| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
| |
the zero initialization is redundant since decode_vec does its own
clearing, and it increases the risk that buggy compilers will generate
calls to memset. as long as symbols are bound at ld time, such a call
will not break anything, but it may be desirable to turn off ld-time
binding in the future.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this was already essentially possible as a result of the previous
commits changing the dynamic linker/thread pointer bootstrap process.
this commit mainly adds build system infrastructure:
configure no longer attempts to disable stack protector. instead it
simply determines how so the makefile can disable stack protector for
a few translation units used during early startup.
stack protector is also disabled for memcpy and memset since compilers
(incorrectly) generate calls to them on some archs to implement
struct initialization and assignment, and such calls may creep into
early initialization.
no explicit attempt to enable stack protector is made by configure at
this time; any stack protector option supported by the compiler can be
passed to configure in CFLAGS, and if the compiler uses stack
protector by default, this default is respected.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
since 1.1.0, musl has nominally required a thread pointer to be setup.
most of the remaining code that was checking for its availability was
doing so for the sake of being usable by the dynamic linker. as of
commit 71f099cb7db821c51d8f39dfac622c61e54d794c, this is no longer
necessary; the thread pointer is now valid before any libc code
(outside of dynamic linker bootstrap functions) runs.
this commit essentially concludes "phase 3" of the "transition path
for removing lazy init of thread pointer" project that began during
the 1.1.0 release cycle.
|
|
|
|
|
|
|
|
|
|
|
|
| |
this allows the dynamic linker itself to run with a valid thread
pointer, which is a prerequisite for stack protector on archs where
the ssp canary is stored in TLS. it will also allow us to remove some
remaining runtime checks for whether the thread pointer is valid.
as long as the application and its libraries do not require additional
size or alignment, this early thread pointer will be kept and reused
at runtime. otherwise, a new static TLS block is allocated after
library loading has finished and the thread pointer is switched over.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
previously, the layout of the static TLS block was perturbed by the
size of the dtv; dtv size increasing from 0 to 1 perturbed both TLS
arch types, and the TLS-above-TP type's layout was perturbed by the
specific number of dtv slots (libraries with TLS). this behavior made
it virtually impossible to setup a tentative thread pointer address
before loading libraries and keep it unchanged as long as the
libraries' TLS size/alignment requirements fit.
the new code fixes the location of the dtv and pthread structure at
opposite ends of the static TLS block so that they will not move
unless size or alignment changes.
|
|
|
|
|
|
|
|
| |
previously a new GDT slot was requested, even if one had already been
obtained by a previous call. instead extract the old slot number from
GS and reuse it if it was already set. the formula (GS-3)/8 for the
slot number automatically yields -1 (request for new slot) if GS is
zero (unset).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this overhaul further reduces the amount of arch-specific code needed
by the dynamic linker and removes a number of assumptions, including:
- that symbolic function references inside libc are bound at link time
via the linker option -Bsymbolic-functions.
- that libc functions used by the dynamic linker do not require
access to data symbols.
- that static/internal function calls and data accesses can be made
without performing any relocations, or that arch-specific startup
code handled any such relocations needed.
removing these assumptions paves the way for allowing libc.so itself
to be built with stack protector (among other things), and is achieved
by a three-stage bootstrap process:
1. relative relocations are processed with a flat function.
2. symbolic relocations are processed with no external calls/data.
3. main program and dependency libs are processed with a
fully-functional libc/ldso.
reduction in arch-specific code is achived through the following:
- crt_arch.h, used for generating crt1.o, now provides the entry point
for the dynamic linker too.
- asm is no longer responsible for skipping the beginning of argv[]
when ldso is invoked as a command.
- the functionality previously provided by __reloc_self for heavily
GOT-dependent RISC archs is now the arch-agnostic stage-1.
- arch-specific relocation type codes are mapped directly as macros
rather than via an inline translation function/switch statement.
|
|
|
|
|
| |
commit f08ab9e61a147630497198fe3239149275c0a3f4 introduced these
accidentally as remnants of some work I tried that did not work out.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this global lock allows certain unlock-type primitives to exclude
mmap/munmap operations which could change the identity of virtual
addresses while references to them still exist.
the original design mistakenly assumed mmap/munmap would conversely
need to exclude the same operations which exclude mmap/munmap, so the
vmlock was implemented as a sort of 'symmetric recursive rwlock'. this
turned out to be unnecessary.
commit 25d12fc0fc51f1fae0f85b4649a6463eb805aa8f already shortened the
interval during which mmap/munmap held their side of the lock, but
left the inappropriate lock design and some inefficiency.
the new design uses a separate function, __vm_wait, which does not
hold any lock itself and only waits for lock users which were already
present when it was called to release the lock. this is sufficient
because of the way operations that need to be excluded are sequenced:
the "unlock-type" operations using the vmlock need only block
mmap/munmap operations that are precipitated by (and thus sequenced
after) the atomic-unlock they perform while holding the vmlock.
this allows for a spectacular lack of synchronization in the __vm_wait
function itself.
|
|
|
|
|
|
|
|
|
|
| |
as a result of commit 12e1e324683a1d381b7f15dd36c99b37dd44d940, kernel
processing of the robust list is only needed for process-shared
mutexes. previously the first attempt to lock any owner-tracked mutex
resulted in robust list initialization and a set_robust_list syscall.
this is no longer necessary, and since the kernel's record of the
robust list must now be cleared at thread exit time for detached
threads, optimizing it out is more worthwhile than before too.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the robust list head lies in the thread structure, which is unmapped
before exit for detached threads. this leaves the kernel unable to
process the exiting thread's robust list, and with a dangling pointer
which may happen to point to new unrelated data at the time the kernel
processes it.
userspace processing of the robust list was already needed for
non-pshared robust mutexes in order to perform private futex wakes
rather than the shared ones the kernel would do, but it was
conditional on linking pthread_mutexattr_setrobust and did not bother
processing the pshared mutexes in the list, which requires additional
logic for the robust list pending slot in case pthread_exit is
interrupted by asynchronous process termination.
the new robust list processing code is linked unconditionally (inlined
in pthread_exit), handles both private and shared mutexes, and also
removes the kernel's reference to the robust list before unmapping and
exit if the exiting thread is detached.
|
| |
|
|
|
|
|
|
|
|
| |
when dlopen fails, all partially-loaded libraries need to be unmapped
and freed. any of these libraries using an rpath with $ORIGIN
expansion may have an allocated string for the expanded rpath;
previously, this string was not freed when freeing the library data
structures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this change hardens the dynamic linker against the possibility of
loading the wrong library due to inability to expand $ORIGIN in rpath.
hard failures such as excessively long paths or absence of /proc (when
resolving /proc/self/exe for the main executable's origin) do not stop
the path search, but memory allocation failures and any other
potentially transient failures do.
to implement this change, the meaning of the return value of
fixup_rpath function is changed. returning zero no longer indicates
that the dso's rpath string pointer is non-null; instead, the caller
needs to check. a return value of -1 indicates a failure that should
stop further path search.
|
|
|
|
|
|
|
|
|
|
|
|
| |
transient errors during the path search should not allow the search to
continue and possibly open the wrong file. this patch eliminates most
conditions where that could happen, but there is still a possibility
that $ORIGIN-based rpath processing will have an allocation failure,
causing the search to skip such a path. fixing this is left as a
separate task.
a small bug where overly-long path components caused an infinite loop
rather than being skipped/ignored is also fixed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Internally regcomp needs to copy some iteration nodes before
translating the AST into TNFA representation.
Literal nodes were not copied correctly: the class type and list
of negated class types were not copied so classes were ignored
(in the non-negated case an ignored char class caused the literal
to match everything).
This affects iterations when the upper bound is finite, larger
than one or the lower bound is larger than one. So eg. the EREs
[[:digit:]]{2}
[^[:space:]ab]{1,4}
were treated as
.{2}
[^ab]{1,4}
The fix is done with minimal source modification to copy the
necessary fields, but the AST preparation and node handling
code of tre will need to be cleaned up for clarity.
|
|
|
|
|
|
|
|
| |
The valid BRE backref tokens are \1 .. \9, and 0 is not a special
character either so \0 is undefined by the standard.
Such undefined escaped characters are treated as literal characters
currently, following existing practice, so \0 is the same as 0.
|
|
|
|
|
|
|
|
| |
one stop condition for parsing abbreviated ipv6 addressed was missed,
allowing the internal ip[] buffer to overflow. this patch adds the
missing stop condition and masks the array index so that, in case
there are any remaining stop conditions missing, overflowing the
buffer is not possible.
|
|
|
|
|
|
|
| |
one of the features of ERE is that it's actually a regular language
and does not admit expressions which cannot be matched in linear time.
introduction of \n backref support into regcomp's ERE parsing was
unintentional.
|
|
|
|
|
|
|
|
|
|
| |
the regex parser handles the (undefined) case of an unexpected byte
following a backslash as a literal. however, instead of correctly
decoding a character, it was treating the byte value itself as a
character. this was not only semantically unjustified, but turned out
to be dangerous on archs where plain char is signed: bytes in the
range 252-255 alias the internal codes -4 through -1 used for special
types of literal nodes in the AST.
|
|
|
|
|
|
|
|
|
|
|
| |
previously the implementation-internal signal used for multithreaded
set*id operations was left unblocked during handling of the
cancellation signal. however, on some archs, signal contexts are huge
(up to 5k) and the possibility of nested signal handlers drastically
increases the minimum stack requirement. since the cancellation signal
handler will do its job and return in bounded time before possibly
passing execution to application code, there is no need to allow other
signals to interrupt it.
|
|
|
|
|
| |
overly long user/group names are potentially a DoS vector and source
of other problems like partial writes by sendmsg, and not useful.
|
|
|
|
|
|
|
|
|
|
|
|
| |
previously, a sentinel value of (FILE *)-1 was used to inform the
caller of __nscd_query that nscd is not in use. aside from being an
ugly hack, this resulted in duplicate code paths for two logically
equivalent cases: no nscd, and "not found" result from nscd.
now, __nscd_query simply skips closing the socket and returns a valid
FILE pointer when nscd is not in use, and produces a fake "not found"
response header. the caller is then responsible for closing the socket
just like it would do if it had gotten a real "not found" response.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This completes the alternate backend support that was previously added
to the getpw* and getgr* functions. Unlike those, though, it
unconditionally queries nscd. Any groups from nscd that aren't in the
/etc/groups file are added to the returned list, and any that are
present in the file are ignored. The purpose of this behavior is to
provide a view of the group database consistent with what is observed
by the getgr* functions. If group memberships reported by nscd were
honored when the corresponding group already has a definition in the
/etc/groups file, the user's getgrouplist-based membership in the
group would conflict with their non-membership in the reported
gr_mem[] for the group.
The changes made also make getgrouplist thread-safe and eliminate its
clobbering of the global getgrent state.
|
|
|
|
|
|
|
|
|
|
| |
This adds complete aarch64 target support including bigendian subarch.
Some of the long double math functions are known to be broken otherwise
interfaces should be fully functional, but at this point consider this
port experimental.
Initial work on this port was done by Sireesh Tripurari and Kevin Bortis.
|
|
|
|
|
|
|
|
| |
This is in preparation for the aarch64 port only to have the long
double math symbols available on ld128 platforms. The implementations
should be fixed up later once we have proper tests for these functions.
Added bigendian handling for ld128 bit manipulations too.
|
|
|
|
|
| |
Changed the special case handling and bit manipulation to better
match the double version.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There are two main abi variants for thread local storage layout:
(1) TLS is above the thread pointer at a fixed offset and the pthread
struct is below that. So the end of the struct is at known offset.
(2) the thread pointer points to the pthread struct and TLS starts
below it. So the start of the struct is at known (zero) offset.
Assembly code for the dynamic TLSDESC callback needs to access the
dynamic thread vector (dtv) pointer which is currently at the front
of the pthread struct. So in case of (1) the asm code needs to hard
code the offset from the end of the struct which can easily break if
the struct changes.
This commit adds a copy of the dtv at the end of the struct. New members
must not be added after dtv_copy, only before it. The size of the struct
is increased a bit, but there is opportunity for size optimizations.
|
|
|
|
|
|
| |
due to a logic error in the use of masked cancellation mode,
pthread_cond_wait did not honor PTHREAD_CANCEL_DISABLE but instead
failed with ECANCELED when cancellation was pending.
|
|
|
|
|
| |
Implemented as a wrapper around fegetround introducing a new function
to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
a conservative estimate of 4*sizeof(size_t) was used as the minimum
alignment for thread-local storage, despite the only requirements
being alignment suitable for struct pthread and void* (which struct
pthread already contains). additional alignment required by the
application or libraries is encoded in their headers and is already
applied.
over-alignment prevented the builtin_tls array from ever being used in
dynamic-linked programs on 64-bit archs, thereby requiring allocation
at startup even in programs with no TLS of their own.
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this re-check idiom seems to have been copied from the alloc_fwd and
alloc_rev functions, which guess a bin based on non-synchronized
memory access to adjacent chunk headers then need to confirm, after
locking the bin, that the chunk is actually in the bin they locked.
the check being removed, however, was being performed on a chunk
obtained from the already-locked bin. there is no race to account for
here; the check could only fail in the event of corrupt free lists,
and even then it would not catch them but simply continue running.
since the bin_index function is mildly expensive, it seems preferable
to remove the check rather than trying to convert it into a useful
consistency check. casual testing shows a 1-5% reduction in run time.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the malloc init code provided its own version of pthread_once type
logic, including the exact same bug that was fixed in pthread_once in
commit 0d0c2f40344640a2a6942dda156509593f51db5d.
since this code is called adjacent to expand_heap, which takes a lock,
there is no reason to have pthread_once-type initialization. simply
moving the init code into the interval where expand_heap already holds
its lock on the brk achieves the same result with much less
synchronization logic, and allows the buggy code to be eliminated
rather than just fixed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the memory model we use internally for atomics permits plain loads of
values which may be subject to concurrent modification without
requiring that a special load function be used. since a compiler is
free to make transformations that alter the number of loads or the way
in which loads are performed, the compiler is theoretically free to
break this usage. the most obvious concern is with atomic cas
constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be
transformed to a_cas(p,*p,f(*p)); where the latter is intended to show
multiple loads of *p whose resulting values might fail to be equal;
this would break the atomicity of the whole operation. but even more
fundamental breakage is possible.
with the changes being made now, objects that may be modified by
atomics are modeled as volatile, and the atomic operations performed
on them by other threads are modeled as asynchronous stores by
hardware which happens to be acting on the request of another thread.
such modeling of course does not itself address memory synchronization
between cores/cpus, but that aspect was already handled. this all
seems less than ideal, but it's the best we can do without mandating a
C11 compiler and using the C11 model for atomics.
in the case of pthread_once_t, the ABI type of the underlying object
is not volatile-qualified. so we are assuming that accessing the
object through a volatile-qualified lvalue via casts yields volatile
access semantics. the language of the C standard is somewhat unclear
on this matter, but this is an assumption the linux kernel also makes,
and seems to be the correct interpretation of the standard.
|
|
|
|
|
|
| |
like close, pthread_join is a resource-deallocation function which is
also a cancellation point. the intent of masked cancellation mode is
to exempt such functions from failure with ECANCELED.
|
|
|
|
|
|
| |
pthread_testcancel is not in the ISO C reserved namespace and thus
cannot be used here. use the namespace-protected version of the
function instead.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
previously, the __timedwait function was optionally a cancellation
point depending on whether it was passed a pointer to a cleaup
function and context to register. as of now, only one caller actually
used such a cleanup function (and it may face removal soon); most
callers either passed a null pointer to disable cancellation or a
dummy cleanup function.
now, __timedwait is never a cancellation point, and __timedwait_cp is
the cancellable version. this makes the intent of the calling code
more obvious and avoids ugly dummy functions and long argument lists.
|
|
|
|
|
|
|
|
|
|
| |
as part of abstracting the futex wait, this function suppresses all
futex error values which callers should not see using a whitelist
approach. when the masked cancellation mode was added, the new
ECANCELED error was not whitelisted. this omission caused the new
pthread_cond_wait code using masked cancellation to exhibit a spurious
wake (rather than acting on cancellation) when the request arrived
after blocking on the cond var.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
on most cpu models, "rep stosq" has high overhead that makes it
undesirable for small memset sizes. the new code extends the
minimal-branch fast path for short memsets from size 15 up to size
126, and shrink-wraps this code path. in addition, "rep stosq" is
sensitive to misalignment. the cost varies with size and with cpu
model, but it has been observed performing 1.5 times slower when the
destination address is not aligned mod 16. the new code thus ensures
alignment mod 16, but also preserves any existing additional
alignment, in case there are cpu models where it is beneficial.
this version is based in part on changes proposed by Denys Vlasenko.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
on most cpu models, "rep stosl" has high overhead that makes it
undesirable for small memset sizes. the new code extends the
minimal-branch fast path for short memsets from size 15 up to size 62,
and shrink-wraps this code path. in addition, "rep stosl" is very
sensitive to misalignment. the cost varies with size and with cpu
model, but it has been observed performing 1.5 to 4 times slower when
the destination address is not aligned mod 16. the new code thus
ensures alignment mod 16, but also preserves any existing additional
alignment, in case there are cpu models where it is beneficial.
this version is based in part on changes to the x86_64 memset asm
proposed by Denys Vlasenko.
|
|
|
|
| |
Based on a patch by Szabolcs Nagy.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the equivalent checks for newly opened stdio output streams, used to
determine buffering mode, are also fixed.
on most archs, the TCGETS ioctl command shares a value with
SNDCTL_TMR_TIMEBASE, part of the OSS sound API which was apparently
used with certain MIDI and timer devices. for file descriptors
referring to such a device, TCGETS will not fail with ENOTTY as
expected; it may produce a different error, or may succeed, and if it
succeeds it changes the mode of the device. while it's unlikely that
such devices are in use, this is in principle very harmful behavior
for an operation which is supposed to do nothing but query whether the
fd refers to a tty.
TIOCGWINSZ, used to query logical window size for a terminal, was
chosen as an alternate ioctl to perform the isatty check. it does not
share a value with any other ioctl commands, and it succeeds on any
tty device.
this change also cleans up strace output to be less ugly and
misleading.
|
|
|
|
|
|
|
|
|
|
|
|
| |
due to accidental use of = instead of ==, the error code was always
set to zero in the signaled wake case for non-shared cv waits.
suppressing ETIMEDOUT (the only possible wait error) is harmless and
actually permitted in this case, but suppressing mutex errors could
give the caller false information about the state of the mutex.
commit 8741ffe625363a553e8f509dc3ca7b071bdbab47 introduced this
regression and commit d9da1fb8c592469431c764732d09f7756340190e
preserved it when reorganizing the code.
|
|
|
|
|
|
|
|
| |
when we fail to find the entry in the commonly accepted files, we
query a server over a Unix domain socket on /var/run/nscd/socket.
the protocol used here is compatible with glibc's nscd protocol on
most systems (all that use 32-bit numbers for all the protocol fields,
which appears to be everything but Alpha).
|
|
|
|
|
|
|
|
|
| |
errno was treated as the error status when the return value of getline
was negative, but this condition can simply indicate EOF and is not
necessarily an error.
the spurious errors caused by this bug masked the bug which was fixed
in commit fc5a96c9c8aa186effad7520d5df6b616bbfd29d.
|