From 09b09770d9d66a655343c3266b717973802a0ebc Mon Sep 17 00:00:00 2001 From: Bart Schaefer Date: Thu, 4 May 2000 06:21:18 +0000 Subject: 11136: Reorganize history expansion doc. --- Doc/Zsh/expn.yo | 193 +++++++++++++++++++++++++++++++------------------------- 1 file changed, 108 insertions(+), 85 deletions(-) (limited to 'Doc') diff --git a/Doc/Zsh/expn.yo b/Doc/Zsh/expn.yo index c0a58690a..ae81c1bb6 100644 --- a/Doc/Zsh/expn.yo +++ b/Doc/Zsh/expn.yo @@ -49,36 +49,91 @@ cindex(expansion, history) History expansion allows you to use words from previous command lines in the command line you are typing. This simplifies spelling corrections and the repetition of complicated commands or arguments. -Command lines are saved in the history list, the size of which -is controlled by the tt(HISTSIZE) vindex(HISTSIZE, use of) -parameter. The most recent command is retained in any case. -A history expansion begins with the first character of the -tt(histchars) parameter which is `tt(!)' -by default and may occur anywhere on the command line; history -expansions do not nest. The `tt(!)' can be escaped with `tt(\)' -or can be enclosed between a pair of single quotes (tt('')) to suppress -its special meaning. Double quotes will em(not) work for this. - -Input lines containing history expansions are echoed on the -terminal after being expanded, but before any other -expansions take place or the command gets executed. +Immediately before execution, each command is saved in the history list, +the size of which is controlled by the tt(HISTSIZE) parameter. The one +most recent command is always retained in any case. Each saved command in +the history list is called a history em(event) and is assigned a number, +beginning with 1 (one) when the shell starts up. The history number that +you may see in your prompt (see noderef(Prompt Expansion)) is the number +that is to be assigned to the em(next) command. + startmenu() +menu(Overview) menu(Event Designators) menu(Word Designators) menu(Modifiers) endmenu() -texinode(Event Designators)(Word Designators)()(History Expansion) +texinode(Overview)(Event Designators)()(History Expansion) +subsect(Overview) +vindex(histchars, use of) +A history expansion begins with the first character of the tt(histchars) +parameter, which is `tt(!)' by default, and may occur anywhere on the +command line; history expansions do not nest. The `tt(!)' can be escaped +with `tt(\)' or can be enclosed between a pair of single quotes (tt('')) +to suppress its special meaning. Double quotes will em(not) work for +this. Following this history character is an optional event designator +(ifzman(see )noderef(Event Designators)) and then an optional word +designator (noderef(Word Designators)); if neither of these designators is +present, no history expansion occurs. + +Input lines containing history expansions are echoed after being expanded, +but before any other expansions take place and before the command is +executed. It is this expanded form that is recorded as the history event +for later references. + +By default, a history reference with no event designator refers to the +same event as any preceding history reference on that command line; if it +is the only history reference in a command, it refers to the previous +command. +pindex(CSH_JUNKIE_HISTORY, use of) +However, if the option tt(CSH_JUNKIE_HISTORY) is set, then every history +reference with no event specification em(always) refers to the previous +command. + +For example, `tt(!)' is the event designator for the previous command, so +`tt(!!:1)' always refers to the first word of the previous command, and +`tt(!!$)' always refers to the last word of the previous command. With +tt(CSH_JUNKIE_HISTORY) set, then `tt(!:1)' and `tt(!$)' function in the +same manner as `tt(!!:1)' and `tt(!!$)', respectively. Conversely, if +tt(CSH_JUNKIE_HISTORY) is unset, then `tt(!:1)' and `tt(!$)' refer to the +first and last words, respectively, of the same event referenced by the +nearest other history reference preceding them on the current command +line, or to the previous command if there is no preceding reference. + +The character sequence `tt(^)var(foo)tt(^)var(bar)' (where `tt(^)' is +actually the second charcter of the tt(histchars) parameter) +repeats the last command, replacing the string var(foo) with var(bar). +More precisely, the sequence `tt(^)var(foo)tt(^)var(bar)tt(^)' is +synonymous with `tt(!!:s)tt(^)var(foo)tt(^)var(bar)tt(^)', hence other +modifiers (see noderef(Modifiers)) may follow the final `tt(^)'. + +If the shell encounters the character sequence `tt(!")' +in the input, the history mechanism is temporarily disabled until +the current list (see +ifzman(manref(zshmisc))\ +ifnzman(noderef(Shell Grammar))\ +) is fully parsed. The `tt(!")' is removed from the input, and any +subsequent `tt(!)' characters have no special significance. + +findex(fc, use of) +A less convenient but more comprehensible form of command history support +is provided by the tt(fc) builtin. +texinode(Event Designators)(Word Designators)(Overview)(History Expansion) subsect(Event Designators) cindex(history event designators) cindex(event designators, history) -An event designator is a reference to a command-line entry in -the history list. +An event designator is a reference to a command-line entry in the history +list. In the list below, remember that the initial tt(`!') in each item +may be changed to another character by setting the tt(histchars) +parameter. startitem() item(tt(!))( Start a history expansion, except when followed by a blank, newline, -`tt(=)' or `tt(LPAR())'. +`tt(=)' or `tt(LPAR())'. If followed immediately by a word designator +(ifzman(see )noderef(Word Designators)), this forms a history reference +with no event designator (ifzman(see )noderef(Overview)). ) item(tt(!!))( Refer to the previous command. @@ -95,7 +150,9 @@ item(tt(!)var(str))( Refer to the most recent command starting with var(str). ) item(tt(!?)var(str)[tt(?)])( -Refer to the most recent command containing var(str). +Refer to the most recent command containing var(str). The trailing +`tt(?)' is necessary if this reference is to be followed by a modifier or +followed by any text that is not to be considered part of var(str). ) item(tt(!#))( Refer to the current command line typed in so far. The line is @@ -110,10 +167,10 @@ texinode(Word Designators)(Modifiers)(Event Designators)(History Expansion) subsect(Word Designators) cindex(history word designators) cindex(word designators, history) -A word designator indicates which word or words of a given command line will -be included in a history reference. A `tt(:)' +A word designator indicates which word or words of a given command line are +to be included in a history reference. A `tt(:)' usually separates the event specification from the word designator. -It can be omitted if the word designator begins with a +It may be omitted only if the word designator begins with a `tt(^)', `tt($)', `tt(*)', `tt(-)' or `tt(%)'. Word designators include: @@ -129,9 +186,9 @@ sitem(var(x)tt(*))(Abbreviates `var(x)tt(-$)'.) sitem(var(x)tt(-))(Like `var(x)tt(*)' but omitting word tt($).) endsitem() -Note that a `tt(%)' word designator will only work when used as -`tt(!%)', `tt(!:%)' or `tt(!?)var(str)tt(?:%)', -and only when used after a tt(!?) expansion. Anything else will result +Note that a `tt(%)' word designator works only when used in one of +`tt(!%)', `tt(!:%)' or `tt(!?)var(str)tt(?:%)', and only when used after a +tt(!?) expansion (possibly in an earlier command). Anything else results in an error, although the error may not be the most obvious one. texinode(Modifiers)()(Word Designators)(History Expansion) subsect(Modifiers) @@ -179,30 +236,6 @@ Convert the words to all lowercase. item(tt(u))( Convert the words to all uppercase. ) -item(tt(f))( -(This and the following -tt(F), tt(w) and tt(W) modifier only work with parameter expansion and -filename generation.) -Repeats the immediately (without a colon) following modifier until the -resulting word doesn't change any more. -) -item(tt(F:)var(expr)tt(:))( -Like tt(f), but repeats only var(n) times if the expression -var(expr) evaluates to var(n). Any character can be used instead of -the `tt(:)'; if `tt(LPAR())', `tt([)', or `tt({)' -is used as the opening delimiter, -the closing delimiter should be 'tt(RPAR())', `tt(])', or `tt(})', -respectively. -) -item(tt(w))( -Makes the immediately following modifier work on each word in the -string. -) -item(tt(W:)var(sep)tt(:))( -Like tt(w) but words are considered to be the parts of the string -that are separated by var(sep). Any character can be used instead of -the `tt(:)'; opening parentheses are handled specially, see above. -) item(tt(s/)var(l)tt(/)var(r)[tt(/)])( Substitute var(r) for var(l) as described below. Unless preceded immediately by a tt(g), with no colon between, @@ -231,43 +264,33 @@ the rightmost `tt(?)' in a context scan can similarly be omitted. Note the same record of the last var(l) and var(r) is maintained across all forms of expansion. -By default, a history reference with no event specification refers to the same -line as the previous history reference on that command line, unless it is the -first history reference in a command. In that case, a history reference -with no event specification always refers to the previous command. However, -if the option tt(CSH_JUNKIE_HISTORY) is set, -pindex(CSH_JUNKIE_HISTORY, use of) -then history reference with no -event specification will em(always) refer to the previous command. - -For example, `tt(!!:1)' -will always refer to the first word of the previous command, and `tt(!!$)' -will always refer to the last word of the previous command. And with -tt(CSH_JUNKIE_HISTORY) set, then `tt(!:1)' and `tt(!$)' -will function in the same manner as `tt(!!:1)' and `tt(!!$)', -respectively. However, if tt(CSH_JUNKIE_HISTORY) is unset, then -`tt(!:1)' and `tt(!$)' -will refer to the first and last words respectively, of the last command -referenced on the current command line. However, if they are the first history -reference on the command line, then they refer to the previous command. - -The character sequence `tt(^)var(foo)tt(^)var(bar)' (where `tt(^)' is -actually the second charcter of the tt(histchars) parameter) -repeats the last command, replacing the string var(foo) with var(bar). -More precisely, the sequence `tt(^)var(foo)tt(^)var(bar)tt(^)' is -synonymous with `tt(!!:s)tt(^)var(foo)tt(^)var(bar)tt(^)', hence other -modifiers may follow the final `tt(^)'. - -If the shell encounters the character sequence `tt(!")' -in the input, the history mechanism is temporarily disabled until -the current list is fully parsed. The `tt(!")' -is removed from the input, and any subsequent `tt(!)' -characters have no special significance. +The following tt(f), tt(F), tt(w) and tt(W) modifiers work only with +parameter expansion and filename generation. They are listed here to +provide a single point of reference for all modifiers. -A less convenient but more comprehensible -form of command history support -is provided by the tt(fc) builtin. -findex(fc, use of) +startitem() +item(tt(f))( +Repeats the immediately (without a colon) following modifier until the +resulting word doesn't change any more. +) +item(tt(F:)var(expr)tt(:))( +Like tt(f), but repeats only var(n) times if the expression +var(expr) evaluates to var(n). Any character can be used instead of +the `tt(:)'; if `tt(LPAR())', `tt([)', or `tt({)' +is used as the opening delimiter, +the closing delimiter should be 'tt(RPAR())', `tt(])', or `tt(})', +respectively. +) +item(tt(w))( +Makes the immediately following modifier work on each word in the +string. +) +item(tt(W:)var(sep)tt(:))( +Like tt(w) but words are considered to be the parts of the string +that are separated by var(sep). Any character can be used instead of +the `tt(:)'; opening parentheses are handled specially, see above. +) +enditem() texinode(Process Substitution)(Parameter Expansion)(History Expansion)(Expansion) sect(Process Substitution) cindex(process substitution) @@ -277,7 +300,7 @@ Each command argument of the form `tt(>LPAR())var(list)tt(RPAR())' or `tt(=LPAR())var(list)tt(RPAR())' is subject to process substitution. -In the case of the tt(<) or tt(>) forms, the shell will run process +In the case of the tt(<) or tt(>) forms, the shell runs process var(list) asynchronously. If the system supports the tt(/dev/fd) mechanism, the command argument is the name of the device file corresponding to a file descriptor; otherwise, if the system supports named -- cgit 1.4.1