diff options
author | giraffedata <giraffedata@9d0c8265-081b-0410-96cb-a4ca84ce46f8> | 2008-12-28 19:13:20 +0000 |
---|---|---|
committer | giraffedata <giraffedata@9d0c8265-081b-0410-96cb-a4ca84ce46f8> | 2008-12-28 19:13:20 +0000 |
commit | 86f29c0eb54d03d4a5c8703cf8386ee5cb7a95c5 (patch) | |
tree | 3b30fd23aa36e1c8d7b55bf6663ceeaf5c6b5c8f /Makefile.config.in | |
parent | a2f8752d2bd1379f7bbe422027c041925802f029 (diff) | |
download | netpbm-mirror-86f29c0eb54d03d4a5c8703cf8386ee5cb7a95c5.tar.gz netpbm-mirror-86f29c0eb54d03d4a5c8703cf8386ee5cb7a95c5.tar.xz netpbm-mirror-86f29c0eb54d03d4a5c8703cf8386ee5cb7a95c5.zip |
Release 10.45.0 - rebase to current trunk
git-svn-id: http://svn.code.sf.net/p/netpbm/code/advanced@801 9d0c8265-081b-0410-96cb-a4ca84ce46f8
Diffstat (limited to 'Makefile.config.in')
-rw-r--r-- | Makefile.config.in | 636 |
1 files changed, 0 insertions, 636 deletions
diff --git a/Makefile.config.in b/Makefile.config.in deleted file mode 100644 index 66589856..00000000 --- a/Makefile.config.in +++ /dev/null @@ -1,636 +0,0 @@ -# This is a make file inclusion, to be included in all the Netpbm make -# files. - -# This file is meant to contain variable settings that customize the -# build for a particular target system configuration. - -# The distribution contains the file Makefile.config.in. You edit -# Makefile.config.in in ways relevant to your particular environment -# to create Makefile.config. The "configure" program will do this -# for you in simple cases. - -# Some of the variables that the including make file must set for this -# file to work: -# -# SRCDIR: The directory at the top of the Netpbm source tree. Note that -# this is typically a relative directory, and it must be relative to the -# make file that includes this file. - -DEFAULT_TARGET = nonmerge -#DEFAULT_TARGET = merge - -# Fiasco has some special requirements that make it fail to compile on -# some systems, and since it isn't very important, just set this to "N" -# and skip it on those systems unless you want to debug it and fix it. -# OpenBSD: -#BUILD_FIASCO = N -BUILD_FIASCO = Y - -# The following are commands for the build process to use. These values -# do not get built into anything. - -# The C compiler (including macro preprocessor) -#CC = gcc -# Note that 'cc' is usually an alias for whatever is the main compiler -# on a system, e.g. the GNU Compiler on Linux. -CC = cc - -# The linker. -LD = $(CC) -#LD = ld -#Tru64: -#LD = cc -#LD = gcc - -#If the linker identified above is a compiler that invokes a linker -#(as in 'cc foo.o -o foo'), set LINKERISCOMPILER. The main difference is -#that we expect a compiler to take linker options in the '-Wl,-opt1,val1' -#syntax whereas the actual linker would take '-opt1 val1'. -LINKERISCOMPILER=Y -#If $(LD) is 'ld': -#LINKERISCOMPILER=N - -#LINKER_CAN_DO_EXPLICIT_LIBRARY means the linker specified above can -#take a library as just another link object argument, as in 'ld -#pnmtojpeg.o /usr/local/lib/libjpeg.so ...' as opposed to requiring a -#-l option as in 'ld pnmtojpeg.o -L/usr/local/lib -l jpeg'. -#This variable controls how 'libopt' gets built. Note that with some -#linkers, you can specify a shared library explicitly, but then it has -#to live in that exact place at run time. That's not good enough for us. - -LINKER_CAN_DO_EXPLICIT_LIBRARY=N -#GNU: -#LINKER_CAN_DO_EXPLICIT_LIBRARY=Y - -# This is the name of the header file that declares the types -# uint32_t, etc. This name is used as #include $(INTTYPES_H) . -# Set to null if the types come automatically without including anything. - -# We have a report (2005.09.17) that on IRIX 5.3 with the native IDO -# cc, inttypes.h and sys/types.h conflict (and Netpbm programs include -# sys/types for other things), so for that environment, <inttypes.h> -# won't work, but "inttypes_netpbm.h" might. - -INTTYPES_H = <inttypes.h> -# Linux libc5: -#INTTYPES_H = <types.h> -# Solaris: -# Solaris has <sys/inttypes.h>, but it doesn't define int_fast2_t, etc. -#INTTYPES_H = "inttypes_netpbm.h" -# Others: -#INTTYPES_H = <sys/stdint.h> -#INTTYPES_H = <sys/types.h> -# The automatically generated Netpbm version: -#INTTYPES_H = "inttypes_netpbm.h" - -# HAVE_INT64 tells whether, assuming you include the header indicated by -# INTTYPES_H, you have the int64_t type and related stuff. (If you don't -# the build will omit certain code that does 64 bit computations). -HAVE_INT64 = Y -#HAVE_INT64 = N - -# CC and LD are for building the Netpbm programs, which are not necessarily -# intended to run on the same system on which Make is running. But when we -# build a build tool such as Libopt, it is meant to run only on the same -# system on which the Make is running. The variables below define programs -# to use to compile and link build tools. -CC_FOR_BUILD = $(CC) -LD_FOR_BUILD = $(LD) -CFLAGS_FOR_BUILD = $(CFLAGS) -LDFLAGS_FOR_BUILD = $(LDFLAGS) - -# MAKE is set automatically by Make to what was used to invoke Make. - -INSTALL = $(SRCDIR)/buildtools/install.sh -#Solaris: -#INSTALL = /usr/ucb/install -#Tru64: -#INSTALL = installbsd -#OSF1: -#INSTALL = $(SRCDIR)/buildtools/installosf -#Red Hat Linux: -#INSTALL = install - -# STRIPFLAG is the option you pass to the above install program to make it -# strip unnecessary information out of binaries. -STRIPFLAG = -s -# If you don't want to strip the binaries, just leave it null: -#STRIPFLAG = - -SYMLINK = ln -s -# At least some Windows environments don't have any concept of symbolic -# links, but direct copies are usually a passable alternative. -#SYMLINK = cp - -#MANPAGE_FORMAT is "nroff" or "cat". It determines in what format the -#pointer man pages are installed (ready to nroff, or ready to cat). -#A pointer man pages is just a single-paragraph pages that tells you there is -#no man page for the program, to look at the HTML documentation instead. -MANPAGE_FORMAT = nroff -#MANPAGE_FORMAT = cat - -AR = ar -RANLIB = ranlib -# IRIX, SCO don't have Ranlib: -#RANLIB = true - -# LEX is the beginning of a shell command that runs a Lex-like -# pattern matcher generator. Null string means there isn't any such -# command. That means the build will skip parts that need one. - -LEX = flex -# Solaris: -# LEX = flex -e -# Windows Mingw: -# LEX = -# -# LEX = lex - -# C compiler options - -# gcc: -# -ansi and -Werror should work too, but are not included -# by default because there's no point in daring the build to fail. -# -pedantic isn't a problem because it causes at worst a warning. -#CFLAGS = -O3 -ffast-math -pedantic -fno-common \ -# -Wall -Wno-uninitialized -Wmissing-declarations -Wimplicit \ -# -Wwrite-strings -Wmissing-prototypes -Wundef -# The merged programs have a main_XXX subroutine instead of main(), -# which would cause a warning with -Wmissing-declarations or -# -Wmissing-prototypes. -#CFLAGS_MERGE = -Wno-missing-declarations -Wno-missing-prototypes -# A user of DEC Tru64 4.0F in May 2000 needed -DLONG_32 for ppmtompeg, -# but word size-sensitive code was removed from parallel.c in September 2004. -# A user of Tru64 5.1A in July 2003 needed NOT to have -DLONG_32. In -# theory, you need this if on your system, long is 32 bits and int is not. -# But it may be completely irrelevant today. -#Tru64: -#CFLAGS = -O2 -std1 -DLONG_32 -#CFLAGS = -O2 -std1 -#AIX: -#CFLAGS= -O3 -#HP-UX: -#CFLAGS= -O3 -fPIC -#IRIX: -#CFLAGS= -n32 -O3 -#Amiga with GNU compiler: -#CFLAGS= -m68020-60 -ffast-math -mstackextend -# You can add -noixemul for Amiga and successfully compile most of the -# programs. (Of the remaining ones, if you can supply your own strtod() -# function, most of them will build with -noixemul). So try building -# with 'make --keep-going CADD=-noixemul' first, then just 'make' to build -# everything that failed for lack of the ixemul library in the first step. -# That way, the parts that don't required the ixemul library won't indicate -# a dependency on it. -#OpenBSD: -#CFLAGS = -I/usr/local/include - -# EXE is a suffix that the linker puts on any executable it generates. -# In cygwin, this is .exe and most programs deal with its existence without -# us having to know about it. Some don't though, so set this: - -EXE = -#Cygwin, DJGPP/Windows: -#EXE = .exe - -# linker options. - -# LDFLAGS is often set as an environment variable; A setting here overrides -# it. So either make sure you want to override it, or do a "LDFLAGS +=" here. - -# LDFLAGS is usually not the right place for a -L option, because we put -# LDFLAGS _before_ our own -L options, so it would cancel out our -# specific selection of libraries. For example, if you say -# LDFLAGS=/usr/local/lib and an old copy of the libnetpbm is in -# /usr/local/lib, then you'd be linking against that old copy instead of -# the copy you just built, which is located by a -L option later on the -# link command. LIBS is the right variable for adding -L options. LIBS -# goes after any of our make files' own -L options. - -# Eunice users may want to use -noshare so that the executables can -# run standalone: -#LDFLAGS += -noshare -#Tru64: -# Russ Allberry says on 2001.06.09 that -oldstyle_liblookup may be necessary -# to keep from finding an ancient system libjpeg.so that isn't compatible with -# NetPBM. Michael Long found that /usr/local/lib is not in the default -# search path, or not soon enough, and he was getting an old libjpeg that -# caused all the jpeg symbol references to be unresolved. He had installed -# a new libjpeg in /usr/local/lib. -#LDFLAGS += -call_shared -oldstyle_liblookup -L/usr/local/lib -#AIX: -#LDFLAGS += -L /usr/pubsw/lib -#HP-UX: -#LDFLAGS += -Wl,+b,/usr/pubsw/lib -#IRIX: -#LDFLAGS += -n32 - -# Linker options for created Netpbm shared libraries. - -# Here, $(SONAME) resolves to the soname for the shared library being created. -# The following are gcc options. This works on GNU libc systems. -LDSHLIB = -shared -Wl,-soname,$(SONAME) -# You need -nostart instead of -shared on BeOS. Though the BeOS compiler is -# ostensibly gcc, it has the -nostart option, which is not mentioned in gcc -# documentation and doesn't exist in at least one non-BeOS installation. -# BeOS doesn't have sonames built in. -#LDSHLIB = -nostart -#LDSHLIB = -G -# Solaris, SunOS with GNU Ld, SCO: -# These systems have no soname option. -#LDSHLIB = -shared -# Solaris with Sun Ld: -#LDSHLIB = -Wl,-Bdynamic,-G,-h,$(SONAME) -#Tru64: -#LDSHLIB = -shared -expect_unresolved "*" -#IRIX: -#LDSHLIB = -shared -n32 -#AIX GNU compiler/linker: -#LDSHLIB = -shared -#AIX Visual Age C: -#LDSHLIB = -qmkshrobj -#Mac OSX: -# According to experiments done by Peter A Crowley in May 2007, if -# libnetpbm goes in a standard place such as /usr/local/lib, -# programs need not be built with libnetpbm's location included. -# But if it goes elsewhere, the link-editor must include the -# location in the executable. It finds the runtime location by -# looking inside the library. The information in the library -# comes from the install_name option with which the library was -# built. It's an alternative to the -rpath option on other systems. -#LDSHLIB=-dynamiclib -#LDSHLIB=-dynamiclib -install_name $(NETPBMLIB_RUNTIME_PATH)/libnetpbm.$(MAJ).dylib - -# LDRELOC is the command to combine two .o files (relocateable object files) -# into a single .o file that can later be linked into something else. NONE -# means no such command is available. - -LDRELOC = NONE -# GNU Ld: -# Older GNU Ld misspells the option as --relocateable. Newer GNU Ld -# correctly spells it --relocatable. The abbreviation --reloc works on -# both. -#LDRELOC = ld --reloc -#LDRELOC = ld -r - - -# On older systems, you have to make shared libraries out of position -# independent code, so you need -fpic or fPIC here. (The rule is: if -# -fpic works, use it. If it bombs, go to fPIC). On newer systems, -# it isn't necessary, but can save real memory at the expense of -# execution speed. Without position independent code, the library -# loader may have to patch addresses into the executable text. On an -# older system, this would cause a program crash because the loader -# would be writing into read-only shared memory. But on newer -# systems, the system silently creates a private mapping of the page -# or segment being modified (the "copy on write" phenomenon). So it -# needs its own private real page frame. In one experiment, A second -# copy of Pbmtext used 16K less real memory when built with -fpic than -# when built without. 2001.06.02. - -# We have seen -fPIC required on IA64 and AMD64 machines (GNU -# compiler/linker). Build-time linking fails without it. I don't -# know why -- history seems to be repeating itself. 2005.02.23. - -CFLAGS_SHLIB = -# Gcc: -#CFLAGS_SHLIB = -fpic -#CFLAGS_SHLIB = -fPIC -# Sun compiler: -#CFLAGS_SHLIB = -Kpic -#CFLAGS_SHLIB = -KPIC - -# SHLIB_CLIB is the link option to include the C library in a shared library, -# normally "-lc". On typical systems, this serves no purpose. On some, -# though, it causes information about which C library to use to be recorded -# in the shared library and thus choose the correct library among several or -# avoid using an incompatible one. But on some systems, the link fails. -# On 2002.09.30, "John H. DuBois III" <spcecdt@armory.com> reports that on -# SCO OpenServer, he gets the following error message with -lc: -# -# -lc; relocations referenced ; from file(s) /usr/ccs/lib/libc.so(random.o); -# fatal error: relocations remain against allocatable but non-writable -# section: ; .text - -SHLIB_CLIB = -lc -# SCO: -#SHLIB_CLIB = - -# On some systems you have to build into an executable the list of -# directories where its dynamically linked libraries can be found at -# run time. This is typically done with a -R or -rpath linker -# option. Even on systems that don't require it, you might prefer to do -# that rather than set up environment variables or configuration files -# to tell the system where the libraries are. A "Y" here means to put -# the directory information in the executable at link time. - -NEED_RUNTIME_PATH = N -# Solaris, SunOS, NetBSD, AIX: -#NEED_RUNTIME_PATH = Y - -# RPATHOPTNAME is the option you use on the link command to specify -# a runtime search path for a shared library. It is meaningless unless -# NEED_RUNTIME_PATH is Y. -RPATHOPTNAME = -rpath - -# The following variables tell where your various libraries on which -# Netpbm depends live. The LIBxxx variable is a full file -# specification of the link library (not necessarily the library used -# at run time). e.g. "/usr/local/lib/graphics/libjpeg.so". It usually -# doesn't matter if the library prefix and suffix are right -- you can -# use "lib" and ".so" or ".a" regardless of what your system actually -# uses because these just turn into "-L" and "-l" linker options -# anyway. ".a" implies a static library for some purposes, though. -# If you don't have the library in question, use a value of NONE for -# LIBxxx and the build will simply skip the programs that require that -# library. If the library is in your linker's (or the Netpbm build's) -# default search path, leave off the directory part, e.g. "libjpeg.so". - -# The xxxHDR_DIR variable is the directory in which the interface -# headers for the library live (e.g. /usr/include). If they are in your -# compiler's default search path, set this variable to null. - -# This is where the Netpbm shared libraries will reside when Netpbm is -# fully installed. In some configurations, the Netpbm builder builds -# this information into the Netpbm executables. This does NOT affect -# where the Netpbm installer installs the libraries. A null value -# means the libraries are in a default search path used by the runtime -# library loader. -NETPBMLIB_RUNTIME_PATH = -#NETPBMLIB_RUNTIME_PATH = /usr/lib/netpbm - -# The TIFF library. See above. If you want to build the tiff -# converters, you must have the tiff library already installed. - -TIFFLIB = NONE -TIFFHDR_DIR = - -#TIFFLIB = libtiff.so -#TIFFHDR_DIR = /usr/include/libtiff -#NetBSD: -#TIFFLIB = $(LOCALBASE)/lib/libtiff.so -#TIFFHDR_DIR = $(LOCALBASE)/include -# OSF, Tru64: -#TIFFLIB = /usr/local1/DEC/lib/libtiff.so -#TIFFHDR_DIR = /usr/local1/DEC/include - -# Some TIFF libraries do Jpeg and/or Z (flate) compression and thus any -# program linked with the TIFF library needs a Jpeg and/or Z library. -# Some TIFF libraries have such library statically linked in, but others -# need it to be dynamically linked at program load time. -# Make this 'N' if youf TIFF library doesn't need such dynamic linking. -# As of 2005.01, the most usual build of the TIFF library appears to require -# both. -TIFFLIB_NEEDS_JPEG = Y -TIFFLIB_NEEDS_Z = Y - -# The JPEG library. See above. If you want to build the jpeg -# converters you must have the jpeg library already installed. - -# Tiff files can use JPEG compression, so the Tiff library can reference -# the JPEG library. If your Tiff library references a dynamic JPEG -# library, you must specify at least JPEGLIB here, or the Tiff -# converters will not build. Note that your Tiff library may have the -# JPEG stuff statically linked in, in which case you won't need -# JPEGLIB in order to build the Tiff converters. - -JPEGLIB = NONE -JPEGHDR_DIR = -#JPEGLIB = libjpeg.so -#JPEGHDR_DIR = /usr/include/jpeg -# Netbsd: -#JPEGLIB = ${LOCALBASE}/lib/libjpeg.so -#JPEGHDR_DIR = ${LOCALBASE}/include -# OSF, Tru64: -#JPEGLIB = /usr/local1/DEC/libjpeg.so -#JPEGHDR_DIR = /usr/local1/DEC/include -# Typical: -#JPEGLIB = /usr/local/lib/libjpeg.so -#JPEGHDR_DIR = /usr/local/include -# Don't build JPEG stuff: -#JPEGLIB = NONE - - -# The PNG library. See above. If you want to build the PNG -# converters you must have the PNG library already installed. - -# The PNG library, by convention starting around April 2002, gets installed -# with names that include a version number, such as libpng10.a and header -# files in /usr/include/libpng10. But there is conventionally an unnumbered -# alias (e.g. libpng.a, /usr/include/libpng) for the preferred version. -# -# Recent versions of the library (since some time in the 2002-2006 period) -# have an associated 'libpng-config' that tells how to link it. The make -# files will use that program if it exists (must be in the PATH). In that -# case, PNGLIB and PNGHDR_DIR are irrelevant, but PNGVER is still meaningful, -# because the make file runs 'libpng$(PNGVER)-config'. - -PNGLIB = NONE -PNGHDR_DIR = -PNGVER = -#PNGLIB = libpng$(PNGVER).so -#PNGHDR_DIR = /usr/include/libpng$(PNGVER) -# NetBSD: -#PNGLIB = $(LOCALBASE)/lib/libpng$(PNGVER).so -#PNGHDR_DIR = $(LOCALBASE)/include -# OSF/Tru64: -#PNGLIB = /usr/local1/DEC/lib/libpng$(PNGVER).so -#PNGHDR_DIR = /usr/local1/DEC/include - -# The zlib compression library. See above. You need it to build -# anything that needs the PNG library (see above). If you selected -# NONE for the PNG library, it doesn't matter what you specify here -- -# it won't get used. -# -# If you have 'libpng-config' (see above), these are irrelevant. - -ZLIB = NONE -ZHDR_DIR = -#ZLIB = libz.so - -# The JBIG lossless image compression library (aka JBIG-KIT): - -JBIGLIB = $(BUILDDIR)/converter/other/jbig/libjbig.a -JBIGHDR_DIR = $(SRCDIR)/converter/other/jbig - -# The Jasper JPEG-2000 image compression library (aka JasPer): -JASPERLIB = $(INTERNAL_JASPERLIB) -JASPERHDR_DIR = $(INTERNAL_JASPERHDR_DIR) -# JASPERDEPLIBS is the libraries (-l options or file names) on which -# The Jasper library depends -- i.e. what you have to link into any -# executable that links in the Jasper library. -JASPERDEPLIBS = -#JASPERDEPLIBS = -ljpeg - -# And the Utah Raster Toolkit (aka URT aka RLE) library: - -URTLIB = $(BUILDDIR)/urt/librle.a -URTHDR_DIR = $(SRCDIR)/urt - -# The X11 library has facilities for talking to an X Window System -# server. It is required by Pamx. - -X11LIB = NONE -X11HDR_DIR = - -#X11LIB = /usr/lib/libX11.so -#X11HDR_DIR = - -# The Linux SVGA library (Svgalib) is a facility for displaying graphics -# on the Linux console. It is required by Ppmsvgalib. - -LINUXSVGALIB = NONE -LINUXSVGAHDR_DIR = - -#LINUXSVGALIB = /usr/lib/libvga.so -#LINUXSVGAHDR_DIR = /usr/include/vgalib - -# If you don't want any network functions, set OMIT_NETWORK to "y". -# The only thing that requires network functions is the option in -# ppmtompeg to run it on multiple computers simultaneously. On some -# systems network functions don't work or we haven't figured out how to -# make them work, or they just aren't worth the effort. -OMIT_NETWORK = -#DJGPP/Windows, Tru64: -# (there's some minor header problem that prevents network functions from -# building on Tru64 2000.10.06) -#OMIT_NETWORK = y - -# These are -l options to link in the network libraries. Often, these are -# built into the standard C library, so this can be null. This is irrelevant -# if OMIT_NETWORK is "y". - -NETWORKLD = -# Solaris, SunOS: -#NETWORKLD = -lsocket -lnsl -# SCO: -#NETWORKLD = -lsocket, -lresolv - -VMS = -#VMS: -#VMS = yes - -# DONT_HAVE_PROCESS_MGMT is Y if this system doesn't have the usual -# Unix process management stuff - fork, wait, etc. N for a regular Unix -# system. -DONT_HAVE_PROCESS_MGMT = N - -# The following variables are used only by 'make install' (and the -# variants of it). Paths here don't, for example, get built into any -# programs. - -# This is where everything goes when you do 'make package', unless you -# override it by setting 'pkgdir' on the Make command line. -PKGDIR_DEFAULT = /tmp/netpbm - -# Subdirectory of the package directory ($(pkgdir)) in which man pages -# go. -PKGMANDIR = man - -# File permissions for installed files. -# Note that on some systems (e.g. Solaris), 'install' can't use the -# mnemonic permissions - you have to use octal. - -# binaries (pbmmake, etc) -INSTALL_PERM_BIN = 755 # u=rwx,go=rx -# shared libraries (libpbm.so, etc) -INSTALL_PERM_LIBD = 755 # u=rwx,go=rx -# static libraries (libpbm.a, etc) -INSTALL_PERM_LIBS = 644 # u=rw,go=r -# header files (pbm.h, etc) -INSTALL_PERM_HDR = 644 # u=rw,go=r -# man pages (pbmmake.1, etc) -INSTALL_PERM_MAN = 644 # u=rw,go=r -# data files (pnmtopalm color maps, etc) -INSTALL_PERM_DATA = 644 # u=rw,go=r - -# Specify the suffix that want the man pages to have. - -SUFFIXMANUALS1 = 1 -SUFFIXMANUALS3 = 3 -SUFFIXMANUALS5 = 5 - -#NETPBMLIBTYPE tells the kind of libraries that will get built to hold the -#Netpbm library functions. The value is used only in make file tests. -# "unixshared" means a unix-style shared library, typically named like -# libxyz.so.2.3 -NETPBMLIBTYPE = unixshared -# "unixstatic" means a unix-style static library, (like libxyz.a) -#NETPBMLIBTYPE = unixstatic -# "dll" means a Windows DLL shared library -#NETPBMLIBTYPE = dll -# "dylib" means a Darwin/Mac OS shared library -#NETPBMLIBTYPE = dylib - -#NETPBMLIBSUFFIX is the suffix used on whatever kind of library is -#selected above. All this is used for is to construct library names. -#The make files never examine the actual value. -NETPBMLIBSUFFIX = so - -# "a" is the suffix for unix-style static libraries. It is also -# traditionally used for shared libraries on AIX. The Visual Age C -# manual says sometimes .so works on AIX, and GNU software for AIX -# 5.1.0 does indeed use it. In our experiments, it works fine if you -# name the library file explicitly on the link, but isn't in the -l -# search order. If you name the library explicitly on the link, the -# library must live in exactly the same position at run time, so we -# can't use that. Therefore, you cannot build both static and shared -# libraries with AIX. You have to choose. -#NETPBMLIBSUFFIX = a -# For HP-UX shared libraries: -#NETPBMLIBSUFFIX = sl -# Darwin/Mac OS shared library: -#NETPBMLIBSUFFIX = dylib -# Windows shared library: -#NETPBMLIBSUFFIX = dll - -#STATICLIB_TOO is "y" to signify that you want a static library built -#and installed in addition to whatever library type you specified by -#NETPBMLIBTYPE. If NETPBMLIBTYPE specified a static library, -#STATICLIB_TOO simply has no effect. -STATICLIB_TOO = y -#STATICLIB_TOO = n - -#STATICLIBSUFFIX is the suffix that static libraries have. It's -#meaningless if you aren't building static libraries. -STATICLIBSUFFIX = a - -#SHLIBPREFIXLIST is a blank-delimited list of prefixes that a filename -#of a shared library may have on this system. Traditionally, it's -#just "lib", as in libc or libnetpbm. On Windows, though, varying -#prefixes are used when multiple alternative forms of a library are -#available. The first prefix in this list is what we use to name the -#Netpbm shared libraries. -# -# This variable controls how 'libopt' gets built. -# -SHLIBPREFIXLIST = lib -#Cygwin: -#SHLIBPREFIXLIST = cyg lib - -NETPBMSHLIBPREFIX = $(firstword $(SHLIBPREFIXLIST)) - -#DLLVER is used to version the DLLs built on cygwin or other -#windowsish platforms. We can't add this to LIBROOT, or we'd -#version the static libs (which is bad). We can't add this -#at the end of the name (like unix does with so numbers) because -#windows will only load dlls whose name ends in "dll". So, -#we have this variable, which becomes the end of the library "root" name -#for DLLs only. -# -# This variable controls how 'libopt' gets built. -# -DLLVER = -#Cygwin -#DLLVER = $(NETPBM_MAJOR_RELEASE) - -#NETPBM_DOCURL is the URL of the main documentation page for Netpbm. -#This is a directory which contains a file for each Netpbm program, -#library, and file type. E.g. The documentation for jpegtopnm might be in -#http://netpbm.sourceforge.net/doc/jpegtopnm.html . This value gets -#installed in the man pages (which say no more than to read the webpage) -#and in the Webman netpbm.url file. -NETPBM_DOCURL = http://netpbm.sourceforge.net/doc/ -#For a system with no web access, but a local copy of the doc: -#NETPBM_DOCURL = file:/usr/doc/netpbm/ - |