mailto(pws@ifh.de)\ whentxt(notableofcontents())\ COMMENT(-- mytt is like tt but adds quotes `like this' for plain text --)\ def(mytt)(1)(\ whentxt(`ARG1')\ whenhtml(tt(ARG1))\ whenlatex(tt(ARG1))\ whenms(tt(ARG1))\ whensgml(tt(ARG1)))\ COMMENT(-- mybf/em are like bf/em but add *emphasis* for text too --)\ def(mybf)(1)(\ whentxt(*ARG1*)\ whenhtml(bf(ARG1))\ whenlatex(bf(ARG1))\ whenms(bf(ARG1))\ whensgml(bf(ARG1)))\ def(myem)(1)(\ whentxt(_ARG1_)\ whenhtml(em(ARG1))\ whenlatex(em(ARG1))\ whenms(em(ARG1))\ whensgml(em(ARG1)))\ COMMENT(-- mydit is like dit but no `o' for text mode --)\ def(mydit)(1)(\ whenlatex(dit(ARG1))\ whenhtml(dit(ARG1))\ whentxt(ARG1)\ whenman(dit(ARG1))\ whenms(dit(ARG1))\ whensgml(dit(ARG1)))\ COMMENT(-- myeit is like eit but fancier text formatting --)\ def(myeit)(0)(\ whenlatex(eit())whenhtml(eit())whenman(eit())whenms(eit())whensgml(eit())\ whentxt(eit()CHAR(41)))\ def(myeitd)(0)(\ whenlatex(eit())whenhtml(eit())whenman(eit())whenms(eit())whensgml(eit())\ whentxt(eit().))\ COMMENT(-- don't want headers for text, USENET headers must come first --)\ def(myreport)(3)(\ whentxt(report()()())\ whenhtml(report(ARG1)(ARG2)(ARG3))\ whenlatex(report(ARG1)(ARG2)(ARG3))\ whenman(report(ARG1)(ARG2)(ARG3))\ whenms(report(ARG1)(ARG2)(ARG3))\ whensgml(report(ARG1)(ARG2)(ARG3))) myreport(Z-Shell Frequently-Asked Questions)(Peter Stephenson)(1999/05/24) COMMENT(-- the following are for Usenet and must appear first)\ description(\ mydit(Archive-Name:) unix-faq/shell/zsh mydit(Last-Modified:) 1999/07/30 mydit(Submitted-By:) email(pws@ibmth.df.unipi.it (Peter Stephenson)) mydit(Version:) $Id: FAQ.yo,v 1.1.1.16 1999/12/10 18:42:38 akr Exp $ mydit(Posting-Frequency:) Monthly mydit(Copyright:) (C) P.W. Stephenson, 1995--1999 (see end of document) ) This document contains a list of frequently-asked (or otherwise significant) questions concerning the Z-shell, a command interpreter for many UNIX systems which is freely available to anyone with FTP access. Zsh is among the most powerful freely available Bourne-like shell for interactive use. If you have never heard of mytt(sh), mytt(csh) or mytt(ksh), then you are probably better off to start by reading a general introduction to UNIX rather than this document. If you just want to know how to get your hands on the latest version, skip to question link(1.6)(16); if you want to know what to do with insoluble problems, go to link(5.2)(52). whentxt(Notation: Quotes `like this' are ordinary textual quotation marks. Other uses of quotation marks are input to the shell.) COMMENT(-- need to do this specially in text since it should go here --) whentxt(Contents: Chapter 1: Introducing zsh and how to install it 1.1. Sources of information 1.2. What is it? 1.3. What is it good at? 1.4. On what machines will it run? (Plus important compilation notes) 1.5. What's the latest version? 1.6. Where do I get it? 1.7. I don't have root access: how do I make zsh my login shell? Chapter 2: How does zsh differ from...? 2.1. sh and ksh? 2.2. csh? 2.3. Why do my csh aliases not work? (Plus other alias pitfalls.) 2.4. tcsh? 2.5. bash? 2.6. Shouldn't zsh be more/less like ksh/(t)csh? Chapter 3: How to get various things to work 3.1. Why does `$var' where `var="foo bar"' not do what I expect? 3.2. In which startup file do I put...? 3.3. What is the difference between `export' and the ALL_EXPORT option? 3.4. How do I turn off spelling correction/globbing for a single command? 3.5. How do I get the meta key to work on my xterm? 3.6. How do I automatically display the directory in my xterm title bar? 3.7. How do I make the completion list use eight bit characters? 3.8. Why do the cursor (arrow) keys not work? 3.9. Why does my terminal act funny in some way? 3.10. Why does zsh not work in an Emacs shell mode any more? 3.11. Why do my autoloaded functions not autoload [the first time]? 3.12. How does base arithmetic work? 3.13. How do I get a newline in my prompt? 3.14. Why does `bindkey ^a command-name' or 'stty intr ^-' do something funny? 3.15. Why can't I bind \C-s and \C-q any more? 3.16. How do I execute command `foo' within function `foo'? 3.17. Why do history substitutions with single bangs do something funny? 3.18. Why does zsh kill off all my background jobs when I logout? 3.19. How do I list all my history entries? 3.20. How does the alternative loop syntax, e.g. mytt(while {...} {...}) work? 3.21. Why is my history not being saved? 3.22. How do I get a variable's value to be evaluated as another variable? 3.23. How do I prevent the prompt overwriting output when there is no newline? 3.24. What's wrong with cut and paste on my xterm? Chapter 4: The mysteries of completion 4.1. What is completion? 4.2. What sorts of things can be completed? 4.3. How does zsh deal with ambiguous completions? 4.4. How do I complete in the middle of words / just what's before the cursor? 4.5. How do I get started with programmable completion? 4.6. And if programmable completion isn't good enough? Chapter 5: The future of zsh 5.1. What bugs are currently known and unfixed? (Plus recent important changes) 5.2. Where do I report bugs, get more info / who's working on zsh? 5.3. What's on the wish-list? 5.4. Will zsh have problems in the year 2000? Acknowledgments Copyright --- End of Contents --- ) chapter(Introducing zsh and how to install it) sect(Sources of information) label(11) Information on zsh is available via the World Wide Web. The URL is url(http://sunsite.auc.dk/zsh/)(http://sunsite.auc.dk/zsh/) (note the \ change of address from the end of April 1998). The server provides this FAQ and much else and is now maintained by Karsten Thygesen and others (mail \ email(zsh@sunsite.auc.dk) with any related messages). The FAQ is at \ url(http://sunsite.auc.dk/zsh/FAQ/)(http://sunsite.auc.dk/zsh/FAQ/) . The site also contains some contributed zsh scripts and functions; we are delighted to add more, or simply links to your own collection. This document was originally written in YODL, allowing it to be converted easily into various other formats. The master source file lives at url(http://sunsite.auc.dk/zsh/FAQ/zshfaq.yo) (http://sunsite.auc.dk/zsh/FAQ/zshfaq.yo) and the plain text version can be found at url(http://sunsite.auc.dk/zsh/FAQ/zshfaq.txt) (http://sunsite.auc.dk/zsh/FAQ/zshfaq.txt) . Another useful source of information is the collection of FAQ articles posted frequently to the Usenet news groups comp.unix.questions, comp.unix.shells and comp.answers with answers to general questions about UNIX. The fifth of the seven articles deals with shells, including zsh, with a brief description of differences. There is also a separate FAQ on shell differences and how to change your shell. Usenet FAQs are available via FTP from rtfm.mit.edu and mirrors and also on the World Wide Web; see description( mydit(USA) url(http://www.cis.ohio-state.edu/hypertext/faq/usenet/top.html) (http://www.cis.ohio-state.edu/hypertext/faq/usenet/top.html) mydit(UK) url(http://www.lib.ox.ac.uk/internet/news/faq/comp.unix.shell.html) (http://www.lib.ox.ac.uk/internet/news/faq/comp.unix.shell.html) mydit(Netherlands) url(http://www.cs.uu.nl/wais/html/na-dir/unix-faq/shell/.html) (http://www.cs.uu.nl/wais/html/na-dir/unix-faq/shell/.html) ) You can also get it via email by emailing \ email(mail-server@rtfm.mit.edu) with, in the body of the message, mytt(send faqs/unix-faq/shell/zsh). The latest version of this FAQ is also available directly from any of the zsh archive sites listed in question link(1.6)(16). There is now a preliminary version of a reference card for zsh 3.0, which you can find (while it's being developed) at url(http://www.ifh.de/~pws/computing/refcard.ps) (http://www.ifh.de/~pws/computing/refcard.ps) This is optimised for A4 paper. The tt(LaTeX) source is in the same place with the extension tt(.tex). It is not a good place from which to learn zsh for the first time. (As a method of reading the following in Emacs, you can type tt(\M-2 \C-x $) to make all the indented text vanish, then tt(\M-0 \C-x $) when you are on the title you want.) For any more eclectic information, you should contact the mailing list: see question link(5.2)(52). sect(What is it?) Zsh is a UNIX command interpreter (shell) which of the standard shells most resembles the Korn shell (ksh); its compatibility with the 1988 Korn shell has been gradually increasing. It includes enhancements of many types, notably in the command-line editor, options for customising its behaviour, filename globbing, features to make C-shell (csh) users feel more at home and extra features drawn from tcsh (another `custom' shell). It was written by Paul Falstad when a student at Princeton; however, Paul doesn't maintain it any more and enquiries should be sent to the mailing list (see question link(5.2)(52)). Zsh is distributed under a standard Berkeley style copyright. For more information, the files Doc/intro.txt or Doc/intro.troff included with the source distribution are highly recommended. A list of features is given in FEATURES, also with the source. sect(What is it good at?) Here are some things that zsh is particularly good at. No claim of exclusivity is made, especially as shells copy one another, though in the areas of command line editing and globbing zsh is well ahead of the competition. I am not aware of a major interactive feature in any other freely-available shell which zsh does not also have (except smallness). itemize( it() Command line editing: itemize( it() programmable completion: incorporates the ability to use the full power of zsh globbing (compctl -g), it() multi-line commands editable as a single buffer (even files!), it() variable editing (vared), it() command buffer stack, it() print text straight into the buffer for immediate editing (print -z), it() execution of unbound commands, it() menu completion, it() variable, editing function and option name completion, it() inline expansion of variables, history commands. ) it() Globbing --- extremely powerful, including: itemize( it() recursive globbing (cf. find), it() file attribute qualifiers (size, type, etc. also cf. find), it() full alternation and negation of patterns. ) it() Handling of multiple redirections (simpler than tee). it() Large number of options for tailoring. it() Path expansion (=foo -> /usr/bin/foo). it() Adaptable messages for spelling, watch, time as well as prompt (including conditional expressions). it() Named directories. it() Comprehensive integer arithmetic. it() Manipulation of arrays (including reverse subscripting). it() Spelling correction. ) sect(On what machines will it run?) From version 3.0, zsh uses GNU autoconf as the installation mechanism. This considerably increases flexibility over the old `buildzsh' mechanism. Consequently, zsh should compile and run on any modern version of UNIX, and a great many not-so-modern versions too. The file Etc/MACHINES in the distribution has more details. There are also now separate ports for Windows and OS/2, see `Where do I get it' below. If you need to change something to support a new machine, it would be appreciated if you could add any necessary preprocessor code and alter configure.in and acconfig.h to configure zsh automatically, then send the required context diffs to the list (see question link(5.2)(52)). Please make sure you have the latest version first. To get it to work, retrieve the source distribution (see question link(1.6)(16)), un-gzip it, un-tar it and read the INSTALL file in the top directory. Also read the Etc/MACHINES file for up-to-date information on compilation on certain architectures. mybf(Note for users of nawk) (The following information comes from Zoltan Hidvegi): On some systems nawk is broken and produces an incorrect signames.h file. This makes the signals code unusable. This often happens on Ultrix, HP-UX, IRIX (?). Install gawk if you experience such problems. sect(What's the latest version?) Zsh 3.0.6 is the latest production version. The new major number 3.0 largely reflects the considerable internal changes in zsh to make it more reliable, consistent and (where possible) compatible. Those planning on upgrading their zsh installation should take a look at the list of incompatibilities at the end of link(5.1)(51). This is longer than usual due to enhanced sh, ksh and POSIX compatibility. The beta version 3.1.6 is also available. Development of zsh is usually patch by patch, with each intermediate version publicly available. Note that this `open' development system does mean bugs are sometimes introduced into the most recent archived version. These are usually fixed quickly. Note also that as the shell changes, it may become incompatible with older versions; see the end of question link(5.1)(51) for a partial list. Changes of this kind are almost always forced by an awkward or unnecessary feature in the original design (as perceived by current users), or to enhance compatibility with other Bourne shell derivatives, or (most recently) to provide POSIX compliancy. sect(Where do I get it?) label(16) The coordinator of development is currently me; the alias email(coordinator@zsh.org) can be used to contact whoever is in the hot seat. The following are known mirrors (kept frequently up to date); the first is the official archive site, currently in Australia. All are available by anonymous FTP. The major sites keep test versions in the `testing' subdirectory: such up-to-the-minute development versions should only be retrieved if you actually plan to help test the latest version of the shell. The following list also appears on the WWW at url(http://www.zsh.org)(http://www.zsh.org) . description( mydit(Home site) url(ftp://ftp.zsh.org)(ftp://ftp.zsh.org) mydit() url(http://www.zsh.org/pub/zsh/) (http://www.zsh.org/pub/zsh/) mydit(Australia) url(ftp://ftp.ips.gov.au/mirror/zsh/) (ftp://ftp.ips.gov.au/mirror/zsh/) mydit(Denmark) url(ftp://sunsite.auc.dk/pub/unix/shells/zsh) (ftp://sunsite.auc.dk/pub/unix/shells/zsh) mydit(Finland) url(ftp://ftp.funet.fi/pub/unix/shells/zsh/) (ftp://ftp.funet.fi/pub/unix/shells/zsh/) mydit(France) url(ftp://ftp.cenatls.cena.dgac.fr/pub/shells/zsh/) (ftp://ftp.cenatls.cena.dgac.fr/pub/shells/zsh/) mydit(Germany) url(ftp://ftp.fu-berlin.de/pub/unix/shells/zsh/) (ftp://ftp.fu-berlin.de/pub/unix/shells/zsh/) mydit() url(ftp://ftp.gmd.de/packages/zsh/) (ftp://ftp.gmd.de/packages/zsh/) mydit() url(ftp://ftp.uni-trier.de/pub/unix/shell/zsh/) (ftp://ftp.uni-trier.de/pub/unix/shell/zsh/) mydit(Hungary) url(ftp://ftp.cs.elte.hu/pub/zsh/) (ftp://ftp.cs.elte.hu/pub/zsh/) mydit() (also url(http://www.cs.elte.hu/pub/zsh/) (http://www.cs.elte.hu/pub/zsh/) ) mydit() url(ftp://ftp.kfki.hu/pub/packages/zsh/) (ftp://ftp.kfki.hu/pub/packages/zsh/) mydit(Israel) \ url(ftp://ftp.math.technion.ac.il/mirror/ftp.zsh.org/pub/zsh/) (ftp://ftp.math.technion.ac.il/mirror/ftp.zsh.org/pub/zsh/) mydit() \ url(http://www.math.technion.ac.il/mirror/ftp.zsh.org/pub/zsh/) (http://www.math.technion.ac.il/mirror/ftp.zsh.org/pub/zsh/) mydit(Italy) url(ftp://ftp.unina.it/pub/Unix/pkgs/shell/zsh/) (ftp://ftp.unina.it/pub/Unix/pkgs/shell/zsh/) mydit(Japan) url(ftp://ftp.nisiq.net/pub/shells/zsh/) (ftp://ftp.nis.co.jp/pub/shells/zsh/) mydit() url(ftp://ftp.win.ne.jp/pub/shell/zsh/) (ftp://ftp.win.ne.jp/pub/shell/zsh/) mydit(Norway) url(ftp://ftp.uit.no/pub/unix/shells/zsh/) (ftp://ftp.uit.no/pub/unix/shells/zsh/) mydit(Poland) url(ftp://sunsite.icm.edu.pl/pub/unix/shells/zsh/) (ftp://sunsite.icm.edu.pl/pub/unix/shells/zsh/) mydit(Romania) url(ftp://ftp.roedu.net/pub/mirrors/ftp.zsh.org/pub/zsh/) (ftp://ftp.roedu.net/pub/mirrors/ftp.zsh.org/pub/zsh/) mydit() url(ftp://ftp.kappa.ro/pub/mirrors/ftp.zsh.org/pub/zsh/) (ftp://ftp.kappa.ro/pub/mirrors/ftp.zsh.org/pub/zsh/) mydit(Slovenia) url(ftp://ftp.siol.net/mirrors/zsh/) (ftp://ftp.siol.net/mirrors/zsh/) mydit(Sweden) url(ftp://ftp.lysator.liu.se/pub/unix/zsh/) (ftp://ftp.lysator.liu.se/pub/unix/zsh/) mydit(UK) url(ftp://ftp.net.lut.ac.uk/zsh/) (ftp://ftp.net.lut.ac.uk/zsh/) mydit() (also by FSP at port 21) mydit() url(ftp://sunsite.org.uk/packages/zsh/) (ftp://sunsite.org.uk/packages/zsh/) mydit(USA) url(ftp://uiarchive.uiuc.edu/pub/packages/shells/zsh/) (ftp://uiarchive.uiuc.edu/pub/packages/shells/zsh/) mydit() url(ftp://ftp.rge.com/pub/shells/zsh/) (ftp://ftp.rge.com/pub/shells/zsh/) mydit() url(ftp://foad.org/pub/zsh/) (ftp://foad.org/pub/zsh/) mydit() url(http://foad.org/zsh/) (http://foad.org/zsh/) ) The Windows port mentioned above is maintained separately by email(Amol Deshpande ); please mail Amol directly about any Windows-specific problems. This is quite new, so don't expect it to be perfect. You can get it from: description( mydit() url(ftp://ftp.blarg.net/users/amol/zsh) (ftp://ftp.blarg.net/users/amol/zsh) ) Likewise the OS/2 port is available from email(TAMURA Kent ) at description( mydit() url(http://cgi.din.or.jp/~tkent/tmp/zsh-3.0.0-os2-a01.zip) (http://cgi.din.or.jp/~tkent/tmp/zsh-3.0.0-os2-a01.zip) ) Starting from mid-October 1997, there is an archive of patches sent to the maintainers' mailing list. Note that these may not all be added to the shell, and some may already have been; you simply have to search for something you might want which is not in the version you have. Also, there may be some prerequisites earlier in the archive. It can be found on the zsh WWW pages (as described in link(1.1)(11)) at: description( mydit() url(http://sunsite.auc.dk/zsh/Patches/) (http://sunsite.auc.dk/zsh/Patches/) ) sect(I don't have root access: how do I make zsh my login shell?) Unfortunately, on many machines you can't use mytt(chsh) to change your shell unless the name of the shell is contained in /etc/shells, so if you have your own copy of zsh you need some sleight-of-hand to use it when you log on. (Simply typing mytt(zsh) is not really a solution since you still have your original login shell waiting for when you exit.) The basic idea is to use mytt(exec ) to replace the current shell with zsh. Often you can do this in a login file such as .profile (if your shell is sh or ksh) or .login (if it's csh). Make sure you have some way of altering the file (e.g. via FTP) before you try this as mytt(exec) is often rather unforgiving. If you have zsh in a subdirectory mytt(bin) of your home directory, put this in .profile: verb( [ -f $HOME/bin/zsh ] && exec $HOME/bin/zsh -l ) or if your login shell is csh or tcsh, put this in .login: verb( if ( -f ~/bin/zsh ) exec ~/bin/zsh -l ) (in each case the mytt(-l) tells zsh it is a login shell). If you want to check this works before committing yourself to it, you can make the login shell ask whether to exec zsh. The following work for Bourne-like shells: verb( [ -f $HOME/bin/zsh ] && { echo "Type Y to run zsh: \c" read line [ "$line" = Y ] && exec $HOME/bin/zsh -l } ) and for C-shell-like shells: verb( if ( -f ~/bin/zsh ) then echo -n "Type Y to run zsh: " if ( "$<" == Y ) exec ~/bin/zsh -l endif ) It's not a good idea to put this (even without the -l) into .cshrc, at least without some tests on what the csh is supposed to be doing, as that will cause _every_ instance of csh to turn into a zsh and will cause csh scripts (yes, unfortunately some people write these) which do not call `csh -f' to fail. If you want to tell xterm to run zsh, change the SHELL environment variable to the full path of zsh at the same time as you exec zsh (in fact, this is sensible for consistency even if you aren't using xterm). If you have to exec zsh from your .cshrc, a minimum safety check is mytt(if ($?prompt) exec zsh). If you like your login shell to appear in the process list as mytt(-zsh), you can link mytt(zsh) to mytt(-zsh) (e.g. by mytt(ln -s ~/bin/zsh ~/bin/-zsh)) and change the exec to mytt(exec -zsh). (Make sure mytt(-zsh) is in your path.) This has the same effect as the mytt(-l) option. Footnote: if you DO have root access, make sure zsh goes in /etc/shells on all appropriate machines, including NIS clients, or you may have problems with FTP to that machine. chapter(How does zsh differ from...?) As has already been mentioned, zsh is most similar to ksh, while many of the additions are to please csh users. Here are some more detailed notes. See also the article `UNIX shell differences and how to change your shell' posted frequently to the USENET group comp.unix.shell. sect(Differences from sh and ksh) label(21) Most features of ksh (and hence also of sh) are implemented in zsh; problems can arise because the implementation is slightly different. Note also that not all ksh's are the same either. I have based this on the 11/16/88f version of ksh; differences from ksh93 will be more substantial. As a summary of the status: enumerate( myeit() because of all the options it is not safe to assume a general zsh run by a user will behave as if sh or ksh compatible; myeit() invoking zsh as sh or ksh (or if either is a symbolic link to zsh) sets appropriate options and improves compatibility (from within zsh itself, calling mytt(ARGV0=sh zsh) will also work); myeit() from version 3.0 onward the degree of compatibility with sh under these circumstances is very high: zsh can now be used with GNU configure or perl's Configure, for example; myeit() the degree of compatibility with ksh is also high, but a few things are missing: for example the more sophisticated pattern-matching expressions are different for versions before 3.1.3 --- see the detailed list below; myeit() also from 3.0, the command `emulate' is available: `emulate ksh' and `emulate sh' set various options as well as changing the effect of single-letter option flags as if the shell had been invoked with the appropriate name. Including the commands `emulate sh; setopt localoptions' in a shell function will turn on sh emulation for that function only. ) The classic difference is word splitting, discussed in link(3.1)(31); this catches out very many beginning zsh users. As explained there, this is actually a bug in every other shell. The answer is to set tt(SH_WORD_SPLIT) for backward compatibility. The next most classic difference is that unmatched glob patterns cause the command to abort; set tt(NO_NOMATCH) for those. Here is a list of various options which will increase ksh compatibility, though maybe decrease zsh's abilities: see the manual entries for tt(GLOB_SUBST), tt(IGNORE_BRACES) (though brace expansion occurs in some versions of ksh), tt(KSH_ARRAYS), tt(KSH_GLOB), tt(KSH_OPTION_PRINT), tt(LOCAL_OPTIONS), tt(NO_BAD_PATTERN), tt(NO_BANG_HIST), tt(NO_EQUALS), \ tt(NO_HUP,) tt(NO_NOMATCH), tt(NO_RCS), tt(NO_SHORT_LOOPS), tt(PROMPT_SUBST), \ tt(RM_STAR_SILENT), tt(POSIX_BUILTINS), tt(SH_FILE_EXPANSION), tt(SH_GLOB), \ tt(SH_OPTION_LETTERS), tt(SH_WORD_SPLIT) (see question link(3.1)(31)) and tt(SINGLE_LINE_ZLE). Note that you can also disable any built-in commands which get in your way. If invoked as `ksh', the shell will try and set suitable options. Here are some differences from ksh which might prove significant for ksh programmers, some of which may be interpreted as bugs; there must be more. Note that this list is deliberately rather full and that most of the items are fairly minor. Those marked `*' perform in a ksh-like manner if the shell is invoked with the name `ksh', or if `emulate ksh' is in effect. Capitalised words with underlines refer to shell options. itemize( it() Syntax: itemize( it()* Shell word splitting: see question link(3.1)(31). it()* Arrays are (by default) more csh-like than ksh-like: subscripts start at 1, not 0; tt(array[0]) refers to tt(array[1]); mytt($array) refers to the whole array, not tt($array[0]); braces are unnecessary: tt($a[1] == ${a[1]}), etc. The tt(KSH_ARRAYS) option is now available. it() Coprocesses are established by mytt(coproc); mytt(|&) behaves like csh. Handling of coprocess file descriptors is also different. it() In mytt(cmd1 && cmd2 &), only mytt(cmd2) instead of the whole expression is run in the background in zsh. The manual implies this is a bug. Use mytt({ cmd1 && cmd2 } &) as a workaround. ) it() Command line substitutions, globbing etc.: itemize( it()* Failure to match a globbing pattern causes an error (use tt(NO_NOMATCH)). it()* The results of parameter substitutions are treated as plain text: mytt(foo="*"; print $foo) prints all files in ksh but mytt(*) in zsh (uset tt(GLOB_SUBST)). it()* tt($PSn) do not do parameter substitution by default (use \ PROMPT_SUBST). it()* Standard globbing does not allow ksh-style `pattern-lists'. Equivalents: verb( ---------------------------------------------------------------------- ksh zsh Meaning ----- ----- --------- !(foo) ^foo Anything but foo. or foo1~foo2 Anything matching foo1 but foo2[1]. @(foo1|foo2|...) (foo1|foo2|...) One of foo1 or foo2 or ... ?(foo) (foo|) Zero or one occurrences of foo. *(foo) (foo)# Zero or more occurrences of foo. +(foo) (foo)## One or more occurrences of foo. ---------------------------------------------------------------------- ) The mytt(^), mytt(~) and mytt(#) (but not mytt(|))forms require \ tt(EXTENDED_GLOB). From version 3.1.3, the ksh forms are fully supported when the option tt(KSH_GLOB) is in effect; for previous versions you must use the table above. [1] Note that mytt(~) is the only globbing operator to have a lower precedence than mytt(/). For example, mytt(**/foo~*bar*) matches any file in a subdirectory called mytt(foo), except where mytt(bar) occurred somewhere in the path (e.g. mytt(users/barstaff/foo) will be excluded by the mytt(~) operator). As the mytt(**) operator cannot be grouped (inside parentheses it is treated as mytt(*)), this is the way to exclude some subdirectories from matching a mytt(**). it() Unquoted assignments do file expansion after mytt(:)s (intended for PATHs). it() mytt(integer) does not allow mytt(-i). it() mytt(typeset) and mytt(integer) have special behaviour for assignments in ksh, but not in zsh. For example, this doesn't work in zsh: verb( integer k=$(wc -l ~/.zshrc) ) because the return value from tt(wc) includes leading whitespace which causes wordsplitting. Ksh handles the assignment specially as a single word. ) it() Command execution: itemize( it()* There is no tt($ENV) variable (use tt(/etc/zshrc), tt(~/.zshrc); note also tt($ZDOTDIR)). it() tt($PATH) is not searched for commands specified at invocation without -c. ) it() Aliases and functions: itemize( it() The order in which aliases and functions are defined is significant: function definitions with () expand aliases -- see question \ link(2.3)(23). it() Aliases and functions cannot be exported. it() There are no tracked aliases: command hashing replaces these. it() The use of aliases for key bindings is replaced by `bindkey'. it()* Options are not local to functions (use LOCAL_OPTIONS; note this may always be unset locally to propagate options settings from a function to the calling level). ) it() Traps and signals: itemize( it()* Traps are not local to functions. The option LOCAL_TRAPS is available from 3.1.6. it() TRAPERR has become TRAPZERR (this was forced by UNICOS which has SIGERR). ) it() Editing: itemize( it() The options tt(emacs), tt(gmacs), tt(viraw) are not supported. Use bindkey to change the editing behaviour: mytt(set -o {emacs,vi}) becomes mytt(bindkey -{e,v}); for gmacs, go to emacs mode and use mytt(bindkey \^t gosmacs-transpose-characters). it() The mytt(keyword) option does not exist and mytt(-k) is instead interactivecomments. (mytt(keyword) will not be in the next ksh release either.) it() Management of histories in multiple shells is different: the history list is not saved and restored after each command. The option tt(SHARE_HISTORY) appeared in 3.1.6 and is set in ksh compatibility mode to remedy this. it() mytt(\) does not escape editing chars (use mytt(^V)). it() Not all ksh bindings are set (e.g. mytt(#); try mytt(q)). it()* mytt(#) in an interactive shell is not treated as a comment by default. ) it() Built-in commands: itemize( it() Some built-ins (tt(r), tt(autoload), tt(history), tt(integer) ...) were aliases in ksh. it() There is no built-in command newgrp: use e.g. mytt(alias newgrp="exec newgrp") it() mytt(jobs) has no mytt(-n) flag. it() mytt(read) has no mytt(-s) flag. ) it() Other idiosyncrasies: itemize( it() mytt(select) always redisplays the list of selections on each loop. ) ) sect(Similarities with csh) Although certain features aim to ease the withdrawal symptoms of csh (ab)users, the syntax is in general rather different and you should certainly not try to run scripts without modification. The c2z script is provided with the source (in Misc/c2z) to help convert .cshrc and .login files; see also the next question concerning aliases, particularly those with arguments. Csh-compatibility additions include: itemize( it() tt(logout), tt(rehash), tt(source), tt((un)limit) built-in commands. it() tt(*rc) file for interactive shells. it() Directory stacks. it() tt(cshjunkie*), tt(ignoreeof) options. it() The tt(CSH_NULL_GLOB) option. it() tt(>&), tt(|&) etc. redirection. (Note that mytt(>file 2>&1) is the standard Bourne shell command for csh's mytt(>&file).) it() tt(foreach ...) loops; alternative syntax for other loops. it() Alternative syntax mytt(if ( ... ) ...), though this still doesn't work like csh: it expects a command in the parentheses. Also mytt(for), mytt(which). it() tt($PROMPT) as well as tt($PS1), tt($status) as well as tt($?), tt($#argv) as well as tt($#), .... it() Escape sequences via tt(%) for prompts. it() Special array variables tt($PATH) etc. are colon-separated, tt($path) are arrays. it() tt(!)-type history (which may be turned off via mytt(setopt nobanghist)). it() Arrays have csh-like features (see under link(2.1)(21)). ) sect(Why do my csh aliases not work? (Plus other alias pitfalls.)) label(23) First of all, check you are using the syntax verb( alias newcmd='list of commands' ) and not verb( alias newcmd 'list of commands' ) which won't work. (It tells you if `newcmd' and `list of commands' are already defined as aliases.) Otherwise, your aliases probably contain references to the command line of the form mytt(\!*), etc. Zsh does not handle this behaviour as it has shell functions which provide a way of solving this problem more consistent with other forms of argument handling. For example, the csh alias verb( alias cd 'cd \!*; echo $cwd' ) can be replaced by the zsh function, verb( cd() { builtin cd "$@"; echo $PWD; } ) (the `builtin' tells zsh to use its own `cd', avoiding an infinite loop) or, perhaps better, verb( cd() { builtin cd "$@"; print -D $PWD; } ) (which converts your home directory to a tt(~)). In fact, this problem is better solved by defining the special function chpwd() (see the manual). Note also that the mytt(;) at the end of the function is optional in zsh, but not in ksh or sh (for sh's where it exists). Here is Bart Schaefer's guide to converting csh aliases for zsh. enumerate( myeit() If the csh alias references "parameters" (tt(\!:1), tt(\!*) etc.), then in zsh you need a function (referencing tt($1), tt($*) etc.). Otherwise, you can use a zsh alias. myeit() If you use a zsh function, you need to refer _at_least_ to tt($*) in the body (inside the tt({ })). Parameters don't magically appear inside the tt({ }) the way they get appended to an alias. myeit() If the csh alias references its own name (tt(alias rm "rm -i")), then in a zsh function you need the "command" keyword (function tt(rm() { command rm -i "$@" })), but in a zsh alias you don't (tt(alias rm="rm -i")). myeit() If you have aliases that refer to each other (tt(alias ls "ls -C"; alias lf "ls -F" ==> lf == ls -C -F)) then you must either: itemize( it() convert all of them to zsh functions; or it() after converting, be sure your .zshrc defines all of your aliases before it defines any of your functions. ) Those first four are all you really need, but here are four more for heavy csh alias junkies: myeit() Mapping from csh alias "parameter referencing" into zsh function (assuming tt(SH_WORD_SPLIT) and tt(KSH_ARRAYS) are NOT set in zsh): verb( csh zsh ===== ========== \!* $* (or $argv) \!^ $1 (or $argv[1]) \!:1 $1 \!:2 $2 (or $argv[2], etc.) \!$ $*[$#] (or $argv[$#], or $*[-1]) \!:1-4 $*[1,4] \!:1- $*[1,$#-1] (or $*[1,-2]) \!^- $*[1,$#-1] \!*:q "$@" \!*:x $=* ($*:x doesn't work (yet)) ) myeit() Remember that it is NOT a syntax error in a zsh function to refer to a position (tt($1), tt($2), etc.) greater than the number of parameters. (E.g., in a csh alias, a reference to tt(\!:5) will cause an error if 4 or fewer arguments are given; in a zsh function, tt($5) is the empty string if there are 4 or fewer parameters.) myeit() To begin a zsh alias with a - (dash, hyphen) character, use mytt(alias --): verb( csh zsh =============== ================== alias - "fg %-" alias -- -="fg %-" ) myeit() Stay away from mytt(alias -g) in zsh until you REALLY know what you're doing. ) There is one other serious problem with aliases: consider verb( alias l='/bin/ls -F' l() { /bin/ls -la "$@" | more } ) mytt(l) in the function definition is in command position and is expanded as an alias, defining mytt(/bin/ls) and mytt(-F) as functions which call mytt(/bin/ls), which gets a bit recursive. This can be avoided if you use mytt(function) to define a function, which doesn't expand aliases. It is possible to argue for extra warnings somewhere in this mess. Luckily, it is not possible to define mytt(function) as an alias. Bart Schaefer's rule is: Define first those aliases you expect to use in the body of a function, but define the function first if the alias has the same name as the function. sect(Similarities with tcsh) (The sections on csh apply too, of course.) Certain features have been borrowed from tcsh, including tt($watch), tt(run-help), tt($savehist), tt($histlit), periodic commands etc., extended prompts, tt(sched) and tt(which) built-ins. Programmable completion was inspired by, but is entirely different to, tcsh's mytt(complete). (There is a perl script called tt(lete2ctl) in the Misc directory of the source distribution to convert mytt(complete) to mytt(compctl) statements.) This list is not definitive: some features have gone in the other direction. If you're missing the editor function tt(run-fg-editor), try something with mytt(bindkey -s) (which binds a string to a keystroke), e.g. verb( bindkey -s '^z' '\eqfg %$EDITOR:t\n' ) which pushes the current line onto the stack and tries to bring a job with the basename of your editor into the foreground. mytt(bindkey -s) allows limitless possibilities along these lines. You can execute any command in the middle of editing a line in the same way, corresponding to tcsh's mytt(-c) option: verb( bindkey -s '^p' '\eqpwd\n' ) In both these examples, the mytt(\eq) saves the current input line to be restored after the command runs; a better effect with multiline buffers is achieved if you also have verb( bindkey '\eq' push-input ) to save the entire buffer. In recent versions of zsh 3.1, you have the following more sophisticated option, verb( run-fg-editor() { zle push-input BUFFER="fg %$EDITOR:t" zle accept-line } zle -N run-fg-editor ) and can now bind tt(run-fg-editor) just like any other editor function. sect(Similarities with bash) The Bourne-Again Shell, bash, is another enhanced Bourne-like shell; the most obvious difference from zsh is that it does not attempt to emulate the Korn shell. Since both shells are under active development it is probably not sensible to be too specific here. Broadly, bash has paid more attention to standards compliancy (i.e. POSIX) for longer, and has so far avoided the more abstruse interactive features (programmable completion, etc.) that zsh has. sect(Shouldn't zsh be more/less like ksh/(t)csh?) People often ask why zsh has all these `unnecessary' csh-like features, or alternatively why zsh doesn't understand more csh syntax. This is far from a definitive answer and the debate will no doubt continue. Paul's object in writing zsh was to produce a ksh-like shell which would have features familiar to csh users. For a long time, csh was the preferred interactive shell and there is a strong resistance to changing to something unfamiliar, hence the additional syntax and tt(CSH_JUNKIE) options. This argument still holds. On the other hand, the arguments for having what is close to a plug-in replacement for ksh are, if anything, even more powerful: the deficiencies of csh as a programming language are well known (look in any Usenet FAQ archive, e.g. url(http://www.cis.ohio-state.edu/hypertext/faq/usenet/unix-faq/\ shell/csh-whynot/faq.html) (http://www.cis.ohio-state.edu/hypertext/faq/usenet/unix-faq/shell/csh-whynot/faq.html) if you are in any doubt) and zsh is able to run many standard scripts such as /etc/rc. Of course, this makes zsh rather large and feature-ridden so that it seems to appeal mainly to hackers. The only answer, perhaps not entirely satisfactory, is that you have to ignore the bits you don't want. The introduction of loadable in modules in version 3.1 should help. chapter(How to get various things to work) sect(Why does mytt($var) where mytt(var="foo bar") not do what I expect?) label(31) In most Bourne-shell derivatives, multiple-word variables such as verb( var="foo bar" ) are split into words when passed to a command or used in a mytt(for foo in $var) loop. By default, zsh does not have that behaviour: the variable remains intact. (This is not a bug! See below.) The option tt(SH_WORD_SPLIT) exists to provide compatibility. For example, defining the function args to show the number of its arguments: verb( args() { echo $#; } ) and with our definition of `var', verb( args $var ) produces the output `1'. After verb( setopt shwordsplit ) the same function produces the output `2', as with sh and ksh. Unless you need strict sh/ksh compatibility, you should ask yourself whether you really want this behaviour, as it can produce unexpected effects for variables with entirely innocuous embedded spaces. This can cause horrendous quoting problems when invoking scripts from other shells. The natural way to produce word-splitting behaviour in zsh is via arrays. For example, verb( set -A array one two three twenty ) (or verb( array=(one two three twenty) ) if you prefer), followed by verb( args $array ) produces the output `4', regardless of the setting of tt(SH_WORD_SPLIT). Arrays are also much more versatile than single strings. Probably if this mechanism had always been available there would never have been automatic word splitting in scalars, which is a sort of uncontrollable poor man's array. Note that this happens regardless of the value of the internal field separator, tt($IFS); in other words, with mytt(IFS=:; foo=a:b; args $foo) you get the answer 1. Other ways of causing word splitting include a judicious use of `eval': verb( sentence="Longtemps, je me suis couch\\'e de bonne heure." eval "words=($sentence)" ) after which $words is an array with the words of $sentence (note characters special to the shell, such as the mytt(') in this example, must already be quoted), or, less standard but more reliable, turning on tt(SH_WORD_SPLIT) for one variable only: verb( args ${=sentence} ) always returns 8 with the above definition of mytt(args). (In older versions of zsh, tt(${=foo}) toggled tt(SH_WORD_SPLIT); now it forces it on.) Note also the tt("$@") method of word splitting is always available in zsh functions and scripts (though strictly this does array splitting, not word splitting). This is more portable than the tt($*), since it will work regardless of the tt(SH_WORD_SPLIT) setting; the other difference is that tt($*) removes empty arguments from the array. You can fix the first half of that objection by using tt(${==*}), which turns off tt(SH_WORD_SPLIT) for the duration of the expansion. tt(SH_WORD_SPLIT) is set when zsh is invoked with the names `ksh' or `sh', or (entirely equivalent) when mytt(emulate ksh) or mytt(emulate sh) is in effect. sect(In which startup file do I put...?) When zsh starts up, there are four files you can change which it will run under various circumstances: tt(.zshenv), tt(.zprofile), tt(.zshrc) and tt(.zlogin). They are usually in your home directory, but the variable tt($ZDOTDIR) may be set to alter that. Here are a few simple hints about how to use them. There are also files which the system administrator can set for all shells; you can avoid running all except tt(/etc/zshenv) by starting zsh with the tt(-f) option --- for this reason it is important for administrators to make sure tt(/etc/zshenv) is as brief as possible. The order in which the four files are searched (none of them myem(need) to exist) is the one just given. However, tt(.zprofile) and tt(.zlogin) are only run when the shell is a login shell --- when you first login, of course, and whenever you start zsh with the tt(-l) option. All login shells are interactive. The order is the only difference between those; you should decide whether you need things set before or after tt(.zshrc). These files are a good place to set environment variables (i.e. mytt(export) commands), since they are passed on to all shells without you having to set them again, and also to check that your terminal is set up properly (except that if you want to change settings for terminal emulator windows like tt(xterm) you will need to put those in tt(.zshrc), since usually you do not get a login shell here). The only file you can alter which is started with every zsh (unless you use the tt(-f) option) is tt(.zshenv), so this is a good place to \ put things you want even if the shell is non-interactive: options for changing the the syntax, like tt(EXTENDED_GLOB), any changes to set with mytt(limit), any more variables you want to make sure are set as for example tt($fpath) to find functions. You almost certainly do not want tt(.zshenv) to produce any output. Some people prefer not to use tt(.zshenv) for setting options, as this affects scripts; but making zsh scripts portable usually requires special handling anyway. Finally, tt(.zshrc) is run for every interactive shell; that includes login shells, but also any other time you start up a shell, such as simply by typing mytt(zsh) or opening a new terminal emulator window. This file is the place to change the editing behaviour via options or mytt(bindkey), control how your history is saved, set aliases unless you want to use them in scripts too, and for any other clutter which can't be exported but you only use when interacting directly with the shell. You probably don't want tt(.zshrc) to produce output, either, since there are occasions when this can be a problem, such as when using mytt(rsh) from another host. See link(3.21)(321) for what to \ put in tt(.zshrc) to save your history. sect(What is the difference between `export' and the tt(ALL_EXPORT) option?) Normally, you would put a variable into the environment by using mytt(export var). The command mytt(setopt allexport) causes all variables which are subsequently set (N.B. not all the ones which already exist) to be put into the environment. This may seem a useful shorthand, but in practice it can have unhelpful side effects: enumerate( myeit() Since every variable is in the environment as well as remembered by the shell, the memory for it needs to be allocated twice. This is bigger as well as slower. myeit() It really is mybf(every) variable which is exported, even loop variables in mytt(for) loops. This is probably a waste. myeit() An arbitrary variable created by the user might have a special meaning to a command. Since all shell variables are visible to commands, there is no protection against this. ) For these reasons it is usually best to avoid tt(ALL_EXPORT) unless you have a specific use for it. One safe use is to set it before creating a list of variables in an initialisation file, then unset it immediately afterwards. Only those variables will be automatically exported. sect(How do I turn off spelling correction/globbing for a single command?) In the first case, you presumably have mytt(setopt correctall) in an initialisation file, so that zsh checks the spelling of each word in the command line. You probably do not want this behaviour for commands which do not operate on existing files. The answer is to alias the offending command to itself with mytt(nocorrect) stuck on the front, e.g. verb( alias mkdir='nocorrect mkdir' ) To turn off globbing, the rationale is identical: verb( alias mkdir='noglob mkdir' ) You can have both tt(nocorrect) and tt(noglob), if you like, but the tt(nocorrect) must come first, since it is needed by the line editor, while tt(noglob) is only handled when the command is examined. Note also that a shell function won't work: the no... directives must be expanded before the rest of the command line is parsed. sect(How do I get the meta key to work on my xterm?) label(35) As stated in the manual, zsh needs to be told about the meta key by using mytt(bindkey -me) or mytt(bindkey -mv) in your .zshrc or on the command line. You probably also need to tell the terminal driver to allow the `meta' bit of the character through; mytt(stty pass8) is the usual incantation. Sample .zshrc entry: verb( [[ $TERM = "xterm" ]] && stty pass8 && bindkey -me ) or, on SYSVR4-ish systems without pass8, verb( [[ $TERM = "xterm" ]] && stty -parenb -istrip cs8 && bindkey -me ) (disable parity detection, don't strip high bit, use 8-bit characters). Make sure this comes myem(before) any bindkey entries in your .zshrc which redefine keys normally defined in the emacs/vi keymap. You don't need the mytt(bindkey) to be able to define your own sequences with the meta key, though you still need the mytt(stty). sect(How do I automatically display the directory in my xterm title bar?) You should use the special function mytt(chpwd), which is called when the directory changes. The following checks that standard output is a terminal, then puts the directory in the title bar if the terminal is compatible with tt(xterm) or is a tt(sun-cmd). verb( chpwd() { [[ -t 1 ]] || return case $TERM in sun-cmd+CHAR(41) print -Pn "\e]l%~\e\\" ;; *xterm*|rxvt|dtterm|Eterm+CHAR(41) print -Pn "\e]2;%~\a" ;; esac } ) Change mytt(%~) if you want the message to be different. (The mytt(-P) option interprets such sequences just like in prompts, in this case producing the current directory; you can of course use mytt($PWD) here, but that won't use the mytt(~) notation which I find clearer.) Note that when the tt(xterm) starts up you will probably want to call tt(chpwd) directly: just put mytt(chpwd) in tt(.zshrc) after it is defined or \ autoloaded. sect(How do I make the completion list use eight bit characters?) If you are sure your terminal handles this, the easiest way from versions 3.0.6 and 3.1 of the shell is to set the option tt(PRINT_EIGHT_BIT). In principle, this will work automatically if your computer uses the `locale' system and your locale variables are set properly, as zsh understands this. However, it is quite complicated, so if it isn't already set up, trying the option is a lot easier. For earlier versions of zsh 3, you are stuck with trying to understand locales, see the tt(setlocale(3)) and tt(zshparam(1)) manual pages: the simplest possibility may be to set tt(LC_ALL=en_US). For older versions of the shell, there is no easy way out. sect(Why do the cursor (arrow) keys not work?) The cursor keys send different codes depending on the terminal; zsh only binds the most well known versions. If you see these problems, try putting the following in your tt(.zshrc): verb( bindkey "$(echotc kl)" backward-char bindkey "$(echotc kr)" forward-char bindkey "$(echotc ku)" up-line-or-history bindkey "$(echotc kd)" down-line-or-history ) If you use vi mode, use mytt(vi-backward-char) and mytt(vi-forward-char) where appropriate. Note, however, that up to version 3.0 binding arbitrary multiple key sequences can cause problems, so check that this works with your set up first. Also, from version 3.1.3, more sequences are supported by default, namely those in the form mytt(O) followed by tt(A), tt(B), tt(C) or tt(D), as well as the corresponding set beginning mytt([), so this may be redundant. sect(Why does my terminal act funny in some way?) If you are using an OpenWindows cmdtool as your terminal, any escape sequences (such as those produced by cursor keys) will be swallowed up and never reach zsh. Either use shelltool or avoid commands with escape sequences. You can also disable scrolling from the cmdtool pane menu (which effectively turns it into a shelltool). If you still want scrolling, try using an xterm with the scrollbar activated. If that's not the problem, and you are using stty to change some tty settings, make sure you haven't asked zsh to freeze the tty settings: type verb( ttyctl -u ) before any stty commands you use. On the other hand, if you aren't using stty and have problems you may need the opposite: mytt(ttyctl -f) freezes the terminal to protect it from hiccups introduced by other programmes (kermit has been known to do this). A problem I have experienced myself (on an AIX 3.2 workstation with xterm) is that termcap deinitialization sequences sent by `less' were causing automargins to be turned off --- not actually a shell problem, but you might have thought it was. The fix is to put `tt(X)' into the environment variable tt(LESS) to stop the sequences being sent. Other programs (though not zsh) may also send that sequence. If myem(that)'s not the problem, and you are having difficulties with external commands (not part of zsh), and you think some terminal setting is wrong (e.g. tt(^V) is getting interpreted as `literal next character' when you don't want it to be), try verb( ttyctl -u STTY='lnext "^-"' commandname ) (in this example), or just export STTY for all commands to see. Note that zsh doesn't reset the terminal completely afterwards: just the modes it uses itself and a number of special processing characters (see the tt(stty(1)) manual page). sect(Why does zsh not work in an Emacs shell mode any more?) (This information comes from Bart Schaefer and other zsh-workers.) Emacs 19.29 or thereabouts stopped using a terminal type of "emacs" in shell buffers, and instead sets it to "dumb". Zsh only kicks in its special I'm-inside-emacs initialization when the terminal type is "emacs". Probably the most reliable way of dealing with this is to look for the environment variable mytt($EMACS), which is set to mytt(t) in Emacs' shell mode. Putting verb( [[ $EMACS = t ]] && unsetopt zle ) in your .zshrc should be sufficient. Another method is to put verb( #!/bin/sh TERM=emacs exec zsh ) into a file ~/bin/eshell, then mytt(chmod +x ~/bin/eshell), and tell emacs to use that as the shell by adding verb( (setenv "ESHELL" "~/bin/eshell") ) to ~/.emacs. sect(Why do my autoloaded functions not autoload [the first time]?) The problem is that there are two possible ways of autoloading a function (see the AUTOLOADING FUNCTIONS section of the zsh manual page zshmisc for more detailed information): enumerate( myeit() The file contains just the body of the function, i.e. there should be no line at the beginning saying mytt(function foo {) or mytt(foo () {), and consequently no matching mytt(}) at the end. This is the traditional zsh method. The advantage is that the file is called exactly like a script, so can double as both. To define a function mytt(xhead () { print -n "\033]2;$*\a"; }), the file would just contain mytt(print -n "\033]2;$*\a"). myeit() The file contains the entire definition, and maybe even other code: it is run when the function needs to be loaded, then the function itself is called up. This is the method in ksh. To define the same function mytt(xhead), the whole of the usual definition should be in the file. ) In old versions of zsh, before 3.0, only the first behaviour was allowed, so you had to make sure the file found for autoload just contained the function body. You could still define other functions in the file with the standard form for definitions, though they would be redefined each time you called the main function. In version 3.0.x, the second behaviour is activated if the file defines the autoloaded function. Unfortunately, this is incompatible with the old zsh behaviour which allowed you to redefine the function when you called it. From version 3.1, there is an option tt(KSH_AUTOLOAD) to allow full ksh compatiblity, i.e. the function myem(must) be in the second form above. If that is not set, zsh tries to guess which form you are using: if the file contains only a complete definition of the function in the second form, and nothing else apart from comments and whitespace, it will use the function defined in the file; otherwise, it will assume the old behaviour. The option is set if mytt(emulate ksh) is in effect, of course. (A neat trick to autoload all functions in a given directory is to include a line like mytt(autoload ~/fns/*(:t)) in .zshrc; the bit in parentheses removes the directory part of the filenames, leaving just the function names.) sect(How does base arithmetic work?) The ksh syntax is now understood, i.e. verb( let 'foo = 16#ff' ) or equivalently verb( (( foo = 16#ff )) ) or even verb( foo=$((16#ff)) ) The original syntax was verb( (( foo = [16]ff )) ) --- this was based on a misunderstanding of the ksh manual page. It still works but its use is deprecated. Then verb( echo $foo ) gives the answer `255'. It is possible to declare variables explicitly to be integers, via verb( typeset -i foo ) which has a different effect: namely the base used in the first assignment (hexadecimal in the example) is subsequently used whenever `foo' is displayed (although the internal representation is unchanged). To ensure foo is always displayed in decimal, declare it as verb( typeset -i 10 foo ) which requests base 10 for output. You can change the output base of an existing variable in this fashion. Using the mytt($(( ... ))) method will always display in decimal. sect(How do I get a newline in my prompt?) label(313) You can place a literal newline in quotes, i.e. verb( PROMPT="Hi Joe, what now?%# " ) If you have the bad taste to set the option cshjunkiequotes, which inhibits such behaviour, you will have to bracket this with mytt(unsetopt cshjunkiequotes) and mytt(setopt cshjunkiequotes), or put it in your tt(.zshrc) before the option is set. In all recent versions of zsh, there is a form of quoting which will interpret print sequences like `tt(\n)' but otherwise acts like single quotes: surround the string with tt($'...'). Hence: verb( PROMPT=$'Hi Joe,\nwhat now?%# ' ) is a neat way of doing what you want. Note that it is the quotes, not the prompt expansion, which turns the `tt(\n)' into a newline. sect(Why does mytt(bindkey ^a command-name) or mytt(stty intr ^-) do something funny?) You probably have the extendedglob option set in which case tt(^) and tt(#) are metacharacters. tt(^a) matches any file except one called tt(a), so the line is interpreted as bindkey followed by a list of files. Quote the tt(^) with a backslash or put quotation marks around tt(^a). sect(Why can't I bind tt(\C-s) and tt(\C-q) any more?) The control-s and control-q keys now do flow control by default, unless you have turned this off with mytt(stty -ixon) or redefined the keys which control it with mytt(stty start) or mytt(stty stop). (This is done by the system, not zsh; the shell simply respects these settings.) In other words, tt(\C-s) stops all output to the terminal, while tt(\C-q) resumes it. There is an option tt(NO_FLOW_CONTROL) to stop zsh from allowing flow control and hence restoring the use of the keys: put mytt(setopt noflowcontrol) in your tt(.zshrc) file. sect(How do I execute command mytt(foo) within function mytt(foo)?) The command mytt(command foo) does just that. You don't need this with aliases, but you do with functions. Note that error messages like verb( zsh: job table full or recursion limit exceeded ) are a good sign that you tried calling `foo' in function `foo' without using `command'. If mytt(foo) is a builtin rather than an external command, use mytt(builtin foo) instead. sect(Why do history substitutions with single bangs do something funny?) If you have a command like "tt(echo !-2:$ !$)", the first history substitution then sets a default to which later history substitutions with single unqualified bangs refer, so that !$ becomes equivalent to tt(!-2:$). The option tt(CSH_JUNKIE_HISTORY) makes all single bangs refer to the last command. sect(Why does zsh kill off all my background jobs when I logout?) Simple answer: you haven't asked it not to. Zsh (unlike [t]csh) gives you the option of having background jobs killed or not: the mytt(nohup) option exists if you don't want them killed. Note that you can always run programs with mytt(nohup) in front of the pipeline whether or not the option is set, which will prevent that job from being killed on logout. (mytt(nohup) is actually an external command.) The mytt(disown) builtin is very useful in this respect: if zsh informs you that you have background jobs when you try to logout, you can mytt(disown) all the ones you don't want killed when you exit. This is also a good way of making jobs you don't need the shell to know about (such as commands which create new windows) invisible to the shell. Likewise, you can start a background job with mytt(&!) instead of just mytt(&) at the end, which will automatically disown the job. sect(How do I list all my history entries?) Tell zsh to start from entry 1: mytt(history 1). Those entries at the start which are no longer in memory will be silently omitted. sect(How does the alternative loop syntax, e.g. mytt(while {...} {...}) \ work?) Zsh provides an alternative to the traditional sh-like forms with mytt(do), verb( while TEST; do COMMANDS; done ) allowing you to have the COMMANDS delimited with some other command structure, often mytt({...}). The rules are quite complicated and in most scripts it is probably safer --- and certainly more compatible --- to stick with the sh-like rules. If you are wondering, the following is a rough guide. To make it work you must make sure the TEST itself is clearly delimited. For example, this works: verb( while (( i++ < 10 )) { echo i is $i; } ) but this does myem(not): verb( while let "i++ < 10"; { echo i is $i; } # Wrong! ) The reason is that after mytt(while), any sort of command list is valid. This includes the whole list mytt(let "i++ < 10"; { echo i $i; }); the parser simply doesn't know when to stop. Furthermore, it is wrong to miss out the semicolon, as this makes the mytt({...}) part of the argument to mytt(let). A newline behaves the same as a semicolon, so you can't put the brace on the next line as in C. So when using this syntax, the test following the mytt(while) must be wrapped up: any of mytt(((...))), mytt([[...]]), mytt({...}) or mytt((...)) will have this effect. (They have their usual syntactic meanings too, of course; they are not interchangeable.) Note that here too it is wrong to put in the semicolon, as then the case becomes identical to the preceding one: verb( while (( i++ < 10 )); { echo i is $i; } # Wrong! ) The same is true of the mytt(if) and mytt(until) constructs: verb( if { true } { echo yes } else { echo no } ) but with mytt(for), which only needs a list of words, you can get away with it: verb( for foo in a b; { echo foo is $a; bar=$foo; } ) since the parser knows it only needs everything up to the first semicolon. For the same reason, there is no problem with the mytt(repeat), mytt(case) or mytt(select) constructs; in fact, mytt(repeat) doesn't even need the semicolon since it knows the repeat count is just one word. This is independent of the behaviour of the SHORTLOOPS option (see manual), which you are in any case encouraged even more strongly not to use in programs as it can be very confusing. sect(Why is my history not being saved?) label(321) In zsh, you need to set three variables to make sure your history is written out when the shell exits. For example, verb( HISTSIZE=200 HISTFILE=~/.zsh_history SAVEHIST=200 ) tt($HISTSIZE) tells the shell how many lines to keep internally, tt($HISTFILE) tells it where to write the history, and tt($SAVEHIST), the easiest one to forget, tells it how many to write out. The simplest possibility is to set it to the same as tt($HISTSIZE) as above. There are also various options affecting history; see the manual. sect(How do I get a variable's value to be evaluated as another variable?) The problem is that you have a variable tt($E) containing the string mytt(EDITOR), and a variable tt($EDITOR) containing the string mytt(emacs), or something such. How do you get from tt($E) to emacs in one easy stage? There is no standard single-stage way of doing this. However, there is a zsh idiom (available in all versions of zsh since 3.0) for this: verb( print ${(e)E:+\$$E} ) Ignore the mytt((e)) for now. The mytt(:+) means: if the variable tt($E) is set, substitute the following, i.e. mytt(\$$E). This is expanded to mytt($EDITOR) by the normal rules. Finally, the mytt((e)) \ means: evaluate the expression you just made. This gives mytt(emacs). For a standard shell way of doing this, you are stuck with mytt(eval): verb( eval echo \$$E ) produces the same result. Versions 3.1.6 of allows you to do this directly with a new flag; mytt(${(P)E}). As a slight aside, sometimes people note that the syntax mytt(${${E}}) is valid and expect it to have this effect. It probably ought to, but in the early days of zsh it was found convenient to have this way of producing different substitutions on the same parameter; for example, mytt(${${file##**/}%.*}) removes everything up to the last slash in mytt($file), then everything from the last dot on, inclusive (try it, this works). So in mytt(${${E}}), the internal mytt(${...}) actually does nothing. sect(How do I prevent the prompt overwriting output when there is no newline?) The problem is, for example, verb( % echo -n foo % ) and the tt(foo) has been overwritten by the prompt tt(%). The answer is simple: put tt(unsetopt promptcr) in your tt(.zshrc). The option \ tt(PROMPT_CR), to print a carriage return before a new prompt, is set by default because a prompt at the right hand side (mytt($RPROMPT), mytt($RPS1)) will not appear in the right place, and multi-line editing will be confused about the line position, unless the line starts in the left hand column. Apart from tt(PROMPT_CR), you can force this to happen by putting a newline in the prompt (see question link(3.13)(313) for that). sect(What's wrong with cut and paste on my xterm?) On the majority of modern UNIX systems, cutting text from one window and pasting it into another should work fine. On a few, however, there are problems due to issues about how the terminal is handled: most programs expect the terminal to be in `canonical input mode', which means that the program is passed a whole line of input at a time, while for editing the shell needs a single character at a time and must be in `non-canonical input mode'. On the systems in question, input can be lost or re-ordered when the mode changes. There are actually two slightly different problems: enumerate( myeit() When you paste something in while a programme is running, so that the shell only retrieves it later. Traditionally, there was a test which was used only on systems where the problem was known to exist, so it is possible some other systems were not handled (for example, certain versions of IRIX, it appears); also, continuation lines were not handled properly. A more reliable approach appears from versions 3.0.6 and 3.1.6. myeit() When the shell is waiting for input, and you paste in a chunk of text consisting of more than one complete set of commands. Unfortunately, this is a much harder problem: the line editor is already active, and needs to be turned off when the first command is executed. The shell doesn't even know if the remaining text is input to a command or for the shell, so there's simply nothing it can do. However, if you have problems you can trick it: type `tt({)' on a line by itself, then paste the input, then type `tt(})' on a line by itself. The shell will not execute anything until the final brace is read; all input is read as continuation lines (this may require the fixes referred to above in order to be reliable). ) chapter(The mysteries of completion) Programmable completion using the `compctl' command is one of the most powerful, and also potentially confusing, features of zsh; here I give a short introduction. There is a set of example completions supplied with the source in Misc/compctl-examples; completion definitions for many of the most obvious commands can be found there. If this confuses you, you may like to know that there is a new, more elegant completion system which appeared in version 3.1.6. This is based on functions called automatically for completion in particular contexts (for example, there is a function called tt(_cd) to handle completion for the tt(cd) command) and is installed automatically with the shell, so all you need to do, in principal, is to arrange for this to be loaded. Putting `tt(autoload -U compinit; compinit)' in your tt(.zshrc) should be enough if the system is installed properly. The rest of this section talks about the old completion system. sect(What is completion?) `Completion' is where you hit a particular command key (TAB is the standard one) and the shell tries to guess the word you are typing and finish it for you --- a godsend for long file names, in particular, but in zsh there are many, many more possibilities than that. There is also a related process, `expansion', where the shell sees you have typed something which would be turned by the shell into something else, such as a variable turning into its value ($PWD becomes /home/users/mydir) or a history reference (!! becomes everything on the last command line). In zsh, when you hit TAB it will look to see if there is an expansion to be done; if there is, it does that, otherwise it tries to perform completion. (You can see if the word would be expanded --- not completed --- by TAB by typing mytt(\C-x g), which lists expansions.) Expansion is generally fairly intuitive and not under user control; for the rest of the chapter I will discuss completion only. sect(What sorts of things can be completed?) label(42) The simplest sort is filename completion, mentioned above. Unless you have made special arrangements, as described below, then after you type a command name, anything else you type is assumed by the completion system to be a filename. If you type part of a word and hit TAB, zsh will see if it matches the first part a file name and if it does it will automatically insert the rest. The other simple type is command completion, which applies (naturally) to the first word on the line. In this case, zsh assumes the word is some command to be executed lying in your $PATH (or something else you can execute, like a builtin command, a function or an alias) and tries to complete that. Other forms of completion have to be set up by special arrangement. See the manual entry for compctl for a list of all the flags: you can make commands complete variable names, user names, job names, etc., etc. For example, one common use is that you have an array variable, tt($hosts), which contains names of other machines you use frequently on the network: verb( hosts=(fred.ph.ku.ac.uk snuggles.floppy-bunnies.com here.there.edu) ) then you can tell zsh that when you use telnet (or ftp, or ...), the argument will be one of those names: verb( compctl -k hosts telnet ftp ... ) so that if you type mytt(telnet fr) and hit TAB, the rest of the name will appear by itself. An even more powerful option to tt(compctl) (tt(-g)) is to tell zsh that only certain sorts of filename are allowed. The argument to tt(-g) is exactly like a glob pattern, with the usual wildcards mytt(*), mytt(?), etc. In the compctl statement it needs to be quoted to avoid it being turned into filenames straight away. For example, verb( compctl -g '*.(ps|eps)' ghostview ) tells zsh that if you type TAB on an argument after a ghostview command, only files ending in mytt(.ps) or mytt(.eps) should be considered for completion. A useful addition for zsh from version 3.1 is directory completion: verb( compctl -/ cd ) Before, you had to use tt(-g), but this is neater: it takes care of things like ignoring directories beginning with a dot unless you've typed the dot yourself, and whole directory paths are understood. Note that flags may be combined; if you have more than one, all the possible completions for all of them are put into the same list, all of them being possible completions. So verb( compctl -k hosts -f rcp ) tells zsh that rcp can have a hostname or a filename after it. (You really need to be able to handle host:file, which is where programmable completion comes in, see link(4.5)(45).) Also, from version 3.1 you can always handle directories at the same time as other files just by adding tt(-/) to the list. sect(How does zsh deal with ambiguous completions?) Often there will be more than one possible completion: two files start with the same characters, for example. Zsh has a lot of flexibility for what it does here via its options. The default is for it to beep and completion to stop until you type another character. You can type tt(\C-D) to see all the possible completions. (That's assuming you're at the end of the line, otherwise tt(\C-D) will delete the next character and you have to use tt(ESC-\C-D).) This can be changed by the following options, among others: itemize( it() with tt(NO_BEEP) set, that annoying beep goes away it() with tt(NO_LIST_BEEP), beeping is only turned off for ambiguous completions it() with tt(AUTO_LIST) set, when the completion is ambiguous you get a list without having to type tt(\C-D) it() with tt(LIST_AMBIGOUS), this is modified so that nothing is listed if there is an unambiguous prefix or suffix to be inserted it() with tt(MENU_COMPLETE) set, one completion is always inserted completely, then when you hit TAB it changes to the next, and so on until you get back to where you started it() with tt(AUTO_MENU), you only get the menu behaviour when you hit TAB again on the ambiguous completion. it() Finally, although it affects all completion lists, including those explicitly requested, note also tt(ALWAYS_LAST_PROMPT), which causes the cursor to return to the line you were editing after printing the list, provided that is short enough. ) Combinations of these are possible; for example, tt(AUTO_LIST) and tt(AUTO_MENU) together give an intuitive combination. Note that from version 3.1 tt(LIST_AMBIGUOUS) is set by default; if you use autolist, you may well want to `unsetopt listambiguous'. sect(How do I complete in the middle of words / just what's before the cursor?) Sometimes you have a word on the command-line (let's stick to file names) which is incomplete in the middle. Normally if you hit tab in zsh, it will simply go to the end of the word and try to complete there. However, there are two ways of changing this. First, there is the option COMPLETE_IN_WORD. This tries to fill in the word at the point of the cursor. For example, if the current directory contains mytt(foobar), then with the option set, you can complete mytt(fbar) to mytt(foobar) by moving the cursor to the mytt(b) and hitting tab. That's not the full story, however. Sometimes you just want the part of the word before the cursor completed. For example, the word is mytt(/usr/loc/b), which you want to complete to mytt(/usr/local/bin). Normally, zsh won't do this in one go because there are two bits missing (but see below!), so you need to complete the mytt(/usr/loc) on its own first. For this you need the function tt(expand-or-complete-prefix): it works mostly like the usual function bound to tab, but it ignores anything on the right of the cursor. If you always want this behaviour (some other shells do this), bind it to tab; otherwise put another binding, e.g. mytt(^X TAB) in tt(~/.zshrc): verb( bindkey "^X^I" expand-or-complete-prefix ) then in the example you can move to just after mytt(/usr/loc), hit whatever key you've just bound, move to the end, and hit tab. (Note that tt(AUTO_REMOVE_SLASH) behaviour applies here, see the manual.) Even that doesn't exhaust the possibilities. Included with the source distribution is the file tt(Functions/multicomp), a function which you can bind as an alternative form of default completion (see below for a description of alternative completion), e.g. verb( compctl -D -f + -U -Q -K multicomp ) and whole sequences of directories, like mytt(/usr/loc/b) or even mytt(/u/l/b) can be completed in one go. It works best with menucompletion if the result is ambiguous. sect(How do I get started with programmable completion?) label(45) Finally, the hairiest part of completion. It is possible to get zsh to consider different completions not only for different commands, but for different words of the same command, or even to look at other words on the command line (for example, if the last word was a particular flag) and decide then. There are really two sorts of things to worry about. The simpler is alternative completion: that just means zsh will try one alternative, and only if there are no possible completions try the next. For example verb( compctl -g '*.ps' + -f lpr ) says that after lpr you'd prefer to find only mytt(.ps) files, so if there are any, only those are used, but if there aren't any, any old file is a possibility. You can also have a tt(+) with no flags after it, which tells zsh that it's to treat the command like any other if nothing was found. That's only really useful if your default completion is fancy, i.e. you have done something with mytt(compctl -D) to tell zsh how commands which aren't specially handled are to have their arguments completed. The second sort is the hard one. Following a mytt(-x), zsh expects that the next thing will be some completion code, which is a single letter followed by an argument in square brackets. For example mytt(p[1]): mytt(p) is for position, and the argument tells it to look at position 1; that says that this completion only applies to the word immediately after the command. You can also say mytt(p[1,3]) which says the completion only applies to the word if it's between the first and third words, inclusive, after the command, and so on. See the list in the `compctl' manual entry for a list of these conditions: some conditions take one argument in the square brackets, some two. Usually, negative numeric arguments count backwards from the end (for example, mytt(p[-1]) applies to the last word on the line). (Note the difference in the ways mytt(+) and mytt(-x) work. A mytt(+) completion will always try and find completions for what's before the mytt(+) first; it will only produce a list for what's after if the first list was empty. On the other hand, if a condition for a mytt(-x) matches, the appropriate set of completions is always used, even if the list of completions produced is empty.) The condition is then followed by the flags as usual (as in link(4.2)(42)), and possibly other condition/flag sets following a single -; the whole lot ends with a double -- before the command name. In other words, each extended completion section looks like this: verb( -x ... [ - ... ...] -- ) Let's look at rcp again: this assumes you've set up tt($hosts) as above. This uses the mytt(n[,]) flag, which tells zsh to look for the tt()'th occurrence of in the word, ignoring anything up to and including that. We'll use it for completing the bits of rcp's mytt(user@host:file) combination. (Of course, the file name is on the local machine, not mytt(host), but let's ignore that; it may still be useful.) COMMENT(-- note space after backslash --) verb( compctl -k hosts -S ':' + -f -x 'n[1,:]' -f - \ 'n[1,@]' -k hosts -S ':' -- rcp ) This means: (1) try and complete a hostname (the bit before the mytt(+)), if successful add a mytt(:) (tt(-S) for suffix); (2) if that fails move on to try the code after the mytt(+): look and see if there is a mytt(:) in a word (the mytt(n[1,:])); if there is, complete filenames (tt(-f)) after the first of them; (3) otherwise look for an mytt(@) and complete hostnames after the first of them (the mytt(n[1,@])), adding a mytt(:) if successful; (4) if all else fails use the mytt(-f) before the mytt(-x) and try to complete files. So the rules for order are (1) try anything before a mytt(+) before anything after it (2) try the conditions after a tt(-x) in order until one succeeds (3) use the default flags before the tt(-x) if none of the conditions was true. Different conditions can also be combined. There are three levels of this (in decreasing order of precedence): enumerate( myeit() multiple square brackets after a single condition give alternatives: for example, mytt(s[foo][bar]) says apply the completion if the word begins with mytt(foo) or mytt(bar), myeit() spaces between conditions mean both must match: for example, mytt(p[1] s[-]) says this completion only applies for the first word after the command and only if it begins with a mytt(-), myeit() commas between conditions mean either can match: for example, mytt(c[-1,-f], s[-f]) means either the previous word (-1 relative to the current one) is tt(-f), or the current word begins with tt(-f) --- useful to use the same completion whether or not the tt(-f) has a space after it. ) You must be careful to put the whole expression inside quotation marks, so that it appears as a single argument to tt(compctl). Here's a useless example just to show a general mytt(-x) completion. verb( compctl -f -x 'c[-1,-u][-1,-U] p[2], s[-u]' -u - \ 'c[-1,-j]' -P % -j -- foobar ) The way to read this is: for command mytt(foobar), look and see if (((the word before the current one is tt(-u)) or (the word before the current one is tt(-U))) and (the current word is 2)) or (the current word begins with tt(-u)); if so, try to complete user names. If the word before the current one is tt(-j), insert the prefix mytt(%) before the current word if it's not there already and complete job names. Otherwise, just complete file names. sect(And if programmable completion isn't good enough?) ...then your last resort is to write a shell function to do it for you. By combining the mytt(-U) and mytt(-K func) flags you can get almost unlimited power. The mytt(-U) tells zsh that whatever the completion produces is to be used, even if it doesn't fit what's there already (so that gets deleted when the completion is inserted). The mytt(-K func) tells zsh a function name. The function is passed the part of the word already typed, and can read the rest of the line with mytt(read -c). It can return a set of completions via the mytt(reply) array, and this becomes the set of possible completions. The best way to understand this is to look at mytt(multicomp) and other functions supplied with the zsh distribution. chapter(The future of zsh) sect(What bugs are currently known and unfixed? (Plus recent \ important changes)) label(51) Here are some of the more well-known ones, very roughly in decreasing order of significance. Many of these can also be counted against differences from ksh in question link(2.1)(21); note that \ this applies to the latest beta version and that simple bugs are often fixed quite quickly. There is a file Etc/BUGS in the source distribution with more detail. itemize( it() mytt(time) is ignored with builtins and can't be used with mytt({...}). it() When showing completion lists with exactly 80 columns, some terminals print an extra newline which messes up zsh's logic. it() mytt(set -x) (mytt(setopt xtrace)) still has a few glitches; these are mostly fixed in 3.1.6. it() Zsh's notion of the current line number (via tt($LINENO)) is sometimes not well handled, particularly when using functions and traps. This should also work reliably from 3.0.6 and 3.1.6. it() In vi mode, mytt(u) can go past the original modification point. it() The singlelinezle option has problems with prompts containing escapes. it() The mytt(r) command does not work inside mytt($(...)) or mytt(`...`) expansions. This is fixed in 3.1. it() mytt(typeset) handling is non-optimal, particularly with regard to flags, and is ksh-incompatible in unpredictable ways. 3.1.6 has been overhauled, but remaining glitches are to be expected. it() Nested closures in extended globbing and pattern matching, such as verb( [[ fofo = (fo#)# ]] ) were not correctly handled, and there were problems with complicated exclusions using mytt(^) or mytt(~). These are fixed in version 3.1.3. ) Note that a few recent changes introduce incompatibilities (these are not bugs): Changes after zsh 3.0 (3.1.x is still currently in beta): itemize( it() The options tt(ALWAYS_LAST_PROMPT) (return to the line you were editing after displaying completion lists) and tt(LIST_AMBIGUOUS) (don't do tt(AUTO_LIST) if there was an unambiguous prefix that could be inserted, i.e. only list if it is ambiguous what to insert next) are now set by default. This is in response to complaints that too many zsh features are never noticed by many users. To turn them off, just put mytt(unsetopt alwayslastprompt listambiguous) in your tt(.zshrc) file. it() In 3.1.5, tt(history-search-{forward,backward}) only find previous lines where the first word is the same as the current one. For example, verb( compp ) will find lines in the history like mytt(comp -edit emacs), but not mytt(compress file) any more. For this reason, mytt(\M-n) and mytt(\M-p) use tt(history-beginning-search-{forward,backward}) which search for a line with the same prefix up to the cursor position. From 3.1.6, there is a different implementation which makes this closer (though not identical) to the old behaviour, and the traditional bindings have been restored.. The story for the tt({up,down}-line-or-search) commands is similar. it() In vi insert mode, the cursor keys no longer work. The following will bind them: COMMENT(-- note space after backslash --) verb( bindkey -M viins '^[[D' vi-backward-char '^[[C' vi-forward-char \ '^[[A' up-line-or-history '^[[B' down-line-or-history ) (unless your terminal requires mytt(^[O) instead of mytt(^[[)). The rationale is that the insert mode and command mode keymaps for keys with prefixes are now separate. ) Changes since zsh 2.5: itemize( it() The left hand of an assignment is no longer substituted. Thus, mytt($1=$2) will not work. You can use something like mytt(eval "$1=\$2"), which should have the identical effect. it() Signal traps established with the `trap' builtin are now called with the environment of the caller, as in ksh, instead of as a new function level. Traps established as functions (e.g. mytt(TRAPINT() {...})) work as before. it() The tt(NO_CLOBBER) option is now -C and tt(PRINT_EXIT_VALUE) -1; they used to be the other way around. (Use of names rather than letters is generally recommended.) it() mytt([[) is a reserved word, hence must be separated from other characters by whitespace; mytt({) and mytt(}) are also reserved words if the tt(IGNORE_BRACES) option is set. it() The option tt(CSH_JUNKIE_PAREN) has been removed: csh-like code now always does what it looks like it does, so mytt(if ( ... ) ...) executes the code in parentheses in a subshell. To make this useful, the syntax expected after an mytt(if), etc., is less strict than in other shells. it() mytt(foo=*) does not perform globbing immediately on the right hand side of the assignment; the old behaviour now requires the option tt(GLOB_ASSIGN). (mytt(foo=(*)) is and has always been the consistent way of doing this.) it() tt(<>) performs redirection of input and output to the specified file. For numeric globs, you now need tt(<->). it() The command line qualifiers tt(exec), tt(noglob), tt(command), \ tt(-) are now treated more like builtin commands: previously they were syntactically special. This should make it easier to perform tricks with them (disabling, hiding in parameters, etc.). it() The pushd builtin has been rewritten for compatibility with other shells. The old behavour can be achieved with a shell function. it() The current version now uses tt(~)'s for directory stack substitution instead of tt(=)'s. This is for consistency: all other directory substitution (tt(~user), tt(~name), tt(~+), ...) used a tilde, while tt(=) caused problems with tt(=program) substitution. it() The tt(HISTLIT) option was broken in various ways and has been removed: the rewritten history mechanism doesn't alter history lines, making the option unnecessary. it() History expansion is disabled in single-quoted strings, like other forms of expansion -- hence exclamation marks there should not be backslashed. it() The mytt($HISTCHARS) variable is now mytt($histchars). Currently both are tied together for compatibility. it() The tt(PROMPT_SUBST) option now performs backquote expansion -- hence you should quote these in prompts. (SPROMPT has changed as a result.) it() Quoting in prompts has changed: close parentheses inside ternary expressions should be quoted with a tt(%); history is now tt(%!), not tt(!). Backslashes are no longer special. ) sect(Where do I report bugs, get more info / who's working on zsh?) label(52) The shell is being maintained by various (entirely self-appointed) subscribers to the mailing list, verb( zsh-workers@sunsite.auc.dk ) so mail on any issues (bug reports, suggestions, complaints...) related to the development of the shell should be sent there. If you want someone to mail you directly, say so. Most patches to zsh appear there first. Note that this location has just changed (January 1999), and the instructions to go with it are slightly different --- in particular, if you are already subscribed, the instructions about how to unsubscribe are different. Please note when reporting bugs that many exist only on certain architectures, which the developers may not have access to. In this case debugging information, as detailed as possible, is particularly welcome. Two progressively lower volume lists exist, one with messages concerning the use of zsh, verb( zsh-users@sunsite.auc.dk ) and one just containing announcements: about releases, about major changes in the shell, or this FAQ, for example, verb( zsh-announce@sunsite.auc.dk ) (posting to the last one is currently restricted). Note that you should only join one of these lists: people on zsh-workers receive all the lists, and people on zsh-users will also receive the announcements list. The lists are handled by an automated server. The instructions for zsh-announce and zsh-users are the same as for zsh-workers: just change zsh-workers to whatever in the following. To join zsh-workers, send email to verb( zsh-workers-subscribe@sunsite.auc.dk ) (the actual content is unimportant). Replace tt(subscribe) with tt(unsubscribe) to unsubscribe. The mailing software (tt(ezlm)) has various bells and whistles: you can retrieve archived messages. Mail email(zsh-workers-help@sunsite.auc.dk) for detailed information. Adminstrative matters are best sent to email(zsh-workers-owner@sunsite.auc.dk). The list maintainer's real name is email(Karsten Thygesen ). An archive of mailings for the last few years can be found at url(http://www.zsh.org/mla/)(http://www.zsh.org/mla/) at the main zsh archive in Australia. Of course, you can also post zsh queries to the Usenet group comp.unix.shell; if all else fails, you could even e-mail me. sect(What's on the wish-list?) With version 3, the code is much cleaner than before, but still bears the marks of the ages and many things could be done much better with a rewrite. A more efficient set of code for lexing/parsing/execution might also be an advantage. Volunteers are particularly welcome for these tasks. Here are the latest changes, which appeared in zsh 3.1.6. itemize( it() Even more powerful new completion system, based on shell functions, allowing much more detailed control both over generation of matches for completion and how they are inserted and displayed. A set of functions which work `out of the box' will be available, including many functions for external commands: files in tar archives can be listed for extraction as if they were real files; GNU commands which accept the mytt(--help) option can generate completion lists for themselves on the fly, etc., etc. You can have old-style tt(compctl)-based completions for some commands, and new-style ones for others; you can bind particular completion commands of your own definition to key-strokes. it() Other completion enhancements: matching control, allowing case-insensitive matching and wild card anchors, e.g. mytt(z_t) can allow a wildcard before the mytt(_) so that this will expand to mytt(zle_tricky.c) --- all under user control; completions can be grouped; a new completion command, menu-select, allows real menu selection --- you can move the cursor around to choose a completion. it() Case-insensitive and approximate matching in the globbing code: for example, mytt((#ia2)readme) matches the string mytt(readme) case-insensitively with up to two errors, such as tt(README), tt(READ.ME), tt(_README_), tt(Read!Me!). The new completion system knows about these, allowing correcting completion, e.g. mytt(mkaef) can be made to complete to mytt(Makefile). it() Associative arrays, declared with mytt(typeset -A aname); syntax for creating, accessing and deleting elements of these. it() Users can create their own tt(foopath)/tt(FOOPATH) array/path combinations, just like tt(path) and tt(PATH). it() A dynamically loadable library for FTP, complete with a suite of functions to make it easy to use. This allows you to use the shell's capabilities for scripting, line editing, completion, I/O redirection, directory management etc. within an FTP session. ) Other future possibilities which have been suggested: itemize( it() Further improvements in integrating the line editor with shell functions. it() Ksh compatibility could be improved. it() Option for glob qualifiers to follow perl syntax (a traditional item). ) sect(Will zsh have problems in the year 2000?) (This information was written by Bart Schaefer. Note it is a description of the state of affairs as seen by the developers, it is not a guarantee!) You can confirm the following by looking at the source code yourself if necessary; there's no other definitive reference: Zsh uses UNIX/POSIX time_t, timeval, and tm data types for internal date manipulations. These types either do not store year values at all (for example, time_t is measured in seconds since midnight, Jan 1, 1970) or store them as integer types and NOT as pairs of digits. Thus there can be no overflows at year 2000. On some unix systems, time_t is a 32-bit value and will overflow during the year 2038, but more modern systems use a 64-bit time_t. The only input and output of dates that zsh performs for its own use is optional history time-stamping. This is performed using time_t values converted to long integers, which are either 32 or 64 bits, see above. Note, however, that zsh does provide facilities for formatted date output, in particular in prompt escapes such as mytt(%W) and mytt(%D) using mytt(print -P), so it's possible that scripts written for zsh might employ 2-digit years. Shell scripts should always be considered separate programs and therefore evaluated individually. nsect(Acknowledgments:) Thanks to zsh-list, in particular Bart Schaefer, for suggestions regarding this document. Zsh has been in the hands of archivists Jim Mattson, Bas de Bakker, Richard Coleman, Zoltan Hidvegi and Andrew Main, and the mailing list has been run by Peter Gray, Rick Ohnemus, Richard Coleman and Karsten Thygesen, all of whom deserve thanks. The world is eternally in the debt of Paul Falstad for inventing zsh in the first place (though the wizzo extended completion is by Sven Wischnowsky). nsect(Copyright Information:) This document is copyright (C) P.W. Stephenson, 1995, 1996, 1997, 1998, 1999. This text originates in the U.K. and the author asserts his moral rights under the Copyrights, Designs and Patents Act, 1988. Permission is hereby granted, without written agreement and without license or royalty fees, to use, copy, modify, and distribute this documentation for any purpose, provided that the above copyright notice appears in all copies of this documentation. Remember, however, that this document changes monthly and it may be more useful to provide a pointer to it rather than the entire text. A suitable pointer is "information on the Z-shell can be obtained on the World Wide Web at URL http://sunsite.auc.dk/zsh/".