about summary refs log tree commit diff
path: root/conform
Commit message (Collapse)AuthorAgeFilesLines
* conform: Reformat Makefile.Carlos O'Donell2024-02-251-66/+278
| | | | | | | | Reflow and sort Makefile. No code changes in generated binary artifacts. No regressions on x86_64 and i686.
* Remove ia64-linux-gnuAdhemerval Zanella2024-01-082-6/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux 6.7 removed ia64 from the official tree [1], following the general principle that a glibc port needs upstream support for the architecture in all the components it depends on (binutils, GCC, and the Linux kernel). Apart from the removal of sysdeps/ia64 and sysdeps/unix/sysv/linux/ia64, there are updates to various comments referencing ia64 for which removal of those references seemed appropriate. The configuration is removed from README and build-many-glibcs.py. The CONTRIBUTED-BY, elf/elf.h, manual/contrib.texi (the porting mention), *.po files, config.guess, and longlong.h are not changed. For Linux it allows cleanup some clone2 support on multiple files. The following bug can be closed as WONTFIX: BZ 22634 [2], BZ 14250 [3], BZ 21634 [4], BZ 10163 [5], BZ 16401 [6], and BZ 11585 [7]. [1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=43ff221426d33db909f7159fdf620c3b052e2d1c [2] https://sourceware.org/bugzilla/show_bug.cgi?id=22634 [3] https://sourceware.org/bugzilla/show_bug.cgi?id=14250 [4] https://sourceware.org/bugzilla/show_bug.cgi?id=21634 [5] https://sourceware.org/bugzilla/show_bug.cgi?id=10163 [6] https://sourceware.org/bugzilla/show_bug.cgi?id=16401 [7] https://sourceware.org/bugzilla/show_bug.cgi?id=11585 Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update copyright dates with scripts/update-copyrightsPaul Eggert2024-01-016-6/+6
|
* crypt: Remove libcrypt supportAdhemerval Zanella2023-10-301-5/+0
| | | | | | | | | | | | | | | | | | All the crypt related functions, cryptographic algorithms, and make requirements are removed, with only the exception of md5 implementation which is moved to locale folder since it is required by localedef for integrity protection (libc's locale-reading code does not check these, but localedef does generate them). Besides thec code itself, both internal documentation and the manual is also adjusted. This allows to remove both --enable-crypt and --enable-nss-crypt configure options. Checked with a build for all affected ABIs. Co-authored-by: Zack Weinberg <zack@owlfolio.org> Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* wchar: Define va_list for POSIX (BZ #30035)Adhemerval Zanella2023-05-251-6/+11
| | | | | | | | | | This was uncovered by a recent clang change [1]. Different than ISO C, POSIX states that va_list should be exported by wchar.h [2]. Checked on x86_64-linux-gnu and aarch64-linux-gnu. [1] https://reviews.llvm.org/D137268 [2] https://pubs.opengroup.org/onlinepubs/9699919799.2018edition/basedefs/wchar.h.html
* hurd: Also XFAIL missing SA_NOCLDWAIT on 64bitSamuel Thibault2023-05-011-1/+1
|
* Update copyright dates with scripts/update-copyrightsJoseph Myers2023-01-066-6/+6
|
* hurd: drop SA_SIGINFO availability xfailSamuel Thibault2022-01-151-2/+1
| | | | | BZ #23089 was fixed by d865ff74ba09 ("hurd: implement SA_SIGINFO signal handlers")
* Update copyright dates with scripts/update-copyrightsPaul Eggert2022-01-016-6/+6
| | | | | | | | | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 7061 files FOO. I then removed trailing white space from math/tgmath.h, support/tst-support-open-dev-null-range.c, and sysdeps/x86_64/multiarch/strlen-vec.S, to work around the following obscure pre-commit check failure diagnostics from Savannah. I don't know why I run into these diagnostics whereas others evidently do not. remote: *** 912-#endif remote: *** 913: remote: *** 914- remote: *** error: lines with trailing whitespace found ... remote: *** error: sysdeps/unix/sysv/linux/statx_cp.c: trailing lines
* Use $(pie-default) with conformtestJoseph Myers2021-09-171-1/+2
| | | | | | | | | | | | | | | | | My glibc bot showed that my conformtest changes fail the build of the conformtest execution tests for x86_64-linux-gnu-static-pie, because linking the newly built object with the newly built libc and the associated options normally used for linking requires it to be built as PIE. Add $(pie-default) to the compiler command used so that PIE options are used when required. There's a case for using the whole of $(CFLAGS-.o) (which includes $(pie-default)), but that raises questions of any impact from using optimization flags from CFLAGS in these tests. So for now just use $(pie-default) as the key part of $(CFLAGS-.o) that's definitely needed. Tested with build-many-glibcs.py for x86_64-linux-gnu-static-pie.
* Run conform/ tests using newly built libcJoseph Myers2021-09-172-3/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although the conform/ header tests are built using the headers of the glibc under test, the execution tests from conformtest (a few tests of the values of macros evaluating to string constants) are linked and run with system libc, not the newly built libc. Apart from preventing testing in cross environments, this can be a problem even for native testing. Specifically, it can be useful to do native testing when building with a cross compiler that links with a libc that is not the system libc; for example, on x86_64, you can test all three ABIs that way if the kernel support is present, even if the host OS lacks 32-bit or x32 libraries or they are older than the libraries in the sysroot used by the compiler used to build glibc. This works for almost all tests, but not for these conformtest tests. Arrange for conformtest to link and run test programs similarly to other tests, with consequent refactoring of various variables in Makeconfig to allow passing relevant parts of the link-time command lines down to conformtest. In general, the parts of the link command involving $@ or $^ are separated out from the parts that should be passed to conformtest (the variables passed to conformtest still involve various variables whose names involve $(@F), but those variables simply won't be defined for the conformtest makefile rules and I think their presence there is harmless). This is also most of the support that would be needed to allow running those tests of string constants for cross testing when test-wrapper is defined. That will also need changes to where conformtest.py puts the test executables, so it puts them in the main object directory (expected to be shared with a test system in cross testing) rather than /tmp (not expected to be shared) as at present. Tested for x86_64.
* Allow #pragma GCC in headers in conformtestJoseph Myers2021-08-271-0/+8
| | | | | | | | | | No "#pragma GCC" pragma allows macro-expansion of its arguments, so no namespace issues arise from use of such pragmas in installed headers. Ignore them in conformtest tests of header namespace. Tested for x86_64, in conjunction with Paul's patch <https://sourceware.org/pipermail/libc-alpha/2021-August/130571.html> adding use of such pragmas to installed headers shared with gnulib.
* Update copyright dates with scripts/update-copyrightsPaul Eggert2021-01-026-6/+6
| | | | | | | | | | | | | | | | I used these shell commands: ../glibc/scripts/update-copyrights $PWD/../gnulib/build-aux/update-copyright (cd ../glibc && git commit -am"[this commit message]") and then ignored the output, which consisted lines saying "FOO: warning: copyright statement not found" for each of 6694 files FOO. I then removed trailing white space from benchtests/bench-pthread-locks.c and iconvdata/tst-iconv-big5-hkscs-to-2ucs4.c, to work around this diagnostic from Savannah: remote: *** pre-commit check failed ... remote: *** error: lines with trailing whitespace found remote: error: hook declined to update refs/heads/master
* hurd: Add WSTOPPED/WCONTINUED/WEXITED/WNOWAIT support [BZ #23091]Samuel Thibault2020-12-281-7/+5
| | | | | | The new __proc_waitid RPC now expects WEXITED to be passed, allowing to properly implement waitid, and thus define the missing W* macros (according to FreeBSD values).
* hurd: Remove some remnants of cthreadsSamuel Thibault2020-11-151-2/+3
| | | | | Libc has actually been using mach's lock-internal.h mutex for a long time already.
* Convert Python scripts to Python 3Alistair Francis2020-03-033-3/+3
| | | | | | | | | Change all of the #! lines in Python scripts that are called from Makefiles to reference /usr/bin/python3. All of the scripts called from Makefiles are already run with Python 3, so let's make sure they are explicitly using Python 3 if called manually.
* conform/conformtest.py: Extend tokenizer to cover character constantsFlorian Weimer2020-02-171-6/+5
| | | | Such constants are used in __USE_EXTERN_INLINES blocks.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2020-01-016-6/+6
|
* sysvipc: Set ipc_perm mode as mode_t (BZ#18231)Adhemerval Zanella2019-10-101-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch sets the mode field in ipc_perm as mode_t for all architectures, as POSIX specification [1]. The changes required are as follow: 1. It moves the ipc_perm definition out of ipc.h to its own header ipc_perm.h. It also allows consolidate the IPC_* definition on only one header. 2. The generic implementation follow the kernel ipc64_perm size so the syscall can be made directly without temporary buffer copy. However, since glibc defines the MODE field as mode_t, it omits the __PAD1 field (since glibc does not export mode_t as 16-bit for any architecture). It is a two-fold improvement: 2.1. New implementation which follow Linux UAPI will not need to provide an arch-specific ipc-perm.h header neither wrongly use the wrong 16-bit definition from previous default ipc.h (as csky did). 2.1. It allows consolidate ipc_perm definition for architectures that already provide mode_t as 32-bit. 3. All kernel ABIs for the supported architectures already provides the expected padding for mode type extension to 32-bit. However, some architectures the padding has the wrong placement, so it requires the ipc control routines (msgctl, semctl, and shmctl) to adjust the mode field accordingly. Currently they are armeb, microblaze, m68k, s390, and sheb. A new assume is added, __ASSUME_SYSVIPC_BROKEN_MODE_T, which the required ABIs define. 4. For the ABIs that define __ASSUME_SYSVIPC_BROKEN_MODE_T, it also require compat symbols that do not adjust the mode field. Checked on arm-linux-gnueabihf, aarch64-linux-gnu, powerpc64le-linux-gnu, and x86_64-linux-gnu. I also checked the sysvipc tests on hppa-linux-gnu, sh4-linux-gnu, s390x-linux-gnu, and s390-linux-gnu. I also did a sanity test against armeb qemu usermode for the sysvipc tests. [BZ #18231] * sysdeps/unix/sysv/linux/Makefile (sysdep_headers): Add bits/ipc-perm.h. * sysdeps/unix/sysv/linux/aarch64/bits/ipc.h: Remove file. * sysdeps/unix/sysv/linux/alpha/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/hppa/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/ia64/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/mips/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/s390/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/ipc.h: Likewise. * sysdeps/unix/sysv/linux/arm/kernel-features.h [__BYTE_ORDER == __BIG_ENDIAN] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/sysv/linux/microblaze/kernel-features.h: Likewise. * sysdeps/unix/sysv/linux/s390/kernel-features.h [!__s390x__] (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/unix/sysv/linux/sh/kernel-features.h (__ASSUME_SYSVIPC_BROKEN_MODE_T): Define. * sysdeps/unix/sysv/linux/m68k/kernel-features.h: Likewise. * sysdeps/unix/sysv/linux/bits/ipc-perm.h: New file. * sysdeps/unix/sysv/linux/powerpc/bits/ipc-perm.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/ipc-perm.h: Likewise. * sysdeps/unix/sysv/linux/bits/ipc.h (ipc_perm): Move to bits/ipc-perm.h. * sysdeps/unix/sysv/linux/hppa/bits/ipc-perm.h: New file. * sysdeps/unix/sysv/linux/kernel-features.h: Add comment about __ASSUME_SYSVIPC_BROKEN_MODE_T semantic. * sysdeps/unix/sysv/linux/msgctl.c (DEFAULT_VERSION): Define as 2.31 if __ASSUME_SYSVIPC_BROKEN_MODE_T is defined. (msgctl_syscall, __msgctl_mode16): New symbol. (__new_msgctl): Add bits for __ASSUME_SYSVIPC_BROKEN_MODE_T. * sysdeps/unix/sysv/linux/semctl.c: Likewise. * sysdeps/unix/sysv/linux/shmctl.c: Likewise. * sysdeps/unix/sysv/linux/arm/be/libc.abilist (GLIBC_2.31): Add msgctl, semctl, and shmctl. * sysdeps/sysv/linux/microblaze/be/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/be/libc.abilist: Likewise. * conform/data/sys/ipc.h-data: Only xfail {struct ipc_perm} mode_t mode for Hurd. * sysdeps/unix/sysv/linux/m68k/Versions (libc) [GLIBC_2.31]: Add msgctl, semctl, and shmctl. * sysdeps/unix/sysv/linux/arm/be/Versions: New file. * sysdeps/unix/sysv/linux/microblaze/be/Versions: Likewise. * sysdeps/unix/sysv/linux/sh/be/Versions: Likewise. [1] http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/sys_ipc.h.html
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-076-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* Remove obsolete, never-implemented XSI STREAMS declarationsFlorian Weimer2019-03-142-148/+8
| | | | | | | | | | | | | | | | | | | The stub implementations are turned into compat symbols. Linux actually has two reserved system call numbers (for getpmsg and putpmsg), but these system calls have never been implemented, and there are no plans to implement them, so this patch replaces the wrappers with the generic stubs. According to <https://bugzilla.redhat.com/show_bug.cgi?id=436349>, the presence of the XSI STREAMS declarations is a minor portability hazard because they are not actually implemented. This commit does not change the TIRPC support code in sunrpc/rpc_svcout.c. It uses additional XTI functionality and therefore never worked with glibc. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* Update copyright dates with scripts/update-copyrights.Joseph Myers2019-01-016-6/+6
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Combine more conformtest tests into single execution of the compiler.Joseph Myers2018-11-221-1/+23
| | | | | | | | | | | | | | | | | | | | | | | | | In <https://sourceware.org/ml/libc-alpha/2018-11/msg00225.html>, Florian reported that the change from conformtest.pl to conformtest.py had increased conform/ test time, possibly because of increased startup overhead for Python scripts. This patch improves conformtest.py performance by arranging for as many tests of a (header, standard) pair as possible to use a single execution of the compiler, so it does not need to initialize and parse the whole header under test separately for every test assertion. Specifically, compilation tests that are not marked as "optional" or "xfail" are combined into a single source file, and are only then run separately if compilation of that combined file fails. For me, this reduces the wall clock time for the conformtest.py tests (not the whole of the conform/ directory) from two minutes to 15 seconds. Tested for x86_64, and with build-many-glibcs.py. * conform/conformtest.py (CompileSubTest.__init__): Set self.run_early to False. (ExecuteSubTest.__init__): Likewise. (HeaderTests.run): Try running all non-optional, non-XFAILed compilation tests in a single execution of the compiler.
* Separate conformtest subtest generation and execution.Joseph Myers2018-11-221-65/+105
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch continues moving conformtest towards running more tests in a single compiler execution by separating the generation and execution of the subtests of each test. Instead of test classes having a run method that both generates the text of the programs to be compiled or executed, and compiles or executes them, they are changed to having a gen_subtests method that just generates CompileSubTest and ExecuteSubTest objects to store the subtest names and text, and then a separate loop in HeaderTests.run deals with actually executing those subtests. This will allow for future changes to extract the text for all non-optional, non-xfail compilation subtests to try compiling those all at once, with separate compilations only if that fails, so massively reducing the number of separate compiler executions (each of which needs to parse the entire contents of the header under test, in addition to the startup cost that applies even for compiling an empty file). Tested for x86_64, and with build-many-glibcs.py. * conform/conformtest.py (CompileSubTest): New class. (ExecuteSubTest): Likewise. (ElementTest.run): Rename to gen_subtests. Append tests to self.subtests instead of running them. (ConstantTest.run): Likewise. (SymbolTest.run): Likewise. (TypeTest.run): Likewise. (TagTest.run): Likewise. (FunctionTest.run): Likewise. (VariableTest.run): Likewise. (MacroFunctionTest.run): Likewise. (MacroStrTest.run): Likewise. (HeaderTests.handle_test_line): Generate subtests for tests. (HeaderTests.run): Run subtests for tests.
* Use unique identifiers in conformtest.Joseph Myers2018-11-201-76/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes tests in conformtest use unique identifiers, in preparation for trying to cover more tests in a single compilation to speed up these tests as suggested in <https://sourceware.org/ml/libc-alpha/2018-11/msg00229.html>. Tests are assigned a number, used in generating identifiers; where a single call to a run method does multiple compilations (sharing that number), identifiers are changed as needed to avoid duplication between those compilations, so they can be combined in future. Large numbers of positional arguments to format strings make the code harder to follow, and using the test numbers serves to increase the number of arguments to such format strings, so the code is generally changed to use %(name)s where all the arguments come from attributes of the test object and so vars(self) is sufficient to provide all those names for the format string. Cases where some arguments aren't attributes of self still use positional format arguments. Tested for x86_64, and with build-many-glibcs.py. * conform/conformtest.py (ElementTest.run): Use unique identifiers in tests. Use names for format arguments. (ConstantTest.run): Likewise. (SymbolTest.run): Likewise. (TypeTest.run): Likewise. (TagTest.run): Likewise. (FunctionTest.run): Likewise. (VariableTest.run): Likewise. (MacroFunctionTest.run): Likewise. (MacroStrTest.run): Likewise. (HeaderTests.__init__): Set self.num_tests. (HeaderTests.handle_test_line): Set test.num. Increment self.num_tests.
* Update conform/Makefile mkdir commands.Joseph Myers2018-11-091-2/+2
| | | | | | | | | | | | | | | | conform/Makefile creates $(@D)/scratch for the per-standard per-header tests. That directory was formerly used by the Perl scripts for temporary files, but the Python implementations use tempfile.TemporaryDirectory to get such files cleaned up automatically. This patch changes the Makefile to create only $(@D) (required for the output redirection to work), not the scratch subdirectory. Tested for x86_64. * conform/Makefile ($(conformtest-header-tests)): Create $(@D), not $(@D)/scratch. ($(linknamespace-header-tests)): Likewise.
* Replace conformtest.pl with conformtest.py.Joseph Myers2018-11-0910-995/+709
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the consolidation on Python for various miscellaneous build and test scripts, this patch moves conformtest from Perl to Python. The substance of the tests run is intended to be the same as before, except that the previous test for tags did not actually achieve the intended purpose of verifying whether a tag was already declared, so is changed to one that would actually fail for a tag that wasn't declared, and a typo in the old test for variables being available ($xyzzy instead of xyzzy) would have made that test not use the correct type (but it would have passed anyway with warnings). No attempt is made to keep the details of what the test output looks like; instead, tests are given names which are made to follow PASS: / FAIL: / XFAIL: / SKIP: / MISSING: as appropriate. In the new version, there is more consistent parsing of test lines (into a series of words, either surrounded by {} or separated by spaces) that applies for all kinds of test lines, rather than the old approach of different regular expressions for every kind of test. A few of the conform/data/ files are adjusted so their syntax works with the new script (which now requires spaces in certain cases where the old script tolerated them being missing, and does not allow stray semicolons at the end of "function" lines). Similarly, common logic is used around what happens with a second subtest if a first one fails (e.g., a test for a symbol's type if the test for availability fails), rather than such logic being replicated separately for each kind of test. Common parsing also applies for test lines both when they are lines for the header under test and when they are lines for another header specified with allow-header, again unlike the old script. Tested for x86_64, and with build-many-glibcs.py. * conform/conformtest.py: New file. * conform/conformtest.pl: Remove. * conform/GlibcConform.pm: Likewise. * conform/glibcconform.py (KEYWORDS_C90): New constant. (KEYWORDS_C99): Likewise. (KEYWORDS): Likewise. * conform/Makefile ($(conformtest-header-tests)): Use conformtest.py instead of conformtest.pl. Do not pass --tmpdir option. Use --header instead of --headers. * conform/data/arpa/inet.h-data: Remove trailing semicolons on function entries. * conform/data/spawn.h-data: Likewise. * conform/data/fcntl.h-data (openat): Add space after function name. * conform/data/wchar.h-data (wcscasecmp): Likewise. (wcscasecmp_l): Likewise. * conform/data/termios.h-data (c_cc): Add space after element name.
* Convert linknamespace tests from Perl to Python.Joseph Myers2018-10-303-240/+223
| | | | | | | | | | | | | | | | | | | | | | | | | This patch replaces conform/linknamespace.pl with a new conform/linknamespace.py, so continuing the consolidation on Python instead of Perl for miscellaneous scripts used in building and testing glibc. The new script follows the same logic as the old one; as a recently-added script, there were no major cleanups to be made in the course of the language conversion. Tested for x86_64, and with build-many-glibcs.py. For x86_64 I also tested that if the Perl and Python scripts were made to print all the symbols in seen_where and the paths of symbol references by which those symbols were linked in, even when those symbols were OK, identical symbol lists appeared in the output with both versions of the script (the differences in linknamespace.out files were only in paths to temporary files in diagnostics for e.g. deprecated functions, and error output for the expected compilation failures when testing ndbm.h and varargs.h). * conform/linknamespace.py: New file. * conform/linknamespace.pl: Remove file. * conform/Makefile ($(linknamespace-header-tests)): Use linknamespace.py instead of linknamespace.pl. Do not use --tmpdir option.
* Use tempfile.TemporaryDirectory in conform/glibcconform.py.Joseph Myers2018-10-291-8/+3
| | | | | | | | | | | | | | Now that we require Python 3.4 or later, Python code creating temporary directories can use tempfile.TemporaryDirectory in "with" to have the directory deleted automatically instead of needing to use try/finally to handle removing a directory created with tempfile.mkdtemp. This patch does so in conform/glibcconform.py. Tested for x86_64. * conform/glibcconform.py: Do not import shutil. (list_exported_functions): Use tempfile.TemporaryDirectory instead of mkdtemp.
* Patch to require Python 3.4 or later to build glibc.Joseph Myers2018-10-291-6/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This patch makes Python 3.4 or later a required tool for building glibc, so allowing changes of awk, perl etc. code used in the build and test to Python code without any such changes needing makefile conditionals or to handle older Python versions. This patch makes the configure test for Python check the version and give an error if Python is missing or too old, and removes makefile conditionals that are no longer needed. It does not itself convert any code from another language to Python, and does not remove any compatibility with older Python versions from existing scripts. Tested for x86_64. * configure.ac (PYTHON_PROG): Use AC_CHECK_PROG_VER. Set critic_missing for versions before 3.4. * configure: Regenerated. * manual/install.texi (Tools for Compilation): Document requirement for Python to build glibc. * INSTALL: Regenerated. * Rules [PYTHON]: Make code unconditional. * benchtests/Makefile [PYTHON]: Likewise. * conform/Makefile [PYTHON]: Likewise. * manual/Makefile [PYTHON]: Likewise. * math/Makefile [PYTHON]: Likewise.
* conform: XFAIL siginfo_t si_band test on sparc64Florian Weimer2018-10-252-2/+4
| | | | | We can use long int on sparcv9, but on sparc64, we must match the int type used by the kernel (and not long int, as in POSIX).
* Replace conform/list-header-symbols.pl with a Python script.Joseph Myers2018-08-314-88/+163
| | | | | | | | | | | | | | | | | | | | Continuing the move of test code from Perl to Python (which seems uncontroversial, unlike dependencies on Python in the actual build of glibc), this patch replaces conform/list-header-symbols.pl with a Python script, as a first step in converting the conform/ tests. (conform/glibcconform.py is an equivalent to GlibcConform.pm, containing code that will be relevant to move than one of the conform/ scripts.) Tested for x86_64, including verifying that the symbol lists generated are identical to those generated by the Perl version. * conform/glibcconform.py: New file. * conform/list-header-symbols.py: Likewise. * conform/list-header-symbols.pl: Remove. * conform/Makefile (tests-special): Only add linknamespace tests if [PYTHON]. ($(linknamespace-symlists-tests)): Use list-header-symbols.py.
* Fix C11 conformance issuesAdhemerval Zanella2018-07-251-3/+2
| | | | | | | | | | | | | | | | | | | | | | | Remove conformace assumption of NPTL implementation for ISO C threads and revert wrong libcrypt addition on linknamespace-libs-XPG4. The i686-gnu target now shows two new conformance failures: FAIL: conform/ISO11/threads.h/conform FAIL: conform/ISO11/threads.h/linknamespace It is expected due missing HTL ISO C threads support and both conformance .out files indicates the reason ("#error "HTL does not implement ISO C threads"). Checked on i686-linux-gnu and i686-gnu. * include/threads.h: Move to ... * sysdeps/nptl/threads.h: ... here. * sysdeps/htl/threads.h: New file. * conform/Makefile (linknamespace-libs-ISO11): Use static-thread-library instead of linking libpthread. (linknamespace-libs-XPG4): Revert wrong libcrypt.a addition.
* nptl: Add C11 threads tss_* functionsAdhemerval Zanella2018-07-241-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the tss_* definitions from C11 threads (ISO/IEC 9899:2011), more specifically tss_create, tss_delete, tss_get, tss_set, and required types. Mostly of the definitions are composed based on POSIX conterparts, including tss_t (pthread_key_t). Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * conform/data/threads.h-data (thread_local): New macro. (TSS_DTOR_ITERATIONS): Likewise. (tss_t): New type. (tss_dtor_t): Likewise. (tss_create): New function. (tss_get): Likewise. (tss_set): Likewise. (tss_delete): Likewise. * nptl/Makefile (libpthread-routines): Add tss_create, tss_delete, tss_get, and tss_set objects. * nptl/Versions (libpthread) [GLIBC_2.28]: Likewise. * nptl/tss_create.c: New file. * nptl/tss_delete.c: Likewise. * nptl/tss_get.c: Likewise. * nptl/tss_set.c: Likewise. * sysdeps/nptl/threads.h (thread_local): New define. (TSS_DTOR_ITERATIONS): Likewise. (tss_t): New typedef. (tss_dtor_t): Likewise. (tss_create): New prototype. (tss_get): Likewise. (tss_set): Likewise. (tss_delete): Likewise.
* nptl: Add C11 threads cnd_* functionsAdhemerval Zanella2018-07-241-0/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the cnd_* definitions from C11 threads (ISO/IEC 9899:2011), more specifically cnd_broadcast, cnd_destroy, cnd_init, cnd_signal, cnd_timedwait, cnd_wait, and required types. Mostly of the definitions are composed based on POSIX conterparts, and cnd_t is also based on internal pthreads fields, but with distinct internal layout to avoid possible issues with code interchange (such as trying to pass POSIX structure on C11 functions and to avoid inclusion of pthread.h). The idea is to make it possible to share POSIX internal implementation for mostly of the code making adjust where only required. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * conform/data/threads.h-data (cnd_t): New type. (cnd_init): New function. (cnd_signal): Likewise. (cnd_broadcast): Likewise. (cnd_wait): Likewise. (cnd_timedwait): Likewise. (cnd_destroy): Likewise. * nptl/Makefile (libpthread-routines): Add cnd_broadcast, cnd_destroy, cnd_init, cnd_signal, cnd_timedwait, and cnd_wait object. * nptl/Versions (libpthread) [GLIBC_2.28]: Likewise. * nptl/cnd_broadcast.c: New file. * nptl/cnd_destroy.c: Likewise. * nptl/cnd_init.c: Likewise. * nptl/cnd_signal.c: Likewise. * nptl/cnd_timedwait.c: Likewise. * nptl/cnd_wait.c: Likewise. * sysdeps/nptl/threads.h (cnd_t): New type. (cnd_init): New prototype. (cnd_signa): Likewise. (cnd_broadcast): Likewise. (cnd_wait): Likewise. (cnd_timedwait): Likewise. (cnd_destroy): Likewise.
* nptl: Add C11 threads call_once functionsAdhemerval Zanella2018-07-241-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the call_* definitions from C11 threads (ISO/IEC 9899:2011), more specifically call_once and required types. Mostly of the definitions are composed based on POSIX conterparts,including once_flag (pthread_once_t). The idea is to make possible to share POSIX internal implementations for mostly of the code (and making adjustment only when required). Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * conform/data/threads.h-data (ONCE_FLAG_INIT): New macro. (once_flag): New type. (call_once): New function. * nptl/Makefile (libpthread-routines): Add call_once object. * nptl/Versions (libphread) [GLIBC_2.28]: Add call_once symbol. * nptl/call_once.c: New file. * sysdeps/nptl/threads.h (ONCE_FLAG_INIT): New define. (once_flag): New type. (call_once): New prototype.
* nptl: Add C11 threads mtx_* functionsAdhemerval Zanella2018-07-241-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the mtx_* definitions from C11 threads (ISO/IEC 9899:2011), more specifically mtx_init, mtx_destroy, mtx_lock, mtx_timedlock, mtx_trylock, mtx_unlock, and required types. Mostly of the definitions are composed based on POSIX conterparts, and mtx_t is also based on internal pthread fields, but with a distinct internal layout to avoid possible issues with code interchange (such as trying to pass POSIX structure on C11 functions and to avoid inclusion of pthread.h). The idea is to make possible to share POSIX internal implementations for mostly of the code (and making adjustment only when required). Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * conform/data/threads.h-data (mtx_plain): New constant. (mtx_recursive): Likewise. (mtx_timed): Likewise. (mtx_t): New type. (mtx_init): New function. (mtx_lock): Likewise. (mtx_timedlock): Likewise. (mtx_trylock): Likewise. (mtx_unlock): Likewise. (mtx_destroy): Likewise. * nptl/Makefile (libpthread-routines): Add mtx_destroy, mtx_init, mtx_lock, mtx_timedlock, mtx_trylock, and mtx_unlock object. * nptl/Versions (libpthread) [GLIBC_2.28]): Add mtx_init, mtx_lock, mtx_timedlock, mtx_trylock, mtx_unlock, and mtx_destroy. * nptl/mtx_destroy.c: New file. * nptl/mtx_init.c: Likewise. * nptl/mtx_lock.c: Likewise. * nptl/mtx_timedlock.c: Likewise. * nptl/mtx_trylock.c: Likewise. * nptl/mtx_unlock.c: Likewise. * sysdeps/nptl/threads.h (mtx_plain): New enumeration. (mtx_recursive): Likewise. (mtx_timed): Likewise. (mtx_t): New type. (mtx_init): New prototype. (mtx_lock): Likewise. (mtx_timedlock): Likewise. (mtx_trylock): Likewise. (mtx_unlock): Likewise. (mtx_destroy): Likewise.
* nptl: Add C11 threads thrd_* functionsAdhemerval Zanella2018-07-242-4/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the thrd_* definitions from C11 threads (ISO/IEC 9899:2011), more specifically thrd_create, thrd_curent, rhd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, thrd_yield, and required types. Mostly of the definitions are composed based on POSIX conterparts, such as thrd_t (using pthread_t). For thrd_* function internally direct POSIX pthread call are used with the exceptions: 1. thrd_start uses pthread_create internal implementation, but changes how to actually calls the start routine. This is due the difference in signature between POSIX and C11, where former return a 'void *' and latter 'int'. To avoid calling convention issues due 'void *' to int cast, routines from C11 threads are started slight different than default pthread one. Explicit cast to expected return are used internally on pthread_create and the result is stored back to void also with an explicit cast. 2. thrd_sleep uses nanosleep internal direct syscall to avoid clobbering errno and to handle expected standard return codes. It is a cancellation entrypoint to be consistent with both thrd_join and cnd_{timed}wait. 3. thrd_yield also uses internal direct syscall to avoid errno clobbering. Checked with a build for all major ABI (aarch64-linux-gnu, alpha-linux-gnu, arm-linux-gnueabi, i386-linux-gnu, ia64-linux-gnu, m68k-linux-gnu, microblaze-linux-gnu [1], mips{64}-linux-gnu, nios2-linux-gnu, powerpc{64le}-linux-gnu, s390{x}-linux-gnu, sparc{64}-linux-gnu, and x86_64-linux-gnu). Also ran a full check on aarch64-linux-gnu, x86_64-linux-gnu, i686-linux-gnu, arm-linux-gnueabhf, and powerpc64le-linux-gnu. [BZ #14092] * conform/Makefile (conformtest-headers-ISO11): Add threads.h. (linknamespace-libs-ISO11): Add libpthread.a. * conform/data/threads.h-data: New file: add C11 thrd_* types and functions. * include/stdc-predef.h (__STDC_NO_THREADS__): Remove definition. * nptl/Makefile (headers): Add threads.h. (libpthread-routines): Add new C11 thread thrd_create, thrd_current, thrd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, and thrd_yield. * nptl/Versions (libpthread) [GLIBC_2.28]): Add new C11 thread thrd_create, thrd_current, thrd_detach, thrd_equal, thrd_exit, thrd_join, thrd_sleep, and thrd_yield symbols. * nptl/descr.h (struct pthread): Add c11 field. * nptl/pthreadP.h (ATTR_C11_THREAD): New define. * nptl/pthread_create.c (START_THREAD_DEFN): Call C11 thread start routine with expected function prototype. (__pthread_create_2_1): Add C11 threads check based on attribute value. * sysdeps/unix/sysdep.h (INTERNAL_SYSCALL_CANCEL): New macro. * nptl/thrd_create.c: New file. * nptl/thrd_current.c: Likewise. * nptl/thrd_detach.c: Likewise. * nptl/thrd_equal.c: Likewise. * nptl/thrd_exit.c: Likewise. * nptl/thrd_join.c: Likewise. * nptl/thrd_priv.h: Likewise. * nptl/thrd_sleep.c: Likewise. * nptl/thrd_yield.c: Likewise. * include/threads.h: Likewise.
* conform/conformtest.pl: Escape literal braces in regular expressionsFlorian Weimer2018-07-061-13/+13
| | | | | | | | | | | This suppresses Perl warnings like these: Unescaped left brace in regex is deprecated here (and will be fatal in Perl 5.32), passed through in regex; marked by <-- HERE in m/^element *({ <-- HERE ([^}]*)}|([^{ ]*)) *({([^}]*)}|([^{ ]*)) *([A-Za-z0-9_]*) *(.*)/ at conformtest.pl line 370. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* New configure option --disable-crypt.Zack Weinberg2018-06-291-4/+7
| | | | | | | | Some Linux distributions are experimenting with a new, separately maintained and hopefully more agile implementation of the crypt API. To facilitate this, add a configure option which disables glibc's embedded libcrypt. When this option is given, libcrypt.* and crypt.h will not be built nor installed.
* Disallow use of DES encryption functions in new programs.Zack Weinberg2018-06-292-9/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The functions encrypt, setkey, encrypt_r, setkey_r, cbc_crypt, ecb_crypt, and des_setparity should not be used in new programs, because they use the DES block cipher, which is unacceptably weak by modern standards. Demote all of them to compatibility symbols, and remove their prototypes from installed headers. cbc_crypt, ecb_crypt, and des_setparity were already compat symbols when glibc was configured with --disable-obsolete-rpc. POSIX requires encrypt and setkey to be available when _XOPEN_CRYPT is defined, so this change also removes the definition of X_OPEN_CRYPT from <unistd.h>. The entire "DES Encryption" section is dropped from the manual, as is the mention of AUTH_DES and FIPS 140-2 in the introduction to crypt.texi. The documentation of 'memfrob' cross-referenced the DES Encryption section, which is replaced by a hyperlink to libgcrypt, and while I was in there I spruced up the actual documentation of 'memfrob' and 'strfry' a little. It's still fairly jokey, because those functions _are_ jokes, but they do also have real use cases, so people trying to use them for real should have all the information they need. DES-based authentication for Sun RPC is also insecure and should be deprecated or even removed, but maybe that can be left as TI-RPC's problem.
* hurd xfails: Add missing bug referencesSamuel Thibault2018-04-202-0/+4
|
* hurd: XFAIL tests for signal features not implemented yetSamuel Thibault2018-04-202-7/+7
| | | | | | | * conform/data/signal.h-data (SA_SIGINFO, SA_NOCLDWAIT): XFAIL on i386-gnu. * conform/data/sys/wait.h-data (WIFCONTINUED, WEXITED, WSTOPPED, WCONTINUED, WNOWAIT): XFAIL on i386-gnu.
* hurd: Fix symbols expositionSamuel Thibault2018-04-191-0/+2
| | | | | | | | | * bits/in.h [!__USE_MISC]: Do not define struct ip_opts. * conform/data/netinet/in.h-data: Allow sin_ and sin6_ prefix. * sysdeps/gnu/bits/msq.h (struct msqid_ds): Use __wait_queue struct instead of wait_queue. * sysdeps/gnu/bits/shm.h (struct shmid_ds): Use __vm_area_struct instead of vm_area_struct.
* hurd: xfail some structure fields ABI incompatibility with standardsSamuel Thibault2018-04-196-12/+18
| | | | | | | | | | | | | | | * sysdeps/mach/hurd/i386/Makefile [$(subdir) = conform] (conformtest-xfail-conds): Add i386-gnu. * conform/data/fcntl.h-data (flock.l_type, flock.l_whence): XFAIL for i386-gnu. * conform/data/sys/ipc.h-data (ipc_perm.uid, ipc_perm.gid, ipc_perm.cuid, ipc_perm.cgid): Likewise. * conform/data/sys/msg.h-data (msqid_ds.msg_lspid, msqid_ds.msg_lrpid): Likewise. * conform/data/sys/shm.h-data (shmid_ds.shm_lpid, shmid_ds.shm_cpid): Likewise. * conform/data/sys/stat.h-data (stat.st_dev): Likewise. * conform/data/sys/statvfs.h-data (statvfs.f_fsid): Likewise.
* conform sys/un.h: Allow sun_ prefix, not only sun_lenSamuel Thibault2018-04-181-1/+2
| | | | * conform/data/sys/un.h-data: Allow sun_ prefix.
* hurd: fix conformity test for sys/un.hSamuel Thibault2018-04-181-0/+1
| | | | | | | sun_len is used by BSD systems, and conformant. * conform/data/sys/un.h-data (struct sockaddr_un): Allow sun_len member.
* Don't install libio.h or _G_config.h.Zack Weinberg2018-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We shipped 2.27 with libio.h and _G_config.h still installed but issuing warnings when used. Let's stop installing them early in 2.28 so that we have plenty of time to think of another plan if there are problems. The public stdio.h had a genuine dependency on libio.h for the complete definitions of FILE and cookie_io_functions_t, and a genuine dependency on _G_config.h for the complete definitions of fpos_t and fpos64_t; these are moved to single-type headers. bits/types/struct_FILE.h also provides a handful of accessor and bitflags macros so that code is not duplicated between bits/stdio.h and libio.h. All the other _IO_ and _G_ names used by the public stdio.h can be replaced with either public names or __-names. In order to minimize the risk of breaking our own compatibility code, bits/types/struct_FILE.h preserves the _IO_USE_OLD_IO_FILE mechanism exactly as it was in libio.h, but you have to define _LIBC to use it, or it'll error out. Similarly, _IO_lock_t_defined is preserved exactly, but will error out if used without defining _LIBC. Internally, include/stdio.h continues to include libio.h, and libio.h scrupulously provides every _IO_* and _G_* name that it always did, perhaps now defined in terms of the public names. This is how this patch avoids touching dozens of files throughout glibc and becoming entangled with the _IO_MTSAFE_IO mess. The remaining patches in this series eliminate most of the _G_ names. Tested on x86_64-linux; in addition to the test suite, I installed the library in a sysroot and verified that a simple program that uses stdio.h could be compiled against the installed library, and I also verified that installed stripped libraries are unchanged. * libio/bits/types/__fpos_t.h, libio/bits/types/__fpos64_t.h: New single-type headers split from _G_config.h. * libio/bits/types/cookie_io_functions_t.h * libio/bits/types/struct_FILE.h New single-type headers split from libio.h. * libio/Makefile: Install the above new headers. Don't install libio.h, _G_config.h, bits/libio.h, bits/_G_config.h, or bits/libio-ldbl.h. * libio/_G_config.h, libio/libio.h: Delete file. * libio/bits/libio.h: Remove improper-inclusion guard. Include stdio.h and don't repeat anything that it does. Define _IO_fpos_t as __fpos_t, _IO_fpos64_t as __fpos64_t, _IO_BUFSIZ as BUFSIZ, _IO_va_list as __gnuc_va_list, __io_read_fn as cookie_read_function_t, __io_write_fn as cookie_write_function_t, __io_seek_fn as cookie_seek_function_t, __io_close_fn as cookie_close_function_t, and _IO_cookie_io_functions_t as cookie_io_functions_t. Define _STDIO_USES_IOSTREAM, __HAVE_COLUMN, and _IO_file_flags here, in the "compatibility defines" section. Remove an #if 0 block. Use the "body" macros from bits/types/struct_FILE.h to define _IO_getc_unlocked, _IO_putc_unlocked, _IO_feof_unlocked, and _IO_ferror_unlocked. Move prototypes of __uflow and __overflow... * libio/stdio.h: ...here. Don't include bits/libio.h. Don't define _STDIO_USES_IOSTREAM. Get __gnuc_va_list directly from stdarg.h. Include bits/types/__fpos_t.h, bits/types/__fpos64_t.h, bits/types/struct_FILE.h, and, when __USE_GNU, bits/types/cookie_io_functions_t.h. Use __gnuc_va_list, not _G_va_list; __fpos_t, not _G_fpos_t; __fpos64_t, not _G_fpos64_t; FILE, not struct _IO_FILE; cookie_io_functions_t, not _IO_cookie_io_functions_t; __ssize_t, not _IO_ssize_t. Unconditionally define BUFSIZ as 8192 and EOF as (-1). * libio/bits/stdio.h: Add multiple-include guard. Use the "body" macros from bits/types/struct_FILE.h instead of _IO_* macros from libio.h; use __gnuc_va_list instead of va_list and __ssize_t instead of _IO_ssize_t. * libio/bits/stdio2.h: Similarly. * libio/iolibio.h: Add multiple-include guard. Include bits/libio.h after stdio.h. * libio/libioP.h: Add multiple-include guard. Include stdio.h and bits/libio.h before iolibio.h. * include/bits/types/__fpos_t.h, include/bits/types/__fpos64_t.h * include/bits/types/cookie_io_functions_t.h * include/bits/types/struct_FILE.h: New wrappers. * bits/_G_config.h, sysdeps/unix/sysv/linux/_G_config.h: Get definitions of _G_fpos_t and _G_fpos64_t from bits/types/__fpos_t.h and bits/types/__fpos64_t.h respectively. Remove improper-inclusion guards. * conform/data/stdio.h-data: Update expectations of va_list. * scripts/check-installed-headers.sh: Remove special case for libio.h and _G_config.h.
* Update copyright dates with scripts/update-copyrights.Joseph Myers2018-01-015-5/+5
| | | | | | | * All files with FSF copyright notices: Update copyright dates using scripts/update-copyrights. * locale/programs/charmap-kw.h: Regenerated. * locale/programs/locfile-kw.h: Likewise.
* Fix mcontext_t sigcontext namespace (bug 21457).Joseph Myers2017-08-301-15/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch completes the ucontext.h namespace fixes by fixing issues related to the use of struct sigcontext as mcontext_t, and inclusion of <bits/sigcontext.h> even when struct sigcontext is not so used. Inclusion of <bits/sigcontext.h> by <sys/ucontext.h> is removed; the way to get the sigcontext structure is by including <signal.h> (in a context where __USE_MISC is defined); the sysdeps/generic version of sys/ucontext.h keeps the inclusion by necessity, with a comment about how this is not namespace-clean, but the only configuration that used it, MicroBlaze, gets its own version of the header in this patch. Where mcontext_t was typedefed to struct sigcontext, the contents of struct sigcontext are inserted (with appropriate namespace handling to prefix fields with __ when __USE_MISC is not defined); review should check that this has been done correctly in each case, whether the definition of struct sigcontext comes from glibc headers or from the Linux kernel. This changes C++ name mangling on affected architectures (which do not include x86_64/x86). Tested for x86_64, and with build-many-glibcs.py. 2017-08-14 Joseph Myers <joseph@codesourcery.com> [BZ #21457] * sysdeps/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/generic/sys/ucontext.h: Add comment about use of struct sigcontext and namespace requirements. * sysdeps/i386/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/m68k/sys/ucontext.h: Likewise. * sysdeps/mips/sys/ucontext.h: Likewise. Include <bits/types.h>. * sysdeps/unix/sysv/linux/aarch64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/aarch64/ucontext_i.sym (oEXTENSION): Use __glibc_reserved1 instead of __reserved. * sysdeps/unix/sysv/linux/alpha/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/alpha/ucontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/arm/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/hppa/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/ia64/makecontext.c (__makecontext): Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sigcontext-offsets.sym: Use mcontext_t instead of struct sigcontext. * sysdeps/unix/sysv/linux/ia64/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): New macro. (struct __ia64_fpreg_mcontext): New type. (mcontext_t): Define structure contents rather than using struct sigcontext. (_SC_GR0_OFFSET): Use mcontext_t instead of struct sigcontext. (uc_sigmask): Define using __ctx. (uc_stack): Likewise. * sysdeps/unix/sysv/linux/ia64/sys/procfs.h: Include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/ia64/sys/ptrace.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/microblaze/sys/ucontext.h: New file. * sysdeps/unix/sysv/linux/mips/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/nios2/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/s390/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sh/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/sparc/sys/ucontext.h: Do not include <bits/sigcontext.h>. * sysdeps/unix/sysv/linux/tile/sys/ucontext.h: Do not include <bits/sigcontext.h>. (__ctx): Define earlier. (mcontext_t): Define structure contents rather than using struct sigcontext. * sysdeps/unix/sysv/linux/x86/sys/ucontext.h: Do not include <bits/sigcontext.h>. Include <bits/types.h>. * conform/Makefile (test-xfail-XPG42/signal.h/conform): Remove. (test-xfail-XPG42/sys/wait.h/conform): Likewise. (test-xfail-XPG42/ucontext.h/conform): Likewise. (test-xfail-UNIX98/signal.h/conform): Likewise. (test-xfail-UNIX98/sys/wait.h/conform): Likewise. (test-xfail-UNIX98/ucontext.h/conform): Likewise. (test-xfail-XOPEN2K/signal.h/conform): Likewise. (test-xfail-XOPEN2K/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K/ucontext.h/conform): Likewise. (test-xfail-POSIX2008/signal.h/conform): Likewise. (test-xfail-POSIX2008/sys/wait.h/conform): Likewise. (test-xfail-XOPEN2K8/signal.h/conform): Likewise. (test-xfail-XOPEN2K8/sys/wait.h/conform): Likewise.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-05-21 12:51:24 +0000