diff options
Diffstat (limited to 'Doc')
-rw-r--r-- | Doc/Zsh/contrib.yo | 236 | ||||
-rw-r--r-- | Doc/zmacros.yo | 1 |
2 files changed, 142 insertions, 95 deletions
diff --git a/Doc/Zsh/contrib.yo b/Doc/Zsh/contrib.yo index 4fce28412..a2884c4c9 100644 --- a/Doc/Zsh/contrib.yo +++ b/Doc/Zsh/contrib.yo @@ -660,25 +660,23 @@ This works only with the new function based completion system. example(bindkey '^Xi' incremental-complete-word) ) -tindex(insert-files) -item(tt(insert-files))( -This function allows you type a file pattern, and see the results of the -expansion at each step. When you hit return, all expansions are inserted -into the command line. - -example(bindkey '^Xf' insert-files) -) -tindex(insert-unicode-char) -item(tt(insert-unicode-char))( -This function allows you to compose Unicode characters to be inserted -into the command line. The command is followed by two keys (there is -no prompt), of which the first indicates the type of accent or special -character, and the second indicates the base character. Both input -characters are always from the ASCII character set. For best results -zsh should have been built with support for multibyte characters -(configured with tt(--enable-multibyte)). - -The character is converted from Unicode into the local representation and +tindex(insert-composed-char) +item(tt(insert-composed-char))( +This function allows you to compose characters that don't appear on the +keyboard to be inserted into the command line. The command is followed by +two keys corresponding to ASCII characters (there is no prompt). For +accented characters, the two keys are a base character followed by a code +for the accent, while for other special characters the two characters +together form a mnemonic for the character to be inserted. The +two-character codes are a subset of those given by RFC 1345 (see for +example tt(http://www.faqs.org/rfcs/rfc1345.html)). + +For best results zsh should have been built with support for multibyte +characters (configured with tt(--enable-multibyte)); however, the function +works for the limited range of characters available in single-byte +character sets such as ISO-8859-1. + +The character is converted into the local representation and inserted into the command line at the cursor position. (The conversion is done within the shell, using whatever facilities the C library provides.) With a numeric argument, the character and its @@ -688,91 +686,139 @@ The function may be run outside zle in which case it prints the character (together with a newline) to standard output. Input is still read from keystrokes. -The set of accented characters is reasonably complete up to U+0180, the -set of special characters less so. However, it mostly gives up at that -point. Adding new Unicode characters is easy, however. Please send any -additions to tt(zsh-workers@sunsite.dk). +The set of accented characters is reasonably complete up to Unicode +character U+0180, the set of special characters less so. However, it +mostly gives up at that point. Adding new characters is easy, however. +Please send any additions to tt(zsh-workers@sunsite.dk). -The codes for the first character are as follows: +The codes for the second character when used to accent the first are as +follows. Note that not every character can take every accent. startsitem() -sitem(tt(`))( -Grave accent. -) -sitem(tt('))( -Acute accent. -) -sitem(tt(d))( -Double acute accent (only supported on a few letters). -) -sitem(tt(^))( -Circumflex. -) -sitem(tt(~))( -Tilde. -) -sitem(tt("))( -Diaeresis (Umlaut). -) -sitem(tt(o))( -Circle over the base character. -) -sitem(tt(e))( -Ligatures ending in e or E: tt(e A) gives AE, tt(e o) gives oe, etc. -) -sitem(tt(j))( -Ligatures ending in j or J: ij or IJ. -) -sitem(tt(c))( -Cedilla. +sitem(tt(!))(Grave.) +sitem(tt(RQUOTE()))(Acute.) +sitem(tt(>))(Circumflex.) +sitem(tt(?))(Tilde. (This is not tt(~) as RFC 1345 does not assume that +character is present on the keyboard.)) +sitem(tt(-))(Macron. (A horizonal bar over the base character.)) +sitem(tt(LPAR()))(Breve. (A shallow dish shape over the base character.)) +sitem(tt(.))(Dot above the base character, or in the case of tt(i) no dot, +or in the case of tt(L) and tt(l) a centered dot.) +sitem(tt(:))(Diaeresis (Umlaut).) +sitem(tt(c))(Cedilla.) +sitem(tt(_))(Underline, however there are currently no underlined characters.) +sitem(tt(/))(Stroke through the base character.) +sitem(tt("))(Double acute (only supported on a few letters).) +sitem(tt(;))(Ogonek. (A little forward facing hook at the bottom right +of the character. The "g" stands for "Ogonek" but another +mnemonic is that g has a squiggle below the line.)) +sitem(tt(<))(Caron. (A little v over the letter.)) +sitem(tt(0))(Circle over the base character.) +sitem(tt(2))(Hook over the base character.) +sitem(tt(9))(Horn over the base character.) +endsitem() + +The following other two-character sequences are understood. + +startitem() +item(ASCII characters)( +These are already present on most keyboards: +startsitem() +sitem(tt(<LPAR()))(Left square bracket) +sitem(tt(//))(Backslash (solidus)) +sitem(tt(RPAR()>))(Right square bracket) +sitem(tt(LPAR()!))(Left brace (curly bracket)) +sitem(tt(!!))(Vertical bar (pipe symbol)) +sitem(tt(!RPAR()))(Right brace (curly bracket)) +sitem(tt(RQUOTE()?))(Tilde) +endsitem() ) -sitem(tt(/))( -Stroke through the base character. +item(Special letters)( +Characters found in various variants of the Latin alphabet: +startsitem() +sitem(tt(ss))(Eszett (scafes S)) +sitem(tt(D-), tt(d-))(Eth) +sitem(tt(TH), tt(th))(Thorn) +sitem(tt(kk))(Kra) +sitem(tt(RQUOTE()n))(RQUOTE()n) +sitem(tt(NG), tt(ng))(Ng) +sitem(tt(OI), tt(oi))(Oi) +sitem(tt(yr))(yr) +sitem(tt(ED))(ezh) +endsitem() ) -sitem(tt(-))( -Macron. (A horizonal bar over the base character.) +item(Currency symbols)( +startsitem() +sitem(tt(Ct))(Cent) +sitem(tt(Pd))(Pound sterling (also lira and others)) +sitem(tt(Cu))(Currency) +sitem(tt(Ye))(Yen) +sitem(tt(Eu))(Euro (N.B. not in RFC 1345)) +endsitem() ) -sitem(tt(u))( -Breve. (A shallow dish shape over the base character.) +item(Punctuation characters)( +References to "right" quotes indicate the shape (like a 9 rather than 6) +rather than their grammatical use. (For example, a "right" low double +quote is used to open quotations in German.) +startsitem() +sitem(tt(!I))(Inverted exclamation mark) +sitem(tt(BB))(Broken vertical bar) +sitem(tt(SE))(Section) +sitem(tt(Co))(Copyright) +sitem(tt(-a))(Spanish feminine ordinal indicator) +sitem(tt(<<))(Left guillemet) +sitem(tt(--))(Soft hyphen) +sitem(tt(Rg))(Registered trade mark) +sitem(tt(PI))(Pilcrow (paragraph)) +sitem(tt(-o))(Spanish masculine ordinal indicator) +sitem(tt(>>))(Right guillemet) +sitem(tt(?I))(Inverted question mark) +sitem(tt(RQUOTE()6))(Left single quote) +sitem(tt(RQUOTE()9))(Right single quote) +sitem(tt(.9))("Right" low quote) +sitem(tt(9+RQUOTE()))(Reversed "right" quote) +sitem(tt("6))(Left double quote) +sitem(tt("9))(Right double quote) +sitem(tt(:9))("Right" low double quote) +sitem(tt(9"))(Reversed "right" double quote) +sitem(tt(/-))(Dagger) +sitem(tt(/=))(Double dagger) +endsitem() ) -sitem(tt(.))( -Dot above the base character +item(Mathematical symbols)( +startsitem() +sitem(tt(DG))(Degree) +sitem(tt(+-))(+/- sign) +sitem(tt(2S))(Superscript 2) +sitem(tt(3S))(Superscript 3) +sitem(tt(1S))(Superscript 1) +sitem(tt(My))(Micro) +sitem(tt(.M))(Middle dot) +sitem(tt(14))(Quarter) +sitem(tt(12))(Half) +sitem(tt(34))(Three quarters) +sitem(tt(*X))(Multiplication) +sitem(tt(-:))(Division) +endsitem() ) -sitem(tt(:))( -A dot in the middle plane of the base character +item(Accents on their own)( +startsitem() +sitem(tt(RQUOTE()>))(Circumflex (same as caret, tt(^))) +sitem(tt(RQUOTE()!))(Grave (same as backtick, tt(`))) +sitem(tt(RQUOTE(),))(Cedilla) +sitem(tt(RQUOTE():))(Diaeresis (Umlaut)) +sitem(tt(RQUOTE()m))(Macron) +sitem(tt(RQUOTE()RQUOTE()))(Acute) +endsitem() ) -sitem(tt(g))( -Ogonek. (A little forward facing hook at the bottom right -of the character. The "g" stands for "Ogonek" but another -mnemonic is that g has a squiggle below the line.) -) -sitem(tt(v))( -Caron. (A little v over the letter.) -) -sitem(tt(s))( -Used only as tt(s s), a german Eszett or "scharfes S" ligature. -) -sitem(tt(h))( -Icelandic (or Runic) edh (tt(h d)) or thorn (tt(h t)). -) -sitem(tt(m))( -Various mathematical characters: not (tt(m \)), multiply (tt(m *)), divide -(tt(m /)), degree (tt(m o)), +/- (tt(m +)), superscripts 1, 2, 3 (tt(m 1), -etc.), micro (tt(m u)), quarter (tt(m q)), half (tt(m h)), three quarters -(tt(m t)). -) -sitem(tt(p))( -Various punctuation and currency characters (any non-mathematical symbol -that is not part of a word): soft space (tt(p _)), inverted ! (tt(p !)), -cent (tt(p %)), pound sign (tt(p l)) (think lira, librum), currency (tt(p -$)), yen (tt(p y)), broken bar (tt(p |)), section sign (tt(p s)), lonely -diaeresis (tt(p ")), copyright sign (tt(p C)), Spanish feminine marker -(tt(p f)), left guillemet (tt(p <)), soft hyphen (tt(p h)), registered -trade mark (tt(p R)), lonely macron (tt(p -)), lonely acute (tt(p ')), -Pilcrow (paragraph) sign (tt(p p)), middle dot (tt(p :)), -lonely cedilla (tt(p c)), Spanish masculine marker (tt(p m)), right -guillemet (tt(p >)), inverted ? (tt(p ?)), Euro sign (tt(p e)). +enditem() ) -endsitem() +tindex(insert-files) +item(tt(insert-files))( +This function allows you type a file pattern, and see the results of the +expansion at each step. When you hit return, all expansions are inserted +into the command line. + +example(bindkey '^Xf' insert-files) ) tindex(narrow-to-region) tindex(narrow-to-region-invisible) diff --git a/Doc/zmacros.yo b/Doc/zmacros.yo index 882abf41a..1c3319059 100644 --- a/Doc/zmacros.yo +++ b/Doc/zmacros.yo @@ -17,6 +17,7 @@ DEFINEMACRO(redef)(3)(\ DEFINEMACRO(ARG1)(ARG2)(ARG3)\ ) +DEFINEMACRO(RQUOTE)(0)(CHAR(39)) DEFINEMACRO(LPAR)(0)(CHAR(40)) DEFINEMACRO(RPAR)(0)(CHAR(41)) DEFINEMACRO(PLUS)(0)(CHAR(43)) |