${funcstack[2]}:${functrace[2]}:$((_shadowdepth+1)) ) - local fname + emulate -L zsh + local -A fsfx=( -s ${funcstack[2]}:${functrace[2]}:$((.shadow.depth+1)) ) + local fname shadowname + local -a fnames zparseopts -K -A fsfx -D s: for fname; do - local shadowname=${fname}@${fsfx[-s]} - (( ${+functions[$fname]} )) && - builtin functions -c $fname $shadowname + shadowname=${fname}@${fsfx[-s]} + if (( ${+functions[$shadowname]} )) + then + # Called again with the same -s, just ignore it + continue + elif (( ${+functions[$fname]} )) + then + builtin functions -c -- $fname $shadowname + fnames+=(f@$fname) + elif (( ${+builtins[$fname]} )) + then + eval "function -- ${(q-)shadowname} { builtin ${(q-)fname} \"\$@\" }" + fnames+=(b@$fname) + else + eval "function -- ${(q-)shadowname} { command ${(q-)fname} \"\$@\" }" + fnames+=(c@$fname) + fi done - ((_shadowdepth++)) + [[ -z $REPLY ]] && REPLY=${fsfx[-s]} + builtin set -A .shadow.stack ${fsfx[-s]} $fnames -- ${.shadow.stack} + ((.shadow.depth++)) } # Remove the redefined function and shadowing name _unshadow() { - local -A fsfx=( -s ${funcstack[2]}:${functrace[2]}:${_shadowdepth} ) - local fname - zparseopts -K -A fsfx -D s: - for fname; do - local shadowname=${fname}@${fsfx[-s]} - if (( ${+functions[$shadowname]} )); then - builtin functions -c $shadowname $fname - builtin unfunction $shadowname - elif (( ${+functions[$fname]} )); then - builtin unfunction $fname + emulate -L zsh + local fname shadowname fsfx=${.shadow.stack[1]} + local -a fnames + [[ -n $fsfx ]] || return 1 + shift .shadow.stack + while [[ ${.shadow.stack[1]?no shadows} != -- ]]; do + fname=${.shadow.stack[1]#?@} + shadowname=${fname}@${fsfx} + if (( ${+functions[$fname]} )); then + builtin unfunction -- $fname fi + case ${.shadow.stack[1]} in + (f@*) builtin functions -c -- $shadowname $fname ;& + ([bc]@*) builtin unfunction -- $shadowname ;; + esac + shift .shadow.stack done - ((_shadowdepth--)) + [[ -z $REPLY ]] && REPLY=$fsfx + shift .shadow.stack + ((.shadow.depth--)) } # This is tricky. When we call _shadow recursively from autoload, diff --git a/Completion/Base/Widget/_complete_debug b/Completion/Base/Widget/_complete_debug index 94fd4accd..d8b1bd837 100644 --- a/Completion/Base/Widget/_complete_debug +++ b/Completion/Base/Widget/_complete_debug @@ -19,7 +19,7 @@ integer debug_fd=-1 setopt localoptions no_ignorebraces debug_indent=( '%'{3..20}'(e. .)' ) } - local PROMPT4 PS4="${(j::)debug_indent}+%N:%i> " + local PROMPT4="$PROMPT4" PS4="${(j::)debug_indent}+%N:%i> " setopt xtrace : $ZSH_NAME $ZSH_VERSION ${1:-_main_complete} diff --git a/Completion/Darwin/Command/_open b/Completion/Darwin/Command/_open index 2563e5eb5..1c693dfb8 100644 --- a/Completion/Darwin/Command/_open +++ b/Completion/Darwin/Command/_open @@ -25,14 +25,20 @@ _open() { '(: * -)--args[pass remaining arguments to application]:*:::argument' \ '(-a -b -e -f -R -t)-b+[specify application bundle identifier]: :->bundle-ids' \ '(-a -b -e -f -R -t)-e[open with TextEdit]' \ + '*--env[add the environment variable of the launched application]:env_var=value:_parameters -g "*export*" -qS=' \ '(-h)-f[open standard input with TextEdit or specified application]' \ '(-R)-F[open application with fresh state]' \ - '-g[do not bring application to foreground]' \ + '(-j)-g[do not bring application to foreground]' \ '(-f)-h[open library header file]' \ + '(-g)-j[launch the app hidden]' \ '(-R)-n[always open new instance of application]' \ '(-a -b -e -f -F -n -s -t -W --args)-R[reveal in Finder]' \ '(-R)-s+[specify SDK name/version]: :->sdks' \ + '--stdin[launch the application with stdin connected to the given file]:file:_files' \ + '--stdout[launch the application with stdout connected to the given file]:file:_files' \ + '--stderr[launch the application with stderr connected to the given file]:file:_files' \ '(-a -b -e -f -R -t)-t[open with default text editor]' \ + '-u[open URL with whatever application claims the url scheme]:url:_urls' \ '(-R)-W[wait for application to exit]' \ '(-f)*: :->files' \ && ret=0 diff --git a/Completion/Darwin/Command/_otool b/Completion/Darwin/Command/_otool index c3fc70b91..b6a30a730 100644 --- a/Completion/Darwin/Command/_otool +++ b/Completion/Darwin/Command/_otool @@ -13,6 +13,7 @@ _arguments \ '-D[display just the internal name of shared lib]' \ '-s[display the contents of the specified section]:segment name: :section name: ' \ '-t[display the contents of (__TEXT,__text) section]' \ + '-x[display the content of every __text section found in the file]' \ '-d[display the contents of (__DATA,__data) section]' \ '-o[display the contents of __OBJC segment]' \ '-r[display the relocation entries]' \ @@ -25,6 +26,9 @@ _arguments \ '-G[display the data in code table]' \ '-C[display the linker optimization hints]' \ '-P[print the info_plist section as strings]' \ + '-dyld_info[print bind and rebase information used by dyld]' \ + '-dyld_opcodes[print raw dyld bind and rebase opcodes present in a final linked binary]' \ + '-chained_fixups[print raw chained fixup data present in a final linked binary]' \ '-p[with -t and -v/V: start disassembly from the specified symbol]:symbol name: ' \ '-v[display verbosely (symbolically) when possible]' \ '-V[display disassembled operands symbolically]' \ @@ -34,7 +38,8 @@ _arguments \ '-function_offsets[with disassembly, print decimal offset from the last label]' \ '-j[with disassembly, print opcode bytes]' \ "-Q[use otool's disassembler]" \ - '-arch[select the specified architecture from a universal file]:arch:(i386 x86_64)' \ + '-addr_slide=[add an arbitrary slide to each pointer value when it is displayed]:slide size' \ + '-arch[select the specified architecture from a universal file]:arch:(i386 x86_64 x86_64h arm64 arm64e all)' \ '-m[object file names are not assumed to be in archive(member) syntax]' \ '(- *)--version[print version of otool]' \ '*:file:_object_files' && return 0 diff --git a/Completion/Darwin/Command/_shortcuts b/Completion/Darwin/Command/_shortcuts new file mode 100644 index 000000000..5e15f0a07 --- /dev/null +++ b/Completion/Darwin/Command/_shortcuts @@ -0,0 +1,88 @@ +#compdef shortcuts + +_shortcuts() { + local curcontext="$curcontext" + local -a line state + + _arguments -C \ + "1: :->subcommand" \ + "*:: :->args" + + case $state in + subcommand) + _values "subcommand" \ + "run[run a shortcut]" \ + "list[list your shortcuts]" \ + "view[view a shortcut in shortcuts]" \ + "sign[sign a shortcut file]" \ + "help[show subcommand help information]" + ;; + args) + case ${line[1]} in + run) + _shortcuts-run + ;; + list) + _shortcuts-list + ;; + view) + _shortcuts-view + ;; + sign) + _shortcuts-sign + ;; + help) + _shortcuts-help + ;; + esac + ;; + esac +} + +_shortcuts-run() { + _arguments \ + ":shortcut name or identifier:$(_shortcut_options)" \ + {-i,--input-path}'[specify input to provide to the shortcut]:input path:_files' \ + {-o,--output-path}'[specify where to write the shortcut output, if applicable]:output path:_files' \ + '--output-type[specify type to output data in]:output type (Universal Type Identifier format)' \ + {-h,--help}'[show help information]' +} + +_shortcuts-list() { + _arguments \ + {-f,--folder-name}"[specify folder name or identifier to list shortcuts in, or \"none\" to list shortcuts not in a folder]:folder name:$(_shortcut_folder_options)" \ + '--folders[list folders instead of shortcuts]' \ + '--show-identifiers[show identifiers with each result]' \ + {-h,--help}'[show help information]' +} + +_shortcuts-view() { + _arguments \ + ":shortcut name:$(_shortcut_options)" \ + {-h,--help}'[show help information]' +} + +_shortcuts-sign() { + _arguments \ + {-m,--mode}'[specify signing mode]:mode [people-who-know-me]:(anyone people-who-know-me)' \ + {-i,--input}'[specify shortcut file to sign]:input:_files -g "*.shortcut(-.)"' \ + {-o,--output}'[specify output path for the signed shortcut file]:output:_files -g "*.shortcut(-.)"' \ + {-h,--help}'[show help information]' +} + +_shortcuts-help() { + _arguments \ + ":subcommand:(run list view sign help)" +} + +# utilities + +_shortcut_options() { + echo "($(shortcuts list | sed 's/ /\\ /g'))" +} + +_shortcut_folder_options() { + echo "($(shortcuts list --folders | sed 's/ /\\ /g') none)" +} + +_shortcuts "$@" diff --git a/Completion/Darwin/Command/_softwareupdate b/Completion/Darwin/Command/_softwareupdate index 6054fd768..9ac9b9cd2 100644 --- a/Completion/Darwin/Command/_softwareupdate +++ b/Completion/Darwin/Command/_softwareupdate @@ -1,75 +1,110 @@ #compdef softwareupdate -_softwareupdate_ignored_update_name() { - if [[ -z "$_softwareupdate_ignored_updates" ]]; then - local res="$(_call_program pkgs softwareupdate --ignored)" - _softwareupdate_ignored_updates=("${(Qs/, /)${${res#Current ignored updates: \(}%\)}}") - fi - if (( ${#_softwareupdate_ignored_updates} > 0 )); then - _wanted pkgs expl "ignored package" compadd -a _softwareupdate_ignored_updates && return 0 - fi - return 1 +# rebuild cache for available updates everyday (ad hoc) +_softwareupdate_caching_policy() { + local -a newer=( "$1"(Nmd-1) ) + return $#newer } -_softwareupdate_update_name() { - local name line - if [[ -z "$_softwareupdate_updates" ]]; then +# completes available updates (with description) + +_softwareupdate_update_names () { + local name line update_policy ret=1 + local cache_id=softwareupdate-updates + zstyle -s ":completion:${curcontext}:" cache-policy update_policy + if [[ -z "$update_policy" ]]; then + zstyle ":completion:${curcontext}:" cache-policy \ + _softwareupdate_caching_policy + fi + if { [[ ! -v _softwareupdate_updates ]] || _cache_invalid $cache_id } && + ! _retrieve_cache $cache_id; then + # Output format of 'softwareupdate --list' seems to be not stable, + # but at least on macOS 12 and 13 it contains the following two lines + # for each update: + #* Label: update name (may contain spaces) + # Title: description of the update (single TAB before Title:) + # softwareupdate(1) manpage says the '*' before the Label: is replaced + # by '-' for non-recommended updates (but I've never seen it). _softwareupdate_updates=() - for line in ${(f)"$(_call_program pkgs softwareupdate --list)"}; do - if [[ $line == ' '* ]]; then - name="${line# ? }" - elif [[ -n "$name" ]]; then - _softwareupdate_updates+=("$name:${line# }") - name="" + for line in ${(f)"$(_call_program updates softwareupdate --list)"}; do + if [[ $line = [-\*]\ Label:\ (#b)(*) ]]; then + # add '*' or '-' in front of the name; this will be removed later + name=$line[1]$match[1] + elif [[ -n $name && $line = $'\t'Title:\ (#b)(*) ]]; then + _softwareupdate_updates+=( $name:$match[1] ) + name= fi done + _store_cache $cache_id _softwareupdate_updates fi - if (( ${#_softwareupdate_updates} > 0 )); then - _describe -t pkgs "update name" _softwareupdate_updates && return 0 - fi - return 1 + # recommended and non-recommended updates + local rec=( ${${_softwareupdate_updates:#-*}#\*} ) + local non=( ${${(M)_softwareupdate_updates:#-*}#-} ) + _describe -t updates "update" rec && ret=0 + _describe -t non-recommended-updates "non-recommended update" non && ret=0 + return ret +} + +# completes versions of available macOS full installer (with description) + +_softwareupdate_installer_versions () { + local versions=() + for line in ${(f)"$(_call_program installer-versions + softwareupdate --list-full-installers 2>/dev/null)"}; do + if [[ $line = \*\ Title:\ *\ Version:\ (#b)([0-9.]##)* ]]; then + versions+=( ${match[1]}:${line#*Title: } ) + fi + done + _describe -t insteller-versions "version" versions } +# main completion script + _softwareupdate() { - local context state line expl - typeset -A opt_args + local -a specs - _arguments -R \ - '(-h --help -l --list)-q[quiet mode]' \ - {-l,--list}'[list all available updates]:*:' \ - {-d,--download}'[download to directory set in InternetConfig]:*:' \ - {-i,--install}'[install (requires root)]:*: :->install' \ - '--ignored[show or manage ignored updates list (per-user)]:*:: :->ignored' \ - '--schedule[scheduler preferences (per-user)]:automatic checking:(on off)' \ - {-h,--help}'[print command usage]:*:' && return 0 + if (( ${words[(I)(-i|--install)]} == 0 )); then + specs=( + '--no-scan[do not scan when listing or installing updates]' + '--product-types[limit a scan to a particular product type only]:list of product types' + '--products[a comma separated list of product keys to operate on]:list of product keys' + '--force[force an operation to complete]' + '--agree-to-license[agree to the software license agreement without user interaction]' + '--verbose[enable verbose output]' + '(* -)'{-h,--help}'[print command usage]:*:' - case "$state" in - install) - _arguments \ - '(* -a --all)'{-a,--all}'[all available active updates]' \ - '(* -r --req)'{-r,--req}'[all required active updates]' \ - '*:update name:_softwareupdate_update_name' && return 0 - ;; - ignored) - local -a ignored_subcmd - ignored_subcmd=(add remove) + + '(operation)' - if (( CURRENT == 1 )); then - _describe -t commands "subcommand" ignored_subcmd && return 0 - fi - case $words[1] in - add) - _softwareupdate_update_name && return 0 - ;; - remove) - _arguments \ - '(* -a --all)'{-a,--all}'[all available active updates]' \ - '*:update name:_softwareupdate_ignored_update_name' && return 0 - ;; - esac - ;; - esac - return 1 + {-l,--list}'[list all available updates]' + {-d,--download}'[download but not install specified updates]:*: : _softwareupdate_update_names' + {-i,--install}'[download and install specified updates]' + '(* -)--list-full-installers[list the available macOS installers]' + '(* -)--fetch-full-installer[install the latest recommended macOS installer]: :(--full-installer-version): : _softwareupdate_installer_versions' + '--install-rosetta[install Rosetta 2 (Apple Silicon only)]' + '(* -)--schedule[returns the per-machine automatic check preference]' + '--background[trigger a background scan and update operation]' + '(* -)--dump-state[log the internal state of the SU daemon to /var/log/install.log]' + '--evaluate-products[evaluate a list of product keys specified by the --products option]' + '--history[show the install history]' + ) + else # if -i/--install is already on the command line + specs=( + !{-i,--install} + '(-R --restart)'{-R,--restart}'[automatically restart if required to complete installation]' + '--stdinpass[password to authenticate as an owner (Apple Silicon only)]' + '--user[local username to authenticate as an owner (Apple Silicon only)]' + '*: : _softwareupdate_update_names' + + + '(select-updates)' + + '(*)'{-a,--all}'[all updates that are applicable to your system]' + '(*)'{-r,--recommended}'[all updates recommended for your system]' + '(*)--os-only[only macOS updates]' + '(*)--safari-only[only Safari updates]' + ) + fi + + _arguments -s : $specs } _softwareupdate "$@" diff --git a/Completion/Darwin/Command/_sw_vers b/Completion/Darwin/Command/_sw_vers index 11814e0b0..415d3a05c 100644 --- a/Completion/Darwin/Command/_sw_vers +++ b/Completion/Darwin/Command/_sw_vers @@ -1,6 +1,11 @@ #compdef sw_vers +# Only options with a single dash '-' are accepted on Monterey or older, +# but both a single and double dashes are accepted on Ventura (or newer). +# We may replace '-' by '--' when Monterey fades out. + _arguments : \ '(-)-buildVersion[display build version only]' \ '(-)-productName[display product name only]' \ - '(-)-productVersion[display product version only]' + '(-)-productVersion[display product version only]' \ + '(-)-productVersionExtra[display rapid security response version only]' diff --git a/Completion/Darwin/Command/_system_profiler b/Completion/Darwin/Command/_system_profiler index fe197579d..0fd8b473b 100644 --- a/Completion/Darwin/Command/_system_profiler +++ b/Completion/Darwin/Command/_system_profiler @@ -4,17 +4,13 @@ typeset -A opt_args local context state state_descr line local -a _data_types -# TODO: Should this be static? Calling `system_profiler -listDataTypes` takes -# about 0.07-0.08 secs on my machine. Does this list ever change (between -# different versions of OS X)? -_data_types=( SP{AirPort,Applications,Audio,Bluetooth,Camera,CardReader,Component,ConfigurationProfile,DeveloperTools,Diagnostics,DisabledSoftware,DiscBurning,Displays,Ethernet,Extensions,FibreChannel,FireWire,Firewall,Fonts,Frameworks,Hardware,HardwareRAID,InstallHistory,Logs,ManagedClient,Memory,Network,NetworkLocation,NetworkVolume,PCI,ParallelATA,ParallelSCSI,Power,PrefPane,Printers,PrintersSoftware,SAS,SPI,SerialATA,Software,StartupItem,Storage,SyncServices,Thunderbolt,USB,UniversalAccess,WWAN}DataType ) -# the dynamic alternative is: -#_data_types=( ${${(f)"$(_call_program path system_profiler -listDataTypes 2>/dev/null)"}[2,-1]} ) +_data_types=( ${${(f)"$(_call_program data-types system_profiler -listDataTypes 2>/dev/null)"}[2,-1]} ) _arguments \ '(- *)-usage' \ '(- *)-listDataTypes[lists the available datatypes]' \ - '(-listDataTypes -usage)-xml[generate xml output]' \ + '(-listDataTypes -usage -json)-xml[generate xml output]' \ + '(-listDataTypes -usage -xml)-json[generate json output]' \ '(-listDataTypes -usage)-detailLevel[level of detail for the report]:detail level:(mini basic full)' \ - '(-listDataTypes -usage)-timeout+[maximum time to wait in seconds]' \ + '(-listDataTypes -usage)-timeout+[maximum time to wait in seconds(0 means no timeout)]:timeout seconds' \ '(-listDataTypes -usage)*:data type:'"($_data_types)" diff --git a/Completion/Darwin/Command/_trash b/Completion/Darwin/Command/_trash deleted file mode 100644 index 658716432..000000000 --- a/Completion/Darwin/Command/_trash +++ /dev/null @@ -1,22 +0,0 @@ -#compdef trash - -# We only provide completion for Ali Rantakari's trash utility. There are/were a -# few others floating around with that name, but this is the one available as -# `trash` in Homebrew and MacPorts -_pick_variant ali='(Rantakari|hasseg)' other --version && { - # The hidden options here are options to rm that trash silently (and - # undocumentedly) ignores. Some options are not made mutually exclusive where - # they technically could be, for compatibility with aliases, etc. - _arguments -s -S -A '-*' : \ - '!-'{d,f,i,r,P,R,W} \ - '(: * -F -l -v)-e[empty trash]' \ - '-F[use Finder instead of system API]' \ - '(: * -e -F -s -y)-l[list items in trash]' \ - '(: * -F -l -v)-s[securely empty trash]' \ - '-v[increase output verbosity]' \ - '-y[skip confirmation prompts (with -e or -s)]' \ - '*: :_files' - return -} - -_default diff --git a/Completion/Debian/Command/_apt b/Completion/Debian/Command/_apt index 494d3bf82..19f818c27 100644 --- a/Completion/Debian/Command/_apt +++ b/Completion/Debian/Command/_apt @@ -422,15 +422,14 @@ _apt-cmd () { /$'[^\0/=]#='/ /'[]'/ ':apt-package-versions:package version:_apt_versions_of_binary_package' \| \ \) \ \) \| \ - /$'(remove|reinstall|purge)\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ + /$'((|auto)(remove|purge)|reinstall)\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ /$'upgrade\0'/ \| \ /$'autoclean\0'/ \| \ /$'changelog\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" avail' \# \| \ - /$'autoremove\0'/ \| \ /$'full-upgrade\0'/ \| \ /$'dist-upgrade\0'/ \| \ /$'edit-sources\0'/ \| \ - /"[]"/ ':argument-1::compadd "$expl_action[@]" list search showsrc show depends rdepends policy update install reinstall download source build-dep remove upgrade full-upgrade dist-upgrade edit-sources autoclean changelog autoremove purge' + /"[]"/ ':argument-1::compadd "$expl_action[@]" list search showsrc show depends rdepends policy update install reinstall download source build-dep remove upgrade full-upgrade dist-upgrade edit-sources autoclean changelog autopurge autoremove purge' _apt-cmd () { local expl_action expl_packages subcmd @@ -487,19 +486,16 @@ _apt-get () { /$'[^\0/=]#='/ /'[]'/ ':apt-package-versions:package version:_apt_versions_of_binary_package' \ \) \ \) \| \ - /$'remove\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ - /$'purge\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ + /$'(|auto)(purge|remove)\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ /$'dist-upgrade\0'/ \| \ /$'dselect-upgrade\0'/ \| \ /$'clean\0'/ \| \ /$'autoclean\0'/ \| \ /$'changelog\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" avail' \# \| \ /$'check\0'/ \| \ - /$'autoremove\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ /$'help\0/' \| \ - /$'markauto\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ - /$'unmarkauto\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ - /"[]"/ ':argument-1::compadd "$expl_action[@]" update upgrade install remove purge dist-upgrade dselect-upgrade clean autoclean changelog check source build-dep autoremove help markauto unmarkauto download' + /$'(|un)markauto\0'/ /$'[^\0]#\0'/ ':packages::_deb_packages "$expl_packages[@]" installed' \# \| \ + /"[]"/ ':argument-1::compadd "$expl_action[@]" update upgrade install remove purge dist-upgrade dselect-upgrade clean autoclean changelog check source build-dep autopurge autoremove help markauto unmarkauto download' _apt-get () { local expl_action expl_packages diff --git a/Completion/Debian/Command/_sbuild b/Completion/Debian/Command/_sbuild index a32b5e8c5..459738d5d 100644 --- a/Completion/Debian/Command/_sbuild +++ b/Completion/Debian/Command/_sbuild @@ -124,7 +124,7 @@ _sbuild() { '--aspcud-criteria=[Optimization for aspcud]:criteria' \ '(--resolve-alternatives --no-resolve-alternatives)--resolve-alternatives[allow alternatives in Build-Depends*]' \ '(--resolve-alternatives --no-resolve-alternatives)--no-resolve-alternatives[disallow alternatives in Build-Depends*]' \ - '--extra-package=[make a package or directory available to the resolver]:package:_files -g "*deb(-.)' \ + '--extra-package=[make a package or directory available to the resolver]:package:_files -g "*deb(-.)"' \ '--extra-repository=[add a repository to the resolver]:url' \ '--extra-repository-key=[add key to the resolver]:key:_files -g "*.asc(-.)"' \ '--build-path=[place to build the package inside chroot]:path:_files -/' \ diff --git a/Completion/Linux/Command/_btrfs b/Completion/Linux/Command/_btrfs index 1d87fd83a..d8b97a200 100644 --- a/Completion/Linux/Command/_btrfs +++ b/Completion/Linux/Command/_btrfs @@ -8,16 +8,16 @@ groups=( subvolume filesystem device scrub balance inspect-internal property quota qgroup replace rescue check restore send receive help version ) cmds_1=( create delete list snapshot get-default set-default find-new show sync help ) -cmds_2=( df du show sync defragment resize label usage help ) +cmds_2=( df du show sync defragment resize label mkswapfile usage help ) cmds_3=( add delete remove ready scan stats usage help ) cmds_4=( start cancel resume status help ) cmds_5=( start pause cancel resume status ) -cmds_6=( dump-{super,tree} {inode,logical,subvolid}-resolve min-dev-size rootid tree-stats help ) +cmds_6=( dump-{super,tree} {inode,logical,subvolid}-resolve map-swapfile min-dev-size rootid tree-stats help ) cmds_7=( get set list ) cmds_8=( enable disable rescan help ) -cmds_9=( assign remove create destroy show limit help ) +cmds_9=( assign remove create clear-stale destroy show limit help ) cmds_10=( start status cancel help ) -cmds_11=( chunk-recover fix-device-size super-recover zero-log create-control-device ) +cmds_11=( chunk-recover clear-uuid-tree fix-device-size super-recover zero-log create-control-device ) _arguments -C -A "-*" "$args[@]" \ '(- *)--help[print help information]' \ @@ -25,6 +25,7 @@ _arguments -C -A "-*" "$args[@]" \ '(-v --verbose -q --quiet --help --version)'{-v,--verbose}'[verbose output of operation]' \ '(-v --verbose -q --quiet --help --version)'{-q,--quiet}'[suppress all messages except errors]' \ '(--help --version)--format=[specify output format]:format:(text json)' \ + '(--help --version)--log=[set log level]:level:(default info verbose debug quiet)' \ '(--version)1: :->groups' \ '2: :->cmds' \ '*:: :->args' && ret=0 @@ -151,7 +152,7 @@ while (( $#state )); do filesystem:defragment) args+=( '!-v' '-r[defragment files recursively]' - '-c+[compress files while defragmenting]::compression algorithm:(zlib lzo zstd)' + '-c-[compress files while defragmenting]::compression algorithm:(zlib lzo zstd)' '-r[defragment files recursively]' '-f[flush after defragmenting]' '-s[start position]: :_numbers -u bytes -d "beginning of file" offset K M G T P E' @@ -171,6 +172,13 @@ while (( $#state )); do '1: :_guard "^-*" uuid or label' ) ;; + filesystem:mkswapfile) + args+=( + '-s[size]: :_numbers -d "2GiB" size K M G T P E' + '(-u --uuid)'{-u,--uuid}'[specify a uuid to use]:uuid:(clear random time)' + ':file:_files' + ) + ;; filesystem:usage) args+=( '-T[show data in tabular format]' );; device:(add|delete|ready|remove)) args+=( @@ -194,6 +202,7 @@ while (( $#state )); do args+=( '(-c --check)'{-c,--check}'[return non-zero if any stat counter is not zero]' '(-z --reset)'{-z,--reset}'[reset stats when done]' + '-T[show current stats in tabular format]' "1:device or mountpoint:_files -g '*(-%,/)'" ) ;; @@ -233,7 +242,7 @@ while (( $#state )); do ;; balance:status) args+=( '!-v' '!--verbose' '1:path:_files -/' );; balance:(pause|cancel|resume)) args+=( '1:path:_files -/' );; - property:set) args+=( '3:value' );& + property:set) args+=( '-f[force the change]' '3:value' );& property:get) args+=( '2:property:(ro label compression)' );& property:list) args+=( @@ -244,8 +253,9 @@ while (( $#state )); do quota:(enable|disable)) args+=( '1:path:_files -/' );; quota:rescan) args+=( - '-s[show status of currently running rescan]' - '-w[wait for rescan to finish]' + '(-s --status)'{-s,--status}'[show status of currently running rescan]' + '(-w --wait -W --wait-norescan)'{-w,--wait}'[wait for rescan to finish]' + '(-w --wait -W --wait-norescan)'{-w,--wait-norescan}'[wait for rescan to finish without starting it]' '1:path:_files -/' ) ;; @@ -268,11 +278,14 @@ while (( $#state )); do '-F[list impacted qgroups \(include ancestral qgroups\)]' '-f[list impacted qgroups \(exclude ancestral qgroups\)]' '--sort=-[sort qgroups]:sort:_values -s , sort \ - qgroupid rfer excl max_rfer max_excl' + qgroupid rfer excl max_rfer max_excl path' '--sync[do filesystem sync before getting information]' '1:path:_files -/' ) ;; + qgroup:clear-stale) + args+=( '(-q --quiet)'{-q,--quiet}'[print only errors]' '1:path:_files -/' ) + ;; qgroup:limit) args+=( '-c[limit amount of data after compression]' @@ -287,6 +300,7 @@ while (( $#state )); do '-r[read from specified source device only]:srcdev:_files' '-f[force overwriting of target]' "-B[don't background]" + '(-K --nodiscard)'{-K,--nodiscard}"[don't perform whole device TRIM]" ':srcdev or devid:_files' ':target:_files' ':path:->mounts' @@ -332,6 +346,12 @@ while (( $#state )); do '2:filesystem path:_files -/' ) ;; + inspect*:map-swapfile) + args+=( + '(-r --resume-offset)'{-r,--resume-offset}'[print only the value suitable as resume offset for file /sys/power/resume_offset]' + ':file:_files' + ) + ;; inspect*:min*) args+=( '--id[specify the device id to query]:device id [1]' );; inspect*:rootid) args+=( '1:path:_files -/' );; inspect*:tree*) args+=( '-b[print raw numbers in bytes]' );; @@ -395,6 +415,8 @@ while (( $#state )); do '*-c[use snapshot as clone source]:clone:_files -/' '-f[specify output file]:file:_files' '--no-data[send in NO_FILE_DATA mode]' + '--proto[specify protocol version]:version' + '--compressed-data[send data that is compressed on the filesystem directly without decompressing it]' '1:subvolume:_files -/' ) ;; @@ -405,6 +427,7 @@ while (( $#state )); do '(-C --chroot)'{-C,--chroot}'[confine the process to destination path using chroot(1)]' '(-E --max-errors)'{-E,--max-errors}'[terminate as soon as specified number of errors occur]:errors [1]' '(--dump)-m[specify root mount point of the destination filesystem]:mount point:_directories' + '--force-decompress[if the stream contains compressed data, always decompress it]' '(-m)--dump[dump stream metadata, one line per operation]' '1:mount:->mounts' ) diff --git a/Completion/Linux/Command/_chcon b/Completion/Linux/Command/_chcon deleted file mode 100644 index 2d523f287..000000000 --- a/Completion/Linux/Command/_chcon +++ /dev/null @@ -1,24 +0,0 @@ -#compdef chcon - -local ign - -(( $#words > 2 )) && ign='!' -_arguments -C -s -S \ - '(-h --no-dereference)--dereference[dereference symlinks]' \ - '(-h --no-dereference --dereference)'{-h,--no-dereference}'[operate on symlinks themselves]' \ - '(1 -u --user -r --role -l --range -t --type)--reference=[copy security context of specified file]:file:_files' \ - '(1 --reference -u --user)'{-u+,--user=}'[set user in the target security context]: :_selinux_users' \ - '(1 --reference -r --role)'{-r+,--role=}'[set role in the target security context]: :_selinux_roles' \ - '(1 --reference -t --type)'{-t+,--type=}'[set type in the target security context]: :_selinux_types' \ - '(1 --reference -l --range)'{-l+,--range=}'[set range in the target security context]:selinux range' \ - '(--recursive -R)'{--recursive,-R}'[recurse subdirectories]' \ - '(-v --verbose)'{-v,--verbose}'[output a diagnostic for every file processed]' \ - '(-H -L -P)-H[follow symlinks on the command line]' \ - '(-H -L -P)-L[follow all symlinks]' \ - "(-H -L -P)-P[don't follow symlinks (default)]" \ - '!(--preserve-root)--no-preserve-root' \ - "--preserve-root[fail to operate recursively on '/']" \ - '(--reference -u --user -r --role -l --range -t --type)1:security context:_selinux_contexts' \ - "${ign}--help[display help information]" \ - "${ign}--version[display version information]" \ - '*:file:_files' diff --git a/Completion/Linux/Command/_chrt b/Completion/Linux/Command/_chrt index 6789b66cf..5431b0799 100644 --- a/Completion/Linux/Command/_chrt +++ b/Completion/Linux/Command/_chrt @@ -62,7 +62,7 @@ elif (( CURRENT == 1 )); then else shift words (( CURRENT-- )) - _normal && ret=0 + _normal -p $service && ret=0 fi return ret diff --git a/Completion/Linux/Command/_cpupower b/Completion/Linux/Command/_cpupower index 6763bdd12..d342b69d9 100644 --- a/Completion/Linux/Command/_cpupower +++ b/Completion/Linux/Command/_cpupower @@ -95,7 +95,7 @@ case $state in '-i+[measurement interval]:interval (seconds)' '-c[schedule on every core]' '-v[increase verbosity]' - '*:::command: _normal' + '*:::command: _normal -p $service' ) ;; esac diff --git a/Completion/Linux/Command/_ethtool b/Completion/Linux/Command/_ethtool index 95a8bbfb6..3e3fc0b1d 100644 --- a/Completion/Linux/Command/_ethtool +++ b/Completion/Linux/Command/_ethtool @@ -4,7 +4,7 @@ local curcontext="$curcontext" local -a state line expl cmds local -A opt_args -_arguments -C \ +_arguments -C -A "-*" \ '--debug[turn on debugging messages]:mask:((1\:parser\ information))' \ '--json[output results in JSON]' \ '(-I --include-statistics)'{-I,--include-statistics}'[include command-related statistics in the output]' \ @@ -59,12 +59,21 @@ _arguments -C \ '--cable-test[perform cable test and report the results]' \ '--cable-test-tdr[perform cable test and report Time Domain Reflectometer data]' \ '--show-tunnels[show tunnel-related device capabilities and state]' \ + '--show-module[show transceiver module settings]' \ + '--set-module[set transceiver module settings]' \ + '--get-plca-cfg[get PLCA configuration]' \ + '--set-plca-cfg[set PLCA configuration]' \ + '--get-plca-status[get PLCA status information]' \ + '--show-mm[show MAC merge layer state]' \ + '--set-mm[set MAC merge layer parameters]' \ + '--show-pse[show settings for power sourcing equipment]' \ + '--set-pse[set power sourcing equipment settings]' \ '--monitor[listen to netlink notifications and displays them]::command:( --all -s --change -k --show-features --show-offload -K --features --offload --show-priv-flags --set-priv-flags -g --show-ring -G --set-ring -l --show-channels -L --set-channels -c --show-coalesce -C --coalesce -a --show-pause -A --pause --show-eee --set-eee - --cable-test --cable-test-tdr + --cable-test --cable-test-tdr --show-module --set-module )' && return if [[ -n $state ]]; then @@ -79,22 +88,30 @@ if [[ -n $state ]]; then fi ;; autoneg|adaptive-[rt]x|raw|hex|sg|tso|ufo|gso|lro|eee|tx-lpi|downshift) ;& - fast-link-down|energy-detect-power-down|mode) + cqe-mode-[rt]x|fast-link-down|energy-detect-power-down|mode) ;& + [tr]x-push|enable|*-enabled) _wanted onoff expl 'enabled' compadd off on ;; rx-usecs|rx-frames|rx-usecs-irq|rx-frames-irq|tx-usecs|tx-frames) ;& tx-usecs-irq|tx-frames-irq|stats-block-usecs|pkt-rate-low|rx-usecs-low) ;& rx-frames-low|tx-usecs-low|tx-frames-low|pkt-rate-high|rx-usecs-high) ;& - rx-frames-high|tx-usecs-high|tx-frames-high|sample-interval|dmac|rx-mini) ;& - rx-jumbo|offset|length|magic|value|phyad|proto|tos|tclass|l4proto|src-port) ;& + rx-frames-high|tx-usecs-high|tx-frames-high|sample-interval|dmac) ;& + tx-aggr-max-bytes|tx-aggr-max-frame|tx-aggr-time-usec) ;& + rx-mini|rx-jumbo|rx-buf-len|cqe-size|tx-push-buf-len) ;& + offset|length|magic|value|phyad|proto|tos|tclass|l4proto|src-port) ;& dst-port|spi|l4data|vlan-etype|vlan|user-def|action|vf|queue|loc) ;& page|bank|i2c|first|last|step|pair|lanes) ;& - rx-copybreak|tx-copybreak|pfc-prevention-tout) ;& - other|combined|tx-timer|count|msecs) + rx-copybreak|tx-copybreak|tx-buf-size|pfc-prevention-tout) ;& + other|combined|tx-timer|count|msecs) ;& + node-id|node-cnt|to-tmr|burst-cnt|burst-tmr) ;& + tx-min-frag-size) _message -e numbers 'number' ;; + podl-pse-admin-control) + _wanted values expl 'value' compadd enable disable + ;; speed) - _wanted -x speed expl 'speed' compadd 10 100 1000 + _wanted -x speed expl 'speed' compadd 10 100 1000 ;; duplex) _wanted duplex expl 'duplex mode' compadd half full @@ -166,8 +183,14 @@ if [[ -n $state ]]; then context) _message -e contexts 'RSS context' ;; + power-mode-policy) + _wanted policies expl 'policy' compadd high auto + ;; *) case ${${(Mk)opt_args:#cmd?*}[1]#cmd?-} in + -a|--show-pause) + _arguments '--src=-:source:(aggregate emac pmac)' + ;; -A|--pause) _values -S ' ' -w 'pause parameter' \ 'autoneg[specify if pause autonegotiation is enabled]' \ @@ -177,14 +200,16 @@ if [[ -n $state ]]; then -C|--coalesce) _wanted settings expl 'coalescing setting' compadd -F line -M 'r:|-=* r:|=*' - \ adaptive-{r,t}x {r,t}x-{usecs,frames}{,-irq,-high,-low} \ - stats-block-usecs pkt-rate-{low,high} sample-interval + stats-block-usecs pkt-rate-{low,high} sample-interval cqe-mode-{r,t}x \ + tx-aggr-{max-bytes,max-frames,time-usecs} ;; -G|--set-ring) _values -S ' ' -w 'ring parameter' \ 'rx[change number of ring entries for the RX ring]' \ 'rx-mini[change number of ring entries for the RX Mini ring]' \ 'rx-jumbo[change number of ring entries for the RX Jumbo ring]' \ - 'tx[change number of ring entries for the TX ring]' + 'tx[change number of ring entries for the TX ring]' \ + rx-buf-len cqe-size tx-push rx-push tx-push-buf-len ;; -d|--register-dump) _values -S ' ' -w 'option' \ @@ -216,7 +241,9 @@ if [[ -n $state ]]; then (( CURRENT = 4 )) && _message -e length 'duration (seconds)' ;; -S|--statistics) - _arguments '(-)--all-groups' '(-)--groups:eth-phy: :eth-mac: :eth-ctrl: :rmon' + _arguments '(-)--all-groups' \ + '(-)--groups:eth-phy: :eth-mac: :eth-ctrl: :rmon' \ + '--src=-:source:(aggregate emac pmac)' \ ;; -t|--test) _values -S ' ' -w 'test mode' \ @@ -318,7 +345,7 @@ if [[ -n $state ]]; then ;; --[gs]et-tunable) _wanted options expl tunable compadd rx-copybreak tx-copybreak \ - pfc-prevention-tout + tx-buf-size pfc-prevention-tout ;; --reset) _wanted components expl component compadd flags dedicated all \ @@ -341,6 +368,13 @@ if [[ -n $state ]]; then --cable-test-tdr) _wanted options expl 'distance options' compadd first last step pair ;; + --set-module) + _wanted options expl tunable compadd power-mode-policy + ;; + --set-plca-cfg) + _wanted options expl tunable compadd enable node-id node-cnt \ + to-tmr burst-cnt burst-tmr + ;; esac ;; esac diff --git a/Completion/Linux/Command/_findmnt b/Completion/Linux/Command/_findmnt index 0c832364d..b29372c39 100644 --- a/Completion/Linux/Command/_findmnt +++ b/Completion/Linux/Command/_findmnt @@ -26,6 +26,7 @@ _arguments -s -C \ '(H -o --output)--output-all[output all available columns]' \ '(H -p --poll)'{-p+,--poll=}'[monitor changes in /proc/self/mountinfo]::action:(mount umount remount move)' \ '(H --real)--pseudo[print only pseudo-filesystems]' \ + '(H)--shadowed[print only filesystems over-mounted by another filesystem]' \ '(H -R --submounts)'{-R,--submounts}'[print recursively all submounts]' \ '(H --pseudo)--real[print only real filesystems]' \ '(H -S --source :)'{-S+,--source=}'[specify the mount source]: :->sources' \ @@ -35,9 +36,11 @@ _arguments -s -C \ '(H -U --uniq)'{-U,--uniq}'[ignore filesystems with duplicated mount targets]' \ '(H -u --notruncate)'{-u,--notruncate}'[do not truncate text in columns]' \ '(H -v --nofsroot)'{-v,--nofsroot}'[do not print \[/dir\] in the SOURCE column]' \ + '(H -y --shell -n --noheadings)'{-y,--shell}'[use column names usable as shell variable identifiers]' \ '(H -w --timeout)'{-w+,--timeout}'[specify timeout for --poll]:milliseconds: ' \ '(H -x --verify)'{-x,--verify}'[check mount table content]' \ '(H)--verbose[print more information]' \ + '(H)--vfs-all[print all VFS options]' \ '(H)1: :->sources_targets' \ '(H)2:: :->targets' \ + '(format)' \ diff --git a/Completion/Linux/Command/_free b/Completion/Linux/Command/_free index 6d74e4a0d..a0da97446 100644 --- a/Completion/Linux/Command/_free +++ b/Completion/Linux/Command/_free @@ -3,6 +3,7 @@ _arguments -s \ '(-l --lohi)'{-l,--lohi}'[show detailed low and high memory statistics]' \ '(-t --total)'{-t,--total}'[show total for RAM + swap]' \ + '(-v --committed)'{-v,--committed}'[show committed memory and commit limit]' \ '(-w --wide)'{-w,--wide}'[wide mode]' \ '(-s --seconds)'{-s,--seconds}'[specify the delay between display]:seconds: ' \ '(-c --count)'{-c+,--count=}'[specify the display count]:count: ' \ diff --git a/Completion/Linux/Command/_fusermount b/Completion/Linux/Command/_fusermount index d55eca29c..24f9a8018 100644 --- a/Completion/Linux/Command/_fusermount +++ b/Completion/Linux/Command/_fusermount @@ -1,4 +1,4 @@ -#compdef fusermount +#compdef fusermount fusermount3 local expl context state line typeset -A opt_args diff --git a/Completion/Linux/Command/_gpasswd b/Completion/Linux/Command/_gpasswd index 24fe361b0..d5d16ebba 100644 --- a/Completion/Linux/Command/_gpasswd +++ b/Completion/Linux/Command/_gpasswd @@ -5,7 +5,7 @@ _arguments -s \ '(-d --delete -a --add)'{-d,--delete}'[remove user from group]: : _users' \ '(-)'{-h,--help}'[display help]' \ '(-Q --root)'{-Q,--root}'[specify directory to chroot into]: : _files -/' \ - '(-r --remove-password)'{-r,--remove-password}'[remove the group password]' \ + '(-r --delete-password)'{-r,--delete-password}'[remove the group password]' \ '(-R --restrict)'{-R,--restrict}'[restrict access to GROUP to its members]' \ '(-M --members -A --administrators)'{-M,--members}'[set the list of members of GROUP]: :_sequence _users' \ '(-A --administrators -M --members)'{-A,--administrators}'[set the list of admins for GROUP]: :_sequence _users' \ diff --git a/Completion/Linux/Command/_ionice b/Completion/Linux/Command/_ionice index ba403ca56..9989cd6a9 100644 --- a/Completion/Linux/Command/_ionice +++ b/Completion/Linux/Command/_ionice @@ -28,7 +28,7 @@ if [[ -n $state ]]; then elif (( $+opt_args[args--u] || $+opt_args[args---uid] )); then _message -e uids 'user id' else - _normal && ret=0 + _normal -p $service && ret=0 fi fi diff --git a/Completion/Linux/Command/_iptables b/Completion/Linux/Command/_iptables index 27c801da1..892c48710 100644 --- a/Completion/Linux/Command/_iptables +++ b/Completion/Linux/Command/_iptables @@ -1,7 +1,7 @@ -#compdef iptables iptables-save iptables-restore ip6tables ip6tables-save ip6tables-restore +#compdef iptables iptables-save iptables-restore ip6tables ip6tables-save ip6tables-restore arptables ebtables -local curcontext="$curcontext" state line expl i ret=1 -local -a cmds rcmds ropts rules states prev args +local curcontext="$curcontext" i ret=1 +local -a state line expl cmds rcmds ropts rules states prev args case $service in iptables-save | ip6tables-save) @@ -24,12 +24,12 @@ cmds=( -P --policy -E --rename-chain -h --help -V --version ) ropts=( - -p --protocol -s --src --source -d --dst --destination -j --jump -i + -p --proto --protocol -s --src --source -d --dst --destination -j --jump -i --in-interface -o --out-interface -f --fragment -c --set-counters ) prev=( ${words[1,CURRENT-1]} ) -case ${prev[${prev[(I)-p|--protocol]}+1]}; in +case ${prev[${prev[(I)-p|--proto|--protocol]}+1]}; in tcp) args=( '--tcp-flags[match based on TCP flags in a packet]: :->tcp-flags: :->tcp-flags' @@ -92,7 +92,42 @@ while (( i=words[(ib.i.)-m|--match]+1 )) (( i<CURRENT )); do case ${words[i]}; in - ah) args+=( '--ahspi[match SPIs in AH header]:*^!:spi' ) ;; + addrtype) + args+=( + '--src-type[match if the source address is of given type]:type:->address-types' + '--dst-type[match if the destination address is of given type]:type:->address-types' + '(--limit-iface-out)--limit-iface-in[limit to interface the packet is coming in]' + '(--limit-iface-in)--limit-iface-out[limit to interface the packet is going out]' + ) + ;; + ah) + args+=( '--ahspi[match SPIs in AH header]:*^!:spi' ) + [[ $service = ip6* ]] && args+=( + '--ahlen[total length of this header]:length (octets)' + '--ahres[match if the reserved field is filled with zero]' + ) + ;; + bpf) + args+=( + '--object-pinned[pass a path to a pinned eBPF object]:path:_files' + '--bytecode[pass BPF byte code as generated by nfbpf_compile]:code' + ) + ;; + cgroup) + args+=( + '--path[match cgroup2 membership]:path:_files -W /sys/fs/cgroup' + '--cgroup[match cgroup net_cls classid]:classid' + ) + ;; + cluster) + args+=( + '--cluster-total-nodes[set number of total nodes in cluster]:number' + '--cluster-local-node[set the local node number ID]:number' + '--cluster-local-nodemask[set the local node number ID mask]:mask' + '--cluster-hash-seed[set seed value of the Jenkins hash]:value' + ) + ;; + comment) args+=( '--comment[add comment to rule]:comment' ) ;; conntrack) args+=( '--ctstate[match packet state]:state:->cfstates' @@ -160,30 +195,34 @@ _arguments -C -s \ '(-)'{-V,--version}'[print version information]' \ '(-h --help -V --version)'{-t,--table}'[specify table]:table:(filter nat mangle raw security)' \ "($rcmds $cmds)"{-A,--append}'[append rules to end of specified chain]:chain:->chains' \ + {-C,--check}'[check for the existence of a rule]' \ "($rcmds $cmds -c --set-counters)"{-D,--delete}'[delete rules from specified chain]:chain:->chains::rule number:->rulenums' \ "($rcmds $cmds)"{-I,--insert}'[insert rules before specified rule number]:chain:->chains::rule number:->rulenums' \ "($rcmds $cmds)"{-R,--replace}'[replace a rule]:chain:->chains::rule number:->rulenums' \ - "($rcmds "${(j. .)cmds:#(-Z|--zero)}" $ropts)"{-L,--list}'[list rules in selected chain]::chain:->chains' \ + "($rcmds "${(j. .)cmds:#(-Z|--zero)}" $ropts)"{-L,--list}'[list rules in selected chain]::chain:->chains:rule number:->rulenums' \ + '(-L --list -S --list-rules)'{-S,--list-rules}'[list rules in the form of options to iptables]::chain:->chains::rule number:->rulenums' \ "($rcmds $cmds $ropts)"{-F,--flush}'[flush specified chain (delete all rules)]::chain:->chains' \ "($rcmds "${(j. .)cmds:#(-L|--list)}" $ropts)"{-Z,--zero}'[zero the packet and byte counters]::chain:->chains' \ "($rcmds $cmds)"{-N,--new,--new-chain}'[create a new user-defined chain]:chain name' \ "($rcmds $cmds)"{-X,--delete-chain}'[delete a user-defined chain]:: :->user-chains' \ "($rcmds $cmds)"{-P,--policy}'[set the policy for a chain to given target]:chain:->chains:target:->targets' \ "($rcmds $cmds)"{-E,--rename-chain}'[rename a user-defined chain]:old chain:->user-chains:new chain name' \ - "($cmds -p --protocol)"{-p,--protocol}'[specify protocol of rule]:*^!:protocol:(! tcp udp icmp all)' \ - "($cmds -s --src --source)"{-s,--src,--source}'[specify source]:*^!:network:_hosts' \ - "($cmds -d --dst --destination)"{-d,--dst,--destination}'[specify destination]:*^!:network:_hosts' \ + "($cmds -p --proto --protocol)"{-p,--proto,--protocol}'[specify protocol of rule]:*^!:protocol:(! tcp udp icmp all)' \ + "($cmds -s --src --source)"{-s,--src,--source}'[specify source]:*^!:network:_sequence _hosts' \ + "($cmds -d --dst --destination)"{-d,--dst,--destination}'[specify destination]:*^!:network:_sequence _hosts' \ "($cmds -j --jump)"{-j,--jump}'[specify rule target]:target:->targets' \ "($cmds -i --in-interface)"{-i,--in-interface}'[specify interface via which packet is received]:*^!:interface:_net_interfaces' \ "($cmds -o --out-interface)"{-o,--out-interface}'[specify interface via which packet is to be sent]:*^!:interface:_net_interfaces' \ "($cmds -f --fragment)"{-f,--fragment}'[match second or further fragments only]' \ "($cmds -D --delete -c --set-counters)"{-c,--set-counters}'[initialise packet and byte counters]:packets: :bytes' \ '(-v --verbose)'{-v,--verbose}'[enable verbose output]' \ + '(-w --wait)'{-w,--wait}'[specify maximum wait to acquire xtables lock before giving up]: :_numbers -u seconds -d 1 wait' \ + '(-W --wait-interval)'{-W,--wait-interval}'[specify wait time to try to acquire xtables lock]: :_numbers -u usecs -d "1 second" wait' \ '(-n --numeric)'{-n,--numeric}'[print IP addresses and port numbers in numeric format]' \ '(-x --exact)'{-x,--exact}'[expand numbers (display exact values)]' \ '--line-numbers[print line numbers when listing]' \ '--modprobe=[specify command to load modules with]:command:_command_names -e' \ - "($cmds)*"{-m,--match}'[extended match (may load extension)]:extension:(ah conntrack dscp esp helper icmp length limit mac mark multiport owner physdev pkttype state tcp tos ttl udp unclean)' \ + "($cmds)*"{-m,--match}'[extended match (may load extension)]:extension:(addrtype ah bpf cgroup cluster comment connbytes connlabel connlimit connmark conntrack cpu dccp devgroup dscp dsr ecn esp eui64 frag hashlimit hbh helper hl icmp icmp6 iprange ipv6header ipvs length limit mac mark mh multiport nfacct osf owner physdev pkttype policy quota rateest realm recent rpfilter rt sctp set socket state statistic string tcp tcpmss time tos ttl u32 udp unclean)' \ "$args[@]" && ret=0 case "$state" in @@ -230,6 +269,11 @@ case "$state" in [[ "$state" = cf* ]] && states+=( SNAT DNAT ) _values -s , 'state' $states && return ;; + address-types) + _wanted address-types expl 'address type' compadd \ + UNSPEC UNICAST LOCAL BROADCAST ANYCAST MULTICAST \ + BLACKHOLE UNREACHABLE PROHIBIT THROW NAT XRESOLVE && ret=0 + ;; port-list) compset -P '*,' if compset -S ',*'; then diff --git a/Completion/Linux/Command/_lsblk b/Completion/Linux/Command/_lsblk index 8a9bc18bf..63aac743c 100644 --- a/Completion/Linux/Command/_lsblk +++ b/Completion/Linux/Command/_lsblk @@ -6,16 +6,19 @@ local curcontext="$curcontext" state line expl typeset -A opt_args _arguments -C -s -S \ + '(H -A --noempty)'{-A,--noempty}"[don't print empty devices]" \ '(H -E --dedup)'{-E+,--dedup=}'[de-duplicate output by specified column]:column:->columns' \ '(H -a --all)'{-a,--all}'[print all devices]' \ '(H -b --bytes)'{-b,--bytes}'[print size in bytes rather than in human readable format]' \ '(H -d --nodeps)'{-d,--nodeps}"[don't print slaves or holders]" \ '(H -I --include)*'{-e,--exclude}'[exclude devices by major number]:major device number:->majorlist' \ '(H -e --exclude)*'{-I+,--include=}'[show only devices with specified major numbers]:major device number:->majorlist' \ - '(H -n --noheadings)'{-n,--noheadings}"[don't print headings]" \ + '(H -n --noheadings -y --shell)'{-n,--noheadings}"[don't print headings]" \ '(H -p --paths)'{-p,--paths}'[print complete device path]' \ '(H -s --inverse)'{-s,--inverse}'[reverse dependency order]' \ + '(H -w --width)'{-w+,--width=}'[specify output width]:width' \ '(H -x --sort)'{-x+,--sort=}'[sort output by specified column]:column:->columns' \ + '(H -y --shell -n --noheadings)'{-y,--shell}'[use column names usable as shell variable identifiers]' \ '(H)--sysroot=[use specified directory as system root]:directory:_directories' \ '*:device:_files -g "*(-%b)" -P / -W /' \ + fields \ @@ -24,6 +27,8 @@ _arguments -C -s -S \ '(H -f --fs -o --output -O --output-all)'{-f,--fs}'[output info about filesystems]' \ '(H -m --perms -o --output -O --output-all)'{-m,--perms}'[output info about permissions]' \ '(H -S --scsi -o --output -O --output-all)'{-S,--scsi}'[output info about SCSI devices]' \ + '(H -N --nvme -o --output -O --output-all)'{-N,--nvme}'[output info about NVMe devices]' \ + '(H -v --virtio -o --output -O --output-all)'{-v,--virtio}'[output info about virtio devices]' \ '(H -t --topology -o --output -O --output-all)'{-t,--topology}'[output info about topology]' \ '(H fields)'{-o+,--output=}'[specify output columns]:output column:->columnlist' \ '(H fields)'{-O,--output-all}'[output all columns]' \ diff --git a/Completion/Linux/Command/_networkmanager b/Completion/Linux/Command/_networkmanager index 1e05252b2..d44c313db 100644 --- a/Completion/Linux/Command/_networkmanager +++ b/Completion/Linux/Command/_networkmanager @@ -42,8 +42,24 @@ _nm_fields() { } _nm_general() { - _arguments "1:command:(status hostname permissions logging help)" - # TODO: provide completions for logging + local curcontext="$curcontext" state line + _arguments "1:command:(status hostname permissions logging reload help)" \ + "*::arguments:->args" + + case $line[1] in + l*) + _values -w -S ' ' values \ + 'level:level' \ + 'domains:domain' + ;; + r*) + _describe -t flags 'flag' '( + "conf:NetworkManager.conf configuration" + "dns-rc:update DNS configuration" + "dns-full:restart the DNS plugin" + )' + ;; + esac } _nm_networking() { diff --git a/Completion/Linux/Command/_pidof b/Completion/Linux/Command/_pidof index dd0649ce9..151a0e0f6 100644 --- a/Completion/Linux/Command/_pidof +++ b/Completion/Linux/Command/_pidof @@ -3,19 +3,51 @@ local curcontext="$curcontext" state line expl ret=1 typeset -A opt_args -local exargs="-h --help -V --version" -_arguments -C -s -w \ - '(- *)'{-h,--help}'[display help information]' \ - '(- *)'{-V,--version}'[print program version]' \ - "(-s --single-shot $exargs)"{-s,--single-shot}'[return one PID only]' \ - "(-c --check-root $exargs)"{-c,--check-root}'[omit processes with different root]' \ - '-q[quiet mode, only set the exit code]' \ - '(-w --with-workers)'{-w,--with-workers}'[show kernel workers too]' \ - "(-x $exargs)"-x'[include shells running named scripts]' \ - "($exargs)"\*{-o+,--omit-pid=}'[omit processes with PIDs]:pids:_sequence -s , _pids' \ - '(-S --separator)'{-S+,--separator=}'[specify separator put between PIDs]:separator' \ - '*:process:->procnames' \ - && return 0 +_pick_variant -r variant procps='--separator' $OSTYPE -h + +case $variant in + (procps) + local exargs="-h --help -V --version" + _arguments -C -s -w \ + '(- *)'{-h,--help}'[display help information]' \ + '(- *)'{-V,--version}'[print program version]' \ + "(-s --single-shot $exargs)"{-s,--single-shot}'[return one PID only]' \ + "(-c --check-root $exargs)"{-c,--check-root}'[omit processes with different root]' \ + '-q[quiet mode, only set the exit code]' \ + '(-w --with-workers)'{-w,--with-workers}'[show kernel workers too]' \ + "(-x $exargs)"-x'[include shells running named scripts]' \ + "($exargs)"\*{-o+,--omit-pid=}'[omit processes with PIDs]:pids:_sequence -s , _pids' \ + '(-S --separator)'{-S+,--separator=}'[specify separator put between PIDs]:separator' \ + '*:process:->procnames' \ + && return 0 + ;; + (darwin*) + # Night Production pidof + _arguments -s -w \ + '(- *)'{-h,-\?}'[display help information]' \ + '(- *)-v[print out version info on pidof]' \ + '-l[print output in long format]' \ + '-k[kill processes by name]' \ + '*:process:_process_names -a' \ + && return 0 + ;; + (*) + # sysvinit-utils + _arguments -C -s -w \ + '(- *)-h[display help information]' \ + '-c[return PIDs with the same root directory]' \ + '-d[use the provided character as output separator]:separator' \ + '-n[avoid using stat system function on network shares]' \ + '-o[omit results with a given PID]:pid:_sequence -s , _pids' \ + '-s[return one PID only]' \ + '-q[quiet mode. Do not display output]' \ + '-s[only return one PID]' \ + '-x[return PIDs of shells running scripts with a matching name]' \ + '-z[list zombie and I/O waiting processes. May cause pidof to hang]' \ + '*:process:->procnames' \ + && return 0 + ;; +esac case $state in procnames) diff --git a/Completion/Linux/Command/_selinux b/Completion/Linux/Command/_selinux new file mode 100644 index 000000000..a7ba68952 --- /dev/null +++ b/Completion/Linux/Command/_selinux @@ -0,0 +1,796 @@ +#compdef audit2allow audit2why avcstat chcon checkmodule checkpolicy fixfiles getpidprevcon getsebool matchpathcon newrole restorecon runcon sealert secon sedta seinfo selinuxconlist selinuxdefcon selinuxexeccon semanage semodule semodule_unpackage sepolgen sepolicy sesearch sestatus setenforce setsebool validatetrans + +# encompasses checkpolicy libselinux-utils policycoreutils +# policycoreutils-devel policycoreutils-python-utils setools-console +# setools-console-analyses setroubleshoot-server and a few utilities from +# coreutils + +_selinux_attributes() { + local -a seattrs expl + + seattrs=( ${(f)"$(_call_program selinux-attributes seinfo --flat -a)"} ) + _description selinux-attrs expl "selinux attribute" + compadd "$@" "$expl[@]" -a seattrs +} + +_selinux_bools() { + local -a sebools expl + + sebools=( ${(f)"$(_call_program selinux-bools seinfo --flat -b)"} ) + _description selinux-bools expl "selinux boolean" + compadd "$@" "$expl[@]" -a sebools +} + +_selinux_categories() { + local -a secats expl + + secats=( ${(f)"$(_call_program selinux-categories seinfo --flat --category)"} ) + _description selinux-categories expl "selinux category" + compadd "$@" "$expl[@]" -a secats +} + +_selinux_classes() { + local -a seclasses expl + + seclasses=( ${(f)"$(_call_program selinux-classes seinfo --flat -c)"} ) + _description selinux-classes expl "selinux object class" + compadd "$@" "$expl[@]" -a seclasses +} + +_selinux_commons() { + local -a secommons expl + + secommons=( ${(f)"$(_call_program selinux-commons seinfo --flat --common)"} ) + _description selinux-commons expl "selinux common permission set" + compadd "$@" "$expl[@]" -a secommons +} + +_selinux_interfaces() { + local -a seints expl + + seints=( ${(f)"$(_call_program selinux-interfaces sepolicy interface -l)"} ) + _description selinux-interfaces expl "selinux interface" + compadd "$@" "$expl[@]" -a seints +} + +_selinux_permissions() { + local -a seperms expl + + seperms=( ${${${${(f)"$(_call_program selinux-permissions seinfo -c --flat -x)"}:#[^[:blank:]]*}#[[:blank:]]}:1} ) + _description selinux-permissions expl "selinux permission" + compadd "$@" "$expl[@]" -a seperms +} + +_selinux_sids() { + local -a sesids expl + + sesids=( ${(f)"$(_call_program selinux-sids seinfo --flat --initialsid)"} ) + _description selinux-sids expl "selinux SID" + compadd "$@" "$expl[@]" -a sesids +} + +_selinux_sens() { + local -a sens expl + + sesids=( ${(f)"$(_call_program selinux-sens seinfo --flat --initialsid)"} ) + _description selinux-sensitivities expl "selinux sensitivity" + compadd "$@" "$expl[@]" -a sesids +} + +_selinux_modules() { + local -a modules expl + + modules=( ${(f)"$(_call_program selinux-modules semodule -l)"} ) + _description selinux-modules expl "selinux module" + compadd "$@" "$expl[@]" -a modules +} + +local curcontext="$curcontext" ret=1 +local -A opt_args +local -a args sepolgen state state_descr line +local ign +(( $#words > 2 )) && ign='!' + +sepolgen=( + "${ign}(-h --help)"{-h,--help}'[display help information]' + '(--application --cgi --dbus --inetd --init --admin_user --confined_admin --desktop_user --newtype --sandbox --x_user)'*{-d+,--domain=}'[specify domain to expand]:domain:_selinux_types -a domain' + \*{-r+,--role=}'[specify role(s) to which the administrator domain will transition]: :_selinux_roles' + \*{-u+,--user=}'[specify SELinux user(s) which will transition to this domain]: :_selinux_users' + \*{-a+,--admin=}'[specify domain(s) which this confined admin will administrate]:admin domain:_selinux_types' + '(-n --name)'{-n+,--name=}'[specify name of policy to generate]:name' + '(--admin_user --confined_admin --desktop_user --newtype --sandbox --x_user)*'{-t+,--type=}'[specify type(s) for which you will generate new definition and rule(s)]:type:_selinux_types' + '(-p --path)'{-p+,--path=}'[specify path in which the generated policy files will be stored]:path:_directories' + '(--newtype)*'{-w+,--writepath=}'[specify path to which the confined processes will need to write]:path:_directories' + '1:command:_files' + + '(application)' + "(-d)--application[generate 'User Application' policy]" + "(-d)--cgi[generate 'Web Application/Script (CGI)' policy]" + "(-d)--dbus[generate 'DBUS System Daemon' policy]" + "(-d)--inetd[generate 'Internet Services Daemon' policy]" + "(-d)--init[generate 'Standard Init Daemon' policy]" + "(-d -t 1)--admin_user[generate 'Administrator Login User Role' policy]" + "(-d -t 1)--confined_admin[generate 'Confined Root Administrator Role' policy]" + "(1)--customize[generate 'Existing Domain Type' policy]" + "(-d -t 1)--desktop_user[generate 'Desktop Login User Role' policy]" + "(-d -w 1)--newtype[generate 'Module information for a new type' policy]" + "(-d -t 1)--sandbox[generate 'Sandbox' policy]" + "(-d -t 1)--term_user[generate 'Minimal Terminal Login User Role' policy]" + "(-d -t 1)--x_user[generate 'Minimal X Windows Login User Role' policy]" +) + +case $service in + check(module|policy)) + args=( + '(-b --binary)'{-b,--binary}'[read an existing binary policy file rather than a source policy.conf file]' + '(-C --cil)'{-C,--cil}'[write CIL policy file rather than binary policy file]' + '(-E --werror)'{-E,--werror}'[treat warnings as errors]' + "${ign}(-h --help)"{-h,--help}'[display help information]' + '(-U --handle-unknown)'{-U+,--handle-unknown=}'[specify how the kernel should handle unknown classes or permissions]:action:(deny allow reject)' + '(-M --mls)'{-M,--mls}'[enable the MLS policy when checking and compiling the policy]' + '(-o --output)'{-o+,--output=}'[write a policy file]:file:_files' + '-c+[specify the policy version]:policy version [latest]' + ':input file:_files' + ) + ;| + + audit2(allow|why)) + args=( + '(-b --boot -i --input)'{-b,--boot}'[audit messages since last boot]' + '(-a --all -i --input -d --dmesg)'{-a,--all}'[read input from audit log]' + '(-p --policy)'{-p+,--policy=}'[specify policy file to use for analysis]:file:_files' + '(-d --dmesg -a --all -i --input)'{-d,--dmesg}'[read input from dmesg]' + '(-i --input -a --all -b --boot)'{-i+,--input=}'[read input from file]:file:_files' + '(-l --lastreload)'{-l,--lastreload}'[read input only after the last reload]' + '(-r --requires)'{-r,--requires}'[generate require statements for rules]' + '(-m --module -M --module-package -r --requires)'{-m+,--module=}'[set the module name]:module name:_selinux_modules' + '(-M --module-package -o --output -m --module)'{-M+,--module-package=}'[generate a module package]:module package:_files' + '(-o --output -M --module-package)'{-o+,--output=}'[append output to file]:file:_files' + '(-D --dontaudit)'{-D,--dontaudit}'[generate policy with dontaudit rules]' + '(-R --reference)'{-R,--reference}'[use installed macros in generated policy]' + '!(-R --reference -N --noreference)'{-N,--noreference} + '(-v --verbose)'{-v,--verbose}'[explain generated output]' + '(-e --explain)'{-e,--explain}'[fully explain generated output]' + '(-t --type)'{-t+,--type=}'[only process messages with type matching regex]:type' + '--perm-map=[specify file name of perm map]:file:_files' + '--interface-info=[specify file name of interface information]:file:_files' + '(-x --xperms)'{-x,--xperms}'[generate extended permission rules]' + '--debug[leave generated modules for -M]' + '(-w --why)'{-w,--why}'[translate SELinux audit messages into a description of why the access was denied]' + "${ign}(-h --help)"{-h,--help}'[display help information]' + "${ign}--version[display version information]" + ) + ;; + + avcstat) + args=( + '-c[cumulative]' + '-f+[specify AVC statistics file]:file [/sys/fs/selinux/avc/cache_stats]:_files' + ': :_guard "^-*" "interval (seconds)"' + ) + ;; + + chcon) + args=( -S + '(-h --no-dereference)--dereference[dereference symlinks]' \ + '(-h --no-dereference --dereference)'{-h,--no-dereference}'[operate on symlinks themselves]' \ + '(1 -u --user -r --role -l --range -t --type)--reference=[copy security context of specified file]:file:_files' \ + '(1 --reference -u --user)'{-u+,--user=}'[set user in the target security context]: :_selinux_users' \ + '(1 --reference -r --role)'{-r+,--role=}'[set role in the target security context]: :_selinux_roles' \ + '(1 --reference -t --type)'{-t+,--type=}'[set type in the target security context]: :_selinux_types' \ + '(1 --reference -l --range)'{-l+,--range=}'[set range in the target security context]:selinux range' \ + '(--recursive -R)'{--recursive,-R}'[recurse subdirectories]' \ + '(-v --verbose)'{-v,--verbose}'[output a diagnostic for every file processed]' \ + '(-H -L -P)-H[follow symlinks on the command line]' \ + '(-H -L -P)-L[follow all symlinks]' \ + "(-H -L -P)-P[don't follow symlinks (default)]" \ + '!(--preserve-root)--no-preserve-root' \ + "--preserve-root[fail to operate recursively on '/']" \ + '(--reference -u --user -r --role -l --range -t --type)1:security context:_selinux_contexts' \ + "${ign}--help[display help information]" \ + "${ign}--version[display version information]" \ + '*:file:_files' + ) + ;; + + checkmodule) + args=( + "${ign}(-)"{-V,--version}'[show policy versions created by this program]' + '-m[build a policy module instead of a base module]' + '-c+[build a policy module targeting a modular policy version]:version (4-21)' + ) + ;; + + checkpolicy) + args=( + '(-F --conf)'{-F,--conf}'[write policy.conf file rather than binary policy file]' + '(-d --debug)'{-d,--debug}'[enter debug mode after loading the policy]' + '(-S --sort)'{-S,--sort}'[sort ocontexts before writing out the binary policy]' + '(-t --target)'{-t+,--target=}'[specify the target platform]:platform:(selinux xen)' + '(-O --optimize)'{-O,--optimize}'[optimize the final kernel policy (remove redundant rules)]' + "${ign}(-)"{-V,--version}'[display version information]' + ) + ;; + + fixfiles) + args=( + '-B[record current date in /.autorelabel to speed later labeling]' + '-F[force reset of context to match file_context for customizable files]' + '-f[clear /tmp directory without prompt for removal]' + '-R+[discover files from specified rpm packages]:package' + '-C+[run a diff on the specified file]:file:_files' + '-N+[only act on files created after the specified date]:date (YYYY-MM-DD HH\:MM):_dates' + '-v[show changes in file labels]' + '-T+[specify number of threads to use]:threads' + '1::action:(check verify restore relabel onboot)' + '*:file:_files' + ) + ;; + + getpidprevcon) + _pids + return + ;; + + getsebool) + args=( + '(:)-a[show all booleans]' + '(-a):boolean:_selinux_bools' + ) + ;; + + matchpathcon) + args=( + '-m+[force file type for the lookup]:type:(file dir pipe chr_file blk_file lnk_file sock_file)' + "-n[don't display path]" + "-N[don't use translations]" + '-f+[use alternate file_context file]:file:_files' + '-p+[use prefix to speed translations]:prefix' + '-P+[use alternate policy root path]:path:_directories' + '-V[verify file context on disk matches defaults]' + '*:file path:_files' + ) + ;; + + newrole) + local cmd cpp + cmd="$words[1]" + cpp='_comp_priv_prefix=( $cmd ${(kv)opt_args[(I)-([rtl]|-role|-type|-level)]} )' + args=( + '(-r --role)'{-r+,--role=}'[specify role]: :_selinux_roles' + '(-t --type)'{-t+,--type=}'[specify type]: :_selinux_types' + '(-l --level)'{-l+,--range=}'[specify level]:level' + '(-p --preserve-environment)'{-p,--preserve-environment}"[don't create new minimal environment]" + "${ign}(-)"{-V,--version}'[display version information]' + "(-)1: :{ $cpp; _command_names -e }" \ + "*:: :{ $cpp; _normal }" + ) + ;; + + restorecon) + args=( + '*-e+[exclude a directory]:directory:_directories' + '-f+[provide list of files to be processed]:file:_files' + '-F[force reset of context to match file_context for customizable files]' + "-i[ignore files that don't exist]" + '-I[ignore digest to force checking of labels even if SHA256 digest matches]' + '-D[set or update any directory SHA256 digests]' + '-m[include non-seclabel mounts in relabeling checks]' + "-n[don't change any file labels (passive check)]" + '(-v)-p[show progress]' + '(-R -r)'{-R,-r}'[change file labels recursively]' + '(-p)-v[show changes in file labels]' + '-W[display warnings about entries that had no matching files]' + '-0[expect NUL characters as input filename separators]' + "-x[don't cross file system boundaries]" + '-T+[specify number of threads to use]:threads' + "${ign}(-)"{-h,-\?}'[display help information]' + '*:file path:_files' + ) + ;; + + runcon) + args=( + '(1 -c --compute)'{-c,--compute}'[compute process transition context before modifying]' + '(1 -t --type)'{-t+,--type=}'[specify type]: :_selinux_types' + '(1 -u --user)'{-u+,--user=}'[specify user identity]: :_selinux_users' + '(1 -r --role)'{-r+,--role=}'[specify role]: :_selinux_roles' + '(1 -l --range)'{-l+,--range=}'[specify level range]:range' + '(-)1:security context:_selinux_contexts' + '*:::args:_normal' + ) + ;; + + sealert) + args=( + '(-b --browser)'{-b,--browser}'[launch the browser]' + '(-s --service -S --noservice)'{-s,--service}'[start sealert as a dbus service]' + '(-S --noservice -s --service)'{-S,--noservice}'[start sealert without dbus service as standalone app]' + '(-l --lookupid)'{-l+,--lookupid=}'[lookup alert by id, id may be wildcard * to lookup all alerts]:id' + '(-a --analyze)'{-a+,--analyze=}'[scan a log file, analyze its AVCs]:log file:_files' + '(-u --user)'{-u+,--user=}'[logon user name]:username' + '(-p --password)'{-p+,--password=}'[logon user password]:password' + '(-P --plugin)'{-P+,--plugin=}'[specify plugin name, required for -f]:plugin name' + '(-f --fix)'{-f+,--fix=}'[fix avc with the given uuid, requires plugin]:uuid' + "${ign}(-)"{-h,--help}'[display help information]' + ) + ;; + + secon) + args=( + "${ign}(-)"{-h,--help}'[display help information]' + "${ign}(-)--version[display version information]" + '(-P --prompt)'{-P,--prompt}'[output in a format good for a prompt]' + '(-u --user)'{-u,--user}'[show user of the context]' + '(-r --role)'{-r,--role}'[show role of the context]' + '(-t --type)'{-t,--type}'[show type of the context]' + '(-s --sensitivity)'{-s,--sensitivity}'[show sensitivity level of the context]' + '(-c --clearance)'{-c,--clearance}'[show clearance level of the context]' + '(-m --mls-range)'{-m,--mls-range}'[show sensitivity to clearance range of]' + '(-R --raw)'{-R,--raw}'[output context in "raw" format]' + '(-C --color)'{-C,--color}'[output using ANSI color codes (requires -P)]' + + '(context)' + {--self,--current}'[get context for the current process]' + {--self-exec,--current-exec}'[get exec context for the current process]' + {--self-fs,--current-fs}'[get fs context for the current process]' + {--self-key,--current-key}'[get key context for the current process]' + '--parent[get context for the parent process]' + '--parent-exec[get exec context for the parent process]' + '--parent-fs[get fs context for the parent process]' + '--parent-key[get key context for the parent process]' + {-p+,--pid=}'[context from the specified pid]:pid:_pids' + '--pid-exec[use exec context from the specified pid]:pid:_pids' + '--pid-fs[use fs context from the specified pid]:pid:_pids' + '--pid-key[use key context from the specified pid]:pid:_pids' + {-f+,--file=}'[use context from the specified file]:file:_files' + {-L+,--link=}"[use context from the specified file, doesn't follow symlinks]:file:_files" + ':context:_selinux_contexts' + ) + ;; + + sedta) + args=( + '(-p --policy)'{-p+,--policy=}'[specify path to SELinux policy to analyze]:policy:_files' + '(-s --source)'{-s+,--source=}'[specify source type of the analysis]:source:_selinux_types -a domain' + '(-t --target)'{-t+,--target=}'[specify target type of the analysis]:target:_selinux_types -a domain' + '--full[print rule lists for transitions]' + '--stats[display statistics at the end of the analysis]' + '(-v --verbose)'{-v,--verbose}'[extra informational messages]' + '--debug[enable debugging]' + '(-S --shortest_path)'{-S,--shortest_path}'[calculate all shortest paths]' + '(-A --all_paths)'{-A+,--all_paths=}'[calculate all paths]:max steps' + '(-r --reverse)'{-r,--reverse}'[perform a reverse DTA]' + '(-l --limit_trans)'{-l+,--limit_trans=}'[limit to the specified number of transitions]:limit' + '*:excluded domain:_selinux_types -a domain' + "${ign}(- *)"{-h,--help}'[display help information]' + "${ign}(-)--version[display version information]" + ) + ;; + + seinfo) + args=( + '(-a --attribute)'{-a,--attribute}'[list attributes or print named attribute]:: :_selinux_attributes' + '(-b --bool)'{-b,--bool}'[list booleans or print named boolean]:: :_selinux_bools' + '(-c --class)'{-c,--class}'[list object classes or print named object class]:: :_selinux_classes' + '(-r --role)'{-r,--role}'[list roles or print named role]:: :_selinux_roles' + '(-t --type)'{-t,--type}'[list types or print named type]:: :_selinux_types' + '(-u --user)'{-u,--user}'[list users or print named user]:: :_selinux_users' + '--category[list categories or print named category]:: :_selinux_categories' + '--common[list common permission sets or print named common]:: :_selinux_commons' + '--constrain[list constraints or print constraints for named object class]:: :_selinux_classes' + '--default[list default_* statements or print statements for named object class]:: :_selinux_classes' + '--fs_use[list fs_use_* statements or print statements for named filesystem type]:: :_file_systems' + '--genfscon[list genfscon statements or print statements for named filesystem type]:: :_file_systems' + '--initialsid[list initial SIDs or print named SID]:: : _selinux_sids' + '--netifcon[list netif contexts or print for named interface]:: : _net_interfaces' + '--nodecon[list node contexts or print statement for node with specified address]::address' + '--permissive[list permissive types or print named statement]::type' + '--polcap[list policy capabilities or print named statement]::type' + '--portcon[list port contexts or print statements for port range]::port range' + '--sensitivity[list sensitivities or print named sensitivity]:: :_selinux_sens' + '--typebounds[list type bounds or print named bound type]:: :_selinux_typebounds' + '--validatetrans[list validatetrans rules or print constraints for named object class]:: :_selinux_classes' + '--all[list all components]' + '(-x --expand)'{-x,--expand}'[print additional details]' + '--flat[exclude headers and indentation in output]' + '(-v --verbose)'{-v,--verbose}'[print additional informational messages]' + '--debug[enable debugging output]' + "${ign}--help[display help information]" + "${ign}--version[display version information]" + ':policy:_files' + ) + ;; + + selinuxconlist) + args=( + '-l+[specify mcs/mls level]:level' + ':user:_selinux_users' + ':context:_selinux_contexts' + ) + ;; + + selinuxdefcon) + args=( + '-l+[specify mcs/mls level]:level' + ':user:_users' + ':context:_selinux_contexts' + ) + ;; + + selinuxexeccon) + args=( + '1:command:_files -g "*(-*)"' + '2:from context:_selinux_contexts' + ) + ;; + + semanage) + _arguments -C \ + {-h,--help}'[display help information]' \ + ': :->command' \ + '*::: := ->option-or-argument' && ret=0 + + case $state in + command) + local -a subcmds + + subcmds=( + import:'import local customizations' + export:'output local customizations' + login:'manage login mappings between linux users and SELinux confined users' + user:'manage SELinux confined users (Roles and levels for an SELinux user)' + port:'manage network port type definitions' + interface:'manage network interface type definitions' + module:'manage SELinux policy modules' + node:'manage network node type definitions' + fcontext:'manage file context mapping definitions' + boolean:'manage booleans to selectively enable functionality' + permissive:'manage process type enforcement mode' + dontaudit:'disable/enable dontaudit rules in policy' + ibpkey:'manage infiniband pkey type definitions' + ibendport:'manage infiniband end port type definitions' + ) + + _describe -t commands command subcmds + return + ;; + option-or-argument) + (( $#words > 2 )) && ign='!' || ign='' + curcontext=${curcontext%:*}-$line[1]: + args=( + "${ign}(-)"{-h,--help}'[display help information]' + '(-S --store)'{-S+,--store=}'[select an alternate SELinux Policy Store to manage]:store:_files' + ) + + case $line[1] in + ^export) + args+=( '(-N --noreload)'{-N,--noreload}"[don't reload policy after commit]" ) + ;| + boolean|fcontext|ibendport|ibpkey|interface|login|module|node|port|user) + args+=( '(-C --locallist)'{-C,--locallist}'[list local customizations]' ) + ;| + boolean|fcontext|ibendport|ibpkey|interface|login|module|node|permissive|port|user) + args+=( + '(-n --noheading)'{-n,--noheading}"[don't print list heading]" + '(-l --list)'{-l,--list}'[list records]' + '(-E --extract)'{-E,--extract}'[extract customizable commands, for use within a transaction]' + ) + ;| + fcontext|ibendport|ibpkey|interface|login|module|node|permissive|port|user) + args+=( '(-a --add)'{-a,--add}'[add a record]' ) + ;| + boolean|fcontext|ibendport|ibpkey|interface|login|node|permissive|port|user) + args+=( + '(-d --delete)'{-d,--delete}'[delete a record]' + '(-D --deleteall)'{-D,--deleteall}'[remove all local customizations]' + ) + ;| + boolean|fcontext|ibendport|ibpkey|interface|login|node|port|user) + args+=( '(-m --modify)'{-m,--modify}'[modify a record]' ) + ;| + fcontext|login) + args+=( '(-s --seuser)'{-s+,--seuser=}'[SELinux user name]:seuser:_selinux_users' ) + ;| + fcontext|ibendport|ibpkey|interface|node|port) + args+=( '(-t --type)'{-t+,--type=}'[SELinux Type for the object]:type:_selinux_contexts -a file_type' ) + ;| + fcontext|ibendport|ibpkey|interface|login|node|port|user) + args+=( '(-r --range)'{-r+,--range=}'[specify MLS/MCS Security Range]:range' ) + ;| + + import) + args+=( '(-f --input_file)'{-f+,--input_file=}'[specify input file]:input file:_files' ) + ;; + export) + args+=( '(-f --output_file)'{-f+,--output_file=}'[specify output file]:output_file' ) + ;; + login) + args+=( '(-l --list)1: :{ compset -P % && _groups || _users }' ) + ;; + user) + args+=( + '(-L --level)'{-L,--level}'[default SELinux Level for SELinux user, s0 Default. (MLS/MCS Systems only)]:level' + \*{-R,--roles}'[specify SELinux Roles]:roles:_selinux_roles' + ': :_selinux_users' + ) + ;; + port) + args+=( + '(-p --proto)'{-p+,--proto=}'[specify protocol for the specified port]:protocol:(tcp udp dccp sctp)' + ': :_ports' + ) + ;| + interface) + args+=( ': :_selinux_interfaces' ) + ;; + module) + args+=( + '(-P --priority)'{-P+,--priority=}'[select a priority for module operations]:priority [400]' + '(-E --extract)'{-E,--extract}'[extract customizable commands, for use within a transaction]' + '(-a --add)'{-a,--add}'[add a module]:module name:_selinux_modules' + '(-r --remove)'{-r,--remove}'[remove a module]:module name:_selinux_modules' + '(-d --disable)'{-d,--disable}'[disable a module]:module name:_selinux_modules' + '(-e --enable)'{-e,--enable}'[enable a module]:module name:_selinux_modules' + ) + ;; + node) + args+=( + '(-p --proto)'{-p+,--proto=}'[specify protocol for the specified node]:protocol:(ipv4 ipv6)' + '(-M --netmask)'{-M+,--netmask=}'[specify network mask]:netmask' + ':node:' + ) + ;; + fcontext) + args+=( + '(-e --equal)'{-e+,--equal=}'[substitute target path with sourcepath when generating default label]:equal' + '(-f --ftype)'{-f+,--ftype=}'[specify file type]:file type:(( + f\:regular\ file + d\:directory + c\:character\ device + b\:block device + s\:socket + l\:symbolic\ link + p\:named\ pipe))' + ':file spec (regex):_files' + ) + ;; + boolean) + args+=( + '(-)'{-1,--on}'[enable]' + '(-)'{-0,--off}'[disable]' + ':boolean:_selinux_bools' + ) + ;; + permissive) + args+=( '1:type:_selinux_types' ) + ;; + dontaudit) + args+=( '1:value:(on off)' ) + ;; + ibpkey) + args+=( + '(-x --subnet_prefix)'{-x,--subnet_prefix}'[specify subnet prefix for the specified infiniband ibpkey]:subnet prefix' + ':pkey:' + ) + ;; + ibendport) + args+=( + '(-z --ibdev_name)'{-z+,--ibdev_name=}'[specify name for the specified infiniband end port]:ibdev name' + ) + ;; + esac + ;; + esac + ;; + + semodule) + args=( + \*{-R,--reload}'[force a reload of policy]' + \*{-B,--build}'[build and reload policy]' + \*'--refresh[like --build but reuse existing linked policy if module files unchanged]' + \*{-D,--disable_dontaudit}'[remove dontaudits from policy]' + \*{-i+,--install=}'[install a new module]:module package:_files -g "*.(pp|cil)(-.)"' + \!{-b,--base,-u,--upgrade}':module package:_files -g "*.(pp|cil)(-.)"' + \*{-r+,--remove=}'[remove existing module at desired priority]:module name:_selinux_modules' + \*{-l+,--list-modules=-}'[display list of installed modules]::kind:(( + standard\:highest\ priority,\ enabled\ modules + full\:list\ all\ modules + ))' + \*{-X+,--priority=}'[set priority for following operations]:priority (1-999)' + \*{-e,--enable=}'[enable module]:module name:_selinux_modules' + \*{-d,--disable=}'[disable module]:module name:_selinux_modules' + \*{-E,--extract=}'[extract module]:module name:_selinux_modules' + '(-s --store)'{-s+,--store=}'[name of the store to operate on]:store' + '(-N -n --noreload)'{-N,-n,--noreload}"[don't reload policy after commit]" + '(-v --verbose)'{-v,--verbose}'[be verbose]' + '(-P --preserve_tunables)'{-P,--preserve_tunables}'[preserve tunables in policy]' + '(-C --ignore-module-cache)'{-C,--ignore-module-cache}'[rebuild CIL modules compiled from HLL files]' + '(-p --path)'{-p,--path}'[use an alternate path for the policy root]' + '(-S --store-path)'{-S+,--store-path=}'[use an alternate path for the policy store root]:path:_directories' + '(-c --cil)'{-c,--cil}'[extract module as cil; only affects module extraction]' + '(-H --hll)'{-H,--hll}'[extract module as hll; only affects module extraction]' + '(-m --checksum)'{-m,--checksum}'[add SHA256 checksum of modules to the list output]' + '!(--refresh)--rebuild-if-modules-changed' + "${ign}(-)"{-h,--help}'[display help information]' + ) + ;; + + semodule_unpackage) + args=( + ':pp file:_files -g "*.pp(-.)"' + ':mod file:_files -g "*.mod(-.)"' + ':fc file:_files -g "*.fc(-.)"' + ) + ;; + + sepolgen) + args=( $sepolgen ) + ;; + sepolicy) + _arguments -C \ + '-P+[specify policy to examine]' \ + "${ign}(- 1)-h[display help information]" \ + '1:command:(( + booleans\:"get description of booleans" + communicate\:"query if domains can communicate with each other" + generate\:"generate policy module template" + gui\:"graphical user interface for policies" + interface\:"list policy interfaces" + manpage\:"generate man pages for policies" + network\:"query policy network information" + transition\:"query policy to see how a source process domain can transition to the target process domain"))' \ + '*::: := ->option-or-argument' && ret=0 + case $state in + option-or-argument) + curcontext=${curcontext%:*}-$line[1]: + args=( '(-)'{-h,--help}'[display help information]' ) + case $line[1] in + transition|communicate) + args+=( + '(-s --source)'{-s+,--source=}'[specify source domain]:source:_selinux_types -a domain' + '(-t --target)'{-t+,--target=}'[specify target domain]:target:_selinux_types -a domain' + ) + ;| + manpage|network) + args+=( + {-d,--domain}'[specify domain]:*: :_selinux_types -a domain' + '!*'{-d-,--domain=-}': :_selinux_types -a domain' + ) + ;| + booleans) + args+=( + '(-)'{-a,--all}'[get all booleans descriptions]' + \*{-b,--boolean}'[specify boolean to show description]:*:boolean:_selinux_bools' + '!(-a --all -h --help)*'{-b-,--boolean=}': :_selinux_bools' + ) + ;; + communicate) + args+=( + '(-c --class)'{-c+,--class=}'[specify class to use for communications]:tclass [file]:_selinux_classes' + '(-S --sourceaccess)'{-S+,--sourceaccess=}'[specify permissions for the source type to use]:source access [open,write]' + '(-T --targetaccess)'{-T+,--targetaccess=}'[specify permissions for the target type to use]:target access [open,read]' + ) + ;; + generate) + args=( $sepolgen ) + ;; + interface) + args+=( + '(-c --compile)'{-c,--compile}'[run compile test for selected interface]' + '(-v --verbose)'{-v,--verbose}'[show verbose information]' + '(-f --file)'{-f+,--file=}'[specify interface file]:interface file:_files' + '(-a --list_admin)'{-a,--list_admin}'[list all domains with admin interface - DOMAIN_admin()]' + '(-u --list_user)'{-u,--list_user}'[list all domains with SELinux user role interface - DOMAIN_role()]' + '(-l --list)'{-l,--list}'[list all interfaces]' + {-i,--interfaces}'[specify interface names]:*:interface:_selinux_interfaces' + '!*'{-i-,--interfaces=-}':interface:_selinux_interfaces' + ) + ;; + manpage) + args+=( + '(-p --path)'{-p+,--path=}'[specify path in which the generated selinux man pages will be stored]:path:_directories' + '(-o --os)'{-o+,--os=}'[specify name of the OS for man pages]:OS' + '(-w --web)'(-w,--web)'[generate HTML man pages structure]' + '(-r --root)'{-r+,--root=}'[specify alternate root directory]:root [/]:_directories' + '--source_files[alternative root path needs to include file context files and policy.xml file]' + '(-a --all -d --domain)'{-a,--all}'[all domains]' + ) + ;; + network) + args+=( + '(-l --list)'{-l,--list}'[list all SELinux port types]' + {-p,--port}'[specify type related to the port]:*:port number' + '!*'{-p-,--port=-}':port number' + {-t,--type}'[show ports defined for this SELinux type]:*:port type:_selinux_types -a port_type' + '!*'{-t-,--type=-}':port type:_selinux_types -a port_type' + {-d,--domain}'[specify domain]:*:domain:_selinux_types -a domain' + '!*'{-d-,--domain=-}':domain:_selinux_types -a domain' + {-a,--application}'[show ports to which this application can bind and/or connect]:*:application:_selinux_types -a application_domain_type' + '!*'{-a-,--application=-}':domain:_selinux_types -a application_domain_type' # am not sure this is what is meant by applications + ) + ;; + esac + ;; + esac + ;; + + sesearch) + args=( + "${ign}(-h --help)"{-h,--help}'[display help information]' + "${ign}--version[display version information]" + '(-v --verbose)'{-v,--verbose}'[print extra informational messages]' + '--debug[enable debugging]' + '-A[search allow and allowxperm rules]' + '--allow[search allow rules]' + '--allowxperm[search allowxperm rules]' + '--auditallow[search auditallow rules]' + '--auditallowxperm[search auditallowxperm rules]' + '--dontaudit[search dontaudit rules]' + '--dontauditxperm[search dontauditxperm rules]' + '--neverallow[search neverallow rules]' + '--neverallowxperm[search neverallowxperm rules]' + '(-T --type_trans)'{-T,--type_trans}'[search type_transition rules]' + '--type_change[search type_change rules]' + '--type_member[search type_member rules]' + '--role_allow[find role allow rules]' + '--role_trans[find range_transition rules]' + '--range_trans[search range_transition rules]' + '(-s --source)'{-s+,--source=}'[source type/role of the TE/RBAC rule]: : _alternative + "types\:type\:_selinux_types" + "roles\:role\:_selinux_attributes"' + '(-t --target)'{-t+,--target=}'[target type/role of the TE/RBAC rule]: : _alternative + "types\:type\:_selinux_types" + "roles\:role\:_selinux_attributes"' + '(-c --class)'{-c+,--class=}'[comma separated list of object classes]:class:_sequence _selinux_classes' + '(-p --perms)'{-p+,--perms=}'[comma separated list of permissions]: :_sequence _selinux_permissions' + '(-x --xperms)'{-x+,--xperms=}'[comma separated list of extended permissions]:xperms' + '(-D --default)'{-D+,--default=}'[default of the rule. (type/role/range transition rules]:default' + '(-b --bool)'{-b+,--bool=}'[comma separated list of Booleans in the conditional expression]:bool ' + '-eb[match Boolean list exactly instead of matching any listed boolean]' + '-ep[match permission set exactly instead of matching any listed permission]' + '-ex[match extended permission set exactly instead of matching any listed permission]' + '-Sp[match rules where the listed permissions are a subset of the rule permissions]' + '-ds[match source attributes directly instead of matching member types/roles]' + '-dt[match target attributes directly instead of matching member types/roles]' + '-rs[use regular expression matching for the source type/role]' + '-rt[use regular expression matching for the target type/role]' + '-rc[use regular expression matching for the object class]' + '-rd[use regular expression matching for the default type/role]' + '-rb[use regular expression matching for booleans]' + ':policy:_files' + ) + ;; + + sestatus) + args=( '-b[booleans]' '-v[contexts of files and processes listed in the /etc/sestatus.conf]' ) + ;; + + setenforce) + _alternative \ + 'enable-args:enable:(Enforcing 1)' \ + 'disable-args:disable:(Permissive 0)' + return + ;; + + setsebool) + args=( + '-P[make changes persistent by writing pending values to disk]' + "-N[don't reload policy from disk]" + '-V[print verbose error messages]' + ':boolean:_selinux_bools' + ': : _values value + {1,on}"[enable]" + {0,off}"[disable]"' + ) + ;; + + validatetrans) + args=( + ':source context:_selinux_contexts' + ':target context:_selinux_contexts' + ':class:_selinux_classes' + ':new context:_selinux_contexts' + ) + ;; +esac + +_arguments -s $args diff --git a/Completion/Linux/Command/_setpriv b/Completion/Linux/Command/_setpriv index 196f2f627..8b8d99785 100644 --- a/Completion/Linux/Command/_setpriv +++ b/Completion/Linux/Command/_setpriv @@ -93,10 +93,10 @@ _arguments -C -S -s \ '--reuid[set real and effective UNIX user id]:UNIX user:_users' \ '--securebits[set "process securebits"]: : _sequence __setpriv_prctl_securebits_set_elements' \ '--pdeathsig[keep, clear, or set parent death signal]: : __setpriv_death_signals' \ - '--selinux-label[request a selinux label]:SELinux labels: ' \ + '--selinux-label[request a selinux label]:SELinux label:_selinux_contexts' \ '--apparmor-profile[request an apparmor profile]:AppArmor profiles: ' \ '--reset-env[set environment as for a classic login shell]' \ - '*:::command:_normal' \ + '*:::command: _normal -p $service' \ && return 0 case $state in diff --git a/Completion/Linux/Command/_strace b/Completion/Linux/Command/_strace index b3b6f5096..37e14b6d6 100644 --- a/Completion/Linux/Command/_strace +++ b/Completion/Linux/Command/_strace @@ -11,11 +11,13 @@ _arguments -C -s \ \*{-E+,--env=}'[set or remove exported environment variable]:variable:->envars' \ '(:)*'{-p+,--attach=}'[attach to the process with specified process ID and begin tracing]:process ID:_pids' \ "${root}(-u --user)"{-u+,--user=}'[run as specified user]:user:_users' \ + '--argv0=[set argv0 for program]:name' \ '(-b --detach-on)'{-b+,--detach-on=}'[detach from process on specified syscall]:syscall:(execve)' \ '(--daemonize)-D[run tracer as detached grandchild, keeping traced process as direct child of calling process]' \ '(-D)--daemonize=-[specify how to run tracer process]::method:(grandchild pgroup session)' \ '(-f --follow-forks)'{-f,--follow-forks}'[trace child processes as they are created by currently traced processes]' \ '(-I --interruptible)'{-I+,--interruptible=}'[specify when strace can be interrupted by signals]:interruptible:((1\:"no signals are blocked" 2\:"fatal signals are blocked while decoding syscall (default)" 3\:"fatal signals are always blocked (default with -o)" 4\:"fatal signals and SIGTSTP are always blocked"))' \ + '--kill-on-exit[kill all tracees if strace is killed]' \ \*{-e+,--trace=}'[select events to trace or how to trace]:system call:->expressions' \ \*{-P+,--path=}'[trace only system calls accessing given path]:path:_files' \ '(-z -Z --successful-only --failed-only)'{-z,--successful-only}'[trace only system calls that return success]' \ @@ -45,11 +47,14 @@ _arguments -C -s \ '(-v --no-abbrev)'{-v,--no-abbrev}'[print unabbreviated versions of environment, stat, termios, etc. calls]' \ '(-xx --strings-in-hex)-x[print all non-ASCII strings in hexadecimal string format]' \ '(-x --strings-in-hex)-xx[print all strings in hexadecimal string format]' \ - '(-x -xx)--strings-in-hex=[specify strings to print in hexadecimal format]:string type:(all non-ascii)' \ + '(-x -xx)--strings-in-hex=[specify strings to print in hexadecimal format]:string type:(all non-ascii non-ascii-chars)' \ '(-X --const-print-style)'{-X+,--const-print-style=}'[set the format for printing of named constants and flags]:format:(raw abbrev verbose)' \ '(-c --summary-only -yy --decode-fds)-y[print paths associated with file descriptor arguments]' \ '(-c --summary-only -y --decode-fds)-yy[print protocol specific information associated with socket file descriptors]' \ - '(-c --summary-only -y -yy)--decode-fds=-[print information associated with file descriptors]::information [none]:_sequence compadd - none all path socket dev pidfd' \ + '(-c --summary-only -y -yy)--decode-fds=-[print information associated with file descriptors]::information [none]:_sequence compadd - none all path socket dev pidfd signalfd' \ + '(-c --summary-only -Y)--decode-pids=[print information associated with process IDs]:information [none]:_sequence compadd - none comm pidns' \ + '!(-c --summary-only -Y --decode-pids)--pidns-translation' \ + '(-c --summary-only --decode-pids)-Y[print command names for PIDs]' \ '(-c --summary-only -C --summary -i --instruction-pointer -k --stack-traces -r --relative-timestamps -ff -t -tt -ttt --absolute-timestamps -T --syscall-times -y -yy --decode-fds)'{-c,--summary-only}'[count time, calls, and errors for each system call and report a summary]' \ '(-c --summary-only -C --summary)'{-C,--summary}'[count time, calls, and errors for each system call and report a summary in addition to regular output]' \ '(-O --summary-syscall-overhead)'{-O+,--summary-syscall-overhead=}'[specify overhead for tracing system calls]:overhead (microseconds)' \ @@ -57,9 +62,11 @@ _arguments -C -s \ '(-U --summary-columns)'{-U+,--summary-columns=}'[show specific columns in the summary report]:column:_sequence compadd - time-percent total-time min-time max-time avg-time calls errors name' \ '(-w --summary-wall-clock)'{-w,--summary-wall-clock}'[summarise syscall latency]' \ '(-c --summary-only -C)-ff[write each process trace to <filename>.<pid> (when using -o <filename>]' \ + '--syscall-limit=[detach all tracees after tracing given number of syscalls]:limit' \ '(-d --debug)'{-d,--debug}'[show debug output of strace itself on standard error]' \ '(- 1 *)'{-h,--help}'[display help information]' \ '--seccomp-bpf[enable seccomp-bpf filtering]' \ + '--tips=-[show strace tips, tricks, and tweaks before exit]:tip [id\:random,format\:compact]' \ '(- 1 *)'{-V,--version}'[display version information]' \ '(-):command name: _command_names -e' \ '*::arguments:_normal' && ret=0 @@ -72,6 +79,7 @@ case $state in 'verbose[dereference structures for the specified set of system calls]:system call:_sequence _sys_calls -a -n' \ 'raw[print raw, undecoded arguments for the specified set of system calls]:system call:_sequence _sys_calls -a -n' \ 'signal[trace only the specified subset of signals]:signal:_sequence _signals -s -M "B\:!="' \ + 'trace-fds[trace operations on listed file descriptors]:file descriptor:_sequence _file_descriptors' \ 'read[perform a full hex and ASCII dump of all the data read from listed file descriptors]:file descriptor:_sequence _file_descriptors' \ 'write[perform a full hex and ASCII dump of all the data written to listed file descriptors]:file descriptor:_sequence _file_descriptors' \ 'fault[perform syscall fault injection]:system call:_sys_calls -a -n' \ @@ -79,7 +87,8 @@ case $state in 'status[trace system calls with given return status]:status:->status' \ 'quiet[suppress various information messages]:message [none]:_sequence compadd - none attach exit path-resolution personality thread-execve superseded' \ 'kvm[print the exit reason of kvm vcpu]: :(vcpu)' \ - 'decode-fds[print information associated with file descriptors]:information [none]:_sequence compadd - none all path socket dev pidfd' && ret=0 + 'decode-fds[print information associated with file descriptors]:information [none]:_sequence compadd - none all path socket dev pidfd signalfd' \ + 'decode-pids[print information associated with process IDs]:information [none]:_sequence compadd - none comm pidns' && ret=0 if [[ $state = status ]]; then _values -s , 'return status [all]' \ all successful failed \ diff --git a/Completion/Linux/Command/_sysstat b/Completion/Linux/Command/_sysstat index 5620da73d..59a2f5da9 100644 --- a/Completion/Linux/Command/_sysstat +++ b/Completion/Linux/Command/_sysstat @@ -56,6 +56,7 @@ _sadf() { '--dev=-[specify block devices for which statistics are to be displayed]:block device:_files -g "*(-%)"' \ '--fs=-[specify filesystems for which statistics are to be displayed]:file system:_dir_list -s ,' \ '--iface=-[specify network interfaces for which statistics are to be displayed]:network interface:_sequence _net_interfaces' \ + '--int=-[specify interrupts for which statistics are to be displayed]: : _values -s "," interrupt 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15' \ '-s[set starting time of report]:starting time (HH\:MM\:SS)"' \ '(-t -U)-T[display timestamp in local time]' \ '(-T -U)-t[display timestamp in file\''s original localtime]' \ @@ -99,9 +100,10 @@ _sar() { '(--human -p)-h[make output easier to read: implies --human and -p]' \ '(- 1 2)--help[display usage information]' \ '--human[print sizes in human readable format]' \ - '*-I[report statistics for interrupts]: : _values -s "," interrupt 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 SUM ALL XALL' \ + '-I[report statistics for interrupts]:interrupt:(SUM ALL)' \ '-i[select records as close as possible to interval]:interval' \ '--iface=-[specify network interfaces for which statistics are to be displayed]:network interface:_sequence _net_interfaces' \ + '--int=-[specify interrupts for which statistics are to be displayed]: : _values -s "," interrupt 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15' \ '-j[display persistent device names]:type:(ID LABEL PATH UUID)' \ '-m[report power management statistics]:keyword:_sequence compadd - CPU FAN FREQ IN TEMP USB ALL' \ '-n[report network statistics]:keyword:_sequence compadd - DEV EDEV NFS NFSD SOCK IP EIP ICMP EICMP TCP ETCP UDP SOCK6 IP6 EIP6 ICMP6 EICMP6 UDP6 FC SOFT ALL' \ @@ -130,7 +132,7 @@ _pidstat() { _arguments -s : \ '-C[filter tasks by string]:task filter' \ '-d[report I/O statistics]' \ - '-e[execute specified program and monitor it with pidstat]:*::command: _normal' \ + '-e[execute specified program and monitor it with pidstat]:*::command: _normal -p $service' \ '-H[display timestamp in seconds since the epoch]' \ '-h[display horizontally]' \ '-I[divide CPU usage by number of processors]' \ diff --git a/Completion/Linux/Command/_valgrind b/Completion/Linux/Command/_valgrind index b4bb3248e..5eaaea338 100644 --- a/Completion/Linux/Command/_valgrind +++ b/Completion/Linux/Command/_valgrind @@ -165,7 +165,7 @@ args_massif=( "--time-unit=-[specify time unit]:unit [i]:(( i\:instructions\ executed ms\:milliseconds - b\:heap\ bytes\ alloc\'d/dealloc\'d + B\:heap\ bytes\ alloc\'d/dealloc\'d ))" '--detailed-freq=-[every Nth snapshot should be detailed]:snapshot interval [10]' '--max-snapshots=-[specofy maximum number of snapshots recorded]:maximum [100]' @@ -216,7 +216,7 @@ _arguments -C ${(P)args} $cmd \ '--vgdb=-[activate gdbserver]:enable [yes]:(yes no full)' \ '--vgdb-error=-[invoke gdbserver after specified number of errors]:errors [999999999]:errors' \ '--vgdb-stop-at=-[invoke gdbserver for given events]:event:_sequence compadd - startup exit valgrindabexit all none' \ - '--track-fds=-[track open file descriptors]:enable:(yes no)' \ + '--track-fds=-[track open file descriptors]:enable [no]:(yes no all)' \ '--time-stamp=-[add timestamps to log messages]:enable:(yes no)' \ '--log-fd=-[log messages to specified file descriptor]:file descriptor:_file_descriptors' \ '--log-file=-[log messages to specified file with pid appended]:file:_files' \ diff --git a/Completion/Linux/Type/_selinux_contexts b/Completion/Linux/Type/_selinux_contexts index 4c2cf4288..bdad8e72b 100644 --- a/Completion/Linux/Type/_selinux_contexts +++ b/Completion/Linux/Type/_selinux_contexts @@ -1,14 +1,21 @@ #autoload -local -a parts suf +local -a parts users roles types + +zparseopts -E -D a:=types P:=users + +if ! compset -S ':*'; then + users+=( -qS : ) + roles+=( -qS : ) + [[ $(</sys/fs/selinux/mls) = 0 ]] 2>/dev/null || types+=( -qS : ) +fi parts=( users roles types ) while compset -P 1 '*:' && (( $+parts[1] )) ; do shift parts done if (( $+parts[1] )); then - compset -S ':*' || suf=( -S : ) - _selinux_$parts[1] $suf + _selinux_$parts[1] ${(P)parts[1]} else _message -e selinux-ranges 'selinux range' fi diff --git a/Completion/Linux/Type/_selinux_types b/Completion/Linux/Type/_selinux_types index ef31f45d2..69047c690 100644 --- a/Completion/Linux/Type/_selinux_types +++ b/Completion/Linux/Type/_selinux_types @@ -1,7 +1,19 @@ #autoload -local -a setypes expl +# Pass -a attribute to filter types, e.g.: +# -a domain - for process types +# -a file_type - for file types +# -a port_type - for network ports + +local -a setypes expl extra + +zparseopts -E -D -a extra a: + +if (( $#extra )); then + setypes=( ${${${(f)"$(_call_program selinux-types seinfo $extra --flat -x)"}#[[:blank:]]}:1} ) +else + setypes=( ${(f)"$(_call_program selinux-types seinfo --flat -t)"} ) +fi -setypes=( ${(f)"$(_call_program selinux-types seinfo --flat -t)"} ) _description selinux-types expl "selinux type" compadd "$@" "$expl[@]" -a setypes diff --git a/Completion/Redhat/Command/_dnf b/Completion/Redhat/Command/_dnf index ce111f38f..a5edf8564 100644 --- a/Completion/Redhat/Command/_dnf +++ b/Completion/Redhat/Command/_dnf @@ -245,7 +245,7 @@ _dnf() { '--security[include security relevant packages]' '*--setopt=[override config option]:repoid.option=value: ' '--skip-broken[resolve depsolve problems by skipping packages]' - '--show-duplicates[show duplicate packages in repos]' + '--showduplicates[show duplicate packages in repos]' '(-v --verbose)'{-v,--verbose}'[set verbose, show debug messages]' '(- *)--version[show dnf version]' '(-y --assumeyes --assumeno)'{-y,--assumeyes}'[answer yes for all questions]' diff --git a/Completion/Redhat/Command/_rpm b/Completion/Redhat/Command/_rpm index d00f88429..97f65cd6c 100644 --- a/Completion/Redhat/Command/_rpm +++ b/Completion/Redhat/Command/_rpm @@ -74,6 +74,7 @@ _rpm () { selectopts=( {-a,--all}'[query all packages]' {-f,--file}'[query packages that own specified files]' + '--path[query packages that own specified files, installed or not]' {-p,--package}'[query uninstalled packages]' {-g,--group}'[query packages in one of specified groups]' --pkgid --hdrid --tid --querybynumber @@ -165,9 +166,7 @@ _rpm () { {-F+,--freshen}'[freshen mode]:*:upgrade:->upgrade' {-e+,--erase}'[uninstall mode]:*:uninstall:->uninstall' '--reinstall[reinstall mode]:*:install:->install' - '--setperms[set file permissions]:*:package:->setattrs' - '--setugids[set file owner/group]:*:package:->setattrs' - '--setcaps[set capabilities of files in the given package]:*:package:->setattrs' + '!--set'{perms,ugids,caps}':*:package:->setattrs' '--restore[restore owner, group, permissions and capabilities of files in the given package]:*:package:->setattrs' ) ;; @@ -261,13 +260,15 @@ _rpm () { install) _arguments -s -C \!{-i,--install,-U,--upgrade,-F,--freshen} $tmp \ $commonopts $pathopts \ + '(--nodb)--justdb[update the database but not the filesystem]' \ + '(--justdb)--nodb[update the filesystem but not the database]' \ '--excludepath=:file to exclude:_files -/' \ '--relocate:relocate:->relocate' \ '--prefix=[relocate the package]:package prefix directory:_files -/' \ '(-h --hash)'{-h,--hash}'[print hash marks as package installs]' \ '(--replacepkgs --replacefiles --oldpackage)--force' \ '(--force)--'{replacefiles,replacepkgs} \ - --{aid,allfiles,badreloc,excludedocs,ignorearch,ignoreos,ignoresize,includedocs,justdb,percent,test} \ + --{aid,allfiles,badreloc,excludedocs,ignorearch,ignoreos,ignoresize,includedocs,percent,test} \ --no{deps,filedigest,contexts,caps,order,suggest,pre,post,preun,postun,trigger{s,in,un,postun}} \ '(--nopre --nopost --nopreun --nopostun)--noscripts' \ '*:pkg file:->package_file' @@ -275,7 +276,9 @@ _rpm () { uninstall) _arguments -s -C \!{-e,--erase} \ "${commonopts[@]}" "${pathopts[@]}" \ - --{allmatches,justdb,repackage,test} \ + '(--nodb)--justdb[update the database but not the filesystem]' \ + '(--justdb)--nodb[update the filesystem but not the database]' \ + --{allmatches,repackage,test} \ --no{deps,scripts,preun,postun,trigger{s,un,postun}} \ '*:package:->package' ;; diff --git a/Completion/Solaris/Command/_dumpadm b/Completion/Solaris/Command/_dumpadm index 44d681ae0..aa1c058bb 100644 --- a/Completion/Solaris/Command/_dumpadm +++ b/Completion/Solaris/Command/_dumpadm @@ -16,7 +16,7 @@ _arguments -s \ '-y[run savecore on reboot]' \ '-c[set dump content]:dump content:(($content))' \ '-d[set dump device]: : _alternative "tokens\:token\:(swap none)" "files\:block device\:_files -g \*\(-%b\)"' \ - '-m[set minfree size]:size' \ + '-m[set minfree size]: :_numbers size k m %' \ '-s[set the savecore directory]:directory:_files -/' \ '-r[alternate root directory]:directory:_files -/' \ '-z[enable saving core files in a compressed format]:compression:(on off)' diff --git a/Completion/Solaris/Command/_ipadm b/Completion/Solaris/Command/_ipadm index 34d1eacba..c59fc8108 100644 --- a/Completion/Solaris/Command/_ipadm +++ b/Completion/Solaris/Command/_ipadm @@ -136,7 +136,7 @@ _ipadm() { proto_icmp_properties=( "max_buf" "recv_buf" "send_buf" ) proto_all_properties=( $proto_ipv4_properties $proto_ipv6_properties $proto_tcp_properties $proto_udp_properties $proto_sctp_properties $proto_icmp_properties ) - proto_all_properties=( $^proto_all_properties:value:_ipadm_get_possible_values ) + proto_all_properties=( ${^proto_all_properties}:value:_ipadm_get_possible_values ) proto_propproperties=( "proto" "property" "perm" "current" "persistent" "default" "possible" ) diff --git a/Completion/Solaris/Command/_pkg5 b/Completion/Solaris/Command/_pkg5 index bcd4e3daf..5524e4eda 100644 --- a/Completion/Solaris/Command/_pkg5 +++ b/Completion/Solaris/Command/_pkg5 @@ -378,6 +378,7 @@ _pkg5() { '--non-sticky[Make this publisher non-sticky]' \ '--search-after[Set publisher search-order]:publisher:_pkg5_pubs' \ '--search-before[Set publisher search-order]:publisher:_pkg5_pubs' \ + '--search-first[set the specified publisher first in the search order]' \ '--approve-ca-cert[Add trusted CA certificate]:CA cert path:_path_files' \ '--revoke-ca-cert[Revoke CA certificate]:CA cert hash:(${${certs#/etc/openssl/certs/}%.0})' \ '--unset-ca-cert[Remove trusted CA certificate]:CA cert hash:' \ diff --git a/Completion/Unix/Command/_ansible b/Completion/Unix/Command/_ansible index 2d976b0a0..e0d9fb9b6 100644 --- a/Completion/Unix/Command/_ansible +++ b/Completion/Unix/Command/_ansible @@ -20,10 +20,11 @@ case $service in ;| ansible|ansible-console|ansible-playbook|ansible-pull) args+=( - '(-K --ask-become-pass)'{-K,--ask-become-pass}'[ask for privilege escalation password]' - '(-k --ask-pass)'{-k,--ask-pass}'[ask for connection password]' + '(-K --ask-become-pass --become-password-file)'{-K,--ask-become-pass}'[ask for privilege escalation password]' + '(-K --ask-become-pass)--become-password-file=[specify file containing become password]:file:_files' + '(-k --ask-pass --connection-password-file)'{-k,--ask-pass}'[ask for connection password]' + '(-k --ask-pass)--connection-password-file=[specify file containing connection password]:file:_files' '--list-hosts[output list of matching hosts]' - '(-l --limit)'{-l+,--limit=}'[further limit hosts to an additional pattern]:host subset:->hosts' '(-T --timeout)'{-T+,--timeout=}'[override the connection timeout]:timeout (seconds) [10]' '(-c --connection)'{-c+,--connection=}'[specify connection type]:connection type [smart]:->connect-types' '(-u --user)'{-u+,--user=}'[specify remote user for connection]:remote user:_users' @@ -42,19 +43,19 @@ case $service in '(-f --forks)'{-f+,--forks=}'[specify number of parallel processes to use]:processes [5]' '--become-method=[specify privilege escalation method to use]:method [sudo]:(sesu sudo su pbrun pfexec doas dzdo ksu runas pmrun enable machinectl)' '--become-user=[specify remote user for running operations]:user:_users' - "--syntax-check[perform a syntax check on the playbook, but don't execute it]" '!(-R --su-user -U --sudo-user)'{-R,-U,--su-user,--sudo-user}':user [root]:_users' ) ;| ansible|ansible-console|ansible-inventory|ansible-playbook|ansible-pull) args+=( --ask-vault-pass{,word}'[ask for vault password]' - '(-e --extra-vars)'{-e+,--extra-vars=}'[set additional variables]:key=value or YAML/JSON' - '--vault-id=[specify vault identity to use]:vault identity' + \*{-e+,--extra-vars=}'[set additional variables]:key=value, YAML/JSON or @file:->extra-vars' + '*--vault-id=[specify vault identity to use]:vault identity' --vault-pass{,word}-file='[specify vault password file]:vault password file:_files' \*{-i+,--inventory=}'[specify inventory host file or host list]: : _alternative "files\:inventory file\:_files" "hosts\:host\: _sequence _hosts"' '!(-i --inventory)--inventory-file=:inventory file:_files' + '(-l --limit)'{-l+,--limit=}'[further limit hosts to an additional pattern]:host subset:->hosts' ) ;| ansible|ansible-console|ansible-inventory) @@ -68,6 +69,11 @@ case $service in "--skip-tags[only run plays and tasks whose tags don't match]" ) ;| + ansible-playbook|ansible-console) + args+=( + '--step[one-step-at-a-time: confirm each task before running]' + ) + ;| ansible|ansible-console) args+=( '--task-timeout[set the task timeout limit]:timeout (seconds)' @@ -86,31 +92,26 @@ case $service in ) ;; ansible-config) - args+=( - '(-c --config)'{-c+,--config=}'[specify configuration file]:config file:_files' + args=( -A "-*" $args '1:action:(( list\:list\ all\ configuration dump\:show\ the\ current\ settings,\ merge\ specified\ configuration view\:display\ the\ current\ config\ file + init\:create\ initial\ configuration ))' - ) - [[ -n $words[(r)dump] ]] && args+=( '--only-changed[only show configuration that is changed from the default]' ) - ;; - ansible-console) - args+=( - '--step[one-step-at-a-time: confirm each task before running]' + '*::args:->config' ) ;; ansible-doc) args+=( - '!--metadata-dump' # "internal testing only" + '!--metadata-dump' '!--no-fail-on-errors' # "internal use only" '(-l --list -F --list_files -s --snippet --metadata-dump -e --entry-point)'{-j,--json}'[change output to json format]' '(-l --list -F --list_files -s --snippet --metadata-dump -e --entry-point)'{-l,--list}'[list available plugins]' '(-l --list -F --list_files -s --snippet --metadata-dump -e --entry-point)'{-F,--list_files}'[show plugin names and their source files without summaries]' - '(-l --list -F --list_files -s --snippet --metadata-dump -e --entry-point)'{-s,--snippet}'[show playbook snippet for specified plugins]' + '(-l --list -F --list_files -s --snippet --metadata-dump -e --entry-point)'{-s,--snippet}'[show playbook snippet for inventory, lookup and module plugins]' '(-l --list -F --list_files -s --snippet -e --entry-point)--metadata-dump[dump json metadata for all plugins]' '(-l --list -F --list_files -s --snippet --metadata-dump -e --entry-point)'{-e+,--entry-point=}'[select the entry point for roles]:entry point' - '(-t --type)'{-t+,--type=}'[choose plugin type]:plugin type [module]:(become cache callback cliconf connection httpapi inventory lookup netconf shell vars module strategy role keyword)' + '(-t --type)'{-t+,--type=}'[choose plugin type]:plugin type [module]:(become cache callback cliconf connection httpapi inventory lookup netconf shell vars module strategy test filter role keyword)' '(-r --roles-path)'{-r+,--roles-path=}'[specify directory containing roles]:directory:_directories' '*:plugin:->plugins' ) @@ -145,6 +146,7 @@ case $service in '--list-tags[list all available tags]' '--list-tasks[list all tasks that would be executed]' '--start-at-task=[start the playbook at specified task]:task' + "--syntax-check[perform a syntax check on the playbook, but don't execute it]" '--key-file=[specify file to use to authenticate the connection]:private key file:_files' '*:playbook:_files -g "(#i)*.y(|a)ml"' ) @@ -218,18 +220,13 @@ case $state in ;; connect-types) plug=connection - ;& - plugins) - plugvar=_ansible_${plug}_plugins - typeset -ga ${plug} - if zstyle -T ":completion:${curcontext}:plugins" verbose; then - (( ${(P)#plugvar} )) || set -A ${plugvar} \ - ${${(f)"$(_call_program plugins ansible-doc -t $plug -l)"}/ ##/:} - _describe -t plugins "${plug} plugin" $plugvar -M 'r:|.=* r:|=*' && ret=0 + state=plugins + ;; + extra-vars) + if compset -P '@'; then + _files -g "*.(json|yml|yaml|ini)(-.)" && ret=0 else - (( ${(P)#plugvar} )) || set -A ${plugvar} \ - ${${(f)"$(_call_program plugins ansible-doc -t $plug -F)"}%% *} - _wanted plugins expl "${plug} plugin" compadd -M 'r:|.=* r:|=*' -a $plugvar && ret=0 + _message 'key=value, YAML/JSON or @file' fi ;; tags) @@ -237,9 +234,45 @@ case $state in _sequence _wanted tags expl tag compadd - \ ${(s.,.)${(j.,.)${(M)${(f)"$(cat **/*.yml)"}:# #tags:*}#*: }} && ret=0 ;; + config) + ign='' + curcontext="${curcontext%:*}-${words[1]}:" + (( $#words > 3 )) && ign='!' + args=( + "${ign}(-)"{-h,--help}'[display usage information]' + \*{-v,--verbose}'[verbose mode]' + '(-c --config)'{-c+,--config=}'[specify configuration file]:config file:_files' + '(-t --type)'{-t+,--type=}'[filter down to a specific plugin type]:plugin type [base]:(all base become cache callback cliconf connection httpapi inventory lookup netconf shell vars)' + '*:plugin:->plugins' + ) + case $words[1] in + dump) + args+=( + '(--only-changed --changed-only)'{--only-changed,--changed-only}'[only show configuration that is changed from the default]' + '(-f --format)'{-f+,--format=}'[specify output format]:format:(json yaml display)' + ) + ;; + init) + args+=( + '--format=[specify output format for init]:format:(init env vars)' + '--disabled[prefix all entries with a comment character]' + ) + ;; + list) + args+=( + '(-f --format)'{-f+,--format=}'[specify output format]:format:(json yaml)' + ) + ;; + esac + _arguments -s -S : $args && ret=0 + plug=${(v)opt_args[(i)-(t|-type)]} + [[ $plug = base ]] && state= + ;; galaxy) ign='' gactions=( delete import info init install list remove search setup ) + args=( "${ign}(-)"{-h,--help}'[display usage information]' ) + (( $#words > 3 )) && ign='!' case ${(j.:.)line[1,3]} in (role|collection):*:*) subcmd="${line[1]}-${line[2]}" @@ -253,18 +286,16 @@ case $state in [^:]#) words=( role "$words[@]" ) (( CURRENT++ )) + args=() ;; esac curcontext="${curcontext%:*}-${subcmd}:" - (( $#words > 3 )) && ign='!' - args=( - "${ign}(-)"{-h,--help}'[display usage information]' - '1: :{ _wanted actions expl action compadd -a gactions }' - ) + args+=( '1: :{ _wanted actions expl action compadd -a gactions }' ) case $subcmd in *-*) args+=( '(-c --ignore-certs)'{-c,--ignore-certs}'[ignore SSL certificate validation errors]' + '--timeout=[specify time to wait for operations against the galaxy]:timeout (seconds) [60]' '(-s --server)'{-s+,--server=}'[specify API server destination]:server:_hosts' --{token,api-key}='[specify ansible galaxy API key]:api key' \*{-v,--verbose}'[verbose mode]' @@ -403,4 +434,19 @@ case $state in ;; esac +if [[ $state = plugins ]]; then + [[ -z $plug ]] && return ret + plugvar=_ansible_${plug}_plugins + typeset -ga ${plug} + if zstyle -T ":completion:${curcontext}:plugins" verbose; then + (( ${(P)#plugvar} )) || set -A ${plugvar} \ + ${${${(f)"$(_call_program plugins ansible-doc -t $plug -l)"}:# *}/(:|) ##/:} + _describe -t plugins "${plug} plugin" $plugvar -M 'r:|.=* r:|=*' && ret=0 + else + (( ${(P)#plugvar} )) || set -A ${plugvar} \ + ${${(f)"$(_call_program plugins ansible-doc -t $plug -F)"}%%(|:) *} + _wanted plugins expl "${plug} plugin" compadd -M 'r:|.=* r:|=*' -a $plugvar && ret=0 + fi +fi + return ret diff --git a/Completion/Unix/Command/_ant b/Completion/Unix/Command/_ant index 7401c7449..fd6112add 100644 --- a/Completion/Unix/Command/_ant +++ b/Completion/Unix/Command/_ant @@ -6,7 +6,8 @@ local curcontext="$curcontext" state line expl ret=1 typeset -A opt_args local buildfile classpath cp userjars importedfiles target='*:target:->target' targets tmp -find_targets() { +(( $+functions[_ant_targets] )) || +_ant_targets() { importedfiles=( $(sed -n "s/ *<import[^>]* file=[\"']\([^\"']*\)[\"'].*/\1/p" < $1) ) # Tweaked to omit targets beginning with "-" that can't # be invoked from the command line; see zsh-workers/24129. @@ -14,12 +15,12 @@ find_targets() { if (( $#importedfiles )) ; then ( cd $1:h for file in $importedfiles ; do - expanded=( $(echo $file | sed -n "s|\${ant.home}|$ANT_HOME|p") ) - if [[ ! "bla$expanded" = "bla" ]]; then + expanded=${file//\${ant.home}/$ANT_HOME} + if [[ "$expanded" != "$file" ]]; then file=$expanded fi if [[ -f $file ]]; then - find_targets $file + _ant_targets $file fi done ) fi @@ -79,8 +80,8 @@ case $state in compset -P '*:' compset -S ':*' _alternative \ - "classpath:$state:_path_files -qS: -g '*.(jar|zip)(-.)'" \ - "classpath:$state:_path_files -r': ' -/" && ret=0 + "classpath:${state}:_path_files -qS: -g '*.(jar|zip)(-.)'" \ + "classpath:${state}:_path_files -r': ' -/" && ret=0 ;; property) if compset -P 1 '*='; then @@ -122,20 +123,20 @@ case $state in read default_target junk fi # Output target again indicating its the default one. - print -n "'${default_target}:(Default target) ' " + print -rn -- "${(qq):-${default_target}:(Default target)} " ;; (Searching:*|Main:targets:|Subtargets:|BUILD:SUCCESSFUL|Total:time:*) ;; (*) # Return target and description - print -n "'$ln' " + print -rn -- "${(qq)ln} " ;; esac done )//$'\015'}" _describe 'target' tmp && ret=0 else - targets=( $(find_targets $buildfile) ) + targets=( $(_ant_targets $buildfile) ) _wanted targets expl target compadd -a targets && ret=0 fi else diff --git a/Completion/Unix/Command/_awk b/Completion/Unix/Command/_awk index e8f4a2530..b69cc5cf8 100644 --- a/Completion/Unix/Command/_awk +++ b/Completion/Unix/Command/_awk @@ -50,6 +50,7 @@ case $variant in {-D-,--debug=-}'[enable debugging]::debugger command file:_files' {-g,--gen-pot}'[scan awk program and generate .po file on stdout]' '*'{-i+,--include}'[load source library]:library file:->script' + {-I,--trace}'[print internal byte code names as they are executed]' '*'{-l+,--load}'[load dynamic extension]:extension:->extension' {-M,--bignum}'[select arbitrary-precision arithmetic on numbers]' {-o-,--pretty-print=-}'[pretty-print awk program]::output file:_files' diff --git a/Completion/Unix/Command/_cal b/Completion/Unix/Command/_cal index 82bb98b5f..b92e8153f 100644 --- a/Completion/Unix/Command/_cal +++ b/Completion/Unix/Command/_cal @@ -1,28 +1,131 @@ #compdef cal ncal -local args +local -a args +args=() case $service in cal) - args=( - '-3[three in a row]' - '-m[Monday as first day of the week]' - ) + # check util-linux's cal or bsdmainutils's cal + if $service --version 1>/dev/null 2>/dev/null ; then + args+=( + '(-1 --one)'{-1,--one}'[show only a single month]' + '(-3 --three)'{-3,--three}'[show three months spanning the date]' + '(-n --months)'{-n,--months=}"[show num months starting with date's month]:month" + '(-S --span)'{-S,--span}'[span the date when displaying multiple month]' + '(-s --sunday)'{-s,--sunday}'[Sunday as first day of week]' + '(-m --monday)'{-m,--monday}'[Monday as first day of week]' + '(-j --julian)'{-j,--julian}'[use day-of-year for all calendars]' + '--reform=[Gregorian reform date]:val:(1752 gregorian iso julian)' + '--iso[alias for --reform=iso]' + '(-y --year)'{-y,--year}'[show the whole year]' + '(-Y --twelve)'{-Y,--twelve}'[show the next twelve months]' + '(-w --week)'{-w,--week=-}'[show US or ISO-8601 week numbers]::num' + '(-v --vertical)'{-v,--vertical}'[show day vertically instead of line]' + '(-c --columns)'{-c,--columns=}'[amount of columns to use]:width' + '--color=-[colorize messages]:when:(auto always never)' + '(- *)'{-h,--help}'[display help]' + '(- *)'{-V,--version}'[display version]' + ) + else + case $OSTYPE in + (linux*|openbsd*|freebsd*|netbsd*|darwin*|dragonfly*) + args+=( + '-j[display Julian days]' + ) + ;| + (linux*|freebsd*|netbsd*|darwin*|dragonfly*) + args+=( + '-3[display the previous, current and next month surrounding today]' + '-A[months to add after]:months' + '-B[months to add before]:months' + ) + ;| + (freebsd*|netbsd*|darwin*|dragonfly*) + args+=( + '-h[turns off highlighting of today]' + ) + ;| + (netbsd*|openbsd*) + args+=( + '-y[display a calendar for the current year]' + ) + ;| + (linux*|freebsd*|darwin*|dragonfly*) + args+=( + '-m[display the specified month]:month' + '-y[display a calendar for the specified year]:year' + '-C[switch to cal mode]' + '-d[use yyyy-mm as the current date]:yyyy-mm' + ) + ;| + (freebsd*|darwin*|dragonfly*) + args+=( + '-N[switch to ncal mode]' + ) + ;| + (linux*) + args+=( + '-1[display only the current month]' + ) + ;| + (openbsd*) + args+=( + '-m[display weeks starting on Monday instead of Sunday]' + '-w[display week numbers in the month display]' + ) + ;| + (netbsd*) + args+=( + '-C[display context months before and after the specified month]:months' + '-d[specifies the day of the week on which the calendar should start]:day_of_week' + '-h[highlight the current day]' + '-R[selects an alternate Gregorian reform point from the default of September 3rd, 1752]:reform-sp' + '-r[display the month in which the Gregorian Reform adjustment was applied]' + ) + ;; + esac + fi ;; ncal) args=( - '-J[display Julian calendar]' - '-e[display date of western Easter]' - '-o[display date of orthodox Easter]' - '-p[assume as by ncal]' - '-s[country code]' - '-w[print number of the week below each column]' + '-h[turns off highlighting of today]' + '-J[display Julian Calendar]' + '-e[display date of Easter]' + '-j[display Julian days]' + '-o[display date of Orthodox Easter]' + '-m[display the specified month]:month' + '-p[print the country codes and switching days from Julian to Gregorian Calendar]' + '-s[assume the switch from Julian to Gregorian Calendar at the date associated with the country_code]:country_code' + '-w[print the number of the week below each week column]' + '-y[display a calendar for the specified year]:year' + '-3[display the previous, current and next month surrounding today]' + '-A[months to add after]:months' + '-B[months to add before]:months' + '-C[switch to cal mode]' + '-d[use yyyy-mm as the current date]:yyyy-mm' + '-H[use yyyy-mm-dd as the current date]:yyyy-mm-dd' + '-M[weeks start on Monday]' + '-S[weeks start on Sunday]' + '-W[first week of the year has at least number days]:number' + '-b[use oldstyle format for ncal output]' ) + + case $OSTYPE in + (linux*) + args+=( + '-b[use oldstyle format for ncal output]' + '-1[display only the current month]' + ) + ;; + (*) + args+=( + '-N[switch to ncal mode]' + ) + ;; + esac ;; esac _arguments "${args[@]}" \ - '-j[display Julian days]' \ - '-y[display a calendar for the current year]' \ '::month' \ ':year' diff --git a/Completion/Unix/Command/_cat b/Completion/Unix/Command/_cat index 74d7278b8..526c49e31 100644 --- a/Completion/Unix/Command/_cat +++ b/Completion/Unix/Command/_cat @@ -38,6 +38,9 @@ elif [[ "$OSTYPE" == (*bsd|dragonfly|darwin)* ]]; then '-B+[read with buffer of specified size]:size (bytes)' '-f[only attempt to display regular files]' ) + [[ $OSTYPE = darwin* ]] && args+=( + '-l[set an exclusive advisory lock on standard output]' + ) elif [[ $OSTYPE = solaris* ]]; then args=( -A "-*" diff --git a/Completion/Unix/Command/_chown b/Completion/Unix/Command/_chown index 9ebbf7bab..4362d6e75 100644 --- a/Completion/Unix/Command/_chown +++ b/Completion/Unix/Command/_chown @@ -43,7 +43,7 @@ case "$variant" in '(-H -L -P)-P[do not follow symlinks (default)]' ) ;| - dragonfly*|freebsd*) + dragonfly*|freebsd*|darwin*) args+=( "-x[don't traverse file systems]" ) @@ -63,6 +63,11 @@ case "$variant" in '-s[owner and/or group are Windows SID strings]' ) ;; + darwin*) + args+=( + '-n[interpret user and group as numeric, avoiding name lookups]' + ) + ;; esac (( $+words[(r)--reference*] )) || args+=( '(--reference)1: :->owner' ) diff --git a/Completion/Unix/Command/_chroot b/Completion/Unix/Command/_chroot index 516992694..a9c577bd7 100644 --- a/Completion/Unix/Command/_chroot +++ b/Completion/Unix/Command/_chroot @@ -33,7 +33,7 @@ case $variant in ;; esac -args+=( '1:new root directory:_directories' '*:::command:_normal' ) +args+=( '1:new root directory:_directories' '*::: : _normal -p $service' ) _arguments -s -S : $args && ret=0 diff --git a/Completion/Unix/Command/_cmp b/Completion/Unix/Command/_cmp index 6d7bfb1b7..20d309e32 100644 --- a/Completion/Unix/Command/_cmp +++ b/Completion/Unix/Command/_cmp @@ -1,23 +1,29 @@ #compdef cmp gcmp -local args variant +local args variant units _pick_variant -r variant gnu=GNU $OSTYPE --version case $variant in - gnu) + freebsd*|gnu) args=( '(-b --print-bytes)'{-b,--print-bytes}'[print differing bytes]' '(-i --ignore-initial)'{-i+,--ignore-initial}'[skip specified number of bytes]:bytes' '(-l --verbose -s --silent --quiet)'{-l,--verbose}'[output all differences]' '(-n --bytes)'{-n+,--bytes=}'[specify maximum bytes to compare]:bytes' '(-s --quiet --silent -l --verbose)'{-s,--quiet,--silent}'[return status alone signifies differences]' + ) + units=":_numbers -u bytes offset K M G T P E Z Y" + ;| + gnu) + args=( '(- *)'{-v,--version}'[display version information]' '(- *)--help[display help information]' ) + units+=" kB MB GB TB PB EB ZB YB" ;; netbsd*) args+=( "-c[don't use mmap]" ) ;| freebsd*|openbsd*) - args=( + args+=( "-h[don't follow symbolic links]" '-x[hexadecimal output and zero based offset index]' '-z[compare file sizes first]' @@ -31,4 +37,4 @@ case $variant in ;; esac -_arguments -s $args '1:file 1:_files' '2:file 2:_files' '::byte offset' '::byte offset' +_arguments -s $args '1:file 1:_files' '2:file 2:_files' "::byte offset$units" "::byte offset$units" diff --git a/Completion/Unix/Command/_column b/Completion/Unix/Command/_column index 94bdccf0a..687d7620f 100644 --- a/Completion/Unix/Command/_column +++ b/Completion/Unix/Command/_column @@ -22,7 +22,7 @@ case $variant in aopts=() args=( '(info json -c --output-width)'{-c+,--output-width=}'[format output to fit display of specified width]:width' - '(info)'{-L,--table-empty-lines}"[don't ignore empty lines]" + '(info)'{-L,--keep-empty-lines}"[don't ignore empty lines]" + fill '(info table text json -x --fillrows)'{-x,--fillrows}'[print across before down]' + table @@ -30,8 +30,20 @@ case $variant in '(info fill -o --output-separator)'{-o+,--output-separator=}'[specify column separator for table output]:separator [two spaces]' '(info fill -s --separator)'{-s+,--separator=}'[specify column delimiters in input data]:delimiters' '(info fill -O --table-order)'{-O+,--table-order=}'[specify order of output columns]: :->columns' - '(info fill -N --table-columns)'{-N+,--table-columns=}'[specify column names]:names' + '(info fill -N --table-columns)*'{-C+,--table-column=}'[specify column properties]: :_values -s, -S= property + "name[column name]\:name" + "trunc[truncate text in the columns when necessary]" + "right[right align text]" + "width[specify column width]\:width" + "strictwidth[strictly follow column width setting]" + "noextreme[allow length to be ignored]" + "wrap[wrap text when necessary]" + "hide[don'\''t print column]" + "json[define type for JSON output]\:type\:(string number boolean)"' + '(info fill -N --table-columns -C --table-column)'{-N+,--table-columns=}'[specify column names]:names' + '(info fill -l --table-columns-limit)'{-l+,--table-columns-limit=}'[specify maximum number of input columns]:columns' '(info fill -H --table-hide)'{-H+,--table-hide=}"[don't print specified columns]: :->columns" + '(info fill -m --table-maxout)'{-m,--table-maxout}'[fill all available space]' + text '(info fill json -d --table-noheadings)'{-d,--table-noheadings}"[don't print header]" '(info fill json -E --table-noextreme)'{-E+,--table-noextreme}"[specify columns where length can be ignored]: :->columns" diff --git a/Completion/Unix/Command/_cp b/Completion/Unix/Command/_cp index f7411055b..cb899cc28 100644 --- a/Completion/Unix/Command/_cp +++ b/Completion/Unix/Command/_cp @@ -32,7 +32,7 @@ if _pick_variant gnu=GNU unix --version; then '(-v --verbose)'{-v,--verbose}'[explain what is being done]' \ '(-x --one-file-system)'{-x,--one-file-system}'[stay on this file system]' \ '(--context)-Z[set destination SELinux security context]' \ - '(-Z)--context=-[set destination SELinux security context]:: :_selinux_contexts' \ + '(-Z)--context=-[set destination SELinux security context]:: :_selinux_contexts -a file_type' \ '(- *)--help' '(- *)--version' \ '*:file or directory:_files' else @@ -51,14 +51,16 @@ else '(aix|hpux|irix|solaris)*' '-r[copy directories recursively]' \ 'solaris2.<9->*' '-@[preserve extended attributes]' \ 'solaris2.<11->*' '-/[preserve extended attributes and extended system attributes]' \ + 'solaris2.<11->*' '-z[fast relink(3C) based copy]' \ '(darwin|dragonfly|freebsd)*' "(-f -i)-n[don't overwrite existing file]" \ 'netbsd*' "-N[don't copy file flags]" \ '(darwin|dragonfly|freebsd|netbsd|openbsd)*' '-a[archive mode, same as -RpP]' \ - '(dragonfly|freebsd)*' '-l[link files instead of copying]' \ + '(dragonfly|freebsd|darwin)*' '-l[link files instead of copying]' \ '(darwin|dragonfly|*bsd)*' '-v[show file names as they are copied]' \ 'darwin*' "-X[don't copy extended attributes or resource forks]" \ - '(dragonfly|freebsd)*' "-x[don't traverse file systems]" \ - 'freebsd<10->.*' '-s[make symbolic links instead of copies of non-directories]' + '(dragonfly|freebsd|darwin)*' "-x[don't traverse file systems]" \ + '(freebsd<10->.|darwin)*' '-s[make symbolic links instead of copies of non-directories]' \ + 'darwin*' '-c[copy files using clonefile(2)]' do [[ $OSTYPE = $~pattern ]] && args+=( $arg ) done diff --git a/Completion/Unix/Command/_cut b/Completion/Unix/Command/_cut index d3b1e2b10..778439cf1 100644 --- a/Completion/Unix/Command/_cut +++ b/Completion/Unix/Command/_cut @@ -1,6 +1,7 @@ #compdef cut gcut typeset -A _cut_args +local -a args case $LANG in (de_DE.UTF-8) @@ -45,7 +46,7 @@ if _pick_variant gnu="Free Soft" unix --version; then '*:file:_files' else case $OSTYPE in - freebsd*|dragonfly*) args+=( '(-d)-w[use whitespace as the delimiter]' ) ;; + freebsd*|dragonfly*|darwin*) args=( '(-d)-w[use whitespace as the delimiter]' ) ;; esac _arguments $args \ "-b[${_cut_args[bytes]}]:list" \ diff --git a/Completion/Unix/Command/_date b/Completion/Unix/Command/_date index 97c272830..f0053ec02 100644 --- a/Completion/Unix/Command/_date +++ b/Completion/Unix/Command/_date @@ -7,8 +7,8 @@ local -a opts args opts=( -s -w -C ) if _pick_variant gnu="Free Software Foundation" unix --version; then - local d='(-d --date -f --file -r --reference -s --set)' - local f='(-I --iso-8601 -R --rfc-email --rfc-3339)' + local d='(-d --date -f --file -r --reference -s --set --resolution)' + local f='(-I --iso-8601 -R --rfc-email --rfc-3339 --resolution)' args=( $d{-d+,--date=}'[output date specified by string]:time string' '--debug[annotate parsed date and warn about questionable usage]' @@ -16,9 +16,10 @@ if _pick_variant gnu="Free Software Foundation" unix --version; then $d{-r+,--reference=}'[output last modification time of specified file]:file:_files' $d{-s+,--set=}'[set time]:time string' $f{-I-,--iso-8601=-}'[display in ISO 8601 format]::precision:(date hours minutes seconds ns)' + '(-)--resolution[output the available resolution of timestamps]' $f{-R,--rfc-email}'[display in RFC5322 format]' $f'--rfc-3339=-[display in RFC 3339 format]:precision:(date seconds ns)' - '(-u --utc --universal)'{-u,--utc,--universal}'[display or set time in UTC]' + '(-u --utc --universal --resolution)'{-u,--utc,--universal}'[display or set time in UTC]' '(- :)--help[output help and exit]' '(- :)--version[output version info and exit]' ) @@ -43,12 +44,12 @@ else '-f+[use specified format for input]:parsing format:_date_formats:new date' ) ;| - dragonfly*|darwin*|netbsd*|openbsd*) + dragonfly*|netbsd*|openbsd*) args+=( '-r+[output date specified by reference time]:seconds since epoch' ) ;| - freebsd*) + freebsd*|darwin*) local -a alts alts=( 'seconds:sec:_guard "(0x[0-9a-fA-F]#|[0-9]#)" "seconds since epoch"' @@ -56,27 +57,25 @@ else ) args+=( '-r+[reference time: file modification or literal time]:reference: _alternative $alts' - '(-R)-I-[display in ISO 8601 format]::precision:(date hours minutes seconds)' ) ;| freebsd*|dragonfly*|darwin*) args+=( + '-R[display in RFC2822 format]' + '(-R)-I-[display in ISO 8601 format]::precision [date]:(date hours minutes seconds)' "*-v+[adjust and print (but don't set) date]:[+-]value[ymwdHMS]" ) ;| - freebsd<-12>.*|darwin*) + freebsd<-12>.*) args+=( '-d+:daylight saving time value' '-t+:minutes west of GMT' ) ;| - freebsd*|dragonfly*) - args+=( '-R[display in RFC2822 format]' ) - ;| openbsd*|netbsd*) args+=( '-a[gradually skew]' ) ;| - openbsd*) - args+=( '-z[specify timezone for output]:time zone:_time_zone') + freebsd<14->.*|openbsd*) + args+=( '-z+[specify timezone for output]:time zone:_time_zone') ;| netbsd*) args+=( '-d[output date specified by string]:time string:' ) diff --git a/Completion/Unix/Command/_dbus b/Completion/Unix/Command/_dbus index 37b5458d7..d2a93152c 100644 --- a/Completion/Unix/Command/_dbus +++ b/Completion/Unix/Command/_dbus @@ -8,11 +8,13 @@ case $service in dbus-send) _arguments -A "--*" -C \ '(--session)--system' '(--system)--session' \ - '--address=-:bus address:->addresses' \ + '--bus=-:bus address:->addresses' \ + '--peer=-:bus address:->addresses' \ '--dest=-:connection:->connections' \ '--print-reply=-::format:(literal)' \ '--reply-timeout=-:timeout (ms)' \ - '--type=-:type:(method_call signal)' \ + '--sender=-:name' \ + '--type=-:type [signal]:(method_call signal)' \ '(* -)--help' \ ':object path:->objectpaths' \ ':message name:->methods' \ diff --git a/Completion/Unix/Command/_dd b/Completion/Unix/Command/_dd index 10682bc8e..c55efb68c 100644 --- a/Completion/Unix/Command/_dd +++ b/Completion/Unix/Command/_dd @@ -74,7 +74,7 @@ case $variant in vals+=( 'status[specify level of information to print to stderr]:level:(none noxfer progress)' ) - flags+=( fullblock noatime nocache count_bytes skip_bytes seek_bytes ) + flags+=( fullblock noatime nocache ) conv+=( excl nocreat fdatasync fsync ) units=( c:1 w:2 b:512 kB:1000 K:1024 MB:1000^2 M:1024\^2 GB G TB T PB P EB E ZB Z YB Y ) ;; diff --git a/Completion/Unix/Command/_dig b/Completion/Unix/Command/_dig index 3081e2cfd..c09bebbe5 100644 --- a/Completion/Unix/Command/_dig +++ b/Completion/Unix/Command/_dig @@ -6,8 +6,9 @@ local -a alts args '*+'{no,}'tcp[use TCP instead of UDP for queries]' '*+'{no,}'ignore[ignore truncation in UDP responses]' '*+domain=[set search list to single domain]:domain:_hosts' - '*+dscp=[set DSCP code point for query]:code point (0..63)' + '!*+dscp=:code point (0..63)' '*+'{no,}'search[use search list defined in resolv.conf]' + '!*+'{no,}defname '*+'{no,}'showsearch[show intermediate results in domain search]' '*+split[split hex/base64 fields into chunks]:width (characters) [56]' '*+'{no,}'aaonly[set aa flag in the query]' @@ -18,6 +19,7 @@ local -a alts args '*+'{no,}'class[display the CLASS whening printing the record]' '*+'{no,}'cookie[add a COOKIE option to the request]' '*+'{no,}'crypto[display cryptographic fields in DNSSEC records]' + '*+'{no,}'dns64prefix[get the DNS64 prefixes from ipv4only.arpa]' '*+edns=[specify EDNS version for query]:version (0-255)' '*+noedns[clear EDNS version to be sent]' '*+ednsflags=[set EDNS flags bits]:flags' @@ -27,11 +29,15 @@ local -a alts args '*+'{no,}'expandaaaa[expand AAAA records]' '*+'{no,}'expire[send an EDNS Expire option]' '*+'{no,}'header-only[send query without a question section]' + '*+'{no,}'https=[DNS-over-HTTPS POST mode]::endpoint [/dns-query]' + '!*+'{no,}'https-post=::endpoint [/dns-query]' + '*+'{no,}'https-get=[DNS-over-HTTPS GET mode]::endpoint [/dns-query]' + '*+'{no,}'http-plain=[DNS-over-HTTP POST mode]::endpoint [/dns-query]' + '*+'{no,}'http-plain-get=[DNS-over-HTTP GET mode]::endpoint [/dns-query]' '*+'{no,}'idnin[set processing of IDN domain names on input]' '*+'{no,}'idnout[set conversion of IDN puny code on output]' '*+'{no,}'keepalive[request EDNS TCP keepalive]' '*+'{no,}'keepopen[keep TCP socket open between queries]' - '*+'{no,}'mapped[allow mapped IPv4 over IPv6 to be used]' '*+'{no,}'recurse[set the RD (recursion desired) bit in the query]' '*+'{no,}'nssearch[search all authoritative nameservers]' '*+opcode[set DNS message opcode of the request]:opcode [QUERY]:(QUERY IQUERY STATUS NOTIFY UPDATE)' @@ -39,10 +45,12 @@ local -a alts args '*+'{no,}'trace[trace delegation down from root]' '*+'{no,}'cmd[print initial comment in output]' '*+'{no,}'short[print terse output]' + '*+'{no,}'showbadcookie[show BADCOOKIE message]' '*+'{no,}'identify[print IP and port of responder]' '*+'{no,}'comments[print comment lines in output]' '*+'{no,}'stats[print statistics]' '*+padding[set padding block size]:size [0]' + '*+qid=[specify query ID]:query ID' '*+'{no,}'qr[print query as it was sent]' '*+'{no,}'question[print question section of a query]' '*+'{no,}'raflag[set RA flag in the query]' @@ -52,6 +60,11 @@ local -a alts args '*+'{no,}'subnet[send EDNS client subnet option]:addr/prefix-length' '*+'{no,}'tcflag[set TC flag in the query]' '*+timeout=[set query timeout]:timeout (seconds) [5]' + '*+'{no,}'tls[DNS-over-TLS mode]' + '*+'{no,}"tls-ca=[enable remote server's TLS certificate validation]:file:_files" + '*+'{no,}"tls-hostname=[explicitly set the expected TLS hostname]:hostname" + '*+'{no,}'tls-certfile=[load client TLS certificate chain from file]:file:_files' + '*+'{no,}'tls-keyfile=[load client TLS private key from file]:file:_files' '*+tries=[specify number of UDP query attempts]:tries' '*+retry=[specify number of UDP query retries]:retries' '*+'{no,}'rrcomments[set display of per-record comments]' @@ -65,7 +78,6 @@ local -a alts args '*+'{no,}'nsid[include EDNS name server ID request in query]' '*+'{no,}'ttlid[display the TTL whening printing the record]' '*+'{no,}'ttlunits[display the TTL in human-readable units]' - '*+'{no,}'unexpected[print replies from unexpected sources]' '*+'{no,}'unknownformat[print RDATA in RFC 3597 "unknown" format]' '*+'{no,}'yaml[present the results as YAML]' '*+'{no,}'zflag[set Z flag in query]' diff --git a/Completion/Unix/Command/_dmidecode b/Completion/Unix/Command/_dmidecode index 047b74f6d..e2c511313 100644 --- a/Completion/Unix/Command/_dmidecode +++ b/Completion/Unix/Command/_dmidecode @@ -4,6 +4,7 @@ _arguments -s \ '(-d --dev-mem --from-dump)'{-d+,--dev-mem=}'[read memory from specified file]:memory device [/dev/mem]:_files' \ '(-)'{-h,--help}'[display usage information]' \ '(-q --quiet -u --dump)'{-q,--quiet}'[be less verbose]' \ + '--no-quirks[decode everything without quirks]' \ '(-t --type -H --handle -u --dump --dump-bin -s --string)'{-s+,--string=}'[only display value of specified DMI string]:DMI string:(bios-vendor bios-version bios-release-date system-manufacturer system-product-name system-version system-serial-number system-uuid baseboard-manufacturer baseboard-product-name baseboard-version baseboard-serial-number baseboard-asset-tag chassis-manufacturer chassis-type chassis-version chassis-serial-number chassis-asset-tag processor-family processor-manufacturer processor-version processor-frequency)' \ '(-s --string -H --handle --dump-bin)*'{-t+,--type=}'[only display entries of specified type]:entry type:(bios system baseboard chassis processor memory cache connector slot)' \ '(-s --string -t --type -H --handle --dump-bin)'{-H,--handle=}'[only display the entry of specified handle]:handle' \ diff --git a/Completion/Unix/Command/_du b/Completion/Unix/Command/_du index 711f43471..ccb5bdd94 100644 --- a/Completion/Unix/Command/_du +++ b/Completion/Unix/Command/_du @@ -55,7 +55,7 @@ else ) local xdev='[skip directories on different filesystems]' for pattern arg in \ - 'freebsd*' '-A[apparent size instead of usage]' \ + '(freebsd|darwin)*' '-A[apparent size instead of usage]' \ '(darwin*|*bsd*|dragonfly*|solaris2.<10->)' '(-H -L -P)-H[follow symlinks on the command line]' \ '(darwin|*bsd|dragonfly)*' '(-H -L -P)-P[do not follow symlinks (default)]' \ '(darwin|dragonfly|freebsd)*' '*-I+[ignore files/directories matching specified mask]:mask' \ @@ -64,12 +64,12 @@ else 'netbsd*' '-i[output inode usage instead of blocks]' \ '(darwin*|freebsd*|netbsd*|solaris2.<11->)' '(-h -k -g -B)-m[use block size of 1M-byte]' \ '(darwin|freebsd<8->.|netbsd)*' '(-h -k -m -B)-g[use block size of 1G-byte]' \ - 'freebsd*' '(-h -k -m -g)-B+[block size]:block size (bytes)' \ + '(freebsd|darwin)*' '(-h -k -m -g)-B+[block size]:block size (bytes)' \ '(darwin|*bsd|dragonfly)*' '-c[display grand total]' \ - 'freebsd*' '-l[count sizes many times if hard linked]' \ + '(freebsd|darwin)*' '-l[count sizes many times if hard linked]' \ '(freebsd|netbsd)*' '-n[ignore files and directories with nodump flag set]' \ 'solaris*' "(-a)-o[don't add child directories' usage to parent's total]" \ - 'freebsd<8->.*' '-t+[report only entries for which size exceeds threshold]:threshold' \ + '(freebsd|darwin)*' '-t+[report only entries for which size exceeds threshold]:threshold' \ 'solaris*' "-d$xdev" \ '(darwin|*bsd|dragonfly|solaris)*' "-x$xdev" do diff --git a/Completion/Unix/Command/_elfdump b/Completion/Unix/Command/_elfdump index 065f4b97f..b3cc77695 100644 --- a/Completion/Unix/Command/_elfdump +++ b/Completion/Unix/Command/_elfdump @@ -34,10 +34,15 @@ case $OSTYPE in '-l[show long section names without truncation]' '-O[specify osabi to apply]:osabi' '-P[use alternative section header]' - "*:elf file:_object_files" ) ;; - freebsd*) args+=( '-a[dump all information]' ) ;; + freebsd*) + args+=( + '-a[dump all information]' + '(-)-E[return success if file is an ELF file and failure if not]' + ) + ;; esac -_arguments -s $args +_arguments -s $args \ + "*:elf file:_object_files" diff --git a/Completion/Unix/Command/_enscript b/Completion/Unix/Command/_enscript index 3e09da5a4..4658ae4bc 100644 --- a/Completion/Unix/Command/_enscript +++ b/Completion/Unix/Command/_enscript @@ -128,7 +128,7 @@ case "$state" in local suf='{' compquote suf if [[ ${PREFIX} = *[%$]D${suf}[^}]# ]]; then - _strftime + _date_formats elif [[ ${(Q)PREFIX} = *\$\([^\)]# ]]; then compset -P '*\(' _parameters -g '*export*' -S '\)' diff --git a/Completion/Unix/Command/_env b/Completion/Unix/Command/_env index a5dd49d37..8cf0ad467 100644 --- a/Completion/Unix/Command/_env +++ b/Completion/Unix/Command/_env @@ -9,6 +9,7 @@ case $variant in (( $#words > 2 )) && ign='!' args=( '(-)'{-i,--ignore-environment}'[start with empty environment]' + '(* -0 --null)'{-0,--null}'[end each output line with NUL, not newline]' '(--ignore-environment -i --help --version)*'{-u+,--unset=}'[remove variable from the environment]:env var to remove:_parameters -g "*export*"' '(-C --chdir)'{-C+,--chdir=}'[change working directory]:directory:_directories' '(-S --split-string)'{-S+,--split-string=}'[perform word splitting]:string to split' @@ -23,11 +24,13 @@ case $variant in ;; freebsd*) args=( - '-0[use NUL, not newline after each variable in output]' '-L[add variables from system login.conf(5)]: :->user-class' '-U[add variables from user and system login.conf(5)]: :->user-class' ) ;| + freebsd*|darwin*) + args=( '-0[use NUL, not newline after each variable in output]' ) + ;| freebsd*|darwin*|dragonfly*) args+=( '(-i)*-u+[remove variable from the environment]:env var to remove:_parameters -g "*export*"' @@ -58,7 +61,7 @@ if [[ -n $state ]]; then shift words (( CURRENT-- )) done - _normal && ret=0 + _normal -p env && ret=0 ;; user-class) if compset -P 1 '*/'; then diff --git a/Completion/Unix/Command/_ffmpeg b/Completion/Unix/Command/_ffmpeg index 1329939cd..e5afdac4f 100644 --- a/Completion/Unix/Command/_ffmpeg +++ b/Completion/Unix/Command/_ffmpeg @@ -125,7 +125,7 @@ local -a _ffmpeg_argspecs lastopt_description=${lastopt_description//:/\\:} if [[ $example == filename ]]; then lastopt_takesargs=0 - lastopt+=":$lastopt_description:_files" + lastopt+=":${lastopt_description}:_files" elif [[ $lastopt == -[asv]pre ]]; then lastopt_takesargs=0 lastopt="*$lastopt" diff --git a/Completion/Unix/Command/_find b/Completion/Unix/Command/_find index 560b77f7e..4f1c338ee 100644 --- a/Completion/Unix/Command/_find +++ b/Completion/Unix/Command/_find @@ -115,14 +115,14 @@ case $variant in '*-readable' '*-writable' '*-xtype:file type:((b\:block\ special\ file c\:character\ special\ file d\:directory p\:named\ pipe f\:normal\ file l\:symbolic\ link s\:socket))' - '-files0-from[start recursing from targets in given file]:NUL-separated targets file:_files' + '(*)-files0-from[start recursing from targets in given file]:NUL-separated targets file:_files' '*-fls:output file:_files' '*-fprint:output file:_files' '*-fprint0:output file:_files' '*-fprintf:output file:_files:output format' '*-printf:output format' ) - [[ $OSTYPE = linux-gnu ]] && args+=( '*-context:SELinux context (glob pattern):_selinux_contexts' ) + [[ $OSTYPE = linux-gnu ]] && args+=( '*-context:SELinux context (glob pattern):_selinux_contexts -a file_type' ) ;; esac diff --git a/Completion/Unix/Command/_flac b/Completion/Unix/Command/_flac index 82b6f0160..1773061ee 100644 --- a/Completion/Unix/Command/_flac +++ b/Completion/Unix/Command/_flac @@ -85,6 +85,7 @@ case $service in '(-p --qlp-coeff-precision-search -q --qlp-coeff-precision)'{-p,--qlp-coeff-precision-search}'[exhaustively search LP coeff quantization]' \ '(-p --qlp-coeff-precision-search -q --qlp-coeff-precision)'{-q,--qlp-coeff-precision=}'[specify precision]:precision (bits)' \ '(-r --rice-partition-order)'{-r,--rice-partition-order=}'[set min/max residual partition order]:order' \ + "--limit-min-bitrate[don't allow frames consisting of only constant subframes]" \ '--endian=:byte order:(big little)' \ '--channels=:channels' \ '--bps=:bits per sample' \ diff --git a/Completion/Unix/Command/_gcc b/Completion/Unix/Command/_gcc index ac0e8fda3..8690c5599 100644 --- a/Completion/Unix/Command/_gcc +++ b/Completion/Unix/Command/_gcc @@ -1318,11 +1318,13 @@ fi local -a sanitizers sanitizers=( - address alignment bool bounds enum float-cast-overflow float-divide-by-zero - integer-divide-by-zero memory nonnull-attribute null nullability-arg - nullability-assign nullability-return object-size pointer-overflow return - unsigned-integer-overflow returns-nonnull-attribute shift signed-integer-overflow - unreachable vla-bound vptr + address alignment bool bounds bounds-strict enum builtin float-cast-overflow + float-divide-by-zero hwaddress integer-divide-by-zero kernel-address + kernel-hwaddress leak memory nonnull-attribute null nullability-arg nullability-assign + nullability-return object-size pointer-compare pointer-overflow pointer-subtract return + returns-nonnull-attribute shadow-call-stack shift shift-base shift-exponent + signed-integer-overflow thread undefined unsigned-integer-overflow unreachable + vla-bound vptr ) local -a languages @@ -1892,7 +1894,7 @@ args+=( '-freschedule-modulo-scheduled-loops[enable/disable the traditional scheduling in loops that already passed modulo scheduling]' '-frounding-math[disable optimizations that assume default FP rounding behavior]' '-frtti[generate run time type descriptor information]' - "-fsanitize=-[enable AddressSanitizer, a memory error detector]:style:($sanitizers)" + "*-fsanitize=-[enable AddressSanitizer, a memory error detector]:style:->sanitize" '-fsched2-use-superblocks[if scheduling post reload, do superblock scheduling]' '-fsched-critical-path-heuristic[enable the critical path heuristic in the scheduler]' '-fsched-dep-count-heuristic[enable the dependent count heuristic in the scheduler]' @@ -2282,6 +2284,9 @@ archgeneric) arch+=(generic) _wanted cputypes expl "CPU type" compadd -a arch && ret=0 ;; +sanitize) + _values -s , 'sanitizer' $sanitizers + ;; esac return ret diff --git a/Completion/Unix/Command/_gcore b/Completion/Unix/Command/_gcore index a31a81267..ef3afd919 100644 --- a/Completion/Unix/Command/_gcore +++ b/Completion/Unix/Command/_gcore @@ -46,6 +46,7 @@ case $OSTYPE in _arguments -s \ '-c+[write core file to specified file]:file:_files' \ '-f[dump all available segments]' \ + '-k[use the ptrace(2) PT_COREDUMP kernel facility to write the core dump]' \ '::executable:' \ ':pid:_pids' ;; diff --git a/Completion/Unix/Command/_gem b/Completion/Unix/Command/_gem index 7d81619bb..c5a64cdf1 100644 --- a/Completion/Unix/Command/_gem +++ b/Completion/Unix/Command/_gem @@ -20,6 +20,7 @@ lropts=( $proxy _arguments -C -s \ '(* -)'{-h,--help}'[display usage information]' \ '(* -)'{-v,--version}'[display version information]' \ + '-C[change directory first]:directory:_directories' \ '*::command:->command' && ret=0 if [[ $state = command ]]; then @@ -27,7 +28,7 @@ if [[ $state = command ]]; then cmd=subcommands else cmds=( - build cert check cleanup contents dependency environment fetch + build cert check cleanup contents dependency environment exec fetch generate_index help install info list lock mirror open outdated owner pristine push query rdoc search server signin signout sources specification stale uninstall unpack update which yank @@ -87,13 +88,13 @@ if [[ $state = command ]]; then '!(-d --details)--no-details' ) ;| - check|contents|dependency|fetch|install|list|open|pristine|query|rdoc|search|specification|uninstall|unpack|yank) + check|contents|dependency|exec|fetch|install|list|open|pristine|query|rdoc|search|specification|uninstall|unpack|yank) args+=( '(-v --version)'{-v,--version=}'[specify version of gem]:version' ) ;| - dependency|fetch|install|outdated|specification|uninstall|update|yank) + build|dependency|fetch|install|outdated|specification|uninstall|update|yank) args+=( '--platform=[specify the platform of gem]:platform' ) ;| - dependency|fetch|install|list|query|search|specification|update) + dependency|exec|fetch|install|list|query|search|specification|update) args+=( '--prerelease[include prerelease versions of a gem]' '!(--prerelease)--no-prerelease' ) ;| install|unpack|update) @@ -125,13 +126,13 @@ if [[ $state = command ]]; then ;| (un|)install|pristine|update) args+=( + '(-i --install-dir)'{-i,--install-dir=}'[specify gem repository directory to get installed gems]:directory:_directories' '(-n --bindir)'{-n,--bindir=}'[specify directory where binary files are located]:directory:_directories' ) ;| (un|)install|update) args+=( '--ignore-dependencies[ignore dependency requirements]' - '(-i --install-dir)'{-i,--install-dir=}'[specify gem repository directory to get installed gems]:directory:_directories' ) ;| owner|push) @@ -166,6 +167,7 @@ if [[ $state = command ]]; then '(-b --build)'{-b,--build=}'[build private key and self-signed certificate for specified email address]:email address:_email_addresses -c' '(-C --certificate)'{-C,--certificate=}'[specify signing certificate for --sign]:certificate' '(-K --private-key)'{-K,--private-key=}'[specify key for --sign or --build]:key' + '(-A --key-algorithm)'{-A,--key-algorithm=}'[select which key algorithm to use for --build]:algorithm' '(-s --sign)'{-s,--sign=}'[sign specified certificate with the key from -K and the certificate from -C]:certificate' '(-d --days)'{-d,--days=}'[specify days before certificate expires]:days' '(-R --re-sign)'{-R,--re-sign}'[re-sign the certificate]' @@ -181,7 +183,7 @@ if [[ $state = command ]]; then ;; cleanup) args+=( - '(-n -d --dryrun)'{-n,-d,--dryrun}"[don't uninstall gems]" + '(-n -d --dry-run)'{-n,-d,--dry-run}"[don't uninstall gems]" "--user-install[cleanup in user's home directory instead of GEM_HOME]" ) ;; @@ -201,11 +203,20 @@ if [[ $state = command ]]; then ) ;; environment) - args+=( '1:information:(gemdir gempath version remotesources platform)' ) + args+=( '1:information:(gemdir gempath home path user_gemhome version remotesources platform)' ) + ;; + exec) + args+=( + '--conservative[prefer most recent installed version to the overall latest]' + '1:gem:->gems-remote' + '*: :_default' + ) ;; fetch) def=( both \! local \! remote \! ) - args+=( ${(e)lropts} ) + args+=( ${(e)lropts} + "--no-suggestions[don't suggest alternates when gems are not found]" + ) ;; generate_index) args+=( @@ -232,13 +243,15 @@ if [[ $state = command ]]; then args+=( '(*)*--skip=[with --all, skip specified gem]:installed gem:->gems-local' "--no-extensions[don't restore gems with extensions in addition to regular gems]" + '--only-missing-extensions[only restore gems with missing extensions]' '--only-executables[only restore executables]' + '--only-plugins[only restore plugins]' ) ;; push) args+=( '1:gem file:_files -g "*.gem(-.)"' ) ;; - query) + query) # deprecated args+=( '(-n --name-matches)'{-n,--name-matches=}'[specify regex to match against gem names]:gem name (regex):->gems-local' ) @@ -266,6 +279,7 @@ if [[ $state = command ]]; then '(-r --remove)'{-r,--remove=}'[remove source]:source URI:_urls' '(-c --clear-all)'{-c,--clear-all}'[remove all sources (clear the cache)]' '(-u --update)'{-u,--update}'[update source cache]' + '(-f --force)'{-f,--force}"[don't show any confirmation prompts]" ) ;; specification) @@ -319,7 +333,7 @@ if [[ $state = command ]]; then '--norc[avoid loading any .gemrc file]' && ret=0 if [[ $state == gems* ]]; then - filter=( ${${opt_args[(I)-([lbr]|-local|-remote|-both)]}:-${${(M)state:#*-*}/gems-/--}} ) + filter=( ${${opt_args[(I)-([lbr]|-conservative|-local|-remote|-both)]/conservative/local}:-${${(M)state:#*-*}/gems-/--}} ) _description gems expl gem compadd "$expl[@]" ${${(f)"$(_call_program gems gem list $filter -q --no-versions)"}%% *} && ret=0 fi diff --git a/Completion/Unix/Command/_getent b/Completion/Unix/Command/_getent index b96852db3..5604e526e 100644 --- a/Completion/Unix/Command/_getent +++ b/Completion/Unix/Command/_getent @@ -8,6 +8,7 @@ typeset -A opt_args if _pick_variant -r is_gnu gnu='(Free Soft|GNU|GLIBC|Gentoo)' unix --version; then args+=( '(- 1 *)'{-\?,--help}'[display help information]' + '(-A --no-addrconfig)'{-A,--no-addrconfig}"[don't filter out unsupported IPv4/IPv6 addresses (with ahosts*)]" '(- 1 *)--usage[display a short usage message]' '(- 1 *)'{-V,--version}'[display version information]' '*'{-s+,--service=}'[specify service configuration to use]: :->services' @@ -23,7 +24,7 @@ case $state in services) # @todo GNU getent supports both `-s svc` and `-s db:svc`; we only complete # the former here - services=( {,/usr}/lib/{,*-linux-gnu/}libnss_*(N-.:fr:t:s/libnss_//) ) + services=( {,/usr}/lib{,64}/{,*-linux-gnu/}libnss_*(N-.:fr:t:s/libnss_//) ) _wanted services expl 'service or database:service' \ compadd ${(u)services%-*} \ && ret=0 diff --git a/Completion/Unix/Command/_git b/Completion/Unix/Command/_git index cecb80ac3..7370aaead 100644 --- a/Completion/Unix/Command/_git +++ b/Completion/Unix/Command/_git @@ -76,17 +76,21 @@ _git-add () { case $state in (file) - declare -a ignored_files_alternatives + declare -a file_alternatives + if [[ -z ${opt_args[(I)-u|--update]} ]]; then + file_alternatives=( + 'other-files::__git_ignore_line_inside_arguments __git_other_files' + ) + fi if [[ -n ${opt_args[(I)-f|--force]} ]]; then - ignored_files_alternatives=( + file_alternatives+=( 'ignored-modified-files:ignored modified file:__git_ignore_line_inside_arguments __git_modified_files --ignored' 'ignored-other-files:ignored other file:__git_ignore_line_inside_arguments __git_other_files --ignored') fi _alternative \ 'modified-files::__git_ignore_line_inside_arguments __git_modified_files' \ - 'other-files::__git_ignore_line_inside_arguments __git_other_files' \ - $ignored_files_alternatives && ret=0 + $file_alternatives && ret=0 ;; esac @@ -119,7 +123,10 @@ _git-am () { $apply_options \ '--quit[abort the patching operation but keep HEAD where it is]' \ '--show-current-patch=-[show the message being applied]::show [raw]:(diff raw)' \ + '(--empty)--allow-empty[record the empty patch as an empty commit]' \ + '(--allow-empty)--empty=[select hanndling of empty patches]:handling:(stop drop keep)' \ '(-i --interactive)'{-i,--interactive}'[apply patches interactively]' \ + '(-n --no-verify)'{-n,--no-verify}'[bypass pre-applypatch and applypatch-msg hooks]' \ '--committer-date-is-author-date[use author date as committer date]' \ '--ignore-date[use committer date as author date]' \ '--skip[skip the current patch]' \ @@ -160,8 +167,10 @@ _git-archive () { '--format=-[format of the resulting archive]:archive format:__git_archive_formats' \ '(- :)'{-l,--list}'[list available archive formats]' \ '(-v --verbose)'{-v,--verbose}'[report progress to stderr]' \ + '--mtime=[set modification time of archive entries]:mtime' \ '--prefix=-[prepend the given path prefix to each filename]:path prefix:_directories -r ""' \ '--add-file=[add untracked file to archive]:file:_files' \ + '--add-virtual-file=[add untracked file to archive]:path:_files' \ '(-o --output)'{-o+,--output=}'[write archive to specified file]:archive:_files' \ '--worktree-attributes[look for attributes in .gitattributes in working directory too]' \ $backend_args \ @@ -329,7 +338,8 @@ _git-branch () { "(- :)--show-current[show current branch name]" \ "($l $m $d)--create-reflog[create the branch's reflog]" \ "($l $m $d -f --force)"{-f,--force}'[force the creation of a new branch]' \ - "($l $m $d -t --track)"{-t,--track}'[setup configuration so that pull merges from the start point]' \ + "($l $m $d --track)-t[setup configuration so that pull merges from the start point]" \ + "($l $m $d -t)--track=-[setup configuration so that pull merges from the start point]::upstream tracking:(direct inherit)" \ "($l $m $d)--no-track[override the branch.autosetupmerge configuration variable]" \ "($l $m $d -u --set-upstream --set-upstream-to --unset-upstream)"{-u+,--set-upstream-to=}'[set up configuration so that pull merges]:remote branch:__git_remote_branch_names' \ "($l $m $d -u --set-upstream --set-upstream-to --unset-upstream)--unset-upstream[remove upstream configuration]" \ @@ -341,6 +351,7 @@ _git-branch () { $dependent_creation_args \ "($l $c $d $m)"{-m,--move}"[rename a branch and the corresponding reflog]" \ "($l $c $d $m)-M[rename a branch even if the new branch-name already exists]" \ + "--omit-empty[don't output a newline after empty formatted refs]" \ "($l $c $d $m)"{-c,--copy}"[copy a branch and the corresponding reflog]" \ "($l $c $d $m)-C[copy a branch even if the new branch-name already exists]" \ $dependent_modification_args \ @@ -350,6 +361,7 @@ _git-branch () { '*--sort=[specify field to sort on]: :__git_ref_sort_keys' \ '--points-at=[only list tags of the given object]: :__git_commits' \ "($c $m $d -i --ignore-case)"{-i,--ignore-case}'[sorting and filtering are case-insensitive]' \ + "($l $m $d)--recurse-submodules[recurse through submodules]" \ $dependent_deletion_args } @@ -383,13 +395,12 @@ _git-bundle () { _arguments \ '(-q --quiet)'{-q,--quiet}"[don't show progress]" \ '--progress[show progress meter]' \ - '--all-progress[show progress meter during object writing phase]' \ - '--all-progress-implied[similar to --all-progress when progress meter is shown]' \ + \!--all-progress{,-implied} \ '--version=[specify bundle format version]:version:(2 3)' \ ':bundle:_files' && ret=0 else local revision_options - __git_setup_revision_options + __git_setup_revision_options -d _arguments -S -s \ $revision_options \ @@ -464,13 +475,14 @@ _git-checkout () { '(-q --quiet -2 --ours -3 --theirs --patch)'{-3,--theirs}'[check out stage #3 for unmerged paths]' \ '( -B --orphan -2 --ours -3 --theirs --conflict --patch -d --detach)-b+[create a new branch based at given commit]: :__git_branch_names' \ '(-b --orphan -2 --ours -3 --theirs --conflict --patch -d --detach)-B+[create or update branch based at given commit]: :__git_branch_names' \ - '(-t --track --orphan --patch -d --detach)'{-t,--track}'[set up configuration so pull merges from the base commit]' \ + '(--track --no-track --orphan --patch -d --detach)-t[set upstream info for new branch]' \ + '(-t --no-track --orphan --patch -d --detach)--track=-[set upstream info for new branch]::configuration:(direct inherit)' \ '(--patch)--no-track[override the branch.autosetupmerge configuration variable]' \ $new_branch_reflog_opt \ '(-b -B -t --track --patch --orphan -d --detach)'{-d,--detach}'[detach the HEAD at named commit]' \ '(-b -B -t --track --patch -d --detach)--orphan=[create a new orphan branch based at given commit]: :__git_branch_names' \ '(-q --quiet -f --force -m --merge --conflict --patch)'{-m,--merge}'[3way merge current branch, working tree and new branch]' \ - '(-q --quiet -f --force -m --merge --patch)--conflict=[same as --merge, using given merge style]:style:(merge diff3)' \ + '(-q --quiet -f --force -m --merge --patch)--conflict=[same as --merge, using given merge style]:style:(merge diff3 zdiff3)' \ '(-)'{-p,--patch}'[interactively select hunks in diff between given tree-ish and working tree]' \ "--ignore-skip-worktree-bits[don't limit pathspecs to sparse entries only]" \ "--no-guess[don't second guess 'git checkout <no-such-branch>']" '!(--no-guess)--guess' \ @@ -529,10 +541,7 @@ _git-cherry-pick () { local -a git_commit_opts git_commit_opts=(--all --not HEAD --not) _arguments \ - '(- :)--quit[end revert or cherry-pick sequence]' \ - '(- :)--continue[resume revert or cherry-pick sequence]' \ - '(- :)--skip[skip current commit and continue]' \ - '(- :)--abort[cancel revert or cherry-pick sequence]' \ + - init \ '--cleanup=[specify how to strip spaces and #comments from message]:mode:_git_cleanup_modes' \ '--allow-empty[preserve initially empty commits]' \ '--allow-empty-message[allow replaying a commit with an empty message]' \ @@ -540,15 +549,21 @@ _git-cherry-pick () { '(-e --edit --ff)'{-e,--edit}'[edit commit before committing the cherry-pick]' \ '(--ff)-x[append information about what commit was cherry-picked]' \ '(-m --mainline)'{-m+,--mainline=}'[specify mainline when cherry-picking a merge commit]:parent number' \ - '--rerere-autoupdate[update index with reused conflict resolution if possible]' \ + '(--no-rerere-autoupdate)--rerere-autoupdate[update index with reused conflict resolution if possible]' \ + '(--rerere-autoupdate)--no-rerere-autoupdate' \ '(-n --no-commit --ff)'{-n,--no-commit}'[do not make the actual commit]' \ '(-s --signoff --ff)'{-s,--signoff}'[add Signed-off-by trailer at the end of the commit message]' \ '(-S --gpg-sign --no-gpg-sign)'{-S-,--gpg-sign=-}'[GPG-sign the commit]::key id' \ "(-S --gpg-sign --no-gpg-sign)--no-gpg-sign[don't GPG-sign the commit]" \ - '*'{-s+,--strategy=}'[use given merge strategy]:merge strategy:__git_merge_strategies' \ + '*--strategy=[use given merge strategy]:merge strategy:__git_merge_strategies' \ '*'{-X+,--strategy-option=}'[pass merge-strategy-specific option to merge strategy]: :_git_strategy_options' \ '(-e --edit -x -n --no-commit -s --signoff)--ff[fast forward, if possible]' \ - '*: : __git_commit_ranges -O expl:git_commit_opts' + '*: : __git_commit_ranges -O expl:git_commit_opts' \ + - '(sequencer)' \ + '--quit[end revert or cherry-pick sequence]' \ + '--continue[resume revert or cherry-pick sequence]' \ + '--skip[skip current commit and continue]' \ + '--abort[cancel revert or cherry-pick sequence]' \ } (( $+functions[_git-citool] )) || @@ -642,9 +657,9 @@ _git-clone () { '(-u --upload-pack)'{-u+,--upload-pack=}'[specify path to git-upload-pack on remote side]:remote path' \ '--template=[directory to use as a template for the object database]: :_directories' \ '*'{-c,--config}'[<key>=<value> set a configuration variable in the newly created repository]' \ - '--depth[create a shallow clone, given number of revisions deep]: :__git_guard_number depth' \ - '--shallow-since=[shallow clone since a specific time]:time' \ - '*--shallow-exclude=[shallow clone excluding commits reachable from specified remote revision]:revision' \ + '(--bundle-uri)--depth[create a shallow clone, given number of revisions deep]: :__git_guard_number depth' \ + '(--bundle-uri)--shallow-since=[shallow clone since a specific time]:time' \ + '(--bundle-uri)*--shallow-exclude=[shallow clone excluding commits reachable from specified remote revision]:revision' \ '(--no-single-branch)--single-branch[clone only history leading up to the main branch or the one specified by -b]' \ '(--single-branch)--no-single-branch[clone history leading up to each branch]' \ "--no-tags[don't clone any tags and make later fetches not follow them]" \ @@ -656,8 +671,10 @@ _git-clone () { '(-4 --ipv4 -6 --ipv6)'{-4,--ipv4}'[use IPv4 addresses only]' \ '(-4 --ipv4 -6 --ipv6)'{-6,--ipv6}'[use IPv6 addresses only]' \ '--filter=[object filtering]:filter:_git_rev-list_filters' \ + '--also-filter-submodules[apply partial clone filters to submodules]' \ '--remote-submodules[any cloned submodules will use their remote-tracking branch]' \ '--sparse[initialize the sparse-checkout file to start with only the top-level files]' \ + '(--depth --shallow-since --shallow-exclude)--bundle-uri=[before fetching, get a bundle from specified location]:uri:_urls' \ ': :->repository' \ ': :_directories' && ret=0 @@ -710,10 +727,10 @@ _git-commit () { "--no-ahead-behind[don't display detailed ahead/behind counts relative to upstream branch]" \ '(--short --dry-run)--porcelain[dry run with machine-readable output format]' \ '(--short --porcelain --dry-run -z --null)'{-z,--null}'[dry run with NULL-separated output format]' \ - {-p,--patch}'[use the interactive patch selection interface to chose which changes to commit]' \ + {-p,--patch}'[use the interactive patch selection interface to choose which changes to commit]' \ '(--reset-author)--author[override the author name used in the commit]:author name' \ '--date=[override the author date used in the commit]:date' \ - '*--trailer=[add custom trailer(s)]:trailer' \ + '*--trailer=[add custom trailer(s)]:trailer:__git_trailers_tokens' \ '(-s --signoff)'{-s,--signoff}'[add Signed-off-by trailer at the end of the commit message]' \ '(-n --no-verify)'{-n,--no-verify}'[bypass pre-commit and commit-msg hooks]' \ '--allow-empty[allow recording an empty commit]' \ @@ -722,8 +739,8 @@ _git-commit () { '(-e --edit --no-edit)'{-e,--edit}'[edit the commit message before committing]' \ '(-e --edit --no-edit)--no-edit[do not edit the commit message before committing]' \ '--no-post-rewrite[bypass the post-rewrite hook]' \ - '(-a --all --interactive -o --only -i --include)'{-i,--include}'[update the given files and commit the whole index]' \ - '(-a --all --interactive -o --only -i --include)'{-o,--only}'[commit only the given files]' \ + '(-a --all --interactive -o --only)*'{-i,--include}'[update the given files and commit the whole index]' \ + '(-a --all --interactive -i --include)*'{-o,--only}'[commit only the given files]' \ '(-u --untracked-files)'{-u-,--untracked-files=-}'[show files in untracked directories]::mode:((no\:"show no untracked files" normal\:"show untracked files and directories" all\:"show individual files in untracked directories"))' \ @@ -779,6 +796,7 @@ _git-diff () { _arguments -C -s $endopt \ $* \ $diff_options \ + '--exit-code[report exit code 1 if differences, 0 otherwise]' \ '(--exit-code)--quiet[disable all output]' \ $diff_stage_options \ '(--cached --staged)--no-index[show diff between two paths on the filesystem]' \ @@ -808,18 +826,6 @@ _git-diff () { # Otherwise, more complex conditions need to be checked. case $CURRENT in - (1) - local files_alt='files::__git_changed-in-working-tree_files' - if [[ -n ${opt_args[(I)--cached|--staged]} ]]; then - files_alt='files::__git_changed-in-index_files' - fi - - _alternative \ - 'commit-ranges::__git_commit_ranges' \ - 'blobs-and-trees-in-treeish::__git_blobs_and_trees_in_treeish' \ - $files_alt \ - 'blobs::__git_blobs ' && ret=0 - ;; (2) # Check if first argument is something special. In case of committish ranges and committishs offer a full list compatible completions. if __git_is_committish_range $line[1]; then @@ -841,10 +847,19 @@ _git-diff () { elif [[ -n ${opt_args[(I)--cached|--staged]} ]]; then # Example: git diff --cached file1 <tab> __git_changed-in-index_files && ret=0 - else - # Example: git diff file1 <tab> - __git_changed-in-working-tree_files && ret=0 fi + ;& + (1) + local files_alt='files::__git_changed-in-working-tree_files' + if [[ -n ${opt_args[(I)--cached|--staged]} ]]; then + files_alt='files::__git_changed-in-index_files' + fi + + _alternative \ + 'commit-ranges::__git_commit_ranges' \ + 'blobs-and-trees-in-treeish::__git_blobs_and_trees_in_treeish' \ + $files_alt \ + 'blobs::__git_blobs ' && ret=0 ;; (*) if __git_is_committish_range $line[1]; then @@ -893,6 +908,7 @@ _git-fetch () { '(--all -m --multiple)'{-m,--multiple}'[fetch from multiple remotes]' \ '(-n --no-tags -t --tags)'{-n,--no-tags}'[disable automatic tag following]' \ '--prefetch[modify the refspec to place all refs within refs/prefetch/]' \ + '--refetch[fetch all objects as a fresh clone would]' \ '(-P --prune-tags)'{-P,--prune-tags}'[prune local tags no longer on remote and clobber changed tags]' \ '--write-fetch-head[write fetched references to the FETCH_HEAD file]' \ "--negotiate-only[don't fetch a packfile; instead, print ancestors of negotiation tips]" \ @@ -972,6 +988,7 @@ _git-format-patch () { '--interdiff=[insert interdiff against previous patch series in cover letter or single patch]:reference to tip of previous series:__git_revisions' \ '--range-diff=[insert range-diff against previous patch series in cover letter or single patch]:reference to tip ot previous series:__git_revisions' \ '--creation-factor=[for range-diff, specify weighting for creation]:weighting (percent)' \ + '--force-in-body-from[show in-body From: even if identical to the e-mail header]' \ ': :->commit-or-commit-range' && ret=0 case $state in @@ -992,8 +1009,9 @@ _git-gc () { _arguments -S -s $endopt \ '--aggressive[more aggressively optimize]' \ '--auto[check whether housekeeping is required]' \ - '( --no-prune)--prune=-[prune loose objects older than given date]::date [2 weeks ago]:__git_datetimes' \ + '( --no-prune)--prune=-[prune loose objects older than given date]::date [2 weeks ago]:_git_approxidates' \ '(--prune )--no-prune[do not prune any loose objects]' \ + '--cruft[pack unreferenced objects separately]' \ '(-q --quiet)'{-q,--quiet}'[suppress progress reporting]' \ '--keep-largest-pack[repack all other packs except the largest pack]' \ } @@ -1056,6 +1074,7 @@ _git-grep () { '--threads=[use specified number of threads]:number of threads' \ '(-c --count -p --show-function)'{-p,--show-function}'[show preceding line containing function name of match]' \ '(-c --count -W --function-context)'{-W,--function-context}'[show whole function where a match was found]' \ + '(-m --max-count)'{-m+,--max-count=}'[specify maximum number of results per file]:results' \ '(1)*-f+[read patterns from given file]:pattern file:_files' \ '(1)*-e+[use the given pattern for matching]:pattern' \ $pattern_operators \ @@ -1293,6 +1312,7 @@ _git-merge () { $merge_options \ \*{-m+,--message=}'[set the commit message to be used for the merge commit]:merge message' \ \*{-F+,--file=}'[read commit message from a file]:file' \ + '--into-name=[use specified name instead of the real target]:branch name:__git_branch_names' \ '(--edit --no-edit)-e[open an editor to change the commit message]' \ '( --no-rerere-autoupdate)--rerere-autoupdate[allow the rerere mechanism to update the index]' \ '(--rerere-autoupdate )--no-rerere-autoupdate[do not allow the rerere mechanism to update the index]' \ @@ -1332,6 +1352,7 @@ _git-mv () { (( $+functions[_git-notes] )) || _git-notes () { local curcontext=$curcontext state line ret=1 + local -a args declare -A opt_args _arguments -C $endopt \ @@ -1369,12 +1390,18 @@ _git-notes () { (add) # TODO: Only complete commits that don't have notes already, unless # -f or --force has been given. - _arguments -S -s $endopt \ + args=( '(-f --force)'{-f,--force}'[overwrite existing note]' ) + ;& + (append) + _arguments -S -s $endopt $args \ '*'{-m+,--message=}'[use given note message]:message' \ '*'{-F+,--file=}'[take note message from given file]:note message file:_files' \ '(-C --reuse-message)'{-C+,--reuse-message=}'[take note message from given blob object]: :__git_blobs' \ '(-c --reedit-message)'{-c+,--reedit-message=}'[take note message from given blob object and edit it]: :__git_blobs' \ - '(-f --force)'{-f,--force}'[overwrite existing note]' \ + '--allow-empty[allow storing empty note]' \ + '(--no-separator)--separator=-[insert text between paragraphs]::paragraph break' \ + '(--separator)--no-separator' \ + '--stripspace[remove unnecessary whitespace]' \ ': :__git_commits' && ret=0 ;; (copy) @@ -1405,14 +1432,6 @@ _git-notes () { (remove) _arguments -S $endopt --ignore-missing --stdin ':object:__git_commits' && ret=0 ;; - (append) - _arguments -S -s $endopt \ - '*'{-m+,--message=}'[use given note message]:message' \ - '*'{-F+,--file=}'[take note message from given file]:note message file:_files' \ - '(-C --reuse-message)'{-C+,--reuse-message=}'[take note message from given blob object]: :__git_blobs' \ - '(-c --reedit-message)'{-c+,--reedit-message=}'[take note message from given blob object and edit it]: :__git_blobs' \ - ': :__git_commits' && ret=0 - ;; (get-ref) _nothing ;; @@ -1461,14 +1480,22 @@ _git-push () { # only complete files on the local end, not the remote end. Still, it may be # helpful to get some sort of completion going, perhaps modifying the path # later on to match the remote end. + + local ref_arg + if (( words[(I)-d|--delete] )); then + ref_arg='*: :__git_remote_branch_names_noprefix' + else + ref_arg='*: :__git_ref_specs_pushy' + fi + _arguments -S -s $endopt \ - '--all[push all refs under refs/heads/]' \ + '(* --all --branches --mirror --tags)'{--all,--branches}'[push all branches]' \ '--prune[remove remote branches that do not have a local counterpart]' \ - '--mirror[push all refs under refs/heads/ and refs/tags/ and delete non-existing refs]' \ + '(* --all --branches --tags)--mirror[push all refs under refs/heads/ and refs/tags/ and delete non-existing refs]' \ '(-n --dry-run)'{-n,--dry-run}'[do everything except actually send the updates]' \ '--porcelain[produce machine-readable output]' \ '(-d --delete)'{-d,--delete}'[delete all listed refs from the remote repository]' \ - '--tags[all tags under refs/tags are pushed]' \ + '(* --all --branches --mirror)--tags[all tags under refs/tags are pushed]' \ '--follow-tags[also push missing annotated tags reachable from the pushed refs]' \ '(--receive-pack --exec)'{--receive-pack=-,--exec=-}'[path to git-receive-pack on remote]:remote git-receive-pack:_files' \ '(--force-with-lease --no-force-with-lease)*--force-with-lease=-[allow refs that are not ancestors to be updated if current ref matches expected value]::ref and expectation:->lease' \ @@ -1496,7 +1523,7 @@ _git-push () { '(-4 --ipv4 -6 --ipv6)'{-4,--ipv4}'[use IPv4 addresses only]' \ '(-4 --ipv4 -6 --ipv6)'{-6,--ipv6}'[use IPv6 addresses only]' \ ': :__git_any_repositories' \ - '*: :__git_ref_specs_pushy' && ret=0 + $ref_arg && ret=0 case $state in (lease) @@ -1580,6 +1607,8 @@ _git-rebase () { '(--keep-base)--onto=[start new branch with HEAD equal to given revision]:newbase:__git_revisions' \ "(--apply --whitespace -C)--reschedule-failed-exec[automatically re-schedule any 'exec' that fails]" \ '(--apply --whitespace -C)--reapply-cherry-picks[apply all changes, even those already present upstream]' \ + '--update-refs[update branches that point to commits that are being rebased]' \ + '!(--update-refs)--no-update-refs' \ ':upstream branch:__git_revisions' \ '::working branch:__git_revisions' } @@ -1599,6 +1628,7 @@ _git-reset () { '--recurse-submodules=-[control recursive updating of submodules]::reset:__git_commits' \ '(-p --patch)'{-p,--patch}'[select diff hunks to remove from the index]' \ '(-q --quiet)'{-q,--quiet}'[suppress all output]' \ + '--no-refresh[skip refreshing the index after reset]' \ '(*)--pathspec-from-file=[read pathspec from file]:file:_files' \ '(*)--pathspec-file-nul[pathspec elements are separated with NUL character]' \ '(--soft --mixed --hard --merge --keep):: :__git_commits' \ @@ -1638,7 +1668,7 @@ _git-restore() { '(-q --quiet --progress)--no-progress[suppress progress reporting]' \ '(--no-progress)--progress[force progress reporting]' \ '(-m --merge)'{-m,--merge}'[perform a 3-way merge with the new branch]' \ - '--conflict=[change how conflicting hunks are presented]:conflict style [merge]:(merge diff3)' \ + '--conflict=[change how conflicting hunks are presented]:conflict style [merge]:(merge diff3 zdiff3)' \ '(-2 --ours -3 --theirs -m --merge)'{-2,--ours}'[checkout our version for unmerged files]' \ '(-2 --ours -3 --theirs -m --merge)'{-3,--theirs}'[checkout their version for unmerged files]' \ '(-p --patch)'{-p,--patch}'[select hunks interactively]' \ @@ -1690,6 +1720,7 @@ _git-revert () { '*'{-X+,--strategy-option=}'[pass merge-strategy-specific option to merge strategy]: :_git_strategy_options' \ '(-S --gpg-sign --no-gpg-sign)'{-S-,--gpg-sign=-}'[GPG-sign the commit]::key id' \ "(-S --gpg-sign --no-gpg-sign)--no-gpg-sign[don't GPG-sign the commit]" \ + "--reference[use the 'reference' format to refer to commits in log message]" \ ': :__git_recent_commits' } @@ -1832,6 +1863,7 @@ _git-sparse-checkout() { add:'update the sparse-checkout file to include additional patterns' reapply:'reapply the sparsity pattern rules to paths in the working tree' disable:'disable the config setting, and restore all files in the working directory' + check-rules:'check whether sparsity rules match one or more paths' ) _describe -t commands command commands && ret=0 @@ -1842,13 +1874,22 @@ _git-sparse-checkout() { init) _arguments \ '--cone[allow for better performance with a limited set of patterns]' \ - '--no-sparse-index[rewrite index to not be sparse]' + '--no-sparse-index[rewrite index to not be sparse]' && ret=0 ;; set|add) _arguments -S \ - '--stdin[read patterns from input]' \ + '--cone[initialize the sparse-checkout in cone mode]' \ + '--sparse-index[toggle the use of a sparse index]' \ + '--skip-checks[skip some sanity checks on the given paths that might give false positives]' \ + '(*)--stdin[read patterns from input]' \ '*:pattern:_files' && ret=0 ;; + check-rules) + _arguments \ + '-z[terminate input and output files by a NUL character]' \ + '--cone[interpret rules file patterns as cone mode patterns]' \ + '--rules-file=[use patterns in specified file]:file:_files' && ret=0 + ;; esac ;; esac @@ -1867,10 +1908,11 @@ _git-stash () { '(-k --keep-index --no-keep-index)'{-k,--keep-index}'[all changes already added to the index are left intact]' '(-k --keep-index)--no-keep-index[all changes already added to the index are undone]' '(-q --quiet)'{-q,--quiet}'[suppress all output]' - '(-p --patch -a --all -u --include-untracked)'{-u,--include-untracked}'[include untracked files]' - '(-p --patch -a --all -u --include-untracked)'{-a,--all}'[include ignored files]' + '(-p --patch -a --all -u --include-untracked -S --staged)'{-u,--include-untracked}'[include untracked files]' + '(-p --patch -a --all -u --include-untracked -S --staged)'{-a,--all}'[include ignored files]' '(* -p --patch)--pathspec-from-file=[read pathspec from file]:file:_files' '(* -p --patch)--pathspec-file-nul[pathspec elements are separated with NUL character]' + '(-S --staged -a --all -u --include-untracked)'{-S,--staged}'[only stash changes that are currently staged]' ) _arguments -C \ @@ -1892,6 +1934,7 @@ _git-stash () { clear:'remove all the stashed states' drop:'remove a single stashed state from the stash list' create:'create a stash without storing it in the ref namespace' + store:'store a stash created with git stash create in the stash ref' ) _describe -t commands command commands && ret=0 @@ -1928,7 +1971,9 @@ _git-stash () { __git_setup_diff_options _arguments -S -s $endopt \ - $diff_options \ + ${diff_options:#*\)-u*} \ + '(-u --include-untracked --only-untracked)'{-u,--include-untracked}'[show the untracked files in the stash entry as part of the diff]' \ + '(-u --include-untracked)--only-untracked[show only the untracked files in the stash entry as part of the diff]' \ ':: :__git_stashes' && ret=0 ;; (pop|apply) @@ -1950,9 +1995,14 @@ _git-stash () { '(-q --quiet)'{-q,--quiet}'[suppress all output]' \ ':: :__git_stashes' && ret=0 ;; + (store) + _arguments -S -s $endopt \ + '(-m --message)'{-m+,--message=}'[specify stash description]:description' \ + '(-q --quiet)'{-q,--quiet}'[suppress all output]' && ret=0 + ;; (create) - _nothing - ;; + _message -e messages message + ;; (*) _nothing ;; @@ -2056,7 +2106,6 @@ _git-submodule () { '*: :__git_ignore_line_inside_arguments __git_submodules' && ret=0 ;; (update) - # TODO: --init not properly documented. _arguments -S \ '(-q --quiet)'{-q,--quiet}'[suppress all output]' \ '(-N --no-fetch)'{-N,--no-fetch}'[do not fetch new objects from repository]' \ @@ -2070,6 +2119,7 @@ _git-submodule () { '--force[discard local changes by checking out the current up-to-date version]' \ '--init[initialize uninitialized submodules]' \ '--single-branch[clone only one branch]' \ + '--filter=[apply partial clone filter to the submodule]:filter' \ '*: :__git_ignore_line_inside_arguments __git_submodules' && ret=0 ;; (set-branch) @@ -2141,7 +2191,7 @@ _git-subtree () { _arguments -C \ '(-q --quiet)'{-q,--quiet}'[suppress progress output]' \ '(-P --prefix)'{-P+,--prefix=}'[the path to the subtree in the repository to manipulate]: :_directories' \ - '-d[show debug messages]' \ + '(-d --debug)'{-d,--debug}'[show debug messages]' \ ': :->command' \ '*::: := ->option-or-argument' && ret=0 @@ -2238,9 +2288,10 @@ _git-switch() { '(-q --quiet --progress)--no-progress[suppress progress reporting]' \ '--progress[force progress reporting]' \ '(-m --merge --discard-changes --orphan)'{-m,--merge}'[perform a 3-way merge with the new branch]' \ - '(--discard-changes --orphan)--conflict=[change how conflicting hunks are presented]:conflict style [merge]:(merge diff3)' \ + '(--discard-changes --orphan)--conflict=[change how conflicting hunks are presented]:conflict style [merge]:(merge diff3 zdiff3)' \ '(-d --detach -c --create -C --force-create --ignore-other-worktrees --orphan --guess --no-guess 1)'{-d,--detach}'[detach HEAD at named commit]' \ - '(-t --track --no-track --guess --orphan 1)'{-t,--track}'[set upstream info for new branch]' \ + '(--track --no-track --guess --orphan 1)-t[set upstream info for new branch]' \ + '(-t --no-track --guess --orphan 1)--track=-[set upstream info for new branch]::configuration:(direct inherit)' \ "(-t --track --guess --orphan 1)--no-track[don't set upstream info for a new branch]" \ '(-c --create -C --force-create -d --detach --ignore-other-worktrees -m --merge --conflict -t --track --guess --no-track -t --track)--orphan[create new unparented branch]: :__git_branch_names' \ '!--overwrite-ignore' \ @@ -2301,6 +2352,7 @@ _git-tag () { "*--no-contains=[only list tags that don't contain the specified commit]: :__git_commits" \ '--merged=-[print only tags that are merged]:: :__git_commits' \ '--no-merged=-[print only tags that are not merged]:: :__git_commits' \ + "--omit-empty[don't output a newline after empty formatted refs]" \ '--sort=[specify how the tags should be sorted]:field:__git_ref_sort_keys' \ '--points-at=[only list tags of the given object]: :__git_commits' \ '--format=[specify format to use for the output]:format:__git_format_ref' \ @@ -2332,6 +2384,7 @@ _git-worktree() { lock:'prevent a working tree from being pruned' move:'move a working tree to a new location' remove:'remove a working tree' + repair:'repair worktree administrative files' unlock:'allow working tree to be pruned, moved or deleted' ) @@ -2346,23 +2399,34 @@ _git-worktree() { else args=( ':commit:__git_commits' ) fi - _arguments -S $endopt \ + _arguments -s -S $endopt \ '(-f --force)'{-f,--force}'[checkout branch even if already checked out in another worktree]' \ - '(-B --detach)-b+[create a new branch]: :__git_branch_names' \ - '(-b --detach)-B+[create or reset a branch]: :__git_branch_names' \ - '(-b -B)--detach[detach HEAD at named commit]' \ + '(-B -d --detach --guess-remote)-b+[create a new branch]: :__git_branch_names' \ + '(-b -d --detach --guess-remote)-B+[create or reset a branch]: :__git_branch_names' \ + '(-b -d --detach)--orphan[create unborn/orphaned branch]' \ + '(-d --detach -b -B --orphan --guess-remote --track --no-track)'{-d,--detach}'[detach HEAD at named commit]' \ '--no-checkout[suppress file checkout in new worktree]' \ '--lock[keep working tree locked after creation]' \ + '--reason=[specify reason for locking]:reason' \ + '(2 --no-guess-remote -b -B -d --detach)--guess-remote[guess remote tracking branch from path basename]' \ + "(--guess-remote)--no-guess-remote[don't guess remote tracking branch from path basename]" \ + '(--no-track -d --detach)--track[set upstream info for new branch]' \ + "(--track -d --detach)--no-track[don't set upstream info for new branch]" \ + '(-q --quiet)'{-q,--quiet}'[suppress feedback messages]' \ ':path:_directories' $args && ret=0 ;; (prune) - _arguments -S $endopt \ + _arguments -s -S $endopt \ '(-n --dry-run)'{-n,--dry-run}"[don't remove, show only]" \ '(-v --verbose)'{-v,--verbose}'[report pruned objects]' \ - '--expire[expire objects older than specified time]:time' && ret=0 + '--expire=[expire objects older than specified time]: :_git_approxidates' && ret=0 ;; (list) - _arguments -S $endopt '--porcelain[machine-readable output]' && ret=0 + _arguments -S $endopt \ + '(-v --verbose --porcelain -z)'{-v,--verbose}'[output additional information about worktrees]' \ + "--expire=[add 'prunable' annotation to worktrees older than specified time]: :_git_approxidates" \ + '(-v)--porcelain[machine-readable output]' \ + '(-v)-z[terminate each line with a NUL rather than a newline]' && ret=0 ;; (lock) _arguments -C -S $endopt '--reason=[specify reason for locking]:reason' ': :->worktrees' && ret=0 @@ -2373,9 +2437,13 @@ _git-worktree() { ':location:_directories' && ret=0 ;; (remove) - _arguments -C -S $endopt '--force[remove working trees that are not clean or that have submodules]' \ + _arguments -C -S $endopt \ + '(-f --force)'{-f,--force}'[remove working trees that are not clean or that have submodules]' \ ': :->worktrees' && ret=0 ;; + (repair) + _directories && ret=0 + ;; (unlock) state=worktrees ;; @@ -3829,7 +3897,11 @@ _git-pack-refs () { '( --no-all)--all[pack all refs]' \ '(--all )--no-all[do not pack all refs]' \ '( --no-prune)--prune[remove loose refs after packing them]' \ - '(--prune )--no-prune[do not remove loose refs after packing them]' + '(--prune )--no-prune[do not remove loose refs after packing them]' \ + '*--include=[references to include]:reference pattern:_git_full_references' \ + '*--exclude=[references to exclude]:reference pattern:_git_full_references' \ + '--no-include[clear and reset the list of include patterns]' \ + '--no-exclude[clear and reset the list of exclude patterns]' } (( $+functions[_git-prune] )) || @@ -3838,7 +3910,7 @@ _git-prune () { '(-n --dry-run)'{-n,--dry-run}'[do not remove anything; just report what would be removed]' \ '(-v --verbose)'{-v,--verbose}'[report all removed objects]' \ '--progress[show progress]' \ - '--expire=[only expire loose objects older than specified date]: :__git_datetimes' \ + '--expire=[only expire loose objects older than specified date]: :_git_approxidates' \ '--exclude-promisor-objects[limit traversal to objects outside promisor packfiles]' \ '*:: :__git_heads' } @@ -3886,8 +3958,8 @@ _git-reflog () { _arguments -S \ '(-n --dry-run)'{-n,--dry-run}"[don't actually prune any entries; show what would be pruned]" \ '--stale-fix[prune any reflog entries that point to "broken commits"]' \ - '--expire=-[prune entries older than given time]: :__git_datetimes' \ - '--expire-unreachable=-[prune entries older than given time and unreachable]: :__git_datetimes' \ + '--expire=-[prune entries older than given time]:age [90 days]:_git_approxidates' \ + '--expire-unreachable=-[prune entries older than given time and unreachable]:age [30 days]:_git_approxidates' \ '--all[prune all refs]' \ '--updateref[update ref with SHA-1 of top reflog entry after expiring or deleting]' \ '--rewrite[adjust reflog entries to ensure old SHA-1 points to new SHA-1 of previous entry after expiring or deleting]' \ @@ -3895,7 +3967,7 @@ _git-reflog () { ;; (delete) _arguments -C -S \ - '(-n --dry-run)'{-n,--dry-run}"[dpn't update entries; show what would be done]" \ + '(-n --dry-run)'{-n,--dry-run}"[don't update entries; show what would be done]" \ '--updateref[update ref with SHA-1 of top reflog entry after expiring or deleting]' \ '--rewrite[adjust reflog entries to ensure old SHA-1 points to new SHA-1 of previous entry after expiring or deleting]' \ '--verbose[output additional information]' \ @@ -3975,7 +4047,9 @@ _git-remote () { ': :__git_remotes' && ret=0 ;; (rename) - _arguments \ + _arguments -S $endopt \ + '(--no-progress)--progress' \ + '(--progress)--no-progress' \ ':old name:__git_remotes' \ ':new name:__git_remotes' && ret=0 ;; @@ -4033,8 +4107,10 @@ _git-repack () { _arguments -s \ '(-A --unpack-unreachable)-a[pack all objects into a single pack]' \ '(-a -k --keep-unreachable)-A[pack all objects into a single pack, but unreachable objects become loose]' \ + '--cruft[pack unreachable cruft objects separately]' \ + '--cruft-expiration=[expire cruft objects older than specified time]: :_git_approxidates' \ '-d[remove redundant packs after packing]' \ - "--unpack-unreachable=[with -A, don't loosen objects older than specified date]:date" \ + "--unpack-unreachable=[with -A, don't loosen objects older than specified date]: :_git_approxidates" \ '-f[pass --no-reuse-delta option to git pack-objects]' \ '-F[pass --no-reuse-object option to git pack-objects]' \ "-n[don't update server information]" \ @@ -4042,7 +4118,7 @@ _git-repack () { '(-l --local)'{-l,--local}'[pass --local option to git pack-objects]' \ '(-b --write-bitmap-index)'{-b,--write-bitmap-index}'[write a bitmap index]' \ '(-i --delta-islands)'{-i,--delta-islands}'[pass --delta-islands to git-pack-objects]' \ - "--unpack-unreachable=[with -A, don't loosen objects older than specified time]:time" \ + "--unpack-unreachable=[with -A, don't loosen objects older than specified time]: :_git_approxidates" \ '(-k --keep-unreachable)'{-k,--keep-unreachable}'[with -a, repack unreachable objects]' \ '--window=[number of objects to consider when doing delta compression]:number of objects' \ '--window-memory=[scale window size dynamically to not use more than specified amount of memory]: : __git_guard_bytes' \ @@ -4052,7 +4128,8 @@ _git-repack () { '--pack-kept-objects[repack objects in packs marked with .keep]' \ '--keep-pack=[ignore named pack]:pack' \ '(-g --geometric)'{-g+,--geometric=}'[find a geometric progression with specified factor]:factor' \ - '(-m --write-midx)'{-m,--write-midx}'[write a multi-pack index of the resulting packs]' + '(-m --write-midx)'{-m,--write-midx}'[write a multi-pack index of the resulting packs]' \ + '--expire-to=[pack prefix to store a pack containing pruned objects]:directory:_directories' } (( $+functions[_git-replace] )) || @@ -4085,7 +4162,7 @@ _git-blame () { declare -A opt_args declare -a revision_options - __git_setup_revision_options + __git_setup_revision_options -d # TODO: Not sure about __git_cached_files. _arguments -C -S -s $endopt \ @@ -4128,7 +4205,8 @@ _git-blame () { else _alternative \ 'line-numbers: :__git_guard_number "line number"' \ - 'regexes::_guard "(/[^/]#(\\?[^/]#)#(/|)|)" regex' && ret=0 + 'regexes::_guard "(/[^/]#(\\?[^/]#)#(/|)|)" regex' \ + 'functions::_guard "(|:*)" "function name"' && ret=0 fi ;; esac @@ -4139,8 +4217,9 @@ _git-blame () { (( $+functions[_git-bugreport] )) || _git-bugreport() { _arguments \ - '(-o --output-directory)'{-o+,--output-directory=}'[specify a destination for the bugreport file]:directory:_directories' \ - '(-s --suffix)'{-s+,--suffix=}'[specify a strftime format suffix for the filename]:format:_date_formats' + '--diagnose=-[create an additional zip archive of detailed diagnostics]::mode [stats]:(stats all)' \ + '(-o --output-directory)'{-o+,--output-directory=}'[specify a destination for the bugreport]:directory:_directories' \ + '(-s --suffix)'{-s+,--suffix=}'[specify a strftime format filename suffix]:format:_date_formats' } (( $+functions[_git-cherry] )) || @@ -4160,6 +4239,14 @@ _git-count-objects () { {-H,--human-readable}'[print sizes in human readable format]' } +(( $+functions[_git-diagnose] )) || +_git-diagnose() { + _arguments -S $endopt \ + '(-o --output-directory)'{-o+,--output-directory=}'[specify a destination for the diagnostics archive]:destination:_directories' \ + '(-s --suffix)'{-s+,--suffix=}'[specify a strftime format suffix for the filename]:format:_date_formats' \ + '--mode=[specify the content of the diagnostic archive]:content [stats]:(stats all)' +} + (( $+functions[_git-difftool] )) || _git-difftool () { # TODO: Is this fine, or do we need to modify the context or similar? @@ -4189,9 +4276,10 @@ _git-fsck () { '--full[check all object directories]' \ '--connectivity-only[check only connectivity]' \ '--strict[do strict checking]' \ - '(-v --verbose)'{-v,--verbose}'[output additional information]' \ + '(-v --verbose --no-progress)'{-v,--verbose}'[output additional information]' \ '--lost-found[write dangling objects into .git/lost-found]' \ - '--progress[show progress]' \ + "(-v --verbose)--no-progress[don't show progress]" \ + '!(-v --verbose --no-progress)--progress' \ '--name-objects[show verbose names for reachable objects]' \ '*: :__git_objects' } @@ -4204,14 +4292,19 @@ _git-get-tar-commit-id () { (( $+functions[_git-help] )) || _git-help () { _arguments -S -s \ - '(-c --config -i --info -m --man -w --web)'{-a,--all}'[show all available commands]' \ + '(-a --all -g --guides --user-interfaces --developer-interfaces -c --config -i --info -m --man -w --web)'{-a,--all}'[show all available commands]' \ + '(-g --guides --user-interfaces --developer-interfaces -c --config -i --info -m --man -w --web)--no-external-commands[exclude external commands, with --all]' \ + '(-g --guides --user-interfaces --developer-interfaces -c --config -i --info -m --man -w --web)--no-aliases[exclude aliases, with --all]' \ + '(-a --all -g --guides --user-interfaces --developer-interfaces -c --config -i --info -w --web)'{-m,--man}'[display manual for the command in man format]' \ + '(-a --all -g --guides --user-interfaces --developer-interfaces -c --config -i --info -m --man)'{-w,--web}'[display manual for the command in HTML format]' \ + '(-a --all -g --guides --user-interfaces --developer-interfaces -c --config -m --man -w --web)'{-i,--info}'[display manual for the command in info format]' \ + '!(--no-verbose)'{-v,--verbose} \ + "--no-verbose[don't print command descriptions]" \ + '(-)'{-g,--guides}'[print list of useful guides]' \ + '(-)--user-interfaces[print list of user-facing repository, command and file interfaces]' \ + '(-)--developer-interfaces[print list of file formats, protocols and other developer interfaces]' \ '(-)'{-c,--config}'[print all configuration variable names]' \ - '(-a --all -g --guides -c --config -m --man -w --web)'{-i,--info}'[display manual for the command in info format]' \ - '(-a --all -g --guides -c --config -i --info -w --web)'{-m,--man}'[display manual for the command in man format]' \ - '(-a --all -g --guides -c --config -i --info -m --man)'{-w,--web}'[display manual for the command in HTML format]' \ - '(-g --guides -c --config -i --info -m --man -w --web)'{-g,--guides}'[prints a list of useful guides on the standard output]' \ - '(-v --verbose)'{-v,--verbose}'[print command descriptions]' \ - ': : _alternative commands:command:_git_commands "guides:git guide:(attributes cli core-tutorial cvs-migration diffcore everyday glossary hooks ignore modules namespaces repository-layout revisions tutorial tutorial-2 workflows)"' + ': : _alternative commands:command:_git_commands "guides:git guide:_git_help_guides"' } (( $+functions[_git-instaweb] )) || @@ -4248,7 +4341,16 @@ _git-instaweb () { (( $+functions[_git-merge-tree] )) || _git-merge-tree () { - _arguments \ + _arguments -S $endopt \ + '(1)--write-tree[do a real merge instead of a trivial merge]' \ + '(-)--trivial-merge[do a trivial merge only]' \ + '(--no-messages)--messages[also show informational/conflict messages]' \ + "(--messages)--no-messages[don't show informational/conflict messages]" \ + '-z[separate paths with the NUL character]' \ + '--name-only[list filenames without modes/oids/stages]' \ + '--allow-unrelated-histories[allow merging unrelated histories]' \ + '--stdin[perform multiple merges, one per line of input]' \ + '--merge-base=[specify a merge-base for the merge]:commit:__git_commits' \ ':base-tree:__git_tree_ishs' \ ':branch 1:__git_tree_ishs' \ ':branch 2:__git_tree_ishs' @@ -4261,14 +4363,14 @@ _git-rerere () { _arguments -C -S -s $endopt \ '--rerere-autoupdate[register clean resolutions in index]' \ - ': :->command' && ret=0 + ': :->command' \ + '*: :{ [[ $words[CURRENT-1] = forget ]] && __git_cached_files }' && ret=0 case $state in (command) - # TODO: This isn't optimal, as forget get confused. _values command \ 'clear[reset metadata used by rerere]' \ - 'forget[resets metadata used by rerere for specific conflict]: :__git_cached_files' \ + 'forget[resets metadata used by rerere for specific conflict]' \ 'diff[output diffs for the current state of the resolution]' \ 'status[print paths with conflicts whose merge resolution rerere will record]' \ 'remaining[print paths with conflicts that have not been autoresolved by rerere]' \ @@ -4344,8 +4446,8 @@ _git-rev-parse () { '--is-inside-work-tree[show whether or not current working directory is inside work tree]' \ '--is-bare-repository[show whether or not repository is bare]' \ '(--revs-only --no-revs --flags --no-flags --verify)--short=-[show only shorter unique name]:: :__git_guard_number length' \ - '(--since --after)'{--since=-,--after=-}'[show --max-age= parameter corresponding given date string]:datestring' \ - '(--until --before)'{--until=-,--before=-}'[show --min-age= parameter corresponding given date string]:datestring' \ + '(--since --after)'{--since=-,--after=-}'[show --max-age= parameter corresponding given date string]: :_git_approxidates' \ + '(--until --before)'{--until=-,--before=-}'[show --min-age= parameter corresponding given date string]: :_git_approxidates' \ '--resolve-git-dir[check if <path> is a valid repository or gitfile and print location]:git dir:_files -/' \ '*: :__git_objects' && ret=0 fi @@ -4385,7 +4487,7 @@ _git-show-branch () { if compset -P '[[:digit:]]##,'; then _alternative \ 'counts: :__git_guard_number count' \ - 'dates::__git_datetimes' && ret=0 + 'dates::_git_approxidates' && ret=0 else __git_guard_number limit fi @@ -4564,6 +4666,8 @@ _git-send-email () { '--relogin-delay=[specify delay between successive logins]:delay (seconds)' \ '--cc-cmd=[specify command to generate Cc\: header with]:Cc\: command:_cmdstring' \ '--to-cmd=[specify command to generate To\: header with]:To\: command:_cmdstring' \ + '--header-cmd=[specify command to generate headers with]:header command:_cmdstring' \ + '--no-header-cmd[disable any header command in use]' \ '( --no-chain-reply-to)--chain-reply-to[send each email as a reply to previous one]' \ '(--chain-reply-to )--no-chain-reply-to[send all emails after first as replies to first one]' \ '--identity=[specify configuration identity]: :__git_sendemail_identities' \ @@ -4891,7 +4995,7 @@ _git-apply () { _arguments -S -s $endopt \ $apply_options \ - '(--index --cached --reject)'{-3,--3way}'[fall back on 3-way merge if patch fails]' \ + '(--index --cached --reject)'{-3,--3way}'[attempt three-way merge, fall back on normal patch if that fails]' \ '--stat[output diffstat for input (turns off "apply")]' \ '--numstat[same as --stat but in decimal notation and complete pathnames (turns off "apply")]' \ '--summary[output summary of git-diff extended headers (turns off "apply")]' \ @@ -4906,8 +5010,10 @@ _git-apply () { '--no-add[ignore additions made by the patch]' \ '--allow-overlap[allow overlapping hunks]' \ '--inaccurate-eof[work around missing-new-line-at-EOF bugs]' \ - '(-v --verbose)'{-v,--verbose}'[display progress on stderr]' \ + '(-v --verbose -q --quiet)'{-v,--verbose}'[display progress on stderr]' \ + '(-q --quiet -v --verbose)'{-q,--quiet}'[be more quiet]' \ '--recount[do not trust line counts in hunk headers]' \ + "--allow-empty[don't return error for empty patches]" \ '*:patch:_files' } @@ -4924,8 +5030,9 @@ _git-checkout-index () { '(-q --quiet)'{-q,--quiet}'[no warning for existing files and files not in index]' \ '(-f --force)'{-f,--force}'[force overwrite of existing files]' \ '(-a --all --stdin *)'{-a,--all}'[check out all files in index]' \ - '(-n --no-create)'{-n,--no-create}'[do not checkout new files]' \ + '(-n --no-create)'{-n,--no-create}"[don't checkout new files]" \ '--temp[write content to temporary files]' \ + "--ignore-skip-worktree-bits[don't skip files with skip-worktree set]" \ '(-a --all *)--stdin[read list of paths from the standard input]' \ '--prefix=[prefix to use when creating files]:directory:_directories' \ '--stage=[check out files from named stage]:stage:(1 2 3 all)' \ @@ -4947,7 +5054,7 @@ _git-commit-graph() { '(--reachable --stdin-packs)--stdin-commits[walk commits starting at commits read from input]' '(--append)--size-multiple=:commits [2]' '(--append)--max-commits=:commits' - '(--append)--expire-time=:date/time:__git_datetimes' + '(--append)--expire-time=: :_git_approxidates' '--max-new-filters=[specify maximum number of changed-path bloom filters to compute]:' ) elif [[ $words[2] = verify ]]; then @@ -5034,7 +5141,8 @@ _git-merge-file () { '(--ours --union)--theirs[resolve conflicts favoring their side of the lines]' \ '(--ours --theirs )--union[resolve conflicts favoring both sides of the lines]' \ '--marker-size[specify length of conflict markers]: :__git_guard_number "marker length"' \ - '--diff3[use a diff3 based merge]' \ + '(--zdiff3)--diff3[show conflicts in "diff3" style]' \ + '(--diff3)--zdiff3[show conflicts in "zdiff3" style]' \ ':current file:_files' \ ':base file:_files' \ ':other file:_files' @@ -5116,7 +5224,9 @@ _git-pack-objects () { '--include-tag[include unasked-for annotated tags if object they reference is included]' \ '(--revs --stdin-packs --unpack-unreachable)--keep-unreachable[add objects unreachable from refs in packs named with --unpacked to resulting pack]' \ '(--revs --stdin-packs)--pack-loose-unreachable[pack unreachable loose objects]' \ - '(--revs --stdin-packs --keep-unreachable)--unpack-unreachable=-[keep unreachable objects in loose form]::time' \ + '(--revs --stdin-packs --keep-unreachable)--unpack-unreachable=-[keep unreachable objects in loose form]:: :_git_approxidates' \ + '--cruft[create a cruft pack]' \ + '--cruft-expiration=[expire cruft objects older than specified time]: :_git_approxidates' \ '--sparse[use sparse reachability algorithm]' \ '--include-tag[include tag objects that refer to objects to be packed]' \ $thin_opt \ @@ -5194,6 +5304,7 @@ _git-symbolic-ref () { '(-q --quiet)'{-q,--quiet}'[do not issue error if specified name is not a symbolic ref]' \ '--short[shorten the ref name (eg. refs/heads/master -> master)]' \ '-m[update reflog for specified name with specified reason]:reason for update' \ + '--no-recurse[stop after dereferencing a single level of symbolic ref]' \ ':symbolic reference:__git_heads' \ ':: :__git_references' } @@ -5289,8 +5400,8 @@ _git-cat-file () { _arguments -S -s \ '(-t -s -e -p --allow-unknown-type 1)--textconv[show content as transformed by a textconv filter]' \ '(-t -s -e -p --allow-unknown-type 1)--filters[show content as transformed by filters]' \ - '(-t -s -e -p --allow-unknown-type 1)--path=[use a specific path for --textconv/--filters]:path:_directories' \ - query \ + '(-t -s -e -p --allow-unknown-type 1)--path=[use a specific path for --textconv/--filters]:path:_directories' \ '(-s -e -p --textconv --filters 1)-t[show type of given object]' \ '(-t -e -p --textconv --filters 1)-s[show size of given object]' \ '(-e -p --textconv --filters 1)--allow-unknown-type[allow query of broken/corrupt objects of unknown type]' \ @@ -5299,12 +5410,14 @@ _git-cat-file () { '(-):object type:(blob commit tag tree)' \ ': :__git_objects' \ - batch \ - '(--batch-check)--batch=-[print SHA1, type, size and contents (or in specified format)]::format' \ - '(--batch)--batch-check=-[print SHA1, type and size (or in specified format)]::format' \ + '(--batch-check --batch-command)--batch=-[print SHA1, type, size and contents (or in specified format)]::format' \ + '(--batch --batch-command)--batch-check=-[print SHA1, type and size (or in specified format)]::format' \ + '(--batch-check --batch)--batch-command=-[enter a command mode that reads commands and arguments from stdin]::format' \ '--follow-symlinks[follow in-tree symlinks (used with --batch or --batch-check)]' \ '--batch-all-objects[show all objects with --batch or --batch-check]' \ "--unordered[don't order --batch-all-objects output]" \ - '--buffer[disable flushing of output after each object]' + '--buffer[disable flushing of output after each object]' \ + '-Z[input and output is NUL-delimited instead of newline-delimited]' } (( $+functions[_git-diff-files] )) || @@ -5332,8 +5445,11 @@ _git-diff-index () { # to given tree-ish? This should be done for git-diff as well, in that case. _arguments -S \ $revision_options \ + '--exit-code[report exit code 1 if differences, 0 otherwise]' \ + '(--exit-code)--quiet[disable all output]' \ "--cached[don't consider the work tree at all]" \ '-m[flag non-checked-out files as up-to-date]' \ + '--merge-base[use merge base instead of comparing directly]' \ ': :__git_tree_ishs' \ '*: :__git_cached_files' } @@ -5350,16 +5466,18 @@ _git-diff-tree () { # __git_setup_revision_options, but only used by this command, so only have # them here. _arguments -C -S -s \ - $revision_options \ + ${revision_options:#*--cc\[*} \ + '--exit-code[report exit code 1 if differences, 0 otherwise]' \ + '(--exit-code)--quiet[disable all output]' \ '-r[recurse into subdirectories]' \ '(-r )-t[display tree objects in diff output]' \ '--root[display root diff]' \ + '--merge-base[use merge base instead of comparing directly]' \ '-m[do not ignore merges]' \ '-s[do not show differences]' \ '(--pretty --header)-v[display commit message before differences]' \ '--no-commit-id[do not display commit IDs]' \ - '(-c --cc)-c[show differences from each of parents to merge result]' \ - '(-c --cc)--cc[how differences from each of parents and omit differences from only one parent]' \ + '(-c)--cc[combined diff format for merge commits, further omitting uninteresting hunks]' \ '--combined-all-paths[show name of file in all parents for combined diffs]' \ '--always[always show commit itself and commit log message]' \ ': :__git_tree_ishs' \ @@ -5396,21 +5514,24 @@ _git-for-each-ref () { # is, %(refname), %(objecttype), %(objectsize), %(objectname) with optional '*' # in front. _arguments -S -s \ + "--omit-empty[don't output a newline after empty formatted refs]" \ '--count=[maximum number of refs to iterate over]: :__git_guard_number "maximum number of refs"' \ '*--sort=[key to sort refs by]: :__git_ref_sort_keys' \ '--format=-[output format of ref information]:format:__git_format_ref' \ '--color=-[respect any colors specified in the format]::when:(always never auto)' \ + '--exclude=[exclude refs which match pattern]:pattern:_git_full_references' \ '*--points-at=[print only refs which point at the given object]:object:__git_commits' \ '*--merged=[print only refs that are merged]:object:__git_commits' \ '*--no-merged=[print only refs that are not merged]:object:__git_commits' \ '*--contains=[print only refs that contain specified commit]:object:__git_commits' \ "*--no-contains=[print only refs that don't contain specified commit]:object:__git_commits" \ '--ignore-case[sorting and filtering are case-insensitive]' \ + '(1)--stdin[read reference patterns from stdin]' \ '(-s --shell -p --perl --python --tcl)'{-s,--shell}'[use string literals suitable for sh]' \ '(-s --shell -p --perl --python --tcl)'{-p,--perl}'[use string literals suitable for Perl]' \ '(-s --shell -p --perl --tcl)'--python'[use string literals suitable for Python]' \ '(-s --shell -p --perl --python )'--tcl'[use string literals suitable for Tcl]' \ - ':: :_guard "([^-]?#|)" pattern' + ':: :_git_full_references' } (( $+functions[_git-for-each-repo] )) || @@ -5435,15 +5556,15 @@ _git-ls-files () { '(-c --cached)'{-c,--cached}'[show cached files in output]' \ '(-d --deleted)'{-d,--deleted}'[show deleted files in output]' \ '(-m --modified)'{-m,--modified}'[show modified files in output]' \ - '(-o --others)'{-o,--others}'[show other files in output]' \ + '(-o --others --format)'{-o,--others}'[show other files in output]' \ '(-i --ignored)'{-i,--ignored}'[show ignored files in output]' \ - '(-s --stage --with-tree)'{-s,--stage}'[show stage files in output]' \ + '(-s --stage --with-tree --format)'{-s,--stage}'[show stage files in output]' \ '--directory[if a whole directory is classified as "other", show just its name]' \ - '--eol[show line endings of files]' \ + '(--format)--eol[show line endings of files]' \ $no_empty_directory_opt \ '(-s --stage -u --unmerged --with-tree)'{-u,--unmerged}'[show unmerged files in output]' \ - '--resolve-undo[show resolve-undo information]' \ - '(-k --killed)'{-k,--killed}'[show killed files in output]' \ + '(--format)--resolve-undo[show resolve-undo information]' \ + '(-k --killed --format)'{-k,--killed}'[show killed files in output]' \ '-z[separate paths with the NUL character]' \ '*'{-x,--exclude=-}'[skip files matching given pattern]:file pattern' \ '*'{-X,--exclude-from=-}'[skip files matching patterns in given file]: :_files' \ @@ -5458,6 +5579,8 @@ _git-ls-files () { '--abbrev=[use specified digits to display object names]:digits' \ '--debug[show debugging data]' \ '--deduplicate[suppress duplicate entries]' \ + '--sparse[show sparse directories in the presence of a sparse index]' \ + '(-s --stage -o --others -k --killed --resolve-undo --eol)--format=[specify format to use for the output]:format' \ '*:: :_files' } @@ -5488,9 +5611,11 @@ _git-ls-tree () { '(-t)-d[do not show children of given tree (implies -t)]' \ '-r[recurse into subdirectories]' \ '-t[show tree entries even when going to recurse them]' \ - '(-l --long --name-only --name-status)'{-l,--long}'[show object size of blob entries]' \ + '(-l --long --name-only --name-status --format)'{-l,--long}'[show object size of blob entries]' \ '-z[use NUL termination on output]' \ - '(--name-only --name-status --abbrev)'{--name-only,--name-status}'[list only filenames, one per line]' \ + '(--name-only --name-status -l --long --object-only --format --abbrev)'{--name-only,--name-status}'[list only filenames, one per line]' \ + '(--name-only --name-status --format)--object-only[list only objects]' \ + '(--name-only --name-status -l --long --object-only)--format=[specify format to use for the output]:format' \ '(--name-only --name-status)--abbrev=[use specified digits to display object names]:digits' \ '--full-name[output full path-names]' \ '(--full-name)--full-tree[do not limit listing to current working-directory]' \ @@ -5525,12 +5650,13 @@ _git-name-rev () { '*--refs=[only use refs matching given pattern]: :_guard "?#" "shell pattern"' \ '--no-refs[clear any previous ref patterns given]' \ '*--exclude=[ignore refs matching specified pattern]:pattern' \ - '(--stdin :)--all[list all commits reachable from all refs]' \ - '(--all :)--stdin[read from stdin and append revision-name]' \ + '(--annotate-stdin :)--all[list all commits reachable from all refs]' \ + '(--all :)--annotate-stdin[annotate text from stdin]' \ + '!(--all : --annotate-stdin)--stdin' \ '--name-only[display only name of commits]' \ '--no-undefined[die with non-zero return when a reference is undefined]' \ '--always[show uniquely abbreviated commit object as fallback]' \ - '(--stdin --all)*: :__git_commits' + '(--annotate-stdin --all)*: :__git_commits' } (( $+functions[_git-pack-redundant] )) || @@ -5548,7 +5674,7 @@ _git-rev-list () { declare -A opt_args declare -a revision_options - __git_setup_revision_options + __git_setup_revision_options -d _arguments -C -S $endopt \ $revision_options \ @@ -5563,6 +5689,8 @@ _git-rev-list () { "--no-object-names[don't print the names of the object IDs that are found]" \ '!(--no-object-names)--object-names)' \ '--timestamp[print raw commit timestamp]' \ + "*--exclude-hidden=[don't include refs that would be hidden by git-receive-pack or git-upload-pack]:value:(fetch receive uploadpack)" \ + '--disk-usage=-[print space used for storage by the selected commits or objects]::value:(human)' \ '( --bisect-vars --bisect-all)--bisect[show only middlemost commit object]' \ '(--bisect)--bisect-vars[same as --bisect, displaying shell-evalable code]' \ '(--bisect)--bisect-all[display all commit objects between included and excluded commits]' \ @@ -5847,46 +5975,51 @@ _git-upload-pack () { (( $+functions[_git-check-attr] )) || _git-check-attr () { - local z_opt= - - local curcontext=$curcontext state line ret=1 + local curcontext="$curcontext" z_opt ret=1 + local -a state line declare -A opt_args if (( words[(I)--stdin] )); then - z_opt='-z[paths are separated with NUL character when reading from stdin]' + z_opt='-z[terminate input file list and output records by a NUL character]' + else + z_opt='-z[separate output records with NUL character]' fi - _arguments -C \ - {-a,--all}'[list all attributes that are associated with the specified paths]' \ + _arguments -C $z_opt \ '--stdin[read file names from stdin instead of from command line]' \ - '--cached[consider .gitattributes in the index only, ignoring the working tree.]' \ - '-z[terminate input and output records by a NUL character]' \ - $z_opt \ + '(--source)--cached[consider .gitattributes in the index only, ignoring the working tree]' \ + '(--cached)--source=[specify tree to scan for .gitattributes (useful in bare repo)]:tree object:__git_tree_ishs' \ + - files \ + '(-a --all --)'{-a,--all}'[list all attributes that are associated with the specified paths]' \ '(-)--[interpret preceding arguments as attributes and following arguments as path names]' \ - '*:: :->attribute-or-file' && ret=0 + '*: :__git_cached_files' \ + - attrs \ + '*:::attribute:->attributes' && ret=0 case $state in - (attribute-or-file) - local -a attributes - - attributes=(crlf ident filter diff merge) - - local only_attributes=1 - for (( i = 2; i < $#words; i++ )); do - if (( attributes[(I)$words[i]] == 0 )); then - only_attributes=0 - break - fi - done - - if (( !only_attributes )) || [[ -n ${opt_args[(I)--]} ]]; then - __git_cached_files && ret=0 - else - _alternative \ - 'attributes::__git_attributes' \ - 'files::__git_cached_files' && ret=0 - fi - ;; + attributes) + local -a attributes plain dedup + attributes=( + crlf:"line-ending convention (deprecated)" + text:"line-ending normalization" + eol:"line-ending style" + working-tree-encoding:"text encoding in working directory" + ident:'$Id$ substitution' + filter:"filters" + diff:"textual diff" + merge:"merging strategy" + conflict-marker-size:"length of markers left in the work tree" + whitespace:"control over what diff and apply should consider whitespace errors" + export-ignore:"exclude from archive files" + export-subst:"expand placeholders when adding to an archive" + delta:"don't attempt compression of blobs" + encoding:"character encoding that should be used by GUI tools" + ) + plain=( ${attributes%%:*} ) + dedup=( "${(@)words[1,CURRENT-1]}" ) + (( ! ${#dedup:|plain} )) && _describe -t git-attributes \ + attribute attributes -F dedup && ret=0 + ;; esac return ret @@ -5910,9 +6043,28 @@ _git-fmt-merge-msg () { '( --no-log)--log=-[display one-line descriptions from actual commits being merged]::number of commits [20]' \ '(--log )--no-log[do not display one-line descriptions from actual commits being merged]' \ '(-m --message)'{-m+,--message=}'[use given message instead of branch names for first line in log message]:message' \ - '(-F --file)'{-F,--file}'[specify list of merged objects from file]: :_files' + '--into-name=[specify substitute name for the real target branch to use]:name' \ + '(-F --file)'{-F+,--file=}'[specify list of merged objects from file]: :_files' +} + +(( $+functions[_git-hook] )) || +_git-hook() { + local -a args + local gitdir=$(_call_program gitdir git rev-parse --git-dir) + [[ -f $gitdir/gitdir ]] && gitdir=$(<$gitdir/gitdir) # needed in worktrees + + (( ${(M)#words[1,CURRENT-1]:#[^-]*} >= 3 )) && args=( + {--,--end-of-options}'[end options to git hook, allowing options to the hook itself]' + ) + [[ -n ${(M)words[1,CURRENT-1]:#--(|end-of-options)} ]] && args=( '*:: :_default' ) + _arguments $args \ + '--ignore-missing[ignore any missing hook by quietly returning zero]' \ + "--to-stdin=[specify file which will be redirected to hook's stdin]:file:_files" \ + '1:subcommand:(run)' \ + '2:hook name:compadd $gitdir/hooks/*(x\:t)' } + (( $+functions[_git-mailinfo] )) || _git-mailinfo () { # TODO: --no-inbody-headers is undocumented. @@ -5952,7 +6104,8 @@ _git-merge-one-file () { _git-patch-id () { _arguments \ '--stable[use a sum of hashes unaffected by diff ordering]' \ - '--unstable[use patch-id compatible with git 1.9 and older]' + '--unstable[use patch-id compatible with git 1.9 and older]' \ + "--verbatim[don't strip whitespace from the patch]" } # NOTE: git-sh-setup isn't a user command. @@ -6167,6 +6320,7 @@ _git_commands () { blame:'show what revision and author last modified each line of a file' bugreport:'collect information for user to file a bug report' count-objects:'count unpacked objects and display their disk consumption' + diagnose:'generate an archive of diagnostic information' difftool:'show changes using common diff tools' fsck:'verify connectivity and validity of objects in database' help:'display help information about git' @@ -6196,7 +6350,7 @@ _git_commands () { checkout-index:'copy files from index to working directory' commit-graph:'write and verify Git commit-graph files' commit-tree:'create new commit object' - hash-object:'compute object ID and optionally create a blob from a file' + hash-object:'compute object ID and optionally create an object from a file' index-pack:'build pack index file for an existing packed archive' merge-file:'run a three-way file merge' merge-index:'run merge for files needing merging' @@ -6258,6 +6412,7 @@ _git_commands () { check-ref-format:'ensure that a reference name is well formed' column:'display data in columns' fmt-merge-msg:'produce merge commit message' + hook:'run git hooks' mailinfo:'extract patch and authorship from a single email message' mailsplit:'split mbox file into a list of files' merge-one-file:'standard helper-program to use with git merge-index' @@ -6301,6 +6456,18 @@ _git_commands () { _alternative $alts } +(( $+functions[_git_help_guides] )) || +_git_help_guides() { + local -a guides userint devint + guides=( ${${${(M)${(f)"$(_call_program git-guides git help -g)"}:# *}## #}/ ##/:} ) + userint=( ${${${(M)${(f)"$(_call_program git-guides git help --user-interfaces)"}:# *}## #}/ ##/:} ) + devint=( ${${${(M)${(f)"$(_call_program git-guides git help --developer-interfaces)"}:# *}## #}/ ##/:} ) + _alternative \ + 'git-guides: : _describe -t git-guides guide guides' \ + 'user-interfaces: : _describe -t user-interfaces "user interface" userint' \ + 'developer-interfaces: : _describe -t developer-interfaces "developer interfaces" devint' +} + (( $+functions[__git_aliases] )) || __git_aliases () { local -a aliases @@ -6338,7 +6505,7 @@ __git_date_formats () { declare -a date_formats if compset -P 'format(-local|):'; then - _strftime + _date_formats return fi @@ -6565,20 +6732,6 @@ __git_compression_levels () { '9:maximum compression' } -(( $+functions[__git_attributes] )) || -__git_attributes () { - local -a attributes - - attributes=( - 'crlf:line-ending convention' - 'ident:ident substitution' - 'filter:filters' - 'diff:textual diff' - 'merge:merging strategy') - - _describe -t attributes attribute attributes $* -} - (( $+functions[__git_daemon_service] )) || __git_daemon_service () { local -a services @@ -6994,7 +7147,6 @@ __git_heads_remote () { (( $+functions[__git_commit_objects] )) || __git_commit_objects () { - local gitdir expl start declare -a commits if [[ -n $PREFIX[(r)@] ]] || [[ -n $SUFFIX[(r)@] ]]; then @@ -7016,7 +7168,7 @@ __git_commit_objects () { (( $+functions[__git_recent_commits] )) || __git_recent_commits () { - local gitdir expl start + local expl declare -a descr tags heads commits argument_array_names commit_opts local h i j k ret integer distance_from_head @@ -7300,6 +7452,16 @@ __git_remote_references () { __git_references } +(( $+functions[_git_full_references] )) || +_git_full_references() { + + if [[ $_git_full_refs_cache_pwd != $PWD ]]; then + _git_full_refs_cache=( ${(f)"$(_call_program references 'git for-each-ref --format=%\(refname\)')"} ) + _git_full_refs_cache_pwd=$PWD + fi + _multi_parts "$@" / _git_full_refs_cache +} + (( $+functions[__git_notes_refs] )) || __git_notes_refs () { local expl @@ -7395,6 +7557,19 @@ __git_deleted_files () { __git_files --deleted deleted-files 'deleted file' $* } +(( $+functions[__git_trailers_tokens] )) || +__git_trailers_tokens() { + declare -a trailers + local i + + local -a gtrailers=( $(_call_program trailers git config --name-only --get-regexp '^trailer\..*\.key$') ) + for i in $gtrailers; do + i=( ${${(@s:.:)i}[2,-2]} ) + trailers+=( ${(j|.|)i} ) + done + _wanted trailers expl "trailer" compadd -a trailers +} + (( $+functions[__git_modified_files] )) || __git_modified_files () { __git_files --modified modified-files 'modified file' $* @@ -7616,10 +7791,65 @@ __git_guard_bytes () { _numbers -u bytes ${*:-size} k m g } -(( $+functions[__git_datetimes] )) || -__git_datetimes () { - # TODO: Use this in more places. - _guard '*' 'time specification' +(( $+functions[_git_approxidates] )) || +_git_approxidates() { + local MATCH MBEGIN MEND + local match mbegin mend + local -i date time num + local -a months=( January February March April May June July August September + October November December ) + local -a weekdays=( Sunday Monday Tuesday Wednesday Thursday Friday Saturday ) + local -a numbers=( zero one two three four five six seven eight nine ten ) + local -a periods=( second minute hour day week month year ) + local -a suf=( -S. -r "._,+\\ \t\n\-" ) + + local -a pexpl + zparseopts -D -E X+:=pexpl + + local -a query=( + \( /$'*\0[ \t\n]#'/ \) + \( '/[]/' ':dates:date:compadd "${pexpl[@]:/-X/-x}"' + \| '/(@|[0-9](#c9))/' ':specials:special:compadd -S "" @' '/[]/' ': _message -e epochtimes "seconds since Unix epoch"' + \| '/(#i)(now|never)/' '%?%' ':specials:special:(now never)' '/[]/' + \| \) + \( + \( '/(#i)(one|last)/' '%[ ._,+]%' -'num=1' + \| '/[0-9](#c2,4)(-|/|.|)[0-9](#c1,2)(-|/|.|)[0-9](#c1,4)(|T)/' -'date=3' + \| '/[0-9](#c2)(:|)[0-9](#c2)(:|)[0-9](#c2)(.<->|)/' -'time=1' + \| '/20/' -'((!date))' '/[]/' ':dates:date:_dates -f "%y-%m-%d"' + \| '/1/' -'num=1' + \| '/<->/' -'num=2' + \| "/(#i)(${(j.|.)numbers})/" '%[ ._,+]%' -'num=2' + \| "/(#i)(${(j.|.)${(@)months//(#b)(???)(*)/$match[1]${match[2]//(#m)?/(|$MATCH}${match[2]//?/)}}})/" + '%[ ._,+]%' -'(( num = 0, date |= 2 ))' + \| "/(#i)(${(j.|.)${(@)weekdays//(#b)(???)(*)/$match[1]${match[2]//(#m)?/(|$MATCH}${match[2]//?/)}}})(|s)/" + '%[ ._,+]%' -'(( num = 0, date |= 1 ))' + \| '/(#i)yesterday/' '%[ ._,+]%' -'date=3' + \| "/(#i)(${(j.|.)${(@)periods%s}})(|s)/" '%[ ._,+]%' -'num=0' + \| '/(#i)(noon|midnight|tea|[ap]m)/' '%[ ._,+]%' -'time=1' + \| + \( // -'(( !(date&2) ))' // ':months:month:compadd -o nosort $suf -a months' \| \) + \( // -'(( num <= 1 && !(date&1) ))' // ':weekdays:weekday:compadd $suf -o nosort -a weekdays' \| \) + \( // -'(( num > 1 ))' + \( // -'(( date < 3 ))' // ':periods:period:compadd $suf -o nosort ${^periods[4,-1]}s' \| \) + \( // -'(( !(date&1) ))' // ':weekdays:weekday:compadd $suf -o nosort ${^weekdays}s' \| \) + \( // -'(( !time ))' // ':periods:period:compadd $suf -o nosort ${^periods[1,3]}s' \| \) + \| // -'(( num == 1 ))' + \( // -'(( date < 3 ))' // ':periods:period:compadd $suf -o nosort -a "periods[4,-1]"' \| \) + \( // -'(( !time ))' // ':periods:period:compadd $suf -o nosort -a "periods[1,3]"' \| \) + \| // -'(( num == 0 ))' + \( // -'(( !time ))' // ':specials:special:compadd $suf noon midnight tea AM PM' \| \) + \( // -'(( !date ))' // ':specials:special:compadd $suf yesterday' \| \) + // ':specials:special:compadd $suf last' # "last" is equivalent to "one" + // ':numbers:number:compadd $suf -n -o nosort -a numbers' + \) + '/[]/' + \) '/([ ._,+]|)/' + \) \# + ) + + _regex_arguments _git_dates "$query[@]" + _git_dates } (( $+functions[__git_stages] )) || @@ -7639,6 +7869,7 @@ __git_setup_log_options () { # TODO: Need to implement -<n> for limiting the number of commits to show. log_options=( '(- *)-h[display help]' + '--clear-decorations[clear all previously-defined decoration filters]' '--decorate-refs=[only decorate refs that match pattern]:pattern' "--decorate-refs-exclude=[don't decorate refs that match pattern]:pattern" '( --no-decorate)--decorate=-[print out ref names of any commits that are shown]: :__git_log_decorate_formats' @@ -7679,8 +7910,9 @@ __git_setup_diff_options () { local exclusive_diff_options='(--name-only --name-status --check -s --no-patch)' diff_options=( - {-p,-u,--patch}'[generate diff in patch format]' - {-U,--unified=}'[generate diff with given lines of context]: :__git_guard_number lines' + '(-p -u --patch)'{-p,-u,--patch}'[generate diff in patch format]' + '(-U --unified -W --function-context)'{-U-,--unified=-}'[generate diff with given lines of context]:: :__git_guard_number lines' + '(-U --unified -W --function-context)'{-W,--function-context}'[show whole function where a match was found]' \ '--raw[generate default raw diff output]' '--patch-with-raw[generate patch but also keep the default raw diff output]' $exclusive_diff_options{-s,--no-patch}'[suppress diff output]' @@ -7761,7 +7993,6 @@ __git_setup_diff_options () { '--output-indicator-new=[specify the character to indicate a new line]:character [+]' '--output-indicator-old=[specify the character to indicate a old line]:character [-]' '--output-indicator-context=[specify the character to indicate a context line]:character [ ]' - '--exit-code[report exit code 1 if differences, 0 otherwise]' '( --no-ext-diff)--ext-diff[allow external diff helper to be executed]' '(--ext-diff )--no-ext-diff[disallow external diff helper to be executed]' '(--textconv --no-textconv)--textconv[allow external text conversion filters to be run when comparing binary files]' @@ -7770,9 +8001,13 @@ __git_setup_diff_options () { '(--no-prefix)--src-prefix=[use given prefix for source]:prefix' '(--no-prefix)--dst-prefix=[use given prefix for destination]:prefix' '--line-prefix=[prepend additional prefix to every line of output]:prefix' - '(--src-prefix --dst-prefix)--no-prefix[do not show any source or destination prefix]' + "(--src-prefix --dst-prefix)--no-prefix[don't show any source or destination prefix]" + '!(--src-prefix --dst-prefix --no-prefix)--default-prefix' '(-c --cc)'{-c,--cc}'[combined diff format for merge commits]' - '--output=[output to a specific file]: :_files') + '--output=[output to a specific file]: :_files' + '--expand-tabs=-[replace each tab with spaces]::tab width [8]' + '!(--expand-tabs)--no-expand-tabs' + ) } (( $+functions[__git_setup_diff_stage_options] )) || @@ -7882,11 +8117,15 @@ __git_format_placeholders() { (( $+functions[__git_setup_revision_options] )) || __git_setup_revision_options () { - local -a diff_options - __git_setup_diff_options + if [[ $1 = "-d" ]]; then # don't include diff options if passed -d + revision_options=() + else + local -a diff_options + __git_setup_diff_options + revision_options=( $diff_options ) + fi - revision_options=( - $diff_options + revision_options+=( '(-v --header)'{--pretty=-,--format=-}'[pretty print commit messages]::format:__git_format_placeholders' '(--abbrev-commit --no-abbrev-commit)--abbrev-commit[show only partial prefixes of commit object names]' '(--abbrev-commit --no-abbrev-commit)--no-abbrev-commit[show the full 40-byte hexadecimal commit object name]' @@ -7906,8 +8145,8 @@ __git_setup_revision_options () { '--count[display how many commits would have been listed]' '(-n --max-count)'{-n+,--max-count=}'[maximum number of commits to display]: :__git_guard_number' '--skip=[skip given number of commits before output]: :__git_guard_number' - '(--max-age --since --after)'{--since=,--after=}'[show commits more recent than given date]:date' - '(--min-age --until --before)'{--until=,--before=}'[show commits older than given date]: :__git_guard_number timestamp' + '(--max-age --since --after)'{--since=,--after=}'[show commits more recent than given date]: :_git_approxidates' + '(--min-age --until --before)'{--until=,--before=}'[show commits older than given date]: :_git_approxidates' '( --since --after)--max-age=-[maximum age of commits to output]: :__git_guard_number timestamp' '( --until --before)--min-age[minimum age of commits to output]: :__git_guard_number timestamp' '*--author=[limit commits to those by given author]:author' @@ -7934,8 +8173,7 @@ __git_setup_revision_options () { '--tags=-[show all commits from refs/tags]::pattern' '--remotes=-[show all commits from refs/remotes]::pattern' '--glob=[show all commits from refs matching glob]:pattern' - '--exclude=[do not include refs matching glob]:pattern' - '--exclude=[do not include refs matching glob]:pattern' + "--exclude=[don't include refs matching glob]:pattern" '--ignore-missing[ignore invalid object an ref names on command line]' '--bisect[pretend as if refs/bisect/bad --not refs/bisect/good-* was given on command line]' '(-g --walk-reflogs --reverse)'{-g,--walk-reflogs}'[walk reflog entries from most recent to oldest]' @@ -8021,6 +8259,7 @@ __git_setup_fetch_options () { '--refmap=[specify refspec to map refs to remote tracking branches]:refspec' '(-4 --ipv4 -6 --ipv6)'{-4,--ipv4}'[use IPv4 addresses only]' '(-4 --ipv4 -6 --ipv6)'{-6,--ipv6}'[use IPv6 addresses only]' + '--porcelain[machine-readable output]' '--dry-run[show what would be done, without making any changes]' '(-f --force)'{-f,--force}'[force overwrite of local reference]' '(-k --keep)'{-k,--keep}'[keep downloaded pack]' @@ -8415,7 +8654,7 @@ _git() { # TODO: This needs an update # TODO: How do we fix -c argument? _arguments -C \ - '(- :)--version[display version information]' \ + '(- :)'{-v,--version}'[display version information]' \ '(- :)--help[display help message]' \ '-C[run as if git was started in given path]: :_directories' \ \*{-c,--config-env=}'[pass configuration parameter to command]: :->configuration' \ @@ -8428,7 +8667,6 @@ _git() { '--git-dir=[path to repository]: :_directories' \ '--work-tree=[path to working tree]: :_directories' \ '--namespace=[set the Git namespace]:namespace' \ - '--super-prefix=[set a prefix which gives a path from above a repository down to its root]:path:_directories' \ '--bare[use $PWD as repository]' \ '--no-replace-objects[do not use replacement refs to replace git objects]' \ '--literal-pathspecs[treat pathspecs literally, rather than as glob patterns]' \ diff --git a/Completion/Unix/Command/_global b/Completion/Unix/Command/_global index ffd8c0dce..4ffd7f8ce 100644 --- a/Completion/Unix/Command/_global +++ b/Completion/Unix/Command/_global @@ -9,15 +9,18 @@ _arguments \ "$cmds"{-I,--idutils}'[print all lines which match pattern using id-utils]:pattern' \ "$cmds"{-p,--print-dbpath}'[print location of GTAGS]' \ "$cmds"{-P,--path}'[print paths matching pattern]:pattern:' \ + "$cmds"'--print[print locate of root/dbpath/conf]:name:(root dbpath conf)' \ "$cmds"{-u,--update}'[locate tag files and update incrementally]' \ '(-a --absolute)'{-a,--absolute}'[print absolute path names]' \ '(--color)--color=-[color matches]::color:(always auto never)' \ + '(-C --directory)'{-C,--directory}'[change the directory before doing all the work]:dir:_files -/' \ '(-d --definition)'{-d,--definition}'[print locations of definitions]' \ '(-e --regexp :)'{-e,--regexp}'[specify pattern]:pattern:_global_tags' \ + '(-E --extended-regexp -G --basic-regexp)'{-E,--extended-regexp}'[interpret pattern as a extended regular expression]' \ '(--encode-path)--encode-path=-[encode path characters in hexadecimal representation]:format' \ '(-F --first-match)'{-f,--first-match}'[stop searching if tag is found in current tag file]' \ '(--from-here)--from-here=-[decide tag type by context]:line_path:' \ - '(-G --basic-regexp :)'{-G,--basic-regexp}'[specify basic regexp to use]:word:_global_tags' \ + '(-E --extended-regexp -G --basic-regexp)'{-G,--basic-regexp}'[interpret pattern as a basic regular expression]' \ '(--gtagsconf)--gtagsconf=-[set environment variable GTAGSCONF]:file:_files' \ '(--gtagslabel)--gtagslabel=-[set environment variable GTAGSLABEL]:file:_files' \ '(-i --ignore-case)'{-i,--ignore-case}'[ignore case in patterns]' \ @@ -27,6 +30,7 @@ _arguments \ '(-M --match-case)'{-m,--match-case}'[enable case sensitive search]' \ '(--match-part)--match-part=-[specify how path name completion should match]::part:(first last all)' \ '(-n --nofilter)'{-n,--nofilter}'[suppress sort filter and path conversion filter]' \ + '(-N --nearness)'{-N,--nearness=-}'[use nearness sort method for the output]:start:_files' \ '(-O --only-other)'{-O,--only-other}'[search only text files]' \ '(-o --other)'{-o,--other}'[search in other files, not just source files (with -g)]' \ '(--path-style)--path-style=-[specify path style]::style:(relative absolute shorter abslib through)' \ @@ -34,11 +38,12 @@ _arguments \ '(-q --quiet)'{-q,--quiet}'[quiet mode]' \ '(-r --reference --rootdir)'{-r,--reference,--rootdir}'[find object references instead of definitions]' \ '(--result)--result=-[specify result format]::format:(path ctags ctags-x grep cscope)' \ - '(- :)--single-update=-[updata tag for specified file]:file:_files' \ + '(- :)--single-update=-[update tag for specified file]:file:_files' \ '(-s --symbol)'{-s,--symbol}'[find symbols instead of function names]:pattern' \ '(-t --tags)'{-t,--tags}'[output in standard ctags format]' \ '(-T --through -s -r -l)'{-T,--through}'[search through all tag files in GTAGSLIBPATH]' \ '(-v --verbose)'{-v,--verbose}'[verbose mode]' \ + '(-V --invert-match)'{-V,--invert-match}'[invert the sense of matching, to select non-matching lines]' \ '(-x --cxref)'{-x,--cxref}'[additionally list line number and contents]' \ '(- :)--version[display version information]' \ '(- :)--help[display help information]' \ diff --git a/Completion/Unix/Command/_gnutls b/Completion/Unix/Command/_gnutls index b9f91264d..9b8bcf6ea 100644 --- a/Completion/Unix/Command/_gnutls +++ b/Completion/Unix/Command/_gnutls @@ -4,8 +4,7 @@ local -a args args=( '(- :)'{-h,--help}'[display help information]' - '(- :)--version=[display version information]:information:((v\:simple c\:copyright n\:full))' - '(- :)-v[display version information]' + '(- :)'{-v+,--version=-}'[display version information]:information:((v\:simple c\:copyright n\:full))' '(- :)'{-\!,--more-help}'[display help information through a pager]' '(-d --debug)'{-d,--debug}'[enable debugging]:debug level' \*{-V,--verbose}'[more verbose output]' @@ -17,6 +16,11 @@ case "$service" in '(-p --port)'{-p,--port}'[specify port or service to connect to]:port:_ports' ) ;| + gnutls-*|certtool) + args+=( + '--attime=[perform validation at the timestamp instead of the system time]:timestamp' + ) + ;| gnutls-cli*) args+=( '(--app-proto --starttls-proto)'{--app-proto,--starttls-proto}"=[specify application protocol to use to obtain the server's certificate]:protocol:(https ftp smtp imap ldap xmpp lmtp pop3 nntp sieve postgres)" @@ -30,6 +34,7 @@ case "$service" in '(-u --udp)'{-u,--udp}'[use DTLS (datagram TLS) over UDP]' '--mtu=[set MTU for datagram TLS]:mtu' '--srtp-profiles=[offer SRTP profiles]:string' + '*--compress-cert=[compress certificate]:compression method' '(-b --heartbeat)'{-b,--heartbeat}'[activate heartbeat support]' '--x509fmtder[use DER format for certificates to read from]' '--priority=[specify TLS algorithms and protocols to enable]:(NORMAL PFS SECURE128 SECURE192 SUITEB128 SUITEB192 LEGACY PERFORMANCE NONE)' @@ -94,7 +99,8 @@ case "$service" in '--post-handshake-auth[enable post-handshake authentication under TLS1.3]' '--inline-commands[inline commands of the form ^<cmd>^]' '--inline-commands-prefix=[change delimiter used for inline commands]:delimiter [^]' - '--fips140-mode[report status of FIPS140-2 mode in gnutls library]' + '--fips140-mode[report status of FIPS140-3 mode in gnutls library]' + '--list-config[report configuration of the library]' '--logfile=[redirect informational messages to a specific file]:file:_files' '--waitresumption[block waiting for the resumption data under TLS1.3]' '--ca-auto-retrieve[enable automatic retrieval of missing CA certificates]' @@ -127,6 +133,7 @@ case "$service" in '--ignore-ocsp-response-errors[ignore any errors when setting the OCSP response]' '--recordsize=[specify maximum record size to advertise]:record size (0-16384)' '--httpdata=[specify data to use as HTTP response]:file:_files' + '--timeout=[specify he timeout period for server]:timeout' ) ;; diff --git a/Completion/Unix/Command/_gpg b/Completion/Unix/Command/_gpg index 5d54865d5..2161d2d24 100644 --- a/Completion/Unix/Command/_gpg +++ b/Completion/Unix/Command/_gpg @@ -93,6 +93,7 @@ fi '--no-default-recipient[reset default recipient]' '*--encrypt-to[specify recipient]:key:->public-keys' '(--encrypt-to)--no-encrypt-to[disable the use of all --encrypt-to keys]' + '--group[set up email aliases]:spec' '-z[specify compression level]:compression level:((0\:no\ compression 1\:minimum 2 3 4 5 6\:default 7 8 9\:maximum))' '(-t --textmode)'{-t,--textmode}'[use canonical text mode]' '(-n --dry-run)'{-n,--dry-run}"[don't make any changes]" @@ -117,6 +118,7 @@ fi '--utf8-strings' '--no-utf8-strings[arguments are not in UTF8]' '(--no-options)--options[specify file to read options from]:options file:_files' "(--options)--no-options[don't read options file]" + '--log-file[write server mode logs to file]:file:_files' '--'{attribute,passphrase,command}'-fd:file descriptor:_file_descriptors' '--sk-comments[include secret key comments when exporting keys]' '(--emit-version)--no-emit-version[omit version string in clear text signatures]' @@ -170,6 +172,9 @@ fi '--ctapi-driver[file to use to access smartcard reader]:file:_files' '--pcsc-driver[file to use to access smartcard reader]:file:_files' '--auto-key-locate:parameters' + '--auto-key-import[import missing key from a signature]' + '--include-key-block[include the public key in signatures]' + '--disable-dirmngr[disable all access to the dirmngr]' '--dump-options[show all options]' ) diff --git a/Completion/Unix/Command/_gprof b/Completion/Unix/Command/_gprof index a7e602fd5..6b97506a6 100644 --- a/Completion/Unix/Command/_gprof +++ b/Completion/Unix/Command/_gprof @@ -4,7 +4,7 @@ local curcontext="$curcontext" state line ret=1 typeset -A opt_args _arguments -C -s -{a,b,c,D,h,i,l,L,r,s,T,v,w,x,y,z} \ - -{A,C,e,E,f,F,J,n,N,O,p,P,q,Q,R,S,t,Z}:'function name:->funcs' \ + -{A,B,C,e,E,f,F,J,n,N,O,p,P,q,Q,R,S,t,Z}:'function name:->funcs' \ '-I:directory:_dir_list' \ '-d-:debug level:' '-k:function names:->pair' \ '-m:minimum execution count:' \ diff --git a/Completion/Unix/Command/_gradle b/Completion/Unix/Command/_gradle index c1f7c05ee..280aa243f 100644 --- a/Completion/Unix/Command/_gradle +++ b/Completion/Unix/Command/_gradle @@ -92,7 +92,7 @@ if [[ $state == task && ! -prefix - ]]; then zle -R "Generating cache from $gradle_buildfile" # Run gradle/gradlew and retrieve possible tasks. - for outputline in ${(f)"$($service --build-file $gradle_buildfile -q tasks --all)"}; do + for outputline in ${(f)"$($words[1] --build-file $gradle_buildfile -q tasks --all)"}; do # Tasks and subprojects each start with a lowercase letter, but whereas tasks are in camelCase, each # subproject consists of one or more sections of kebab-case, with each section ending in a ':'. diff --git a/Completion/Unix/Command/_grep b/Completion/Unix/Command/_grep index 2dcbff4a3..0f1e712fd 100644 --- a/Completion/Unix/Command/_grep +++ b/Completion/Unix/Command/_grep @@ -89,7 +89,7 @@ case $variant:$OSTYPE in ;| gpl2:(freebsd|darwin)*) arguments+=( - '(--null --no-filename -h)--null[print 0 byte after each filename]' + '(--no-filename -h)--null[print 0 byte after each filename]' '(-Z --decompress -J --bz2decompress)'{-J,--bz2decompress}"[decompress bzip2'ed input before searching]" '(-Z --decompress -J --bz2decompress)'{-Z,--decompress}"[decompress gzip'ed input before searching]" ) @@ -129,6 +129,7 @@ case $variant:$OSTYPE in arguments=( ${(M)arguments:#((#s)|*\))--(context|binary-files|line-buffered|label|max-count)*} ${${arguments:#((#s)|*\))(\*|)-[d-]*}/\)-r/\)-R} + '(-h)--null[print 0 byte after each filename]' "-U[search binary files but don't print them]" '-Z[behave as zgrep]' ) diff --git a/Completion/Unix/Command/_head b/Completion/Unix/Command/_head index 0771b1e4d..8877600f6 100644 --- a/Completion/Unix/Command/_head +++ b/Completion/Unix/Command/_head @@ -9,6 +9,7 @@ if _pick_variant gnu=GNU unix --version; then '(-n --lines -c --bytes)'{-n+,--lines=}'[print the first (or with -, all but the last) specified lines]:number of lines:->number' '(-q --quiet --silent -v --verbose)'{-q,--quiet,--silent}'[never print headers giving file names]' '(-q --quiet --silent -v --verbose)'{-v,--verbose}'[always print headers giving file names]' + '(-z --zero-terminated)'{-z,--zero-terminated}'[line delimiter is NUL, not newline]' '(- *)--help[display help and exit]' '(- *)--version[output version information and exit]' ) diff --git a/Completion/Unix/Command/_iconv b/Completion/Unix/Command/_iconv index bf04acfe4..fba0b9afe 100644 --- a/Completion/Unix/Command/_iconv +++ b/Completion/Unix/Command/_iconv @@ -63,7 +63,7 @@ else '1:file:_files' && return 0 if [[ $state = codeset ]]; then - if [[ $OSTYPE = freebsd* ]]; then + if [[ $OSTYPE = (freebsd|dragonfly|netbsd|darwin)* ]]; then codeset=( $(_call_program codesets $words[1] -l) ) elif [[ -f /usr/lib/iconv/iconv_data ]]; then # IRIX & Solaris codeset=( ${${(f)"$(</usr/lib/iconv/iconv_data)"}%%[[:blank:]]*} ) diff --git a/Completion/Unix/Command/_id b/Completion/Unix/Command/_id index a0a03faad..c123afcd7 100644 --- a/Completion/Unix/Command/_id +++ b/Completion/Unix/Command/_id @@ -41,13 +41,13 @@ else darwin*|dragonfly*|freebsd*) args+=( '(-)-P[print id in the form of a password file entry]' ) ;| - darwin*|freebsd*) + freebsd*) args+=( '(-)-A[print process audit user ID]' '(-)-M[print MAC label of the current process]' + '(-)-c[print current login class]' ) ;| - freebsd*) args+=( '(-)-c[print current login class]' ) ;| darwin*|dragonfly*|freebsd*|netbsd*|openbsd*) args+=( '(-)-p[human readable output]' ) ;; diff --git a/Completion/Unix/Command/_ifconfig b/Completion/Unix/Command/_ifconfig index 25ddd55bd..86ec46038 100644 --- a/Completion/Unix/Command/_ifconfig +++ b/Completion/Unix/Command/_ifconfig @@ -13,17 +13,25 @@ updownlist=( case $OSTYPE in darwin*) - args=( -s $updownlist ) + args=( -s $updownlist + '-X+[list interfaces whose names match regular expression]:regex:_net_interfaces' + ) opts=( $alias $debug delete dest_address ipdst nsellength {,-}trailers {,-}link{0,1,2} ) - ;; + ;| freebsd*|dragonfly*) - args=( -s $updown - '(-a -l -u -d -m -L 1 *)-C[list interface cloners]' - '(-l -C)-m[list supported media]' - '(-l -C)-L[show address lifetime as time offset]' + args=( -s $updownlist + '(-C)-f+[control the output format]: :_values -s, -S\: format + "addr[adjust inet address display]\:format [numeric]\:(default fqdn host numeric)" + "ether[adjust ethernet address display]\:format [colon]\:(colon dash dotted default)" + "inet[adjust inet subnet mask display]\:format [hex]\:(default cidr dotted hex)" + "inet6[adjust inet6 prefix display]\:format [numeric]\:(default cidr numeric)"' + '(-C)-G+[exclude members of the specified group]:group' + '(-C)-g+[limit output to members of the specified group]:group' + '(-C)-k[print keying information for the interface]' + '(-C)-n[disable automatic loading of network interface drivers]' ) listopts=( active caps chan countries mac mesh regdomain roam txparam txpower @@ -37,6 +45,17 @@ case $OSTYPE in roam roam:rssi roam:rate roaming ) ;| + freebsd*|darwin*|dragonfly*) + args+=( + '(-a -j -f -l -G -g -u -d -m -L 1 *)-C[list interface cloners]' + '(-l -C)-m[list supported media]' + '(-l -C)-L[show address lifetime as time offset]' + '(-C)-v[get more verbose status for an interface]' + ) + ;| + freebsd<14->.*) + args+=( '(-C)-j+[perform actions inside jail]:jail:_jails' ) + ;; dragonfly*) args+=( '-n[disable auto-loading of kernel network interface driver]' ) ;; diff --git a/Completion/Unix/Command/_imagemagick b/Completion/Unix/Command/_imagemagick index b7671fe49..6553868d9 100644 --- a/Completion/Unix/Command/_imagemagick +++ b/Completion/Unix/Command/_imagemagick @@ -12,7 +12,7 @@ typeset -A opt_args # # and certainly many other things... -formats=(jpg jpeg jp2 j2k jpc jpx jpf tif tiff miff ras bmp cgm dcx ps eps fig fits fpx gif mpeg pbm pgm ppm pcd pcl pdf pcx png rad rgb rgba rle sgi html shtml tga ttf uil xcf xwd xbm xpm yuv) +formats=(jpg jpeg jp2 j2k jpc jpx jpf tif tiff miff ras bmp cgm dcx ps eps fig fits fpx gif mpeg pbm pgm ppm pcd pcl pdf pcx png rad rgb rgba rle sgi html shtml tga ttf uil xcf xwd xbm xpm yuv svg webp) if (( $# )); then _files "$@" -g "*.(#i)(${(j:|:)formats})(-.)" diff --git a/Completion/Unix/Command/_install b/Completion/Unix/Command/_install index 364119961..881c99620 100644 --- a/Completion/Unix/Command/_install +++ b/Completion/Unix/Command/_install @@ -25,8 +25,9 @@ if _pick_variant gnu='Free Soft' unix --version; then args+=( $common_args '(-b --backup)--backup=[create backup; optionally specify method]:: :->controls' - "${lx}--context=-[like -Z, or specify SELinux security context to set]::SELinux security context:_selinux_contexts" + "${lx}--context=-[like -Z, or specify SELinux security context to set]::SELinux security context:_selinux_contexts -a file_type" '-D[create all leading destination path components]' + '--debug[explain how a file is copied. Implies -v]' '(: -)--help[display help information]' "${lx}--preserve-context[preserve SELinux security context]" '--strip-program=[specify program used to strip binaries]:strip program:_files' diff --git a/Completion/Unix/Command/_iostat b/Completion/Unix/Command/_iostat index 1152b0d8b..d3943fcb4 100644 --- a/Completion/Unix/Command/_iostat +++ b/Completion/Unix/Command/_iostat @@ -34,7 +34,6 @@ case $OSTYPE:l in args+=( '-x[show extended disk statistics]' '-z[omit lines for devices with no activity]' - '(* -)-?[display a usage statement and exit]' ) ;; dragonfly*) @@ -126,6 +125,7 @@ case $OSTYPE:l in parser=( -s ) args=( '-c[display CPU utilization report]' + "--compact[don't break into sub-reports keeping metrics to a single line]" '-d[display device utilization report]' '--dec=-[specify the number of decimal places to use]:decimal places [2]:(0 1 2)' '-f[specify alternative directory to read device statistics from]:directory:_directories' diff --git a/Completion/Unix/Command/_java b/Completion/Unix/Command/_java index ff6e82645..325413d87 100644 --- a/Completion/Unix/Command/_java +++ b/Completion/Unix/Command/_java @@ -82,7 +82,10 @@ java) '(- 1)-X-[non-standard java option]:option' \ '(- 1)-jar[specify a program encapsulated as jar]:jar:_files -g \*.jar\(-.\)' \ '-splash\:-[show splash screen with specified image]:image:_files' \ - '(-):class:_java_class -m main ${(kv)opt_args[(i)(-classpath|-cp)]}' \ + '--source=[set the version of the source in source-file mode]:version' \ + '(-):arg: _alternative + "classes\:class\:{ (( ! $+opt_args[--source] )) && _java_class -m main ${(kv)opt_args[(i)(-classpath|-cp)]} }" + "files\:source file\:_files -g \*.java\(-.\)"' \ '*::args:= _normal' \ && return 0 ;; @@ -438,8 +441,8 @@ classpath|sourcepath|bootstrapclasspath|docletpath) compset -P '*:' compset -S ':*' _alternative \ - "classpath:$state:_path_files -qS: -g '*.(jar|zip)(-.)'" \ - "classpath:$state:_path_files -r': ' -/" && return + "classpath:${state}:_path_files -qS: -g '*.(jar|zip)(-.)'" \ + "classpath:${state}:_path_files -r': ' -/" && return ;; extdirs) diff --git a/Completion/Unix/Command/_ldd b/Completion/Unix/Command/_ldd index 3c7b088df..98ac41e14 100644 --- a/Completion/Unix/Command/_ldd +++ b/Completion/Unix/Command/_ldd @@ -30,8 +30,7 @@ else freebsd*) args=( '-a[show all objects that are needed by each loaded object]' - '-v[verbose listing of the dynamic linking headers]' - '-f+[specify format]:format:((%a\:program\ name %A\:environment\ name %o\:library\ name %p\:path\ to\ library %x\:load\ address))' + '*-f+[specify format]:format:((%a\:program\ name %A\:environment\ name %o\:library\ name %p\:path\ to\ library %x\:load\ address))' ) ;; esac diff --git a/Completion/Unix/Command/_less b/Completion/Unix/Command/_less index 69f75fd0e..8772f5771 100644 --- a/Completion/Unix/Command/_less +++ b/Completion/Unix/Command/_less @@ -56,7 +56,7 @@ _arguments -S -s -A "[-+]*" \ '(-L --no-lessopen)'{-L,--no-lessopen}'[ignore the LESSOPEN environment variable]' \ '(-M --LONG-PROMPT -m --long-prompt)'{-m,--long-prompt}'[prompt verbosely]' \ '(-m --long-prompt -M --LONG-PROMPT)'{-M,--LONG-PROMPT}'[prompt very verbosely]' \ - '(-N --LINE-NUMBERS -n --line-numbers)'{-n,--line-numbers}"[don't keep track of line numbers]" \ + '(-N --LINE-NUMBERS -n --line-numbers)'{-n,--line-numbers}'[suppress line numbers in prompts and messages]' \ '(-n --line-numbers -N --LINE-NUMBERS)'{-N,--LINE-NUMBERS}'[show line numbers]' \ '(* -O --LOG-FILE -o --log-file)'{-o+,--log-file=}'[copy input to file]:file:_files' \ '(* -o --log-file -O --LOG-FILE)'{-O+,--LOG-FILE=}'[copy input to file, overwriting if necessary]:file:_files' \ @@ -83,18 +83,39 @@ _arguments -S -s -A "[-+]*" \ '(-\" --quotes)'{'-\"+',--quotes=}'[change quoting character]:quoting characters' \ '(-~ --tilde)'{-~,--tilde}"[don't display tildes after end of file]" \ '(-\# --shift)'{'-\#+',--shift=}"[specify amount to move when scrolling horizontally]:number" \ + '--exit-follow-on-close[exit F command on a pipe when writer closes pipe]' \ '--file-size[automatically determine the size of the input file]' \ + '--header=[set header size]:lines,columns' \ '--incsearch[search file as each pattern character is typed in]' \ + '--intr=[specify interrupt character instead of ^X]:char [^X]' \ '--line-num-width=[set the width of line number field]:width [7]' \ + '--modelines=[look for vim modelines]:lines to search' \ '--follow-name[the F command changes file if the input file is renamed]' \ '--mouse[enable mouse input]' \ '--no-histdups[remove duplicates from command history]' \ + "--no-number-headers[don't give line numbers to header lines]" \ + "--no-search-headers[don't search in header lines or columns]" \ + "--no-vbell[disable the terminal's visual bell]" \ + '--redraw-on-quit[redraw final screen when quitting]' \ '--rscroll=[set the character used to mark truncated lines]:character [>]' \ '--save-marks[retain marks across invocations of less]' \ + '--search-options=[set default options for every search]: : _values -s "" + "search option" + "E[multi-file]" "F[from first line]" "K[highlight]" + "N[non-matching]" "R[literal]" "W[wrap]" -' \ + '--show-preproc-errors[display a message if preprocessor exits with an error status]' \ + '--proc-backspace[process backspaces for bold/underline]' \ + '--SPECIAL-BACKSPACE[treat backspaces as control characters]' \ + '--proc-return[delete carriage returns before newline]' \ + '--SPECIAL-RETURN[treat carriage returns as control characters]' \ + '--proc-tab[expand tabs to spaces]' \ + '--SPECIAL-TAB[treat tabs as control characters]' \ '--status-col-width=[set the width of the -J status column]:width [2]' \ + '--status-line[highlight or color the entire line containing a mark]' \ '--use-backslash[subsequent options use backslash as escape char]' \ '--use-color[enable colored text]' \ '--wheel-lines=[specify lines to move for each click of the mouse wheel]:lines' \ + '--wordwrap[wrap lines at spaces]' \ "$files[@]" && ret=0 diff --git a/Completion/Unix/Command/_libvirt b/Completion/Unix/Command/_libvirt index a3ab5a68a..bd605b9c9 100644 --- a/Completion/Unix/Command/_libvirt +++ b/Completion/Unix/Command/_libvirt @@ -20,7 +20,6 @@ typeset -A dom_opts dom_opts=( console " " destroy " " - edit " " managedsave " " reboot " " reset " " diff --git a/Completion/Unix/Command/_ln b/Completion/Unix/Command/_ln index 9d5efcabb..7bd2f7f27 100644 --- a/Completion/Unix/Command/_ln +++ b/Completion/Unix/Command/_ln @@ -45,9 +45,11 @@ case $variant; in {-h,-n}'[do not dereference destination]' '(-f)-i[prompt before removing destination files]') ;; - darwin*|dragonfly*|freebsd*|netbsd*|openbsd*) + darwin*|dragonfly*|*bsd*) args+=( - {-h,-n}'[do not dereference destination]' + {-h,-n}"[don't dereference destination]" + '(-L)-P[create hard links directly to symbolic links]' + '(-P)-L[create hard links to symbolic link references]' ) ;| darwin*|dragonfly*|freebsd*|netbsd*) @@ -57,12 +59,6 @@ case $variant; in '-v[print name of each linked file]' ) ;| - dragonfly*|freebsd*|netbsd*|openbsd*) - args+=( - '(-L)-P[create hard links directly to symbolic links]' - '(-P)-L[create hard links to symbolic link references]' - ) - ;| dragonfly*|freebsd*|netbsd*) args+=( "-w[warn if source of a symbolic link doesn't currently exist]" diff --git a/Completion/Unix/Command/_ls b/Completion/Unix/Command/_ls index df14e7e2c..392b8490b 100644 --- a/Completion/Unix/Command/_ls +++ b/Completion/Unix/Command/_ls @@ -75,12 +75,12 @@ if ! _pick_variant gnu=gnu unix --help; then if [[ $OSTYPE = (dragonfly*|freebsd*|darwin*) ]]; then arguments+=( '-G[enable colorized output]' + '(-A)-I[prevent -A from being automatically set for the super-user]' '-P[do not follow symlinks]' ) fi if [[ $OSTYPE = (dragonfly*|freebsd*) ]]; then arguments+=( - '(-A)-I[prevent -A from being automatically set for the super-user]' '(-1 -C -m -x)-D+[specify format for date]:format: _date_formats' ) fi @@ -91,16 +91,19 @@ if ! _pick_variant gnu=gnu unix --help; then ) fi if [[ $OSTYPE = (freebsd*|darwin*) ]]; then - arguments+=( '(-c -u)-U[file creation time]' ) - fi - if [[ $OSTYPE = freebsd* ]]; then arguments+=( '-,[print file sizes grouped and separated by thousands]' + '(-c -u)-U[file creation time]' '-y[with -t, sort filenames in the same order as the time]' - '-Z[display MAC label]' '--color=-[control use of color]:color:(never always auto)' ) fi + if [[ $OSTYPE = freebsd* ]]; then + arguments+=( + '(-S -f -t -U)-v[sort by version (filename treated numerically)]' + '-Z[display MAC label]' + ) + fi if [[ $OSTYPE = darwin* ]]; then arguments+=( '-@[display extended attribute keys and sizes in long listing]' @@ -108,6 +111,7 @@ if ! _pick_variant gnu=gnu unix --help; then '(-l -1 -C -m -x)-o[long listing but without group information]' '-O[display file flags]' '-v[print raw characters]' + '-%[distinguish dataless files and directories with a %]' ) fi if [[ $OSTYPE = solaris* ]]; then @@ -139,8 +143,8 @@ else '(--recursive -R)'{--recursive,-R}'[list subdirectories recursively]' '(--no-group -G)'{--no-group,-G}'[inhibit display of group information]' - '(--block-size --human-readable -h --si --kilobytes -k)'{--human-readable,-h}'[print sizes in human readable form]' - '(--block-size --human-readable -h --si --kilobytes -k)--si[sizes in human readable form; powers of 1000]' + '(--block-size --human-readable -h --si --kibibytes -k)'{--human-readable,-h}'[print sizes in human readable form]' + '(--block-size --human-readable -h --si --kibibytes -k)--si[sizes in human readable form; powers of 1000]' '(--inode -i)'{--inode,-i}'[print file inode numbers]' '(--format -l -g -o -1 -C -m -x)-l[long listing]' @@ -148,40 +152,41 @@ else --group-directories-first '(--format -l --no-group -G -1 -C -m -x)-o[no group, long]' '(--format -l -g -o -C -m -x)-1[single column output]' - '(--format -l -g -o -1 -m -x)-C[list entries in columns sorted vertically]' - '(--format -l -g -o -1 -C -x)-m[comma separated]' - '(--format -l -g -o -1 -C -m)-x[sort horizontally]' + '(--format -l -g -o -1 -m -x --block-size --human-readable -h --si --kibibytes -k)-C[list entries in columns sorted vertically]' + '(--format -l -g -o -1 -C -x --block-size --human-readable -h --si --kibibytes -k)-m[comma separated]' + '(--format -l -g -o -1 -C -m --block-size --human-readable -h --si --kibibytes -k)-x[sort horizontally]' '(-l -g -o -1 -C -m -x)--format=[specify output format]:format:(verbose long commas horizontal across vertical single-column)' '(--size -s -f)'{--size,-s}'[display size of each file in blocks]' '(--time -u)-c[status change time]' '(--time -c)-u[access time]' - '(-c -u)--time=[specify time to show]:time:(ctime status use atime access)' + '(-c -u)--time=[specify time to show]:time:(ctime status use atime access birth creation)' '--time-style=[show times using specified style]:style: _alternative "time-styles\:time style\:(full-iso long-iso iso locale)" $datef' '(-a --all -U -l --format -s --size -t --sort --full-time)-f[unsorted, all, short list]' '(--reverse -r -U -f)'{--reverse,-r}'[reverse sort order]' - '(--sort -t -U -v -X)-S[sort by size]' - '(--sort -S -U -v -X)-t[sort by modification time]' - '(--sort -S -t -v -X)-U[unsorted]' - '(--sort -S -t -U -X)-v[sort by version (filename treated numerically)]' - '(--sort -S -t -U -v)-X[sort by extension]' - '(-S -t -U -v -X)--sort=[specify sort key]:sort key:(size time none version extension)' + '(--sort -f -t -U -v -X)-S[sort by size]' + '(--sort -f -S -U -v -X)-t[sort by modification time]' + '(--sort -f -S -t -v -X)-U[unsorted]' + '(--sort -f -S -t -U -X)-v[sort by version (filename treated numerically)]' + '(--sort -f -S -t -U -v)-X[sort by extension]' + '(-S -f -t -U -v -X)--sort=[specify sort key]:sort key:(size time none version extension)' '--color=-[control use of color]:color:(never always auto)' "*--hide=[like -I, but overridden by -a or -A]:pattern: " '--hyperlink=[output terminal codes to link files using file::// URI]::when:(none auto always)' - '(--classify -F --indicator-style -p --file-type)'{--classify,-F}'[append file type indicators]' + '(--classify -F --indicator-style -p --file-type)-F[append file type indicators]' + '(--classify -F --indicator-style -p --file-type)--classify=-[append file type indicators]::when [always]:(none auto always)' '(--file-type -p --indicator-style -F --classify)--file-type[append file type indicators except *]' '(--file-type -p --indicator-style -F --classify)-p[append / to directories]' '(-F --classify -p --file-type)--indicator-style=[specify indicator style]:indicator style:(none file-type classify slash)' '(-f)--full-time[list both full date and full time]' - '(--block-size --human-readable -h --si --kilobytes -k)'{--kilobytes,-k}'[use block size of 1k]' - '(--human-readable -h --si --kilobytes -k)--block-size=[specify block size]:block size (bytes):(K M G T P E Z Y KB MB TB PB EB ZB YB)' + '(--block-size --human-readable -h --si --kibibytes -k)'{--kibibytes,-k}'[use block size of 1k]' + '(--human-readable -h --si --kibibytes -k -C -x)--block-size=[specify block size]:block size (bytes):(K M G T P E Z Y KB MB TB PB EB ZB YB)' '(--numeric-uid-gid -n)'{--numeric-uid-gid,-n}'[numeric uid, gid]' '(--tabsize -T)'{--tabsize=,-T+}'[specify tab size]:tab size' @@ -194,6 +199,7 @@ else '(--hide-control-chars -q --show-control-chars)'{--hide-control-chars,-q}'[hide control chars]' '(-q --hide-control-chars)--show-control-chars' + '--zero[end each output line with NUL, not newline]' '(- :)--help[display help information]' '(- :)--version[display version information]' '*:file:_files' diff --git a/Completion/Unix/Command/_lsof b/Completion/Unix/Command/_lsof index 8afb55e1d..60f59a589 100644 --- a/Completion/Unix/Command/_lsof +++ b/Completion/Unix/Command/_lsof @@ -9,6 +9,7 @@ case $OSTYPE in '-E[display endpoint info for pipes, sockets and pseudoterminal files but not files of the endpoints]' '+E[display endpoint info for pipes, sockets and pseudoterminal files including files of the endpoints]' '-X[skip reporting of info on network connections]' + '*-Z[display or filter by SELinux security context]::context pattern:_selinux_contexts -a domain' ) ;; solaris*) @@ -23,7 +24,6 @@ _arguments -C -s -S $args \ '(-)'{-\?,-h}'[list help]' \ '-a[AND selections]' \ '-b[avoid kernel blocks]' \ - '-C[disable reporting of path name components]' \ '+c[truncate command name to specified characters]:characters' \ '-c[list files with specified command name beginning]:command name' \ '+d[search for open instances for contents of specified dir]:search directory:_files -/' \ @@ -31,16 +31,19 @@ _arguments -C -s -S $args \ '+D[recursively search from specified dir]:search directory:_files -/' \ '-D[direct use of device cache file]:function:((\?\:report\ device\ cache\ file\ paths b\:build\ the\ device\ cache\ file i\:ignore\ the\ device\ cache\ file r\:read\ the\ device\ cache\ file u\:read\ and\ update\ the\ device\ cache\ file))' \ '*-+e[exempt filesystem from blocking kernel calls]:file system:_directories' \ + '-+E[show endpoint information for pipes, sockets, ptys, mqueues and eventfds; with -E, omit endpoint files]' \ '-f[inhibit listing of kernel file structure info]::info type:->file-structures' \ '+f[enable listing of kernel file structure info]::info type:->file-structures' \ '-F[select output fields]:fields:->fields' \ '-g[select by process group id]::process group id:_sequence -s , _pgids' \ + '-H[print human readable sizes]' \ '(*)*-i[select internet files]::address:->addresses' \ '-K+[select listing of tasks of processes]::value:((i\:ignore\ tasks))' \ '-k[specify kernel name list file]:kernel file:_files' \ '-l[inhibit conversion of UIDs to user names]' \ '-L[list no link counts]' \ '+L[list all link counts]::max link count for listed files' \ + '+m[specify or write a mount supplement file]::mount supplement file:_files' \ '-m[specify kernel memory file]:kernel memory file:_files' \ '-M[disable reporting of portmapper registrations]' \ '+M[enable reporting of portmapper registrations]' \ @@ -49,6 +52,7 @@ _arguments -C -s -S $args \ '(-s)-o[list file offset]::digits for file offset' \ '-O[avoid overheads of bypassing potential blocking]' \ '-P[inhibit conversion of port numbers to port names]' \ + '-Q[ignore failed search terms]' \ '-p[list files for specified processes]:process ID:_sequence -s , _pids' \ '-r[repeat listing endlessly]::delay (seconds)' \ '+r[repeat listing until no files listed]::delay (seconds)' \ diff --git a/Completion/Unix/Command/_lua b/Completion/Unix/Command/_lua index 7254d3819..3a1ef4fd7 100644 --- a/Completion/Unix/Command/_lua +++ b/Completion/Unix/Command/_lua @@ -41,6 +41,7 @@ _lua() { _arguments -S -A '-*' : \ '*-e+[execute specified command string]:command string' \ '-E[ignore environment variables]' \ + '-W[turn warnings on]' \ '-i[enter interactive mode]' \ '*-l+[specify library or module to require]: :_lua_libraries' \ '-v[display version information]' \ diff --git a/Completion/Unix/Command/_make b/Completion/Unix/Command/_make index ae91440f0..99c786dc7 100644 --- a/Completion/Unix/Command/_make +++ b/Completion/Unix/Command/_make @@ -1,4 +1,4 @@ -#compdef make gmake pmake dmake freebsd-make bmake +#compdef make gmake gnumake pmake dmake freebsd-make bmake # TODO: Based on targets given on the command line, show only variables that # are used in those targets and their dependencies. @@ -118,10 +118,34 @@ _make-parseMakefile () { done } +_make-parseDataBase () { + local input var TAB=$'\t' IFS= skip=0 + + while read input + do + if [[ $skip = 1 ]]; then + skip=0 + continue + fi + case "$input " in + (\# Not a target*|\# environment*) + skip=1 # skip next line + ;; + ([[:alnum:]][[:alnum:]_]#[" "$TAB]#(\?|:|::|)=*) + var=${input%%[ $TAB]#(\?|:|::|)=*} + VARIABLES[$var]=1 + ;; + ([[*?[:alnum:]$][^$TAB:=%]#:[^=]*) + TARGETS+=( ${input%%:*} ) + ;; + esac + done +} + _make() { local prev="$words[CURRENT-1]" file expl tmp is_gnu incl match basedir nul=$'\0' - local context state state_descr line + local curcontext=$curcontext state state_descr line local -a option_specs local -A VARIABLES VAR_ARGS opt_args local -aU TARGETS keys @@ -152,26 +176,28 @@ _make() { '(-i --ignore-errors)'{-i,--ignore-errors}'[ignore errors from recipes]' '*'{-I,--include-dir=}'[search specified directory for included makefiles]:search path for included makefile:->dir' '(-j --jobs)'{-j+,--jobs=}'[allow specified number of parallel jobs; unlimited jobs with no arg]:: : _guard "[0-9]#" "number of jobs"' + '--jobserver-style=[select the style of jobserver to use]:style:(fifo pipe sem)' '(-k --keep-going)'{-k,--keep-going}"[keep going when some targets can't be made]" '(-l --load-average --max-load)'{-l,--load-average=,--max-load}"[don't start multiple jobs unless load is below specified value]:load" '(-L --check-symlink-times)'{-L,--check-symlink-times}'[use the latest mtime between symlinks and target]' '(-n --just-print --dry-run --recon)'{-n,--just-print,--dry-run,--recon}"[don't actually run any recipe; just print them]" '*'{-o,--old-file=,--assume-old=}"[consider specified file to be old and don't remake it]:file not to remake:->file" '(-O --output-sync)'{-O-,--output-sync=-}'[synchronize output of parallel jobs]::granularity for grouping output:compadd -E 0 none line target recurse' - '(-p --print-data-base)'{-p,--print-data-base}'[print makes internal database]' + '(-p --print-data-base)'{-p,--print-data-base}"[print make's internal database]" '(-q --question)'{-q,--question}'[run no recipe; exit status says if up to date]' '(-r --no-builtin-rules)'{-r,--no-builtin-rules}'[disable the built-in implicit rules]' + '--shuffle=-[perform shuffle of prerequisites and goals]::seed (integer) or mode:(random reverse none)' '(-R --no-builtin-variables)'{-R,--no-builtin-variables}'[disable the built-in variable settings]' '(-s --silent --quiet)'{-s,--silent,--quiet}"[don't echo recipes]" '--no-silent[echo recipes (disable --silent mode)]' '(-S --no-keep-going --stop)'{-S,--no-keep-going,--stop}'[turns off -k]' '(-t --touch)'{-t,--touch}'[touch targets instead of remaking them]' + '--trace[print tracing information]' '(- *)'{-v,--version}'[print the version number of make and exit]' '(-w --print-directory)'{-w,--print-directory}'[print the current directory]' '--no-print-directory[turn off -w, even if it was turned on implicitly]' '*'{-W,--what-if=,--new-file=,--assume-new=}'[consider specified file to be infinitely new]:file to treat as modified:->file' '--warn-undefined-variables[warn when an undefined variable is referenced]' - '--warn-undefined-functions[warn when an undefined user function is called]' ) else # Basic make options only. @@ -185,7 +211,7 @@ _make() { ) fi - _arguments -s $option_specs \ + _arguments -C -S -s $option_specs \ '*:make target:->target' && ret=0 [[ $state = cdir ]] && cdir=-2 @@ -214,6 +240,10 @@ _make() { ;; (target) + # target name starting with '-' is allowed only after '--' + if [[ $words[CURRENT] = -* ]] && (( ${words[(i)--]} > CURRENT )); then + return ret + fi file=${(v)opt_args[(I)(-f|--file|--makefile)]} if [[ -n $file ]] then @@ -239,7 +269,7 @@ _make() { if [[ $is_gnu == gnu ]] then if zstyle -t ":completion:${curcontext}:targets" call-command; then - _make-parseMakefile < <(_call_program targets "$words[1]" -nsp --no-print-directory -f "$file" --always-make 2> /dev/null) + _make-parseDataBase < <(_call_program targets "$words[1]" -nqp --no-print-directory -f "$file" .DEFAULT 2> /dev/null) else _make-parseMakefile < $file fi diff --git a/Completion/Unix/Command/_mktemp b/Completion/Unix/Command/_mktemp index 03fc89e36..0f66d744e 100644 --- a/Completion/Unix/Command/_mktemp +++ b/Completion/Unix/Command/_mktemp @@ -1,43 +1,45 @@ #compdef mktemp gmktemp local variant -local args +local -a args -_pick_variant -r variant busybox=BusyBox gnu='Free Soft' unix --version +_pick_variant -r variant busybox=BusyBox gnu='Free Soft' $OSTYPE --version args=( '(-d --directory)'{-d,--directory}'[make directory instead of file]' - '(: -)--help[display help information]' - '(-p --tmpdir)'{-p+,--tmpdir=}'[make relative to specified directory]: :_directories' '(-q --quiet)'{-q,--quiet}'[suppress error messages]' - '--suffix=[append specified suffix to template]:template suffix' - '-t[interpret template as single path component relative to temp dir]' '(-u --dry-run)'{-u,--dry-run}'[print file name only]' - '(: -)'{-V,--version}'[display version information]' - '1: :_guard "^-*" "template name"' ) -# Non-GNU variants don't support long options (except BusyBox's --help) -if [[ $variant == *busybox* ]]; then # See also: _busybox - args=( ${args:#((#s)|*\))(\*|)--^help*} ) -elif [[ $variant != gnu ]]; then - args=( ${args:#((#s)|*\))(\*|)--*} ) -fi - -[[ $variant == gnu ]] || { - # BusyBox, OpenBSD, and Solaris have -p, but -t doesn't take an argument - if [[ $variant == *busybox* ]] || [[ $OSTYPE == (openbsd|solaris)* ]]; then - args=( ${args:#((#s)|*\))(\*|)-t*} ) - args+=( '-t[generate template relative to temp dir]' ) - # Dragonfly, FreeBSD, and Darwin take an argument to -t and support any number - # of template files. These OSes do not have -p and -V. - else - args=( ${args:#((#s)|*\))(1:*|(\*|)-[ptV]*)} ) +case $variant in + ^(dragonfly|darwin)*) + args+=( '(-p --tmpdir)'{-p+,--tmpdir=}'[make relative to specified directory]: :_directories' ) + ;| + gnu) + args+=( + '--suffix=[append specified suffix to template]:template suffix' + '(: -)'{-V,--version}'[display version information]' + ) + ;| + # Most variants don't support long options (except BusyBox's --help) + ^(gnu|freebsd*)) + args=( ${args:#((#s)|*\))(\*|)--*} ) + ;| + gnu|*busybox*) + args+=( '(: -)--help[display help information]' ) + ;| + (gnu|*busybox|openbsd|solaris)*) + args+=( + '-t[generate template relative to temp dir]' + '1: :_guard "^-*" "template name"' + ) + ;; + (dragonfly|netbsd|freebsd|darwin)*) args+=( '-t[generate template relative to temp dir using specified prefix]:template prefix' '*: :_guard "^-*" "template name"' ) - fi -} + ;; +esac _arguments -s -S : $args diff --git a/Completion/Unix/Command/_mosh b/Completion/Unix/Command/_mosh index 7d1250320..6d0f746f8 100644 --- a/Completion/Unix/Command/_mosh +++ b/Completion/Unix/Command/_mosh @@ -7,7 +7,7 @@ _arguments -C \ '(-)--help[display help information]' \ '(-)--version[display version information]' \ "--no-init[don't set terminal init string]" \ - '--ssh=[specify ssh command to setup session]:ssh command:_normal' \ + '--ssh=[specify ssh command to setup session]:ssh command: _cmdstring' \ '--port=[specify server-side port range]:port:_sequence -n 2 -s \: _ports' \ '(-a -n)--predict=[control speculative local echo]:mode:(adaptive always never)' \ '(--predict -n)-a[synonym for --predict=always]' \ @@ -22,7 +22,7 @@ _arguments -C \ '--local[run mosh-server locally without using ssh]' \ '--experimental-remote-ip=[select method for discovering remote IP address to use for mosh]:method:(local remote proxy)' \ '1:remote host name:->userhost' \ - '*:::args:_normal' && ret=0 + '*::: : _normal -p $service' && ret=0 case $state in userhost) diff --git a/Completion/Unix/Command/_mount b/Completion/Unix/Command/_mount index 301b9e58e..bf75aa118 100644 --- a/Completion/Unix/Command/_mount +++ b/Completion/Unix/Command/_mount @@ -40,12 +40,13 @@ fi # are below these table. local curcontext="$curcontext" state line expl suf ret=1 -local args deffs=iso9660 tmp typeops=-t _nfs_access _fs_nfs _nfs_ufs \ +local deffs=iso9660 tmp typeops=-t _nfs_access _fs_nfs _nfs_ufs \ _fs_ufs _fs_efs _fs_cd9660 _fs_iso9660 _fs_cachefs _fs_s5fs _fs_tmpfs _fs_pcfs \ _fs_hsfs _fs_advfs _fs_cdfs _fs_affs _fs_ext2 _fs_fat _fs_ext3 _fs_msdos \ _fs_msdosfs _fs_umsdos _fs_vfat _fs_hpfs _fs_ntfs _fs_reiserfs _fs_smbfs \ _fs_xfs _fs_std _fs_devfs _fs_fdesc _fs_kernfs _fs_linprocfs _fs_linsysfs \ _fs_procfs _fs_btrfs _fs_ext4 +local -a args typeset -A opt_args @@ -333,9 +334,9 @@ if (( ! $+_fs_any )); then 'keybits[set number of bits in encryption key]:key size:(64 128 160 192 256)' 'offset[specify data start for loopback mount]:offset (bytes)' '(loud)silent' '(silent)loud' - '(fscontext defcontext)context:context' - '(context)'{fscontext,defcontext}':context' - 'rootcontext:context' + '(fscontext defcontext)context:context:_selinux_contexts -a file_type' + '(context)'{fscontext,defcontext}':context:_selinux_contexts -a file_type' + 'rootcontext:context:_selinux_contexts -a file_type' ) _fs_adfs=( 'uid[set owner of root]:user ID' @@ -735,8 +736,11 @@ if [[ "$service" = mount ]]; then deffs=hsfs typeops=-F ;; + darwin*) + args=( '-k[follow no symlinks in the provided mount-on directory]' ) + ;& freebsd*|dragonfly*|darwin*) - args=( -s + args=( -s $args '(:)-a[mount all filesystems in fstab]' '-d[cause everything to be done except for the actual system call]' '-f[forced mount]' diff --git a/Completion/Unix/Command/_mpc b/Completion/Unix/Command/_mpc index 7f7adc7b4..c3f93878c 100644 --- a/Completion/Unix/Command/_mpc +++ b/Completion/Unix/Command/_mpc @@ -26,6 +26,7 @@ _mpc_command() { mpc_cmds=( add:"append a song to the end of the current playlist" + albumart:"download album art for the given song and write to stdout" cdprev:"compact disk player-like previous command" channels:"list the channels that other clients have subscribed to" clear:"clear the current playlist" @@ -57,6 +58,7 @@ _mpc_command() { prio:"change song priorities in the queue" queued:"show the next queued song" random:"toggle random mode, or specify state" + readpicture:"download a picture from the given song and write to stdout" repeat:"toggle repeat mode, or specify state" single:"toggle single mode, or specify state" consume:"toggle consume mode, or specify state" @@ -205,6 +207,10 @@ _mpc_add() { _mpc_helper_files } +_mpc_albumart() { + _mpc_helper_files +} + _mpc_del() { _mpc_helper_songnumbers } @@ -304,8 +310,14 @@ _mpc_random() { _mpc_helper_bool } +_mpc_readpicture() { + _mpc_helper_files +} + _mpc_single() { - _mpc_helper_bool + local state + _description states expl state + compadd "$@" "$expl[@]" on once off } _mpc_consume() { diff --git a/Completion/Unix/Command/_mutt b/Completion/Unix/Command/_mutt index 67b974a8d..82a6e5fa9 100644 --- a/Completion/Unix/Command/_mutt +++ b/Completion/Unix/Command/_mutt @@ -1,14 +1,15 @@ -#compdef mutt +#compdef mutt neomutt -_arguments -s -S \ +# should pass -S but that doesn't work with -- ending -a +_arguments -s \ '::recipient:_email_addresses -n mutt' \ '(- :)-A[expand given alias]:alias:_email_addresses -n mutt' \ - '*-a[attach file using MIME]::file attachment:_files' \ + '*-a[attach file using MIME]:*--:file attachment:_files' \ '*-b[specify a BCC recipient]:BCC recipient:_email_addresses -n mutt' \ '*-c[specify a CC recipient]:CC recipient:_email_addresses -n mutt' \ '(- :)-D[print the value of all variables]' \ '(-x)-E[edit the draft (-H) or include (-i) file]' \ - '-d+[log debugging output to ~/.muttdebug0]:level:(1 2 3 4 5)' \ + '-d+[log debugging output to ~/.muttdebug0]:level:(-5 -4 -3 -2 -1 0 1 2 3 4 5)' \ '-e+[specify a post-init configuration command]:post-init configuration' \ '-f+[specify mailbox to load]:mailbox: _mailboxes' \ '-F+[specify an init file]:init file:_files' \ diff --git a/Completion/Unix/Command/_mv b/Completion/Unix/Command/_mv index 84e43d47e..c52e7a5e4 100644 --- a/Completion/Unix/Command/_mv +++ b/Completion/Unix/Command/_mv @@ -13,13 +13,17 @@ case $variant; in {existing,nil}"[numbered backups, if they already exist]" {simple,never}"[always make simple backups]"' '(-b --backup -n --no-clobber)-b[make a backup of each existing destination file]' + '(-v)--debug[explain how a file is copied]' '(-f --force -i --interactive -n --no-clobber)'{-f,--force}"[don't prompt before overwriting]" '(-f --force -i --interactive -n --no-clobber)'{-i,--interactive}'[prompt before overwriting existing file]' + '(-f --force -i --interactive -n --no-clobber)'{-n,--no-clobber}"[don't overwrite existing file]" + "--no-copy[don't copy if renaming fails]" '--strip-trailing-slashes[remove any trailing slashes from each source argument]' '(-S --suffix)'{-S+,--suffix=}'[specify the backup suffix]:backup suffix [~]' '(-t --target-directory)'{-t+,--target-directory=}'[move all source arguments into specified directory]:directory:_directories' '(-T --no-target-directory)'{-T,--no-target-directory}'[treat final argument as a normal file]' - '(-u --update)'{-u,--update}'[move only when destination file is older or missing]' + '(-u)--update=-[move only when destination file is older or missing]::update files [older]:(all none older)' + '(--update)-u[move only when destination file is older or missing]' '(-v --verbose)'{-v,--verbose}'[show file names after they are moved]' '(- *)--help[display usage information]' '(- *)--version[display version information]' @@ -37,6 +41,7 @@ case $variant; in darwin*|dragonfly*|freebsd*) args+=( "(-f -i)-n[don't overwrite existing file]" + "-h[if target is a symlink to a directory, don't follow it]" ) ;| darwin*|dragonfly*|*bsd*) @@ -44,11 +49,6 @@ case $variant; in '-v[show file names after they are moved]' ) ;| - dragonfly*|freebsd*) - args+=( - "-h[if target is a symlink to a directory, don't follow it]" - ) - ;; esac _arguments -s -S $aopts $args \ diff --git a/Completion/Unix/Command/_mysql_utils b/Completion/Unix/Command/_mysql_utils index 9f70687b0..2f5fd3efe 100644 --- a/Completion/Unix/Command/_mysql_utils +++ b/Completion/Unix/Command/_mysql_utils @@ -210,6 +210,7 @@ _mysql_utils() { "--no-defaults[don't read default options from any options file]" '--defaults-file=[read defaults from the given file]:file:_files' '--defaults-extra-file=[read specified file after the global files]:defaults file:_files' + '--protocol=[connection protocol to use for connecting to the server]:protocol:(tcp socket pipe memory)' '(-S --socket)'{-S+,--socket=}'[specify socket file to use for connection]:server socket file:_files' '(-h --host)'{-h+,--host=}'[specify server hostname]:hostname:_mysql_hosts' '(-P --port)'{-P+,--port=}'[specify port number for connection]:server port:_mysql_ports' diff --git a/Completion/Unix/Command/_netstat b/Completion/Unix/Command/_netstat index 67133dc6c..35d639f99 100644 --- a/Completion/Unix/Command/_netstat +++ b/Completion/Unix/Command/_netstat @@ -280,7 +280,6 @@ case $OSTYPE in '-c+[show specified number of updates, then exit]:count' '-e[show only the number of errors on the interface]' '-q[only show interfaces that have seen packets]' - '-t[show current value of the watchdog timer function]' ) statistics+=( $popt '-r[display routing statistics]' ) groups+=( -n$nopt ) @@ -303,6 +302,9 @@ case $OSTYPE in memory+=( $Xopt) statistics+=( $Xopt ) pcb+=( $Mopts $popt ) ;; + freebsd<14->.*) + args+=( '-j+[run inside a jail]:jail:_jails' ) + ;& freebsd<13->.*) sockets+=( '-c[show TCP stack used for each session]' diff --git a/Completion/Unix/Command/_nice b/Completion/Unix/Command/_nice index 29070697f..b52e5216a 100644 --- a/Completion/Unix/Command/_nice +++ b/Completion/Unix/Command/_nice @@ -1,14 +1,23 @@ #compdef nice -shift words -(( CURRENT-- )) +local -a specs=( '*:: : _normal -p $service' ) -if [[ $CURRENT -gt 1 && $words[1] = ([-+](-|)|-n)<-> ]]; then - shift words - (( CURRENT -- )) -elif [[ $CURRENT -gt 2 && $words[1] = -n ]]; then - shift 2 words - (( CURRENT -= 2 )) +# See if the 1st arg is such as -10 --10 or -+10 +if [[ $words[2] = -(-|+|)[0-9]## ]]; then + if (( $CURRENT == 2 )); then + _message 'niceness increment' && return + fi + compset -n 2 # Ignore the 1st arg +else + if _pick_variant gnu=GNU unix --version; then + specs+=( + '(-)'{-n+,--adjustment=}'[adjust niceness]:niceness increment' + '(* -)--help[display help and exit]' + '(* -)--version[output version information and exit]' + ) + else + specs+=( '-n+[specify increment of niceness]:niceness increment' ) + fi fi -_normal +_arguments : $specs diff --git a/Completion/Unix/Command/_nkf b/Completion/Unix/Command/_nkf index 0c4f06fb5..ae79e745a 100644 --- a/Completion/Unix/Command/_nkf +++ b/Completion/Unix/Command/_nkf @@ -10,8 +10,8 @@ _arguments -s \ '(-u)-b[Output is buffered]' \ '(-b)-u[Output is unbuffered]' \ '($outputs)'{-j,--jis}'[Output is JIS 7 bit]' \ - '($outputs)'{-e,--sjis}'[Output is Shift JIS]' \ - '($outputs)'{-s,--euc}'[Output is EUC-JP]' \ + '($outputs)'{-s,--sjis}'[Output is Shift JIS]' \ + '($outputs)'{-e,--euc}'[Output is EUC-JP]' \ '($outputs)'{-w,--utf8}'[Output is UTF-8 (No BOM)]' \ '($outputs)-w8[Output is UTF-8 (BOM)]' \ '($outputs)'{-w16,-w16b0,--utf16}'[Output is UTF-16 (BigEndian; No BOM)]' \ @@ -23,8 +23,8 @@ _arguments -s \ '($outputs)--mac[Output is for Mac]' \ '($outputs)--windows[Output is for Windows]' \ '($inputs)-J[Input assumption is JIS 7 bit]' \ - '($inputs)-E[Input assumption is Shift JIS]' \ - '($inputs)-S[Input assumption is EUC-JP]' \ + '($inputs)-S[Input assumption is Shift JIS]' \ + '($inputs)-E[Input assumption is EUC-JP]' \ '($inputs)-W[Input assumption is UTF-8 (No BOM)]' \ '($inputs)-W8[Input assumption is UTF-8 (BOM)]' \ '($inputs)-W16[Input assumption is UTF-16 (BigEndian; No BOM)]' \ diff --git a/Completion/Unix/Command/_nm b/Completion/Unix/Command/_nm index 888f1ef87..a78eb7068 100644 --- a/Completion/Unix/Command/_nm +++ b/Completion/Unix/Command/_nm @@ -17,9 +17,8 @@ if _pick_variant -r variant binutils=GNU elftoolchain=elftoolchain elfutils=elfu '(- *)'{-V,--version}'[display version information]' '(-f --format -P --portability)-B[same as --format=bsd]' '(-u --undefined-only)--defined-only[display only defined symbols]' - '(-f --format -P)--format=[specify output format]:format:(bsd sysv posix)' '(-n --numeric-sort -p --no-sort --size-sort -v)'{-n,--numeric-sort}'[sort symbols numerically by address]' - '(-p --no-sort -n -v --numeric-sort -r --reverse-sort --size-sort)'{-p,--no-sort}'[do not sort symbols]' + '(-p --no-sort -n -v --numeric-sort -r --reverse-sort --size-sort)'{-p,--no-sort}"[don't sort symbols]" '(-P --portability -B -f --format)'{-P,--portability}'[same as --format=posix]' '(-r --reverse-sort -p --no-sort)'{-r,--reverse-sort}'[reverse sort order]' '(-u --undefined-only --defined-only)'{-u,--undefined-only}'[display only undefined symbols]' @@ -41,7 +40,7 @@ if _pick_variant -r variant binutils=GNU elftoolchain=elftoolchain elfutils=elfu args=( ${args:#*(-C|-o|--portability)\[*} '(-C --demangle)'{-C,--demangle=-}'[decode symbol names]::style:(auto gnu-v2 gnu-v3 arm)' '(-g --extern-only)-e[only display global and static symbols]' - '(--format -P)-F+[specify output format]:format:(bsd sysv posix)' + '(-B --format -P)'{-F,--format}'[specify output format]:format:(bsd sysv posix)' '-o[with -P, same as -t o; otherwise same as -A]' '(-t --radix)-x[print values in hexadecimal]' ) @@ -51,7 +50,7 @@ if _pick_variant -r variant binutils=GNU elftoolchain=elftoolchain elfutils=elfu '--mark-special[mark special symbols]' '--color=[use color in output]:color:(always auto never)' '(-C)--demangle[decode symbol names]' - '(--format -P)-f+[specify output format]:format:(bsd sysv posix)' + '(-B -f --format -P --portability)'{-f,--format}'[specify output format]:format:(bsd sysv posix)' '(- *)--usage[give a short usage message]' '(- *)-?[display help information]' ) @@ -61,14 +60,19 @@ if _pick_variant -r variant binutils=GNU elftoolchain=elftoolchain elfutils=elfu args+=( '!(--no-recurse-limit)--recurse-limit' '--no-recurse-limit[disable demangling recursion limit]' - '(-f --format -P)-f+[specify output format]:format:(bsd sysv posix)' - '(-C --no-demangle)--demangle=-[decode symbol names]::style [auto]:(auto gnu lucid arm hp edg gnu-v3 java gnat rust dlang)' + '(-f --format -P -j --just-symbols)'{-f+,--format=}'[specify output format]:format [bsd]:(bsd sysv posix just-symbols)' + '(-C --no-demangle)--demangle=-[decode symbol names]::style [auto]:(none auto gnu-v3 java gnat dlang rust)' '--ifunc-chars=[specify characters to use for indirect function symbols]:characters for global/local indirect function symbols [ii]' + '(-B -f --format -P --portability -j --just-symbols)'{-j,--just-symbols}'[same as --format=just-symbols]' '--plugin[load specified plugin]:plugin' + '--quiet[suppress no "no symbols" diagnostic]' '--special-syms[include special symbols in the output]' '--synthetic[display synthetic symbols as well]' "--target=[target object format]:target:(${${(@M)${(f)$(_call_program targets nm --help)}:#*supported targets:*}##*: })" + '--unicode=[specify how to treat UTF-8 encoded unicode characters]:how_to_treat:(default show invalid hex escape highlight)' + '(-W --no-weak)'{-W,--no-weak}'[ignore weak symbols]' '--with-symbol-versions[display version strings after symbol names]' + '--without-symbol-versions[not display of symbol version information]' ) ;; esac diff --git a/Completion/Unix/Command/_objdump b/Completion/Unix/Command/_objdump index e2dde7e4c..94c01eb83 100644 --- a/Completion/Unix/Command/_objdump +++ b/Completion/Unix/Command/_objdump @@ -38,8 +38,10 @@ case $variant in '*-W-[display DWARF info in the file]::dwarf section:->short-dwarf-names' '*--dwarf=-[display DWARF info in the file]::dwarf section:->dwarf-names' + '(-L --process-links)'{-L,--process-links}'[display the contents of non-debug sections in separate debuginfo files]' - '--ctf=[display compact C type format info for section]:section' + '--ctf=-[display compact C type format info for section]::section' + '--sframe=-[display SFrame info from section]::section name [.sframe]' '(-t --syms)'{-t,--syms}'[display the contents of the symbol table(s)]' '(-T --dynamic-syms)'{-T,--dynamic-syms}'[display the contents of the dynamic symbol table]' '(-R --dynamic-reloc)'{-R,--dynamic-reloc}'[display the dynamic relocation entries in the file]' @@ -59,11 +61,13 @@ case $variant in \*{-I+,--include=}'[add directory to search list for source files]:directory:_files -/' '(-l --line-numbers)'{-l,--line-numbers}'[include line numbers and filenames in output]' '(-F --file-offsets)'{-F,--file-offsets}'[include file offsets when displaying information]' - '(-C --demangle)-C[decode mangled/processed symbol names]' - '(-C --demangle)--demangle=-[decode mangled/processed symbol names]::style:(auto gnu lucid arm hp edg gnu-v3 java gnat rust dlang)' + '(--demangle)-C[decode symbol names]' + '(-C)--demangle=-[decode symbol names]::style [auto]:(none auto gnu-v3 java gnat dlang rust)' '!(--no-recurse-limit)--recurse-limit' '--no-recurse-limit[disable demangling recursion limit]' '(-w --wide)'{-w,--wide}'[format output for more than 80 columns]' + '-U+[specify how to display unicode characters]:method:(d l e x h i)' + '--unicode=[specify how to display unicode characters]:method:(default locale escape hex highlight invalid)' '(-z --disassemble-zeroes)'{-z,--disassemble-zeroes}"[don't skip blocks of zeroes when disassembling]" '--start-address=[only process data whose address is >= ADDR]:address' @@ -73,15 +77,17 @@ case $variant in '(--show-raw-insn --no-show-raw-insn)'--{,no-}show-raw-insn'[display hex alongside symbolic disassembly]' '--insn-width=[display specified number of bytes on a single line with -d]:width (bytes)' '--adjust-vma=[add offset to all displayed section addresses]:offset' + '--show-all-symbols[when disassembling, display all symbols at a given address]' '--special-syms[include special symbols in symbol dumps]' '--inlines[print all inlines for source line (with -l)]' '--prefix=[add prefix to absolute paths for -S]:prefix' '--prefix-strip=[strip initial directory names for -S]:level' "--dwarf-depth=[don't display DIEs at specified or greater depth]:depth" '--dwarf-start=[display DIEs at specified or deeper depth]:depth' - '--dwarf-check[perform additional dwarf internal consistency checks]' + '--dwarf-check[perform additional dwarf consistency checks]' '--ctf-parent=[use specified section as the CTF parent]:section' '--visualize-jumps=-[visualize jumps by drawing ASCII art lines]::color:(color extended-color off)' + '--disassembler-color=[control use of colored syntax highlighting in disassembly output]:color use [on]:(off terminal on extended)' ) ;; elfutils) diff --git a/Completion/Unix/Command/_openldap b/Completion/Unix/Command/_openldap new file mode 100644 index 000000000..233d0950e --- /dev/null +++ b/Completion/Unix/Command/_openldap @@ -0,0 +1,222 @@ +#compdef ldapadd ldapcompare ldapdelete ldapexop ldapmodify ldapmodrdn ldappasswd ldapsearch ldapurl ldapwhoami + +local curcontext="$curcontext" nm="$compstate[nmatches]" +local -a args auth state line expl + +args=( '*-e[general extensions]:extension:->general-extensions' ) + +case $service in + ldapadd|ldapcompare|ldapdelete|ldapexop|ldapmodify|ldapmodrdn|ldappasswd|ldapsearch|ldapwhoami) + if (( $words[(I)-[^Z]#Z[^Z]#] )); then + args+=( '*-Z[require success for start TLS request]' ) + elif (( ! $words[(I)-[^Z]#Z] )); then + args+=( '-Z[start TLS request]' ) + fi + args+=( + '!(-)-VV' '-V[display version information]' + '*-d+[set LDAP debugging level]:level:((1\:trace 2\:packets 4\:args 8\:conns 10\:ber 2048\:parse -1\:all))' + "-n[show what would be done but don't actually do it]" + '-v[verbose output]' + "-N[don't use reverse DNS to canonicalize SASL host name]" + '*-o+[specify any ldap.conf options]: : _values option + "ldif_wrap[specify width]\:width" + "nettimeout[specify timeout]\:timeout (seconds)"' + ) + auth=( + '-D[specify bind DN]:binddn' + '-H[specify LDAP URIs]:uri' + '-P[specify protocol version]:version [3]:(2 3)' + + simple + '(sasl)-x[use simple authentication]' + '(sasl -W -y)-w+[specify bind password]:bind password' + '(sasl -w -y)-W[prompt for bind password]' + '(sasl -w -W)-y+[read password from file]:file:_files' + + sasl + '(simple)-O+[specify SASL security properties]: : _values -s , property + none noplain noactive nodict noanonymous forwardsec passcred + minssf\:factor maxssf\:factor maxbufsize\:factor' + '(simple)-X+[specify SASL authorization identity]:authzid:->authzids' + '(simple)-Y+[specify SASL mechanism]:mechanism:compadd -M "m:{a-zA-Z}={A-Za-z}" EXTERNAL GSSAPI' # iana has a full list but cyrus support seems limited + '(simple)-R+[specify SASL realm]:realm' + '(simple)-U+[specify SASL authentication identity]:authcid' + '(simple)-I[use SASL Interactive mode]' + '(simple)-Q[use SASL Quiet mode]' + ) + ;| + ldapadd|ldapcompare|ldapdelete|ldapmodify|ldapmodrdn|ldapsearch) + if (( $words[(I)-[^M]#M[^M]#] )); then + args+=( '*-M[enable Manage DSA IT control critical]' ) + elif (( ! $words[(I)-[^M]#M] )); then + args+=( '-M[enable Manage DSA IT control]' ) + fi + ;| + ldapadd|ldapdelete|ldapmodify|ldapmodrdn|ldapsearch) + # ldapexop documents but doesn't implement this + args+=( '(1 2 *)-f+[read operations from file]:file:_files' ) + ;| + ldapadd|ldapdelete|ldapmodify|ldapmodrdn|ldapsearch) + args+=( "-c[continuous operation mode (don't stop on errors)]" ) + ;| + ldapdelete|ldapsearch) + args+=( '-z+[specify size limit]:size limit (entries)' ) + ;| + ldapadd|ldapmodify) + args+=( + '-S+[write records that are skipped due to an error to file]:file:_files' + '*-E+[modify extensions]:extension:->modify-extensions' + ) + ;| + ldapurl|ldapsearch) + args+=( + '(decompose)-s+[specify search scope]:search scope [sub]:(base one sub children)' + ) + ;| + ldapdelete|ldapmodrdn|ldapurl|ldapwhoami) args+=( '!*-E+:extension' ) ;| + + ldapadd) args+=( '!-a' ) ;; + ldapmodify) args+=( '-a[add new entries]' ) ;; + ldapcompare) + args+=( + '-z[quiet mode - no output aside return status]' + '*-E+[compare extensions]:extension:->compare-extensions' + ) + ;; + ldapdelete) + args+=( + '-r[do a recursive delete]' + '*: :_guard "^-*" "distinguished name"' + ) + ;; + ldapexop) args+=( '*:: :->extended-operations' ) ;; + ldapmodrdn) + args+=( + '-r[remove old RDN values from the entry]' + '-s[specify new superior entry to move target to]:entry' + '1:distinguished name' + '2:relative distinguished name' + ) + ;; + ldappasswd) + args+=( + '(-a -t)-A[prompt for old password]' + '(-A -t)-a+[specify old password]:password' + '(-A -a)-t+[read old password from file]:file:_files' + '(-s -T)-S[prompt for new password]' + '(-S -T)-s+[specify new password]:password' + '(-S -s)-T+[read new password from file]:file:_files' + ) + ;; + ldapsearch) + if (( $words[(I)-[^L]#L[^L]#L[^L]#] )); then + args+=( '*-L[LDIF format without comments and version]' ) + elif (( $words[(I)-[^L]#L[^L]#] )); then + args+=( '*-L[LDIF format without comments]' ) + elif ! (( $words[(I)-[^L]#L[^L]#L[^L]#L] )); then + args+=( '-L[LDIFv1 format]' ) + else + args+=( '!*-L' ) + fi + if (( $words[(I)-[^t]#t[^t]#] )); then + args+=( '*-t[write all retrieved values to files in temporary directory]' ) + elif (( ! $words[(I)-[^t]#t] )); then + args+=( '-t[write binary values to files in temporary directory]' ) + fi + + args+=( + '-a+[specify how aliases dereferencing is done]:deref [never]:(never always search find)' + '-A[retrieve attributes only (no values)]' + '-b+[specify base dn for search]:basedn' + '*-E+[search extensions]:extension:->search-extensions' + '-F+[specify URL prefix for temporary files]:prefix [file:///tmp//]' + '-l+[specify time limit for search]:time limit (seconds)' + '-S+[sort results by specified attribute]:attribute:_ldap_attributes' + '-T[write files to specified directory]:path [/tmp]:_directories' + '-u[include User Friendly entry names in the output]' + '1: :_ldap_filters' + '2: : _alternative + "attributes:attribute:_ldap_attributes" + "attributes:attribute:((1.1\:no\ attributes \*\:all\ user\ attributes \+\:all\ operational\ attributes))"' + '*:attribute:_ldap_attributes -F line' + ) + ;; + ldapurl) + args+=( + - compose + '-a+[set a list of attribute selectors]:attribute selectors (comma separated)' + '-b+[set the searchbase]:search base' + '-f+[set the URL filter]:filter:_ldap_filters' + '-h+[set the host]:host:_hosts' + '-p+[set the tcp port]:port:(389 636)' + '-S+[set the URL scheme]:scheme:(ldap ldaps)' + - decompose + '(-s)-H+[specify URI to be exploded]:uri' + ) + ;; +esac + +_arguments -C -S -s $args $auth + +case $state in + extended-operations) + case $CURRENT:$words[1] in + 1:*) + if compset -P '*::'; then + _message -e data 'base64 data' + elif compset -P '*:'; then + _message -e data data + else + _alternative \ + 'oids::_guard "(<->(|.))#" oid' \ + 'operations:operation:(whoami cancel refresh)' + fi + ;; + 2:cancel) _message -e ids 'cancel id' ;; + 2:refresh) _message -e names 'distinguished name' ;; + 3:refresh) _message -e times 'ttl' ;; + *) _message 'no more arguments' ;; + esac + ;; + *-extensions) + if ! compset -P \!; then + _description criticality expl critical + compadd -S "" "$expl[@]" \! + fi + ;| + modify-extensions) _values extension 'txn:txn:(abort commit)' ;; + compare-extensions) _values extension dontUseCopy ;; + search-extensions) + _values extension \ + 'mv[matched values filter]:filter:_ldap_filters' \ + 'pr[paged results/prompt]:size[/prompt|noprompt]' \ + 'sss[server side sorting]: :_sequence -s / _ldap_attributes' \ + 'subentries: :(true false)' \ + 'sync:sync[/cookie][/slimit]:((ro\:refreshOnly rp\:refreshAndPersist))' \ + 'vlv[virtual list view]:before/after(/offset/count|\:value' \ + 'deref:derefAttr:_sequence _ldap_attributes' \ + dontUseCopy domainScope + ;; + general-extensions) + _values extension \ + 'assert:filter:_ldap_filters' \ + 'authzid:authzid:->authzids' \ + {post,pre}'read: :_sequence _ldap_attributes' \ + 'sessiontracking:username:_users' \ + 'chaining:behavior:(chainingPreferred chainingRequired referralsPreferred referralsRequired)' \ + bauthzid manageDSAit noop ppolicy relax abandon cancel ignore + ;& + authzids) + if [[ $state != authzids ]]; then + : # fall-through from above without the authzids state + elif compset -P 'u:'; then + _description users expl authzid + _users "$expl[@]" + elif compset -P 'dn:'; then + _message -e ids 'distinguished name' + else + _description prefixes expl prefix + compadd -S: "$expl[@]" u dn + fi + ;; +esac + +[[ nm -ne "$compstate[nmatches]" ]] diff --git a/Completion/Unix/Command/_pandoc b/Completion/Unix/Command/_pandoc index b0fff80d6..797e73eaa 100644 --- a/Completion/Unix/Command/_pandoc +++ b/Completion/Unix/Command/_pandoc @@ -113,7 +113,7 @@ _pandoc_defaults_file() { # choose reference location (( $+functions[_pandoc_reference_location] )) || -_pandoc_reference_location(){ +_pandoc_reference_location() { local -a policies policies=( 'block:place references at the end of the current (top-level) block' @@ -123,22 +123,16 @@ _pandoc_reference_location(){ _describe 'location' policies } -# choose top level division -(( $+functions[_pandoc_top_level_division] )) || -_pandoc_top_level_division(){ - _values 'top level division' default section chapter part -} - # choose email obfusication (( $+functions[_pandoc_email_obfusication] )) || _pandoc_email_obfusication(){ local -a policies policies=( - 'none:leave mailto: links as they are' - 'javascript:obfuscates them using JavaScript' - 'references:obfuscates them by printing their letters as decimal or hexadecimal character references' + 'none:leave mailto: links as-is' + 'javascript:obfuscate using JavaScript' + 'references:obfuscate by printing letters as decimal or hexadecimal character references' ) - _describe 'obfuscation policy [none]' policies + _describe 'e-mail obfuscation policy [none]' policies } # choose wrapping policy @@ -181,26 +175,26 @@ _pandoc_track_changes() { _arguments -s \ {-f+,-r+,--from=,--read=}'[specify input format]: :_pandoc_format -T input' \ {-t+,-w+,--to=,--write=}'[specify output format]: :_pandoc_format -T output' \ - {-o+,--output=}'[write output to FILE instead of stdout]:file:_files' \ + {-o+,--output=}'[write output to specified file instead of stdout]:file:_files' \ '--data-dir=[specify the user data directory to search for pandoc data files]:data directory:_files -/' \ {-d+,--defaults=}'[read default from YAML file]: :_pandoc_defaults_file' \ '--shift-heading-level-by=[shift heading levels by specified number]:positive or negative integer: ' \ '!--base-header-level=:number [1]:(1 2 3 4 5)' \ - '!--strip-empty-paragraphs[deprecated. Use the +empty_paragraphs extension instead]' \ - '--indented-code-classes=[classes to use for indented code blocks]:class list (comma-separated)' \ + '--indented-code-classes=[specify classes to use for indented code blocks]:class list (comma-separated)' \ '--default-image-extension=[specify a default extension to use when image paths/URLs have no extension]:extension: ' \ '--file-scope[parse each file individually before combining for multifile documents]' \ + '--sandbox=-[run in a sandbox, limiting IO operations]::enable:(true false)' \ {\*-F+,\*--filter=}'[specify an executable to be used as a filter transforming the pandoc AST after the input is parsed and before the output is written]: :_pandoc_filter' \ {\*-L+,\*--lua-filter=}"[transform the document by using pandoc's built-in lua filtering system]: :_pandoc_lua_filter" \ {\*-M+,\*--metadata=}'[set the metadata field KEY to the value VALUE]:key\:value: ' \ '*--metadata-file=[read metadata from file]:YAML or JSON file:_files' \ {-p,--preserve-tabs}'[preserve tabs instead of converting them to spaces]' \ '--tab-stop=[specify the number of spaces per tab]:spaces [4]' \ - '--track-changes=[specifies what to do with insertions, deletions, and comments produced by the MS Word "Track Changes" feature]: :_pandoc_track_changes' \ + '--track-changes=[specify what to do with insertions, deletions, and comments produced by the MS Word "Track Changes" feature]: :_pandoc_track_changes' \ '--extract-media=[extract media in source document to specified directory]:directory:_files -/' \ - '--abbreviations=[specifies a custom abbreviations file]:file:_files ' \ + '--abbreviations=[specify a custom abbreviations file]:file:_files ' \ {-s,--standalone}'[produce output with an appropriate header and footer]' \ - '--template=[use FILE as a custom template for the generated document. Implies --standalone]: :_pandoc_template' \ + '--template=[use specified file as a custom template for the generated document. Implies --standalone]: :_pandoc_template' \ {\*-V+,\*--variable=}'[set the variable KEY to the value VALUE]:key\:value: ' \ '(- :)'{-D+,--print-default-template=}'[print the system default template for an output]:format:( $(pandoc --list-output-formats) )' \ '(- :)--print-default-data-file=[print a system default data file]:file: ' \ @@ -211,43 +205,48 @@ _arguments -s \ {--toc,--table-of-contents}'[include an automatically generated table of contents]' \ '--toc-depth=[specify the number of section levels to include in the table of contents]:number' \ '--strip-comments[strip out HTML comments in the Markdown or Textile source]' \ - '--no-highlight[disables syntax highlighting for code blocks and inlines]' \ - '--highlight-style=[specifies the coloring style to be used in highlighted source code]:style|file:_pandoc_highlight_style' \ + '--no-highlight[disable syntax highlighting for code blocks and inlines]' \ + '--highlight-style=[specify coloring style to be used in highlighted source code]: :_pandoc_highlight_style' \ '(- :)--print-highlight-style=[prints a JSON version of a highlighting style]: :_pandoc_highlight_style' \ '--syntax-definition=[load a KDE XML syntax definition file]:file:_files -g "*.xml(-.)"' \ - {\*-H+,\*--include-in-header=}'[include contents of FILE, verbatim, at the end of the header, implies --standalone]:file:_files' \ - {\*-B+,\*--include-before-body=}'[include contents of FILE, verbatim, at the beginning of the document body, implies --standalone]:file:_files' \ - {\*-A+,\*--include-end-body=}'[include contents of FILE, verbatim, at the end of the document body, implies --standalone]:file:_files' \ + \*{-H+,--include-in-header=}'[include contents of file, verbatim, at the end of the header, implies --standalone]:file:_files' \ + \*{-B+,--include-before-body=}'[include contents of file, verbatim, at the beginning of the document body, implies --standalone]:file:_files' \ + \*{-A+,--include-end-body=}'[include contents of file, verbatim, at the end of the document body, implies --standalone]:file:_files' \ '--resource-path=[list of paths to search for images and other resources]:searchpath:_dir_list' \ '--request-header=[set the request header NAME to the value VAL when making HTTP requests]:name\:val: ' \ '--no-check-certificate[disable the certificate verification]' \ '--self-contained[produce a standalone HTML file with no external dependencies, using data: URIs to incorporate the contents of linked scripts, stylesheets, images, and videos. Implies --standalone]' \ + '--embed-resources=-[produce a standalone HTML document with no external dependencies]::enable:(true false)' \ '--html-q-tags[use <q> tags for quotes in HTML]' \ '--ascii[use only ASCII characters in output, supported only for HTML and DocBook output]' \ '--reference-links[use reference-style links, rather than inline links]' \ '--reference-location=[specify where footnotes (and references, if reference-links is set) are placed (block|section|document)]: :_pandoc_reference_location' \ '--markdown-headings[specify style for level1 and 2 headings in markdown output]:style [atx]:(setext atx)' \ - '!--atx-headers[use ATX-style headers in Markdown and AsciiDoc output]' \ - '--top-level-division=[treat top-level headers as the given division type in LaTeX, ConTeXt, DocBook, and TEI output]: :_pandoc_top_level_division' \ + '--list-tables=-[render tables as list tables in RST output]::enable(true false)' \ + '--top-level-division=[treat top-level headers as given division type in LaTeX, ConTeXt, DocBook and TEI output]:top level division:(default section chapter part)' \ {-N,--number-sections}'[number section headings in LaTeX, ConTeXt, HTML, or EPUB output]' \ - '--number-offset=[offset for section headings in HTML output (ignored in other output formats)]:number[number,...] [0]' \ + '--number-offset=[specify offset for section headings in HTML output (ignored in other output formats)]:number[number,...] [0]' \ '--listings[use the listings package for LaTeX code blocks]' \ {-i,--incremental}'[make list items in slide shows display incrementally (one by one)]' \ - '--slide-level=[specifies that headers with the specified level create slides (for beamer, s5, slidy, slideous, dzslides)]:slide level:(1 2 3 4 5 6)' \ - '--section-divs[wrap sections in <section> tags (or <div> tags for html4)Use the section-divs package for LaTeX code blocks]' \ - '--email-obfusication=[treat top-level headers as the given division type in LaTeX, ConTeXt, DocBook, and TEI output (none|javascript|references)]: :_pandoc_email_obfusication' \ + '--slide-level=[divide into slides for headers above the specified level (for beamer, s5, slidy, slideous, dzslides)]: :_pandoc_header_levels' \ + '--section-divs[wrap sections in <section> tags (or <div> tags for html4)]' \ + '--email-obfusication=[specify method for obfusicating mailto: links in HTML documents]: :_pandoc_email_obfusication' \ '--id-prefix=[specify a prefix to be added to all identifiers and internal links in HTML and DocBook output]:string: ' \ {-T+,--title-prefix=}'[specify STRING as a prefix at the beginning of the title that appears in the HTML header]:string: ' \ {\*-c+,\*--css=}'[link to a CSS style sheet]: :_urls' \ - '--reference-doc=[use the specified file as a style reference in producing a docx or ODT file]:file: ' \ + '--reference-doc=[use specified file as a style reference in producing a docx or ODT file]:file:_files' \ '--epub-subdirectory=[specify the subdirectory in the OCF container that is to hold the EPUB-specific contents]:directory:_files -/' \ '--epub-cover-image=[use the specified image as the EPUB cover]:file:_files' \ + '--epub-title-page=-[determine whether title page is included in EPUB]::enable [true]:(true false)' \ '--epub-metadata=[look in the specified XML file for metadata for the EPUB]:file:_files -g "*.xml(-.)"' \ '*--epub-embed-font=[embed the specified font in the EPUB]:file:_files ' \ + '--split-level=[specify heading level at which to split an EPUB or chunked HTML into separate files]:heading level' \ + '--chunk-template=[specify filename template for a chunked html document]:template' \ '--epub-chapter-level=[specify the header level at which to split the EPUB into separate "chapter" files]:number:(1 2 3 4 5 6)' \ '--ipynb-output=[specify how to tread ipynb output cells]:method:(all none best)' \ - '--pdf-engine=[use the specified engine when producing PDF output]:program:_pandoc_pdf_engine' \ - '*--pdf-engine-opt=[use the given string as a command-line argument to the pdf-engine]:string:_pandoc_pdf_engine_opts' \ + '--pdf-engine=[use specified engine when producing PDF output]:program:_pandoc_pdf_engine' \ + '*--pdf-engine-opt=[use given string as a command-line argument to the pdf-engine]:string:_pandoc_pdf_engine_opts' \ + '(-C --citeproc)'{-C,--citeproc}'[process citations]' \ "*--bibliography=[set the bibliography field in the document's metadata to specified file]:file:_files -g '*.(bib|bibtex|copac|json|yaml|enl|xml|wos|medline|mods|ris)(-.)'" \ "--csl=[set the csl field in the document's metadata to specified file]:file:_files -g '*.csl(-.)'" \ '--citation-abbreviations=[set the citation-abbreviations field in the document'"'"'s metadata to FILE]:file:_files' \ @@ -257,10 +256,10 @@ _arguments -s \ '--webtex=[convert TeX formulas to <img> tags that link to an external script that converts formulas to images]:: :_urls' \ '--mathjax=[use MathJax to display embedded TeX math in HTML output]:: :_urls' \ '--katex=[use KaTeX to display embedded TeX math in HTML output]:: :_urls' \ - '--gladtex[Enclose TeX math in <eq> tags in HTML output]' \ + '--gladtex[enclose TeX math in <eq> tags in HTML output]' \ '--trace[enable tracing]' \ - '--dump-args[print information about command-line arguments to stdout, then exit]' \ - '--ignore-args[ignore command-line arguments (for use in wrapper scripts)]' \ + '!--dump-args' \ + '!--ignore-args' \ '--verbose[give verbose debugging output]' \ '--quiet[suppress warning messages]' \ '--fail-if-warnings[exit with error status if there are any warnings]' \ @@ -271,6 +270,7 @@ _arguments -s \ '(- :)--list-extensions=[list supported extensions, one per line, preceded by a + or - indicating whether it is enabled by default in FORMAT]:format:_pandoc_all_formats' \ '(- :)--list-highlight-languages[list supported languages for syntax highlighting, one per line]' \ '(- :)--list-highlight-styles[list supported styles for syntax highlighting, one per line]' \ + '(- :)--print-highlight-style=[print JSON version of a highlighting style]: :_pandoc_highlight_style' \ '(- :)'{-v,--version}'[print version]' \ '(- :)'{-h,--help}'[print help]' \ '*:file:_files' diff --git a/Completion/Unix/Command/_perl b/Completion/Unix/Command/_perl index d7e8f1b51..1631560ce 100644 --- a/Completion/Unix/Command/_perl +++ b/Completion/Unix/Command/_perl @@ -17,6 +17,7 @@ _perl () { '(1 -e)*-E+[like -e but enable all optional features]:one line of program' \ '-f[disable executing $Config{sitelib}/sitecustomize.pl at startup]' \ '-F-[split() pattern for autosplit (-a)]:split() pattern, // is optional' \ + '-g[read all input in one go (slurp), rather than line-by-line (alias for -0777)]' \ '-h[list help summary]' \ '-i-[edit <> files in place (make backup if extension supplied)]:backup file extension: ' \ '*-I-[specify @INC/#include directory (may be used more than once)]:include path:_files -/' \ diff --git a/Completion/Unix/Command/_perlbrew b/Completion/Unix/Command/_perlbrew new file mode 100644 index 000000000..8bf9ba7cc --- /dev/null +++ b/Completion/Unix/Command/_perlbrew @@ -0,0 +1,315 @@ +#compdef perlbrew + +# +# A zsh completion script for perlbrew (https://metacpan.org/dist/App-perlbrew/) +# + +local curcontext="$curcontext" state state_descr line ret=1 +local -a args_common args_install +typeset -A opt_args +# others local variables +typeset -g perlbrew_subcommands + +## +## get the list of perl available versions +## +(( $+functions[_perlbrew_caching_policy] )) || +_perlbrew_caching_policy() { + # rebuild if cached data are more than one week old + local -a newer=( "$1"(Nmw-1) ) + return $#newer +} + +(( $+functions[_perl_available] )) || +_perl_available() { + local -a available_versions + local update_policy + + zstyle -s ":completion:${curcontext}:" cache-policy update_policy + if [[ -z "$update_policy" ]]; then + zstyle ":completion:${curcontext}:" cache-policy _perlbrew_caching_policy + fi + + if _cache_invalid perlbrew-available-versions || ! _retrieve_cache perlbrew-available-versions; then + # this can be slow + available_versions=( ${${${${(f)"$(_call_program perl_releases perlbrew available)"}/\# (cp|p)erl/}/(#s)i /}// /} \ + perl-stable \ + perl-blead ) + _store_cache perlbrew-available-versions available_versions + fi + _values 'available version' ${(n)available_versions} +} + +## +## get the list of local perl installations +## +(( $+functions[_perl_installations] )) || +_perl_installations() { + local text + local -a installed alias_link + + case "$1" in + (-with-lib) + installed=( ${${${(f)"$(_call_program perl_installed perlbrew list)"}/(#s)\*/}// /} ) + text="perl installation" + ;; + (-only-lib) + installed=( ${(M)${${${(f)"$(_call_program perl_installed perlbrew list)"}/(#s)\*/}// /}:#*@*} ) + text="perl installation" + ;; + (-without-lib) + installed=( ${${${${(f)"$(_call_program perl_installed perlbrew list)"}/(#s)\*/}// /}:#*@*} ) + text="perl installation" + ;; + (-alias) + if [[ -n "$PERLBREW_ROOT" ]]; then + if [[ -d "$PERLBREW_ROOT/perls" ]]; then + alias_link=( $PERLBREW_ROOT/perls/*(@) ) + fi + fi + installed=( ${(q)${alias_link:t}[@]} ) + text="alias" + ;; + esac + + if [[ ${#installed[@]} -eq 0 ]]; then + _message 'no local perl installation found' + else + case "$2" in + (-comma-separated) + _values -s , "$text" $installed + ;; + (*) + _values "$text" $installed + ;; + esac + fi +} + +## +## completion for the alias subcommand +## +(( $+functions[_perlbrew_alias] )) || +_perlbrew_alias() { + local line state ret=1 + + _arguments -C \ + -f'[force]' \ + "1: :->actions" \ + "*::arg:->args" && ret 0 + + case "$state" in + (actions) + local -a alias_actions + alias_actions=( + "create:create an alias for the installation named <name>" + "rename:rename the alias to a new name" + "delete:delete the given alias" + ) + _describe -t commands 'alias action' alias_actions && ret=0 + ;; + (args) + case $line[1] in + (create) + _arguments \ + '1:perl installation: _perl_installations -without-lib' \ + '2: : _message "alias name"' && ret=0 + ;; + (rename) + _arguments \ + '1:perl installation: _perl_installations -alias' \ + '2: : _message "new name"' && ret=0 + ;; + (delete) + _arguments \ + ':perl installation: _perl_installations -alias' && ret=0 + ;; + esac + ;; + esac +} + +## +## completion for the lib subcommand +## +(( $+functions[_perlbrew_lib] )) || +_perlbrew_lib() { + local line state ret=1 + + _arguments -C \ + "1: :->actions" \ + "*::arg:->args" && ret=0 + + case "$state" in + (actions) + local -a lib_actions + lib_actions=( + "list:list existing local libs" + "create:create a local lib" + "delete:delete a local lib" + ) + _describe -t commands 'lib action' lib_actions && ret=0 + ;; + (args) + case $line[1] in + (list) + _nothing && ret=0 + ;; + (create) + _message 'lib name' && ret=0 + ;; + (delete) + _arguments \ + ':perl installation: _perl_installations -only-lib' && ret=0 + ;; + esac + ;; + esac +} + +## +## main completion script +## + +args_common=( + '(-q --quiet)'{-q,--quiet}'[be quiet on informative output message]' \ + '(-v --verbose)'{-v,--verbose}'[tell me more about it]' \ + ':perlbrew command:->subcommands' \ + '*::: := ->option-or-argument' +) + +args_install=( + '(-f --force)'{-f,--force}'[force installation]' \ + -j"[number of building jobs run in parallel]::number" \ + '(-n --notest)'{-n,--notest}'[skip testing]' \ + --switch"[automatically switch to this perl version once installed]" \ + --as"[install the given version of perl by a name]:alias name" \ + --noman"[skip installation of manpages]" \ + --thread"[build perl with usethreads enabled]" \ + --multi"[build perl with usemultiplicity enabled]" \ + --64int"[build perl with use64bitint enabled]" \ + --64all"[build perl with use64bitall enabled]" \ + --ld"[build perl with uselongdouble enabled]" \ + --debug"[build perl with DEBUGGING enabled]" \ + --clang"[build perl using the clang compiler]" \ + --no-patchperl"[skip calling patchperl]" \ + {-D,-U,-A}"[switches passed to perl Configure script]:value:" \ + --destdir"[install perl as per 'make install DESTDIR=\$path']: :_files -/" \ + --sitecustomize"[specify a file to be installed as sitecustomize.pl]: :_files" \ + --mirror"[specify a CPAN-mirror url]:URL:_urls" +) + +_arguments -C $args_common && ret=0 + +case $state in + (subcommands) + + perlbrew_subcommands=( + "init:initialize perlbrew environment" + "info:show useful information about the perlbrew installation" + "install:install perl" + "uninstall:uninstall the given installation" + "available:list perls available to install" + "lib:manage local::lib directories" + "alias:give perl installations a new name" + "upgrade-perl:upgrade the current perl" + "list:list perl installations" + "use:use the specified perl in current shell" + "off:turn off perlbrew in current shell" + "switch:permanently use the specified perl as default" + "switch-off:permanently turn off perlbrew (revert to system perl)" + "exec:exec programs with specified perl environments" + "clone-modules:re-installs all CPAN modules from one installation to another" + "self-install:install perlbrew itself under PERLBREW_ROOT/bin" + "self-upgrade:upgrade perlbrew itself" + "install-patchperl:install patchperl" + "install-cpanm:install cpanm, a friendly companion" + "install-cpm:install cpm, a faster but still friendly companion" + "install-multiple:install multiple versions and flavors of perl" + "download:download the specified perl distribution tarball" + "clean:purge tarballs and build directories" + "version:display version" + "help:read more detailed instructions" + ) + + _describe -t commands 'perlbrew command' perlbrew_subcommands && ret=0 + + ;; + (option-or-argument) + curcontext=${curcontext%:*}-$line[1]: + case $line[1] in + (info) + _message 'perl module name' && ret=0 + ;; + (install) + _arguments \ + $args_install \ + '1:perl release: _perl_available' && ret=0 + ;; + (install-multiple) + _arguments \ + $args_install \ + '*'--both"[perl flavor]: :(thread multi ld 64int 64all debug clang )" \ + --common-variations"[equivalent to '--both thread --both ld --both 64int']" \ + --all-variations"[generates all the possible flavor combinations]" \ + --append"[appends the given string to the generated names]:string" \ + '*:perl release: _perl_available' && ret=0 + ;; + (uninstall) + _arguments \ + ":perl installation: _perl_installations -without-lib" && ret=0 + ;; + (use|switch) + _arguments \ + ':perl installation: _perl_installations -with-lib' && ret=0 + ;; + (available) + _arguments \ + '--all[list of all perls ever released, including development and RC versions]' \ + '*: :' && ret=0 + ;; + (alias) + _perlbrew_alias && ret=0 + ;; + (exec) + _arguments -C \ + --with'[specify one or more perl installations to use]: : _perl_installations -without-lib -comma-separated' \ + --min'[minimum perl version]:version number (n.nnnnn):' \ + --max'[maximum perl version]:version number (n.nnnnn):' \ + --halt-on-error'[stop on first nonzero exit status]' \ + "1:command:" \ + "*:args:" && ret=0 + ;; + (env) # NOTE: Low level command + _arguments \ + ':perl installation: _perl_installations -with-lib' && ret=0 + ;; + (symlink-executables) # NOTE: Low level command + _arguments \ + ':perl installation: _perl_installations -with-lib' && ret=0 + ;; + (lib) + _perlbrew_lib && ret=0 + ;; + (download) + _arguments \ + ':perl release: _perl_available' && ret=0 + ;; + (clone-modules) + _arguments \ + '--notest[skip all module tests]' \ + ':perl installation: _perl_installations -with-lib' \ + ':perl installation: _perl_installations -with-lib' && ret=0 + ;; + (init|list|off|switch-off|install-cpanm|install-patchperl|self-upgrade|\ + self-install|clean|version|upgrade-perl|list-modules) + _nothing && ret=0 + ;; + (*) + _default && ret=0 + ;; + esac + ;; +esac + +return ret diff --git a/Completion/Unix/Command/_pgrep b/Completion/Unix/Command/_pgrep index 9c3ddf039..94c1dae1a 100644 --- a/Completion/Unix/Command/_pgrep +++ b/Completion/Unix/Command/_pgrep @@ -34,6 +34,7 @@ arguments=( '(-P --parent)'{-P+,--parent=}'[match only on specified parent process IDs]: :->ppid' '(-l)-q[suppress normal output]' '(-r --runstates)'{-r+,--runstates}'[match runstates]:run state:compadd -S "" D I R S T t W X Z' + '(-A --ignore-ancestors)'{-A,--ignore-ancestors}'[exclude our ancestors from results]' '-S[search also in system processes (kernel threads)]' '(-s --session)'{-s+,--session=}'[match only on specified process session IDs]: :->sid' # _signals is OK here - we do it differently below @@ -44,6 +45,7 @@ arguments=( '(-u --euid)'{-u+,--euid=}'[match only on specified effective user IDs]: :_sequence _users' '(-v --inverse)'{-v,--inverse}'[negate matching]' '(-x --exact)'{-x,--exact}'[match process name or command line (with -f) exactly]' + '--cgroup=[match by cgroup v2 names]:cgroup' '--ns=[match only on same namespaces as specified PID]: :_pids' '--nslist=[match only on specified namespaces (with --ns)]:namespace:(ipc mnt net pid user uts)' '(: * -)'{-V,--version}'[display version information]' @@ -55,6 +57,8 @@ arguments=( '(-w --lightweight)'{-w,--lightweight}'[show all thread IDs instead of PID]' ) [[ $service == pkill ]] && arguments+=( + '(-H --require-handler)'{-H,--require-handler}'[match only if signal handler is present]' + '(-q --queue)'{-q+,--queue=}'[specify value to be sent with the signal]:value' '(-e --echo)'{-e,--echo}'[display signalled process]' '-l[display kill command]' ) @@ -62,8 +66,8 @@ arguments=( case $OSTYPE in linux*) # Note: We deliberately exclude -v but not --inverse from pkill - pgopts=acdFfGghLlnoOPrstUuVvwx- - pkopts=ceFfGghLnoOPstUuVx- + pgopts=AacdFfGghLlnoOPrstUuVvwx- + pkopts=AceFfGgHhLnoOPstUuVx- arguments=( ${arguments:#((#s)|*\))(\*|)-[acl]*} '(-c --count)'{-c,--count}'[display count of matching processes]' diff --git a/Completion/Unix/Command/_ping b/Completion/Unix/Command/_ping index d36a0f3a9..84bd76b82 100644 --- a/Completion/Unix/Command/_ping +++ b/Completion/Unix/Command/_ping @@ -199,7 +199,9 @@ case ${variant}:${${service#ping}:-4} in '-A[adaptive]' '-b[allow pinging a broadcast address]' "-B[don't allow ping to change source address]" + '-C[call connect() syscall on socket creation]' '-D[print timestamp before each line]' + '-e+[define identifier for ping session]:identifier' '(-4)-F+[allocate and set 20-bit flow label]:flow label (hex)' '(-)-h[show usage information]' '-I+[specify source interface]:interface:_net_interfaces' diff --git a/Completion/Unix/Command/_ps b/Completion/Unix/Command/_ps index 9b54cbcc6..c3dfae47d 100644 --- a/Completion/Unix/Command/_ps +++ b/Completion/Unix/Command/_ps @@ -105,6 +105,7 @@ case $OSTYPE in bsdarg+=( 'M[extract values from specified core]' ) ;| linux-gnu|netbsd*) bsdarg+=( 'k[specify sort order]' ) ;| + linux-gnu|openbsd*) bsd+=( 'f[show process hierarchy]' ) ;| darwin*|freebsd*) bsd+=( 'X[skip processes with no controlling terminal]' ) bsdarg+=( '*G[select processes by real group]' ) @@ -162,10 +163,12 @@ case $OSTYPE in '(-N --deselect)'{-N,--deselect}'[negate selection: all processes except those selected]' '*-C[select processes by command name]:command:_sequence -s , _command_names -e' '*--ppid[select processes by parent process ID]:parent process:_sequence -S , _pids' + '(-D --date-format)'{-D,--date-format=}'[set the date format of the lstart field to format]:format:_strftime' '(-f)-F[extra full format listing]' '--context[show SELinux security context format]' '-M[show security data]' '(--forest -H)'{--forest,-H}'[show process hierarchy]' + '-P[add psr column]' '--headers[repeat header lines, one per page of output]' '(--cols --columns --width)'{--cols,--columns,--width}'[set screen width]:width' '(--lines --rows)'{--lines,--rows}'[set screen height]' @@ -188,7 +191,6 @@ case $OSTYPE in done bsd+=( 'c[show true command name]' - 'f[show process hierarchy]' 'h[suppress header]' 'm[show threads after processes]' 'n[numeric output for WCHAN and USER]' diff --git a/Completion/Unix/Command/_pv b/Completion/Unix/Command/_pv index d02d3a35d..b21625650 100644 --- a/Completion/Unix/Command/_pv +++ b/Completion/Unix/Command/_pv @@ -17,7 +17,9 @@ _arguments -s -S $args \ '(-I --fineta -F --format)'{-I,--fineta}'[show absolute estimated time of arrival]' \ '(-r --rate -F --format)'{-r,--rate}'[show data transfer rate counter]' \ '(-a --average-rate -F --format)'{-a,--average-rate}'[show data transfer average rate counter]' \ - '(-b --bytes -F --format)'{-b,--bytes}'[show number of bytes transferred]' \ + '(-m --average-rate-window)'{-m+,--average-rate-window=}'[compute average rate over period]:duration (seconds) [30]' \ + '(-b --bytes -8 --bits -F --format)'{-b,--bytes}'[show number of bytes transferred]' \ + '(-8 --bits -b --bytes -F --format)'{-8,--bits}'[show number of bits transferred]' \ '(-T --buffer-percent -F --format)'{-T,--buffer-percent}'[show percentage of transfer buffer in use]' \ '(-A --last-written -F --format)'{-A+,--last-written=}'[show number of bytes last written]:number (bytes)' \ '(-F --format -p --progress -t --timer -e --eta -I --fineta -r --rate -a --average-rate -b --bytes -T --buffer-percent -A --last-written -F --format)'{-F+,--format=}'[set output format]:format:->formats' \ diff --git a/Completion/Unix/Command/_pydoc b/Completion/Unix/Command/_pydoc index 677c96ad6..626c528cd 100644 --- a/Completion/Unix/Command/_pydoc +++ b/Completion/Unix/Command/_pydoc @@ -6,13 +6,14 @@ local -a args args=( '(- *)-k[search keyword]:keyword' - '(-k -g -w *)-p[start web server on specified port]:port number' + '(-k -g -w)-p[start web server on specified port]:port number' '(-)-w[write out HTML in current directory]' '(-)*: :->lookup' ) if _pick_variant pydoc3='pydoc3 -b' pydoc2 -h; then - args+=( '(-k -w *)-b[start server and open browser]' ) + args+=( '(-k -w)-b[start server and open browser]' ) + args+=( '(-k -w)-n[start web server with the given hostname]:hostname' ) else args+=( '(- *)-g[start gui]' ) fi diff --git a/Completion/Unix/Command/_python b/Completion/Unix/Command/_python index e5bac18bb..6e209a199 100644 --- a/Completion/Unix/Command/_python +++ b/Completion/Unix/Command/_python @@ -1,9 +1,9 @@ #compdef -P python[0-9.]# # Python 2.7 -# Python 3.9 +# Python 3.11 -local curcontext="$curcontext" state state_descr line +local curcontext="$curcontext" state state_descr line _compskip="$_compskip" typeset -A opt_args local -a args @@ -12,7 +12,11 @@ if _pick_variant python3=Python\ 3 python2 --version; then '(-bb)-b[issue warnings about str(bytes_instance), str(bytearray_instance) and comparing bytes/bytearray with str]' '(-b)-bb[issue errors about str(bytes_instance), str(bytearray_instance) and comparing bytes/bytearray with str]' '--check-hash-based-pycs[configure how Python evaluates up-to-dateness of hash-based .pyc files]:mode:(always default never)' + '--help-env[print help about Python environment variables and exit]' + '--help-xoptions[print help about implementation-specific -X options and exit]' + '--help-all[print complete help information and exit]' "-I[isolate Python from the user's environment]" + '-P[do not prepend a potentially unsafe path to sys.path]' '-q[do not print version and copyright messages]' '-X[set implementation-specific option]:option' ) diff --git a/Completion/Unix/Command/_qemu b/Completion/Unix/Command/_qemu index 7bc02c30c..6ca11b4fb 100644 --- a/Completion/Unix/Command/_qemu +++ b/Completion/Unix/Command/_qemu @@ -51,5 +51,7 @@ _arguments \ '-no-acpi[disable ACPI]' \ '-loadvm[start right away with a saved state]:file:_files' \ '-g[set initial graphic mode]:graphic mode:' \ + '-enable-kvm[enable KVM full virtualization support]' \ + '-bios[use specified BIOS image]:bios image:_files' \ ':disk image:_files' diff --git a/Completion/Unix/Command/_rake b/Completion/Unix/Command/_rake index 10d621991..49b49c014 100644 --- a/Completion/Unix/Command/_rake +++ b/Completion/Unix/Command/_rake @@ -1,12 +1,11 @@ #compdef rake -# rake, version 0.8.3 +# rake, version 13.0.6 local curcontext="$curcontext" state line expl ret=1 typeset -A opt_args _arguments -C -s -S \ - '(--classic-namespace -C)'{--classic-namespace,-C}'[put Task and FileTask in the top level namespace]' \ '(--dry-run -n)'{--dry-run,-n}'[do a dry run without executing actions]' \ '(- *)'{--describe,-D}'[describe the tasks (matching the specified pattern), then exit]:pattern::' \ '(--execute -e)'{--execute,-e}'[execute some Ruby code and exit]:Ruby code:' \ @@ -15,7 +14,7 @@ _arguments -C -s -S \ '(- *)'{--help,-h,-H}'[display help information]' \ \*{--libdir,-I}'[include specified directory in the search path for required modules]:library directory:_files -/' \ '(--rakelibdir --rakelib -R)'{--rakelibdir,--rakelib,-R}'[auto-import any .rake files in the specified directory. (default is 'rakelib')]:rake library directory:_files -/' \ - '(--nosearch -N)'{--nosearch,-N}'[do not search parent directories for the Rakefile]' \ + '(--nosearch --no-search -N)'{--nosearch,--no-search,-N}'[do not search parent directories for the Rakefile]' \ '(- *)'{--prereqs,-P}'[display the tasks and prerequisites, then exit]' \ '(--quiet -q --silent -s --verbose -v)'{--quiet,-q}'[do not log messages to standard output]' \ '(--rakefile -f)'{--rakefile,-f}'[use specified file as the rakefile]:rake file:_files' \ @@ -27,6 +26,18 @@ _arguments -C -s -S \ '(--trace -t)'{--trace,-t}'[turn on invoke/execute tracing, enable full backtrace]' \ '(--quiet -q --silent -s --verbose -v)'{--verbose,-v}'[log message to standard output (default)]' \ '(- *)'{--version,-V}'[display version information]' \ + '--backtrace=-[enable full backtrace]::out:(stderr stdout)' \ + '--comments[show commented tasks only]' \ + '--job-stats[display job statistics]:level' \ + '--suppress-backtrace[suppress backtrace lines matching regexp PATTERN]:pattern' \ + '(-A -a)'{-A,--all}'[show all tasks]' \ + '(-B --build-all)'{-B,--build-all}'[build all prerequisites, including those which are up-to-date]' \ + '(-C --directory)'{-C,--directory}'[change to DIRECTORY before doing anything]:dir:_files -/' \ + '(-G --no-system --nosystem)'{-G,--no-system,--nosystem}'[use standard project Rakefile search paths, ignore system wide rakefiles]' \ + '(-j --jobs)'{-j,--jobs}'[specifies the maximum number of tasks to execute in parallel]::tasks' \ + '(-m --multitask)'{-m,--multitask}'[treat all tasks as multitasks]' \ + '(- *)'{-W,--where}'[describe the tasks(matching optional PATTERN) then exit]::pattern' \ + '(-X --no-deprecation-warnings)'{-X,--no-deprecation-warnings}'[disable the deprecation warnings]' \ '*:target:->target' && ret=0 case "$state" in diff --git a/Completion/Unix/Command/_readelf b/Completion/Unix/Command/_readelf index fc0fb7ce1..b3abdf0a5 100644 --- a/Completion/Unix/Command/_readelf +++ b/Completion/Unix/Command/_readelf @@ -16,10 +16,12 @@ args=( '(-V --version-info)'{-V,--version-info}'[show version sections (if present)]' '(-A --arch-specific)'{-A,--arch-specific}'[show architecture specific information (if any)]' '(-c --archive-index)'{-c,--archive-index}'[show symbol/file index in an archive]' + '(-D --use-dynamic)'{-D,--use-dynamic}'[use dynamic section info when showing symbols]' \*{-x,--hex-dump=}"[dump contents of specified section as bytes]:section:($sections)" \*{-p,--string-dump=}"[dump contents of specified section as strings]:section:($sections)" - '-w+[show the contents of DWARF2 debug sections]::debug section:(l L i a p r m f F s o O R t U u T g A c k K)' - '--debug-dump=[show the contents of DWARF2 debug sections]::section:(rawline decodedline info abbrev pubnames aranges macro frames frames-interp str loc Ranges pubtypes gdb_index trace_info trace_abbrev trace_aranges addr cu_index links follow-links)' + '-w+[show the contents of DWARF2 debug sections]::debug section:(a A r c L f F g i o m p t R l s O u T U k K N)' + '--debug-dump=[show the contents of DWARF2 debug sections]::section:(abbrev addr aranges cu_index decodedline frames frames-interp gdb_index info loc macro pubnames pubtypes Ranges rawline str str-offsets trace_abbrev trace_aranges trace_info links follow-links no-follow-links)' + '(-P --process-links)'{-P,--process-links}'[display the contents of non-debug sections in separate debuginfo files]' '(-I --histogram)'{-I,--histogram}'[show histogram of bucket list lengths]' '(-W --wide)'{-W,--wide}'[allow output width to exceed 80 characters]' '(- *)'{-H,--help}'[display help information]' @@ -35,7 +37,6 @@ case $variant in '(-s --syms --symbols)'{-s,--syms,--symbols}'[show symbol table]' '(-n --notes)'{-n,--notes}'[show core notes (if present)]' '(-u --unwind)'{-u,--unwind}'[show unwind info (if present)]' - '(-D --use-dynamic)'{-D,--use-dynamic}'[use dynamic section info when showing symbols]' ) ;| elfutils|binutils) @@ -50,11 +51,14 @@ case $variant in ;| binutils) args+=( + '--sym-base=[force base for symbol sizes]:base:(0 8 10 16)' '!(-C --demangle)--no-demangle' '(--demangle)-C[decode symbol names]' - '(-C)--demangle=-[decode symbol names]::style [auto]:(auto gnu lucid arm hp edg gnu-v3 java gnat)' + '(-C)--demangle=-[decode symbol names]::style [auto]:(none auto gnu-v3 java gnat dlang rust)' '!(--no-recurse-limit)--recurse-limit' '--no-recurse-limit[disable demangling recursion limit]' + '-U+[specify how to display unicode characters]:method:(d l e x h i)' + '--unicode=[specify how to display unicode characters]:method:(default locale escape hex highlight invalid)' '(-L --lint --enable-checks)'{-L,--lint,--enable-checks}'[display warning messages for possible problems]' \*{-R,--relocated-dump=}"[dump contents of specified section as relocated bytes]:section:($sections)" "--dwarf-depth=[don't show DIEs at greater than specified depth]:depth" @@ -63,6 +67,7 @@ case $variant in '--ctf-parent=[use specified section as the CTF parent]:section' '--ctf-symbols=[use specified section as the CTF external symbol table]:section' '--ctf-strings=[use specified section as the CTF external string table]:section' + '--sframe=-[display SFrame info from section]::section name [.sframe]' '(-T --silent-truncation)'{-T,--silent-truncation}"[if a symbol name is truncated, don't add ... suffix]" ) ;; diff --git a/Completion/Unix/Command/_ri b/Completion/Unix/Command/_ri index 4d5a72985..fe458e25f 100644 --- a/Completion/Unix/Command/_ri +++ b/Completion/Unix/Command/_ri @@ -26,33 +26,22 @@ _arguments -C \ '*:ri name:->ri-name' && return if [[ "$state" = ri-name ]]; then - local -a ri_dirs ri_ext ri_names ri_wants ri_names + local -a ri_dirs ri_names ri_wants ri_names local class_dir esc_name dir curtag tag descr expl - if "ruby${words[1]#ri}" -rrdoc/ri/ri_options -e 1 >/dev/null 2>&1; then - # Old-style Ruby 1.8.x RI - ri_dirs=( ${(f)"$(_call_program ri-names "ruby${words[1]#ri}" -rrdoc/ri/ri_options -e '"o = RI::Options.instance; o.parse(ARGV); o.path.each { |p| puts p }"' -- ${(kv)opt_args[(I)-d|--doc-dir|--(system|site|gems|home)]})"} ) - ri_ext=yaml - elif "ruby${words[1]#ri}" -rrdoc/ri -rrdoc/ri/store -e 1 >/dev/null 2>&1; then - # Newer-style Ruby 1.9.2 RI - ri_dirs=( ${(f)"$(_call_program ri-names "$words[1]" ${(kv)opt_args[(I)-d|--doc-dir|--((no-|)(system|site|gems|home)|standard-docs)]} --list-doc-dirs -f bs -T)"} ) - ri_ext=ri - else - # New-style Ruby 1.9+ RI - ri_dirs=( ${(f)"$(_call_program ri-names "$words[1]" ${(kv)opt_args[(I)-d|--doc-dir|--((no-|)(system|site|gems|home)|standard-docs)]} --list-doc-dirs -f plain -T)"} ) - ri_ext=yaml - fi + ri_dirs=( ${(f)"$(_call_program ri-names "$words[1]" ${(kv)opt_args[(I)-d|--doc-dir|--((no-|)(system|site|gems|home)|standard-docs)]} --list-doc-dirs -f bs -T)"} ) - if compset -P '?*(::|\#|.)'; then + if compset -P '?*(::|:|\#|.)'; then class_dir=${IPREFIX//(::|\#|.)/\/} fi esc_name=${${(Q)PREFIX}//(#b)([^A-Za-z0-9_])/$(printf %%%x ${(qq)match[1]})} case "$IPREFIX" in - (*::) ri_wants=( 'classes:class names' 'class-methods:class methods' );; - (*\#) ri_wants=( 'instance-methods:instance methods' );; - (*.) ri_wants=( 'class-methods:class methods' 'instance-methods:instance methods' );; - (*) ri_wants=( 'classes:class names' ) + (*::) ri_wants=( 'classes:class name' 'class-methods:class method' );; + (*:) ri_wants=( 'docs:documentation file' );; + (*\#) ri_wants=( 'instance-methods:instance method' );; + (*.) ri_wants=( 'class-methods:class method' 'instance-methods:instance method' );; + (*) ri_wants=( 'classes:class name' 'gems:gem' ) esac for curtag in $ri_wants; do @@ -63,27 +52,36 @@ if [[ "$state" = ri-name ]]; then while _tags; do while _next_label "$tag" expl "$descr"; do ri_wants=() + suf=() case "$tag" in + (gems) + ri_wants=( ruby ${${(f)"$(_call_program gems gem${words[1]#ri} list -q --no-versions)"}%% *} ) + suf=( -S : ) + ;; (classes) for dir in $ri_dirs[@]; do ri_wants+=( $dir/$class_dir*(-/:t) ) done + suf=( -S '::' ) ;; (class-methods) for dir in $ri_dirs[@]; do - fnames=( $dir/$class_dir*-c.$ri_ext(-.:t) ) - ri_wants+=( ${${fnames%-c.$ri_ext}//(#b)%(??)/$(print "\\x$match[1]")} ) + fnames=( $dir/$class_dir*-c.ri(-.:t) ) + ri_wants+=( ${${fnames%-c.ri}//(#b)%(??)/$(print "\\x$match[1]")} ) done ;; (instance-methods) for dir in $ri_dirs[@]; do - fnames=( $dir/$class_dir*-i.$ri_ext(-.:t) ) - ri_wants+=( ${${fnames%-i.$ri_ext}//(#b)%(??)/$(print "\\x$match[1]")} ) + fnames=( $dir/$class_dir*-i.ri(-.:t) ) + ri_wants+=( ${${fnames%-i.ri}//(#b)%(??)/$(print "\\x$match[1]")} ) done ;; + (docs) + ri_wants=( ${${(f)"$(_call_program docs $words[1] ${(kv)opt_args[(I)-d|--doc-dir|--((no-|)(system|site|gems|home)|standard-docs)]} $IPREFIX)"}:#=*} ) + ;; esac ri_names=( ${(Q)ri_wants} ) - compadd -S '' -d ri_names -a "$expl[@]" ri_wants && ret=0 + compadd $suf -d ri_names -a "$expl[@]" ri_wants && ret=0 done (( ret )) || break done diff --git a/Completion/Unix/Command/_rm b/Completion/Unix/Command/_rm index e66b77fa4..6dddb5ece 100644 --- a/Completion/Unix/Command/_rm +++ b/Completion/Unix/Command/_rm @@ -47,14 +47,10 @@ case $variant; in darwin*|dragonfly*|freebsd*|netbsd*) args+=( '-W[attempt to undelete named files]' - ) - ;| - dragonfly*|freebsd*|netbsd*) - args+=( "-x[don't cross file systems when removing a hierarchy]" ) ;| - dragonfly*|freebsd*) + darwin*|dragonfly*|freebsd*) args+=( '(-i)-I[prompt when removing many files]' ) diff --git a/Completion/Unix/Command/_route b/Completion/Unix/Command/_route index 95df6d936..f0775a5d2 100644 --- a/Completion/Unix/Command/_route +++ b/Completion/Unix/Command/_route @@ -196,7 +196,7 @@ if [[ -n $state ]]; then if [[ $line[1] = exec ]]; then shift words (( CURRENT-- )) - _normal + _normal -p $service && return elif [[ $line[1] = (flush|monitor) ]]; then sequential=() fi diff --git a/Completion/Unix/Command/_rsync b/Completion/Unix/Command/_rsync index eb906e974..c65266dbd 100644 --- a/Completion/Unix/Command/_rsync +++ b/Completion/Unix/Command/_rsync @@ -141,8 +141,9 @@ _rsync() { '(-X --xattrs)'{-X,--xattrs}'[preserve extended attributes]' \ '--fake-super[use xattrs to save all file attributes]' \ '(-d --dirs)'{-d,--dirs}'[transfer directories without recursing]' \ - {--no-d,--no-dirs}'[turn off --dirs]' \ - "--mkpath[create the destination's path component]" \ + '(--no-d --no-dirs)'{--no-d,--no-dirs}'[turn off --dirs]' \ + '(--old-dirs --old-d)'{--old-dirs,--old-d}'[work like --dirs when talking to old rsync]' \ + "--mkpath[create destination's missing path components]" \ '(-l --links)'{-l,--links}'[copy symlinks as symlinks]' \ {--no-l,--no-links}'[turn off --links]' \ '(-L --copy-links)'{-L,--copy-links}'[transform symlinks into referent file/dir]' \ @@ -161,8 +162,10 @@ _rsync() { '(-g --group)'{-g,--group}'[preserve group]' \ {--no-g,--no-group}'[turn off --group]' \ '(--devices --specials)-D[same as --devices --specials]' \ - '(-D)--devices[preserve devices]' \ + '(-D --copy-devices --write-devices)--devices[preserve devices]' \ '--no-devices[turn off --devices]' \ + '(-D --devices)--copy-devices[copy device contents as a regular file]' \ + '(-D --devices)--write-devices[write to devices as files (implies --inplace)]' \ '(-D)--specials[preserve special files]' \ '--no-specials[turn off --specials]' \ '--no-D[turn off --devices and --specials]' \ @@ -179,7 +182,7 @@ _rsync() { '(-n --dry-run)'{-n,--dry-run}'[show what would have been transferred]' \ '(-W --whole-file)'{-W,--whole-file}'[copy files whole (without delta-transfer algorithm)]' \ {--no-W,--no-whole-file}'[turn off --whole-file]' \ - '(--cc --checksum-choice)'{--cc,--checksum-choice}'=[choose the checksum algorithms]:algorithm:_sequence -n 2 compadd - auto md4 md5 none' \ + '(--cc --checksum-choice)'{--cc,--checksum-choice}'=[choose the checksum algorithms]:algorithm:_sequence -n 2 compadd - auto xxh128 xxh3 xxh64 xxhash md4 md5 sha1 none' \ '(-x --one-file-system)'{-x,--one-file-system}"[don't cross filesystem boundaries]" \ '(-B --block-size)'{-B+,--block-size=}'[force a fixed checksum block-size]: :_numbers -f -u bytes -d 1g "block size" B K M G T P' \ '(-e --rsh)'{-e+,--rsh=}'[specify the remote shell to use]:remote-shell command:(rsh ssh)' \ @@ -233,7 +236,8 @@ _rsync() { '*--include=[do not exclude files matching pattern]:pattern' \ '--files-from=[read list of source-file names from specified file]:file:_files' \ '(-0 --from0)'{-0,--from0}'[all *-from file lists are delimited by nulls]' \ - '(-s --protect-args)'{-s,--protect-args}'[no space-splitting; only wildcard special-chars]' \ + '(-s --secluded-args)'{-s,--secluded-args}'[use the protocol to safely send arguments]' \ + "--trust-sender[trust the remote sender's file list]" \ '--copy-as=[specify user & optional group for the copy]:user:_rsync_users_groups' \ '--version[print version number]' \ '*'{-h,--human-readable}'[output numbers in a human-readable format]' \ @@ -251,6 +255,7 @@ _rsync() { '--list-only[list the files instead of copying them]' \ '--stop-after=[stop copying after specified time has elapsed]:time (minutes)' \ '--stop-at=[stop copying when specified point in time is reached]:date/time (YYYY-MM-DDTHH\:MM):_dates -F -S "T"' \ + '--fsync[fsync every written file]' \ '(--only-write-batch)--write-batch=[write a batched update to the specified file]:file:_files' \ '(--write-batch)--only-write-batch=[like --write-batch but w/o updating destination]:file:_files' \ '--protocol=[force an older protocol version to be used]:number' \ diff --git a/Completion/Unix/Command/_ruby b/Completion/Unix/Command/_ruby index 0e1f5dbc0..9955253b3 100644 --- a/Completion/Unix/Command/_ruby +++ b/Completion/Unix/Command/_ruby @@ -40,38 +40,59 @@ opts=( '(-v)--verbose[turn on verbose mode and disable script from stdin]' '-x-[strip off text before #!ruby line and perhaps cd to directory]:directory:_files -/' '(1 * -)--copyright[print the copyright]' - --{en,dis}'able=[enable or disable features]:feature:(gems did_you_mean rubyopt frozen_string_literal jit all)' + --{en,dis}'able=[enable or disable features]:feature:(gems error_highlight did_you_mean syntax_suggest rubyopt frozen_string_literal mjit yjit all)' \!--{en,dis}able-{gems,rubyopt,all} - '--dump=[dump debug information]:information:_sequence compadd - insns yydebug parsetree parsetree_with_comment' + '--dump=[dump debug information]:information:_sequence compadd - insns insns_without_opt yydebug parsetree parsetree_with_comment' --{external,internal}'-encoding=:charset:->charsets' + '--backtrace-limit=[limit the maximum length of backtrace]:number' '!'{-y,--yydebug} '!--dump=:target:(version copyright usage yydebug syntax parsetree parsetree_with_comment insns)' - '--jit[enable jit with default options]' - '--jit-warnings[enable printing JIT warnings]' - '--jit-debug[enable JIT debugging (very slow)]' - '--jit-wait[wait until JIT compilation finishes every time (for testing)]' - '--jit-save-temps[save JIT temporary files]' - '--jit-verbose=-[print JIT logs of level num or less to stderr]:maximum log level [0]' - '--jit-max-cache=-[specify max number of methods to be JIT-ed in a cache]:number [100]' - '--jit-min-calls=-[specify number of calls to trigger JIT]:calls [10000]' + '(--mjit --yjit)--jit[enable jit for the platform]' + '(--jit --yjit)--mjit[enable C compiler-based JIT compiler]' + '(--jit --mjit)--yjit[enable in-process JIT compiler]' + '--mjit-warnings[enable printing JIT warnings]' + '--mjit-debug[enable JIT debugging (very slow)]' + '--mjit-wait[wait until JIT compilation finishes every time (for testing)]' + '--mjit-save-temps[save JIT temporary files]' + '--mjit-verbose=-[print JIT logs of level num or less to stderr]:maximum log level [0]' + '--mjit-max-cache=-[specify max number of methods to be JIT-ed in a cache]:number [100]' + '--mjit-min-calls=-[specify number of calls to trigger JIT]:calls [10000]' + '--yjit-stat[enable collecting YJIT statistics]' + '--yjit-exec-mem-size=-[size of executable memory block in MiB]:mem size' + '--yjit-call-threshold=-[number of calls to trigger JIT]:number' + '--yjit-max-versions=-[maximum number of versions per basic block]:versions' + '--yjit-greedy-versioning[greedy versioning mode]' ) irb=( '-f[suppress read of ~/.irbrc]' - '(--noinspect)-m[bc mode (load mathn, fraction, matrix)]' $opts[(r)*-d\[*] '(--noinspect)--inspect[use inspect for output]' "(--inspect)--noinspect[don't use inspect for output]" - '(--noreadline)--readline[use readline extension]' - "(--readline)--noreadline[don't use readline extension]" - '(--prompt --prompt-mode --inf-ruby-mode --simple-prompt --noprompt)'{--prompt,--prompt-mode}'[switch prompt mode]:prompt mode:(default simple xmp inf-ruby)' + '(--prompt --prompt-mode --inf-ruby-mode --simple-prompt --noprompt)'{--prompt=,--prompt-mode=}'[switch prompt mode]:prompt mode:(default classic simple inf-ruby xmp null)' '(--prompt --prompt-mode --inf-ruby-mode --simple-prompt --noprompt)'{--inf-ruby-mode,--simple-prompt,--noprompt} '--tracer[display trace for each command execution]' '--back-trace-limit[set limit for backtraces]:limit [16]:' '!--irb_debug:level' '--context-mode:n' + '--extra-doc-dir[add an extra doc dir for the doc dialog]' '(--noecho)--echo[show result]' "(--echo)--noecho[don't show result]" + '(--noecho-on-assignment)--echo-on-assignment[show result on assignment]' + "(--echo-on-assignment)--noecho-on-assignment[don't show result on assignment]" + '--truncate-echo-on-assignment[show truncated result on assignment]' + '(--nomultiline)--multiline[use multiline editor module]' + "(--multiline)--nomultiline[don't use multiline editor module]" + '(--nosingleline)--singleline[use single line editor module]' + "(--singleline)--nosingleline[don't use single line editor module]" + '(--nocolorize)--colorize[use color-highlighting]' + "(--colorize)--nocolorize[don't use color-highlighting]" + '(--noautocomplete)--autocomplete[use auto-completion]' + "(--autocomplete)--noautocomplete[don't use auto-completion]" + '(--regexp-completor)--type-completor[use regexp based completion]' + '(--type-completor)--regexp-completor[use type based completion]' + '(--noscript)--script[script mode]' + '(--script)--noscript[no script mode]' '--single-irb[share self with sub-irb]' '(--noverbose)--verbose[show details]' "(--verbose)--noverbose[don't show details]" @@ -81,8 +102,9 @@ erb=( "-P[don't evaluate lines which start with %]" '-T[specify trim mode]:mode [0]:((0\:EOL\ remains 1\:EOL\ removed\ if\ line\ ends\ with\ %\> 2\:EOL\ removed\ if\ line\ starts\ with\ \<%\ and\ ends\ with\ %\> -\:EOL\ is\ removed\ if\ line\ ends\ with\ -%\>,\ leading\ whitespace\ removed\ after\ \<%-))' '(-d --debug)'{-d,--debug}'[set debugging flags (set $DEBUG to true)]' - '-n[used with -x, prepends line number to output]' - '-x[convert eRuby to Ruby]' + '-n[print ruby script with line number]' + '-x[print ruby script]' + '-v[enable verbose mode]' ) case "$service" in diff --git a/Completion/Unix/Command/_samba b/Completion/Unix/Command/_samba index 6c7a64e18..a36130cf9 100644 --- a/Completion/Unix/Command/_samba +++ b/Completion/Unix/Command/_samba @@ -5,16 +5,29 @@ local -a state line expl msgs args ign (( CURRENT == 2 )) || ign='!' args=( + '--debug-stdout[send debug output to stdout]' '(-d --debuglevel)'{-d+,--debuglevel=}'[set debug level]:debug level (1..10) [1]' '(-s --configfile)'{-s+,--configfile=}'[specify alternate smb.conf file]:config file:_files' '(-l --log-basename)'{-l+,--log-basename=}'[specify base name for log files]:base name:_files' '*--option=[set smb.conf option from command line]:option=value' + '--leak-report[enable talloc leak reporting on exit]' + '--leak-report-full[enable full talloc leak reporting on exit]' "${ign}(1 2 3 -)"{-\?,--help}'[display usage information]' "${ign}(1 2 3 -)--usage[display brief usage information]" "${ign}(1 2 3 - *)"{-V,--version}'[display version information]' ) case $service in + smbclient|nmblookup) + args+=( + '(2 -R --name-resolve)'{-R+,--name-resolve=}'[specify name resolution order]:name resolution order:_values -s " " "name resolution order" lmhosts host wins bcast' + '(-m --max-protocol)'{-m+,--max-protocol=}'[set the max protocol level]:level' + '(2 -O --socket-options)'{-O+,--socket-options=}'[specify socket options]:socket options' + '(2)--netbios-scope=[specify NetBIOS scope]:scope' + '(2 -W --workgroup)'{-W+,--workgroup=}'[specify workgroup name]:workgroup name' + '--realm=[set the realm name]:realm' + ) + ;| smbcontrol) _arguments -C -S $args \ '(-t --timeout)'{-t+,--timeout=}'[set timeout]:timeout (seconds)' \ @@ -42,12 +55,10 @@ case $service in smbclient) args+=( '(-N -A)2: :_guard "^-*" password' - '(2 -R --name-resolve)'{-R+,--name-resolve=}'[specify name resolution order]:name resolution order:_values -s " " "name resolution order" lmhosts host wins bcast' '(2 -M --message -L --list -D --directory -T --tar)'{-M+,--message=}'[send message]:host:_hosts' '(2 -I --ip-address)'{-I+,--ip-address=}'[specify IP address of server]:IP address' '(2 -E --stderr)'{-E,--stderr}'[output messages to stderr]' '(2 -M --message -D --directory -T --tar)'{-L+,--list=}'[list services on server]:host:_hosts' - '(-m --max-protocol)'{-m+,--max-protocol=}'[set the max protocol level]:level' '(2 -T --tar -M --message -L --list)'{-T+,--tar=}'[specify tar options]:tar options' '(2 -D --directory -M --message -L --list)'{-D+,--directory=}'[specify initial directory]:initial directory' '(2 -c --command)'{-c,--command=}'[specify commands]:command string' @@ -58,19 +69,18 @@ case $service in '(-q --quiet)'{-q,--quiet}'[suppress help message]' '(-B --browse)'{-B,--browse}'[browse SMB servers using DNS]' '(2 -d --debuglevel)'{-d+,--debuglevel=}'[specify debug level]:debug level:(0 1 2 3 4 5 6 7 8 9 10)' - '(2 -O --socket-options)'{-O+,--socket-options=}'[specify socket options]:socket options' '(2 -n --netbiosname)'{-n+,--netbiosname=}'[specify local NetBIOS name]:local machine name' - '(2 -W --workgroup)'{-W+,--workgroup=}'[specify workgroup]:workgroup' - '(2 -i --scope)'{-i+,--scope=}'[specify NetBIOS scope]:scope' '(2 -U --user)'{-U+,--user=}'[specify username]:username:_users' '(2 -N --no-pass)'{-N,--no-pass}'[suppress password prompt]' - '(-k --kerberos)'{-k,--kerberos}'[use kerberos (active directory) authentication]' + '--pw-nt-hash[the supplied password is the NT hash]' '(2 -A --authentication-file)'{-A+,--authentication-file=}'[specify file containing username/password]:file:_files' - '(-S --signing)'{-S+,--signing=}'[set the client signing state]:state:(on off required)' '(-P --machine-pass)'{-P,--machine-pass}'[use stored machine account password]' - '(-e --encrypt)'{-e,--encrypt}'[encrypt SMB transport]' - '(-C --use-ccache)'{-C,--use-ccache}'[use the winbind ccache for authentication]' - '--pw-nt-hash[the supplied password is the NT hash]' + '--simple-bind-dn=[specify DN to use for a simple bind]:DN' + '--use-kerberos=[use Kerberos authentication]:state:(desired required off)' + '--use-krb5-ccache=[specify credentials cache location for Kerberos]:file:_files' + '--use-winbind-ccache[use the winbind ccache for authentication]' + '--client-protection=[configure protection used for client connections]:protection:(sign encrypt off)' + '!(--use-kerberos)'{-k,--kerberos} ) (( CURRENT == 2 )) && args+=( '1:service name:_hosts -P // -S /' ) _arguments -s -S $args @@ -81,16 +91,13 @@ case $service in '(-f --flags)'{-f,--flags}'[list NMB flags returned]' \ '(-U --unicast)'{-U+,--unicast=}'[specify unicast address]:unicast address' \ '(-M --master-browser)'{-M,--master-browser}'[search for a master browser]' \ - '(-R --recursion)'{-R,--recursion}'[set recursion desired in packet]' \ + '--recursion[set recursion desired in packet]' \ '(-S --status)'{-S,--status}'[lookup node status as well]' \ '(-T --translate)'{-T,--translate}'[perform reverse DNS on IP addresses]' \ '(-r --root-port)'{-r,--root-port}'[use root port 137]' \ '(-A --lookup-by-ip)'{-A,--lookup-by-ip}'[query node status on IP address]' \ '(-d --debuglevel)'{-d+,--debuglevel=}'[specify debug level]:debug level:(0 1 2 3 4 5 6 7 8 9 10)' \ - '(-O --socket-options)'{-O+,--socket-options=}'[specify socket options to use]:socket option' \ '(-n --netbiosname)'{-n+,--netbiosname=}'[specify primary netbios name]:netbios name' \ - '(-W --workgroup)'{-W+,--workgroup=}'[specify workgroup name]:workgroup name' \ - '(-i --scope)'{-i+,--scope=}'[specify NetBIOS scope]:scope' \ '(h)*:NetBIOS name:_hosts' ;; smbstatus) diff --git a/Completion/Unix/Command/_sccs b/Completion/Unix/Command/_sccs index 4083fe54e..20222a5c1 100644 --- a/Completion/Unix/Command/_sccs +++ b/Completion/Unix/Command/_sccs @@ -1,4 +1,4 @@ -#compdef sccs admin cdc comb delta get help prs prt rmdel sact sccsdiff unget val what +#compdef sccs sccsdiff (( $+functions[_sccs_files] )) || _sccs_files() { diff --git a/Completion/Unix/Command/_scons b/Completion/Unix/Command/_scons index 77fe6dfb0..2e465216c 100644 --- a/Completion/Unix/Command/_scons +++ b/Completion/Unix/Command/_scons @@ -24,14 +24,14 @@ _arguments -s -S \ '(--implicit-cache --implicit-deps-changed)--implicit-deps-changed[rescan dependencies]' \ '(--implicit-cache --implicit-deps-unchanged)--implicit-deps-unchanged[ignore changes to scanned dependencies]' \ '--interactive[start interactive mode]' \ - '(-j --jobs)-'{j,jobs=}'[specify no of jobs to run in parallel]' \ + '(-j --jobs)-'{j,-jobs=}'[specify no of jobs to run in parallel]:number of jobs' \ '(-k --keep-going)-'{k,-keep-going}'[continue after an error]' \ '--max-drift=[set the maximum clock drift]:drift (seconds)' \ '--md5-chunksize=[set chunksize for MD5 signature computation]:size (kB)' \ '(-n --just-print --dry-run --recon)-'{n,-just-print,-dry-run,-recon}"[print commands but don't run them]" \ "--no-site-dir[don't use the usual site_scons directory]" \ '--profile=[profile scons]:output file:_files' \ - '(-q --question)-'{q,question}'[query whether up-to-date]' \ + '(-q --question)-'{q,-question}'[query whether up-to-date]' \ '-Q[suppress progress messages]' \ '--random[build dependencies in random order]' \ '(-s --silent --quiet)-'{s,-silent,-quiet}"[don't print commands]" \ diff --git a/Completion/Unix/Command/_screen b/Completion/Unix/Command/_screen index 6d47d2638..9336ae82d 100644 --- a/Completion/Unix/Command/_screen +++ b/Completion/Unix/Command/_screen @@ -107,7 +107,7 @@ if [[ -n $state ]]; then elif (( CURRENT > 2 )) && [[ ${words[1]} == /dev/* ]]; then _message "no more parameters" else - _normal + _normal -p $service fi ;; attached-sessions) diff --git a/Completion/Unix/Command/_script b/Completion/Unix/Command/_script index 7a3960be0..d38d56f2e 100644 --- a/Completion/Unix/Command/_script +++ b/Completion/Unix/Command/_script @@ -47,7 +47,7 @@ case $OSTYPE in '-q[be quiet: suppress display of starting and ending lines]' '(-a -r -k)-d[suppress sleeps when playing back a session]' '(-a -r -k -t)-p[play back a recorded session]' - '(-d -p)-r[record a session with input, output and timing data]' + '(-d -p -T)-r[record a session with input, output and timing data]' ) ;| netbsd*|openbsd*) @@ -60,7 +60,9 @@ case $OSTYPE in ;| freebsd*) args+=( + '-e[return exit status of the child process]' '-f[use filemon(4)]' + '(-a -r -k -t)-T[play back a recorded session, reporting only timestamps]: :_date_formats' ) ;| darwin*|dragonfly*|freebsd*) @@ -68,11 +70,9 @@ case $OSTYPE in '-F[send output to specified named pipe]:fifo:_files -g "*(p)"' '-t+[specify interval of data flushing]:interval (seconds)' '-k[log keys sent to the program as well as output]' - '*:::arguments: _normal' + '*:::arguments: _normal $service' ) ;| - darwin*|freebsd*) - ;| *) args+=( '(-p -d)-a[append output]' diff --git a/Completion/Unix/Command/_sed b/Completion/Unix/Command/_sed index 79a010c92..ef3aaf2fd 100644 --- a/Completion/Unix/Command/_sed +++ b/Completion/Unix/Command/_sed @@ -104,14 +104,13 @@ else case $OSTYPE in openbsd*|freebsd*|netbsd*|darwin*|dragonfly*) args+=( - '(-r -E)'-E$extended + '(-r -E)'{-E,-r}$extended '-a[delay opening files listed with w function]' ) ;| - openbsd*|freebsd*|netbsd*|dragonfly*) args+=( '(-r -E)'-r$extended ) ;| darwin*|freebsd*|netbsd*|openbsd*|dragonfly*) args+=( '-i+'$inplace ) ;| darwin*|freebsd*|netbsd*|dragonfly*) args+=( '-l[make output line buffered]' ) ;| - freebsd*|dragonfly*) args+=( '-u[disable data buffering]' ) ;| + darwin*|freebsd*|dragonfly*) args+=( '-u[disable data buffering]' ) ;| freebsd*|netbsd*|dragonfly*) args+=( '-I+[edit files in-place, treating all files as a single input stream]:: :_guard "^(*[@/; \\\]*|?(#c6,)|-*)" "suffix for backup"' diff --git a/Completion/Unix/Command/_service b/Completion/Unix/Command/_service index 1216f57a8..28563429b 100644 --- a/Completion/Unix/Command/_service +++ b/Completion/Unix/Command/_service @@ -10,8 +10,11 @@ zstyle -T ":completion:${ctx}" tag-order && \ zstyle ":completion:${ctx}" tag-order init case $OSTYPE in + freebsd<14->.*) + args=( '-E+[set environment variable before executing the rc.d script]:variable:_parameters -g "*export*~*readonly*" -S=' ) + ;& freebsd<11->.*) - args=( '-j+[perform actions in specified jail]:jail:_jails' ) + args+=( '-j+[perform actions in specified jail]:jail:_jails' ) ;& freebsd*|dragonfly*) actions=( diff --git a/Completion/Unix/Command/_split b/Completion/Unix/Command/_split index c5ab0dc9b..5d5afa436 100644 --- a/Completion/Unix/Command/_split +++ b/Completion/Unix/Command/_split @@ -8,7 +8,7 @@ _pick_variant -r variant gnu=GNU $OSTYPE --version args=( '-a+[generate suffixes of specified length]:length [2]' \ - '(-l -p -n)-b+[put specified size in bytes in each output file]:size (bytes)' \ + '(-l -p -n)-b+[put specified size in bytes in each output file]: :_numbers -u bytes size k m g' \ '(-b -p -n)-l+[put specified number of lines/records in each output file]:lines' \ '1:file:_files' \ '2: :_guard "^-*" "prefix [x]"' @@ -19,8 +19,8 @@ case $variant in args=( -C '(H -a --suffix-length)'{-a+,--suffix-length=}'[generate suffixes of specified length]:length [2]' '(H)--additional-suffix=[append an additional suffix to file names]:suffix' - '(H -b --bytes -C --line-bytes -l --lines -n --number)'{-b+,--bytes=}'[put specified size in bytes in each output file]:size (bytes)' - '(H -b --bytes -C --line-bytes -l --lines -n --number)'{-C+,--line-bytes=}'[put whole lines/records up to size limit in each output file]:size (bytes)' + '(H -b --bytes -C --line-bytes -l --lines -n --number)'{-b+,--bytes=}'[put specified size in each output file]: :_numbers -M "m\:{a-zA-Z}={A-Za-z}" -u bytes size {K,M,G,T,P,E,Z}{,B}' \ + '(H -b --bytes -C --line-bytes -l --lines -n --number)'{-C+,--line-bytes=}'[put whole lines/records up to size limit in each output file]: :_numbers -M "m\:{a-zA-Z}={A-Za-z}" -u bytes size {K,M,G,T,P,E,Z}{,B}' '(H --numeric-suffixes -x --hex-suffixes)-d[use numeric suffixes starting at 0]' '(H -d -x --hex-suffixes)--numeric-suffixes=-[use numeric suffixes]::start value [0]' '(H -d --numeric-suffixes --hex-suffixes)-x[use hex suffixes starting at 0]' @@ -39,15 +39,20 @@ case $variant in '(- 1 2)--version[display version information]' ) ;; - (free|net)bsd*) + (free|net)bsd*|darwin*) args+=( '(-b -l -p)-n+[generate specified number of output files]:output files' ) ;| darwin*|freebsd*) args+=( + '-d[use numeric suffixes]' '(-b -l -n)-p+[split the file whenever a line matches specified pattern]:pattern' ) ;| - freebsd*) args+=( '-d[use numeric suffixes]' ) ;; + freebsd*) + args+=( + "-c[continue creating files and don't overwrite existing output files]" + ) + ;; esac _arguments -s -S $args && ret=0 diff --git a/Completion/Unix/Command/_sqlite b/Completion/Unix/Command/_sqlite index 7ef3c6daa..6f0b1de94 100644 --- a/Completion/Unix/Command/_sqlite +++ b/Completion/Unix/Command/_sqlite @@ -12,7 +12,7 @@ dashes=( '' ) options=( '(-init --init)'$^dashes'-init[startup file]:file containing SQLite commands:_files' - $^dashes'-echo[echo commands]' + $^dashes'-echo[print inputs before execution]' ) exclusive=( {,-}-{no,}header ) @@ -55,9 +55,13 @@ options+=( $^dashes'-mmap[set default mmap size]:size' $^dashes'-newline[set output row separator]:separator [\n]' $^dashes'-nofollow[refuse to open symbolic links to database files]' + $^dashes'-nonce[set the safe-mode escape nonce]:string' $^dashes'-pagecache[specify size and number of slots for page cache memory]:size (bytes): :slots' + $^dashes'-pcachetrace[trace all page cache operations]' $^dashes'-readonly[open the database read-only]' + $^dashes'-safe[enable safe-mode]' $^dashes'-stats[print memory stats before each finalize]' + $^dashes'-unsafe-testing[allow unsafe commands and modes for testing]' $^dashes'-vfs[use specified default VFS]:vfs:(unix-dotfile unix-excl unix-none unix-namedsem)' $^dashes'-zip[open the file as a ZIP Archive]' ) @@ -68,12 +72,14 @@ if [[ -n $words[(r)-A*] ]]; then '(1 -a --append -f --file)'{-f+,--file=}'[specify archive file]:archive file:_files' '(1 -a --append -f --file)'{-a,--append=}'[operate on specified file opened using the apndvfs VFS]:archive file:_files' '(-C --directory)'{-C+,--directory=}'[change to specified directory to read/extract files]:directory:_directories' + '(-g --glob)'{-g,--glob}'[use glob matching for names in archive]' '(-n --dryrun)'{-n,--dryrun}'[show the SQL that would have occurred]' '*:file:_files' + '(commands)' \ '(-c --create)'{-c,--create}'[create a new archive]' '(-u --update)'{-u,--update}'[update or add files to an existing archive]' '(-i --insert)'{-i,--insert}'[like -u but always add even if mtime unchanged]' + '(-r --remove)'{-r,--remove}'[remove files from archive]' '(-t --list)'{-t,--list}'[list contents of archive]' '(-x --extract)'{-x,--extract}'[extract files from archive]' ) diff --git a/Completion/Unix/Command/_ssh b/Completion/Unix/Command/_ssh index 2385272f1..5e6e60573 100644 --- a/Completion/Unix/Command/_ssh +++ b/Completion/Unix/Command/_ssh @@ -18,14 +18,18 @@ _ssh () { '*-o+[specify extra options]:option string:->option' ) common_transfer=( + '(-O)-D+[connect directly to a local sftp server]:sftp server path:_command_names -e' '-J+[connect via a jump host]: :->userhost' '-l+[limit used bandwidth]:bandwidth (Kbit/s)' '-P+[specify port on remote host]:port number on remote host' '-p[preserve modification times, access times and modes]' '-q[disable progress meter and warnings]' '-r[recursively copy directories (follows symbolic links)]' - '-S+[specify ssh program]:path to ssh:_command_names -e' \ + '-S+[specify ssh program]:path to ssh:_command_names -e' '-v[verbose mode]' + '(-O)*-X+[specify sftp protocol option]: : _values "sftp option" + "nrequests[set max concurrent SFTP read or write requests]\:requests [64]" + "buffer[set max buffer size for a single SFTP read/write operation]\: \:_numbers -l 0 -m 256K -d 32K -u bytes -f size \:B\:bytes \:K\:kilobytes"' ) algopt='-E+[specify hash algorithm for fingerprints]:algorithm:(md5 sha256)' @@ -53,12 +57,12 @@ _ssh () { "-N[don't execute a remote command]" \ '-n[redirect stdin from /dev/null]' \ '-O+[control an active connection multiplexing master process]:multiplex control command:((check\:"check master process is running" exit\:"request the master to exit" forward\:"request forward without command execution" stop\:"request the master to stop accepting further multiplexing requests" cancel\:"cancel existing forwardings with -L and/or -R" proxy))' \ - '-P[use non privileged port]' \ + '-P+[specify a tag name that may be used to select configuration]:tag' \ '-p+[specify port on remote host]:port number on remote host' \ '(-v)*-q[quiet operation]' \ '*-R+[specify remote port forwarding]:remote port forwarding:->forward' \ '-S+[specify location of control socket for connection sharing]:path to control socket:_files' \ - '-Q+[query parameters]:query option:((cipher\:"supported symmetric ciphers" cipher-auth\:"supported symmetric ciphers that support authenticated encryption" mac\:"supported message integrity codes" kex\:"key exchange algorithms" key\:"key types" key-cert\:"certificate key types" key-plain\:"non-certificate key types" protocol-version\:"supported SSH protocol versions" sig\:"supported signature algorithms" help\:"show supported queries"))' \ + '-Q+[query parameters]:query option:((cipher\:"supported symmetric ciphers" cipher-auth\:"supported symmetric ciphers that support authenticated encryption" compression mac\:"supported message integrity codes" kex\:"key exchange algorithms" kex-gss\:"GSSAPI key exchange algorithms" key\:"key types" key-cert\:"certificate key types" key-plain\:"non-certificate key types" key-sig\:"all key types and signature algorithms" protocol-version\:"supported SSH protocol versions" sig\:"supported signature algorithms" help\:"show supported queries" HostbasedAcceptedAlgorithms HostKeyAlgorithms KexAlgorithms MACs PubkeyAcceptedAlgorithms))' \ '-s[invoke subsystem]' \ '(-t)-T[disable pseudo-tty allocation]' \ "(-T)*-t[force pseudo-tty allocation${tdesc}]" \ @@ -76,7 +80,8 @@ _ssh () { scp) _arguments -C -s \ '-3[copy through local host, not directly between the remote hosts]' \ - '-B[batch mode (don'\''t ask for passphrases)]' \ + "-B[batch mode (don't ask for passwords or passphrases)]" \ + '(-D -X)-O[use the original SCP protocol instead of the SFTP protocol]' \ '-T[disable strict filename checking]' \ '*:file:->file' "$common[@]" "$common_transfer[@]" && ret=0 ;; @@ -95,12 +100,15 @@ _ssh () { '--apple-load-keychain[add identities from keychain]' '--apple-use-keychain[update keychain when adding/removing identities]' ) - _arguments -s : $args \ + _arguments -C -s : $args \ + '-C[process certificates only]' \ '-c[identity is subject to confirmation via SSH_ASKPASS]' \ '-D[delete all identities]' \ '-d[remove identity]' \ $algopt \ '-e+[remove keys provided by the PKCS#11 shared library]:library:_files -g "*.(so|dylib)(|.<->)(-.)"' \ + '*-H[specify a known hosts file to look up hostkeys]:known hosts file:_files' \ + '*-h[constrain keys to specific hosts or destinations]:destination:->destinations' \ '-k[load plain private keys only and skip certificates]' \ '-K[load resident keys from a FIDO authenticator]' \ '-L[list public key parameters of all identities in the agent]'\ @@ -109,14 +117,13 @@ _ssh () { '-M+[specify maximum number of signatures]:number' \ '-S+[use specified library when adding FIDO authenticator-hosted keys]:library:_files' \ '-s+[add keys provided by the PKCS#11 shared library]:library:_files -g "*.(so|dylib)(|.<->)(-.)"' \ - '-t+[set maximum lifetime for identity]:maximum lifetime (in seconds or time format):' \ + '-t+[set maximum lifetime for identity]: :_numbers -u seconds "maximum lifetime" \:s\:seconds m\:minutes h\:hours d\:days w\:weeks' \ "-T[test usability of identity files' private keys]:*:public key file:_files -g '*.pub(-.)'" \ '*-v[verbose mode]' \ '-q[be quiet after a successful operation]' \ '-X[unlock the agent]' \ '-x[lock the agent with a password]' \ - '*:SSH identity file:_files' - return + '*:SSH identity file:_files' && ret=0 ;; ssh-agent) _arguments -s \ @@ -128,9 +135,9 @@ _ssh () { '-k[kill current agent]' \ '(-k)-P[specify PKCS#11 shared library whitelist]:PKCS#11 library whitelist pattern' \ '(-k -c)-s[force sh-style shell]' \ - '-t[set default maximum lifetime for identities]:maximum lifetime (in seconds or time format):' \ + '-t+[set default maximum lifetime for identities]: :_numbers -u seconds "maximum lifetime" \:s\:seconds m\:minutes h\:hours d\:days w\:weeks' \ '-v[verbose mode]' \ - '*::command: _normal' + '*::command: _normal -p $service' return ;; ssh-keygen) @@ -183,15 +190,13 @@ _ssh () { case ${words[arg]#-Y} in ^find-*) sigargs+=( "$p1-n+[specify namespace]:namespace" ) ;| check*|find*|verify) - sigargs+=( "$p1-s+[specify signature file]:signature file:-files" ) + sigargs+=( "$p1-s+[specify signature file]:signature file:_files" ) ;| + match*|verify) sigargs+=( '-I+[specify signer identity]:identity' ) ;| sign) sigargs+=( '*:file:_files' ) ;; verify) args=() - sigargs+=( - '-I+[specify signer identity]:identity' - '-r+[specify revocation file]:revocation file:_files' - ) + sigargs+=( '-r+[specify revocation file]:revocation file:_files' ) ;; esac fi @@ -210,7 +215,7 @@ _ssh () { "(${${(@)cmds:#-p}} -v ${${(@)cms:#-[qt]}})-N+[provide new passphrase]:new passphrase" \ "(${${(@)cmds:#-c}} -v $cms)-C+[provide new comment]:new comment" \ "(-D -I -h -n -V -A)-f+[$file file]:$file file:_files" \ - "$p1(${${(@)cmds:#-[FE]}} ${${(@)cmn:#-v}} ${${(@)cms:#-E}})-l[show fingerprint of key file]" \ + "(${${(@)cmds:#-[FE]}} ${${(@)cmn:#-v}} ${${(@)cms:#-E}})-l[show fingerprint of key file]" \ "$p1(${${(@)cmds:#-[iep]}} $cms)-m+[specify conversion format]:format [RFC4716]:(PEM PKCS8 RFC4716)" \ "$p1*-O+[specify a key/value option]: : _values 'option' $options" \ "(${${(@)cmds:#-[lGT]}} ${${(@)cmn:#-[bv]}} -f)*-v[verbose mode]" \ @@ -235,12 +240,6 @@ _ssh () { "($cmn)-L[print the contents of a certificate]" \ "(${${(@)cmn:#-a}})-A[generate host keys for all key types]" \ "($cmn)-Q[test whether keys have been revoked in a KRL]" \ - "($cmn)-Y+[signature action]:action:(( - find-principals\:find\ the\ principal\ associated\ with\ the\ public\ key\ of\ a\ signature - sign\:sign\ a\ file\ using\ SSH\ key - verify\:verify\ a\ signature\ generated\ using\ the\ sign\ option - check-novalidate\:check\ signature\ structure - ))" \ - finger \ "$p1($cmn)$algopt" \ - create \ @@ -260,6 +259,13 @@ _ssh () { "($cmn -I -h -n -D -O -U -V)-k[generate a KRL file]" \ "$p1($cmn -I -h -n -D -O -U -V)-u[update a KRL]" \ - signature \ + "(${${(@)cmn:#-O}})-Y+[signature action]:action:(( + find-principals\:find\ the\ principal\ associated\ with\ the\ public\ key\ of\ a\ signature + sign\:sign\ a\ file\ using\ SSH\ key + verify\:verify\ a\ signature\ generated\ using\ the\ sign\ option + check-novalidate\:check\ signature\ structure + match-principals\:find\ matching\ principal + ))" \ $sigargs return ;; @@ -271,8 +277,10 @@ _ssh () { '-D[print keys found as SSHFP DNS records]' \ '*-f+[read hosts from file, one per line]:file:_files' \ '-H[hash all hostnames and addresses in the output]' \ + '-O+[specify a key/value option]: : _values option + "hashalg[select a hash algorithm to use with -D]\:algorithm [both]\:(sha1 sha256)"' \ '-p+[specify port on remote host]:port number on remote host' \ - '-T+[specify timeout]:timeout (seconds) [5]' \ + '-T+[specify timeout]: :_numbers -u seconds -d 5 timeout \:s\:seconds m\:minutes h\:hours d\:days w\:weeks' \ '-t+[specify key types to fetch from scanned hosts]:key type:_sequence compadd - rsa dsa ecdsa ed25519' \ '-v[verbose mode]' return @@ -282,7 +290,6 @@ _ssh () { '-a[attempt to continue interrupted transfers]' \ '-B+[specify buffer size]:buffer size (bytes) [32768]' \ '-b+[specify batch file to read]:batch file:_files' \ - '-D+[connect directly to a local sftp server]:sftp server path' \ '-f[request that files be flushed immediately after transfer]' \ '-N[disable implicit quiet mode set by -b]' \ '-R+[specify number of outstanding requests]:number of requests [64]' \ @@ -309,22 +316,37 @@ _ssh () { option) if compset -P 1 '*='; then case "${IPREFIX#-o}" in - (#i)(ciphers|macs|kexalgorithms|hostkeyalgorithms|pubkeyacceptedkeytypes|hostbasedkeytypes)=) - if ! compset -P '[+-]'; then - _wanted prefix expl 'relative to default' compadd - + - && ret=0 + (#i)(ciphers|macs|kexalgorithms|hostkeyalgorithms|pubkeyacceptedalgorithms)=) + local sep + zstyle -s ":completion:${curcontext}:" list-separator sep || sep=-- + if ! compset -P '[+-^]'; then + _wanted prefix expl 'relative to default' compadd -S '' -d \ + "( + +\ $sep\ append\ to\ default\ list + -\ $sep\ remove\ from\ default\ list + ^\ $sep\ insert\ at\ head\ of\ default\ list + )" - + - \^ && ret=0 fi ;; esac case "${IPREFIX#-o}" in - (#i)(afstokenpassing|batchmode|canonicalizefallbacklocal|challengeresponseauthentication|checkhostip|clearallforwardings|compression|enablesshkeysign|exitonforwardfailure|fallbacktorsh|forward(agent|x11)|forwardx11trusted|gatewayports|gssapiauthentication|gssapidelegatecredentials|gssapikeyexchange|gssapirenewalforcesrekey|gssapitrustdns|hashknownhosts|hostbasedauthentication|identitiesonly|kbdinteractiveauthentication|(tcp|)keepalive|nohostauthenticationforlocalhost|passwordauthentication|permitlocalcommand|proxyusefdpass|pubkeyauthentication|rhosts(|rsa)authentication|rsaauthentication|streamlocalbindunlink|usersh|kerberos(authentication|tgtpassing)|useprivilegedport|visualhostkey)=*) + (#i)(batchmode|canonicalizefallbacklocal|checkhostip|clearallforwardings|compression|enableescapecommandline|enablesshkeysign|exitonforwardfailure|fallbacktorsh|forkafterauthentication|forward(agent|x11)|forwardx11trusted|gatewayports|gssapiauthentication|gssapidelegatecredentials|gssapikeyexchange|gssapirenewalforcesrekey|gssapitrustdns|hashknownhosts|hostbasedauthentication|identitiesonly|kbdinteractiveauthentication|tcpkeepalive|nohostauthenticationforlocalhost|passwordauthentication|permitlocalcommand|permitremoteopen|proxyusefdpass|stdinnull|streamlocalbindunlink|visualhostkey)=*) _wanted values expl 'truth value' compadd yes no && ret=0 ;; + (#i)addkeystoagent=*) + _alternative \ + 'timeouts: :_numbers -u seconds "time interval" :s:seconds m:minutes h:hours d:days w:weeks' \ + 'values:value:(yes no ask confirm)' && ret=0 + ;; (#i)addressfamily=*) _wanted values expl 'address family' compadd any inet inet6 && ret=0 ;; (#i)bindaddress=*) _wanted bind-addresses expl 'bind address' _bind_addresses && ret=0 ;; + (#i)bindinterface=*) + _wanted bind-interfaces expl 'bind interface' _network_interfaces && ret=0 + ;; (#i)canonicaldomains=*) _message -e 'canonical domains (space separated)' && ret=0 ;; @@ -340,23 +362,27 @@ _ssh () { (#i)ciphers=*) state=ciphers ;; + (#i)certificatefile=*) + _description files expl 'file' + _files "$expl[@]" && ret=0 + ;; (#i)connectionattempts=*) _message -e 'connection attempts' && ret=0 ;; (#i)connecttimeout=*) - _message -e 'connection timeout' && ret=0 + _numbers -u seconds timeout :s:seconds m:minutes h:hours d:days w:weeks && ret=0 ;; (#i)controlmaster=*) - _wanted values expl 'truthish value' compadd yes no auto autoask && ret=0 + _wanted values expl 'truthish value' compadd yes no auto ask autoask && ret=0 ;; (#i)controlpath=*) _description files expl 'path to control socket' _files "$expl[@]" && ret=0 ;; (#i)controlpersist=*) - _message -e 'timeout' - ret=0 - _wanted values expl 'truth value' compadd yes no && ret=0 + _alternative \ + 'timeouts: :_numbers -u seconds timeout :s:seconds m:minutes h:hours d:days w:weeks' \ + 'values:truth value:(yes no)' && ret=0 ;; (#i)escapechar=*) _message -e 'escape character (or `none'\'')' @@ -377,9 +403,10 @@ _ssh () { (#i)hostname=*) _wanted hosts expl 'real host name to log into' _ssh_hosts && ret=0 ;; - (#i)(hostbasedkeytypes|hostkeyalgorithms|pubkeyacceptedkeytypes)=*) - _wanted key-types expl 'key type' _sequence compadd - $(_call_program key-types ssh -Q key) && ret=0 - ;; + (#i)identityagent=*) + _description files expl 'socket file' + _files -g "*(-=)" "$expl[@]" && ret=0 + ;; (#i)identityfile=*) _description files expl 'SSH identity file' _files "$expl[@]" && ret=0 @@ -410,13 +437,16 @@ _ssh () { _values -s , 'keyboard-interactive authentication method' \ 'bsdauth' 'pam' 'skey' && ret=0 ;; - (#i)(kexalgorithms|gssapikexalgorithms)=*) + (#i)kexalgorithms=*) _wanted algorithms expl 'key exchange algorithm' _sequence compadd - \ $(_call_program algorithms ssh -Q kex) && ret=0 ;; - (#i)localcommand=*) - _description commands expl 'run command locally after connecting' - _command_names && ret=0 + (#i)gssapikexalgorithms=*) + _wanted algorithms expl 'key exchange algorithm' _sequence compadd - \ + $(_call_program algorithms ssh -Q kex-gss) && ret=0 + ;; + (#i)(local|knownhosts)command=*) + _command_names -e && ret=0 ;; (#i)loglevel=*) _values 'log level' QUIET FATAL ERROR INFO VERBOSE\ @@ -429,8 +459,8 @@ _ssh () { _message -e 'number of password prompts' ret=0 ;; - (#i)pkcs11provider=*) - _description files expl 'PKCS#11 shared library' + (#i)(pkcs11|securitykey)provider=*) + _description files expl 'shared library' _files -g '*.(so|dylib)(|.<->)(-.)' "$expl[@]" && ret=0 ;; (#i)port=*) @@ -441,6 +471,17 @@ _ssh () { _values -s , 'authentication method' gssapi-with-mic \ hostbased publickey keyboard-interactive password && ret=0 ;; + (#i)proxyjump=*) + compset -P "* " + state=userhost + ;; + (#i)(hostkey|(hostbased|pubkey)accepted)algorithms=*) + _wanted key-types expl 'key type' _sequence compadd - \ + $(_call_program key-types ssh -Q key-sig) && ret=0 + ;; + (#i)pubkeyauthentication=*) + _wanted values expl 'enable' compadd yes no unbound host-bound && ret=0 + ;; (#i)protocol=*) _values -s , 'protocol version' \ '1' \ @@ -450,7 +491,13 @@ _ssh () { _cmdstring && ret=0 ;; (#i)rekeylimit=*) - _message -e 'maximum number of bytes transmitted before renegotiating session key' + if compset -P "* "; then + _numbers -u seconds "maximum time before renegotiating session key" \ + :s:seconds h:hours d:days w:weeks + else + _numbers -u bytes "maximum amount of data transmitted before renegotiating session key" \ + K:kilobytes M:megabytes G:gigabytes + fi ret=0 ;; (#i)requesttty=*) @@ -460,6 +507,9 @@ _ssh () { 'force[always request a TTY]' \ 'auto[request a TTY when opening a login session]' && ret=0 ;; + (#i)requiredrsasize=) + _wanted sizes expl 'minimum size [1024]' compadd 1024 2048 4096 && ret=0 + ;; (#i)revokedhostkeys=*) _description files expl 'revoked host keys file' _files "$expl[@]" && ret=0 @@ -478,6 +528,9 @@ _ssh () { (#i)streamlocalbindmask=*) _message -e 'octal mask' && ret=0 ;; + (#i)sessiontype=*) + _wanted session-types expl "session type" compadd none subsystem default && ret=0 + ;; (#i)stricthostkeychecking=*) _wanted values expl 'value' compadd yes no ask accept-new off && ret=0 ;; @@ -512,15 +565,18 @@ _ssh () { _description files expl 'xauth program' _files "$expl[@]" -g '*(-*)' && ret=0 ;; + *) _message -e values value ;; esac else - # old options are after the empty "\"-line + # Include, Host and Match not supported from the command-line + # final GSSAPI options are not in upstream but are widely patched in _wanted values expl 'configure file option' \ compadd -M 'm:{a-z}={A-Z} r:[^A-Z]||[A-Z]=* r:|=*' -q -S '=' - \ AddKeysToAgent \ AddressFamily \ BatchMode \ BindAddress \ + BindInterface \ CanonicalDomains \ CanonicalizeFallbackLocal \ CanonicalizeHostname \ @@ -528,7 +584,6 @@ _ssh () { CanonicalizePermittedCNAMEs \ CASignatureAlgorithms \ CertificateFile \ - ChallengeResponseAuthentication \ CheckHostIP \ Ciphers \ ClearAllForwardings \ @@ -539,10 +594,12 @@ _ssh () { ControlPath \ ControlPersist \ DynamicForward \ + EnableEscapeCommandline \ EnableSSHKeysign \ EscapeChar \ ExitOnForwardFailure \ FingerprintHash \ + ForkAfterAuthentication \ ForwardAgent \ ForwardX11 \ ForwardX11Timeout \ @@ -550,19 +607,13 @@ _ssh () { GatewayPorts \ GlobalKnownHostsFile \ GSSAPIAuthentication \ - GSSAPIClientIdentity \ GSSAPIDelegateCredentials \ - GSSAPIKeyExchange \ - GSSAPIRenewalForcesRekey \ - GSSAPIServerIdentity \ - GSSAPITrustDns \ - GSSAPIKexAlgorithms \ HashKnownHosts \ + HostbasedAcceptedAlgorithms \ HostbasedAuthentication \ - HostbasedKeyTypes \ HostKeyAlgorithms \ HostKeyAlias \ - HostName \ + Hostname \ IdentitiesOnly \ IdentityAgent \ IdentityFile \ @@ -571,33 +622,38 @@ _ssh () { KbdInteractiveAuthentication \ KbdInteractiveDevices \ KexAlgorithms \ + KnownHostsCommand \ LocalCommand \ LocalForward \ LogLevel \ + LogVerbose \ MACs \ NoHostAuthenticationForLocalhost \ NumberOfPasswordPrompts \ PasswordAuthentication \ PermitLocalCommand \ + PermitRemoteOpen \ PKCS11Provider \ Port \ PreferredAuthentications \ ProxyCommand \ ProxyJump \ ProxyUseFdpass \ - PubkeyAcceptedKeyTypes \ PubkeyAuthentication \ + PubkeyAcceptedAlgorithms \ RekeyLimit \ RemoteCommand \ RemoteForward \ RequestTTY \ + RequiredRSASize \ RevokedHostKeys \ - RhostsRSAAuthentication \ - RSAAuthentication \ + SecurityKeyProvider \ SendEnv \ ServerAliveCountMax \ ServerAliveInterval \ SetEnv \ + SessionType \ + StdinNull \ StreamLocalBindMask \ StreamLocalBindUnlink \ StrictHostKeyChecking \ @@ -606,24 +662,17 @@ _ssh () { Tunnel \ TunnelDevice \ UpdateHostKeys \ - UsePrivilegedPort \ User \ UserKnownHostsFile \ VerifyHostKeyDNS \ VisualHostKey \ XAuthLocation \ - \ - AFSTokenPassing \ - FallBackToRsh \ - KeepAlive \ - KerberosAuthentication \ - KerberosTgtPassing \ - PreferredAuthentications \ - ProtocolKeepAlives \ - RhostsAuthentication \ - SetupTimeOut \ - SmartcardDevice \ - UseRsh \ + GSSAPIClientIdentity \ + GSSAPIKeyExchange \ + GSSAPIRenewalForcesRekey \ + GSSAPIServerIdentity \ + GSSAPITrustDns \ + GSSAPIKexAlgorithms \ && ret=0 fi ;; @@ -690,9 +739,13 @@ _ssh () { local -a _comp_priv_prefix shift 1 words (( CURRENT-- )) - _normal + _normal -p $service return ;; + destinations) + compset -P 1 '*>' + compset -S '>*' + ;& # fall-through userhost) if compset -P '*@'; then _wanted hosts expl 'remote host name' _ssh_hosts && ret=0 diff --git a/Completion/Unix/Command/_stdbuf b/Completion/Unix/Command/_stdbuf index 4b7d98ba0..32b3cae2f 100644 --- a/Completion/Unix/Command/_stdbuf +++ b/Completion/Unix/Command/_stdbuf @@ -27,6 +27,6 @@ for ((i=1;i<=3;i++)); do "(${short[i]})${long[i]}=${(e)opt}" ) done -(( CURRENT > 2 )) && args+=( '*::command:_normal' ) +(( CURRENT > 2 )) && args+=( '*::command: _normal -p $service' ) _arguments -s -S $args diff --git a/Completion/Unix/Command/_stgit b/Completion/Unix/Command/_stgit deleted file mode 100644 index e31af460a..000000000 --- a/Completion/Unix/Command/_stgit +++ /dev/null @@ -1,52 +0,0 @@ -#compdef stg - -typeset -a subcmds - -subcmds=( ${${${(M)${(f)"$(stg help 2> /dev/null)"}## *}# }/#(#b)([^[:space:]]##)[[:space:]]##(*)/$match[1]:$match[2]} ) - -local curcontext="$curcontext" expl -local subcmd -local ret=1 - -if (( CURRENT == 2 )); then - _describe -t commands 'stgit command' subcmds && ret=0 -else - shift words - (( CURRENT-- )) - subcmd="$words[1]" - curcontext="${curcontext%:*}-${subcmd}:" - - case $subcmd in - (push) - _wanted -V unapplied-patches expl "patch" \ - compadd ${${(M)${(f)"$(stg series 2> /dev/null)"}##- *}#- } \ - && ret=0 - ;; - (pop) - _wanted -V applied-patches expl "patch" \ - compadd ${${(M)${(f)"$(stg series 2> /dev/null)"}##[+>] *}#[+>] } \ - && ret=0 - ;; - (edit|files|goto|rename|log|float|delete|sink|mail|sync|show|pick|hide|squash) - _wanted -V patches expl "patch" \ - compadd $(stg series --noprefix 2> /dev/null) \ - && ret=0 - ;; - (ref*) - last_word="$words[$CURRENT-1]" - refresh_patch_options=( -p --patch ) - if [[ -n ${refresh_patch_options[(r)$last_word]} ]]; then - _wanted -V applied-patches expl "patch" \ - compadd ${${(M)${(f)"$(stg series 2> /dev/null)"}##[+>] *}#[+>] } \ - && ret=0 - else - _files && ret=0 - fi - ;; - (*) - _files && ret=0 - ;; - esac -fi - -return ret diff --git a/Completion/Unix/Command/_strip b/Completion/Unix/Command/_strip index 3e1a6b698..cc67ae49a 100644 --- a/Completion/Unix/Command/_strip +++ b/Completion/Unix/Command/_strip @@ -1,55 +1,68 @@ #compdef strip -local curcontext=$curcontext state line ret=1 +local curcontext=$curcontext state line variant ret=1 declare -A opt_args declare -a args -if _pick_variant gnu=GNU solaris --version; then - if [[ -prefix @* ]]; then - compset -P '@' +if _pick_variant -r variant gnu=GNU elftoolchain=elftoolchain $OSTYPE --version; then + case $variant in + gnu|elftoolchain) + args=( + '(-g -S -d --strip-debug)'{-g,-S,-d,--strip-debug}'[remove debugging symbols]' + '(-I --input-target)'{-I+,--input-target=}'[object code format of input]:bfd name:->bfdnames' + '*'{-K+,--keep-symbol=}'[keep given symbol]:symbol name' + '*'{-N+,--strip-symbol=}'[strip given symbol]:symbol name' + '(-O --output-target)'{-O+,--output-target=}'[object code format of output]:bfd name:->bfdnames' + '(-p --preserve-dates)'{-p,--preserve-dates}'[preserve access and modification dates]' + '*'{-R+,--remove-section=}'[remove given sections]:section name' + '(-s --strip-all)'{-s,--strip-all}'[remove all symbols]' + '(-w --wildcard)'{-w,--wildcard}'[permit wildcards in symbol names]' + '(-X --discard-locals)'{-X,--discard-locals}'[remove compiler-generated local symbols]' + '(-x --discard-all)'{-x,--discard-all}'[remove non-global symbols]' + '--only-keep-debug[remove everything except debugging information]' + '--strip-unneeded[remove symbols not needed for relocation processing]' + '(- 1 *)'{-V,--version}'[display version information and exit]' + ) + ;| + gnu) + if [[ -prefix @* ]]; then + compset -P '@' - local expl + local expl - _description files expl 'command-line-options file' - _files "$expl[@]" - return - fi - args=( - '(-F --target)'{-F+,--target=}'[object code format to use]:bfd name:->bfdnames' - '(-)--help[display usage information]' - '(-)--info[display list of architectures and object formats]' - '(-I --input-target)'{-I+,--input-target=}'[object code format of input]:bfd name:->bfdnames' - '(-O --output-target)'{-O+,--output-target=}'[object code format of output]:bfd name:->bfdnames' - '(-D --enable-deterministic-archives -U --disable-deterministic-archives)'{-U,--disable-deterministic-archives}'[disable -D behavior]' - '(-D --enable-deterministic-archives -U --disable-deterministic-archives)'{-D,--enable-deterministic-archives}'[produce deterministic output when stripping archives (zero file metadata)]' - '*'{-R+,--remove-section=}'[remove given sections]:section name' - '--remove-relocations=[remove relocations from specified section]:section' - '(-s --strip-all)'{-s,--strip-all}'[remove all symbols]' - '(-g -S -d --strip-debug)'{-g,-S,-d,--strip-debug}'[remove debugging symbols]' - '--strip-dwo[remove all DWARF .dwo sections]' - '--strip-unneeded[remove symbols not needed for relocation processing]' - '!(--no-merge-notes)'{-M,--merge-notes} - "--no-merge-notes[don't attempt to remove redundant notes]" - '*'{-K+,--keep-symbol=}'[keep given symbol]:symbol name' - '*'{-N+,--strip-symbol=}'[strip given symbol]:symbol name' - "*--keep-section=[don't strip given section]:section" - '(*)-o+[output file]:output file:_files' - '(-p --preserve-dates)'{-p,--preserve-dates}'[preserve access and modification dates]' - '(-w --wildcard)'{-w,--wildcard}'[permit wildcards in symbol names]' - '(-x --discard-all)'{-x,--discard-all}'[remove non-global symbols]' - '(-X --discard-locals)'{-X,--discard-locals}'[remove compiler-generated local symbols]' - '--keep-file-symbols[retain symbols specifying source file names]' - '--only-keep-debug[remove everything except debugging information]' - '(-)'{-V,--version}'[display version information and exit]' - '(-v --verbose)'{-v,--verbose}'[list all object files modified or members of archives]') -else - case $OSTYPE in + _description files expl 'command-line-options file' + _files "$expl[@]" + return + fi + args+=( + '(-F --target)'{-F+,--target=}'[object code format to use]:bfd name:->bfdnames' + '(-)--help[display usage information]' + '(-)--info[display list of architectures and object formats]' + '(-D --enable-deterministic-archives -U --disable-deterministic-archives)'{-U,--disable-deterministic-archives}'[disable -D behavior]' + '(-D --enable-deterministic-archives -U --disable-deterministic-archives)'{-D,--enable-deterministic-archives}'[produce deterministic output when stripping archives (zero file metadata)]' + '--remove-relocations=[remove relocations from specified section]:section' + '--strip-dwo[remove all DWARF .dwo sections]' + '!(--no-merge-notes)'{-M,--merge-notes} + "--no-merge-notes[don't attempt to remove redundant notes]" + "*--keep-section=[don't strip given section]:section" + '(*)-o+[output file]:output file:_files' + '--keep-section-symbols[retain section symbols]' + '--keep-file-symbols[retain symbols specifying source file names]' + '(-v --verbose)'{-v,--verbose}'[list all object files modified or members of archives]') + ;; + elftoolchain) + args+=( + '(- 1 *)'{-h,--help}'[display usage information]' + '(*)'{-o+,--output-file=}'[specify output file]:output file:_files' + ) + ;; solaris*) args=( '-l[strip line information only]' '-V[display version information on stderr and exit]' - '-x[do not strip the symbol table]') - ;; + '-x[do not strip the symbol table]' + ) + ;; darwin*) local -a arch arch=( ${(z)${${"$(_call_program architectures @@ -73,12 +86,13 @@ else '-no_uuid[remove only LC_UUID load command]' '-no_split_info[remove LC_SEGMENT_SPLIT_INFO load command]' '-no_code_signature_warning[not warn when code signature would be invalid in the output]' - '-arch[specify the architecture]:architecture:( $arch )' ) - ;; + '-arch[specify the architecture]:architecture:( $arch )' + ) + ;; esac fi -_arguments \ +_arguments -C \ $args \ '1:executable:_files -g "*(-*)"' \ '*::executable:_files -g "*(-*)"' && ret=0 diff --git a/Completion/Unix/Command/_subversion b/Completion/Unix/Command/_subversion index 8fc46a292..ccaf310fa 100644 --- a/Completion/Unix/Command/_subversion +++ b/Completion/Unix/Command/_subversion @@ -139,7 +139,7 @@ _svn () { ;; (commit) args=( - ${args/(#b)(*--file*):arg:/$match[1]:file:_files} + ${args/(#b)(*--file*):arg:/${match[1]}:file:_files} '*:file: _svn_modified "committable"' ) ;; @@ -189,7 +189,7 @@ _svn () { args=( ':propname:(svn:ignore svn:keywords svn:executable svn:eol-style svn:mime-type svn:externals svn:needs-lock svn:global-ignores svn:auto-props)' ':propval:->propset_propval' - ${args/(#b)(*--file*):arg:/$match[1]:file:_files} + ${args/(#b)(*--file*):arg:/${match[1]}:file:_files} '*:path or url: _alternative "files:file:_files" "urls:URL:_svn_urls"' ) ;; @@ -318,6 +318,9 @@ _svnadmin () { # Test cases: # svnadmin freeze . rsync --<TAB> offers --file # svnadmin freeze -- . rsync -<TAB> offers rsync's options + # svnadmin freeze . -- rsync -<TAB> should do the same (but currently doesn't) + # + # TODO: Fix the third case. # # Note: the NORMARG calculations here include one positional argument # (the '.') before the command. diff --git a/Completion/Unix/Command/_sudo b/Completion/Unix/Command/_sudo index 29e5e6d75..c334c6765 100644 --- a/Completion/Unix/Command/_sudo +++ b/Completion/Unix/Command/_sudo @@ -1,9 +1,7 @@ #compdef sudo sudoedit -setopt localoptions extended_glob - -local environ e cmd cpp -local -a args _comp_priv_prefix +local curcontext="$curcontext" environ e cmd cpp ret=1 +local -a context state line args _comp_priv_prefix local -A opt_args zstyle -a ":completion:${curcontext}:" environ environ @@ -20,20 +18,21 @@ args=( '(-g --group)'{-g+,--group=}'[run command as the specified group name or ID]:group:_groups' '(-)'{-h,--help}'[display help message and exit]' '(-h --host)'{-h+,--host=}'[run command on host]:host:_hosts' - '(-K --remove-timestamp)'{-K,--remove-timestamp}'[remove timestamp file completely]' - '(-k --reset-timestamp)'{-k,--reset-timestamp}'[invalidate timestamp file]' + '(-k --reset-timestamp -K --remove-timestamp -N --no-update)'{-K,--remove-timestamp}'[remove timestamp file completely]' + '(-k --reset-timestamp -K --remove-timestamp -N --no-update)'{-k,--reset-timestamp}'[invalidate timestamp file]' \*{-l,--list}"[list user's privileges or check a specific command]" '(-n --non-interactive)'{-n,--non-interactive}'[non-interactive mode, no prompts are used]' + '(-k --reset-timestamp -K --remove-timestamp -N --no-update)'{-N,--no-update}"[don't update user's cached credentials]" '(-p --prompt)'{-p+,--prompt=}'[use the specified password prompt]:prompt' '(-R --chroot)'{-R+,--chroot=}'[change the root directory before running command]:directory:_directories' '(-r --role)'{-r+,--role=}'[create SELinux security context with specified role]: :_selinux_roles' '(-S --stdin)'{-S,--stdin}'[read password from standard input]' '(-t --type)'{-t+,--type=}'[create SELinux security context with specified type]: :_selinux_types' '(-T --command-timeout)'{-T+,--command-timeout=}'[terminate command after specified time limit]:timeout' - '(-U --other-user)'{-U+,--other-user=}'[in list mode, display privileges for user]:user:_users' + '(-U --other-user -v --validate)'{-U+,--other-user=}'[in list mode, display privileges for user]:user:_users' '(-u --user)'{-u+,--user=}'[run command (or edit file) as specified user]:user:_users' '(-)'{-V,--version}'[display version information and exit]' - '(-v --validate)'{-v,--validate}"[update user's timestamp without running a command]" + '(-v --validate -U --other-user *)'{-v,--validate}"[update user's timestamp without running a command]" ) # Does -e appears before the first word that doesn't begin with a hyphen? @@ -45,10 +44,6 @@ if [[ $service = sudoedit ]] || (( $words[(i)-e] < $words[(i)^(*sudo|-[^-]*)] )) args=( -A "-*" $args '!(-V --version -h --help)-e' '*:file:_files' ) else cmd="$words[1]" - cpp='_comp_priv_prefix=( - $cmd -n - ${(kv)opt_args[(I)(-[ugHEP]|--(user|group|set-home|preserve-env|preserve-groups))]} - )' args+=( '(-e --edit 1 *)'{-e,--edit}'[edit files instead of running a command]' \ '(-s --shell)'{-s,--shell}'[run shell as the target user; a command may also be specified]' \ @@ -58,9 +53,40 @@ else '(-E -i --login -s --shell -e --edit)--preserve-env=-[preserve user environment when running command]::environment variable:_sequence _parameters -g "*export*"' \ '(-H --set-home -i --login -s --shell -e --edit)'{-H,--set-home}"[set HOME variable to target user's home dir]" \ '(-P --preserve-groups -i -login -s --shell -e --edit)'{-P,--preserve-groups}"[preserve group vector instead of setting to target's]" \ - "(-)1: :{ $cpp; _command_names -e }" - "*:: :{ $cpp; _normal }" + '*:: :->normal' + ) +fi + +_arguments -s -S $args && ret=0 + +if [[ $state = normal ]]; then + _comp_priv_prefix=( + $cmd -n + ${(kv)opt_args[(I)(-[ugHEP]|--(user|group|set-home|preserve-env|preserve-groups))]} ) + if (( $+opt_args[-l] || $+opt_args[--list] )); then + _normal -p $service + return + fi + while [[ $words[1] = *=* ]]; do + if (( CURRENT == 1 )); then + compstate[parameter]="${PREFIX%%\=*}" + compset -P 1 '*=' + _value && ret=0 + return ret + fi + shift words + (( CURRENT-- )) + done + if (( CURRENT == 1 )); then + curcontext="${curcontext%:*:*}:-command-:" + _alternative \ + 'commands:: _command_names -e' \ + 'options:option:(-s --shell -l --login)' \ + 'parameters: :_parameters -g "*export*~*readonly*" -qS=' && ret=0 + else + _normal + fi fi -_arguments -s -S $args +return ret diff --git a/Completion/Unix/Command/_sysctl b/Completion/Unix/Command/_sysctl index 0416ca05e..442953c4d 100644 --- a/Completion/Unix/Command/_sysctl +++ b/Completion/Unix/Command/_sysctl @@ -28,6 +28,12 @@ case $OSTYPE in '(- :)'{-V,--version}'[display version info and exit]' \ '*:sysctl variable:_files -W /proc/sys' ;; + freebsd<14->.*) + args+=( + '-F[print the format of the variable]' + '(-N)-l[show the length of variables along with their values]' + ) + ;| freebsd<11->.*) args+=( '-B[specify buffer size for reading]:buffer size' @@ -53,7 +59,7 @@ case $OSTYPE in '-d[print the description of the variable instead of its value]' \ '(-N -n)-e[separate name and value with =]' \ "-i[silently exit if variable doesn't exist]" \ - '(-n)-N[show only variable names]' \ + '(-n -l)-N[show only variable names]' \ '(-N)-n[show only variable values]' \ '(-x)-o[show opaques as well (values suppressed)]' \ '-q[suppress some warnings]' \ diff --git a/Completion/Unix/Command/_tail b/Completion/Unix/Command/_tail index e54a0b06e..f8006abbc 100644 --- a/Completion/Unix/Command/_tail +++ b/Completion/Unix/Command/_tail @@ -16,6 +16,7 @@ if _pick_variant gnu=GNU unix --version; then '(-q --quiet --silent -v --verbose)'{-q,--quiet,--silent}'[never output headers giving file names]' '(-q --quiet --silent -v --verbose)'{-v,--verbose}'[always output headers giving file names]' '--retry[keep trying to open a file even when it becomes inaccessible]' + '(-z --zero-terminated)'{-z,--zero-terminated}'[line delimiter is NUL, not newline]' '(- *)--help[display help and exit]' '(- *)--version[output version information and exit]' ) diff --git a/Completion/Unix/Command/_tar b/Completion/Unix/Command/_tar index f9901c0c9..1cabd9713 100644 --- a/Completion/Unix/Command/_tar +++ b/Completion/Unix/Command/_tar @@ -158,7 +158,7 @@ elif [[ ( "$_tar_cmd" = *[xt]* || -n $del ) && -n "$tf" ]]; then fi if [[ $tf != $_tar_cache_name && -f $tf ]]; then - _tar_cache_list=("${(@f)$($words[1] $largs $tf)}") + _tar_cache_list=("${(@f)$($words[1] ${words[(r)--force-local]} $largs $tf)}") _tar_cache_name=$tf fi diff --git a/Completion/Unix/Command/_tex b/Completion/Unix/Command/_tex index f1428c494..1a70b5058 100644 --- a/Completion/Unix/Command/_tex +++ b/Completion/Unix/Command/_tex @@ -1,4 +1,4 @@ -#compdef tex latex slitex pdftex pdflatex jadetex pdfjadetex xetex=tex xelatex=latex latexmk +#compdef tex latex slitex pdftex pdflatex jadetex pdfjadetex xetex=tex xelatex=latex latexmk lualatex _arguments : \ '-enc[enable encTeX extensions]' \ diff --git a/Completion/Unix/Command/_tiff b/Completion/Unix/Command/_tiff index ef12777de..1aeff3ff7 100644 --- a/Completion/Unix/Command/_tiff +++ b/Completion/Unix/Command/_tiff @@ -159,6 +159,7 @@ tiffinfo) '-f+[force fill order]:fill order:(lsb2msb msb2lsb)' \ '-w[display raw data in words]' \ '-z[enable strip chopping]' \ + '-M+[set the memory allocation limit]:limit (MiB), 0 for unlimited' \ '*:input TIFF file:_files -g "*.(#i)tif(|f)(-.)"' && ret=0 ;; tiffmedian) @@ -172,6 +173,7 @@ tiffmedian) ;; tiffsplit) _arguments \ + '-M+[set the memory allocation limit]:limit (MiB), 0 for unlimited' \ ':input file:_files -g "*.(#i)tif(|f)(-.)"' \ ':output file prefix' && ret=0 ;; diff --git a/Completion/Unix/Command/_timeout b/Completion/Unix/Command/_timeout index c041283ac..9c7f1a004 100644 --- a/Completion/Unix/Command/_timeout +++ b/Completion/Unix/Command/_timeout @@ -17,4 +17,4 @@ _arguments -S -A "-" $args \ '(-s --signal)'{-s,--signal}'[specify the signal to send on timeout]:signal:_signals' \ '(-k --kill-after)'{-k,--kill-after}'[followup first signal with SIGKILL if command persists after specified time]:time' \ '1: :_numbers -f -u seconds duration :s:seconds m:minutes h:hours d:days' \ - '*:::command:_normal' + '*:::command: _normal -p $service' diff --git a/Completion/Unix/Command/_tmux b/Completion/Unix/Command/_tmux index 844af58fc..b9c220f17 100644 --- a/Completion/Unix/Command/_tmux +++ b/Completion/Unix/Command/_tmux @@ -130,6 +130,8 @@ _tmux_aliasmap=( popup display-popup # buffers + clearphist clear-prompt-history + showphist show-prompt-history clearhist clear-history deleteb delete-buffer lsb list-buffers @@ -143,7 +145,6 @@ _tmux_aliasmap=( if if-shell lock lock-server run run-shell - info server-info wait wait-for ) @@ -267,6 +268,11 @@ _tmux-clear-history() { _arguments '-t+[specify target pane]:pane:__tmux-panes' } +_tmux-clear-prompt-history() { + [[ -n ${tmux_describe} ]] && print "remove history of values for command line prompts" && return + _arguments '-T+[specify prompt type]:prompt type:(command search target window-target)' +} + _tmux-clock-mode() { [[ -n ${tmux_describe} ]] && print "enter clock mode" && return _arguments '-t+[specify target pane]:pane:__tmux-panes' @@ -282,8 +288,7 @@ _tmux-command-prompt() { '-I+[specify list of initial inputs]:initial-text (comma-separated list)' \ '-p+[specify list of prompts]:prompts (comma-separated list)' \ '-t+[specify target client]:client:__tmux-clients' \ - '(-W)-T[prompt is for a target - tab complete as appropriate]' \ - '(-T)-W[prompt is for a window - tab complete as appropriate]' \ + '-T+[specify prompt type]:prompt type:(command search target window-target)' \ '*:::template:= _tmux' } @@ -388,13 +393,19 @@ _tmux-display-panes() { _tmux-display-popup() { [[ -n ${tmux_describe} ]] && print "display a popup box over a pane" && return _arguments -s \ + "-B[don't surround the popup by a border]" \ '-C[close any popup on the client]' \ '-c+[specify target client]:client:__tmux-clients' \ '-d+[specify working directory for the command]:directory:_directories' \ + '*-e[specify environment variable]:environment variable:_parameters -g "*export*" -qS=' \ '-E[close the popup when the command exits]' \ + '(-E)-EE[only close the popup when the command exits successfully]' \ '-w+[specify width]:width' \ '-h+[specify height]:height' \ + '-s+[specify the style for the popup]:style:__tmux-style' \ + '-S+[specify the style for the popup border]:style:__tmux-style' \ '-t+[specify target pane]:pane:__tmux-panes' \ + '-T+[specify popup title (supports formats)]:format:__tmux-formats' \ '-x+[specify horizontal position]:position' \ '-y+[specify vertical position]:position' \ ':shell command:_cmdstring' @@ -865,7 +876,11 @@ _tmux-send-prefix() { '-t+[specify target pane]:pane:__tmux-panes' } -_tmux-server-info() { +# NOTE: this is actually an alias for "show-messages -JT", but until the +# aliasmap system in check-tmux-state can properly handle aliases which are +# more complex than a single word, it's best to leave this here. + +_tmux-server-access() { [[ -n ${tmux_describe} ]] && print "show server information" && return __tmux-nothing-else } @@ -1041,6 +1056,11 @@ _tmux-show-options() { return ret } +_tmux-show-prompt-history() { + [[ -n ${tmux_describe} ]] && print "show status prompt history" && return + _arguments '-T+[specify prompt type]:prompt type:(command search target window-target)' +} + _tmux-show-window-options() { [[ -n ${tmux_describe} ]] && print "show window options" && return local curcontext="$curcontext" state line ret=1 @@ -1530,7 +1550,6 @@ function __tmux-option-guard() { 'status-right-style:__tmux-style' 'status-style:__tmux-style' 'update-environment:MSG:string listing env. variables' - 'user-keys:MSG:key' 'visual-activity:DESC:on off' 'visual-bell:DESC:on off' 'visual-silence:DESC:on off' @@ -1549,6 +1568,7 @@ function __tmux-option-guard() { 'message-limit:'${int_guard} 'set-clipboard:DESC:on off' 'terminal-overrides:MSG:overrides string' + 'user-keys:MSG:key' ) else options=( @@ -1633,6 +1653,7 @@ function __tmux-session-options() { 'lock-after-time:lock sessions after N seconds' 'lock-command:command to run for locking a client' 'message-command-style:status line message command style' + 'message-line:status message and command prompt position' 'message-style:status line message style' 'mouse:enable mouse support' 'prefix:primary prefix key' @@ -1643,6 +1664,8 @@ function __tmux-session-options() { 'set-titles-string:format used by set-titles' 'silence-action:set action on window silence when monitor-silence is on' 'status:show or hide the status bar' + 'status-bg:set the background style used by the status bar' + 'status-fg:set the foreground style used by the status bar' 'status-format:specify the format to be used for each line of the status line' 'status-interval:interval (in seconds) for status bar updates' 'status-justify:position of the window list in status bar' @@ -1656,7 +1679,6 @@ function __tmux-session-options() { 'status-right-style:style of right part of status line' 'status-style:style status line' "update-environment:list of variables to be copied to a session's environment" - 'user-keys:set list of user-defined key escape sequences' 'visual-activity:display status line messages upon activity' 'visual-bell:use visual bell instead of audible' 'visual-silence:print a message if monitor-silence is on' @@ -1701,20 +1723,28 @@ function __tmux-panes() { fi } + function __tmux-server-options() { local -a tmux_server_options tmux_server_options=( + 'backspace:set key sent by tmux for backspace' 'buffer-limit:number of buffers kept per session' 'command-alias:custom command aliases' + 'copy-command:specify the default command when "copy-pipe" is called without arguments' 'default-terminal:default terminal definition string' 'escape-time:set timeout to detect single escape characters (in msecs)' + 'editor:specify the command used when tmux runs an editor' 'exit-unattached:make server exit if it has no attached clients' 'exit-empty:exit when there are no active sessions' + 'extended-keys:control whether tmux will send extended keys through to the terminal' 'focus-events:request focus events from terminal' 'history-file:tmux command history file name' 'message-limit:set size of message log per client' + 'prompt-history-limit:set the number of history items to save in the history file' 'set-clipboard:use esc sequences to set terminal clipboard' + 'terminal-features:set terminal features not detected by terminfo' 'terminal-overrides:override terminal descriptions' + 'user-keys:set list of user-defined key escape sequences' ) _describe -t tmux-server-options 'tmux server option' tmux_server_options } @@ -1768,14 +1798,25 @@ function __tmux-window-options() { local -a tmux_window_options tmux_window_options=( 'aggressive-resize:aggressively resize windows' + 'allow-passthrough:allow programs in the pane to bypass tmux' 'allow-rename:allow programs to change window titles' 'alternate-screen:allow alternate screen feature to be used' - 'automatic-rename:attempt to automatically rename windows' 'automatic-rename-format:format for automatic renames' + 'automatic-rename:attempt to automatically rename windows' 'clock-mode-colour:set clock colour' 'clock-mode-style:set clock hour format (12/24)' + 'copy-mode-current-match-style:set the style of the current search match in copy mode' + 'copy-mode-mark-style:set the style of the line containing the mark in copy mode' + 'copy-mode-match-style:set the style of search matches in copy mode' + 'cursor-colour:set the colour of the cursor' + 'cursor-style:set the style of the cursor' + 'fill-character:set the character used to fill unused window areas' 'main-pane-height:set height for main-* layouts' 'main-pane-width:set width for main-* layouts' + 'menu-style:set the menu style' + 'menu-selected-style:set the selected menu item style' + 'menu-border-style:set the menu border style' + 'menu-border-lines:set the type of characters used for drawing menu borders' 'mode-keys:mode to use in copy and choice modes (vi/emacs)' 'mode-style:set window modes style' 'monitor-activity:monitor window activity' @@ -1786,11 +1827,20 @@ function __tmux-window-options() { 'pane-active-border-style:style of border of active pane' 'pane-base-index:integer at which to start indexing panes' 'pane-border-format:set pane border format string' + 'pane-border-indicators:set the indicator style for the active pane in a two pane split' + 'pane-border-lines:set the type of characters used for drawing pane borders' 'pane-border-status:turn border status off or set its position' 'pane-border-style:style of border pane' + "pane-colours:an array used to configure tmux's colour palette" + 'popup-border-lines:set the type of line used to draw popup borders' + "popup-border-style:set the style for the popup's border" + 'popup-style:set the popup style' "remain-on-exit:don't destroy windows after the program exits" + "remain-on-exit-format:set the text shown at bottom of exited panes" + 'scroll-on-clear:scroll previous contents into history before clear' 'synchronize-panes:send input to all panes of a window' 'window-active-style:style of active window' + 'window-size:indicate how to automatically size windows' 'window-status-activity-style:style of status bar activity tag' 'window-status-bell-style:style of status bar bell tag' 'window-status-current-format:set status line format for active window' @@ -1799,7 +1849,6 @@ function __tmux-window-options() { 'window-status-last-style:style of last window in status bar' 'window-status-separator:separator drawn between windows in status line' 'window-status-style:general status bar style' - 'window-size:indicate how to automatically size windows' 'window-style:style of window' 'wrap-search:search wrap around at the end of a pane' 'xterm-keys:generate xterm-style function key sequences' diff --git a/Completion/Unix/Command/_todo.sh b/Completion/Unix/Command/_todo.sh index 99b6bb695..fc84ee076 100644 --- a/Completion/Unix/Command/_todo.sh +++ b/Completion/Unix/Command/_todo.sh @@ -74,7 +74,7 @@ case $state in "replace:replace in NUMBER the TEXT." "remdup:remove exact duplicates from todo.txt." "report:adds the number of open and done items to report.txt." - "showhelp:list the one-line usage of all built-in and add-on actions." + "shorthelp:list the one-line usage of all built-in and add-on actions." ) _describe -t todo-commands 'todo.sh command' cmdlist ;; @@ -97,7 +97,7 @@ case $state in ;; (replace) item=${words[CURRENT-1]##0##} - compadd -Q -- "${(qq)$(todo.sh -p list "^[ 0]*$item " | sed '/^--/,$d')##<-> (\([A-Z]\) |)}" + compadd -Q -- "${(qq)$(todo.sh -p command list "^[ 0]*$item " | sed '/^--/,$d')##<-> (\([A-Z]\) |)}" ;; esac fi @@ -144,7 +144,7 @@ case $nextstate in ;; (item) - itemlist=(${${(M)${(f)"$(todo.sh -p list | sed '/^--/,$d')"}##<-> *}/(#b)(<->) (*)/${match[1]}:${match[2]}}) + itemlist=(${${(M)${(f)"$(todo.sh -p command list | sed '/^--/,$d')"}##<-> *}/(#b)(<->) (*)/${match[1]}:${match[2]}}) _describe -t todo-items 'todo item' itemlist ;; @@ -173,6 +173,6 @@ case $nextstate in # the + or @ (which may not even be there yet). compset -P '*[[:space:]]' _wanted search expl $projmsg \ - compadd $(todo.sh lsprj) $(todo.sh lsc) + compadd $(todo.sh command listproj) $(todo.sh command listcon) ;; esac diff --git a/Completion/Unix/Command/_touch b/Completion/Unix/Command/_touch index 9b9144756..47190c579 100644 --- a/Completion/Unix/Command/_touch +++ b/Completion/Unix/Command/_touch @@ -28,7 +28,7 @@ case $variant in darwin*|dragonfly*|freebsd*|netbsd*) args+=( '-h[act on symbolic links themselves]' ) ;| - dragonfly*|freebsd*|openbsd*|solaris*) + darwin*|dragonfly*|freebsd*|openbsd*|solaris*) args+=( '(-r -t 1)-d+[use specified date/time]:date/time' ) ;| darwin*|dragonfly*|freebsd*|netbsd*|solaris*) diff --git a/Completion/Unix/Command/_tr b/Completion/Unix/Command/_tr index 1cfe1200a..6d899431c 100644 --- a/Completion/Unix/Command/_tr +++ b/Completion/Unix/Command/_tr @@ -16,6 +16,7 @@ case $variant in '(-c -C --complement)'{-c,-C,--complement}"${descr[-c]}" '(-d --delete 2)'{-d,--delete}"${descr[-d]}" '(-s --squeeze-repeats)'{-s,--squeeze-repeats}"${descr[-s]}" + '(-t --truncate-set1)'{-t,--truncate-set1}'[first truncate ARRAY1 to length of ARRAY2]' '(- 1 2)--help[display help information]' '(- 1 2)--version[display version information]' ) diff --git a/Completion/Unix/Command/_trash b/Completion/Unix/Command/_trash new file mode 100644 index 000000000..bef6e5838 --- /dev/null +++ b/Completion/Unix/Command/_trash @@ -0,0 +1,57 @@ +#compdef trash + +local variant + +_pick_variant -r variant ali='(Rantakari|hasseg)' steven='(Steven|vanZyl)' other --version + +case $variant in + ali) + # The hidden options here are options to rm that trash silently (and + # undocumentedly) ignores. Some options are not made mutually exclusive where + # they technically could be, for compatibility with aliases, etc. + _arguments -s -S -A '-*' : \ + '!-'{d,f,i,r,P,R,W} \ + '(: * -F -l -v)-e[empty trash]' \ + '-F[use Finder instead of system API]' \ + '(: * -e -F -s -y)-l[list items in trash]' \ + '(: * -F -l -v)-s[securely empty trash]' \ + '-v[increase output verbosity]' \ + '-y[skip confirmation prompts (with -e or -s)]' \ + '*: :_files' + return + ;; + steven) + local trash_dir="${TRASH_D_DIR:-${XDG_DATA_HOME:-$HOME/.local/share}/Trash}/files" + + local -a args=( + '(-v --verbose)'{-v,--verbose}'[print more information]' + + + options + '(-d --dir)'{-d,--dir}'[remove empty directories]' + '(-r -R --recursive)'{-r,-R,--recursive}'[delete directories and their contents]' + '--rm[permanently delete files]' + + + '(interactive)' + {-i,--interactive}'[ask before each deletion]' + {-I,--interactive-once}'[ask before deleting 3 or more files, or deleting recursively]' + {-f,--force}'[don'\''t prompt and ignore errors]' + + + '(actions)' + '(options input info interactive)--list[list out the files in the trash]' + '(options input info interactive)--orphans[list orphaned files in the trash]' + '(options input info)--restore[restore specified file from the trash]:trashed file:_files -W "$trash_dir"' + '(options input info)--delete[delete specified file from the trash]:trashed file:_files -W "$trash_dir"' + '(options input info)--empty[empty the trash bin]' + + + info + '(- *)'{-h,--help}'[display help information]' + '(- *)--version[output the version and exit]' + + + input + '(actions)*: :_files' + ) + _arguments -s -S : $args + return + ;; + *) _default ;; +esac diff --git a/Completion/Unix/Command/_truss b/Completion/Unix/Command/_truss index b798f03cb..b69e174e6 100644 --- a/Completion/Unix/Command/_truss +++ b/Completion/Unix/Command/_truss @@ -16,7 +16,11 @@ args=( case $OSTYPE in solaris2.<11->) - args+=( '(-c)-A[include absolute timestamps in output]' ) + args+=( + '(-c)-A[include absolute timestamps in output]' + '-I[interpret system calls to well-known rather than underlying names]' + '-N[report only system calls that returned an error]' + ) ;| aix*|solaris*) args+=( diff --git a/Completion/Unix/Command/_uniq b/Completion/Unix/Command/_uniq index e123a94cd..479b3848d 100644 --- a/Completion/Unix/Command/_uniq +++ b/Completion/Unix/Command/_uniq @@ -25,7 +25,7 @@ if ! _pick_variant gnu=Free\ Soft unix --version; then if [[ "$OSTYPE" == (darwin|dragonfly|freebsd|openbsd)* ]]; then optchars+=i fi - [[ $OSTYPE = freebsd* ]] && optchars+=D + [[ $OSTYPE = (darwin|freebsd)* ]] && optchars+=D args=( ${(M)args:#(|\*)(|\(*\))-[$optchars]*} ) fi diff --git a/Completion/Unix/Command/_user_admin b/Completion/Unix/Command/_user_admin index db1c977ad..d5a53af7c 100644 --- a/Completion/Unix/Command/_user_admin +++ b/Completion/Unix/Command/_user_admin @@ -12,7 +12,7 @@ case ${service%???}:${(M)service%???}:$OSTYPE in shells=( ${(M)commands:#*/(|[abckz]|tc|ba)sh} ) fi args+=( - '(-D -c --commend)'{-c+,--comment=}'[comment]:comment' + '(-D -c --comment)'{-c+,--comment=}'[comment]:comment' '(-D -d --home -b --base-dir)'{-d+,--home=}"[specify home directory]:home directory:_directories -W /" '(-D -e --expiredate)'{-e+,--expiredate}'[specify expiration date]:expiration date (YYYY-MM-DD)' '(-D -f --inactive)'{-f+,--inactive=}'[specify inactive days]:inactive days' @@ -41,6 +41,8 @@ case ${service%???}:${(M)service%???}:$OSTYPE in SYS_GID_MIN SYS_UID_MAX SYS_UID_MIN UID_MAX UID_MIN UMASK ) args+=( + '--btrfs-subvolume-home[use BTRFS subvolume for home directory]' + '(-F --add-subids-for-system)'{-F,--add-subids-for-system}'[add entries to sub[ud]id even when adding a system user]' '(-l --no-log-init)'{-l,--no-log-init}"[don't add user to lastlog and faillog databases]" '(-m --create-home -M --no-create-home)'{-M,--no-create-home}"[don't create user's home directory, regardless of /etc/login.defs]" '(-N --no-user-group -U --user-group)'{-N,--no-user-group}"[don't create a group with the same name as the user]" @@ -103,6 +105,7 @@ case ${service%???}:${(M)service%???}:$OSTYPE in user:mod:linux*) args+=( '(-a --append)'{-a,--append}'[add user to supplementary groups without removing from other groups]' + '(-r --remove)'{-r,--remove}'[remove user from supplementary groups without removing from other groups]' \*{-v,--add-subuids}'[add a range of subordinate uids]:uids (first-last)' \*{-V,--del-subuids}'[remove a range of subordinate uids]:uids (first-last)' \*{-w,--add-subgids}'[add a range of subordinate gids]:gids (first-last)' @@ -118,9 +121,16 @@ case ${service%???}:${(M)service%???}:$OSTYPE in ;| user:*:linux*) args+=( + '(-b --badname)'{-b,--badname}"[don't check for bad names]" '(-U --unlock --lock -L -p)'{-L,--lock}"[lock user's password]" '(-U --unlock --lock -L -p)'{-U,--unlock}"[unlock user's password]" - '(-Z --selinux-user)'{-Z,--selinux-user}"[specify SELinux user for the user's login]:user" + '(-Z --selinux-user)'{-Z,--selinux-user}"[specify SELinux user for the user's login]:user:_selinux_users" + "--selinux-range[specify SELinux MLS range for the user's login]:range" + ) + ;| + group:*:linux*) + args+=( + '(-U --users)'{-U+,--users=}'[specify users to add as members of the group]:user:_sequence _users' ) ;| group:*) @@ -164,6 +174,9 @@ case ${service%???}:${(M)service%???}:$OSTYPE in ':group:_groups' ) ;| + group:mod:linux*) + args+=( '(-a --append)'{-a,--append}'[append the users mentioned by -U without removing existing members]' ) + ;| ^*:linux*) args=( ${(R)args:#(|\*)(|\(*\))--*} ) # remove long options ;| diff --git a/Completion/Unix/Command/_vmstat b/Completion/Unix/Command/_vmstat index e05bc88bc..6db776e62 100644 --- a/Completion/Unix/Command/_vmstat +++ b/Completion/Unix/Command/_vmstat @@ -8,7 +8,7 @@ case $OSTYPE in '(-t --timestamp)'{-t,--timestamp}'[show timestamp]' '(-n --one-header)'{-n,--one-header}'[do not redisplay header]' '(-S --unit)'{-S+,--unit=}'[specify unit for displayed sizes]:unit prefix [K]:((k\:1000 K\:1024 m\:1000000 M\:1048576))' - '(-C --full-cache)'{-C,--full-cache}'[add further cache lines to main cache]' + '(-y --no-first)'{-y,--no-first}'[skip first line of output]' '1: :_guard "[0-9]#" "interval (seconds)"' '2:count' + '(action)' \ '(- :)'{-h,--help}'[display help information]' diff --git a/Completion/Unix/Command/_vorbis b/Completion/Unix/Command/_vorbis index 6c94469f9..fca218a51 100644 --- a/Completion/Unix/Command/_vorbis +++ b/Completion/Unix/Command/_vorbis @@ -32,7 +32,6 @@ case $service in '(-q --quality)'{-q+,--quality=}'[set encoding quality]:quality:(0 1 2 3 4 5 6 7 8 9 10)' \ '--resample=[resample input to the given sample rate before encoding]:sample rate (Hz)' \ '--downmix[down mix input from stereo to mono]' \ - '--scale=[set input scaling factor]:scaling factor' \ '(-s --serial)'{-s+,--serial=}'[force a specific serial number in the output stream]:serial number' \ "--discard-comments[don't copy comments from FLAC file to output Ogg Vorbis file]" \ '--ignorelength[ignore the datalength in Wave headers]' \ @@ -74,10 +73,6 @@ case $service in '(-q --quiet -v --verbose)'{--quiet,-q}'[quiet mode]' \ '(-q --quiet)*'{-v,--verbose}'[increase verbosity]' \ '(- *)'{-V,--version}'[display version information]' \ - \*{-c-,--config=-}'[specify config options]: :_values option - "default_device\:device" - "shuffle\:value\:(0 1)" - "repeat\:value\:(0 1)"' \ '*:sound file or directory:->urls-or-files' && ret=0 ;; ogginfo) diff --git a/Completion/Unix/Command/_w b/Completion/Unix/Command/_w index 69751c5e5..e82c84f57 100644 --- a/Completion/Unix/Command/_w +++ b/Completion/Unix/Command/_w @@ -1,6 +1,6 @@ #compdef w -local args +local -a args case $OSTYPE in linux*) @@ -11,7 +11,7 @@ case $OSTYPE in '(H -o --old-style -s --short)'{-o,--old-style}'[old style output format]' '(H -s --short -o --old-style)'{-s,--short}'[use short output format]' '(H -u --no-current)'{-u,--no-current}'[ignore the username while figuring out the current process and cpu times]' - '(H -n --no-truncat)'{-n,--no-truncat}'[non-truncated listing (large)]' + '(H -p --pids)'{-p,--pids}'[show process IDs]' + H '(-)--help[display help information]' '(-)'{-V,--version}'[display version information]' diff --git a/Completion/Unix/Command/_watch b/Completion/Unix/Command/_watch index fff3d56f6..e12add520 100644 --- a/Completion/Unix/Command/_watch +++ b/Completion/Unix/Command/_watch @@ -18,7 +18,10 @@ case $variant in '(-g --chgexit)'{-g,--chgexit}'[exit on command output change]' \ '(-n --interval)'{-n+,--interval=}'[specify update interval]:update interval (seconds) [2]' \ '(-p --precise)'{-p,--precise}'[run command at precise intervals]' \ + '(-q --equexit)'{-q+,--equexit=}'[exit when output of command does not change for the given cycles]:cycles' \ + '(-r --no-rerun)'{-r,--no-rerun}'[do not run the program on terminal resize]' \ '(-t --no-title)'{-t,--no-title}'[disable header]' \ + '(-w --no-wrap)'{-w,--no-wrap}'[disable line wrapping]' \ '(-x --exec)'{-x,--exec}'[pass command to exec(2) instead of `sh -c`]' \ '(-)*::: :->cmd' \ && ret=0 @@ -31,7 +34,7 @@ case $variant in then _cmdstring && ret=0 else - _normal && ret=0 + _normal -p watch && ret=0 fi ;; # watch(1) has completely different semantics on freebsd compared to linux, hence: diff --git a/Completion/Unix/Command/_wc b/Completion/Unix/Command/_wc index 49a03ba2c..a1897e289 100644 --- a/Completion/Unix/Command/_wc +++ b/Completion/Unix/Command/_wc @@ -13,6 +13,7 @@ if _pick_variant gnu=GNU unix --version; then args+=( '(*)--files0-from=[read NUL-terminated file list from specified file]:file:_files' '(-L --max-line-length)'{-L,--max-line-length}'[print longest line lengths]' + '--total=[when to print a line with total counts]:when:(auto always only never)' ) else args=( -A "-*" "${(@)args:#(|\(*\))(|\*)--*}" ) diff --git a/Completion/Unix/Command/_wget b/Completion/Unix/Command/_wget index 50fd7791a..acc8d5c6e 100644 --- a/Completion/Unix/Command/_wget +++ b/Completion/Unix/Command/_wget @@ -23,6 +23,7 @@ _arguments -C -s \ '(--config)--no-config' '--rejected-log=:file:_files' \ '(--tries -t)'{--tries=,-t+}'[set number of retries]:number of retries' \ '--retry-connrefused[retry even if connection is refused]' \ + '--retry-on-host-error[consider host errors as non-fatal, transient errors]' \ '--retry-on-http-error=[specify list of HTTP errors to retry]:http error' \ '(--output-document -O)'{--output-document=,-O+}'[specify file to write documents to]:output file:_files' \ '(--continue -c)'{--continue,-c}'[continue getting an existing file]' \ @@ -98,7 +99,7 @@ _arguments -C -s \ '--content-disposition[honor the Content-Disposition header when choosing local file names]' \ '--content-on-error[output received content on server errors]' \ "--auth-no-challenge[send basic HTTP authentication without first waiting for server's challenge]" \ - '--secure-protocol=[choose secure protocol]:protocol:(SSLv2 SSLv3 TLSv1 TLSv1_1 TLSv1_2 PFS)' \ + '--secure-protocol=[choose secure protocol]:protocol:(SSLv2 SSLv3 TLSv1 TLSv1_1 TLSv1_2 TLSv1_3 PFS)' \ --https-only \ "--no-check-certificate[don't check the server certificate]" \ '--certificate=[specify client certificate]:client certificate file:_files' \ diff --git a/Completion/Unix/Command/_xargs b/Completion/Unix/Command/_xargs index 8e23a04bb..30e5f8daa 100644 --- a/Completion/Unix/Command/_xargs +++ b/Completion/Unix/Command/_xargs @@ -25,7 +25,7 @@ case $variant in '-R[specify maximum arguments that -I will replace in]:replacements' ) ;| - freebsd*|netbsd*|dragonfly*) + darwin*|freebsd*|netbsd*|dragonfly*) args+=( '-S[space that -I can use for replacements]:size (bytes) [255]' ) diff --git a/Completion/Unix/Command/_xfconf-query b/Completion/Unix/Command/_xfconf-query new file mode 100644 index 000000000..fa535401f --- /dev/null +++ b/Completion/Unix/Command/_xfconf-query @@ -0,0 +1,33 @@ +#compdef xfconf-query +local curcontext="$curcontext" state state_descr line ret=1 +typeset -A opt_args + +_arguments -C -s -w : \ + '(-c --channel)'{-c,--channel}'[select channel to query/modify]:channel:( ${$(xfconf-query -l)\:#Channels\:} )' \ + '(-p --property)'{-p,--property}'[select property to query/modify]:property:->property' \ + '(-v --verbose)'{-v,--verbose}'[print property and value (with -l/-m)]' \ + '(-t --type)'{-t,--type}'[specify the property value type]:type:(empty string bool {,u}int{,16,64} double array {,u}char float)' \ + '(-R --recursive)'{-R,--recursive}'[recursively reset properties (with -r)]' \ + + '(operations)' \ + {-h,--help}'[show help options]' \ + {-V,--version}'[show version information]' \ + {-s,--set}'[define the value of a property]:value' \ + {-l,--list}'[list properties or channels]' \ + {-n,--create}'[create a new property]:new property name' \ + {-r,--reset}'[reset property]' \ + {-T,--toggle}'[invert boolean property]' \ + {-m,--monitor}'[monitor a channel for property changes]' && return + +case $state in + property) + # if -c/--channel is currently on the line, use it to complete an property. + if [[ -v opt_args[(i)-(c|-channel)] ]]; then + local expl + _wanted properties expl property compadd "$@" -- ${(f)"$(xfconf-query -c ${(v)opt_args[(i)-(c|-channel)]} -l)"} && ret=0 + else # just display a message + _message -e properties property && ret=0 + fi + ;; +esac + +return ret diff --git a/Completion/Unix/Command/_xmlsoft b/Completion/Unix/Command/_xmlsoft index 08b123e54..b8cf92700 100644 --- a/Completion/Unix/Command/_xmlsoft +++ b/Completion/Unix/Command/_xmlsoft @@ -40,6 +40,7 @@ case $service in '--maxdepth[increase the maximum depth]:depth' \ '--maxvars[increase the maximum variables]:variables' \ '--maxparserdepth[increase the maximum parser depth]:depth' \ + '--huge[relax hardcoded limits of the parser]' \ '--seed-rand[initialise random number generator]:seed' \ '--html[input document is an HTML file]' \ '--encoding[the input document character encoding]:encoding:(${encoding[@]})' \ diff --git a/Completion/Unix/Command/_xxd b/Completion/Unix/Command/_xxd index 31d26ab64..e9015a081 100644 --- a/Completion/Unix/Command/_xxd +++ b/Completion/Unix/Command/_xxd @@ -24,7 +24,7 @@ arguments=( # output options '(-b -bits -i -include -p -postscript -plain -ps -r -revert -u -uppercase)'{-b,-bits}'[output in binary digits, rather than hex]' '( -E -EBCDIC -i -include -p -postscript -plain -ps -r -revert )'{-E,-EBCDIC}'[print human-readable part in EBCDIC rather than ASCII]' - '(-i -include -p -postscript -plain -ps -r -revert)'{-e,-endian}'[little-endian dump]' + '(-i -include -p -postscript -plain -ps -r -revert)-e[little-endian dump]' '(-b -bits -E -EBCDIC -i -include -p -postscript -plain -ps -r -revert )'{-i,-include}'[output in C include file style]' '(-b -bits -E -EBCDIC -i -include -p -postscript -plain -ps -C -capitalize )'{-p,-postscript,-plain,-ps}'[read or write a plain hexdump (no line numbers or ASCII rendering)]' @@ -35,12 +35,14 @@ arguments=( '(- :)'{-v,-version}'[show program version]' '*'{-a,-autoskip}"[a single '*' replaces runs of NUL (toggleable)]" '(-C -capitalize)'{-C,-capitalize}'[capitalize variable names in C include file style]' - {-c+,-cols}'[specify number of octets per line]: :_guard "[0-9a-fA-Fx]#" "number of octets per line"' - {-g+,-groupsize}'[specify the number of octets per group]: :_guard "[0-9]#" "number of octets per group"' - {-l+,-len}'[specify number of octets to output]: :_guard "[0-9]#" "number of octets to output"' - {-o+,-offset}'[add specified offset to displayed file position]:offset' + '(-c -cols)'{-c+,-cols}'[specify number of octets per line]: :_guard "(0x|)[0-9a-fA-Fx]#" "number of octets per line"' + '(-g -groupsize)'{-g+,-groupsize}'[specify the number of octets per group]: :_guard "(0x|)[0-9a-fA-F]#" "number of octets per group"' + '(-l -len)'{-l+,-len}'[specify number of octets to output]: :_guard "(0x|)[0-9a-fA-F]#" "number of octets to output"' + '(-n -name)'{-n+,-name}'[override the variable name output when -i is used]:variable name' + '(-o -offset)'{-o+,-offset}'[add specified offset to displayed file position]:offset' '-d[show offset in decimal instead of hex]' - {-s,-skip,-seek}'[specify file offset to dump from]: :_guard "[0-9]#" "file offset to dump from (absolute or relative)"' + '-R+[colorize the output]:when:(always auto never)' + '(-s -skip -seek)'{-s+,-skip,-seek}'[specify file offset to dump from]: :_guard "(0x|)[0-9a-fA-F]#" "file offset to dump from (absolute or relative)"' ': :_files' ) diff --git a/Completion/Unix/Command/_xz b/Completion/Unix/Command/_xz index a4dfea1f5..6e68e0f69 100644 --- a/Completion/Unix/Command/_xz +++ b/Completion/Unix/Command/_xz @@ -22,20 +22,20 @@ case "$service" in '(I)*'{-v,--verbose}'[verbose mode]' \ '(I * --files --files0)--files=-[read list of files to process from file]::file:_files' \ '(I * --files --files0)--files0=-[read null terminated list of files to process from file]::file:_files' \ - '(I -F --format)'{-F,--format}'=[specify file format]:format:(auto xz lzma raw)' \ + '(I -F --format)'{-F+,--format=}'[specify file format]:format:(auto xz lzma lzip raw)' \ '(I -T --threads)'{-T+,--threads=}'[use specified number of threads]:threads [1]' \ - '(I -M --memlimit --memory)'{-M+,--memlimit=,--memory=}'[set memory usage limit]:memory usage' \ + '(I -M --memlimit --memory)'{-M+,--memlimit=,--memory=}'[set memory usage limit]: :_numbers -u bytes "memory limit" KiB MiB GiB %\:percentage\ of\ available\ RAM' \ '(I)--no-adjust[give error if settings exceed memory limit]' \ '(I -Q --no-warn)'{-Q,--no-warn}'[make warnings not affect exit status]' \ + 'comp' \ "(I decomp)"{-z,--compress}'[compress]' \ '(I decomp -e --extreme)'{-e,--extreme}'[try to improve compression ratio by using more CPU time]' \ '(I decomp -S --suffix)'{-S+,--suffix=}'[use specified suffix for compressed files]:suffix [.xz]' \ - '(I decomp -C --check)'{-C,--check}'=[integrity check type]:check type:(none crc32 crc64 sha256)' \ + '(I decomp -C --check)'{-C+,--check=}'[integrity check type]:check type:(none crc32 crc64 sha256)' \ '(I decomp)--block-size=[start a new .xz block after specified bytes of input]:size' \ '(I decomp)--block-list=[start a new .xz block after specified intervals of uncompressed data]:size' \ '(I decomp)--flush-timeout=[specify maximum time between flushing of output]:time (ms) [0]' \ - '(I decomp)--memlimit-compress=[set memory usage limit for compression]:memory usage' \ + '(I decomp)--memlimit-compress=[set memory usage limit for compression]: :_numbers -u bytes "memory limit" KiB MiB GiB %\:percentage\ of\ available\ RAM' \ + 'decomp' \ '(I comp level filters)'{-d,--decompress}'[decompress]' \ '(I comp level filters)'{-t,--test}'[test compressed file integrity]' \ @@ -43,7 +43,8 @@ case "$service" in "(I comp level filters)--ignore-check[don't verify integrity when decompressing]" \ '(I comp level filters)--single-stream[decompress only the first stream]' \ "(I comp level filters)--no-sparse[don't create sparse files when decompressing]" \ - '(I comp level filters)--memlimit-decompress=[set memory usage limit for decompression]:memory usage' \ + '(I comp level filters)--memlimit-decompress=[set memory usage limit for decompression]: :_numbers -u bytes "memory limit" KiB MiB GiB %\:percentage\ of\ available\ RAM' \ + '(I comp level filters)--memlimit-mt-decompress=[set memory usage limit for multi‐threaded decompression]: :_numbers -u bytes "memory limit" KiB MiB GiB %\:percentage\ of\ available\ RAM' \ + '(I)' \ '(* comp decomp level filters common)--info-memory[display amount of RAM and memory usage limits]' \ '(- *)'{-h,--help}'[display help message]' \ @@ -52,7 +53,7 @@ case "$service" in + '(level)' \ '(I filters decomp)-'{-best,-fast,1,2,3,4,5,6,7,8,9} \ + filters \ - '(I level decomp --extreme)'--{x86,powerpc,ia64,arm,armthumb,sparc}=-'[add a branch/call/jump filter]::option:->bcj-options' \ + '(I level decomp --extreme)'--{x86,powerpc,ia64,arm,armthumb,arm64,sparc}=-'[add a branch/call/jump filter]::option:->bcj-options' \ '(I level decomp --extreme)'--lzma{1,2}=-'[add lzma filter]::option:->lzma-options' \ '(I level decomp --extreme)--delta=-[add delta filter]::option:->delta-options' && ret=0 ;; @@ -64,10 +65,10 @@ case $state in [[ -n ${(k)opt_args[(i)decomp*]} ]] && unset decompress if [[ -z "$decompress" ]]; then _description files expl 'compressed file' - _files "$expl[@]" -g '*.(xz|txz|lzma|tlz)(-.)' && return + _files "$expl[@]" -g '*.(xz|txz||lz|lzma|tlz)(-.)' && return else _description files expl 'file to compress' - _files "$expl[@]" -g '^*.(xz|txz|lzma|tlz)(-.)' && return + _files "$expl[@]" -g '^*.(xz|txz|lz|lzma|tlz)(-.)' && return fi ;; lzma-options) diff --git a/Completion/Unix/Command/_zfs b/Completion/Unix/Command/_zfs index be4a64b33..c09435a1f 100644 --- a/Completion/Unix/Command/_zfs +++ b/Completion/Unix/Command/_zfs @@ -1,7 +1,8 @@ -#compdef zfs zdb zpool +#compdef zfs zdb zpool zstream local curcontext="$curcontext" implementation nm="$compstate[nmatches]" local -a state curstate line state_descr expl alts args +local -a devices features typeset -A opt_args val_args local MATCH MBEGIN MEND local -a subcmds @@ -13,6 +14,7 @@ local -a ds_types sum_algorithms comp_algorithms dedup_algorithms local -a ds_propnames ro_ds_props rw_ds_props ci_ds_props # dataset properties local -a po_propnames ro_po_props rw_po_props ci_po_props # pool properties +local -a ro_vdev_props rw_vdev_props _pick_variant -r implementation -c 'zpool upgrade -v' openzfs='This system supports ZFS pool feature flags' solaris @@ -98,14 +100,32 @@ rw_ds_props=( 'volsize:size:_numbers -M "m:{a-zA-Z}={A-Za-z}" -u bytes size :B {k,M,G,T,P,E,Z}{,B}' ) +ro_vdev_props=( + capacity state guid asize psize ashift size free allocated expandsize + fragmentation parity devid physpath encpath fru parent children numchildren + read_errors write_errors checksum_errors initialize_errors + null_ops read_ops write_ops free_ops claim_ops trim_ops + null_bytes read_bytes write_bytes free_bytes claim_bytes trim_bytes + removing +) +rw_vdev_props=( + {checksum,io}'_n:number of errors' {checksum,io}'_t:threshold (seconds)' + {comment,bootsize}:value + {allocating,failfast}':value:(on off)' + 'path:device path:_files -g "*(-%)" -P / -W /' +) + case $service:$implementation in *:openzfs) ds_types+=( bookmark ) - sum_algorithms+=( noparity sha512 skein edonr ) + sum_algorithms+=( noparity sha512 skein edonr blake3 ) comp_algorithms+=( zstd zstd-{1..19} zstd-fast zstd-fast-{{1..9}{,0},100,500,1000} ) - dedup_algorithms+=( {sha512,skein}{,\,verify} edonr,verify ) + dedup_algorithms+=( {sha512,skein,blake3}{,\,verify} edonr,verify ) share_rw_properties=( sharesmb:option sharenfs:option ) ro_po_props+=( + 'bcloneratio[block cloning ratio for saved space]' + 'bclonesaved[amount of storage spared by use of block cloning]' + 'bcloneused[amount of storage used by cloned blocks]' 'expandsize[uninitialized space within the pool]' 'fragmentation[amount of fragmentation in the pool]' 'freeing[amount of space remaining to be reclaimed]' @@ -119,6 +139,7 @@ case $service:$implementation in 'autotrim[periodically trim recently freed space]:value:(on off)' 'comment[text string that is available even if the pool becomes faulted]:value' 'multihost[perform pool activity check during import]:value:(on off)' + 'feature@' ) rw_ds_props+=( 'aclmode:value:(discard groupmask passthrough restricted)' @@ -139,7 +160,8 @@ case $service:$implementation in ) ro_ds_props+=( createtxg clones filesystem_count guid logicalreferenced logicalused - receive_resume_token refcompressratio snapshot_count volblocksize written + receive_resume_token refcompressratio snapshot_count snapshots_changed + volblocksize written ) delegatable_perms=( bookmark load-key change-key userobjquota userobjused groupobjquota @@ -257,6 +279,9 @@ case $service:$implementation in list offline online reguid remove replace scrub set split status upgrade ) ;; + zstream:*) + subcmds+=( dump decompress redup token recompress ) + ;; esac case $OSTYPE in @@ -270,7 +295,7 @@ case $OSTYPE in linux-gnu) rw_ds_props+=( 'relatime:value:(on off)' ) ci_ds_props+=( - {,fs,def,root}'context:SELinux context:_selinux_contexts' + {,fs,def,root}'context:SELinux context:_selinux_contexts -a file_type' ) ;; esac @@ -294,9 +319,8 @@ ci_ds_props+=( $rw_ds_props ) ds_propnames=( ${rw_ds_props%%:*} ) po_propnames=( ${ro_po_props%%:*} ${ci_po_props%%:*} ${rw_po_props%%:*} ) - case $service in - zfs|zpool) + zfs|zpool|zstream) _arguments -C -A "-*" \ '-?[display usage information]' \ '*::command:->subcmd' && return 0 @@ -633,7 +657,9 @@ case $service:$words[1] in '(-e --embed)'{-e,--embed}'[more compact stream for blocks stored with the embedded_data feature]' '(-c --compressed)'{-c,--compressed}'[more compact stream for compressed blocks]' '(-h --holds)'{-h,--holds}'[send snapshot holds]' - '-V[set the process title to a per-second report of how much data has been send]' + '(-V --proctitle)'{-V,--proctitle}'[set the process title to a per-second report of how much data has been sent]' + \*{-X,--exclude}'[exclude datasets (with -R)]:dataset:_sequence _zfs_dataset -t fs' + '(-s --skip-missing)'{-s,--skip-missing}'[continue even when snapshots missing in the hierarchy]' '-t[create a send stream that resumes an interrupted receive]:resume token' '(-w --raw)'{-w,--raw}'[keep encrypted data exactly as it exists on disk]' - redact @@ -763,10 +789,10 @@ case $service:$words[1] in zfs:holds) [[ $implementation = openzfs ]] && args=( '-H[suppress printing of headers, tab-delimit columns]' + '-p[use (parsable) numeric output for timestamps]' ) [[ $OSTYPE = freebsd<-12>.* ]] && args+=( # features were lost with the openzfs rebase - '-p[use exact (parsable) numeric output]' '(-r)-d+[depth]:value' ) _arguments -A "-*" -S $args \ @@ -789,6 +815,9 @@ case $service:$words[1] in '-N[enumerate new child datasets (with -r)]' '(1 -e)-E[show difference from empty]' ) + [[ $implementation = openzfs ]] && args=( + "-h[don't"' \\0ooo-escape non-ASCII paths]' + ) _arguments -A "-*" -S $args \ '-F[add column for filetype character, similar to ls(1)]' \ '-H[suppress printing of headers and arrows, tab-delimit columns]' \ @@ -981,8 +1010,10 @@ case $service:$words[1] in '-H[suppress headers and tab-delimit fields]' \ '-p[display numbers in parseable (exact) values]' \ '-o+[specify fields to display]: : _values -s , field name property value source' \ - ':property:_values -s , "property" $po_propnames' \ - '*:pool:_zfs_pool' + ':property:_values -s , "property" $po_propnames ${ro_vdev_props%:*}' \ + ':pool:_zfs_pool' \ + '::vdev:->pool-vdevs-all' \ + '*:pool:_zfs_pool -F line' ;; zpool:history) @@ -1030,9 +1061,10 @@ case $service:$words[1] in _arguments -A "-*" -S \ '(-s --suspend -c --cancel)'{-c,--cancel}'[cancel initializing on specified devices]' \ '(-s --suspend -c --cancel)'{-s,--suspend}'[suspend initializing on specified devices]' \ + '(-u --uninit)'{-u,--uninit}'[clear initialization state on specified devices]' \ '(-w --wait)'{-w,--wait}'[wait until devices have finished initializing before returning]' \ ':pool:_zfs_pool' \ - '*:device:pool-devices' + '*:device:->pool-devices' ;; zpool:iostat) @@ -1165,6 +1197,7 @@ case $service:$words[1] in [[ $implementation = openzfs ]] && args=( '(-s)-p[pause scrubbing]' '-w[wait until scrub has completed before returning]' + '-e[only scrub files with known data errors]' ) _arguments -A "-*" -S $args \ '(-p)-s[stop scrubbing]' \ @@ -1174,7 +1207,8 @@ case $service:$words[1] in zpool:set) _arguments -C -A "-*" -S \ ':property:->set-pool-properties' \ - '*:pool:_zfs_pool' + ':pool:_zfs_pool' \ + ':vdev:->pool-vdevs' ;; zpool:split) @@ -1235,7 +1269,7 @@ case $service:$words[1] in zpool:upgrade) _arguments -A "-*" -S \ - '(- *)-v[display ZFS versions and descriptions]' + '(- *)-v[display ZFS versions and descriptions]' \ "(-v)-V+[upgrade to given version]:version" \ '(-v *)-a[upgrade all pools]' \ '(-a -v)*:pool:_zfs_pool' @@ -1251,6 +1285,36 @@ case $service:$words[1] in ':interval' ;; + zstream:dump) + _arguments -A "-*" -S \ + '-C[suppress the validation of checksums]' \ + '(-d)-v[print metadata for each record]' \ + '(-v)-d[dump data contained in each record]' \ + ':file:_files' + ;; + + zstream:token) + _message -e tokens 'resume token' + ;; + + zstream:decompress) + _arguments -A "-*" -S \ + '-v[print summary of decompressed records]' \ + '*:offset' + ;; + + zstream:redup) + _arguments -A "-*" -S \ + '-v[print summary of converted records]' \ + ':file:stream file' + ;; + + zstream:recompress) + _arguments -A "-*" -S \ + '-l+[specify compression level]:level' \ + '*:algorithm:compadd -a comp_algorithms' + ;; + *) _default ;; @@ -1259,6 +1323,7 @@ esac while (( $#state )); do curstate=$state state=() + devices=() case $curstate in virtual-devices) local -a vdevtypes @@ -1278,8 +1343,15 @@ while (( $#state )); do _alternative $alts 'file-vdevs:file vdev:_files -W / -P /' ;; + pool-vdevs-all) devices=( all-vdevs ) ;& + pool-vdevs) # same as pool-devices but on OpenZFS 2.2+ only features + # path field is also valid + devices+=( $(_call_program devices zpool get -H -o name state $line[CURRENT-2] all-vdevs) ) + _description devices expl "$state_descr" + compadd "$expl[@]" -a devices + ;; + pool-devices) - local -a devices devices=( ${${${(M)${(f)"$(_call_program devices zpool status $line[1])"}:#$'\t' *}##[[:blank:]]#}%%[[:blank:]]*} ) if (( $#devices )); then _description devices expl "$state_descr" @@ -1321,12 +1393,13 @@ while (( $#state )); do create-properties) args=( $ci_ds_props ) ;| set-properties) args=( $rw_ds_props ) ;| newpool-properties) args=( $rw_po_props $ci_po_props ) ;| - set-pool-properties) args=( $rw_po_props ) ;| + set-pool-properties) args=( $rw_po_props $rw_vdev_props ) ;| *-properties) if compset -P 1 '(#m)*@'; then if compset -P 1 '*='; then case $MATCH in + *feature@) _wanted states expl state compadd active enabled disabled ;; *quota@) _alternative \ 'sizes: :_numbers -M "m\:{a-zA-Z}={A-Za-z}" -u bytes size \:B {k,M,G,T,P,E,Z}{,B}' \ 'properties:property:(none)' @@ -1334,8 +1407,12 @@ while (( $#state )); do esac else case $MATCH in - user*@) _users -S = ;; - group*@) _groups -S = ;; + feature@) + features=( ${${${${${(f)"$(_call_program features zpool upgrade -v)"}[(r)---*,(R)VER *]}[2,-3]}:# *}%% *} ) + _wanted features expl feature compadd -qS= -a features + ;; + user*@) _users -qS= ;; + group*@) _groups -qS= ;; project*@) _message -e projects project ;; esac fi diff --git a/Completion/Unix/Type/_canonical_paths b/Completion/Unix/Type/_canonical_paths index a8fbbb524..1444bc165 100644 --- a/Completion/Unix/Type/_canonical_paths +++ b/Completion/Unix/Type/_canonical_paths @@ -42,7 +42,8 @@ _canonical_paths_add_paths () { # ### Ideally, this codepath would do what the 'if' above does, # ### but telling compadd to pretend the "word on the command line" # ### is ${"the word on the command line"/$origpref/$canpref}. - matches+=(${${(M)files:#$canpref*}/$canpref/$origpref}) + # ### The following approximates that. + matches+=(${(q)${(M)files:#$canpref*}/$canpref/$origpref}) fi for subdir in $expref?*(@); do diff --git a/Completion/Unix/Type/_diff_options b/Completion/Unix/Type/_diff_options index dfa9889f2..03ea1d7fe 100644 --- a/Completion/Unix/Type/_diff_options +++ b/Completion/Unix/Type/_diff_options @@ -1,6 +1,6 @@ #autoload -local of ofwuc ouc oss ofwy ofwg ofwl cmd variant +local of ofwuc ouc oss ofwy ofwg ofwl cmd variant ign local -a args cmd="$1" @@ -25,7 +25,10 @@ _diff_palette() { return ret } -if _pick_variant -r variant -c $cmd gnu=GNU unix -v || [[ $OSTYPE = freebsd<12->.* ]]; then +if _pick_variant -r variant -c $cmd gnu=GNU unix -v || + [[ $OSTYPE = (freebsd<12->|darwin<22->).* ]]; then + (( $#words > 2 )) && ign='!' + # output formats of="-y --side-by-side -n --rcs -e -f --ed -q --brief -c -C --context -u -U \ --unified --old-group-format --new-group-format --changed-group-format \ @@ -61,29 +64,28 @@ if _pick_variant -r variant -c $cmd gnu=GNU unix -v || [[ $OSTYPE = freebsd<12-> --unchanged-group-format" if [[ $variant = gnu ]]; then - (( $#words > 2 )) || args+=( - '(-v --version)'{-v,--version}'[display version information]' - '--help[display usage information]' - ) args+=( '(-H --speed-large-files)'{-H,--speed-large-files}'[assume large files and many small changes]' '(-E --ignore-tab-expansion)'{-E,--ignore-tab-expansion}'[ignore changes due to tab expansion]' '(-Z --ignore-trailing-space)'{-Z,--ignore-trailing-space}'[ignore white space at line end]' - "($ofwuc $oss -F --show-function-line)"{-F+,--show-function-line=}'[show the most recent line matching regex]:regex' "($ofwy $ouc)--left-column[output only left column of common lines]" "($ofwg $ouc $oss)--old-group-format=[set old group format]:old group format" "($ofwg $ouc $oss)--new-group-format=[set new group format]:new group format" "($ofwl $ouc $oss)--unchanged-line-format=[set unchanged line format]:unchanged line format" - '(--to-file)--from-file=[compare specified file to all operands]:from file:_files' \ - '(--from-file)--to-file=[compare all operands to specified file]:to file:_files' \ - '--color=-[use colors in output]::when [auto]:(never always auto)' + '(--to-file)--from-file=[compare specified file to all operands]:from file:_files' + '(--from-file)--to-file=[compare all operands to specified file]:to file:_files' '--palette=[specify colors to use]:color:_diff_palette' + "${ign}(1 2)-v[display version information]" ) else args+=( '!--speed-large-files' ) + if [[ $OSTYPE = darwin<22->.* ]]; then + args+=( '(-A --algorithm)'{-A+,--algorithm=}'[specify the algorithm to use]:algorithm:(myers patience stone)' ) + fi fi _arguments -s $args \ + '--color=-[use colors in output]::when [auto]:(never always auto)' \ '(-i --ignore-case)'{-i,--ignore-case}'[case insensitive]' \ '--ignore-file-name-case[ignore case when comparing file names]' \ '!(--ignore-file-name-case)--no-ignore-file-name-case' \ @@ -99,6 +101,7 @@ if _pick_variant -r variant -c $cmd gnu=GNU unix -v || [[ $OSTYPE = freebsd<12-> "($of $oss)-u[output a unified diff]" \ "($ofwuc $oss)*"{-L+,--label=}'[set label to use instead of file name and timestamp]:label' \ "($ofwuc $oss -p --show-c-function)"{-p,--show-c-function}'[show C function of each change]' \ + "($ofwuc $oss -F --show-function-line)"{-F+,--show-function-line=}'[show the most recent line matching regex]:regex' \ "($of $ouc $oss)"{-q,--brief}'[output only whether files differ]' \ "($of $ouc $oss -e --ed)"{--ed,-e}'[output an ed script]' \ "!($of $ouc $oss)--normal" \ @@ -127,39 +130,52 @@ if _pick_variant -r variant -c $cmd gnu=GNU unix -v || [[ $OSTYPE = freebsd<12-> "($of $ouc)"{-y,--side-by-side}'[output in two columns]' \ "($ofwy $ouc)--suppress-common-lines[don't output common lines]" \ "($ofwy $ouc --width -W)"{--width=,-W+}'[set size of line]:number of characters per line' \ + "${ign}(1 2)--version[display version information]" \ + "${ign}(1 2)--help[display usage information]" \ "$@" else of='-c -e -f' case $OSTYPE in openbsd*|solaris2.<9->) of+=' -u -U' + ;| + openbsd*|solaris*) + of+=' -n -C -D' + ;| + solaris*) + of+=' -h' + ;| + openbsd*) + of+=' -q' + ;| + # modifications to "$of" should be done above this line so that it is + # uniformly defined while constructing $args + openbsd*|solaris2.<9->) args+=( - "($of)-u[output a unified diff]" - "($of)-U+[output a unified diff]:lines of context" + "($of)-u[output a unified diff]" + "($of)-U+[output a unified diff]:lines of context" ) ;| openbsd*|solaris*) args+=( - "($of)-C+[output a context diff]:lines of context" - "($of)-D+[output merged file with preprocessor directives]:preprocessor symbol" - '-i[case insensitive]' - '-l[long output format (paginate with pr(1))]' - '-s[report on identical files]' - '-t[expand tabs in output lines]' + "($of)-C+[output a context diff]:lines of context" + "($of)-D+[output merged file with preprocessor directives]:preprocessor symbol" + '-i[case insensitive]' + '-s[report on identical files]' + '-t[expand tabs in output lines]' ) ;| solaris*) - of+=' -h -n' args+=( - '-w[ignore all white space]' - "($of)-h[do a fast, half-hearted job]" - "($of)-n[output a reversed ed script]" + '-w[ignore all white space]' + "($of)-h[do a fast, half-hearted job]" + "($of)-n[output a reversed ed script]" '-S+[set first file in comparison]:start with file:_files' + '-l[long output format (paginate with pr(1))]' ) ;; openbsd*) - of+=' -n -q -u -C -D -U' - args=( + args+=( "($of)-n[output an rcsdiff(1)-compatible diff]" "($of)-q[only print a line when the files differ; does not produce a list of changes]" '-a[treat all files as ASCII text]' @@ -173,7 +189,7 @@ else '-P[treat absent files in the second directory as if they were empty]' '-S[start a directory diff from a file name]:file name:_files' '*-X[exclude files and subdirectories whose basenames match lines in a file]:file name:_files' - '-x[exclude files and subdirectories whose basenames match a pattern]:pattern' + '*-x[exclude files and subdirectories whose basenames match a pattern]:pattern' ) ;; esac diff --git a/Completion/Unix/Type/_ldap_attributes b/Completion/Unix/Type/_ldap_attributes new file mode 100644 index 000000000..0711cfbf1 --- /dev/null +++ b/Completion/Unix/Type/_ldap_attributes @@ -0,0 +1,27 @@ +#autoload + +local -a expl attrs + +# These come from dumping attributes from basic installations of both openldap +# and FreeIPA and combining results. It is possible to have custom additions so +# a definitive list is not possible Hence the use of -x with compadd. +# +attrs=( + associatedDomain authenticationMethod automountInformation automountKey + automountMapName bindTimeLimit cACertificate;binary cn dc defaultSearchBase + defaultServerList description displayName dn followReferrals gecos gidNumber + givenName homeDirectory info initials ipaCertIssuerSerial ipaCertSubject + ipaConfigString ipaKeyExtUsage ipaKeyTrust ipaNTSecurityIdentifier + ipaPublicKey ipaUniqueID ipHostNumber loginShell mail member memberUid + mepManagedBy nisDomain nisNetgroupTriple o objectClass objectClassMap ou + pwdAllowUserChange pwdAttribute pwdCheckQuality pwdExpireWarning + pwdFailureCountInterval pwdGraceAuthNLimit pwdInHistory pwdLockout + pwdLockoutDuration pwdMaxAge pwdMaxFailure pwdMinAge pwdMinLength + pwdMustChange pwdSafeModify searchTimeLimit serviceSearchDescriptor sn + telephoneNumber uid uidNumber userCertificate;binary userPKCS12 + userSMIMECertificate +) + +_description ldap-attributes expl "ldap attribute" +compadd "${@:/-X/-x}" "${expl[@]:/-X/-x}" \ + -M 'm:{a-zA-Z}={A-Za-z} r:[^A-Z]||[A-Z]=* r:|=*' -a attrs diff --git a/Completion/Unix/Type/_ldap_filters b/Completion/Unix/Type/_ldap_filters new file mode 100644 index 000000000..5e0e30f01 --- /dev/null +++ b/Completion/Unix/Type/_ldap_filters @@ -0,0 +1,91 @@ +#autoload + +# LDAP search filters conforming to RFC4515 + +local -a expl excl optype disp end pre +local -i nest=0 +local open='(' close=')' andop='&' orop='|' + +[[ -prefix - ]] && return 1 + +local -a matchingrules=( # From RFC4517 + bitStringMatch booleanMatch caseExactIA5Match + caseExactMatch caseExactOrderingMatch caseExactSubstringsMatch + caseIgnoreIA5Match caseIgnoreIA5SubstringsMatch caseIgnoreListMatch + caseIgnoreListSubstringsMatch caseIgnoreMatch caseIgnoreOrderingMatch + caseIgnoreSubstringsMatch directoryStringFirstComponentMatch + distinguishedNameMatch generalizedTimeMatch generalizedTimeOrderingMatch + integerFirstComponentMatch integerMatch integerOrderingMatch keywordMatch + numericStringMatch numericStringOrderingMatch numericStringSubstringsMatch + objectIdentifierFirstComponentMatch objectIdentifierMatch octetStringMatch + octetStringOrderingMatch telephoneNumberMatch telephoneNumberSubstringsMatch + uniqueMemberMatch wordMatch +) +local -a classes=( # Sampled from real servers, arbitrary other values allowed + automount automountMap cosTemplate dcObject device dnaSharedConfig domain + domainRelatedObject DUAConfigProfile extensibleObject groupOfNames + groupOfPrincipals ieee802device inetOrgPerson inetuser ipaassociation ipaca + ipacaacl ipaCertificate ipaCertMapConfigObject ipacertprofile ipaConfigObject + ipaDomainIDRange ipaDomainLevelConfig ipaGuiConfig ipahbacrule ipahbacservice + ipahbacservicegroup ipahost ipahostgroup ipaIDrange ipaKeyPolicy + ipakrbprincipal ipaNameResolutionData ipaNTDomainAttrs ipaNTGroupAttrs + ipaNTUserAttrs ipaobject ipaPublicKeyObject ipaReplTopoManagedServer + ipaservice ipaSshGroupOfPubKeys ipasshhost ipasshuser ipasudorule + ipaSupportedDomainLevelConfig ipaTrustedADDomainRange ipaUserAuthTypeClass + ipausergroup ipHost krbContainer krbprincipal krbprincipalaux + krbrealmcontainer krbTicketPolicyAux mepManagedEntry mepOriginEntry + nestedGroup nisDomainObject nisNetgroup nsContainer nsDS5Replica nshost + organization organizationalPerson organizationalRole organizationalUnit + person pilotObject pkiCA pkiuser posixAccount posixGroup pwdPolicy + shadowAccount simpleSecurityObject top +) + +compquote open close andop orop +open=${(q)open} close=${(q)close} +# default to double rather than backslash quoting +[[ -z $compstate[quote] && -z $PREFIX ]] && pre='"(' + +zstyle -s ":completion:${curcontext}:operators" list-separator sep || sep=-- +print -v disp -f "%s $sep %s" \| or \& and \! not +end=( ") $sep end" ) +excl=( ! \\\| \& ) # compadd -F uses globs: only | needs quoting + +local -a query=( + \( /$'*\0[ \t\n]#'/ \) # strip off any preceding arguments + \( + \( "/${open}!/" -'optype[++nest]=1;pre=""' + \| "/${open}${(q)orop}/" -'optype[++nest]=2;pre=""' + \| "/${open}${andop}/" -'optype[++nest]=3;pre=""' + \| '/[]/' ':operators:operator:compadd -F "( ${(q)excl[optype[nest]]} )" -d disp -P ${pre:-${(Q)open}} -S ${(Q)open} \| \& \!' \) + \| + \( "/${open}[^\\)]##/" "%$close%" # pass over whole var=value, needed due to lack of backtracking after the following + \| "/${open}(#i)homeDirectory=/" '/[]/' ':directories:directory:_directories -P / -W / -r ") \t\n\-"' + \| "/${open}(#i)loginShell=/" '/[]/' ':shells:shell:compadd -S ${(Q)close} ${(f)^"$(</etc/shells)"}(N)' + \| "/${open}(#i)mail=/" '/[]/' ':email-addresses:mail:_email_addresses -S ${(Q)close}' + \| "/${open}(#i)objectClass=/" '/[]/' ':object-classes:class:compadd -S ${(Q)close} -M "m:{a-zA-Z}={A-Za-z} r:[^A-Z]||[A-Z]=* r:|=*" -a classes' + \| "/${open}(#i)(automountKey|(member|)uid)=/" '/[]/' ':users:username:_users -S ${(Q)close}' + \| "/${open}(#i)cn=/" '/[]/' ':cn:cn: _alternative "users:user:_users -S ${close}" "groups:group:_groups -S ${close}" "hosts:host:_hosts -S ${close}"' + \| + '/[^:=<>~]##/' '%[=:<>~]%' -'pre=""' + ':object-types:object type:_ldap_attributes -P ${pre:-${(Q)open}} -S = -r ":=~<> \t\n\-"' + \( + '/:/' + '/[^:]##:=/' ':matching-rules:matching rule:compadd -S ":=" -a matchingrules' + \| + '/([~<>]|)=/' ':operators:operator:compadd -S "" "<=" \>= \~=' + \) + '/[^\\)]##/' "%$close%" ': _message -e object-values "object value (* for presence check)"' + \) + "/$close/" -'(( nest ))' ':brackets:bracket:compadd ${=query[nest]:+-S ""} \)' + \( + # This use of -P/-d and an empty match works around a limitation/bug where + # mixed use of -P removes any quoting + "/$close/" ':operators:operator:compadd ${=query[nest-1]:+-S ""} -d end -P ${(Q)close} ""' + \( // -'(( --nest ))' \| '//' -'((!nest))' '/[]/' ': compadd ""' \) + \) \# + // -'(( nest && optype[nest] > 1 ))' + \) \# +) + +_regex_arguments _ldap_search_filters "$query[@]" +_ldap_search_filters diff --git a/Completion/Unix/Type/_ssh_hosts b/Completion/Unix/Type/_ssh_hosts index a4a08ad91..b50e1c16a 100644 --- a/Completion/Unix/Type/_ssh_hosts +++ b/Completion/Unix/Type/_ssh_hosts @@ -24,7 +24,7 @@ if [[ -r $config ]]; then while (( idx <= $#lines )); do IFS=$'=\t ' read -r key line <<<"${lines[idx]}" if [[ "$key" == ((#i)match) ]]; then - match_args=(${(z)line}) + match_args=( ${(Z.C.)line} ) while [[ $#match_args -ge 2 ]]; do if [[ "${match_args[1]}" == (#i)(canonical|final|(|original)host) ]]; then key="Host" @@ -36,13 +36,10 @@ if [[ -r $config ]]; then fi case "$key" in ((#i)include) - lines[idx]=("${(@f)$(cd $HOME/.ssh; cat ${(z)~line})}") 2>/dev/null;; + lines[idx]=( "${(@f)$(cd $HOME/.ssh; cat ${(Z.C.)~line} 2>/dev/null)}" ) ;; ((#i)host(|name)) - for host in ${(z)line}; do - case $host in - (*[*?]*) ;; - (*) config_hosts+=("$host") ;; - esac + for host in ${(Z.C.)line}; do + [[ $host != *[*?%]* ]] && config_hosts+=( $host ) done ;& (*) (( ++idx ));; esac diff --git a/Completion/Unix/Type/_umountable b/Completion/Unix/Type/_umountable index 6e4988e2d..0111555b6 100644 --- a/Completion/Unix/Type/_umountable +++ b/Completion/Unix/Type/_umountable @@ -1,6 +1,6 @@ #autoload local tmp -local dev_tmp dpath_tmp mp_tmp mline +local -a dev_tmp dpath_tmp mp_tmp mline case "$OSTYPE" in linux*) @@ -15,6 +15,7 @@ irix*) ;; freebsd*|dragonfly*) /sbin/mount | while read mline; do + [[ $mline[(w)1] = map ]] && continue dev_tmp+=( $mline[(w)1] ) mp_tmp+=( $mline[(w)3] ) done diff --git a/Completion/X/Command/_evince b/Completion/X/Command/_evince index 21b493360..49f11f341 100644 --- a/Completion/X/Command/_evince +++ b/Completion/X/Command/_evince @@ -15,6 +15,7 @@ _arguments -s -S \ '--g-fatal-warnings[make all warnings fatal]' \ '--gtk-debug=[specify GTK+ debugging flags to set]:flag' \ '--gtk-no-debug=[specify GTK+ debugging flags to unset]:flag' \ + '(-o --new-window)'{-o,--new-window}'[open a new window]' \ '(-p --page-label -i --page-index -n --named-dest)'{-p,--page-label=}'[specify page label of the document to display]' \ '(-p --page-label -i --page-index -n --named-dest)'{-i,--page-index=}'[specify page number of the document to display]' \ '(-p --page-label -i --page-index -n --named-dest)'{-n,--named-dest=}'[specify named destination to display]' \ diff --git a/Completion/X/Command/_qiv b/Completion/X/Command/_qiv index 35ceec09a..5d0aa8faf 100644 --- a/Completion/X/Command/_qiv +++ b/Completion/X/Command/_qiv @@ -10,6 +10,7 @@ _arguments -s \ '(-C --cycle)'{-C,--cycle}"[don't cycle after last image]" \ '(-w --fixed_width -W --fixed_zoom)'{-w,--fixed_width}'[use window with specified width]:width' \ '(-w --fixed_width -W --fixed_zoom)'{-W,--fixed_zoom}'[use window with specified zoom factor]:zoom (percentage)' \ + '--highDPIfactor[specify resize factor to compensate for high (or also low) DPI screens]:factor' \ '(-x -y -z --root --root_t --root_s -f --file *)'{-x,--root}'[use image as the current desktop background, centered]:image file:_files' \ '(-x -y -z --root --root_t --root_s -f --file *)'{-y,--root_t}'[use image on the current desktop background, tiled]:image file:_files' \ '(-x -y -z --root --root_t --root_s -f --file *)'{-z,--root_s}'[use image as the current desktop background, stretched]:image file:_files' \ @@ -22,6 +23,9 @@ _arguments -s \ '(-n --no_filter)'{-n,--no_filter}'[disable filtering of images by extension]' \ '(-i --no_statusbar -I --statusbar)'{-i,--no_statusbar}'[disable statusbar]' \ '(-i --no_statusbar -I --statusbar)'{-I,--statusbar}'[enable statusbar]' \ + '(-J --showJPEGcomments)'{-J,--showJPEGcomments}'[enable display of JPEG comments]' \ + '(-E --showArtistName)'{-E,--showArtistName}'[enable display of artist (author) name]' \ + "--artist_ignore[don't show specified artist name]:artist" \ '(-p --transparency)'{-p,--transparency}'[enable transparency]' \ '(-a --do_grab)'{-a,--do_grab}'[grab the pointer in windowed mode]' \ '(-G --disable_grab)'{-G,--disable_grab}'[disable pointer grabbing in fullscreen mode]' \ @@ -47,4 +51,4 @@ _arguments -s \ '(-Y --source_profile)'{-Y,--source_profile}'[specify colour profile file as source profile]:colour profile file:_files' \ '(-Z --display_profile)'{-Z,--display_profile}'[specify colour profile file as display profile]:colour profile file:_files' \ '--vikeys[enable movement with h/j/k/l]' \ - '*:image file:_files -g "*.(#i)(bmp|eim|gif|ico|jp([eg]|eg)|pcx|png|p[pngb]m|pjpeg|svg|tif(|f)|wmf|x[pb]m)(-.)"' + '*:image file:_files -g "*.(#i)(bmp|eim|gif|hei[cf]|ico|jp([eg]|eg)|pcx|png|p[pngb]m|pjpeg|svg|tif(|f)|webp|wmf|x[pb]m)(-.)"' diff --git a/Completion/X/Command/_xdvi b/Completion/X/Command/_xdvi index c33e67bcc..ed5982bcc 100644 --- a/Completion/X/Command/_xdvi +++ b/Completion/X/Command/_xdvi @@ -2,15 +2,22 @@ _xt_arguments \ -+{allowshell,copy,expert,hush{,chars,checksums,specials},keep,l,no{ghostscript,grey,gssafer,makepk,postscript,scan},safer,thorough,underlink,version} \ - +{altfont,base,browser,cr,debug,density,gamma,gspalette,hl,icongeometry,interpreter,margin,mfmode,offsets,p,paper,shrink,S,sidemargin,topmargin,xoffset,yoffset,grid{1,2,3},mgs{,1,2,3,4,5}} \ + +{altfont,background,bg,browser,cr,debug,density,dvispath,editor,gamma,gspalette,hl,icongeometry,interpreter,margin,mfmode,offsets,p,paper,shrink,S,sidemargin,topmargin,xoffset,yoffset,grid{1,2,3},mgs{,1,2,3,4,5}} \ '-altfont:default font' \ - '-base:base URL' \ + -{bg,background}':color:_x_color' \ '-browser:WWW browser:_command_names -e' \ '-cr:cursor color:_x_color' \ - '-debug:debugging bitmask:((1\:bitmaps 2\:dvi\ translation 4\:pk\ reading 8\:batch\ operation 16\:events 32\:file\ opening 64\:PostScript\ communication 128\:Kpathsea\ statistics 256\:Kpathsea\ hash\ table\ lookups 512\:Kpathsea\ path\ definitions 1024\:Kpathsea\ path\ expansion 2048\:Kpathsea\ searches))' \ + '-debug:debugging bitmask:((1\:bitmaps 2\:dvi\ translation 4\:pk\ reading 8\:batch\ operation 16\:events 32\:file\ opening 64\:PostScript\ communication 128\:Kpathsea\ statistics 256\:Kpathsea\ hash\ table\ lookups 512\:Kpathsea\ path\ definitions 1024\:Kpathsea\ path\ expansion 2048\:Kpathsea\ searches ))' \ '-density:font shrink density' \ + '-dvispath:dvips program:_command_names -e' \ + '-editor:text editor:_cmdstring' \ + '-expertmode:display bitmask:((1\:statusline 2\:scrollbars 4\:pagelist 8\:toolbar 16\:menubar))' \ + -{fg,foreground}':color:_x_color' \ + '-findstring:string' \ + '-font:font:_x_font' \ + '-fullscreen' \ '-gamma:anti-aliasing factor [1.0]' \ - -grid{1,2,3}':grid color:_x_color' \ + '-gsalpha' \ '-gspalette:Ghostscript palette:(Color Greyscale Monochrome)' \ '-hl:page highlight color:_x_color' \ '-icongeometry:icon geometry:_x_geometry' \ @@ -21,6 +28,9 @@ _xt_arguments \ '-offsets:offset size' \ '-p:font size (pixel per inch)' \ '-paper:paper size (<width>x<height> or ...):(us usr legal foolscap a1 a2 a3 a4 a5 a6 a7 b1 b2 b3 b4 b5 b6 b7 c1 c2 c3 c4 c5 c6 c7 a1r a2r a3r a4r a5r a6r a7r)' \ + '-ps2pdfpath:ps2pdf program:_command_names -e' \ + '-rulecolor:color' \ + '-rv' \ '-shrink:shrink factor' \ '-S:font shrink density' \ '-sidemargin:side margin' \ diff --git a/Completion/Zsh/Command/_cd b/Completion/Zsh/Command/_cd index 46237e73d..9ca846c8f 100644 --- a/Completion/Zsh/Command/_cd +++ b/Completion/Zsh/Command/_cd @@ -70,8 +70,15 @@ else tmpcdpath=(${${(@)cdpath:#.}:#$PWD}) - (( $#tmpcdpath )) && - alt=( 'path-directories:directory in cdpath:_path_files -W tmpcdpath -/' ) + if zstyle -t ":completion:${curcontext}:path-directories" separate-sections; then + local elem + for ((elem=1; elem <= $#tmpcdpath; elem++)); do + alt+=( "path-directories-${elem}:directory in ${tmpcdpath[$elem]}:_path_files -W 'tmpcdpath[$elem]' -/" ) + done + else + (( $#tmpcdpath )) && + alt=( 'path-directories:directory in cdpath:_path_files -W tmpcdpath -/' ) + fi # With cdablevars, we can complete foo as if ~foo/ if [[ -o cdablevars && -n "$PREFIX" && "$PREFIX" != <-> ]]; then diff --git a/Completion/Zsh/Command/_fc b/Completion/Zsh/Command/_fc index 80e570c5d..626d35956 100644 --- a/Completion/Zsh/Command/_fc +++ b/Completion/Zsh/Command/_fc @@ -40,7 +40,7 @@ fc_hist=( '(-A -R -W -e -d -E -i -t -a -p -P)-f[mm/dd/yyyy format time-stamps]' '(-A -R -W -e -d -f -i -t -a -p -P)-E[dd.mm.yyyy format time-stamps]' '(-A -R -W -e -d -f -E -t -a -p -P)-i[yyyy-mm-dd format time-stamps]' - '(-A -R -W -e -d -f -E -i -a -p -P)-t[print time-stamps in specified format]:date format' + '(-A -R -W -e -d -f -E -i -a -p -P)-t[print time-stamps in specified format]: : _date_formats zsh' '(-A -R -W -e -a -p -P)-D[print elapsed times]' '(-A -R -W -I -e -d -f -i -l -m -n -r -D -E -t -P)-a[with -p, automatically pop history on function return]' diff --git a/Completion/Zsh/Command/_kill b/Completion/Zsh/Command/_kill index b9dfde3f0..3b5c02151 100644 --- a/Completion/Zsh/Command/_kill +++ b/Completion/Zsh/Command/_kill @@ -4,9 +4,11 @@ local curcontext="$curcontext" line state ret=1 typeset -A opt_args _arguments -C \ - '(-s -l 1)-n[specify signal number]:signal number' \ - '(-n -l 1)-s[specify signal name]:signal:_signals -s' \ - '(-n -s)-l[list signal names or numbers of specified signals]:*:signal:_signals' \ + '(-s -l -L 1)-n[specify signal number]:signal number' \ + '(-l -L)-q[send the specified integer with the signal using sigqueue]:value' \ + '(-n -l -L 1)-s[specify signal name]:signal:_signals -s' \ + '-l[list signal names or numbers of specified signals]:*:signal:_signals' \ + '(- *)-L[list each signal and corresponding number]' \ '(-n -s -l)1::signal:_signals -p -s' \ '*:processes:->processes' && ret=0 diff --git a/Completion/Zsh/Command/_vared b/Completion/Zsh/Command/_vared index aba64880a..e7072ca6d 100644 --- a/Completion/Zsh/Command/_vared +++ b/Completion/Zsh/Command/_vared @@ -10,5 +10,7 @@ _arguments -s -A "-*" \ '-f+[specify finish widget]:widget:_widgets' \ '-h[allow access to history]' \ '-e[exit on EOF (^D)]' \ + '-M+[specify keymap to link to main]:keymap:compadd -a keymaps' \ + '-m+[specify keymap to link to vicmd]:keymap:compadd -a keymaps' \ '1:parameter spec:_vars' diff --git a/Completion/Zsh/Command/_zle b/Completion/Zsh/Command/_zle index 0b8ef7a15..97ec8c875 100644 --- a/Completion/Zsh/Command/_zle +++ b/Completion/Zsh/Command/_zle @@ -23,6 +23,7 @@ _arguments -s -S \ \(${(j. .)opts:#-[La]}')-l+[list user-defined widgets]:*:-:->listing' \ \(${(j. .)opts:#-l}')-a[with -l, list all widgets]' \ "(: * ${(j. .)opts:#-[Lw]})-F[install file descriptor handler]:file descriptor:_file_descriptors::handler:_functions" \ + "($opts)-I[invalidate the current zle display]" \ "!($opts)-K:keymap:compadd -a keymaps" \ "($opts)-M[display message]:message: " \ "($opts)-N[define new widget]:widget name:->widget-or-function ::widget shell function:->function" \ diff --git a/Completion/Zsh/Context/_dynamic_directory_name b/Completion/Zsh/Context/_dynamic_directory_name index f449c3b12..5e0d73a8d 100644 --- a/Completion/Zsh/Context/_dynamic_directory_name +++ b/Completion/Zsh/Context/_dynamic_directory_name @@ -1,15 +1,29 @@ #autoload +local -a dirfuncs=( + ${(k)functions[zsh_directory_name]} + $zsh_directory_name_functions +) +local descr='dynamically named directory' -local func -integer ret=1 +if (( $#dirfuncs )); then + local -a expl + local -i ret + local func suf tag=dynamically-named-directories -if [[ -n $functions[zsh_directory_name] || \ - ${+zsh_directory_name_functions} -ne 0 ]] ; then - [[ -n $functions[zsh_directory_name] ]] && zsh_directory_name c && ret=0 - for func in $zsh_directory_name_functions; do - $func c && ret=0 + [[ $ISUFFIX != \]* ]] && + suf=-S] + + _tags "$tag" + while _tags; do + while _next_label "$tag" expl "$descr" $suf; do + for func in $dirfuncs; do + $func c && ret=0 + done + done + (( ret )) || break done return ret + else - _message 'dynamic directory name: implemented as zsh_directory_name c' + _message "${descr}: implement as zsh_directory_name c" fi diff --git a/Completion/Zsh/Context/_parameter b/Completion/Zsh/Context/_parameter index 7e7788535..b08d665f5 100644 --- a/Completion/Zsh/Context/_parameter +++ b/Completion/Zsh/Context/_parameter @@ -1,3 +1,8 @@ #compdef -parameter- +if compset -P '*:'; then + _history_modifiers p + return +fi + _parameters -e diff --git a/Completion/Zsh/Context/_redirect b/Completion/Zsh/Context/_redirect index e6da5d115..520a7666e 100644 --- a/Completion/Zsh/Context/_redirect +++ b/Completion/Zsh/Context/_redirect @@ -15,4 +15,5 @@ if [[ "$CURRENT" != "1" ]]; then fi fi -_dispatch -redirect-,{${compstate[redirect]},-default-},${^strs} +_dispatch -redirect-,${compstate[redirect]},$_comp_command \ + -redirect-,{${compstate[redirect]},-default-},${^strs} diff --git a/Completion/Zsh/Type/_command_names b/Completion/Zsh/Type/_command_names index 12cbd69c1..d445be06e 100644 --- a/Completion/Zsh/Type/_command_names +++ b/Completion/Zsh/Type/_command_names @@ -4,7 +4,7 @@ # complete only external commands and executable files. This and a # `-' as the first argument is then removed from the arguments. -local args defs expl ffilt +local args defs expl ffilt verbose zstyle -t ":completion:${curcontext}:commands" rehash && rehash @@ -33,13 +33,19 @@ else defs=( "$defs[@]" 'builtins:builtin command:compadd -Qk builtins' "functions:shell function:compadd -k 'functions$ffilt'" - 'aliases:alias:compadd -Qk aliases' 'suffix-aliases:suffix alias:_suffix_alias_files' 'reserved-words:reserved word:compadd -Qk reswords' 'jobs:: _jobs -t' 'parameters:: _parameters -g "^*(readonly|association)*" -qS= -r "\n\t\- =[+"' 'parameters:: _parameters -g "*association*~*readonly*" -qS\[ -r "\n\t\- =[+"' ) + + if zstyle -T ":completion:${curcontext}:aliases" verbose; then + printf -v verbose %s:%s\ ${(@q+)${(kv)aliases}[@]//\:/\\:} + defs+=( "aliases:alias:(( $verbose ))" ) + else + defs+=( 'aliases:alias:compadd -Qk aliases' ) + fi fi args=( "$@" ) diff --git a/Completion/Zsh/Type/_globquals b/Completion/Zsh/Type/_globquals index bc3165eba..beb47ed30 100644 --- a/Completion/Zsh/Type/_globquals +++ b/Completion/Zsh/Type/_globquals @@ -268,6 +268,7 @@ case $state in "P:prepend word" "Y:+ at most ARG matches" "[:+ range of files" + ",:logical OR" "):end of qualifiers" "\::modifier" ) diff --git a/Completion/Zsh/Type/_parameters b/Completion/Zsh/Type/_parameters index b5da45c58..7b7692a3c 100644 --- a/Completion/Zsh/Type/_parameters +++ b/Completion/Zsh/Type/_parameters @@ -6,11 +6,6 @@ # If you specify a -g option with a pattern, the pattern will be used to # restrict the type of parameters matched. -if compset -P '*:'; then - _history_modifiers p - return -fi - local i pfilt local -i nm=$compstate[nmatches] local -a expl pattern=( -g \* ) normal described verbose faked fakes tmp @@ -21,7 +16,7 @@ zstyle -t ":completion:${curcontext}:parameters" prefix-needed && _description parameters expl parameter zparseopts -D -K -E g:=pattern -if zstyle -t ":completion:${curcontext}:parameters" extra-verbose; then +if zstyle -t ":completion:${curcontext}:parameters" verbose; then described=( "${(@M)${(@k)parameters[(R)$~pattern[2]~*(hideval|local|special)*]}:#$~pfilt*}" ) diff --git a/Completion/Zsh/Type/_ps1234 b/Completion/Zsh/Type/_ps1234 index 0ea2cdda9..e4391dc00 100644 --- a/Completion/Zsh/Type/_ps1234 +++ b/Completion/Zsh/Type/_ps1234 @@ -1,17 +1,18 @@ -#compdef -value-,PROMPT,-default- -value-,PROMPT2,-default- -value-,PROMPT3,-default- -value-,PROMPT4,-default- -value-,RPROMPT,-default- -value-,RPROMPT2,-default- -value-,PS1,-default- -value-,PS2,-default- -value-,PS3,-default- -value-,PS4,-default- -value-,RPS1,-default- -value-,RPS2,-default- -value-,SPROMPT,-default- +#compdef -value-,PROMPT,-default- -value-,PROMPT2,-default- -value-,PROMPT3,-default- -value-,PROMPT4,-default- -value-,RPROMPT,-default- -value-,RPROMPT2,-default- -value-,PS1,-default- -value-,PS2,-default- -value-,PS3,-default- -value-,PS4,-default- -value-,RPS1,-default- -value-,RPS2,-default- -value-,SPROMPT,-default- -value-,PROMPT_EOL_MARK,-default- -local -a specs ccol -local expl grp cols bs suf pre changed=1 ret=1 +local -a specs ccol suf +local expl grp cols bs pre changed=1 ret=1 local -A ansi [[ -z $compstate[quote] ]] && bs='\' +suf=( -S '' ) # first strip off any complete prompt specifications leaving only the # current, incomplete, one while (( changed )); do changed=0 - compset -P '%[DFK](\\|){[^}]#}' && changed=1 # formats with arg: %x{...} - compset -P '%[0-9-\\]#[^DFK(0-9-<>\\\[]' && changed=1 # normal formats + compset -P '%[DFHK](\\|){[^}]#}' && changed=1 # formats with arg: %x{...} + compset -P '%[0-9-\\]#[^DFHK(0-9-<>\\\[]' && changed=1 # normal formats compset -P '%[0-9-\\]#(<[^<]#<|>[^>]#>|\[[^\]]#\])' && changed=1 # truncations compset -P '%[0-9-\\]#(\\|)\([0-9-]#[^0-9]?|[^%]' && changed=1 # start of ternary compset -P '[^%]##' && changed=1 # sundry other characters @@ -41,15 +42,15 @@ if compset -P '%[FK]'; then grp="$expl[expl[(i)-J]+1]" print -v ccol -f "($grp)=%s=%s" ${(kv)ansi} _comp_colors+=( $ccol ) - compadd "$expl[@]" $suf $pre -k ansi && ret=0 - if (( $#suf )) && compset -P "(<->|%v)"; then + compadd "$expl[@]" "$suf[@]" $pre -k ansi && ret=0 + if [[ $ISUFFIX != (\\|)}* ]] && compset -P "(<->|%v)"; then _wanted ansi-colors expl 'closing brace' compadd -S '' \} && ret=0 elif (( $+terminfo[colors] )); then (( cols = $terminfo[colors] - 1 )) (( cols = cols > 255 ? 255 : cols )) _description -V terminal-colors expl 'terminal color' grp="$expl[expl[(i)-J]+1]" - compadd "$expl[@]" $suf $pre {0..$cols} + compadd "$expl[@]" "$suf[@]" $pre {0..$cols} for c in {0..$cols}; do _comp_colors+=( "($grp)=${c}=${${${(%):-%F{$c\}}#?\[}%m}" ) done @@ -93,11 +94,14 @@ elif compset -P '%[0-9-\\]#(\\|)\([0-9-]#'; then 'w:day of week (Sunday = 0)' ) [[ $IPREFIX != *- ]] && _describe -t ternary-prompt-expressions \ - 'ternary prompt format test character' specs $suf && ret=0 + 'ternary prompt format test character' specs "$suf[@]" && ret=0 _message -e numbers number elif compset -P '%D(\\|){'; then compset -S '(\\|)}*' _date_formats zsh && ret=0 +elif compset -P '%H(\\|){'; then + compset -S '(\\|)}*' || suf=( -S "$bs}" ) + _wanted highlight-groups expl 'highlight group' compadd "$suf[@]" -k .zle.hlgroups && ret=0 elif [[ -prefix '%' ]] || ! zstyle -t ":completion:${curcontext}:prompt-format-specifiers" prefix-needed then @@ -152,6 +156,7 @@ then 'B:start bold' 'b:stop bold' 'E:clear to end of line' + 'H{:use highlight group' 'U:start underline' 'u:stop underline' 'S:start standout' diff --git a/Completion/compdump b/Completion/compdump index 6daf92f9f..5af5174f1 100644 --- a/Completion/compdump +++ b/Completion/compdump @@ -113,7 +113,7 @@ integer _i=5 print -n autoload -Uz >& $_d_fd while (( $#_d_als )); do if (( ! $+_compautos[$_d_als[1]] )); then - print -n " $_d_als[1]" + print -rn " ${(q-)_d_als[1]}" if (( ! --_i && $#_d_als > 1 )); then _i=5 print -n ' \\\n ' @@ -126,13 +126,13 @@ print >& $_d_fd local _c for _c in "${(ok@)_compautos}"; do - print "autoload -Uz $_compautos[$_c] $_c" >& $_d_fd + print -r "autoload -Uz ${(q-)_compautos[$_c]} $_c" >& $_d_fd done print >& $_d_fd print "typeset -gUa _comp_assocs" >& $_d_fd -print "_comp_assocs=( ${(qq)_comp_assocs} )" >& $_d_fd +print -r "_comp_assocs=( ${(qq)_comp_assocs} )" >& $_d_fd exec {_d_fd}>&- mv -f $_d_file ${_d_file%.$HOST.$$} diff --git a/Completion/compinit b/Completion/compinit index 5cb527fac..51e9d88b8 100644 --- a/Completion/compinit +++ b/Completion/compinit @@ -301,7 +301,7 @@ compdef() { if [[ -z "$eval" ]] && [[ "$1" = *\=* ]]; then while (( $# )); do if [[ "$1" = *\=* ]]; then - cmd="${1%%\=*}" + cmd="${(q)${1%%\=*}}" svc="${1#*\=}" func="$_comps[${_services[(r)$svc]:-$svc}]" [[ -n ${_services[$svc]} ]] && @@ -412,7 +412,7 @@ compdef() { svc= fi if [[ -z "$new" || -z "${_comps[$1]}" ]]; then - _comps[$cmd]="$func" + _comps[$cmd]="${(q)func}" [[ -n "$svc" ]] && _services[$cmd]="${1#*\=}" fi ;; |