path: root/Doc/Zsh/builtins.yo

texinode(Shell Builtin Commands)(Zsh Line Editor)(Options)(Top)
chapter(Shell Builtin Commands)
ifzman(\
sect(Shell Builtin Commands)
)\
cindex(builtin commands)
cindex(commands, builtin)
def(prefix)(1)(\
findex(ARG1)
item(tt(ARG1) var(simple command))(
See noderef(Precommand Modifiers).
)\
)\
def(alias)(2)(\
findex(ARG1)
item(tt(ARG1))(
Same as tt(ARG2).
)\
)\
def(module)(2)(\
item(tt(ARG1))(
See ifzman(the section `The ARG2 Module' in zmanref(zshmodules))\
ifnzman(noderef(The ARG2 Module)).
)\
)\
def(zlecmd)(1)(\
item(tt(ARG1))(
See ifzman(the section `Zle Builtins' in zmanref(zshzle))\
ifnzman(noderef(Zle Builtins)).
)\
)\
startitem()
prefix(-)
findex(.)
item(tt(.) var(file) [ var(arg) ... ])(
Read commands from var(file) and execute them in the current shell
environment.

If var(file) does not contain a slash, or if tt(PATH_DIRS) is set,
the shell looks in the components of tt($path) to find the directory
containing var(file).  Files in the current directory are not read
unless `tt(.)' appears somewhere in tt($path).  If a file named
`var(file)tt(.zwc)' is found, is newer than var(file), and is the
compiled form (created with the tt(zcompile) builtin) of var(file),
then commands are read from that file instead of var(file).

If any arguments var(arg) are given,
they become the positional parameters; the old positional
parameters are restored when the var(file) is done executing.
The exit status is the exit status of the last command executed.
)
findex(NOTRANS(:))
cindex(expanding parameters)
cindex(parameters, expanding)
cindex(doing nothing)
item(tt(:) [ var(arg) ... ])(
This command does nothing, although normal argument expansions is performed
which may have effects on shell parameters.  A zero exit code is returned.
)
findex(alias)
cindex(aliases, defining)
cindex(aliases, listing)
item(tt(alias) [ {tt(PLUS()|tt(-))}tt(gmrL) ] [ var(name)[tt(=)var(value)] ... ])(
For each var(name) with a corresponding var(value), define an alias
with that value.  A trailing space in var(value) causes the next word
to be checked for alias expansion.  If the tt(-g) flag is present,
define a global alias; global aliases are expanded even if they do not
occur in command position.

For each var(name) with no var(value),
print the value of var(name), if any.  With no arguments, print all
currently defined aliases.  If the tt(-m) flag is given the arguments
are taken as patterns (they should be quoted to preserve them from being
interpreted as glob patterns), and the aliases matching these patterns
are printed.  When printing aliases and the tt(-g) or tt(-r) flags
are present, then restrict the printing to global or regular
aliases, respectively.  Using `tt(PLUS())' instead of `tt(-)', or ending
the option list with a single `tt(PLUS())', prevents the values of the
aliases from being printed.

If the tt(-L) flag is present, then print each
alias in a manner suitable for putting in a startup script.  The exit
status is nonzero if a var(name) (with no var(value)) is given for
which no alias has been defined.
)
findex(autoload)
cindex(functions, autoloading)
cindex(autoloading functions)
item(tt(autoload) [ {tt(PLUS())|tt(-)}tt(UXmt) ] [ tt(-wkz) ] [ var(name) ... ])(
Equivalent to tt(functions -u), with the exception of tt(-X)/tt(+X),
tt(-w), tt(-k) and tt(-z).

The flag tt(-X) may be used only inside a shell function, and may not be
followed by a var(name).  It causes the calling function to be marked for
autoloading and then immediately loaded and executed, with the current
array of positional parameters as arguments.  This replaces the previous
definition of the function.  If no function definition is found, an error
is printed and the function remains undefined and marked for autoloading.

The flag tt(+X) attempts to load each var(name) as an autoloaded function,
but does em(not) execute it.  The exit status is zero (success) if the
function was not previously defined em(and) a definition for it was found.
This does em(not) replace any existing definition of the function.  The
exit status is nonzero (failure) if the function was already defined or
when no definition was found.  In the latter case the function remains
undefined and marked for autoloading.

The flag tt(+X) may be combined with either tt(-k) or tt(-z) to make
the function be loaded using ksh-style or zsh-style autoloading,
respectively. If neither is given, the current setting of the
tt(KSH_AUTOLOAD) options determines how the function is loaded. With
ksh-style autoloading, the contents of the file will not be executed
immediately. Instead, the function created will contain the contents of 
the file plus a call to the function itself appended to it, thus given 
normal ksh autoloading behaviour on the first call to the function.

With the tt(-w) flag, the var(name)s are taken as names of files compiled
with the tt(zcompile) builtin, and all functions defined in them are
marked for autoloading.
)
findex(bg)
cindex(jobs, backgrounding)
xitem(tt(bg) [ var(job) ... ])
item(var(job) ... tt(&))(
Put each specified var(job) in the background,
or the current job if none is specified.
)
zlecmd(bindkey)
findex(break)
cindex(exiting loops)
cindex(loops, exiting)
item(tt(break) [ var(n) ])(
Exit from an enclosing tt(for), tt(while),
tt(until), tt(select) or tt(repeat) loop.  If var(n)
is specified, then break var(n) levels instead of just one.
)
findex(builtin)
item(tt(builtin) var(name) [ var(args) ... ])(
Executes the builtin var(name), with the given var(args).
)
alias(bye)(exit)
module(cap)(zsh/cap)
findex(cd)
cindex(directories, changing)
xitem(tt(cd) [ tt(-sLP) ] [ var(arg) ])
xitem(tt(cd) [ tt(-sLP) ] var(old) var(new))
item(tt(cd) [ tt(-sLP) ] {tt(PLUS())|tt(-)}var(n))(
Change the current directory.  In the first form, change the
current directory to var(arg), or to the value of tt($HOME) if
var(arg) is not specified.  If var(arg) is `tt(-)', change to the
value of tt($OLDPWD), the previous directory.
Otherwise, if a directory named var(arg) is not found in the current
directory and var(arg) does not begin with a slash, search each
component of the shell parameter tt(cdpath).  If no directory is found
and the option tt(CDABLE_VARS) is set, and a parameter named var(arg)
exists whose value begins with a slash, treat its value as the
directory.  In that case, the parameter is added to the named
directory hash table.

The second form of tt(cd) substitutes the string var(new)
for the string var(old) in the name of the current directory,
and tries to change to this new directory.

The third form of tt(cd) extracts an entry from the directory
stack, and changes to that directory.  An argument of the form
`tt(PLUS())var(n)' identifies a stack entry by counting from the left
of the list shown by the tt(dirs) command, starting with zero.
An argument of the form `tt(-)var(n)' counts from the right.
If the tt(PUSHD_MINUS) option is set, the meanings of `tt(PLUS())'
and `tt(-)' in this context are swapped.

If the tt(-s) option is specified, tt(cd) refuses to change the current
directory if the given pathname contains symlinks.  If the tt(-P) option
is given or the tt(CHASE_LINKS) option is set, symbolic links are resolved
to their true values.  If the tt(-L) option is given symbolic links are
followed regardless of the state of the tt(CHASE_LINKS) option.
)
alias(chdir)(cd)
module(clone)(zsh/clone)
prefix(command)
module(comparguments)(zsh/computil)
module(compcall)(zsh/compctl)
module(compctl)(zsh/compctl)
module(compdescribe)(zsh/computil)
module(compfiles)(zsh/computil)
module(compgroups)(zsh/computil)
module(compquote)(zsh/computil)
module(comptags)(zsh/computil)
module(comptry)(zsh/computil)
module(compvalues)(zsh/computil)
findex(continue)
cindex(loops, continuing)
cindex(continuing loops)
item(tt(continue) [ var(n) ])(
Resume the next iteration of the enclosing
tt(for), tt(while), tt(until), tt(select) or
tt(repeat) loop.  If var(n) is specified, break out of
var(n)-1 loops and resume at the var(n)th enclosing loop.
)
alias(declare)(typeset)
findex(dirs)
cindex(directory stack, printing)
item(tt(dirs) [ tt(-v) ] [ var(arg) ... ])(
With no arguments, print the contents of the directory stack.
If the tt(-v) option is given, number the directories
in the stack when printing.
Directories are added to this stack with the tt(pushd) command,
and removed with the tt(cd) or tt(popd) commands.
If arguments are specified, load them onto the directory stack,
replacing anything that was there, and push the current directory
onto the stack.
)
findex(disable)
cindex(disabling commands)
cindex(commands, disabling)
item(tt(disable) [ tt(-afmr) ] var(name) ...)(
Temporarily disable the var(name)d hash table elements.  The default
is to disable builtin commands.  This allows you to use an external
command with the same name as a builtin command.  The tt(-a) option
causes tt(disable) to act on aliases.  The tt(-f) option causes
tt(disable) to act on shell functions.  The tt(-r) options causes
tt(disable) to act on reserved words.  Without arguments all disabled
hash table elements from the corresponding hash table are printed.
With the tt(-m) flag the arguments are taken as patterns (which should be
quoted to prevent them from undergoing filename expansion), and all hash
table elements from the corresponding hash table matching these patterns
are disabled.  Disabled objects can be enabled with the tt(enable)
command.
)
findex(disown)
cindex(jobs, disowning)
xitem(tt(disown) [ var(job) ... ])
xitem(var(job) ... tt(&|))
item(var(job) ... tt(&!))(
Remove the specified var(job)s from the job table; the shell will
no longer report their status, and will not complain if you
try to exit an interactive shell with them running or stopped.
If no var(job) is specified, disown the current job.

If the var(job)s are currently stopped and the tt(AUTO_CONTINUE) option
is not set, a warning is printed containing information about how to
make them running after they have been disowned.  If one of the latter
two forms is used, the var(job)s will automatically be made running,
independent of the setting of the tt(AUTO_CONTINUE) option.
)
findex(echo)
item(tt(echo) [ tt(-neE) ] [ var(arg) ... ])(
Write each var(arg) on the standard output, with a space separating
each one.
If the tt(-n) flag is not present, print a newline at the end.
tt(echo) recognizes the following escape sequences:

startsitem()
sitem(tt(\a))(bell character)
sitem(tt(\b))(backspace)
sitem(tt(\c))(suppress final newline)
sitem(tt(\e))(escape)
sitem(tt(\f))(form feed)
sitem(tt(\n))(linefeed (newline))
sitem(tt(\r))(carriage return)
sitem(tt(\t))(horizontal tab)
sitem(tt(\v))(vertical tab)
sitem(tt(\\))(backslash)
sitem(tt(\0)var(NNN))(character code in octal)
sitem(tt(\x)var(NN))(character code in hexadecimal)
endsitem()

pindex(BSD_ECHO, use of)
The tt(-E) flag, or the tt(BSD_ECHO) option, can be used to disable
these escape sequences.  In the latter case, tt(-e) flag can be used to
enable them.
)
module(echotc)(zsh/termcap)
module(echoti)(zsh/terminfo)
findex(emulate)
cindex(compatibility, sh)
cindex(compatibility, ksh)
cindex(compatibility, csh)
cindex(sh, compatibility)
cindex(ksh, compatibility)
cindex(csh, compatibility)
item(tt(emulate) [ tt(-LR) ] {tt(zsh)|tt(sh)|tt(ksh)|tt(csh)})(
Set up zsh options to emulate the specified shell as much as possible.
bf(csh) will never be fully emulated.
If the argument is not one of the shells listed above, tt(zsh)
will be used as a default; more precisely, the tests performed on the
argument are the same as those used to determine the emulation at startup
based on the shell name, see
ifzman(\
the section `Compatibility' in zmanref(zshmisc)
)\
ifnzman(\
noderef(Compatibility)
)\
.  If the tt(-R) option is given, all options
are reset to their default value corresponding to the specified emulation
mode, except for certain options describing the interactive
environment; otherwise, only those options likely to cause portability
problems in scripts and functions are altered.  If the tt(-L) option
is given, the options tt(LOCAL_OPTIONS) and tt(LOCAL_TRAPS) will be set as
well, causing the effects of the tt(emulate) command and any tt(setopt) and
tt(trap) commands to be local to the immediately surrounding shell
function, if any; normally these options are turned off in all emulation
modes except tt(ksh).
)
findex(enable)
cindex(enabling commands)
cindex(commands, enabling)
item(tt(enable) [ tt(-afmr) ] var(name) ...)(
Enable the var(name)d hash table elements, presumably disabled
earlier with tt(disable).  The default is to enable builtin commands.
The tt(-a) option causes tt(enable) to act on aliases.  The tt(-f)
option causes tt(enable) to act on shell functions.  The tt(-r)
option causes tt(enable) to act on reserved words.  Without arguments
all enabled hash table elements from the corresponding hash table are
printed.  With the tt(-m) flag the arguments are taken as patterns
(should be quoted) and all hash table elements from the corresponding
hash table matching these patterns are enabled.  Enabled objects can be
disabled with the tt(disable) builtin command.
)
findex(eval)
cindex(evaluating arguments as commands)
item(tt(eval) [ var(arg) ... ])(
Read the arguments as input to the shell and execute the resulting
command in the current shell process.
)
prefix(exec)
findex(exit)
item(tt(exit) [ var(n) ])(
Exit the shell with the exit code specified by var(n); if none
is specified, use the exit code from the last command executed.
pindex(IGNORE_EOF, use of)
An EOF condition will also cause the shell to exit, unless
the tt(IGNORE_EOF) option is set.
)
findex(export)
item(tt(export) [ var(name)[tt(=)var(value)] ... ])(
The specified var(name)s are marked for automatic export
to the environment of subsequently executed commands.
Equivalent to tt(typeset -gx).
If a parameter specified does not
already exist, it is created in the global scope.
)
findex(false)
cindex(doing nothing, unsuccessfully)
item(tt(false) [ var(arg) ... ])(
Do nothing and return an exit code of 1.
)
findex(fc)
cindex(history, editing)
cindex(editing history)
xitem(tt(fc) [ tt(-e) var(ename) ] [ tt(-nlrdDfEim) ] [ var(old)tt(=)var(new) ... ] [ var(first) [ var(last) ] ])
item(tt(fc) tt(-ARWI) [ var(filename) ])(
Select a range of commands from var(first) to var(last) from the
history list.
The arguments var(first) and var(last) may be specified as a
number or as a string.  A negative number is used as an offset
to the current history event number.
A string specifies the most recent event beginning with the given string.
All substitutions var(old)tt(=)var(new), if any, are then performed
on the commands.

If the tt(-l) flag is given, the resulting commands are listed on
standard output.
If the tt(-m) flag is also given the first argument is taken as a
pattern (should be quoted) and only the history events matching this
pattern will be shown.
Otherwise the editor program var(ename) is invoked on a file containing
these history events.  If var(ename) is not given, the value
of the parameter tt(FCEDIT) is used.  If var(ename) is `tt(-)',
no editor is invoked.  When editing is complete, the edited
command is executed.

If var(first) is not specified, it will be set to -1 (the most recent
event), or to -16 if the tt(-l) flag is given.
If var(last) is not specified, it will be set to var(first),
or to -1 if the tt(-l) flag is given.

The flag tt(-r) reverses the order of the commands and the
flag tt(-n) suppresses command numbers when listing.
Also when listing, tt(-d) prints timestamps for each command, and
tt(-f) prints full time-date stamps.  Adding the tt(-E) flag
causes the dates to be printed as `var(dd)tt(.)var(mm)tt(.)var(yyyy)',
instead of the default `var(mm)tt(/)var(dd)tt(/)var(yyyy)'.
Adding the tt(-i) flag causes the dates to be printed in ISO8601
`var(yyyy)tt(-)var(mm)tt(-)var(dd)' format.
With the tt(-D) flag, tt(fc) prints elapsed times.

cindex(history, file)
cindex(file, history)
`tt(fc -R)' reads the history from the given file,
`tt(fc -W)' writes the history out to the given file,
and `tt(fc -A)' appends the history out to the given file.
If no filename is specified, the tt($HISTFILE) is assumed.
If the tt(-I) option is added to tt(-R), only those events that are
not already contained within the internal history list are added.
If the tt(-I) option is added to tt(-A) or tt(-W), only those
events that are new since last incremental append/write to
the history file are appended/written.
In any case, the created file will have no more than tt($SAVEHIST)
entries.
)
findex(fg)
cindex(jobs, foregrounding)
cindex(jobs, resuming)
xitem(tt(fg) [ var(job) ... ])
item(var(job) ...)(
Bring each specified var(job) in turn to the foreground.
If no var(job) is specified, resume the current job.
)
findex(float)
item(tt(float) [ {tt(PLUS())|tt(-)}tt(EFghlrtux) ] [ var(name)[tt(=)var(value)] ... ])(
Equivalent to tt(typeset -E), except that options irrelevant to floating
point numbers are not permitted.
)
findex(functions)
item(tt(functions) [ {tt(PLUS())|tt(-)}tt(UXmtu) ] [ var(name) ... ])(
Equivalent to tt(typeset -f).
)
module(getcap)(zsh/cap)
findex(getln)
cindex(line, reading)
cindex(reading a line)
item(tt(getln) [ tt(-AclneE) ] var(name) ...)(
Read the top value from the buffer stack and put it in
the shell parameter tt(name).  Equivalent to
tt(read -zr).
)
findex(getopts)
cindex(options, processing)
item(tt(getopts) var(optstring) var(name) [ var(arg) ... ])(
Checks the var(arg)s for legal options.  If the var(arg)s are omitted,
use the positional parameters.  A valid option argument
begins with a `tt(PLUS())' or a `tt(-)'.  An argument not beginning with
a `tt(PLUS())' or a `tt(-)', or the argument `tt(--)', ends the options.
var(optstring) contains the letters that tt(getopts)
recognizes.  If a letter is followed by a `tt(:)', that option
is expected to have an argument.  The options can be
separated from the argument by blanks.

Each time it is invoked, tt(getopts) places the option letter it finds
in the shell parameter var(name), prepended with a `tt(PLUS())' when
var(arg) begins with a `tt(PLUS())'.  The index of the next var(arg)
is stored in tt(OPTIND).  The option argument, if any,
is stored in tt(OPTARG).
vindex(OPTIND, use of)
vindex(OPTARG, use of)

The first option to be examined may be changed by explicitly assigning
to tt(OPTIND).  tt(OPTIND) has an initial value of tt(1), and is
normally reset to tt(1) upon exit from a shell function.  tt(OPTARG)
is not reset and retains its value from the most recent call to
tt(getopts).  If either of tt(OPTIND) or tt(OPTARG) is explicitly
unset, it remains unset, and the index or option argument is not
stored.  The option itself is still stored in var(name) in this case.

A leading `tt(:)' in var(optstring) causes tt(getopts) to store the
letter of any invalid option in tt(OPTARG), and to set var(name) to
`tt(?)' for an unknown option and to `tt(:)' when a required option is
missing.  Otherwise, tt(getopts) sets var(name) to `tt(?)' and prints
an error message when an option is invalid.  The exit status is
nonzero when there are no more options.
)
findex(hash)
item(tt(hash) [ tt(-Ldfmrv) ] [ var(name)[tt(=)var(value)] ] ...)(
tt(hash) can be used to directly modify the contents of the command
hash table, and the named directory hash table.  Normally one would
modify these tables by modifying one's tt(PATH)
(for the command hash table) or by creating appropriate shell parameters
(for the named directory hash table).
The choice of hash table to work on is determined by the tt(-d) option;
without the option the command hash table is used, and with the option the
named directory hash table is used.

Given no arguments, and neither the tt(-r) or tt(-f) options,
the selected hash table will be listed in full.

The tt(-r) option causes the selected hash table to be emptied.
It will be subsequently rebuilt in the normal fashion.
The tt(-f) option causes the selected hash table to be fully
rebuilt immediately.  For the command hash table this hashes
all the absolute directories in the tt(PATH),
and for the named directory hash table this adds all users' home directories.
These two options cannot be used with any arguments.

The tt(-m) option causes the arguments to be taken as patterns
(which should be quoted) and the elements of the hash table
matching those patterns are printed.  This is the only way to display
a limited selection of hash table elements.

For each var(name) with a corresponding var(value), put `var(name)' in
the selected hash table, associating it with the pathname `var(value)'.
In the command hash table, this means that
whenever `var(name)' is used as a command argument, the shell will try
to execute the file given by `var(value)'.
In the named directory hash table, this means
that `var(value)' may be referred to as `tt(~)var(name)'.

For each var(name) with no
corresponding var(value), attempt to add var(name) to the hash table,
checking what the appropriate tt(value) is in the normal manner for
that hash table.  If an appropriate tt(value) can't be found, then
the hash table will be unchanged.

The tt(-v) option causes hash table entries to be listed as they are
added by explicit specification.  If has no effect if used with tt(-f).

If the tt(-L) flag is present, then each hash table entry is printed in
the form of a call to hash.
)
alias(history)(fc -l)
findex(integer)
item(tt(integer) [ {tt(PLUS())|tt(-)}tt(ghilrtux) ] [ var(name)[tt(=)var(value)] ... ])(
Equivalent to tt(typeset -i), except that options irrelevant to
integers are not permitted.
)
findex(jobs)
xitem(tt(jobs) [ tt(-dlprs) ] [ var(job) ... ])
item(tt(jobs -Z) var(string))(
Lists information about each given job, or all jobs
if var(job) is omitted.  The tt(-l) flag lists process
IDs, and the tt(-p) flag lists process groups.
If the tt(-r) flag is specified only running jobs will be listed
and if the tt(-s) flag is given only stopped jobs are shown.
If the tt(-d) flag is given, the directory from which the job was
started (which may not be the current directory of the job) will also
be shown.

The tt(-Z) option replaces the shell's argument and environment space with
the given string, truncated if necessary to fit.  This will normally be
visible in tt(ps) (manref(ps)(1)) listings.  This feature is typically
used by daemons, to indicate their state.
)
findex(kill)
cindex(killing jobs)
cindex(jobs, killing)
xitem(tt(kill) [ tt(-s) var(signal_name) ] var(job) ...)
xitem(tt(kill) [ tt(-)var(sig) ] var(job) ...)
item(tt(kill) tt(-l) [ var(sig) ... ])(
Sends either tt(SIGTERM) or the specified signal to the given
jobs or processes.
Signals are given by number or by names, without the `tt(SIG)' prefix.
If the signal being sent is not `tt(KILL)' or `tt(CONT)', then the job
will be sent a `tt(CONT)' signal if it is stopped.
The argument var(job) can be the process ID of a job
not in the job list.
In the third form, tt(kill -l), if var(sig) is not
specified the signal names are listed.  Otherwise, for each
var(sig) that is a name, the corresponding signal number is
listed.  For each var(sig) that is a signal number or a number
representing the exit status of a process which was terminated or
stopped by a signal the name of the signal is printed.
)
findex(let)
item(tt(let) var(arg) ...)(
Evaluate each var(arg) as an arithmetic expression.
See noderef(Arithmetic Evaluation) for a description
of arithmetic expressions.  The exit status is 0 if the
value of the last expression is nonzero, and 1 otherwise.
)
findex(limit)
cindex(resource limits)
cindex(limits, resource)
item(tt(limit) [ tt(-hs) ] [ var(resource) [ var(limit) ] ] ...)(
Set or display resource limits.  Unless the tt(-s) flag is given,
the limit applies only the children of the shell.  If tt(-s) is
given without other arguments, the resource limits of the current
shell is set to the previously set resource limits of the children.

If var(limit) is not specified, print the current limit placed
on var(resource), otherwise
set the limit to the specified value.  If the tt(-h) flag
is given, use hard limits instead of soft limits.
If no var(resource) is given, print all limits.

var(resource) can be one of:

startsitem()
sitem(tt(addressspace))(Maximum amount of address space used.)
sitem(tt(aiomemorylocked))(Maximum amount of memory locked in RAM for AIO operations.)
sitem(tt(aiooperations))(Maximum number of AIO operations.)
sitem(tt(cachedthreads))(Maximum number of cached threads.)
sitem(tt(coredumpsize))(Maximum size of a core dump.)
sitem(tt(cputime))(Maximum CPU seconds per process.)
sitem(tt(datasize))(Maximum data size (including stack) for each process.)
sitem(tt(descriptors))(Maximum value for a file descriptor.)
sitem(tt(filesize))(Largest single file allowed.)
sitem(tt(maxproc))(Maximum number of processes.)
sitem(tt(maxpthreads))(Maximum number of threads per process.)
sitem(tt(memorylocked))(Maximum amount of memory locked in RAM.)
sitem(tt(memoryuse))(Maximum resident set size.)
sitem(tt(resident))(Maximum resident set size.)
sitem(tt(sockbufsize))(Maximum size of all socket buffers.)
sitem(tt(stacksize))(Maximum stack size for each process.)
sitem(tt(vmemorysize))(Maximum amount of virtual memory.)
endsitem()

Which of these resource limits are available depends on the system.
var(resource) can be abbreviated to any unambiguous prefix.

var(limit) is a number, with an optional scaling factor, as follows:

startsitem()
sitem(var(n)tt(h))(hours)
sitem(var(n)tt(k))(kilobytes (default))
sitem(var(n)tt(m))(megabytes or minutes)
sitem([var(mm)tt(:)]var(ss))(minutes and seconds)
endsitem()
)
findex(local)
item(tt(local) [ {tt(PLUS())|tt(-)}tt(AEFLRUZahilrtux) [var(n)]] [ var(name)[tt(=)var(value)] ] ...)(
Same as tt(typeset), except that the options tt(-g), and
tt(-f) are not permitted.  In this case the tt(-x) option does not force
the use of tt(-g), i.e. exported variables will be local to functions.
)
findex(log)
vindex(watch, use of)
cindex(watching users)
cindex(users, watching)
item(tt(log))(
List all users currently logged in who are affected by
the current setting of the tt(watch) parameter.
)
findex(logout)
item(tt(logout) [ var(n) ])(
Same as tt(exit), except that it only works in a login shell.
)
prefix(noglob)
findex(popd)
item(tt(popd) [ {tt(PLUS())|tt(-)}var(n) ])(
Remove an entry from the directory stack, and perform a tt(cd) to
the new top directory.  With no argument, the current top entry is
removed.  An argument of the form `tt(PLUS())var(n)' identifies a stack
entry by counting from the left of the list shown by the tt(dirs) command,
starting with zero.  An argument of the form tt(-n) counts from the right.
pindex(PUSHD_MINUS, use of)
If the tt(PUSHD_MINUS) option is set, the meanings of `tt(PLUS())' and
`tt(-)' in this context are swapped.
)
findex(print)
item(tt(print) [ tt(-bnrslzpNDPoOicm) ] [ tt(-u)var(n) ] [ tt(-R) [ tt(-en) ]] [ var(arg) ... ])(
With no flags or with flag `tt(-)', the arguments are printed on
the standard output as described by tt(echo), with the following differences:
the escape sequence `tt(\M-)var(x)' metafies the character
var(x) (sets the highest bit),
`tt(\C-)var(x)' produces a control character (`tt(\C-@)' and `tt(\C-?)' give the
characters NUL and delete), and `tt(\E)' is a synonym for `tt(\e)'.
Finally, if not in an escape
sequence, `tt(\)' escapes the following character and is not printed.

startitem()
item(tt(-r))(
Ignore the escape conventions of tt(echo).
)
item(tt(-R))(
Emulate the BSD tt(echo) command, which does not process escape sequences
unless the tt(-e) flag is given.  The tt(-n) flag suppresses the trailing
newline.  Only the tt(-e) and tt(-n) flags are recognized after
tt(-R); all other arguments and options are printed.
)
item(tt(-b))(
Recognize all the escape sequences defined for the tt(bindkey) command,
see 
ifzman(zmanref(zshzle))\
ifnzman(noderef(Zle Builtins))\
.
)
item(tt(-m))(
Take the first argument as a pattern (should be quoted), and remove
it from the argument list together with subsequent arguments that
do not match this pattern.
)
item(tt(-s))(
Place the results in the history list instead of on the standard output.
)
item(tt(-n))(
Do not add a newline to the output.
)
item(tt(-l))(
Print the arguments separated by newlines instead of spaces.
)
item(tt(-N))(
Print the arguments separated and terminated by nulls.
)
item(tt(-o))(
Print the arguments sorted in ascending order.
)
item(tt(-O))(
Print the arguments sorted in descending order.
)
item(tt(-i))(
If given together with tt(-o) or tt(-O), sorting is performed
case-independently.
)
item(tt(-c))(
Print the arguments in columns.
)
item(tt(-u)var(n))(
Print the arguments to file descriptor var(n).
)
item(tt(-p))(
Print the arguments to the input of the coprocess.
)
item(tt(-z))(
Push the arguments onto the editing buffer stack, separated by spaces;
no escape sequences are recognized.
)
item(tt(-D))(
Treat the arguments as directory names, replacing prefixes with tt(~)
expressions, as appropriate.
)
item(tt(-P))(
Perform prompt expansion (see
ifzman(zmanref(zshmisc))\
ifnzman(noderef(Prompt Expansion))\
).
)
enditem()
)
findex(pushd)
pindex(PUSHD_TO_HOME, use of)
pindex(PUSHD_MINUS, use of)
pindex(CDABLE_VARS, use of)
pindex(PUSHD_SILENT, use of)
xitem(tt(pushd) [ var(arg) ])
xitem(tt(pushd) var(old) var(new))
item(tt(pushd) {tt(PLUS())|tt(-)}var(n))(
Change the current directory, and push the old current directory
onto the directory stack.  In the first form, change the
current directory to var(arg).
If var(arg) is not specified, change to the second directory
on the stack (that is, exchange the top two entries), or
change to tt($HOME) if the tt(PUSHD_TO_HOME)
option is set or if there is only one entry on the stack.
Otherwise, var(arg) is interpreted as it would be by tt(cd).
The meaning of var(old) and var(new) in the second form is also
the same as for tt(cd).

The third form of tt(pushd) changes directory by rotating the
directory list.  An argument of the form `tt(PLUS())var(n)' identifies a stack
entry by counting from the left of the list shown by the tt(dirs)
command, starting with zero.  An argument of the form `tt(-)var(n)' counts
from the right.  If the tt(PUSHD_MINUS) option is set, the meanings
of `tt(PLUS())' and `tt(-)' in this context are swapped.

If the option tt(PUSHD_SILENT) is not set, the directory
stack will be printed after a tt(pushd) is performed.
)
findex(pushln)
item(tt(pushln) [ var(arg) ... ])(
Equivalent to tt(print -nz).
)
findex(pwd)
pindex(CHASE_LINKS, use of)
item(tt(pwd) [ tt(-rLP) ])(
Print the absolute pathname of the current working directory.
If the tt(-r) or the tt(-P) flag is specified, or the tt(CHASE_LINKS)
option is set and the tt(-L) flag is not given, the printed path will not
contain symbolic links.
)
alias(r)(fc -e -)
findex(read)
vindex(IFS, use of)
ifzman(xitem(tt(read) [ tt(-rzpqAclneEt) ] [ tt(-k) [ var(num) ] ]))
item(ifnzman(tt(read) [ tt(-rzpqAclneEt) ] [ tt(-k) [ var(num) ] ]) [ tt(-u)var(n) ] [ var(name)[tt(?)var(prompt)] ] [ var(name) ...  ])(
vindex(REPLY, use of)
vindex(reply, use of)
Read one line and break it into fields using the characters
in tt($IFS) as separators, except as noted below.
The first field is assigned to the first var(name), the second field
to the second var(name), etc., with leftover
fields assigned to the last var(name).
If var(name) is omitted then
tt(REPLY) is used for scalars and tt(reply) for arrays.

startitem()
item(tt(-r))(
Raw mode: a `tt(\)' at the end of a line does not signify line
continuation and backslashes in the line don't quote the following
character and are not removed.
)
item(tt(-q))(
Read only one character from the terminal and set var(name) to
`tt(y)' if this character was `tt(y)' or `tt(Y)' and to `tt(n)' otherwise.
With this flag set the return value is zero only if the character was
`tt(y)' or `tt(Y)'.  Note that this always reads from the terminal, even
if used with the tt(-p) or tt(-u) or tt(-z) flags or with redirected input.
This option may also be used within zle widgets.
)
item(tt(-k) [ var(num) ])(
Read only one (or var(num)) characters.  All are assigned to the first
var(name), without word splitting.  This flag is ignored when tt(-q) is
present.  Input is read from the terminal unless one of tt(-u) or tt(-p)
is present.  This option may also be used within zle widgets.

Note that var(num) must be in the argument word that follows tt(-k), not
in the same word.  See tt(-u).
)
item(tt(-z))(
Read one entry from the editor buffer stack and assign it to the first
var(name), without word splitting.  Text is pushed onto the stack with
`tt(print -z)' or with tt(push-line) from the line editor (see
ifzman(zmanref(zshzle))\
ifnzman(noderef(Zsh Line Editor))\
).  This flag is ignored when the tt(-k) or tt(-q) flags are present.
)
xitem(tt(-e))
item(tt(-E))(
The input read is printed (echoed) to the standard output.  If the tt(-e)
flag is used, no input is assigned to the parameters.
)
item(tt(-A))(
The first var(name) is taken as the name of an array and all words are
assigned to it.
)
xitem(tt(-c))
item(tt(-l))(
These flags are allowed only if called inside a
function used for completion (specified with the tt(-K) flag to
tt(compctl)).  If the tt(-c) flag is given, the words of the
current command are read. If the tt(-l) flag is given, the whole
line is assigned as a scalar.  If both flags are present, tt(-l)
is used and tt(-c) is ignored.
)
item(tt(-n))(
Together with tt(-c), the number of the word the cursor is on is
read.  With tt(-l), the index of the character the cursor is on is
read.  Note that the command name is word number 1, not word 0,
and that when the cursor is at the end of the line, its character
index is the length of the line plus one.
)
item(tt(-u)var(n))(
Input is read from file descriptor var(n), where var(n) is a single
digit and must em(not) be separated from tt(-u) by any whitespace.
)
item(tt(-p))(
Input is read from the coprocess.
)
item(tt(-t))(
Test if input is available before attempting to read; if none is, return
status 1 and do not set any variables.  This is not available when reading
from the editor buffer with tt(-z), when called from within completion
with tt(-c) or tt(-l), with tt(-q) which clears the input queue before
reading, or within zle where other mechanisms should be used to test for
input.
ifzman( )
Note that read does not attempt to alter the input processing mode.  The
default mode is canonical input, in which an entire line is read at a time,
so usually `tt(read -t)' will not read anything until an entire line has
been typed.  However, when reading from the terminal with tt(-k)
this is automatically handled; note that only availability of the first
character is tested, so that e.g. `tt(read -t -k 2)' can still block on the
second character.
)
enditem()
If the first argument contains a `tt(?)', the remainder of this
word is used as a var(prompt) on standard error when the shell
is interactive.

The value (exit status) of tt(read) is 1 when an end-of-file is
encountered, or when tt(-c) or tt(-l) is present and the command is
not called from a tt(compctl) function, or as described for tt(-q).
Otherwise the value is 0.

The behavior of some combinations of the tt(-k), tt(-p), tt(-q), tt(-u)
and tt(-z) flags is undefined.  Presently tt(-q) cancels all the others,
tt(-p) cancels tt(-u), tt(-k) cancels tt(-z), and otherwise tt(-z)
cancels both tt(-p) and tt(-u).

The tt(-c) or tt(-l) flags cancel any and all of tt(-kpquz).
)
cindex(parameters, marking readonly)
alias(readonly)(typeset -r)
alias(rehash)(hash -r)
findex(return)
cindex(functions, returning from)
item(tt(return) [ var(n) ])(
Causes a shell function or tt(.) script to return to
the invoking script with the return status specified by var(n).  If var(n)
is omitted, the return status is that of the last command
executed.

If tt(return) was executed from a trap in a tt(TRAP)var(NAL) function,
the effect is different for zero and non-zero return status.  With zero
status (or after an implicit return at the end of the trap), the shell
will return to whatever it was previously processing; with a non-zero
status, the shell will behave as interrupted except that the return
status of the trap is retained.  Note that the numeric value of the signal
which caused the trap is passed as the first argument, so the statement
`tt(return $((128PLUS()$1)))' will return the same status as if the signal
had not been trapped.
)
module(sched)(zsh/sched)
findex(set)
cindex(parameters, listing)
cindex(parameters, positional)
cindex(parameters, setting array)
cindex(array parameters, setting)
item(tt(set) [ {tt(PLUS())|tt(-)}var(options) | {tt(PLUS())|tt(-)}tt(o) var(option_name) ] ... [ {tt(PLUS())|tt(-)}tt(A) [ var(name) ] ] [ var(arg) ... ])(
Set the options for the shell and/or set the positional parameters, or
declare and set an array.  If the tt(-s) option is given, it causes the
specified arguments to be sorted before assigning them to the positional
parameters (or to the array var(name) if tt(-A) is used).  With tt(PLUS()s)
sort arguments in descending order.  For the meaning of the other flags, see
ifzman(zmanref(zshoptions))\
ifnzman(noderef(Options))\
.  Flags may be specified by name using the tt(-o) option.

If the tt(-A) flag is specified, var(name) is
set to an array containing the given var(arg)s. if tt(PLUS()A) is used and
var(name) is an array, the given arguments will replace the initial
elements of that array; if no var(name) is specified, all arrays are
printed.  Otherwise the positional parameters are set.  If no arguments are
given, then the names and values of all parameters are printed on the
standard output.  If the only argument is `tt(PLUS())',
the names of all parameters are printed.
)
module(setcap)(zsh/cap)
findex(setopt)
cindex(options, setting)
item(tt(setopt) [ {tt(PLUS())|tt(-)}var(options) | \
{tt(PLUS())|tt(-)}tt(o) var(option_name) ] [ var(name) ... ])(
Set the options for the shell.  All options specified either
with flags or by name are set.  If no arguments are supplied,
the names of all options currently set are printed.
If the tt(-m) flag is given the arguments are taken as patterns
(which should be quoted to protect them from filename expansion), and all
options with names matching these patterns are set.
)
findex(shift)
cindex(parameters, positional)
item(tt(shift) [ var(n) ] [ var(name) ... ])(
The positional parameters tt(${)var(n)PLUS()1tt(}) ... are renamed
to tt($1) ..., where var(n) is an arithmetic expression that
defaults to 1.
If any var(name)s are given then the arrays with these names are
shifted instead of the positional parameters.
)
findex(source)
item(tt(source) var(file) [ var(arg) ... ])(
Same as tt(.), except that the current directory is always searched and
is always searched first, before directories in tt($path).
)
module(stat)(zsh/stat)
findex(suspend)
cindex(shell, suspending)
cindex(suspending the shell)
item(tt(suspend) [ tt(-f) ])(
Suspend the execution of the shell (send it a tt(SIGTSTP))
until it receives a tt(SIGCONT).
Unless the tt(-f) option is given, this will refuse to suspend a login shell.
)
findex(test)
xitem(tt(test) [ var(arg) ... ])
item(tt([) [ var(arg) ... ] tt(]))(
Like the system version of tt(test).  Added for compatibility;
use conditional expressions instead (see noderef(Conditional Expressions)).
)
findex(times)
cindex(shell, timing)
cindex(timing the shell)
item(tt(times))(
Print the accumulated user and system times for the shell
and for processes run from the shell.
)
findex(trap)
cindex(signals, trapping)
cindex(trapping signals)
item(tt(trap) [ var(arg) [ var(sig) ... ] ])(
var(arg) is a series of commands (usually quoted to protect it from
immediate evaluation by the shell) to be read and executed when the shell
receives var(sig).  Each var(sig) can be given as a number
or as the name of a signal.
If var(arg) is `tt(-)', then all traps var(sig) are reset to their
default values.  If var(arg) is the empty string, then this signal
is ignored by the shell and by the commands it invokes.

If var(sig) is tt(ZERR) then var(arg) will be executed
after each command with a nonzero exit status.
If var(sig) is tt(DEBUG) then var(arg) will be executed
after each command.
If var(sig) is tt(0) or tt(EXIT)
and the tt(trap) statement is executed inside the body of a function,
then the command var(arg) is executed after the function completes.
If var(sig) is tt(0) or tt(EXIT)
and the tt(trap) statement is not executed inside the body of a function,
then the command var(arg) is executed when the shell terminates.

The tt(trap) command with no arguments prints a list of commands
associated with each signal.

Note that traps defined with the tt(trap) builtin are slightly different
from those defined as `tt(TRAP)var(NAL) () { ... }', as the latter have
their own function environment (line numbers, local variables, etc.) while
the former use the environment of the command in which they were called.
For example,

example(trap 'print $LINENO' DEBUG)

will print the line number of a command executed after it has run, while

example(TRAPDEBUG() { print $LINENO; })

will always print the number zero.
)
findex(true)
cindex(doing nothing, successfully)
item(tt(true) [ var(arg) ... ])(
Do nothing and return an exit code of 0.
)
findex(ttyctl)
cindex(tty, freezing)
item(tt(ttyctl) tt(-fu))(
The tt(-f) option freezes the tty, and tt(-u) unfreezes it.
When the tty is frozen, no changes made to the tty settings by
external programs will be honored by the shell, except for changes in the
size of the screen; the shell will
simply reset the settings to their previous values as soon as each
command exits or is suspended.  Thus, tt(stty) and similar programs have
no effect when the tty is frozen.  Without options it reports whether the
terminal is frozen or not.
)
findex(type)
item(tt(type) [ tt(-wfpams) ] var(name) ...)(
Equivalent to tt(whence -v).
)
findex(typeset)
cindex(parameters, setting)
cindex(parameters, declaring)
xitem(tt(typeset) [ {tt(PLUS())|tt(-)}tt(AEFLRUZafghilrtuxm) [var(n)]] [ \
var(name)[tt(=)var(value)] ... ])
item(tt(typeset) -T [ {tt(PLUS()|tt(-))}tt(LRUZrux) ] \
  var(SCALAR)[tt(=)var(value)] var(array))(
Set or display attributes and values for shell parameters.

A parameter is created for each var(name) that does not already refer
to one.  When inside a function, a new parameter is created for every
var(name) (even those that already exist), and is unset again when the
function completes.  See
ifzman(`Local Parameters' in zmanref(zshparam))\
ifnzman(noderef(Local Parameters))\
.  The same rules apply to special shell parameters, which
retain their special attributes when made local.

For each var(name)tt(=)var(value) assignment, the parameter
var(name) is set to var(value).  Note that arrays currently cannot be
assigned in tt(typeset) expressions, only scalars and integers.

For each remaining var(name) that refers to a parameter that is set, the
name and value of the parameter are printed in the form of an assignment.
Nothing is printed for newly-created parameters, or when any attribute
flags listed below are given along with the var(name).  Using `tt(PLUS())'
instead of minus to introduce an attribute turns it off.

If the tt(-T) option is given, exactly two (or zero) var(name)
arguments must be present.  They represent a scalar and an array (in
that order) that will be tied together in the manner of tt($PATH) and
tt($path).  In other words, an array present in the latter variable
appears as a scalar with the elements of the array joined by colons in
the former.  Only the scalar may have an initial value.  Both the
scalar and the array may otherwise be manipulated as normal.  If one
is unset, the other will automatically be unset too.  There is no way
of untying the variables without unsetting them, or converting the
type of one of them with another tt(typeset) command; tt(+T) does not
work, assigning an array to var(SCALAR) is an error, and assigning a
scalar to var(array) sets it to be a single-element array.  Note that
both `tt(typeset -xT ...)' and `tt(export -T ...)' work, but only the
scalar will be marked for export.

The tt(-g) (global) flag is treated specially: it means that any
resulting parameter will not be restricted to local scope.  Note that this
does not necessarily mean that the parameter will be global, as the flag
will apply to any existing parameter (even if unset) from an enclosing
function.  This flag does not affect the parameter after creation, hence it
has no effect when listing existing parameters, nor does the flag tt(+g)
have any effect except in combination with tt(-m) (see below).

If no var(name) is present, the names and values of all parameters are
printed.  In this case the attribute flags restrict the display to only
those parameters that have the specified attributes, and using `tt(PLUS())'
rather than `tt(-)' to introduce the flag suppresses printing of the values
of parameters when there is no parameter name.  Also, if the last option
is the word `tt(PLUS())', then names are printed but values are not.

If the tt(-m) flag is given the var(name) arguments are taken as patterns
(which should be quoted).  With no attribute flags, all parameters (or
functions with the tt(-f) flag) with matching names are printed.  Note that
tt(-m) is ignored if no patterns are given.  If the tt(+g) flag is combined
with tt(-m), a new local parameter is created for every matching parameter
that is not already local.  Otherwise tt(-m) applies all other flags or
assignments to the existing parameters.  Except when assignments are made
with var(name)tt(=)var(value), using tt(+m) forces the matching parameters
to be printed, even inside a function.

If no attribute flags are given and either no tt(-m) flag is present or
the tt(+m) form was used, each parameter name printed is preceded by a
list of the attributes of that parameter (tt(array), tt(association),
tt(exported), tt(integer), tt(readonly)).  If tt(+m) is used with attribute
flags, and all those flags are introduced with tt(PLUS()), the matching
parameter names are printed but their values are not.

The following attribute flags may be specified:

startitem()
item(tt(-A))(
The names refer to associative array parameters; see
ifzman(`Array Parameters' in zmanref(zshparam))\
ifnzman(noderef(Array Parameters))\
.
)
item(tt(-L))(
Left justify and remove leading blanks from var(value).
If var(n) is nonzero, it defines the width of the field;
otherwise it is determined by the width of the value of the first
assignment.
When the parameter is expanded, it is filled on the right with
blanks or truncated if necessary to fit the field.
Leading zeros are removed if the tt(-Z) flag is also set.
)
item(tt(-R))(
Right justify and fill with leading blanks.  If var(n) is nonzero
if defines the width of the field;
otherwise it is determined by the width of the value of the first
assignment.
When the parameter is expanded, the field is left filled with
blanks or truncated from the end.
)
item(tt(-U))(
For arrays (but not for associative arrays), keep only the first
occurrence of each duplicated value.  This may also be set for
colon-separated special parameters like tt(PATH) or tt(FIGNORE), etc.
This flag has a different meaning when used with tt(-f); see below.
)
item(tt(-Z))(
Right justify and fill with leading zeros if the first non-blank
character is a digit and the tt(-L) flag has not been set.
If var(n) is nonzero it defines the width of the field;
otherwise it is determined by the width of the value of the
first assignment.
)
item(tt(-a))(
The names refer to array parameters.  An array parameter may be
created this way, but it may not be assigned to in the tt(typeset)
statement.  When displaying, both normal and associative arrays are
shown.
)
item(tt(-f))(
The names refer to functions rather than parameters.  No assignments
can be made, and the only other valid flags are tt(-t), tt(-u) and
tt(-U).  The flag tt(-t) turns on execution tracing for this
function.  The tt(-u) and tt(-U) flags cause the function to be
marked for autoloading; tt(-U) also causes alias expansion to be
suppressed when the function is loaded.  The tt(fpath) parameter
will be searched to find the function definition when the function
is first referenced; see noderef(Functions).
)
item(tt(-h))(
Hide: only useful for special parameters (those marked `<S>' in the table in
ifzman(zmanref(zshparams))\
ifnzman(noderef(Parameters Set By The Shell))\
), and for local parameters with the same name as a special parameter,
though harmless for others.  A special parameter with this attribute will
not retain its special effect when made local.  Thus after `tt(typeset -h
PATH)', a function containing `tt(typeset PATH)' will create an ordinary
local parameter without the usual behaviour of tt(PATH).  Alternatively,
the local parameter may itself be given this attribute; hence inside a
function `tt(typeset -h PATH)' creates an ordinary local parameter and the
special tt(PATH) parameter is not altered in any way.  It is also possible
to create a local parameter using `tt(typeset +h )var(special)', where the
local copy of var(special) will retain its special properties regardless of
having the tt(-h) attribute.  Global special parameters loaded from shell
modules (currently those in tt(zsh/mapfile) and tt(zsh/parameter)) are
automatically given the tt(-h) attribute to avoid name clashes.
)
item(tt(-H))(
Hide value: specifies that tt(typeset) will not display the value of the
parameter when listing parameters; the display for such parameters is
always as if the `tt(PLUS())' flag had been given.  Use of the parameter is
in other respects normal, and the option does not apply if the parameter is
specified by name, or by pattern with the tt(-m) option.  This is on by
default for the parameters in the tt(zsh/parameter) and tt(zsh/mapfile)
modules.  Note, however, that unlike the tt(-h) flag this is also useful
for non-special parameters.
)
item(tt(-i))(
Use an internal integer representation.  If var(n) is nonzero it
defines the output arithmetic base, otherwise it is determined by the
first assignment.
)
item(tt(-E))(
Use an internal double-precision floating point representation.  On output
the variable will be converted to scientific notation.  If var(n) is
nonzero it defines the number of significant figures to display; the
default is ten.
)
item(tt(-F))(
Use an internal double-precision floating point representation.  On output
the variable will be converted to fixed-point decimal notation.  If var(n)
is nonzero it defines the number of digits to display after the decimal
point; the default is ten.
)
item(tt(-l))(
Convert the result to lower case whenever the parameter is expanded.
The value is em(not) converted when assigned.
)
item(tt(-r))(
The given var(name)s are marked readonly.  Note that if var(name) is a
special parameter, the readonly attribute can be turned on, but cannot then
be turned off.
)
item(tt(-t))(
Tags the named parameters.  Tags have no special meaning to the shell.
This flag has a different meaning when used with tt(-f); see above.
)
item(tt(-u))(
Convert the result to upper case whenever the parameter is expanded.
The value is em(not) converted when assigned.
This flag has a different meaning when used with tt(-f); see above.
)
item(tt(-x))(
Mark for automatic export to the environment of subsequently
executed commands.  If the option tt(GLOBAL_EXPORT) is set, this implies
the option tt(-g), unless tt(+g) is also explicitly given; in other words
the parameter is not made local to the enclosing function.  This is for
compatibility with previous versions of zsh.
)
enditem()
)
findex(ulimit)
cindex(resource limits)
cindex(limits, resource)
item(tt(ulimit) [ tt(-SHacdflmnpstv) [ var(limit) ] ... ])(
Set or display resource limits of the shell and the processes started by
the shell.  The value of var(limit) can be a number in the unit specified
below or the value `tt(unlimited)'.  If the tt(-H) flag is given use
hard limits instead of soft limits.  If the tt(-S) flag is given
together with the tt(-H) flag set both hard and soft limits.  If no
options are used, the file size limit (tt(-f)) is assumed.  If
var(limit) is omitted the current value of the specified resources are
printed.  When more than one resource values are printed the limit name and
unit is printed before each value.

startsitem()
sitem(tt(-a))(Lists all of the current resource limits.)
sitem(tt(-c))(512-byte blocks on the size of core dumps.)
sitem(tt(-d))(K-bytes on the size of the data segment.)
sitem(tt(-f))(512-byte blocks on the size of files written.)
sitem(tt(-l))(K-bytes on the size of locked-in memory.)
sitem(tt(-m))(K-bytes on the size of physical memory.)
sitem(tt(-n))(open file descriptors.)
sitem(tt(-s))(K-bytes on the size of the stack.)
sitem(tt(-t))(CPU seconds to be used.)
sitem(tt(-u))(processes available to the user.)
sitem(tt(-v))(K-bytes on the size of virtual memory.)
endsitem()
)
findex(umask)
cindex(umask)
item(tt(umask) [ tt(-S) ] [ var(mask) ])(
The umask is set to var(mask).  var(mask) can be either
an octal number or a symbolic value as described in manref(chmod)(1).
If var(mask) is omitted, the current value is printed.  The tt(-S)
option causes the mask to be printed as a symbolic value.  Otherwise,
the mask is printed as an octal number.  Note that in
the symbolic form the permissions you specify are those which are to be
allowed (not denied) to the users specified.
)
cindex(aliases, removing)
alias(unalias)(unhash -a)
cindex(functions, removing)
alias(unfunction)(unhash -f)
findex(unhash)
item(tt(unhash) [ tt(-adfm) ] var(name) ...)(
Remove the element named var(name) from an internal hash table.  The
default is remove elements from the command hash table.  The tt(-a)
option causes tt(unhash) to remove aliases.  The tt(-f) option causes
tt(unhash) to remove shell functions.  The tt(-d) options causes
tt(unhash) to remove named directories.  If the tt(-m) flag is given
the arguments are taken as patterns (should be quoted) and all elements
of the corresponding hash table with matching names will be removed.
)
findex(unlimit)
cindex(resource limits)
cindex(limits, resource)
item(tt(unlimit) [ tt(-hs) ] var(resource) ...)(
The resource limit for each var(resource) is set to the hard limit.
If the tt(-h) flag is given and the shell has appropriate privileges,
the hard resource limit for each var(resource) is removed.
The resources of the shell process are only changed if the tt(-s)
flag is given.
)
findex(unset)
cindex(parameters, unsetting)
item(tt(unset) [ tt(-fm) ] var(name) ...)(
Each named parameter is unset.
Local parameters remain local even if unset; they appear unset within scope,
but the previous value will still reappear when the scope ends.

Individual elements of associative array parameters may be unset by using
subscript syntax on var(name), which should be quoted (or the entire command
prefixed with tt(noglob)) to protect the subscript from filename generation.

If the tt(-m) flag is specified the arguments are taken as patterns (should
be quoted) and all parameters with matching names are unset.  Note that this
cannot be used when unsetting associative array elements, as the subscript
will be treated as part of the pattern.

tt(unset -f) is equivalent to tt(unfunction).
)
findex(unsetopt)
cindex(options, unsetting)
item(tt(unsetopt) [ {tt(PLUS())|tt(-)}var(options) | \
{tt(PLUS())|tt(-)}tt(o) var(option_name) ] [ var(name) ... ])(
Unset the options for the shell.  All options specified either
with flags or by name are unset.  If no arguments are supplied,
the names of all options currently unset are printed.
If the tt(-m) flag is given the arguments are taken as patterns
(which should be quoted to preserve them from being interpreted as glob
patterns), and all options with names matching these patterns are unset.
)
zlecmd(vared)
findex(wait)
cindex(waiting for jobs)
cindex(jobs, waiting for)
item(tt(wait) [ var(job) ... ])(
Wait for the specified jobs or processes.  If var(job) is not given
then all currently active child processes are waited for.
Each var(job) can be either a job specification or the process ID
of a job in the job table.
The exit status from this command is that of the job waited for.
)
findex(whence)
item(tt(whence) [ tt(-vcwfpams) ] var(name) ...)(
For each name, indicate how it would be interpreted if used as a
command name.

startitem()
item(tt(-v))(
Produce a more verbose report.
)
item(tt(-c))(
Print the results in a bf(csh)-like format.
This takes precedence over tt(-v).
)
item(tt(-w))(
For each var(name), print `var(name)tt(:) var(word)' where var(word)
is one of tt(alias), tt(builtin), tt(command), tt(function),
tt(hashed), tt(reserved) or tt(none), according as var(name)
corresponds to an alias, a built-in command, an external command, a
shell function, a command defined with the tt(hash) builtin, a
reserved word, or is not recognised.  This takes precedence over
tt(-v) and tt(-c).
)
item(tt(-f))(
Causes the contents of a shell function to be
displayed, which would otherwise not happen unless the tt(-c)
flag were used.
)
item(tt(-p))(
Do a path search for var(name)
even if it is an alias, reserved word, shell function or builtin.
)
item(tt(-a))(
Do a search for all occurrences of var(name)
throughout the command path.
Normally only the first occurrence is printed.
)
item(tt(-m))(
The arguments are taken as patterns (should be
quoted), and the information is displayed for each command matching one
of these patterns.
)
item(tt(-s))(
If a pathname contains symlinks, print the symlink-free pathname as well.
)
enditem()
)
findex(where)
item(tt(where) [ tt(-wpms) ] var(name) ...)(
Equivalent to tt(whence -ca).
)
findex(which)
item(tt(which) [ tt(-wpams) ] var(name) ...)(
Equivalent to tt(whence -c).
)
findex(zcompile)
cindex(.zwc files, creation)
cindex(compilation)
xitem(tt(zcompile) [ tt(-U) ] [ tt(-z) | tt(-k) ] [ tt(-R) | tt(-M) ] var(file) [ var(name) ... ])
xitem(tt(zcompile) tt(-ca) [ tt(-m) ] [ tt(-R) | tt(-M) ] var(file) [ var(name) ... ])
item(tt(zcompile -t) var(file) [ var(name) ... ])(
This builtin command can be used to compile functions or scripts,
storing the compiled form in a file, and to examine files containing
the compiled form.  This allows faster autoloading of functions and
execution of scripts by avoiding parsing of the text when the files
are read.

The first form (without the tt(-c), tt(-a) or tt(-t) options) creates a
compiled file.  If only the var(file) argument is given, the
output file has the name `var(file)tt(.zwc)' and will be placed in
the same directory as the var(file).  The shell will load the compiled
file instead of the normal function file when the function
is autoloaded; see
ifzman(\
the section `Autoloading Functions' in zmanref(zshfunc)
)\
ifnzman(\
noderef(Functions)
)\
for a description of how autoloaded functions are searched.  The
extension tt(.zwc) stands for `zsh word code'.

If there is at least one var(name) argument, all the named files
are compiled into the output var(file) given as the first argument.  If
var(file) does not end in tt(.zwc), this extension is automatically
appended.  Files containing multiple compiled functions are called `digest'
files, and are intended to be used as elements of the tt(FPATH)/tt(fpath)
special array.

The second form, with the tt(-c) or tt(-a) options, writes the compiled
definitions for all the named functions into var(file).  For tt(-c), the
names must be functions currently defined in the shell, not those marked
for autoloading.  Undefined functions that are marked for autoloading
may be written by using the tt(-a) option, in which case the tt(fpath)
is searched and the contents of the definition files for those
functions, if found, are compiled into var(file).  If both tt(-c) and
tt(-a) are given, names of both defined functions and functions marked
for autoloading may be given.  In either case, the functions in files
written with the tt(-c) or tt(-a) option will be autoloaded as if the
tt(KSH_AUTOLOAD) option were unset.

The reason for handling loaded and not-yet-loaded functions with
different options is that some definition files for autoloading define
multiple functions, including the function with the same name as the
file, and, at the end, call that function.  In such cases the output of
`tt(zcompile -c)' does not include the additional functions defined in
the file, and any other initialization code in the file is lost.  Using
`tt(zcompile -a)' captures all this extra information.

If the tt(-m) option is combined with tt(-c) or tt(-a),
the var(name)s are used as patterns and all functions whose names
match one of these patterns will be written. If no var(name) is given,
the definitions of all functions currently defined or marked as
autoloaded will be written.

The third form, with the tt(-t) option, examines an existing
compiled file.  Without further arguments, the names of the original
files compiled into it are listed.  The first line of output shows
the version of the shell which compiled the file and how the file
will be used (i.e. by reading it directly or by mapping it into memory).
With arguments, nothing is output and the return value is set to zero if
definitions for em(all) var(name)s were found in the compiled
file, and non-zero if the definition for at least one var(name) was not
found.

Other options:

startitem()
item(tt(-U))(
Aliases are not expanded when compiling the var(name)d files.
)
item(tt(-R))(
When the compiled file is read, its contents are copied into the
shell's memory, rather than memory-mapped (see tt(-M)).  This
happens automatically on systems that do not support memory mapping.

When compiling scripts instead of autoloadable functions, it is
often desirable to use this option; otherwise the whole file, including the
code to define functions which have already been defined, will
remain mapped, consequently wasting memory.
)
item(tt(-M))(
The compiled file is mapped into the shell's memory when read. This
is done in such a way that multiple instances of the shell running
on the same host will share this mapped file.  If neither tt(-R) nor
tt(-M) is given, the tt(zcompile) builtin decides what to do based
on the size of the compiled file.
)
xitem(tt(-k))
item(tt(-z))(
These options are used when the compiled file contains functions which
are to be autoloaded. If tt(-z) is given, the
function will be autoloaded as if the tt(KSH_AUTOLOAD) option is
em(not) set, even if it is set at the time the compiled file is
read, while if the tt(-k) is given, the function will be loaded as if
tt(KSH_AUTOLOAD) em(is) set.  If neither of these options is given, the
function will be loaded as determined by the setting of the
tt(KSH_AUTOLOAD) option at the time the compiled file is read.
ifzman( )
These options may also appear as many times as necessary between the listed
var(name)s to specify the loading style of all following functions, up to
the next tt(-k) or tt(-z).
)
ifnzman(enditem()
)
The created file always contains two versions of the compiled
format, one for big-endian machines and one for small-endian
machines.  The upshot of this is that the compiled file is machine
independent and if it is read or mapped, only one half of the file
is actually used (and mapped).
ifzman(enditem())
)
module(zformat)(zsh/zutil)
module(zftp)(zsh/zftp)
zlecmd(zle)
findex(zmodload)
cindex(modules, loading)
cindex(loading modules)
xitem(tt(zmodload) [ tt(-dL) ] [ ... ])
xitem(tt(zmodload -e) [ tt(-A) ] [ ... ])
xitem(tt(zmodload) [ tt(-a) [ tt(-bcpf) [ tt(-I) ] ] ] [ tt(-iL) ] ...)
xitem(tt(zmodload) tt(-u) [ tt(-abcdpf) [ tt(-I) ] ] [ tt(-iL) ] ...)
xitem(tt(zmodload) tt(-A) [ tt(-L) ] [ var(modalias)[tt(=)var(module)] ... ])
item(tt(zmodload) tt(-R) var(modalias) ... )(
Performs operations relating to zsh's loadable modules.
Loading of modules while the shell is running (`dynamical loading') is not
available on all operating systems, or on all installations on a particular
operating system, although the tt(zmodload) command itself is always
available and can be used to manipulate modules built into versions of the
shell executable without dynamical loading.

Without arguments the names of all currently loaded binary modules are
printed.  The tt(-L) option causes this list to be in the form of a
series of tt(zmodload) commands.  Forms with arguments are:

startitem()
xitem(tt(zmodload) [ tt(-i) ] var(name) ... )
item(tt(zmodload) tt(-u) [ tt(-i) ] var(name) ...)(
In the simplest case, tt(zmodload) loads a binary module.  The module must
be in a file with a name consisting of the specified var(name) followed by
a standard suffix, usually `tt(.so)' (`tt(.sl)' on HPUX).
If the module to be loaded is
already loaded and the tt(-i) option is given, the duplicate module is
ignored.  Otherwise tt(zmodload) prints an error message.

The var(name)d module is searched for in the same way a command is, using
tt($module_path) instead of tt($path).  However, the path search is
performed even when the module name contains a `tt(/)', which it usually does.
There is no way to prevent the path search.

With tt(-u), tt(zmodload) unloads modules.  The same var(name)
must be given that was given when the module was loaded, but it is not
necessary for the module to exist in the filesystem.
The tt(-i) option suppresses the error if the module is already
unloaded (or was never loaded).

Each module has a boot and a cleanup function.  The module
will not be loaded if its boot function fails.  Similarly a module
can only be unloaded if its cleanup function runs successfully.
)
xitem(tt(zmodload) tt(-d) [ tt(-L) ] [ var(name) ])
xitem(tt(zmodload) tt(-d) var(name) var(dep) ...)
item(tt(zmodload) tt(-ud) var(name) [ var(dep) ... ])(
The tt(-d) option can be used to specify module dependencies.  The modules
named in the second and subsequent arguments will be loaded before the
module named in the first argument.

With tt(-d) and one argument, all dependencies for that module are listed.
With tt(-d) and no arguments, all module dependencies are listed.  This
listing is by default in a Makefile-like format.  The tt(-L) option
changes this format to a list of tt(zmodload -d) commands.

If tt(-d) and tt(-u) are both used, dependencies are removed.  If only one
argument is given, all dependencies for that module are removed.
)
xitem(tt(zmodload) tt(-ab) [ tt(-L) ])
xitem(tt(zmodload) tt(-ab) [ tt(-i) ] var(name) [ var(builtin) ... ])
item(tt(zmodload) tt(-ub) [ tt(-i) ] var(builtin) ...)(
The tt(-ab) option defines autoloaded builtins.  It defines the specified
var(builtin)s.  When any of those builtins is called, the module specified
in the first argument is loaded.  If only the var(name) is given, one
builtin is defined, with the same name as the module.  tt(-i) suppresses
the error if the builtin is already defined or autoloaded, regardless of
which module it came from.

With tt(-ab) and no arguments, all autoloaded builtins are listed, with the
module name (if different) shown in parentheses after the builtin name.
The tt(-L) option changes this format to a list of tt(zmodload -a)
commands.

If tt(-b) is used together with the tt(-u) option, it removes builtins
previously defined with tt(-ab).  This is only possible if the builtin is
not yet loaded.  tt(-i) suppresses the error if the builtin is already
removed (or never existed).
)
xitem(tt(zmodload) tt(-ac) [ tt(-IL) ])
xitem(tt(zmodload) tt(-ac) [ tt(-iI) ] var(name) [ var(cond) ... ])
item(tt(zmodload) tt(-uc) [ tt(-iI) ] var(cond) ...)(
The tt(-ac) option is used to define autoloaded condition codes. The
var(cond) strings give the names of the conditions defined by the
module. The optional tt(-I) option is used to define infix condition
names. Without this option prefix condition names are defined.

If given no condition names, all defined names are listed (as a series of
tt(zmodload) commands if the tt(-L) option is given).

The tt(-uc) option removes definitions for autoloaded conditions.
)
xitem(tt(zmodload) tt(-ap) [ tt(-L) ])
xitem(tt(zmodload) tt(-ap) [ tt(-i) ] var(name) [ var(parameter) ... ])
item(tt(zmodload) tt(-up) [ tt(-i) ] var(parameter) ...)(
The tt(-p) option is like the tt(-b) and tt(-c) options, but makes
tt(zmodload) work on autoloaded parameters instead.
)
xitem(tt(zmodload) tt(-af) [ tt(-L) ])
xitem(tt(zmodload) tt(-af) [ tt(-i) ] var(name) [ var(function) ... ])
item(tt(zmodload) tt(-uf) [ tt(-i) ] var(function) ...)(
The tt(-f) option is like the tt(-b), tt(-p), and tt(-c) options, but
makes tt(zmodload) work on autoloaded math functions instead. 
)
xitem(tt(zmodload) tt(-a) [ tt(-L) ])
xitem(tt(zmodload) tt(-a) [ tt(-i) ] var(name) [ var(builtin) ... ])
item(tt(zmodload) tt(-ua) [ tt(-i) ] var(builtin) ...)(
Equivalent to tt(-ab) and tt(-ub).
)
item(tt(zmodload -e) [ tt(-A) ] [ var(string) ... ])(
The tt(-e) option without arguments lists all loaded modules; if the tt(-A)
option is also given, module aliases corresponding to loaded modules are
also shown.  With arguments only the return status is set to zero
if all var(string)s given as arguments are names of loaded modules
and to one if at least on var(string) is not the name of a
loaded module.  This can be used to test for the availability 
of things implemented by modules.  In this case, any aliases are
automatically resolved and the tt(-A) flag is not used.
)
item(tt(zmodload) tt(-A) [ tt(-L) ] [ var(modalias)[tt(=)var(module)] ... ])(
For each argument, if both var(modalias) and var(module) are given,
define var(modalias) to be an alias for the module var(module).
If the module var(modalias) is ever subsequently requested, either via a
call to tt(zmodload) or implicitly, the shell will attempt to load
var(module) instead.  If var(module) is not given, show the definition of
var(modalias).  If no arguments are given, list all defined module aliases.
When listing, if the tt(-L) flag was also given, list the definition as a
tt(zmodload) command to recreate the alias.

The existence of aliases for modules is completely independent of whether
the name resolved is actually loaded as a module: while the alias exists,
loading and unloading the module under any alias has exactly the same
effect as using the resolved name, and does not affect the connection
between the alias and the resolved name which can be removed either by
tt(zmodload -R) or by redefining the alias.  Chains of aliases (i.e. where
the first resolved name is itself an alias) are valid so long as these are
not circular.  As the aliases take the same format as module names, they
may include path separators:  in this case, there is no requirement for any
part of the path named to exist as the alias will be resolved first.  For
example, `tt(any/old/alias)' is always a valid alias.

Dependencies added to aliased modules are actually added to the resolved
module; these remain if the alias is removed.  It is valid to create an
alias whose name is one of the standard shell modules and which resolves to
a different module.  However, if a module has dependencies, it
will not be possible to use the module name as an alias as the module will
already be marked as a loadable module in its own right.

Apart from the above, aliases can be used in the tt(zmodload) command
anywhere module names are required.  However, aliases will not be
shown in lists of loaded modules with a bare `tt(zmodload)'.
)
item(tt(zmodload) tt(-R) var(modalias) ... )(
For each var(modalias) argument that was previously defined as a module
alias via tt(zmodload -A), delete the alias.  If any was not defined, an
error is caused and the remainder of the line is ignored.
)
enditem()

Note that tt(zsh) makes no distinction between modules that were linked 
into the shell and modules that are loaded dynamically. In both cases
this builtin command has to be used to make available the builtins and
other things defined by modules (unless the module is autoloaded on
these definitions). This is true even for systems that don't support
dynamic loading of modules.
)
module(zparseopts)(zsh/zutil)
module(zprof)(zsh/zprof)
module(zpty)(zsh/zpty)
module(zregexparse)(zsh/zutil)
module(zstyle)(zsh/zutil)
enditem()