about summary refs log tree commit diff
path: root/Doc/Zsh
diff options
context:
space:
mode:
Diffstat (limited to 'Doc/Zsh')
-rw-r--r--Doc/Zsh/builtins.yo35
-rw-r--r--Doc/Zsh/contrib.yo22
-rw-r--r--Doc/Zsh/expn.yo26
3 files changed, 46 insertions, 37 deletions
diff --git a/Doc/Zsh/builtins.yo b/Doc/Zsh/builtins.yo
index 415bce613..ada69c99a 100644
--- a/Doc/Zsh/builtins.yo
+++ b/Doc/Zsh/builtins.yo
@@ -39,11 +39,11 @@ be familiar to most command line users.
 
 Typically, options are single letters preceded by a hyphen (tt(-)).
 Options that take an argument accept it either immediately following the
-option letter or after white space, for example `tt(print -C3 *)' or
-`tt(print -C 3 *)' are equivalent.  Arguments to options are not the
+option letter or after white space, for example `tt(print -C3 {1..9})' or
+`tt(print -C 3 {1..9})' are equivalent.  Arguments to options are not the
 same as arguments to the command; the documentation indicates which is
 which.  Options that do not take an argument may be combined in a single
-word, for example `tt(print -ca *)' and `tt(print -c -a *)' are
+word, for example `tt(print -rca -- *)' and `tt(print -r -c -a -- *)' are
 equivalent.
 
 Some shell builtin commands also take options that begin with `tt(+)'
@@ -54,14 +54,14 @@ Options (together with their individual arguments, if any) must appear
 in a group before any non-option arguments; once the first non-option
 argument has been found, option processing is terminated.
 
-All builtin commands other than precommand modifiers, even those that
-have no options, can be given the argument `tt(-)tt(-)' to terminate option
-processing.  This indicates that the following words are non-option
-arguments, but is otherwise ignored.  This is useful in cases where
-arguments to the command may begin with `tt(-)'.  For historical
-reasons, most builtin commands also recognize a single `tt(-)' in a
-separate word for this purpose; note that this is less standard and
-use of `tt(-)tt(-)' is recommended.
+All builtin commands other than `tt(echo)' and precommand modifiers,
+even those that have no options, can be given the argument `tt(-)tt(-)'
+to terminate option processing.  This indicates that the following words
+are non-option arguments, but is otherwise ignored.  This is useful in
+cases where arguments to the command may begin with `tt(-)'.  For
+historical reasons, most builtin commands (including `tt(echo)') also
+recognize a single `tt(-)' in a separate word for this purpose; note
+that this is less standard and use of `tt(-)tt(-)' is recommended.
 
 startitem()
 prefix(-)
@@ -114,9 +114,9 @@ var(text) is any non-empty string, it is replaced by the text
 a literal string, not a pattern.  A trailing space in var(value) is not
 special in this case.  For example,
 
-example(alias -s ps=gv)
+example(alias -s ps='gv --')
 
-will cause the command `tt(*.ps)' to be expanded to `tt(gv *.ps)'.  As
+will cause the command `tt(*.ps)' to be expanded to `tt(gv -- *.ps)'.  As
 alias expansion is carried out earlier than globbing, the `tt(*.ps)' will
 then be expanded.  Suffix aliases constitute a different name space from
 other aliases (so in the above example it is still possible
@@ -1258,7 +1258,10 @@ If given together with tt(-o) or tt(-O), sorting is performed
 case-independently.
 )
 item(tt(-l))(
-Print the arguments separated by newlines instead of spaces.
+Print the arguments separated by newlines instead of spaces.  Note: if
+the list of arguments is empty, tt(print -l) will still output one empty
+line. To print a possibly-empty list of arguments one per line, use
+tt(print -C1), as in `tt(print -rC1 -- "$list[@]")'.
 )
 item(tt(-m))(
 Take the first argument as a pattern (should be quoted), and remove
@@ -1269,7 +1272,9 @@ item(tt(-n))(
 Do not add a newline to the output.
 )
 item(tt(-N))(
-Print the arguments separated and terminated by nulls.
+Print the arguments separated and terminated by nulls. Again,
+tt(print -rNC1 -- "$list[@]") is a canonical way to print an
+arbitrary list as null-delimited records.
 )
 item(tt(-o))(
 Print the arguments sorted in ascending order.
diff --git a/Doc/Zsh/contrib.yo b/Doc/Zsh/contrib.yo
index 558342711..011a75c77 100644
--- a/Doc/Zsh/contrib.yo
+++ b/Doc/Zsh/contrib.yo
@@ -4418,24 +4418,28 @@ the elements from the tt(input) list in each run.  If no var(command) is
 provided, then no var(arg) list may be provided, and in that event the
 default command is `tt(print)' with arguments `tt(-r -)tt(-)'.
 
-For example, to get a long tt(ls) listing of all plain files in the
-current directory or its subdirectories:
+For example, to get a long tt(ls) listing of all non-hidden plain files
+in the current directory or its subdirectories:
 
 example(autoload -U zargs
-zargs -- **/*(.) -- ls -l)
+zargs -- **/*(.) -- ls -ld --)
 
-Note that `tt(-)tt(-)' is used both to mark the end of the var(option)
-list and to mark the end of the var(input) list, so it must appear twice
-whenever the var(input) list may be empty.  If there is guaranteed to be
-at least one var(input) and the first var(input) does not begin with a
-`tt(-)', then the first `tt(-)tt(-)' may be omitted.
+The first and third occurrences of `tt(-)tt(-)' are used to mark the end
+of options for tt(zargs) and tt(ls) respectively to guard against
+filenames starting with `tt(-)', while the second is used to separate the
+list of files from the command to run (`tt(ls -ld --)').
+
+The first `tt(-)tt(-)' would also be needed if there was a chance the
+list might be empty as in:
+
+example(zargs -r -- ./*.back(#qN) -- rm -f)
 
 In the event that the string `tt(-)tt(-)' is or may be an var(input), the
 tt(-e) option may be used to change the end-of-inputs marker.  Note that
 this does em(not) change the end-of-options marker.  For example, to use
 `tt(..)' as the marker:
 
-example(zargs -e.. -- **/*(.) .. ls -l)
+example(zargs -e.. -- **/*(.) .. ls -ld --)
 
 This is a good choice in that example because no plain file can be named
 `tt(..)', but the best end-marker depends on the circumstances.
diff --git a/Doc/Zsh/expn.yo b/Doc/Zsh/expn.yo
index 049386cab..9451fa605 100644
--- a/Doc/Zsh/expn.yo
+++ b/Doc/Zsh/expn.yo
@@ -400,7 +400,7 @@ backslashes.
 For example, the following piece of filename generation code
 with the tt(EXTENDED_GLOB) option:
 
-example(print *.c+LPAR()#q:s/#%+LPAR()#b+RPAR()s+LPAR()*+RPAR().c/'S${match[1]}.C'/+RPAR())
+example(print -r -- *.c+LPAR()#q:s/#%+LPAR()#b+RPAR()s+LPAR()*+RPAR().c/'S${match[1]}.C'/+RPAR())
 
 takes the expansion of tt(*.c) and applies the glob qualifiers in the
 tt(LPAR()#q)var(...)tt(RPAR()) expression, which consists of a substitution
@@ -2522,11 +2522,11 @@ therefore matches files in the current directory as well as
 subdirectories.
 Thus:
 
-example(ls (*/)#bar)
+example(ls -ld -- (*/)#bar)
 
 or
 
-example(ls **/bar)
+example(ls -ld -- **/bar)
 
 does a recursive directory search for files named `tt(bar)' (potentially
 including the file `tt(bar)' in the current directory).  This form does not
@@ -2541,11 +2541,11 @@ they are treated as if both a tt(/) plus a further tt(*) are present.
 Hence:
 
 example(setopt GLOBSTARSHORT
-ls **.c)
+ls -ld -- **.c)
 
 is equivalent to
 
-example(ls **/*.c)
+example(ls -ld -- **/*.c)
 subsect(Glob Qualifiers)
 cindex(globbing, qualifiers)
 cindex(qualifiers, globbing)
@@ -2737,7 +2737,7 @@ appropriate test.  For example,
 
 example(nt+LPAR()RPAR() { [[ $REPLY -nt $NTREF ]] }
 NTREF=reffile
-ls -l *(+nt))
+ls -ld -- *(+nt))
 
 lists all files in the directory that have been modified more recently than
 tt(reffile).
@@ -2928,36 +2928,36 @@ is performed, although note that the presence of the parentheses
 causes the entire expression to be subjected to any global pattern matching
 options such as tt(NULL_GLOB). Thus:
 
-example(ls *(-/))
+example(ls -ld -- *(-/))
 
 lists all directories and symbolic links that point to directories,
 and
 
-example(ls *(-@))
+example(ls -ld -- *(-@))
 
 lists all broken symbolic links, and
 
-example(ls *(%W))
+example(ls -ld -- *(%W))
 
 lists all world-writable device files in the current directory, and
 
-example(ls *(W,X))
+example(ls -ld -- *(W,X))
 
 lists all files in the current directory that are
 world-writable or world-executable, and
 
-example(echo /tmp/foo*(u0^@:t))
+example(print -rC1 /tmp/foo*(u0^@:t))
 
 outputs the basename of all root-owned files beginning with the string
 `tt(foo)' in tt(/tmp), ignoring symlinks, and
 
-example(ls *.*~(lex|parse).[ch](^D^l1))
+example(ls -ld -- *.*~(lex|parse).[ch](^D^l1))
 
 lists all files having a link count of one whose names contain a dot
 (but not those starting with a dot, since tt(GLOB_DOTS) is explicitly
 switched off) except for tt(lex.c), tt(lex.h), tt(parse.c) and tt(parse.h).
 
-example(print b*.pro+LPAR()#q:s/pro/shmo/+RPAR()(#q.:s/builtin/shmiltin/))
+example(print -rC1 b*.pro+LPAR()#q:s/pro/shmo/+RPAR()(#q.:s/builtin/shmiltin/))
 
 demonstrates how colon modifiers and other qualifiers may be chained
 together.  The ordinary qualifier `tt(.)' is applied first, then the colon