about summary refs log tree commit diff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* prevent fork's errno from being clobbered by atfork handlersBobby Bingham2017-11-101-3/+3
| | | | | | | If the syscall fails, errno must be set correctly for the caller. There's no guarantee that the handlers registered with pthread_atfork won't clobber errno, so we need to ensure it gets set after they are called.
* add iso-2022-jp support (decoding only) to iconvRich Felker2017-11-101-2/+45
| | | | | | | | | | this implementation aims to match the baseline defined by rfc1468 (the original mime charset definition) plus the halfwidth katakana extension included in the whatwg definition of the charset. rejection of si/so controls and newlines in doublebyte state are not currently enforced. the jis x 0201 mode is currently interpreted as having the yen sign and overline character in place of backslash and tilde; ascii mode has the standard ascii characters in those slots.
* add iconv framework for decoding stateful encodingsRich Felker2017-11-102-3/+24
| | | | | | | assuming pointers obtained from malloc have some nonzero alignment, repurpose the low bit of iconv_t as an indicator that the descriptor is a stateless value representing the source and destination character encodings.
* simplify/optimize iconv utf-8 caseRich Felker2017-11-101-4/+3
| | | | | | the special case where mbrtowc returns 0 but consumed 1 byte of input does not need to be considered, because the short-circuit for low bytes already covered that case.
* handle ascii range individually in each iconv caseRich Felker2017-11-101-2/+10
| | | | | | | short-circuiting low bytes before the switch precluded support for character encodings that don't coincide with ascii in this range. this limitation affected iso-2022 encodings, which use the esc byte to introduce a shift sequence, and things like ebcdic.
* move iconv_close to its own translation unitRich Felker2017-11-102-5/+6
| | | | | | | this is in preparation to support stateful conversion descriptors, which are necessarily allocated and thus must be freed in iconv_close. putting it in a separate TU will avoid pulling in free if iconv_close is not referenced.
* refactor iconv conversion descriptor encoding/decodingRich Felker2017-11-101-6/+20
| | | | | | | | | | this change is made to avoid having assumptions about the encoding spread out across the file, and to facilitate future change to a form that can accommodate allocted, stateful descriptors when needed. this commit should not produce any functional changes; with the compiler tested the only change to code generation was minor reordering of local variables on stack.
* fix getaddrinfo error code for non-numeric service with AI_NUMERICSERVA. Wilcox2017-11-091-1/+1
| | | | | | If AI_NUMERICSERV is specified and a numeric service was not provided, POSIX mandates getaddrinfo return EAI_NONAME. EAI_SERVICE is only for services that cannot be used on the specified socket type.
* fix mismatched type of __pthread_tsd_run_dtors weak definitionRich Felker2017-11-091-2/+2
| | | | | | | | commit a6054e3c94aa0491d7366e4b05ae0d73f661bfe2 changed this function not to take an argument, but the weak definition used by timer_create was not updated to match. reported by Pascal Cuoq.
* adjust posix_spawn dup2 action behavior to match future requirementsRich Felker2017-11-051-8/+12
| | | | | | | | | | | | | the resolution to Austin Group issue #411 defined new semantics for the posix_spawn dup2 file action in the (previously useless) case where src and dest fd are equal. future issues will require the dup2 file action to remove the close-on-exec flag. without this change, passing fds to a child with posix_spawn while avoiding fd-leak races in a multithreaded parent required a complex dance with temporary fds. based on patch by Petr Skocik. changes were made to preserve the 80-column formatting of the function and to remove code that became unreachable as a result of the new functionality.
* fix regression in glob with literal . or .. path componentRich Felker2017-10-211-3/+5
| | | | | | | | | | | | | | | | commit 8c4be3e2209d2a1d3874b8bc2b474668fcbbbac6 was written to preclude the GLOB_PERIOD extension from matching these directory entries, but also precluded literal matches. adjust the check that excludes . and .. to check whether the GLOB_PERIOD flag is in effect, so that it cannot alter behavior in cases governed by the standard, and also don't exclude . or .. in any case where normal glob behavior (fnmatch's FNM_PERIOD flag) would have included one or both of them (patterns such as ".*"). it's still not clear whether this is the preferred behavior for GLOB_PERIOD, but at least it's clear that it can no longer break applications which are not relying on quirks of a nonstandard feature.
* posix_spawn: use larger stack to cover worst-case in execvpeWill Dietz2017-10-191-1/+1
| | | | | | | | | | | execvpe stack-allocates a buffer used to hold the full path (combination of a PATH entry and the program name) while searching through $PATH, so at least NAME_MAX+PATH_MAX is needed. The stack size can be made conditionally smaller (the current 1024 appears appropriate) should this larger size be burdensome in those situations.
* in dns parsing callback, enforce MAXADDRS to preclude overflowRich Felker2017-10-181-0/+1
| | | | | | | | | | | MAXADDRS was chosen not to need enforcement, but the logic used to compute it assumes the answers received match the RR types of the queries. specifically, it assumes that only one replu contains A record answers. if the replies to both the A and the AAAA query have their answer sections filled with A records, MAXADDRS can be exceeded and clobber the stack of the calling function. this bug was found and reported by Felix Wilhelm.
* fix incorrect base name offset from nftw when pathname ends in slash(es)Rich Felker2017-10-131-3/+9
| | | | | | | | | | | | | | | the rightmost '/' character is not necessarily the delimiter before the basename; it could be a spurious trailing character on the directory name. this change does not introduce any normalization of pathnames or stripping of trailing slashes, contrary to at least glibc and perhaps other implementations; it jusst prevents their presence from breaking things. whether further changes should be made is an open question that may depend on conformance and/or application compatibility considerations. based loosely on patch by Joakim Sindholt.
* fix read-after-free type error in pthread_detachRich Felker2017-10-131-1/+2
| | | | | | | | | | | calling __unlock on t->exitlock is not valid because __unlock reads the waiters count after making the atomic store that could allow pthread_exit to continue and unmap the thread's stack and the object t points to. for now, inline the __unlock logic with an unconditional futex wake operation so that the waiters count is not needed. once __lock/__unlock have been made safe for self-synchronized destruction, we could switch back to using them.
* math: rewrite fma with mostly int arithmeticsSzabolcs Nagy2017-10-131-431/+154
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the freebsd fma code failed to raise underflow exception in some cases in nearest rounding mode (affects fmal too) e.g. fma(-0x1p-1000, 0x1.000001p-74, 0x1p-1022) and the inexact exception may be raised spuriously since the fenv is not saved/restored around the exact multiplication algorithm (affects x86 fma too). another issue is that the underflow behaviour when the rounded result is the minimal normal number is target dependent, ieee754 allows two ways to raise underflow for inexact results: raise if the result before rounding is in the subnormal range (e.g. aarch64, arm, powerpc) or if the result after rounding with infinite exponent range is in the subnormal range (e.g. x86, mips, sh). to avoid all these issues the algorithm was rewritten with mostly int arithmetics and float arithmetics is only used to get correct rounding and raise exceptions according to the behaviour of the target without any fenv.h dependency. it also unifies x86 and non-x86 fma. fmaf is not affected, fmal need to be fixed too. this algorithm depends on a_clz_64 and it required a few spurious instructions to make sure underflow exception is raised in a particular corner case. (normally FORCE_EVAL(tiny*tiny) would be used for this, but on i386 gcc is broken if the expression is constant https://gcc.gnu.org/bugzilla/show_bug.cgi?id=57245 and there is no easy portable fix for the macro.)
* for executing init array functions, use function type with prototypeRich Felker2017-10-131-1/+1
| | | | | | | | | | this is for consistency with the way it's done in in the dynamic linker, avoiding a deprecated C feature (non-prototype function types), and improving code generation. GCC unnecessarily uses the variadic calling convention (e.g. clearing rax on x86_64) when making a call where the argument types are not known for compatibility with wrong code which calls variadic functions this way. (C on the other hand is clear that such calls have undefined behavior.)
* fix access by setjmp and longjmp to __hwcap on arm built as thumb2Rich Felker2017-10-132-0/+2
| | | | | | | | | | | | | | | | this is a subtle issue with how the assembler/linker work. for the adr pseudo-instruction used to find __hwcap, the assembler in thumb mode generates a 16-bit thumb add instruction which can only represent word-aligned addresses, despite not knowing the alignment of the label. if the setjmp function is assigned a non-multiple-of-4 address at link time, the load then loads from the wrong address (the last instruction rather than the data containing the offset) and ends up reading nonsense instead of the value of __hwcap. this in turn causes the checks for floating-point/vector register sets (e.g. IWMMX) to evaluate incorrectly, crashing when setjmp/longjmp try to save/restore those registers. fix based on bug report by Felix Hädicke.
* work around incorrect EPERM from mmap syscallRich Felker2017-09-061-2/+7
| | | | | | | | | | | | | under some conditions, the mmap syscall wrongly fails with EPERM instead of ENOMEM when memory is exhausted; this is probably the result of the kernel trying to fit the allocation somewhere that crosses into the kernel range or below mmap_min_addr. in any case it's a conformance bug, so work around it. for now, only handle the case of anonymous mappings with no requested address; in other cases EPERM may be a legitimate error. this indirectly fixes the possibility of malloc failing with the wrong errno value.
* fix glob descent into . and .. with GLOB_PERIODRich Felker2017-09-061-0/+4
| | | | | | | | | GLOB_PERIOD is a gnu extension, and GNU glob does not seem to honor it except in the last path component. it's not clear whether this a bug or intentional, but it seems reasonable that it should exclude the special entries . and .. when walking. changes based on report and analysis by Julien Ramseier.
* don't treat numeric port strings as servent records in getservby*()Rich Felker2017-09-062-0/+10
| | | | | | | | | | | | | | | | some applications use getservbyport to find port numbers that are not assigned to a service; if getservbyport always succeeds with a numeric string as the result, they fail to find any available ports. POSIX doesn't seem to mandate the behavior one way or another. it specifies an abstract service database, which an implementation could define to include numeric port strings, but it makes more sense to align behavior with traditional implementations. based on patch by A. Wilcox. the original patch only changed getservbyport[_r]. to maintain a consistent view of the "service database", I have also modified getservbyname[_r] to exclude numeric port strings.
* fix signal masking race in pthread_create with priority attributesRich Felker2017-09-061-2/+7
| | | | | | | | | | | if the parent thread was able to set the new thread's priority before it reached the check for 'startlock', the new thread failed to restore its signal mask and thus ran with all signals blocked. concept for patch by Sergei, who reported the issue; unnecessary changes were removed and comments added since the whole 'startlock' thing is non-idiomatic and confusing. eventually it should be replaced with use of idiomatic synchronization primitives.
* handle whitespace before %% in scanfBartosz Brachaczek2017-09-042-5/+13
| | | | | this is mandated by C and POSIX standards and is in accordance with glibc behavior.
* fix OOB reads in Xbyte_memmemAlexander Monakov2017-09-041-9/+9
| | | | Reported by Leah Neukirchen.
* free allocations in clearenvAlexander Monakov2017-09-041-2/+6
| | | | | | This aligns clearenv with the Linux man page by setting 'environ' rather than '*environ' to NULL, and stops it from leaking entries allocated by the libc.
* overhaul environment functionsAlexander Monakov2017-09-044-81/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rewrite environment access functions to slim down code, fix bugs and avoid invoking undefined behavior. * avoid using int-typed iterators where size_t would be correct; * use strncmp instead of memcmp consistently; * tighten prologues by invoking __strchrnul; * handle NULL environ. putenv: * handle "=value" input via unsetenv too (will return -1/EINVAL); * rewrite and simplify __putenv; fix the leak caused by failure to deallocate entry added by preceding setenv when called from putenv. setenv: * move management of libc-allocated entries to this translation unit, and use no-op weak symbols in putenv/unsetenv; unsetenv: * rewrite; this fixes UB caused by testing a free'd pointer against NULL on entry to subsequent loops. Not changed: Failure to extend allocation tracking array (previously __env_map, now env_alloced) is ignored rather than causing to report -1/ENOMEM to the caller; the worst-case consequence is leaking this allocation when it is removed or replaced in a subsequent environment access. Initially UB in unsetenv was reported by Alexander Cherepanov. Using a weak alias to avoid pulling in malloc via unsetenv was suggested by Rich Felker.
* fix erroneous acceptance of f4 9x xx xx code sequences by utf-8 decoderRich Felker2017-09-011-1/+1
| | | | | | | the DFA table controlling accepted ranges for the f4 prefix used an incorrect upper bound of 0xa0 where it should have been 0x90, allowing such sequences to be accepted and decoded as non-Unicode-scalar values 0x110000 through 0x11ffff.
* fix erroneous stop before input limit in mbsnrtowcs and wcsnrtombsRich Felker2017-08-312-2/+6
| | | | | | | | | | the value computed as an output limit that bounds the amount of input consumed below the input limit was incorrectly being used as the actual amount of input consumed. instead, compute the actual amount of input consumed as a difference of pointers before and after the conversion. patch by Mikhail Kremnyov.
* add a_clz_64 helper functionSzabolcs Nagy2017-08-291-0/+21
| | | | | | | | | counts leading zero bits of a 64bit int, undefined on zero input. (has nothing to do with atomics, added to atomic.h so target specific helper functions are together.) there is a logarithmic generic implementation and another in terms of a 32bit a_clz_32 on targets where that's available.
* fix undefined behavior in memset due to missing sequence pointsRich Felker2017-08-291-4/+8
| | | | patch by Pascal Cuoq.
* __init_libc: add fallbacks for __progname setupAlexander Monakov2017-08-291-4/+4
| | | | | | | | | | | | It is possible for argv[0] to be a null pointer, but the __progname variable is used to implement functions in src/legacy/err.c that do not expect it to be null. It is also available to the user via the program_invocation_name alias as a GNU extension, and the implementation in Glibc initializes it to a pointer to empty string rather than NULL. Since argv[0] is usually non-null and it's preferable to keep those variables in BSS, implement the fallbacks in __init_libc, which also allows to have an intermediate fallback to AT_EXECFN.
* fix unsynchronized access to FILE structure in fflush(0)Rich Felker2017-08-291-1/+4
| | | | | | commit c002668eb0352e619ea7064e4940b397b4a6e68d inadvertently moved the check for unflushed write buffer outside of the scope of the existing lock.
* fix signed overflow in ftokDaniel Sabogal2017-08-121-1/+1
|
* trap UB from attempts to join a detached threadRich Felker2017-08-111-0/+1
| | | | | | | | | | | | | | passing to pthread_join the id of a thread which is not joinable results in undefined behavior. in principle the check to trap does not necessarily work if pthread_detach was called after thread creation, since no effort is made here to synchronize access to t->detached, but the check is well-defined and harmless for callers which did not invoke UB, and likely to help catch erroneous code that would otherwise mysteriously hang. patch by William Pitcock.
* ppc64: fix setjmp/longjmp handling of TOC pointerBobby Bingham2017-08-113-17/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | The TOC pointer is constant within a single dso, but needs to be saved and restored around cross-dso calls. The PLT stub saves it to the caller's stack frame, and the linker adds code to the caller to restore it. With a local call, as within a single dso or with static linking, this doesn't happen and the TOC pointer is always in r2. Therefore, setjmp/longjmp need to save/restore the TOC pointer from/to different locations depending on whether the call to setjmp was a local or non-local call. It is always safe for longjmp to restore to both r2 and the caller's stack. If the call to setjmp was local, and only r2 matters and the stack location will be ignored, but is required by the ABI to be reserved for the TOC pointer. If the call was non-local, then only the stack location matters, and whatever is restored into r2 will be clobbered anyway when the caller reloads r2 from the stack. A little extra care is required for sigsetjmp, because it uses setjmp internally. After the second return from this setjmp call, r2 will contain the caller's TOC pointer instead of libc's TOC pointer. We need to save and restore the correct libc pointer before we can tail call to __sigsetjmp_tail.
* qsort: add a short comment about the algorithmLeah Neukirchen2017-08-111-0/+3
|
* add _NL_LOCALE_NAME extension to nl_langinfoRich Felker2017-07-311-0/+4
| | | | | | | | | | | | | | | | | since setlocale(cat, NULL) is required to return the setting for the global locale, there is no standard mechanism to obtain the name of the currently active thread-local locale set by uselocale. this makes it impossible for application/library software to load appropriate translations, etc. unless using the gettext implementation provided by libc, which has privileged access to libc internals. to fill this gap, glibc introduced the _NL_LOCALE_NAME macro which can be used with nl_langinfo to obtain the name. GNU gettext/gnulib code already use this functionality on glibc, and can easily be adapted to make use of it on non-glibc systems if it's available; for other systems they poke at locale implementation internals, which we want to avoid. this patch provides a compatible interface to the one glibc introduced.
* fix missing volatile qualifier on lock in __get_localeJens Gustedt2017-07-041-1/+1
|
* remove ineffective compiler assist from printfAlexander Monakov2017-07-042-4/+0
| | | | | | The switch statement has no 'default:' case and the function ends immediately following the switch, so the extra comparison did not communicate any extra information to the compiler.
* fix undefined behavior in ptraceAlexander Monakov2017-07-041-2/+6
|
* unify the use of FUTEX_PRIVATEJens Gustedt2017-07-044-4/+4
| | | | | | The flag 1<<7 is used in several places for different purposes that are not always easy to distinguish. Mark those usages that correspond to the flag that is used by the kernel for futexes.
* fix undefined behavior in freeAlexander Monakov2017-07-041-2/+3
|
* reapply va_arg hacks removal to wprintfAlexander Monakov2017-07-041-26/+1
| | | | | commit 58e2396a9aa23c132faf4198ca4d779c84955b38 missed that the same code was duplicated in implementation of vfwprintf.
* powerpc64: add single-instruction math functionsRich Felker2017-06-2322-0/+290
| | | | | | | | | | while the official elfv2 abi for "powerpc64le" sets power8 as the baseline isa, we use it for both little and big endian powerpc64 targets and need to maintain compatibility with pre-power8 models. the instructions for sqrt, fabs, and fma are in the baseline isa; support for the rest is conditional via predefined isa-level macros. patch by David Edelsohn.
* s390x: add single-instruction math functionsRich Felker2017-06-2324-0/+360
| | | | | | | | these were introduced in z196 and not available in the baseline (z900) ISA level. use __HTM__ as an alternate indicator for ISA level, since gcc did not define __ARCH__ until 7.x. patch by David Edelsohn.
* fix arm run-time abi string functionsSzabolcs Nagy2017-06-226-36/+76
| | | | | | | | | in arm rtabi these __aeabi_* functions have special abi (they are only allowed to clobber r0,r1,r2,r3,ip,lr,cpsr), so they cannot be simple wrappers around normal string functions (which may clobber other registers), the safest solution is to write them in asm, a minimalistic implementation works because these are not supposed to be emitted by compilers or used in general.
* fix regression in getspnam[_r] error code for insufficient buffer sizeRich Felker2017-06-211-1/+1
| | | | | commit 2d7d05f031e014068a61d3076c6178513395d2ae wrongly changed ERANGE to EINVAL, likely as the result of copy-and-paste error.
* fix iconv conversions for iso88592-iso885916Bartosz Brachaczek2017-06-201-1/+1
| | | | | | | commit 97bd6b09dbe7478d5a90a06ecd9e5b59389d8eb9 refactored the table lookup into a function and introduced an error in index computation. the error caused garbage to be read from the table if the given charmap had a non-zero number of elided entries.
* handle errors from localtime_r in ctime_rRich Felker2017-06-201-3/+2
| | | | | | | | POSIX requires ctime_r return a null pointer on failure, which can occur if the input time_t value is not representable in broken down form. based on patch by Alexander Monakov.
* set errno when getpw*_r, getgr*_r, and getspnam_r failRich Felker2017-06-153-3/+7
| | | | | | | | | these functions return an error code, and are not explicitly documented to set errno, but they are nonstandard and the historical implementations do set errno as well, and some applications expect this behavior. do likewise for compatibility. patch by Rudolph Pereira.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-09 06:36:16 +0000