diff options
author | Paul Ackersviller <packersv@users.sourceforge.net> | 2007-03-18 23:36:21 +0000 |
---|---|---|
committer | Paul Ackersviller <packersv@users.sourceforge.net> | 2007-03-18 23:36:21 +0000 |
commit | 52e0ae261aca931d9aa498453d65f2444d415d2b (patch) | |
tree | b674d031944d2858e67183f9024f2577ddcbc299 /Completion | |
parent | 4beedf221eee5a8f4ae659fccd6f36c96c66cc69 (diff) | |
download | zsh-52e0ae261aca931d9aa498453d65f2444d415d2b.tar.gz zsh-52e0ae261aca931d9aa498453d65f2444d415d2b.tar.xz zsh-52e0ae261aca931d9aa498453d65f2444d415d2b.zip |
Take trunk version to get workers/21648 and workers/22812.
Diffstat (limited to 'Completion')
-rw-r--r-- | Completion/Unix/Command/_rsync | 98 |
1 files changed, 67 insertions, 31 deletions
diff --git a/Completion/Unix/Command/_rsync b/Completion/Unix/Command/_rsync index dd1160069..6e80dd17f 100644 --- a/Completion/Unix/Command/_rsync +++ b/Completion/Unix/Command/_rsync @@ -91,53 +91,77 @@ _rsync_files() { _arguments -s \ '*'{-v,--verbose}'[increase verbosity]' \ - '--bwlimit=[limit I/O bandwidth]:KBytes per second:' \ - '--port=[specify alternate port number]:port:' \ - '--address=[bind to the specified address]:address:_hosts' \ + {--no-v,--no-verbose}'[turn off --verbose]' \ + '--bwlimit=[limit I/O bandwidth]:KBytes per second' \ + '--port=[specify alternate port number]:port:(873)' \ + '--address=[bind to the specified address]:bind address:_bind_addresses' \ + '(-T --temp-dir)'{-T,--temp-dir=}'[create temporary files in specified directory]:directory:_directories' \ + '--sockopts=[specify custom TCP options]' \ '(-4 -6 --ipv4 --ipv6)'{-4,--ipv4}'[prefer IPv4]' \ '(-4 -6 --ipv4 --ipv6)'{-6,--ipv6}'[prefer IPv6]' \ - '(-)'{-h,--help}'[display help information]' \ - daemon \ + '(-)'{-h,--help}'[display help information]' \ '--config=[specify alternate rsyncd.conf file]:file:_files' \ '--daemon[run as an rsync daemon]' \ + '--detach[detach from the parent]' \ '--no-detach[do not detach from the parent]' \ - client \ + '(-)--help[display help information]' \ '*: :_rsync_files' \ '(-q --quiet)'{-q,--quiet}'[suppress non-error messages]' \ + '--no-motd[suppress the daemon message-of-the-day output]' \ '(-c --checksum)'{-c,--checksum}'[skip based on checksums, not mod-time & size]' \ '(-a --archive)'{-a,--archive}'[archive mode; same as -rlptgoD (no -H)]' \ '(-r --recursive)'{-r,--recursive}'[recurse into directories]' \ - '(-R --relative --no-relative)'{-R,--relative}'[use relative path names]' \ - '(-R --relative)--no-relative[turn off --relative]' \ + {--no-r,--no-recursive}'[turn off --recursive]' \ + '(-R --relative)'{-R,--relative}'[use relative path names]' \ + {--no-R,--no-relative}'[turn off --relative]' \ '--no-implied-dirs[do not send implied dirs with --relative]' \ '(-b --backup)'{-b,--backup}'[make backups into hierarchy at indicated directory]' \ '--backup-dir=[make backups into specified directory]:backup directory:_directories' \ - '--suffix=[set backup suffix]:suffix' \ + '--suffix=[set backup suffix]:suffix:(\~)' \ '(-u --update)'{-u,--update}'[skip files that are newer on the receiving side]' \ '--inplace[update destination files in-place]' \ + '--append[append data onto shorter files]' \ '(-d --dirs)'{-d,--dirs}'[transfer directories without recursing]' \ + {--no-d,--no-dirs}'[turn off --dirs]' \ '(-l --links)'{-l,--links}'[copy symlinks as symlinks]' \ + {--no-l,--no-links}'[turn off --links]' \ '(-L --copy-links)'{-L,--copy-links}'[transform symlinks into referent file/dir]' \ + '(-k --copy-dirlinks)'{-k,--copy-dirlinks}'[transform a symlink to a dir into referent dir]' \ '--copy-unsafe-links[only "unsafe" symlinks are transformed]' \ '--safe-links[ignore symlinks that point outside the source tree]' \ '(-H --hard-links)'{-H,--hard-links}'[preserve hard links]' \ + {--no-H,--no-hard-links}'[turn off --hard-links]' \ '(-K --keep-dirlinks)'{-K,--keep-dirlinks}'[treat symlinked dir on receiver as dir]' \ - '(-p --perms)'{-p,--perms}'[preserve permissions]' \ + '(-p --perms -E --executability)'{-p,--perms}'[preserve permissions]' \ + {--no-p,--no-perms}'[turn off --perms]' \ + '(-E --executability -p --perms)'{-E,--executability}'[preserve executability]' \ '(-o --owner)'{-o,--owner}'[preserve owner]' \ + {--no-o,--no-owner}'[turn off --owner]' \ '(-g --group)'{-g,--group}'[preserve group]' \ - '(-D --devices)'{-D,--devices}'[preserve devices]' \ + {--no-g,--no-group}'[turn off --group]' \ + '(--devices --specials)-D[same as --devices --specials]' \ + '(-D)--devices[preserve devices]' \ + '--no-devices[turn off --devices]' \ + '(-D)--specials[preserve special files]' \ + '--no-specials[turn off --specials]' \ + '--no-D[turn off --devices and --specials]' \ '(-t --times)'{-t,--times}'[preserve times]' \ + {--no-t,--no-times}'[turn off --times]' \ '(-O --omit-dir-times)'{-O,--omit-dir-times}'[omit directories when preserving times]' \ + '--chmod[change destination permissions]:mods' \ '(-S --sparse)'{-S,--sparse}'[handle sparse files efficiently]' \ '(-n --dry-run)'{-n,--dry-run}'[show what would have been transferred]' \ - '(-W --whole-file --no-whole-file)'{-W,--whole-file}'[copy files whole (without rsync algorithm)]' \ - '(-W --whole-file)--no-whole-file[always use incremental rsync algorithm]' \ + '(-W --whole-file)'{-W,--whole-file}'[copy files whole (without rsync algorithm)]' \ + {--no-W,--no-whole-file}'[turn off --whole-file]' \ '(-x --one-file-system)'{-x,--one-file-system}'[do not cross filesystem boundaries]' \ '(-B --block-size)'{-B,--block-size=}'[force a fixed checksum block-size]:block size' \ '(-e --rsh)'{-e,--rsh=}'[specify the remote shell to use]:remote-shell command:(rsh ssh)' \ - '--rsync-path=[specify path to rsync on the remote machine]:remote command:' \ - '--existing[only update files that already exist on receiving side]' \ + '--rsync-path=[specify path to rsync on the remote machine]:remote command' \ '--ignore-existing[ignore files that already exist on receiving side]' \ + '(--existing --ignore-non-existing)'{--existing,--ignore-non-existing}'[ignore files that do not exist on receiving side]' \ + '--remove-source-files[synchronized files are removed from sending side]' \ '--remove-sent-files[transferred files/symlinks are removed from sending side]' \ '(--delete-before --delete-during --delete-after)--del[an alias for --delete-during]' \ '--delete[delete files that do not exist on the sending side]' \ @@ -147,42 +171,54 @@ _arguments -s \ '--delete-excluded[also delete excluded files on the receiving side]' \ '--ignore-errors[delete even if there are I/O errors]' \ '--force[force deletion of directories even if not empty]' \ - '--max-delete=[do not delete more than NUM files]:number:' \ - '--max-size=[do not transfer any file larger than specified size]:number:' \ + '--max-delete=[do not delete more than NUM files]:number' \ + '--max-size=[do not transfer any file larger than specified size]:number' \ + '--min-size=[do not transfer any file smaller than specified size]:number' \ '(-P)--partial[keep partially transferred files]' \ - '--partial-dir=[put a partially transferred file into specified directory]:directory:_files -/' \ + '--no-partial[turn off --partial]' \ + '--partial-dir=[put a partially transferred file into specified directory]:directory:_directories' \ + '--super[receiver attempts super-user activities]' \ + '--no-super[receiver performs normal-user activities]' \ '--delay-updates[put all updated files into place at end of transfer]' \ + '(-m --prune-empty-dirs)'{-m,--prune-empty-dirs}'[prune empty directory chains from file-list]' \ '--numeric-ids[do not map uid/gid values by user/group name]' \ - '--timeout=[set I/O timeout in seconds]:seconds:' \ + '--timeout=[set I/O timeout in seconds]:seconds' \ '(-I --ignore-times)'{-I,--ignore-times}'[do not skip files that match in size and mod-time]' \ '--size-only[skip files that match in size]' \ - '--modify-window=[compare mod-times with reduced accuracy]:seconds:' \ - '(-T --temp-dir)'{-T,--temp-dir=}'[create temporary files in specified directory]:directory:_files -/' \ + '--modify-window=[compare mod-times with reduced accuracy]:seconds' \ '(-y --fuzzy)'{-y,--fuzzy}'[find similar file for basis if no destination file]' \ - '(--copy-dest --link-dest)*--compare-dest=[also compare destination files relative to specified directory]:directory:_files -/' \ - '(--compare-dest --link-dest)*--copy-dest=[like --compare-dest, but also includes copies of unchanged files]:directory:_files -/' \ - '(--compare-dest --copy-dest)*--link-dest=[hardlink to files in specified directory hierarchy when unchanged]:directory:_files -/' \ + '(--copy-dest --link-dest)*--compare-dest=[also compare destination files relative to specified directory]:directory:_directories' \ + '(--compare-dest --link-dest)*--copy-dest=[like --compare-dest, but also includes copies of unchanged files]:directory:_directories' \ + '(--compare-dest --copy-dest)*--link-dest=[hardlink to files in specified directory hierarchy when unchanged]:directory:_directories' \ '(-z --compress)'{-z,--compress}'[compress file data during the transfer]' \ + '--compress-level=[explicitly set compression level]:number' \ '(-C --cvs-exclude)'{-C,--cvs-exclude}'[auto-ignore files the same way CVS does]' \ - '*'{-f,--filter=}'[add a file-filtering rule]:rule:' \ + '*'{-f,--filter=}'[add a file-filtering rule]:rule' \ '*-F[same as --filter="dir-merge /.rsync-filter", repeated: --filter="- .rsync-filter"]' \ '--exclude-from=[read exclude patterns from specified file]:file:_files' \ - '*--exclude=[exclude files matching pattern]:pattern:' \ + '*--exclude=[exclude files matching pattern]:pattern' \ '--include-from=[read include patterns from specified file]:file:_files' \ - '*--include=[do not exclude files matching pattern]:pattern:' \ + '*--include=[do not exclude files matching pattern]:pattern' \ '--files-from=[read list of source-file names from specified file]:file:_files' \ '(-0 --from0)'{-0,--from0}'[all *-from file lists are delimited by nulls]' \ '--version[print version number]' \ + '(-h --human-readable --si)'{-h,--human-readable}'[output numbers in a human-readable format]' \ + '(-h --human-readable)--si[like --human-readable, but use powers of 1000]' \ '--blocking-io[use blocking I/O for the remote shell]' \ - '--no-blocking-io[turn off blocking I/O when it is the default]' \ + '--no-blocking-io[turn off --blocking-io]' \ '--stats[give some file-transfer stats]' \ + '(-8 --8-bit-output)'{-8,--8-bit-output}'[leave high-bit chars unescaped in output]' \ '(-P)--progress[show progress during transfer]' \ + '--no-progress[turn off --progress]' \ '(--partial --progress)-P[same as --partial --progress]' \ '(-i --itemize-changes)'{-i,--itemize-changes}'[output a change-summary for all updates]' \ - '--log-format=[log file-transfers using specified format]:format:' \ + '--log-format=[deprecated version of --out-format]' \ + '--out-format=[output updates using specified format]:format' \ + '--log-file-format=[log updates using specified format]:format' \ + '--log-file=[log what rsync is doing to the specified file]:file:_files' \ '--password-file=[read password from file]:file:_files' \ '--list-only[list the files instead of copying them]' \ - '--write-batch=[write a batched update to the specified file]:file:' \ - '--only-write-batch=[like --write-batch but w/o updating destination]:file:' \ - '--protocol=[force an older protocol version to be used]:number:' \ - '--read-batch=[read a batched update from the specified file]:file:' + '(--only-write-batch)--write-batch=[write a batched update to the specified file]:file:_files' \ + '(--write-batch)--only-write-batch=[like --write-batch but w/o updating destination]:file:_files' \ + '--protocol=[force an older protocol version to be used]:number' \ + '--read-batch=[read a batched update from the specified file]:file:_files' |