users/12985, users/12986, users/12988: Tomasz Pala:

some new and updated completions

3 files changed, 296 insertions, 0 deletions

diff --git a/Completion/Linux/Command/.distfiles b/Completion/Linux/Command/.distfiles
index ff98cca82..f3ef3cadf 100644
--- a/Completion/Linux/Command/.distfiles
+++ b/Completion/Linux/Command/.distfiles
@@ -4,7 +4,9 @@ _acpi
 _analyseplugin
 _acpitool
 _brctl
+_ethtool
 _fusermount
+_ipset
 _iptables
 _iwconfig
 _losetup
diff --git a/Completion/Linux/Command/_ethtool b/Completion/Linux/Command/_ethtool
new file mode 100644
index 000000000..50ab9f741
--- /dev/null
+++ b/Completion/Linux/Command/_ethtool
@@ -0,0 +1,141 @@
+#compdef ethtool
+
+local -a cmds
+
+if [[ $CURRENT -ge 4 ]]; then
+	case $words[CURRENT-1]; in
+	  rx|tx)
+		if [[ $words[2] = '-G' ]] && _message -e n 'number of ring entries' || _wanted -x onoff expl 'enabled' compadd off on
+	  ;;
+	  autoneg|adaptive-rx|adaptive-tx|raw|sg|tso)
+		_wanted -x onoff expl 'enabled' compadd off on
+	  ;;
+	  rx-usecs|rx-frames|rx-usecs-irq|rx-frames-irq|tx-usecs|tx-frames|tx-usecs-irq|tx-frames-irq|stats-block-usecs|pkt-rate-low|rx-usecs-low|rx-frames-low|tx-usecs-low|tx-frames-low|pkt-rate-high|rx-usecs-high|rx-frames-high|tx-usecs-high|tx-frames-high|sample-interval|rx-mini|rx-jumbo|offset|length|magic|value|phyad|msglvl)
+		_message -e n 'number'
+	  ;;
+	  speed)
+		_wanted -x speed expl 'speed' compadd 10 100 1000
+	  ;;
+	  duplex)
+		_wanted -x duplex expl 'duplex mode' compadd half full
+	  ;;
+	  port)
+		_wanted -x port expl 'device port' compadd tp aui bnc mii
+	  ;;
+	  xcvr)
+		_wanted -x xcvr expl 'transceiver type' compadd internal external
+	  ;;
+	  wol)
+		_values -s '' 'Wake-on-LAN options' \
+			'(d)p[Wake on phy activity]' \
+			'(d)u[Wake on unicast messages]' \
+			'(d)m[Wake on multicast messages]' \
+			'(d)b[Wake on broadcast messages]' \
+			'(d)a[Wake on ARP]' \
+			'(d)g[Wake on MagicPacket(tm)]' \
+			'(d)s[Enable SecureOn(tm) password for MagicPacket(tm)]' \
+			'(p u m b a g s)d[Disable (wake on nothing)]'
+	  ;;
+	  sopass)
+		_message -e secureon 'password - 6 bytes in ethernet MAC hex format (xx:yy:zz:aa:bb:cc)'
+	  ;;
+	  *)
+	case $words[2]; in
+	  -A)
+		_values -S ' ' -w 'pause options' \
+			'autoneg[Specify if pause autonegotiation is enabled]' \
+			'rx[Specify if RX pause is enabled]' \
+			'tx[Specify if TX pause is enabled]'
+	  ;;
+	  -C)
+		_values -S ' ' -w 'coalescing settings' \
+			'adaptive-rx' 'adaptive-tx' \
+			'rx-usecs' 'rx-frames' 'rx-usecs-irq' 'rx-frames-irq' \
+			'tx-usecs' 'tx-frames' 'tx-usecs-irq' 'tx-frames-irq' \
+			'stats-block-usecs' \
+			'pkt-rate-low' \
+			'rx-usecs-low' 'rx-frames-low' \
+			'tx-usecs-low' 'tx-frames-low' \
+			'pkt-rate-high' \
+			'rx-usecs-high' 'rx-frames-high' \
+			'tx-usecs-high' 'tx-frames-high' \
+			'sample-interval'
+	  ;;
+	  -G)
+		_values -S ' ' -w 'ring parameters' \
+			'rx[Change number of ring entries for the RX ring]' \
+			'rx-mini[Change number of ring entries for the RX Mini ring]' \
+			'rx-jumbo[Change number of ring entries for the RX Jumbo ring]' \
+			'tx[Change number of ring entries for the TX ring]'
+	  ;;
+	  -d)
+		_values -S ' ' -w 'register dump options' \
+			'raw[dump raw register data]'
+	  ;;
+	  -e)
+		_values -S ' ' -w 'EEPROM dump options' \
+			'raw[dump raw EEPROM data]' \
+			'offset[dump certain portions of the EEPROM]' \
+			'length[dump certain portions of the EEPROM]'
+	  ;;
+	  -E)
+		_values -S ' ' -w 'EEPROM values' \
+			'magic[device-specific key]' \
+			'offset[select byte]' \
+			'value[new value]'
+	  ;;
+	  -K)
+		_values -S ' ' -w 'offload options' \
+			'rx[Specify if RX checksumming is enabled]' \
+			'tx[Specify if TX checksumming is enabled]' \
+			'sg[Specify if scatter-gather is enabled]' \
+			'tso[Specify if tcp segmentation offload is enabled]'
+	  ;;
+	  -p)
+		if [[ $CURRENT -eq 4 ]] && _message -e length 'seconds'
+	  ;;
+	  -t)
+		_values -S ' ' -w 'selftest option' \
+			'(online)offline:perform full set of tests possibly causing normal operation interruption (default)]' \
+			'(offline)online:perform limited set of tests do not interrupting normal adapter operation]'
+	  ;;
+	  -s)
+		_values -S ' ' -w 'change setting' \
+			'speed[Set speed in Mb/s]' \
+			'duplex[Set full or half duplex mode]' \
+			'port[Select device port]' \
+			'autoneg[Specify if autonegotiation is enabled]' \
+			'phyad[PHY address]' \
+			'xcvr[Select transceiver type]' \
+			'wol[Set Wake-on-LAN options]' \
+			'sopass[Set the SecureOn(tm) password]' \
+			'msglvl[Set the driver message level]'
+	  ;;
+	esac
+	  ;;
+	esac
+fi
+
+cmds=(-h -a -A -c -C -g -G -i -d -e -E -k -K -p -r -S -t -s)
+
+_arguments \
+	"($cmds)1:interface:_net_interfaces" \
+	"($cmds 1)-h[shows a short help message]" \
+	"($cmds)-a[queries the specified ethernet device for pause parameter information]" \
+	"($cmds)-A[change the pause parameters of the specified ethernet device]" \
+	"($cmds)-c[queries the specified ethernet device for coalescing information]" \
+	"($cmds)-C[change the coalescing settings of the specified ethernet device]" \
+	"($cmds)-g[queries the specified ethernet device for RX/TX ring parameter information]" \
+	"($cmds)-G[change the RX/TX ring parameters of the specified ethernet device]" \
+	"($cmds)-i[queries the specified ethernet device for associated driver information]" \
+	"($cmds)-d[retrieves and prints a register dump for the specified ethernet device]" \
+	"($cmds)-e[retrieves and prints an EEPROM dump for the specified ethernet device]" \
+	"($cmds)-E[Changes EEPROM byte for the specified ethernet device]" \
+	"($cmds)-k[queries the specified ethernet device for offload information]" \
+	"($cmds)-K[change the offload parameters of the specified ethernet device]" \
+	"($cmds)-p[initiates adapter-specific action intended to identify the adapter by sight]" \
+	"($cmds)-r[restarts auto-negotiation on the specified ethernet device]" \
+	"($cmds)-S[queries the specified ethernet device for NIC- and driver-specific statistics]" \
+	"($cmds)-t[executes adapter selftest on the specified ethernet device]" \
+	"($cmds)-s[allows changing some or all settings of the specified ethernet device]" \
+	'*:' && ret=0
diff --git a/Completion/Linux/Command/_ipset b/Completion/Linux/Command/_ipset
new file mode 100644
index 000000000..36d269f2c
--- /dev/null
+++ b/Completion/Linux/Command/_ipset
@@ -0,0 +1,153 @@
+#compdef ipset
+
+local offset=0
+local -a args from_to hash cmds listopts
+
+_set_types () {
+	_values -S \  "Set type" \
+		'ipmap[Up to 65536 IP addresses]' \
+		'macipmap[Up to 65536 IP addresses with MAC]' \
+		'portmap[Up to 65536 ports]' \
+		'iphash[Hash of IP addresses]' \
+		'nethash[Hash of network addresses]' \
+		'ipporthash[Hash of IP address and port pairs]' \
+		'iptree[Tree of IP addresses, optionally with timeout]'
+}
+
+if [[ $words[2] = (-q|--quiet) ]]; then
+	offset=1
+fi
+
+_ipsets () {
+	local -a vals
+	vals=( ${${(M)${(f)"$(_call_program ipsets ipset -nL)"}%Name: *}#Name: } )
+	_describe -t ipsets "IP sets" vals
+}
+_sets () {
+	_ipsets
+	local -a vals
+	case $words[offset+2]; in
+	  -X|--destroy)
+		vals=('\:all\::remove all not referenced sets')
+	  ;;
+	  -F|--flush)
+		vals=('\:all\::flush all sets')
+	  ;;
+	  -L|--list|-nL|-sL|-nsL|-snL|-n|-s|-ns|-sn)
+		vals=('\:all\::list all sets')
+	  ;;
+	  -S|--save)
+		vals=('\:all\::save all sets')
+	esac
+	_describe -t special_values "special values" vals
+}
+
+from_to=('(--network)--from[from IP or network (with --netmask)]:IP'
+	'(--network)--to[to IP or network (with --netmask)]:IP'
+	'(--from --to)--network[network]:IP/mask'
+)
+hash=(	'--hashsize[The initial hash size (default 1024)]:hash size'
+	'--probes[Max number of tries to resolve clashing (default 8)]:probes'
+	'--resize[Ratio of increasing hash size after unsuccessful <probes> number of double-hashing]:percent'
+)
+
+case $words[offset+2]; in
+  -N|--create)
+	case $words[offset+4]; in
+	  ipmap)
+		args=(	$from_to
+			'--netmask[store network addresses instead of IP addresses]:CIDR'
+		)
+	  ;;
+	  macipmap)
+		args=(	$from_to
+			'--matchunset[Always match IP addresses which could be stored in the set but are not]'
+		)
+	  ;;
+	  portmap)
+		args=(	'--from[from port]:port:_ports'
+			'--to[to port]:port:_ports'
+		)
+	  ;;
+	  iphash)
+		args=(	$hash
+			'--netmask[store network addresses instead of IP addresses]:CIDR'
+		)
+	  ;;
+	  nethash)
+		args=(	$hash )
+	  ;;
+	  ipporthash)
+		args=(	$from_to $hash )
+	  ;;
+	  iptree)
+	  	args=(	'--timeout[Timeout value for the entries in seconds (default 0)]:timeout' )
+	  ;;
+	esac
+  ;;
+  -T|--test)
+	args=(	'(-b --binding)'{-b,--binding}'[Test wether '$words[offset+4]' points to the specified binding]:::_ipsets' )
+  ;;
+  -B|--bind)
+	args=(	'(-b --binding)'{-b,--binding}'[Value of the binding]:::_ipsets' )
+  ;;
+esac
+
+_ips () {
+	if [[ $CURRENT -eq ((offset+4)) ]]; then
+		local ips=1 default
+		local -a vals vals1 vals2 bindings
+		vals=( ${${${(f)"$(_call_program ipsets ipset -nL $words[offset+3])"}[4,-1]}//\:/\\:} )
+		for i in $vals; do
+			if [[ $i = Default\ binding\\:* ]]; then default=${i#Default binding\\: }; continue; fi
+			if [[ $i = (Header\\:*|Members\\:) ]]; then continue; fi
+			if [[ $i = 'Bindings\:' ]]; then ips=0; continue; fi
+			if (( $ips )); then vals1+=$i; else bindings+=${i/ ->/:}; fi
+		done
+		case $words[offset+2]; in
+		  -T|--test)
+			vals2=('\:default\::test default binding of the set for --binding')
+		  ;;
+		  -B|--binding)
+			vals2=('\:default\::set default binding of the set')
+		  ;;
+		  -U|--unbind)
+			vals1=()
+			vals2=('\:all\::destroy the bindings of all elements of a set')
+			if [[ -n "$default" ]]; then
+			vals2+=("\:default\::remove default binding of the set to '$default'")
+			fi
+			_describe -t ipb "IPs from $words[offset+3] set with bindings" bindings
+		  ;;
+		esac
+		_describe -t ips "IPs from $words[offset+3] set" vals1
+		_describe -t special_values "special values" vals2
+	fi
+}
+
+cmds=(-N -X -F -E -W -S -R -A -D -T -B -U -H --create --destroy --flush --rename --swap --save --restore --add --del --test --bind --unbind --help)
+listopts=(-n --numeric -s --sorted -L --list -nL -sL -nsL -snL -ns -sn)
+
+_arguments \
+	"($cmds $listopts)"{-N,--create}'[Create a set]:set name::::_set_types' \
+	"($cmds $listopts)"{-X,--destroy}'[Destroy specified set (or all if none specified)]:set name:_sets' \
+	"($cmds $listopts)"{-F,--flush}'[Flush specified set (or all if none specified)]:set name:_sets' \
+	"($cmds $listopts)"{-E,--rename}'[rename set]:current set name:_ipsets:new set name:' \
+	"($cmds $listopts)"{-W,--swap}'[swap two sets]:::_ipsets:::_ipsets' \
+	"($cmds -L --list -q --quiet -nL -sL -nsL -snL)"{-L,--list}'[List the entries and bindings for the specified set (or all if none specified)]:::_sets' \
+	"($cmds -L --list -q --quiet -n --numeric -snL -nsL -sL -ns -sn)"-nL'[List the entries and bindings for the specified set (or all if none specified) \- numeric output]:::_sets' \
+	"($cmds -L --list -q --quiet -s --sorted  -snL -nsL -nL -ns -sn)"-sL'[List the entries and bindings for the specified set (or all if none specified) \- sorted output]:::_sets' \
+	"($cmds $listopts -q --quiet)"{-nsL,-snL}'[List the entries and bindings for the specified set (or all if none specified) \- sorted numeric output]:::_sets' \
+	"($cmds $listopts)"{-S,--save}'[Save the given set (or all if none specified)]:::_sets' \
+	"($cmds $listopts)"{-R,--restore}'[Restore a saved session generated by --save from stdin]' \
+	"($cmds $listopts)"{-A,--add}'[Add an IP to a set]:::_ipsets:IP' \
+	"($cmds $listopts)"{-D,--del}'[Delete an IP from a set]:::_ipsets:::_ips' \
+	"($cmds $listopts)"{-T,--test}'[Test wether an IP is in a set or the IP points to the specified binding]:::_ipsets:::_ips' \
+	"($cmds $listopts)"{-B,--bind}'[Bind the IP in setname to to-setname]:::_ipsets:::_ips' \
+	"($cmds $listopts)"{-U,--unbind}'[Delete the binding belonging to IP in set setname]:::_ipsets:::_ips' \
+	"($cmds $listopts)"{-H,--help}'[Print help and settype specific help if settype specified]:::_set_types' \
+	"(-q --quiet $listopts)"{-q,--quiet}'[Suppress any output to stdout and stderr]' \
+	"($cmds -s --sorted  -q --quiet -sL -nsL -snL -ns -sn)"{-s,--sorted}'[Sorted output]' \
+	"($cmds -n --numeric -q --quiet -nL -nsL -snL -ns -sn)"{-n,--numeric}"[Numeric output; don't resolve host names, network names and services]" \
+	"($cmds -ns -sn  -q --quiet -nL -sL -nsL -snL -n --numeric -s --sorted)"{-ns,-sn}'[Sorted numeric output]' \
+	"$args[@]"