path: root/converter/other/pamtogif.c

/*=============================================================================
                              pamtogif
===============================================================================
  Convert a Netpbm image to GIF

  History and copyright information is at the end of the file.
=============================================================================*/

#include <assert.h>
#include <string.h>
#include <stdbool.h>

#include "pm_c_util.h"
#include "mallocvar.h"
#include "shhopt.h"
#include "nstring.h"
#include "pam.h"
#include "pammap.h"

#define MAXCMAPSIZE 256

static bool verbose;


enum TransparencyType {TRANS_NONE, TRANS_COLOR, TRANS_ALPHA};
    /* The source of transparency for the GIF: nothing is transparent,
       All pixels of a certain color are transparent, or the alpha plane
       in the input tells what is transparent.
    */

typedef unsigned int StringCode;
    /* A code to be place in the GIF raster.  It represents
       a string of one or more pixels.  You interpret this in the context
       of a current code size.  The lower half of the values representable
       in the current code size represent singleton strings and the value
       is simply the value of the one pixel in the string.  The first two
       values in the upper half of the range are the clear code and EOF
       code, respectively.  The rest of the values represent multi-pixel
       strings.  The mapping between value and the sequence of pixels
       changes throughout the image.

       Ergo, this data structure must be at least BITS bits wide.
    */


struct Cmap {
    /* This is the information for the GIF colormap (aka palette). */

    struct pam pam;
        /* Gives depth and maxval for colors in color[] */
    tuple color[MAXCMAPSIZE];
        /* Maps a color index, as is found in the raster part of the
           GIF, to color.
        */
    unsigned int cmapSize;
        /* Number of entries in the GIF colormap.  I.e. number of colors
           in the image, plus possibly one fake transparency color.
        */
    bool haveTransparent;
        /* The colormap contains an entry for transparent pixels */
    unsigned int transparent;
        /* color index number in GIF palette of the color that is to
           be transparent.

           Meaningful only if 'haveTransparent' is true.
        */
    tuplehash tuplehash;
        /* A hash table to translate color to GIF colormap index. */
};

struct CmdlineInfo {
    /* All the information the user supplied in the command line,
       in a form easy for the program to use.
    */
    const char *input_filespec; /* Filespec of input file */
    const char *alphacolor;     /* -alphacolor option value or default */
    unsigned int interlace;     /* -interlace option value */
    unsigned int sort;          /* -sort option value */
    const char *mapfile;        /* -mapfile option value.  NULL if none. */
    const char *transparent;    /* -transparent option value.  NULL if none. */
    const char *comment;        /* -comment option value; NULL if none */
    unsigned int nolzw;         /* -nolzw option */
    unsigned int noclear;       /* -noclear option */
    float aspect;               /* -aspect option value (the ratio).  */
    unsigned int verbose;
};





static unsigned int
pamAlphaPlane(struct pam * const pamP) {
/*----------------------------------------------------------------------------
   The number of the alpha plane, or zero if there is no alpha plane, as
   indicated by *pamP.

   Note that the alpha plane is never zero in any Netpbm tuple type.
-----------------------------------------------------------------------------*/
    unsigned int alphaPlane;

    if (streq(pamP->tuple_type, "RGB_ALPHA"))
        alphaPlane = 3;
    else if (streq(pamP->tuple_type, "GRAYSCALE_ALPHA"))
        alphaPlane = 1;
    else if (streq(pamP->tuple_type, "BLACKANDWHITE_ALPHA"))
        alphaPlane = 1;
    else
        alphaPlane = 0;

    if (alphaPlane >= pamP->depth)
        pm_error("Tuple type is '%s', but depth (%u) is less than %u",
                 pamP->tuple_type, pamP->depth, alphaPlane + 1);

    return alphaPlane;
}



static void
parseCommandLine(int argc, const char ** argv,
                 struct CmdlineInfo * const cmdlineP) {
/*----------------------------------------------------------------------------
   Parse the program arguments (given by argc and argv) into a form
   the program can deal with more easily -- a cmdline_info structure.
   If the syntax is invalid, issue a message and exit the program via
   pm_error().

   Note that the file spec array we return is stored in the storage that
   was passed to us as the argv array.
-----------------------------------------------------------------------------*/
    optEntry * option_def;  /* malloc'ed */
    optStruct3 opt;  /* set by OPTENT3 */
    unsigned int option_def_index;

    unsigned int aspectSpec;

    MALLOCARRAY_NOFAIL(option_def, 100);

    option_def_index = 0;   /* incremented by OPTENT3 */
    OPTENT3(0,   "interlace",   OPT_FLAG,
            NULL,                       &cmdlineP->interlace, 0);
    OPTENT3(0,   "sort",        OPT_FLAG,
            NULL,                       &cmdlineP->sort, 0);
    OPTENT3(0,   "nolzw",       OPT_FLAG,
            NULL,                       &cmdlineP->nolzw, 0);
    OPTENT3(0,   "noclear",     OPT_FLAG,
            NULL,                       &cmdlineP->noclear, 0);
    OPTENT3(0,   "mapfile",     OPT_STRING,
            &cmdlineP->mapfile,        NULL, 0);
    OPTENT3(0,   "transparent", OPT_STRING,
            &cmdlineP->transparent,    NULL, 0);
    OPTENT3(0,   "comment",     OPT_STRING,
            &cmdlineP->comment,        NULL, 0);
    OPTENT3(0,   "alphacolor",  OPT_STRING,
            &cmdlineP->alphacolor,     NULL, 0);
    OPTENT3(0,   "aspect",      OPT_FLOAT,
            &cmdlineP->aspect,         &aspectSpec, 0);
    OPTENT3(0,   "verbose",     OPT_FLAG,
            NULL,                      &cmdlineP->verbose, 0);

    /* Set the defaults */
    cmdlineP->mapfile = NULL;
    cmdlineP->transparent = NULL;  /* no transparency */
    cmdlineP->comment = NULL;      /* no comment */
    cmdlineP->alphacolor = "rgb:0/0/0";
        /* We could say "black" here, but then we depend on the color names
           database existing.
        */

    opt.opt_table = option_def;
    opt.short_allowed = FALSE;  /* We have no short (old-fashioned) options */
    opt.allowNegNum = FALSE;  /* We have no parms that are negative numbers */

    pm_optParseOptions4(&argc, argv, opt, sizeof(opt), 0);
        /* Uses and sets argc, argv, and some of *cmdlineP and others. */

    if (argc-1 == 0)
        cmdlineP->input_filespec = "-";
    else if (argc-1 != 1)
        pm_error("Program takes zero or one argument (filename).  You "
                 "specified %d", argc-1);
    else
        cmdlineP->input_filespec = argv[1];

    if (aspectSpec) {
        if (cmdlineP->aspect < 0.25  || cmdlineP->aspect > 4.21875)
            pm_error("Invalid -aspect value: %f.  "
                     "GIF allows only the range 0.25-4.0 .",
                     cmdlineP->aspect);
        else if (cmdlineP->aspect > 4.0)
            pm_message("Warning: "
                       "You specified an aspect ratio over 4.0: %f.  "
                       "This will result in an invalid GIF.",
                       cmdlineP->aspect);
    } else
        cmdlineP->aspect = 1.0;
}



/*
 * Write out a word to the GIF file
 */
static void
Putword(int const w, FILE * const fp) {

    fputc( w & 0xff, fp );
    fputc( (w / 256) & 0xff, fp );
}



static int
closestColor(tuple               const color,
             struct pam *        const pamP,
             const struct Cmap * const cmapP) {
/*----------------------------------------------------------------------------
   Return the colormap index of the color in the colormap *cmapP
   that is closest to the color 'color', whose format is specified by
   *pamP.

   Also add 'color' to the colormap hash, with the colormap index we
   are returning.  Caller must ensure that the color is not already in
   there.
-----------------------------------------------------------------------------*/
    unsigned int const nComp = pamP->depth >= 3 ? 3 : 1;
        /* Number of color components (not alpha) in 'color' */

    unsigned int i;
    unsigned int imin, dmin;
    int fits;

    dmin = UINT_MAX;
    imin = 0;
    for (i = 0; i < cmapP->cmapSize; ++i) {
        unsigned int distance;
        unsigned int plane;

        for (distance = 0, plane = 0; plane < nComp; ++plane)
            /* Divide by 4 is to avoid arithmetic overflow */
            distance += SQR(color[plane] - cmapP->color[i][plane]) / 4;

        if (distance < dmin) {
            dmin = distance;
            imin = i;
        }
    }
    pnm_addtotuplehash(pamP, cmapP->tuplehash, color, imin, &fits);

    return imin;
}



enum pass {MULT8PLUS0, MULT8PLUS4, MULT4PLUS2, MULT2PLUS1};


typedef struct {
    struct pam pam;
        /* Description of input file/image.  The position of the file
           is also part of the state of this rowReader.
        */
    pm_filepos rasterPos;
        /* Position in file fileP of the start of the raster */
    bool interlace;
        /* We're accessing the image in interlace fashion */
    bool eof;
        /* The image is at EOF (we have returned all of the rows) */
    unsigned int nextRow;
        /* Number of row to which input file is positioned;
           meaningless if 'eof'.
        */
    enum pass pass;
        /* The interlace pass.  Undefined if !interlace */
    tuple * discardBuffer;
        /* A bitbucket for rows we read in order to advance the file
           position.
        */
} RowReader;



static RowReader *
rowReader_create(struct pam * const pamP,
                 pm_filepos   const rasterPos,
                 bool         const interlace) {

    RowReader * rdrP;

    MALLOCVAR_NOFAIL(rdrP);

    rdrP->pam         = *pamP;
    rdrP->rasterPos   = rasterPos;
    rdrP->interlace   = interlace;
    rdrP->eof         = FALSE;
    rdrP->pass        = MULT8PLUS0;

    pm_seek2(rdrP->pam.file, &rasterPos, sizeof(rasterPos));
    rdrP->nextRow = 0;

    rdrP->discardBuffer = pnm_allocpamrow(&rdrP->pam);

    return rdrP;
}



static void
rowReader_destroy(RowReader * const rdrP) {

    pnm_freepamrow(rdrP->discardBuffer);
    free(rdrP);
}



static void
rowReader_skipRows(RowReader *  const rdrP,
                  unsigned int const rowCount,
                  bool *       const eofP) {
/*----------------------------------------------------------------------------
   Skip over the next 'rowCount' rows of the input file.

   Iff there aren't at least 'rowCount' rows left, return *eofP == TRUE.
-----------------------------------------------------------------------------*/
    if (rdrP->nextRow + rowCount >= rdrP->pam.height)
        *eofP = TRUE;
    else {
        /* This could be made faster if need be by adding a libnetpbm
           row skip function.  Except with the plain formats, that could
           just compute the next row position and fseek() to it.
           pnm_readpamrow() with NULL for the output pointer would be a
           good interface for a row skip function.
        */
        unsigned int i;

        *eofP = FALSE;

        for (i = 0; i < rowCount; ++i)
            pnm_readpamrow(&rdrP->pam, rdrP->discardBuffer);

        rdrP->nextRow += rowCount;
    }
}



static void
rowReader_gotoNextInterlaceRow(RowReader * const rdrP) {
/*----------------------------------------------------------------------------
  Position reader to the next row in the interlace pattern, assuming it
  is now positioned immediately after the current row.
-----------------------------------------------------------------------------*/
    bool endOfPass;

    /* There are 4 passes:
       MULT8PLUS0: Rows 0, 8, 16, 24, 32, etc.
       MULT8PLUS4: Rows 4, 12, 20, 28, etc.
       MULT4PLUS2: Rows 2, 6, 10, 14, etc.
       MULT2PLUS1: Rows 1, 3, 5, 7, 9, etc.
    */

    switch (rdrP->pass) {
    case MULT8PLUS0:
        rowReader_skipRows(rdrP, 7, &endOfPass);
        break;
    case MULT8PLUS4:
        rowReader_skipRows(rdrP, 7, &endOfPass);
        break;
    case MULT4PLUS2:
        rowReader_skipRows(rdrP, 3, &endOfPass);
        break;
    case MULT2PLUS1:
        rowReader_skipRows(rdrP, 1, &endOfPass);
        break;
    }

    /* Note that if there are more than 4 rows, the sequence of passes
       is sequential, but when there are fewer than 4, reading may skip
       e.g. from MULT8PLUS0 to MULT4PLUS2.
    */
    while (endOfPass && !rdrP->eof) {
        pm_seek2(rdrP->pam.file, &rdrP->rasterPos, sizeof(rdrP->rasterPos));
        rdrP->nextRow = 0;

        switch (rdrP->pass) {
        case MULT8PLUS0:
            rdrP->pass = MULT8PLUS4;
            rowReader_skipRows(rdrP, 4, &endOfPass);
            break;
        case MULT8PLUS4:
            rdrP->pass = MULT4PLUS2;
            rowReader_skipRows(rdrP, 2, &endOfPass);
            break;
        case MULT4PLUS2:
            rdrP->pass = MULT2PLUS1;
            rowReader_skipRows(rdrP, 1, &endOfPass);
            break;
        case MULT2PLUS1:
            rdrP->eof = TRUE;
            break;
        }
    }
}



static void
rowReader_gotoNextStraightRow(RowReader * const rdrP) {
/*----------------------------------------------------------------------------
  Position reader to the next row in a straight, non-interlace
  pattern, assuming the file is now positioned immediately after the
  current row.

  This is trivial, since the next row _is_ immediately after the current
  row, except in the case that there are no more rows.
-----------------------------------------------------------------------------*/
    if (rdrP->nextRow >= rdrP->pam.height)
        rdrP->eof = TRUE;
}



static void
rowReader_read(RowReader * const rdrP,
               tuple *     const tuplerow) {

    if (rdrP->eof)
        pm_error("INTERNAL ERROR: rowReader attempted to read beyond end "
                 "of image");

    pnm_readpamrow(&rdrP->pam, tuplerow);
    ++rdrP->nextRow;

    if (rdrP->interlace)
        rowReader_gotoNextInterlaceRow(rdrP);
    else
        rowReader_gotoNextStraightRow(rdrP);
}



static unsigned int
gifPixel(struct pam *        const pamP,
         tuple               const tuple,
         unsigned int        const alphaPlane,
         sample              const alphaThreshold,
         const struct Cmap * const cmapP) {
/*----------------------------------------------------------------------------
   Return the colormap index of the tuple 'tuple', whose format is described
   by *pamP, using colormap *cmapP.

   'alphaPlane' is the number of the plane in 'tuple' to use for transparency,
   or zero if we aren't to use any plane for transparency.  (note that Caller
   cannot specify plane 0 for transparency).

   'alphaThreshold' is the alpha level below which we consider a pixel
   transparent for GIF purposes.

   If 'alphaPlane' is nonzero, we assume *cmapP contains a transparent
   entry.
-----------------------------------------------------------------------------*/
    int colorIndex;

    if (alphaPlane && tuple[alphaPlane] < alphaThreshold) {
        assert(cmapP->haveTransparent);
        colorIndex = cmapP->transparent;
    } else {
        int found;

        pnm_lookuptuple(pamP, cmapP->tuplehash, tuple,
                        &found, &colorIndex);

        if (!found)
            colorIndex = closestColor(tuple, pamP, cmapP);
    }
    assert(colorIndex >= 0);
    return (unsigned int) colorIndex;
}



static void
writeTransparentColorIndexExtension(FILE *       const ofP,
                                    unsigned int const transColorIndex) {
/*----------------------------------------------------------------------------
   Write out extension for transparent color index.
-----------------------------------------------------------------------------*/
    fputc('!',  ofP);
    fputc(0xf9, ofP);
    fputc(4,    ofP);
    fputc(1,    ofP);
    fputc(0,    ofP);
    fputc(0,    ofP);
    fputc(transColorIndex, ofP);
    fputc(0,    ofP);
}



static void
writeCommentExtension(FILE * const ofP,
                      char   const comment[]) {
/*----------------------------------------------------------------------------
   Write out extension for a comment
-----------------------------------------------------------------------------*/
    unsigned int const maxSegmentSize = 255;

    const char * segment;

    fputc('!',  ofP);   /* Identifies an extension */
    fputc(0xfe, ofP);   /* Identifies a comment */

    /* Write it out in segments no longer than 255 characters */
    for (segment = &comment[0];
         segment < comment + strlen(comment);
         segment += maxSegmentSize) {

        unsigned int const lengthThisSegment =
            MIN(maxSegmentSize, strlen(segment));

        fputc(lengthThisSegment, ofP);

        fwrite(segment, 1, lengthThisSegment, ofP);
    }

    fputc(0, ofP);   /* No more comment blocks in this extension */
}



/***************************************************************************
 *
 *  GIFCOMPR.C       - GIF Image compression routines
 *
 *  Lempel-Ziv compression based on 'compress'.  GIF modifications by
 *  David Rowley (mgardi@watdcsu.waterloo.edu)
 *
 ***************************************************************************/

/*
 * General DEFINEs
 */

#define BITS    12

/*
 *
 * GIF Image compression - modified 'compress'
 *
 * Based on: compress.c - File compression ala IEEE Computer, June 1984.
 *
 * By Authors:  Spencer W. Thomas       (decvax!harpo!utah-cs!utah-gr!thomas)
 *              Jim McKie               (decvax!mcvax!jim)
 *              Steve Davies            (decvax!vax135!petsd!peora!srd)
 *              Ken Turkowski           (decvax!decwrl!turtlevax!ken)
 *              James A. Woods          (decvax!ihnp4!ames!jaw)
 *              Joe Orost               (decvax!vax135!petsd!joe)
 *
 */


static StringCode const maxCodeLimitLzw = (StringCode)1 << BITS;
       /* One beyond the largest string code that can exist in GIF */
       /* Used only in assertions  */


struct HashTableEntry {
    /* This is an entry in the string table, which is a hash table.  It says
       that the string code 'combinedString' represents the string which is
       the single pixel 'additionalPixel' appended to 'baseString', where
       'baseString' may represent a multi-pixel string.
    */
    bool present;
        /* There is an entry here.  Following members are meaningless if
           not.
        */
    StringCode baseString;
    StringCode additionalPixel;
    StringCode combinedString;
};



/***************************************************************************
*                          BYTE OUTPUTTER
***************************************************************************/

typedef struct {
    FILE * fileP;  /* The file to which to output */
    unsigned int count;
        /* Number of bytes so far in the current data block */
    unsigned char buffer[256];
        /* The current data block, under construction */
} ByteBuffer;



static ByteBuffer *
byteBuffer_create(FILE * const fileP) {

    ByteBuffer * byteBufferP;

    MALLOCVAR_NOFAIL(byteBufferP);

    byteBufferP->fileP = fileP;
    byteBufferP->count = 0;

    return byteBufferP;
}



static void
byteBuffer_destroy(ByteBuffer * const byteBufferP) {

    free(byteBufferP);
}



static void
byteBuffer_flush(ByteBuffer * const byteBufferP) {
/*----------------------------------------------------------------------------
   Write the current data block to the output file, then reset the current
   data block to empty.
-----------------------------------------------------------------------------*/
    if (byteBufferP->count > 0 ) {
        if (verbose)
            pm_message("Writing %u byte block", byteBufferP->count);
        fputc(byteBufferP->count, byteBufferP->fileP);
        fwrite(byteBufferP->buffer, 1, byteBufferP->count, byteBufferP->fileP);
        byteBufferP->count = 0;
    }
}



static void
byteBuffer_flushFile(ByteBuffer * const byteBufferP) {

    fflush(byteBufferP->fileP);

    if (ferror(byteBufferP->fileP))
        pm_error("error writing output file");
}



static void
byteBuffer_out(ByteBuffer *  const byteBufferP,
               unsigned char const c) {
/*----------------------------------------------------------------------------
  Add a byte to the end of the current data block, and if it is now 255
  characters, flush the data block to the output file.
-----------------------------------------------------------------------------*/
    byteBufferP->buffer[byteBufferP->count++] = c;
    if (byteBufferP->count >= 255)
        byteBuffer_flush(byteBufferP);
}



/***************************************************************************
*                          GIF CODE OUTPUTTER
***************************************************************************/

typedef struct {
    ByteBuffer * byteBufferP;
    unsigned int initBits;
    unsigned int nBits;
        /* Number of bits to put in output for each code */
    StringCode maxCode;                  /* maximum code, given n_bits */
    StringCode maxCodeLimit;
        /* LZW: One beyond the largest string code that can exist in GIF.
           Uncompressed: a ceiling to prevent code size from ratcheting up.
           In either case, output code never reaches this value.
        */
    unsigned long curAccum;
    unsigned int curBits;
    unsigned int stringCount;
        /* Number of strings that have been output to this buffer (by writing
           a string code) since the last flush (or ever, if no last flush).
           Note that this counts only strings that go into the buffer; it
           doesn't matter if they have gone out the other side yet.  The main
           use of this is debugging -- when something fails, you can see in a
           debugger where in the image it was, then set a trap for there.
        */
} CodeBuffer;



static CodeBuffer *
codeBuffer_create(FILE *       const ofP,
                  unsigned int const initBits,
                  bool         const lzw) {

    CodeBuffer * codeBufferP;

    MALLOCVAR_NOFAIL(codeBufferP);

    codeBufferP->initBits    = initBits;
    codeBufferP->nBits       = codeBufferP->initBits;
    codeBufferP->maxCode     = (1 << codeBufferP->nBits) - 1;
    codeBufferP->maxCodeLimit = lzw ?
        (StringCode)1 << BITS : (StringCode) (1 << codeBufferP->nBits) - 1;
    codeBufferP->byteBufferP = byteBuffer_create(ofP);
    codeBufferP->curAccum    = 0;
    codeBufferP->curBits     = 0;
    codeBufferP->stringCount = 0;

    return codeBufferP;
}



static void
codeBuffer_destroy(CodeBuffer * const codeBufferP) {

    byteBuffer_destroy(codeBufferP->byteBufferP);

    free(codeBufferP);
}



static void
codeBuffer_resetCodeSize(CodeBuffer * const codeBufferP) {

    codeBufferP->nBits = codeBufferP->initBits;

    assert(codeBufferP->nBits <= BITS);

    codeBufferP->maxCode = (1 << codeBufferP->nBits) - 1;
}



static void
codeBuffer_increaseCodeSize(CodeBuffer * const codeBufferP) {

    ++codeBufferP->nBits;

    assert(codeBufferP->nBits <= BITS);

    codeBufferP->maxCode = (1 << codeBufferP->nBits) - 1;
}



static void
codeBuffer_output(CodeBuffer * const codeBufferP,
                  StringCode   const code) {
/*----------------------------------------------------------------------------
   Output one GIF code to the file, through the code buffer.

   The code is represented as N bits in the file -- the lower
   N bits of 'code'.  N is a the current code size of *codeBufferP.
-----------------------------------------------------------------------------*/
    assert (code <= codeBufferP->maxCode);

    codeBufferP->curAccum &= (1 << codeBufferP->curBits) - 1;

    if (codeBufferP->curBits > 0)
        codeBufferP->curAccum |= ((unsigned long)code << codeBufferP->curBits);
    else
        codeBufferP->curAccum = code;

    codeBufferP->curBits += codeBufferP->nBits;

    while (codeBufferP->curBits >= 8) {
        byteBuffer_out(codeBufferP->byteBufferP,
                       codeBufferP->curAccum & 0xff);
        codeBufferP->curAccum >>= 8;
        codeBufferP->curBits -= 8;
    }

    ++codeBufferP->stringCount;
}



static void
codeBuffer_flush(CodeBuffer * const codeBufferP) {

    /* Output the possible partial byte in the buffer */

    if (codeBufferP->curBits > 0) {
        byteBuffer_out(codeBufferP->byteBufferP,
                       codeBufferP->curAccum & 0xff);
        codeBufferP->curBits = 0;
    }
    byteBuffer_flush(codeBufferP->byteBufferP);

    byteBuffer_flushFile(codeBufferP->byteBufferP);

    if (verbose)
        pm_message("%u strings of pixels written to file",
                   codeBufferP->stringCount);
    codeBufferP->stringCount = 0;
}



typedef struct {
    CodeBuffer * codeBufferP;
        /* The place to which we write our string codes.

           Constant.
        */
    bool lzw;
        /* We're actually doing LZW compression.  False means we follow
           the algorithm enough that an LZW decompressor will recover the
           proper data, but always using one code per pixel, and therefore
           not effecting any compression and not using the LZW patent.
        */
    bool noclear;
        /* Never put a clear code in the output.  Ergo don't recompute the
           string table from current input.  When the string table fills up,
           continue using that table for the rest of the image.
        */
    unsigned int hsize;
        /* The number of slots in the hash table.  This variable to
           enhance overall performance by reducing memory use when
           encoding smaller gifs.
         */
    unsigned int hshift;
        /* This is how many bits we shift left a string code in forming the
           primary hash of the concatenation of that string with another.
           Constant.
        */

    /* Codes less than 'clearCode' are singleton pixel codes - each
       represents the pixel value equal to it.

       Codes greater than 'eofCode' are multipixel string codes.  Each
       represents a string of pixels that is defined by the preceding
       stream.
    */
    StringCode clearCode;
        /* The code in an LZW stream that means to clear the string
           dictionary and start fresh.

           Constant.
        */
    StringCode eofCode;
        /* The code in an LZW stream that means there's no more coming

           Constant.
        */
    StringCode initCodeLimit;
        /* The value of 'codeLimit' at the start of a block.

           Constant.
        */
    StringCode codeLimit;
        /* One beyond the maximum code possible with the current code
           size.
        */
    struct HashTableEntry * hashTable;
    StringCode nextCodeToDefine;
        /* The next string code the GIF protocol will define.  It will do this
           the next time we emit a string code.
        */
    StringCode stringSoFar;
        /* The code for the string we have built so far.  This code indicates
           one or more pixels that we have encoded but not yet output
           because we're hoping to match an even longer string.

           Valid only when 'buildingString' is true.

           In the non-lzw case the single pixel to output.
        */
    bool buildingString;
        /* We are in the middle of building a string; 'stringSoFar' describes
           the pixels in it so far.  The only time this is false is at the
           very beginning of the stream.

           Ignored in the non-lzw case.
        */
    bool reportedNoclear;
        /* We have reported to Standard Error that the string table filled up
           and we elected not to clear it.
        */
} LzwCompressor;




static unsigned int
nSignificantBits(unsigned int const arg){

#if HAVE_GCC_BITCOUNT

    return (arg == 0) ? 0 : 8 * sizeof(unsigned int) - __builtin_clz(arg);

#else

    unsigned int i = 0;
    while (arg >> i != 0)
        ++i;

    return i;
#endif
}



static LzwCompressor *
lzw_create(FILE *       const ofP,
           unsigned int const initBits,
           bool         const lzw,
           bool         const noclear,
           unsigned int const pixelCount) {

    unsigned int const hsizeTable[] = {257, 521, 1031, 2053, 4099, 5003};
    /* If the image has 4096 or fewer pixels we use prime numbers slightly
       above powers of two between 8 and 12.  In this case the hash table
       never fills up; clear code is never emitted.

       Above that we use a table with 4096 slots plus 20% extra.
       When this is not enough the clear code is emitted.
       Because of the extra 20% the table itself never fills up.

       lzw.hsize and lzw.hshift stay constant through the image.

       Variable hsize is a performance enhancement based on the fact that
       the encoder never needs more codes than the number of pixels in
       the image.  Typically, the ratio of pixels to codes is around
       10:1 to 20:1.

       Logic works with fixed values lzw.hsize=5003 and t=13.
    */

    LzwCompressor * lzwP;

    MALLOCVAR_NOFAIL(lzwP);

    /* Constants */
    lzwP->lzw     = lzw;
    lzwP->noclear = noclear;

    lzwP->clearCode     = 1 << (initBits - 1);
    lzwP->eofCode       = lzwP->clearCode + 1;
    lzwP->initCodeLimit = 1 << initBits;

    if (lzw) {
        unsigned int const t =
            MIN(13, MAX(8, nSignificantBits(pixelCount +lzwP->eofCode - 2)));
            /* Index into hsizeTable */

        lzwP->hsize = hsizeTable[t-8];

        lzwP->hshift = (t == 13 ? 12 : t) - nSignificantBits(MAXCMAPSIZE-1);

        MALLOCARRAY(lzwP->hashTable, lzwP->hsize);

        if (lzwP->hashTable == NULL)
            pm_error("Couldn't get memory for %u-entry hash table.",
                     lzwP->hsize);
    } else {
        /* No LZW compression.  We don't need a stringcode hash table */
        lzwP->hashTable = NULL;
        lzwP->hsize     = 0;
    }

    lzwP->buildingString = FALSE;

    lzwP->codeBufferP = codeBuffer_create(ofP, initBits, lzw);

    lzwP->reportedNoclear = false;

    return lzwP;
}



static void
lzw_destroy(LzwCompressor * const lzwP) {

    codeBuffer_destroy(lzwP->codeBufferP);

    free(lzwP->hashTable);

    free(lzwP);
}



static void
lzwHashClear(LzwCompressor * const lzwP) {

    /* Empty the code table */

    unsigned int i;

    for (i = 0; i < lzwP->hsize; ++i)
        lzwP->hashTable[i].present = false;

    lzwP->nextCodeToDefine = lzwP->clearCode + 2;
}



static void
lzw_reportNoclear(LzwCompressor * const lzwP) {

    if (verbose && !lzwP->reportedNoclear) {
        pm_message("String table filled up.  Not starting a new one "
                   "because of noclear mode");
        lzwP->reportedNoclear = true;
    }
}



static void
lzw_clearBlock(LzwCompressor * const lzwP) {
/*----------------------------------------------------------------------------
  Insert a string table clear in the stream.  Clear our table and set it up to
  start building again, and emit the code to tell the decoder we're doing it
  so he can do the same.
-----------------------------------------------------------------------------*/
    lzwHashClear(lzwP);

    codeBuffer_output(lzwP->codeBufferP, lzwP->clearCode);

    codeBuffer_resetCodeSize(lzwP->codeBufferP);

    lzwP->codeLimit = lzwP->initCodeLimit;
}



static void
lzwAdjustCodeSize(LzwCompressor * const lzwP,
                  StringCode      const newCode) {
/*----------------------------------------------------------------------------
   Assuming we just defined code 'newCode', increase the code size as
   required so that this code fits.

   The decompressor is mimicking our assignment of that code, so knows that
   we are making this adjustment, so expects codes of the new size.
-----------------------------------------------------------------------------*/
    assert(newCode <= lzwP->codeLimit);

    if (newCode == lzwP->codeLimit) {
        lzwP->codeLimit *= 2;
        codeBuffer_increaseCodeSize(lzwP->codeBufferP);

        assert(lzwP->codeLimit <= maxCodeLimitLzw);
    }
}



static void
lzwOutputCurrentString(LzwCompressor * const lzwP) {
/*----------------------------------------------------------------------------
   Put a code for the currently built-up string in the output stream.

   Doing this causes the protocol to define a new string code, defined as the
   string we put plus the first pixel of the next string we put.  (It almost
   seems to violate causality, especially since the next string we put can
   legally be the very string code that gets defined here, but it actually
   works).

   The code that gets defined is lzwP->nextCodeToDefine.  Caller is
   responsible for figuring out the value for the code (i.e. what we just said
   above) so it can use the code in the future.

   BUT: if the string table has reached its maximum size, issue a clear code
   instead to cause the protocol to forget all the defined string coes and
   start its table over (so Caller must start its own table over too).
   EXCEPT: if we're running in no-clear mode; then we skip the clear code (so
   the protocol maintains all the string code definitions and caller will have
   to do so as well).

   Note that in the non-compressing case, the overall limit is small enough to
   prevent us from ever defining string codes; we'll always issue the clear
   code.

   Note that there is a case where Caller can just ignore the fact that we
   cause the protocol to define a new string code: where the string we're
   outputting is the last one in the stream.  In that case, the new string
   code we define is irrelevant; it will never be used.
-----------------------------------------------------------------------------*/
    codeBuffer_output(lzwP->codeBufferP, lzwP->stringSoFar);

    if (lzwP->nextCodeToDefine < lzwP->codeBufferP->maxCodeLimit) {
        /* Record that the protocol defined a new string code, to wit
           the numerically next one, when we did the output to the stream
           above, and adjust the code size if this code is too wide to
           fit in the current size.
        */
        StringCode const newCode = lzwP->nextCodeToDefine++;

        lzwAdjustCodeSize(lzwP, newCode);
    } else {
        if (lzwP->noclear)
            lzw_reportNoclear(lzwP);
        else {
            /* Forget all the strings so far; start building again; tell
               decompressor to do the same.
            */
            lzw_clearBlock(lzwP);

            if (verbose)
                pm_message("String table filled up.  "
                           "Clearing and starting over");
        }
    }
}



static void
lzw_flush(LzwCompressor * const lzwP) {

    if (lzwP->lzw)
        lzwOutputCurrentString(lzwP);
        /* Put out the code for the final string. */

    codeBuffer_output(lzwP->codeBufferP, lzwP->eofCode);

    codeBuffer_flush(lzwP->codeBufferP);
}



static unsigned int
primaryHash(StringCode   const baseString,
            StringCode   const additionalPixel,
            unsigned int const hshift) {

    unsigned int hash;

    assert(baseString < maxCodeLimitLzw);
    assert(additionalPixel < MAXCMAPSIZE);

    hash = (additionalPixel << hshift) ^ baseString;

    return hash;
}



static void
lookupInHash(LzwCompressor *  const lzwP,
             unsigned int     const gifPixel,
             bool *           const foundP,
             StringCode *     const codeP,
             unsigned int *   const hashP) {

    unsigned int disp;
        /* secondary hash stride (after G. Knott) */
    unsigned int hash;
        /* Index into hash table */

    hash = primaryHash(lzwP->stringSoFar, gifPixel, lzwP->hshift);
    assert(hash < lzwP->hsize);
    disp = (hash == 0) ? 1 : lzwP->hsize - hash;

    while (lzwP->hashTable[hash].present &&
           (lzwP->hashTable[hash].baseString != lzwP->stringSoFar ||
            lzwP->hashTable[hash].additionalPixel != gifPixel)) {
        if (hash < disp)
            hash += lzwP->hsize;
        assert(hash >= disp);
        hash -= disp;
        assert(hash < lzwP->hsize);
    }

    if (lzwP->hashTable[hash].present) {
        /* Found fcode in hash table */
        *foundP = true;
        *codeP  = lzwP->hashTable[hash].combinedString;
    } else {
        /* Found where it _should_ be (but it's not) with primary hash */
        *foundP = false;
        *hashP  = hash;
    }
}



static void
lzw_encodePixel(LzwCompressor * const lzwP,
                unsigned int    const gifPixel) {

    assert(gifPixel < 256);

    if (!lzwP->buildingString) {
        /* Start a new string with just this pixel */
        lzwP->stringSoFar = gifPixel;
        lzwP->buildingString = true;
    } else {
        bool found;
            /* There's a code for the current string in the string table */
        StringCode code;
            /* Existing code for the current string in the string table, if
               any
            */
        unsigned int hash;
            /* Index into hash table where the entry for the new string code
               should go; meaningless if we don't need a new string code
               (because there's already one in the hash table for the
               current string)
            */

        lookupInHash(lzwP, gifPixel, &found, &code, &hash);

        if (found)
            /* With this new pixel, it is still a known string; 'code' is
               its code
            */
            lzwP->stringSoFar = code;
        else {
            /* We've found the longest prefix of the rest of the image for
               which we have a string code defined.  Output the code for that
               prefix, thus defining a new string code in the protocol for
               possible later use.  The new code is defined as this string
               plus the first pixel of the next string.

               But if there aren't any unused string codes left, outputting
               our string doesn't define any new string code.
            */

            if (lzwP->nextCodeToDefine < lzwP->codeBufferP->maxCodeLimit) {
                lzwP->hashTable[hash].present         = true;
                lzwP->hashTable[hash].baseString      = lzwP->stringSoFar;
                lzwP->hashTable[hash].additionalPixel = gifPixel;
                lzwP->hashTable[hash].combinedString  = lzwP->nextCodeToDefine;
            }

            lzwOutputCurrentString(lzwP);

            /* This singleton pixel starts the next string */
            lzwP->stringSoFar = gifPixel;
        }
    }
}



/*
 * Algorithm:  use open addressing double hashing (no chaining) on the
 * prefix code / next character combination.  We do a variant of Knuth's
 * algorithm D (vol. 3, sec. 6.4) along with G. Knott's relatively-prime
 * secondary probe.  Here, the modular division first probe is gives way
 * to a faster exclusive-or manipulation.  Also do block compression with
 * an adaptive reset, whereby the code table is cleared when the compression
 * ratio decreases, but after the table fills.  The variable-length output
 * codes are re-sized at this point, and a special CLEAR code is generated
 * for the decompressor.  Late addition:  construct the table according to
 * file size for noticeable speed improvement on small files.  Please direct
 * questions about this implementation to ames!jaw.
 */

static void
writePixelUncompressed(LzwCompressor * const lzwP,
                       unsigned int    const gifPixel) {

    lzwP->stringSoFar = gifPixel;
    lzwOutputCurrentString(lzwP);

}



static void
writeGlobalColorMap(FILE *              const ofP,
                    const struct Cmap * const cmapP,
                    unsigned int        const bitsPerPixel) {
/*----------------------------------------------------------------------------
  Write out the Global Color Map

  Note that the Global Color Map is always a power of two colors
  in size, but *cmapP could be smaller than that.  So we pad with
  black.
-----------------------------------------------------------------------------*/
    unsigned int const colorMapSize = 1 << bitsPerPixel;

    struct pam pam;
    unsigned int i;
    tuple tupleRgb255;

    if (verbose)
        pm_message("Writing %u-entry global colormap for %u colors",
                   colorMapSize, cmapP->cmapSize);

    pam = cmapP->pam;
    pam.size = PAM_STRUCT_SIZE(allocation_depth);
    pam.len = pam.size;
    pnm_setminallocationdepth(&pam, 3);

    tupleRgb255 = pnm_allocpamtuple(&pam);

    for (i = 0; i < colorMapSize; ++i) {
        if (i < cmapP->cmapSize) {
            tuple const color = cmapP->color[i];

            assert(i < cmapP->cmapSize);

            pnm_scaletuple(&pam, tupleRgb255, color, 255);
            pnm_maketuplergb(&pam, tupleRgb255);

            fputc(tupleRgb255[PAM_RED_PLANE], ofP);
            fputc(tupleRgb255[PAM_GRN_PLANE], ofP);
            fputc(tupleRgb255[PAM_BLU_PLANE], ofP);
        } else {
            fputc(0, ofP);
            fputc(0, ofP);
            fputc(0, ofP);
        }
    }
    pnm_freepamtuple(tupleRgb255);
}



static void
reportImageInfo(bool         const interlace,
                unsigned int const background,
                unsigned int const bitsPerPixel) {

    if (verbose) {
        if (interlace)
            pm_message("interlaced");
        else
            pm_message("not interlaced");
        pm_message("Background color index = %u", background);
        pm_message("%u bits per pixel", bitsPerPixel);
    }
}



static void
writeGifHeader(FILE *              const ofP,
               unsigned int        const width,
               unsigned int        const height,
               unsigned int        const background,
               unsigned int        const bitsPerPixel,
               const struct Cmap * const cmapP,
               char                const comment[],
               float               const aspect) {

    unsigned int const resolution = bitsPerPixel;

    unsigned char b;

    /* Write the Magic header */
    if (cmapP->haveTransparent || comment || aspect != 1.0 )
        fwrite("GIF89a", 1, 6, ofP);
    else
        fwrite("GIF87a", 1, 6, ofP);

    /* Write out the screen width and height */
    Putword(width,  ofP);
    Putword(height, ofP);

    /* Indicate that there is a global color map */
    b = 0x80;       /* Yes, there is a color map */

    /* OR in the resolution */
    b |= (resolution - 1) << 4;

    /* OR in the Bits per Pixel */
    b |= (bitsPerPixel - 1);

    /* Write it out */
    fputc(b, ofP);

    /* Write out the Background color */
    assert((unsigned char)background == background);
    fputc(background, ofP);

    {
        int const aspectValue = aspect == 1.0 ? 0 : ROUND(aspect * 64) - 15;
        assert(0 <= aspectValue && aspectValue <= 255);
        fputc(aspectValue, ofP);
    }
    writeGlobalColorMap(ofP, cmapP, bitsPerPixel);

    if (cmapP->haveTransparent)
        writeTransparentColorIndexExtension(ofP, cmapP->transparent);

    if (comment)
        writeCommentExtension(ofP, comment);
}



static void
writeImageSeparator(FILE * const ofP) {

    fputc(',', ofP);

}



static void
writeImageHeader(FILE *       const ofP,
                 unsigned int const leftOffset,
                 unsigned int const topOffset,
                 unsigned int const gWidth,
                 unsigned int const gHeight,
                 bool         const gInterlace,
                 unsigned int const initCodeSize) {

    Putword(leftOffset, ofP);
    Putword(topOffset,  ofP);
    Putword(gWidth,     ofP);
    Putword(gHeight,    ofP);

    /* Write out whether or not the image is interlaced */
    if (gInterlace)
        fputc(0x40, ofP);
    else
        fputc(0x00, ofP);

    /* Write out the initial code size */
    fputc(initCodeSize, ofP);
}



static void
writeRaster(struct pam *        const pamP,
            RowReader *         const rowReaderP,
            unsigned int        const alphaPlane,
            unsigned int        const alphaThreshold,
            const struct Cmap * const cmapP,
            unsigned int        const initBits,
            FILE *              const ofP,
            bool                const lzw,
            bool                const noclear) {
/*----------------------------------------------------------------------------
   Write the raster to file 'ofP'.

   Get the raster to write from 'rowReaderP', which gives tuples whose
   format is described by 'pamP'.

   'alphaPlane' is the number of the plane in the tuples supplied by
   'rowReaderP' that we should use for transparency information, and
   'alphaThreshold' is the value in that plane below which we should consider
   the pixel transparent for GIF purposes.

   'alphaPlane' is zero to indicate we should not use any plane as an alpha
   plane (so it's not possible to specify Plane 0 as alpha).

   Use the colormap 'cmapP' to generate the raster ('rowReaderP' gives
   pixel values as RGB samples; the GIF raster is colormap indices).

   Write the raster using LZW compression, or uncompressed depending
   on 'lzw'.

   If 'noclear', don't use any GIF clear codes in the output; i.e. don't
   recompute the string table from current input.  Once the string table gets
   to maximum size, just keep using that table for the rest of the image.
-----------------------------------------------------------------------------*/
    LzwCompressor * lzwP;
    tuple * tuplerow;
    unsigned int nRowsDone;
        /* Number of rows we have read so far from the the input (the
           last of which is the one we're working on now).  Note that
           in case of interlace, this is not the same thing as the row
           number of the current row.
        */

    lzwP = lzw_create(ofP, initBits, lzw, noclear, pamP->height * pamP->width);

    tuplerow = pnm_allocpamrow(pamP);

    lzw_clearBlock(lzwP);

    nRowsDone = 0;

    while (nRowsDone < pamP->height) {
        unsigned int col;

        rowReader_read(rowReaderP, tuplerow);

        for (col = 0; col < pamP->width; ++col) {
            unsigned int const colorIndex =
                gifPixel(pamP, tuplerow[col], alphaPlane, alphaThreshold,
                         cmapP);

                /* The value for the pixel in the GIF image.  I.e. the colormap
                   index.
                */
            if (lzw)
                lzw_encodePixel(lzwP, colorIndex);
            else
                writePixelUncompressed(lzwP, colorIndex);
        }
        ++nRowsDone;
    }
    /* Gif is no good with no pixels; fortunately, that's impossible: */
    assert(nRowsDone > 0);

    lzw_flush(lzwP);

    pnm_freepamrow(tuplerow);

    lzw_destroy(lzwP);
}



static void
writeEndOfImage(FILE * const ofP) {

    /* An empty block marks the end of a series of blocks */

    fputc(0, ofP);
}



static void
writeGifImage(FILE *              const ofP,
              unsigned int        const leftOffset,
              unsigned int        const topOffset,
              struct pam *        const pamP,
              pm_filepos          const rasterPos,
              bool                const gInterlace,
              unsigned int        const bitsPerPixel,
              bool                const lzw,
              bool                const noclear,
              bool                const usingAlpha,
              const struct Cmap * const cmapP) {

    unsigned int const initCodeSize = bitsPerPixel <= 1 ? 2 : bitsPerPixel;
        /* The initial code size */

    sample const alphaThreshold = (pamP->maxval + 1) / 2;
        /* Levels below this in the alpha plane indicate transparent
           pixels in the output image.
        */

    unsigned int const alphaPlane = usingAlpha ? pamAlphaPlane(pamP) : 0;

    RowReader * rowReaderP;

    writeImageSeparator(ofP);

    writeImageHeader(ofP, leftOffset, topOffset, pamP->width, pamP->height,
                     gInterlace, initCodeSize);

    rowReaderP = rowReader_create(pamP, rasterPos, gInterlace);

    writeRaster(pamP, rowReaderP, alphaPlane, alphaThreshold,
                cmapP, initCodeSize + 1, ofP, lzw, noclear);

    rowReader_destroy(rowReaderP);

    writeEndOfImage(ofP);
}



static void
writeGifStreamTerminator(FILE * const ofP) {

    fputc(';', ofP);
}



static void
writeGif(struct pam *        const pamP,
         FILE *              const ofP,
         pm_filepos          const rasterPos,
         bool                const gInterlace,
         int                 const background,
         unsigned int        const bitsPerPixel,
         const struct Cmap * const cmapP,
         char                const comment[],
         float               const aspect,
         bool                const lzw,
         bool                const noclear,
         bool                const usingAlpha) {
/*----------------------------------------------------------------------------
   'usingAlpha' means use the alpha (transparency) plane, if there is one, to
   determine which GIF pixels are transparent.  When this is true, the
   colormap *cmapP must contain a transparent entry.
-----------------------------------------------------------------------------*/
    unsigned int const leftOffset = 0;
    unsigned int const topOffset  = 0;

    reportImageInfo(gInterlace, background, bitsPerPixel);

    if (pamP->width > 65535)
        pm_error("Image width %u too large for GIF format.  (Max 65535)",
                 pamP->width);

    if (pamP->height > 65535)
        pm_error("Image height %u too large for GIF format.  (Max 65535)",
                 pamP->height);

    writeGifHeader(ofP, pamP->width, pamP->height, background,
                   bitsPerPixel, cmapP, comment, aspect);

    writeGifImage(ofP, leftOffset, topOffset, pamP, rasterPos,
                  gInterlace, bitsPerPixel, lzw, noclear, usingAlpha,
                  cmapP);

    writeGifStreamTerminator(ofP);
}



static void
reportTransparent(enum TransparencyType const transType,
                  const struct Cmap *   const cmapP) {

    if (verbose) {
        switch (transType) {
        case TRANS_NONE:
            pm_message("Not making transparent pixels");
            break;
        case TRANS_COLOR:
            pm_message("Making pixels of a certain color transparent");
            break;
        case TRANS_ALPHA:
            pm_message("Making pixels transparent per input alpha mask");
            break;
        }

        if (cmapP->haveTransparent) {
            tuple const color = cmapP->color[cmapP->transparent];
            pm_message("Color %u (%lu, %lu, %lu) is transparent",
                       cmapP->transparent,
                       color[PAM_RED_PLANE],
                       color[PAM_GRN_PLANE],
                       color[PAM_BLU_PLANE]);
        } else
            pm_message("No transparent color");
    }
}



static void
computeTransparent(enum TransparencyType const transType,
                   char                  const colorarg[],
                   unsigned int          const fakeTransparent,
                   struct Cmap *         const cmapP) {
/*----------------------------------------------------------------------------
   Figure out the color index (index into the colormap) of the color
   that is to be transparent in the GIF and set it in the colormap.

   'transType' tells what the source of the transparency is.

   If 'transType' says all pixels of a single foreground color are to be
   transparent:

     'colorarg' is the specification of that color.  Its
     maxval is the maxval of the colormap.

     colorarg[] is a standard Netpbm color specification (e.g. "red",
     "#fefefe"), except that may have a "=" prefix, which means it specifies a
     particular exact color, as opposed to without the "=", which means "the
     color that is closest to this and actually in the image."

     Establish no transparent color if colorarg[] specifies an exact
     color and that color is not in the image.  Also issue an
     informational message.

   If 'transType' says an input alpha channel will dtermine what pixels are
   transparent:

     'fakeTransparent' is the special color map index for transparent pixels.
-----------------------------------------------------------------------------*/
    switch (transType) {
    case TRANS_COLOR: {
        const char * colorspec;
        bool exact;
        tuple transcolor;
        int found;
        int colorindex;

        assert(colorarg);

        if (colorarg[0] == '=') {
            colorspec = &colorarg[1];
            exact = TRUE;
        } else {
            colorspec = colorarg;
            exact = FALSE;
        }

        transcolor = pnm_parsecolor(colorspec, cmapP->pam.maxval);
        pnm_lookuptuple(&cmapP->pam, cmapP->tuplehash, transcolor, &found,
                        &colorindex);

        if (found) {
            cmapP->haveTransparent = TRUE;
            cmapP->transparent = colorindex;
        } else if (!exact) {
            cmapP->haveTransparent = TRUE;
            cmapP->transparent = closestColor(transcolor, &cmapP->pam, cmapP);
        } else {
            cmapP->haveTransparent = FALSE;
            pm_message("Warning: specified transparent color "
                       "does not occur in image.");
        }
    } break;
    case TRANS_ALPHA: {
        cmapP->haveTransparent = TRUE;
        cmapP->transparent = fakeTransparent;
    } break;
    case TRANS_NONE: {
        cmapP->haveTransparent = FALSE;
    } break;
    }  /* switch */
    reportTransparent(transType, cmapP);
}



static unsigned int
sortOrderColor(tuple const tuple) {

    return ((tuple[PAM_RED_PLANE] * MAXCMAPSIZE) +
            tuple[PAM_GRN_PLANE]) * MAXCMAPSIZE +
           tuple[PAM_BLU_PLANE];
}



#ifndef LITERAL_FN_DEF_MATCH
static qsort_comparison_fn sortCompareColor;
#endif

static int
sortCompareColor(const void * const entry1P,
                 const void * const entry2P) {

    struct tupleint * const * const tupleint1PP = entry1P;
    struct tupleint * const * const tupleint2PP = entry2P;

    return (sortOrderColor((*tupleint1PP)->tuple)
            - sortOrderColor((*tupleint2PP)->tuple));
}



#ifndef LITERAL_FN_DEF_MATCH
static qsort_comparison_fn sortCompareGray;
#endif

static int
sortCompareGray(const void * const entry1P,
                const void * const entry2P){

    struct tupleint * const * const tupleint1PP = entry1P;
    struct tupleint * const * const tupleint2PP = entry2P;

    return ((*tupleint1PP)->tuple[0] - (*tupleint2PP)->tuple[0]);
}



static void
sortTupletable(struct pam * const mapPamP,
               unsigned int const colors,
               tupletable   const tuplefreq) {
/*----------------------------------------------------------------------------
   Sort the colormap *cmapP.

   Sort the colormap by red intensity, then by green intensity,
   then by blue intensity.
-----------------------------------------------------------------------------*/

    pm_message("sorting colormap");

    if (mapPamP->depth < 3)
        qsort(tuplefreq, colors, sizeof(tuplefreq[0]), sortCompareGray);
    else
        qsort(tuplefreq, colors, sizeof(tuplefreq[0]), sortCompareColor);

}



static void
addToColormap(struct Cmap *  const cmapP,
              const char *   const colorspec,
              unsigned int * const newIndexP) {
/*----------------------------------------------------------------------------
  Add a new entry to the colormap.  Make the color that specified by
  'colorspec', and return the index of the new entry as *newIndexP.

  'colorspec' is a color specification given by the user, e.g.
  "red" or "rgb:ff/03/0d".  The maxval for this color specification is
  that for the colormap *cmapP.
-----------------------------------------------------------------------------*/
    tuple const transcolor = pnm_parsecolor(colorspec, cmapP->pam.maxval);

    unsigned int const colorIndex = cmapP->cmapSize++;

    cmapP->color[colorIndex] = pnm_allocpamtuple(&cmapP->pam);

    if (cmapP->pam.depth < 3) {
        if (!pnm_rgbtupleisgray(transcolor))
            pm_error("Image is grayscale, but color '%s' is not gray.  "
                     "It is (%lu, %lu, %lu)",
                     colorspec,
                     transcolor[PAM_RED_PLANE],
                     transcolor[PAM_GRN_PLANE],
                     transcolor[PAM_BLU_PLANE]);
        else
            cmapP->color[colorIndex][0] = transcolor[0];
    } else {
        pnm_assigntuple(&cmapP->pam, cmapP->color[colorIndex], transcolor);
    }
    *newIndexP = colorIndex;
}



static void
colormapFromFile(char               const filespec[],
                 unsigned int       const maxcolors,
                 tupletable *       const tupletableP,
                 struct pam *       const mapPamP,
                 unsigned int *     const colorCountP) {
/*----------------------------------------------------------------------------
   Read a colormap from the Netpbm file filespec[].  Return a
   tupletable of the colors in it (which is practically a colormap) as
   *tupletableP and the format of those tuples as *mapPamP.  Return
   the number of colors as *colorsCountP.
-----------------------------------------------------------------------------*/
    FILE * mapfileP;
    tuple ** colors;
    unsigned int colorCount;

    mapfileP = pm_openr(filespec);
    colors = pnm_readpam(mapfileP, mapPamP, PAM_STRUCT_SIZE(tuple_type));
    pm_close(mapfileP);

    pm_message("computing other colormap ...");

    *tupletableP =
        pnm_computetuplefreqtable(mapPamP, colors, maxcolors, &colorCount);

    *colorCountP = colorCount;

    pnm_freepamarray(colors, mapPamP);
}



static void
readAndValidateColormapFromFile(char           const filename[],
                                unsigned int   const maxcolors,
                                tupletable *   const tuplefreqP,
                                struct pam *   const mapPamP,
                                unsigned int * const colorCountP,
                                unsigned int   const nInputComp,
                                sample         const inputMaxval) {
/*----------------------------------------------------------------------------
   Read the colormap from a separate colormap file named filename[],
   and make sure it's consistent with an image with 'nInputComp'
   color components (e.g. 3 for RGB) and a maxval of 'inputMaxval'.
-----------------------------------------------------------------------------*/
    colormapFromFile(filename, maxcolors, tuplefreqP, mapPamP, colorCountP);

    if (mapPamP->depth != nInputComp)
        pm_error("Depth of map file (%u) does not match number of "
                 "color components in input file (%u)",
                 mapPamP->depth, nInputComp);
    if (mapPamP->maxval != inputMaxval)
        pm_error("Maxval of map file (%lu) does not match maxval of "
                 "input file (%lu)", mapPamP->maxval, inputMaxval);
}



static void
computeColormapBw(struct pam *   const pamP,
                  struct pam *   const mapPamP,
                  unsigned int * const colorCountP,
                  tupletable   * const tuplefreqP) {
/*----------------------------------------------------------------------------
  Shortcut for black and white (e.g. PBM).  We know that there are
  only two colors.  Users who know that only one color is present in
  the image should specify -sort at the command line.  Example:

   $ pbmmake -w 600 400 | pamtogif -sort > canvas.gif
-----------------------------------------------------------------------------*/
    tupletable const colormap = pnm_alloctupletable(pamP, 2);

    *mapPamP = *pamP;
    mapPamP->depth = 1;

    colormap[0]->value = 1;
    colormap[0]->tuple[0] = PAM_BLACK;
    colormap[1]->value = 1;
    colormap[1]->tuple[0] = PAM_BW_WHITE;

    *tuplefreqP  = colormap;
    *colorCountP = 2;
}



static void
computeColormapFromInput(struct pam *   const pamP,
                         unsigned int   const maxcolors,
                         unsigned int   const nInputComp,
                         struct pam *   const mapPamP,
                         unsigned int * const colorCountP,
                         tupletable *   const tuplefreqP) {

    tupletable tuplefreq;

    pm_message("computing colormap...");

    tuplefreq = pnm_computetuplefreqtable3(
        pamP, NULL, maxcolors, nInputComp, pamP->maxval, colorCountP);

    *mapPamP = *pamP;
    mapPamP->depth = nInputComp;

    *tuplefreqP = tuplefreq;
}



static void
computeLibnetpbmColormap(struct pam *          const pamP,
                         enum TransparencyType const transType,
                         const char *          const mapfile,
                         tuple *               const color,
                         tuplehash *           const tuplehashP,
                         struct pam *          const mapPamP,
                         unsigned int *        const colorCountP,
                         bool                  const sort) {
/*----------------------------------------------------------------------------
   Compute a colormap, libnetpbm style, for the image described by
   'pamP', which is positioned to the raster.

   If 'mapfile' is non-null, Use the colors in that (Netpbm) file for
   the color map instead of the colors in 'pamP'.

   Return the colormap as color[] and *tuplehashP.  Return the format
   of those tuples as *mapPamP.

   The tuples of the color map have a meaningful depth of 1 (grayscale) or 3
   (color) and *mapPamP reflects that.

   While we're at it, count the colors and validate that there aren't too
   many.  Return the count as *colorCountP.  In determining if there are too
   many, allow one slot for a fake transparency color if 'transType' is
   'TRANS_ALPHA'.  If there are too many, issue an error message and abort the
   program.

   'sort' means to sort the colormap by red intensity, then by green
   intensity, then by blue intensity, as opposed to arbitrary order.
-----------------------------------------------------------------------------*/
    unsigned int const maxcolors =
        transType == TRANS_ALPHA ? MAXCMAPSIZE - 1 : MAXCMAPSIZE;
        /* The most colors we can tolerate in the image.  If we have
           our own made-up entry in the colormap for transparency, it
           isn't included in this count.
        */
    unsigned int const nInputComp =
        pamAlphaPlane(pamP) ? pamP->depth - 1 : pamP->depth;
        /* Number of color components (not alpha) in the input image */

    unsigned int i;
    tupletable tuplefreq;
    unsigned int colorCount;

    if (mapfile)
        readAndValidateColormapFromFile(mapfile, maxcolors, &tuplefreq,
                                        mapPamP, &colorCount,
                                        nInputComp, pamP->maxval);
    else if (nInputComp == 1 && pamP->maxval == 1 && !sort &&
             pamP->height * pamP->width > 1)
        computeColormapBw(pamP, mapPamP, &colorCount, &tuplefreq);
    else
        computeColormapFromInput(pamP, maxcolors, nInputComp,
                                 mapPamP, &colorCount, &tuplefreq);

    if (tuplefreq == NULL)
        pm_error("too many colors - try doing a 'pnmquant %u'", maxcolors);

    pm_message("%u colors found", colorCount);

    if (sort)
        sortTupletable(mapPamP, colorCount, tuplefreq);

    for (i = 0; i < colorCount; ++i) {
        color[i] = pnm_allocpamtuple(mapPamP);
        pnm_assigntuple(mapPamP, color[i], tuplefreq[i]->tuple);
    }

    /* And make a hash table for fast lookup. */
    *tuplehashP =
        pnm_computetupletablehash(mapPamP, tuplefreq, colorCount);

    *colorCountP = colorCount;

    pnm_freetupletable(mapPamP, tuplefreq);
}



static void
destroyCmap(struct Cmap * const cmapP) {

    unsigned int colorIndex;

    for (colorIndex = 0; colorIndex < cmapP->cmapSize; ++colorIndex)
        pnm_freepamtuple(cmapP->color[colorIndex]);

    pnm_destroytuplehash(cmapP->tuplehash);
}



int
main(int argc, const char ** argv) {

    struct CmdlineInfo cmdline;
    FILE * ifP;
    struct pam pam;
    unsigned int bitsPerPixel;
    pm_filepos rasterPos;
    struct Cmap cmap;
        /* The colormap, with all its accessories */
    enum TransparencyType transType;
    unsigned int fakeTransparent;
        /* colormap index of the fake transparency color we're using to
           implement the alpha mask.  Defined only if 'transType' is
           TRANS_ALPHA.
        */

    pm_proginit(&argc, argv);

    parseCommandLine(argc, argv, &cmdline);

    verbose = cmdline.verbose;

    ifP = pm_openr_seekable(cmdline.input_filespec);

    pnm_readpaminit(ifP, &pam, PAM_STRUCT_SIZE(tuple_type));

    pm_tell2(ifP, &rasterPos, sizeof(rasterPos));

    transType = cmdline.transparent ? TRANS_COLOR :
        pamAlphaPlane(&pam) ? TRANS_ALPHA :
        TRANS_NONE;

    computeLibnetpbmColormap(&pam, transType, cmdline.mapfile,
                             cmap.color, &cmap.tuplehash,
                             &cmap.pam, &cmap.cmapSize, cmdline.sort);

    assert(cmap.pam.maxval == pam.maxval);

    if (transType == TRANS_ALPHA) {
        /* Add a fake entry to the end of the colormap for transparency.
           Make its color black.
        */
        addToColormap(&cmap, cmdline.alphacolor, &fakeTransparent);
    }

    bitsPerPixel = cmap.cmapSize == 1 ? 1 : nSignificantBits(cmap.cmapSize-1);

    computeTransparent(transType, cmdline.transparent, fakeTransparent, &cmap);

    writeGif(&pam, stdout, rasterPos,
             cmdline.interlace, 0, bitsPerPixel, &cmap, cmdline.comment,
             cmdline.aspect, !cmdline.nolzw, cmdline.noclear,
             transType==TRANS_ALPHA);

    destroyCmap(&cmap);

    pm_close(ifP);
    pm_close(stdout);

    return 0;
}



/*============================================================================
  Original version, named 'ppmgif' was by Jef Poskanzer in 1989, based
  on GIFENCOD by David Rowley <mgardi@watdscu.waterloo.edu>.A Lempel-Zim
  compression based on "compress".

  Switched to use libnetpbm PAM facilities (ergo process PAM images)
  and renamed 'pamtogif' by Bryan Henderson November 2006.

  The non-LZW GIF generation stuff was adapted from the Independent
  JPEG Group's djpeg on 2001.09.29.  In 2006.12 the output subroutines
  were rewritten; now no uncompressed output subroutines are derived from
  the Independent JPEG Group's source code.

  2007.01  Changed sort routine to qsort.  (afu)
  2007.03  Implemented variable hash table size, PBM color table
           shortcut and "-aspect" command line option.   (afu)


  Copyright (C) 1989 by Jef Poskanzer.

  Permission to use, copy, modify, and distribute this software and its
  documentation for any purpose and without fee is hereby granted, provided
  that the above copyright notice appear in all copies and that both that
  copyright notice and this permission notice appear in supporting
  documentation.  This software is provided "as is" without express or
  implied warranty.

  The Graphics Interchange Format(c) is the Copyright property of
  CompuServe Incorporated.  GIF(sm) is a Service Mark property of
  CompuServe Incorporated.
============================================================================*/