diff options
Diffstat (limited to 'Completion/Linux/Command/_ethtool')
| -rw-r--r-- | Completion/Linux/Command/_ethtool | 60 |
1 files changed, 49 insertions, 11 deletions
diff --git a/Completion/Linux/Command/_ethtool b/Completion/Linux/Command/_ethtool index dccda4684..95a8bbfb6 100644 --- a/Completion/Linux/Command/_ethtool +++ b/Completion/Linux/Command/_ethtool @@ -5,16 +5,21 @@ local -a state line expl cmds local -A opt_args _arguments -C \ + '--debug[turn on debugging messages]:mask:((1\:parser\ information))' \ + '--json[output results in JSON]' \ + '(-I --include-statistics)'{-I,--include-statistics}'[include command-related statistics in the output]' \ + '(cmds)'{-Q,--per-queue}'[apply per-queue command]: :(queue_mask):queue mask' \ "1:interface:_net_interfaces" \ - '*: :->args' \ + '*:: :->args' \ + + '(cmdc)' \ + '(cmds)'{-c,--show-coalesce}'[query the specified ethernet device for coalescing information]' \ + '(cmds)'{-C,--coalesce}'[change the coalescing settings of the specified ethernet device]' \ + '(cmds)' \ '(1)'{-h,--help}'[display help information]' \ '(1)--version[display version information]' \ {-s,--change}'[allow changing some or all settings of the specified ethernet device]' \ {-a,--show-pause}'[query the specified ethernet device for pause parameter information]' \ {-A,--pause}'[change the pause parameters of the specified ethernet device]' \ - {-c,--show-coalesce}'[query the specified ethernet device for coalescing information]' \ - {-C,--coalesce}'[change the coalescing settings of the specified ethernet device]' \ {-g,--show-ring}'[query the specified ethernet device for RX/TX ring parameter information]' \ {-G,--set-ring}'[change the RX/TX ring parameters of the specified ethernet device]' \ {-k,--show-features,--show-offload}'[query the specified ethernet device for offload information]' \ @@ -46,10 +51,21 @@ _arguments -C \ '--set-eee[set EEE settings]' \ '--set-phy-tunable[set PHY tunable]' \ '--get-phy-tunable[get PHY tunable]' \ + '--get-tunable[get tunable parameters]' \ + "--set-tunable[set driver's tunable parameters]" \ '--reset[reset hardware components]' \ '--show-fec[query device for forward error correction support]' \ '--set-fec[configure forward error correction for device]' \ - {-Q,--per-queue}'[apply per-queue command]' && return + '--cable-test[perform cable test and report the results]' \ + '--cable-test-tdr[perform cable test and report Time Domain Reflectometer data]' \ + '--show-tunnels[show tunnel-related device capabilities and state]' \ + '--monitor[listen to netlink notifications and displays them]::command:( + --all -s --change -k --show-features --show-offload -K + --features --offload --show-priv-flags --set-priv-flags -g --show-ring + -G --set-ring -l --show-channels -L --set-channels -c --show-coalesce + -C --coalesce -a --show-pause -A --pause --show-eee --set-eee + --cable-test --cable-test-tdr + )' && return if [[ -n $state ]]; then case $words[CURRENT-1] in @@ -62,7 +78,8 @@ if [[ -n $state ]]; then _wanted onoff expl 'enabled' compadd off on fi ;; - autoneg|adaptive-[rt]x|raw|hex|sg|tso|ufo|gso|lro|eee|tx-lpi|downshift|fast-link-down) + autoneg|adaptive-[rt]x|raw|hex|sg|tso|ufo|gso|lro|eee|tx-lpi|downshift) ;& + fast-link-down|energy-detect-power-down|mode) _wanted onoff expl 'enabled' compadd off on ;; rx-usecs|rx-frames|rx-usecs-irq|rx-frames-irq|tx-usecs|tx-frames) ;& @@ -71,6 +88,8 @@ if [[ -n $state ]]; then rx-frames-high|tx-usecs-high|tx-frames-high|sample-interval|dmac|rx-mini) ;& rx-jumbo|offset|length|magic|value|phyad|proto|tos|tclass|l4proto|src-port) ;& dst-port|spi|l4data|vlan-etype|vlan|user-def|action|vf|queue|loc) ;& + page|bank|i2c|first|last|step|pair|lanes) ;& + rx-copybreak|tx-copybreak|pfc-prevention-tout) ;& other|combined|tx-timer|count|msecs) _message -e numbers 'number' ;; @@ -81,7 +100,10 @@ if [[ -n $state ]]; then _wanted duplex expl 'duplex mode' compadd half full ;; port) - _wanted port expl 'device port' compadd tp aui bnc mii fibre + _wanted port expl 'device port' compadd tp aui bnc mii fibre da + ;; + master-slave) + _wanted roles expl role compadd {preferred,forced}-{master,slave} ;; advertise) _values 'hexadecimal value (or a combination of the following)' \ @@ -93,7 +115,8 @@ if [[ -n $state ]]; then '0x020[1000 full]' \ '0x8000[2500 full(not supported by IEEE standards)]' \ '0x800[10000 full]' \ - '0x03F[auto]' + '0x03F[auto]' \ + 'mode[set mode]' ;; xcvr) _wanted xcvr expl 'transceiver type' compadd internal external @@ -144,7 +167,7 @@ if [[ -n $state ]]; then _message -e contexts 'RSS context' ;; *) - case $words[2] in + case ${${(Mk)opt_args:#cmd?*}[1]#cmd?-} in -A|--pause) _values -S ' ' -w 'pause parameter' \ 'autoneg[specify if pause autonegotiation is enabled]' \ @@ -192,6 +215,9 @@ if [[ -n $state ]]; then -p|--identify) (( CURRENT = 4 )) && _message -e length 'duration (seconds)' ;; + -S|--statistics) + _arguments '(-)--all-groups' '(-)--groups:eth-phy: :eth-mac: :eth-ctrl: :rmon' + ;; -t|--test) _values -S ' ' -w 'test mode' \ '(online)offline:perform full set of tests possibly causing normal operation interruption (default)]' \ @@ -202,8 +228,10 @@ if [[ -n $state ]]; then if (( ! $words[(I)msglvl] )); then _values -S ' ' -w 'generic option' \ 'speed[set speed in Mb/s]' \ + 'lanes[set number of lanes]' \ 'duplex[set full or half duplex mode]' \ 'port[select device port]' \ + 'master-slave[configure interface role]' \ 'autoneg[specify if autonegotiation is enabled]' \ 'advertise[set the speed and duplex advertised by autonegotiation]' \ 'phyad[PHY address]' \ @@ -274,16 +302,23 @@ if [[ -n $state ]]; then fi ;; -m|--dump-module-eeprom|--module-info) - _wanted options expl option compadd -F line - raw hex offset length + _wanted options expl option compadd -F line - raw hex offset \ + length page bank i2c ;; --set-eee) _wanted behaviours expl behaviour compadd -F line - eee advertise tx-lpi tx-timer ;; --set-phy-tunable) - _wanted options expl tunable compadd -F line - downshift count fast-link-down msecs + _wanted options expl tunable compadd -F line - downshift count \ + fast-link-down msecs energy-detect-power-down ;; --get-phy-tunable) - _wanted options expl tunable compadd downshift fast-link-down + _wanted options expl tunable compadd downshift fast-link-down \ + energy-detect-power-down + ;; + --[gs]et-tunable) + _wanted options expl tunable compadd rx-copybreak tx-copybreak \ + pfc-prevention-tout ;; --reset) _wanted components expl component compadd flags dedicated all \ @@ -303,6 +338,9 @@ if [[ -n $state ]]; then _wanted options expl option compadd -c --show-coalescing -C --coalesce fi ;; + --cable-test-tdr) + _wanted options expl 'distance options' compadd first last step pair + ;; esac ;; esac |