From 62da479a0107841628618ed54181d09754ff4210 Mon Sep 17 00:00:00 2001 From: giraffedata Date: Fri, 20 Oct 2023 18:18:08 +0000 Subject: cleanup git-svn-id: http://svn.code.sf.net/p/netpbm/code/trunk@4767 9d0c8265-081b-0410-96cb-a4ca84ce46f8 --- converter/pbm/pbmtoppa/cutswath.c | 602 ++++++++++++++++++-------------------- 1 file changed, 291 insertions(+), 311 deletions(-) diff --git a/converter/pbm/pbmtoppa/cutswath.c b/converter/pbm/pbmtoppa/cutswath.c index cd94e1ea..bc7139b9 100644 --- a/converter/pbm/pbmtoppa/cutswath.c +++ b/converter/pbm/pbmtoppa/cutswath.c @@ -12,6 +12,9 @@ #include #include +#include "mallocvar.h" +#include "pm.h" + #include "ppa.h" #include "ppapbm.h" #include "cutswath.h" @@ -20,343 +23,320 @@ extern int Width; extern int Height; extern int Pwidth; -/* sweep_data->direction must be set already */ -/* Upon successful completion, sweep_data->image_data and - sweep_data->nozzle_data have been set to pointers which this routine - malloc()'d. */ -/* Upon successful completion, all members of *sweep_data have been set - except direction, vertical_pos, and next. */ -/* Returns: 0 if unsuccessful - 1 if successful, but with non-printing result (end of page) - 2 if successful, with printing result */ + + int -cut_pbm_swath(pbm_stat* pbm,ppa_stat* prn,int maxlines,ppa_sweep_data* sweep_data) -{ - unsigned char *data, *ppa, *place, *maxplace; - int p_width, width8, p_width8; - int i, j, left, right, got_nonblank, numlines; - int horzpos, hp2; - int shift; - ppa_nozzle_data nozzles[2]; - - ppa = NULL; - - /* shift = 6 if DPI==300 */ - /* shift = 12 if DPI==600 */ - shift = ( prn->DPI == 300 ? 6:12 ) ; - - /* safeguard against the user freeing these */ - sweep_data->image_data = NULL; - sweep_data->nozzle_data = NULL; - - /* read the data from the input file */ - width8 = (pbm->width + 7) / 8; - -/* - fprintf(stderr,"cutswath(): width=%u\n",pbm->width); - fprintf(stderr,"cutswath(): height=%u\n",pbm->height); -*/ - - if ((data=malloc(width8*maxlines)) == NULL) - { - fprintf(stderr,"cutswath(): could not malloc data storage\n"); - return 0; - } - - /* ignore lines that are above the upper margin */ - while(pbm->current_line < prn->top_margin) - if(!pbm_readline(pbm,data)) - { - fprintf(stderr,"cutswath(): A-could not read top margin\n"); - free (data); data=NULL; - return 0; - } +cut_pbm_swath(pbm_stat * const pbmP, + ppa_stat * const prnP, + int const maxlines, + ppa_sweep_data * const sweepDataP) { +/*---------------------------------------------------------------------------- + sweepDataP->direction must be set already + + Upon successful completion, sweepDataP->image_data and + sweepDataP->nozzle_data have been set to pointers which this routine + malloc()'d. + + Upon successful completion, all members of *sweepDataP have been set + except direction, vertical_pos, and next. + + Returns: 0 if unsuccessful + 1 if successful, but with non-printing result (end of page) + 2 if successful, with printing result +-----------------------------------------------------------------------------*/ + int const shift = prnP->DPI == 300 ? 6 : /* DPI=600 */ 12; + + unsigned char *data, *ppa, *place, *maxplace; + int pWidth, width8, pWidth8; + int i, left, right, gotNonblank, numlines; + int horzpos, hp2; + ppa_nozzle_data nozzles[2]; + + ppa = NULL; + + /* Safeguard against the user freeing these */ + sweepDataP->image_data = NULL; + sweepDataP->nozzle_data = NULL; - /* eat all lines that are below the lower margin */ - if(pbm->current_line >= Height - prn->bottom_margin) - { - while(pbm->current_line < pbm->height) - if(!pbm_readline(pbm,data)) - { - fprintf(stderr,"cutswath(): could not clear bottom margin\n"); - free (data); data=NULL; + /* Read the data from the input file */ + width8 = (pbmP->width + 7) / 8; + + MALLOCARRAY(data, width8 * maxlines); + if (!data) { + pm_message("could not malloc data storage"); return 0; - } - free (data); data=NULL; - return 1; - } - - left = Pwidth-prn->right_margin/8; - right = prn->left_margin/8; - - /* eat all beginning blank lines and then up to maxlines or lower margin */ - got_nonblank=numlines=0; - while( (pbm->current_line < Height-prn->bottom_margin) && - (numlines < maxlines) ) - { - if(!pbm_readline(pbm,data+width8*numlines)) - { - fprintf(stderr,"cutswath(): B-could not read next line\n"); - free (data); data=NULL; - return 0; } - if(!got_nonblank) - for(j=prn->left_margin/8; jcurrent_line < prnP->top_margin) { + if (!pbm_readline(pbmP, data)) { + pm_message("could not read top margin"); + free(data); data=NULL; + return 0; } - if(got_nonblank) - { - int newleft = left, newright = right; - - /* find left-most nonblank */ - for (i = prn->left_margin/8; i < left; i++) - if (data[width8*numlines+i]) - { - newleft = i; - break; - } - /* find right-most nonblank */ - for (i = Pwidth-prn->right_margin/8-1; i >= right; i--) - if (data[width8*numlines+i]) - { - newright = i; - break; + } + + /* Eat all lines that are below the lower margin */ + if (pbmP->current_line >= Height - prnP->bottom_margin) { + while (pbmP->current_line < pbmP->height) { + if (!pbm_readline(pbmP, data)) { + pm_message("could not clear bottom margin"); + free(data); data=NULL; + return 0; } - numlines++; + } + free(data); data=NULL; + return 1; + } - if (newright < newleft) - { - fprintf (stderr, "Ack! newleft=%d, newright=%d, left=%d, right=%d\n", - newleft, newright, left, right); - free (data); data=NULL; + left = Pwidth - prnP->right_margin / 8; + right = prnP->left_margin / 8; + + /* Eat all beginning blank lines and then up to maxlines or lower margin */ + gotNonblank = numlines = 0; + while ((pbmP->current_line < Height-prnP->bottom_margin) && + (numlines < maxlines)) { + if (!pbm_readline(pbmP, data + width8 * numlines)) { + pm_message("could not read next line"); + free(data); data=NULL; return 0; - } - - /* if the next line might push us over the buffer size, stop here! */ - /* ignore this test for the 720 right now. Will add better */ - /* size-guessing for compressed data in the near future! */ - if (numlines % 2 == 1 && prn->version != HP720) - { - int l = newleft, r = newright, w; - - l--; - r+=2; - l*=8; - r*=8; - w = r-l; - w = (w+7)/8; - - if ((w+2*shift)*numlines > prn->bufsize) - { - numlines--; - pbm_unreadline (pbm, data+width8*numlines); - break; + } + if (!gotNonblank) { + unsigned int j; + for (j = prnP->left_margin / 8; j < left; ++j) { + if (data[j]) { + left = j; + gotNonblank=1; + break; + } + } + } + if (gotNonblank) { + int newleft, newright; + unsigned int i; + + /* Find left-most nonblank */ + for (i = prnP->left_margin / 8, newleft = left; i < left; ++i) { + if (data[width8 * numlines + i]) { + newleft = i; + break; + } + } + /* Find right-most nonblank */ + for (i = Pwidth - prnP->right_margin / 8 - 1, newright = right; + i >= right; + --i) { + if (data[width8 * numlines + i]) { + newright = i; + break; } - else - { - left = newleft; + } + ++numlines; + + if (newright < newleft) { + pm_message("Ack! newleft=%d, newright=%d, left=%d, right=%d", + newleft, newright, left, right); + free(data); data=NULL; + return 0; + } + + /* If the next line might push us over the buffer size, stop here! + ignore this test for the 720 right now. Will add better + size-guessing for compressed data in the near future! + */ + if (numlines % 2 == 1 && prnP->version != HP720) { + int l = newleft; + int r = newright; + int w; + + --l; + r += 2; + l *= 8; + r *= 8; + w = r-l; + w = (w + 7) / 8; + + if ((w + 2 * shift) * numlines > prnP->bufsize) { + --numlines; + pbm_unreadline(pbmP, data + width8 * numlines); + break; + } else { + left = newleft; + right = newright; + } + } else { + left = newleft; right = newright; - } - } - else - { - left = newleft; - right = newright; - } - } - } - - if(!got_nonblank) - { - /* eat all lines that are below the lower margin */ - if(pbm->current_line >= Height - prn->bottom_margin) - { - while(pbm->current_line < pbm->height) - if(!pbm_readline(pbm,data)) - { - fprintf(stderr,"cutswath(): could not clear bottom margin\n"); - free (data); data=NULL; - return 0; + } + } + } + + if (!gotNonblank) { + /* Eat all lines that are below the lower margin */ + if (pbmP->current_line >= Height - prnP->bottom_margin) { + while (pbmP->current_line < pbmP->height) { + if (!pbm_readline(pbmP, data)) { + pm_message("could not clear bottom margin"); + free(data); data = NULL; + return 0; + } + } + free(data); data = NULL; + return 1; } - free (data); data=NULL; - return 1; + free(data); data = NULL; + return 0; /* error, since didn't get to lower margin, yet blank */ } - free (data); data=NULL; - return 0; /* error, since didn't get to lower margin, yet blank */ - } - - /* make sure numlines is even and >= 2 (b/c we have to pass the printer - HALF of the number of pins used */ - if (numlines == 1) - { - /* there's no way that we only have 1 line and not enough memory, so - we're safe to increase numlines here. Also, the bottom margin should - be > 0 so we have some lines to read */ - if(!pbm_readline(pbm,data+width8*numlines)) - { - fprintf(stderr,"cutswath(): C-could not read next line\n"); - free (data); data=NULL; - return 0; + + /* Make sure numlines is even and >= 2 (b/c we have to pass the printer + HALF of the number of pins used + */ + if (numlines == 1) { + /* There's no way that we only have 1 line and not enough memory, so + we're safe to increase numlines here. Also, the bottom margin + should be > 0 so we have some lines to read + */ + if (!pbm_readline(pbmP, data + width8 * numlines)) { + pm_message("could not read next line"); + free(data); data = NULL; + return 0; } - numlines++; + ++numlines; } - if (numlines % 2 == 1) - { - /* decrease instead of increasing so we don't max out the buffer */ - numlines--; - pbm_unreadline (pbm, data+width8*numlines); + if (numlines % 2 == 1) { + /* Decrease instead of increasing so we don't max out the buffer */ + --numlines; + pbm_unreadline(pbmP, data + width8 * numlines); } - /* calculate vertical position */ - sweep_data->vertical_pos = pbm->current_line; + sweepDataP->vertical_pos = pbmP->current_line; - /* change sweep params */ - left--; - right+=2; - left *= 8; - right *= 8; + /* Change sweep params */ + left -= 1; + right += 2; + left *= 8; + right *= 8; - /* construct the sweep data */ - p_width = right - left; - p_width8 = (p_width + 7) / 8; + /* Construct the sweep data */ + pWidth = right - left; + pWidth8 = (pWidth + 7) / 8; - if ((ppa = malloc ((p_width8+2*shift) * numlines)) == NULL) - { - fprintf(stderr,"cutswath(): could not malloc ppa storage\n"); - free (data); data=NULL; - return 0; + MALLOCARRAY(ppa, (pWidth8 + 2 * shift) * numlines); + if (!ppa) { + pm_message("could not malloc ppa storage"); + free(data); data = NULL; + return 0; } - place = ppa; - - /* place 0's in the first 12 columns */ - memset (place, 0, numlines/2 * shift); - place += numlines/2 * shift; - - - if(sweep_data->direction == right_to_left) /* right-to-left */ - { - for (i = p_width8+shift-1; i >= 0; i--) - { - if (i >= shift) - { - for (j = 0; j < numlines/2; j++) - *place++ = data[j*2*width8 + i + left/8-shift]; - } - else - { - memset (place, 0, numlines/2); - place += numlines/2; - } - - if (i < p_width8) - { - for (j = 0; j < numlines/2; j++) - *place++ = data[(j*2+1)*width8 + i + left/8]; - } - else - { - memset (place, 0, numlines/2); - place += numlines/2; - } - } - } - else /* sweep_data->direction == left_to_right */ - { - for (i = 0; i < p_width8+shift; i++) - { - if (i < p_width8) - { - for (j = 0; j < numlines/2; j++) - *place++ = data[(j*2+1)*width8 + i + left/8]; - } - else - { - memset (place, 0, numlines/2); - place += numlines/2; - } - - if (i >= shift) - { - for (j = 0; j < numlines/2; j++) - *place++ = data[j*2*width8 + i + left/8 - shift]; - } - else - { - memset (place, 0, numlines/2); - place += numlines/2; - } - } - } - - /* done with data */ - free (data); data=NULL; - - /* place 0's in the last 12 columns */ - memset (place, 0, numlines/2 * shift); - place += numlines/2 * shift; - maxplace = place; - - /* create sweep data */ - sweep_data->image_data = ppa; - sweep_data->data_size = maxplace-ppa; - sweep_data->in_color = False; - - /* - horzpos = left*600/prn->DPI + (sweep_data->direction==left_to_right ? 0*600/prn->DPI : 0); - */ - horzpos = left * 600/prn->DPI; - - hp2 = horzpos + ( p_width8 + 2*shift )*8 * 600/prn->DPI; - - - sweep_data->left_margin = horzpos; - sweep_data->right_margin = hp2 + prn->marg_diff; - - - for (i = 0; i < 2; i++) - { - nozzles[i].DPI = prn->DPI; - - nozzles[i].pins_used_d2 = numlines/2; - nozzles[i].unused_pins_p1 = 301-numlines; - nozzles[i].first_pin = 1; - if (i == 0) - { - nozzles[i].left_margin = horzpos + prn->marg_diff; - nozzles[i].right_margin = hp2 + prn->marg_diff; - if(sweep_data->direction == right_to_left) - /* 0 */ - nozzles[i].nozzle_delay=prn->right_to_left_delay[0]; - else - /* 6 */ - nozzles[i].nozzle_delay=prn->left_to_right_delay[0]; + place = ppa; + + /* Place 0's in the first 12 columns */ + memset(place, 0, numlines/2 * shift); + place += numlines/2 * shift; + + if (sweepDataP->direction == right_to_left) { /* right-to-left */ + int i; + + for (i = pWidth8 + shift - 1; i >= 0; --i) { + if (i >= shift) { + unsigned int j; + + for (j = 0; j < numlines/2; ++j) + *place++ = data[j * 2 * width8 + i + left / 8 - shift]; + } else { + memset(place, 0, numlines/2); + place += numlines/2; + } + + if (i < pWidth8) { + unsigned int j; + + for (j = 0; j < numlines/2; ++j) + *place++ = data[(j * 2 + 1) * width8 + i + left / 8]; + } else { + memset(place, 0, numlines/2); + place += numlines/2; + } + } + } else { + /* sweep_data->direction == left_to_right */ + unsigned int i; + for (i = 0; i < pWidth8 + shift; ++i) { + if (i < pWidth8) { + unsigned int j; + for (j = 0; j < numlines/2; ++j) + *place++ = data[(j * 2 + 1) * width8 + i + left / 8]; + } else { + memset(place, 0, numlines/2); + place += numlines/2; + } + + if (i >= shift) { + unsigned int j; + for (j = 0; j < numlines/2; ++j) + *place++ = data[j * 2 * width8 + i + left / 8 - shift]; + } else { + memset(place, 0, numlines/2); + place += numlines/2; + } + } } - else - { - nozzles[i].left_margin = horzpos; - nozzles[i].right_margin = hp2; - if(sweep_data->direction == right_to_left) - /* 2 */ - nozzles[i].nozzle_delay=prn->right_to_left_delay[1]; - else - /* 0 */ - nozzles[i].nozzle_delay=prn->left_to_right_delay[1]; + /* Done with data */ + free(data); data=NULL; + + /* Place 0's in the last 12 columns */ + memset(place, 0, numlines/2 * shift); + place += numlines/2 * shift; + maxplace = place; + + /* Create sweep data */ + sweepDataP->image_data = ppa; + sweepDataP->data_size = maxplace-ppa; + sweepDataP->in_color = False; + + /* + horzpos = left*600/prn->DPI + (sweep_data->direction==left_to_right ? 0*600/prn->DPI : 0); + */ + horzpos = left * 600 / prnP->DPI; + + hp2 = horzpos + (pWidth8 + 2 * shift) * 8 * 600 /prnP->DPI; + + sweepDataP->left_margin = horzpos; + sweepDataP->right_margin = hp2 + prnP->marg_diff; + + for (i = 0; i < 2; ++i) { + nozzles[i].DPI = prnP->DPI; + + nozzles[i].pins_used_d2 = numlines/2; + nozzles[i].unused_pins_p1 = 301 - numlines; + nozzles[i].first_pin = 1; + + if (i == 0) { + nozzles[i].left_margin = horzpos + prnP->marg_diff; + nozzles[i].right_margin = hp2 + prnP->marg_diff; + if (sweepDataP->direction == right_to_left) /* 0 */ + + nozzles[i].nozzle_delay = prnP->right_to_left_delay[0]; + else /* 6 */ + nozzles[i].nozzle_delay = prnP->left_to_right_delay[0]; + } else { + nozzles[i].left_margin = horzpos; + nozzles[i].right_margin = hp2; + + if (sweepDataP->direction == right_to_left) /* 2 */ + nozzles[i].nozzle_delay = prnP->right_to_left_delay[1]; + else /* 0 */ + nozzles[i].nozzle_delay = prnP->left_to_right_delay[1]; + } } - } - sweep_data->nozzle_data_size = 2; - sweep_data->nozzle_data = malloc(sizeof(nozzles)); - if(sweep_data->nozzle_data == NULL) - return 0; - memcpy(sweep_data->nozzle_data,nozzles,sizeof(nozzles)); + sweepDataP->nozzle_data_size = 2; + MALLOCARRAY_NOFAIL(sweepDataP->nozzle_data, 2); + sweepDataP->nozzle_data[0] = nozzles[0]; + sweepDataP->nozzle_data[1] = nozzles[1]; - return 2; + return 2; } -- cgit 1.4.1