about summary refs log tree commit diff
path: root/src/ldso
Commit message (Collapse)AuthorAgeFilesLines
* move tlsdesc and internal dl function declarations to dynlink.hRich Felker2018-09-127-16/+7
|
* define and use internal macros for hidden visibility, weak refsRich Felker2018-09-057-20/+12
| | | | | | | | | this cleans up what had become widespread direct inline use of "GNU C" style attributes directly in the source, and lowers the barrier to increased use of hidden visibility, which will be useful to recovering some of the efficiency lost when the protected visibility hack was dropped in commit dc2f368e565c37728b0d620380b849c3a1ddd78f, especially on archs where the PLT ABI is costly.
* add m68k portRich Felker2018-06-191-0/+12
| | | | | | | | | | | | | three ABIs are supported: the default with 68881 80-bit fpu format and results returned in floating point registers, softfloat-only with the same format, and coldfire fpu with IEEE single/double only. only the first is tested at all, and only under qemu which has fpu emulation bugs. basic functionality smoke tests have been performed for the most common arch-specific breakage via libc-test and qemu user-level emulation. some sysvipc failures remain, but are shared with other big endian archs and will be fixed separately.
* fix TLS layout of TLS variant I when there is a gap above TPSzabolcs Nagy2018-06-021-3/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | In TLS variant I the TLS is above TP (or above a fixed offset from TP) but on some targets there is a reserved gap above TP before TLS starts. This matters for the local-exec tls access model when the offsets of TLS variables from the TP are hard coded by the linker into the executable, so the libc must compute these offsets the same way as the linker. The tls offset of the main module has to be alignup(GAP_ABOVE_TP, main_tls_align). If there is no TLS in the main module then the gap can be ignored since musl does not use it and the tls access models of shared libraries are not affected. The previous setup only worked if (tls_align & -GAP_ABOVE_TP) == 0 (i.e. TLS did not require large alignment) because the gap was treated as a fixed offset from TP. Now the TP points at the end of the pthread struct (which is aligned) and there is a gap above it (which may also need alignment). The fix required changing TP_ADJ and __pthread_self on affected targets (aarch64, arm and sh) and in the tlsdesc asm the offset to access the dtv changed too.
* fix dl_iterate_phdr in static PIE binariesRich Felker2017-04-111-0/+5
| | | | | | | | | analogous to commit 5bf7eba213cacc4c1220627c91c28deff2ffecda, use of AT_PHDR/PT_PHDR does not actually work to find the program base, and the method with _DYNAMIC vs PT_DYNAMIC must be used as an alternative. patch by Shiz, along with testing to confirm that this fixes unwinding in static PIE.
* in static dl_iterate_phdr, fix use of possibly-uninitialized aux dataRich Felker2017-03-141-1/+1
| | | | | this could only happen if an incomplete auxv was passed into the program, but it's better to just initialize the data anyway.
* s390x: implement dlsymBobby Bingham2017-02-151-0/+6
| | | | This was missed when writing the port initially.
* add powerpc64 portBobby Bingham2016-05-081-0/+12
|
* add mips n32 port (ILP32 ABI for mips64)Rich Felker2016-04-181-0/+17
| | | | based on patch submitted by Jaydeep Patil, with minor changes.
* add mips64 portRich Felker2016-03-061-0/+17
| | | | | patch by Mahesh Bodapati and Jaydeep Patil of Imagination Technologies.
* move dynamic linker to its own top-level directory, ldsoRich Felker2016-01-253-2087/+0
| | | | | | | | | | | | | | | | this eliminates the last need for the SHARED macro to control how files in the src tree are compiled. the same code is used for both libc.a and libc.so, with additional code for the dynamic linker (from the new ldso tree) being added to libc.so but not libc.a. separate .o and .lo object files still exist for the src tree, but the only difference is that the .lo files are built as PIC. in the future, if/when we add dlopen support for static-linked programs, much of the code in dynlink.c may be moved back into the src tree, but properly factored into separate source files. in that case, the code in the ldso tree will be reduced to just the dynamic linker entry point, self-relocation, and loading of libraries needed by the main application.
* adapt static dl_iterate_phdr not to depend on !defined(SHARED)Rich Felker2016-01-251-4/+3
| | | | | like elsewhere, use a weak alias that the dynamic linker will override with a more complete version capable of handling shared libraries.
* move static-linked stub dlsym out of dynlink.cRich Felker2016-01-252-11/+15
| | | | | | | | the function name is still __-prefixed because it requires an asm wrapper to pass the caller's address in order for RTLD_NEXT to work. since this was the last function in dynlink.c still used for static linking, now the whole file is conditional on SHARED being defined.
* move static-linked stub dlopen out of dynlink.cRich Felker2016-01-252-5/+13
|
* move dlinfo out of dynlink.cRich Felker2016-01-252-16/+12
|
* move dlclose out of dynlink.c to its own source fileRich Felker2016-01-252-5/+9
|
* move static-linked stub invalid dso handle checking out of dynlink.cRich Felker2016-01-252-9/+20
|
* move static/stub version of dladdr out of dynlink.cRich Felker2016-01-252-9/+6
|
* factor dlerror and error-setting code out of dynlink.cRich Felker2016-01-252-32/+55
| | | | | | | the ultimate goal of this change is to get all code used in libc.a out of dynlink.c, so that the dynamic linker code can be moved to its own tree and object files in the src tree can all be shared between libc.a and libc.so.
* add arch/abi info to dynamic linker's id/version outputRich Felker2016-01-221-1/+1
|
* move arm-specific translation units out of arch/arm/src, to src/*/armRich Felker2016-01-221-0/+42
| | | | | | | this is possible with the new build system that allows src/*/$(ARCH)/* files which do not shadow a file in the parent directory, and yields a more logical organization. eventually it will be possible to remove arch/*/src from the build system.
* ldso: fix the dtv update logic in __tls_get_newSzabolcs Nagy2015-11-281-1/+1
| | | | | | | | | | | | if two or more threads accessed tls in a dso that was loaded after the threads were created, then __tls_get_new could do out-of-bound memory access (leading to segfault). accidentally byte count was used instead of element count when the new dtv pointer was computed. (dso->new_dtv is (void**).) it is rare that the same dso provides dtv for several threads, the crash was not observed in practice, but possible to trigger.
* remove undef weak refs to init/fini array symbols in libc.soRich Felker2015-11-191-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit ad1cd43a86645ba2d4f7c8747240452a349d6bc1 eliminated preprocessor-level omission of references to the init/fini array symbols from object files going into libc.so. the references are weak, and the intent was that the linker would resolve them to zero in libc.so, but instead it leaves undefined references that could be satisfied at runtime. normally these references would be harmless, since the code using them does not even get executed, but some older binutils versions produce a linking error: when linking a program against libc.so, ld first tries to use the hidden init/fini array symbols produced by the linker script to satisfy the references in libc.so, then produces an error because the definitions are hidden. ideally ld would have already provided definitions of these symbols when linking libc.so, but the linker script for -shared omits them. to avoid this situation, the dynamic linker now provides its own dummy definitions of the init/fini array symbols for libc.so. since they are hidden, everything binds at ld time and no references remain in the dynamic symbol table. with modern binutils and --gc-sections, both the dummy empty array objects and the code referencing them get dropped at link time, anyway. the _init and _fini symbols are also switched back to using weak definitions rather than weak references since the latter behave somewhat problematically in general, and the weak definition approach was known to work well.
* use private maps even for read-only segments of FDPIC librariesRich Felker2015-11-151-1/+1
| | | | | | | | | | the nommu kernel shares memory when it can anyway for private read-only maps, but semantically the map should be private. this can make a difference when debugging breakpoints are to be used, in which case the kernel may need to ensure that the mapping is not shared. the new behavior matches how the kernel FDPIC loader maps the main program and/or program interpreter (dynamic linker) binary.
* remove use of SHARED macro in dynamic linker version reportingRich Felker2015-11-121-0/+1
| | | | also fix visibility of the glue function used.
* unify static and dynamic linked implementations of thread-local storageRich Felker2015-11-121-86/+54
| | | | | | | | | | | | | | | | | this both allows removal of some of the main remaining uses of the SHARED macro and clears one obstacle to static-linked dlopen support, which may be added at some point in the future. specialized single-TLS-module versions of __copy_tls and __reset_tls are removed and replaced with code adapted from their dynamic-linked versions, capable of operating on a whole chain of TLS modules, and use of the dynamic linker's DSO chain (which contains large struct dso objects) by these functions is replaced with a new chain of struct tls_module objects containing only the information needed for implementing TLS. this may also yield some performance benefit initializing TLS for a new thread when a large number of modules without TLS have been loaded, since since there is no need to walk structures for modules without TLS.
* unify static and dynamic libc init/fini code pathsRich Felker2015-11-111-3/+1
| | | | | | use weak definitions that the dynamic linker can override instead of preprocessor conditionals on SHARED so that the same libc start and exit code can be used for both static and dynamic linking.
* fix dynamic loader library mapping for nommu systemsRich Felker2015-11-111-4/+15
| | | | | | | | | | | | | | | | | | | | | on linux/nommu, non-writable private mappings of files may actually use memory shared with other processes or the fs cache. the old nommu loader code (used when mmap with MAP_FIXED fails) simply wrote over top of the original file mapping, possibly clobbering this shared memory. no such breakage was observed in practice, but it should have been possible. the new code starts by mapping anonymous writable memory on archs that might support nommu, then maps load segments over top of it, falling back to read if MAP_FIXED fails. we use an anonymous map rather than a writable file map to avoid reading more data from disk than needed. since pages cannot be loaded lazily on fault, in case of large data/bss, mapping the full file may read a lot of data that will subsequently be thrown away when processing additional LOAD segments. as a result, we cannot skip the first LOAD segment when operating in this mode. these changes affect only non-FDPIC nommu support.
* explicitly assemble all arm asm sources as UALRich Felker2015-11-101-0/+1
| | | | | | | | these files are all accepted as legacy arm syntax when producing arm code, but legacy syntax cannot be used for producing thumb2 with access to the full ISA. even after switching to UAL, some asm source files contain instructions which are not valid in thumb mode, so these will need to be addressed separately.
* fix missing bss handling in FDPIC ELF loaderRich Felker2015-10-281-0/+13
| | | | | | | | when a library being loaded has bss (i.e. data segment with p_memsz>p_filesz), this region needs to be zeroed with a combination of memset and/or mmap. the regular ELF loader always did this but the FDPIC code path omitted it, leading to objects in bss having uninitialized/junk contents.
* fix dladdr treatment of function descriptors for fdpicRich Felker2015-10-151-9/+22
| | | | | | | | | | | | | | when determining which module an address belongs to, all function descriptor ranges must be checked first, in case the allocated memory falls inside another module's memory range. dladdr itself must also check addresses against function descriptors before doing a best-match search against the symbol table. even when doing the latter (e.g. for code addresses obtained from mcontext_t), also check whether the best-match was a function, and if so, replace the result with a function descriptor address. which is the nominal "base address" of the function and which the caller needs if it intends to subsequently call the matching function.
* fix visibility mismatch in dynamic linker stage 2 function definitionRich Felker2015-10-151-0/+1
| | | | | | | | | | | | | | | since commits 2907afb8dbd4c1d34825c3c9bd2b41564baca210 and 6fc30c2493fcfedec89e45088bea87766a1e3286, __dls2 is no longer called via symbol lookup, but instead uses relative addressing that needs to be resolved at link time. on some linker versions, and/or if -Bsymbolic-functions is not used, the linker may leave behind a dynamic relocation, which is not suitable for bootstrapping the dynamic linker, if the reference to __dls2 is marked hidden but the definition is not actually hidden. correcting the definition to use hidden visibility fixes the problem. the static-PIE entry point rcrt1 was likewise affected and is also fixed by this patch.
* fix dlsym RTLD_NEXT behavior for fdpicRich Felker2015-09-221-4/+28
| | | | | | | | | | | | | | lookup the dso an address falls in based on the loadmap and not just a base/length. fix the main app's fake loadmap used when loaded by a non-fdpic-aware loader so that it does not cover the whole memory space. function descriptor addresses are also matched for future use by dladdr, but reverse lookups of function descriptors via dladdr have not been implemented yet. some revisions may be needed in the future once reclaim_gaps supports fdpic, so that function descriptors allocated in reclaimed heap space do not get detected as belonging to the module whose gaps they were allocated in.
* fix dlsym lookup of function symbols on fdpicRich Felker2015-09-221-0/+6
| | | | | | | | | | | | | | previously these resolved to the code address rather than the address of the function descriptor. the conditions for accepting or rejecting symbols are quite inconsistent between the different points in the dynamic linker code where such decisions are made. this commit attempts to be at least as correct as anything already there, but does not improve consistency. it has been tested to correctly avoid symbols that are merely references to functions defined in other modules, at least in simple usage, but at some point all symbol lookup logic should be reviewed and refactored/unified.
* move calls to application init functions after crt1 entry pointRich Felker2015-09-221-1/+5
| | | | | | | | | | | | | | this change is needed to be compatible with fdpic, where some of the main application's relocations may be performed as part of the crt1 entry point. if we call init functions before passing control, these relocations will not yet have been performed, and the init code will potentially make use of invalid pointers. conceptually, no code provided by the application or third-party libraries should run before the application entry point. the difference is not observable to programs using the crt1 we provide, but it could come into play if custom entry point code is used, so it's better to be doing this right anyway.
* fix breakage in non-fdpic dynamic linker init/fini processingRich Felker2015-09-221-1/+1
| | | | | a mistaken #ifdef instead of #if caused conversion of code addresses to function descriptors to be performed even on non-fdpic.
* fix resolving interp string address on fdpic ldd commandRich Felker2015-09-221-2/+1
|
* add real fdpic loading of shared librariesRich Felker2015-09-221-9/+54
| | | | | | previously, the normal ELF library loading code was used even for fdpic, so only the kernel-loaded dynamic linker and main app could benefit from separate placement of segments and shared text.
* add general fdpic support in dynamic linker and arch support for shRich Felker2015-09-222-11/+188
| | | | | | | | | | | | | | | | | | at this point not all functionality is complete. the dynamic linker itself, and main app if it is also loaded by the kernel, take advantage of fdpic and do not need constant displacement between segments, but additional libraries loaded by the dynamic linker follow normal ELF semantics for mapping still. this fully works, but does not admit shared text on nommu. in terms of actual functional correctness, dlsym's results are presently incorrect for function symbols, RTLD_NEXT fails to identify the caller correctly, and dladdr fails almost entirely. with the dynamic linker entry point working, support for static pie is automatically included, but linking the main application as ET_DYN (pie) probably does not make sense for fdpic anyway. ET_EXEC is equally relocatable but more efficient at representing relocations.
* factor symbol counting out of dladdr as its own functionRich Felker2015-09-211-19/+20
| | | | | | | | | | | | | the fdpic code will need to count symbols, and it may be useful elsewhere in the future too. counting is trivial as long as sysv hash is present, but for gnu-hash-only libraries it's complex. the behavior of the count is changed slightly: we now include symbols that are not accessible by the gnu hash table in the count. this may make dladdr slightly slower. if this is a problem, dladdr can subtract out the part that should not be accessible. unlike in the old code, subtracting this out is easy even in the fast path where sysv hash is available too.
* simplify dlstart code by using integer type for base addressRich Felker2015-09-211-8/+7
|
* refactor some more dynamic linker load address computationsRich Felker2015-09-171-7/+7
| | | | these were just missed in the previous commits.
* remove some useless casts in dynamic linkerRich Felker2015-09-171-2/+2
|
* further refactoring of dynamic linker load address computationsRich Felker2015-09-171-2/+2
| | | | | | | these are in do_relocs. the first one was omitted in commit 301335a80b85f12c018e4acf1a2c28615e119f8d because it slightly changes code (using dso->base rather than cached local var base) and would have prevented easy verification. the other was an oversight.
* begin refactoring load address computations in dynamic linkerRich Felker2015-09-171-19/+22
| | | | | | | | | | | | | for ordinary ELF with fixed segment displacements, load address computation is simply adding the base load address. but for FDPIC, each segment has its own load address, and virtual addresses need to be adjusted according to the segment they fall in. abstracting this computation is the first step to making the dynamic linker ready for FDPIC. for this first commit, a macro is used rather than a function in order to facilitate correctness checking. I have verified that the generated code does not change on my i386 build.
* remove old dlstart stage-2 symbolic lookup code; add new genericRich Felker2015-09-171-14/+8
| | | | | | | | | | | | | | this new generic version of the stage-2 function lookup should work for any arch where static data is accessible via got-relative or pc-relative addressing, using approximately the technique described in the log message for commit 2907afb8dbd4c1d34825c3c9bd2b41564baca210. since all the mips-like archs that need got slots fo access static data have already transitioned to the new stage chaining scheme, the old dynamic symbol lookup code is now removed. aarch64, arm, and sh have not yet transitioned; with this commit, they are now using the new generic code.
* introduce new symbol-lookup-free rcrt1/dlstart stage chainingRich Felker2015-09-171-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | previously, the call into stage 2 was made by looking up the symbol name "__dls2" (which was chosen short to be easy to look up) from the dynamic symbol table. this was no problem for the dynamic linker, since it always exports all its symbols. in the case of the static pie entry point, however, the dynamic symbol table does not contain the necessary symbol unless -rdynamic/-E was used when linking. this linking requirement is a major obstacle both to practical use of static-pie as a nommu binary format (since it greatly enlarges the file) and to upstream toolchain support for static-pie (adding -E to default linking specs is not reasonable). this patch replaces the runtime symbolic lookup with a link-time lookup via an inline asm fragment, which reloc.h is responsible for providing. in this initial commit, the asm is provided only for i386, and the old lookup code is left in place as a fallback for archs that have not yet transitioned. modifying crt_arch.h to pass the stage-2 function pointer as an argument was considered as an alternative, but such an approach would not be compatible with fdpic, where it's impossible to compute function pointers without already having performed relocations. it was also deemed desirable to keep crt_arch.h as simple/minimal as possible. in principle, archs with pc-relative or got-relative addressing of static variables could instead load the stage-2 function pointer from a static volatile object. that does not work for fdpic, and is not safe against reordering on mips-like archs that use got slots even for static functions, but it's a valid on i386 and many others, and could provide a reasonable default implementation in the future.
* dynlink.c: pass gnu-hash table pointer to gnu_lookupAlexander Monakov2015-06-281-13/+11
| | | | | | | | | | The callers need to check the value of the pointer anyway, so make them pass the pointer to gnu_lookup instead of reloading it there. Reorder gnu_lookup arguments so that always-used ones are listed first. GCC can choose a calling convention with arguments in registers (e.g. up to 3 arguments in eax, ecx, edx on x86), but cannot reorder the arguments for static functions.
* dynlink.c: slim down gnu_lookupAlexander Monakov2015-06-281-9/+5
| | | | | Do not reference dso->syms and dso->strings until point of use. Check 'h1 == (h2|1)', the simplest condition, before the others.
* dynlink.c: use bloom filter in gnu hash lookupAlexander Monakov2015-06-281-3/+22
| | | | | | | | Introduce gnu_lookup_filtered and use it to speed up symbol lookups in find_sym (do_dlsym is left as is, based on an expectation that frequently dlsym queries will use a dlopen handle rather than RTLD_NEXT or RTLD_DEFAULT, and will not need to look at more than one DSO).