about summary refs log tree commit diff
path: root/src/thread
Commit message (Collapse)AuthorAgeFilesLines
* fix race condition in pthread_killRich Felker2011-06-142-1/+7
| | | | | | | | | | | | | | if thread id was reused by the kernel between the time pthread_kill read it from the userspace pthread_t object and the time of the tgkill syscall, a signal could be sent to the wrong thread. the tgkill syscall was supposed to prevent this race (versus the old tkill syscall) but it can't; it can only help in the case where the tid is reused in a different process, but not when the tid is reused in the same process. the only solution i can see is an extra lock to prevent threads from exiting while another thread is trying to pthread_kill them. it should be very very cheap in the non-contended case.
* run dtors before taking the exit-lock in pthread exitRich Felker2011-06-141-2/+2
| | | | previously a long-running dtor could cause pthread_detach to block.
* minor locking optimizationsRich Felker2011-06-142-2/+2
|
* remove all .size and .type directives for functions from the asmRich Felker2011-06-1310-18/+0
| | | | | these are useless and have caused problems for users trying to build with non-gnu tools like tcc's assembler.
* implement pthread_[sg]etconcurrency.Rich Felker2011-05-302-0/+15
| | | | | | there is a resource limit of 0 bits to store the concurrency level requested. thus any positive level exceeds a resource limit, resulting in EAGAIN. :-)
* optimize out useless default-attribute object in pthread_createRich Felker2011-05-071-7/+7
|
* optimize compound-literal sigset_t's not to contain useless hurd bitsRich Felker2011-05-071-2/+2
|
* overhaul implementation-internal signal protectionsRich Felker2011-05-072-15/+6
| | | | | | | | | | | | | | | | | | | the new approach relies on the fact that the only ways to create sigset_t objects without invoking UB are to use the sig*set() functions, or from the masks returned by sigprocmask, sigaction, etc. or in the ucontext_t argument to a signal handler. thus, as long as sigfillset and sigaddset avoid adding the "protected" signals, there is no way the application will ever obtain a sigset_t including these bits, and thus no need to add the overhead of checking/clearing them when sigprocmask or sigaction is called. note that the old code actually *failed* to remove the bits from sa_mask when sigaction was called. the new implementations are also significantly smaller, simpler, and faster due to ignoring the useless "GNU HURD signals" 65-1024, which are not used and, if there's any sanity in the world, never will be used.
* reduce some ridiculously large spin countsRich Felker2011-05-061-1/+1
| | | | | | these should be tweaked according to testing. offhand i know 1000 is too low and 5000 is likely to be sufficiently high. consider trying to add futexes to file locking, too...
* remove debug code that was missed in barrier commitRich Felker2011-05-061-1/+0
|
* completely new barrier implementation, addressing major correctness issuesRich Felker2011-05-061-16/+44
| | | | | | | | | | | | | | | | | | | | the previous implementation had at least 2 problems: 1. the case where additional threads reached the barrier before the first wave was finished leaving the barrier was untested and seemed not to be working. 2. threads leaving the barrier continued to access memory within the barrier object after other threads had successfully returned from pthread_barrier_wait. this could lead to memory corruption or crashes if the barrier object had automatic storage in one of the waiting threads and went out of scope before all threads finished returning, or if one thread unmapped the memory in which the barrier object lived. the new implementation avoids both problems by making the barrier state essentially local to the first thread which enters the barrier wait, and forces that thread to be the last to return.
* fix initial stack alignment in new threads on x86_64Rich Felker2011-04-221-1/+1
|
* fix minor bugs due to incorrect threaded-predicate semanticsRich Felker2011-04-202-5/+3
| | | | | | | | | | | | some functions that should have been testing whether pthread_self() had been called and initialized the thread pointer were instead testing whether pthread_create() had been called and actually made the program "threaded". while it's unlikely any mismatch would occur in real-world problems, this could have introduced subtle bugs. now, we store the address of the main thread's thread descriptor in the libc structure and use its presence as a flag that the thread register is initialized. note that after fork, the calling thread (not necessarily the original main thread) is the new main thread.
* move some more code out of pthread_create.cRich Felker2011-04-192-7/+4
| | | | this also de-uglifies the dummy function aliasing a bit.
* fix uninitialized waiters field in semaphoresRich Felker2011-04-191-0/+1
|
* recheck cancellation disabled flag after syscall returns EINTRRich Felker2011-04-181-1/+1
| | | | | | | we already checked before making the syscall, but it's possible that a signal handler interrupted the blocking syscall and disabled cancellation, and that this is the cause of EINTR. in this case, the old behavior was testably wrong.
* fix typo in x86_64 cancellable syscall asmRich Felker2011-04-171-1/+1
|
* pthread_exit is not supposed to affect cancellabilityRich Felker2011-04-171-2/+0
| | | | | if the exit was caused by cancellation, __cancel has already set these flags anyway.
* fix pthread_exit from cancellation handlerRich Felker2011-04-171-5/+5
| | | | | cancellation frames were not correctly popped, so this usage would not only loop, but also reuse discarded and invalid parts of the stack.
* clean up handling of thread/nothread mode, lockingRich Felker2011-04-173-16/+10
|
* debloat: use __syscall instead of syscall where possibleRich Felker2011-04-172-2/+2
| | | | | | don't waste time (and significant code size due to function call overhead!) setting errno when the result of a syscall does not matter or when it can't fail.
* fix bugs in cancellable syscall asmRich Felker2011-04-173-11/+12
| | | | | | | | | | | | | | | | x86_64 was just plain wrong in the cancel-flag-already-set path, and crashing. the more subtle error was not clearing the saved stack pointer before returning to c code. this could result in the signal handler misidentifying c code as the pre-syscall part of the asm, and acting on cancellation at the wrong time, and thus resource leak race conditions. also, now __cancel (in the c code) is responsible for clearing the saved sp in the already-cancelled branch. this means we have to use call rather than jmp to ensure the stack pointer in the c will never match what the asm saved.
* optimize cancellation enable/disable codeRich Felker2011-04-173-4/+10
| | | | | | | | | | | | | | | | | | the goal is to be able to use pthread_setcancelstate internally in the implementation, whenever a function might want to use functions which are cancellation points but avoid becoming a cancellation point itself. i could have just used a separate internal function for temporarily inhibiting cancellation, but the solution in this commit is better because (1) it's one less implementation-specific detail in functions that need to use it, and (2) application code can also get the same benefit. previously, pthread_setcancelstate dependend on pthread_self, which would pull in unwanted thread setup overhead for non-threaded programs. now, it temporarily stores the state in the global libc struct if threads have not been initialized, and later moves it if needed. this way we can instead use __pthread_self, which has no dependencies and assumes that the thread register is already valid.
* don't use pthread_once when there is no danger in raceRich Felker2011-04-171-2/+5
|
* fix some minor issues in cancellation handling patchRich Felker2011-04-173-11/+19
| | | | | signals were wrongly left masked, and cancellability state was not switched to disabled, during the execution of cleanup handlers.
* overhaul pthread cancellationRich Felker2011-04-1713-59/+182
| | | | | | | | | | | | | | | | | | | | | | this patch improves the correctness, simplicity, and size of cancellation-related code. modulo any small errors, it should now be completely conformant, safe, and resource-leak free. the notion of entering and exiting cancellation-point context has been completely eliminated and replaced with alternative syscall assembly code for cancellable syscalls. the assembly is responsible for setting up execution context information (stack pointer and address of the syscall instruction) which the cancellation signal handler can use to determine whether the interrupted code was in a cancellable state. these changes eliminate race conditions in the previous generation of cancellation handling code (whereby a cancellation request received just prior to the syscall would not be processed, leaving the syscall to block, potentially indefinitely), and remedy an issue where non-cancellable syscalls made from signal handlers became cancellable if the signal handler interrupted a cancellation point. x86_64 asm is untested and may need a second try to get it right.
* change sem_trywait algorithm so it never has to call __wakeRich Felker2011-04-141-3/+2
|
* cheap trick to further optimize locking normal mutexesRich Felker2011-04-142-2/+2
|
* use a separate signal from SIGCANCEL for SIGEV_THREAD timersRich Felker2011-04-141-2/+0
| | | | | | otherwise we cannot support an application's desire to use asynchronous cancellation within the callback function. this change also slightly debloats pthread_create.c.
* simplify cancellation point handlingRich Felker2011-04-132-16/+5
| | | | | | we take advantage of the fact that unless self->cancelpt is 1, cancellation cannot happen. so just increment it by 2 to temporarily block cancellation. this drops pthread_create.o well under 1k.
* fixed crash in new rsyscall (failure to set sa_flags for signal handler)Rich Felker2011-04-061-0/+2
|
* consistency: change all remaining syscalls to use SYS_ rather than __NR_ prefixRich Felker2011-04-067-8/+8
|
* move rsyscall out of pthread_create moduleRich Felker2011-04-062-96/+122
| | | | | | | | | | | | | | this is something of a tradeoff, as now set*id() functions, rather than pthread_create, are what pull in the code overhead for dealing with linux's refusal to implement proper POSIX thread-vs-process semantics. my motivations are: 1. it's cleaner this way, especially cleaner to optimize out the rsyscall locking overhead from pthread_create when it's not needed. 2. it's expected that only a tiny number of core system programs will ever use set*id() functions, whereas many programs may want to use threads, and making thread overhead tiny is an incentive for "light" programs to try threads.
* pthread exit stuff: don't bother setting errno when we won't check it.Rich Felker2011-04-061-2/+2
|
* fix rsyscall handler: must not clobber errno from signal contextRich Felker2011-04-061-2/+4
|
* major semaphore improvements (performance and correctness)Rich Felker2011-04-065-21/+37
| | | | | 1. make sem_[timed]wait interruptible by signals, per POSIX 2. keep a waiter count in order to avoid unnecessary futex wake syscalls
* new framework to inhibit thread cancellation when neededRich Felker2011-04-052-5/+15
| | | | | | | with these small changes, libc functions which need to call functions which are cancellation points, but which themselves must not be cancellation points, can use the CANCELPT_INHIBIT and CANCELPT_RESUME macros to temporarily inhibit all cancellation.
* pthread_create need not set errnoRich Felker2011-04-031-1/+1
|
* block all signals during rsyscallRich Felker2011-04-031-4/+9
| | | | | otherwise a signal handler could see an inconsistent and nonconformant program state where different threads have different uids/gids.
* fix race condition in rsyscall handlerRich Felker2011-04-031-1/+1
| | | | | | | | | | | | | | | | | | the problem: there is a (single-instruction) race condition window between a thread flagging itself dead and decrementing itself from the thread count. if it receives the rsyscall signal at this exact moment, the rsyscall caller will never succeed in signalling enough flags to succeed, and will deadlock forever. in previous versions of musl, the about-to-terminate thread masked all signals prior to decrementing the thread count, but this cost a whole syscall just to account for extremely rare races. the solution is a huge hack: rather than blocking in the signal handler if the thread is dead, modify the signal mask of the saved context and return in order to prevent further signal handling by the dead thread. this allows the dead thread to continue decrementing the thread count (if it had not yet done so) and exiting, even while the live part of the program blocks for rsyscall.
* don't trust siginfo in rsyscall handlerRich Felker2011-04-031-3/+2
| | | | | | | | for some inexplicable reason, linux allows the sender of realtime signals to spoof its identity. permission checks for sending signals should limit the impact to same-user processes, but just to be safe, we avoid trusting the siginfo structure and instead simply examine the program state to see if we're in the middle of a legitimate rsyscall.
* simplify calling of timer signal handlerRich Felker2011-04-031-7/+4
|
* simplify pthread tsd key handlingRich Felker2011-04-032-8/+6
|
* omit pthread tsd dtor code if tsd is not usedRich Felker2011-04-032-14/+24
|
* simplify setting result on thread cancellationRich Felker2011-04-011-1/+1
|
* use bss instead of mmap for main thread's pthread thread-specific dataRich Felker2011-04-012-9/+4
| | | | this simplifies code and removes a failure case
* fix misspelled PTHREAD_CANCELED constantRich Felker2011-04-011-1/+1
|
* use a_store to set cancel flag in pthread_cancel, to ensure a barrierRich Felker2011-04-011-1/+1
|
* simplify pthread_key_deleteRich Felker2011-03-311-1/+1
| | | | | calling this function on an uninitialized key value is UB, so there is no need to check that the table pointer was initialized.
* greatly simplify pthread_key_create (~20% size reduction)Rich Felker2011-03-311-10/+9
|