diff options
Diffstat (limited to 'Completion')
| -rw-r--r-- | Completion/Unix/Command/_rsync | 286 |
1 files changed, 145 insertions, 141 deletions
diff --git a/Completion/Unix/Command/_rsync b/Completion/Unix/Command/_rsync index cdb40ab46..b999c1bbd 100644 --- a/Completion/Unix/Command/_rsync +++ b/Completion/Unix/Command/_rsync @@ -96,144 +96,148 @@ _rsync_files() { _alternative "files:file:_files" "remote-files:remote file:_rsync_remote_files" } -_arguments -s \ - '*'{-v,--verbose}'[increase verbosity]' \ - {--no-v,--no-verbose}'[turn off --verbose]' \ - '--bwlimit=[limit I/O bandwidth]:KBytes per second' \ - '--port=[specify alternate port number]:port:(873)' \ - '--address=[bind to the specified address]:bind address:_bind_addresses' \ - '(-T --temp-dir)'{-T,--temp-dir=}'[create temporary files in specified directory]:directory:_directories' \ - '--sockopts=[specify custom TCP options]' \ - '(-4 -6 --ipv4 --ipv6)'{-4,--ipv4}'[prefer IPv4]' \ - '(-4 -6 --ipv4 --ipv6)'{-6,--ipv6}'[prefer IPv6]' \ - - daemon \ - '(-)'{-h,--help}'[display help information]' \ - '--config=[specify alternate rsyncd.conf file]:file:_files' \ - '--daemon[run as an rsync daemon]' \ - '--detach[detach from the parent]' \ - '--no-detach[do not detach from the parent]' \ - - client \ - '(-)--help[display help information]' \ - '*: :_rsync_files' \ - '(-q --quiet)'{-q,--quiet}'[suppress non-error messages]' \ - '--no-motd[suppress the daemon message-of-the-day output]' \ - '(-c --checksum)'{-c,--checksum}'[skip based on checksums, not mod-time & size]' \ - '(-a --archive)'{-a,--archive}'[archive mode; same as -rlptgoD (no -H)]' \ - '(-r --recursive)'{-r,--recursive}'[recurse into directories]' \ - {--no-r,--no-recursive}'[turn off --recursive]' \ - {--no-inc-recursive,--no-i-r}'[disable incremental recursive mode]' \ - '(-R --relative)'{-R,--relative}'[use relative path names]' \ - {--no-R,--no-relative}'[turn off --relative]' \ - {--no-implied-dirs,--no-i-d}'[do not send implied dirs with --relative]' \ - '(-b --backup)'{-b,--backup}'[make backups into hierarchy at indicated directory]' \ - '--backup-dir=[make backups into specified directory]:backup directory:_directories' \ - '--suffix=[set backup suffix]:suffix:(\~)' \ - '(-u --update)'{-u,--update}'[skip files that are newer on the receiving side]' \ - '--inplace[update destination files in-place]' \ - '(--append-verify)--append[append data onto shorter files]' \ - '(--append)--append-verify[append data onto shorter files, verifying old data]' \ - '(-A --acls)'{-A,--acls}'[preserve access-control lists]' \ - '(-X --xattrs)'{-X,--xattrs}'[preserve extended attributes]' \ - '--fake-super[use xattrs to save all file attributes]' \ - '(-d --dirs)'{-d,--dirs}'[transfer directories without recursing]' \ - {--no-d,--no-dirs}'[turn off --dirs]' \ - '(-l --links)'{-l,--links}'[copy symlinks as symlinks]' \ - {--no-l,--no-links}'[turn off --links]' \ - '(-L --copy-links)'{-L,--copy-links}'[transform symlinks into referent file/dir]' \ - '(-k --copy-dirlinks)'{-k,--copy-dirlinks}'[transform a symlink to a dir into referent dir]' \ - '--copy-unsafe-links[only "unsafe" symlinks are transformed]' \ - '--safe-links[ignore symlinks that point outside the source tree]' \ - '(-H --hard-links)'{-H,--hard-links}'[preserve hard links]' \ - {--no-H,--no-hard-links}'[turn off --hard-links]' \ - '(-K --keep-dirlinks)'{-K,--keep-dirlinks}'[treat symlinked dir on receiver as dir]' \ - '(-p --perms -E --executability)'{-p,--perms}'[preserve permissions]' \ - {--no-p,--no-perms}'[turn off --perms]' \ - '(-E --executability)'{-E,--executability}'[preserve executability]' \ - '(-o --owner)'{-o,--owner}'[preserve owner]' \ - {--no-o,--no-owner}'[turn off --owner]' \ - '(-g --group)'{-g,--group}'[preserve group]' \ - {--no-g,--no-group}'[turn off --group]' \ - '(--devices --specials)-D[same as --devices --specials]' \ - '(-D)--devices[preserve devices]' \ - '--no-devices[turn off --devices]' \ - '(-D)--specials[preserve special files]' \ - '--no-specials[turn off --specials]' \ - '--no-D[turn off --devices and --specials]' \ - '(-t --times)'{-t,--times}'[preserve times]' \ - {--no-t,--no-times}'[turn off --times]' \ - '(-O --omit-dir-times)'{-O,--omit-dir-times}'[omit directories when preserving times]' \ - '--chmod[change destination permissions]:mods' \ - '(-S --sparse)'{-S,--sparse}'[handle sparse files efficiently]' \ - '(-n --dry-run)'{-n,--dry-run}'[show what would have been transferred]' \ - '(-W --whole-file)'{-W,--whole-file}'[copy files whole (without delta-transfer algorithm)]' \ - {--no-W,--no-whole-file}'[turn off --whole-file]' \ - '(-x --one-file-system)'{-x,--one-file-system}'[do not cross filesystem boundaries]' \ - '(-B --block-size)'{-B,--block-size=}'[force a fixed checksum block-size]:block size' \ - '(-e --rsh)'{-e,--rsh=}'[specify the remote shell to use]:remote-shell command:(rsh ssh)' \ - '--rsync-path=[specify path to rsync on the remote machine]:remote command' \ - '--ignore-existing[ignore files that already exist on receiving side]' \ - '(--existing --ignore-non-existing)'{--existing,--ignore-non-existing}'[ignore files that do not exist on receiving side]' \ - '--remove-source-files[synchronized files are removed from sending side]' \ - '(--delete-before --delete-during --delete-after --delete-delay)--del[an alias for --delete-during]' \ - '--delete[delete files that do not exist on the sending side]' \ - '(--del --delete-during --delete-after --delete-delay)--delete-before[receiver deletes before transfer]' \ - '(--del --delete-before --delete-after --delete-delay)--delete-during[receiver deletes during transfer]' \ - '(--del --delete-before --delete-during --delete-delay)--delete-after[receiver deletes after transfer]' \ - '(--del --delete-before --delete-during --delete-after)--delete-delay[receiver deletes after transfer]' \ - '--delete-excluded[also delete excluded files on the receiving side]' \ - '--ignore-errors[delete even if there are I/O errors]' \ - '--force[force deletion of directories even if not empty]' \ - '--max-delete=[do not delete more than NUM files]:number' \ - '--max-size=[do not transfer any file larger than specified size]:number' \ - '--min-size=[do not transfer any file smaller than specified size]:number' \ - '(-P)--partial[keep partially transferred files]' \ - '--no-partial[turn off --partial]' \ - '--partial-dir=[put a partially transferred file into specified directory]:directory:_directories' \ - '--super[receiver attempts super-user activities]' \ - '--no-super[receiver performs normal-user activities]' \ - '--delay-updates[put all updated files into place at end of transfer]' \ - '(-m --prune-empty-dirs)'{-m,--prune-empty-dirs}'[prune empty directory chains from file-list]' \ - '--numeric-ids[do not map uid/gid values by user/group name]' \ - '--timeout=[set I/O timeout in seconds for lulls in a transfer]:seconds' \ - '--contimeout=[set connect timeout in seconds for daemon connections]:seconds' \ - '(-I --ignore-times)'{-I,--ignore-times}'[do not skip files that match in size and mod-time]' \ - '--size-only[skip files that match in size]' \ - '--modify-window=[compare mod-times with reduced accuracy]:seconds' \ - '(-y --fuzzy)'{-y,--fuzzy}'[find similar file for basis if no destination file]' \ - '(--copy-dest --link-dest)*--compare-dest=[also compare destination files relative to specified directory]:directory:_directories' \ - '(--compare-dest --link-dest)*--copy-dest=[like --compare-dest, but also includes copies of unchanged files]:directory:_directories' \ - '(--compare-dest --copy-dest)*--link-dest=[hardlink to files in specified directory hierarchy when unchanged]:directory:_directories' \ - '(-z --compress)'{-z,--compress}'[compress file data during the transfer]' \ - '--compress-level=[explicitly set compression level]:number' \ - '--skip-compress=[skip compressing files with a listed suffix]:suffixes' \ - '(-C --cvs-exclude)'{-C,--cvs-exclude}'[auto-ignore files the same way CVS does]' \ - '*'{-f=,--filter=}'[add a file-filtering rule]:rule' \ - '*-F[same as --filter="dir-merge /.rsync-filter", repeated: --filter="- .rsync-filter"]' \ - '--exclude-from=[read exclude patterns from specified file]:file:_files' \ - '*--exclude=[exclude files matching pattern]:pattern' \ - '--include-from=[read include patterns from specified file]:file:_files' \ - '*--include=[do not exclude files matching pattern]:pattern' \ - '--files-from=[read list of source-file names from specified file]:file:_files' \ - '(-0 --from0)'{-0,--from0}'[all *-from file lists are delimited by nulls]' \ - '(-s --protect-args)'{-s,--protect-args}'[no space-splitting; only wildcard special-chars]' \ - '--version[print version number]' \ - '*'{-h,--human-readable}'[output numbers in a human-readable format]' \ - '--blocking-io[use blocking I/O for the remote shell]' \ - '--no-blocking-io[turn off --blocking-io]' \ - '--stats[give some file-transfer stats]' \ - '(-8 --8-bit-output)'{-8,--8-bit-output}'[leave high-bit chars unescaped in output]' \ - '(-P)--progress[show progress during transfer]' \ - '--no-progress[turn off --progress]' \ - '(--partial --progress)-P[same as --partial --progress]' \ - '(-i --itemize-changes)'{-i,--itemize-changes}'[output a change-summary for all updates]' \ - '--log-format=[deprecated version of --out-format]' \ - '--out-format=[output updates using specified format]:format' \ - '--log-file-format=[log updates using specified format]:format' \ - '--log-file=[log what rsync is doing to the specified file]:file:_files' \ - '--password-file=[read daemon-access password from file]:file:_files' \ - '--list-only[list the files instead of copying them]' \ - '(--only-write-batch)--write-batch=[write a batched update to the specified file]:file:_files' \ - '(--write-batch)--only-write-batch=[like --write-batch but w/o updating destination]:file:_files' \ - '--protocol=[force an older protocol version to be used]:number' \ - '--iconv=[request charset conversion of filenames]:number' \ - '--read-batch=[read a batched update from the specified file]:file:_files' +_rsync() { + _arguments -s \ + '*'{-v,--verbose}'[increase verbosity]' \ + {--no-v,--no-verbose}'[turn off --verbose]' \ + '--bwlimit=[limit I/O bandwidth]:KBytes per second' \ + '--port=[specify alternate port number]:port:(873)' \ + '--address=[bind to the specified address]:bind address:_bind_addresses' \ + '(-T --temp-dir)'{-T,--temp-dir=}'[create temporary files in specified directory]:directory:_directories' \ + '--sockopts=[specify custom TCP options]' \ + '(-4 -6 --ipv4 --ipv6)'{-4,--ipv4}'[prefer IPv4]' \ + '(-4 -6 --ipv4 --ipv6)'{-6,--ipv6}'[prefer IPv6]' \ + - daemon \ + '(-)'{-h,--help}'[display help information]' \ + '--config=[specify alternate rsyncd.conf file]:file:_files' \ + '--daemon[run as an rsync daemon]' \ + '--detach[detach from the parent]' \ + '--no-detach[do not detach from the parent]' \ + - client \ + '(-)--help[display help information]' \ + '*: :_rsync_files' \ + '(-q --quiet)'{-q,--quiet}'[suppress non-error messages]' \ + '--no-motd[suppress the daemon message-of-the-day output]' \ + '(-c --checksum)'{-c,--checksum}'[skip based on checksums, not mod-time & size]' \ + '(-a --archive)'{-a,--archive}'[archive mode; same as -rlptgoD (no -H)]' \ + '(-r --recursive)'{-r,--recursive}'[recurse into directories]' \ + {--no-r,--no-recursive}'[turn off --recursive]' \ + {--no-inc-recursive,--no-i-r}'[disable incremental recursive mode]' \ + '(-R --relative)'{-R,--relative}'[use relative path names]' \ + {--no-R,--no-relative}'[turn off --relative]' \ + {--no-implied-dirs,--no-i-d}'[do not send implied dirs with --relative]' \ + '(-b --backup)'{-b,--backup}'[make backups into hierarchy at indicated directory]' \ + '--backup-dir=[make backups into specified directory]:backup directory:_directories' \ + '--suffix=[set backup suffix]:suffix:(\~)' \ + '(-u --update)'{-u,--update}'[skip files that are newer on the receiving side]' \ + '--inplace[update destination files in-place]' \ + '(--append-verify)--append[append data onto shorter files]' \ + '(--append)--append-verify[append data onto shorter files, verifying old data]' \ + '(-A --acls)'{-A,--acls}'[preserve access-control lists]' \ + '(-X --xattrs)'{-X,--xattrs}'[preserve extended attributes]' \ + '--fake-super[use xattrs to save all file attributes]' \ + '(-d --dirs)'{-d,--dirs}'[transfer directories without recursing]' \ + {--no-d,--no-dirs}'[turn off --dirs]' \ + '(-l --links)'{-l,--links}'[copy symlinks as symlinks]' \ + {--no-l,--no-links}'[turn off --links]' \ + '(-L --copy-links)'{-L,--copy-links}'[transform symlinks into referent file/dir]' \ + '(-k --copy-dirlinks)'{-k,--copy-dirlinks}'[transform a symlink to a dir into referent dir]' \ + '--copy-unsafe-links[only "unsafe" symlinks are transformed]' \ + '--safe-links[ignore symlinks that point outside the source tree]' \ + '(-H --hard-links)'{-H,--hard-links}'[preserve hard links]' \ + {--no-H,--no-hard-links}'[turn off --hard-links]' \ + '(-K --keep-dirlinks)'{-K,--keep-dirlinks}'[treat symlinked dir on receiver as dir]' \ + '(-p --perms -E --executability)'{-p,--perms}'[preserve permissions]' \ + {--no-p,--no-perms}'[turn off --perms]' \ + '(-E --executability)'{-E,--executability}'[preserve executability]' \ + '(-o --owner)'{-o,--owner}'[preserve owner]' \ + {--no-o,--no-owner}'[turn off --owner]' \ + '(-g --group)'{-g,--group}'[preserve group]' \ + {--no-g,--no-group}'[turn off --group]' \ + '(--devices --specials)-D[same as --devices --specials]' \ + '(-D)--devices[preserve devices]' \ + '--no-devices[turn off --devices]' \ + '(-D)--specials[preserve special files]' \ + '--no-specials[turn off --specials]' \ + '--no-D[turn off --devices and --specials]' \ + '(-t --times)'{-t,--times}'[preserve times]' \ + {--no-t,--no-times}'[turn off --times]' \ + '(-O --omit-dir-times)'{-O,--omit-dir-times}'[omit directories when preserving times]' \ + '--chmod[change destination permissions]:mods' \ + '(-S --sparse)'{-S,--sparse}'[handle sparse files efficiently]' \ + '(-n --dry-run)'{-n,--dry-run}'[show what would have been transferred]' \ + '(-W --whole-file)'{-W,--whole-file}'[copy files whole (without delta-transfer algorithm)]' \ + {--no-W,--no-whole-file}'[turn off --whole-file]' \ + '(-x --one-file-system)'{-x,--one-file-system}'[do not cross filesystem boundaries]' \ + '(-B --block-size)'{-B,--block-size=}'[force a fixed checksum block-size]:block size' \ + '(-e --rsh)'{-e+,--rsh=}'[specify the remote shell to use]:remote-shell command:(rsh ssh)' \ + '--rsync-path=[specify path to rsync on the remote machine]:remote command' \ + '--ignore-existing[ignore files that already exist on receiving side]' \ + '(--existing --ignore-non-existing)'{--existing,--ignore-non-existing}'[ignore files that do not exist on receiving side]' \ + '--remove-source-files[synchronized files are removed from sending side]' \ + '(--delete-before --delete-during --delete-after --delete-delay)--del[an alias for --delete-during]' \ + '--delete[delete files that do not exist on the sending side]' \ + '(--del --delete-during --delete-after --delete-delay)--delete-before[receiver deletes before transfer]' \ + '(--del --delete-before --delete-after --delete-delay)--delete-during[receiver deletes during transfer]' \ + '(--del --delete-before --delete-during --delete-delay)--delete-after[receiver deletes after transfer]' \ + '(--del --delete-before --delete-during --delete-after)--delete-delay[receiver deletes after transfer]' \ + '--delete-excluded[also delete excluded files on the receiving side]' \ + '--ignore-errors[delete even if there are I/O errors]' \ + '--force[force deletion of directories even if not empty]' \ + '--max-delete=[do not delete more than NUM files]:number' \ + '--max-size=[do not transfer any file larger than specified size]:number' \ + '--min-size=[do not transfer any file smaller than specified size]:number' \ + '(-P)--partial[keep partially transferred files]' \ + '--no-partial[turn off --partial]' \ + '--partial-dir=[put a partially transferred file into specified directory]:directory:_directories' \ + '--super[receiver attempts super-user activities]' \ + '--no-super[receiver performs normal-user activities]' \ + '--delay-updates[put all updated files into place at end of transfer]' \ + '(-m --prune-empty-dirs)'{-m,--prune-empty-dirs}'[prune empty directory chains from file-list]' \ + '--numeric-ids[do not map uid/gid values by user/group name]' \ + '--timeout=[set I/O timeout in seconds for lulls in a transfer]:seconds' \ + '--contimeout=[set connect timeout in seconds for daemon connections]:seconds' \ + '(-I --ignore-times)'{-I,--ignore-times}'[do not skip files that match in size and mod-time]' \ + '--size-only[skip files that match in size]' \ + '--modify-window=[compare mod-times with reduced accuracy]:seconds' \ + '(-y --fuzzy)'{-y,--fuzzy}'[find similar file for basis if no destination file]' \ + '(--copy-dest --link-dest)*--compare-dest=[also compare destination files relative to specified directory]:directory:_directories' \ + '(--compare-dest --link-dest)*--copy-dest=[like --compare-dest, but also includes copies of unchanged files]:directory:_directories' \ + '(--compare-dest --copy-dest)*--link-dest=[hardlink to files in specified directory hierarchy when unchanged]:directory:_directories' \ + '(-z --compress)'{-z,--compress}'[compress file data during the transfer]' \ + '--compress-level=[explicitly set compression level]:number' \ + '--skip-compress=[skip compressing files with a listed suffix]:suffixes' \ + '(-C --cvs-exclude)'{-C,--cvs-exclude}'[auto-ignore files the same way CVS does]' \ + '*'{-f=,--filter=}'[add a file-filtering rule]:rule' \ + '*-F[same as --filter="dir-merge /.rsync-filter", repeated: --filter="- .rsync-filter"]' \ + '--exclude-from=[read exclude patterns from specified file]:file:_files' \ + '*--exclude=[exclude files matching pattern]:pattern' \ + '--include-from=[read include patterns from specified file]:file:_files' \ + '*--include=[do not exclude files matching pattern]:pattern' \ + '--files-from=[read list of source-file names from specified file]:file:_files' \ + '(-0 --from0)'{-0,--from0}'[all *-from file lists are delimited by nulls]' \ + '(-s --protect-args)'{-s,--protect-args}'[no space-splitting; only wildcard special-chars]' \ + '--version[print version number]' \ + '*'{-h,--human-readable}'[output numbers in a human-readable format]' \ + '--blocking-io[use blocking I/O for the remote shell]' \ + '--no-blocking-io[turn off --blocking-io]' \ + '--stats[give some file-transfer stats]' \ + '(-8 --8-bit-output)'{-8,--8-bit-output}'[leave high-bit chars unescaped in output]' \ + '(-P)--progress[show progress during transfer]' \ + '--no-progress[turn off --progress]' \ + '(--partial --progress)-P[same as --partial --progress]' \ + '(-i --itemize-changes)'{-i,--itemize-changes}'[output a change-summary for all updates]' \ + '--log-format=[deprecated version of --out-format]' \ + '--out-format=[output updates using specified format]:format' \ + '--log-file-format=[log updates using specified format]:format' \ + '--log-file=[log what rsync is doing to the specified file]:file:_files' \ + '--password-file=[read daemon-access password from file]:file:_files' \ + '--list-only[list the files instead of copying them]' \ + '(--only-write-batch)--write-batch=[write a batched update to the specified file]:file:_files' \ + '(--write-batch)--only-write-batch=[like --write-batch but w/o updating destination]:file:_files' \ + '--protocol=[force an older protocol version to be used]:number' \ + '--iconv=[request charset conversion of filenames]:number' \ + '--read-batch=[read a batched update from the specified file]:file:_files' +} + +_rsync "$@" |