about summary refs log tree commit diff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* timezone parser: fix iteration over search dir pathsrofl0r2013-11-041-1/+1
| | | | try+l points to \0, so only one iteration was ever tried.
* timezone parser: fix offset to transition table in 64bit code pathrofl0r2013-11-041-1/+1
| | | | | | we need to skip to the second TZif header, which starts at skip+44, and then skip another header (20 bytes) plus the following 6 32bit values.
* fix timezone parser code crashing on 64bit sysrofl0r2013-11-041-1/+1
| | | | | | | if sizeof(time_t) == 8, this code path was missing the correct offset into the zoneinfo file, using the header magic to do offset calculations. the 6 32bit fields to be read start at offset 20.
* fix regression in inet_aton due to misinterpretation of __ipparse returnRich Felker2013-11-022-3/+3
| | | | | | | inet_aton returns a boolean success value, whereas __ipparse returns 0 on success and -1 on failure. also change the conditional in inet_addr to be consistent with other uses of __ipparse where only negative values are treated as failure.
* simplify faccessat AT_EACCESS path and eliminate resource dependenceRich Felker2013-11-011-14/+21
| | | | | | | now that we're waiting for the exit status of the child process, the result can be conveyed in the exit status rather than via a pipe. since the error value might not fit in 7 bits, a table is used to translate possible meaningful error values to small integers.
* fix faccessat AT_EACCESS path not to leave zombie processesRich Felker2013-11-011-2/+6
| | | | | | I mistakenly assumed that clone without a signal produced processes that would not become zombies; however, waitpid with __WCLONE is required to release their pids.
* POSIX conformance fix: define struct entry in search.hSzabolcs Nagy2013-10-291-8/+8
|
* fenv: fix i386 fesetround for sseSzabolcs Nagy2013-10-281-1/+1
| | | | | | i386 fenv code checks __hwcap for sse support, but in fesetround the sse code was unconditionally jumped over after the test so the sse rounding mode was never set.
* math: extensive log*.c cleanupSzabolcs Nagy2013-10-2814-583/+369
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The log, log2 and log10 functions share a lot of code and to a lesser extent log1p too. A small part of the code was kept separately in __log1p.h, but since it did not capture much of the common code and it was inlined anyway, it did not solve the issue properly. Now the log functions have significant code duplication, which may be resolved later, until then they need to be modified together. logl, log10l, log2l, log1pl: * Fix the sign when the return value should be -inf. * Remove the volatile hack from log10l (seems unnecessary) log1p, log1pf: * Change the handling of small inputs: only |x|<2^-53 is special (then it is enough to return x with the usual subnormal handling) this fixes the sign of log1p(0) in downward rounding. * Do not handle the k==0 case specially (other than skipping the elaborate argument reduction) * Do not handle 1+x close to power-of-two specially (this code was used rarely, did not give much speed up and the precision wasn't better than the general) * Fix the correction term formula (c=1-(u-x) was used incorrectly when x<1 but (double)(x+1)==2, this was not a critical issue) * Use the exact same method for calculating log(1+f) as in log (except in log1p the c correction term is added to the result). log, logf, log10, log10f, log2, log2f: * Use double_t and float_t consistently. * Now the first part of log10 and log2 is identical to log (until the return statement, hopefully this makes maintainence easier). * Most special case formulas were removed (close to power-of-two and k==0 cases), they increase the code size without providing precision or performance benefits (and obfuscate the code). Only x==1 is handled specially so in downward rounding mode the sign of zero is correct (the general formula happens to give -0). * For x==0 instead of -1/0.0 or -two54/0.0, return -1/(x*x) to force raising the exception at runtime. * Arg reduction code is changed (slightly simplified) * The thresholds for arg reduction to [sqrt(2)/2,sqrt(2)] are now consistently the [0x3fe6a09e00000000,0x3ff6a09dffffffff] and the [0x3f3504f3,0x3fb504f2] intervals for double and float reductions respectively (the exact threshold values are not critical) * Remove the obsolete comment for the FLT_EVAL_METHOD!=0 case in log2f (The same code is used for all eval methods now, on i386 slightly simpler code could be used, but we have asm there anyway) all: * Fix signed int arithmetics (using unsigned for bitmanipulation) * Fix various comments
* add legacy ftime function and sys/timeb.hRich Felker2013-10-251-0/+12
| | | | | | despite being marked legacy, this was specified by SUSv3 as part of the XSI option; only the most recent version of the standard dropped it. reportedly there's actual code using it.
* fix inet_ptonSzabolcs Nagy2013-10-231-26/+19
| | | | | | | | * parse IPv4 dotted-decimal correctly (without strtoul, no leading zeros) * disallow single leading ':' in IPv6 address * allow at most 4 hex digits in IPv6 address (according to RFC 2373) * have enough hex fields in IPv4 mapped IPv6 address * disallow leading zeros in IPv4 mapped IPv6 address
* fix __ipparse to parse the generic numbers-and-dots IPv4 format correctlySzabolcs Nagy2013-10-221-5/+12
| | | | | | | * allow at most 4 parts * bounds check the parts correctly * disallow leading whitespace and sign * check the address family before falling back to IPv6
* fix inet_aton to accept the generic "numbers-and-dots" IPv4 address formatSzabolcs Nagy2013-10-221-1/+4
|
* split inet_addr and inet_ntoa back into their own filesRich Felker2013-10-213-16/+21
| | | | | | | despite being practically deprecated, these functions are still part of the standard and thus cannot reside in a file that also contains namespace pollution. this reverts some of the changes made in commit e40f48a421a9176e3e298b5bac75f0355b219e58.
* fix return value for inet_pton in ipv6 failure casesRich Felker2013-10-191-6/+6
| | | | | in the case of input that does not match the expected form, the correct return value is 0, not -1.
* in faccessat slow path, add close-on-exec to pipe fdsRich Felker2013-10-181-1/+1
| | | | | as usual, this is needed to avoid fd leaks. as a better solution, the use of fds could possibly be replaced with mmap and a futex.
* fix uid/gid-setting error in faccessat with AT_EACCESS flagRich Felker2013-10-121-2/+2
| | | | | | | | | | | | | | | | this fixes an issue reported by Daniel Thau whereby faccessat with the AT_EACCESS flag did not work in cases where the process is running suid or sgid but without root privileges. per POSIX, when the process does not have "appropriate privileges", setuid changes the euid, not the real uid, and the target uid must be equal to the current real or saved uid; if this condition is not met, EPERM results. this caused the faccessat child process to fail. using the setreuid syscall rather than setuid works. POSIX leaves it unspecified whether setreuid can set the real user id to the effective user id on processes without "appropriate privileges", but Linux allows this; if it's not allowed, there would be no way for this function to work.
* fix errno value for getcwd when size argument is zeroRich Felker2013-10-081-1/+7
| | | | | | | | | based on patch by Michael Forney. at the same time, I've changed the if branch to be more clear, avoiding the comma operator. the underlying issue is that Linux always returns ERANGE when size is too short, even when it's zero, rather than returning EINVAL for the special case of zero as required by POSIX.
* math: fix rare underflow issue in fmaSzabolcs Nagy2013-10-073-13/+55
| | | | | the issue is described in commits 1e5eb73545ca6cfe8b918798835aaf6e07af5beb and ffd8ac2dd50f99c3c83d7d9d845df9874ec3e7d5
* math: use sqrtl if FLT_EVAL_METHOD==2 in acosh and acoshfSzabolcs Nagy2013-10-072-0/+13
| | | | this makes acosh slightly more precise around 1.0 on i386
* remove errno setting from setenv, malloc sets it correctly on oomSzabolcs Nagy2013-10-071-1/+0
|
* fix allocation sizes in regcompSzabolcs Nagy2013-10-071-4/+4
| | | | | sizeof had incorrect argument in a few places, the size was always large enough so the issue was not critical.
* add missing va_end in execl* for correcness and static code analyzersSzabolcs Nagy2013-10-073-0/+3
|
* minor vfprintf and vfwprintf changes to please static code analyzersSzabolcs Nagy2013-10-072-6/+11
| | | | add missing va_end and remove some unnecessary code.
* math: remove an unused variable from modflSzabolcs Nagy2013-10-061-1/+0
|
* slightly optimize __brk for sizeRich Felker2013-10-051-1/+1
| | | | | | | | | | there is no reason to check the return value for setting errno, since brk never returns errors, only the new value of the brk (which may be the same as the old, or otherwise differ from the requested brk, on failure). it may be beneficial to eventually just eliminate this file and make the syscalls inline in malloc.c.
* fix failure of malloc to set errno on heap (brk) exhaustionRich Felker2013-10-051-0/+1
| | | | | I wrongly assumed the brk syscall would set errno, but on failure it returns the old value of the brk rather than an error code.
* fix failure to check malloc result in setenvRich Felker2013-10-041-9/+9
|
* math: remove code duplication in erfl found by clang analyzerSzabolcs Nagy2013-10-041-13/+2
| | | | | erfl had some superflous code left around after the last erf cleanup. the issue was reported by Alexander Monakov
* math: remove a useless assignment in lgammal found by clang analyzerSzabolcs Nagy2013-10-041-2/+2
| | | | the issue was reported by Alexander Monakov
* fix invalid implicit pointer conversion in pthread_key_createRich Felker2013-10-041-1/+1
|
* fix uninitialized variable in dladdrRich Felker2013-10-041-1/+1
| | | | | the affected branch only applies for DSOs that lack standard hash table and only have the GNU hash table present.
* removed unused variable in vfwprintfRich Felker2013-10-041-2/+1
|
* fix new environment always being null with execleRich Felker2013-10-031-2/+1
| | | | | | | | the va_arg call for the argv[]-terminating null pointer was missing, so this pointer was being wrongly used as the environment pointer. issue reported by Timo Teräs. proposed patch slightly modified to simplify the resulting code.
* fix off-by-one error in getgrnam_r and getgrgid_r, clobbering gr_nameRich Felker2013-09-291-2/+2
| | | | | | | bug report and patch by Michael Forney. the terminating null pointer at the end of the gr_mem array was overwriting the beginning of the string data, causing the gr_name member to always be a zero-length string.
* fix buffer overflow in mbsrtowcsRich Felker2013-09-271-1/+1
| | | | | | | | | | | | | | | | | | | issue reported by Michael Forney: "If wn becomes 0 after processing a chunk of 4, mbsrtowcs currently continues on, wrapping wn around to -1, causing the rest of the string to be processed. This resulted in buffer overruns if there was only space in ws for wn wide characters." the original patch submitted added an additional check for !wn after the loop; to avoid extra branching, I instead just changed the wn>=4 check to wn>=5 to ensure that at least one slot remains after the word-at-a-time loop runs. this should not slow down the tail processing on real-world usage, since an extra slot that can't be processed in the word-at-a-time loop is needed for the null termination anyway.
* fix potential deadlock bug in libc-internal locking logicRich Felker2013-09-203-13/+15
| | | | | | | | | | | | | | | | | | | | if a multithreaded program became non-multithreaded (i.e. all other threads exited) while one thread held an internal lock, the remaining thread would fail to release the lock. the the program then became multithreaded again at a later time, any further attempts to obtain the lock would deadlock permanently. the underlying cause is that the value of libc.threads_minus_1 at unlock time might not match the value at lock time. one solution would be returning a flag to the caller indicating whether the lock was taken and needs to be unlocked, but there is a simpler solution: using the lock itself as such a flag. note that this flag is not needed anyway for correctness; if the lock is not held, the unlock code is harmless. however, the memory synchronization properties associated with a_store are costly on some archs, so it's best to avoid executing the unlock code when it is unnecessary.
* correct the sysconf value for RTSIG_MAXRich Felker2013-09-201-1/+2
| | | | | this is the number of realtime signals available, not the maximum signal number or total number of signals.
* fix sigemptyset and sigfillset for mipsRich Felker2013-09-162-1/+10
| | | | they were leaving junk in the upper bits.
* fix clobbering of caller's stack in mips __clone functionRich Felker2013-09-161-0/+3
| | | | | | | | | this was resulting in crashes in posix_spawn on mips, and would have affected applications calling clone too. since the prototype for __clone has it as a variadic function, it may not assume that 16($sp) is writable for use in making the syscall. instead, it needs to allocate additional stack space, and then adjust the stack pointer back in both of the code paths for the parent process/thread.
* omit CLONE_PARENT flag to clone in pthread_createRich Felker2013-09-161-1/+1
| | | | | | | | CLONE_PARENT is not necessary (CLONE_THREAD provides all the useful parts of it) and Linux treats CLONE_PARENT as an error in certain situations, without noticing that it would be a no-op due to CLONE_THREAD. this error case prevents, for example, use of a multi-threaded init process and certain usages with containers.
* use symbolic names for clone flags in pthread_createRich Felker2013-09-161-2/+5
|
* support configurable page size on mips, powerpc and microblazeSzabolcs Nagy2013-09-1512-11/+24
| | | | | | | | | | | | | | | | PAGE_SIZE was hardcoded to 4096, which is historically what most systems use, but on several archs it is a kernel config parameter, user space can only know it at execution time from the aux vector. PAGE_SIZE and PAGESIZE are not defined on archs where page size is a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE) to query it. Internally libc code defines PAGE_SIZE to libc.page_size, which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink as well. (Note that libc.page_size can be accessed without GOT, ie. before relocations are done) Some fpathconf settings are hardcoded to 4096, these should be actually queried from the filesystem using statfs.
* fix overflow in sysconf for _SC_MQ_PRIO_MAXRich Felker2013-09-141-1/+2
| | | | the value of MQ_PRIO_MAX does not fit, so it needs to use OFLOW.
* fix child stack alignment on mips cloneRich Felker2013-09-141-0/+1
| | | | | | unlike other archs, the mips version of clone was not doing anything to align the stack pointer. this seems to have been the cause for some SIGBUS crashes that were observed in posix_spawn.
* fix x86_64 lrintl asm, againRich Felker2013-09-131-2/+2
| | | | | | | | the underlying problem was not incorrect sign extension (fixed in the previous commit to this file by nsz) but that code that treats "long" as 32-bit was copied blindly from i386 to x86_64. now lrintl is identical to llrintl on x86_64, as it should be.
* do not use default when dynamic linker fails to open existing path fileRich Felker2013-09-091-0/+2
| | | | | | | | if fopen fails for a reason other than ENOENT, we must assume the intent is that the path file be used. failure may be due to misconfiguration or intentional resource-exhaustion attack (against suid programs), in which case falling back to loading libraries from an unintended path could be dangerous.
* math: remove STRICT_ASSIGN from exp2f (see previous commit)Szabolcs Nagy2013-09-061-1/+1
|
* math: remove STRICT_ASSIGN macroSzabolcs Nagy2013-09-0611-23/+13
| | | | | | | | | | | | | gcc did not always drop excess precision according to c99 at assignments before version 4.5 even if -std=c99 was requested which caused badly broken mathematical functions on i386 when FLT_EVAL_METHOD!=0 but STRICT_ASSIGN was not used consistently and it is worked around for old compilers with -ffloat-store so it is no longer needed the new convention is to get the compiler respect c99 semantics and when excess precision is not harmful use float_t or double_t or to specialize code using FLT_EVAL_METHOD
* math: support invalid ld80 representations in fpclassifySzabolcs Nagy2013-09-051-2/+4
| | | | | | | apparently gnulib requires invalid long double representations to be handled correctly in printf so we classify them according to how the fpu treats them: bad inf is nan, bad nan is nan, bad normal is nan and bad subnormal/zero is minimal normal
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-06-28 06:44:10 +0000