Add pretty printers for the NPTL lock types

This patch adds pretty printers for the following NPTL types:

- pthread_mutex_t
- pthread_mutexattr_t
- pthread_cond_t
- pthread_condattr_t
- pthread_rwlock_t
- pthread_rwlockattr_t

To load the pretty printers into your gdb session, do the following:

python
import sys
sys.path.insert(0, '/path/to/glibc/build/nptl/pretty-printers')
end

source /path/to/glibc/source/pretty-printers/nptl-printers.py

You can check which printers are registered and enabled by issuing the
'info pretty-printer' gdb command. Printers should trigger automatically when
trying to print a variable of one of the types mentioned above.

The printers are architecture-independent, and were tested on an AMD64 running
Ubuntu 14.04 and an x86 VM running Fedora 24.

In order to work, the printers need to know the values of various flags that
are scattered throughout pthread.h and pthreadP.h as enums and #defines. Since
replicating these constants in the printers file itself would create a
maintenance burden, I wrote a script called gen-py-const.awk that Makerules uses
to extract the constants. This script is pretty much the same as gen-as-const.awk,
except it doesn't cast the constant values to 'long' and is thorougly documented.
The constants need only to be enumerated in a .pysym file, which is then referenced
by a Make variable called gen-py-const-headers.

As for the install directory, I discussed this with Mike Frysinger and Siddhesh
Poyarekar, and we agreed that it can be handled in a separate patch, and shouldn't
block merging of this one.

In addition, I've written a series of test cases for the pretty printers.
Each lock type (mutex, condvar and rwlock) has two test programs, one for itself
and other for its related 'attributes' object. Each test program in turn has a
PExpect-based Python script that drives gdb and compares its output to the
expected printer's. The tests run on the glibc host, which is assumed to have
both gdb and PExpect; if either is absent the tests will fail with code 77
(UNSUPPORTED). For cross-testing you should use cross-test-ssh.sh as test-wrapper.
I've tested the printers on both native builds and a cross build using a Beaglebone
Black running Debian, with the build system's filesystem shared with the board
through NFS.

Finally, I've written a README that explains all this and more.

	* INSTALL: Regenerated.
	* Makeconfig: Add comments and whitespace to make the control flow
	clearer.
	(+link-printers-tests, +link-pie-printers-tests, CFLAGS-printers-tests,
	installed-rtld-LDFLAGS, built-rtld-LDFLAGS, link-libc-rpath,
	link-libc-tests-after-rpath-link, link-libc-printers-tests): New.
	(rtld-LDFLAGS, rtld-tests-LDFLAGS, link-libc-tests-rpath-link,
	link-libc-tests): Use the new variables as required.
	* Makerules ($(py-const)): New rule.
	generated: Add $(py-const).
	* README.pretty-printers: New file.
	* Rules (tests-printers-programs, tests-printers-out, py-env): New.
	(others): Depend on $(py-const).
	(tests): Depend on $(tests-printers-programs) or $(tests-printers-out),
	as required.  Pass $(tests-printers) to merge-test-results.sh.
	* manual/install.texi: Add requirements for testing the pretty printers.
	* nptl/Makefile (gen-py-const-headers, pretty-printers, tests-printers,
	CFLAGS-test-mutexattr-printers.c CFLAGS-test-mutex-printers.c,
	CFLAGS-test-condattr-printers.c, CFLAGS-test-cond-printers.c,
	CFLAGS-test-rwlockattr-printers.c CFLAGS-test-rwlock-printers.c,
	tests-printers-libs): Define.
	* nptl/nptl-printers.py: New file.
	* nptl/nptl_lock_constants.pysym: Likewise.
	* nptl/test-cond-printers.c: Likewise.
	* nptl/test-cond-printers.py: Likewise.
	* nptl/test-condattr-printers.c: Likewise.
	* nptl/test-condattr-printers.py: Likewise.
	* nptl/test-mutex-printers.c: Likewise.
	* nptl/test-mutex-printers.py: Likewise.
	* nptl/test-mutexattr-printers.c: Likewise.
	* nptl/test-mutexattr-printers.py: Likewise.
	* nptl/test-rwlock-printers.c: Likewise.
	* nptl/test-rwlock-printers.py: Likewise.
	* nptl/test-rwlockattr-printers.c: Likewise.
	* nptl/test-rwlockattr-printers.py: Likewise.
	* scripts/gen-py-const.awk: Likewise.
	* scripts/test_printers_common.py: Likewise.
	* scripts/test_printers_exceptions.py: Likewise.

1 files changed, 30 insertions, 0 deletions

diff --git a/manual/install.texi b/manual/install.texi
index de1c2030d3..35e02ada58 100644
--- a/manual/install.texi
+++ b/manual/install.texi
@@ -256,6 +256,36 @@ occurred.  You can specify @samp{stop-on-test-failure=y} when running
 @code{make check} to make the test run stop and exit with an error
 status immediately when a failure occurs.
 
+The @glibcadj{} pretty printers come with their own set of scripts for testing,
+which run together with the rest of the testsuite through @code{make check}.
+These scripts require the following tools to run successfully:
+
+@itemize @bullet
+@item
+Python 2.7.6/3.4.3 or later
+
+Python is required for running the printers' test scripts.
+
+@item PExpect 4.0
+
+The printer tests drive GDB through test programs and compare its output
+to the printers'.  PExpect is used to capture the output of GDB, and should be
+compatible with the Python version in your system.
+
+@item
+GDB 7.8 or later with support for Python 2.7.6/3.4.3 or later
+
+GDB itself needs to be configured with Python support in order to use the
+pretty printers.  Notice that your system having Python available doesn't imply
+that GDB supports it, nor that your system's Python and GDB's have the same
+version.
+@end itemize
+
+@noindent
+If these tools are absent, the printer tests will report themselves as
+@code{UNSUPPORTED}.  Notice that some of the printer tests require @theglibc{}
+to be compiled with debugging symbols.
+
 To format the @cite{GNU C Library Reference Manual} for printing, type
 @w{@code{make dvi}}.  You need a working @TeX{} installation to do
 this.  The distribution builds the on-line formatted version of the