diff options
Diffstat (limited to 'REORG.TODO/bits/termios.h')
| -rw-r--r-- | REORG.TODO/bits/termios.h | 343 |
1 files changed, 343 insertions, 0 deletions
diff --git a/REORG.TODO/bits/termios.h b/REORG.TODO/bits/termios.h new file mode 100644 index 0000000000..5487b514c6 --- /dev/null +++ b/REORG.TODO/bits/termios.h @@ -0,0 +1,343 @@ +/* termios type and macro definitions. 4.4 BSD/generic GNU version. + Copyright (C) 1993-2017 Free Software Foundation, Inc. + This file is part of the GNU C Library. + + The GNU C Library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + The GNU C Library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with the GNU C Library; if not, see + <http://www.gnu.org/licenses/>. */ + +#ifndef _TERMIOS_H +# error "Never include <bits/termios.h> directly; use <termios.h> instead." +#endif + +/* These macros are also defined in some <bits/ioctls.h> files (with + numerically identical values), but this serves to shut up cpp's + complaining. */ +#if defined __USE_MISC || defined __USE_XOPEN + +# ifdef NL0 +# undef NL0 +# endif +# ifdef NL1 +# undef NL1 +# endif +# ifdef TAB0 +# undef TAB0 +# endif +# ifdef TAB1 +# undef TAB1 +# endif +# ifdef TAB2 +# undef TAB2 +# endif +# ifdef CR0 +# undef CR0 +# endif +# ifdef CR1 +# undef CR1 +# endif +# ifdef CR2 +# undef CR2 +# endif +# ifdef CR3 +# undef CR3 +# endif +# ifdef FF0 +# undef FF0 +# endif +# ifdef FF1 +# undef FF1 +# endif +# ifdef BS0 +# undef BS0 +# endif +# ifdef BS1 +# undef BS1 +# endif + +#endif /* __USE_MISC || __USE_XOPEN */ + +#ifdef __USE_MISC + +# ifdef MDMBUF +# undef MDMBUF +# endif +# ifdef FLUSHO +# undef FLUSHO +# endif +# ifdef PENDIN +# undef PENDIN +# endif + +#endif /* __USE_MISC */ + +#ifdef ECHO +# undef ECHO +#endif +#ifdef TOSTOP +# undef TOSTOP +#endif +#ifdef NOFLSH +# undef NOFLSH +#endif + + +/* These definitions match those used by the 4.4 BSD kernel. + If the operating system has termios system calls or ioctls that + correctly implement the POSIX.1 behavior, there should be a + system-dependent version of this file that defines `struct termios', + `tcflag_t', `cc_t', `speed_t' and the `TC*' constants appropriately. */ + +/* Type of terminal control flag masks. */ +typedef unsigned long int tcflag_t; + +/* Type of control characters. */ +typedef unsigned char cc_t; + +/* Type of baud rate specifiers. */ +typedef long int speed_t; + +/* Terminal control structure. */ +struct termios +{ + /* Input modes. */ + tcflag_t c_iflag; +#define IGNBRK (1 << 0) /* Ignore break condition. */ +#define BRKINT (1 << 1) /* Signal interrupt on break. */ +#define IGNPAR (1 << 2) /* Ignore characters with parity errors. */ +#define PARMRK (1 << 3) /* Mark parity and framing errors. */ +#define INPCK (1 << 4) /* Enable input parity check. */ +#define ISTRIP (1 << 5) /* Strip 8th bit off characters. */ +#define INLCR (1 << 6) /* Map NL to CR on input. */ +#define IGNCR (1 << 7) /* Ignore CR. */ +#define ICRNL (1 << 8) /* Map CR to NL on input. */ +#define IXON (1 << 9) /* Enable start/stop output control. */ +#define IXOFF (1 << 10) /* Enable start/stop input control. */ +#if defined __USE_MISC || defined __USE_UNIX98 +# define IXANY (1 << 11) /* Any character will restart after stop. */ +#endif +#ifdef __USE_MISC +# define IMAXBEL (1 << 13) /* Ring bell when input queue is full. */ +#endif +#ifdef __USE_GNU +# define IUCLC (1 << 14) /* Translate upper case input to lower case. */ +#endif + + /* Output modes. */ + tcflag_t c_oflag; +#define OPOST (1 << 0) /* Perform output processing. */ +#if defined __USE_MISC || defined __USE_XOPEN +# define ONLCR (1 << 1) /* Map NL to CR-NL on output. */ +#endif +#ifdef __USE_MISC +# define OXTABS TAB3 /* Expand tabs to spaces. */ +# define ONOEOT (1 << 3) /* Discard EOT (^D) on output. */ +#endif +#if defined __USE_MISC || defined __USE_XOPEN +# define OCRNL (1 << 4) /* Map CR to NL. */ +# define ONOCR (1 << 5) /* Discard CR's when on column 0. */ +# define ONLRET (1 << 6) /* Move to column 0 on NL. */ +#endif +#if defined __USE_MISC || defined __USE_XOPEN +# define NLDLY (3 << 8) /* NL delay. */ +# define NL0 (0 << 8) /* NL type 0. */ +# define NL1 (1 << 8) /* NL type 1. */ +# define TABDLY (3 << 10 | 1 << 2) /* TAB delay. */ +# define TAB0 (0 << 10) /* TAB delay type 0. */ +# define TAB1 (1 << 10) /* TAB delay type 1. */ +# define TAB2 (2 << 10) /* TAB delay type 2. */ +# define TAB3 (1 << 2) /* Expand tabs to spaces. */ +# define CRDLY (3 << 12) /* CR delay. */ +# define CR0 (0 << 12) /* CR delay type 0. */ +# define CR1 (1 << 12) /* CR delay type 1. */ +# define CR2 (2 << 12) /* CR delay type 2. */ +# define CR3 (3 << 12) /* CR delay type 3. */ +# define FFDLY (1 << 14) /* FF delay. */ +# define FF0 (0 << 14) /* FF delay type 0. */ +# define FF1 (1 << 14) /* FF delay type 1. */ +# define BSDLY (1 << 15) /* BS delay. */ +# define BS0 (0 << 15) /* BS delay type 0. */ +# define BS1 (1 << 15) /* BS delay type 1. */ +# define VTDLY (1 << 16) /* VT delay. */ +# define VT0 (0 << 16) /* VT delay type 0. */ +# define VT1 (1 << 16) /* VT delay type 1. */ +#endif /* __USE_MISC || __USE_XOPEN */ +#ifdef __USE_GNU +# define OLCUC (1 << 17) /* Translate lower case output to upper case */ +#endif +#ifdef __USE_XOPEN +# define OFILL (1 << 18) /* Send fill characters for delays. */ +#endif + + /* Control modes. */ + tcflag_t c_cflag; +#ifdef __USE_MISC +# define CIGNORE (1 << 0) /* Ignore these control flags. */ +#endif +#define CSIZE (CS5|CS6|CS7|CS8) /* Number of bits per byte (mask). */ +#define CS5 0 /* 5 bits per byte. */ +#define CS6 (1 << 8) /* 6 bits per byte. */ +#define CS7 (1 << 9) /* 7 bits per byte. */ +#define CS8 (CS6|CS7) /* 8 bits per byte. */ +#define CSTOPB (1 << 10) /* Two stop bits instead of one. */ +#define CREAD (1 << 11) /* Enable receiver. */ +#define PARENB (1 << 12) /* Parity enable. */ +#define PARODD (1 << 13) /* Odd parity instead of even. */ +#define HUPCL (1 << 14) /* Hang up on last close. */ +#define CLOCAL (1 << 15) /* Ignore modem status lines. */ +#ifdef __USE_MISC +# define CRTSCTS (1 << 16) /* RTS/CTS flow control. */ +# define CRTS_IFLOW CRTSCTS /* Compatibility. */ +# define CCTS_OFLOW CRTSCTS /* Compatibility. */ +# define CDTRCTS (1 << 17) /* DTR/CTS flow control. */ +# define MDMBUF (1 << 20) /* DTR/DCD flow control. */ +# define CHWFLOW (MDMBUF|CRTSCTS|CDTRCTS) /* All types of flow control. */ +#endif + + /* Local modes. */ + tcflag_t c_lflag; +#ifdef __USE_MISC +# define ECHOKE (1 << 0) /* Visual erase for KILL. */ +#endif +#define _ECHOE (1 << 1) /* Visual erase for ERASE. */ +#define ECHOE _ECHOE +#define _ECHOK (1 << 2) /* Echo NL after KILL. */ +#define ECHOK _ECHOK +#define _ECHO (1 << 3) /* Enable echo. */ +#define ECHO _ECHO +#define _ECHONL (1 << 4) /* Echo NL even if ECHO is off. */ +#define ECHONL _ECHONL +#ifdef __USE_MISC +# define ECHOPRT (1 << 5) /* Hardcopy visual erase. */ +# define ECHOCTL (1 << 6) /* Echo control characters as ^X. */ +#endif +#define _ISIG (1 << 7) /* Enable signals. */ +#define ISIG _ISIG +#define _ICANON (1 << 8) /* Do erase and kill processing. */ +#define ICANON _ICANON +#ifdef __USE_MISC +# define ALTWERASE (1 << 9) /* Alternate WERASE algorithm. */ +#endif +#define _IEXTEN (1 << 10) /* Enable DISCARD and LNEXT. */ +#define IEXTEN _IEXTEN +#ifdef __USE_MISC +# define EXTPROC (1 << 11) /* External processing. */ +#endif +#define _TOSTOP (1 << 22) /* Send SIGTTOU for background output. */ +#define TOSTOP _TOSTOP +#ifdef __USE_MISC +# define FLUSHO (1 << 23) /* Output being flushed (state). */ +# define NOKERNINFO (1 << 25) /* Disable VSTATUS. */ +# define PENDIN (1 << 29) /* Retype pending input (state). */ +#endif +#define _NOFLSH (1 << 31) /* Disable flush after interrupt. */ +#define NOFLSH _NOFLSH + + /* Control characters. */ +#define VEOF 0 /* End-of-file character [ICANON]. */ +#define VEOL 1 /* End-of-line character [ICANON]. */ +#ifdef __USE_MISC +# define VEOL2 2 /* Second EOL character [ICANON]. */ +#endif +#define VERASE 3 /* Erase character [ICANON]. */ +#ifdef __USE_MISC +# define VWERASE 4 /* Word-erase character [ICANON]. */ +#endif +#define VKILL 5 /* Kill-line character [ICANON]. */ +#ifdef __USE_MISC +# define VREPRINT 6 /* Reprint-line character [ICANON]. */ +#endif +#define VINTR 8 /* Interrupt character [ISIG]. */ +#define VQUIT 9 /* Quit character [ISIG]. */ +#define VSUSP 10 /* Suspend character [ISIG]. */ +#ifdef __USE_MISC +# define VDSUSP 11 /* Delayed suspend character [ISIG]. */ +#endif +#define VSTART 12 /* Start (X-ON) character [IXON, IXOFF]. */ +#define VSTOP 13 /* Stop (X-OFF) character [IXON, IXOFF]. */ +#ifdef __USE_MISC +# define VLNEXT 14 /* Literal-next character [IEXTEN]. */ +# define VDISCARD 15 /* Discard character [IEXTEN]. */ +#endif +#define VMIN 16 /* Minimum number of bytes read at once [!ICANON]. */ +#define VTIME 17 /* Time-out value (tenths of a second) [!ICANON]. */ +#ifdef __USE_MISC +# define VSTATUS 18 /* Status character [ICANON]. */ +#endif +#define NCCS 20 /* Value duplicated in <hurd/tioctl.defs>. */ + cc_t c_cc[NCCS]; + + /* Input and output baud rates. */ + speed_t __ispeed, __ospeed; +#define B0 0 /* Hang up. */ +#define B50 50 /* 50 baud. */ +#define B75 75 /* 75 baud. */ +#define B110 110 /* 110 baud. */ +#define B134 134 /* 134.5 baud. */ +#define B150 150 /* 150 baud. */ +#define B200 200 /* 200 baud. */ +#define B300 300 /* 300 baud. */ +#define B600 600 /* 600 baud. */ +#define B1200 1200 /* 1200 baud. */ +#define B1800 1800 /* 1800 baud. */ +#define B2400 2400 /* 2400 baud. */ +#define B4800 4800 /* 4800 baud. */ +#define B9600 9600 /* 9600 baud. */ +#define B7200 7200 /* 7200 baud. */ +#define B14400 14400 /* 14400 baud. */ +#define B19200 19200 /* 19200 baud. */ +#define B28800 28800 /* 28800 baud. */ +#define B38400 38400 /* 38400 baud. */ +#ifdef __USE_MISC +# define EXTA 19200 +# define EXTB 38400 +#endif +#define B57600 57600 +#define B76800 76800 +#define B115200 115200 +#define B230400 230400 +#define B460800 460800 +#define B500000 500000 +#define B576000 576000 +#define B921600 921600 +#define B1000000 1000000 +#define B1152000 1152000 +#define B1500000 1500000 +#define B2000000 2000000 +#define B2500000 2500000 +#define B3000000 3000000 +#define B3500000 3500000 +#define B4000000 4000000 +}; + +#define _IOT_termios /* Hurd ioctl type field. */ \ + _IOT (_IOTS (tcflag_t), 4, _IOTS (cc_t), NCCS, _IOTS (speed_t), 2) + +/* Values for the OPTIONAL_ACTIONS argument to `tcsetattr'. */ +#define TCSANOW 0 /* Change immediately. */ +#define TCSADRAIN 1 /* Change when pending output is written. */ +#define TCSAFLUSH 2 /* Flush pending input before changing. */ +#ifdef __USE_MISC +# define TCSASOFT 0x10 /* Flag: Don't alter hardware state. */ +#endif + +/* Values for the QUEUE_SELECTOR argument to `tcflush'. */ +#define TCIFLUSH 1 /* Discard data received but not yet read. */ +#define TCOFLUSH 2 /* Discard data written but not yet sent. */ +#define TCIOFLUSH 3 /* Discard all pending data. */ + +/* Values for the ACTION argument to `tcflow'. */ +#define TCOOFF 1 /* Suspend output. */ +#define TCOON 2 /* Restart suspended output. */ +#define TCIOFF 3 /* Send a STOP character. */ +#define TCION 4 /* Send a START character. */ |