diff options
Diffstat (limited to 'Completion/Unix')
| -rw-r--r-- | Completion/Unix/Command/_ssh | 239 |
1 files changed, 201 insertions, 38 deletions
diff --git a/Completion/Unix/Command/_ssh b/Completion/Unix/Command/_ssh index dc4b65d31..8f1fb74aa 100644 --- a/Completion/Unix/Command/_ssh +++ b/Completion/Unix/Command/_ssh @@ -15,6 +15,7 @@ _ssh () { '(-6)-4[forces ssh to use IPv4 addresses only]' '(-4)-6[forces ssh to use IPv6 addresses only]' '-C[compress data]' + # for protocol version 2, this can be a comma-separated list '-c+[select encryption cipher]:encryption cipher:(idea des 3des blowfish arcfour tss none)' '-F+[specify alternate config file]:config file:_files' '-i+[select identity file]:SSH identity file:_files' @@ -36,25 +37,20 @@ _ssh () { '(-a)-A[enables forwarding of the authentication agent connection]' \ '(-A)-a[disable forwarding of authentication agent connection]' \ '(-P)-b+[specify interface to transmit on]:bind address:_bind_addresses' \ - '-D+[specify a dynamic port forwarding]:[bind-address]\:port' \ - '-e+[set escape character]:escape character (or `none'"'"'):' \ + '-D+[specify a dynamic port forwarding]:dynamic port forwarding:->dynforward' \ + '-e+[set escape character]:escape character (or `none'\''):' \ '(-n)-f[go to background]' \ '-g[allow remote hosts to connect to local forwarded ports]' \ - '-I+[specify the PKCS#11 shared library to use]' \ + '-I+[specify smartcard device]:device:_files' \ '-K[enable GSSAPI-based authentication and forwarding]' \ '-k[disable forwarding of GSSAPI credentials]' \ '*-L[specify local port forwarding]:local port forwarding:->forward' \ '-l+[specify login name]:login name:_ssh_users' \ '-M[master mode for connection sharing]' \ - '(-1)-m+[specify mac algorithms]:mac spec' \ + '(-1)-m+[specify mac algorithms]:mac spec:->macs' \ '(-1)-N[do not execute a remote command (protocol version 2 only)]' \ '-n[redirect stdin from /dev/null]' \ - '-O[control active connection multiplexing master process]:multiplex control command:(( - check\:"check that the master process is running" - forward\:"request forwardings without command execution" - cancel\:"cancel forwardings" - exit\:"request the master to exit" - stop\:"request the master to stop accepting further multiplexing requests"))' \ + '-O:multiplex control command:((check\:"check master process is running" exit\:"request the master to exit" forward\:"request forward without command execution" stop\:"request the master to stop accepting further multiplexing requests"))' \ '-P[use non privileged port]' \ '-p+[specify port on remote host]:port number on remote host' \ '(-v)*-q[quiet operation]' \ @@ -65,19 +61,19 @@ _ssh () { '(-T)-t[force pseudo-tty allocation]' \ '-V[show version number]' \ '(-q)*-v[verbose mode]' \ - '(-N)-W[forward standard input/output over host:port (protocol version 2 only)]:host\:port' \ - '-w[request tunnel device forwarding with the specified tun devices]:local_tun[\:remote_tun]' \ + '-W[forward standard input and output to host]:stdinout forward:->hostport' \ + '-w[request tunnel device forwarding]:local_tun[\:remote_tun] (integer or "any"):' \ '(-x -Y)-X[enable (untrusted) X11 forwarding]' \ '(-X -Y)-x[disable X11 forwarding]' \ '(-x -X)-Y[enable trusted X11 forwarding]' \ - '-y[send log information using the syslog module]' \ + '-y[send log info via syslog instead of stderr]' \ ':remote host name:->userhost' \ '*::args:->command' "$common[@]" && ret=0 ;; scp) _arguments -C -s \ '-3[copy through local host, not directly between the remote hosts]' \ - '-B[batch mode (don'"'"'t ask for passphrases)]' \ + '-B[batch mode (don'\''t ask for passphrases)]' \ '*:file:->file' "$common[@]" "$common_transfer[@]" && ret=0 ;; ssh-add) @@ -112,7 +108,7 @@ _ssh () { _arguments \ '-q[silence ssh-keygen]' \ "($cmds -P)-b[specify number of bits in key]:bits in key" \ - "($cmds -P)-t[specify the type of the key to create]:key type:(rsa1 rsa dsa)" \ + "($cmds -P)-t[specify the type of the key to create]:key type:(rsa1 rsa dsa ecdsa)" \ "(${cmds#-p })-N[provide new passphrase]:new passphrase" \ "($cmds -b -t)-C[provide new comment]:new comment" \ '(-D)-f[key file]:key file:_files' \ @@ -145,12 +141,18 @@ _ssh () { case "$lstate" in option) - if compset -P '*[= ]'; then + if compset -P '*='; then case "$IPREFIX" in - *(#i)(afstokenpassing|batchmode|compression|fallbacktorsh|forward(agent|x11)|keepalive|passwordauthentication|rhosts(|rsa)authentication|rsaauthentication|usersh|kerberos(authetication|tgtparsing)|useprivileged)*) + *(#i)(afstokenpassing|batchmode|challengeresponseauthentication|checkhostip|clearallforwardings|compression|enablesshkeysign|exitonforwardfailure|fallbacktorsh|forward(agent|x11)|forwardx11trusted|gatewayports|gssapiauthentication|gssapidelegatecredentials|gssapitrustdns|hashknownhosts|hostbasedauthentication|identitiesonly|kbdinteractiveauthentication|(tcp|)keepalive|nohostauthenticationforlocalhost|passwordauthentication|permitlocalcommand|pubkeyauthentication|rhosts(|rsa)authentication|rsaauthentication|usersh|kerberos(authentication|tgtpassing)|useprivilegedport|visualhostkey)=*) _wanted values expl 'truth value' compadd yes no && ret=0 ;; - *(#i)ciphers*) + *(#i)addressfamily=*) + _wanted values expl 'address family' compadd any inet inet6 && ret=0 + ;; + *(#i)bindaddress=*) + _wanted bind-addresses expl 'bind address' _bind_addresses && ret=0 + ;; + *(#i)ciphers=*) _values -s , 'encryption cipher' \ '3des-cbc' \ 'aes128-cbc' \ @@ -171,57 +173,177 @@ _ssh () { 'rijndael-cbc@lysator.liu.se' \ && ret=0 ;; - *(#i)cipher*) + *(#i)cipher=*) _wanted values expl 'encryption cipher (protocol version 1)' \ compadd blowfish 3des des idea arcfour tss none && ret=0 ;; - *(#i)controlmaster*) + *(#i)compressionlevel=*) + _values 'compression level' {1..9} && ret=0 + ;; + *(#i)connectionattempts=*) + _message -e 'connection attempts' && ret=0 + ;; + *(#i)connecttimeout=*) + _message -e 'connection timeout' && ret=0 + ;; + *(#i)controlmaster=*) _wanted values expl 'truthish value' compadd yes no auto autoask && ret=0 ;; - *(#i)controlpath*) + *(#i)controlpath=*) _description files expl 'path to control socket' _files "$expl[@]" && ret=0 ;; - *(#i)globalknownhostsfile*) + *(#i)controlpersist=*) + _message -e 'timeout' + ret=0 + _wanted values expl 'truth value' compadd yes no && ret=0 + ;; + *(#i)escapechar=*) + _message -e 'escape character (or `none'\'')' + ret=0 + ;; + *(#i)forwardx11timeout=*) + _message -e 'timeout' + ret=0 + ;; + *(#i)globalknownhostsfile=*) _description files expl 'global file with known hosts' _files "$expl[@]" && ret=0 ;; - *(#i)hostname*) + *(#i)hostname=*) _wanted hosts expl 'real host name to log into' _ssh_hosts && ret=0 ;; - *(#i)identityfile*) + *(#i)hostkeyalgorithms=*) + _values -s , 'host key algorithms' \ + 'ecdsa-sha2-nistp256-cert-v01@openssh.com' \ + 'ecdsa-sha2-nistp384-cert-v01@openssh.com' \ + 'ecdsa-sha2-nistp521-cert-v01@openssh.com' \ + 'ssh-rsa-cert-v01@openssh.com' \ + 'ssh-dss-cert-v01@openssh.com' \ + 'ssh-rsa-cert-v00@openssh.com' \ + 'ssh-dss-cert-v00@openssh.com' \ + 'ecdsa-sha2-nistp256' \ + 'ecdsa-sha2-nistp384' \ + 'ecdsa-sha2-nistp521' \ + 'ssh-rsa' \ + 'ssh-dss' && ret=0 + ;; + *(#i)identityfile=*) _description files expl 'SSH identity file' _files "$expl[@]" && ret=0 ;; - *(#i)(local|remote)forward*) + *(#i)ipqos=*) + local descr + if [[ $PREFIX = *\ *\ * ]]; then return 1; fi + if compset -P '* '; then + descr='QoS for non-interactive sessions' + else + descr='QoS [for interactive sessions if second value given, separated by white space]' + fi + _values $descr 'af11' 'af12' 'af13' 'af14' 'af22' \ + 'af23' 'af31' 'af32' 'af33' 'af41' 'af42' 'af43' \ + 'cs0' 'cs1' 'cs2' 'cs3' 'cs4' 'cs5' 'cs6' 'cs7' 'ef' \ + 'lowdelay' 'throughput' 'reliability' && ret=0 + ;; + *(#i)(local|remote)forward=*) state=forward ;; - *(#i)preferredauthentications*) + *(#i)dynamicforward=*) + state=dynforward + ;; + *(#i)kbdinteractivedevices=*) + _values -s , 'keyboard-interactive authentication methods' \ + 'bsdauth' 'pam' 'skey' && ret=0 + ;; + *(#i)kexalgorithms=*) + _values -s , 'KEX algorithms' \ + ecdh-sha2-nistp256 ecdh-sha2-nistp384 ecdh-sha2-nistp521 \ + diffie-hellman-group-exchange-sha256 \ + diffie-hellman-group-exchange-sha1 \ + diffie-hellman-group14-sha1 diffie-hellman-group1-sha1 && ret=0 + ;; + *(#i)localcommand=*) + _description commands expl 'run command locally after connecting' + _command_names && ret=0 + ;; + *(#i)loglevel=*) + _values 'log level' QUIET FATAL ERROR INFO VERBOSE\ + DEBUG DEBUG1 DEBUG2 DEBUG3 && ret=0 + ;; + *(#i)macs=*) + state=macs + ;; + *(#i)numberofpasswordprompts=*) + _message -e 'number of password prompts' + ret=0 + ;; + *(#i)pkcs11provider=*) + _description files expl 'PKCS#11 shared library' + _files -g '*.so' "$expl[@]" && ret=0 + ;; + *(#i)port=*) + _message -e 'port number on remote host' + ret=0 + ;; + *(#i)preferredauthentications=*) _values -s , 'authentication method' gssapi-with-mic \ hostbased publickey keyboard-interactive password && ret=0 ;; - *(#i)protocol*) + *(#i)protocol=*) _values -s , 'protocol version' \ '1' \ '2' && ret=0 ;; - *(#i)proxycommand*) + *(#i)proxycommand=*) compset -q shift 1 words (( CURRENT-- )) _normal && ret=0 ;; - *(#i)stricthostkeychecking*) + *(#i)rekeylimit=*) + _message -e 'maximum number of bytes transmitted before renegotiating session key' + ret=0 + ;; + *(#i)requesttty=*) + _values 'request a pseudo-tty' \ + 'no[never request a TTY]' \ + 'yes[always request a TTY when stdin is a TTY]' \ + 'force[always request a TTY]' \ + 'auto[request a TTY when opening a login session]' && ret=0 + ;; + *(#i)sendenv=*) + _wanted envs expl 'environment variable' _parameters -g 'scalar*export*' && ret=0 + ;; + *(#i)serveralivecountmax=*) + _message -e 'number of alive messages without replies before disconnecting' + ret=0 + ;; + *(#i)serveraliveinterval=*) + _message -e 'timeout in seconds since last data was received to send alive message' + ret=0 + ;; + *(#i)(stricthostkeychecking|verifyhostkeydns)=*) _wanted values expl 'checking type' compadd yes no ask && ret=0 ;; - *(#i)userknownhostsfile*) + *(#i)tunnel=*) + _values 'request device forwarding' \ + 'yes' \ + 'point-to-point' \ + 'ethernet' \ + 'no' && ret=0 + ;; + *(#i)tunneldevice=*) + _message -e 'local_tun[:remote_tun] (integer or "any")' + ret=0 + ;; + *(#i)userknownhostsfile=*) _description files expl 'user file with known hosts' _files "$expl[@]" && ret=0 ;; - *(#i)user*) + *(#i)user=*) _wanted users expl 'user to log in as' _ssh_users && ret=0 ;; - *(#i)xauthlocation*) + *(#i)xauthlocation=*) _description files expl 'xauth program' _files "$expl[@]" -g '*(-*)' && ret=0 ;; @@ -229,7 +351,7 @@ _ssh () { else # old options are after the empty "\"-line _wanted values expl 'configure file option' \ - compadd -M 'm:{a-z}={A-Z}' -qS '=' - \ + compadd -M 'm:{a-z}={A-Z}' -S '=' - \ AddressFamily \ BatchMode \ BindAddress \ @@ -257,6 +379,7 @@ _ssh () { GlobalKnownHostsFile \ GSSAPIAuthentication \ GSSAPIDelegateCredentials \ + GSSAPITrustDns \ HashKnownHosts \ Host \ HostbasedAuthentication \ @@ -317,16 +440,56 @@ _ssh () { fi ;; forward) + local port=false host=false listen=false bind=false if compset -P 1 '*:'; then - if compset -P '*:'; then - _message -e port-numbers 'port number' + if [[ $IPREFIX != (*=|)<-65535>: ]]; then + if compset -P 1 '*:'; then + if compset -P '*:'; then + port=true + else + host=true + fi + else + listen=true + ret=0 + fi else - _wanted hosts expl host _ssh_hosts -qS: + if compset -P '*:'; then + port=true + else + host=true + fi fi else - _message -e port-numbers 'listen-port number' + listen=true + bind=true fi - return + $port && { _message -e port-numbers 'port number'; ret=0 } + $listen && { _message -e port-numbers 'listen-port number'; ret=0 } + $host && { _wanted hosts expl host _ssh_hosts -S: && ret=0 } + $bind && { _wanted bind-addresses expl bind-address _bind_addresses -S: && ret=0 } + return ret + ;; + dynforward) + _message -e port-numbers 'listen-port number' + if ! compset -P '*:'; then + _wanted bind-addresses expl bind-address _bind_addresses -qS: + fi + return 0 + ;; + hostport) + if compset -P '*:'; then + _message -e port-numbers 'port number' + ret=0 + else + _wanted hosts expl host _ssh_hosts -S: && ret=0 + fi + return ret + ;; + macs) + _values -s , 'MAC algorithms' hmac-md5 hmac-sha1 umac-64@openssh.com \ + hmac-ripemd160 hmac-sha1-96 hmac-md5-96 hmac-sha2-256 \ + hmac-sha2-256-96 hmac-sha2-512 hmac-sha2-512-96 && ret=0 ;; command) shift 1 words |