diff options
Diffstat (limited to 'converter/other/jbig/libjbig')
-rw-r--r-- | converter/other/jbig/libjbig/ANNOUNCE | 172 | ||||
-rw-r--r-- | converter/other/jbig/libjbig/COPYING | 339 | ||||
-rw-r--r-- | converter/other/jbig/libjbig/Makefile | 24 | ||||
-rw-r--r-- | converter/other/jbig/libjbig/include/jbig.h | 233 | ||||
-rw-r--r-- | converter/other/jbig/libjbig/include/jbig_ar.h | 53 | ||||
-rw-r--r-- | converter/other/jbig/libjbig/jbig.c | 3285 | ||||
-rw-r--r-- | converter/other/jbig/libjbig/jbig.txt | 810 | ||||
-rw-r--r-- | converter/other/jbig/libjbig/jbig_ar.c | 417 |
8 files changed, 5333 insertions, 0 deletions
diff --git a/converter/other/jbig/libjbig/ANNOUNCE b/converter/other/jbig/libjbig/ANNOUNCE new file mode 100644 index 00000000..15ce550d --- /dev/null +++ b/converter/other/jbig/libjbig/ANNOUNCE @@ -0,0 +1,172 @@ + +JBIG-KIT lossless image compression library +------------------------------------------- + +by Markus Kuhn + + +The latest release of JBIG-KIT can be downloaded from + + http://www.cl.cam.ac.uk/~mgk25/jbigkit/ + +JBIG-KIT implements a highly effective data compression algorithm for +bi-level high-resolution images such as fax pages or scanned +documents. + +JBIG-KIT provides two variants of a portable library of compression +and decompression functions with a documented interface. You can very +easily include into your image or document processing software. In +addition, JBIG-KIT provides ready-to-use compression and decompression +programs with a simple command line interface (similar to the +converters found in Jef Poskanzer's PBM graphics file conversion +package). + +JBIG-KIT implements the specification + + International Standard ISO/IEC 11544:1993 and ITU-T Recommendation + T.82(1993), "Information technology - Coded representation of picture + and audio information - progressive bi-level image compression", + <http://www.itu.int/rec/T-REC-T.82>, + +which is commonly referred to as the "JBIG1 standard". JBIG (Joint +Bi-level Image experts Group) is the committee which developed this +international standard for the lossless compression of images using +arithmetic coding. Like the well-known compression algorithms JPEG and +MPEG, JBIG has also been developed and published by the International +Organization for Standardization (ISO) and the International +Telecommunication Union (ITU). See also + + http://www.jpeg.org/jbig/ + http://www.iso.ch/ + http://www.itu.int/ + +The JBIG compression algorithm offers the following features: + + - Close to state-of-the-art lossless compression ratio for high + resolution bi-level images. + + - About 1.1 to 1.5 times better compression ratio on typical + scanned documents compared to G4 fax compression (ITU-T T.6), + which has been the best compression algorithm for scanned + documents available prior to JBIG. + + - Up to 30 times better compression of scanned images with dithered + images compared to G4 fax compression. + + - About 2 times better compression on typical 300 dpi documents + compared to 'gzip -9' on raw bitmaps. + + - About 3-4 times better compression than GIF on typical 300 dpi + documents. + + - Even much better competitive compression results on computer + generated images which are free of scanning distortions. + + - JBIG supports hierarchical "progressive" encoding, that means it is + possible to encode a low resolution image first, followed by + resolution enhancement data. This allows, for instance, a document + browser to display already a good 75 dpi low resolution version of + an image, while the data necessary to reconstruct the full 300 dpi + version for laser printer reproduction is still arriving (say + over a slow network link or mass storage medium). + + - The various resolution layers of a JBIG image in progressive + encoding mode together require not much more space than a + normal non-progressive mode encoded image (which JBIG also + supports). + + - The progressive encoding mode utilizes a quite sophisticated + resolution reduction algorithm which offers high quality low + resolution versions that preserve the shape of characters as well + as the integrity of thin lines and dithered images. + + - JBIG supports multiple bit planes and can this way also be used + for grayscale and color images, although the main field of + application is compression of bi-level images, i.e. images with + only two different pixel values. For grayscale images with up to + 6 bit per pixel, JBIG performs superior to JPEG's lossless + mode. + +JBIG-KIT can be used as free software under the GNU General Public +License. Other license arrangements more suitable for commercial +applications are available as well, please contact the author for +details. JBIG-KIT provides two portable libraries implemented in +ANSI/ISO C for encoding and decoding JBIG data streams, along with +documentation. The first library, jbig.c, implements nearly all of the +options that the JBIG standard provides, but keeps the entire +uncompressed image in memory. The second library, jbig85.c, implements +only the ITU-R T.85 subset of the standard that black/white fax +machines use (single bit per pixel, no "progressive" encoding), and +keeps only three lines of the uncompressed image in memory, making it +particularly attractive for low-memory embedded applications. + +The libraries are not intended for 8-bit or 16-bit machine +architectures (e.g., old MS-DOS C compilers). For maximum performance, +a 32-bit processor is required (64-bit systems work too, of course). +On architectures with 16-bit pointer arithmetic, the full-featured +jbig.c library can process only very small images. + +Special features of the full-featured jbig.c variant: + + - Fully reentrant multithread-capable design (no global or static + variables, isolated malloc()/free() calls, etc.) + + - Capable of handling incomplete and growing JBIG data streams in + order to allow earliest display of low resolution versions + + - Capable of handling several incoming data streams simultaneously + in one single process and thread + + - Especially designed with applications in mind that want to display + incoming data as early as possible (e.g., similar to the way in + which Netscape Navigator handles incoming GIF images) + + - Implements all JBIG features and options including progressive and + sequential encoding, multiple bit planes, user specified + resolution reduction and deterministic prediction tables, adaptive + template changes for optimal performance on half-tone images, + deterministic prediction, typical prediction in lowest and + differential layers, various stripe orderings, etc; only the SEQ + and HITOLO options are currently not supported by the decoder + (they are normally never required, but could be added later in + case of user requirements) + + - Suitable for fax applications, satisfies ITU-T T.85 profile + + - Efficient code, optimized utilization of 32-bit processor + registers + + - Very easy to use documented C library interface + + - Included Gray code conversion routines for efficient encoding + of grayscale images + + - Ready-to-use pbmtojbg and jbgtopbm converters. + +Special features of the light-weight jbig85.c variant: + + - Suitable for low-memory embedded applications + + - Implements only the JBIG1 subset defined in the ITU-T T.85 + profile (single bit plane, no differential layers) + + - Requires only three pixel rows of the uncompressed image to be + kept in memory + + - Handles all NEWLEN modes of operation required by ITU-T T.85 with + just a single pass over the data, automatically performing the + necessary lookahead after the last stripe + + - Codec buffers only a few bytes of arithmetic-codec data and outputs + resulting bytes or lines as soon as they are available. + +I will try to provide free support and maintenance for this software +for the foreseeable future, depending on my available time. + +Happy compressing ... + +Markus Kuhn + +-- +Markus Kuhn, Computer Laboratory, University of Cambridge +http://www.cl.cam.ac.uk/~mgk25/ || CB3 0FD, Great Britain diff --git a/converter/other/jbig/libjbig/COPYING b/converter/other/jbig/libjbig/COPYING new file mode 100644 index 00000000..a43ea212 --- /dev/null +++ b/converter/other/jbig/libjbig/COPYING @@ -0,0 +1,339 @@ + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 675 Mass Ave, Cambridge, MA 02139, USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + Appendix: How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) 19yy <name of author> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) 19yy name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + <signature of Ty Coon>, 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/converter/other/jbig/libjbig/Makefile b/converter/other/jbig/libjbig/Makefile new file mode 100644 index 00000000..2e574903 --- /dev/null +++ b/converter/other/jbig/libjbig/Makefile @@ -0,0 +1,24 @@ +ifeq ($(SRCDIR)x,x) + SRCDIR = $(CURDIR)/../../../.. + BUILDDIR = $(SRCDIR) +endif +SUBDIR = converter/other/jbig/libjbig +VPATH=.:$(SRCDIR)/$(SUBDIR) + +include $(BUILDDIR)/config.mk + +LIBJBIG_OBJECTS = jbig.o jbig_ar.o + +OBJECTS = $(LIBJBIG_OBJECTS) +MERGE_OBJECTS = $(LIBJBIG_OBJECTS) + +COMP_INCLUDES = -I$(SRCDIR)/$(SUBDIR)/include + +all: libjbig.a + +include $(SRCDIR)/common.mk + +libjbig.a: $(LIBJBIG_OBJECTS) + $(AR) -rc $@ $^ + $(RANLIB) $@ + diff --git a/converter/other/jbig/libjbig/include/jbig.h b/converter/other/jbig/libjbig/include/jbig.h new file mode 100644 index 00000000..67994107 --- /dev/null +++ b/converter/other/jbig/libjbig/include/jbig.h @@ -0,0 +1,233 @@ +/* + * Header file for the portable JBIG compression library + * + * Copyright 1995-2014 -- Markus Kuhn -- http://www.cl.cam.ac.uk/~mgk25/ + */ + +#ifndef JBG_H +#define JBG_H + +#include <stddef.h> +#include "jbig_ar.h" + +/* + * JBIG-KIT version number + */ + +#define JBG_VERSION "2.1" +#define JBG_VERSION_MAJOR 2 +#define JBG_VERSION_MINOR 1 + +/* + * JBIG-KIT licence agreement reference code: + * If you use JBIG-KIT under a commercial licence, please replace + * below the letters GPL with the reference code that you received + * with your licence agreement. (This code is typically a letter "A" + * followed by four decimal digits, e.g. "A1234".) + */ + +#define JBG_LICENCE "GPL" + +/* + * Buffer block for SDEs which are temporarily stored by encoder + */ + +#define JBG_BUFSIZE 4000 + +struct jbg_buf { + unsigned char d[JBG_BUFSIZE]; /* one block of a buffer list */ + int len; /* length of the data in this block */ + struct jbg_buf *next; /* pointer to next block */ + struct jbg_buf *previous; /* pointer to previous block * + * (unused in freelist) */ + struct jbg_buf *last; /* only used in list head: final block of list */ + struct jbg_buf **free_list; /* pointer to pointer to head of free list */ +}; + +/* + * Maximum number of ATMOVEs per stripe that decoder can handle + */ + +#define JBG_ATMOVES_MAX 64 + +/* + * Option and order flags + */ + +#define JBG_HITOLO 0x08 +#define JBG_SEQ 0x04 +#define JBG_ILEAVE 0x02 +#define JBG_SMID 0x01 + +#define JBG_LRLTWO 0x40 +#define JBG_VLENGTH 0x20 +#define JBG_TPDON 0x10 +#define JBG_TPBON 0x08 +#define JBG_DPON 0x04 +#define JBG_DPPRIV 0x02 +#define JBG_DPLAST 0x01 + +/* encoding options that will not be indicated in the header */ + +#define JBG_DELAY_AT 0x100 /* Delay ATMOVE until the first line of the next + * stripe. Option available for compatibility + * with conformance test example in clause 7.2. */ + +#define JBG_SDRST 0x200 /* Use SDRST instead of SDNORM. This option is + * there for anyone who needs to generate + * test data that covers the SDRST cases. */ + +/* + * Possible error code return values + */ + +#define JBG_EOK (0 << 4) +#define JBG_EOK_INTR (1 << 4) +#define JBG_EAGAIN (2 << 4) +#define JBG_ENOMEM (3 << 4) +#define JBG_EABORT (4 << 4) +#define JBG_EMARKER (5 << 4) +#define JBG_EINVAL (6 << 4) +#define JBG_EIMPL (7 << 4) +#define JBG_ENOCONT (8 << 4) + +/* + * Status of a JBIG encoder + */ + +struct jbg_enc_state { + int d; /* resolution layer of the input image */ + unsigned long xd, yd; /* size of the input image (resolution layer d) */ + unsigned long yd1; /* BIH announced height of image, use yd1 != yd to + emulate T.85-style NEWLEN height updates for tests */ + int planes; /* number of different bitmap planes */ + int dl; /* lowest resolution layer in the next BIE */ + int dh; /* highest resolution layer in the next BIE */ + unsigned long l0; /* number of lines per stripe at lowest * + * resolution layer 0 */ + unsigned long stripes; /* number of stripes required (determ. by l0) */ + unsigned char **lhp[2]; /* pointers to lower/higher resolution images */ + int *highres; /* index [plane] of highres image in lhp[] */ + int order; /* SDE ordering parameters */ + int options; /* encoding parameters */ + unsigned mx, my; /* maximum ATMOVE window size */ + int *tx; /* array [plane] with x-offset of adaptive template pixel */ + char *dppriv; /* optional private deterministic prediction table */ + char *res_tab; /* table for the resolution reduction algorithm */ + struct jbg_buf ****sde; /* array [stripe][layer][plane] pointers to * + * buffers for stored SDEs */ + struct jbg_arenc_state *s; /* array [planes] for arithm. encoder status */ + struct jbg_buf *free_list; /* list of currently unused SDE block buffers */ + void (*data_out)(unsigned char *start, size_t len, void *file); + /* data write callback */ + void *file; /* parameter passed to data_out() */ + char *tp; /* buffer for temp. values used by diff. typical prediction */ + unsigned char *comment; /* content of comment marker segment to be added + at next opportunity (will be reset to NULL + as soon as comment has been written) */ + unsigned long comment_len; /* length of data pointed to by comment */ +}; + + +/* + * Status of a JBIG decoder + */ + +struct jbg_dec_state { + /* data from BIH */ + int d; /* resolution layer of the full image */ + int dl; /* first resolution layer in this BIE */ + unsigned long xd, yd; /* size of the full image (resolution layer d) */ + int planes; /* number of different bitmap planes */ + unsigned long l0; /* number of lines per stripe at lowest * + * resolution layer 0 */ + unsigned long stripes; /* number of stripes required (determ. by l0) */ + int order; /* SDE ordering parameters */ + int options; /* encoding parameters */ + int mx, my; /* maximum ATMOVE window size */ + char *dppriv; /* optional private deterministic prediction table */ + + /* loop variables */ + unsigned long ii[3]; /* current stripe, layer, plane (outer loop first) */ + + /* + * Pointers to array [planes] of lower/higher resolution images. + * lhp[d & 1] contains image of layer d. + */ + unsigned char **lhp[2]; + + /* status information */ + int **tx, **ty; /* array [plane][layer-dl] with x,y-offset of AT pixel */ + struct jbg_ardec_state **s; /* array [plane][layer-dl] for arithmetic * + * decoder status */ + int **reset; /* array [plane][layer-dl] remembers if previous stripe * + * in that plane/resolution ended with SDRST. */ + unsigned long bie_len; /* number of bytes read so far */ + unsigned char buffer[20]; /* used to store BIH or marker segments fragm. */ + int buf_len; /* number of bytes in buffer */ + unsigned long comment_skip; /* remaining bytes of a COMMENT segment */ + unsigned long x; /* x position of next pixel in current SDE */ + unsigned long i; /* line in current SDE (first line of each stripe is 0) */ + int at_moves; /* number of AT moves in the current stripe */ + unsigned long at_line[JBG_ATMOVES_MAX]; /* lines at which an * + * AT move will happen */ + int at_tx[JBG_ATMOVES_MAX], at_ty[JBG_ATMOVES_MAX]; /* ATMOVE offsets in * + * current stripe */ + unsigned long line_h1, line_h2, line_h3; /* variables of decode_pscd */ + unsigned long line_l1, line_l2, line_l3; + int pseudo; /* flag for TPBON/TPDON: next pixel is pseudo pixel */ + int **lntp; /* flag [plane][layer-dl] for TP: line is not typical */ + + unsigned long xmax, ymax; /* if possible abort before image gets * + * larger than this size */ + int dmax; /* abort after this layer */ +}; + + +/* some macros (too trivial for a function) */ + +#define jbg_dec_getplanes(s) ((s)->planes) + + +/* function prototypes */ + +void jbg_enc_init(struct jbg_enc_state *s, unsigned long x, unsigned long y, + int planes, unsigned char **p, + void (*data_out)(unsigned char *start, size_t len, + void *file), + void *file); +int jbg_enc_lrlmax(struct jbg_enc_state *s, unsigned long mwidth, + unsigned long mheight); +void jbg_enc_layers(struct jbg_enc_state *s, int d); +int jbg_enc_lrange(struct jbg_enc_state *s, int dl, int dh); +void jbg_enc_options(struct jbg_enc_state *s, int order, int options, + unsigned long l0, int mx, int my); +void jbg_enc_out(struct jbg_enc_state *s); +void jbg_enc_free(struct jbg_enc_state *s); + +void jbg_dec_init(struct jbg_dec_state *s); +void jbg_dec_maxsize(struct jbg_dec_state *s, unsigned long xmax, + unsigned long ymax); +int jbg_dec_in(struct jbg_dec_state *s, unsigned char *data, size_t len, + size_t *cnt); +unsigned long jbg_dec_getwidth(const struct jbg_dec_state *s); +unsigned long jbg_dec_getheight(const struct jbg_dec_state *s); +unsigned char *jbg_dec_getimage(const struct jbg_dec_state *s, int plane); +unsigned long jbg_dec_getsize(const struct jbg_dec_state *s); +void jbg_dec_merge_planes(const struct jbg_dec_state *s, int use_graycode, + void (*data_out)(unsigned char *start, size_t len, + void *file), void *file); +unsigned long jbg_dec_getsize_merged(const struct jbg_dec_state *s); +void jbg_dec_free(struct jbg_dec_state *s); + +const char *jbg_strerror(int errnum); +void jbg_int2dppriv(unsigned char *dptable, const char *internal); +void jbg_dppriv2int(char *internal, const unsigned char *dptable); +unsigned long jbg_ceil_half(unsigned long x, int n); +void jbg_split_planes(unsigned long x, unsigned long y, int has_planes, + int encode_planes, + const unsigned char *src, unsigned char **dest, + int use_graycode); +int jbg_newlen(unsigned char *bie, size_t len); + +#endif /* JBG_H */ diff --git a/converter/other/jbig/libjbig/include/jbig_ar.h b/converter/other/jbig/libjbig/include/jbig_ar.h new file mode 100644 index 00000000..d58b1ae0 --- /dev/null +++ b/converter/other/jbig/libjbig/include/jbig_ar.h @@ -0,0 +1,53 @@ +/* + * Header file for the arithmetic encoder and decoder of + * the portable JBIG compression library + * + * Markus Kuhn -- http://www.cl.cam.ac.uk/~mgk25/jbigkit/ + */ + +#ifndef JBG_AR_H +#define JBG_AR_H + +/* + * Status of arithmetic encoder + */ + +struct jbg_arenc_state { + unsigned char st[4096]; /* probability status for contexts, MSB = MPS */ + unsigned long c; /* register C: base of coding intervall, * + * layout as in Table 23 */ + unsigned long a; /* register A: normalized size of coding interval */ + long sc; /* number of buffered 0xff values that might still overflow */ + int ct; /* bit shift counter, determines when next byte will be written */ + int buffer; /* buffer for most recent output byte != 0xff */ + void (*byte_out)(int, void *); /* function that receives all PSCD bytes */ + void *file; /* parameter passed to byte_out */ +}; + +/* + * Status of arithmetic decoder + */ + +struct jbg_ardec_state { + unsigned char st[4096]; /* probability status for contexts, MSB = MPS */ + unsigned long c; /* register C: base of coding intervall, * + * layout as in Table 25 */ + unsigned long a; /* register A: normalized size of coding interval */ + unsigned char *pscd_ptr; /* pointer to next PSCD data byte */ + unsigned char *pscd_end; /* pointer to byte after PSCD */ + int ct; /* bit-shift counter, determines when next byte will be read; + * special value -1 signals that zero-padding has started */ + int startup; /* boolean flag that controls initial fill of s->c */ + int nopadding; /* boolean flag that triggers return -2 between + * reaching PSCD end and decoding the first symbol + * that might never have been encoded in the first + * place */ +}; + +void arith_encode_init(struct jbg_arenc_state *s, int reuse_st); +void arith_encode_flush(struct jbg_arenc_state *s); +void arith_encode(struct jbg_arenc_state *s, int cx, int pix); +void arith_decode_init(struct jbg_ardec_state *s, int reuse_st); +int arith_decode(struct jbg_ardec_state *s, int cx); + +#endif /* JBG_AR_H */ diff --git a/converter/other/jbig/libjbig/jbig.c b/converter/other/jbig/libjbig/jbig.c new file mode 100644 index 00000000..1ff867e8 --- /dev/null +++ b/converter/other/jbig/libjbig/jbig.c @@ -0,0 +1,3285 @@ +/* + * Portable JBIG image compression library + * + * Copyright 1995-2014 -- Markus Kuhn -- http://www.cl.cam.ac.uk/~mgk25/ + * + * This module implements a portable standard C encoder and decoder + * using the JBIG1 lossless bi-level image compression algorithm + * specified in International Standard ISO 11544:1993 and + * ITU-T Recommendation T.82. See the file jbig.txt for usage + * instructions and application examples. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * If you want to use this program under different license conditions, + * then contact the author for an arrangement. + */ + +#ifdef DEBUG +#include <stdio.h> +#else +#define NDEBUG +#endif + +#include <stdlib.h> +#include <string.h> +#include <assert.h> + +#include "jbig.h" + +#define MX_MAX 127 + /* maximal mx offset for adaptive template in the encoder */ + +#define TPB2CX 0x195 /* contexts for TP special pixels */ +#define TPB3CX 0x0e5 +#define TPDCX 0xc3f + +/* marker codes */ +#define MARKER_STUFF 0x00 +#define MARKER_RESERVE 0x01 +#define MARKER_SDNORM 0x02 +#define MARKER_SDRST 0x03 +#define MARKER_ABORT 0x04 +#define MARKER_NEWLEN 0x05 +#define MARKER_ATMOVE 0x06 +#define MARKER_COMMENT 0x07 +#define MARKER_ESC 0xff + +/* loop array indices */ +#define STRIPE 0 +#define LAYER 1 +#define PLANE 2 + +/* special jbg_buf pointers (instead of NULL) */ +#define SDE_DONE ((struct jbg_buf *) -1) +#define SDE_TODO ((struct jbg_buf *) 0) + +/* object code version id */ + +const char jbg_version[] = + "JBIG-KIT " JBG_VERSION " -- (c) 1995-2014 Markus Kuhn -- " + "Licence: " JBG_LICENCE "\n"; + +/* + * The following array specifies for each combination of the 3 + * ordering bits, which ii[] variable represents which dimension + * of s->sde. + */ +static const int iindex[8][3] = { + { 2, 1, 0 }, /* no ordering bit set */ + { -1, -1, -1}, /* SMID -> illegal combination */ + { 2, 0, 1 }, /* ILEAVE */ + { 1, 0, 2 }, /* SMID + ILEAVE */ + { 0, 2, 1 }, /* SEQ */ + { 1, 2, 0 }, /* SEQ + SMID */ + { 0, 1, 2 }, /* SEQ + ILEAVE */ + { -1, -1, -1 } /* SEQ + SMID + ILEAVE -> illegal combination */ +}; + +#define _(String) String /* to mark translatable string for GNU gettext */ + +/* + * Array with English ASCII error messages that correspond + * to return values from public functions in this library. + */ +static const char *errmsg[] = { + _("All OK"), /* JBG_EOK */ + _("Reached specified image size"), /* JBG_EOK_INTR */ + _("Unexpected end of input data stream"), /* JBG_EAGAIN */ + _("Not enough memory available"), /* JBG_ENOMEM */ + _("ABORT marker segment encountered"), /* JBG_EABORT */ + _("Unknown marker segment encountered"), /* JBG_EMARKER */ + _("Input data stream contains invalid data"), /* JBG_EINVAL */ + _("Input data stream uses unimplemented JBIG features"), /* JBG_EIMPL */ + _("Incremental BIE does not continue previous one") /* JBG_ENOCONT */ +}; + + +/* + * The following three functions are the only places in this code, were + * C library memory management functions are called. The whole JBIG + * library has been designed in order to allow multi-threaded + * execution. No static or global variables are used, so all fuctions + * are fully reentrant. However if you want to use this multi-thread + * capability and your malloc, realloc and free are not reentrant, + * then simply add the necessary semaphores or mutex primitives below. + * In contrast to C's malloc() and realloc(), but like C's calloc(), + * these functions take two parameters nmemb and size that are multiplied + * before being passed on to the corresponding C function. + * This we can catch all overflows during a size_t multiplication a + * a single place. + */ + +#ifndef SIZE_MAX +#define SIZE_MAX ((size_t) -1) /* largest value of size_t */ +#endif + +static void *checked_malloc(size_t nmemb, size_t size) +{ + void *p; + + /* Full manual exception handling is ugly here for performance + * reasons. If an adequate handling of lack of memory is required, + * then use C++ and throw a C++ exception instead of abort(). */ + + /* assert that nmemb * size <= SIZE_MAX */ + if (size > SIZE_MAX / nmemb) + abort(); + + p = malloc(nmemb * size); + + if (!p) + abort(); + +#if 0 + fprintf(stderr, "%p = malloc(%lu * %lu)\n", p, + (unsigned long) nmemb, (unsigned long) size); +#endif + + return p; +} + + +static void *checked_realloc(void *ptr, size_t nmemb, size_t size) +{ + void *p; + + /* Full manual exception handling is ugly here for performance + * reasons. If an adequate handling of lack of memory is required, + * then use C++ and throw a C++ exception here instead of abort(). */ + + /* assert that nmemb * size <= SIZE_MAX */ + if (size > SIZE_MAX / nmemb) + abort(); + + p = realloc(ptr, nmemb * size); + + if (!p) + abort(); + +#if 0 + fprintf(stderr, "%p = realloc(%p, %lu * %lu)\n", p, ptr, + (unsigned long) nmemb, (unsigned long) size); +#endif + + return p; +} + + +static void checked_free(void *ptr) +{ + free(ptr); + +#if 0 + fprintf(stderr, "free(%p)\n", ptr); +#endif + +} + + + + +/* + * Memory management for buffers which are used for temporarily + * storing SDEs by the encoder. + * + * The following functions manage a set of struct jbg_buf storage + * containers were each can keep JBG_BUFSIZE bytes. The jbg_buf + * containers can be linked to form linear double-chained lists for + * which a number of operations are provided. Blocks which are + * tempoarily not used any more are returned to a freelist which each + * encoder keeps. Only the destructor of the encoder actually returns + * the block via checked_free() to the stdlib memory management. + */ + + +/* + * Allocate a new buffer block and initialize it. Try to get it from + * the free_list, and if it is empty, call checked_malloc(). + */ +static struct jbg_buf *jbg_buf_init(struct jbg_buf **free_list) +{ + struct jbg_buf *new_block; + + /* Test whether a block from the free list is available */ + if (*free_list) { + new_block = *free_list; + *free_list = new_block->next; + } else { + /* request a new memory block */ + new_block = (struct jbg_buf *) checked_malloc(1, sizeof(struct jbg_buf)); + } + new_block->len = 0; + new_block->next = NULL; + new_block->previous = NULL; + new_block->last = new_block; + new_block->free_list = free_list; + + return new_block; +} + + +/* + * Return an entire free_list to the memory management of stdlib. + * This is only done by jbg_enc_free(). + */ +static void jbg_buf_free(struct jbg_buf **free_list) +{ + struct jbg_buf *tmp; + + while (*free_list) { + tmp = (*free_list)->next; + checked_free(*free_list); + *free_list = tmp; + } + + return; +} + + +/* + * Append a single byte to a single list that starts with the block + * *(struct jbg_buf *) head. The type of *head is void here in order to + * keep the interface of the arithmetic encoder gereric, which uses this + * function as a call-back function in order to deliver single bytes + * for a PSCD. + */ +static void jbg_buf_write(int b, void *head) +{ + struct jbg_buf *now; + + now = ((struct jbg_buf *) head)->last; + if (now->len < JBG_BUFSIZE - 1) { + now->d[now->len++] = b; + return; + } + now->next = jbg_buf_init(((struct jbg_buf *) head)->free_list); + now->next->previous = now; + now->next->d[now->next->len++] = b; + ((struct jbg_buf *) head)->last = now->next; + + return; +} + + +/* + * Remove any trailing zero bytes from the end of a linked jbg_buf list, + * however make sure that no zero byte is removed which directly + * follows a 0xff byte (i.e., keep MARKER_ESC MARKER_STUFF sequences + * intact). This function is used to remove any redundant final zero + * bytes from a PSCD. + */ +static void jbg_buf_remove_zeros(struct jbg_buf *head) +{ + struct jbg_buf *last; + + while (1) { + /* remove trailing 0x00 in last block of list until this block is empty */ + last = head->last; + while (last->len && last->d[last->len - 1] == 0) + last->len--; + /* if block became really empty, remove it in case it is not the + * only remaining block and then loop to next block */ + if (last->previous && !last->len) { + head->last->next = *head->free_list; + *head->free_list = head->last; + head->last = last->previous; + head->last->next = NULL; + } else + break; + } + + /* + * If the final non-zero byte is 0xff (MARKER_ESC), then we just have + * removed a MARKER_STUFF and we will append it again now in order + * to preserve PSCD status of byte stream. + */ + if (head->last->len && head->last->d[head->last->len - 1] == MARKER_ESC) + jbg_buf_write(MARKER_STUFF, head); + + return; +} + + +/* + * The jbg_buf list which starts with block *new_prefix is concatenated + * with the list which starts with block **start and *start will then point + * to the first block of the new list. + */ +static void jbg_buf_prefix(struct jbg_buf *new_prefix, struct jbg_buf **start) +{ + new_prefix->last->next = *start; + new_prefix->last->next->previous = new_prefix->last; + new_prefix->last = new_prefix->last->next->last; + *start = new_prefix; + + return; +} + + +/* + * Send the contents of a jbg_buf list that starts with block **head to + * the call back function data_out and return the blocks of the jbg_buf + * list to the freelist from which these jbg_buf blocks have been taken. + * After the call, *head == NULL. + */ +static void jbg_buf_output(struct jbg_buf **head, + void (*data_out)(unsigned char *start, + size_t len, void *file), + void *file) +{ + struct jbg_buf *tmp; + + while (*head) { + data_out((*head)->d, (*head)->len, file); + tmp = (*head)->next; + (*head)->next = *(*head)->free_list; + *(*head)->free_list = *head; + *head = tmp; + } + + return; +} + + +/* + * Calculate y = ceil(x/2) applied n times, which is equivalent to + * y = ceil(x/(2^n)). This function is used to + * determine the number of pixels per row or column after n resolution + * reductions. E.g. X[d-1] = jbg_ceil_half(X[d], 1) and X[0] = + * jbg_ceil_half(X[d], d) as defined in clause 6.2.3 of T.82. + */ +unsigned long jbg_ceil_half(unsigned long x, int n) +{ + unsigned long mask; + + assert(n >= 0 && n < 32); + mask = (1UL << n) - 1; /* the lowest n bits are 1 here */ + return (x >> n) + ((mask & x) != 0); +} + + +/* + * Set L0 (the number of lines in a stripe at lowest resolution) + * to a default value, such that there are about 35 stripes, as + * suggested in Annex C of ITU-T T.82, without exceeding the + * limit 128/2^D suggested in Annex A. + */ +static void jbg_set_default_l0(struct jbg_enc_state *s) +{ + s->l0 = jbg_ceil_half(s->yd, s->d) / 35; /* 35 stripes/image */ + while ((s->l0 << s->d) > 128) /* but <= 128 lines/stripe */ + --s->l0; + if (s->l0 < 2) s->l0 = 2; +} + + +/* + * Calculate the number of stripes, as defined in clause 6.2.3 of T.82. + */ +static unsigned long jbg_stripes(unsigned long l0, unsigned long yd, + unsigned long d) +{ + unsigned long y0 = jbg_ceil_half(yd, d); + + return y0 / l0 + (y0 % l0 != 0); +} + + +/* + * Resolution reduction table given by ITU-T T.82 Table 17 + */ + +static char jbg_resred[4096] = { + 0,0,0,1,0,0,0,1,0,1,1,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1, + 0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1, + 0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1, + 1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,1,0,1,0,0,1,1,1,0,1,1, + 0,0,0,1,0,0,0,1,0,0,1,0,0,0,1,1,0,1,1,1,0,0,0,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,1,1,0,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,1,0,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1, + 1,0,0,1,0,0,1,1,0,1,1,1,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,1,0,0,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,0,0,1,0,0,0,1,0,0,1,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,0,1,1,0,1,1,1,1,1,1,0,1,1,1,0, + 0,0,0,0,0,0,0,1,0,0,1,0,0,0,0,1,1,1,1,1,1,1,0,0,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,1,0,0,1,0,0,1,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1, + 0,0,0,1,0,0,0,1,0,1,1,0,1,0,1,1,1,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1, + 1,1,1,0,1,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1, + 1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,1,1,1,1,1,1, + 0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,1,1,0,1,0,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,1,0,0,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,0,1,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,1,1,0,0,1,1,0,0,1,1,1,1,1,1,0,1,1,1,1,0,1,1, + 1,0,0,1,0,0,1,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,0, + 0,0,1,0,1,1,1,1,0,0,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,0, + 0,0,0,0,1,0,0,1,0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,0,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,1,1,0,1,0,0,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,1,1,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,1,1,0,1,0,1,0,1,1,1,1,1,1,1,0,1,1,1,0,1,1,1, + 0,0,1,0,0,1,1,1,0,1,1,1,1,1,1,1,0,1,1,1,1,0,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1, + 0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,1,0,0,1,0,0,1,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,0,0,0,1,0,1,0,1,0,1,0,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,1,1,1,0,1,1,1, + 0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,1,1,0,1,0,1,1,0,0,0,1,0,0,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,1,1,0,0,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0,1,1,0,0,0,0,0,0,1, + 0,0,1,0,0,1,1,1,0,0,0,0,1,0,0,1,0,0,0,1,1,1,1,0,1,0,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,0,1,0,1,1,0, + 0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,0,0,0,1,0,1,1,1,0,1,1,1, + 0,0,0,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,1,1,0,1,0,0,0,1,1,0,1,0,0,0,0,1,1,1,1,0,0,1,1,1,0,1,1,0,0,1,1, + 0,0,0,0,0,0,0,0,1,1,0,1,0,0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,1,0,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,0,0,1,1,0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,1,0,0,0,1,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,1,1,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1, + 0,0,0,1,0,0,1,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,1,0,0,1,0,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1, + 0,0,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,1,0,0,0,1,0,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1, + 0,0,1,1,1,1,1,1,0,0,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,1,0,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1, + 0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,1,1,0,1,1, + 0,0,0,1,0,0,0,1,0,0,1,0,0,0,1,1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,1,0,1,1,0,1,1,1,0,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,1,1,0,0,0,0,0,1,0,1,0,1,1,0,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,1,0,0,1,0,0,1,1,0,0,1,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1,1,0,1,1, + 1,0,1,0,1,0,0,1,1,0,1,1,0,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,1,0,0,0,1,1,0,1,1,0,1,1,1, + 0,0,1,0,0,0,0,1,0,0,0,0,0,0,1,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,0,1,1,1,1, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,1,1,0,0,0,0,0,1,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,1,0,1,0,1,0,1,1,0,1,0,1,0,0,0,1,1,1,1,1,1,1,1,1, + 1,1,1,0,1,0,0,0,1,1,0,1,0,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1, + 1,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,1,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,1,1,0,1,1, + 0,0,1,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,1,0,0,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,1,0,0,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,1,0,1,1,0,1,1,0,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,1,1,1,0,0,0,0,0,0,1,1,1,1,0,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,1,0,1,0,0,0,1,1,1,0,1,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,1,1,0,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,0,1,1, + 1,0,0,0,1,0,0,0,0,1,1,1,0,1,0,1,1,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0,1,1,1,1,1,0,1,1,0, + 0,0,1,1,1,1,1,1,0,0,0,0,1,0,0,1,0,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,1,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,1,0,0,0,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,0,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,1,1,0,1,1,1,1,1,1,1,1,1,1,1, + 0,0,1,0,1,0,1,1,0,0,1,0,1,1,1,1,0,1,1,1,1,1,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,1,1,0,0,0,1,0,1,1,1,1,1,1,1,0,1,1,1,0,1,1,1, + 0,0,1,0,1,0,1,1,0,1,1,1,1,1,1,1,0,0,1,1,1,0,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,1,1,0,0,0,0,0,0,0,1,0,0,0,0,1,0,0,1, + 0,0,0,1,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,0,0,0,0,0,0,1, + 0,0,0,0,0,0,0,1,0,1,1,1,0,1,0,1,0,0,1,0,0,0,0,1,0,1,0,1,0,1,0,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,1,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1, + 0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,1,0,1,0,0,1,0,0,1,0,0,0,0,0,0,0,1, + 0,0,0,0,1,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,1,0,0,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,1,0,0,0,0,0,0,0,0,0,1,0,1,0,0,1,1, + 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,1,0,0,0,1,0,0,1,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,1,1,0,0,0,0,1,1,0,0,0,0,0,0,0, + 0,0,1,0,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,1,0,0,1,1, + 0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0, + 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,1,1, + 0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,1,0,0,1,1, + 0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,1,0,1,0,1,0,0,0,1,0,1,1,1,1,1,1,1, + 0,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,1,1,1,0,0,1,1, + 0,0,0,0,0,0,0,1,0,1,0,1,0,1,0,0,0,0,1,1,0,0,0,1,0,1,1,1,0,1,1,1 +}; + +/* + * Deterministic prediction tables given by ITU-T T.82 tables + * 19 to 22. The table below is organized differently, the + * index bits are permutated for higher efficiency. + */ + +static char jbg_dptable[256 + 512 + 2048 + 4096] = { + /* phase 0: offset=0 */ + 0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,2,0,2,2,2,2,2,2,2, + 0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,2,0,2,0,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + /* phase 1: offset=256 */ + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,2,2,2,0,2,0,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,2,2,2,2,1,2,1,2,2,2,2,1,1,1,1,2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,2, + 0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,2,2,2,2,0,2,2,2,2,2,2,2, + 0,2,0,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,0,0,2,2,2,2,2,0,0,2,2,2,2,2, + 0,2,2,2,2,1,2,1,2,2,2,2,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1, + 1,2,1,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,1,1,2,2,2,2,2,0,2,2,2,2,2,2, + 2,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,0,2,0,2,2,2,2,2,0,2,2,2,2,2,2,2, + 0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,2, + 2,2,2,2,2,1,1,1,2,2,2,2,1,1,1,1,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,0,1,2,0,2,0,2,2,2,2,2,0,2,0,2,2,2,2,1, + 0,2,0,2,2,1,2,1,2,2,2,2,1,1,1,1,0,0,0,0,2,2,2,2,0,2,0,2,2,2,2,1, + 2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,0,0,0,2,2,2,2,2, + 2,2,2,2,2,1,2,1,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,1,2,1,2,2,2,2,1, + 2,2,2,2,2,2,2,2,0,2,0,2,2,1,2,2,2,2,2,2,2,2,2,2,0,0,0,2,2,2,2,2, + /* phase 2: offset=768 */ + 2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2,2,2,2,1,1,1,1, + 0,2,2,2,2,1,2,1,2,2,2,2,1,2,1,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1, + 2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,1,2,1,2,2,2,2,2,1,1,1, + 2,0,2,2,2,1,2,1,0,2,2,2,1,2,1,2,2,2,2,0,2,2,2,2,0,2,0,2,2,2,2,2, + 0,2,0,0,1,1,1,1,2,2,2,2,1,1,1,1,0,2,0,2,1,1,1,1,2,2,2,2,1,1,1,1, + 2,2,0,2,2,2,1,2,2,2,2,2,1,2,1,2,2,2,0,2,2,1,2,1,0,2,0,2,1,1,1,1, + 2,0,0,2,2,2,2,2,0,2,0,2,2,0,2,0,2,0,2,0,2,2,2,1,2,2,0,2,1,1,2,1, + 2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2,2,2,2,1,1,1,1, + 0,0,0,0,2,2,2,2,0,0,0,0,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,0,2,2,2,2,1,0,2,2,2,1,1,1,1,2,0,2,2,2,2,2,2,0,2,0,2,2,1,2,1, + 2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2, + 0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2, + 2,2,0,2,2,2,2,2,2,2,2,2,2,2,0,2,2,0,0,2,2,1,2,1,0,2,2,2,1,1,1,1, + 2,2,2,0,2,2,2,2,2,2,0,2,2,0,2,0,2,1,2,2,2,2,2,2,1,2,1,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,1, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,1,1,1,2,2,2,2,1,1,1,1, + 2,2,2,1,2,2,2,2,2,2,1,2,0,0,0,0,2,2,0,2,2,1,2,2,2,2,2,2,1,1,1,1, + 2,0,0,0,2,2,2,2,0,2,2,2,2,2,2,0,2,2,2,0,2,2,2,2,2,0,0,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,0,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,1, + 0,2,0,2,2,1,1,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2, + 2,0,2,0,2,1,2,1,0,2,0,2,2,2,1,2,2,0,2,0,2,2,2,2,0,2,0,2,2,2,1,2, + 2,2,2,0,2,2,2,2,2,2,0,2,2,2,2,2,2,2,1,2,2,2,2,2,2,0,1,2,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2, + 2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2,2,1,2,1,0,2,2,2,1,1,1,1, + 2,0,2,0,2,1,2,2,0,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,1,2,2, + 2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,2,1,2,1, + 2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,0,0,2,2,2,1,2,2,2, + 0,0,2,0,2,2,2,2,0,2,0,2,2,0,2,0,1,1,1,2,2,2,2,2,2,2,2,2,2,1,1,1, + 2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,1, + 2,2,0,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2,2,2,2,1,1,1,1, + 0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2, + 2,0,0,2,2,2,2,2,0,2,0,2,2,2,2,2,1,0,1,2,2,2,2,1,0,2,2,2,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,0,2,2,0,2,0,2,1,2,2,2,2,2,2,2,2,0,2,2,1,2,2, + 0,2,0,0,1,1,1,1,0,2,2,2,1,1,1,1,2,2,2,2,2,2,2,2,2,0,2,2,1,2,1,1, + 2,2,0,2,2,1,2,2,2,2,2,2,1,2,2,2,2,0,2,2,2,2,2,2,0,2,0,2,1,2,1,1, + 2,0,2,0,2,2,2,2,0,2,0,2,2,1,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,1, + 2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,2,2,2,2,2,1,1,2,2,2,2,2,1,2,2,2, + 2,0,2,2,2,1,2,1,0,2,2,2,2,2,1,2,2,0,2,0,2,2,2,2,0,2,0,2,2,1,2,2, + 0,2,0,0,2,2,2,2,1,2,2,2,2,2,2,0,2,1,2,2,2,2,2,2,1,2,2,2,2,2,2,2, + 0,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2,1,0,2,2, + 0,0,0,2,2,1,1,1,2,2,2,2,1,2,2,2,2,0,2,0,2,2,2,1,2,2,2,2,1,2,1,2, + 0,0,0,0,2,2,2,2,2,2,0,2,2,1,2,2,2,1,2,1,2,2,2,2,1,2,1,2,0,2,2,2, + 2,0,2,0,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 0,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,1,2,2,2,2,2,0,2,2,1,2,2,0,0,0,2,2,2,2,2,1,2,2,0,2,2,2,1,2,1,2, + 2,0,2,0,2,2,2,2,0,2,0,2,2,1,2,2,0,2,0,0,2,2,2,2,2,2,2,2,2,1,2,2, + 2,2,2,2,2,2,2,2,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,0,2,0,2,2,2,1, + 1,2,0,2,2,1,2,1,2,2,2,2,1,2,2,2,2,0,2,0,2,2,2,2,2,0,2,2,1,1,1,1, + 0,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,2,1,2,1, + 2,2,0,0,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1, + 2,2,2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,2, + 2,0,2,0,2,2,2,2,2,1,1,2,2,2,2,2,2,2,2,2,2,2,2,1,0,2,0,2,2,2,1,2, + 2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2, + 2,0,2,0,2,2,2,2,2,0,2,0,2,2,2,2,2,0,2,0,2,2,2,2,0,0,0,0,2,1,2,1, + 2,2,2,2,2,1,2,1,0,2,0,2,2,2,2,2,2,0,2,0,2,2,2,2,0,2,0,2,2,2,2,1, + 2,0,2,0,2,2,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,0, + 2,0,2,0,2,2,2,1,2,2,2,0,2,2,2,1,2,0,2,0,2,2,2,2,0,0,0,2,2,2,2,1, + 2,0,2,0,2,2,2,2,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,2, + /* phase 3: offset=2816 */ + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,0,2,2,2,1,2,0,2,2,2,1,2,2,2,2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2, + 2,2,2,1,2,2,2,0,1,1,1,1,0,0,0,0,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,0,0,0,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2, + 2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,2,0,2,0,2,1,2,1, + 2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2, + 2,0,2,2,2,1,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,0,2,0,1,1,2,1, + 2,2,2,0,2,2,2,1,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1, + 0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1, + 2,0,0,2,2,1,1,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,1,1,1,2,0,0,0, + 2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2,2,2,2,0,2,2,2,1,2,0,2,0,2,1,2,1, + 2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1, + 2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2, + 2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,0,2,0,2,1,2,1,0,0,2,0,1,1,2,1, + 2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,0,0,0,2,1,1,1, + 2,2,2,1,2,2,2,0,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2, + 2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1, + 2,0,2,2,2,1,2,2,0,0,2,0,1,1,2,1,2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2, + 2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,0,0,0,1,1,1,1, + 2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,2,1,0,2,2,0,1,2, + 2,2,2,1,2,2,2,0,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2, + 2,1,2,1,2,0,2,0,1,2,1,1,0,2,0,0,0,0,2,1,1,1,2,0,0,0,0,0,1,1,1,1, + 2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,0,2,1,2,1,2,0,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,0,2,2,2,1,2,2,2,0,0,2,2,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2, + 2,0,2,0,2,1,2,1,0,0,0,0,1,1,1,1,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1, + 2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,0,0,0,2,1,1,1, + 2,2,2,0,2,2,2,1,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2, + 2,0,2,2,2,1,2,2,2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,1,2,1,2,0,2,0,1,2,1,1,0,2,0,0,2,0,2,2,2,1,2,2,0,2,1,2,1,2,0,2, + 2,2,2,1,2,2,2,0,2,2,1,2,2,2,0,2,2,1,2,2,2,0,2,2,2,2,0,2,2,2,1,2, + 0,0,2,0,1,1,2,1,0,0,1,0,1,1,0,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,0,2,2,2,1,1,2,2,2,0,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1, + 2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,0,0,2,2,1,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2, + 2,0,0,0,2,1,1,1,0,0,0,0,1,1,1,1,2,2,2,1,2,2,2,0,2,1,2,1,2,0,2,0, + 2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1,2,0,0,0,2,1,1,1, + 2,2,2,2,2,2,2,2,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,1,2,1,2,0,2,0,2,0,2,2,2,1,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,1,1,1,2,0,0,0, + 2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1, + 2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2, + 2,1,2,1,2,0,2,0,2,1,2,2,2,0,2,2,2,2,2,0,2,2,2,1,2,0,2,0,2,1,2,1, + 2,0,2,0,2,1,2,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2, + 2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,0,1,0,0,1,0,1,1, + 2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 0,0,0,0,1,1,1,1,0,0,0,0,1,1,1,1,2,2,1,2,2,2,0,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,1,2,2,1,0,2,0,2,2,2,1,2,2,2, + 2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2, + 2,0,2,0,2,1,2,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2, + 0,2,0,0,1,2,1,1,2,0,0,0,2,1,1,1,2,2,2,2,2,2,2,2,1,0,1,2,0,1,0,2, + 2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,1,2,2,2,0,2,2,1,1,2,2,0,0,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,1,2,1,2,0,2,0,2,1,2,2,2,0,2,2,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,1,2,2,2,0,2,2,2, + 2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1,2, + 0,0,0,0,1,1,1,1,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,2,0,2,2,2,1,2, + 2,0,2,0,2,1,2,1,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2, + 0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,1,2,2,2,0,1,1,2,1,0,0,2,0,2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2,2,2,0,2,2,2,1,2, + 2,0,2,0,2,1,2,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,1,2,2,2,0,2,2, + 0,2,0,0,1,2,1,1,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1,2, + 2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,0,2,1,1,1,2,0,0,2,2,2,1,2,2,2, + 2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1, + 0,0,2,2,1,1,2,2,0,2,1,2,1,2,0,2,2,1,2,1,2,0,2,0,1,2,1,2,0,2,0,2, + 2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1, + 2,2,0,0,2,2,1,1,2,2,0,0,2,2,1,1,2,2,2,2,2,2,2,2,2,2,0,0,2,2,1,1, + 2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,0,2,0,0,1,2,1,1, + 2,2,2,0,2,2,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,1,1,1,2,0,0,0,2, + 2,2,2,2,2,2,2,2,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2, + 2,0,2,0,2,1,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,0,0,2,1,1,1, + 2,0,2,2,2,1,2,2,0,2,2,2,1,2,2,2,2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2, + 2,0,2,0,2,1,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,0,2,0,2,1,2,1,2,1,2,0,2,0,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,0,2,0,2,1,2,1,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,1,2,1,2,0,2,0,2,2,1,2,1,2,0,2,0,2,2,2,2,2,2,2,2, + 2,0,2,1,2,1,2,0,0,2,1,2,1,2,0,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,0,2,0,2,1,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,0,2,0,2,1,2,1, + 2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,1,2,1,2,0,2,0,1,1,1,2,0,0,0,2,2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1, + 2,0,2,0,2,1,2,1,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, + 2,2,2,2,2,2,2,2,2,2,2,0,2,2,2,1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, +}; + + +/* + * Initialize the status struct for the encoder. + */ +void jbg_enc_init(struct jbg_enc_state *s, unsigned long x, unsigned long y, + int planes, unsigned char **p, + void (*data_out)(unsigned char *start, size_t len, + void *file), + void *file) +{ + unsigned long l, lx; + int i; + + assert(x > 0 && y > 0 && planes > 0 && planes < 256); + s->xd = x; + s->yd = y; + s->yd1 = y; /* This is the hight initially announced in BIH. To provoke + generation of NEWLEN for T.85 compatibility tests, + overwrite with new value s->yd1 > s->yd */ + s->planes = planes; + s->data_out = data_out; + s->file = file; + + s->d = 0; + s->dl = 0; + s->dh = s->d; + jbg_set_default_l0(s); + s->mx = 8; + s->my = 0; + s->order = JBG_ILEAVE | JBG_SMID; + s->options = JBG_TPBON | JBG_TPDON | JBG_DPON; + s->comment = NULL; + s->dppriv = jbg_dptable; + s->res_tab = jbg_resred; + + s->highres = (int *) checked_malloc(planes, sizeof(int)); + s->lhp[0] = p; + s->lhp[1] = (unsigned char **) + checked_malloc(planes, sizeof(unsigned char *)); + for (i = 0; i < planes; i++) { + s->highres[i] = 0; + s->lhp[1][i] = (unsigned char *) + checked_malloc(jbg_ceil_half(y, 1), jbg_ceil_half(x, 1+3)); + } + + s->free_list = NULL; + s->s = (struct jbg_arenc_state *) + checked_malloc(s->planes, sizeof(struct jbg_arenc_state)); + s->tx = (int *) checked_malloc(s->planes, sizeof(int)); + lx = jbg_ceil_half(x, 1); + s->tp = (char *) checked_malloc(lx, sizeof(char)); + for (l = 0; l < lx; s->tp[l++] = 2) ; + s->sde = NULL; + + return; +} + + +/* + * This function selects the number of differential layers based on + * the maximum size requested for the lowest resolution layer. If + * possible, a number of differential layers is selected, which will + * keep the size of the lowest resolution layer below or equal to the + * given width x and height y. However not more than 6 differential + * resolution layers will be used. In addition, a reasonable value for + * l0 (height of one stripe in the lowest resolution layer) is + * selected, which obeys the recommended limitations for l0 in annex A + * and C of the JBIG standard. The selected number of resolution layers + * is returned. + */ +int jbg_enc_lrlmax(struct jbg_enc_state *s, unsigned long x, + unsigned long y) +{ + for (s->d = 0; s->d < 6; s->d++) + if (jbg_ceil_half(s->xd, s->d) <= x && jbg_ceil_half(s->yd, s->d) <= y) + break; + s->dl = 0; + s->dh = s->d; + jbg_set_default_l0(s); + return s->d; +} + + +/* + * As an alternative to jbg_enc_lrlmax(), the following function allows + * to specify the number of layers directly. The stripe height and layer + * range is also adjusted automatically here. + */ +void jbg_enc_layers(struct jbg_enc_state *s, int d) +{ + if (d < 0 || d > 31) + return; + s->d = d; + s->dl = 0; + s->dh = s->d; + jbg_set_default_l0(s); + return; +} + + +/* + * Specify the highest and lowest resolution layers which will be + * written to the output file. Call this function not before + * jbg_enc_layers() or jbg_enc_lrlmax(), because these two functions + * reset the lowest and highest resolution layer to default values. + * Negative values are ignored. The total number of layers is returned. + */ +int jbg_enc_lrange(struct jbg_enc_state *s, int dl, int dh) +{ + if (dl >= 0 && dl <= s->d) s->dl = dl; + if (dh >= s->dl && dh <= s->d) s->dh = dh; + + return s->d; +} + + +/* + * The following function allows to specify the bits describing the + * options of the format as well as the maximum AT movement window and + * the number of layer 0 lines per stripes. + */ +void jbg_enc_options(struct jbg_enc_state *s, int order, int options, + unsigned long l0, int mx, int my) +{ + if (order >= 0 && order <= 0x0f) s->order = order; + if (options >= 0) s->options = options; + if (l0 > 0) s->l0 = l0; + if (mx >= 0 && my < 128) s->mx = mx; + if (my >= 0 && my < 256) s->my = my; + + return; +} + + +/* + * This function actually does all the tricky work involved in producing + * a SDE, which is stored in the appropriate s->sde[][][] element + * for later output in the correct order. + */ +static void encode_sde(struct jbg_enc_state *s, + long stripe, int layer, int plane) +{ + unsigned char *hp, *lp1, *lp2, *p0, *p1, *q1, *q2; + unsigned long hl, ll, hx, hy, lx, ly, hbpl, lbpl; + unsigned long line_h0 = 0, line_h1 = 0; + unsigned long line_h2, line_h3, line_l1, line_l2, line_l3; + struct jbg_arenc_state *se; + unsigned long y; /* current line number in highres image */ + unsigned long i; /* current line number within highres stripe */ + unsigned long j; /* current column number in highres image */ + long o; + unsigned a, p, t; + int ltp, ltp_old, cx; + unsigned long c_all, c[MX_MAX + 1], cmin, cmax, clmin, clmax; + int tmax, at_determined; + int new_tx; + long new_tx_line = -1; + int reset; + struct jbg_buf *new_jbg_buf; + +#ifdef DEBUG + static long tp_lines, tp_exceptions, tp_pixels, dp_pixels; + static long encoded_pixels; +#endif + + /* return immediately if this stripe has already been encoded */ + if (s->sde[stripe][layer][plane] != SDE_TODO) + return; + +#ifdef DEBUG + if (stripe == 0) + tp_lines = tp_exceptions = tp_pixels = dp_pixels = encoded_pixels = 0; + fprintf(stderr, "encode_sde: s/d/p = %2ld/%2d/%2d\n", + stripe, layer, plane); +#endif + + /* number of lines per stripe in highres image */ + hl = s->l0 << layer; + /* number of lines per stripe in lowres image */ + ll = hl >> 1; + /* current line number in highres image */ + y = stripe * hl; + /* number of pixels in highres image */ + hx = jbg_ceil_half(s->xd, s->d - layer); + hy = jbg_ceil_half(s->yd, s->d - layer); + /* number of pixels in lowres image */ + lx = jbg_ceil_half(hx, 1); + ly = jbg_ceil_half(hy, 1); + /* bytes per line in highres and lowres image */ + hbpl = jbg_ceil_half(hx, 3); + lbpl = jbg_ceil_half(lx, 3); + /* pointer to first image byte of highres stripe */ + hp = s->lhp[s->highres[plane]][plane] + stripe * hl * hbpl; + lp2 = s->lhp[1 - s->highres[plane]][plane] + stripe * ll * lbpl; + lp1 = lp2 + lbpl; + + /* check whether we can refer to any state of a previous stripe */ + reset = (stripe == 0) || (s->options & JBG_SDRST); + + /* initialize arithmetic encoder */ + se = s->s + plane; + arith_encode_init(se, !reset); + s->sde[stripe][layer][plane] = jbg_buf_init(&s->free_list); + se->byte_out = jbg_buf_write; + se->file = s->sde[stripe][layer][plane]; + + /* initialize adaptive template movement algorithm */ + c_all = 0; + for (t = 0; t <= s->mx; t++) + c[t] = 0; + if (stripe == 0) /* the SDRST case is handled at the end */ + s->tx[plane] = 0; + new_tx = -1; + at_determined = 0; /* we haven't yet decided the template move */ + if (s->mx == 0) + at_determined = 1; + + /* initialize typical prediction */ + ltp = 0; + if (reset) + ltp_old = 0; + else { + ltp_old = 1; + p1 = hp - hbpl; + if (y > 1) { + q1 = p1 - hbpl; + while (p1 < hp && (ltp_old = (*p1++ == *q1++)) != 0) ; + } else + while (p1 < hp && (ltp_old = (*p1++ == 0)) != 0) ; + } + + if (layer == 0) { + + /* + * Encode lowest resolution layer + */ + + for (i = 0; i < hl && y < hy; i++, y++) { + + /* check whether it is worth to perform an ATMOVE */ + if (!at_determined && c_all > 2048) { + cmin = clmin = 0xffffffffL; + cmax = clmax = 0; + tmax = 0; + for (t = (s->options & JBG_LRLTWO) ? 5 : 3; t <= s->mx; t++) { + if (c[t] > cmax) cmax = c[t]; + if (c[t] < cmin) cmin = c[t]; + if (c[t] > c[tmax]) tmax = t; + } + clmin = (c[0] < cmin) ? c[0] : cmin; + clmax = (c[0] > cmax) ? c[0] : cmax; + if (c_all - cmax < (c_all >> 3) && + cmax - c[s->tx[plane]] > c_all - cmax && + cmax - c[s->tx[plane]] > (c_all >> 4) && + /* ^ T.82 said < here, fixed in Cor.1/25 */ + cmax - (c_all - c[s->tx[plane]]) > c_all - cmax && + cmax - (c_all - c[s->tx[plane]]) > (c_all >> 4) && + cmax - cmin > (c_all >> 2) && + (s->tx[plane] || clmax - clmin > (c_all >> 3))) { + /* we have decided to perform an ATMOVE */ + new_tx = tmax; + if (!(s->options & JBG_DELAY_AT)) { + new_tx_line = i; + s->tx[plane] = new_tx; + } +#ifdef DEBUG + fprintf(stderr, "ATMOVE: line=%ld, tx=%d, c_all=%ld\n", + i, new_tx, c_all); +#endif + } + at_determined = 1; + } + assert(s->tx[plane] >= 0); /* i.e., tx can safely be cast to unsigned */ + + /* typical prediction */ + if (s->options & JBG_TPBON) { + ltp = 1; + p1 = hp; + if (i > 0 || !reset) { + q1 = hp - hbpl; + while (q1 < hp && (ltp = (*p1++ == *q1++)) != 0) ; + } else + while (p1 < hp + hbpl && (ltp = (*p1++ == 0)) != 0) ; + arith_encode(se, (s->options & JBG_LRLTWO) ? TPB2CX : TPB3CX, + ltp == ltp_old); +#ifdef DEBUG + tp_lines += ltp; +#endif + ltp_old = ltp; + if (ltp) { + /* skip next line */ + hp += hbpl; + continue; + } + } + + /* + * Layout of the variables line_h1, line_h2, line_h3, which contain + * as bits the neighbour pixels of the currently coded pixel X: + * + * 76543210765432107654321076543210 line_h3 + * 76543210765432107654321076543210 line_h2 + * 76543210765432107654321X76543210 line_h1 + */ + + line_h1 = line_h2 = line_h3 = 0; + if (i > 0 || !reset) line_h2 = (long)*(hp - hbpl) << 8; + if (i > 1 || !reset) line_h3 = (long)*(hp - hbpl - hbpl) << 8; + + /* encode line */ + for (j = 0; j < hx; hp++) { + line_h1 |= *hp; + if (j < hbpl * 8 - 8 && (i > 0 || !reset)) { + line_h2 |= *(hp - hbpl + 1); + if (i > 1 || !reset) + line_h3 |= *(hp - hbpl - hbpl + 1); + } + if (s->options & JBG_LRLTWO) { + /* two line template */ + do { + line_h1 <<= 1; line_h2 <<= 1; line_h3 <<= 1; + if (s->tx[plane]) { + if ((unsigned) s->tx[plane] > j) + a = 0; + else { + o = (j - s->tx[plane]) - (j & ~7L); + a = (hp[o >> 3] >> (7 - (o & 7))) & 1; + a <<= 4; + } + assert(s->tx[plane] > 23 || + a == ((line_h1 >> (4 + s->tx[plane])) & 0x010)); + arith_encode(se, (((line_h2 >> 10) & 0x3e0) | a | + ((line_h1 >> 9) & 0x00f)), + (line_h1 >> 8) & 1); + } + else + arith_encode(se, (((line_h2 >> 10) & 0x3f0) | + ((line_h1 >> 9) & 0x00f)), + (line_h1 >> 8) & 1); +#ifdef DEBUG + encoded_pixels++; +#endif + /* statistics for adaptive template changes */ + if (!at_determined && j >= s->mx && j < hx-2) { + p = (line_h1 & 0x100) != 0; /* current pixel value */ + c[0] += ((line_h2 & 0x4000) != 0) == p; /* default position */ + assert(!(((line_h2 >> 6) ^ line_h1) & 0x100) == + (((line_h2 & 0x4000) != 0) == p)); + for (t = 5; t <= s->mx && t <= j; t++) { + o = (j - t) - (j & ~7L); + a = (hp[o >> 3] >> (7 - (o & 7))) & 1; + assert(t > 23 || + (a == p) == !(((line_h1 >> t) ^ line_h1) & 0x100)); + c[t] += a == p; + } + for (; t <= s->mx; t++) { + c[t] += 0 == p; + } + ++c_all; + } + } while (++j & 7 && j < hx); + } else { + /* three line template */ + do { + line_h1 <<= 1; line_h2 <<= 1; line_h3 <<= 1; + if (s->tx[plane]) { + if ((unsigned) s->tx[plane] > j) + a = 0; + else { + o = (j - s->tx[plane]) - (j & ~7L); + a = (hp[o >> 3] >> (7 - (o & 7))) & 1; + a <<= 2; + } + assert(s->tx[plane] > 23 || + a == ((line_h1 >> (6 + s->tx[plane])) & 0x004)); + arith_encode(se, (((line_h3 >> 8) & 0x380) | + ((line_h2 >> 12) & 0x078) | a | + ((line_h1 >> 9) & 0x003)), + (line_h1 >> 8) & 1); + } else + arith_encode(se, (((line_h3 >> 8) & 0x380) | + ((line_h2 >> 12) & 0x07c) | + ((line_h1 >> 9) & 0x003)), + (line_h1 >> 8) & 1); +#ifdef DEBUG + encoded_pixels++; +#endif + /* statistics for adaptive template changes */ + if (!at_determined && j >= s->mx && j < hx-2) { + p = (line_h1 & 0x100) != 0; /* current pixel value */ + c[0] += ((line_h2 & 0x4000) != 0) == p; /* default position */ + assert(!(((line_h2 >> 6) ^ line_h1) & 0x100) == + (((line_h2 & 0x4000) != 0) == p)); + for (t = 3; t <= s->mx && t <= j; t++) { + o = (j - t) - (j & ~7L); + a = (hp[o >> 3] >> (7 - (o & 7))) & 1; + assert(t > 23 || + (a == p) == !(((line_h1 >> t) ^ line_h1) & 0x100)); + c[t] += a == p; + } + for (; t <= s->mx; t++) { + c[t] += 0 == p; + } + ++c_all; + } + } while (++j & 7 && j < hx); + } /* if (s->options & JBG_LRLTWO) */ + } /* for (j = ...) */ + } /* for (i = ...) */ + + } else { + + /* + * Encode differential layer + */ + + for (i = 0; i < hl && y < hy; i++, y++) { + + /* check whether it is worth to perform an ATMOVE */ + if (!at_determined && c_all > 2048) { + cmin = clmin = 0xffffffffL; + cmax = clmax = 0; + tmax = 0; + for (t = 3; t <= s->mx; t++) { + if (c[t] > cmax) cmax = c[t]; + if (c[t] < cmin) cmin = c[t]; + if (c[t] > c[tmax]) tmax = t; + } + clmin = (c[0] < cmin) ? c[0] : cmin; + clmax = (c[0] > cmax) ? c[0] : cmax; + if (c_all - cmax < (c_all >> 3) && + cmax - c[s->tx[plane]] > c_all - cmax && + cmax - c[s->tx[plane]] > (c_all >> 4) && + /* ^ T.82 said < here, fixed in Cor.1/25 */ + cmax - (c_all - c[s->tx[plane]]) > c_all - cmax && + cmax - (c_all - c[s->tx[plane]]) > (c_all >> 4) && + cmax - cmin > (c_all >> 2) && + (s->tx[plane] || clmax - clmin > (c_all >> 3))) { + /* we have decided to perform an ATMOVE */ + new_tx = tmax; + if (!(s->options & JBG_DELAY_AT)) { + new_tx_line = i; + s->tx[plane] = new_tx; + } +#ifdef DEBUG + fprintf(stderr, "ATMOVE: line=%ld, tx=%d, c_all=%ld\n", + i, new_tx, c_all); +#endif + } + at_determined = 1; + } + + if ((i >> 1) >= ll - 1 || (y >> 1) >= ly - 1) + lp1 = lp2; + + /* typical prediction */ + if (s->options & JBG_TPDON && (i & 1) == 0) { + q1 = lp1; q2 = lp2; + p0 = p1 = hp; + if (i < hl - 1 && y < hy - 1) + p0 = hp + hbpl; + if (i > 1 || !reset) + line_l3 = (long)*(q2 - lbpl) << 8; + else + line_l3 = 0; + line_l2 = (long)*q2 << 8; + line_l1 = (long)*q1 << 8; + ltp = 1; + for (j = 0; j < lx && ltp; q1++, q2++) { + if (j < lbpl * 8 - 8) { + if (i > 1 || !reset) + line_l3 |= *(q2 - lbpl + 1); + line_l2 |= *(q2 + 1); + line_l1 |= *(q1 + 1); + } + do { + if ((j >> 2) < hbpl) { + line_h1 = *(p1++); + line_h0 = *(p0++); + } + do { + line_l3 <<= 1; + line_l2 <<= 1; + line_l1 <<= 1; + line_h1 <<= 2; + line_h0 <<= 2; + cx = (((line_l3 >> 15) & 0x007) | + ((line_l2 >> 12) & 0x038) | + ((line_l1 >> 9) & 0x1c0)); + if (cx == 0x000) + if ((line_h1 & 0x300) == 0 && (line_h0 & 0x300) == 0) + s->tp[j] = 0; + else { + ltp = 0; +#ifdef DEBUG + tp_exceptions++; +#endif + } + else if (cx == 0x1ff) + if ((line_h1 & 0x300) == 0x300 && (line_h0 & 0x300) == 0x300) + s->tp[j] = 1; + else { + ltp = 0; +#ifdef DEBUG + tp_exceptions++; +#endif + } + else + s->tp[j] = 2; + } while (++j & 3 && j < lx); + } while (j & 7 && j < lx); + } /* for (j = ...) */ + arith_encode(se, TPDCX, !ltp); +#ifdef DEBUG + tp_lines += ltp; +#endif + } + + + /* + * Layout of the variables line_h1, line_h2, line_h3, which contain + * as bits the high resolution neighbour pixels of the currently coded + * highres pixel X: + * + * 76543210 76543210 76543210 76543210 line_h3 + * 76543210 76543210 76543210 76543210 line_h2 + * 76543210 76543210 7654321X 76543210 line_h1 + * + * Layout of the variables line_l1, line_l2, line_l3, which contain + * the low resolution pixels near the currently coded pixel as bits. + * The lowres pixel in which the currently coded highres pixel is + * located is marked as Y: + * + * 76543210 76543210 76543210 76543210 line_l3 + * 76543210 7654321Y 76543210 76543210 line_l2 + * 76543210 76543210 76543210 76543210 line_l1 + */ + + + line_h1 = line_h2 = line_h3 = line_l1 = line_l2 = line_l3 = 0; + if (i > 0 || !reset) line_h2 = (long)*(hp - hbpl) << 8; + if (i > 1 || !reset) { + line_h3 = (long)*(hp - hbpl - hbpl) << 8; + line_l3 = (long)*(lp2 - lbpl) << 8; + } + line_l2 = (long)*lp2 << 8; + line_l1 = (long)*lp1 << 8; + + /* encode line */ + for (j = 0; j < hx; lp1++, lp2++) { + if ((j >> 1) < lbpl * 8 - 8) { + if (i > 1 || !reset) + line_l3 |= *(lp2 - lbpl + 1); + line_l2 |= *(lp2 + 1); + line_l1 |= *(lp1 + 1); + } + do { /* ... while (j & 15 && j < hx) */ + + assert(hp - (s->lhp[s->highres[plane]][plane] + + (stripe * hl + i) * hbpl) + == (ptrdiff_t) j >> 3); + + assert(lp2 - (s->lhp[1-s->highres[plane]][plane] + + (stripe * ll + (i>>1)) * lbpl) + == (ptrdiff_t) j >> 4); + + line_h1 |= *hp; + if (j < hbpl * 8 - 8) { + if (i > 0 || !reset) { + line_h2 |= *(hp - hbpl + 1); + if (i > 1 || !reset) + line_h3 |= *(hp - hbpl - hbpl + 1); + } + } + do { /* ... while (j & 7 && j < hx) */ + line_l1 <<= 1; line_l2 <<= 1; line_l3 <<= 1; + if (ltp && s->tp[j >> 1] < 2) { + /* pixel are typical and have not to be encoded */ + line_h1 <<= 2; line_h2 <<= 2; line_h3 <<= 2; +#ifdef DEBUG + do { + ++tp_pixels; + } while (++j & 1 && j < hx); +#else + j += 2; +#endif + } else + do { /* ... while (++j & 1 && j < hx) */ + line_h1 <<= 1; line_h2 <<= 1; line_h3 <<= 1; + + /* deterministic prediction */ + if (s->options & JBG_DPON) { + if ((y & 1) == 0) { + if ((j & 1) == 0) { + /* phase 0 */ + if (s->dppriv[((line_l3 >> 16) & 0x003) | + ((line_l2 >> 14) & 0x00c) | + ((line_h1 >> 5) & 0x010) | + ((line_h2 >> 10) & 0x0e0)] < 2) { +#ifdef DEBUG + ++dp_pixels; +#endif + continue; + } + } else { + /* phase 1 */ + if (s->dppriv[(((line_l3 >> 16) & 0x003) | + ((line_l2 >> 14) & 0x00c) | + ((line_h1 >> 5) & 0x030) | + ((line_h2 >> 10) & 0x1c0)) + 256] < 2) { +#ifdef DEBUG + ++dp_pixels; +#endif + continue; + } + } + } else { + if ((j & 1) == 0) { + /* phase 2 */ + if (s->dppriv[(((line_l3 >> 16) & 0x003) | + ((line_l2 >> 14) & 0x00c) | + ((line_h1 >> 5) & 0x010) | + ((line_h2 >> 10) & 0x0e0) | + ((line_h3 >> 7) & 0x700)) + 768] < 2) { +#ifdef DEBUG + ++dp_pixels; +#endif + continue; + } + } else { + /* phase 3 */ + if (s->dppriv[(((line_l3 >> 16) & 0x003) | + ((line_l2 >> 14) & 0x00c) | + ((line_h1 >> 5) & 0x030) | + ((line_h2 >> 10) & 0x1c0) | + ((line_h3 >> 7) & 0xe00)) + 2816] < 2) { +#ifdef DEBUG + ++dp_pixels; +#endif + continue; + } + } + } + } + + /* determine context */ + if (s->tx[plane]) { + if ((unsigned) s->tx[plane] > j) + a = 0; + else { + o = (j - s->tx[plane]) - (j & ~7L); + a = (hp[o >> 3] >> (7 - (o & 7))) & 1; + a <<= 4; + } + assert(s->tx[plane] > 23 || + a == ((line_h1 >> (4 + s->tx[plane])) & 0x010)); + cx = (((line_h1 >> 9) & 0x003) | a | + ((line_h2 >> 13) & 0x00c) | + ((line_h3 >> 11) & 0x020)); + } else + cx = (((line_h1 >> 9) & 0x003) | + ((line_h2 >> 13) & 0x01c) | + ((line_h3 >> 11) & 0x020)); + if (j & 1) + cx |= (((line_l2 >> 9) & 0x0c0) | + ((line_l1 >> 7) & 0x300)) | (1UL << 10); + else + cx |= (((line_l2 >> 10) & 0x0c0) | + ((line_l1 >> 8) & 0x300)); + cx |= (y & 1) << 11; + + arith_encode(se, cx, (line_h1 >> 8) & 1); +#ifdef DEBUG + encoded_pixels++; +#endif + + /* statistics for adaptive template changes */ + if (!at_determined && j >= s->mx) { + c[0] += !(((line_h2 >> 6) ^ line_h1) & 0x100); + for (t = 3; t <= s->mx; t++) + c[t] += !(((line_h1 >> t) ^ line_h1) & 0x100); + ++c_all; + } + + } while (++j & 1 && j < hx); + } while (j & 7 && j < hx); + hp++; + } while (j & 15 && j < hx); + } /* for (j = ...) */ + + /* low resolution pixels are used twice */ + if ((i & 1) == 0) { + lp1 -= lbpl; + lp2 -= lbpl; + } + + } /* for (i = ...) */ + } + + arith_encode_flush(se); + jbg_buf_remove_zeros(s->sde[stripe][layer][plane]); + jbg_buf_write(MARKER_ESC, s->sde[stripe][layer][plane]); + jbg_buf_write((s->options & JBG_SDRST) ? MARKER_SDRST : MARKER_SDNORM, + s->sde[stripe][layer][plane]); + if (s->options & JBG_SDRST) + s->tx[plane] = 0; + + /* add ATMOVE */ + if (new_tx != -1) { + if (s->options & JBG_DELAY_AT) { + /* ATMOVE will become active at the first line of the next stripe */ + s->tx[plane] = new_tx; + jbg_buf_write(MARKER_ESC, s->sde[stripe][layer][plane]); + jbg_buf_write(MARKER_ATMOVE, s->sde[stripe][layer][plane]); + jbg_buf_write(0, s->sde[stripe][layer][plane]); + jbg_buf_write(0, s->sde[stripe][layer][plane]); + jbg_buf_write(0, s->sde[stripe][layer][plane]); + jbg_buf_write(0, s->sde[stripe][layer][plane]); + jbg_buf_write(s->tx[plane], s->sde[stripe][layer][plane]); + jbg_buf_write(0, s->sde[stripe][layer][plane]); + } else { + /* ATMOVE has already become active during this stripe + * => we have to prefix the SDE data with an ATMOVE marker */ + new_jbg_buf = jbg_buf_init(&s->free_list); + jbg_buf_write(MARKER_ESC, new_jbg_buf); + jbg_buf_write(MARKER_ATMOVE, new_jbg_buf); + jbg_buf_write((new_tx_line >> 24) & 0xff, new_jbg_buf); + jbg_buf_write((new_tx_line >> 16) & 0xff, new_jbg_buf); + jbg_buf_write((new_tx_line >> 8) & 0xff, new_jbg_buf); + jbg_buf_write(new_tx_line & 0xff, new_jbg_buf); + jbg_buf_write(new_tx, new_jbg_buf); + jbg_buf_write(0, new_jbg_buf); + jbg_buf_prefix(new_jbg_buf, &s->sde[stripe][layer][plane]); + } + } + +#if 0 + if (stripe == s->stripes - 1) + fprintf(stderr, "tp_lines = %ld, tp_exceptions = %ld, tp_pixels = %ld, " + "dp_pixels = %ld, encoded_pixels = %ld\n", + tp_lines, tp_exceptions, tp_pixels, dp_pixels, encoded_pixels); +#endif + + return; +} + + +/* + * Create the next lower resolution version of an image + */ +static void resolution_reduction(struct jbg_enc_state *s, int plane, + int higher_layer) +{ + unsigned long hl, ll, hx, hy, lx, ly, hbpl, lbpl; + unsigned char *hp1, *hp2, *hp3, *lp; + unsigned long line_h1, line_h2, line_h3, line_l2; + unsigned long y; /* current line number in lowres image */ + unsigned long i; /* current line number within lowres stripe */ + unsigned long j; /* current column number in lowres image */ + int pix, k, l; + + /* number of lines per stripe in highres image */ + hl = s->l0 << higher_layer; + /* number of lines per stripe in lowres image */ + ll = hl >> 1; + /* number of pixels in highres image */ + hx = jbg_ceil_half(s->xd, s->d - higher_layer); + hy = jbg_ceil_half(s->yd, s->d - higher_layer); + /* number of pixels in lowres image */ + lx = jbg_ceil_half(hx, 1); + ly = jbg_ceil_half(hy, 1); + /* bytes per line in highres and lowres image */ + hbpl = jbg_ceil_half(hx, 3); + lbpl = jbg_ceil_half(lx, 3); + /* pointers to first image bytes */ + hp2 = s->lhp[s->highres[plane]][plane]; + hp1 = hp2 + hbpl; + hp3 = hp2 - hbpl; + lp = s->lhp[1 - s->highres[plane]][plane]; + +#ifdef DEBUG + fprintf(stderr, "resolution_reduction: plane = %d, higher_layer = %d\n", + plane, higher_layer); +#endif + + /* + * Layout of the variables line_h1, line_h2, line_h3, which contain + * as bits the high resolution neighbour pixels of the currently coded + * lowres pixel /\: + * \/ + * + * 76543210 76543210 76543210 76543210 line_h3 + * 76543210 76543210 765432/\ 76543210 line_h2 + * 76543210 76543210 765432\/ 76543210 line_h1 + * + * Layout of the variable line_l2, which contains the low resolution + * pixels near the currently coded pixel as bits. The lowres pixel + * which is currently coded is marked as X: + * + * 76543210 76543210 76543210 76543210 line_l2 + * X + */ + + for (y = 0; y < ly;) { + for (i = 0; i < ll && y < ly; i++, y++) { + if (2*y + 1 >= hy) + hp1 = hp2; + pix = 0; + line_h1 = line_h2 = line_h3 = line_l2 = 0; + for (j = 0; j < lbpl * 8; j += 8) { + *lp = 0; + if (i > 0 || (y > 0 && !(s->options & JBG_SDRST))) + line_l2 |= *(lp-lbpl); + for (k = 0; k < 8 && j + k < lx; k += 4) { + if (((j + k) >> 2) < hbpl) { + if (i > 0 || (y > 0 && !(s->options & JBG_SDRST))) + line_h3 |= *hp3; + ++hp3; + line_h2 |= *(hp2++); + line_h1 |= *(hp1++); + } + for (l = 0; l < 4 && j + k + l < lx; l++) { + line_h3 <<= 2; + line_h2 <<= 2; + line_h1 <<= 2; + line_l2 <<= 1; + pix = s->res_tab[((line_h1 >> 8) & 0x007) | + ((line_h2 >> 5) & 0x038) | + ((line_h3 >> 2) & 0x1c0) | + (pix << 9) | ((line_l2 << 2) & 0xc00)]; + *lp = (*lp << 1) | pix; + } + } + ++lp; + } + *(lp - 1) <<= lbpl * 8 - lx; + hp1 += hbpl; + hp2 += hbpl; + hp3 += hbpl; + } + } + +#ifdef DEBUG + { + FILE *f; + char fn[50]; + + sprintf(fn, "dbg_d=%02d.pbm", higher_layer - 1); + f = fopen(fn, "wb"); + fprintf(f, "P4\n%lu %lu\n", lx, ly); + fwrite(s->lhp[1 - s->highres[plane]][plane], 1, lbpl * ly, f); + fclose(f); + } +#endif + + return; +} + + +/* + * This function is called inside the three loops of jbg_enc_out() in + * order to write the next SDE. It has first to generate the required + * SDE and all SDEs which have to be encoded before this SDE can be + * created. The problem here is that if we want to output a lower + * resolution layer, we have to apply the resolution reduction + * algorithm first to get it. As we try to safe as much memory as + * possible, the resolution reduction will overwrite previous higher + * resolution bitmaps. Consequently, we have to encode and buffer SDEs + * which depend on higher resolution layers before we can start the + * resolution reduction. All the logic about which SDE has to be + * encoded before resolution reduction is allowed is handled + * here. This approach may be a bit more complex than alternative ways + * of doing it, but it minimizes the amount of temporary memory used. + */ +static void output_sde(struct jbg_enc_state *s, + unsigned long stripe, int layer, int plane) +{ + int lfcl; /* lowest fully coded layer */ + long i; + unsigned long u; + + assert(s->sde[stripe][layer][plane] != SDE_DONE); + + if (s->sde[stripe][layer][plane] != SDE_TODO) { +#ifdef DEBUG + fprintf(stderr, "writing SDE: s/d/p = %2lu/%2d/%2d\n", + stripe, layer, plane); +#endif + jbg_buf_output(&s->sde[stripe][layer][plane], s->data_out, s->file); + s->sde[stripe][layer][plane] = SDE_DONE; + return; + } + + /* Determine the smallest resolution layer in this plane for which + * not yet all stripes have been encoded into SDEs. This layer will + * have to be completely coded, before we can apply the next + * resolution reduction step. */ + lfcl = 0; + for (i = s->d; i >= 0; i--) + if (s->sde[s->stripes - 1][i][plane] == SDE_TODO) { + lfcl = i + 1; + break; + } + if (lfcl > s->d && s->d > 0 && stripe == 0) { + /* perform the first resolution reduction */ + resolution_reduction(s, plane, s->d); + } + /* In case HITOLO is not used, we have to encode and store the higher + * resolution layers first, although we do not need them right now. */ + while (lfcl - 1 > layer) { + for (u = 0; u < s->stripes; u++) + encode_sde(s, u, lfcl - 1, plane); + --lfcl; + s->highres[plane] ^= 1; + if (lfcl > 1) + resolution_reduction(s, plane, lfcl - 1); + } + + encode_sde(s, stripe, layer, plane); + +#ifdef DEBUG + fprintf(stderr, "writing SDE: s/d/p = %2lu/%2d/%2d\n", stripe, layer, plane); +#endif + jbg_buf_output(&s->sde[stripe][layer][plane], s->data_out, s->file); + s->sde[stripe][layer][plane] = SDE_DONE; + + if (stripe == s->stripes - 1 && layer > 0 && + s->sde[0][layer-1][plane] == SDE_TODO) { + s->highres[plane] ^= 1; + if (layer > 1) + resolution_reduction(s, plane, layer - 1); + } + + return; +} + + +/* + * Convert the table which controls the deterministic prediction + * process from the internal format into the representation required + * for the 1728 byte long DPTABLE element of a BIH. + * + * The bit order of the DPTABLE format (see also ITU-T T.82 figure 13) is + * + * high res: 4 5 6 low res: 0 1 + * 7 8 9 2 3 + * 10 11 12 + * + * were 4 table entries are packed into one byte, while we here use + * internally an unpacked 6912 byte long table indexed by the following + * bit order: + * + * high res: 7 6 5 high res: 8 7 6 low res: 1 0 + * (phase 0) 4 . . (phase 1) 5 4 . 3 2 + * . . . . . . + * + * high res: 10 9 8 high res: 11 10 9 + * (phase 2) 7 6 5 (phase 3) 8 7 6 + * 4 . . 5 4 . + */ +void jbg_int2dppriv(unsigned char *dptable, const char *internal) +{ + int i, j, k; + int trans0[ 8] = { 1, 0, 3, 2, 7, 6, 5, 4 }; + int trans1[ 9] = { 1, 0, 3, 2, 8, 7, 6, 5, 4 }; + int trans2[11] = { 1, 0, 3, 2, 10, 9, 8, 7, 6, 5, 4 }; + int trans3[12] = { 1, 0, 3, 2, 11, 10, 9, 8, 7, 6, 5, 4 }; + + for (i = 0; i < 1728; dptable[i++] = 0) ; + +#define FILL_TABLE1(offset, len, trans) \ + for (i = 0; i < len; i++) { \ + k = 0; \ + for (j = 0; i >> j; j++) \ + k |= ((i >> j) & 1) << trans[j]; \ + dptable[(i + offset) >> 2] |= \ + (internal[k + offset] & 3) << ((3 - (i&3)) << 1); \ + } + + FILL_TABLE1( 0, 256, trans0); + FILL_TABLE1( 256, 512, trans1); + FILL_TABLE1( 768, 2048, trans2); + FILL_TABLE1(2816, 4096, trans3); + + return; +} + + +/* + * Convert the table which controls the deterministic prediction + * process from the 1728 byte long DPTABLE format into the 6912 byte long + * internal format. + */ +void jbg_dppriv2int(char *internal, const unsigned char *dptable) +{ + int i, j, k; + int trans0[ 8] = { 1, 0, 3, 2, 7, 6, 5, 4 }; + int trans1[ 9] = { 1, 0, 3, 2, 8, 7, 6, 5, 4 }; + int trans2[11] = { 1, 0, 3, 2, 10, 9, 8, 7, 6, 5, 4 }; + int trans3[12] = { 1, 0, 3, 2, 11, 10, 9, 8, 7, 6, 5, 4 }; + +#define FILL_TABLE2(offset, len, trans) \ + for (i = 0; i < len; i++) { \ + k = 0; \ + for (j = 0; i >> j; j++) \ + k |= ((i >> j) & 1) << trans[j]; \ + internal[k + offset] = \ + (dptable[(i + offset) >> 2] >> ((3 - (i & 3)) << 1)) & 3; \ + } + + FILL_TABLE2( 0, 256, trans0); + FILL_TABLE2( 256, 512, trans1); + FILL_TABLE2( 768, 2048, trans2); + FILL_TABLE2(2816, 4096, trans3); + + return; +} + + +/* + * Encode one full BIE and pass the generated data to the specified + * call-back function + */ +void jbg_enc_out(struct jbg_enc_state *s) +{ + unsigned long bpl; + unsigned char buf[20]; + unsigned long xd, yd, y; + long ii[3], is[3], ie[3]; /* generic variables for the 3 nested loops */ + unsigned long stripe; + int layer, plane; + int order; + unsigned char dpbuf[1728]; + + /* some sanity checks */ + s->order &= JBG_HITOLO | JBG_SEQ | JBG_ILEAVE | JBG_SMID; + order = s->order & (JBG_SEQ | JBG_ILEAVE | JBG_SMID); + if (iindex[order][0] < 0) + s->order = order = JBG_SMID | JBG_ILEAVE; + if (s->options & JBG_DPON && s->dppriv != jbg_dptable) + s->options |= JBG_DPPRIV; + if (s->mx > MX_MAX) + s->mx = MX_MAX; + s->my = 0; + if (s->mx && s->mx < ((s->options & JBG_LRLTWO) ? 5U : 3U)) + s->mx = 0; + if (s->d > 255 || s->d < 0 || s->dh > s->d || s->dh < 0 || + s->dl < 0 || s->dl > s->dh || s->planes < 0 || s->planes > 255) + return; + /* prevent uint32 overflow: s->l0 * 2 ^ s->d < 2 ^ 32 */ + if (s->d > 31 || (s->d != 0 && s->l0 >= (1UL << (32 - s->d)))) + return; + if (s->yd1 < s->yd) + s->yd1 = s->yd; + if (s->yd1 > s->yd) + s->options |= JBG_VLENGTH; + + /* ensure correct zero padding of bitmap at the final byte of each line */ + if (s->xd & 7) { + bpl = jbg_ceil_half(s->xd, 3); /* bytes per line */ + for (plane = 0; plane < s->planes; plane++) + for (y = 0; y < s->yd; y++) + s->lhp[0][plane][y * bpl + bpl - 1] &= ~((1 << (8 - (s->xd & 7))) - 1); + } + + /* prepare BIH */ + buf[0] = s->dl; + buf[1] = s->dh; + buf[2] = s->planes; + buf[3] = 0; + xd = jbg_ceil_half(s->xd, s->d - s->dh); + yd = jbg_ceil_half(s->yd1, s->d - s->dh); + buf[4] = xd >> 24; + buf[5] = (xd >> 16) & 0xff; + buf[6] = (xd >> 8) & 0xff; + buf[7] = xd & 0xff; + buf[8] = yd >> 24; + buf[9] = (yd >> 16) & 0xff; + buf[10] = (yd >> 8) & 0xff; + buf[11] = yd & 0xff; + buf[12] = s->l0 >> 24; + buf[13] = (s->l0 >> 16) & 0xff; + buf[14] = (s->l0 >> 8) & 0xff; + buf[15] = s->l0 & 0xff; + buf[16] = s->mx; + buf[17] = s->my; + buf[18] = s->order; + buf[19] = s->options & 0x7f; + +#if 0 + /* sanitize L0 (if it was set to 0xffffffff for T.85-style NEWLEN tests) */ + if (s->l0 > (s->yd >> s->d)) + s->l0 = s->yd >> s->d; +#endif + + /* calculate number of stripes that will be required */ + s->stripes = jbg_stripes(s->l0, s->yd, s->d); + + /* allocate buffers for SDE pointers */ + if (s->sde == NULL) { + s->sde = (struct jbg_buf ****) + checked_malloc(s->stripes, sizeof(struct jbg_buf ***)); + for (stripe = 0; stripe < s->stripes; stripe++) { + s->sde[stripe] = (struct jbg_buf ***) + checked_malloc(s->d + 1, sizeof(struct jbg_buf **)); + for (layer = 0; layer < s->d + 1; layer++) { + s->sde[stripe][layer] = (struct jbg_buf **) + checked_malloc(s->planes, sizeof(struct jbg_buf *)); + for (plane = 0; plane < s->planes; plane++) + s->sde[stripe][layer][plane] = SDE_TODO; + } + } + } + + /* output BIH */ + s->data_out(buf, 20, s->file); + if ((s->options & (JBG_DPON | JBG_DPPRIV | JBG_DPLAST)) == + (JBG_DPON | JBG_DPPRIV)) { + /* write private table */ + jbg_int2dppriv(dpbuf, s->dppriv); + s->data_out(dpbuf, 1728, s->file); + } + +#if 0 + /* + * Encode everything first. This is a simple-minded alternative to + * all the tricky on-demand encoding logic in output_sde() for + * debugging purposes. + */ + for (layer = s->dh; layer >= s->dl; layer--) { + for (plane = 0; plane < s->planes; plane++) { + if (layer > 0) + resolution_reduction(s, plane, layer); + for (stripe = 0; stripe < s->stripes; stripe++) + encode_sde(s, stripe, layer, plane); + s->highres[plane] ^= 1; + } + } +#endif + + /* + * Generic loops over all SDEs. Which loop represents layer, plane and + * stripe depends on the option flags. + */ + + /* start and end value for each loop */ + is[iindex[order][STRIPE]] = 0; + ie[iindex[order][STRIPE]] = s->stripes - 1; + is[iindex[order][LAYER]] = s->dl; + ie[iindex[order][LAYER]] = s->dh; + is[iindex[order][PLANE]] = 0; + ie[iindex[order][PLANE]] = s->planes - 1; + + for (ii[0] = is[0]; ii[0] <= ie[0]; ii[0]++) + for (ii[1] = is[1]; ii[1] <= ie[1]; ii[1]++) + for (ii[2] = is[2]; ii[2] <= ie[2]; ii[2]++) { + + stripe = ii[iindex[order][STRIPE]]; + if (s->order & JBG_HITOLO) + layer = s->dh - (ii[iindex[order][LAYER]] - s->dl); + else + layer = ii[iindex[order][LAYER]]; + plane = ii[iindex[order][PLANE]]; + + /* output comment marker segment if there is any pending */ + if (s->comment) { + buf[0] = MARKER_ESC; + buf[1] = MARKER_COMMENT; + buf[2] = s->comment_len >> 24; + buf[3] = (s->comment_len >> 16) & 0xff; + buf[4] = (s->comment_len >> 8) & 0xff; + buf[5] = s->comment_len & 0xff; + s->data_out(buf, 6, s->file); + s->data_out(s->comment, s->comment_len, s->file); + s->comment = NULL; + } + + output_sde(s, stripe, layer, plane); + + /* + * When we generate a NEWLEN test case (s->yd1 > s->yd), output + * NEWLEN after last stripe if we have only a single + * resolution layer or plane (see ITU-T T.85 profile), otherwise + * output NEWLEN before last stripe. + */ + if (s->yd1 > s->yd && + (stripe == s->stripes - 1 || + (stripe == s->stripes - 2 && + (s->dl != s->dh || s->planes > 1)))) { + s->yd1 = s->yd; + yd = jbg_ceil_half(s->yd, s->d - s->dh); + buf[0] = MARKER_ESC; + buf[1] = MARKER_NEWLEN; + buf[2] = yd >> 24; + buf[3] = (yd >> 16) & 0xff; + buf[4] = (yd >> 8) & 0xff; + buf[5] = yd & 0xff; + s->data_out(buf, 6, s->file); +#ifdef DEBUG + fprintf(stderr, "NEWLEN: yd=%lu\n", yd); +#endif + if (stripe == s->stripes - 1) { + buf[1] = MARKER_SDNORM; + s->data_out(buf, 2, s->file); + } + } + + } + + return; +} + + +void jbg_enc_free(struct jbg_enc_state *s) +{ + unsigned long stripe; + int layer, plane; + +#ifdef DEBUG + fprintf(stderr, "jbg_enc_free(%p)\n", (void *) s); +#endif + + /* clear buffers for SDEs */ + if (s->sde) { + for (stripe = 0; stripe < s->stripes; stripe++) { + for (layer = 0; layer < s->d + 1; layer++) { + for (plane = 0; plane < s->planes; plane++) + if (s->sde[stripe][layer][plane] != SDE_DONE && + s->sde[stripe][layer][plane] != SDE_TODO) + jbg_buf_free(&s->sde[stripe][layer][plane]); + checked_free(s->sde[stripe][layer]); + } + checked_free(s->sde[stripe]); + } + checked_free(s->sde); + } + + /* clear free_list */ + jbg_buf_free(&s->free_list); + + /* clear memory for arithmetic encoder states */ + checked_free(s->s); + + /* clear memory for differential-layer typical prediction buffer */ + checked_free(s->tp); + + /* clear memory for adaptive template pixel offsets */ + checked_free(s->tx); + + /* clear lowres image buffers */ + if (s->lhp[1]) { + for (plane = 0; plane < s->planes; plane++) + checked_free(s->lhp[1][plane]); + checked_free(s->lhp[1]); + } + + /* clear buffer for index of highres image in lhp */ + checked_free(s->highres); + + return; +} + + +/* + * Convert the error codes used by jbg_dec_in() into an English ASCII string + */ +const char *jbg_strerror(int errnum) +{ + errnum >>= 4; + if (errnum < 0 || (unsigned) errnum >= sizeof(errmsg)/sizeof(errmsg[0])) + return "Unknown error code passed to jbg_strerror()"; + + return errmsg[errnum]; +} + + +/* + * The constructor for a decoder + */ +void jbg_dec_init(struct jbg_dec_state *s) +{ + s->order = 0; + s->d = -1; + s->bie_len = 0; + s->buf_len = 0; + s->dppriv = NULL; + s->xmax = 4294967295UL; + s->ymax = 4294967295UL; + s->dmax = 256; + s->s = NULL; + + return; +} + + +/* + * Specify a maximum image size for the decoder. If the JBIG file has + * the order bit ILEAVE, but not the bit SEQ set, then the decoder + * will abort to decode after the image has reached the maximal + * resolution layer which is still not wider than xmax or higher than + * ymax. + */ +void jbg_dec_maxsize(struct jbg_dec_state *s, unsigned long xmax, + unsigned long ymax) +{ + if (xmax > 0) s->xmax = xmax; + if (ymax > 0) s->ymax = ymax; + + return; +} + + +/* + * Decode the new len PSDC bytes to which data points and add them to + * the current stripe. Return the number of bytes which have actually + * been read (this will be less than len if a marker segment was + * part of the data or if the final byte was 0xff, in which case + * this code cannot determine whether we have a marker segment). + */ +static size_t decode_pscd(struct jbg_dec_state *s, unsigned char *data, + size_t len) +{ + unsigned long stripe; + unsigned int layer, plane; + unsigned long hl, ll, y, hx, hy, lx, ly, hbpl, lbpl; + unsigned char *hp, *lp1, *lp2, *p1, *q1; + register unsigned long line_h1, line_h2, line_h3; + register unsigned long line_l1, line_l2, line_l3; + struct jbg_ardec_state *se; + unsigned long x; + long o; + unsigned a; + int n; + int pix, cx = 0, slntp, tx; + + /* SDE loop variables */ + stripe = s->ii[iindex[s->order & 7][STRIPE]]; + layer = s->ii[iindex[s->order & 7][LAYER]]; + plane = s->ii[iindex[s->order & 7][PLANE]]; + + /* forward data to arithmetic decoder */ + se = s->s[plane] + layer - s->dl; + se->pscd_ptr = data; + se->pscd_end = data + len; + + /* number of lines per stripe in highres image */ + hl = s->l0 << layer; + /* number of lines per stripe in lowres image */ + ll = hl >> 1; + /* current line number in highres image */ + y = stripe * hl + s->i; + /* number of pixels in highres image */ + hx = jbg_ceil_half(s->xd, s->d - layer); + hy = jbg_ceil_half(s->yd, s->d - layer); + /* number of pixels in lowres image */ + lx = jbg_ceil_half(hx, 1); + ly = jbg_ceil_half(hy, 1); + /* bytes per line in highres and lowres image */ + hbpl = jbg_ceil_half(hx, 3); + lbpl = jbg_ceil_half(lx, 3); + /* pointer to highres and lowres image bytes */ + hp = s->lhp[ layer & 1][plane] + (stripe * hl + s->i) * hbpl + + (s->x >> 3); + lp2 = s->lhp[(layer-1) & 1][plane] + (stripe * ll + (s->i >> 1)) * lbpl + + (s->x >> 4); + lp1 = lp2 + lbpl; + + /* restore a few local variables */ + line_h1 = s->line_h1; + line_h2 = s->line_h2; + line_h3 = s->line_h3; + line_l1 = s->line_l1; + line_l2 = s->line_l2; + line_l3 = s->line_l3; + x = s->x; + +#ifdef DEBUG + if (s->x == 0 && s->i == 0 && s->pseudo) + fprintf(stderr, "decode_pscd(%p, %p, %ld): s/d/p = %2lu/%2u/%2u\n", + (void *) s, (void *) data, (long) len, stripe, layer, plane); +#endif + + if (s->x == 0 && s->i == 0 && + (stripe == 0 || s->reset[plane][layer - s->dl]) && s->pseudo) { + s->tx[plane][layer - s->dl] = s->ty[plane][layer - s->dl] = 0; + s->lntp[plane][layer - s->dl] = 1; + } + + if (layer == 0) { + + /* + * Decode lowest resolution layer + */ + + for (; s->i < hl && y < hy; s->i++, y++) { + + /* adaptive template changes */ + if (x == 0 && s->pseudo) + for (n = 0; n < s->at_moves; n++) + if (s->at_line[n] == s->i) { + s->tx[plane][layer - s->dl] = s->at_tx[n]; + s->ty[plane][layer - s->dl] = s->at_ty[n]; +#ifdef DEBUG + fprintf(stderr, "ATMOVE: line=%lu, tx=%d, ty=%d.\n", s->i, + s->tx[plane][layer - s->dl], s->ty[plane][layer - s->dl]); +#endif + } + tx = s->tx[plane][layer - s->dl]; + assert(tx >= 0); /* i.e., tx can safely be cast to unsigned */ + + /* typical prediction */ + if (s->options & JBG_TPBON && s->pseudo) { + slntp = arith_decode(se, (s->options & JBG_LRLTWO) ? TPB2CX : TPB3CX); + if (slntp < 0) + goto leave; + s->lntp[plane][layer - s->dl] = + !(slntp ^ s->lntp[plane][layer - s->dl]); + if (!s->lntp[plane][layer - s->dl]) { + /* this line is 'typical' (i.e. identical to the previous one) */ + p1 = hp; + if (s->i == 0 && (stripe == 0 || s->reset[plane][layer - s->dl])) + while (p1 < hp + hbpl) *p1++ = 0; + else { + q1 = hp - hbpl; + while (q1 < hp) *p1++ = *q1++; + } + hp += hbpl; + continue; + } + /* this line is 'not typical' and has to be coded completely */ + } + s->pseudo = 0; + + /* + * Layout of the variables line_h1, line_h2, line_h3, which contain + * as bits the neighbour pixels of the currently decoded pixel X: + * + * 76543210 76543210 76543210 76543210 line_h3 + * 76543210 76543210 76543210 76543210 line_h2 + * 76543210 76543210 76543210 76543210 X line_h1 + */ + + if (x == 0) { + line_h1 = line_h2 = line_h3 = 0; + if (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl])) + line_h2 = (long)*(hp - hbpl) << 8; + if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl])) + line_h3 = (long)*(hp - hbpl - hbpl) << 8; + } + + /* + * Another tiny JBIG standard bug: + * + * While implementing the line_h3 handling here, I discovered + * another problem with the ITU-T T.82(1993 E) specification. + * This might be a somewhat pathological case, however. The + * standard is unclear about how a decoder should behave in the + * following situation: + * + * Assume we are in layer 0 and all stripes are single lines + * (L0=1 allowed by table 9). We are now decoding the first (and + * only) line of the third stripe. Assume, the first stripe was + * terminated by SDRST and the second stripe was terminated by + * SDNORM. While decoding the only line of the third stripe with + * the three-line template, we need access to pixels from the + * previous two stripes. We know that the previous stripe + * terminated with SDNROM, so we access the pixel from the + * second stripe. But do we have to replace the pixels from the + * first stripe by background pixels, because this stripe ended + * with SDRST? The standard, especially clause 6.2.5 does never + * mention this case, so the behaviour is undefined here. My + * current implementation remembers only the marker used to + * terminate the previous stripe. In the above example, the + * pixels of the first stripe are accessed despite the fact that + * this stripe ended with SDRST. An alternative (only slightly + * more complicated) implementation would be to remember the end + * marker (SDNORM or SDRST) of the previous two stripes in a + * plane/layer and to act accordingly when accessing the two + * previous lines. What am I supposed to do here? + * + * As the standard is unclear about the correct behaviour in the + * situation of the above example, I strongly suggest to avoid + * the following situation while encoding data with JBIG: + * + * LRLTWO = 0, L0=1 and both SDNORM and SDRST appear in layer 0. + * + * I guess that only a very few if any encoders will switch + * between SDNORM and SDRST, so let us hope that this ambiguity + * in the standard will never cause any interoperability + * problems. + * + * Markus Kuhn -- 1995-04-30 + */ + + /* decode line */ + while (x < hx) { + if ((x & 7) == 0) { + if (x < hbpl * 8 - 8 && + (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl]))) { + line_h2 |= *(hp - hbpl + 1); + if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl])) + line_h3 |= *(hp - hbpl - hbpl + 1); + } + } + if (s->options & JBG_LRLTWO) { + /* two line template */ + do { + if (tx) { + if ((unsigned) tx > x) + a = 0; + else if (tx < 8) + a = ((line_h1 >> (tx - 5)) & 0x010); + else { + o = (x - tx) - (x & ~7L); + a = (hp[o >> 3] >> (7 - (o & 7))) & 1; + a <<= 4; + } + assert(tx > 31 || + a == ((line_h1 >> (tx - 5)) & 0x010)); + pix = arith_decode(se, (((line_h2 >> 9) & 0x3e0) | a | + (line_h1 & 0x00f))); + } else + pix = arith_decode(se, (((line_h2 >> 9) & 0x3f0) | + (line_h1 & 0x00f))); + if (pix < 0) + goto leave; + line_h1 = (line_h1 << 1) | pix; + line_h2 <<= 1; + } while ((++x & 7) && x < hx); + } else { + /* three line template */ + do { + if (tx) { + if ((unsigned) tx > x) + a = 0; + else if (tx < 8) + a = ((line_h1 >> (tx - 3)) & 0x004); + else { + o = (x - tx) - (x & ~7L); + a = (hp[o >> 3] >> (7 - (o & 7))) & 1; + a <<= 2; + } + assert(tx > 31 || + a == ((line_h1 >> (tx - 3)) & 0x004)); + pix = arith_decode(se, (((line_h3 >> 7) & 0x380) | + ((line_h2 >> 11) & 0x078) | a | + (line_h1 & 0x003))); + } else + pix = arith_decode(se, (((line_h3 >> 7) & 0x380) | + ((line_h2 >> 11) & 0x07c) | + (line_h1 & 0x003))); + if (pix < 0) + goto leave; + + line_h1 = (line_h1 << 1) | pix; + line_h2 <<= 1; + line_h3 <<= 1; + } while ((++x & 7) && x < hx); + } /* if (s->options & JBG_LRLTWO) */ + *hp++ = line_h1; + } /* while */ + *(hp - 1) <<= hbpl * 8 - hx; + x = 0; + s->pseudo = 1; + } /* for (i = ...) */ + + } else { + + /* + * Decode differential layer + */ + + for (; s->i < hl && y < hy; s->i++, y++) { + + /* adaptive template changes */ + if (x == 0) + for (n = 0; n < s->at_moves; n++) + if (s->at_line[n] == s->i) { + s->tx[plane][layer - s->dl] = s->at_tx[n]; + s->ty[plane][layer - s->dl] = s->at_ty[n]; +#ifdef DEBUG + fprintf(stderr, "ATMOVE: line=%lu, tx=%d, ty=%d.\n", s->i, + s->tx[plane][layer - s->dl], s->ty[plane][layer - s->dl]); +#endif + } + tx = s->tx[plane][layer - s->dl]; + + /* handle lower border of low-resolution image */ + if ((s->i >> 1) >= ll - 1 || (y >> 1) >= ly - 1) + lp1 = lp2; + + /* typical prediction */ + if ((s->options & JBG_TPDON) && s->pseudo) { + if ((s->lntp[plane][layer - s->dl] = arith_decode(se, TPDCX)) < 0) + goto leave; + } + s->pseudo = 0; + + /* + * Layout of the variables line_h1, line_h2, line_h3, which contain + * as bits the high resolution neighbour pixels of the currently + * decoded highres pixel X: + * + * 76543210 76543210 76543210 76543210 line_h3 + * 76543210 76543210 76543210 76543210 line_h2 + * 76543210 76543210 76543210 76543210 X line_h1 + * + * Layout of the variables line_l1, line_l2, line_l3, which contain + * the low resolution pixels near the currently decoded pixel as bits. + * The lowres pixel in which the currently coded highres pixel is + * located is marked as Y: + * + * 76543210 76543210 76543210 76543210 line_l3 + * 76543210 76543210 Y6543210 76543210 line_l2 + * 76543210 76543210 76543210 76543210 line_l1 + */ + + + if (x == 0) { + line_h1 = line_h2 = line_h3 = line_l1 = line_l2 = line_l3 = 0; + if (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl])) { + line_h2 = (long)*(hp - hbpl) << 8; + if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl])) + line_h3 = (long)*(hp - hbpl - hbpl) << 8; + } + if (s->i > 1 || (y > 1 && !s->reset[plane][layer-s->dl])) + line_l3 = (long)*(lp2 - lbpl) << 8; + line_l2 = (long)*lp2 << 8; + line_l1 = (long)*lp1 << 8; + } + + /* decode line */ + while (x < hx) { + if ((x & 15) == 0) + if ((x >> 1) < lbpl * 8 - 8) { + line_l1 |= *(lp1 + 1); + line_l2 |= *(lp2 + 1); + if (s->i > 1 || + (y > 1 && !s->reset[plane][layer - s->dl])) + line_l3 |= *(lp2 - lbpl + 1); + } + do { + + assert(hp - (s->lhp[ layer &1][plane] + (stripe * hl + s->i) + * hbpl) == (ptrdiff_t) x >> 3); + assert(lp2 - (s->lhp[(layer-1) &1][plane] + (stripe * ll + (s->i>>1)) + * lbpl) == (ptrdiff_t) x >> 4); + + if ((x & 7) == 0) + if (x < hbpl * 8 - 8) { + if (s->i > 0 || (y > 0 && !s->reset[plane][layer - s->dl])) { + line_h2 |= *(hp + 1 - hbpl); + if (s->i > 1 || (y > 1 && !s->reset[plane][layer - s->dl])) + line_h3 |= *(hp + 1 - hbpl - hbpl); + } + } + do { + if (!s->lntp[plane][layer - s->dl]) + cx = (((line_l3 >> 14) & 0x007) | + ((line_l2 >> 11) & 0x038) | + ((line_l1 >> 8) & 0x1c0)); + if (!s->lntp[plane][layer - s->dl] && + (cx == 0x000 || cx == 0x1ff)) { + /* pixels are typical and have not to be decoded */ + do { + line_h1 = (line_h1 << 1) | (cx & 1); + } while ((++x & 1) && x < hx); + line_h2 <<= 2; line_h3 <<= 2; + } else + do { + + /* deterministic prediction */ + if (s->options & JBG_DPON) + if ((y & 1) == 0) + if ((x & 1) == 0) + /* phase 0 */ + pix = s->dppriv[((line_l3 >> 15) & 0x003) | + ((line_l2 >> 13) & 0x00c) | + ((line_h1 << 4) & 0x010) | + ((line_h2 >> 9) & 0x0e0)]; + else + /* phase 1 */ + pix = s->dppriv[(((line_l3 >> 15) & 0x003) | + ((line_l2 >> 13) & 0x00c) | + ((line_h1 << 4) & 0x030) | + ((line_h2 >> 9) & 0x1c0)) + 256]; + else + if ((x & 1) == 0) + /* phase 2 */ + pix = s->dppriv[(((line_l3 >> 15) & 0x003) | + ((line_l2 >> 13) & 0x00c) | + ((line_h1 << 4) & 0x010) | + ((line_h2 >> 9) & 0x0e0) | + ((line_h3 >> 6) & 0x700)) + 768]; + else + /* phase 3 */ + pix = s->dppriv[(((line_l3 >> 15) & 0x003) | + ((line_l2 >> 13) & 0x00c) | + ((line_h1 << 4) & 0x030) | + ((line_h2 >> 9) & 0x1c0) | + ((line_h3 >> 6) & 0xe00)) + 2816]; + else + pix = 2; + + if (pix & 2) { + if (tx) + cx = ((line_h1 & 0x003) | + (((line_h1 << 2) >> (tx - 3)) & 0x010) | + ((line_h2 >> 12) & 0x00c) | + ((line_h3 >> 10) & 0x020)); + else + cx = ((line_h1 & 0x003) | + ((line_h2 >> 12) & 0x01c) | + ((line_h3 >> 10) & 0x020)); + if (x & 1) + cx |= (((line_l2 >> 8) & 0x0c0) | + ((line_l1 >> 6) & 0x300)) | (1UL << 10); + else + cx |= (((line_l2 >> 9) & 0x0c0) | + ((line_l1 >> 7) & 0x300)); + cx |= (y & 1) << 11; + + pix = arith_decode(se, cx); + if (pix < 0) + goto leave; + } + + line_h1 = (line_h1 << 1) | pix; + line_h2 <<= 1; + line_h3 <<= 1; + + } while ((++x & 1) && x < hx); + line_l1 <<= 1; line_l2 <<= 1; line_l3 <<= 1; + } while ((x & 7) && x < hx); + *hp++ = line_h1; + } while ((x & 15) && x < hx); + ++lp1; + ++lp2; + } /* while */ + x = 0; + + *(hp - 1) <<= hbpl * 8 - hx; + if ((s->i & 1) == 0) { + /* low resolution pixels are used twice */ + lp1 -= lbpl; + lp2 -= lbpl; + } else + s->pseudo = 1; + + } /* for (i = ...) */ + + } + + leave: + + /* save a few local variables */ + s->line_h1 = line_h1; + s->line_h2 = line_h2; + s->line_h3 = line_h3; + s->line_l1 = line_l1; + s->line_l2 = line_l2; + s->line_l3 = line_l3; + s->x = x; + + return se->pscd_ptr - data; +} + + +/* + * Provide to the decoder a new BIE fragment of len bytes starting at data. + * + * Unless cnt is NULL, *cnt will contain the number of actually read bytes + * on return. + * + * Normal return values: + * + * JBG_EAGAIN All data bytes provided so far have been processed + * (*cnt == len) but the end of the data stream has + * not yet been recognized. Call the function again + * with additional BIE bytes. + * JBG_EOK The function has reached the end of a and + * a full image has been decoded. The function can + * be called again with data from the next BIE, if + * there exists one, in order to get to a higher + * resolution layer. The remaining len - *cnt bytes + * of the previous data block will then have to passed + * to this function again if len > *cnt. + * JBG_EOK_INTR Parsing the BIE has been interrupted as had been + * requested by a jbg_dec_maxsize() specification. + * This function can be called again with the + * rest of the BIE to continue the decoding process. + * The remaining len - *cnt bytes of the previous + * data block will then have to be passed to this + * function again if len > *cnt. + * + * Any other return value indicates that the decoding process was + * aborted by a serious problem and the only function you can then + * still call is jbg_dec_free() in order to remove the mess, and + * jbg85_strerror() to find out what to tell the user. (Looking at the + * least significant bits of the return value will provide additional + * information by identifying which test exactly has failed.) + */ +int jbg_dec_in(struct jbg_dec_state *s, unsigned char *data, size_t len, + size_t *cnt) +{ + int i, j, required_length; + unsigned long x, y; + unsigned long is[3], ie[3]; + size_t dummy_cnt; + unsigned char *dppriv; + + if (!cnt) cnt = &dummy_cnt; + *cnt = 0; + if (len < 1) return JBG_EAGAIN; + + /* read in 20-byte BIH */ + if (s->bie_len < 20) { + while (s->bie_len < 20 && *cnt < len) + s->buffer[s->bie_len++] = data[(*cnt)++]; + if (s->bie_len < 20) + return JBG_EAGAIN; + /* test whether this looks like a valid JBIG header at all */ + if (s->buffer[1] < s->buffer[0]) + return JBG_EINVAL | 1; + if (s->buffer[3] != 0) return JBG_EINVAL | 2; /* padding != 0 */ + if ((s->buffer[18] & 0xf0) != 0) return JBG_EINVAL | 3; /* padding != 0 */ + if ((s->buffer[19] & 0x80) != 0) return JBG_EINVAL | 4; /* padding != 0 */ + if (s->buffer[0] != s->d + 1) + return JBG_ENOCONT | 1; + s->dl = s->buffer[0]; + s->d = s->buffer[1]; + if (s->dl == 0) + s->planes = s->buffer[2]; + else + if (s->planes != s->buffer[2]) + return JBG_ENOCONT | 2; + x = (((long) s->buffer[ 4] << 24) | ((long) s->buffer[ 5] << 16) | + ((long) s->buffer[ 6] << 8) | (long) s->buffer[ 7]); + y = (((long) s->buffer[ 8] << 24) | ((long) s->buffer[ 9] << 16) | + ((long) s->buffer[10] << 8) | (long) s->buffer[11]); + if (s->dl != 0 && ((s->xd << (s->d - s->dl + 1)) != x && + (s->yd << (s->d - s->dl + 1)) != y)) + return JBG_ENOCONT | 3; + s->xd = x; + s->yd = y; + s->l0 = (((long) s->buffer[12] << 24) | ((long) s->buffer[13] << 16) | + ((long) s->buffer[14] << 8) | (long) s->buffer[15]); + /* ITU-T T.85 trick not directly implemented by decoder; for full + * T.85 compatibility with respect to all NEWLEN marker scenarios, + * preprocess BIE with jbg_newlen() before passing it to the decoder, + * or consider using the decoder found in jbig85.c instead. */ + if (s->yd == 0xffffffff) + return JBG_EIMPL | 1; + if (!s->planes) return JBG_EINVAL | 5; + if (!s->xd) return JBG_EINVAL | 6; + if (!s->yd) return JBG_EINVAL | 7; + if (!s->l0) return JBG_EINVAL | 8; + /* prevent uint32 overflow: s->l0 * 2 ^ s->d < 2 ^ 32 */ + if (s->d > 31) + return JBG_EIMPL | 2; + if ((s->d != 0 && s->l0 >= (1UL << (32 - s->d)))) + return JBG_EIMPL | 3; + s->mx = s->buffer[16]; + if (s->mx > 127) + return JBG_EINVAL | 9; + s->my = s->buffer[17]; +#if 0 + if (s->my > 0) + return JBG_EIMPL | 4; +#endif + s->order = s->buffer[18]; + if (iindex[s->order & 7][0] < 0) + return JBG_EINVAL | 10; + /* HITOLO and SEQ currently not yet implemented */ + if (s->dl != s->d && (s->order & JBG_HITOLO || s->order & JBG_SEQ)) + return JBG_EIMPL | 5; + s->options = s->buffer[19]; + + /* calculate number of stripes that will be required */ + s->stripes = jbg_stripes(s->l0, s->yd, s->d); + + /* some initialization */ + s->ii[iindex[s->order & 7][STRIPE]] = 0; + s->ii[iindex[s->order & 7][LAYER]] = s->dl; + s->ii[iindex[s->order & 7][PLANE]] = 0; + if (s->dl == 0) { + s->s = (struct jbg_ardec_state **) + checked_malloc(s->planes, sizeof(struct jbg_ardec_state *)); + s->tx = (int **) checked_malloc(s->planes, sizeof(int *)); + s->ty = (int **) checked_malloc(s->planes, sizeof(int *)); + s->reset = (int **) checked_malloc(s->planes, sizeof(int *)); + s->lntp = (int **) checked_malloc(s->planes, sizeof(int *)); + s->lhp[0] = (unsigned char **) + checked_malloc(s->planes, sizeof(unsigned char *)); + s->lhp[1] = (unsigned char **) + checked_malloc(s->planes, sizeof(unsigned char *)); + for (i = 0; i < s->planes; i++) { + s->s[i] = (struct jbg_ardec_state *) + checked_malloc(s->d - s->dl + 1, sizeof(struct jbg_ardec_state)); + s->tx[i] = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int)); + s->ty[i] = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int)); + s->reset[i] = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int)); + s->lntp[i] = (int *) checked_malloc(s->d - s->dl + 1, sizeof(int)); + s->lhp[ s->d & 1][i] = (unsigned char *) + checked_malloc(s->yd, jbg_ceil_half(s->xd, 3)); + s->lhp[(s->d-1) & 1][i] = (unsigned char *) + checked_malloc(jbg_ceil_half(s->yd, 1), jbg_ceil_half(s->xd, 1+3)); + } + } else { + for (i = 0; i < s->planes; i++) { + s->s[i] = (struct jbg_ardec_state *) + checked_realloc(s->s[i], s->d - s->dl + 1, + sizeof(struct jbg_ardec_state)); + s->tx[i] = (int *) checked_realloc(s->tx[i], + s->d - s->dl + 1, sizeof(int)); + s->ty[i] = (int *) checked_realloc(s->ty[i], + s->d - s->dl + 1, sizeof(int)); + s->reset[i] = (int *) checked_realloc(s->reset[i], + s->d - s->dl + 1, sizeof(int)); + s->lntp[i] = (int *) checked_realloc(s->lntp[i], + s->d - s->dl + 1, sizeof(int)); + s->lhp[ s->d & 1][i] = (unsigned char *) + checked_realloc(s->lhp[ s->d & 1][i], + s->yd, jbg_ceil_half(s->xd, 3)); + s->lhp[(s->d-1) & 1][i] = (unsigned char *) + checked_realloc(s->lhp[(s->d-1) & 1][i], + jbg_ceil_half(s->yd, 1), jbg_ceil_half(s->xd, 1+3)); + } + } + for (i = 0; i < s->planes; i++) + for (j = 0; j <= s->d - s->dl; j++) + arith_decode_init(s->s[i] + j, 0); + if (s->dl == 0 || (s->options & JBG_DPON && !(s->options & JBG_DPPRIV))) + s->dppriv = jbg_dptable; + s->comment_skip = 0; + s->buf_len = 0; + s->x = 0; + s->i = 0; + s->pseudo = 1; + s->at_moves = 0; + } + + /* read in DPTABLE */ + if (s->bie_len < 20 + 1728 && + (s->options & (JBG_DPON | JBG_DPPRIV | JBG_DPLAST)) == + (JBG_DPON | JBG_DPPRIV)) { + assert(s->bie_len >= 20); + if (!s->dppriv || s->dppriv == jbg_dptable) + s->dppriv = (char *) checked_malloc(1728, sizeof(char)); + while (s->bie_len < 20 + 1728 && *cnt < len) + s->dppriv[s->bie_len++ - 20] = data[(*cnt)++]; + if (s->bie_len < 20 + 1728) + return JBG_EAGAIN; + dppriv = (unsigned char *) s->dppriv; + s->dppriv = (char *) checked_malloc(6912, sizeof(char)); + jbg_dppriv2int(s->dppriv, dppriv); + checked_free(dppriv); + } + + /* + * BID processing loop + */ + + while (*cnt < len) { + + /* process floating marker segments */ + + /* skip COMMENT contents */ + if (s->comment_skip) { + if (s->comment_skip <= len - *cnt) { + *cnt += s->comment_skip; + s->comment_skip = 0; + } else { + s->comment_skip -= len - *cnt; + *cnt = len; + } + continue; + } + + /* load complete marker segments into s->buffer for processing */ + if (s->buf_len > 0) { + assert(s->buffer[0] == MARKER_ESC); + while (s->buf_len < 2 && *cnt < len) + s->buffer[s->buf_len++] = data[(*cnt)++]; + if (s->buf_len < 2) continue; + switch (s->buffer[1]) { + case MARKER_COMMENT: required_length = 6; break; + case MARKER_ATMOVE: required_length = 8; break; + case MARKER_NEWLEN: required_length = 6; break; + case MARKER_ABORT: + case MARKER_SDNORM: + case MARKER_SDRST: required_length = 2; break; + case MARKER_STUFF: + /* forward stuffed 0xff to arithmetic decoder */ + s->buf_len = 0; + decode_pscd(s, s->buffer, 2); + continue; + default: + return JBG_EMARKER; + } + while (s->buf_len < required_length && *cnt < len) + s->buffer[s->buf_len++] = data[(*cnt)++]; + if (s->buf_len < required_length) continue; + /* now the buffer is filled with exactly one marker segment */ + switch (s->buffer[1]) { + case MARKER_COMMENT: + s->comment_skip = + (((long) s->buffer[2] << 24) | ((long) s->buffer[3] << 16) | + ((long) s->buffer[4] << 8) | (long) s->buffer[5]); + break; + case MARKER_ATMOVE: + if (s->at_moves < JBG_ATMOVES_MAX) { + s->at_line[s->at_moves] = + (((long) s->buffer[2] << 24) | ((long) s->buffer[3] << 16) | + ((long) s->buffer[4] << 8) | (long) s->buffer[5]); + s->at_tx[s->at_moves] = (signed char) s->buffer[6]; + s->at_ty[s->at_moves] = s->buffer[7]; + if (s->at_tx[s->at_moves] < - (int) s->mx || + s->at_tx[s->at_moves] > (int) s->mx || + s->at_ty[s->at_moves] > (int) s->my || + (s->at_ty[s->at_moves] == 0 && s->at_tx[s->at_moves] < 0)) + return JBG_EINVAL | 11; + if (s->at_ty[s->at_moves] != 0) + return JBG_EIMPL | 6; + s->at_moves++; + } else + return JBG_EIMPL | 7; /* more than JBG_ATMOVES_MAX ATMOVES */ + break; + case MARKER_NEWLEN: + y = (((long) s->buffer[2] << 24) | ((long) s->buffer[3] << 16) | + ((long) s->buffer[4] << 8) | (long) s->buffer[5]); + if (y > s->yd) return JBG_EINVAL | 12; + if (!(s->options & JBG_VLENGTH)) return JBG_EINVAL | 13; + s->yd = y; + /* calculate again number of stripes that will be required */ + s->stripes = jbg_stripes(s->l0, s->yd, s->d); + break; + case MARKER_ABORT: + return JBG_EABORT; + + case MARKER_SDNORM: + case MARKER_SDRST: + /* decode final pixels based on trailing zero bytes */ + decode_pscd(s, s->buffer, 2); + + arith_decode_init(s->s[s->ii[iindex[s->order & 7][PLANE]]] + + s->ii[iindex[s->order & 7][LAYER]] - s->dl, + s->ii[iindex[s->order & 7][STRIPE]] != s->stripes - 1 + && s->buffer[1] != MARKER_SDRST); + + s->reset[s->ii[iindex[s->order & 7][PLANE]]] + [s->ii[iindex[s->order & 7][LAYER]] - s->dl] = + (s->buffer[1] == MARKER_SDRST); + + /* prepare for next SDE */ + s->x = 0; + s->i = 0; + s->pseudo = 1; + s->at_moves = 0; + + /* increment layer/stripe/plane loop variables */ + /* start and end value for each loop: */ + is[iindex[s->order & 7][STRIPE]] = 0; + ie[iindex[s->order & 7][STRIPE]] = s->stripes - 1; + is[iindex[s->order & 7][LAYER]] = s->dl; + ie[iindex[s->order & 7][LAYER]] = s->d; + is[iindex[s->order & 7][PLANE]] = 0; + ie[iindex[s->order & 7][PLANE]] = s->planes - 1; + i = 2; /* index to innermost loop */ + do { + j = 0; /* carry flag */ + if (++s->ii[i] > ie[i]) { + /* handling overflow of loop variable */ + j = 1; + if (i > 0) + s->ii[i] = is[i]; + } + } while (--i >= 0 && j); + + s->buf_len = 0; + + /* check whether this have been all SDEs */ + if (j) { +#ifdef DEBUG + fprintf(stderr, "This was the final SDE in this BIE, " + "%ld bytes left.\n", (long) (len - *cnt)); +#endif + s->bie_len = 0; + return JBG_EOK; + } + + /* check whether we have to abort because of xmax/ymax */ + if (iindex[s->order & 7][LAYER] == 0 && i < 0) { + /* LAYER is the outermost loop and we have just gone to next layer */ + if (jbg_ceil_half(s->xd, s->d - s->ii[0]) > s->xmax || + jbg_ceil_half(s->yd, s->d - s->ii[0]) > s->ymax) { + s->xmax = 4294967295UL; + s->ymax = 4294967295UL; + return JBG_EOK_INTR; + } + if (s->ii[0] > (unsigned long) s->dmax) { + s->dmax = 256; + return JBG_EOK_INTR; + } + } + + break; + } + s->buf_len = 0; + + } else if (data[*cnt] == MARKER_ESC) + s->buffer[s->buf_len++] = data[(*cnt)++]; + + else { + + /* we have found PSCD bytes */ + *cnt += decode_pscd(s, data + *cnt, len - *cnt); + if (*cnt < len && data[*cnt] != 0xff) { +#ifdef DEBUG + fprintf(stderr, "PSCD was longer than expected, unread bytes " + "%02x %02x %02x %02x ...\n", data[*cnt], data[*cnt+1], + data[*cnt+2], data[*cnt+3]); +#endif + return JBG_EINVAL | 14; + } + + } + } /* of BID processing loop 'while (*cnt < len) ...' */ + + return JBG_EAGAIN; +} + + +/* + * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call this + * function in order to find out the width of the image. Returns 0 if + * there is no image available yet. + */ +unsigned long jbg_dec_getwidth(const struct jbg_dec_state *s) +{ + if (s->d < 0) + return 0; + if (iindex[s->order & 7][LAYER] == 0) { + if (s->ii[0] < 1) + return 0; + else + return jbg_ceil_half(s->xd, s->d - (s->ii[0] - 1)); + } + + return s->xd; +} + + +/* + * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call this + * function in order to find out the height of the image. Returns 0 if + * there is no image available yet. + */ +unsigned long jbg_dec_getheight(const struct jbg_dec_state *s) +{ + if (s->d < 0) + return 0; + if (iindex[s->order & 7][LAYER] == 0) { + if (s->ii[0] < 1) + return 0; + else + return jbg_ceil_half(s->yd, s->d - (s->ii[0] - 1)); + } + + return s->yd; +} + + +/* + * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call this + * function in order to get a pointer to the image. Returns NULL if + * there is no image available yet. + */ +unsigned char *jbg_dec_getimage(const struct jbg_dec_state *s, int plane) +{ + if (s->d < 0) + return NULL; + if (iindex[s->order & 7][LAYER] == 0) { + if (s->ii[0] < 1) + return NULL; + else + return s->lhp[(s->ii[0] - 1) & 1][plane]; + } + + return s->lhp[s->d & 1][plane]; +} + + +/* + * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call + * this function in order to find out the size in bytes of one + * bitplane of the image. + */ +unsigned long jbg_dec_getsize(const struct jbg_dec_state *s) +{ + if (s->d < 0) + return 0; + if (iindex[s->order & 7][LAYER] == 0) { + if (s->ii[0] < 1) + return 0; + else + return + jbg_ceil_half(s->xd, s->d - (s->ii[0] - 1) + 3) * /* overflow risk? */ + jbg_ceil_half(s->yd, s->d - (s->ii[0] - 1)); + } + + return jbg_ceil_half(s->xd, 3) * s->yd; +} + + +/* + * After jbg_dec_in() returned JBG_EOK or JBG_EOK_INTR, you can call + * this function in order to find out the size of the image that you + * can retrieve with jbg_merge_planes(). + */ +unsigned long jbg_dec_getsize_merged(const struct jbg_dec_state *s) +{ + if (s->d < 0) + return 0; + if (iindex[s->order & 7][LAYER] == 0) { + if (s->ii[0] < 1) + return 0; + else + return + jbg_ceil_half(s->xd, s->d - (s->ii[0] - 1)) * /* overflow risk? */ + jbg_ceil_half(s->yd, s->d - (s->ii[0] - 1)) * + ((s->planes + 7) / 8); + } + + return s->xd * s->yd * ((s->planes + 7) / 8); +} + + +/* + * The destructor function which releases any resources obtained by the + * other decoder functions. + */ +void jbg_dec_free(struct jbg_dec_state *s) +{ + int i; + + if (s->d < 0 || s->s == NULL) + return; + s->d = -2; + + for (i = 0; i < s->planes; i++) { + checked_free(s->s[i]); + checked_free(s->tx[i]); + checked_free(s->ty[i]); + checked_free(s->reset[i]); + checked_free(s->lntp[i]); + checked_free(s->lhp[0][i]); + checked_free(s->lhp[1][i]); + } + + checked_free(s->s); + checked_free(s->tx); + checked_free(s->ty); + checked_free(s->reset); + checked_free(s->lntp); + checked_free(s->lhp[0]); + checked_free(s->lhp[1]); + if (s->dppriv && s->dppriv != jbg_dptable) + checked_free(s->dppriv); + + s->s = NULL; + + return; +} + + +/* + * Split bigendian integer pixel field into separate bit planes. In the + * src array, every pixel is represented by a ((has_planes + 7) / 8) byte + * long word, most significant byte first. While has_planes describes + * the number of used bits per pixel in the source image, encode_plane + * is the number of most significant bits among those that we + * actually transfer to dest. + */ +void jbg_split_planes(unsigned long x, unsigned long y, int has_planes, + int encode_planes, + const unsigned char *src, unsigned char **dest, + int use_graycode) +{ + unsigned long bpl = jbg_ceil_half(x, 3); /* bytes per line in dest plane */ + unsigned long line, i; + unsigned k = 8; + int p; + unsigned prev; /* previous *src byte shifted by 8 bit to the left */ + register int bits, msb = has_planes - 1; + int bitno; + + /* sanity checks */ + if (encode_planes > has_planes) + encode_planes = has_planes; + use_graycode = use_graycode != 0 && encode_planes > 1; + + for (p = 0; p < encode_planes; p++) + memset(dest[p], 0, bpl * y); + + for (line = 0; line < y; line++) { /* lines loop */ + for (i = 0; i * 8 < x; i++) { /* dest bytes loop */ + for (k = 0; k < 8 && i * 8 + k < x; k++) { /* pixel loop */ + prev = 0; + for (p = 0; p < encode_planes; p++) { /* bit planes loop */ + /* calculate which bit in *src do we want */ + bitno = (msb - p) & 7; + /* put this bit with its left neighbor right adjusted into bits */ + bits = (prev | *src) >> bitno; + /* go to next *src byte, but keep old */ + if (bitno == 0) + prev = *src++ << 8; + /* make space for inserting new bit */ + dest[p][bpl * line + i] <<= 1; + /* insert bit, if requested apply Gray encoding */ + dest[p][bpl * line + i] |= (bits ^ (use_graycode & (bits>>1))) & 1; + /* + * Theorem: Let b(n),...,b(1),b(0) be the digits of a + * binary word and let g(n),...,g(1),g(0) be the digits of the + * corresponding Gray code word, then g(i) = b(i) xor b(i+1). + */ + } + /* skip unused *src bytes */ + for (;p < has_planes; p++) + if (((msb - p) & 7) == 0) + src++; + } + } + for (p = 0; p < encode_planes; p++) /* right padding loop */ + dest[p][bpl * (line + 1) - 1] <<= 8 - k; + } + + return; +} + +/* + * Merge the separate bit planes decoded by the JBIG decoder into an + * integer pixel field. This is essentially the counterpart to + * jbg_split_planes(). + */ +void jbg_dec_merge_planes(const struct jbg_dec_state *s, int use_graycode, + void (*data_out)(unsigned char *start, size_t len, + void *file), void *file) +{ +#define BUFLEN 4096 + unsigned long bpl, line, i; + unsigned k = 8; + int p; + unsigned char buf[BUFLEN]; + unsigned char *bp = buf; + unsigned char **src; + unsigned long x, y; + unsigned v; + + /* sanity check */ + use_graycode = use_graycode != 0; + + x = jbg_dec_getwidth(s); + y = jbg_dec_getheight(s); + if (x == 0 || y == 0) + return; + bpl = jbg_ceil_half(x, 3); /* bytes per line in src plane */ + + if (iindex[s->order & 7][LAYER] == 0) + if (s->ii[0] < 1) + return; + else + src = s->lhp[(s->ii[0] - 1) & 1]; + else + src = s->lhp[s->d & 1]; + + for (line = 0; line < y; line++) { /* lines loop */ + for (i = 0; i * 8 < x; i++) { /* src bytes loop */ + for (k = 0; k < 8 && i * 8 + k < x; k++) { /* pixel loop */ + v = 0; + for (p = 0; p < s->planes;) { /* dest bytes loop */ + do { + v = (v << 1) | + (((src[p][bpl * line + i] >> (7 - k)) & 1) ^ + (use_graycode & v)); + } while ((s->planes - ++p) & 7); + *bp++ = v; + if (bp - buf == BUFLEN) { + data_out(buf, BUFLEN, file); + bp = buf; + } + } + } + } + } + + if (bp - buf > 0) + data_out(buf, bp - buf, file); + + return; +} + + +/* + * Given a pointer p to the first byte of either a marker segment or a + * PSCD, as well as the length len of the remaining data, return + * either the pointer to the first byte of the next marker segment or + * PSCD, or p+len if this was the last one, or NULL if some error was + * encountered. Possible errors are: + * + * - not enough bytes left for complete marker segment + * - no marker segment terminates the PSCD + * - unknown marker code encountered + * + */ +static unsigned char *jbg_next_pscdms(unsigned char *p, size_t len) +{ + unsigned char *pp; + unsigned long l; + + if (len < 2) + return NULL; /* not enough bytes left for complete marker segment */ + + if (p[0] != MARKER_ESC || p[1] == MARKER_STUFF) { + do { + while (p[0] == MARKER_ESC && p[1] == MARKER_STUFF) { + p += 2; + len -= 2; + if (len < 2) + return NULL; /* not enough bytes left for complete marker segment */ + } + assert(len >= 2); + pp = (unsigned char *) memchr(p, MARKER_ESC, len - 1); + if (!pp) + return NULL; /* no marker segment terminates the PSCD */ + l = pp - p; + assert(l < len); + p += l; + len -= l; + } while (p[1] == MARKER_STUFF); + } else { + switch (p[1]) { + case MARKER_SDNORM: + case MARKER_SDRST: + case MARKER_ABORT: + return p + 2; + case MARKER_NEWLEN: + if (len < 6) + return NULL; /* not enough bytes left for complete marker segment */ + return p + 6; + case MARKER_ATMOVE: + if (len < 8) + return NULL; /* not enough bytes left for complete marker segment */ + return p + 8; + case MARKER_COMMENT: + if (len < 6) + return NULL; /* not enough bytes left for complete marker segment */ + l = (((long) p[2] << 24) | ((long) p[3] << 16) | + ((long) p[4] << 8) | (long) p[5]); + if (len - 6 < l) + return NULL; /* not enough bytes left for complete marker segment */ + return p + 6 + l; + default: + /* unknown marker sequence encountered */ + return NULL; + } + } + + return p; +} + + +/* + * Scan a complete BIE for a NEWLEN marker segment, then read the new + * YD value found in it and use it to overwrite the one in the BIE + * header. Use this procedure if a BIE initially declares an + * unreasonably high provisional YD value (e.g., 0xffffffff) or + * depends on the fact that section 6.2.6.2 of ITU-T T.82 says that a + * NEWLEN marker segment "could refer to a line in the immediately + * preceding stripe due to an unexpected termination of the image or + * the use of only such stripe". ITU-T.85 explicitely suggests the + * use of this for fax machines that start transmission before having + * encountered the end of the page. None of this is necessary for + * BIEs produced by JBIG-KIT, which normally does not use NEWLEN. + */ +int jbg_newlen(unsigned char *bie, size_t len) +{ + unsigned char *p = bie + 20; + int i; + unsigned long y, yn; + + if (len < 20) + return JBG_EAGAIN; + if ((bie[19] & (JBG_DPON | JBG_DPPRIV | JBG_DPLAST)) + == (JBG_DPON | JBG_DPPRIV)) + p += 1728; /* skip DPTABLE */ + if (p >= bie + len) + return JBG_EAGAIN; + + while ((p = jbg_next_pscdms(p, len - (p - bie)))) { + if (p == bie + len) + return JBG_EOK; + else if (p[0] == MARKER_ESC) + switch (p[1]) { + case MARKER_NEWLEN: + y = (((long) bie[ 8] << 24) | ((long) bie[ 9] << 16) | + ((long) bie[10] << 8) | (long) bie[11]); + yn = (((long) p[2] << 24) | ((long) p[3] << 16) | + ((long) p[4] << 8) | (long) p[5]); + if (yn > y) return JBG_EINVAL | 12; + /* overwrite YD in BIH with YD from NEWLEN */ + for (i = 0; i < 4; i++) { + bie[8+i] = p[2+i]; + } + return JBG_EOK; + case MARKER_ABORT: + return JBG_EABORT; + } + } + return JBG_EINVAL | 0; +} diff --git a/converter/other/jbig/libjbig/jbig.txt b/converter/other/jbig/libjbig/jbig.txt new file mode 100644 index 00000000..bdc14b17 --- /dev/null +++ b/converter/other/jbig/libjbig/jbig.txt @@ -0,0 +1,810 @@ + +Using the JBIG-KIT library +-------------------------- + +Markus Kuhn -- 2013-09-10 + + +This text explains how to use the functions provided by the JBIG-KIT +portable image compression library jbig.c in your application +software. The jbig.c library is a full-featured implementation of the +JBIG1 standard aimed at applications that can hold the entire +uncompressed and compressed image in RAM. + +[For applications that require only the single-bit-per-pixel "fax +subset" of the JBIG1 standard defined in ITU-T Recommendation T.85 +<http://www.itu.int/rec/T-REC-T.85/en>, the alternative implementation +found in jbig85.c may be preferable. It keeps not more than three +lines of the uncompressed image in RAM, which makes it particularly +suitable for embedded applications. For information on how to use +jbig85.c, please refer to the separate documentation file jbig85.txt.] + + +1 Introduction to JBIG + +We start with a short introduction to JBIG1. More detailed information +is provided in the "Introduction and overview" section of the JBIG1 +standard. Information on how to obtain a copy of the standard is +available from <http://www.itu.int/rec/T-REC-T.82/en> or +<http://www.iso.ch/>. + +Image data encoded with the JBIG algorithm is separated into planes, +layers, and stripes. Each plane contains one bit per pixel. The number +of planes stored in a JBIG data stream is the number of bits per +pixel. Resolution layers are numbered from 0 to D with 0 being the +layer with the lowest resolution and D the one with the highest. Each +next higher resolution layer has twice the number of rows and columns. +Layer 0 is encoded independently of any other data, all other +resolution layers are encoded as only the difference between the next +lower and the current layer. For applications that require very quick +access to parts of an image, it is possible to divide an image into +several horizontal stripes. All stripes of one resolution layer have +equal size, except perhaps the final one. The number of stripes of an +image is equal in all resolution layers and in all bit planes. + +The compressed data stream specified by the JBIG standard is called a +bi-level image entity (BIE). A BIE consists of a 20-byte header, +followed by an optional 1728-byte table (usually not present, except +in special applications) followed by a sequence of stripe data +entities (SDE). Each SDE encodes the content of one single stripe in +one plane of one resolution layer. Between the SDEs, other information +blocks (called floating marker segments) can also be present. They are +used to change certain parameters of the algorithm in the middle of an +image or contain additional application specific information. A BIE +looks like this: + + + +------------------------------------------------+ + | | + | 20-byte header (with image size, #planes, | + | #layers, stripe size, first layer, options, | + | SDE ordering, ...) | + | | + +------------------------------------------------+ + | | + | optional 1728-byte table | + | | + +------------------------------------------------+ + | | + | optional floating marker segments | + | | + +------------------------------------------------+ + | | + | stripe data entity | + | | + +------------------------------------------------+ + | | + | optional floating marker segments | + | | + +------------------------------------------------+ + | | + | stripe data entity | + | | + +------------------------------------------------+ + ... + +------------------------------------------------+ + | | + | stripe data entity | + | | + +------------------------------------------------+ + + +One BIE can contain all resolution layers of an image, but it is also +possible to store various resolution layers in several BIEs. The BIE +header contains the number of the first and the last resolution layer +stored in this BIE, as well as the size of the highest resolution +layer stored in this BIE. Progressive coding is deactivated by simply +storing the image in one single resolution layer. + +Different applications might have different requirements for the order +in which the SDEs for stripes of various planes and layers are stored +in the BIE, so all possible sensible orderings are allowed by the +standard and indicated by four bits in the header. + +It is possible to use the raw BIE data stream as specified by the JBIG +standard directly as the format of a file used for storing images. +This is what the pbmtojbg, jbgtopbm, pbmtojbg85, and jbgtopbm85 +conversion tools do that are provided in this package as demonstration +applications. However, as the BIE format has been designed for a large +number of very different applications, and to allow efficient direct +processing by special JBIG hardware chip implementations, the BIE +header contains only the minimum amount of information absolutely +required by the decompression algorithm. Many features expected from a +good file format are missing in the BIE data stream: + + - no "magic code" in the first few bytes to allow identification + of the file format on a typeless file system and to allow + automatic distinction from other compression algorithms + + - no standardized way to encode additional information such as a + textual description, information about the meaning of various bit + planes, the physical size and resolution of the document, etc. + + - a checksum to ensure image integrity + + - encryption and signature mechanisms + + - many things more + +Raw BIE data streams alone may therefore not be a suitable format for +document archiving and exchange. A standard format for this purpose +would typically combine a BIE representing the image data with an +additional header providing auxiliary information into one file. +Existing established multi-purpose file formats with a rich set of +auxiliary information attributes like TIFF could be extended easily to +also hold JBIG compressed data. + +On the other hand, in e.g. database applications, a BIE might be +stored directly in a binary variable-length field. Auxiliary +information would then be stored in other fields of the same record, +to simplify search operations. + + +2 Compressing an image + +2.1 Format of the source image + +To be processed by the jbig.c encoder, the image has to be present in +memory as separate bitmap planes. Each byte of a bitmap contains eight +pixels, where the most significant bit represents the leftmost of +these. Each line of a bitmap has to be stored in an integral number of +bytes. If the image width is not an integral multiple of eight, then +the final byte has to be padded with zero bits. + +For example the 23x5 pixels large single plane image: + + .XXXXX..XXX...X...XXX.. + .....X..X..X..X..X..... + .....X..XXX...X..X.XXX. + .X...X..X..X..X..X...X. + ..XXX...XXX...X...XXX.. + +is represented by the 15 bytes + + 01111100 11100010 00111000 + 00000100 10010010 01000000 + 00000100 11100010 01011100 + 01000100 10010010 01000100 + 00111000 11100010 00111000 + +or in hexadecimal notation + + 7c e2 38 04 92 40 04 e2 5c 44 92 44 38 e2 38 + +This is the format used in binary PBM files and it can also be handled +directly by the Xlib library of the X Window System. + +As JBIG can also handle images with multiple bit planes, the jbig.c +library functions accept and return always arrays of pointers to +bitmaps with one pointer per plane. + +For single-plane images, the standard recommends that a 0 pixel +represents the background and a 1 pixel represents the foreground +colour of an image, in other words, 0 is white and 1 is black for +scanned paper documents. For images with several bits per pixel, the +JBIG standard makes no recommendations about how various colours should +be encoded. + +For grey-scale images, by using a Gray code instead of a simple binary +weighted representation of the pixel intensity, some increase in +coding efficiency can be reached. + +A Gray code is also a binary representation of integer numbers, but it +has the property that the representations of the integer numbers i and +(i+1) always differ in exactly one bit. For example, the numbers 0 to +7 can be represented in normal binary code and Gray code as in the +following table: + + normal + number binary code Gray code + --------------------------------------- + 0 000 000 + 1 001 001 + 2 010 011 + 3 011 010 + 4 100 110 + 5 101 111 + 6 110 101 + 7 111 100 + +The form of Gray code shown above has the property that the second +half of the code (numbers 4 - 7) is simply the mirrored first half +(numbers 3 - 0) with the first bit set to one. This way, arbitrarily +large Gray codes can be generated quickly by mirroring the above +example and prefixing the first half with zeros and the second half +with ones as often as required. In grey-scale images, it is common +practise to use the all-0 code for black and the all-1 code for white. + +No matter whether a Gray code or a binary code is used for encoding a +pixel intensity in several bit planes, it always makes sense to store +the most significant (leftmost) bit in plane 0, which is transmitted +first. This way, a decoder could increase the precision of the +displayed pixel intensities while data is still being received and the +basic structure of the image will become visible as early as possible +during the transmission. + + +2.2 A simple compression application + +In order to use jbig.c in your application, just link libjbig.a to +your executable (on Unix systems just add -ljbig and -L. to the +command line options of your compiler, on other systems you will have +to write a new Makefile anyway), copy the file jbig.h into your source +directory and put the line + + #include "jbig.h" + +into your source code. + +The library interface follows object-oriented programming principles. +You have to declare a variable (object) + + struct jbg_enc_state s; + +which contains the current status of an encoder. Then you initialize +the encoder by calling the constructor function + + void jbg_enc_init(struct jbg_enc_state *s, unsigned long x, unsigned long y, + int pl, unsigned char **p, + void (*data_out)(unsigned char *start, size_t len, + void *file), + void *file); + +The parameters have the following meaning: + + s A pointer to the jbg_enc_state structure that you want + to initialize. + + x The width of your image in pixels. + + y The height of your image in pixels (lines). + + pl the number of bitmap planes you want to encode. + + p A pointer to an array of pl pointers, where each is again + pointing to the first byte of a bitmap as described in + section 2.1. + + data_out This is a call-back function that the encoder will + call during the compression process by in order to + deliver the BIE data to your application. The + parameters of the function data_out are a pointer + start to the new block of data being delivered, as + well as the number len of delivered bytes. The pointer + file is transparently delivered to data_out, as + specified in jbg_enc_init(). Typically, data_out will + write the BIE portion to a file, send it to a network + connection, or append it to some memory buffer. + + file A pointer parameter that is passed on to data_out() + and can be used, for instance, to allow data_out() to + distinguish by which compression task it has been + called in multi-threaded applications. + +In the simplest case, the compression is then started by calling the +function + + void jbg_enc_out(struct jbg_enc_state *s); + +which will deliver the complete BIE to data_out() in several calls. +After jbg_enc_out has returned, a call to the destructor function + + void jbg_enc_free(struct jbg_enc_state *s); + +will release any heap memory allocated by the previous functions. + + +A minimal example application, which sends the BIE of the above bitmap +to stdout, looks like this: + +--------------------------------------------------------------------------- +/* A sample JBIG encoding application */ + +#include <stdio.h> +#include "jbig.h" + +void output_bie(unsigned char *start, size_t len, void *file) +{ + fwrite(start, 1, len, (FILE *) file); + + return; +} + +int main() +{ + unsigned char bitmap[15] = { + /* 23 x 5 pixels, "JBIG" */ + 0x7c, 0xe2, 0x38, 0x04, 0x92, 0x40, 0x04, 0xe2, + 0x5c, 0x44, 0x92, 0x44, 0x38, 0xe2, 0x38 + }; + unsigned char *bitmaps[1] = { bitmap }; + struct jbg_enc_state se; + + jbg_enc_init(&se, 23, 5, 1, bitmaps, + output_bie, stdout); /* initialize encoder */ + jbg_enc_out(&se); /* encode image */ + jbg_enc_free(&se); /* release allocated resources */ + + return 0; +} +--------------------------------------------------------------------------- + +This software produces a 42 byte long BIE. (JBIG is not very good at +compressing extremely small images like in this example, because the +arithmetic encoder requires some startup data in order to generate +reasonable statistics which influence the compression process and +because there is some header overhead.) + + +2.3 More about compression + +If jbg_enc_out() is called directly after jbg_enc_init(), the +following default values are used for various compression parameters: + + - Only one single resolution layer is used, i.e. no progressive + mode. + + - The number of lines per stripe is selected so that approximately + 35 stripes per image are used (as recommended in annex C of the + standard together with the suggested adaptive template change + algorithm). However, not less than 2 and not more than 128 lines + are used in order to stay within the suggested minimum parameter + support range specified in annex A of the standard). + + - All optional parts of the JBIG algorithm are activated (TPBON, + TPDON and DPON). + + - The default resolution reduction table and the default deterministic + prediction table are used + + - The maximal vertical offset of the adaptive template pixel is 0 + and the maximal horizontal offset is 8 (mx = 8, my = 0). + +In order to change any of these default parameters, additional +functions have to be called between jbg_enc_init() and jbg_enc_out(). + +In order to activate progressive encoding, it is possible to specify +with + + void jbg_enc_layers(struct jbg_enc_state *s, int d); + +the number d of differential resolution layers which shall be encoded +in addition to the lowest resolution layer 0. For example, if a +document with 60-micrometer pixels has to be stored, and the lowest +resolution layer shall have 240-micrometer pixels, so that a screen +previewer can directly decompress only the required resolution, then a +call + + jbg_enc_layers(&se, 2); + +will cause three layers with 240, 120 and 60 micrometers resolution to +be generated. + +If the application does not know what typical resolutions are used and +simply wants to ensure that the lowest resolution layer will fit into +a given maximal window size, then as an alternative, a call to + + int jbg_enc_lrlmax(struct jbg_enc_state *s, unsigned long mwidth, + unsigned long mheight); + +will cause the library to automatically determine the suitable number +of resolutions so that the lowest resolution layer 0 will not be +larger than mwidth x mheight pixels. E.g. if one wants to ensure that +systems with a 640 x 480 pixel large screen can decode the required +resolution directly, then call + + jbg_enc_lrlmax(&se, 640, 480); + +The return value is the number of differential layers selected. + +After the number of resolution layers has been specified by calls to +jbg_enc_layers() or jbg_enc_lrlmax(), by default, all these layers +will be written into the BIE. This can be changed with a call to + + int jbg_enc_lrange(struct jbg_enc_state *s, int dl, int dh); + +Parameter dl specifies the lowest resolution layer and dh the highest +resolution layer that will appear in the BIE. For instance, if layer 0 +shall be written to the first BIE and layer 1 and 2 shall be written +to a second one, then before writing the first BIE, call + + jbg_enc_lrange(&se, 0, 0); + +and before writing the second BIE with jbg_enc_out(), call + + jbg_enc_lrange(&se, 1, 2); + +If any of the parameters is negative, it will be ignored. The return +value is the total number of differential layers that will represent +the input image. This way, jbg_enc_lrange(&se, -1, -1) can be used to +query the layer of the full image resolution. + +A number of other more exotic options of the JBIG algorithm can be +modified by calling + + void jbg_enc_options(struct jbg_enc_state *s, int order, int options, + long l0, int mx, int my); + +before calling jbg_enc_out(). + +The order parameter can be a combination of the bits JBG_HITOLO, +JBG_SEQ, JBG_ILEAVE and JBG_SMID and it determines in which order +the SDEs are stored in the BIE. The bits have the following meaning: + + JBG_HITOLO Usually, the lower resolution layers are stored before + the higher resolution layers, so that a decoder can + already start to display a low resolution version of + the full image once a prefix of the BIE has been + received. When this bit is set, however, the BIE will + contain the higher layers before the lower layers. This + avoids additional buffer memory in the encoder and is + intended for applications where the encoder is connected + to a database which can easily reorder the SDEs before + sending them to a decoder. Warning: JBIG decoders are + not expected to support the HITOLO option (e.g. the + jbig.c decoder currently does not) so you should + normally not use it. + + JBG_SEQ Usually, at first all stripes of one resolution layer + are written to the BIE and then all stripes of the next + layer, and so on. When the SEQ bit is set however, then + all layers of the first stripe will be written, + followed by all layers of the second stripe, etc. This + option also should normally never be required and is + not supported by the current jbig.c decoder. + + JBG_SMID In case there exist several bit planes, then the order of + the stripes is determined by three loops over all stripes, + all planes and all layers. When SMID is set, the loop + over all stripes is the middle loop. + + JBG_ILEAVE If this bit is set, then at first all layers of one + plane are written before the encoder starts with the next + plane. + +The above description may be somewhat confusing, but the following +table (see also Table 11 in ITU-T T.82) clarifies how the three bits +JBG_SEQ, JBIG_ILEAVE and JBG_SMID influence the ordering of the loops +over all stripes, planes and layers: + + + Loops: + JBG_SEQ JBG_ILEAVE JBG_SMID | Outer Middle Inner + ------------------------------------+--------------------------- + 0 0 0 | p d s + 0 1 0 | d p s + 0 1 1 | d s p + 1 0 0 | s p d + 1 0 1 | p s d + 1 1 0 | s d p + + p: plane, s: stripe, d: layer + + +By default, the order combination JBG_ILEAVE | JBG_SMID is used. + +The options value can contain the following bits, which activate +some of the optional algorithms defined by JBIG: + + JBG_LRLTWO Normally, in the lowest resolution layer, pixels + from three lines around the next pixel are used + in order to determine the context in which the next + pixel is encoded. Some people in the JBIG committee + seem to have argued that using only 2 lines will + make software implementations a little bit faster, + however others have argued that using only two lines + will decrease compression efficiency by around 5%. + As you might expect from a committee, now both + alternatives are allowed and if JBG_LRLTWO is set, + the slightly faster but 5% less well compressing two + line alternative is selected. God bless the committees. + Although probably nobody will ever need this option, + it has been implemented in jbig.c and is off by + default. + + JBG_TPDON This activates the "typical prediction" algorithm + for differential layers which avoids that large + areas of equal colour have to be encoded at all. + This is on by default and there is no good reason to + switch it off except for debugging or preparing data + for cheap JBIG hardware that might not support this + option. + + JBG_TPBON Like JBG_TPDON this activates the "typical prediction" + algorithm in the lowest resolution layer. Also activated + by default. + + JBG_DPON This bit activates for the differential resolution + layers the "deterministic prediction" algorithm, + which avoids that higher resolution layer pixels are + encoded when their value can already be determined + with the knowledge of the neighbour pixels, the + corresponding lower resolution pixels and the + resolution reduction algorithm. This is also + activated by default and one reason for deactivating + it would be if the default resolution reduction + algorithm were replaced by another one. + + JBG_DELAY_AT Use a slightly less efficient algorithm to determine + when an adaptive template change is necessary. With + this bit set, the encoder output is compatible to the + conformance test examples in cause 7.2 of ITU-T T.82. + Then all adaptive template changes are delayed until + the first line of the next stripe. This option is by + default deactivated and is only required for passing a + special compatibility test suite. + +In addition, parameter l0 in jbg_enc_options() allows you to specify +the number of lines per stripe in resolution layer 0. The parameters +mx and my change the maximal offset allowed for the adaptive template +pixel. JBIG-KIT now supports the full range of possible mx values up +to 127 in the encoder and decoder, but my is at the moment ignored and +always set to 0. As the standard requires of all decoder +implementations only to support maximum values mx = 16 and my = 0, +higher values should normally be avoided in order to guarantee +interoperability. The ITU-T T.85 profile for JBIG in fax machines +requires support for mx = 127 and my = 0. Default is mx = 8 and my = +0. If any of the parameters order, options, mx or my is negative, or +l0 is zero, then the corresponding current value remains unmodified. + +The resolution reduction and deterministic prediction tables can also +be replaced. However as these options are anyway only for experts, +please have a look at the source code of jbg_enc_out() and the struct +members dppriv and res_tab of struct jbg_enc_state for the details of +how to do this, in case you really need it. The functions +jbg_int2dppriv and jbg_dppriv2int are provided in order to convert the +DPTABLE data from the format used in the standard into the more +efficient format used internally by JBIG-KIT. + +If you want to encode a grey-scale image, you can use the library +function + + void jbg_split_planes(unsigned long x, unsigned long y, int has_planes, + int encode_planes, + const unsigned char *src, unsigned char **dest, + int use_graycode); + +It separates an image in which each pixel is represented by one or +more bytes into separate bit planes. The dest array of pointers to +these bit planes can then be handed over to jbg_enc_init(). The +variables x and y specify the width and height of the image in pixels, +and has_planes specifies how many bits per pixel are used. As each +pixel is represented by an integral number of consecutive bytes, of +which each contains up to eight bits, the total length of the input +image array src[] will therefore be x * y * ((has_planes + 7) / 8) +bytes. The pixels are stored as usually in English reading order, and +for each pixel the integer value is stored with the most significant +byte coming first (Bigendian). This is exactly the format used in raw +PGM files. In encode_planes, the number of bit planes that shall be +extracted can be specified. This allows for instance to extract only +the most significant 8 bits of a 12-bit image, where each pixel is +represented by two bytes, by specifying has_planes = 12 and +encode_planes = 8. If use_graycode is zero, then the binary code of +the pixel integer values will be used instead of the Gray code. Plane +0 contains always the most significant bit. + + +3 Decompressing an image + +Like with the compression functions, if you want to use the jbig.c +library, you have to put the line + + #include "jbig.h" + +into your source code and link your executable with libjbig.a. + +The state of a JBIG decoder is stored completely in a struct and you +will have to define a variable like + + struct jbg_dec_state sd; + +which is initialized by a call to + + void jbg_dec_init(struct jbg_dec_state *s); + +After this, you can directly start to pass data from the BIE to the decoder +by calling the function + + int jbg_dec_in(struct jbg_dec_state *s, unsigned char *data, size_t len, + size_t *cnt); + +The pointer data points to the first byte of a data block with length +len, which contains bytes from a BIE. It is not necessary to pass a +whole BIE at once to jbg_dec_in(), it can arrive fragmented in any way +by calling jbg_dec_in() several times. It is also possible to send +several BIEs concatenated to jbg_dec_in(), however these then have to +fit together. If you send several BIEs to the decoder, the lowest +resolution layer in each following BIE has to be the highest +resolution layer in the previous BIE plus one and the image sizes and +number of planes also have to fit together, otherwise jbg_dec_in() +will return the error JBG_ENOCONT after the header of the new BIE has +been received completely. + +If pointer cnt is not NULL, then the number of bytes actually read +from the data block will be stored there. In case the data block did +not contain the end of the BIE, then the value JBG_EAGAIN will be +returned and *cnt equals len. + +Once the end of a BIE has been reached, the return value of +jbg_dec_in() will be JBG_EOK. After this has happened, the functions +and macros + + unsigned long jbg_dec_getwidth(struct jbg_dec_state *s); + unsigned long jbg_dec_getheight(struct jbg_dec_state *s); + int jbg_dec_getplanes(struct jbg_dec_state *s); + unsigned char *jbg_dec_getimage(struct jbg_dec_state *s, int plane); + unsigned long jbg_dec_getsize(struct jbg_dec_state *s); + +can be used to query the dimensions of the now completely decoded +image and to get a pointer to all bitmap planes. The bitmaps are +stored as described in section 2.1. The function jbg_dec_getsize() +calculates the number of bytes which one bitmap requires. + +The function + + void jbg_dec_merge_planes(const struct jbg_dec_state *s, int use_graycode, + void (*data_out)(unsigned char *start, size_t len, + void *file), void *file); + +allows you to merge the bit planes that can be accessed individually +with jbg_dec_getimage() into an array with one or more bytes per pixel +(i.e., the format provided to jbg_split_planes()). If use_graycode is +zero, then a binary encoding will be used. The output array will be +delivered via the callback function data_out, exactly in the same way +in which the encoder provides the BIE. The function + + unsigned long jbg_dec_getsize_merged(const struct jbg_dec_state *s); + +determines how long the data array delivered by jbg_dec_merge_planes() +is going to be. + +Before calling jbg_dec_in() the first time, it is possible to specify with +a call to + + void jbg_dec_maxsize(struct jbg_dec_state *s, unsigned long xmax, + unsigned long ymax); + +an abort criterion for progressively encoded images. For instance if an +application will display a whole document on a screen which is 1024 x +768 pixels large, then this application should call + + jbg_dec_maxsize(&sd, 1024, 768); + +before the decoding process starts. If the image has been encoded in +progressive mode (i.e. with several resolution layers), then the +decoder will stop with a return value JBG_EOK_INTR after the largest +resolution layer that is still smaller than 1024 x 768. However this +is no guarantee that the image which can then be read out using +jbg_dec_getimage(), etc. is really not larger than the specified +maximal size. The application will have to check the size of the +image, because the decoder does not automatically apply a resolution +reduction if no suitable resolution layer is available in the BIE. + +If jbg_dec_in() returned JBG_EOK_INTR or JBG_EOK, then it is possible +to continue calling jbg_dec_in() with the remaining data in order to +either decode the remaining resolution layers of the current BIE or in +order to add another BIE with additional resolution layers. In both +cases, after jbg_dec_in() returned JBG_EOK_INTR or JBG_EOK, *cnt is +probably not equal to len and the remainder of the data block which +has not yet been processed by the decoder has to be delivered to +jbg_dec_in() again. + +If any other return value than JBG_EOK, JBG_EOK_INTR or JBG_EAGAIN +has been returned by jbg_dec_in(), then an error has occurred and + + void jbg_dec_free(struct jbg_dec_state *s); + +should be called in order to release any allocated memory. The +destructor jbg_dec_free() should of course also be called, once the +decoded bitmap returned by jbg_dec_getimage() is no longer required +and the memory can be released. + +The function + + const char *jbg_strerror(int errnum); + +returns a pointer to a short single line test message that explains +the return value of jbg_dec_in(). This message can be used in order to +provide the user a brief informative message about what when wrong +while decompressing a JBIG image. The po/ subdirectory contains *.po +files that translate the English ASCII strings returned by +jbg_strerror() into other languages (e.g., for use with GNU gettext). +The four least-significant bits of the return value of jbg_dec_in() +may contain additional detailed technical information about the exact +test that spotted the error condition (see source code for details), +i.e. more than the text message returned by jbg_strerror() reveals. +Therefore it may be useful to display the return value itself as a +hexadecimal number, in addition to the string returned by +jbg_strerror(). + +The current implementation of the jbig.c decoder has the following +limitations: + + - The maximal vertical offset MY of the adaptive template pixel + must be zero. + + - HITOLO and SEQ bits must not be set in the order value. + + - Not more than JBG_ATMOVES_MAX (currently set to 64) ATMOVE + marker segments can be handled per stripe. + + - the number D of differential layers must be less than 32 + +None of the above limitations can be exceeded by a JBIG data stream +that conforms to the ITU-T T.85 application profile for the use of +JBIG1 in fax machines. + +The current implementation of the jbig.c decoder does not impose any +limits on the image size that it will process, as long as malloc() is +able to allocate enough heap space for the resulting bitmaps. The only +exception is that jbg_dec_in() will return "Input data stream uses +unimplemented JBIG features" (JBG_EIMPL | 1) if Y_D equals 0xffffffff, +which is an extreme value commonly used to encode images according to +ITU-T T.85 where the height was unknown when the BIH was emitted. +After jbg_dec_in() received the 20-byte long BIH at the start of the +BIE, it will malloc() to allocate enough memory to hold the requested +image planes and layers. If you want to defend your application +against excessive image-size parameters in a received BIH, then do +make sure that you check X_D, Y_D, and P against appropriate safety +limits before handing over the BIH to jbg_dec_in(). + +There are two more limitations of the current implementation of the +jbig.c decoder that might cause problems with processing JBIG data +stream that conform to ITU-T T.85: + + - The jbig.c decoder was designed to operate incrementally. + Each received byte is processed immediately as soon as it arrives. + As a result, it does not look beyond the SDRST/SDNORM at the end + of all stripes for any immediately following NEWLEN marker that + might reduce the number of lines encoded by the current stripe. + However section 6.2.6.2 of ITU-T T.82 says that a NEWLEN marker + segment "could refer to a line in the immediately preceding stripe + due to an unexpected termination of the image or the use of only + such stripe", and ITU-T.85 explicitly suggests the use of this + for fax machines that start transmission before having encountered + the end of the page. + + - The image size initially indicated in the BIE header is used to + allocate memory for a bitmap of this size. This means that BIEs + that set initially Y_D = 0xffffffff (as suggested in ITU-T T.85 + for fax machines that do not know the height of the page at the + start of the transmission) cannot be decoded directly by this + version. + +For both issues, there is a workaround available: + +If you encounter a BIE that has in the header the VLENGTH=1 option bit +set, then first wait until you have received the entire BIE and stored +it in memory. Then call the function + + int jbg_newlen(unsigned char *bie, size_t len); + +where bie is a pointer to the first byte of the BIE and len its length +in bytes. This function will scan the entire BIE for the first NEWLEN +marker segment. It will then take the updated image-height value YD +from it and use it to overwrite the YD value in the BIE header. The +jbg_newlen() can return some of the same error codes as jbg_dec_in(), +namely JBG_EOK if everything went fine, JBG_EAGAIN is the data +provided is too short to be a valid BIE, JBG_EINVAL if a format error +was encountered, and JBG_EABORT if an ABORT marker segment was found. +After having patched the image-height value in the BIE using +jbg_newlen(), simply hand over the BIE as usual to jbg_dec_in(). + +In general, for applications where NEWLEN markers can appear, in +particular fax reception, you should consider using the jbig85.c +decoder instead, as it can process BIEs with NEWLEN markers in a +single pass. + +A more detailed description of the JBIG-KIT implementation is + + Markus Kuhn: Effiziente Kompression von bi-level Bilddaten durch + kontextsensitive arithmetische Codierung. Studienarbeit, Lehrstuhl + für Betriebssysteme, IMMD IV, Universität Erlangen-Nürnberg, + Erlangen, July 1995. (German, 62 pages) + <http://www.cl.cam.ac.uk/~mgk25/kuhn-sta.pdf> + +Please quote the above if you use JBIG-KIT in your research project. + +*** Happy compressing *** + +[end] diff --git a/converter/other/jbig/libjbig/jbig_ar.c b/converter/other/jbig/libjbig/jbig_ar.c new file mode 100644 index 00000000..d23a317d --- /dev/null +++ b/converter/other/jbig/libjbig/jbig_ar.c @@ -0,0 +1,417 @@ +/* + * Arithmetic encoder and decoder of the portable JBIG + * compression library + * + * Markus Kuhn -- http://www.cl.cam.ac.uk/~mgk25/jbigkit/ + * + * This module implements a portable standard C arithmetic encoder + * and decoder used by the JBIG lossless bi-level image compression + * algorithm as specified in International Standard ISO 11544:1993 + * and ITU-T Recommendation T.82. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * If you want to use this program under different license conditions, + * then contact the author for an arrangement. + */ + +#include <assert.h> +#include "jbig_ar.h" + +/* + * Probability estimation tables for the arithmetic encoder/decoder + * given by ITU T.82 Table 24. + */ + +static short lsztab[113] = { + 0x5a1d, 0x2586, 0x1114, 0x080b, 0x03d8, 0x01da, 0x00e5, 0x006f, + 0x0036, 0x001a, 0x000d, 0x0006, 0x0003, 0x0001, 0x5a7f, 0x3f25, + 0x2cf2, 0x207c, 0x17b9, 0x1182, 0x0cef, 0x09a1, 0x072f, 0x055c, + 0x0406, 0x0303, 0x0240, 0x01b1, 0x0144, 0x00f5, 0x00b7, 0x008a, + 0x0068, 0x004e, 0x003b, 0x002c, 0x5ae1, 0x484c, 0x3a0d, 0x2ef1, + 0x261f, 0x1f33, 0x19a8, 0x1518, 0x1177, 0x0e74, 0x0bfb, 0x09f8, + 0x0861, 0x0706, 0x05cd, 0x04de, 0x040f, 0x0363, 0x02d4, 0x025c, + 0x01f8, 0x01a4, 0x0160, 0x0125, 0x00f6, 0x00cb, 0x00ab, 0x008f, + 0x5b12, 0x4d04, 0x412c, 0x37d8, 0x2fe8, 0x293c, 0x2379, 0x1edf, + 0x1aa9, 0x174e, 0x1424, 0x119c, 0x0f6b, 0x0d51, 0x0bb6, 0x0a40, + 0x5832, 0x4d1c, 0x438e, 0x3bdd, 0x34ee, 0x2eae, 0x299a, 0x2516, + 0x5570, 0x4ca9, 0x44d9, 0x3e22, 0x3824, 0x32b4, 0x2e17, 0x56a8, + 0x4f46, 0x47e5, 0x41cf, 0x3c3d, 0x375e, 0x5231, 0x4c0f, 0x4639, + 0x415e, 0x5627, 0x50e7, 0x4b85, 0x5597, 0x504f, 0x5a10, 0x5522, + 0x59eb +}; + +static unsigned char nmpstab[113] = { + 1, 2, 3, 4, 5, 6, 7, 8, + 9, 10, 11, 12, 13, 13, 15, 16, + 17, 18, 19, 20, 21, 22, 23, 24, + 25, 26, 27, 28, 29, 30, 31, 32, + 33, 34, 35, 9, 37, 38, 39, 40, + 41, 42, 43, 44, 45, 46, 47, 48, + 49, 50, 51, 52, 53, 54, 55, 56, + 57, 58, 59, 60, 61, 62, 63, 32, + 65, 66, 67, 68, 69, 70, 71, 72, + 73, 74, 75, 76, 77, 78, 79, 48, + 81, 82, 83, 84, 85, 86, 87, 71, + 89, 90, 91, 92, 93, 94, 86, 96, + 97, 98, 99, 100, 93, 102, 103, 104, + 99, 106, 107, 103, 109, 107, 111, 109, + 111 +}; + +/* + * least significant 7 bits (mask 0x7f) of nlpstab[] contain NLPS value, + * most significant bit (mask 0x80) contains SWTCH bit + */ +static unsigned char nlpstab[113] = { + 129, 14, 16, 18, 20, 23, 25, 28, + 30, 33, 35, 9, 10, 12, 143, 36, + 38, 39, 40, 42, 43, 45, 46, 48, + 49, 51, 52, 54, 56, 57, 59, 60, + 62, 63, 32, 33, 165, 64, 65, 67, + 68, 69, 70, 72, 73, 74, 75, 77, + 78, 79, 48, 50, 50, 51, 52, 53, + 54, 55, 56, 57, 58, 59, 61, 61, + 193, 80, 81, 82, 83, 84, 86, 87, + 87, 72, 72, 74, 74, 75, 77, 77, + 208, 88, 89, 90, 91, 92, 93, 86, + 216, 95, 96, 97, 99, 99, 93, 223, + 101, 102, 103, 104, 99, 105, 106, 107, + 103, 233, 108, 109, 110, 111, 238, 112, + 240 +}; + +/* + * The next functions implement the arithmedic encoder and decoder + * required for JBIG. The same algorithm is also used in the arithmetic + * variant of JPEG. + */ + +/* marker codes */ +#define MARKER_STUFF 0x00 +#define MARKER_ESC 0xff + +void arith_encode_init(struct jbg_arenc_state *s, int reuse_st) +{ + int i; + + if (!reuse_st) + for (i = 0; i < 4096; s->st[i++] = 0) ; + s->c = 0; + s->a = 0x10000L; + s->sc = 0; + s->ct = 11; + s->buffer = -1; /* empty */ + + return; +} + + +void arith_encode_flush(struct jbg_arenc_state *s) +{ + unsigned long temp; + + /* find the s->c in the coding interval with the largest + * number of trailing zero bits */ + if ((temp = (s->a - 1 + s->c) & 0xffff0000L) < s->c) + s->c = temp + 0x8000; + else + s->c = temp; + /* send remaining bytes to output */ + s->c <<= s->ct; + if (s->c & 0xf8000000L) { + /* one final overflow has to be handled */ + if (s->buffer >= 0) { + s->byte_out(s->buffer + 1, s->file); + if (s->buffer + 1 == MARKER_ESC) + s->byte_out(MARKER_STUFF, s->file); + } + /* output 0x00 bytes only when more non-0x00 will follow */ + if (s->c & 0x7fff800L) + for (; s->sc; --s->sc) + s->byte_out(0x00, s->file); + } else { + if (s->buffer >= 0) + s->byte_out(s->buffer, s->file); + /* T.82 figure 30 says buffer+1 for the above line! Typo? */ + for (; s->sc; --s->sc) { + s->byte_out(0xff, s->file); + s->byte_out(MARKER_STUFF, s->file); + } + } + /* output final bytes only if they are not 0x00 */ + if (s->c & 0x7fff800L) { + s->byte_out((s->c >> 19) & 0xff, s->file); + if (((s->c >> 19) & 0xff) == MARKER_ESC) + s->byte_out(MARKER_STUFF, s->file); + if (s->c & 0x7f800L) { + s->byte_out((s->c >> 11) & 0xff, s->file); + if (((s->c >> 11) & 0xff) == MARKER_ESC) + s->byte_out(MARKER_STUFF, s->file); + } + } + + return; +} + + +void arith_encode(struct jbg_arenc_state *s, int cx, int pix) +{ + register unsigned lsz, ss; + register unsigned char *st; + long temp; + + assert(cx >= 0 && cx < 4096); + st = s->st + cx; + ss = *st & 0x7f; + assert(ss < 113); + lsz = lsztab[ss]; + +#if 0 + fprintf(stderr, "pix = %d, cx = %d, mps = %d, st = %3d, lsz = 0x%04x, " + "a = 0x%05lx, c = 0x%08lx, ct = %2d, buf = 0x%02x\n", + pix, cx, !!(s->st[cx] & 0x80), ss, lsz, s->a, s->c, s->ct, + s->buffer); +#endif + + if (((pix << 7) ^ s->st[cx]) & 0x80) { + /* encode the less probable symbol */ + if ((s->a -= lsz) >= lsz) { + /* If the interval size (lsz) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency, otherwise code the LPS + * as usual: */ + s->c += s->a; + s->a = lsz; + } + /* Check whether MPS/LPS exchange is necessary + * and chose next probability estimator status */ + *st &= 0x80; + *st ^= nlpstab[ss]; + } else { + /* encode the more probable symbol */ + if ((s->a -= lsz) & 0xffff8000L) + return; /* A >= 0x8000 -> ready, no renormalization required */ + if (s->a < lsz) { + /* If the interval size (lsz) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency: */ + s->c += s->a; + s->a = lsz; + } + /* chose next probability estimator status */ + *st &= 0x80; + *st |= nmpstab[ss]; + } + + /* renormalization of coding interval */ + do { + s->a <<= 1; + s->c <<= 1; + --s->ct; + if (s->ct == 0) { + /* another byte is ready for output */ + temp = s->c >> 19; + if (temp & 0xffffff00L) { + /* handle overflow over all buffered 0xff bytes */ + if (s->buffer >= 0) { + ++s->buffer; + s->byte_out(s->buffer, s->file); + if (s->buffer == MARKER_ESC) + s->byte_out(MARKER_STUFF, s->file); + } + for (; s->sc; --s->sc) + s->byte_out(0x00, s->file); + s->buffer = temp & 0xff; /* new output byte, might overflow later */ + assert(s->buffer != 0xff); + /* can s->buffer really never become 0xff here? */ + } else if (temp == 0xff) { + /* buffer 0xff byte (which might overflow later) */ + ++s->sc; + } else { + /* output all buffered 0xff bytes, they will not overflow any more */ + if (s->buffer >= 0) + s->byte_out(s->buffer, s->file); + for (; s->sc; --s->sc) { + s->byte_out(0xff, s->file); + s->byte_out(MARKER_STUFF, s->file); + } + s->buffer = temp; /* buffer new output byte (can still overflow) */ + } + s->c &= 0x7ffffL; + s->ct = 8; + } + } while (s->a < 0x8000); + + return; +} + + +void arith_decode_init(struct jbg_ardec_state *s, int reuse_st) +{ + int i; + + if (!reuse_st) + for (i = 0; i < 4096; s->st[i++] = 0) ; + s->c = 0; + s->a = 1; + s->ct = 0; + s->startup = 1; + s->nopadding = 0; + return; +} + +/* + * Decode and return one symbol from the provided PSCD byte stream + * that starts in s->pscd_ptr and ends in the byte before s->pscd_end. + * The context cx is a 12-bit integer in the range 0..4095. This + * function will advance s->pscd_ptr each time it has consumed all + * information from that PSCD byte. + * + * If a symbol has been decoded successfully, the return value will be + * 0 or 1 (depending on the symbol). + * + * If the decoder was not able to decode a symbol from the provided + * PSCD, then the return value will be -1, and two cases can be + * distinguished: + * + * s->pscd_ptr == s->pscd_end: + * + * The decoder has used up all information in the provided PSCD + * bytes. Further PSCD bytes have to be provided (via new values of + * s->pscd_ptr and/or s->pscd_end) before another symbol can be + * decoded. + * + * s->pscd_ptr == s->pscd_end - 1: + * + * The decoder has used up all provided PSCD bytes except for the + * very last byte, because that has the value 0xff. The decoder can + * at this point not yet tell whether this 0xff belongs to a + * MARKER_STUFF sequence or marks the end of the PSCD. Further PSCD + * bytes have to be provided (via new values of s->pscd_ptr and/or + * s->pscd_end), including the not yet processed 0xff byte, before + * another symbol can be decoded successfully. + * + * If s->nopadding != 0, the decoder will return -2 when it reaches + * the first two bytes of the marker segment that follows (and + * terminates) the PSCD, but before decoding the first symbol that + * depends on a bit in the input data that could have been the result + * of zero padding, and might, therefore, never have been encoded. + * This gives the caller the opportunity to lookahead early enough + * beyond a terminating SDNORM/SDRST for a trailing NEWLEN (as + * required by T.85) before decoding remaining symbols. Call the + * decoder again afterwards as often as necessary (leaving s->pscd_ptr + * pointing to the start of the marker segment) to retrieve any + * required remaining symbols that might depend on padding. + * + * [Note that each PSCD can be decoded into an infinitely long + * sequence of symbols, because the encoder might have truncated away + * an arbitrarily long sequence of trailing 0x00 bytes, which the + * decoder will append automatically as needed when it reaches the end + * of the PSCD. Therefore, the decoder cannot report any end of the + * symbol sequence and other means (external to the PSCD and + * arithmetic decoding process) are needed to determine that.] + */ + +int arith_decode(struct jbg_ardec_state *s, int cx) +{ + register unsigned lsz, ss; + register unsigned char *st; + int pix; + + /* renormalization */ + while (s->a < 0x8000 || s->startup) { + while (s->ct <= 8 && s->ct >= 0) { + /* first we can move a new byte into s->c */ + if (s->pscd_ptr >= s->pscd_end) { + return -1; /* more bytes needed */ + } + if (*s->pscd_ptr == 0xff) + if (s->pscd_ptr + 1 >= s->pscd_end) { + return -1; /* final 0xff byte not processed */ + } else { + if (*(s->pscd_ptr + 1) == MARKER_STUFF) { + s->c |= 0xffL << (8 - s->ct); + s->ct += 8; + s->pscd_ptr += 2; + } else { + s->ct = -1; /* start padding with zero bytes */ + if (s->nopadding) { + s->nopadding = 0; + return -2; /* subsequent symbols might depend on zero padding */ + } + } + } + else { + s->c |= (long)*(s->pscd_ptr++) << (8 - s->ct); + s->ct += 8; + } + } + s->c <<= 1; + s->a <<= 1; + if (s->ct >= 0) s->ct--; + if (s->a == 0x10000L) + s->startup = 0; + } + + st = s->st + cx; + ss = *st & 0x7f; + assert(ss < 113); + lsz = lsztab[ss]; + +#if 0 + fprintf(stderr, "cx = %d, mps = %d, st = %3d, lsz = 0x%04x, a = 0x%05lx, " + "c = 0x%08lx, ct = %2d\n", + cx, !!(s->st[cx] & 0x80), ss, lsz, s->a, s->c, s->ct); +#endif + + if ((s->c >> 16) < (s->a -= lsz)) + if (s->a & 0xffff8000L) + return *st >> 7; + else { + /* MPS_EXCHANGE */ + if (s->a < lsz) { + pix = 1 - (*st >> 7); + /* Check whether MPS/LPS exchange is necessary + * and chose next probability estimator status */ + *st &= 0x80; + *st ^= nlpstab[ss]; + } else { + pix = *st >> 7; + *st &= 0x80; + *st |= nmpstab[ss]; + } + } + else { + /* LPS_EXCHANGE */ + if (s->a < lsz) { + s->c -= s->a << 16; + s->a = lsz; + pix = *st >> 7; + *st &= 0x80; + *st |= nmpstab[ss]; + } else { + s->c -= s->a << 16; + s->a = lsz; + pix = 1 - (*st >> 7); + /* Check whether MPS/LPS exchange is necessary + * and chose next probability estimator status */ + *st &= 0x80; + *st ^= nlpstab[ss]; + } + } + + return pix; +} |