| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
| |
the changes here are semantically and structurally identical to those
made to timer_settime and timer_gettime for time64 support.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
time64 syscall is used only if it's the only one defined for the arch,
or if the requested timeout length does not fit in 32 bits. on current
32-bit archs where time_t is a 32-bit type, this makes it statically
unreachable.
on 64-bit archs, there are only superficial changes to the code after
preprocessing. both before and after these changes, these functions
copied their timeout arguments to avoid letting the kernel clobber the
caller's copies. now, the copying also serves to change the type from
userspace timespec to a pair of longs, which makes a difference only
in the 32-bit fallback case, not on 64-bit.
|
|
|
|
|
|
|
|
|
| |
this is yet another place where special handling of time syscalls can
and should be avoided by implementing legacy functions in terms of
their modern replacements. in theory a fallback to SYS_settimeofday
could be added to clock_settime, but SYS_clock_settime has been
available since Linux 2.6.0 or earlier, i.e. all the way back to the
minimum supported version.
|
|
|
|
|
| |
this removes the assumption that userspace struct timex matches the
syscall type and sets the stage for 64-bit time_t on 32-bit archs.
|
|
|
|
|
|
| |
this sets the stage for having the conversion logic for 64-bit time_t
all in one file, and as a bonus makes clock_adjtime for CLOCK_REALTIME
work even on kernels too old to have the clock_adjtime syscall.
|
|
|
|
|
|
|
|
| |
the linux syscall treats this argument as having type int, so passing
extremely long buffer sizes would be misinterpreted by the kernel.
since "short reads" are always acceptable, just cap it down.
patch based on report and suggested change by Florian Weimer.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Author: Alex Suykov <alex.suykov@gmail.com>
Author: Aric Belsito <lluixhi@gmail.com>
Author: Drew DeVault <sir@cmpwn.com>
Author: Michael Clark <mjc@sifive.com>
Author: Michael Forney <mforney@mforney.org>
Author: Stefan O'Rear <sorear2@gmail.com>
This port has involved the work of many people over several years. I
have tried to ensure that everyone with substantial contributions has
been credited above; if any omissions are found they will be noted
later in an update to the authors/contributors list in the COPYRIGHT
file.
The version committed here comes from the riscv/riscv-musl repo's
commit 3fe7e2c75df78eef42dcdc352a55757729f451e2, with minor changes by
me for issues found during final review:
- a_ll/a_sc atomics are removed (according to the ISA spec, lr/sc
are not safe to use in separate inline asm fragments)
- a_cas[_p] is fixed to be a memory barrier
- the call from the _start assembly into the C part of crt1/ldso is
changed to allow for the possibility that the linker does not place
them nearby each other.
- DTP_OFFSET is defined correctly so that local-dynamic TLS works
- reloc.h LDSO_ARCH logic is simplified and made explicit.
- unused, non-functional crti/n asm files are removed.
- an empty .sdata section is added to crt1 so that the
__global_pointer reference is resolvable.
- indentation style errors in some asm files are fixed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
this is a workaround to avoid a crashing regression on qemu-user when
dynamic TLS is installed at dlopen time. the sigaction syscall should
not be able to fail, but it does fail for implementation-internal
signals under qemu user-level emulation if the host libc qemu is
running under reserves the same signals for implementation-internal
use, since qemu makes no provision to redirect/emulate them. after
sigaction fails, the subsequent tkill would terminate the process
abnormally as the default action.
no provision to account for membarrier failing is made in the dynamic
linker code that installs new TLS. at the formal level, the missing
barrier in this case is incorrect, and perhaps we should fail the
dlopen operation, but in practice all the archs we support (and
probably all real-world archs except alpha, which isn't yet supported)
should give the right behavior with no barrier at all as a consequence
of consume-order properties.
in the long term, this workaround should be supplemented or replaced
by something better -- a different fallback approach to ensuring
memory consistency, or dynamic allocation of implementation-internal
signals. the latter is appealing in that it would allow cancellation
to work under qemu-user too, and would even allow many levels of
nested emulation.
|
|
|
|
|
|
|
|
|
|
| |
the motivation for this change is twofold. first, it gets the fallback
logic out of the dynamic linker, improving code readability and
organization. second, it provides application code that wants to use
the membarrier syscall, which depends on preregistration of intent
before the process becomes multithreaded unless unbounded latency is
acceptable, with a symbol that, when linked, ensures that this
registration happens.
|
| |
|
|
|
|
|
|
| |
the LFS64 macro was not self-documenting and barely saved any
characters. simply use weak_alias directly so that it's clear what's
being done, and doesn't depend on a header to provide a strange macro.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
libc.h was intended to be a header for access to global libc state and
related interfaces, but ended up included all over the place because
it was the way to get the weak_alias macro. most of the inclusions
removed here are places where weak_alias was needed. a few were
recently introduced for hidden. some go all the way back to when
libc.h defined CANCELPT_BEGIN and _END, and all (wrongly implemented)
cancellation points had to include it.
remaining spurious users are mostly callers of the LOCK/UNLOCK macros
and files that use the LFS64 macro to define the awful *64 aliases.
in a few places, new inclusion of libc.h is added because several
internal headers no longer implicitly include libc.h.
declarations for __lockfile and __unlockfile are moved from libc.h to
stdio_impl.h so that the latter does not need libc.h. putting them in
libc.h made no sense at all, since the macros in stdio_impl.h are
needed to use them correctly anyway.
|
|
|
|
|
|
| |
the __-prefixed filename does not make sense when the only purpose of
this file is implementing a public function that's not used as a
backend for implementing the standard dirent functions.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commits leading up to this one have moved the vast majority of
libc-internal interface declarations to appropriate internal headers,
allowing them to be type-checked and setting the stage to limit their
visibility. the ones that have not yet been moved are mostly
namespace-protected aliases for standard/public interfaces, which
exist to facilitate implementing plain C functions in terms of POSIX
functionality, or C or POSIX functionality in terms of extensions that
are not standardized. some don't quite fit this description, but are
"internally public" interfacs between subsystems of libc.
rather than create a number of newly-named headers to declare these
functions, and having to add explicit include directives for them to
every source file where they're needed, I have introduced a method of
wrapping the corresponding public headers.
parallel to the public headers in $(srcdir)/include, we now have
wrappers in $(srcdir)/src/include that come earlier in the include
path order. they include the public header they're wrapping, then add
declarations for namespace-protected versions of the same interfaces
and any "internally public" interfaces for the subsystem they
correspond to.
along these lines, the wrapper for features.h is now responsible for
the definition of the hidden, weak, and weak_alias macros. this means
source files will no longer need to include any special headers to
access these features.
over time, it is my expectation that the scope of what is "internally
public" will expand, reducing the number of source files which need to
include *_impl.h and related headers down to those which are actually
implementing the corresponding subsystems, not just using them.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
policy is that all public functions which have a public declaration
should be defined in a context where that public declaration is
visible, to avoid preventable type mismatches.
an audit performed using GCC's -Wmissing-declarations turned up the
violations corrected here. in some cases the public header had not
been included; in others, a feature test macro needed to make the
declaration visible had been omitted.
in the case of gethostent and getnetent, the omission seems to have
been intentional, as a hack to admit a single stub definition for both
functions. this kind of hack is no longer acceptable; it's UB and
would not fly with LTO or advanced toolchains. the hack is undone to
make exposure of the declarations possible.
|
|
|
|
| |
memfd_create was added in linux v3.17 and glibc has api for it.
|
|
|
|
|
|
|
|
| |
mlock2 syscall was added in linux v4.4 and glibc has api for it.
It falls back to mlock in case of flags==0, so that case works
even on older kernels.
MLOCK_ONFAULT is moved under _GNU_SOURCE following glibc.
|
|
|
|
|
| |
This syscall is available since Linux 3.17 and was also implemented in
glibc in version 2.25 using the same interfaces.
|
| |
|
|
|
|
|
| |
all such arch-specific translation units are being moved to
appropriate arch dirs under the main src tree.
|
|
|
|
|
|
| |
being nonstandard, the closest thing to a specification for this
function is its man page, which documents it as returning int. it can
fail with EBADF if the file descriptor passed is invalid.
|
| |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
On 32 bit mips the kernel uses -1UL/2 to mark RLIM_INFINITY (and
this is the definition in the userspace api), but since it is in
the middle of the valid range of limits and limits are often
compared with relational operators, various kernel side logic is
broken if larger than -1UL/2 limits are used. So we truncate the
limits to -1UL/2 in get/setrlimit and prlimit.
Even if the kernel side logic consistently treated -1UL/2 as greater
than any other limit value, there wouldn't be any clean workaround
that allowed using large limits:
* using -1UL/2 as RLIM_INFINITY in userspace would mean different
infinity value for get/setrlimt and prlimit (where infinity is always
-1ULL) and userspace logic could break easily (just like the kernel
is broken now) and more special case code would be needed for mips.
* translating -1UL/2 kernel side value to -1ULL in userspace would
mean that -1UL/2 limit cannot be set (eg. -1UL/2+1 had to be passed
to the kernel instead).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
such archs are expected to omit definitions of the SYS_* macros for
syscalls their kernels lack from arch/$ARCH/bits/syscall.h. the
preprocessor is then able to select the an appropriate implementation
for affected functions. two basic strategies are used on a
case-by-case basis:
where the old syscalls correspond to deprecated library-level
functions, the deprecated functions have been converted to wrappers
for the modern function, and the modern function has fallback code
(omitted at the preprocessor level on new archs) to make use of the
old syscalls if the new syscall fails with ENOSYS. this also improves
functionality on older kernels and eliminates the incentive to program
with deprecated library-level functions for the sake of compatibility
with older kernels.
in other situations where the old syscalls correspond to library-level
functions which are not deprecated but merely lack some new features,
such as the *at functions, the old syscalls are still used on archs
which support them. this may change at some point in the future if or
when fallback code is added to the new functions to make them usable
(possibly with reduced functionality) on old kernels.
|
|
|
|
|
|
|
|
|
|
|
| |
it will be needed to implement some things in sysconf, and the syscall
can't easily be used directly because the x32 syscall uses the wrong
structure layout. the l (uncreative, for "linux") prefix is used since
the symbol name __sysinfo is already taken for AT_SYSINFO from the aux
vector.
the way the x32 override of this function works is also changed to be
simpler and avoid the useless jump instruction.
|
|
|
|
|
|
|
|
| |
the kernel uses long longs in the struct, but the documentation
says they're long. so we need to fixup the mismatch between the
userspace and kernelspace structs.
since the struct offers a mem_unit member, we can avoid truncation
by adjusting that value.
|
|
|
|
|
|
|
|
|
|
|
|
| |
The architecture-specific assembly versions of clone did not set errno on
failure, which is inconsistent with glibc. __clone still returns the error
via its return value, and clone is now a wrapper that sets errno as needed.
The public clone has also been moved to src/linux, as it's not directly
related to the pthreads API.
__clone is called by pthread_create, which does not report errors via
errno. Though not strictly necessary, it's nice to avoid clobbering errno
here.
|
|
|
|
|
|
|
| |
it's unclear what the historical signature for this function was, but
semantically, the argument should be a pointer to const, and this is
what glibc uses. correct programs should not be using this function
anyway, so it's unlikely to matter.
|
|
|
|
|
| |
both the kernel and glibc agree that this argument is unsigned; the
incorrect type ssize_t came from erroneous man pages.
|
|
|
|
|
|
| |
this was wrong since the original commit adding inotify, and I don't
see any explanation for it. not even the man pages have it wrong. it
was most likely a copy-and-paste error.
|
| |
|
|
|
|
|
|
| |
the header is included only as a guard to check that the declaration
and definition match, so the typo didn't cause any breakage aside
from omitting this check.
|
|
|
|
|
|
| |
the reasons are the same as for sbrk. unlike sbrk, there is no safe
usage because brk does not return any useful information, so it should
just fail unconditionally.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
use of sbrk is never safe; it conflicts with malloc, and malloc may be
used internally by the implementation basically anywhere. prior to
this change, applications attempting to use sbrk to do their own heap
management simply caused untrackable memory corruption; now, they will
fail with ENOMEM allowing the errors to be fixed.
sbrk(0) is still permitted as a way to get the current brk; some
misguided applications use this as a measurement of their memory
usage or for other related purposes, and such usage is harmless.
eventually sbrk may be re-added if/when malloc is changed to avoid
using the brk by using mmap for all allocations.
|
| |
|
|
|
|
| |
based on patch by Timo Teräs.
|
| |
|
| |
|
|
|
|
|
|
| |
also include fallback code for broken kernels that don't support the
flags. as usual, the fallback has a race condition that can leak file
descriptors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the issue at hand is that many syscalls require as an argument the
kernel-ABI size of sigset_t, intended to allow the kernel to switch to
a larger sigset_t in the future. previously, each arch was defining
this size in syscall_arch.h, which was redundant with the definition
of _NSIG in bits/signal.h. as it's used in some not-quite-portable
application code as well, _NSIG is much more likely to be recognized
and understood immediately by someone reading the code, and it's also
shorter and less cluttered.
note that _NSIG is actually 65/129, not 64/128, but the division takes
care of throwing away the off-by-one part.
|
|
|
|
|
|
|
| |
if there's evidence of any use for it, we can add it back later. as
far as I can tell, glibc has it only for internal use (and musl uses a
direct syscall in that case rather than a function call), not for
exposing it to applications.
|
| |
|
|
|
|
|
|
|
| |
based on proposal by Isaac Dunham. nonexistance of bits/io.h will
cause inclusion of sys/io.h to produce an error on archs that are not
supposed to have it. this is probably the desired behavior, but the
error message may be a bit unusual.
|
| |
|
|
|
|
|
| |
these interfaces have been adopted by the Austin Group for inclusion
in the next version of POSIX.
|
| |
|
|
|
|
| |
issue reported/requested by Justin Cormack
|
|
|
|
| |
patch by Justin Cormack, with slight modification
|
| |
|