Updated to fedora-glibc-20061120T1000 cvs/fedora-glibc-2_5_90-7

16 files changed, 37 insertions, 37 deletions

diff --git a/manual/argp.texi b/manual/argp.texi
index 090d49f7a5..b37232306b 100644
--- a/manual/argp.texi
+++ b/manual/argp.texi
@@ -832,7 +832,7 @@ Don't exit on errors, although they may still result in error messages.
 @item ARGP_LONG_ONLY
 Use the gnu getopt `long-only' rules for parsing arguments.  This allows
 long-options to be recognized with only a single @samp{-}
-(i.e.  @samp{-help}).  This results in a less useful interface, and its
+(i.e., @samp{-help}).  This results in a less useful interface, and its
 use is discouraged as it conflicts with the way most GNU programs work
 as well as the GNU coding standards.
 
diff --git a/manual/charset.texi b/manual/charset.texi
index 5063246d61..8b2c09ca79 100644
--- a/manual/charset.texi
+++ b/manual/charset.texi
@@ -207,7 +207,7 @@ and transmittal.  Because each single wide character consists of more
 than one byte, they are effected by byte-ordering.  Thus, machines with
 different endianesses would see different values when accessing the same
 data.  This byte ordering concern also applies for communication protocols
-that are all byte-based and, thereforet require that the sender has to
+that are all byte-based and therefore require that the sender has to
 decide about splitting the wide character in bytes.  A last (but not least
 important) point is that wide characters often require more storage space
 than a customized byte-oriented character set.
@@ -737,7 +737,7 @@ the return value is @math{0}.  If the next @var{n} bytes form a valid
 multibyte character, the number of bytes belonging to this multibyte
 character byte sequence is returned.
 
-If the the first @var{n} bytes possibly form a valid multibyte
+If the first @var{n} bytes possibly form a valid multibyte
 character but the character is incomplete, the return value is
 @code{(size_t) -2}.  Otherwise the multibyte character sequence is invalid
 and the return value is @code{(size_t) -1}.
@@ -2231,7 +2231,7 @@ ordering of the processor (or at least the running process) is not the
 same as the one required for UCS-4.  This is done for performance reasons
 as one does not want to perform unnecessary byte-swapping operations if
 one is not interested in actually seeing the result in UCS-4.  To avoid
-trouble with endianess, the internal representation consistently is named
+trouble with endianness, the internal representation consistently is named
 @code{INTERNAL} even on big-endian systems where the representations are
 identical.
 
diff --git a/manual/errno.texi b/manual/errno.texi
index e230506427..dd9f861dc8 100644
--- a/manual/errno.texi
+++ b/manual/errno.texi
@@ -1434,7 +1434,7 @@ like those given to the @code{printf} family of functions.  The
 arguments required for the format can follow the @var{format} parameter.
 Just like @code{perror}, @code{error} also can report an error code in
 textual form.  But unlike @code{perror} the error value is explicitly
-passed to the function in the @var{errnum} parameter.  This elimintates
+passed to the function in the @var{errnum} parameter.  This eliminates
 the problem mentioned above that the error reporting function must be
 called immediately after the function causing the error since otherwise
 @code{errno} might have a different value.
@@ -1479,7 +1479,7 @@ in an input file (like a programming language source code file etc).
 
 If the global variable @code{error_one_per_line} is set to a non-zero
 value @code{error_at_line} will avoid printing consecutive messages for
-the same file anem line.  Repetition which are not directly following
+the same file and line.  Repetition which are not directly following
 each other are not caught.
 
 Just like @code{error} this function only returned if @var{status} is
diff --git a/manual/filesys.texi b/manual/filesys.texi
index 2436f22e88..9719d41946 100644
--- a/manual/filesys.texi
+++ b/manual/filesys.texi
@@ -131,7 +131,7 @@ this function is deprecated.
 @comment GNU
 @deftypefun {char *} get_current_dir_name (void)
 @vindex PWD
-This @code{get_current_dir_name} function is bascially equivalent to
+This @code{get_current_dir_name} function is basically equivalent to
 @w{@code{getcwd (NULL, 0)}}.  The only difference is that the value of
 the @code{PWD} variable is returned if this value is correct.  This is a
 subtle difference which is visible if the path described by the
@@ -917,7 +917,7 @@ function returns a value other than @math{0} this value is returned as
 the return value of @code{ftw}.
 
 When the sources are compiled with @code{_FILE_OFFSET_BITS == 64} on a
-32-bit system this function is in fact @code{ftw64}, i.e. the LFS
+32-bit system this function is in fact @code{ftw64}, i.e., the LFS
 interface transparently replaces the old interface.
 @end deftypefun
 
@@ -990,7 +990,7 @@ accordingly.  If the return value of a callback invocation was non-zero
 then that value is returned.
 
 When the sources are compiled with @code{_FILE_OFFSET_BITS == 64} on a
-32-bit system this function is in fact @code{nftw64}, i.e. the LFS
+32-bit system this function is in fact @code{nftw64}, i.e., the LFS
 interface transparently replaces the old interface.
 @end deftypefun
 
@@ -1434,7 +1434,7 @@ the existing directory named @var{newname} is deleted first.  The name
 
 One useful feature of @code{rename} is that the meaning of @var{newname}
 changes ``atomically'' from any previously existing file by that name to
-its new meaning (i.e. the file that was called @var{oldname}).  There is
+its new meaning (i.e., the file that was called @var{oldname}).  There is
 no instant at which @var{newname} is non-existent ``in between'' the old
 meaning and the new meaning.  If there is a system crash during the
 operation, it is possible for both names to still exist; but
@@ -3104,7 +3104,7 @@ terminates abnormally).
 This function is reentrant.
 
 When the sources are compiled with @code{_FILE_OFFSET_BITS == 64} on a
-32-bit system this function is in fact @code{tmpfile64}, i.e. the LFS
+32-bit system this function is in fact @code{tmpfile64}, i.e., the LFS
 interface transparently replaces the old interface.
 @end deftypefun
 
diff --git a/manual/lang.texi b/manual/lang.texi
index 96f6d9df55..82c5e962a0 100644
--- a/manual/lang.texi
+++ b/manual/lang.texi
@@ -1274,7 +1274,7 @@ type of a particular structure member.
 @comment ISO
 @deftypefn {Macro} size_t offsetof (@var{type}, @var{member})
 This expands to a integer constant expression that is the offset of the
-structure member named @var{member} in a the structure type @var{type}.
+structure member named @var{member} in the structure type @var{type}.
 For example, @code{offsetof (struct s, elem)} is the offset, in bytes,
 of the member @code{elem} in a @code{struct s}.
 
diff --git a/manual/maint.texi b/manual/maint.texi
index 2b9221233a..567db981a3 100644
--- a/manual/maint.texi
+++ b/manual/maint.texi
@@ -156,7 +156,7 @@ subdirectories under it intended to be new specific categories.
 to look for a system-dependent version of a file that's not in
 @file{generic}.  This means that any system-dependent source file must
 have an analogue in @file{generic}, even if the routines defined by that
-file are not implemented on other platforms.  Second. the @file{generic}
+file are not implemented on other platforms.  Second, the @file{generic}
 version of a system-dependent file is used if the makefiles do not find
 a version specific to the system you're compiling for.
 
diff --git a/manual/memory.texi b/manual/memory.texi
index 91b9d84eb2..cbe147b712 100644
--- a/manual/memory.texi
+++ b/manual/memory.texi
@@ -31,7 +31,7 @@ One of the most basic resources a process has available to it is memory.
 There are a lot of different ways systems organize memory, but in a
 typical one, each process has one linear virtual address space, with
 addresses running from zero to some huge maximum.  It need not be
-contiguous; i.e.  not all of these addresses actually can be used to
+contiguous; i.e., not all of these addresses actually can be used to
 store data.
 
 The virtual memory is divided into pages (4 kilobytes is typical).
@@ -1065,7 +1065,7 @@ This is the total size of memory occupied by free (not in use) chunks.
 
 @item int keepcost
 This is the size of the top-most releasable chunk that normally
-borders the end of the heap (i.e. the high end of the virtual address
+borders the end of the heap (i.e., the high end of the virtual address
 space's data segment).
 
 @end table
@@ -2407,7 +2407,7 @@ of the data segment is.
 @cindex paging
 
 You can tell the system to associate a particular virtual memory page
-with a real page frame and keep it that way --- i.e. cause the page to
+with a real page frame and keep it that way --- i.e., cause the page to
 be paged in if it isn't already and mark it so it will never be paged
 out and consequently will never cause a page fault.  This is called
 @dfn{locking} a page.
@@ -2467,7 +2467,7 @@ A memory lock is associated with a virtual page, not a real frame.  The
 paging rule is: If a frame backs at least one locked page, don't page it
 out.
 
-Memory locks do not stack.  I.e. you can't lock a particular page twice
+Memory locks do not stack.  I.e., you can't lock a particular page twice
 so that it has to be unlocked twice before it is truly unlocked.  It is
 either locked or it isn't.
 
diff --git a/manual/message.texi b/manual/message.texi
index 1507a6d04a..e772b2de1f 100644
--- a/manual/message.texi
+++ b/manual/message.texi
@@ -1810,8 +1810,8 @@ help to understand the input better.
 
 Other programs help to manage development cycle when new messages appear
 in the source files or when a new translation of the messages appear.
-here it should only be noted that using all the tools in GNU gettext it
-is possible to @emph{completely} automize the handling of message
+Here it should only be noted that using all the tools in GNU gettext it
+is possible to @emph{completely} automate the handling of message
 catalog.  Beside marking the translatable string in the source code and
 generating the translations the developers do not have anything to do
 themselves.
diff --git a/manual/resource.texi b/manual/resource.texi
index df77408e68..aabd28976a 100644
--- a/manual/resource.texi
+++ b/manual/resource.texi
@@ -584,7 +584,7 @@ to}, but doesn't @emph{need to} run occupies the CPU.
 @cindex preemptive scheduling
 When two processes are in contention to use the CPU at any instant, the
 one with the higher absolute priority always gets it.  This is true even if the
-process with the lower priority is already using the CPU (i.e. the
+process with the lower priority is already using the CPU (i.e., the
 scheduling is preemptive).  Of course, we're only talking about
 processes that are running or ``ready to run,'' which means they are
 ready to execute instructions right now.  When a process blocks to wait
@@ -819,7 +819,7 @@ existing policy is not @code{SCHED_OTHER}.
 
 @item
 The calling process does not have @code{CAP_SYS_NICE} permission and its
-owner is not the target process' owner.  I.e.  the effective uid of the
+owner is not the target process' owner.  I.e., the effective uid of the
 calling process is neither the effective nor the real uid of process
 @var{pid}.
 @c We need a cross reference to the capabilities section, when written.
@@ -1185,7 +1185,7 @@ The value of @var{class} is not valid.
 
 @item EPERM
 The call would set the nice value of a process which is owned by a different
-user than the calling process (i.e. the target process' real or effective
+user than the calling process (i.e., the target process' real or effective
 uid does not match the calling process' effective uid) and the calling
 process does not have @code{CAP_SYS_NICE} permission.
 
@@ -1215,7 +1215,7 @@ a process group ID (pgid).
 @comment sys/resource.h
 @comment BSD
 @item PRIO_USER
-All the processes owned by a particular user (i.e. whose real uid
+All the processes owned by a particular user (i.e., whose real uid
 indicates the user).  The argument @var{id} is a user ID (uid).
 @end vtable
 
@@ -1272,7 +1272,7 @@ other process or thread is allowed to use.
 @item
 The access to certain resources (RAM, I/O ports) has different costs
 from different CPUs.  This is the case in NUMA (Non-Uniform Memory
-Architecture) machines.  Preferrably memory should be accessed locally
+Architecture) machines.  Preferably memory should be accessed locally
 but this requirement is usually not visible to the scheduler.
 Therefore forcing a process or thread to the CPUs which have local
 access to the mostly used memory helps to significantly boost the
diff --git a/manual/search.texi b/manual/search.texi
index b98fca9b35..0afd0aecd0 100644
--- a/manual/search.texi
+++ b/manual/search.texi
@@ -368,9 +368,9 @@ necessary for the @code{struct hsearch_data} object can be allocated
 dynamically.  It must be initialized with zero before calling this
 function.
 
-The return value is non-zero if the operation were successful.  if the
-return value is zero something went wrong which probably means the
-programs runs out of memory.
+The return value is non-zero if the operation was successful.  If the
+return value is zero, something went wrong, which probably means the
+programs ran out of memory.
 @end deftypefun
 
 @comment search.h
diff --git a/manual/signal.texi b/manual/signal.texi
index cbf746639a..dfaaa88950 100644
--- a/manual/signal.texi
+++ b/manual/signal.texi
@@ -2567,7 +2567,7 @@ The prototype for the @code{sigprocmask} function is in @file{signal.h}.
 Note that you must not use @code{sigprocmask} in multi-threaded processes,
 because each thread has its own signal mask and there is no single process
 signal mask. According to POSIX, the behavior of @code{sigprocmask} in a
-multi-threaded process is ``unspeficied''.
+multi-threaded process is ``unspecified''.
 Instead, use @code{pthread_sigmask}.
 @ifset linuxthreads
 @xref{Threads and Signal Handling}.
diff --git a/manual/startup.texi b/manual/startup.texi
index 5ccb78b958..79c79683f7 100644
--- a/manual/startup.texi
+++ b/manual/startup.texi
@@ -830,7 +830,7 @@ mean that there was difficulty in opening the files.
 Don't confuse a program's exit status with a process' termination status.
 There are lots of ways a process can terminate besides having it's program
 finish.  In the event that the process termination @emph{is} caused by program
-termination (i.e. @code{exit}), though, the program's exit status becomes
+termination (i.e., @code{exit}), though, the program's exit status becomes
 part of the process' termination status.
 
 @node Cleanups on Exit
diff --git a/manual/stdio.texi b/manual/stdio.texi
index 977989d95e..30a6e6ebe0 100644
--- a/manual/stdio.texi
+++ b/manual/stdio.texi
@@ -433,7 +433,7 @@ see @ref{Stream Buffering}.
 @cindex multi-threaded application
 Streams can be used in multi-threaded applications in the same way they
 are used in single-threaded applications.  But the programmer must be
-aware of a the possible complications.  It is important to know about
+aware of the possible complications.  It is important to know about
 these also if the program one writes never use threads since the design
 and implementation of many stream functions is heavily influenced by the
 requirements added by multi-threaded programming.
@@ -1992,7 +1992,7 @@ the precision.  The exponent always contains at least two digits.  The
 The @samp{%g} and @samp{%G} conversions print the argument in the style
 of @samp{%e} or @samp{%E} (respectively) if the exponent would be less
 than -4 or greater than or equal to the precision; otherwise they use
-the @samp{%f} style.  A precision of @code{0}, is taken as 1. is
+the @samp{%f} style.  A precision of @code{0}, is taken as 1.
 Trailing zeros are removed from the fractional portion of the result and
 a decimal-point character appears only if it is followed by a digit.
 
diff --git a/manual/sysinfo.texi b/manual/sysinfo.texi
index 0a44830359..8f2dd451be 100644
--- a/manual/sysinfo.texi
+++ b/manual/sysinfo.texi
@@ -872,7 +872,7 @@ shall be accessible while the filesystem is mounted.
 
 @item MS_SYNCHRONOUS
 This bit on specifies that all writes to the filesystem while it is
-mounted shall be synchronous; i.e. data shall be synced before each
+mounted shall be synchronous; i.e., data shall be synced before each
 write completes rather than held in the buffer cache.
 
 @item MS_MANDLOCK
diff --git a/manual/syslog.texi b/manual/syslog.texi
index df4179e27a..3d7def83f7 100644
--- a/manual/syslog.texi
+++ b/manual/syslog.texi
@@ -370,7 +370,7 @@ The message is only for debugging purposes.
 
 Results are undefined if the priority code is anything else.
 
-If the process does not presently have a Syslog connection open (i.e.
+If the process does not presently have a Syslog connection open (i.e.,
 it did not call @code{openlog}), @code{syslog} implicitly opens the
 connection the same as @code{openlog} would, with the following defaults
 for information that would otherwise be included in an @code{openlog}
diff --git a/manual/time.texi b/manual/time.texi
index 9b87d3eed0..a3e8438bce 100644
--- a/manual/time.texi
+++ b/manual/time.texi
@@ -193,7 +193,7 @@ total amount of time a process has actively used a CPU since some
 arbitrary event.  On the GNU system, that event is the creation of the
 process.  While arbitrary in general, the event is always the same event
 for any particular process, so you can always measure how much time on
-the CPU a particular computation takes by examinining the process' CPU
+the CPU a particular computation takes by examining the process' CPU
 time before and after the computation.
 @cindex CPU time
 @cindex clock ticks
@@ -447,7 +447,7 @@ current calendar time is not available, the value
 @comment time.h
 @comment SVID, XPG
 @deftypefun int stime (time_t *@var{newtime})
-@code{stime} sets the system clock, i.e.  it tells the system that the
+@code{stime} sets the system clock, i.e., it tells the system that the
 current calendar time is @var{newtime}, where @code{newtime} is
 interpreted as described in the above definition of @code{time_t}.
 
@@ -1470,7 +1470,7 @@ widely available.
 @node Low-Level Time String Parsing
 @subsubsection Interpret string according to given format
 
-he first function is rather low-level.  It is nevertheless frequently
+The first function is rather low-level.  It is nevertheless frequently
 used in software since it is better known.  Its interface and
 implementation are heavily influenced by the @code{getdate} function,
 which is defined and implemented in terms of calls to @code{strptime}.
@@ -1790,7 +1790,7 @@ process.  If the input string contains more characters than required by
 the format string the return value points right after the last consumed
 input character.  If the whole input string is consumed the return value
 points to the @code{NULL} byte at the end of the string.  If an error
-occurs, i.e. @code{strptime} fails to match all of the format string,
+occurs, i.e., @code{strptime} fails to match all of the format string,
 the function returns @code{NULL}.
 @end deftypefun