about summary refs log tree commit diff
path: root/src
Commit message (Collapse)AuthorAgeFilesLines
* fix writes outside buffer by ungetc after setvbufRich Felker2018-07-131-1/+1
| | | | | | | | | commit 0b80a7b0404b6e49b0b724e3e3fe0ed5af3b08ef, which added non-stub setvbuf, applied the UNGET pushback adjustment to the size of the buffer passed in, but inadvertently omitted offsetting the start by the same amount, thereby allowing unget to clobber up to 8 bytes before the start of the buffer. this bug was introduced in the present release cycle; no releases are affected.
* resolver: don't depend on v4mapped ipv6 to probe routability of v4 addrsRich Felker2018-07-111-15/+32
| | | | | | | | | | | | | | | | | | to produce sorted results roughly corresponding to RFC 3484/6724, __lookup_name computes routability and choice of source address via dummy UDP connect operations (which do not produce any packets). since at the logical level, the properties fed into the sort key are computed on ipv6 addresses, the code was written to use the v4mapped ipv6 form of ipv4 addresses and share a common code path for them all. however, on kernels where ipv6 support has been completely omitted, this causes ipv4 to appear equally unroutable as ipv6, thereby putting unreachable ipv6 addresses before ipv4 addresses in the results. instead, use only ipv4 sockets to compute routability for ipv4 addresses. some gratuitous conversion back and forth is left so that the logic is not affected by these changes. it may be possible to simplify the ipv4 case considerably, thereby reducing code size and complexity.
* optimize explicit_bzero for sizeAlexander Monakov2018-07-021-1/+1
| | | | | Avoid saving/restoring the incoming argument by reusing memset return value.
* fix missing timeout argument to futex syscall in __futexwaitPatrick Oppenlander2018-06-261-2/+2
|
* add explicit_bzero implementationDavid Carlier2018-06-261-0/+8
| | | | | | | | | maintainer's note: past sentiment was that, despite being imperfect and unable to force clearing of all possible copies of sensitive data (e.g. in registers, register spills, signal contexts left on the stack, etc.) this function would be added if major implementations agreed on it, which has happened -- several BSDs and glibc all include it.
* inet_ntop: do not compress single zeros in IPv6Arthur Jones2018-06-261-1/+1
| | | | | | | | | maintainer's note: this change is for conformance with RFC 5952, 4.2.2, which explicitly forbids use of :: to shorten a single 16-bit 0 field when producing the canonical text representation for an IPv6 address. fixes a test failure reported by Philip Homburg, who also submitted a patch, but this fix is simpler and should produce smaller code.
* strftime: fix underlying format string in %z formatDaniel Sabogal2018-06-261-1/+1
| | | | the expression (tm->__tm_gmtoff)/3600 has type long. use %+.2ld instead.
* resolver: omit final dot (root/suppress-search) in canonical nameRich Felker2018-06-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | if a final dot was included in the queried host name to anchor it to the dns root/suppress search domains, and the result was not a CNAME, the returned canonical name included the final dot. this was not consistent with other implementations, confused some applications, and does not seem desirable. POSIX specifies returning a pointer to, or to a copy of, the input nodename, when the canonical name is not available, but does not attempt to specify what constitutes "not available". in the case of search, we already have an implementation-defined "availability" of a canonical name as the fully-qualified name resulting from search, so defining it similarly in the no-search case seems reasonable in addition to being consistent with other implementations. as a bonus, fix the case where more than one trailing dot is included, since otherwise the changes made here would wrongly cause lookups with two trailing dots to succeed. previously this case resulted in malformed dns queries and produced EAI_AGAIN after a timeout. now it fails immediately with EAI_NONAME.
* add memfd_create syscall wrapperSzabolcs Nagy2018-06-201-0/+8
| | | | memfd_create was added in linux v3.17 and glibc has api for it.
* add mlock2 linux syscall wrapperSzabolcs Nagy2018-06-201-0/+10
| | | | | | | | mlock2 syscall was added in linux v4.4 and glibc has api for it. It falls back to mlock in case of flags==0, so that case works even on older kernels. MLOCK_ONFAULT is moved under _GNU_SOURCE following glibc.
* work around broken kernel struct ipc_perm on some big endian archsRich Felker2018-06-203-6/+72
| | | | | | | | | | | | | | | the mode member of struct ipc_perm is specified by POSIX to have type mode_t, which is uniformly defined as unsigned int. however, Linux defines it with type __kernel_mode_t, and defines __kernel_mode_t as unsigned short on some archs. since there is a subsequent padding field, treating it as a 32-bit unsigned int works on little endian archs, but the order is backwards on big endian archs with the erroneous definition. since multiple archs are affected, remedy the situation with fixup code in the affected functions (shmctl, semctl, and msgctl) rather than repeating the same shims in syscall_arch.h for every affected arch.
* add m68k portRich Felker2018-06-199-0/+224
| | | | | | | | | | | | | three ABIs are supported: the default with 68881 80-bit fpu format and results returned in floating point registers, softfloat-only with the same format, and coldfire fpu with IEEE single/double only. only the first is tested at all, and only under qemu which has fpu emulation bugs. basic functionality smoke tests have been performed for the most common arch-specific breakage via libc-test and qemu user-level emulation. some sysvipc failures remain, but are shared with other big endian archs and will be fixed separately.
* add support for m68k 80-bit long double variantRich Felker2018-06-142-2/+21
| | | | | | | | | since x86 and m68k are the only archs with 80-bit long double and each has mandatory endianness, select the variant via endianness. differences are minor: apparently just byte order and representation of infinities. the m68k format is not well-documented anywhere I could find, so if other differences are found they may require additional changes later.
* fix TLS layout of TLS variant I when there is a gap above TPSzabolcs Nagy2018-06-022-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | In TLS variant I the TLS is above TP (or above a fixed offset from TP) but on some targets there is a reserved gap above TP before TLS starts. This matters for the local-exec tls access model when the offsets of TLS variables from the TP are hard coded by the linker into the executable, so the libc must compute these offsets the same way as the linker. The tls offset of the main module has to be alignup(GAP_ABOVE_TP, main_tls_align). If there is no TLS in the main module then the gap can be ignored since musl does not use it and the tls access models of shared libraries are not affected. The previous setup only worked if (tls_align & -GAP_ABOVE_TP) == 0 (i.e. TLS did not require large alignment) because the gap was treated as a fixed offset from TP. Now the TP points at the end of the pthread struct (which is aligned) and there is a gap above it (which may also need alignment). The fix required changing TP_ADJ and __pthread_self on affected targets (aarch64, arm and sh) and in the tlsdesc asm the offset to access the dtv changed too.
* fix output size handling for multi-unicode-char big5-hkscs charactersRich Felker2018-06-011-5/+13
| | | | | | | | | | | | | | | | | | | | since this iconv implementation's output is stateless, it's necessary to know before writing anything to the output buffer whether the conversion of the current input character will fit. previously we used a hard-coded table of the output size needed for each supported output encoding, but failed to update the table when adding support for conversion to jis-based encodings and again when adding separate encoding identifiers for implicit-endianness utf-16/32 and ucs-2/4 variants, resulting in out-of-bound table reads and incorrect size checks. no buffer overflow was possible, but the affected characters could be converted incorrectly, and iconv could potentially produce an incorrect return value as a result. remove the hard-coded table, and instead perform the recursive iconv conversion to a temporary buffer, measuring the output size and transferring it to the actual output buffer only if the whole converted result fits.
* fix iconv mapping of big5-hkscs characters that map to two unicode charsRich Felker2018-06-011-1/+1
| | | | | | | | | | | | | this case is handled with a recursive call to iconv using a specially-constructed conversion descriptor. the constant 0 was used as the offset for utf-8, since utf-8 appears first in the charmaps table, but the offset used needs to point into the charmap entry, past the name/aliases at the beginning, to the byte identifying the encoding. as a result of this error, junk was produced. instead, call find_charmap so we don't have to hard-code a nontrivial offset. with this change, the code has been tested and found to work in the case of converting the affected hkscs characters to utf-8.
* fix iconv conversion to UTF-32 with implicit (big) endiannessWill Dietz2018-05-091-0/+2
| | | | | | | | | | | maintainer's notes: commit 95c6044e2ae85846330814c4ac5ebf4102dbe02c split UTF-32 and UTF-32BE but neglected to add a case for the former as a destination encoding, resulting in it wrongly being handled by the default case. the intent was that the value of the macro be chosen to encode "big endian" in the low bits, so that no code would be needed, but this was botched; instead, handle it the way UCS2 is handled.
* fix iconv buffer overflow converting to legacy JIS-based encodingsWill Dietz2018-05-091-0/+1
| | | | | | | | | | maintainer's notes: commit a223dbd27ae36fe53f9f67f86caf685b729593fc added the reverse conversions to JIS-based encodings, but omitted the check for remining buffer space in the case where the next character to be written was single-byte, allowing conversion to continue past the end of the destination buffer.
* make linking of thread-start with explicit scheduling conditionalRich Felker2018-05-093-28/+36
| | | | | | | the wrapper start function that performs scheduling operations is unreachable if pthread_attr_setinheritsched is never called, so move it there rather than the pthread_create source file, saving some code size for static-linked programs.
* improve design of thread-start with explicit scheduling attributesRich Felker2018-05-092-23/+39
| | | | | | | | | | | | eliminate the awkward startlock mechanism and corresponding fields of the pthread structure that were only used at startup. instead of having pthread_create perform the scheduling operations and having the new thread wait for them to be completed, start the new thread with a wrapper start function that performs its own scheduling, sending the result code back via a futex. this way the new thread can use storage from the calling thread's stack rather than permanent fields in the pthread structure.
* clean up and reduce size of internal pthread structureRich Felker2018-05-071-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | over time the pthread structure has accumulated a lot of cruft taking up size. this commit removes unused fields and packs booleans and other small data more efficiently. changes which would also require changing code are not included at this time. non-volatile booleans are packed as unsigned char bitfield members. the canceldisable and cancelasync fields need volatile qualification due to how they're accessed from the cancellation signal handler and cancellable syscalls called from signal handlers. since volatile bitfield semantics are not clearly defined, discrete char objects are used instead. the pid field is completely removed; it has been unused since commit 83dc6eb087633abcf5608ad651d3b525ca2ec35e. the tid field's type is changed to int because its use is as a value in futexes, which are defined as plain int. it has no conceptual relationship to pid_t. also, its position is not ABI. startlock is reduced to a length-1 array. the second element was presumably intended as a waiter count, but it was never used and made no sense, since there is at most one waiter.
* improve joinable/detached thread state handlingRich Felker2018-05-056-24/+33
| | | | | | | | | | | | | | | | | previously, some accesses to the detached state (from pthread_join and pthread_getattr_np) were unsynchronized; they were harmless in programs with well-defined behavior, but ugly. other accesses (in pthread_exit and pthread_detach) were synchronized by a poorly named "exitlock", with an ad-hoc trylock operation on it open-coded in pthread_detach, whose only purpose was establishing protocol for which thread is responsible for deallocation of detached-thread resources. instead, use an atomic detach_state and unify it with the futex used to wait for thread exit. this eliminates 2 members from the pthread structure, gets rid of the hackish lock usage, and makes rigorous the trap added in commit 80bf5952551c002cf12d96deb145629765272db0 for catching attempts to join detached threads. it should also make attempt to detach an already-detached thread reliably trap.
* improve pthread_exit synchronization with functions targeting tidRich Felker2018-05-056-17/+18
| | | | | | | | | | | | | | | | if the last thread exited via pthread_exit, the logic that marked it dead did not account for the possibility of it targeting itself via atexit handlers. for example, an atexit handler calling pthread_kill(pthread_self(), SIGKILL) would return success (previously, ESRCH) rather than causing termination via the signal. move the release of killlock after the determination is made whether the exiting thread is the last thread. in the case where it's not, move the release all the way to the end of the function. this way we can clear the tid rather than spending storage on a dedicated dead-flag. clearing the tid is also preferable in that it hardens against inadvertent use of the value after the thread has terminated but before it is joined.
* remove incorrect ESRCH error from pthread_killRich Felker2018-05-041-1/+2
| | | | | | | | | | posix documents in the rationale and future directions for pthread_kill that, since the lifetime of the thread id for a joinable thread lasts until it is joined, ESRCH is not a correct error for pthread_kill to produce when the target thread has exited but not yet been joined, and that conforming applications cannot attempt to detect this state. future versions of the standard may explicitly require that ESRCH not be returned for this case.
* use a dedicated futex object for pthread_join instead of tid fieldRich Felker2018-05-024-5/+8
| | | | | | | | | | | | | | | | | | the tid field in the pthread structure is not volatile, and really shouldn't be, so as not to limit the compiler's ability to reorder, merge, or split loads in code paths that may be relevant to performance (like controlling lock ownership). however, use of objects which are not volatile or atomic with futex wait is inherently broken, since the compiler is free to transform a single load into multiple loads, thereby using a different value for the controlling expression of the loop and the value passed to the futex syscall, leading the syscall to block instead of returning. reportedly glibc's pthread_join was actually affected by an equivalent issue in glibc on s390. add a separate, dedicated join_futex object for pthread_join to use.
* optimize sigisemptysetRich Felker2018-05-011-2/+3
| | | | | | | | the static const zero set ended up getting put in bss instead of rodata, wasting writable memory, and the call to memcmp was size-inefficient. generally for nonstandard extension functions we try to avoid poking at any internals directly, but the way the zero set was setup was arguably already doing so.
* avoid excessive stack usage in getcwdRich Felker2018-05-011-2/+2
| | | | | | | | | | | to support the GNU extension of allocating a buffer for getcwd's result when a null pointer is passed without incurring a link dependency on free, we use a PATH_MAX-sized buffer on the stack and only duplicate it to allocated storage after the operation succeeds. unfortunately this imposed excessive stack usage on all callers, including those not making use of the GNU extension. instead, use a VLA to make stack allocation conditional.
* getopt_long_only: don't prefix-match long-options that match short onesRich Felker2018-04-271-2/+15
| | | | | | | | | | | | | | | | | for getopt_long, partial (prefix) matches of long options always begin with "--" and thus can never be ambiguous with a short option. for getopt_long_only, though, a single-character option can match both a short option and as a prefix for a long option. in this case, we wrongly interpreted it as a prefix for the long option. introduce a new pass, only in long-only mode, to check the prefix match against short options before accepting it. the only reason there's a slightly nontrivial loop being introduced rather than strchr is that our getopt already supports multibyte short options, and getopt_long_long should handle them consistently. a temp buffer and strstr could have been used, but the code to set it up would be just as large as what's introduced here and it would unnecessarily pull in relatively large code for strstr.
* reintroduce hardening against partially-replaced allocatorRich Felker2018-04-193-5/+13
| | | | | | | | | | | | | | commit 618b18c78e33acfe54a4434e91aa57b8e171df89 removed the previous detection and hardening since it was incorrect. commit 72141795d4edd17f88da192447395a48444afa10 already handled all that remained for hardening the static-linked case. in the dynamic-linked case, have the dynamic linker check whether malloc was replaced and make that information available. with these changes, the properties documented in commit c9f415d7ea2dace5bf77f6518b6afc36bb7a5732 are restored: if calloc is not provided, it will behave as malloc+memset, and any of the memalign-family functions not provided will fail with ENOMEM.
* return chunks split off by memalign using __bin_chunk instead of freeRich Felker2018-04-193-7/+8
| | | | | | | | | | | | | | | this change serves multiple purposes: 1. it ensures that static linking of memalign-family functions will pull in the system malloc implementation, thereby causing link errors if an attempt is made to link the system memalign functions with a replacement malloc (incomplete allocator replacement). 2. it eliminates calls to free that are unpaired with allocations, which are confusing when setting breakpoints or tracing execution. as a bonus, making __bin_chunk external may discourage aggressive and unnecessary inlining of it.
* using malloc implementation types/macros/idioms for memalignRich Felker2018-04-191-20/+22
| | | | | | | | | the generated code should be mostly unchanged, except for explicit use of C_INUSE in place of copying the low bits from existing chunk headers/footers. these changes also remove mild UB due to dubious arithmetic on pointers into imaginary size_t[] arrays.
* move malloc implementation types and macros to an internal headerRich Felker2018-04-192-37/+40
|
* revert detection of partially-replaced allocatorRich Felker2018-04-193-15/+6
| | | | | | | | | | | | | | | | | | | | | commit c9f415d7ea2dace5bf77f6518b6afc36bb7a5732 included checks to make calloc fallback to memset if used with a replaced malloc that didn't also replace calloc, and the memalign family fail if free has been replaced. however, the checks gave false positives for replacement whenever malloc or free resolved to a PLT entry in the main program. for now, disable the checks so as not to leave libc in a broken state. this means that the properties documented in the above commit are no longer satisfied; failure to replace calloc and the memalign family along with malloc is unsafe if they are ever called. the calloc checks were correct but useless for static linking. in both cases (simple or full malloc), calloc and malloc are in a source file together, so replacement of one but not the other would give linking errors. the memalign-family check was useful for static linking, but broken for dynamic as described above, and can be replaced with a better link-time check.
* setvbuf: minor comment typo fixWill Dietz2018-04-191-1/+1
|
* remove a_ctz_l from arch specific atomic_arch.hAndre McCurdy2018-04-191-19/+23
| | | | | | | | Update atomic.h to provide a_ctz_l in all cases (atomic_arch.h should now only provide a_ctz_32 and/or a_ctz_64). The generic version of a_ctz_32 now takes advantage of a_clz_32 if available and the generic a_ctz_64 now makes use of a_ctz_32.
* fix out of bounds write for zero length buffer in gethostnameMarc André Tanner2018-04-191-1/+1
|
* add support for caller-provided buffers to setvbufRich Felker2018-04-181-11/+14
|
* clean up allocation/setup logic for open_[w]memstreamRich Felker2018-04-182-38/+50
| | | | | bring these functions up to date with the current idioms we use/prefer in fmemopen and fopencookie.
* clean up allocation/setup logic for fmemopenRich Felker2018-04-181-21/+31
| | | | | | rather than manually performing pointer arithmetic to carve multiple objects out of one allocation, use a containing struct that encompasses them all.
* minor cleanup in fopencookieRich Felker2018-04-181-5/+2
| | | | | assign entire struct rather than member-at-a-time. don't repeat buffer sizes; always use sizeof to ensure consistency.
* allow interposition/replacement of allocator (malloc)Rich Felker2018-04-184-23/+30
| | | | | | | | | | | | | | | | | | | | | | | replacement is subject to conditions on the replacement functions. they may only call functions which are async-signal-safe, as specified either by POSIX or as an implementation-defined extension. if any allocator functions are replaced, at least malloc, realloc, and free must be provided. if calloc is not provided, it will behave as malloc+memset. any of the memalign-family functions not provided will fail with ENOMEM. in order to implement the above properties, calloc and __memalign check that they are using their own malloc or free, respectively. choice to check malloc or free is based on considerations of supporting __simple_malloc. in order to make this work, calloc is split into separate versions for __simple_malloc and full malloc; commit ba819787ee93ceae94efd274f7849e317c1bff58 already did most of the split anyway, and completing it saves an extra call frame. previously, use of -Bsymbolic-functions made dynamic interposition impossible. now, we are using an explicit dynamic-list, so add allocator functions to the list. most are not referenced anyway, but all are added for completeness.
* refactor flockfile not to duplicate lock mechanism logicRich Felker2018-04-182-12/+14
|
* fix stdio lock dependency on read-after-free not faultingRich Felker2018-04-183-20/+24
| | | | | | | instead of using a waiters count, add a bit to the lock field indicating that the lock may have waiters. threads which obtain the lock after contending for it will perform a potentially-spurious wake when they release the lock.
* remove unused __brk function/source fileRich Felker2018-04-171-7/+0
| | | | | commit e3bc22f1eff87b8f029a6ab31f1a269d69e4b053 removed all references to __brk.
* comment __malloc_donate overflow logicRich Felker2018-04-171-0/+3
|
* ldso, malloc: implement reclaim_gaps via __malloc_donateAlexander Monakov2018-04-171-18/+43
| | | | | Split 'free' into unmap_chunk and bin_chunk, use the latter to introduce __malloc_donate and use it in reclaim_gaps instead of calling 'free'.
* malloc: fix an over-allocation bugAlexander Monakov2018-04-171-4/+4
| | | | | Fix an instance where realloc code would overallocate by OVERHEAD bytes amount. Manually arrange for reuse of memcpy-free-return exit sequence.
* fix return value of nice functionRich Felker2018-04-171-5/+9
| | | | | | | the Linux SYS_nice syscall is unusable because it does not return the newly set priority. always use SYS_setpriority. also avoid overflows in addition of inc by handling large inc values directly without examining the old nice value.
* optimize malloc0Alexander Monakov2018-04-111-6/+23
| | | | | | | | | | | | | Implementation of __malloc0 in malloc.c takes care to preserve zero pages by overwriting only non-zero data. However, malloc must have already modified auxiliary heap data just before and beyond the allocated region, so we know that edge pages need not be preserved. For allocations smaller than one page, pass them immediately to memset. Otherwise, use memset to handle partial pages at the head and tail of the allocation, and scan complete pages in the interior. Optimize the scanning loop by processing 16 bytes per iteration and handling rest of page via memset as soon as a non-zero byte is found.
* fix incorrect results for catan with some inputsRich Felker2018-04-111-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the catan implementation from OpenBSD includes a FIXME-annotated "overflow" branch that produces a meaningless and incorrect large-magnitude result. it was reachable via three paths, corresponding to gotos removed by this commit, in order: 1. pure imaginary argument with imaginary component greater than 1 in magnitude. this case does not seem at all exceptional and is handled (at least with the quality currently expected from our complex math functions) by the existing non-exceptional code path. 2. arguments on the unit circle, including the pure-real argument 1.0. these are not exceptional except for ±i, which should produce results with infinite imaginary component and which lead to computation of atan2(±0,0) in the existing non-exceptional code path. such calls to atan2() however are well-defined by POSIX. 3. the specific argument +i. this route should be unreachable due to the above (2), but subtle rounding effects might have made it possible in rare cases. continuing on the non-exceptional code path in this case would lead to computing the (real) log of an infinite argument, then producing a NAN when multiplying it by I. for now, remove the exceptional code paths entirely. replace the multiplication by I with construction of a complex number using the CMPLX macro so that the NAN issue (3) prevented cannot arise. with these changes, catan should give reasonably correct results for real arguments, and should no longer give completely-wrong results for pure-imaginary arguments outside the interval (-i,+i).
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-07 02:52:03 +0000