diff options
Diffstat (limited to 'sysdeps/gnu/errlist.h')
| -rw-r--r-- | sysdeps/gnu/errlist.h | 799 |
1 files changed, 799 insertions, 0 deletions
diff --git a/sysdeps/gnu/errlist.h b/sysdeps/gnu/errlist.h new file mode 100644 index 0000000000..5d11ed723d --- /dev/null +++ b/sysdeps/gnu/errlist.h @@ -0,0 +1,799 @@ +#ifndef ERR_MAP +#define ERR_MAP(value) value +#endif +_S(ERR_MAP(0), N_("Success")) +#ifdef EPERM +/* +TRANS Only the owner of the file (or other resource) +TRANS or processes with special privileges can perform the operation. */ +_S(ERR_MAP(EPERM), N_("Operation not permitted")) +#endif +#ifdef ENOENT +/* +TRANS This is a ``file doesn't exist'' error +TRANS for ordinary files that are referenced in contexts where they are +TRANS expected to already exist. */ +_S(ERR_MAP(ENOENT), N_("No such file or directory")) +#endif +#ifdef ESRCH +/* +TRANS No process matches the specified process ID. */ +_S(ERR_MAP(ESRCH), N_("No such process")) +#endif +#ifdef EINTR +/* +TRANS An asynchronous signal occurred and prevented +TRANS completion of the call. When this happens, you should try the call +TRANS again. +TRANS +TRANS You can choose to have functions resume after a signal that is handled, +TRANS rather than failing with @code{EINTR}; see @ref{Interrupted +TRANS Primitives}. */ +_S(ERR_MAP(EINTR), N_("Interrupted system call")) +#endif +#ifdef EIO +/* +TRANS Usually used for physical read or write errors. */ +_S(ERR_MAP(EIO), N_("Input/output error")) +#endif +#ifdef ENXIO +/* +TRANS The system tried to use the device +TRANS represented by a file you specified, and it couldn't find the device. +TRANS This can mean that the device file was installed incorrectly, or that +TRANS the physical device is missing or not correctly attached to the +TRANS computer. */ +_S(ERR_MAP(ENXIO), N_("No such device or address")) +#endif +#ifdef E2BIG +/* +TRANS Used when the arguments passed to a new program +TRANS being executed with one of the @code{exec} functions (@pxref{Executing a +TRANS File}) occupy too much memory space. This condition never arises on +TRANS @gnuhurdsystems{}. */ +_S(ERR_MAP(E2BIG), N_("Argument list too long")) +#endif +#ifdef ENOEXEC +/* +TRANS Invalid executable file format. This condition is detected by the +TRANS @code{exec} functions; see @ref{Executing a File}. */ +_S(ERR_MAP(ENOEXEC), N_("Exec format error")) +#endif +#ifdef EBADF +/* +TRANS For example, I/O on a descriptor that has been +TRANS closed or reading from a descriptor open only for writing (or vice +TRANS versa). */ +_S(ERR_MAP(EBADF), N_("Bad file descriptor")) +#endif +#ifdef ECHILD +/* +TRANS This error happens on operations that are +TRANS supposed to manipulate child processes, when there aren't any processes +TRANS to manipulate. */ +_S(ERR_MAP(ECHILD), N_("No child processes")) +#endif +#ifdef EDEADLK +/* +TRANS Allocating a system resource would have resulted in a +TRANS deadlock situation. The system does not guarantee that it will notice +TRANS all such situations. This error means you got lucky and the system +TRANS noticed; it might just hang. @xref{File Locks}, for an example. */ +_S(ERR_MAP(EDEADLK), N_("Resource deadlock avoided")) +#endif +#ifdef ENOMEM +/* +TRANS The system cannot allocate more virtual memory +TRANS because its capacity is full. */ +_S(ERR_MAP(ENOMEM), N_("Cannot allocate memory")) +#endif +#ifdef EACCES +/* +TRANS The file permissions do not allow the attempted operation. */ +_S(ERR_MAP(EACCES), N_("Permission denied")) +#endif +#ifdef EFAULT +/* +TRANS An invalid pointer was detected. +TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. */ +_S(ERR_MAP(EFAULT), N_("Bad address")) +#endif +#ifdef ENOTBLK +/* +TRANS A file that isn't a block special file was given in a situation that +TRANS requires one. For example, trying to mount an ordinary file as a file +TRANS system in Unix gives this error. */ +_S(ERR_MAP(ENOTBLK), N_("Block device required")) +#endif +#ifdef EBUSY +/* +TRANS A system resource that can't be shared is already in use. +TRANS For example, if you try to delete a file that is the root of a currently +TRANS mounted filesystem, you get this error. */ +_S(ERR_MAP(EBUSY), N_("Device or resource busy")) +#endif +#ifdef EEXIST +/* +TRANS An existing file was specified in a context where it only +TRANS makes sense to specify a new file. */ +_S(ERR_MAP(EEXIST), N_("File exists")) +#endif +#ifdef EXDEV +/* +TRANS An attempt to make an improper link across file systems was detected. +TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but +TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). */ +_S(ERR_MAP(EXDEV), N_("Invalid cross-device link")) +#endif +#ifdef ENODEV +/* +TRANS The wrong type of device was given to a function that expects a +TRANS particular sort of device. */ +_S(ERR_MAP(ENODEV), N_("No such device")) +#endif +#ifdef ENOTDIR +/* +TRANS A file that isn't a directory was specified when a directory is required. */ +_S(ERR_MAP(ENOTDIR), N_("Not a directory")) +#endif +#ifdef EISDIR +/* +TRANS You cannot open a directory for writing, +TRANS or create or remove hard links to it. */ +_S(ERR_MAP(EISDIR), N_("Is a directory")) +#endif +#ifdef EINVAL +/* +TRANS This is used to indicate various kinds of problems +TRANS with passing the wrong argument to a library function. */ +_S(ERR_MAP(EINVAL), N_("Invalid argument")) +#endif +#ifdef EMFILE +/* +TRANS The current process has too many files open and can't open any more. +TRANS Duplicate descriptors do count toward this limit. +TRANS +TRANS In BSD and GNU, the number of open files is controlled by a resource +TRANS limit that can usually be increased. If you get this error, you might +TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; +TRANS @pxref{Limits on Resources}. */ +_S(ERR_MAP(EMFILE), N_("Too many open files")) +#endif +#ifdef ENFILE +/* +TRANS There are too many distinct file openings in the entire system. Note +TRANS that any number of linked channels count as just one file opening; see +TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. */ +_S(ERR_MAP(ENFILE), N_("Too many open files in system")) +#endif +#ifdef ENOTTY +/* +TRANS Inappropriate I/O control operation, such as trying to set terminal +TRANS modes on an ordinary file. */ +_S(ERR_MAP(ENOTTY), N_("Inappropriate ioctl for device")) +#endif +#ifdef ETXTBSY +/* +TRANS An attempt to execute a file that is currently open for writing, or +TRANS write to a file that is currently being executed. Often using a +TRANS debugger to run a program is considered having it open for writing and +TRANS will cause this error. (The name stands for ``text file busy''.) This +TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. */ +_S(ERR_MAP(ETXTBSY), N_("Text file busy")) +#endif +#ifdef EFBIG +/* +TRANS The size of a file would be larger than allowed by the system. */ +_S(ERR_MAP(EFBIG), N_("File too large")) +#endif +#ifdef ENOSPC +/* +TRANS Write operation on a file failed because the +TRANS disk is full. */ +_S(ERR_MAP(ENOSPC), N_("No space left on device")) +#endif +#ifdef ESPIPE +/* +TRANS Invalid seek operation (such as on a pipe). */ +_S(ERR_MAP(ESPIPE), N_("Illegal seek")) +#endif +#ifdef EROFS +/* +TRANS An attempt was made to modify something on a read-only file system. */ +_S(ERR_MAP(EROFS), N_("Read-only file system")) +#endif +#ifdef EMLINK +/* +TRANS The link count of a single file would become too large. +TRANS @code{rename} can cause this error if the file being renamed already has +TRANS as many links as it can take (@pxref{Renaming Files}). */ +_S(ERR_MAP(EMLINK), N_("Too many links")) +#endif +#ifdef EPIPE +/* +TRANS There is no process reading from the other end of a pipe. +TRANS Every library function that returns this error code also generates a +TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled +TRANS or blocked. Thus, your program will never actually see @code{EPIPE} +TRANS unless it has handled or blocked @code{SIGPIPE}. */ +_S(ERR_MAP(EPIPE), N_("Broken pipe")) +#endif +#ifdef EDOM +/* +TRANS Used by mathematical functions when an argument value does +TRANS not fall into the domain over which the function is defined. */ +_S(ERR_MAP(EDOM), N_("Numerical argument out of domain")) +#endif +#ifdef ERANGE +/* +TRANS Used by mathematical functions when the result value is +TRANS not representable because of overflow or underflow. */ +_S(ERR_MAP(ERANGE), N_("Numerical result out of range")) +#endif +#ifdef EAGAIN +/* +TRANS The call might work if you try again +TRANS later. The macro @code{EWOULDBLOCK} is another name for @code{EAGAIN}; +TRANS they are always the same in @theglibc{}. +TRANS +TRANS This error can happen in a few different situations: +TRANS +TRANS @itemize @bullet +TRANS @item +TRANS An operation that would block was attempted on an object that has +TRANS non-blocking mode selected. Trying the same operation again will block +TRANS until some external condition makes it possible to read, write, or +TRANS connect (whatever the operation). You can use @code{select} to find out +TRANS when the operation will be possible; @pxref{Waiting for I/O}. +TRANS +TRANS @strong{Portability Note:} In many older Unix systems, this condition +TRANS was indicated by @code{EWOULDBLOCK}, which was a distinct error code +TRANS different from @code{EAGAIN}. To make your program portable, you should +TRANS check for both codes and treat them the same. +TRANS +TRANS @item +TRANS A temporary resource shortage made an operation impossible. @code{fork} +TRANS can return this error. It indicates that the shortage is expected to +TRANS pass, so your program can try the call again later and it may succeed. +TRANS It is probably a good idea to delay for a few seconds before trying it +TRANS again, to allow time for other processes to release scarce resources. +TRANS Such shortages are usually fairly serious and affect the whole system, +TRANS so usually an interactive program should report the error to the user +TRANS and return to its command loop. +TRANS @end itemize */ +_S(ERR_MAP(EAGAIN), N_("Resource temporarily unavailable")) +#endif +#ifdef EINPROGRESS +/* +TRANS An operation that cannot complete immediately was initiated on an object +TRANS that has non-blocking mode selected. Some functions that must always +TRANS block (such as @code{connect}; @pxref{Connecting}) never return +TRANS @code{EAGAIN}. Instead, they return @code{EINPROGRESS} to indicate that +TRANS the operation has begun and will take some time. Attempts to manipulate +TRANS the object before the call completes return @code{EALREADY}. You can +TRANS use the @code{select} function to find out when the pending operation +TRANS has completed; @pxref{Waiting for I/O}. */ +_S(ERR_MAP(EINPROGRESS), N_("Operation now in progress")) +#endif +#ifdef EALREADY +/* +TRANS An operation is already in progress on an object that has non-blocking +TRANS mode selected. */ +_S(ERR_MAP(EALREADY), N_("Operation already in progress")) +#endif +#ifdef ENOTSOCK +/* +TRANS A file that isn't a socket was specified when a socket is required. */ +_S(ERR_MAP(ENOTSOCK), N_("Socket operation on non-socket")) +#endif +#ifdef EMSGSIZE +/* +TRANS The size of a message sent on a socket was larger than the supported +TRANS maximum size. */ +_S(ERR_MAP(EMSGSIZE), N_("Message too long")) +#endif +#ifdef EPROTOTYPE +/* +TRANS The socket type does not support the requested communications protocol. */ +_S(ERR_MAP(EPROTOTYPE), N_("Protocol wrong type for socket")) +#endif +#ifdef ENOPROTOOPT +/* +TRANS You specified a socket option that doesn't make sense for the +TRANS particular protocol being used by the socket. @xref{Socket Options}. */ +_S(ERR_MAP(ENOPROTOOPT), N_("Protocol not available")) +#endif +#ifdef EPROTONOSUPPORT +/* +TRANS The socket domain does not support the requested communications protocol +TRANS (perhaps because the requested protocol is completely invalid). +TRANS @xref{Creating a Socket}. */ +_S(ERR_MAP(EPROTONOSUPPORT), N_("Protocol not supported")) +#endif +#ifdef ESOCKTNOSUPPORT +/* +TRANS The socket type is not supported. */ +_S(ERR_MAP(ESOCKTNOSUPPORT), N_("Socket type not supported")) +#endif +#ifdef EOPNOTSUPP +/* +TRANS The operation you requested is not supported. Some socket functions +TRANS don't make sense for all types of sockets, and others may not be +TRANS implemented for all communications protocols. On @gnuhurdsystems{}, this +TRANS error can happen for many calls when the object does not support the +TRANS particular operation; it is a generic indication that the server knows +TRANS nothing to do for that call. */ +_S(ERR_MAP(EOPNOTSUPP), N_("Operation not supported")) +#endif +#ifdef EPFNOSUPPORT +/* +TRANS The socket communications protocol family you requested is not supported. */ +_S(ERR_MAP(EPFNOSUPPORT), N_("Protocol family not supported")) +#endif +#ifdef EAFNOSUPPORT +/* +TRANS The address family specified for a socket is not supported; it is +TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. */ +_S(ERR_MAP(EAFNOSUPPORT), N_("Address family not supported by protocol")) +#endif +#ifdef EADDRINUSE +/* +TRANS The requested socket address is already in use. @xref{Socket Addresses}. */ +_S(ERR_MAP(EADDRINUSE), N_("Address already in use")) +#endif +#ifdef EADDRNOTAVAIL +/* +TRANS The requested socket address is not available; for example, you tried +TRANS to give a socket a name that doesn't match the local host name. +TRANS @xref{Socket Addresses}. */ +_S(ERR_MAP(EADDRNOTAVAIL), N_("Cannot assign requested address")) +#endif +#ifdef ENETDOWN +/* +TRANS A socket operation failed because the network was down. */ +_S(ERR_MAP(ENETDOWN), N_("Network is down")) +#endif +#ifdef ENETUNREACH +/* +TRANS A socket operation failed because the subnet containing the remote host +TRANS was unreachable. */ +_S(ERR_MAP(ENETUNREACH), N_("Network is unreachable")) +#endif +#ifdef ENETRESET +/* +TRANS A network connection was reset because the remote host crashed. */ +_S(ERR_MAP(ENETRESET), N_("Network dropped connection on reset")) +#endif +#ifdef ECONNABORTED +/* +TRANS A network connection was aborted locally. */ +_S(ERR_MAP(ECONNABORTED), N_("Software caused connection abort")) +#endif +#ifdef ECONNRESET +/* +TRANS A network connection was closed for reasons outside the control of the +TRANS local host, such as by the remote machine rebooting or an unrecoverable +TRANS protocol violation. */ +_S(ERR_MAP(ECONNRESET), N_("Connection reset by peer")) +#endif +#ifdef ENOBUFS +/* +TRANS The kernel's buffers for I/O operations are all in use. In GNU, this +TRANS error is always synonymous with @code{ENOMEM}; you may get one or the +TRANS other from network operations. */ +_S(ERR_MAP(ENOBUFS), N_("No buffer space available")) +#endif +#ifdef EISCONN +/* +TRANS You tried to connect a socket that is already connected. +TRANS @xref{Connecting}. */ +_S(ERR_MAP(EISCONN), N_("Transport endpoint is already connected")) +#endif +#ifdef ENOTCONN +/* +TRANS The socket is not connected to anything. You get this error when you +TRANS try to transmit data over a socket, without first specifying a +TRANS destination for the data. For a connectionless socket (for datagram +TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. */ +_S(ERR_MAP(ENOTCONN), N_("Transport endpoint is not connected")) +#endif +#ifdef EDESTADDRREQ +/* +TRANS No default destination address was set for the socket. You get this +TRANS error when you try to transmit data over a connectionless socket, +TRANS without first specifying a destination for the data with @code{connect}. */ +_S(ERR_MAP(EDESTADDRREQ), N_("Destination address required")) +#endif +#ifdef ESHUTDOWN +/* +TRANS The socket has already been shut down. */ +_S(ERR_MAP(ESHUTDOWN), N_("Cannot send after transport endpoint shutdown")) +#endif +#ifdef ETOOMANYREFS +_S(ERR_MAP(ETOOMANYREFS), N_("Too many references: cannot splice")) +#endif +#ifdef ETIMEDOUT +/* +TRANS A socket operation with a specified timeout received no response during +TRANS the timeout period. */ +_S(ERR_MAP(ETIMEDOUT), N_("Connection timed out")) +#endif +#ifdef ECONNREFUSED +/* +TRANS A remote host refused to allow the network connection (typically because +TRANS it is not running the requested service). */ +_S(ERR_MAP(ECONNREFUSED), N_("Connection refused")) +#endif +#ifdef ELOOP +/* +TRANS Too many levels of symbolic links were encountered in looking up a file name. +TRANS This often indicates a cycle of symbolic links. */ +_S(ERR_MAP(ELOOP), N_("Too many levels of symbolic links")) +#endif +#ifdef ENAMETOOLONG +/* +TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for +TRANS Files}) or host name too long (in @code{gethostname} or +TRANS @code{sethostname}; @pxref{Host Identification}). */ +_S(ERR_MAP(ENAMETOOLONG), N_("File name too long")) +#endif +#ifdef EHOSTDOWN +/* +TRANS The remote host for a requested network connection is down. */ +_S(ERR_MAP(EHOSTDOWN), N_("Host is down")) +#endif +/* +TRANS The remote host for a requested network connection is not reachable. */ +#ifdef EHOSTUNREACH +_S(ERR_MAP(EHOSTUNREACH), N_("No route to host")) +#endif +#ifdef ENOTEMPTY +/* +TRANS Directory not empty, where an empty directory was expected. Typically, +TRANS this error occurs when you are trying to delete a directory. */ +_S(ERR_MAP(ENOTEMPTY), N_("Directory not empty")) +#endif +#ifdef EUSERS +/* +TRANS The file quota system is confused because there are too many users. +TRANS @c This can probably happen in a GNU system when using NFS. */ +_S(ERR_MAP(EUSERS), N_("Too many users")) +#endif +#ifdef EDQUOT +/* +TRANS The user's disk quota was exceeded. */ +_S(ERR_MAP(EDQUOT), N_("Disk quota exceeded")) +#endif +#ifdef ESTALE +/* +TRANS This indicates an internal confusion in the +TRANS file system which is due to file system rearrangements on the server host +TRANS for NFS file systems or corruption in other file systems. +TRANS Repairing this condition usually requires unmounting, possibly repairing +TRANS and remounting the file system. */ +_S(ERR_MAP(ESTALE), N_("Stale file handle")) +#endif +#ifdef EREMOTE +/* +TRANS An attempt was made to NFS-mount a remote file system with a file name that +TRANS already specifies an NFS-mounted file. +TRANS (This is an error on some operating systems, but we expect it to work +TRANS properly on @gnuhurdsystems{}, making this error code impossible.) */ +_S(ERR_MAP(EREMOTE), N_("Object is remote")) +#endif +#ifdef ENOLCK +/* +TRANS This is used by the file locking facilities; see +TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but +TRANS it can result from an operation to an NFS server running another +TRANS operating system. */ +_S(ERR_MAP(ENOLCK), N_("No locks available")) +#endif +#ifdef ENOSYS +/* +TRANS This indicates that the function called is +TRANS not implemented at all, either in the C library itself or in the +TRANS operating system. When you get this error, you can be sure that this +TRANS particular function will always fail with @code{ENOSYS} unless you +TRANS install a new version of the C library or the operating system. */ +_S(ERR_MAP(ENOSYS), N_("Function not implemented")) +#endif +#ifdef EILSEQ +/* +TRANS While decoding a multibyte character the function came along an invalid +TRANS or an incomplete sequence of bytes or the given wide character is invalid. */ +_S(ERR_MAP(EILSEQ), N_("Invalid or incomplete multibyte or wide character")) +#endif +#ifdef EBADMSG +_S(ERR_MAP(EBADMSG), N_("Bad message")) +#endif +#ifdef EIDRM +_S(ERR_MAP(EIDRM), N_("Identifier removed")) +#endif +#ifdef EMULTIHOP +_S(ERR_MAP(EMULTIHOP), N_("Multihop attempted")) +#endif +#ifdef ENODATA +_S(ERR_MAP(ENODATA), N_("No data available")) +#endif +#ifdef ENOLINK +_S(ERR_MAP(ENOLINK), N_("Link has been severed")) +#endif +#ifdef ENOMSG +_S(ERR_MAP(ENOMSG), N_("No message of desired type")) +#endif +#ifdef ENOSR +_S(ERR_MAP(ENOSR), N_("Out of streams resources")) +#endif +#ifdef ENOSTR +_S(ERR_MAP(ENOSTR), N_("Device not a stream")) +#endif +#ifdef EOVERFLOW +_S(ERR_MAP(EOVERFLOW), N_("Value too large for defined data type")) +#endif +#ifdef EPROTO +_S(ERR_MAP(EPROTO), N_("Protocol error")) +#endif +#ifdef ETIME +_S(ERR_MAP(ETIME), N_("Timer expired")) +#endif +#ifdef ECANCELED +/* +TRANS An asynchronous operation was canceled before it +TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, +TRANS the normal result is for the operations affected to complete with this +TRANS error; @pxref{Cancel AIO Operations}. */ +_S(ERR_MAP(ECANCELED), N_("Operation canceled")) +#endif +#ifdef EOWNERDEAD +_S(ERR_MAP(EOWNERDEAD), N_("Owner died")) +#endif +#ifdef ENOTRECOVERABLE +_S(ERR_MAP(ENOTRECOVERABLE), N_("State not recoverable")) +#endif +#ifdef ERESTART +_S(ERR_MAP(ERESTART), N_("Interrupted system call should be restarted")) +#endif +#ifdef ECHRNG +_S(ERR_MAP(ECHRNG), N_("Channel number out of range")) +#endif +#ifdef EL2NSYNC +_S(ERR_MAP(EL2NSYNC), N_("Level 2 not synchronized")) +#endif +#ifdef EL3HLT +_S(ERR_MAP(EL3HLT), N_("Level 3 halted")) +#endif +#ifdef EL3RST +_S(ERR_MAP(EL3RST), N_("Level 3 reset")) +#endif +#ifdef ELNRNG +_S(ERR_MAP(ELNRNG), N_("Link number out of range")) +#endif +#ifdef EUNATCH +_S(ERR_MAP(EUNATCH), N_("Protocol driver not attached")) +#endif +#ifdef ENOCSI +_S(ERR_MAP(ENOCSI), N_("No CSI structure available")) +#endif +#ifdef EL2HLT +_S(ERR_MAP(EL2HLT), N_("Level 2 halted")) +#endif +#ifdef EBADE +_S(ERR_MAP(EBADE), N_("Invalid exchange")) +#endif +#ifdef EBADR +_S(ERR_MAP(EBADR), N_("Invalid request descriptor")) +#endif +#ifdef EXFULL +_S(ERR_MAP(EXFULL), N_("Exchange full")) +#endif +#ifdef ENOANO +_S(ERR_MAP(ENOANO), N_("No anode")) +#endif +#ifdef EBADRQC +_S(ERR_MAP(EBADRQC), N_("Invalid request code")) +#endif +#ifdef EBADSLT +_S(ERR_MAP(EBADSLT), N_("Invalid slot")) +#endif +#ifdef EBFONT +_S(ERR_MAP(EBFONT), N_("Bad font file format")) +#endif +#ifdef ENONET +_S(ERR_MAP(ENONET), N_("Machine is not on the network")) +#endif +#ifdef ENOPKG +_S(ERR_MAP(ENOPKG), N_("Package not installed")) +#endif +#ifdef EADV +_S(ERR_MAP(EADV), N_("Advertise error")) +#endif +#ifdef ESRMNT +_S(ERR_MAP(ESRMNT), N_("Srmount error")) +#endif +#ifdef ECOMM +_S(ERR_MAP(ECOMM), N_("Communication error on send")) +#endif +#ifdef EDOTDOT +_S(ERR_MAP(EDOTDOT), N_("RFS specific error")) +#endif +#ifdef ENOTUNIQ +_S(ERR_MAP(ENOTUNIQ), N_("Name not unique on network")) +#endif +#ifdef EBADFD +_S(ERR_MAP(EBADFD), N_("File descriptor in bad state")) +#endif +#ifdef EREMCHG +_S(ERR_MAP(EREMCHG), N_("Remote address changed")) +#endif +#ifdef ELIBACC +_S(ERR_MAP(ELIBACC), N_("Can not access a needed shared library")) +#endif +#ifdef ELIBBAD +_S(ERR_MAP(ELIBBAD), N_("Accessing a corrupted shared library")) +#endif +#ifdef ELIBSCN +_S(ERR_MAP(ELIBSCN), N_(".lib section in a.out corrupted")) +#endif +#ifdef ELIBMAX +_S(ERR_MAP(ELIBMAX), N_("Attempting to link in too many shared libraries")) +#endif +#ifdef ELIBEXEC +_S(ERR_MAP(ELIBEXEC), N_("Cannot exec a shared library directly")) +#endif +#ifdef ESTRPIPE +_S(ERR_MAP(ESTRPIPE), N_("Streams pipe error")) +#endif +#ifdef EUCLEAN +_S(ERR_MAP(EUCLEAN), N_("Structure needs cleaning")) +#endif +#ifdef ENOTNAM +_S(ERR_MAP(ENOTNAM), N_("Not a XENIX named type file")) +#endif +#ifdef ENAVAIL +_S(ERR_MAP(ENAVAIL), N_("No XENIX semaphores available")) +#endif +#ifdef EISNAM +_S(ERR_MAP(EISNAM), N_("Is a named type file")) +#endif +#ifdef EREMOTEIO +_S(ERR_MAP(EREMOTEIO), N_("Remote I/O error")) +#endif +#ifdef ENOMEDIUM +_S(ERR_MAP(ENOMEDIUM), N_("No medium found")) +#endif +#ifdef EMEDIUMTYPE +_S(ERR_MAP(EMEDIUMTYPE), N_("Wrong medium type")) +#endif +#ifdef ENOKEY +_S(ERR_MAP(ENOKEY), N_("Required key not available")) +#endif +#ifdef EKEYEXPIRED +_S(ERR_MAP(EKEYEXPIRED), N_("Key has expired")) +#endif +#ifdef EKEYREVOKED +_S(ERR_MAP(EKEYREVOKED), N_("Key has been revoked")) +#endif +#ifdef EKEYREJECTED +_S(ERR_MAP(EKEYREJECTED), N_("Key was rejected by service")) +#endif +#ifdef ERFKILL +_S(ERR_MAP(ERFKILL), N_("Operation not possible due to RF-kill")) +#endif +#ifdef EHWPOISON +_S(ERR_MAP(EHWPOISON), N_("Memory page has hardware error")) +#endif +#ifdef EBADRPC +_S(ERR_MAP(EBADRPC), N_("RPC struct is bad")) +#endif +#ifdef EFTYPE +/* +TRANS The file was the wrong type for the +TRANS operation, or a data file had the wrong format. +TRANS +TRANS On some systems @code{chmod} returns this error if you try to set the +TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. */ +_S(ERR_MAP(EFTYPE), N_("Inappropriate file type or format")) +#endif +#ifdef EPROCUNAVAIL +_S(ERR_MAP(EPROCUNAVAIL), N_("RPC bad procedure for program")) +#endif +#ifdef EAUTH +_S(ERR_MAP(EAUTH), N_("Authentication error")) +#endif +#ifdef EDIED +/* +TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is +TRANS translated by a program and the translator program dies while starting +TRANS up, before it has connected to the file. */ +_S(ERR_MAP(EDIED), N_("Translator died")) +#endif +#ifdef ERPCMISMATCH +_S(ERR_MAP(ERPCMISMATCH), N_("RPC version wrong")) +#endif +#ifdef EGREGIOUS +/* +TRANS You did @strong{what}? */ +_S(ERR_MAP(EGREGIOUS), N_("You really blew it this time")) +#endif +#ifdef EPROCLIM +/* +TRANS This means that the per-user limit on new process would be exceeded by +TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on +TRANS the @code{RLIMIT_NPROC} limit. */ +_S(ERR_MAP(EPROCLIM), N_("Too many processes")) +#endif +#ifdef EGRATUITOUS +/* +TRANS This error code has no purpose. */ +_S(ERR_MAP(EGRATUITOUS), N_("Gratuitous error")) +#endif +#if defined (ENOTSUP) && ENOTSUP != EOPNOTSUPP +/* +TRANS A function returns this error when certain parameter +TRANS values are valid, but the functionality they request is not available. +TRANS This can mean that the function does not implement a particular command +TRANS or option value or flag bit at all. For functions that operate on some +TRANS object given in a parameter, such as a file descriptor or a port, it +TRANS might instead mean that only @emph{that specific object} (file +TRANS descriptor, port, etc.) is unable to support the other parameters given; +TRANS different file descriptors might support different ranges of parameter +TRANS values. +TRANS +TRANS If the entire function is not available at all in the implementation, +TRANS it returns @code{ENOSYS} instead. */ +_S(ERR_MAP(ENOTSUP), N_("Not supported")) +#endif +#ifdef EPROGMISMATCH +_S(ERR_MAP(EPROGMISMATCH), N_("RPC program version wrong")) +#endif +#ifdef EBACKGROUND +/* +TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return +TRANS this error for certain operations when the caller is not in the +TRANS foreground process group of the terminal. Users do not usually see this +TRANS error because functions such as @code{read} and @code{write} translate +TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, +TRANS for information on process groups and these signals. */ +_S(ERR_MAP(EBACKGROUND), N_("Inappropriate operation for background process")) +#endif +#ifdef EIEIO +/* +TRANS Go home and have a glass of warm, dairy-fresh milk. +TRANS @c Okay. Since you are dying to know, I'll tell you. +TRANS @c This is a joke, obviously. There is a children's song which begins, +TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) +TRANS @c errno macro EIO, I think about that song. Probably most of my +TRANS @c compatriots who program on Unix do, too. One of them must have stayed +TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. +TRANS @c Whoever did it should be castigated, but it made me laugh. +TRANS @c --jtobey@channel1.com +TRANS @c +TRANS @c "bought the farm" means "died". -jtobey +TRANS @c +TRANS @c Translators, please do not translate this litteraly, translate it into +TRANS @c an idiomatic funny way of saying that the computer died. */ +_S(ERR_MAP(EIEIO), N_("Computer bought the farm")) +#endif +#if defined (EWOULDBLOCK) && EWOULDBLOCK != EAGAIN +/* +TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). +TRANS The values are always the same, on every operating system. +TRANS +TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a +TRANS separate error code. */ +_S(ERR_MAP(EWOULDBLOCK), N_("Operation would block")) +#endif +#ifdef ENEEDAUTH +_S(ERR_MAP(ENEEDAUTH), N_("Need authenticator")) +#endif +#ifdef ED +/* +TRANS The experienced user will know what is wrong. +TRANS @c This error code is a joke. Its perror text is part of the joke. +TRANS @c Don't change it. */ +_S(ERR_MAP(ED), N_("?")) +#endif +#ifdef EPROGUNAVAIL +_S(ERR_MAP(EPROGUNAVAIL), N_("RPC program not available")) +#endif |