From 5c1f3b65a6f5abeae8459f41adb8fd2316971515 Mon Sep 17 00:00:00 2001 From: Peter Stephenson Date: Thu, 6 Feb 2003 12:21:49 +0000 Subject: 18202: New TCP function system plus small error message change in ztcp. --- Doc/Makefile.in | 6 +- Doc/Zsh/manual.yo | 8 + Doc/Zsh/modules.yo | 2 +- Doc/Zsh/tcpsys.yo | 694 +++++++++++++++++++++++++++++++++++++++++++++++++++++ Doc/Zsh/zftpsys.yo | 2 +- Doc/zsh.yo | 2 + Doc/zshtcpsys.yo | 3 + 7 files changed, 713 insertions(+), 4 deletions(-) create mode 100644 Doc/Zsh/tcpsys.yo create mode 100644 Doc/zshtcpsys.yo (limited to 'Doc') diff --git a/Doc/Makefile.in b/Doc/Makefile.in index 7ed9d02d4..e5f691f08 100644 --- a/Doc/Makefile.in +++ b/Doc/Makefile.in @@ -47,7 +47,7 @@ TEXI2HTML = texi2html -expand info -split chapter # man pages to install MAN = zsh.1 zshbuiltins.1 zshcompctl.1 zshcompwid.1 zshcompsys.1 \ zshcontrib.1 zshexpn.1 zshmisc.1 zshmodules.1 \ -zshoptions.1 zshparam.1 zshzftpsys.1 zshzle.1 zshall.1 +zshoptions.1 zshparam.1 zshtcpsys.1 zshzftpsys.1 zshzle.1 zshall.1 # yodl documentation @@ -72,7 +72,7 @@ Zsh/filelist.yo Zsh/files.yo Zsh/func.yo Zsh/grammar.yo Zsh/manual.yo \ Zsh/index.yo Zsh/intro.yo Zsh/invoke.yo Zsh/jobs.yo Zsh/metafaq.yo \ Zsh/modules.yo Zsh/modlist.yo Zsh/modmenu.yo Zsh/manmodmenu.yo $(MODDOCSRC) \ Zsh/options.yo Zsh/params.yo Zsh/prompt.yo Zsh/redirect.yo Zsh/restricted.yo \ -Zsh/seealso.yo Zsh/zftpsys.yo Zsh/zle.yo +Zsh/seealso.yo Zsh/tcpsys.yo Zsh/zftpsys.yo Zsh/zle.yo # ========== DEPENDENCIES FOR BUILDING ========== @@ -182,6 +182,8 @@ zshoptions.1: Zsh/options.yo zshparam.1: Zsh/params.yo +zshtcpsys.1: Zsh/tcpsys.yo + zshzftpsys.1: Zsh/zftpsys.yo zshzle.1: Zsh/zle.yo diff --git a/Doc/Zsh/manual.yo b/Doc/Zsh/manual.yo index fb23e6fcf..9fb81d99a 100644 --- a/Doc/Zsh/manual.yo +++ b/Doc/Zsh/manual.yo @@ -33,6 +33,7 @@ menu(Completion Widgets) menu(Completion System) menu(Completion Using compctl) menu(Zsh Modules) +menu(TCP Function System) menu(Zftp Function System) menu(User Contributions) @@ -137,6 +138,13 @@ Zsh Modules includefile(Zsh/manmodmenu.yo) +TCP Function System + +menu(TCP Functions) +menu(TCP Parameters) +menu(TCP Examples) +menu(TCP Bugs) + Zftp Function System menu(Installation) diff --git a/Doc/Zsh/modules.yo b/Doc/Zsh/modules.yo index 828b97d37..cbec478e3 100644 --- a/Doc/Zsh/modules.yo +++ b/Doc/Zsh/modules.yo @@ -1,4 +1,4 @@ -texinode(Zsh Modules)(Zftp Function System)(Completion Using compctl)(Top) +texinode(Zsh Modules)(TCP Function System)(Completion Using compctl)(Top) chapter(Zsh Modules) cindex(modules) sect(Description) diff --git a/Doc/Zsh/tcpsys.yo b/Doc/Zsh/tcpsys.yo new file mode 100644 index 000000000..40c92c1cb --- /dev/null +++ b/Doc/Zsh/tcpsys.yo @@ -0,0 +1,694 @@ +texinode(TCP Function System)(Zftp Function System)(Zsh Modules)(Top) +chapter(TCP Function System) +cindex(TCP function system) +cindex(ztcp, function system based on) +sect(Description) + +A module tt(zsh/net/tcp) is provided to provide network I/O over +TCP/IP from within the shell; see its description in +ifzman(\ +zmanref(zshmodules) +)\ +ifnzman(\ +noderef(Zsh Modules) +). This manual page describes a function suite based on the module. The +functions will usually be installed at the same time as the module if that +is present on your system, in which case they will be available for +autoloading in the default function search path. In addition to the +tt(zsh/net/tcp) module, the tt(zsh/zselect) module is used to implement +timeouts on read operations. For troubleshooting tips, consult the +corresponding advice for the tt(zftp) functions described in +ifzman(\ +zmanref(zshftpsys) +)\ +ifnzman(\ +noderef(Zftp Function System) +). + +There are functions corresponding to the basic I/O operations open, close, +read and send, named tt(tcp_open) etc., as well as a function +tt(tcp_expect) for pattern match analysis of data read as input. The +system makes it easy to receive data from and send data to multiple named +sessions at once. In addition, it can be linked with the shell's line +editor in such a way that input data is automatically shown at the +terminal. Other facilities available including logging, filtering and +configurable output prompts. + +To use the system where it is available, it should be enough to +`tt(autoload -U tcp_open)' and run tt(tcp_open) as documented below to +start a session. The tt(tcp_open) function will autoload the remaining +functions. + +startmenu() +menu(TCP Functions) +menu(TCP Parameters) +menu(TCP Examples) +menu(TCP Bugs) +endmenu() + +texinode(TCP Functions)(TCP Parameters)()(TCP Function System) +sect(TCP User Functions) + +subsect(Basic I/O) + +startitem() +findex(tcp_open) +xitem(tt(tcp_open [-qz]) var(host port) tt([) var(sess) tt(])) +xitem(tt(tcp_open [-qz] [ -s) var(sess) tt(| -l) var(sess)tt(,... ] ... )) +item(tt(tcp_open [-qz] [-a) var(fd) tt(| -f) var(fd) tt(] [) var(sess) tt(]))( +Open a new session. In the first and simplest form, open a TCP connection +to host var(host) at port var(port); numeric and symbolic forms are +understood for both. + +If var(sess) is given, this becomes the name of the session which can be +used to refer to multiple different TCP connections. If var(sess) is +not given, the function will invent a numeric name value (note this is +em(not) the same as the file descriptor to which the session is attached). +It is recommended that session names not include `funny' characters, where +funny characters are not well-defined but certainly do not include +alphanumerics or underscores, and certainly do include whitespace. + +In the second case, one or more sessions to be opened are given by name. +A single session name is given after tt(-s) and a comma-separated list +after tt(-l); both options may be repeated as many times as necessary. +The host and port are read from the file tt(.ztcp_sessions) in the same +directory as the user's zsh initialisation files, i.e. usually the home +directory, but tt($ZDOTDIR) if that is set. The file consists of lines +each giving a session name and the corresponding host and port, in that +order (note the session name comes first, not last), separated by +whitespace. + +The third form allows passive and fake TCP connections. If the option +tt(-a) is used, its argument is a file descriptor open for listening for +connections. No function front-end is provided to open such a file +descriptor, but a call to `tt(ztcp -l) var(port)' will create one with the +file descriptor stored in the parameter tt($REPLY). The listening port can +be closed with `tt(ztcp -c) var(fd)'. A call to `tt(tcp_open -a) var(fd)' +will block until a remote TCP connection is made to var(port) on the local +machine. At this point, a session is created in the usual way and is +largely indistinguishable from an active connection created with one of the +first two forms. + +If the option tt(-f) is used, its argument is a file descriptor which is +used directly as if it were a TCP session. How well the remainder of the +TCP function system copes with this depends on what actually underlies this +file descriptor. A regular file is likely to be unusable; a FIFO (pipe) of +some sort will work better, but note that it is not a good idea for two +different sessions to attempt to read from the same FIFO at once. + +If the option tt(-q) is given with any of the three forms, tt(tcp_open) +will not print informational messages, although it will in any case exit +with an appropriate status. + +If the line editor (zle) is in use, which it usually is if and only if the +shell is interactive, tt(tcp_open) installs a handler inside tt(zle) which +will check for new data at the same time as it checks for keyboard input. +This is convenient as the shell consumes no CPU time while waiting; the +test is performed by the operating systems. However, if incoming data +is only to be read explicitly, the option tt(-z) to any of the forms of +tt(tcp_open) prevents the handler from being installed. Note this is not +necessary for executing complete sets of send and read commands from a +function, as zle is not active at this point. Generally speaking, the +handler is only active when the shell is waiting for input at a command +prompt or in the tt(vared) builtin. The option has no effect if zle is not +active; `tt([[ -o zle]])' will test for this. + +The first session to be opened becomes the current session; subsequent +calls to tt(tcp_open) will not change this. The current session is stored +in the parameter tt($TCP_SESS); see below for more detail about the +parameters used by the system. +) +findex(tcp_close) +item(tt(tcp_close [-qn] [ -a | -l) var(sess)tt(,... |) var(sess) tt(... ]))( +Close the named sessions, or the current session if none is given, +or all open sessions if tt(-a) is given. The options tt(-l) and tt(-s) are +both handled for consistency with tt(tcp_open), although the latter is +redundant. + +If the session being closed is the current one, tt($TCP_SESS) is unset, +leaving no current session, even if there are other sessions still open. + +If the session was opened with tt(tcp_open -f), the file descriptor is +closed so long as it is in the range 0 to 9 accessible directly from the +command line. If the option tt(-n) is given, no attempt will be made to +close file descriptors in this case. The tt(-n) option is not used for +genuine tt(ztcp) session; the file descriptors are always closed with the +session. + +If the option tt(-q) is given, no informational messages will be printed. +) +findex(tcp_read) +xitem(tt(tcp_read [-bdq] [ -t) var(TO) tt(] [ -T) var(TO) tt(])) +item( tt([ -a | -u) var(fd) tt(... | -l) var(sess)tt(,... | -s) var(sess) tt(...]))( +Perform a read operation on the current session, or on a list of sessions +if any are given (the first form), or all open sessions (the second form). +Any of the tt(-u), tt(-l) or tt(-s) options may be repeated or mixed +together. The tt(-u) option specifies a file descriptor directly (only +those managed by this system are useful), the other two specify sessions as +described for tt(tcp_open) above. If tt(-a) is given, all sessions ares +examined for new data. + +The function checks for new data available on all the sessions listed. +Unless the tt(-b) option is given, it will not block waiting for new data. +Any one line of data from any of the available sessions will be read, +stored in the parameter tt($TCP_LINE), and displayed to standard output +unless tt($TCP_SILENT) contains a non-empty string. When printed to +standard output the string tt($TCP_PROMPT) will be shown at the start of +the line; the default form for this includes the name of the session being +read. See below for more information on these parameters. In this mode, +tt(tcp_read) can be called repeatedly until it returns status 2 which +indicates all pending input from all specified sessions has been handled. + +With the option tt(-b), equivalent to an infinite timeout, the function +will block until a line is available to read from one of the specified +sessions. However, only a single line is returned. + +The option tt(-d) indicates that all pending input should be drained. In +this case tt(tcp_read) may process multiple lines in the manner given +above; only the last is stored in tt($TCP_LINE), but the complete set is +stored in the array tt($tcp_lines). This is cleared at the start of each +call to tt(tcp_read). + +The options tt(-t) and tt(-T) specify a timeout in seconds, which may be a +floating point number for increased accuracy. With tt(-t) the timeout is +applied before each line read. With tt(-T), the timeout applies to the +overall operation, possibly including multiple read operations if the +option tt(-d) is present; without this option, there is no distinction +between tt(-t) and tt(-T). + +The function does not print informational messages, but if the option +tt(-q) is given, no error message is printed for a non-existent session. + +A return value of 2 indicates a timeout or no data to read. Any other +non-zero return value indicates some error condition. + +See tt(tcp_log) for how to control where data is sent by tt(tcp_read). +) +findex(tcp_send) +xitem(tt(tcp_send [-nq] [ -s) var(sess) tt(| -l) var(sess)tt(,... ]) var(data) tt(...)) +item(tt(tcp_send [-nq] -a) var(data) tt(...))( +Send the supplied data strings to all the specified sessions in turn. The +underlying operation differs little from a `tt(print -r)' to the session's +file descriptor, although it attempts to prevent the shell from dying owing +to a tt(SIGPIPE) caused by an attempt to write to a defunct session. + +The option tt(-n) prevents tt(tcp_send) from putting a newline at the end +of the data strings. + +The remaining options all behave as for tt(tcp_read). + +The data arguments are not further processed once they have been passed to +tt(tcp_send); they are simply passed down to tt(print -r). + +If the parameter tt($TCP_OUTPUT) is a non-empty string and logging is +enabled then the data sent to each session will be echoed to the log +file(s) with tt($TCP_OUTPUT) in front where appropriate, much in the manner +of tt($TCP_PROMPT). +) +enditem() + +subsect(Session Management) + +startitem() +findex(tcp_alias) +xitem(tt(tcp_alias [-q]) var(alias)tt(=)var(sess) tt(...)) +xitem(tt(tcp_alias [-q] [) var(alias) tt(] ...)) +item(tt(tcp_alias -d [-q]) var(alias) tt(...))( +This function is not particularly well tested. + +The first form creates an alias for a session name; var(alias) can then be +used to refer to the existing session var(sess). As many aliases may be +listed as required. + +The second form lists any aliases specified, or all aliases if none. + +The third form deletes all the aliases listed. The underlying sessions are +not affected. + +The option tt(-q) suppresses an inconsistently chosen subset of error +messages. +) +findex(tcp_log) +item(tt(tcp_log [-asc] [ -n | -N ] [) var(logfile) tt(]))( +With an argument var(logfile), all future input from tt(tcp_read) will be +logged to the named file. Unless tt(-a) (append) is given, this file will +first be truncated or created empty. With no arguments, show the current +status of logging. + +With the option tt(-s), per-session logging is enabled. Input from +tt(tcp_read) is output to the file var(logfile).var(sess). As the +session is automatically discriminated by the filename, the contents are +raw (no tt($TCP_PROMPT)). The option tt(-a) applies as above. +Per-session logging and logging of all data in one file are not mutually +exclusive. + +The option tt(-c) closes all logging, both complete and per-session logs. + +The options tt(-n) and tt(-N) respectively turn off or restore output of +data read by tt(tcp_read) to standard output; hence `tt(tcp_log -cn)' turns +off all output by tt(tcp_read). + +The function is purely a convenient front end to setting the parameters +tt($TCP_LOG), tt($TCP_LOG_SESS), tt($TCP_SILENT), which are described below. +) +findex(tcp_rename) +item(tt(tcp_rename) var(old) var(new))( +Rename session var(old) to session var(new). The old name becomes invalid. +) +findex(tcp_sess) +item(tt(tcp_sess [) var(sess) tt([) var(command) tt(... ] ]))( +With no arguments, list all the open sessions and associated file +descriptors. The current session is marked with a star. For use in +functions, direct access to the parameters tt($tcp_by_name), tt($tcp_by_fd) +and tt($TCP_SESS) is probably more convenient; see below. + +With a var(sess) argument, set the current session to var(sess). +This is equivalent to changing tt($TCP_SESS) directly. + +With additional arguments, temporarily set the current session while +executing the string tt(command ...). The first argument is re-evaluated +so as to expand aliases etc., but the remaining arguments are passed +through as the appear to tt(tcp_sess). The original session is restored +when tt(tcp_sess) exits. +) +enditem() + +subsect(Advanced I/O) + +startitem() +findex(tcp_command) +item(tt(tcp_command) var(send-options) tt(...) var(send-arguments) tt(...))( +This is a convenient front-end to tt(tcp_send). All arguments are passed +to tt(tcp_send), then the function pauses waiting for data. While data is +arriving at least every tt($TCP_TIMEOUT) (default 0.3) seconds, data is +handled and printed out according to the current settings. Status 0 is +always returned. + +This is generally only useful for interactive use, to prevent the display +becomming fragmented by output returned from the connection. Within a +programe or function it is generally better to handle reading data by a +more explicit method. +) +findex(tcp_expect) +xitem(tt(tcp_expect [ -q ] [ -p) var(var) tt(] [ -t ) var(to) tt(| -T) var(TO)tt(])) +item(tt( [ -a | -s) var(sess) tt(... | -l) var(sess)tt(,... ]) var(pattern) ...)( +Wait for input matching any of the given var(pattern)s from any of the +specified sessions. Input is ignored until an input line matches one of +the given patterns; at this point status zero is returned, the matching +line is stored in tt($TCP_LINE), and the full set of lines read during the +call to tt(tcp_expect) is stored in the array tt($tcp_expect_lines). + +Sessions are specified in the same way as tt(tcp_read): the default is to +use the current session, otherwise the sessions specified by tt(-a), +tt(-s), or tt(-l) are used. + +Each var(pattern) is a standard zsh extended-globbing pattern; note that it +needs to be quoted to avoid it being expanded immediately by filename +generation. It must match the full line, so to match a substring there +must be a `tt(*)' at the start and end. The line matched against includes +the tt($TCP_PROMPT) added by tt(tcp_read). It is possible to include the +globbing flags `tt(#b)' or `tt(#m)' in the patterns to make backreferences +available in the parameters tt($MATCH), tt($match), etc., as described in +the base zsh documentation on pattern matching. + +Unlike tt(tcp_read), the default behaviour of tt(tcp_expect) is to block +indefinitely until the required input is found. This can be modified by +specifying a timeout with tt(-t) or tt(-T); these function as in +tt(tcp_read), specifying a per-read or overall timeout, respectively, in +seconds, as an integer or floating-point number. As tt(tcp_read), the +function returns status 2 if a timeout occurs. + +The function returns as soon as any one of the patterns given match. If +the caller needs to know which of the patterns matched, the option tt(-p) +var(var) can be used; on return, tt($var) is set to the number of the +pattern using ordinary zsh indexing, i.e. the first is 1, and so on. Note +tha absence of a `tt($)' in front of var(var). To avoid clashes, the +parameter cannot begin with `tt(_expect)'. + +The option tt(-q) is passed directly down to tt(tcp_read). + +As all input is done via tt(tcp_read), all the usual rules about output of +lines read apply. One exception is that the parameter tt($tcp_lines) will +only reflect the line actually matched by tt(tcp_expect); use +tt($tcp_expect_lines) for the full set of lines read during the function +call. +) +findex(tcp_proxy) +item(tt(tcp_proxy))( +This is a simple-minded function to accept a TCP connection and execute a +command with I/O redirected to the connection. Extreme caution should be +taken as there is no security whatsoever and this can leave your computer +open to the world. Ideally, it should only be used behind a firewall. + +The first argument is a TCP port on which the function will listen. + +The remaining arguments give a command and its arguments to execute with +standard input, standard output and standard error redirected to the +file descriptor on which the TCP session has been accepted. +If no command is given, a new zsh is started. This gives everyone on +your network direct access to your account, which in many cases will be a +bad thing. + +The command is run in the background, so tt(tcp_proxy) can then accept new +connections. It continues to accept new connections until interrupted. +) +findex(tcp_spam) +item(tt(tcp_spam [-rtv] [ -a | -s ) var(sess) tt(| -l) var(sess)tt(,... ]) var(cmd) tt(...))( +Execute `var(cmd) tt(...)' for each session in turn. Note this executes +the command and arguments; it does not send the command line as data +unless the tt(-t) (transmit) option is given. + +The sessions may be selected explicitly with the standard tt(-a), tt(-s) or +tt(-l) options, or may be chosen implicitly. If none of the three options +is given the rules are: first, if the array tt($tcp_spam_list) is set, this +is taken as the list of sessions, otherwise all sessions are taken. +Second, any sessions given in the array tt($tcp_no_spam_list) are removed +from the list of sessions. + +Normally, any sessions added by the `tt(-a)' flag or when all sessions are +chosen implicitly are spammed in alphabetic order; sessions given by the +tt($tcp_spam_list) array or on the command line are spammed in the order +given. The tt(-r) flag reverses the order however it was arrived it. + +The tt(-v) flag specifies that a tt($TCP_PROMPT) will be output before each +session. This is output after any modfication to TCP_SESS by the +user-defined tt(tcp_on_spam) function described below. (Obviously that +function is able to generate its own output.) +) +findex(tcp_talk) +item(tt(tcp_talk))( +This is a fairly simple-minded attempt to force input to the line editor to +go straight to the default TCP_SESSION. + +An escape string, tt($TCP_TALK_ESCAPE), default `:', is used to allow +access to normal shell operation. If it is on its own at the start of the +line, or followed only by whitespace, the line editor returns to normal +operation. Otherwise, the string and any following whitespace are skipped +and the remainder of the line executed as shell input without any change of +the line editor's operating mode. + +The current implementation is somewhat deficient in terms of use of the +command history. For this reason, many users will prefer to use some form +of alternative approach for sending data easily to the current session. +One simple approach is to alias some special character (such as `tt(%)') to +`tt(tcp_command --)'. +) +findex(tcp_wait) +item(tt(tcp_wait))( +The sole argument is an integer or floating point number which gives the +seconds to delay. The shell will do nothing for that period except wait +for input on all TCP sessions by calling tt(tcp_read -a). This is similar +to the interactive behaviour at the command prompt when zle handlers are +installed. +) +enditem() + +sect(TCP User-defined Function) + +Certain functions, if defined by the user, will be called by the function +system in certain contexts. This facility depends on the module +tt(zsh/parameter), which is usually available in interactive shells as the +completion system depends on it. None of the functions need by defined; +they simply provide convenient hooks when necessary. + +Typically, these are called after the requested action has been taken, so +that the various parameters will reflect the new state. + +startitem() +findex(tcp_on_alias) +item(tt(tcp_on_alias) var(alias) var(fd))( +When an alias is defined, this function will be called with two arguments: +the name of the alias, and the file descriptor of the corresponding session. +) +findex(tcp_on_close) +item(tt(tcp_on_close) var(sess) var(fd))( +This is called with the name of a session being closed and the file +descriptor which corresponded to that session. Both will be invalid by +the time the function is called. +) +findex(tcp_on_open) +item(tt(tcp_on_open) var(sess) var(fd))( +This is called after a new session has been defined with the session name +and file descriptor as arguments. +) +findex(tcp_on_rename) +item(tt(tcp_on_rename) var(oldsess) var(fd) var(newsess))( +This is called after a session has been renamed with the three arguments +old session name, file descriptor, new session name. +) +findex(tcp_on_spam) +item(tt(tcp_on_spam) var(sess) var(command) tt(...))( +This is called once for each session spammed, just em(before) a command is +executed for a session by tt(tcp_spam). The arguments are the session name +followed by the command list to be executed. If tt(tcp_spam) was called +with the option tt(-t), the first command will be tt(tcp_send). + +This function is called after tt($TCP_SESS) is set to reflect the session +to be spammed, but before any use of it is made. Hence it is possible to +alter the value of tt($TCP_SESS) within this function. For example, the +session arguments to tt(tcp_spam) could include extra information to be +stripped off and processed in tt(tcp_on_spam). + +If the function sets the parameter tt($REPLY) to `tt(done)', the command +line is not executed; in addition, no prompt is printed for the tt(-v) +option to tt(tcp_spam). +) +findex(tcp_on_unalias) +item(tt(tcp_on_unalias) var(alias) var(fd))( +This is called with the name of an alias and the corresponding session's +file descriptor after an alias has been deleted. +) +enditem() + +sect(TCP Utility Functions) + +The following functions are used by the TCP function system but will rarely +if ever need to be called directly. + +startitem() +findex(tcp_fd_handler) +item(tt(tcp_fd_handler))( +This is the function installed by tt(tcp_open) for handling input from +within the line editor, if that is required. It is in the format +documented for the builtin `tt(zle -F)' in +ifzman(\ +zmanref(zshzle) +)\ +ifnzman(\ +noderef(Zle Builtins) +). +) +findex(tcp_output) +item(tt(tcp_output [ -q ] -P) var(prompt) tt(-F) var(fd) tt(-S) var(sess))( +This function is used for both logging and handling output to standard +output, from within tt(tcp_read) and (if tt($TCP_OUTPUT) is set) +tt(tcp_send). + +The var(prompt) to use is specified by tt(-P); the default is the empty +string. It can contain `tt(%s)' which is replaced by the session name, or +`tt(%f)' which is replaced by the session's file descriptor; `tt(%%)' is +replaced by a single `tt(%)'. + +The option tt(-q) suppresses output to standard output, but not to any log +files which are configured. + +The tt(-S) and tt(-F) options are used to pass in the session name and file +descriptor for possible replacement in the prompt. +) +findex(zgprintf) +item(tt(zgprintf) tt(-rPR -%)var(X)tt(=)var(subst) var(fmt) tt([) var(val) tt(... ]))( +This function is used for performing tt(%)-replacement in prompts supplied +to tt(tcp_output). The var(fmt) string is printed to standard output. +The option tt(-%)var(X)tt(=)var(subst) specifies that any occurrence +of tt(%)var(X) in the var(fmt) string should be replaced by var(subst). +These arguments may be repeated for arbitrary var(X). + +The option tt(-r) specifies that the normal tt(print) conventions are not +to be used, as with the corresponding argument to the tt(print) builtin. + +The option tt(-R) specifies that the output is to be left in the parameter +tt($REPLY) instead of being printed. + +The option tt(-P) specifies that unhandled tt(%)-escapes should be +formatted by a call to tt(printf). Each is assumed to consume exactly one +additional var(val) argument. This option is only minimally implemented. +) +enditem() + +texinode(TCP Parameters)(TCP Examples)(TCP Functions)(TCP Function System) +sect(TCP User Parameters) + +Parameters follow the usual convention that uppercase is used for scalars +and integers, while lowercase is used for normal and associative array. +It is always safe for user code to read these parameters; some parameters +may also be set, which are noted explicitly. Other are included in this +group as they are set by the function system for the user's benefit, +i.e. setting them is typically not useful but is benign. + +It is often also useful to make settable parameters local to a function. +For example, `tt(local TCP_SILENT=1)' specifies that data read during the +function call will not be printed to standard output, regardless of the +setting outside the function. Likewise, `tt(local TCP_SESS=)var(sess)' +sets a session for the duration of a function. + +startitem() +findex(tcp_expect_lines) +item(tt(tcp_expect_lines))( +Array. The set of lines read during the last call to tt(tcp_expect), +including the last (tt($TCP_LINE)). +) +findex(tcp_filter) +item(tt(tcp_filter))( +Array. May be set directly. A set of extended globbing patterns which, +if matched in tt(tcp_output), will cause the line not to be printed to +standard output. The patterns should be defined as described for the +arguments to tt(tcp_expect). Output of line to log files is not affected. +) +findex(TCP_LINE) +item(tt(TCP_LINE))( +The last line read by tt(tcp_read), and hence also tt(tcp_expect). +) +findex(TCP_LINE_FD) +item(tt(TCP_LINE_FD))( +The file descriptor from which tt($TCP_LINE) was read. +tt(${tcp_by_fd[$TCP_LINE_FD]}) will give the corresponding session name. +) +findex(tcp_lines) +item(tt(tcp_lines))( +Array. The set of lines read during the last call to tt(tcp_read), +including the last (tt($TCP_LINE)). +) +findex(TCP_LOG) +item(tt(TCP_LOG))( +May be set directly, although it is also controlled by tt(tcp_log). +The name of a file to which output from all sessions will be sent. +The output is proceeded by the usual tt($TCP_PROMPT). If it is not an +absolute path name, it will follow the user's current directory. +) +findex(TCP_LOG_SESS) +item(tt(TCP_LOG_SESS))( +May be set directly, although it is also controlled by tt(tcp_log). +The prefix for a set of files to which output from each session separately +will be sent; the full filename is tt(${TCP_LOG_SESS}.)var(sess). +Output to each file is raw; no prompt is added. If it is not an absolute +path name, it will follow the user's current directory. +) +findex(tcp_nospam_list) +item(tt(tcp_nospam_list))( +Array. May be set directly. See tt(tcp_spam) for how this is used. +) +findex(TCP_OUTPUT) +item(tt(TCP_OUTPUT))( +May be set directly. If a non-empty string, any data sent to a session by +tt(tcp_send) will be logged. The prompt has the same format as +tt(TCP_PROMPT) and the same rules for its use apply: it is used in a file +specified by tt($TCP_LOG), but not in a file generated from +tt($TCP_LOG_SESS). +) +findex(TCP_PROMPT) +item(tt(TCP_PROMPT))( +May be set directly. Used as the prefix for data read by tt(tcp_read) +which is printed to standard output or to the log file given by +tt($TCP_LOG), if any. Any `tt(%s)', `tt(%f)' or `tt(%%)' occurring in the +string will be replaced by the name of the session, the session's +underlying file descriptor, or a single `tt(%)', respectively. +) +findex(TCP_READ_DEBUG) +item(tt(TCP_READ_DEBUG))( +May be set directly. If this has non-zero length, tt(tcp_read) will give +some limited diagnostics about data being read. +) +findex(TCP_SESS) +item(tt(TCP_SESS))( +May be set directly. The current session; must refer to one of the +sessions established by tt(tcp_open). +) +findex(TCP_SILENT) +item(tt(TCP_SILENT))( +May be set directly, although it is also controlled by tt(tcp_log). +If of non-zero length, data read by tt(tcp_read) will not be written to +standard output, though may still be written to a log file. +) +findex(tcp_spam_list) +item(tt(tcp_spam_list))( +Array. May be set directly. See the description of the function +tt(tcp_spam) for how this is used. +) +findex(TCP_TALK_ESCAPE) +item(tt(TCP_TALK_ESCAPE))( +May be set directly. See the description of the function tt(tcp_talk) for +how this is used. +) +findex(TCP_TIMEOUT) +item(tt(TCP_TIMEOUT))( +May be set directly. Currently this is only used by the function +tt(tcp_command), see above. +) +enditem() + +sect(TCP Utility Parameters) + +These parameters are controlled by the function system; they may be read +directly, but should not usually be set by user code. + +startitem() +findex(tcp_aliases) +item(tt(tcp_aliases))( +Associative array. The keys are the names of sessions established with +tt(tcp_open); each value is a space-separated list of aliases which refer +to that session. +) +findex(tcp_by_fd) +item(tt(tcp_by_fd))( +Associative array. The keys are session file descriptors; each +value is the name of that session. +) +findex(tcp_by_name) +item(tt(tcp_by_name))( +Associative array. The keys are the names of sessions; each value is the +file descriptor associated with that session. +) +enditem() + +texinode(TCP Examples)(TCP Bugs)(TCP Parameters)(TCP Function System) +sect(TCP Examples) + +Here is a trivial example using a remote calculator. + +TO create a calculator server on port 7337 (see the tt(dc) manual page for +quite how infuriating the underlying command is): + +example(tcp_proxy 7337 dc) + +To connect to this from the same host with a session also named `tt(dc)': + +example(tcp_open localhost 7337 dc) + +To send a command to the remote session and wait a short while for output +(assuming tt(dc) is the current session): + +example(tcp_command 2 4 + p) + +To close the session: + +example(tcp_close) + +The tt(tcp_proxy) needs to be killed to be stopped. Note this will not +usually kill any connections which have already been accepted, and also +that the port is not immediately available for reuse. + +The following chunk of code puts a list of sessions into an xterm header, +with the current session followed by a star. + +example(print -n "\033]2;TCP:" ${(k)tcp_by_name:/$TCP_SESS/$TCP_SESS\*} "\a") + +texinode(TCP Bugs)()(TCP Examples)(TCP Function System) +sect(TCP Bugs) + +The function tt(tcp_read) uses the shell's normal tt(read) builtin. As +this reads a complete line at once, data arriving without a terminating +newline can cause the function to block indefinitely. + +Though the function suite works well for interactive use and for data +arriving in small amounts, the performance when large amounts of data are +being exchanged is likely to be extremely poor. diff --git a/Doc/Zsh/zftpsys.yo b/Doc/Zsh/zftpsys.yo index b8ffa562b..95cb6f5d2 100644 --- a/Doc/Zsh/zftpsys.yo +++ b/Doc/Zsh/zftpsys.yo @@ -1,4 +1,4 @@ -texinode(Zftp Function System)(User Contributions)(Zsh Modules)(Top) +texinode(Zftp Function System)(User Contributions)(TCP Function System)(Top) chapter(Zftp Function System) cindex(zftp function system) cindex(FTP, functions for using shell as client) diff --git a/Doc/zsh.yo b/Doc/zsh.yo index e6bf38310..5258555a8 100644 --- a/Doc/zsh.yo +++ b/Doc/zsh.yo @@ -63,6 +63,7 @@ ifnzman(includefile(Zsh/compwid.yo)) ifnzman(includefile(Zsh/compsys.yo)) ifnzman(includefile(Zsh/compctl.yo)) ifnzman(includefile(Zsh/modules.yo)) +ifnzman(includefile(Zsh/tcpsys.yo)) ifnzman(includefile(Zsh/zftpsys.yo)) ifnzman(includefile(Zsh/contrib.yo)) ifzshall(\ @@ -78,6 +79,7 @@ source(zshcompwid) source(zshcompsys) source(zshcompctl) source(zshmodules) +source(zshtcpsys) source(zshzftpsys) source(zshcontrib) manpage(ZSHALL)(1)(date())(zsh version()) diff --git a/Doc/zshtcpsys.yo b/Doc/zshtcpsys.yo new file mode 100644 index 000000000..52cd86153 --- /dev/null +++ b/Doc/zshtcpsys.yo @@ -0,0 +1,3 @@ +manpage(ZSHTCPSYS)(1)(date())(zsh version()) +manpagename(zshtcpsys)(zsh tcpletion system) +includefile(Zsh/tcpsys.yo) -- cgit 1.4.1