37913: add additional completers and _zpool improvement

8 files changed, 262 insertions, 0 deletions

diff --git a/Completion/BSD/Command/_gstat b/Completion/BSD/Command/_gstat
new file mode 100644
index 000000000..55b7db74d
--- /dev/null
+++ b/Completion/BSD/Command/_gstat
@@ -0,0 +1,11 @@
+#compdef gstat
+
+_arguments -s -w : \
+  '-a[only display providers that are at least 0.1% busy]' \
+  '-b[batch mode]' \
+  '-c[enable the display geom(4) consumers]' \
+  '-d[enable the display delete operations]' \
+  '-f[filter by regex]:regex' \
+  '-o[enable the display for other operations]' \
+  '-I[display refresh rate]:interval' \
+  '-p[only display physical providers]'
diff --git a/Completion/BSD/Command/_sysrc b/Completion/BSD/Command/_sysrc
new file mode 100644
index 000000000..d8bc4ef0e
--- /dev/null
+++ b/Completion/BSD/Command/_sysrc
@@ -0,0 +1,77 @@
+#compdef sysrc
+_sysrc_caching_policy() {
+  local -a oldp
+  oldp=( "$1"(Nm+1) )
+  (( $#oldp ))
+}
+
+
+_sysrc() {
+  _arguments -A '-*' : \
+    '-c[check only, return success if vars are set]' \
+    '-d[print variable(s) description]' \
+    '-D[print default value(s) only]' \
+    '-e[print variables as sh(1) compatible syntax]' \
+    '*-f[operate on specified file(s), not \`rc_conf_files'\'']: : _files' \
+    '-F[print only the last rc.conf(5) file each directive is in]' \
+    '-h[print short usage message]' \
+    '--help[print full usage message]' \
+    '-i[ignore unknown variables]' \
+    '-j[jail to operate within]:jails:_jails' \
+    '-n[print only variable values]' \
+    '-N[print only variable names]' \
+    '-q[quiet mode]' \
+    '-R[specify an alternative root]:alternative root:_files -/' \
+    '-v[verbose mode]' \
+    '--version[print version information]' \
+    '-x[remove specified variables from specified file(s)]' \
+    '*:configuration variable:->confvars' \
+    - set1 \
+    '-a[list all non-default configuration variables]' \
+    - set2 \
+    '-A[list all configuration variables]'
+
+  if [[ $state  == confvars ]]; then
+    local k v opt curcontext="${curcontext%:*}:values"; local -a rc_conf_vars
+    if [[ -prefix *=* ]]; then
+      # do you really want to go down this hole?
+      _message -e values value
+    else
+      if zstyle -T ":completion:${curcontext%:*}:values" verbose; then
+        opt=d
+      else
+        opt=N
+      fi
+      
+      if ! zstyle -m ":completion:${curcontext%:*}:values" cache-policy '*'; then
+        zstyle ":completion:${curcontext%:*}:values" cache-policy _sysrc_caching_policy
+      fi
+
+      if _cache_invalid sysrc/rc_conf_vars ||
+         ! _retrieve_cache sysrc/rc_conf_vars; then
+ 
+        _call_program sysrc-cmd sysrc -A$opt | while read -r k v; do
+          [[ $k = DEBUG* ]] && continue
+          if [[ -z $v ]]; then
+            rc_conf_vars+=( ${k%:} )
+          else
+            rc_conf_vars+=( "${k%:}[${${v//]/\\]}//:/\\:}]" )
+          fi
+          v=
+        done
+
+        _store_cache sysrc/rc_conf_vars rc_conf_vars
+      fi
+
+      if (( $#rc_conf_vars )); then
+        if [[ $opt == N ]]; then
+          _values -w -C variable ${^rc_conf_vars%%\[*}'::value'
+        else
+          _values -w -C variable ${^rc_conf_vars}'::value'
+        fi
+      fi
+    fi
+  fi
+}
+
+_sysrc "$@"
diff --git a/Completion/Linux/Command/_gpasswd b/Completion/Linux/Command/_gpasswd
new file mode 100644
index 000000000..9b4bedec6
--- /dev/null
+++ b/Completion/Linux/Command/_gpasswd
@@ -0,0 +1,21 @@
+#compdef gpasswd
+local curcontext=$curcontext state state_descr line
+typeset -A opt_args
+
+_arguments -C -w -s \
+  '(-a --add -d --delete)'{-a,--add}'[add user to group]: : _users' \
+  '(-d --delete -a --add)'{-d,--delete}'[remove user from group]: : _users' \
+  '(-h --help)'{-h,--help}'[display help]' \
+  '(-Q --root)'{-Q,--root}'[directory to chroot into]: : _files -/' \
+  '(-r --remove-password)'{-r,--remove-password}'[remove the group password]' \
+  '(-R --restrict)'{-R,--restrict}'[restrict access to GROUP to its members]' \
+  '(-M --members -A --administrators)'{-M,--members}'[set the list of members of GROUP]: :->users' \
+  '(-A --administrators -M --members)'{-A,--administrators}'[set the list of admins for GROUP]: :->users' \
+  '1: : _groups'
+
+if [[ $state == users ]]; then
+  local -a ignore
+  compset -P '*,'; compset -S ',*'
+  ignore=( ${(s:,:)IPREFIX} ${(s:,:)ISUFFIX} )
+  _users -F ignore -qS ,
+fi
diff --git a/Completion/Linux/Command/_htop b/Completion/Linux/Command/_htop
new file mode 100644
index 000000000..9a6133a86
--- /dev/null
+++ b/Completion/Linux/Command/_htop
@@ -0,0 +1,10 @@
+#compdef htop
+
+_arguments -S : \
+  '(-d --delay)'{-d+,--delay=}'[update frequency]:duration' \
+  '(-C --no-color --no-colour)'{-C,--no-colo{,u}r}'[monochrome mode]' \
+  '(-h --help)'{-h,--help}'[display help]' \
+  '(-p --pid)'{-p+,--pid=}'[show given pids]: : _sequence -n ${$(</proc/sys/kernel/pid_max)\:-32768} _pids' \
+  '(-s --sort-key)'{-s+,--sort-key=}'[sort by key]:key:( ${(f)"$($service --sort-key help)"} )' \
+  '(-u --user)'{-u+,--user=}'[show processes of user]: : _users' \
+  '(-v --version)'{-v,--version}'[print version information]'
diff --git a/Completion/Linux/Command/_kpartx b/Completion/Linux/Command/_kpartx
new file mode 100644
index 000000000..11c614c01
--- /dev/null
+++ b/Completion/Linux/Command/_kpartx
@@ -0,0 +1,14 @@
+#compdef kpartx
+
+_arguments -s -w : \
+  '-a[add partition mappings]' \
+  '-r[read-only partition mappings]' \
+  '-d[delete partition mappings]' \
+  '-u[update partition mappings]' \
+  '-l[list partition mappings]' \
+  '-p[set device name-partition number delimiter]' \
+  '-f[force creation of mappings]' \
+  '-g[force GUID partition table]' \
+  '-v[Operate verbosely]' \
+  '-s[don'\''t return until the partitions are created]' \
+  '1: : _files'
diff --git a/Completion/Unix/Command/_top b/Completion/Unix/Command/_top
new file mode 100644
index 000000000..10c0e3481
--- /dev/null
+++ b/Completion/Unix/Command/_top
@@ -0,0 +1,101 @@
+#compdef top
+
+local specs fields
+
+case $OSTYPE in
+  *linux*)
+    fields=(
+      '%CPU:CPU usage' '%MEM:memory usage (res)' 'CGROUPS:control groups'
+      'CODE:code size' 'COMMAND:Commane name/line' 'DATA:data + stack size'
+      'ENVIRON:environment variables' 'Flags:task flags' 'GID:group id'
+      'GROUP:group name' 'NI:nice value' 'P:last used CPU (SMP)'
+      'PGRP:process group id' 'PID:process id' 'PPID:parent pid' 'PR:priority'
+      'RES:resident memory size' 'RUID:real user id' 'RUSER:real uid'
+      'S:process status' 'SHR:shared memory size' 'SID:session id'
+      'SUID:saved uid' 'SUPGIDS:supplementary gids'
+      'SUPGRPS:supplementary group names' 'SUSER:saved username'
+      'SWAP:swapped sized' 'TGID:thread gid' 'TIME:CPU time'
+      'TIME+:CPU time (hundredths)' 'TPGID:TTY gid' 'TTY:controlling TTY'
+      'UID:user id' 'USED:memory in use' 'USER:user name'
+      'VIRT:virtual memory size' 'WCHAN:sleeping in function'
+      'nDRT:dirty pages count' 'nMaj:major page count' 'nMin:minor page count'
+      'nTH:number of threads' 'nsIPC:IPC namespace' 'nsMNT:MNT namespace'
+      'nsNET:NET namespace' 'nsPID:PID namespace' 'nsUSER:USER namespace'
+      'nsUTS:UTS namespace' 'vMj:major page fault count delta'
+      'vMn:minor page fault count delta'
+    )
+    specs=(
+      '(-v -h)-'{h,v}'[show version and usage]'
+      '-b[batch mode]'
+      '-c[command line/program name toggle]'
+      '-d[delay time interval]:interval'
+      '-H[threads mode operation]'
+      '-i[idle process toggle]'
+      '-n[number of iterations]:number of iterations'
+      '-o[override sort field]:fieldname:(( $fields ))'
+      '-O[output field names]'
+      '*-p[monitor pids]: :_pids'
+      '-s[secure mode operation]'
+      '-S[cumulative time toggle]'
+      '(-U)-u[effective user filter mode]: :_users'
+      '(-u)-U[user filter mode]: :_users'
+      '-w[output width override]:number'
+    );;
+  freebsd*)
+    specs=(
+      '-C[CPU display mode]'
+      '-S[show system processes]'
+      '-a[display command names via argv]'
+      '-b[batch mode]'
+      '-H[display individual threads]'
+      '-i[interactive mode]'
+      '-I[do not display idle processes]'
+      '-j[display the jail ID]'
+      '-t[do not display the top process]'
+      '-m+[statistic type]:type:(( cpu\:default io ))'
+      '-n[non-interactive mode]'
+      '-P[per-cpu CPU usage statistics]'
+      '-q[renice top to -20]'
+      '-u[do not translate uid to name]'
+      '-v[write version number]'
+      '-z[no not display system idle process]'
+      '-d+[number of iterations]:count:'
+      '-s+[set delay interval]:interval:'
+      '-o+[sort process display by field]:field:(
+        cpu size res time pri threads total read 
+        write fault vcsw ivcsw jid pid
+      )'
+      '-J+[show processes owned by jail]:jail:_jails -0'
+      '-U+[show processes owned by username]: :_users'
+      '1: : _message "top number of processes"'
+    );;
+  openbsd*)
+    specs=(
+      '-1[combine CPU statistic into one line]'
+      '-b[batch mode]'
+      '-C[show command arguments as well and process name]'
+      '-d[number of iterations]:number of iterations'
+      '-g[filter processes by string]:string'
+      '-H[display process threads]'
+      '-I[do not display idle processes]'
+      '-i[interactive mode]'
+      '-n[non-interactive mode]'
+      '-o[sort display by field]:field:(
+        cpu size res time pri pid command
+      )'
+      '-p[filter by pid]: :_pids'
+      '-q[renice top to -20]'
+      '-S[show system processes]'
+      '-s[delay time interval]:interval'
+      '-U[filter processes by user]: :_users -M "L\:|-="'
+      '-u[do not map uid to usernames]'
+      '1: : _message "top number of processes"'
+    );;
+esac
+
+if (( $#specs )); then
+  _arguments -s -w : "$specs[@]"
+  return
+fi
+
+_normal
diff --git a/Completion/Unix/Command/_tput b/Completion/Unix/Command/_tput
new file mode 100644
index 000000000..a3b4e949c
--- /dev/null
+++ b/Completion/Unix/Command/_tput
@@ -0,0 +1,18 @@
+#compdef tput
+local -a args
+
+case $OSTYPE in
+  *linux*)
+    args=(
+      - set1
+      '-S[allows more than one capability per invocation of tput]'
+      - set2
+      '-V[reports the version of ncurses used for tput]'
+    )
+esac
+      
+_arguments : \
+  $args - set3 \
+  '(-S -V)-T+[terminal type]:terminal type:_terminals' \
+  '1:terminal capabilities:( init reset longname ${(k)terminfo} )' \
+  '*:capability parameters:{ [[ $words[1] != (init|reset|longname) ]] && _message parameter }'
diff --git a/Completion/Unix/Command/_zpool b/Completion/Unix/Command/_zpool
index 53022db8a..950266896 100644
--- a/Completion/Unix/Command/_zpool
+++ b/Completion/Unix/Command/_zpool
@@ -13,6 +13,10 @@ _zpool() {
 		upgrade history get set split help
 	)
 
+	if [[ $implementation = openzfs ]] && [[ $OSTYPE != solaris* ]]; then
+		subcmds+=(labelclear)
+	fi
+
 	versions=(
 		${${${(M)"${(f)$(_call_program versions zpool upgrade -v)}":#[[:space:]]#<->*}##[[:space:]]}%%[[:space:]]*}
 	)
@@ -164,6 +168,12 @@ _zpool() {
 			'::count:'
 		;;
 
+	(labelclear)
+		_arguments -A "-*" \
+			'-f[treat exported or foreign devices as inactive]' \
+			'*:virtual device:_files'
+		;;
+
 	(status)
 		_arguments -A "-*" \
 			'-l[Display configuration in /dev/chassis location form]' \