sparc: remove ceil, floor, trunc sparc specific implementations

The ceil, floor and trunc functions on sparc do not fully follow the
standard and trigger an inexact exception when presented a value which
is not an integer. Since glibc 2.24 this causes a few tests to fail,
for instance:

  testing double (without inline functions)
  Failure: ceil (lit_pi): Exception "Inexact" set
  Failure: ceil (-lit_pi): Exception "Inexact" set
  Failure: ceil (min_subnorm_value): Exception "Inexact" set
  Failure: ceil (min_value): Exception "Inexact" set
  Failure: ceil (0.1): Exception "Inexact" set
  Failure: ceil (0.25): Exception "Inexact" set
  Failure: ceil (0.625): Exception "Inexact" set
  Failure: ceil (-min_subnorm_value): Exception "Inexact" set
  Failure: ceil (-min_value): Exception "Inexact" set
  Failure: ceil (-0.1): Exception "Inexact" set
  Failure: ceil (-0.25): Exception "Inexact" set
  Failure: ceil (-0.625): Exception "Inexact" set

I tried to fix that by using the same strategy than used on other
architectures, that is by saving the FSR register at the beginning
and restoring it at the end of the function. When doing so I noticed
a comment that this operation might be very costly, so I decided to
do some benchmarks.

The benchmarks below represent the time required to run each of the
function 60 millions of times with different input value. I have done
that in the basic V9 code, the VIS2 code, and using the default C
implementation of the libc, for both sparc32 and sparc64, on a Niagara
T1 based machine and an UltraSparc IIIi. Given I don't have access to a
more recent machine), I haven't been able to test the VIS3 version. Also
it should be noted that it doesn't make sense to do this benchmark for
V8 or earlier as in that case we use the default C implementation. The
results are available in the table below, the "+ fix" version correspond
to the one saving and restoring the FSR.

  Niagara T1 / sparc32
  --------------------
              ceilf    ceil     floorf   floor    truncf   trunc
  V9          19.10    22.48    19.10    22.48    16.59    19.27
  V9 + fix    19.77    23.34    19.77    23.33    17.27    20.12
  VIS2        16.87    19.62    16.87    19.62
  VIS2 + fix  17.55    20.47    17.55    20.47
  C impl      11.39    13.80    11.40    13.80    10.88    10.84

  Niagara T1 / sparc64
  --------------------
              ceilf    ceil     floorf   floor    truncf   trunc
  V9          18.14    22.23    18.14    22.23    15.64    19.02
  V9 + fix    18.82    23.08    18.82    23.08    16.32    19.87
  VIS2        15.92    19.37    15.92    19.37
  VIS2 + fix  16.59    20.22    16.59    20.22
  C impl      11.39    13.60    11.39    15.36    10.88    12.65

  UltraSparc IIIi / sparc32
  -------------------------
              ceilf    ceil     floorf   floor    truncf   trunc
  V9           4.81     7.09     6.61    11.64     4.91     7.05
  V9 + fix     7.20    10.42     7.14    10.54     6.76     9.47
  VIS2         4.81     7.03     4.76     7.13
  VIS2 + fix   6.76     9.51     6.71     9.63
  C impl       3.88     8.62     3.90     9.45     3.57     6.62

  UltraSparc IIIi / sparc64
  -------------------------
              ceilf    ceil     floorf   floor    truncf   trunc
  V9           3.48     4.39     3.48     4.41     3.01     3.85
  V9 + fix     4.76     5.90     4.76     5.90     4.86     6.26
  VIS2         2.95     3.61     2.95     3.61
  VIS2 + fix   4.24     5.37     4.30     7.97
  C impl       3.63     4.89     3.62     6.38     3.33     4.03

The first thing that should be noted is that the C implementation is
always faster on the Niagara T1 based machine. On the UltraSparc IIIi
the float version on sparc32 is also faster.

Coming back about the fix saving and restoring the FSR, it appears
it has a big impact as expected. In that case the C implementation is
always faster than the fixed implementations.

This patch therefore removes the sparc specific implementations in
favor of the generic ones.

Changelog:
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/Makefile
	[$(subdir) = math] (libm-sysdep_routines): Remove.
	[$(subdir) = math && $(have-as-vis3) = yes] (libm-sysdep_routines):
	Remove s_ceilf-vis3, s_ceil-vis3, s_floorf-vis3, s_floor-vis3,
	s_truncf-vis3, s_trunc-vis3.
	* sysdeps/sparc/sparc64/fpu/multiarch/Makefile: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis2.S: Delete
	file.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil-vis3.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceil.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis2.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf-vis3.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_ceilf.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis2.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor-vis3.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floor.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis2.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf-vis3.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_floorf.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc-vis3.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_trunc.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf-vis3.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/multiarch/s_truncf.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceil.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/s_ceilf.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/s_floor.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/s_floorf.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/s_trunc.S: Likewise.
	* sysdeps/sparc/sparc32/sparcv9/fpu/s_truncf.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis2.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil-vis3.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceil.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis2.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf-vis3.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_ceilf.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis2.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floor-vis3.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floor.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis2.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf-vis3.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_floorf.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc-vis3.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_trunc.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf-vis3.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/multiarch/s_truncf.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/s_ceil.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/s_ceilf.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/s_floor.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/s_floorf.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/s_trunc.S: Likewise.
	* sysdeps/sparc/sparc64/fpu/s_truncf.S: Likewise.

1 files changed, 0 insertions, 54 deletions

diff --git a/sysdeps/sparc/sparc64/fpu/s_truncf.S b/sysdeps/sparc/sparc64/fpu/s_truncf.S
deleted file mode 100644
index 7bc7235bec..0000000000
--- a/sysdeps/sparc/sparc64/fpu/s_truncf.S
+++ /dev/null
@@ -1,54 +0,0 @@
-/* Truncate argument to nearest integral value not larger than
-   the argument, sparc64 version.
-
-   Copyright (C) 2013-2016 Free Software Foundation, Inc.
-   This file is part of the GNU C Library.
-   Contributed by David S. Miller <davem@davemloft.net>, 2013.
-
-   The GNU C Library is free software; you can redistribute it and/or
-   modify it under the terms of the GNU Lesser General Public
-   License as published by the Free Software Foundation; either
-   version 2.1 of the License, or (at your option) any later version.
-
-   The GNU C Library is distributed in the hope that it will be useful,
-   but WITHOUT ANY WARRANTY; without even the implied warranty of
-   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-   Lesser General Public License for more details.
-
-   You should have received a copy of the GNU Lesser General Public
-   License along with the GNU C Library; if not, see
-   <http://www.gnu.org/licenses/>.  */
-
-#include <sysdep.h>
-
-	/* We pop constants into the FPU registers using the incoming
-	   argument stack slots, since this avoid having to use any PIC
-	   references.  We also thus avoid having to allocate a register
-	   window.
-
-	   VIS instructions are used to facilitate the formation of
-	   easier constants, and the propagation of the sign bit.  */
-
-#define TWO_TWENTYTHREE	0x4b000000		/* 2**23 */
-
-#define ZERO		%f10			/* 0.0 */
-#define SIGN_BIT	%f12			/* -0.0 */
-
-ENTRY (__truncf)
-	sethi	%hi(TWO_TWENTYTHREE), %o2
-	fzeros	ZERO
-	fnegs	ZERO, SIGN_BIT
-	st	%o2, [%sp + STACK_BIAS + 128]
-	fabss	%f1, %f14
-	ld	[%sp + STACK_BIAS + 128], %f16
-	fcmps	%fcc3, %f14, %f16
-	fmovsuge %fcc3, ZERO, %f14
-	fands	%f1, SIGN_BIT, SIGN_BIT
-	fstoi	%f14, %f14
-	fitos	%f14, %f14
-	fadds	%f1, ZERO, %f18
-	fmovsuge %fcc3, %f18, %f14
-	retl
-	 fors	%f14, SIGN_BIT, %f0
-END (__truncf)
-weak_alias (__truncf, truncf)