| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
i originally omitted these (optional, per POSIX) interfaces because i
considered them backwards implementation details. however, someone
later brought to my attention a fairly legitimate use case: allocating
thread stacks in memory that's setup for sharing and/or fast transfer
between CPU and GPU so that the thread can move data to a GPU directly
from automatic-storage buffers without having to go through additional
buffer copies.
perhaps there are other situations in which these interfaces are
useful too.
|
| |
|
|
|
|
|
| |
this action is now performed in pthread_self initialization; it must
be performed there in case the first call to pthread_create is from a
signal handler, in which case the old signal mask could be restored on
return from the signal.
|
| |
|
|
|
| |
no need to pass unnecessary extra arguments on to the core code in
pthread_create.c. this just wastes cycles and code bloat.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
this change is necessary or pthread_create will always fail on
security-hardened kernels. i considered first trying to make the stack
executable and simply retrying without execute permissions when the
first try fails, but (1) this would incur a serious performance
penalty on hardened systems, and (2) having the stack be executable is
just a bad idea from a security standpoint.
if there is real-world "GNU C" code that uses nested functions with
threads, and it can't be fixed, we'll have to consider other ways of
solving the problem, but for now this seems like the best fix.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
pthread structure has been adjusted to match the glibc/GCC abi for
where the canary is stored on i386 and x86_64. it will need variants
for other archs to provide the added security of the canary's entropy,
but even without that it still works as well as the old "minimal" ssp
support. eventually such changes will be made anyway, since they are
also needed for GCC/C11 thread-local storage support (not yet
implemented).
care is taken not to attempt initializing the thread pointer unless
the program actually uses SSP (by reference to __stack_chk_fail).
|
| | |
|
| |
|
|
|
|
|
| |
even if pthread_create/exit code is not linked, run flag needs to be
checked and cleanup function potentially run on pop. thus, move the
code to the module that's always linked when pthread_cleanup_push/pop
is used.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the old abi was intended to duplicate glibc's abi at the expense of
being ugly and slow, but it turns out glib was not even using that abi
except on non-gcc-compatible compilers (which it doesn't even support)
and was instead using an exceptions-in-c/unwind-based approach whose
abi we could not duplicate anyway without nasty dwarf2/unwind
integration.
the new abi is copied from a very old glibc abi, which seems to still
be supported/present in current glibc. it avoids all unwinding,
whether by sjlj or exceptions, and merely maintains a linked list of
cleanup functions to be called from the context of pthread_exit. i've
made some care to ensure that longjmp out of a cleanup function should
work, even though it is not required to.
this change breaks abi compatibility with programs which were using
pthread cancellation, which is unfortunate, but that's why i'm making
the change now rather than later. considering that most pthread
features have not been usable until recently anyway, i don't see it as
a major issue at this point.
|
| |
|
|
|
| |
mmap returns MAP_FAILED not 0 because some idiot thought the ability
to mmap the null pointer page would be a good idea...
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
several things are changed. first, i have removed the old __uniclone
function signature and replaced it with the "standard" linux
__clone/clone signature. this was necessary to expose clone to
applications anyway, and it makes it easier to port __clone to new
archs, since it's now testable independently of pthread_create.
secondly, i have removed all references to the ugly ldt descriptor
structure (i386 only) from the c code and pthread structure. in places
where it is needed, it is now created on the stack just when it's
needed, in assembly code. thus, the i386 __clone function takes the
desired thread pointer as its argument, rather than an ldt descriptor
pointer, just like on all other sane archs. this should not affect
applications since there is really no way an application can use clone
with threads/tls in a way that doesn't horribly conflict with and
clobber the underlying implementation's use. applications are expected
to use clone only for creating actual processes, possibly with new
namespace features and whatnot.
|
| |
|
|
|
|
|
|
|
| |
fix up clone signature to match the actual behavior. the new
__syncall_wait function allows a __synccall callback to wait for other
threads to continue without returning, so that it can resume action
after the caller finishes. this interface could be made significantly
more general/powerful with minimal effort, but i'll wait to do that
until it's actually useful for something.
|
| |
|
|
|
|
|
| |
cleanup push and pop are also no-ops if pthread_exit is not reachable.
this can make a big difference for library code which needs to protect
itself against cancellation, but which is unlikely to actually be used
in programs with threads/cancellation.
|
| | |
|
| |
|
|
|
|
|
| |
previously, pthread_cleanup_push/pop were pulling in all of
pthread_create due to dependency on the __pthread_unwind_next
function. this was not needed, as cancellation cleanup handlers can
never be called unless pthread_exit or pthread_cancel is reachable.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
previously, stdio used spinlocks, which would be unacceptable if we
ever add support for thread priorities, and which yielded
pathologically bad performance if an application attempted to use
flockfile on a key file as a major/primary locking mechanism.
i had held off on making this change for fear that it would hurt
performance in the non-threaded case, but actually support for
recursive locking had already inflicted that cost. by having the
internal locking functions store a flag indicating whether they need
to perform unlocking, rather than using the actual recursive lock
counter, i was able to combine the conditionals at unlock time,
eliminating any additional cost, and also avoid a nasty corner case
where a huge number of calls to ftrylockfile could cause deadlock
later at the point of internal locking.
this commit also fixes some issues with usage of pthread_self
conflicting with __attribute__((const)) which resulted in crashes with
some compiler versions/optimizations, mainly in flockfile prior to
pthread_create.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
changing credentials in a multi-threaded program is extremely
difficult on linux because it requires synchronizing the change
between all threads, which have their own thread-local credentials on
the kernel side. this is further complicated by the fact that changing
the real uid can fail due to exceeding RLIMIT_NPROC, making it
possible that the syscall will succeed in some threads but fail in
others.
the old __rsyscall approach being replaced was robust in that it would
report failure if any one thread failed, but in this case, the program
would be left in an inconsistent state where individual threads might
have different uid. (this was not as bad as glibc, which would
sometimes even fail to report the failure entirely!)
the new approach being committed refuses to change real user id when
it cannot temporarily set the rlimit to infinity. this is completely
POSIX conformant since POSIX does not require an implementation to
allow real-user-id changes for non-privileged processes whatsoever.
still, setting the real uid can fail due to memory allocation in the
kernel, but this can only happen if there is not already a cached
object for the target user. thus, we forcibly serialize the syscalls
attempts, and fail the entire operation on the first failure. this
*should* lead to an all-or-nothing success/failure result, but it's
still fragile and highly dependent on kernel developers not breaking
things worse than they're already broken.
ideally linux will eventually add a CLONE_USERCRED flag that would
give POSIX conformant credential changes without any hacks from
userspace, and all of this code would become redundant and could be
removed ~10 years down the line when everyone has abandoned the old
broken kernels. i'm not holding my breath...
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
if thread id was reused by the kernel between the time pthread_kill
read it from the userspace pthread_t object and the time of the tgkill
syscall, a signal could be sent to the wrong thread. the tgkill
syscall was supposed to prevent this race (versus the old tkill
syscall) but it can't; it can only help in the case where the tid is
reused in a different process, but not when the tid is reused in the
same process.
the only solution i can see is an extra lock to prevent threads from
exiting while another thread is trying to pthread_kill them. it should
be very very cheap in the non-contended case.
|
| |
|
|
| |
previously a long-running dtor could cause pthread_detach to block.
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the new approach relies on the fact that the only ways to create
sigset_t objects without invoking UB are to use the sig*set()
functions, or from the masks returned by sigprocmask, sigaction, etc.
or in the ucontext_t argument to a signal handler. thus, as long as
sigfillset and sigaddset avoid adding the "protected" signals, there
is no way the application will ever obtain a sigset_t including these
bits, and thus no need to add the overhead of checking/clearing them
when sigprocmask or sigaction is called.
note that the old code actually *failed* to remove the bits from
sa_mask when sigaction was called.
the new implementations are also significantly smaller, simpler, and
faster due to ignoring the useless "GNU HURD signals" 65-1024, which
are not used and, if there's any sanity in the world, never will be
used.
|
| |
|
|
| |
this also de-uglifies the dummy function aliasing a bit.
|
| |
|
|
|
| |
if the exit was caused by cancellation, __cancel has already set these
flags anyway.
|
| |
|
|
|
| |
cancellation frames were not correctly popped, so this usage would not
only loop, but also reuse discarded and invalid parts of the stack.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this patch improves the correctness, simplicity, and size of
cancellation-related code. modulo any small errors, it should now be
completely conformant, safe, and resource-leak free.
the notion of entering and exiting cancellation-point context has been
completely eliminated and replaced with alternative syscall assembly
code for cancellable syscalls. the assembly is responsible for setting
up execution context information (stack pointer and address of the
syscall instruction) which the cancellation signal handler can use to
determine whether the interrupted code was in a cancellable state.
these changes eliminate race conditions in the previous generation of
cancellation handling code (whereby a cancellation request received
just prior to the syscall would not be processed, leaving the syscall
to block, potentially indefinitely), and remedy an issue where
non-cancellable syscalls made from signal handlers became cancellable
if the signal handler interrupted a cancellation point.
x86_64 asm is untested and may need a second try to get it right.
|
| |
|
|
|
|
| |
otherwise we cannot support an application's desire to use
asynchronous cancellation within the callback function. this change
also slightly debloats pthread_create.c.
|
| |
|
|
|
|
| |
we take advantage of the fact that unless self->cancelpt is 1,
cancellation cannot happen. so just increment it by 2 to temporarily
block cancellation. this drops pthread_create.o well under 1k.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
this is something of a tradeoff, as now set*id() functions, rather
than pthread_create, are what pull in the code overhead for dealing
with linux's refusal to implement proper POSIX thread-vs-process
semantics. my motivations are:
1. it's cleaner this way, especially cleaner to optimize out the
rsyscall locking overhead from pthread_create when it's not needed.
2. it's expected that only a tiny number of core system programs will
ever use set*id() functions, whereas many programs may want to use
threads, and making thread overhead tiny is an incentive for "light"
programs to try threads.
|
| | |
|
| | |
|
| |
|
|
|
|
|
| |
with these small changes, libc functions which need to call functions
which are cancellation points, but which themselves must not be
cancellation points, can use the CANCELPT_INHIBIT and CANCELPT_RESUME
macros to temporarily inhibit all cancellation.
|
| | |
|
| |
|
|
|
| |
otherwise a signal handler could see an inconsistent and nonconformant
program state where different threads have different uids/gids.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the problem: there is a (single-instruction) race condition window
between a thread flagging itself dead and decrementing itself from the
thread count. if it receives the rsyscall signal at this exact moment,
the rsyscall caller will never succeed in signalling enough flags to
succeed, and will deadlock forever. in previous versions of musl, the
about-to-terminate thread masked all signals prior to decrementing
the thread count, but this cost a whole syscall just to account for
extremely rare races.
the solution is a huge hack: rather than blocking in the signal
handler if the thread is dead, modify the signal mask of the saved
context and return in order to prevent further signal handling by the
dead thread. this allows the dead thread to continue decrementing the
thread count (if it had not yet done so) and exiting, even while the
live part of the program blocks for rsyscall.
|
| |
|
|
|
|
|
|
| |
for some inexplicable reason, linux allows the sender of realtime
signals to spoof its identity. permission checks for sending signals
should limit the impact to same-user processes, but just to be safe,
we avoid trusting the siginfo structure and instead simply examine the
program state to see if we're in the middle of a legitimate rsyscall.
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
- there is no longer any risk of spoofing cancellation requests, since
the cancel flag is set in pthread_cancel rather than in the signal
handler.
- cancellation signal is no longer unblocked when running the
cancellation handlers. instead, pthread_create will cause any new
threads created from a cancellation handler to unblock their own
cancellation signal.
- various tweaks in preparation for POSIX timer support.
|
| |
|
|
|
|
|
|
| |
glibc made the ridiculous choice to use pass-by-register calling
convention for these functions, which is impossible to duplicate
directly on non-gcc compilers. instead, we use ugly asm to wrap and
convert the calling convention. presumably this works with every
compiler anyone could potentially want to use.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this commit addresses two issues:
1. a race condition, whereby a cancellation request occurring after a
syscall returned from kernelspace but before the subsequent
CANCELPT_END would cause cancellable resource-allocating syscalls
(like open) to leak resources.
2. signal handlers invoked while the thread was blocked at a
cancellation point behaved as if asynchronous cancellation mode wer in
effect, resulting in potentially dangerous state corruption if a
cancellation request occurs.
the glibc/nptl implementation of threads shares both of these issues.
with this commit, both are fixed. however, cancellation points
encountered in a signal handler will not be acted upon if the signal
was received while the thread was already at a cancellation point.
they will of course be acted upon after the signal handler returns, so
in real-world usage where signal handlers quickly return, it should
not be a problem. it's possible to solve this problem too by having
sigaction() wrap all signal handlers with a function that uses a
pthread_cleanup handler to catch cancellation, patch up the saved
context, and return into the cancellable function that will catch and
act upon the cancellation. however that would be a lot of complexity
for minimal if any benefit...
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
with this patch, the syscallN() functions are no longer needed; a
variadic syscall() macro allows syscalls with anywhere from 0 to 6
arguments to be made with a single macro name. also, manually casting
each non-integer argument with (long) is no longer necessary; the
casts are hidden in the macros.
some source files which depended on being able to define the old macro
SYSCALL_RETURNS_ERRNO have been modified to directly use __syscall()
instead of syscall(). references to SYSCALL_SIGSET_SIZE and SYSCALL_LL
have also been changed.
x86_64 has not been tested, and may need a follow-up commit to fix any
minor bugs/oversights.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this commit shuffles around the location of syscall definitions so
that we can make a syscall() library function with both SYS_* and
__NR_* style syscall names available to user applications, provides
the syscall() library function, and optimizes the code that performs
the actual inline syscalls in the library itself.
previously on i386 when built as PIC (shared library), syscalls were
incurring bus lock (lock prefix) overhead at entry and exit, due to
the way the ebx register was being loaded (xchg instruction with a
memory operand). now the xchg takes place between two registers.
further cleanup to arch/$(ARCH)/syscall.h is planned.
|
| | |
|
| | |
|
