pstopnm

Updated: 28 May 2003
Table Of Contents  

NAME

pstopnm - convert a PostScript file to a PNM image  

SYNOPSIS

pstopnm [-stdout] [-forceplain] [-help] [-dpi=dpi] [-xsize=pixels] [-ysize=pixels] [-xborder=frac] [-yborder=frac] [-landscape] [-portrait] [-nocrop] [-pbm |-pgm |-ppm] [-llx=s] [-lly=s] [-urx=s] [-ury=s] [-verbose] [-xmax=pixels] [-ymax=pixels] psfile[.ps]

Minimum unique abbreviation of option is acceptable. You may use double hyphens instead of single hyphen to denote options. You may use white space in place of the equals sign to separate an option name from its value.  

DESCRIPTION

This program is part of Netpbm.

pstopnm reads a PostScript file as input and produces PBM, PGM, or PPM images as output. This program simply uses GhostScript to render a PostScript file with its PNM device drivers. If you don't have GhostScript installed or the version you have installed was not built with the relevant PNM device drivers, pstopnm will fail. You can see if you have the proper environment by issuing the command gs --help . If it responds and lists under "Available Devices" pbm, pbmraw, pgm, pgmraw, pnm, pnmraw, ppm, or ppmraw, you're in business.

pstopnm uses the value of the GHOSTSCRIPT environment variable as the file name for the Ghostscript program. If GHOSTSCRIPT is not set, pstopnm searches your PATH for a regular file named gs. If it doesn't find one, it assumes Ghostscript is in the file /usr/bin/gs.

pstopnm does not use the Netpbm libraries to generate the output files, so may not be entirely consistent with most Netpbm programs.

psfile[.ps] is the name of the input file. pstopnm will add the ps to the end of the name you specify if no file exists by the exact name you specify, but one with added does. Use - to indicate Standard Input.

If you use the -stdout option, pstopnm outputs images of all the pages as a multi-image file to Standard Output. Otherwise, pstopnm creates one file for each page in the Postscript document. The files are named as follows: If the input file is named psfile.ps, the name of the files will be psfile001.ppm, psfile002.ppm, etc. The filetype suffix is .ppm, .pgm, or .pbm, depending on which kind of output you choose with your invocation options. If the input file name does not end in .ps, the whole file name is used in the output file name. For example, if the input file is named psfile.old, the output file name is psfile.old001.ppm, etc.

Note that the output file selection is inconsistent with most Netpbm programs, because it does not default to Standard Output. This is for historical reasons, based on the fact that the Netpbm formats did not always provide for a sequence of images in a single file.

Each output image contains a rectangular area of the page to which it pertains. See the Dimensions section for details on what part of the input image goes into the output image and how big it is in the output and what borders and margins are in the output image.

It has been reported that on some Postscript Version 1 input, Ghostscript, and therefore pstopnm, produces no output. To solve this problem, you can convert the file to Postscript Version 3 with the program ps2ps. It is reported that the program pstops does not work.

Dimensions

This section describes what part of the input image gets used in the output and the dimensions of the output, including borders and background.

Note that an output image is associated with a single input page. pstopnm starts by taking a rectangular area from the input page. That is called the subject image.

pstopnm may add borders to the subject image to form what is called the bordered subject image.

pstopnm places the bordered subject image in the center of the output image and clips the edges as necessary to fit the computed output image size.

The location of the subject image in the Postscript input page is defined by four numbers, the lower left corner and the upper right corner x and y coordinates. These coordinates are usually specified by the BoundingBox DSC statement (a Postscript comment) in the PostScript file, but they can be overridden by the user by specifying one or more of the following options: -llx, -lly, -urx, and -ury.

The presence and thickness of a border to be added to the subject image to form the bordered subject image is controlled by the options -xborder and -yborder. If pstopnm does not find a BoundingBox statement in the input, and you don't specify image area coordinates on the command line, pstopnm uses default values. If your input is from Standard Input, pstopnm does not use the BoundingBox values (due to the technical difficulty of extracting that information and still feeding the file to Ghostscript), so you either have to specify the image area coordinates or take the default.

The output image size is a confusing thing. In a Postscript file, things have spatial dimensions. For example, a particular line may be 3 centimeters long. A Postscript printer is supposed to print the line 3 centimeters long, using however many pixels that takes, without regard to how big the sheet of paper on which it is printing is. In a PNM image, by contrast, there is no spatial dimension; there are only pixels. You might have a line that is 100 pixels long, but the PNM image says nothing about how long that line should be on a printed page.

pstopnm fills the role of a Postscript printer. The PNM image is a virtual printed page. pstopnm must determine how many pixels it will use in the output image to represent an inch of input image, which is the "output device resolution." Think of it as the number of dots per inch the virtual printer prints on the virtual page.

The simplest thing is for you to tell pstopnm exactly what output device resolution to use, using the -dpi option. If you say for example -dpi=300 and the bordered subject image is 2 inches by 2 inches, the PNM output will be 600 pixels by 600 pixels.

Or you can set the output image dimensions with -xsize and -ysize. For example, if you say -xsize=1000 -ysize=1000 and the bordered subject image is 2 inches by 2 inches, the output image is 1000 by 1000 pixels, with each pixel representing 1/500 inch of input image.

If you specify one of -xsize and -ysize and not the other, pstopnm defaults the other such that the output image has the same aspect ratio as the bordered subject image.

If you specify neither the output size nor the output device resolution, pstopnm does some weird computation which exists mainly for historical reasons:

If you specify -nocrop, pstopnm uses the values of -xmax and -ymax for the output image dimensions. These default to 612 and 792 pixels, respectively.

The final case, the default, is where you don't specify any size or resolution options of -nocrop. This is the most complicated case. In this case, pstopnm first chooses an output device resolution that would generate the number of pixels indicated by -xmax and -ymax from the bordered subject image. Then, based on that resolution, it chooses an output image size that is just large enough to accomodate the subject image (no borders). Remember (above) that pstopnm trims the edges of the bordered subject image to fit the computed output size.  

OPTIONS

-forceplain
forces the output file to be in plain (text) format. Otherwise, it is in raw (binary) format. See pbm, etc.
-llx=bx
selects bx as the lower left corner x coordinate (in inches) on the Postscript input page of the subject image. See the Dimensions section.
-lly=by
selects by as the lower left corner y coordinate (in inches) on the Postscript input page of the subject image. See the Dimensions section.
-landscape
renders the image in landscape orientation.
-portrait
renders the image in portrait orientation.
-nocrop
This option causes pstopnm to make the output image exactly the dimensions of the bordered subject image. By default, pstopnm makes the output image the dimensions specified by -xmax and -ymax. See the Dimensions section.
-pbm
-pgm
-ppm
selects the format of the output file. By default, all files are rendered as PPM.
-stdout
causes output to go to Standard Output instead of to regular files, one per page (see description of output files above). Use pnmsplit to extract individual pages from Standard Output.
-urx=tx
selects tx as the upper right corner x coordinate (in inches) on the Postscript input page of the subject image. See the Dimensions section.
-ury=ty
selects ty as the upper right corner y coordinate (in inches) on the Postscript input page of the subject image. See the Dimensions section.
-verbose
prints processing information to stdout.
-xborder=frac
specifies that the left and right borders added to the subject image are to be frac times the subject image width. The default value is 0.1. See the Dimensions section.
-xmax=xmax
specifies that the output image is to be xmax pixels wide. The default is 612. See the Dimensions section.
-xsize=xsize
specifies that the output image is to be xsize pixels wide. See the Dimensions section.
-yborder=frac
specifies that the top and bottom borders added to the subject image are to be frac times the subject image height. The default value is 0.1. See the Dimensions section.
-ymax=ymax
specifies that the output image is to be ymax pixels high. The default is 792. See the Dimensions section.
-ysize=ysize
specifies that the output image is to be ymax pixels high. See the Dimensions section.
-dpi=dpi
specifies the output device resolution, in dots per inch, of the Postscript printer that pstopnm simulates. This is the number of PNM pixels pstopnm generates for each inch of image. See the Dimensions section.

This option was new in Netpbm 10.21 (March 2004).

 

LIMITATIONS

The program will produce incorrect results with PostScript files that initialize the current transformation matrix. In these cases, page translation and rotation will not have any effect. To render these files, probably the best bet is to use the following options:

    pstopnm -xborder 0 -yborder 0 -portrait -nocrop file.ps

Additional options may be needed if the document is supposed to be rendered on a medium different from letter-size paper.  

SEE ALSO

gs, pnmtops, psidtopgm, pbmtolps, pbmtoepsi, pnmsplit, pstofits  

COPYRIGHT

Copyright (c) 1992 Smithsonian Astrophysical Observatory

PostScript is a Trademark of Adobe Systems Incorporated.  

AUTHOR

Alberto Accomazzi, WIPL, Center for Astrophysics.


 

Table Of Contents