diff options
Diffstat (limited to 'test')
55 files changed, 433 insertions, 443 deletions
diff --git a/test/gif-roundtrip.test b/test/gif-roundtrip.test index a30be1aa..13ff595e 100755 --- a/test/gif-roundtrip.test +++ b/test/gif-roundtrip.test @@ -10,40 +10,40 @@ tmpdir=${tmpdir:-/tmp} echo "Test 1. Should print 1926073387 101484" -rose_ppm=${tmpdir}/rose.ppm +test_ppm=${tmpdir}/testimg.ppm -cp testimg.ppm ${rose_ppm} && -ppmtorgb3 ${rose_ppm} +cp testimg.ppm ${tmpdir} && +ppmtorgb3 ${test_ppm} -rose_red=${tmpdir}/rose.red -rose_grn=${tmpdir}/rose.grn -rose_blu=${tmpdir}/rose.blu +test_red=${tmpdir}/testimg.red +test_grn=${tmpdir}/testimg.grn +test_blu=${tmpdir}/testimg.blu out_red=${tmpdir}/out.red out_grn=${tmpdir}/out.grn #out_blu=${tmpdir}/out.blu -pamtogif ${rose_red} | giftopnm > ${out_red} && -pamtogif ${rose_grn} | giftopnm > ${out_grn} && -pamtogif ${rose_blu} | giftopnm | \ +pamtogif ${test_red} | giftopnm > ${out_red} && +pamtogif ${test_grn} | giftopnm > ${out_grn} && +pamtogif ${test_blu} | giftopnm | \ rgb3toppm ${out_red} ${out_grn} - | \ cksum -rm ${rose_ppm} ${rose_grn} ${rose_blu} ${out_red} ${out_grn} +rm ${test_ppm} ${test_grn} ${test_blu} ${out_red} ${out_grn} echo "Test 2. Should produce 1571496937 33838 six times" -rose_gif=${tmpdir}/rose.gif +test_gif=${tmpdir}/testimg.gif -cat ${rose_red} | cksum -pamtogif ${rose_red} | giftopnm | cksum -pamtogif -interlace ${rose_red} | giftopnm | cksum -pamtogif -noclear ${rose_red} | giftopnm | cksum -pamtogif -sort ${rose_red} | tee ${rose_gif} | \ +cat ${test_red} | cksum +pamtogif ${test_red} | giftopnm | cksum +pamtogif -interlace ${test_red} | giftopnm | cksum +pamtogif -noclear ${test_red} | giftopnm | cksum +pamtogif -sort ${test_red} | tee ${test_gif} | \ giftopnm | cksum -echo "junk" >> ${rose_gif} && \ - giftopnm -image=1 -quitearly ${rose_gif} | cksum +echo "junk" >> ${test_gif} && \ + giftopnm -image=1 -quitearly ${test_gif} | cksum -rm ${rose_gif} ${rose_red} +rm ${test_gif} ${test_red} echo "Test 3. Should produce 281226646 481 six times" # maze.pbm is too small for -noclear to take effect @@ -78,7 +78,7 @@ echo "" echo "Test 5. Should produce: N : 0 0 0 0 : 0 , N : 0 0 0 0 : 0" echo "(N=238, 239, 240, 241, 255, 256, 257, 4030, 4031, 4097)" -rose_pgm=${tmpdir}/rose.pgm +test_pgm=${tmpdir}/testimg.pgm # The following awk scripts produce a PGM file with no repeated # sequences. Obviously this cannot be compressed at all; the codes @@ -114,14 +114,14 @@ awk -v maxval=${maxval} 'BEGIN \ for size in 238 239 240 241 255 256 257 do - pamcut -height=${size} ${test257_pgm} > ${rose_pgm} && - pamtogif -verbose ${rose_pgm} | giftopnm | pamdepth ${maxval} | \ - cmp - ${rose_pgm} - echo -n ${size} ":" ${PIPESTATUS[@]} ":" $? ", " - pamtogif -nolzw -verbose ${rose_pgm} | giftopnm | pamdepth ${maxval} | \ - cmp - ${rose_pgm} - echo ${size} ":" ${PIPESTATUS[@]} ":" $? - rm ${rose_pgm} + pamcut -height=${size} ${test257_pgm} > ${test_pgm} && + pamtogif -verbose ${test_pgm} | giftopnm | pamdepth ${maxval} | \ + cmp - ${test_pgm} + printf "${size} : ${PIPESTATUS[*]} : $? , " + pamtogif -nolzw -verbose ${test_pgm} | giftopnm | pamdepth ${maxval} | \ + cmp - ${test_pgm} + printf "${size} : ${PIPESTATUS[*]} : $?\n" + rm ${test_pgm} done rm ${test257_pgm} @@ -144,16 +144,16 @@ awk -v maxval=${maxval} 'BEGIN \ for size in 4030 4031 4097 do - pamcut -height ${size} ${test4097_pgm} > ${rose_pgm} && - pamtogif -verbose ${rose_pgm} | giftopnm | pamdepth ${maxval} | \ - cmp - ${rose_pgm} + pamcut -height ${size} ${test4097_pgm} > ${test_pgm} && + pamtogif -verbose ${test_pgm} | giftopnm | pamdepth ${maxval} | \ + cmp - ${test_pgm} # pamdepth ${maxval} is necessary because # giftopnm output is maxval 255 - echo -n ${size} ":" ${PIPESTATUS[@]} ":" $? ", " - pamtogif -nolzw ${rose_pgm} | giftopnm | pamdepth ${maxval} | \ - cmp - ${rose_pgm} - echo ${size} ":" ${PIPESTATUS[@]} ":" $? - rm ${rose_pgm} + printf "${size} : ${PIPESTATUS[*]} : $? , " + pamtogif -nolzw ${test_pgm} | giftopnm | pamdepth ${maxval} | \ + cmp - ${test_pgm} + printf "${size} : ${PIPESTATUS[*]} : $?\n" + rm ${test_pgm} done rm ${test4097_pgm} diff --git a/test/gif-transparent1.test b/test/gif-transparent1.test index c2da5468..74496787 100755 --- a/test/gif-transparent1.test +++ b/test/gif-transparent1.test @@ -52,7 +52,7 @@ i=1 for test_pnm in ${argyle_ppm} ${gingham_ppm} ${madras_ppm} \ ${alpha0_pbm} ${alpha1_pbm} do - echo -n "Image $i: "; i=$((i+1)); + printf "Image $i: "; i=$((i+1)); pamtogif ${test_pnm} | giftopnm | tee ${out_pnm} | \ cmp -s - ${test_pnm}; result=$? diff --git a/test/pamarith.test b/test/pamarith.test index 9c95db80..4b37f1e4 100755 --- a/test/pamarith.test +++ b/test/pamarith.test @@ -127,80 +127,80 @@ test_out=${tmpdir}/test_out # multiple functions pamarith -add -subtract testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -multiply -divide testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -difference -minimum testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -maximum -mean testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -compare -and testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -compare -equal testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -or -nand testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -nor -xor testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -shiftleft -shiftright testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} # -add does not take a value pamarith -add=1 testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} # No function pamarith -plain testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} # Just one input image file pamarith -add testimg.ppm > ${test_out} || \ - echo -n "Expected failure 13" + printf "Expected failure 13" test -s ${test_out}; echo " "$? rm -f ${test_out} # No input image file pamarith -add > ${test_out} || \ - echo -n "Expected failure 14" + printf "Expected failure 14" test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -208,48 +208,48 @@ pamarith -add > ${test_out} || \ pamchannel -infile testimg.ppm 0 1 | \ pamarith -add testimg.ppm - > ${test_out} || \ - echo -n "Expected failure 15" + printf "Expected failure 15" test -s ${test_out}; echo " "$? rm -f ${test_out} # Input images with different x/y dimensions pamarith -add testimg.ppm testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 16" + printf "Expected failure 16" test -s ${test_out}; echo " "$? rm -f ${test_out} pamenlarge -xscale=2 testgrid.pbm | \ pamarith -add testgrid.pbm - > ${test_out} || \ - echo -n "Expected failure 17" + printf "Expected failure 17" test -s ${test_out}; echo " "$? rm -f ${test_out} pamenlarge -yscale=3 testgrid.pbm | \ pamarith -add testgrid.pbm - > ${test_out} || \ - echo -n "Expected failure 18" + printf "Expected failure 18" test -s ${test_out}; echo " "$? rm -f ${test_out} # Invalid usage of -closeness pamarith -equal -closeness=100.1 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 19" + printf "Expected failure 19" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -equal -closeness=-10 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 20" + printf "Expected failure 20" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -closeness -equal testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 21" + printf "Expected failure 21" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -compare -closeness=10 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 22" + printf "Expected failure 22" test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -267,64 +267,64 @@ pgmmake -maxval=8191 1.0 3 1 > ${input5_pgm} # Bit string functions - Maxval must match pamarith -and ${input3_pgm} ${input5_pgm} > ${test_out} || \ - echo -n "Expected failure 23" + printf "Expected failure 23" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -or ${input3_pgm} ${input5_pgm} > ${test_out} || \ - echo -n "Expected failure 24" + printf "Expected failure 24" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -nand ${input3_pgm} ${input5_pgm} > ${test_out} || \ - echo -n "Expected failure 25" + printf "Expected failure 25" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -nor ${input3_pgm} ${input5_pgm} > ${test_out} || \ - echo -n "Expected failure 26" + printf "Expected failure 26" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -xor ${input3_pgm} ${input5_pgm} > ${test_out} || \ - echo -n "Expected failure 27" + printf "Expected failure 27" test -s ${test_out}; echo " "$? rm -f ${test_out} # Bit string functions - Maxval must be 2^n -1 pamarith -and ${input4_pgm} ${input4_pgm} > ${test_out} || \ - echo -n "Expected failure 28" + printf "Expected failure 28" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -or ${input4_pgm} ${input4_pgm} > ${test_out} || \ - echo -n "Expected failure 29" + printf "Expected failure 29" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -nand ${input4_pgm} ${input4_pgm} > ${test_out} || \ - echo -n "Expected failure 30" + printf "Expected failure 30" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -nor ${input4_pgm} ${input4_pgm} > ${test_out} || \ - echo -n "Expected failure 31" + printf "Expected failure 31" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -xor ${input4_pgm} ${input4_pgm} > ${test_out} || \ - echo -n "Expected failure 32" + printf "Expected failure 32" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -shiftleft ${input4_pgm} ${input4_pgm} > ${test_out} || \ - echo -n "Expected failure 33" + printf "Expected failure 33" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -shiftright ${input4_pgm} ${input4_pgm} > ${test_out} || \ - echo -n "Expected failure 34" + printf "Expected failure 34" test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -335,32 +335,32 @@ rm ${input3_pgm} ${input4_pgm} ${input5_pgm} # three or more inputs. pamarith -subtract testimg.ppm testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 35" + printf "Expected failure 35" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -divide testimg.ppm testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 36" + printf "Expected failure 36" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -compare testimg.ppm testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 37" + printf "Expected failure 37" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -difference testimg.ppm testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 38" + printf "Expected failure 38" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -shiftleft testimg.ppm testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 39" + printf "Expected failure 39" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -shiftright testimg.ppm testimg.ppm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 40" + printf "Expected failure 40" test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -368,11 +368,11 @@ pamarith -shiftright testimg.ppm testimg.ppm testimg.ppm > ${test_out} || \ # These two cases should be removed once improvements are made. pamarith -equal testgrid.pbm testgrid.pbm testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 41" + printf "Expected failure 41" test -s ${test_out}; echo " "$? rm -f ${test_out} pamarith -mean testgrid.pbm testgrid.pbm testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 42" + printf "Expected failure 42" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamchannel.test b/test/pamchannel.test index f72725ee..f2662706 100755 --- a/test/pamchannel.test +++ b/test/pamchannel.test @@ -42,17 +42,17 @@ test_out=${tmpdir}/test_out echo "Test Invalid" pamchannel -infile testgrid.pbm 1 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamchannel -infile testimg.ppm 3 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamtopam testimg.ppm | pamchannel -infile=- 4 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamcrater.test b/test/pamcrater.test index 61414480..e0c98afb 100755 --- a/test/pamcrater.test +++ b/test/pamcrater.test @@ -64,21 +64,21 @@ echo "Error messages should appear below the line." 1>&2 echo "------------------------------" 1>&2 pamcrater -width 0 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcrater -height 0 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcrater -number 0 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcrater -test -radius=10 | pamshadedrelief -gamma 0 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamcut.test b/test/pamcut.test index 2299b4bc..a489635a 100755 --- a/test/pamcut.test +++ b/test/pamcut.test @@ -56,79 +56,79 @@ echo "-----------------------------------------------------------" 1>&2 # overspecification pamcut -left=1 -right=1 -width=14 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -top=1 -bottom=1 -height=16 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -right=1 -cropright=1 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -top=1 -croptop=1 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -bottom=1 -cropbottom=1 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -left=1 -cropleft=1 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} # excessive cropping pamcut -cropleft=7 -cropright=8 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -left=7 -right=6 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -croptop=8 -cropbottom=8 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -top=10 -bottom=9 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} # pad absent pamcut -cropleft=1 -width=14 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut -croptop=1 -height=16 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} # legacy style: insufficient number of positional parameters pamcut 5 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut 5 4 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 13" + printf "Expected failure 13" test -s ${test_out}; echo " "$? rm -f ${test_out} pamcut 5 5 30 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 14" + printf "Expected failure 14" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamdepth.test b/test/pamdepth.test index 86f6c952..7ff73f41 100755 --- a/test/pamdepth.test +++ b/test/pamdepth.test @@ -30,11 +30,11 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pamdepth 0 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamdepth 65536 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamditherbw.test b/test/pamditherbw.test index 3f37f117..be560089 100755 --- a/test/pamditherbw.test +++ b/test/pamditherbw.test @@ -47,62 +47,62 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pamditherbw -fs -atkinson ${test_red} > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -floyd -atkinson ${test_red} > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -dither8 -cluster3 ${test_red} > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -cluster3 -cluster4 ${test_red} > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -cluster3 -cluster8 ${test_red} > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -cluster4 -cluster8 ${test_red} > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -hilbert -threshold ${test_red} > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -clump=8 ${test_red} > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -fs -clump=8 ${test_red} > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -hilbert -clump=1 ${test_red} > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -th -value=-1 ${test_red} > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} pamditherbw -th -value=1.1 ${test_red} > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamenlarge-pbm.test b/test/pamenlarge-pbm.test index fbb2eced..bea740c6 100755 --- a/test/pamenlarge-pbm.test +++ b/test/pamenlarge-pbm.test @@ -18,7 +18,8 @@ LC_ALL=C awk 'BEGIN { print "P4"; # header # Test 1. echo "test 1" -for xs in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 # for xs in `seq 23` +for xs in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 + # for xs in `seq 23` do pamenlarge -xscale=${xs} ${complete256_pbm} | cksum done @@ -26,7 +27,8 @@ for xs in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 # for xs i # Test 2. echo "test 2" -for xs1 in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 # for xs in `seq 15` +for xs1 in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 + # for xs1 in `seq 15` do xs2=$((30-${xs1})) pamenlarge -xscale=${xs1} ${complete256_pbm} | \ @@ -52,7 +54,7 @@ for width in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 # for width in `seq 16` done for xscale in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 # for xscale in `seq 16` - do echo -n ${xscale} " " + do printf "%d " ${xscale} for width in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 # for width in `seq 16` do pamenlarge -xscale=${xscale} ${test3_pbm}.${width} ; done | cksum # diff --git a/test/pamfile.test b/test/pamfile.test index a0a5c65b..260d0b27 100755 --- a/test/pamfile.test +++ b/test/pamfile.test @@ -31,16 +31,16 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pamfile -size -machine testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfile -count -machine testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} head -n1 testimg.ppm | pamfile > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamfind.test b/test/pamfind.test index 87ef5f9f..9165fbdf 100755 --- a/test/pamfind.test +++ b/test/pamfind.test @@ -44,21 +44,21 @@ echo "-----------------------------------------------------------" 1>&2 echo "Test Invalid" pamfind -color=black -target=1,1,1 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfind -target=0,0 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfind -target=0,0,0,0 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfind testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamfix.test b/test/pamfix.test index 89d3beb6..a18cae10 100755 --- a/test/pamfix.test +++ b/test/pamfix.test @@ -54,16 +54,16 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 printf "P2\n3 2\n7\n0 1 2\n6 7 8\n" | pamfix -change -clip > ${test_out} || \ - echo -n "Expected failure 1"; + printf "Expected failure 1"; test -s ${test_out}; echo " "$? rm -f ${test_out} printf "P1\n5 5\n" | pamfix -truncate -plain > ${test_out} || \ - echo -n "Expected failure 2"; + printf "Expected failure 2"; test -s ${test_out}; echo " "$? rm -f ${test_out} printf "P2\n3 3\255\n" | pamfix -truncate -plain > ${test_out} || \ - echo -n "Expected failure 3"; + printf "Expected failure 3"; test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamfunc.test b/test/pamfunc.test index 0d1a4f3c..fe142be7 100755 --- a/test/pamfunc.test +++ b/test/pamfunc.test @@ -93,121 +93,121 @@ echo "Test Invalid" test_out=${tmpdir}/test_out pamfunc -multiplier testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -multiplier=-1 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -divisor testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -divisor=-20 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -adder testimg.ppm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -adder 0.5 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -subtractor testimg.ppm > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -subtractor 0.1 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -multiplier=1 -divisor=2 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -adder=2 -subtractor=3 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -min testimg.ppm > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -max testimg.ppm > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -andmask testimg.ppm > ${test_out} || \ - echo -n "Expected failure 13" + printf "Expected failure 13" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -ormask testimg.ppm > ${test_out} || \ - echo -n "Expected failure 14" + printf "Expected failure 14" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -xormask testimg.ppm > ${test_out} || \ - echo -n "Expected failure 15" + printf "Expected failure 15" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -not 1 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 16" + printf "Expected failure 16" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -min=1 -max=2 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 17" + printf "Expected failure 17" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -andmask=1 -ormask=0 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 18" + printf "Expected failure 18" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -andmask=0xffff testimg.ppm > ${test_out} || \ - echo -n "Expected failure 19" + printf "Expected failure 19" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -shiftleft testimg.ppm > ${test_out} || \ - echo -n "Expected failure 20" + printf "Expected failure 20" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -shiftright testimg.ppm > ${test_out} || \ - echo -n "Expected failure 21" + printf "Expected failure 21" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -changemaxval testimg.ppm > ${test_out} || \ - echo -n "Expected failure 22" + printf "Expected failure 22" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -shiftleft=1 -shiftright=1 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 23" + printf "Expected failure 23" test -s ${test_out}; echo " "$? rm -f ${test_out} pamfunc -multiplier=0.5 -changemaxval=65535 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 24" + printf "Expected failure 24" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamgauss.test b/test/pamgauss.test index 6c3eff78..9400e928 100755 --- a/test/pamgauss.test +++ b/test/pamgauss.test @@ -28,26 +28,26 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pamgauss 3 3 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamgauss 3 3 -sigma=0 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamgauss 3 3 -sigma=-1.5 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamgauss 3 -sigma=0.5 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamgauss 3 3 3 -sigma=0.5 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamhue.test b/test/pamhue.test index cd5430a8..5979e414 100755 --- a/test/pamhue.test +++ b/test/pamhue.test @@ -16,7 +16,7 @@ pamseq -tupletype=RGB 3 1 | pamdepth 255 | pamhue -huechange=60 | \ echo "Test 3" # pamhue has no effect on monotone images -# Should print 0 0 : 0 twice +# Should print 281226646 481 twice pamhue -huechange=45 maze.pbm | cmp -s - maze.pbm echo ${PIPESTATUS[@]} ":" $? @@ -25,7 +25,7 @@ pamhue -huechange=180 maze.pbm | cmp -s - maze.pbm echo "Test 4" # spinning the color wheel by multiples of 360 leaves the image unchanged -# Should print 0 0 : 0 twice +# Should print 1926073387 101484 twice pamhue -huechange=0 testimg.ppm | cmp -s - testimg.ppm echo ${PIPESTATUS[@]} ":" $? @@ -43,6 +43,6 @@ echo "An error message should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pamhue testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamrecolor.test b/test/pamrecolor.test index 0ba35b66..a5fecc1f 100755 --- a/test/pamrecolor.test +++ b/test/pamrecolor.test @@ -1,6 +1,6 @@ #! /bin/sh # This script tests: pamrecolor -# Also requires: pgmmake +# Also requires: ppmtopgm pgmmake tmpdir=${tmpdir:-/tmp} base_pgm=${tmpdir}/base.pgm @@ -28,34 +28,34 @@ echo "-----------------------------------------------------------" 1>&2 pamrecolor --targetcolor=rgb:00/11/22 \ --colorfile=${base1_pgm} testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrecolor --rmult=0.3 --gmult=0.3 --bmult=0.3 \ --colorfile=${base1_pgm} testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrecolor --colorspace=void \ --targetcolor=rgb:80/80/80 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrecolor --targetcolor=vague testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrecolor --colorfile=${truncated_file} testimg.ppm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrecolor --rmult=0.2989 --gmult=0.5866 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamrestack.test b/test/pamrestack.test index 17e42e30..2ebee49f 100755 --- a/test/pamrestack.test +++ b/test/pamrestack.test @@ -64,28 +64,28 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pamrestack testgrid.pbm maze.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrestack -abort \ -width=$((pixels * 2 + 1 )) maze.pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrestack -crop \ -width=$((pixels * 2 + 1)) maze.pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrestack -width=0 maze.pbm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamrestack -width maze.pbm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamscale-reportonly.test b/test/pamscale-reportonly.test index f65bcb93..924fb7c2 100755 --- a/test/pamscale-reportonly.test +++ b/test/pamscale-reportonly.test @@ -31,36 +31,36 @@ echo "-----------------------------------------------------------" 1>&2 pamscale -reportonly -xsize=640 -ysize=400 -xscale=2 testimg.ppm > \ ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamscale -reportonly -xsize=640 -xscale=2 -yscale=3 testimg.ppm > \ ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamscale -reportonly -xsize=640 -ysize=400 -pixels=200000 testimg.ppm \ > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamscale -reportonly -xsize=640 -ysize=400 -xysize 640 400 testimg.ppm \ > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pamscale -reportonly -xsize=640 -ysize=400 -xyfit 640 400 testimg.ppm \ > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pamscale -reportonly -xsize=640 -ysize=400 -xyfill 640 400 testimg.ppm \ > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamseq.test b/test/pamseq.test index 3fe0fc31..ce3d4995 100755 --- a/test/pamseq.test +++ b/test/pamseq.test @@ -17,17 +17,17 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pamseq 1 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamseq 0 255 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamseq 3 0 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -37,6 +37,6 @@ c256=${c64}${c64}${c64}${c64} # Tupletype string length=256 pamseq -tupletype="${c256}" 3 15 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamshuffle.test b/test/pamshuffle.test index 5582ce3b..2941a9bc 100755 --- a/test/pamshuffle.test +++ b/test/pamshuffle.test @@ -52,16 +52,16 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pamshuffle testimg.ppm testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamshuffle -randomseed -column testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamshuffle -randomseed=null testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamsumm.test b/test/pamsumm.test index fb15c0c4..f482911a 100755 --- a/test/pamsumm.test +++ b/test/pamsumm.test @@ -35,21 +35,21 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pamsumm -sum -min testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pamsumm -sum -max testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pamsumm -mean -max testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pamsumm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pamundice.test b/test/pamundice.test index 14b43dfb..604fe1b8 100755 --- a/test/pamundice.test +++ b/test/pamundice.test @@ -123,63 +123,63 @@ echo "-----------------------------------------------------------" 1>&2 # No input file pattern specified pamundice -down=5 -across=2 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} # -down=0 pamundice -down=0 -across=2 ${fname_stem}_"%1d"_"%1a".pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} # -across=0 pamundice -down=5 -across=0 ${fname_stem}_"%1d"_"%1a".pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} # -down too large pamundice -down=6 -across=2 ${fname_stem}_"%1d"_"%1a".pbm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} # -across too large pamundice -down=5 -across=3 ${fname_stem}_"%1d"_"%1a".pbm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} # precision does not match pamundice -down=5 -across=2 ${fname_stem}_"%2d"_"%2a".pbm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} # precision set to zero pamundice -down=5 -across=2 ${fname_stem}_"%0d"_"%0a".pbm > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} # no precision pamundice -down=5 -across=2 ${fname_stem}_"%d"_"%a".pbm > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} # -hoverlap too large pamundice -down=5 -across=2 -hoverlap=$((${mw}+1)) \ ${fname_stem}_"%1d"_"%1a".pbm > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} # -voverlap too large pamundice -down=5 -across=2 -voverlap=$((${mh}+1)) \ ${fname_stem}_"%1d"_"%1a".pbm > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -188,14 +188,14 @@ for i in 0 1 2 3 4 5 6 7 8 9 do mktemp -u XXXXXXXXXX.${i} || echo ":::::::::::"${i}":::::::::::" done | pamundice -down=5 -across=2 -listfile=- > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} # listfile with insufficient lines (insufficient file entries) ls ${fname_stem}_*_*.pbm | head -n 9 | \ pamundice -down=5 -across=2 -listfile=- > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmclean.test b/test/pbmclean.test index 7c0c4d6d..5eba68e0 100755 --- a/test/pbmclean.test +++ b/test/pbmclean.test @@ -46,7 +46,7 @@ echo "-----------------------------------------------------------" 1>&2 # overspecification pbmclean -black -white -min=1 -extended testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmmake.test b/test/pbmmake.test index c3691b80..1d1c682b 100755 --- a/test/pbmmake.test +++ b/test/pbmmake.test @@ -33,41 +33,41 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pbmmake -b -w -plain 1 1 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake -b -g -plain 1 1 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake -white -gray -plain 1 1 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake -white -plain > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake -white -plain 1 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake -white -plain 1 0 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake -white -plain 0 1 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake -white -plain 1 1 1 > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmnoise-parameters.test b/test/pbmnoise-parameters.test index e467bfd5..17d2c76b 100755 --- a/test/pbmnoise-parameters.test +++ b/test/pbmnoise-parameters.test @@ -13,130 +13,130 @@ test_out=${tmpdir}/test_out # Invalid -ratio arguments pbmnoise -ratio 100 100 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio 0 1 100 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=1.1 100 100 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=-1 100 100 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=half 100 100 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=0/1/1 100 100 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=-1/2 100 100 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=1/0 100 100 > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=/2 100 100 > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=4/2 100 100 > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=6/ 100 100 > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=1.0/2.0 100 100 > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} # denominator must be power of 2 pbmnoise -ratio=3/9 100 100 > ${test_out} || \ - echo -n "Expected failure 13" + printf "Expected failure 13" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=a/2 100 100 > ${test_out} || \ - echo -n "Expected failure 14" + printf "Expected failure 14" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=2/a 100 100 > ${test_out} || \ - echo -n "Expected failure 15" + printf "Expected failure 15" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=1/-2 100 100 > ${test_out} || \ - echo -n "Expected failure 16" + printf "Expected failure 16" test -s ${test_out}; echo " "$? rm -f ${test_out} # Denominator must be 65536 or less pbmnoise -ratio=1/65537 100 100 > ${test_out} || \ - echo -n "Expected failure 17" + printf "Expected failure 17" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -ratio=1/131072 100 100 > ${test_out} || \ - echo -n "Expected failure 17" + printf "Expected failure 17" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -endian=large 100 100 > ${test_out} || \ - echo -n "Expected failure 18" + printf "Expected failure 18" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -randomseed 100 100 > ${test_out} || \ - echo -n "Expected failure 19" + printf "Expected failure 19" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -randomseed=-1 100 100 > ${test_out} || \ - echo -n "Expected failure 20" + printf "Expected failure 20" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise -randomseed=0.1 100 100 > ${test_out} || \ - echo -n "Expected failure 21" + printf "Expected failure 21" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise > ${test_out} || \ - echo -n "Expected failure 22" + printf "Expected failure 22" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise 100 > ${test_out} || \ - echo -n "Expected failure 23" + printf "Expected failure 23" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmnoise 100 200 300 > ${test_out} || \ - echo -n "Expected failure 24" + printf "Expected failure 24" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmpage.test b/test/pbmpage.test index 2805ec97..4f15452d 100755 --- a/test/pbmpage.test +++ b/test/pbmpage.test @@ -20,16 +20,16 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pbmpage -a3 1 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmpage 0 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmpage 4 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmpscale.test b/test/pbmpscale.test index 9c38bb2e..efa5bfb5 100755 --- a/test/pbmpscale.test +++ b/test/pbmpscale.test @@ -36,16 +36,16 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pbmpscale testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmpscale 0 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmpscale 2 3 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmtext-utf8.test b/test/pbmtext-utf8.test index 0677d161..9203607f 100755 --- a/test/pbmtext-utf8.test +++ b/test/pbmtext-utf8.test @@ -135,20 +135,20 @@ echo "Test input text which exceeds length limit" 1>&2 echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 -echo -n "z" >> ${long_txt} +printf "z" >> ${long_txt} cat ${long_txt} | wc -c | tr -d ' ' cat ${long_txt} | \ LC_ALL=${locale_for_test} \ pbmtext -nomargins -builtin fixed -wchar > ${test_out} || \ - echo -n "Expected failure 1"; + printf "Expected failure 1"; test -s ${test_out}; echo " "$? rm -f ${test_out} cat ${long_txt} | \ LC_ALL=${locale_for_test} \ pbmtext -nomargins -builtin fixed -wchar > ${test_out} || \ - echo -n "Expected failure 2"; + printf "Expected failure 2"; test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -169,41 +169,41 @@ echo "Test 6 Invalid" awk 'BEGIN { printf("%c%c",128,129); print ""}' | \ LC_ALL=${locale_for_test} \ pbmtext -builtin bdf -wchar -text-dump > ${test_out} - echo -n "6-1:" ${PIPESTATUS[@]} ":" $? + printf "6-1: ${PIPESTATUS[*]} : $?" test -s ${test_out}; echo " "$? rm -f ${test_out} awk 'BEGIN { printf("ABC%c%c",192, 193); print ""}' | \ LC_ALL=${locale_for_test} \ pbmtext -builtin bdf -wchar -text-dump > ${test_out} - echo -n "6-2:" ${PIPESTATUS[@]} ":" $? + printf "6-2: ${PIPESTATUS[*]} : $?" test -s ${test_out}; echo " "$? rm -f ${test_out} awk 'BEGIN { printf("abcde%c%c", 254, 253); print ""}' | \ LC_ALL=${locale_for_test} \ pbmtext -builtin bdf -wchar -text-dump > ${test_out} - echo -n "6-3:" ${PIPESTATUS[@]} ":" $? + printf "6-3: ${PIPESTATUS[*]} : $?" test -s ${test_out}; echo " "$? rm -f ${test_out} awk 'BEGIN { printf("abcdefg%c%c", 195, 15); print ""}' | \ LC_ALL=${locale_for_test} \ pbmtext -builtin bdf -wchar -text-dump > ${test_out} - echo -n "6-4:" ${PIPESTATUS[@]} ":" $? + printf "6-4: ${PIPESTATUS[*]} : $?" test -s ${test_out}; echo " "$? rm -f ${test_out} awk 'BEGIN { printf("123456789%c%c%c", 224, 143 ,0); print ""}' | \ LC_ALL=${locale_for_test} \ pbmtext -builtin bdf -wchar -text-dump > ${test_out} - echo -n "6-5:" ${PIPESTATUS[@]} ":" $? + printf "6-5: ${PIPESTATUS[*]} : $?" test -s ${test_out}; echo " "$? rm -f ${test_out} awk 'BEGIN { printf("abcdefg123ABCDEFG%c%c%c%c",247, 135, 135, 7); print ""}' | \ LC_ALL=${locale_for_test} \ pbmtext -builtin bdf -wchar -text-dump > ${test_out} - echo -n "6-6:" ${PIPESTATUS[@]} ":" $? + printf "6-6: ${PIPESTATUS[*]} : $?" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmtext.test b/test/pbmtext.test index b82b0771..247f76c5 100755 --- a/test/pbmtext.test +++ b/test/pbmtext.test @@ -10,13 +10,13 @@ echo "Test 1" # Should print 3898818212 967 twice pbmtext UNIX Philosophy: Do one thing and do it well. | cksum -echo -n "UNIX Philosophy: Do one thing and do it well." | pbmtext | cksum +printf "UNIX Philosophy: Do one thing and do it well." | pbmtext | cksum # Should print 2506052117 1354 twice pbmtext -builtin fixed \ For truth is always strange. Stranger than fiction. Lord Byron | cksum -echo -n "For truth is always strange. Stranger than fiction. Lord Byron" | \ +printf "For truth is always strange. Stranger than fiction. Lord Byron" | \ pbmtext -builtin fixed | cksum @@ -112,42 +112,42 @@ echo "Test 6 Invalid" test_out=${tmpdir}/test_out pbmtext -font=testgrid.pbm foo > ${test_out} || \ - echo -n "Expected failure 1"; + printf "Expected failure 1"; test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtext -font=testimg.ppm foo > ${test_out} || \ - echo -n "Expected failure 2"; + printf "Expected failure 2"; test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtext -builtin=void foo > ${test_out} || \ - echo -n "Expected failure 3"; + printf "Expected failure 3"; test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtext -font=${font_pbm} -builtin=fixed foo > ${test_out} || \ - echo -n "Expected failure 4"; + printf "Expected failure 4"; test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtext -dry-run -text-dump foo > ${test_out} || \ - echo -n "Expected failure 5"; + printf "Expected failure 5"; test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtext -dump-sheet -text-dump foo > ${test_out} || \ - echo -n "Expected failure 6"; + printf "Expected failure 6"; test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtext -dry-run -dump-sheet foo > ${test_out} || \ - echo -n "Expected failure 7"; + printf "Expected failure 7"; test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtext -wchar foo > ${test_out} || \ - echo -n "Expected failure 8"; + printf "Expected failure 8"; test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -168,7 +168,7 @@ cat ${long_txt} | pbmtext -nomargins -builtin fixed | cksum echo "Test 8 Invalid" -echo -n "z" >> ${long_txt} +printf "z" >> ${long_txt} awk '{print "text length:", length($0)}' ${long_txt} echo 1>&2 @@ -177,18 +177,18 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pbmtext -nomargins -builtin fixed `cat ${long_txt}` > ${test_out} || \ - echo -n "Expected failure 1"; + printf "Expected failure 1"; test -s ${test_out}; echo " "$? rm -f ${test_out} cat ${long_txt} | pbmtext -nomargins -builtin fixed > ${test_out} || \ - echo -n "Expected failure 2"; + printf "Expected failure 2"; test -s ${test_out}; echo " "$? rm -f ${test_out} cat ${long_txt} | \ LC_ALL=C pbmtext -nomargins -builtin fixed -wchar > ${test_out} || \ - echo -n "Expected failure 3"; + printf "Expected failure 3"; test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmtopgm.test b/test/pbmtopgm.test index 46c04705..02f2bb21 100755 --- a/test/pbmtopgm.test +++ b/test/pbmtopgm.test @@ -18,21 +18,21 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pbmtopgm 5 0 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtopgm 0 9 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtopgm 15 5 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmtopgm 5 17 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pbmupc.test b/test/pbmupc.test index 8d726de5..f8343dd7 100755 --- a/test/pbmupc.test +++ b/test/pbmupc.test @@ -20,46 +20,46 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pbmupc -s3 0 72890 00011 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 72890 00011 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 0 72890 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 10 72890 00011 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 0 172890 00011 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 0 2890 00011 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 0 72890 100011 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 0 72890 0011 > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmupc -s1 0 72890 100011 1 > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pgmhist.test b/test/pgmhist.test index 83f3c52e..c141627d 100755 --- a/test/pgmhist.test +++ b/test/pgmhist.test @@ -35,21 +35,21 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pgmhist -median -quartile testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmhist -median -decile testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmhist -quartile -decile testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmhist testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pgmmake.test b/test/pgmmake.test index 84c03778..3c96d99e 100755 --- a/test/pgmmake.test +++ b/test/pgmmake.test @@ -19,41 +19,41 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pgmmake 100 5 5 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmmake 1.01 5 5 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmmake .5 5 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmmake .5 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmmake -maxval=5 5 5 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmmake -maxval=0 .5 5 5 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmmake -maxval=-1 .5 5 5 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmmake -maxval=65536 .5 5 5 > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pgmnoise-parameters.test b/test/pgmnoise-parameters.test index 2615c8e8..c5e6ada5 100755 --- a/test/pgmnoise-parameters.test +++ b/test/pgmnoise-parameters.test @@ -11,26 +11,26 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pgmnoise -maxval=255 -randomseed=1 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 100 -randomseed=1 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 100 0 -randomseed=1 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 0 100 -randomseed=1 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 100 100 100 -randomseed=1 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pgmnoise.test b/test/pgmnoise.test index 45374793..6141121a 100755 --- a/test/pgmnoise.test +++ b/test/pgmnoise.test @@ -29,7 +29,7 @@ echo "Test 4." for maxval in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 \ 30 31 32 254 255 256 65534 65535 do - echo -n ${maxval} " " + printf "%d " ${maxval} pgmnoise -maxval=${maxval} -randomseed=1 -plain ${maxval} 10 | \ pamvalidate | pamfile done @@ -78,51 +78,51 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pgmnoise 0 0 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 0 1 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 1 0 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 1 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise 100 -1 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise -randomseed=-1 100 100 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise -maxval=-1 100 100 > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise -maxval=0 100 100 > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmnoise -maxval=$((256 * 256 * 256 * 256)) 10 10 > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pgmramp.test b/test/pgmramp.test index c3b0ad1c..b4dbb3cd 100755 --- a/test/pgmramp.test +++ b/test/pgmramp.test @@ -31,17 +31,17 @@ test_out=${tmpdir}/test_out for combination in "-lr -tb" "-lr -rectangle" "-rectangle -ellipse" do pgmramp $combination 10 10 > ${test_out} || \ - echo -n "Expected failure: $combination" + printf "Expected failure: $combination" test -s ${test_out}; echo " "$? rm -f ${test_out} done pgmramp -lr 1 > ${test_out} || \ - echo -n "Expected failure: insufficient parameters"; \ + printf "Expected failure: insufficient parameters"; \ test -s ${test_out}; echo " "$? rm -f ${test_out} pgmramp -tb 1 1 1 > ${test_out} || \ - echo -n "Expected failure: excessive parameters"; \ + printf "Expected failure: excessive parameters"; \ test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pgmtoppm.test b/test/pgmtoppm.test index d98418b8..36f63de7 100755 --- a/test/pgmtoppm.test +++ b/test/pgmtoppm.test @@ -66,73 +66,73 @@ echo "-----------------------------------------------------------" 1>&2 pgmtoppm white testimg.ppm > \ ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm -map=/dev/null testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm black white testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm hwite testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm off-color testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm rgb-255:7/7/7 testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm -black=black -white=white white testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm -black=rgb:0/0/0 -map=${palette_ppm} testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm -white=rgb:ff/ff/ff -map=${palette_ppm} testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm rgb:ff/ff/ff -map=${palette_ppm} testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} pgmtoppm rgb:00/00/00-rgb:ff/ff/ff -map=${palette_ppm} testgrid.pbm > \ ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} #pgmtoppm rgb-255:7/7/7 testgrid.pbm > \ # ${test_out} || \ -# echo -n "Expected failure 12" +# printf "Expected failure 12" # test -s ${test_out}; echo " "$? # rm -f ${test_out} diff --git a/test/pnmcat.test b/test/pnmcat.test index 173aa608..58ae2642 100755 --- a/test/pnmcat.test +++ b/test/pnmcat.test @@ -95,76 +95,76 @@ echo "-----------------------------------------------------------" 1>&2 # direction not specified pnmcat testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} # both directions specified pnmcat -topbottom -leftright testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} # both pad colors specified pnmcat -topbottom -white -black testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} # justification parameters overspecified pnmcat -lr -jtop -jbottom testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -lr -jtop -jcenter testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -lr -jcenter -jbottom testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -tb -jleft -jright testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -tb -jleft -jcenter testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -tb -jcenter -jright testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} # justification parameter in the wrong direction pnmcat -lr -jleft testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -lr -jright testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -tb -jtop testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcat -tb -jbottom testgrid.pbm testimg.ppm > ${test_out} || \ - echo -n "Expected failure 13" + printf "Expected failure 13" test -s ${test_out}; echo " "$? rm -f ${test_out} # more than one input image from standard input cat testgrid.pbm | pnmcat -lr - - testimg.ppm > ${test_out} || \ - echo -n "Expected failure 14" + printf "Expected failure 14" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pnmcolormap.test b/test/pnmcolormap.test index 089e0d1e..1a7ec266 100755 --- a/test/pnmcolormap.test +++ b/test/pnmcolormap.test @@ -15,37 +15,37 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pnmcolormap 0 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcolormap -1 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcolormap 0.1 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcolormap -center -meancolor 16 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcolormap -center -meanpixel 16 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcolormap -meancolor -meanpixel 16 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmcolormap -spreadbrightness -spreadluminosity 16 \ testimg.ppm > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pnmcrop1.test b/test/pnmcrop1.test index 00d5ee80..3c86efd7 100755 --- a/test/pnmcrop1.test +++ b/test/pnmcrop1.test @@ -78,7 +78,7 @@ for option in "-reportfull -reportsize" \ "-bg-color=black -closeness=101" do pnmcrop -reportfull ${option} testgrid.pbm > ${test_out} || \ - echo -n "Expected failure: " ${option} + printf "Expected failure: %s" "${option}" test -s ${test_out}; echo " "$? rm ${test_out} done diff --git a/test/pnmcrop3.test b/test/pnmcrop3.test index 04cf6f52..1e8da345 100755 --- a/test/pnmcrop3.test +++ b/test/pnmcrop3.test @@ -68,12 +68,12 @@ echo "Error messages should appear below the line." 1>&2 echo "--------------------------------------------" 1>&2 pnmcrop -borderfile=${border_ppm} ${test_pbm} > ${test_out} || \ - echo -n "Expected failure 1"; + printf "Expected failure 1"; test -s ${test_out}; echo " "$? rm ${test_out} pnmcrop -borderfile=${border_pbm} ${test_ppm} > ${test_out} || \ - echo -n "Expected failure 2"; + printf "Expected failure 2"; test -s ${test_out}; echo " "$? rm ${test_out} diff --git a/test/pnmpsnr.test b/test/pnmpsnr.test index 3223f86d..ae6ba3cc 100755 --- a/test/pnmpsnr.test +++ b/test/pnmpsnr.test @@ -36,22 +36,22 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pnmpsnr ${b_pbm} ${w_pbm} ${b_pbm} > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmpsnr ${b_pbm} > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmpsnr ${b_pbm} ${w_pbm} -target1=100 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmpsnr -machine > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pnmquant.test b/test/pnmquant.test index 100fb52e..cbe69f5c 100755 --- a/test/pnmquant.test +++ b/test/pnmquant.test @@ -42,41 +42,41 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pnmquant 0 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmquant testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmquant 10.5 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmquant -center -meancolor 16 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmquant -center -meanpixel 16 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmquant -meancolor -meanpixel 16 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmquant -spreadbrightness -spreadluminosity 16 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmquant -randomseed 1 -norandom 10 testimg.ppm > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pnmremap1.test b/test/pnmremap1.test index fcd382a7..8626c50f 100755 --- a/test/pnmremap1.test +++ b/test/pnmremap1.test @@ -33,32 +33,32 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pnmremap -mapfile=/dev/null testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmremap -mapfile=/dev/zero testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmremap testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmremap -fs -nofs testimg.ppm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmremap -mapfile=testgrid.pbm -missingcolor=rgb:00/ff/00 testimg.ppm \ > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmremap -mapfile=testgrid.pbm -firstisdefault testimg.ppm > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/pnmtile.test b/test/pnmtile.test index b9597467..fd126078 100755 --- a/test/pnmtile.test +++ b/test/pnmtile.test @@ -29,21 +29,21 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 pnmtile 100 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmtile 100 0 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmtile 0 100 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} pnmtile 100 100 100 testgrid.pbm > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/ppmforge-parameters.test b/test/ppmforge-parameters.test index 83758213..e5822673 100755 --- a/test/ppmforge-parameters.test +++ b/test/ppmforge-parameters.test @@ -30,36 +30,36 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 ppmforge -night -dimension=0 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmforge -dimension=10 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmforge -dimension=-1 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmforge -clouds -mesh=1.99 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmforge -clouds -power=0 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmforge -ice=-1 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmforge -glaciers=-1 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/ppmhist.test b/test/ppmhist.test index 34eb0ea0..8c2eedbc 100755 --- a/test/ppmhist.test +++ b/test/ppmhist.test @@ -36,16 +36,16 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 ppmhist -hexcolor -float testimg.ppm > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmhist -hexcolor -map testimg.ppm > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmhist -float -map testimg.ppm > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/ppmmake.test b/test/ppmmake.test index 714573b2..30eb596a 100755 --- a/test/ppmmake.test +++ b/test/ppmmake.test @@ -19,51 +19,51 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 ppmmake rgb:gg/00/00 2 2 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake rgb:ff/ff/00 2 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake rgbi:1.1/0/0 2 2 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake rgbi:1.0/.5 2 2 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake rainbow 2 2 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake 2 2 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake blue -maxval=0 2 2 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake blue -maxval=-1 2 2 > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmmake blue -maxval=65536 2 2 > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} RGBDEF=/dev/null ppmmake red 2 2 > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/ppmpat.test b/test/ppmpat.test index 8f00b9f5..ced2e64a 100755 --- a/test/ppmpat.test +++ b/test/ppmpat.test @@ -50,47 +50,47 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 ppmpat -g2 -g3 10 10 > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -madras -tartan 10 10 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -poles -squig 10 10 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -camo -anticamo 10 10 > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -argyle1 -argyle2 10 10 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat 10 10 > ${test_out} || \ - echo -n "Expected failure 6" + printf "Expected failure 6" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -g2 10 > ${test_out} || \ - echo -n "Expected failure 7" + printf "Expected failure 7" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -g2 10 10 10 > ${test_out} || \ - echo -n "Expected failure 8" + printf "Expected failure 8" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -g2 10 > ${test_out} || \ - echo -n "Expected failure 9" + printf "Expected failure 9" test -s ${test_out}; echo " "$? rm -f ${test_out} @@ -101,89 +101,89 @@ clist4="-color=rgb:00/00/00,rgb:00/00/ff,rgb:00/ff/ff,rgb:ff/ff/ff" # These patterns require exactly 2 colors ppmpat -gingham2 ${clist1} 10 10 > ${test_out} || \ - echo -n "Expected failure 10" + printf "Expected failure 10" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -argyle1 ${clist1} 10 10 > ${test_out} || \ - echo -n "Expected failure 11" + printf "Expected failure 11" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -gingham2 ${clist3} 10 10 > ${test_out} || \ - echo -n "Expected failure 12" + printf "Expected failure 12" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -argyle1 ${clist3} 10 10 > ${test_out} || \ - echo -n "Expected failure 13" + printf "Expected failure 13" test -s ${test_out}; echo " "$? rm -f ${test_out} # These require exactly 3 colors ppmpat -gingham3 ${clist2} 10 10 > ${test_out} || \ - echo -n "Expected failure 14" + printf "Expected failure 14" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -argyle2 ${clist2} 10 10 > ${test_out} || \ - echo -n "Expected failure 15" + printf "Expected failure 15" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -madras ${clist2} 10 10 > ${test_out} || \ - echo -n "Expected failure 16" + printf "Expected failure 16" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -tartan ${clist2} 10 10 > ${test_out} || \ - echo -n "Expected failure 17" + printf "Expected failure 17" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -gingham3 ${clist4} 10 10 > ${test_out} || \ - echo -n "Expected failure 18" + printf "Expected failure 18" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -argyle2 ${clist4} 10 10 > ${test_out} || \ - echo -n "Expected failure 19" + printf "Expected failure 19" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -madras ${clist4} 10 10 > ${test_out} || \ - echo -n "Expected failure 20" + printf "Expected failure 20" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -tartan ${clist4} 10 10 > ${test_out} || \ - echo -n "Expected failure 21" + printf "Expected failure 21" test -s ${test_out}; echo " "$? rm -f ${test_out} # These require at least 3 colors ppmpat -squig ${clist2} 10 10 > ${test_out} || \ - echo -n "Expected failure 22" + printf "Expected failure 22" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -camo ${clist2} 10 10 > ${test_out} || \ - echo -n "Expected failure 23" + printf "Expected failure 23" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -anticamo ${clist2} 10 10 > ${test_out} || \ - echo -n "Expected failure 24" + printf "Expected failure 24" test -s ${test_out}; echo " "$? rm -f ${test_out} # The squig pattern has an aspect ratio restriction ppmpat -squig ${clist3} 10 250 > ${test_out} || \ - echo -n "Expected failure 25" + printf "Expected failure 25" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmpat -squig ${clist3} 500 20 > ${test_out} || \ - echo -n "Expected failure 26" + printf "Expected failure 26" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/ppmtoapplevol.test b/test/ppmtoapplevol.test index 6b109251..4964ede8 100755 --- a/test/ppmtoapplevol.test +++ b/test/ppmtoapplevol.test @@ -15,16 +15,16 @@ tmpdir=${tmpdir:-/tmp} test_out=${tmpdir}/test_out pbmmake 10 11 | ppmtoapplevol > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake 10 13 | ppmtoapplevol > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} pbmmake 256 12 | ppmtoapplevol > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/ppmwheel.test b/test/ppmwheel.test index fc390f26..c6583f97 100755 --- a/test/ppmwheel.test +++ b/test/ppmwheel.test @@ -122,26 +122,26 @@ echo "Error messages should appear below the line." 1>&2 echo "-----------------------------------------------------------" 1>&2 ppmwheel 10 -huevalue -huesaturation > ${test_out} || \ - echo -n "Expected failure 1" + printf "Expected failure 1" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmwheel 0 > ${test_out} || \ - echo -n "Expected failure 2" + printf "Expected failure 2" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmwheel 3 > ${test_out} || \ - echo -n "Expected failure 3" + printf "Expected failure 3" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmwheel > ${test_out} || \ - echo -n "Expected failure 4" + printf "Expected failure 4" test -s ${test_out}; echo " "$? rm -f ${test_out} ppmwheel 10 10 > ${test_out} || \ - echo -n "Expected failure 5" + printf "Expected failure 5" test -s ${test_out}; echo " "$? rm -f ${test_out} diff --git a/test/stdin-ppm2.ok b/test/stdin-ppm2.ok index e3fb4219..e1335bfb 100644 --- a/test/stdin-ppm2.ok +++ b/test/stdin-ppm2.ok @@ -1,11 +1,11 @@ ppmtoacad: 0 0 0 0 ppmtoapplevol: 0 0 0 0 ppmtoascii: 0 0 0 0 +ppmtoicr -windowname testimage: 0 0 0 0 ppmtolj: 0 0 0 0 ppmtomitsu: 0 0 0 0 ppmtopgm: 0 0 0 0 ppmtopuzz: 0 0 0 0 ppmtosixel: 0 0 0 0 ppmtoterm: 0 0 0 0 -ppmtoicr: 0 0 0 0 ppmtoyuvsplit: 0 0 0 0 diff --git a/test/stdin-ppm2.test b/test/stdin-ppm2.test index 81b3954e..e43b6d4c 100755 --- a/test/stdin-ppm2.test +++ b/test/stdin-ppm2.test @@ -17,6 +17,7 @@ for testprog in \ ppmtoacad \ ppmtoapplevol \ ppmtoascii \ + "ppmtoicr -windowname testimage" \ ppmtolj \ ppmtomitsu \ ppmtopgm \ @@ -34,17 +35,6 @@ for testprog in \ rm ${test_ppm} -testprog=ppmtoicr - -# File name embedded in output; "untitled" if no name - - ${testprog} testgrid.pbm > ${out1}; status1=$? - ${testprog} < testgrid.pbm > ${out2}; status2=$? - test -s ${out1}; status3=$? - sed 's/untitled/testgrid.pbm/g' ${out2} | cmp -s ${out1} - - echo ${testprog}": "${status1} ${status2} ${status3} $? - rm ${out1} ${out2} - testprog=ppmtoyuvsplit # Produces three output files diff --git a/test/stdin-ppm3.ok b/test/stdin-ppm3.ok index f7ba5623..42932e92 100644 --- a/test/stdin-ppm3.ok +++ b/test/stdin-ppm3.ok @@ -16,5 +16,5 @@ ppmtopj: 0 0 0 0 pjtoppm: 0 0 0 0 ppmtospu: 0 0 0 0 sputoppm: 0 0 0 0 -ppmtoxpm: 0 0 0 0 +ppmtoxpm -name small: 0 0 0 0 xpmtoppm: 0 0 0 0 diff --git a/test/stdin-ppm3.test b/test/stdin-ppm3.test index 605b535b..064e3e22 100755 --- a/test/stdin-ppm3.test +++ b/test/stdin-ppm3.test @@ -1,4 +1,4 @@ -#! /bin/sh +o#! /bin/sh # This script tests: ppmtobmp bmptopnm # This script tests: ppmtoilbm ilbmtoppm # This script tests: ppmtoleaf leaftoppm @@ -33,26 +33,24 @@ for fmt in \ pj \ spu \ xpm - do - testprog1="ppmto"${fmt} +do + if [ ${fmt} = "xpm" ] + then testprog1="ppmto${fmt} -name small"; + else testprog1="ppmto${fmt}"; + fi if [ ${fmt} = "bmp" ] then testprog2=${fmt}"topnm"; - else testprog2=${fmt}"toppm"; + else testprog2=${fmt}"toppm"; fi if [ ${fmt} = "spu" ] then test_ppm=${large_ppm}; - else test_ppm=${small_ppm}; + else test_ppm=${small_ppm}; fi ${testprog1} ${test_ppm} > ${out1}; status1=$? ${testprog1} < ${test_ppm} > ${out2}; status2=$? test -s ${out1}; status3=$? - if [ ${fmt} = "xpm" ] - then - sed -i '/^static char/s/static char .* = {/static char file/' \ - ${out1} ${out2}; - fi cmp -s ${out1} ${out2} echo ${testprog1}": "${status1} ${status2} ${status3} $? rm ${out2} |