diff options
Diffstat (limited to 'Completion/Linux/Command')
| -rw-r--r-- | Completion/Linux/Command/_analyseplugin | 2 | ||||
| -rw-r--r-- | Completion/Linux/Command/_ethtool | 80 | ||||
| -rw-r--r-- | Completion/Linux/Command/_ipset | 78 | ||||
| -rw-r--r-- | Completion/Linux/Command/_mdadm | 120 | ||||
| -rw-r--r-- | Completion/Linux/Command/_rpmbuild | 78 | ||||
| -rw-r--r-- | Completion/Linux/Command/_strace | 78 |
6 files changed, 218 insertions, 218 deletions
diff --git a/Completion/Linux/Command/_analyseplugin b/Completion/Linux/Command/_analyseplugin index e7f90ba7b..f7f36db50 100644 --- a/Completion/Linux/Command/_analyseplugin +++ b/Completion/Linux/Command/_analyseplugin @@ -4,7 +4,7 @@ local expl context state line nopts ret=1 typeset -A opt_args _arguments \ - '-l[Gives a brief listing (one line per plugin)]' \ + '-l[gives a brief listing (one line per plugin)]' \ '(-)1:plugin file:->pfile' \ '(-)2::plugin label:->plabel' && ret=0 diff --git a/Completion/Linux/Command/_ethtool b/Completion/Linux/Command/_ethtool index 2fabd81da..a01d38823 100644 --- a/Completion/Linux/Command/_ethtool +++ b/Completion/Linux/Command/_ethtool @@ -24,29 +24,29 @@ if [[ $CURRENT -ge 4 ]]; then ;; advertise) _values 'hexidecimal value (or a combination of the following)' \ - '0x001[10 Half]' \ - '0x002[10 Full]' \ - '0x004[100 Half]' \ - '0x008[100 Full]' \ - '0x010[1000 Half(not supported by IEEE standards)]' \ - '0x020[1000 Full]' \ - '0x8000[2500 Full(not supported by IEEE standards)]' \ - '0x800[10000 Full]' \ - '0x03F[Auto]' + '0x001[10 half]' \ + '0x002[10 full]' \ + '0x004[100 half]' \ + '0x008[100 full]' \ + '0x010[1000 half(not supported by IEEE standards)]' \ + '0x020[1000 full]' \ + '0x8000[2500 full(not supported by IEEE standards)]' \ + '0x800[10000 full]' \ + '0x03F[auto]' ;; xcvr) _wanted -x xcvr expl 'transceiver type' compadd internal external ;; wol) _values -s '' 'Wake-on-LAN options' \ - '(d)p[Wake on phy activity]' \ - '(d)u[Wake on unicast messages]' \ - '(d)m[Wake on multicast messages]' \ - '(d)b[Wake on broadcast messages]' \ - '(d)a[Wake on ARP]' \ - '(d)g[Wake on MagicPacket(tm)]' \ - '(d)s[Enable SecureOn(tm) password for MagicPacket(tm)]' \ - '(p u m b a g s)d[Disable (wake on nothing)]' + '(d)p[wake on phy activity]' \ + '(d)u[wake on unicast messages]' \ + '(d)m[wake on multicast messages]' \ + '(d)b[wake on broadcast messages]' \ + '(d)a[wake on ARP]' \ + '(d)g[wake on MagicPacket(tm)]' \ + '(d)s[enable SecureOn(tm) password for MagicPacket(tm)]' \ + '(p u m b a g s)d[disable (wake on nothing)]' ;; sopass) _message -e secureon 'password - 6 bytes in ethernet MAC hex format (xx:yy:zz:aa:bb:cc)' @@ -58,9 +58,9 @@ if [[ $CURRENT -ge 4 ]]; then case $words[2]; in -A|--pause) _values -S ' ' -w 'pause options' \ - 'autoneg[Specify if pause autonegotiation is enabled]' \ - 'rx[Specify if RX pause is enabled]' \ - 'tx[Specify if TX pause is enabled]' + 'autoneg[specify if pause autonegotiation is enabled]' \ + 'rx[specify if RX pause is enabled]' \ + 'tx[specify if TX pause is enabled]' ;; -C|--coalesce) _values -S ' ' -w 'coalescing settings' \ @@ -78,10 +78,10 @@ if [[ $CURRENT -ge 4 ]]; then ;; -G|--set-ring) _values -S ' ' -w 'ring parameters' \ - 'rx[Change number of ring entries for the RX ring]' \ - 'rx-mini[Change number of ring entries for the RX Mini ring]' \ - 'rx-jumbo[Change number of ring entries for the RX Jumbo ring]' \ - 'tx[Change number of ring entries for the TX ring]' + 'rx[change number of ring entries for the RX ring]' \ + 'rx-mini[change number of ring entries for the RX Mini ring]' \ + 'rx-jumbo[change number of ring entries for the RX Jumbo ring]' \ + 'tx[change number of ring entries for the TX ring]' ;; -d|--register-dump) _values -S ' ' -w 'register dump options' \ @@ -103,12 +103,12 @@ if [[ $CURRENT -ge 4 ]]; then ;; -K|--offload) _values -S ' ' -w 'offload options' \ - 'rx[Specify if RX checksumming is enabled]' \ - 'tx[Specify if TX checksumming is enabled]' \ - 'sg[Specify if scatter-gather is enabled]' \ - 'tso[Specify if TCP segmentation offload is enabled]' \ - 'ufo[Specify if UDP segmentation offload is enabled]' \ - 'gso[Specify if generic segmentation offload is enabled]' + 'rx[specify if RX checksumming is enabled]' \ + 'tx[specify if TX checksumming is enabled]' \ + 'sg[specify if scatter-gather is enabled]' \ + 'tso[specify if TCP segmentation offload is enabled]' \ + 'ufo[specify if UDP segmentation offload is enabled]' \ + 'gso[specify if generic segmentation offload is enabled]' ;; -p|--identify) if [[ $CURRENT -eq 4 ]] && _message -e length 'seconds' @@ -120,16 +120,16 @@ if [[ $CURRENT -ge 4 ]]; then ;; -s|--change) _values -S ' ' -w 'change setting' \ - 'speed[Set speed in Mb/s]' \ - 'duplex[Set full or half duplex mode]' \ - 'port[Select device port]' \ - 'autoneg[Specify if autonegotiation is enabled]' \ - 'advertise[Set the speed and duplex advertised by autonegotiation]' \ + 'speed[set speed in Mb/s]' \ + 'duplex[set full or half duplex mode]' \ + 'port[select device port]' \ + 'autoneg[specify if autonegotiation is enabled]' \ + 'advertise[set the speed and duplex advertised by autonegotiation]' \ 'phyad[PHY address]' \ - 'xcvr[Select transceiver type]' \ - 'wol[Set Wake-on-LAN options]' \ - 'sopass[Set the SecureOn(tm) password]' \ - 'msglvl[Set the driver message level]' + 'xcvr[select transceiver type]' \ + 'wol[set Wake-on-LAN options]' \ + 'sopass[set the SecureOn(tm) password]' \ + 'msglvl[set the driver message level]' ;; esac ;; @@ -153,7 +153,7 @@ _arguments \ "($cmds)"{-i,--driver}'[queries the specified ethernet device for associated driver information]' \ "($cmds)"{-d,--register-dump}'[retrieves and prints a register dump for the specified ethernet device]' \ "($cmds)"{-e,--eeprom-dump}'[retrieves and prints an EEPROM dump for the specified ethernet device]' \ - "($cmds)"{-E,--change-eeprom}'[Changes EEPROM byte for the specified ethernet device]' \ + "($cmds)"{-E,--change-eeprom}'[changes EEPROM byte for the specified ethernet device]' \ "($cmds)"{-k,--show-offload}'[queries the specified ethernet device for offload information]' \ "($cmds)"{-K,--offload}'[change the offload parameters of the specified ethernet device]' \ "($cmds)"{-p,--identify}'[initiates adapter-specific action intended to identify the adapter by sight]' \ diff --git a/Completion/Linux/Command/_ipset b/Completion/Linux/Command/_ipset index 244cb8f22..7896eace7 100644 --- a/Completion/Linux/Command/_ipset +++ b/Completion/Linux/Command/_ipset @@ -5,17 +5,17 @@ local -a args from_to hash cmds listopts _set_types () { _values -S \ "Set type" \ - 'ipmap[Up to 65536 IP addresses]' \ - 'macipmap[Up to 65536 IP addresses with MAC]' \ - 'portmap[Up to 65536 ports]' \ - 'iphash[Hash of IP addresses]' \ - 'nethash[Hash of network addresses]' \ - 'ipporthash[Hash of IP address and port pairs]' \ - 'ipportiphash[Hash of IP address,port and IP address triples]' \ - 'ipportnethash[Hash of IP address,port and network address triples]' \ - 'iptree[Tree of IP addresses, optionally with timeout]' \ - 'iptreemap[Tree of IP addresses or networks]' \ - 'setlist[List of sets]' + 'ipmap[up to 65536 IP addresses]' \ + 'macipmap[up to 65536 IP addresses with MAC]' \ + 'portmap[up to 65536 ports]' \ + 'iphash[hash of IP addresses]' \ + 'nethash[hash of network addresses]' \ + 'ipporthash[hash of IP address and port pairs]' \ + 'ipportiphash[hash of IP address,port and IP address triples]' \ + 'ipportnethash[hash of IP address,port and network address triples]' \ + 'iptree[tree of IP addresses, optionally with timeout]' \ + 'iptreemap[tree of IP addresses or networks]' \ + 'setlist[list of sets]' } if [[ $words[2] = (-q|--quiet) ]]; then @@ -50,9 +50,9 @@ from_to=('(--network)--from[from IP or network (with --netmask)]:IP' '(--network)--to[to IP or network (with --netmask)]:IP' '(--from --to)--network[network]:IP/mask' ) -hash=( '--hashsize[The initial hash size (default 1024)]:hash size' - '--probes[Max number of tries to resolve clashing (default 8)]:probes' - '--resize[Ratio of increasing hash size after unsuccessful <probes> number of double-hashing]:percent' +hash=( '--hashsize[the initial hash size (default 1024)]:hash size' + '--probes[max number of tries to resolve clashing (default 8)]:probes' + '--resize[ratio of increasing hash size after unsuccessful <probes> number of double-hashing]:percent' ) case $words[offset+2]; in @@ -65,7 +65,7 @@ case $words[offset+2]; in ;; macipmap) args=( $from_to - '--matchunset[Always match IP addresses which could be stored in the set but are not]' + '--matchunset[always match IP addresses which could be stored in the set but are not]' ) ;; portmap) @@ -85,21 +85,21 @@ case $words[offset+2]; in args=( $from_to $hash ) ;; iptree) - args=( '--timeout[Timeout value for the entries in seconds (default 0)]:timeout' ) + args=( '--timeout[timeout value for the entries in seconds (default 0)]:timeout' ) ;; iptreemap) - args=( '--gc[Garbage collection inverval (default 300 seconds)]:timeout' ) + args=( '--gc[garbage collection inverval (default 300 seconds)]:timeout' ) ;; setlist) - args=( '--size[Size of the new setlist (default 8)]:size' ) + args=( '--size[size of the new setlist (default 8)]:size' ) ;; esac ;; -T|--test) - args=( '(-b --binding)'{-b,--binding}'[Test wether '$words[offset+4]' points to the specified binding]:::_ipsets' ) + args=( '(-b --binding)'{-b,--binding}'[test whether '$words[offset+4]' points to the specified binding]:::_ipsets' ) ;; -B|--bind) - args=( '(-b --binding)'{-b,--binding}'[Value of the binding]:::_ipsets' ) + args=( '(-b --binding)'{-b,--binding}'[value of the binding]:::_ipsets' ) ;; esac @@ -139,25 +139,25 @@ cmds=(-N -X -F -E -W -S -R -A -D -T -B -U -H --create --destroy --flush --rename listopts=(-n --numeric -s --sorted -L --list -nL -sL -nsL -snL -ns -sn) _arguments \ - "($cmds $listopts)"{-N,--create}'[Create a set]:set name::::_set_types' \ - "($cmds $listopts)"{-X,--destroy}'[Destroy specified set (or all if none specified)]:set name:_sets' \ - "($cmds $listopts)"{-F,--flush}'[Flush specified set (or all if none specified)]:set name:_sets' \ + "($cmds $listopts)"{-N,--create}'[create a set]:set name::::_set_types' \ + "($cmds $listopts)"{-X,--destroy}'[destroy specified set (or all if none specified)]:set name:_sets' \ + "($cmds $listopts)"{-F,--flush}'[flush specified set (or all if none specified)]:set name:_sets' \ "($cmds $listopts)"{-E,--rename}'[rename set]:current set name:_ipsets:new set name:' \ "($cmds $listopts)"{-W,--swap}'[swap two sets]:::_ipsets:::_ipsets' \ - "($cmds -L --list -q --quiet -nL -sL -nsL -snL)"{-L,--list}'[List the entries and bindings for the specified set (or all if none specified)]:::_sets' \ - "($cmds -L --list -q --quiet -n --numeric -snL -nsL -sL -ns -sn)"-nL'[List the entries and bindings for the specified set (or all if none specified) \- numeric output]:::_sets' \ - "($cmds -L --list -q --quiet -s --sorted -snL -nsL -nL -ns -sn)"-sL'[List the entries and bindings for the specified set (or all if none specified) \- sorted output]:::_sets' \ - "($cmds $listopts -q --quiet)"{-nsL,-snL}'[List the entries and bindings for the specified set (or all if none specified) \- sorted numeric output]:::_sets' \ - "($cmds $listopts)"{-S,--save}'[Save the given set (or all if none specified)]:::_sets' \ - "($cmds $listopts)"{-R,--restore}'[Restore a saved session generated by --save from stdin]' \ - "($cmds $listopts)"{-A,--add}'[Add an IP to a set]:::_ipsets:IP' \ - "($cmds $listopts)"{-D,--del}'[Delete an IP from a set]:::_ipsets:::_ips' \ - "($cmds $listopts)"{-T,--test}'[Test wether an IP is in a set or the IP points to the specified binding]:::_ipsets:::_ips' \ - "($cmds $listopts)"{-B,--bind}'[Bind the IP in setname to to-setname]:::_ipsets:::_ips' \ - "($cmds $listopts)"{-U,--unbind}'[Delete the binding belonging to IP in set setname]:::_ipsets:::_ips' \ - "($cmds $listopts)"{-H,--help}'[Print help and settype specific help if settype specified]:::_set_types' \ - "(-q --quiet $listopts)"{-q,--quiet}'[Suppress any output to stdout and stderr]' \ - "($cmds -s --sorted -q --quiet -sL -nsL -snL -ns -sn)"{-s,--sorted}'[Sorted output]' \ - "($cmds -n --numeric -q --quiet -nL -nsL -snL -ns -sn)"{-n,--numeric}"[Numeric output; don't resolve host names, network names and services]" \ - "($cmds -ns -sn -q --quiet -nL -sL -nsL -snL -n --numeric -s --sorted)"{-ns,-sn}'[Sorted numeric output]' \ + "($cmds -L --list -q --quiet -nL -sL -nsL -snL)"{-L,--list}'[list the entries and bindings for the specified set (or all if none specified)]:::_sets' \ + "($cmds -L --list -q --quiet -n --numeric -snL -nsL -sL -ns -sn)"-nL'[list the entries and bindings for the specified set (or all if none specified) \- numeric output]:::_sets' \ + "($cmds -L --list -q --quiet -s --sorted -snL -nsL -nL -ns -sn)"-sL'[list the entries and bindings for the specified set (or all if none specified) \- sorted output]:::_sets' \ + "($cmds $listopts -q --quiet)"{-nsL,-snL}'[list the entries and bindings for the specified set (or all if none specified) \- sorted numeric output]:::_sets' \ + "($cmds $listopts)"{-S,--save}'[save the given set (or all if none specified)]:::_sets' \ + "($cmds $listopts)"{-R,--restore}'[restore a saved session generated by --save from stdin]' \ + "($cmds $listopts)"{-A,--add}'[add an IP to a set]:::_ipsets:IP' \ + "($cmds $listopts)"{-D,--del}'[delete an IP from a set]:::_ipsets:::_ips' \ + "($cmds $listopts)"{-T,--test}'[test wether an IP is in a set or the IP points to the specified binding]:::_ipsets:::_ips' \ + "($cmds $listopts)"{-B,--bind}'[bind the IP in setname to to-setname]:::_ipsets:::_ips' \ + "($cmds $listopts)"{-U,--unbind}'[delete the binding belonging to IP in set setname]:::_ipsets:::_ips' \ + "($cmds $listopts)"{-H,--help}'[print help and settype specific help if settype specified]:::_set_types' \ + "(-q --quiet $listopts)"{-q,--quiet}'[suppress any output to stdout and stderr]' \ + "($cmds -s --sorted -q --quiet -sL -nsL -snL -ns -sn)"{-s,--sorted}'[sorted output]' \ + "($cmds -n --numeric -q --quiet -nL -nsL -snL -ns -sn)"{-n,--numeric}"[numeric output; don't resolve host names, network names and services]" \ + "($cmds -ns -sn -q --quiet -nL -sL -nsL -snL -n --numeric -s --sorted)"{-ns,-sn}'[sorted numeric output]' \ "$args[@]" diff --git a/Completion/Linux/Command/_mdadm b/Completion/Linux/Command/_mdadm index 84f4748ec..461e66617 100644 --- a/Completion/Linux/Command/_mdadm +++ b/Completion/Linux/Command/_mdadm @@ -36,24 +36,24 @@ _layouts () { ;; 10|raid10) _values -s ' ' 'RAID10 layout with number of copies of each datablock' \ - 'n1[Near copies]' \ - 'n2[Near copies]' \ - 'n3[Near copies]' \ - 'n4[Near copies]' \ - 'n5[Near copies]' \ - 'n6[Near copies]' \ - 'n7[Near copies]' \ - 'n8[Near copies]' \ - 'n8[Near copies]' \ - 'f1[Far copies]' \ - 'f2[Far copies]' \ - 'f3[Far copies]' \ - 'f4[Far copies]' \ - 'f5[Far copies]' \ - 'f6[Far copies]' \ - 'f7[Far copies]' \ - 'f8[Far copies]' \ - 'f9[Far copies]' + 'n1[near copies]' \ + 'n2[near copies]' \ + 'n3[near copies]' \ + 'n4[near copies]' \ + 'n5[near copies]' \ + 'n6[near copies]' \ + 'n7[near copies]' \ + 'n8[near copies]' \ + 'n8[near copies]' \ + 'f1[far copies]' \ + 'f2[far copies]' \ + 'f3[far copies]' \ + 'f4[far copies]' \ + 'f5[far copies]' \ + 'f6[far copies]' \ + 'f7[far copies]' \ + 'f8[far copies]' \ + 'f9[far copies]' ;; faulty) _values -S \ "Failure mode" \ @@ -70,46 +70,46 @@ _layouts () { if (( $+words[(r)-(A|-assemble)] )); then args=( - '(--bitmap)'--bitmap='[bitmap file to use with the array]::Bitmap file:_files' + '(--bitmap)'--bitmap='[bitmap file to use with the array]::bitmap file:_files' '(--uuid -u)'{--uuid=,-u}'[UUID of array to assemble]:UUID' - '(--super-minor -m)'{--super-minor=,-m}'[minor number to look for in super-block]:Minor number' - '(--name -N)'{--name=,-N}'[Array name to look for in super-block]:Array name' - '(--config -c)'{--config=,-c}'[config file]::Config file:_files' + '(--super-minor -m)'{--super-minor=,-m}'[minor number to look for in super-block]:minor number' + '(--name -N)'{--name=,-N}'[array name to look for in super-block]:array name' + '(--config -c)'{--config=,-c}'[config file]::config file:_files' '(--scan -s)'{--scan,-s}'[scan config file for missing information]' - '(--run -R)'{--run,-R}'[Try to start the array even if not enough devices for a full array are present]' - '(--force -f)'{--force,-f}'[Assemble the array even if some superblocks appear out-of-date]' - '(--update,-U)'{--update=,-U}'[Update superblock]::Update the superblock:(sparc2.2 summaries uuid resync byteorder super-minor)' + '(--run -R)'{--run,-R}'[try to start the array even if not enough devices for a full array are present]' + '(--force -f)'{--force,-f}'[assemble the array even if some superblocks appear out-of-date]' + '(--update,-U)'{--update=,-U}'[update superblock]::update the superblock:(sparc2.2 summaries uuid resync byteorder super-minor)' ) fi if (( $+words[(r)-(B|-build)] )); then args=( - '(--bitmap)'--bitmap='[file to store/find bitmap information in]::Bitmap file:_files' - '(--chunk -c)'{--chunk=,-c}'[chunk size of kibibytes]:Chunk size' - '(--rounding)'--rounding='[rounding factor for linear array (==chunk size)]:Rounding factor' + '(--bitmap)'--bitmap='[file to store/find bitmap information in]::bitmap file:_files' + '(--chunk -c)'{--chunk=,-c}'[chunk size of kibibytes]:chunk size' + '(--rounding)'--rounding='[rounding factor for linear array (==chunk size)]:rounding factor' '(--level -l)'{--level=,-l}'[RAID level]::RAID level:_raids_build' '(--raid-devices -n)'{--raid-devices=,-n}'[number of active devices in array]:active devices number' - '(--bitmap-chunk)'--bitmap-chunk='[bitmap chunksize in Kilobytes]:Bitmap chunk' - '(--delay -d)'{--delay=,-d}'[bitmap update delay in seconds]:Bitmap update delay' + '(--bitmap-chunk)'--bitmap-chunk='[bitmap chunksize in Kilobytes]:bitmap chunk' + '(--delay -d)'{--delay=,-d}'[bitmap update delay in seconds]:bitmap update delay' ) fi if (( $+words[(r)-(C|-create)] )); then args=( - '(--bitmap)'--bitmap='[create a bitmap for the array with the given filename]::Bitmap file:_files' - '(--chunk -c)'{--chunk=,-c}'[chunk size of kibibytes]:Chunk size' - '(--rounding)'--rounding='[rounding factor for linear array (==chunk size)]:Rounding factor' + '(--bitmap)'--bitmap='[create a bitmap for the array with the given filename]::bitmap file:_files' + '(--chunk -c)'{--chunk=,-c}'[chunk size of kibibytes]:chunk size' + '(--rounding)'--rounding='[rounding factor for linear array (==chunk size)]:rounding factor' '(--level -l)'{--level=,-l}'[RAID level]::RAID level:_raids' - '(--parity -p --layout)'{--parity=,-p,--layout=}'[RAID5/6/10 parity algorithm, faulty mode]::Layout:_layouts' + '(--parity -p --layout)'{--parity=,-p,--layout=}'[RAID5/6/10 parity algorithm, faulty mode]::layout:_layouts' '(--raid-devices -n)'{--raid-devices=,-n}'[number of active devices in array]:active devices number' - '(--spare-devices -x)'{--spare-devices=,-x}'[number of spares (eXtras) devices in initial array]:Spare devices number' - '(--size -z)'{--size=,-z}'[size (in K) of each drive in RAID1/4/5/6/10]:Size of each drive' + '(--spare-devices -x)'{--spare-devices=,-x}'[number of spares (eXtras) devices in initial array]:spare devices number' + '(--size -z)'{--size=,-z}'[size (in K) of each drive in RAID1/4/5/6/10]:size of each drive' '(--force -f)'{--force,-f}'[honour devices as listed on command line]' '(--run -R)'{--run,-R}'[insist of running the array even if not all devices are present or some look odd]' '(--readonly -o)'{--readonly,-o}'[start the array readonly]' - '(--name -N)'{--name=,-N}'[textual name for array - max 32 characters]:Array name' - '(--bitmap-chunk)'--bitmap-chunk='[bitmap chunksize in Kilobytes]:Bitmap chunk' - '(--delay -d)'{--delay,-d}'[bitmap update delay in seconds]:Bitmap update delay' + '(--name -N)'{--name=,-N}'[textual name for array - max 32 characters]:array name' + '(--bitmap-chunk)'--bitmap-chunk='[bitmap chunksize in Kilobytes]:bitmap chunk' + '(--delay -d)'{--delay,-d}'[bitmap update delay in seconds]:bitmap update delay' ) fi @@ -126,22 +126,22 @@ fi if (( $+words[(r)-(F|-follow|-monitor)] )); then args=( - '(--mail -m)'{--mail=,-m}'[Address to mail alerts of failure to]:::_email_addresses' - '(--program -p --alert)'{--program=,-p,--alert=}'[Program to run when an event is detected]::Program:_files' + '(--mail -m)'{--mail=,-m}'[address to mail alerts of failure to]:::_email_addresses' + '(--program -p --alert)'{--program=,-p,--alert=}'[program to run when an event is detected]::program:_files' '(--delay -d)'{--delay=,-d}'[seconds of delay between polling state]:seconds' - '(--config -c)'{--config=,-c}'[specify a different config file]::Config file:_files' + '(--config -c)'{--config=,-c}'[specify a different config file]::config file:_files' '(--scan -s)'{--scan,-s}'[find mail-address/program in config file]' - '(--daemonise -f)'{--daemonise,-f}'[Fork and continue in child, parent exits]' - '(--pid-file -i)'{--pid-file=,-i}'[In daemon mode write pid to specified file instead of stdout]::PID file:_files' - '(--oneshot -1)'{--oneshot,-1}'[Check for degraded arrays, then exit]' - '(--test -t)'{--test,-t}'[Generate a TestMessage event against each array at startup]' + '(--daemonise -f)'{--daemonise,-f}'[fork and continue in child, parent exits]' + '(--pid-file -i)'{--pid-file=,-i}'[in daemon mode write pid to specified file instead of stdout]::PID file:_files' + '(--oneshot -1)'{--oneshot,-1}'[check for degraded arrays, then exit]' + '(--test -t)'{--test,-t}'[generate a TestMessage event against each array at startup]' ) fi if (( $+words[(r)-(G|-grow)] )); then args=( - '(--size -z)'{--size=,-z}'[Change the active size of devices in an array]:active size' - '(--raid-disks -n)'{--raid-disks=,-n}'[Change the number of active devices in a RAID1 array]:number of active devices' + '(--size -z)'{--size=,-z}'[change the active size of devices in an array]:active size' + '(--raid-disks -n)'{--raid-disks=,-n}'[change the number of active devices in a RAID1 array]:number of active devices' ) fi @@ -150,22 +150,22 @@ _mds () { vals=( ${${${(M)${(f)"$(< /etc/mdadm.conf)"}##ARRAY *}//ARRAY /}%%[[:blank:]]*} ) _describe -t mds "RAID devices" vals _arguments \ - "(-h --help)"{-h,--help}'[Display a mode specific help message]' + "(-h --help)"{-h,--help}'[display a mode specific help message]' } modes=(-A --assemble -B --build -C --create -F --follow --monitor -G --grow -h --help -V --version) misc=(-D --detail -E --examine -X --examine-bitmap -Q --query) _arguments \ - "($misc $modes)"{-A,--assemble}'[Assemble a pre-existing array]:::_mds' \ - "($misc $modes)"{-B,--build}'[Build a legacy array without superblocks]:::_mds' \ - "($misc $modes)"{-C,--create}'[Create a new array]' \ - "($misc $modes)"{-F,--follow,--monitor}'[Select Monitor mode]' \ - "($misc $modes)"{-G,--grow}'[Change the size or shape of an active array]' \ - "($modes -D --detail -E --examine -X --examine-bitmap)"{-D,--detail}'[Print detail of one or more md devices]' \ - "($modes -D --detail -E --examine -X --examine-bitmap -Q --query)"{-E,--examine}'[Print content of md superblock on device(s)]' \ - "($modes -Q --query)"{-Q,--query}'[Examine a device]' \ - "($modes -E --examine -X --examine-bitmap)"{-X,--examine-bitmap}'[Report information about a bitmap file]' \ - "(-)"{-h,--help}'[Display general help message]' \ - "(-)"{-V,--version}'[Print version information for mdadm]' \ + "($misc $modes)"{-A,--assemble}'[assemble a pre-existing array]:::_mds' \ + "($misc $modes)"{-B,--build}'[build a legacy array without superblocks]:::_mds' \ + "($misc $modes)"{-C,--create}'[create a new array]' \ + "($misc $modes)"{-F,--follow,--monitor}'[select Monitor mode]' \ + "($misc $modes)"{-G,--grow}'[change the size or shape of an active array]' \ + "($modes -D --detail -E --examine -X --examine-bitmap)"{-D,--detail}'[print detail of one or more md devices]' \ + "($modes -D --detail -E --examine -X --examine-bitmap -Q --query)"{-E,--examine}'[print content of md superblock on device(s)]' \ + "($modes -Q --query)"{-Q,--query}'[examine a device]' \ + "($modes -E --examine -X --examine-bitmap)"{-X,--examine-bitmap}'[report information about a bitmap file]' \ + "(-)"{-h,--help}'[display general help message]' \ + "(-)"{-V,--version}'[print version information for mdadm]' \ "$args[@]" diff --git a/Completion/Linux/Command/_rpmbuild b/Completion/Linux/Command/_rpmbuild index 59f997b0c..74d4464d8 100644 --- a/Completion/Linux/Command/_rpmbuild +++ b/Completion/Linux/Command/_rpmbuild @@ -10,44 +10,44 @@ options=(--quiet -v -vv --verbose --rcfile --pipe --dbpath -r --root --buildroot b_options=(--clean --nobuild --nodeps --nodigest --nosignature --rmsource --rmspec --short-circuit --sign --target --debug --with --without) _arguments \ - "($cmds $b_cmds $t_cmds)"{-ba,-ta}'[Build binary and source packages]' \ - "($cmds $b_cmds $t_cmds)"{-bb,-tb}'[Build a binary package]' \ - "($cmds $b_cmds $t_cmds)"{-bp,-tp}'[Execute the "%prep" stage]' \ - "($cmds $b_cmds $t_cmds)"{-bc,-tc}'[Do the "%build" stage]' \ - "($cmds $b_cmds $t_cmds)"{-bi,-ti}'[Do the "%install" stage]' \ - "($cmds $b_cmds $t_cmds)"{-bl,-tl}'[Do a "list check"]' \ - "($cmds $b_cmds $t_cmds)"{-bs,-ts}'[Build just the source package]' \ - "($cmds $b_cmds $t_cmds * $b_options $options)"{-\?,--help}'[Show help message]' \ - "($cmds $b_cmds $t_cmds * $b_options $options)"--querytags'[Display known query tags]' \ - "($cmds $b_cmds $t_cmds * $b_options)"--showrc'[Display final rpmrc and macro configuration]' \ - "($cmds $b_cmds $t_cmds * $b_options $options)"--usage'[Display brief usage message]' \ - "($cmds $b_cmds $t_cmds * $b_options $options)"--version'[Print the version of rpm being used]' \ - "(-v --verbose -vv)"--quiet'[Print as little as possible]' \ - "(-v --verbose --quiet)"{-v,--verbose}'[Print verbose information]' \ - "(-v --verbose --quiet)"-vv'[Print lots of ugly debugging information]' \ + "($cmds $b_cmds $t_cmds)"{-ba,-ta}'[build binary and source packages]' \ + "($cmds $b_cmds $t_cmds)"{-bb,-tb}'[build a binary package]' \ + "($cmds $b_cmds $t_cmds)"{-bp,-tp}'[execute the "%prep" stage]' \ + "($cmds $b_cmds $t_cmds)"{-bc,-tc}'[do the "%build" stage]' \ + "($cmds $b_cmds $t_cmds)"{-bi,-ti}'[do the "%install" stage]' \ + "($cmds $b_cmds $t_cmds)"{-bl,-tl}'[do a "list check"]' \ + "($cmds $b_cmds $t_cmds)"{-bs,-ts}'[build just the source package]' \ + "($cmds $b_cmds $t_cmds * $b_options $options)"{-\?,--help}'[show help message]' \ + "($cmds $b_cmds $t_cmds * $b_options $options)"--querytags'[display known query tags]' \ + "($cmds $b_cmds $t_cmds * $b_options)"--showrc'[display final rpmrc and macro configuration]' \ + "($cmds $b_cmds $t_cmds * $b_options $options)"--usage'[display brief usage message]' \ + "($cmds $b_cmds $t_cmds * $b_options $options)"--version'[print the version of rpm being used]' \ + "(-v --verbose -vv)"--quiet'[print as little as possible]' \ + "(-v --verbose --quiet)"{-v,--verbose}'[print verbose information]' \ + "(-v --verbose --quiet)"-vv'[print lots of ugly debugging information]' \ --rcfile'[RC files]:RC files:_files -S\:' \ - --macros'[Macros files]:Macros files:_files -S\:' \ - --pipe'[Command to pipe the output of rpm to]:command' \ - --dbpath'[Set database directory]:Database directory:_files -/' \ - "(-r --root)"{-r,--root}'[Root file system tree]:Chroot directory:_files -/' \ - --buildroot'[Override the BuildRoot]:BuildRoot directory:_files -/' \ - --clean'[Remove the build tree after the packages are made]' \ - --nobuild'[Do not execute any build stages (for spec testing purposes]' \ - --nodeps'[Do not verify build dependencies]' \ - --nodigest"[Don't verify package digest(s)]" \ - --nosignature"[Don't verify package signature(s)]" \ - --rmsource'[Remove the sources after the build]' \ - --rmspec'[Remove the spec file after the build]' \ - --short-circuit'[Skip straight to specified stage (-bc, -bi or -bb in PLD Linux]' \ - --sign'[Embed a GPG signature]' \ - --target='[Set target platform]:arch-vendor-os:' \ - {'*-D','*--define='}'[Define MACRO with value EXPR]:MACRO EXPR' \ - {'*-E','*--eval='}'[Print macro expansion of EXPR]:EXPR' \ - '*--with[Enable configure option for build]:option' \ - '*--without[Disable configure option for build]:option' \ - "($cmds $b_cmds $t_cmds * $b_options)"--bcond'[Find all --with/--without values]' \ - --debug'[Build packages with debug information]' \ - "($cmds $b_cmds $t_cmds * $b_options)"--install-build-tree'[Make all needed dirs for building binary rpms]' \ - "(--clean $b_cmds $t_cmds --rebuild)"--recompile'[Recompile source package]' \ - "(--clean $b_cmds $t_cmds --recompile)"--rebuild'[Rebuild source package]' \ + --macros'[macros files]:macros files:_files -S\:' \ + --pipe'[command to pipe the output of rpm to]:command' \ + --dbpath'[set database directory]:database directory:_files -/' \ + "(-r --root)"{-r,--root}'[root file system tree]:chroot directory:_files -/' \ + --buildroot'[override the BuildRoot]:BuildRoot directory:_files -/' \ + --clean'[remove the build tree after the packages are made]' \ + --nobuild'[do not execute any build stages (for spec testing purposes]' \ + --nodeps'[do not verify build dependencies]' \ + --nodigest"[don't verify package digest(s)]" \ + --nosignature"[don't verify package signature(s)]" \ + --rmsource'[remove the sources after the build]' \ + --rmspec'[remove the spec file after the build]' \ + --short-circuit'[skip straight to specified stage (-bc, -bi or -bb in PLD Linux]' \ + --sign'[embed a GPG signature]' \ + --target='[set target platform]:arch-vendor-os:' \ + {'*-D','*--define='}'[define MACRO with value EXPR]:MACRO EXPR' \ + {'*-E','*--eval='}'[print macro expansion of EXPR]:EXPR' \ + '*--with[enable configure option for build]:option' \ + '*--without[disable configure option for build]:option' \ + "($cmds $b_cmds $t_cmds * $b_options)"--bcond'[find all --with/--without values]' \ + --debug'[build packages with debug information]' \ + "($cmds $b_cmds $t_cmds * $b_options)"--install-build-tree'[make all needed dirs for building binary rpms]' \ + "(--clean $b_cmds $t_cmds --rebuild)"--recompile'[recompile source package]' \ + "(--clean $b_cmds $t_cmds --recompile)"--rebuild'[rebuild source package]' \ "*:file:_files -g '(#i)*.(spec|srpm|tgz|tar|tar.gz|tar.bz2)(-.)'" && ret=0 diff --git a/Completion/Linux/Command/_strace b/Completion/Linux/Command/_strace index ba777d68a..695e800c7 100644 --- a/Completion/Linux/Command/_strace +++ b/Completion/Linux/Command/_strace @@ -47,18 +47,18 @@ _sys_calls () { _sets () { _alternative \ - 'special:Special values:(all none)' \ + 'special:special values:(all none)' \ 'calls::_sys_calls' } _traces () { local expl - traces=('file:Trace all system calls which take a file name as an argument' - 'process:Trace all system calls which involve process management' - 'network:Trace all the network related system calls' - 'signal:Trace all signal related system calls' - 'ipc:Trace all IPC related system calls' - 'desc:Trace all file descriptor related system calls') + traces=('file:trace all system calls which take a file name as an argument' + 'process:trace all system calls which involve process management' + 'network:trace all the network related system calls' + 'signal:trace all signal related system calls' + 'ipc:trace all IPC related system calls' + 'desc:trace all file descriptor related system calls') compset -P '*,' _describe -t traces 'Related system calls' traces -qS , } @@ -71,43 +71,43 @@ _traces_sets () { _expression () { _values -S = "Qualifying expression" \ - 'trace[Trace specified set of system calls only]:system calls:_traces_sets' \ - 'abbrev[Abbreviate the output from printing each member of large structures]:system calls:_sets' \ - 'verbose[Dereference structures for the specified set of system calls]:system calls:_sets' \ - 'raw[Print raw, undecoded arguments for the specified set of system calls]:system calls:_sets' \ - 'signal[Trace only the specified subset of signals]:signal:{compset -P "*,"; _signals -s -qS ,}' \ - 'read[Perform a full hex and ASCII dump of all the data read from listed file descriptors]:file descriptors:{compset -P "*,"; _file_descriptors -qS ,}' \ - 'write[Perform a full hex and ASCII dump of all the data written to listed file descriptors]:file descriptors:{compset -P "*,"; _file_descriptors -qS ,}' + 'trace[trace specified set of system calls only]:system calls:_traces_sets' \ + 'abbrev[abbreviate the output from printing each member of large structures]:system calls:_sets' \ + 'verbose[dereference structures for the specified set of system calls]:system calls:_sets' \ + 'raw[print raw, undecoded arguments for the specified set of system calls]:system calls:_sets' \ + 'signal[trace only the specified subset of signals]:signal:{compset -P "*,"; _signals -s -qS ,}' \ + 'read[perform a full hex and ASCII dump of all the data read from listed file descriptors]:file descriptors:{compset -P "*,"; _file_descriptors -qS ,}' \ + 'write[perform a full hex and ASCII dump of all the data written to listed file descriptors]:file descriptors:{compset -P "*,"; _file_descriptors -qS ,}' if [[ -z "$words[CURRENT]" || -n "${words[CURRENT]:#*=*}" ]]; then _traces_sets fi } _arguments \ - '()-c[Count time, calls, and errors for each system call and report a summary]' \ - -d'[Show some debugging output of strace itself on the standard error]' \ - -f'[Trace child processes as they are created by currently traced processes]' \ - -ff'[Write each process trace to <filename>.<pid> (when using -o <filename>]' \ - '(-c -d -f -ff -i -q -r -t -tt -ttt -T -v -V -x -xx -a -e -o -O -p -s -S -u -E)-h[Print help]' \ - -i'[Print the instruction pointer at the time of the system call]' \ - -q'[Suppress messages about attaching, detaching etc.]' \ - -r'[Print a relative timestamp upon entry to each system call]' \ - '(-ttt)-t[Prefix each line of the trace with the time of day]' \ - '(-ttt -tt)-tt[Prefix each line of the trace with the time of day including the microseconds]' \ - '(-tt -t)-ttt[Prefix each line of the trace with the number of seconds and microseconds since the epoch]' \ - -T'[Show the time spent in system calls]' \ - -v'[Print unabbreviated versions of environment, stat, termios, etc. calls]' \ - '(-c -d -f -ff -h -i -q -r -t -tt -ttt -T -v -x -xx -a -e -o -O -p -s -S -u -E)-V[Print the version number of strace]' \ - '(-xx)-x[Print all non-ASCII strings in hexadecimal string format]' \ - '(-x)-xx[Print all strings in hexadecimal string format]' \ - -a'[Align return values in a specific column (default 40)]:column number' \ - '*-e[Select events to trace or how to trace]:system call:_expression' \ - '-o[Write the trace output to the file]:output file:_files' \ - '-O[Overhead for tracing system calls]:overhead microseconds' \ - '(:)-p[Attach to the process with specified process ID and begin tracing]:Process ID:_pids' \ - '-s[Specify the maximum string size to print (default 32)]:maximum string size' \ - '-S[Sort the output of the histogram (-c option) by the specified criterion]:sort by:(time calls name nothing)' \ - '-u[Run as specified user]:user:_users' \ - '*-E[Remove variable from the inherited list of environment or define a value]:variable:_printenv' \ + '()-c[count time, calls, and errors for each system call and report a summary]' \ + -d'[show some debugging output of strace itself on the standard error]' \ + -f'[trace child processes as they are created by currently traced processes]' \ + -ff'[write each process trace to <filename>.<pid> (when using -o <filename>]' \ + '(-c -d -f -ff -i -q -r -t -tt -ttt -T -v -V -x -xx -a -e -o -O -p -s -S -u -E)-h[print help]' \ + -i'[print the instruction pointer at the time of the system call]' \ + -q'[suppress messages about attaching, detaching etc.]' \ + -r'[print a relative timestamp upon entry to each system call]' \ + '(-ttt)-t[prefix each line of the trace with the time of day]' \ + '(-ttt -tt)-tt[prefix each line of the trace with the time of day including the microseconds]' \ + '(-tt -t)-ttt[prefix each line of the trace with the number of seconds and microseconds since the epoch]' \ + -T'[show the time spent in system calls]' \ + -v'[print unabbreviated versions of environment, stat, termios, etc. calls]' \ + '(-c -d -f -ff -h -i -q -r -t -tt -ttt -T -v -x -xx -a -e -o -O -p -s -S -u -E)-V[print the version number of strace]' \ + '(-xx)-x[print all non-ASCII strings in hexadecimal string format]' \ + '(-x)-xx[print all strings in hexadecimal string format]' \ + -a'[align return values in a specific column (default 40)]:column number' \ + '*-e[select events to trace or how to trace]:system call:_expression' \ + '-o[write the trace output to the file]:output file:_files' \ + '-O[overhead for tracing system calls]:overhead microseconds' \ + '(:)-p[attach to the process with specified process ID and begin tracing]:process ID:_pids' \ + '-s[specify the maximum string size to print (default 32)]:maximum string size' \ + '-S[sort the output of the histogram (-c option) by the specified criterion]:sort by:(time calls name nothing)' \ + '-u[run as specified user]:user:_users' \ + '*-E[remove variable from the inherited list of environment or define a value]:variable:_printenv' \ '(-):command name: _command_names -e' \ '*::arguments:_normal' |