diff options
Diffstat (limited to 'Completion/Linux')
| -rw-r--r-- | Completion/Linux/Command/_btrfs | 265 |
1 files changed, 132 insertions, 133 deletions
diff --git a/Completion/Linux/Command/_btrfs b/Completion/Linux/Command/_btrfs index 77deeefcb..33b5c76f9 100644 --- a/Completion/Linux/Command/_btrfs +++ b/Completion/Linux/Command/_btrfs @@ -1,12 +1,12 @@ #compdef btrfs # based on Btrfs v3.12+20131125 -local curcontext="$curcontext" curstate state line expl grp cmd ret=1 +local curcontext="$curcontext" curstate state line expl grp cmd cont shift ret=1 local -a cmds_1 cmds_2 cmds_3 cmds_4 cmds_5 cmds_6 cmds_7 cmds_8 cmds_9 cmds_10 local -a groups args -groups=( subvolume filesystem device scrub balance inspect-internal - quota qgroup replace rescue check restore send receive +groups=( subvolume filesystem device scrub balance inspect-internal + quota qgroup replace rescue check restore send receive help version ) cmds_1=( create delete list snapshot get-default set-default find-new show help ) cmds_2=( df show sync defragment resize label balance help ) @@ -36,79 +36,32 @@ while (( $#state )); do _wanted command-groups expl 'btrfs command group' compadd -a groups && ret=0 ;; cmds) - : $words - local grp=${groups[(i)$words[2]*]} - : $grp + grp=${groups[(i)$words[2]*]} (( grp && grp <= 14 )) || return 1 - curcontext="${curcontext%:*:*}:$service-${groups[grp]}:" - case $grp in - 11) - # btrfs check - args+=( - {-s,--support}'[specify superblock]:superblock: _message "superblock"' - '--repair[try to repair the filesystem]' - '--init-csum-tree[create a new CRC tree]' - '--init-extent-tree[create a new extent tree]' - '1:path:_files -/' - ) - ;| - 12) - # btrfs replace - args+=( - '-s[get snapshots]' - '-x[get extended attributes]' - '-v[verbose]' - '-i[ignore errors]' - '-o[overwrite]' - '-t[tree location]:tree:_message "tree location"' - '-f[filesystem location]:filesystem:_message "filesystem location"' - '-u[super mirror]:mirror:_message "super mirror"' - '-r[root objectid]:objectid:_message "root objectid"' - '-d[find dir]' - '-l[list tree roots]' - '--path-regex[restore matching filenames]:regex:_message "regex"' - '1:device:_files -/' - '2:path:_files -/' - ) - ;| - 13) - # btrfs send - args+=( - '*-v[verbose mode]' - '-p[send incremental stream]:parent:_files -/' - '*-c[use snapshot as clone source]:clone:_files -/' - '-f[output file]:file:_files' - '1:subvol:_files -/' - ) - ;| - 14) - # btrfs receive - args+=( - '*-v[verbose mode]' - '-f[input file]:file: _files' - '-e[terminate after <end cmd>]' - '1:mount:->mounts' - ) - ;| - <11-14>) - (( CURRENT-- )); shift words; curcontext="${curcontext%:*:*}:$service-${group[grp]}:" - _arguments -C "$args[@]" && ret=0 - ;; - <0-10>) - _wanted commands expl command compadd -a cmds_$grp && ret=0 - ;; - esac - ;; + cont=${groups[grp]} + curcontext="${curcontext%:*:*}:$service-${cont}:" + if (( grp <= 10 )); then + _wanted commands expl command compadd -a cmds_$grp && ret=0 + continue + fi + ;& args) - : $words - local grp=${groups[(i)$words[1]*]} - (( grp && grp <= 15 )) || return 1 - local group=cmds_$grp - local cmd=${${(P)group}[(i)$words[2]*]} - (( cmd )) || return 1 - curcontext="${curcontext%:*:*}:$service-${groups[grp]}-${${(P)group}[cmd]}:" + if [[ $curstate != cmds ]]; then + grp=${groups[(i)$words[1]*]} + (( grp && grp <= 15 )) || return 1 + cont=${groups[grp]} + if (( grp <= 10 )); then + local group=cmds_$grp + local cmd=${${(P)group}[(i)$words[2]*]} + (( cmd )) || return 1 + cont+=:${${(P)group}[cmd]} + else + shift=1 + fi + curcontext="${curcontext%:*:*}:$service-${cont/:/-}:" + fi args=( '(-)--help[print help information]' ) - case ${groups[grp]}:${${(P)group}[cmd]} in + case ${cont} in filesystem:balance) if (( CURRENT == 3 )); then state+=cmds @@ -118,19 +71,19 @@ while (( $#state )); do state+=args fi continue - ;; + ;; subvolume:create) args+=( '1:destination:->mounts' );; subvolume:delete) args+=( '1:subvolume:_files -/' );; - subvolume:snapshot) - args+=( + subvolume:snapshot) + args+=( '-r[readonly snapshot]' '*-i[assign to qgroup]:qgroup: _message "qgroup"' '1:source directory:_files -/' '2:snapshot name or destination:_files -/' ) - ;; - subvolume:list) - args+=( + ;; + subvolume:list) + args+=( '-p[include parent ID in output]' '-a[include all subvolumes]' '-c[include ogeneration of the subvolume]' @@ -145,8 +98,8 @@ while (( $#state )); do '-C[subvolume ogeneration is more or less than]:ogen: _guard "(|+|-)[0-9]#"' '--sort=-[list in order]:sort:_values -s "," sort rootid gen ogen path' '1:path:->mounts' - ) - ;; + ) + ;; subvolume:set-default) args+=( '1:id:_guard "[0-9]#" id' '2:path:->mounts' );; subvolume:get-default) args+=( '1:path:_files -/' );; subvolume:find-new) args+=( '1:subvol:_files -/' '2:lastgen: _message "last gen"' );; @@ -161,27 +114,27 @@ while (( $#state )); do '-l[defragment limited number of bytes]:length (bytes)' '-t[defragment only files over a certain size]:minimum size (bytes)' '*:file:_files' - ) - ;; + ) + ;; filesystem:label) args+=( '1:device:_files -g "*(d)"' '2:label' );; - filesystem:show) - args+=( - '(1 -)'{-d,--all-devices}'[scan all devices in /dev]' + filesystem:show) + args+=( + '(1 -)'{-d,--all-devices}'[scan all devices in /dev]' '(1 -)'{-m,--mounted}'[show only mounted filesystems]' '1: :_guard "^-*" uuid or label' - ) - ;; - device:(add|delete)) - args+=( - '1:device:_files -g "*(d)"' + ) + ;; + device:(add|delete)) + args+=( + '1:device:_files -g "*(d)"' '2:path:->mounts' ) - [[ ${${(P)group}[cmd]} == add ]] && - args+=( + [[ ${${(P)group}[cmd]} == add ]] && + args+=( {-K,--nodiscard}'[do not perform discard]' {-f,--force}'[force overwrite of existing filesystem]' - ) - ;; + ) + ;; device:scan) args+=( '(1 -)--all-devices[scan all devices in /dev]' '1:device:_files -g "*(d)"' );; device:stats) args+=( "1:device or mountpoint:_files -g '*(d,/)'" '-z[reset stats when done]' );; device:ready) args+=( '1:device: _files -g "*(d)"' );; @@ -195,9 +148,9 @@ while (( $#state )); do '-c[set ioprio class]:class:(( 0\:none 1\:realtime 2\:best-effort 3\:idle))' '-n[set ioprio classdata]:classdata:(0 1 2 3 4 5 6 7)' '1:path or device:_files' - ) - [[ ${${(P)group}[cmd]} == start ]] && args+=( '-R[raw print mode]' ) - ;; + ) + [[ ${${(P)group}[cmd]} == start ]] && args+=( '-R[raw print mode]' ) + ;; scrub:cancel) args+=( '1:path or device' );; scrub:status) args+=( '-d[separate statistics for each device]' '1:path or device:_files' );; balance:start) @@ -208,23 +161,23 @@ while (( $#state )); do '-v[verbose mode]' '-f[force reducing of metadata integrity]' '1:path:_files -/' - ) - ;; - balance:status) args+=( '-v[verbose mode]' '2:path:_files -/' );; - balance:(pause|cancel|resume)) args+=( '2:path:_files -/' );; + ) + ;; + balance:status) args+=( '-v[verbose mode]' '1:path:_files -/' );; + balance:(pause|cancel|resume)) args+=( '1:path:_files -/' );; quota:(enable|disable)) args+=( '1:path:_files -/' );; - quota:rescan) - args+=( + quota:rescan) + args+=( '-s[show status of currently running rescan]' '-w[wait for rescan to finish]' - '1:path:_files -/' - ) - ;; - qgroup:(assign|remove)) args+=( '1:source path:_files -/' + '1:path:_files -/' + ) + ;; + qgroup:(assign|remove)) args+=( '1:source path:_files -/' '2:destination path:_files -/' '3:path:_files -/' );; - qgroup:(create|destroy)) args+=( '1:qgroupid:' '2:path:_files -/' );; - qgroup:show) - args+=( + qgroup:(create|destroy)) args+=( '1:qgroupid:' '2:path:_files -/' );; + qgroup:show) + args+=( '-p[print parent qgroup id]' '-c[print child qgroup id]' '-r[print max referenced size of qgroup]' @@ -232,19 +185,19 @@ while (( $#state )); do '-F[list impacted qgroups\(include ancestral qgroups\)]' '-f[list impacted qgroups\(exclude ancestral qgroups\)]' '--sort=-[sort qgroups]:sort:_values -s , sort \ - qgroupid rfer excl max_rfer max_excl' + qgroupid rfer excl max_rfer max_excl' '1:path:_files -/' - ) - ;; - qgroup:limit) - args+=( - '-c[limit amount of data after compression]' - '-e[limit space exclusively to qgroup]' - ':size or none: _message "size or none"' - ':qgroup id or path:_files -/' - ':path:_files -/' - ) - ;; + ) + ;; + qgroup:limit) + args+=( + '-c[limit amount of data after compression]' + '-e[limit space exclusively to qgroup]' + ':size or none: _message "size or none"' + ':qgroup id or path:_files -/' + ':path:_files -/' + ) + ;; replace:start) args+=( '-r[read from <srcdev> only]:srcdev:_files' @@ -253,8 +206,8 @@ while (( $#state )); do ':srcdev or devid:_files' ':target:_files' ':path:->mounts' - ) - ;; + ) + ;; replace:status) args+=( '-1[print once]' ':path:->mounts' );; replace:cancel) args+=( ':path:->mounts' );; inspect*:inode*) args+=( '-v[verbose mode]' '1:inode:_files' '2:path:_files -/' );; @@ -266,28 +219,74 @@ while (( $#state )); do '-s[buffer size]:buffer size:' '1:logical address:_files' '2:filesystem path:_files -/' - ) - ;; + ) + ;; inspect*:rootid) args+=( '1:path:_files -/' );; rescue:(chunk|super)-recover) args+=( '-y[assume yes to every question]' '-v[verbose mode]' - ) - [[ ${${(P)group}[cmd]} == chunk-recover ]] && args+=('-h[display help]') - ;; + ) + [[ ${${(P)group}[cmd]} == chunk-recover ]] && args+=('-h[display help]') + ;; subvolume:get-default) ;& *:sync) ;& *:df) args+=( '1:path:->mounts' );; + check) + args+=( + {-s,--support}'[specify superblock]:superblock' + '--repair[try to repair the filesystem]' + '--init-csum-tree[create a new CRC tree]' + '--init-extent-tree[create a new extent tree]' + '1:path:_files -/' + ) + ;; + restore) + args+=( + '-s[get snapshots]' + '-x[get extended attributes]' + '-v[verbose]' + '-i[ignore errors]' + '-o[overwrite]' + '-t[tree location]:tree' + '-f[filesystem location]:filesystem' + '-u[super mirror]:mirror' + '-r[root objectid]:objectid' + '-d[find dir]' + '-l[list tree roots]' + '--path-regex[restore matching filenames]:regex' + '1:device:_files -/' + '2:path:_files -/' + ) + ;; + send) + args+=( + '*-v[verbose mode]' + '-p[send incremental stream]:parent:_files -/' + '*-c[use snapshot as clone source]:clone:_files -/' + '-f[output file]:file:_files' + '1:subvolume:_files -/' + ) + ;; + receive) + args+=( + '*-v[verbose mode]' + '-f[input file]:file: _files' + '-e[terminate after <end cmd>]' + '1:mount:->mounts' + ) + ;; *) args+=( '*: :_default' );; # fallback for unknown subcommands esac - shift words - (( CURRENT-- )) + if ! (( shift )); then + shift words + (( CURRENT-- )) + fi _arguments -C "$args[@]" && ret=0 ;; mounts) _wanted mount-points expl 'mount point' compadd \ - ${${${(M)${(f)"$(</etc/mtab)"}:#*btrfs*}#* }%% *} && ret=0 + ${${${(M)${(f)"$(</etc/mtab)"}:#*btrfs*}#* }%% *} && ret=0 ;; filters) state=() |