about summary refs log tree commit diff
path: root/sysdeps/unix/sysv/linux/sparc/bits
Commit message (Collapse)AuthorAgeFilesLines
* login: structs utmp, utmpx, lastlog _TIME_BITS independence (bug 30701)Florian Weimer2024-04-191-2/+1
| | | | | | | | | These structs describe file formats under /var/log, and should not depend on the definition of _TIME_BITS. This is achieved by defining __WORDSIZE_TIME64_COMPAT32 to 1 on 32-bit ports that support 32-bit time_t values (where __time_t is 32 bits). Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Always define __USE_TIME_BITS64 when 64 bit time_t is usedAdhemerval Zanella2024-04-025-8/+8
| | | | | | | | | | | | | | | | | | | | It was raised on libc-help [1] that some Linux kernel interfaces expect the libc to define __USE_TIME_BITS64 to indicate the time_t size for the kABI. Different than defined by the initial y2038 design document [2], the __USE_TIME_BITS64 is only defined for ABIs that support more than one time_t size (by defining the _TIME_BITS for each module). The 64 bit time_t redirects are now enabled using a different internal define (__USE_TIME64_REDIRECTS). There is no expected change in semantic or code generation. Checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, and arm-linux-gnueabi [1] https://sourceware.org/pipermail/libc-help/2024-January/006557.html [2] https://sourceware.org/glibc/wiki/Y2038ProofnessDesign Reviewed-by: DJ Delorie <dj@redhat.com>
* Update copyright dates with scripts/update-copyrightsPaul Eggert2024-01-0135-35/+35
|
* Update copyright dates with scripts/update-copyrightsJoseph Myers2023-01-0635-35/+35
|
* Expose all MAP_ constants in <sys/mman.h> unconditionally (bug 29375)Andreas Schwab2022-10-101-17/+13
| | | | | POSIX reserves the MAP_ prefix for <sys/mman.h>, so there is no need to conditionalize their definitions on feature test macros.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2022-01-0135-35/+35
| | | | | | | | | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: *** 912-#endif remote: *** 913: remote: *** 914- remote: *** error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
* time: Refactor timesize.h for some ABIsAdhemerval Zanella2021-12-311-0/+22
| | | | | | | | | Commit a4b413135535c83a changed default __TIMESIZE to 64, however it added sub-architecture timesize.h for powerpc, s390, and sparc. Also simplify mips by removing _MIPS_SIM usage (which would require to add sgidefs inclusion.
* y2038: Use a common definition for stat for sparc32Adhemerval Zanella2021-10-061-23/+31
| | | | | | The sparc32 misses support for support done by 4e8521333bea6. Checked on sparcv9-linux-gnu.
* Define PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN)H.J. Lu2021-07-092-99/+20
| | | | | | | | | | | | | The constant PTHREAD_STACK_MIN may be too small for some processors. Rename _SC_SIGSTKSZ_SOURCE to _DYNAMIC_STACK_SIZE_SOURCE. When _DYNAMIC_STACK_SIZE_SOURCE or _GNU_SOURCE are defined, define PTHREAD_STACK_MIN to sysconf(_SC_THREAD_STACK_MIN) which is changed to MIN (PTHREAD_STACK_MIN, sysconf(_SC_MINSIGSTKSZ)). Consolidate <bits/local_lim.h> with <bits/pthread_stack_min.h> to provide a constant target specific PTHREAD_STACK_MIN value. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* y2038: Add __USE_TIME_BITS64 support for socket-constants.hAdhemerval Zanella2021-06-151-2/+34
| | | | | | | | | | | | | | It is only used for !__USE_MISC, the default way uses the kernel headers. The patch also adds the SO_TIMESTAMP, SO_TIMESTAMPNS, and SO_TIMESTAMPING which uses new values for 64-bit time_t kernel interfaces. The __USE_TIME_BITS64 is not defined internally yet, although the internal header is used when building the 64-bit stat implementations. Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* y2038: Use a common definition for shmid_dsAdhemerval Zanella2021-06-151-3/+7
| | | | | | | | | | | | Instead of replicate the same definitions from struct_shmid64_ds.h on the multiple struct_shmid_ds.h, use a common header which is included when required (struct_shmid64_ds_helper.h). The __USE_TIME_BITS64 is not defined internally yet, although the internal header is used when building the 64-bit semctl implementation. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* y2038: Use a common definition for semid_dsAdhemerval Zanella2021-06-151-3/+7
| | | | | | | | | | | | Instead of replicate the same definitions from struct_semid64_ds.h on the multiple struct_semid_ds.h, use a common header which is included when required (struct_semid64_ds_helper.h). The __USE_TIME_BITS64 is not defined internally yet, although the internal header is used when building the 64-bit semctl implementation. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* y2038: Use a common definition for msqid_dsLukasz Majewski2021-06-151-3/+9
| | | | | | | | | | | | Instead of replicate the same definitions from struct_msqid64_ds.h on the multiple struct_msqid_ds.h, use a common header which is included when required (struct_msqid64_ds_helper.h). The __USE_TIME_BITS64 is not defined internally yet, although the internal header is used when building the 64-bit stat implementations. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-0234-34/+34
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* linux: Move the struct stat{64} to struct_stat.hAdhemerval Zanella2020-10-091-39/+10
| | | | | | | | | | | The common definitions are moved to a Linux generic stat.h while the struct stat{64} definition are moved to a arch-specific struct_stat.h header. Checked with a build for all affected ABIs. I also checked on x86_64, i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Remove mknod wrapper functions, move them to symbolsAdhemerval Zanella2020-10-091-6/+0
| | | | | | | | | | | | | | | | | | | This patch removes the mknod and mknodat static wrapper and add the symbols on the libc with the expected names. Both the prototypes of the internal symbol linked by the static wrappers and the inline redirectors are also removed from the installed sys/stat.h header file. The wrapper implementation license LGPL exception is also removed since it is no longer statically linked to binaries. Internally the _STAT_VER* definitions are moved to the arch-specific xstatver.h file. Checked with a build for all affected ABIs. I also checked on x86_64, i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* Remove stat wrapper functions, move them to exported symbolsAdhemerval Zanella2020-10-091-7/+0
| | | | | | | | | | | | | | | | | | | | | | | | This patch removes the stat, stat64, lstat, lstat64, fstat, fstat64, fstatat, and fstatat64 static wrapper and add the symbol on the libc with the expected names. Both the prototypes of the internal symbol linked by the static wrappers and the inline redirectors are also removed from the installed sys/stat.h header file. The wrapper implementation license LGPL exception is also removed since it is no longer statically linked to binaries. Internally the _STAT_VER* definitions are moved to a arch-specific xstatver.h file. The internal defines that redirects internals {f}stat{at} to their {f}xstat{at} counterparts are removed for Linux (!NO_RTLD_HIDDEN). Hurd still requires them since {f}stat{at} pulls extra objects that makes the loader build fail otherwise (I haven't dig into why exactly). Checked with a build for all affected ABIs. I also checked on x86_64, i686, powerpc, powerpc64le, sparcv9, sparc64, s390, and s390x. Reviewed-by: Lukasz Majewski <lukma@denx.de>
* sysv: linux: Add 64-bit time_t variant for shmctlAdhemerval Zanella2020-07-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To provide a y2038 safe interface a new symbol __shmctl64 is added and __shmctl is change to call it instead (it adds some extra buffer copying for the 32 bit time_t implementation). Two new structures are added: 1. kernel_shmid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, and sparc32) require specific implementations due to their kernel ABI. 2. shmid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit shmctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes shmid_ds already contains 64-bit time_t fields and will result in just the __shmctl symbol using the __shmctl64 code. The shmid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low time handling. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using of the 64-bit one. The default 32-bit symbol will allocate and copy the shmid_ds over multiple buffers, but this should be deprecated in favor of the __shmctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysvipc: Remove the linux shm-pad.h fileAdhemerval Zanella2020-07-092-28/+45
| | | | | | | | | | | | | | Each architecture overrides the struct msqid_ds which its required kernel ABI one. Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa, mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le, powerpc64, and powerpc. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* sysv: linux: Add 64-bit time_t variant for msgctlAdhemerval Zanella2020-07-091-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To provide a y2038 safe interface a new symbol __msgctl64 is added and __msgctl is change to call it instead (it adds some extra buffer coping for the 32 bit time_t implementation). Two new structures are added: 1. kernel_msqid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, and sparc32) require specific implementations due to their kernel ABI. 2. msqid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit msgctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes msqid_ds already contains 64-bit time_t fields and will result in just the __msgctl symbol using the __msgctl64 code. The msgid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low time handling. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit time_t. The default 32-bit symbol will allocate and copy the msqid_ds over multiple buffers, but this should be deprecated in favor of the __msgctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com>
* sysvipc: Remove the linux msq-pad.h fileAdhemerval Zanella2020-07-092-26/+47
| | | | | | | | | | | | | | Each architecture overrides the struct msqid_ds which its required kernel ABI one. Checked on x86_64-linux-gnu and some bases sysvipc tests on hppa, mips, mipsle, mips64, mips64le, sparc64, sparcv9, powerpc64le, powerpc64, and powerpc. Tested-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com>
* sysv: linux: Add 64-bit time_t variant for semctlAdhemerval Zanella2020-07-091-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Different than others 64-bit time_t syscalls, the SysIPC interface does not provide a new set of syscall for y2038 safeness. Instead it uses unused fields in semid_ds structure to return the high bits for the timestamps. To provide a y2038 safe interface a new symbol __semctl64 is added and __semctl is change to call it instead (it adds some extra buffer copying for the 32 bit time_t implementation). Two new structures are added: 1. kernel_semid64_ds: used internally only on 32-bit architectures to issue the syscall. A handful of architectures (hppa, i386, mips, powerpc32, sparc32) require specific implementations due their kernel ABI. 2. semid_ds64: this is only for __TIMESIZE != 64 to use along with the 64-bit semctl. It is different than the kernel struct because the exported 64-bit time_t might require different alignment depending on the architecture ABI. So the resulting implementation does: 1. For 64-bit architectures it assumes semid_ds already contains 64-bit time_t fields and will result in just the __semctl symbol using the __semctl64 code. The semid_ds argument is passed as-is to the syscall. 2. For 32-bit architectures with default 64-bit time_t (newer ABIs such riscv32 or arc), it will also result in only one exported symbol but with the required high/low handling. It might be possible to optimize it further to avoid the kernel_semid64_ds to semun transformation if the exported ABI for the architectures matches the expected kernel ABI, but the implementation is already complex enough and don't think this should be a hotspot in any case. 3. Finally for 32-bit architecture with both 32-bit and 64-bit time_t support we follow the already set way to provide one symbol with 64-bit time_t support and implement the 32-bit time_t support using the 64-bit one. The default 32-bit symbol will allocate and copy the semid_ds over multiple buffers, but this should be deprecated in favor of the __semctl64 anyway. Checked on i686-linux-gnu and x86_64-linux-gnu. I also did some sniff tests on powerpc, powerpc64, mips, mips64, armhf, sparcv9, and sparc64. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Alistair Francis <alistair.francis@wdc.com> Tested-by: Vineet Gupta <vgupta@synopsys.com> Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* signal: Add signum-{generic,arch}.hAdhemerval Zanella2020-07-072-39/+66
| | | | | | | | | | | | | | | | | | | | It refactor how signals are defined by each architecture. Instead of include a generic header (bits/signum-generic.h) and undef non-default values in an arch specific header (bits/signum.h) the new scheme uses a common definition (bits/signum-generic.h) and each architectures add its specific definitions on a new header (bits/signum-arch.h). For Linux it requires copy some system default definitions to alpha, hppa, and sparc. They are historical values and newer ports uses the generic Linux signum-arch.h. For Hurd the BSD signum is removed and moved to a new header (it is used currently only on Hurd). Checked on a build against all affected ABIs. Reviewed-by: Carlos O'Donell <carlos@redhat.com> Tested-by: Carlos O'Donell <carlos@redhat.com>
* semctl: Remove the sem-pad.h fileAlistair Francis2020-04-292-26/+39
| | | | | | | Remove the sem-pad.h file and instead have architectures override the struct semid_ds via the bits/types/struct_semid_ds.h file. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* sysv: Define __KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64Alistair Francis2020-04-021-0/+6
| | | | | | | | | | | | | | | | | | | On y2038 safe 32-bit systems the Linux kernel expects itimerval and rusage to use a 32-bit time_t, even though the other time_t's are 64-bit. There are currently no plans to make 64-bit time_t versions of these structs. There are also other occurrences where the time passed to the kernel via timeval doesn't match the wordsize. To handle these cases let's define a new macro __KERNEL_OLD_TIMEVAL_MATCHES_TIMEVAL64. This macro specifies if the kernel's old_timeval matches the new timeval64. This should be 1 for 64-bit architectures except for Alpha's osf syscalls. The define should be 0 for 32-bit architectures and Alpha's osf syscalls. Reviewed-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Use gcc -finput-charset=ascii for check-installed-headers.Stefan Liebler2020-02-131-1/+1
| | | | | | | | | | | | | | | | | | | | A non-ascii character in the installed headers leads now to: error: failure to convert ascii to UTF-8 Such a finding in s390 specific fenv.h leads to fails in GCC testsuite. See glibc commit 08aea89ef67c5780ae734073494df0a451bce20f. Adding this gcc option also to our tests was proposed by Florian Weimer. This change also found a hit in resource.h where now "microseconds" is used. I've adjusted all the resource.h files. I've used the following command to check for further hits in headers. LC_ALL=C find -name "*.h" -exec grep -PHn "[\x80-\xFF]" {} \; Tested on s390x and x86_64. Reviewed-by: Zack Weinberg <zackw@panix.com>
* y2038: Define __suseconds64_t type to be used with struct __timeval64Lukasz Majewski2020-02-071-0/+1
| | | | | | | | | | | | | | | The __suseconds64_t type is supposed to be the 64 bit type across all architectures. It would be mostly used internally in the glibc - however, when passed to Linux kernel (very unlikely), if necessary, it shall be converted to 32 bit type (i.e. __suseconds_t) Build tests: ./src/scripts/build-many-glibcs.py glibcs Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-0134-34/+34
|
* Define __STATFS_MATCHES_STATFS64Alistair Francis2019-10-241-0/+5
| | | | | | | | Add a new macro __STATFS_MATCHES_STATFS64 that specifies if fsblkcnt_t matches fsblkcnt64_t and if fsfilcnt_t matches fsfilcnt64_t. As we don't have the padding we also need to update the overflow checker to not access the undefined members.
* sysvipc: Set ipc_perm mode as mode_t (BZ#18231)Adhemerval Zanella2019-10-101-28/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets the mode field in ipc_perm as mode_t for all architectures, as POSIX specification [1]. The changes required are as follow: 1. It moves the ipc_perm definition out of ipc.h to its own header ipc_perm.h. It also allows consolidate the IPC_* definition on only one header. 2. The generic implementation follow the kernel ipc64_perm size so the syscall can be made directly without temporary buffer copy. However, since glibc defines the MODE field as mode_t, it omits the __PAD1 field (since glibc does not export mode_t as 16-bit for any architecture). It is a two-fold improvement: 2.1. New implementation which follow Linux UAPI will not need to provide an arch-specific ipc-perm.h header neither wrongly use the wrong 16-bit definition from previous default ipc.h (as csky did). 2.1. It allows consolidate ipc_perm definition for architectures that already provide mode_t as 32-bit. 3. All kernel ABIs for the supported architectures already provides the expected padding for mode type extension to 32-bit. However, some architectures the padding has the wrong placement, so it requires the ipc control routines (msgctl, semctl, and shmctl) to adjust the mode field accordingly. Currently they are armeb, microblaze, m68k, s390, and sheb. A new assume is added, __ASSUME_SYSVIPC_BROKEN_MODE_T, which the required ABIs define. 4. For the ABIs that define __ASSUME_SYSVIPC_BROKEN_MODE_T, it also require compat symbols that do not adjust the mode field. Checked on arm-linux-gnueabihf, aarch64-linux-gnu, powerpc64le-linux-gnu, and x86_64-linux-gnu. I also checked the sysvipc tests on hppa-linux-gnu, sh4-linux-gnu, s390x-linux-gnu, and s390-linux-gnu. I also did a sanity test against armeb qemu usermode for the sysvipc tests. [BZ #18231] * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/ipc-perm.h. * sysdeps/unix/sysv/linux/aarch64/bits/ipc.h: Remove file. * sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h [__BYTE_ORDER == __BIG_ENDIAN] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/sysv/linux/microblaze/kernel-features.h: Likewise. * sysdeps/unix/sysv/linux/s390/kernel-features.h [!__s390x__] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/unix/sysv/linux/sh/kernel-features.h (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/unix/sysv/linux/m68k/kernel-features.h: Likewise. * sysdeps/unix/sysv/linux/bits/ipc-perm.h: New file. * sysdeps/unix/sysv/linux/powerpc/bits/ipc-perm.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/ipc-perm.h: Likewise. * sysdeps/unix/sysv/linux/bits/ipc.h (ipc_perm): Move to bits/ipc-perm.h. * sysdeps/unix/sysv/linux/hppa/bits/ipc-perm.h: New file. * sysdeps/unix/sysv/linux/kernel-features.h: Add comment about __ASSUME_SYSVIPC_BROKEN_MODE_T semantic. * sysdeps/unix/sysv/linux/msgctl.c (DEFAULT_VERSION): Define as 2.31 if __ASSUME_SYSVIPC_BROKEN_MODE_T is defined. (msgctl_syscall, __msgctl_mode16): New symbol. (__new_msgctl): Add bits for __ASSUME_SYSVIPC_BROKEN_MODE_T. * sysdeps/unix/sysv/linux/semctl.c: Likewise. * sysdeps/unix/sysv/linux/shmctl.c: Likewise. * sysdeps/unix/sysv/linux/arm/be/libc.abilist (GLIBC_2.31): Add msgctl, semctl, and shmctl. * sysdeps/sysv/linux/microblaze/be/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/be/libc.abilist: Likewise. * conform/data/sys/ipc.h-data: Only xfail {struct ipc_perm} mode_t mode for Hurd. * sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_2.31]: Add msgctl, semctl, and shmctl. * sysdeps/unix/sysv/linux/arm/be/Versions: New file. * sysdeps/unix/sysv/linux/microblaze/be/Versions: Likewise. * sysdeps/unix/sysv/linux/sh/be/Versions: Likewise. [1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_ipc.h.html
* Update bits/mman.h constants and tst-mman-consts.py for Linux 5.3.Joseph Myers2019-09-301-0/+2
| | | | | | | | | | | | | | | | | | The Linux 5.3 uapi headers have some rearrangement relating to MAP_* constants, which includes the effect of adding definitions of MAP_SYNC on powerpc and sparc. This patch updates the corresponding glibc bits/mman.h headers accordingly, and updates the Linux kernel version number in tst-mman-consts.py to reflect that these constants are now current with that kernel version. Tested with build-many-glibcs.py. * sysdeps/unix/sysv/linux/powerpc/bits/mman.h [__USE_MISC] (MAP_SYNC): New macro. * sysdeps/unix/sysv/linux/sparc/bits/mman.h [__USE_MISC] (MAP_SYNC): Likewise. * sysdeps/unix/sysv/linux/tst-mman-consts.py (main): Update Linux kernel version number to 5.3.
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-0734-34/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Linux: Use in-tree copy of SO_ constants for !__USE_MISC [BZ #24532]Florian Weimer2019-07-241-0/+38
| | | | | | | | | | | | | | | | | | | | The kernel changes for a 64-bit time_t on 32-bit architectures resulted in <asm/socket.h> indirectly including <linux/posix_types.h>. The latter is not namespace-clean for the POSIX version of <sys/socket.h>. This issue has persisted across several Linux releases, so this commit creates our own copy of the SO_* definitions for !__USE_MISC mode. The new test socket/tst-socket-consts ensures that the copy is consistent with the kernel definitions (which vary across architectures). The test is tricky to get right because CPPFLAGS includes include/libc-symbols.h, which in turn defines _GNU_SOURCE unconditionally. Tested with build-many-glibcs.py. I verified that a discrepancy in the definitions actually results in a failure of the socket/tst-socket-consts test.
* termios: Consolidate termios.hAdhemerval Zanella2019-01-031-74/+0
| | | | | | | | | | | | | | | | | This patch consolidates the Linux termios.h by removing the arch-specific one. No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/termios-misc.h. * sysdeps/unix/sysv/linux/alpha/bits/termios.h: Remove file. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/bits/termios-misc.h: New file. * sysdeps/unix/sysv/linux/bits/termios.h: Include termios-misc.h.
* termios: Consolidate tcflow symbolic constantsAdhemerval Zanella2019-01-031-4/+1
| | | | | | | | | | | | | | | | | | | | | This patch consolidates the termios symbolic constants for use with tcflow in its own header. The Linux generic implementation values match the kernel UAPI and each architecture with deviate values have their own implementation (currently only mips). No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add termios-tcflow.h. * sysdeps/unix/sysv/linux/bits/termios-tcflow.h: New file. * sysdeps/unix/sysv/linux/mips/bits/termios-tcflow.h: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h (TCSANOW, TCSADRAIN, TCSAFLUSH): Move to termios-tcflow.h. * sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* termios: Consolidate local mode definitionsAdhemerval Zanella2019-01-031-25/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates the termios symbolic constants used for local mode with c_lflag member on its own header. The Linux generic implementation values match the kernel UAPI and each architecture with deviate values have their own implementation (in this case alpha, mips, and powerpc). No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add termios-c_lflag.h. * sysdeps/unix/sysv/linux/bits/termios-c_lflag.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/termios-c_lflag.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios-c_lflag.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios-c_lflag.h: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h (ISIG, ISCANON, ECHO, ECHOE, ECHOK, ECHONL, NOFLSH, TOSTOP, IEXTEN): Move to termios-c_lflag.h. [__USE_MISC || (__USE_XOPEN && !__USE_XOPEN2K)] (XCASE): Likewise. [__USE_MISC] (ECHOCTL, ECHOPRT, ECHOKE, FLUSHO, PENDIN, EXTPROC): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* termios: Consolidate control mode definitionsAdhemerval Zanella2019-01-031-11/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates the termios symbolic constants used for output mode with c_cflag memver on its own header. The Linux generic implementation values match the kernel UAPI and each architecture with deviate values have their own implementation (in this case alpha and powerpc). No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add termios-c_cflag.h. * sysdeps/unix/sysv/linux/bits/termios-c_cflag.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/termios-c_cflag.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios-c_cflag.h: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h (CSIZE, CS5, CS6, CS7, CS8, CSTOPB, CREAD, PARENB, PARODD, HUPCL, CLOCAL): Move to termios-c_cflag.h. * sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* termios: Consolidate Baud Rate Selection definitions (BZ#23783)Adhemerval Zanella2019-01-032-28/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates the termios symbolic constants used for baud rates selection used along with speed_t on its own header. The Linux generic implementation values match the kernel UAPI and each architecture with deviate values have their own implementation (in this case alpha and powerpc). No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. [BZ #23783] * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add termios-baud.h. * sysdeps/unix/sysv/linux/bits/termios-baud.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/termios-baud.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios-baud.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios-baud.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/termios.h (B57600, B115200, B230400, B460800, B500000, B576000, B921600, B1000000, B1152000, B1500000, B2000000, B2500000, B3000000, B3500000, B4000000, __MAX_BAUD): Move to termios-baud.h. [__USE_MISC] (CBAUD, CBAUDEX): Likewise. * sysdeps/unix/sysv/linux/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* termios: Consolidate Output Modes definitionsAdhemerval Zanella2019-01-032-43/+65
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates the termios symbolic constants used for ouput modes with c_oflag member on its own header. The Linux generic implementation values match the kernel UAPI and each architecture with deviate values have their own implementation (in this case alpha, powerpc, and sparc). No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/Makefile (sysdep_routines): Add termios-c_oflag.h. * sysdeps/unix/sysv/linux/bits/termios-c_oflag.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/termios-c_oflag.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios-c_oflag.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios-c_oflag.h: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h (OPOST, OLCUC, ONLCR, OCRNL, ONOCR, ONLRET, OFILL, OFDEL, VTDLY, VT0, VT1): Move to termios-c_oflag.h. [__USE_MISC || __USE_XOPEN] (NLDLY, NL0, NL1, CRDLY, CR0, CR1, CR2, CR3, TABDLY, TAB0, TAB1, TAB2, TAB3, BSDLY, BS0, BS1, FFDLY, FF0, FFR1): Likewise. [USE_MISC] (XTABS): Likewise. * sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h Likewise.
* termios: Consolidate Input Modes definitions.Adhemerval Zanella2019-01-031-17/+1
| | | | | | | | | | | | | | | | | | | | | | | This patch consolidates the termios symbolic constants used for input modes with c_iflag member on its own header. The Linux generic implementation values match the kernel UAPI and each architecture with deviate values have their own implementation (in this case alpha and powerpc). No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/Makefile (sysdeps_headers): Add termios-c_iflag.h. * sysdeps/unix/sysv/linux/bits/termios-c_iflag.h: New file. * sysdeps/unix/sysv/linux/alpha/bits/termios-c_iflag.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios-c_iflag.h: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h (IGNBRK, BRKINT, IGNPAR, PARMRK, INPCK, ISTRIP, INLCR, IGNCR, ICRNL, IXON, IXOFF, IXANY, IUCLC, IMAXBEL, IUTF8): Move to termios-c_iflag.h. * sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* termios: Consolidate termios c_cc symbolic constantsAdhemerval Zanella2019-01-032-22/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates the termios symbolic constants used as subscript for the array c_cc on its own header. The Linux generic implementation values match the kernel UAPI and each architecture with deviate values have their own implementation (in this case alpha, mips64, sparc64, and powerpc). No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/Makefile (sysdeps_headers): Add termios-cc.h. * sysdeps/unix/sysv/linux/bits/termios-c_cc.h: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/termios-c_cc.h: New file. * sysdeps/unix/sysv/linux/mips/bits/termios-c_cc.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios-c_cc.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios-c_cc.h: Likewise. * sysdeps/unix/sysv/linux/bits/termios.h (VINTR, VQUIT, VERASE, VKILL, VEOF, VTIME, VMIN, VSWTC, VSTART, VSTOP, VSUSP, VEOL, VREPRINT, VDISCARD, VWERASE, VLNEXT, VEOLF2): Move to termios-cc.h. * sysdeps/unix/sysv/linux/alpha/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h: Likewise.
* termios: Consolidate struct termiosAdhemerval Zanella2019-01-032-10/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch consolidates the struct termios definition on its own header and adds arch-defined ones for ABIs that deviate from generic implementation. They are: - alpha which has a slight different layout than generic one (c_cc field is defined prior c_line). - sparc and mips which do not have the c_ispeed/c_ospeed fields. No semantic change is expected, checked on a build against x86_64-linux-gnu, alpha-linux-gnu, mips64-linux-gnu, and sparc64-linux-gnu. * sysdeps/unix/sysv/linux/alpha/bits/termios-struct.h: New file. * sysdeps/unix/sysv/linux/bits/termios-struct.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios-struct.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios-struct.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add termios-struct.h. * sysdeps/unix/sysv/linux/bits/termios.h (struct termios): Move to termios-struct.h. * sysdeps/unix/sysv/linux/alpha/bits/termios.h (struct termios): Likewise. * sysdeps/unix/sysv/linux/mips/bits/termios.h (struct termios): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h (struct termios): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h (struct termios): Likewise. * sysdeps/unix/sysv/linux/kernel_termios.h (_HAVE_C_ISPEED, _HAVE_C_OSPEED): Define. * sysdeps/unix/sysv/linux/mips/kernel_termios.h (_HAVE_C_ISPEED, _HAVE_C_OSPEED): Likewise. * sysdeps/unix/sysv/linux/sparc/kernel_termios.h (_HAVE_C_ISPEED, _HAVE_C_OSPEED): Likewise. * sysdeps/unix/sysv/linux/speed.c [_HAVE_STRUCT_TERMIOS_C_OSPEED] (cfsetospeed): Check for define value instead of existence. [_HAVE_STRUCT_TERMIOS_C_ISPEED] (cfsetispeed): Likewise. * sysdeps/unix/sysv/linux/tcgetattr.c [_HAVE_STRUCT_TERMIOS_C_ISPEED && _HAVE_C_ISPEED] (__tcgetattr): Likewise. * sysdeps/unix/sysv/linux/tcsetattr.c [_HAVE_STRUCT_TERMIOS_C_ISPEED && _HAVE_C_ISPEED] (__tcsetattr): Likewise.
* termios: Define TIOCSER_TEMT with __USE_MISC (BZ#17783)Adhemerval Zanella2019-01-031-2/+2
| | | | | | | | | | | | | | | | | | This patch defines TIOCSER_TEMT on all architectures using the __USE_MISC guards similar to BZ#17782 fix. Latest Linux UAPI defines TIOCSER_TEMT with the same value for all architectures, so it is safe to use the value as default for all ABIs. Checked on x86_64linux-gnu and build against sparc64-linux-gnu and powerpc64le-linux-gnu. [BZ #17783] * sysdeps/unix/sysv/linux/bits/termios.h [__USE_MISC] (TIOCSER_TEMT): Define. * sysdeps/unix/sysv/linux/powerpc/bits/termios.h [__USE_MISC] (TIOCSER_TEMT): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/termios.h [__USE_MISC] (TEOCSER_TEMT): Likewise.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-0130-30/+30
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* conform: XFAIL siginfo_t si_band test on sparc64Florian Weimer2018-10-251-1/+6
| | | | | We can use long int on sparcv9, but on sparc64, we must match the int type used by the kernel (and not long int, as in POSIX).
* Y2038: provide size of default time_t for target architectureAlbert ARIBAUD (3ADEV)2018-10-243-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To determine whether the default time_t interfaces are 32-bit and so need conversions, or are 64-bit and so are compatible with the internal 64-bit type without conversions, a macro giving the size of the default time_t is also required. This macro is called __TIMESIZE. This macro can then be used instead of __WORDSIZE in msq-pad.h and shm-pad.h files, which in turn allows removing their x86 variants, and in sem-pad.h files but keeping the x86 variant. This patch was tested by running 'make check' on branch master then applying this patch and running 'make check' again, and checking that both 'make check' yield identical results. This was done on x86_64-linux-gnu and i686-linux-gnu. * bits/timesize.h: New file. * stdlib/Makefile (headers): Add bits/timesize.h. * sysdeps/unix/sysv/linux/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME): Use __TIMESIZE instead of __WORDSIZE. * sysdeps/unix/sysv/linux/bits/sem-pad.h (__SEM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h (__SHM_PAD_AFTER_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h (__MSQ_PAD_AFTER_TIME, __MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME, __SHM_PAD_BETWEEN_TIME_AND_SEGSZ): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h (__MSQ_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h (__SEM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h (__SHM_PAD_BEFORE_TIME): Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Delete file. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/timesize.h: New file.
* Use single bits/shm.h for all architectures.Joseph Myers2018-10-172-108/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After my patch to move SHMLBA to its own header, the bits/shm.h headers for architectures using the Linux kernel still vary in a few ways: the use of __syscall_ulong_t; whether padding for 32-bit systems is present before or after time fields, or missing altogether (mips, x32); whether shm_segsz is before or after the time fields; whether, if after time fields, there is extra padding before shm_segsz. This patch arranges for a single header to be used. __syscall_ulong_t is safe to use everywhere, while bits/shm-pad.h is added with new macros __SHM_PAD_AFTER_TIME, __SHM_PAD_BEFORE_TIME, __SHM_SEGSZ_AFTER_TIME and __SHM_PAD_BETWEEN_TIME_AND_SEGSZ to describe the differences. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/shm-pad.h. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/shm-pad.h>. (shmatt_t): Define as __syscall_ulong_t. (__SHM_PAD_TIME): New macro, depending on [__SHM_PAD_BEFORE_TIME] and [__SHM_PAD_AFTER_TIME]. (struct shmid_ds): Define time fields using __SHM_PAD_TIME. Define shm_segsz and associated padding based on [__SHM_SEGSZ_AFTER_TIME] and [__SHM_PAD_BETWEEN_TIME_AND_SEGSZ]. Use __syscall_ulong_t instead of unsigned long int. [__USE_MISC] (struct shminfo): Use __syscall_ulong_t instead of unsigned long int. [__USE_MISC] (struct shm_info): Likewise. * sysdeps/unix/sysv/linux/bits/shm-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shm.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/shm.h: Likewise.
* Move SHMLBA to its own header.Joseph Myers2018-10-172-4/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | One difference between bits/shm.h headers for architectures using the Linux kernel is the definition of SHMLBA. This was noted in <https://sourceware.org/ml/libc-alpha/2018-09/msg00175.html> as a reason why even a new architecture (C-SKY) might need its own bits/shm.h; thus, splitting it out of bits/shm.h can allow less duplication of headers for new architectures. This patch moves that definition to its own header, bits/shmlba.h, to allow more sharing of headers between architectures. That move allows the arm, ia64 and sh variants of bits/shm.h to be removed, as they had no other significant differences from the generic bits/shm.h; powerpc and x86 have their own bits/shm.h but do not need to get their own bits/shmlba.h because they use the same SHMLBA as the generic header. Other architectures with their own bits/shm.h get their own bits/shmlba.h without being able to remove their own bits/shm.h until the generic one has been adapted to be able to handle more architectures (where, in addition to the differences seen for bits/msq.h and bits/sem.h, the position of shm_segsz in struct shmid_ds also depends on the architecture). Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/shmlba.h. * sysdeps/unix/sysv/linux/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/hppa/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/mips/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. * sysdeps/unix/sysv/linux/powerpc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/sparc/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getshmlba): Remove function declaration. * sysdeps/unix/sysv/linux/x86/bits/shm.h: Include <bits/shmlba.h>. (SHMLBA): Remove macro. (__getpagesize): Remove function declaration. * sysdeps/unix/sysv/linux/arm/bits/shm.h: Remove file. * sysdeps/unix/sysv/linux/ia64/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shm.h: Likewise. * sysdeps/unix/sysv/linux/bits/shmlba.h: New file. * sysdeps/unix/sysv/linux/arm/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sh/bits/shmlba.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/shmlba.h: Likewise.
* Use single bits/sem.h for all architectures.Joseph Myers2018-10-152-92/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/sem.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * The x86 header uses padding after time fields unconditionally (including for both x86_64 ABIs), not just for 32-bit time (unlike in msqid_ds where there is only padding for 32-bit time). Because this padding is present for x32, and is __syscall_ulong_t there, it does have to be __syscall_ulong_t, not unsigned long int. * The MIPS header never uses padding around time fields, even when 32-bit (unlike in msqid_ds where it has endian-dependent padding for 32-bit time). * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other differences, this patch adds macros __SEM_PAD_BEFORE_TIME and __SEM_PAD_AFTER_TIME in a new bits/sem-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/sem.h header. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/sem-pad.h. * sysdeps/unix/sysv/linux/bits/sem.h: Include <bits/sem-pad.h> instead of <bits/wordsize.h>. (__SEM_PAD_TIME): New macro, depending on [__SEM_PAD_BEFORE_TIME] and [__SEM_PAD_AFTER_TIME]. (struct semid_ds): Define time fields using __SEM_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/sem-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/sem.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/sem.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/sem.h: Likewise.
* Use single bits/msq.h for all architectures.Joseph Myers2018-10-112-85/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bits/msq.h headers for architectures using the Linux kernel vary in a few ways: * x32 uses __syscall_ulong_t instead of unsigned long int. * x32 has 64-bit time_t, so no padding around time fields despite __WORDSIZE == 32. * Some older 32-bit big-endian architectures have padding before rather than after time fields, although the preferred generic approach is padding after the time fields independent of endianness. (There are also insubstantial differences such as use of unsigned int for padding instead of unsigned long int, which makes no difference to layout since the padding fields using unsigned int are only present on 32-bit architectures.) For the first, __syscall_ulong_t can be used in the generic version as it's the same as unsigned long int everywhere except x32. For the other two differences, this patch adds macros __MSQ_PAD_BEFORE_TIME and __MSQ_PAD_AFTER_TIME in a new bits/msq-pad.h header, so that header is the only one needing to be provided on architectures with differences in this area, and everything else can go in a single common bits/msq.h header. Once we have __TIMESIZE, the generic bits/msq-pad.h can change to use that instead of __WORDSIZE, at which point the x86 version of bits/msq-pad.h won't be needed either. Tested for x86_64 and x86, and with build-many-glibcs.py. * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/msq-pad.h. * sysdeps/unix/sysv/linux/bits/msq.h: Include <bits/msq-pad.h> instead of <bits/wordsize.h>. (msgqnum_t): Define as __syscall_ulong_t. (msglen_t): Likewise. (__MSQ_PAD_TIME): New macro, depending on [__MSQ_PAD_BEFORE_TIME] and [__MSQ_PAD_AFTER_TIME]. (struct msqid_ds): Define time fields using __MSQ_PAD_TIME. Use __syscall_ulong_t instead of unsigned long int. * sysdeps/unix/sysv/linux/bits/msq-pad.h: New file. * sysdeps/unix/sysv/linux/hppa/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq-pad.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/msq.h: Remove. * sysdeps/unix/sysv/linux/mips/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/msq.h: Likewise. * sysdeps/unix/sysv/linux/x86/bits/msq.h: Likewise.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-07-06 15:49:33 +0000