| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
| |
this requirement is tucked away in XSH 2.9.5 Thread Cancellation under
the heading Thread Cancellation Cleanup Handlers.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
multi-threaded set*id and setrlimit use the internal __synccall
function to work around the kernel's wrongful treatment of these
process properties as thread-local. the old implementation of
__synccall failed to be AS-safe, despite POSIX requiring setuid and
setgid to be AS-safe, and was not rigorous in assuring that all
threads were caught. in a worst case, threads late in the process of
exiting could retain permissions after setuid reported success, in
which case attacks to regain dropped permissions may have been
possible under the right conditions.
the new implementation of __synccall depends on the presence of
/proc/self/task and will fail if it can't be opened, but is able to
determine that it has caught all threads, and does not use any locks
except its own. it thereby achieves AS-safety simply by blocking
signals to preclude re-entry in the same thread.
with this commit, all known conformance and safety issues in set*id
functions should be fixed.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
based on patch by Jens Gustedt.
the main difficulty here is handling the difference between start
function signatures and thread return types for C11 threads versus
POSIX threads. pointers to void are assumed to be able to represent
faithfully all values of int. the function pointer for the thread
start function is cast to an incorrect type for passing through
pthread_create, but is cast back to its correct type before calling so
that the behavior of the call is well-defined.
changes to the existing threads implementation were kept minimal to
reduce the risk of regressions, and duplication of code that carries
implementation-specific assumptions was avoided for ease and safety of
future maintenance.
|
| |
|
|
|
|
|
|
|
|
| |
The intent of this is to avoid name space pollution of the C threads
implementation.
This has two sides to it. First we have to provide symbols that wouldn't
pollute the name space for the C threads implementation. Second we have
to clean up some internal uses of POSIX functions such that they don't
implicitly drag in such symbols.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
this is analogous commit fffc5cda10e0c5c910b40f7be0d4fa4e15bb3f48
which fixed the corresponding issue for mutexes.
the robust list can't be used here because the locks do not share a
common layout with mutexes. at some point it may make sense to simply
incorporate a mutex object into the FILE structure and use it, but
that would be a much more invasive change, and it doesn't mesh well
with the current design that uses a simpler code path for internal
locking and pulls in the recursive-mutex-like code when the flockfile
API is used explicitly.
|
| |
|
|
|
|
|
|
|
|
| |
the subsequent code in pthread_create and the code which copies TLS
initialization images to the new thread's TLS space assume that the
memory provided to them is zero-initialized, which is true when it's
obtained by pthread_create using mmap. however, when the caller
provides a stack using pthread_attr_setstack, pthread_create cannot
make any assumptions about the contents. simply zero-filling the
relevant memory in this case is the simplest and safest fix.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the kernel always uses non-private wake when walking the robust list
when a thread or process exits, so it's not able to wake waiters
listening with the private futex flag. this problem is solved by doing
the equivalent in userspace as the last step of pthread_exit.
care is taken to remove mutexes from the robust list before unlocking
them so that the kernel will not attempt to access them again,
possibly after another thread locks them. this removal code can treat
the list as singly-linked, since no further code which would add or
remove items is able to run at this point. moreover, the pending
pointer is not needed since the mutexes being unlocked are all
process-local; in the case of asynchronous process termination, they
all cease to exist.
since a process-local robust mutex cannot come into existence without
a call to pthread_mutexattr_setrobust in the same process, the code
for userspace robust list processing is put in that source file, and
a weak alias to a dummy function is used to avoid pulling in this
bloat as part of pthread_exit in static-linked programs.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
previously we detected this bug in configure and issued advice for a
workaround, but this turned out not to work. since then gcc 4.9.0 has
appeared in several distributions, and now 4.9.1 has been released
without a fix despite this being a wrong code generation bug which is
supposed to be a release-blocker, per gcc policy.
since the scope of the bug seems to affect only data objects (rather
than functions) whose definitions are overridable, and there are only
a very small number of these in musl, I am just changing them from
const to volatile for the time being. simply removing the const would
be sufficient to make gcc 4.9.1 work (the non-const case was
inadvertently fixed as part of another change in gcc), and this would
also be sufficient with 4.9.0 if we forced -O0 on the affected files
or on the whole build. however it's cleaner to just remove all the
broken compiler detection and use volatile, which will ensure that
they are never constant-folded. the quality of a non-broken compiler's
output should not be affected except for the fact that these objects
are no longer const and thus possibly add a few bytes to data/bss.
this change can be reconsidered and possibly reverted at some point in
the future when the broken gcc versions are no longer relevant.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the main motivation for this change is to remove the assumption that
the tid of the main thread is also the pid of the process. (the value
returned by the set_tid_address syscall was used to fill both fields
despite it semantically being the tid.) this is historically and
presently true on linux and unlikely to change, but it conceivably
could be false on other systems that otherwise reproduce the linux
syscall api/abi.
only a few parts of the code were actually still using the cached pid.
in a couple places (aio and synccall) it was a minor optimization to
avoid a syscall. caching could be reintroduced, but lazily as part of
the public getpid function rather than at program startup, if it's
deemed important for performance later. in other places (cancellation
and pthread_kill) the pid was completely unnecessary; the tkill
syscall can be used instead of tgkill. this is actually a rather
subtle issue, since tgkill is supposedly a solution to race conditions
that can affect use of tkill. however, as documented in the commit
message for commit 7779dbd2663269b465951189b4f43e70839bc073, tgkill
does not actually solve this race; it just limits it to happening
within one process rather than between processes. we use a lock that
avoids the race in pthread_kill, and the use in the cancellation
signal handler is self-targeted and thus not subject to tid reuse
races, so both are safe regardless of which syscall (tgkill or tkill)
is used.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this commit adds non-stub implementations of setlocale, duplocale,
newlocale, and uselocale, along with the data structures and minimal
code needed for representing the active locale on a per-thread basis
and optimizing the common case where thread-local locale settings are
not in use.
at this point, the data structures only contain what is necessary to
represent LC_CTYPE (a single flag) and LC_MESSAGES (a name for use in
finding message translation files). representation for the other
categories will be added later; the expectation is that a single
pointer will suffice for each.
for LC_CTYPE, the strings "C" and "POSIX" are treated as special; any
other string is accepted and treated as "C.UTF-8". for other
categories, any string is accepted after being truncated to a maximum
supported length (currently 15 bytes). for LC_MESSAGES, the name is
kept regardless of whether libc itself can use such a message
translation locale, since applications using catgets or gettext should
be able to use message locales libc is not aware of. for other
categories, names which are not successfully loaded as locales (which,
at present, means all names) are treated as aliases for "C". setlocale
never fails.
locale settings are not yet used anywhere, so this commit should have
no visible effects except for the contents of the string returned by
setlocale.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the motivation for the errno_ptr field in the thread structure, which
this commit removes, was to allow the main thread's errno to keep its
address when lazy thread pointer initialization was used. &errno was
evaluated prior to setting up the thread pointer and stored in
errno_ptr for the main thread; subsequently created threads would have
errno_ptr pointing to their own errno_val in the thread structure.
since lazy initialization was removed, there is no need for this extra
level of indirection; __errno_location can simply return the address
of the thread's errno_val directly. this does cause &errno to change,
but the change happens before entry to application code, and thus is
not observable.
|
| |
|
|
|
|
|
|
|
|
| |
prior to version 1.1.0, the difference between pthread_self (the
public function) and __pthread_self (the internal macro or inline
function) was that the former would lazily initialize the thread
pointer if it was not already initialized, whereas the latter would
crash in this case. since lazy initialization is no longer supported,
use of pthread_self no longer makes sense; it simply generates larger,
slower code.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this is the first step in an overhaul aimed at greatly simplifying and
optimizing everything dealing with thread-local state.
previously, the thread pointer was initialized lazily on first access,
or at program startup if stack protector was in use, or at certain
random places where inconsistent state could be reached if it were not
initialized early. while believed to be fully correct, the logic was
fragile and non-obvious.
in the first phase of the thread pointer overhaul, support is retained
(and in some cases improved) for systems/situation where loading the
thread pointer fails, e.g. old kernels.
some notes on specific changes:
- the confusing use of libc.main_thread as an indicator that the
thread pointer is initialized is eliminated in favor of an explicit
has_thread_pointer predicate.
- sigaction no longer needs to ensure that the thread pointer is
initialized before installing a signal handler (this was needed to
prevent a situation where the signal handler caused the thread
pointer to be initialized and the subsequent sigreturn cleared it
again) but it still needs to ensure that implementation-internal
thread-related signals are not blocked.
- pthread tsd initialization for the main thread is deferred in a new
manner to minimize bloat in the static-linked __init_tp code.
- pthread_setcancelstate no longer needs special handling for the
situation before the thread pointer is initialized. it simply fails
on systems that cannot support a thread pointer, which are
non-conforming anyway.
- pthread_cleanup_push/pop now check for missing thread pointer and
nop themselves out in this case, so stdio no longer needs to avoid
the cancellable path when the thread pointer is not available.
a number of cases remain where certain interfaces may crash if the
system does not support a thread pointer. at this point, these should
be limited to pthread interfaces, and the number of such cases should
be fewer than before.
|
| |
|
|
|
|
|
|
| |
CLONE_PARENT is not necessary (CLONE_THREAD provides all the useful
parts of it) and Linux treats CLONE_PARENT as an error in certain
situations, without noticing that it would be a no-op due to
CLONE_THREAD. this error case prevents, for example, use of a
multi-threaded init process and certain usages with containers.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
PAGE_SIZE was hardcoded to 4096, which is historically what most
systems use, but on several archs it is a kernel config parameter,
user space can only know it at execution time from the aux vector.
PAGE_SIZE and PAGESIZE are not defined on archs where page size is
a runtime parameter, applications should use sysconf(_SC_PAGE_SIZE)
to query it. Internally libc code defines PAGE_SIZE to libc.page_size,
which is set to aux[AT_PAGESZ] in __init_libc and early in __dynlink
as well. (Note that libc.page_size can be accessed without GOT, ie.
before relocations are done)
Some fpathconf settings are hardcoded to 4096, these should be actually
queried from the filesystem using statfs.
|
| |
|
|
|
|
|
|
|
|
| |
there are several reasons for this change. one is getting rid of the
repetition of the syscall signature all over the place. another is
sharing the constant masks without costly GOT accesses in PIC.
the main motivation, however, is accurately representing whether we
want to block signals that might be handled by the application, or all
signals.
|
| | |
|
| |
|
|
| |
this was simply a case of saving the state in the wrong place.
|
| |
|
|
|
| |
the previous few commits ended up leaving the thread count and signal
mask wrong for atexit handlers and stdio cleanup.
|
| |
|
|
|
|
| |
now that blocking signals prevents any application code from running
while the last thread is exiting, the cas logic is no longer needed to
prevent decrementing below zero.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the thread count (1+libc.threads_minus_1) must always be greater than
or equal to the number of threads which could have application code
running, even in an async-signal-safe sense. there is at least one
dangerous race condition if this invariant fails to hold: dlopen could
allocate too little TLS for existing threads, and a signal handler
running in the exiting thread could claim the allocated TLS for itself
(via __tls_get_addr), leaving too little for the other threads it was
allocated for and thereby causing out-of-bounds access.
there may be other situations where it's dangerous for the thread
count to be too low, particularly in the case where only one thread
should be left, in which case locking may be omitted. however, all
such code paths seem to arise from undefined behavior, since
async-signal-unsafe functions are not permitted to be called from a
signal handler that interrupts pthread_exit (which is itself
async-signal-unsafe).
this change may also simplify logic in __synccall and improve the
chances of making __synccall async-signal-safe.
|
| | |
|
| |
|
|
|
|
| |
this function is mainly (purely?) for obtaining stack address
information, but we also provide the detach state since it's easy to
do anyway.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
the issue at hand is that many syscalls require as an argument the
kernel-ABI size of sigset_t, intended to allow the kernel to switch to
a larger sigset_t in the future. previously, each arch was defining
this size in syscall_arch.h, which was redundant with the definition
of _NSIG in bits/signal.h. as it's used in some not-quite-portable
application code as well, _NSIG is much more likely to be recognized
and understood immediately by someone reading the code, and it's also
shorter and less cluttered.
note that _NSIG is actually 65/129, not 64/128, but the division takes
care of throwing away the off-by-one part.
|
| |
|
|
| |
this bug seems to have been around a long time.
|
| |
|
|
|
| |
this bug was introduced when support for application-provided stacks
was originally added.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the main goal of these changes is to address the case where an
application provides a stack of size N, but TLS has size M that's a
significant portion of the size N (or even larger than N), thus giving
the application less stack space than it expected or no stack at all!
the new strategy pthread_create now uses is to only put TLS on the
application-provided stack if TLS is smaller than 1/8 of the stack
size or 2k, whichever is smaller. this ensures that the application
always has "close enough" to what it requested, and the threshold is
chosen heuristically to make sure "sane" amounts of TLS still end up
in the application-provided stack.
if TLS does not fit the above criteria, pthread_create uses mmap to
obtain space for TLS, but still uses the application-provided stack
for actual call frame stack. this is to avoid wasting memory, and for
the sake of supporting ugly hacks like garbage collection based on
assumptions that the implementation will use the provided stack range.
in order for the above heuristics to ever succeed, the amount of TLS
space wasted on POSIX TSD (pthread_key_create based) needed to be
reduced. otherwise, these changes would preclude any use of
pthread_create without mmap, which would have serious memory usage and
performance costs for applications trying to create huge numbers of
threads using pre-allocated stack space. the new value of
PTHREAD_KEYS_MAX is the minimum allowed by POSIX, 128. this should
still be plenty more than real-world applications need, especially now
that C11/gcc-style TLS is now supported in musl, and most apps and
libraries choose to use that instead of POSIX TSD when available.
at the same time, PTHREAD_STACK_MIN has been decreased. it was
originally set to PAGE_SIZE back when there was no support for TLS or
application-provided stacks, and requests smaller than a whole page
did not make sense. now, there are two good reasons to support
requests smaller than a page: (1) applications could provide
pre-allocated stacks smaller than a page, and (2) with smaller stack
sizes, stack+TLS+TSD can all fit in one page, making it possible for
applications which need huge numbers of threads with minimal stack
needs to allocate exactly one page per thread. the new value of
PTHREAD_STACK_MIN, 2k, is aligned with the minimum size for
sigaltstack.
|
| |
|
|
|
|
|
|
|
|
| |
linux's sched_* syscalls actually implement the TPS (thread
scheduling) functionality, not the PS (process scheduling)
functionality which the sched_* functions are supposed to have.
omitting support for the PS option (and having the sched_* interfaces
fail with ENOSYS rather than omitting them, since some broken software
assumes they exist) seems to be the only conforming way to do this on
linux.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
this mirrors the stdio_impl.h cleanup. one header which is not
strictly needed, errno.h, is left in pthread_impl.h, because since
pthread functions return their error codes rather than using errno,
nearly every single pthread function needs the errno constants.
in a few places, rather than bringing in string.h to use memset, the
memset was replaced by direct assignment. this seems to generate much
better code anyway, and makes many functions which were previously
non-leaf functions into leaf functions (possibly eliminating a great
deal of bloat on some platforms where non-leaf functions require ugly
prologue and/or epilogue).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
despite documentation that makes it sound a lot different, the only
ABI-constraint difference between TLS variants II and I seems to be
that variant II stores the initial TLS segment immediately below the
thread pointer (i.e. the thread pointer points to the end of it) and
variant I stores the initial TLS segment above the thread pointer,
requiring the thread descriptor to be stored below. the actual value
stored in the thread pointer register also tends to have per-arch
random offsets applied to it for silly micro-optimization purposes.
with these changes applied, TLS should be basically working on all
supported archs except microblaze. I'm still working on getting the
necessary information and a working toolchain that can build TLS
binaries for microblaze, but in theory, static-linked programs with
TLS and dynamic-linked programs where only the main executable uses
TLS should already work on microblaze.
alignment constraints have not yet been heavily tested, so it's
possible that this code does not always align TLS segments correctly
on archs that need TLS variant I.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the code in __libc_start_main is now responsible for parsing auxv,
rather than duplicating the parsing all over the place. this should
shave off a few cycles and some code size. __init_libc is left as an
external-linkage function despite the fact that it could be static, to
prevent it from being inlined and permanently wasting stack space when
main is called.
a few other minor changes are included, like eliminating per-thread
ssp canaries (they were likely broken when combined with certain
dlopen usages, and completely unnecessary) and some other unnecessary
checks. since this code gets linked into every program, it should be
as small and simple as possible.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
unlike other implementations, this one reserves memory for new TLS in
all pre-existing threads at dlopen-time, and dlopen will fail with no
resources consumed and no new libraries loaded if memory is not
available. memory is not immediately distributed to running threads;
that would be too complex and too costly. instead, assurances are made
that threads needing the new TLS can obtain it in an async-signal-safe
way from a buffer belonging to the dynamic linker/new module (via
atomic fetch-and-add based allocator).
I've re-appropriated the lock that was previously used for __synccall
(synchronizing set*id() syscalls between threads) as a general
pthread_create lock. it's a "backwards" rwlock where the "read"
operation is safe atomic modification of the live thread count, which
multiple threads can perform at the same time, and the "write"
operation is making sure the count does not increase during an
operation that depends on it remaining bounded (__synccall or dlopen).
in static-linked programs that don't use __synccall, this lock is a
no-op and has no cost.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
the design for TLS in dynamic-linked programs is mostly complete too,
but I have not yet implemented it. cost is nonzero but still low for
programs which do not use TLS and/or do not use threads (a few hundred
bytes of new code, plus dependency on memcpy). i believe it can be
made smaller at some point by merging __init_tls and __init_security
into __libc_start_main and avoiding duplicate auxv-parsing code.
at the same time, I've also slightly changed the logic pthread_create
uses to allocate guard pages to ensure that guard pages are not
counted towards commit charge.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
note that POSIX does not specify these functions as _Noreturn, because
POSIX is aligned with C99, not the new C11 standard. when POSIX is
eventually updated to C11, it will almost surely give these functions
the _Noreturn attribute. for now, the actual _Noreturn keyword is not
used anyway when compiling with a c99 compiler, which is what POSIX
requires; the GCC __attribute__ is used instead if it's available,
however.
in a few places, I've added infinite for loops at the end of _Noreturn
functions to silence compiler warnings. presumably
__buildin_unreachable could achieve the same thing, but it would only
work on newer GCCs and would not be portable. the loops should have
near-zero code size cost anyway.
like the previous _Noreturn commit, this one is based on patches
contributed by philomath.
|
| |
|
|
|
|
|
|
| |
to deal with the fact that the public headers may be used with pre-c99
compilers, __restrict is used in place of restrict, and defined
appropriately for any supported compiler. we also avoid the form
[restrict] since older versions of gcc rejected it due to a bug in the
original c99 standard, and instead use the form *restrict.
|
| |
|
|
|
|
|
|
|
|
| |
some minor changes to how hard-coded sets for thread-related purposes
are handled were also needed, since the old object sizes were not
necessarily sufficient. things have gotten a bit ugly in this area,
and i think a cleanup is in order at some point, but for now the goal
is just to get the code working on all supported archs including mips,
which was badly broken by linux rejecting syscalls with the wrong
sigset_t size.
|
| |
|
|
|
|
| |
these could have caused memory corruption due to invalid accesses to
the next field. all should be fixed now; I found the errors with fgrep
-r '__lock(&', which is bogus since the argument should be an array.
|
| |
|
|
|
|
|
| |
after the thread unmaps its own stack/thread structure, the kernel,
performing child tid clear and futex wake, could clobber a new mapping
made at the same location as the just-removed thread's tid field.
disable kernel clearing of child tid to prevent this.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
i originally omitted these (optional, per POSIX) interfaces because i
considered them backwards implementation details. however, someone
later brought to my attention a fairly legitimate use case: allocating
thread stacks in memory that's setup for sharing and/or fast transfer
between CPU and GPU so that the thread can move data to a GPU directly
from automatic-storage buffers without having to go through additional
buffer copies.
perhaps there are other situations in which these interfaces are
useful too.
|
| |
|
|
|
|
|
| |
this action is now performed in pthread_self initialization; it must
be performed there in case the first call to pthread_create is from a
signal handler, in which case the old signal mask could be restored on
return from the signal.
|
| |
|
|
|
| |
no need to pass unnecessary extra arguments on to the core code in
pthread_create.c. this just wastes cycles and code bloat.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
this change is necessary or pthread_create will always fail on
security-hardened kernels. i considered first trying to make the stack
executable and simply retrying without execute permissions when the
first try fails, but (1) this would incur a serious performance
penalty on hardened systems, and (2) having the stack be executable is
just a bad idea from a security standpoint.
if there is real-world "GNU C" code that uses nested functions with
threads, and it can't be fixed, we'll have to consider other ways of
solving the problem, but for now this seems like the best fix.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
pthread structure has been adjusted to match the glibc/GCC abi for
where the canary is stored on i386 and x86_64. it will need variants
for other archs to provide the added security of the canary's entropy,
but even without that it still works as well as the old "minimal" ssp
support. eventually such changes will be made anyway, since they are
also needed for GCC/C11 thread-local storage support (not yet
implemented).
care is taken not to attempt initializing the thread pointer unless
the program actually uses SSP (by reference to __stack_chk_fail).
|
| | |
|
| |
|
|
|
|
|
| |
even if pthread_create/exit code is not linked, run flag needs to be
checked and cleanup function potentially run on pop. thus, move the
code to the module that's always linked when pthread_cleanup_push/pop
is used.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the old abi was intended to duplicate glibc's abi at the expense of
being ugly and slow, but it turns out glib was not even using that abi
except on non-gcc-compatible compilers (which it doesn't even support)
and was instead using an exceptions-in-c/unwind-based approach whose
abi we could not duplicate anyway without nasty dwarf2/unwind
integration.
the new abi is copied from a very old glibc abi, which seems to still
be supported/present in current glibc. it avoids all unwinding,
whether by sjlj or exceptions, and merely maintains a linked list of
cleanup functions to be called from the context of pthread_exit. i've
made some care to ensure that longjmp out of a cleanup function should
work, even though it is not required to.
this change breaks abi compatibility with programs which were using
pthread cancellation, which is unfortunate, but that's why i'm making
the change now rather than later. considering that most pthread
features have not been usable until recently anyway, i don't see it as
a major issue at this point.
|
