| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| ... | |
| | |
|
| |
|
|
|
| |
commit a603a75a72bb469c6be4963ed1b55fabe675fe15 did this for the
public pthread_self function but not the internal inline one.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the restorer function pointer provided in the kernel sigaction
structure is interpreted by the kernel as a raw code address, not a
function descriptor.
this commit moves the declarations of the __restore and __restore_rt
symbols to ksigaction.h so that arch versions of the file can override
them, and introduces a version for sh which declares them as objects
rather than functions.
an alternate solution would have been defining SA_RESTORER to 0 so
that the functions are not used, but this both requires executable
stack (since the sh kernel does not have a vdso page with permanent
restorer functions) and crashes on qemu user-level emulation.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the entry point code supports being loaded by a loader which is not
fdpic-aware (in practice, either kernel with mmu or qemu without fdpic
support). this mostly just works, but signal handling will wrongly use
a function descriptor address as a code address if the personality is
not adjusted to fdpic.
ideally this code could be placed with sigaction so that it's not
needed except if/when a signal handler is installed. however,
personality is incorrectly maintained per-thread by the kernel, rather
than per-process, so it's necessary to correct the personality before
any threads are started. also, in order to skip the personality
syscall when an fdpic-aware loader is used, we need to be able to
detect how the program was loaded, and this information is only
readily available at the entry point.
|
| |
|
|
|
|
| |
previously, the normal ELF library loading code was used even for
fdpic, so only the kernel-loaded dynamic linker and main app could
benefit from separate placement of segments and shared text.
|
| |
|
|
|
|
| |
the __fdpic_fixup code is not needed for ET_DYN executables, which
instead use reloctions, so we can omit it from the dynamic linker and
static-pie entry point and save some code size.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
the C implementation of __unmapself used for potentially-nommu sh
assumed CRTJMP takes a function descriptor rather than a code address;
however, the actual dynamic linker needs a code address, and so commit
7a9669e977e5f750cf72ccbd2614f8b72ce02c4c changed the definition of the
macro in reloc.h. this commit puts the old macro back in a place where
it only affects __unmapself.
this is an ugly workaround and should be cleaned up at some point, but
at least it's well isolated.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
at this point not all functionality is complete. the dynamic linker
itself, and main app if it is also loaded by the kernel, take
advantage of fdpic and do not need constant displacement between
segments, but additional libraries loaded by the dynamic linker follow
normal ELF semantics for mapping still. this fully works, but does not
admit shared text on nommu.
in terms of actual functional correctness, dlsym's results are
presently incorrect for function symbols, RTLD_NEXT fails to identify
the caller correctly, and dladdr fails almost entirely.
with the dynamic linker entry point working, support for static pie is
automatically included, but linking the main application as ET_DYN
(pie) probably does not make sense for fdpic anyway. ET_EXEC is
equally relocatable but more efficient at representing relocations.
|
| | |
|
| | |
|
| | |
|
| | |
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
previously, the call into stage 2 was made by looking up the symbol
name "__dls2" (which was chosen short to be easy to look up) from the
dynamic symbol table. this was no problem for the dynamic linker,
since it always exports all its symbols. in the case of the static pie
entry point, however, the dynamic symbol table does not contain the
necessary symbol unless -rdynamic/-E was used when linking. this
linking requirement is a major obstacle both to practical use of
static-pie as a nommu binary format (since it greatly enlarges the
file) and to upstream toolchain support for static-pie (adding -E to
default linking specs is not reasonable).
this patch replaces the runtime symbolic lookup with a link-time
lookup via an inline asm fragment, which reloc.h is responsible for
providing. in this initial commit, the asm is provided only for i386,
and the old lookup code is left in place as a fallback for archs that
have not yet transitioned.
modifying crt_arch.h to pass the stage-2 function pointer as an
argument was considered as an alternative, but such an approach would
not be compatible with fdpic, where it's impossible to compute
function pointers without already having performed relocations. it was
also deemed desirable to keep crt_arch.h as simple/minimal as
possible.
in principle, archs with pc-relative or got-relative addressing of
static variables could instead load the stage-2 function pointer from
a static volatile object. that does not work for fdpic, and is not
safe against reordering on mips-like archs that use got slots even for
static functions, but it's a valid on i386 and many others, and could
provide a reasonable default implementation in the future.
|
| | |
|
| |
|
|
| |
in analogy with commit a627eb35864d5c29a3c3300dfe83745ab1e7a00f
|
| |
|
|
|
|
|
|
|
| |
with this commit it should be possible to produce a working
static-linked fdpic libc and application binaries for sh.
the changes in reloc.h are largely unused at this point since dynamic
linking is not supported, but the CRTJMP macro is used one place
outside of dynamic linking, in __unmapself.
|
| |
|
|
|
|
|
| |
this version of the entry point is only suitable for static linking in
ET_EXEC form. neither dynamic linking nor pie is supported yet. at
some point in the future the fdpic and non-fdpic versions of this code
may be unified but for now it's easiest to work with them separately.
|
| |
|
|
|
|
|
|
|
|
|
| |
clone calls back to a function pointer provided by the caller, which
will actually be a pointer to a function descriptor on fdpic. the
obvious solution is to have a separate version of clone for fdpic, but
I have taken a simpler approach to go around the problem. instead of
calling the pointed-to function from asm, a direct call is made to an
internal C function which then calls the pointed-to function. this
lets the C compiler generate the appropriate calling convention for an
indirect call with no need for ABI-specific assembly.
|
| |
|
|
|
|
|
|
|
| |
this error was only found by reading the code, but it seems to have
been causing gcc to produce wrong code in malloc: the same register
was used for the output and the high word of the input. in principle
this could have caused an infinite loop searching for an available
bin, but in practice most x86 models seem to implement the "undefined"
result of the bsf instruction as "unchanged".
|
| |
|
|
|
|
|
| |
these functions are part of the ARM EABI, meaning compilers may
generate references to them. known versions of gcc do not use them,
but llvm does. they are not provided by libgcc, and the de facto
standard seems to be that libc provides them.
|
| |
|
|
|
|
|
|
|
| |
commit 3c43c0761e1725fd5f89a9c028cbf43250abb913 fixed missing
synchronization in the atomic store operation for i386 and x86_64, but
opted to use mfence for the barrier on x86_64 where it's always
available. however, in practice mfence is significantly slower than
the barrier approach used on i386 (a nop-like lock orl operation).
this commit changes x86_64 (and x32) to use the faster barrier.
|
| |
|
|
|
|
|
|
|
| |
On 32bit systems long long arguments are passed in a special way
to some syscalls; this accidentally got copied to the AArch64 port.
The following interfaces were broken: fallocate, fanotify, ftruncate,
posix_fadvise, posix_fallocate, pread, pwrite, readahead,
sync_file_range, truncate.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
despite being strongly ordered, the x86 memory model does not preclude
reordering of loads across earlier stores. while a plain store
suffices as a release barrier, we actually need a full barrier, since
users of a_store subsequently load a waiter count to determine whether
to issue a futex wait, and using a stale count will result in soft
(fail-to-wake) deadlocks. these deadlocks were observed in malloc and
possible with stdio locks and other libc-internal locking.
on i386, an atomic operation on the caller's stack is used as the
barrier rather than performing the store itself using xchg; this
avoids the need to read the cache line on which the store is being
performed. mfence is used on x86_64 where it's always available, and
could be used on i386 with the appropriate cpu model checks if it's
shown to perform better.
|
| |
|
|
|
|
| |
....to be somewhat consistent and easily comparable with asm/socket.h
Signed-off-by: Roman Yeryomin <roman@ubnt.com>
|
| |
|
|
| |
Signed-off-by: Roman Yeryomin <roman@ubnt.com>
|
| |
|
|
|
|
| |
glibc and uclibc use gregs instead of regs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the TLS ABI spec for mips, powerpc, and some other (presently
unsupported) RISC archs has the return value of __tls_get_addr offset
by +0x8000 and the result of DTPOFF relocations offset by -0x8000. I
had previously assumed this part of the ABI was actually just an
implementation detail, since the adjustments cancel out. however, when
the local dynamic model is used for accessing TLS that's known to be
in the same DSO, either of the following may happen:
1. the -0x8000 offset may already be applied to the argument structure
passed to __tls_get_addr at ld time, without any opportunity for
runtime relocations.
2. __tls_get_addr may be used with a zero offset argument to obtain a
base address for the module's TLS, to which the caller then applies
immediate offsets for individual objects accessed using the local
dynamic model. since the immediate offsets have the -0x8000 adjustment
applied to them, the base address they use needs to include the
+0x8000 offset.
it would be possible, but more complex, to store the pointers in the
dtv[] array with the +0x8000 offset pre-applied, to avoid the runtime
cost of adding 0x8000 on each call to __tls_get_addr. this change
could be made later if measurements show that it would help.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
nominally the low bits of the trap number on sh are the number of
syscall arguments, but they have never been used by the kernel, and
some code making syscalls does not even know the number of arguments
and needs to pass an arbitrary high number anyway.
sh3/sh4 traditionally used the trap range 16-31 for syscalls, but part
of this range overlapped with hardware exceptions/interrupts on sh2
hardware, so an incompatible range 32-47 was chosen for sh2.
using trap number 31 everywhere, since it's in the existing sh3/sh4
range and does not conflict with sh2 hardware, is a proposed
unification of the kernel syscall convention that will allow binaries
to be shared between sh2 and sh3/sh4. if this is not accepted into the
kernel, we can refit the sh2 target with runtime selection mechanisms
for the trap number, but doing so would be invasive and would entail
non-trivial overhead.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
due to the way the interrupt and syscall trap mechanism works,
userspace on sh2 must never set the stack pointer to an invalid value.
thus, the approach used on most archs, where __unmapself executes with
no stack for the interval between SYS_munmap and SYS_exit, is not
viable on sh2.
in order not to pessimize sh3/sh4, the sh asm version of __unmapself
is not removed. instead it's renamed and redirected through code that
calls either the generic (safe) __unmapself or the sh3/sh4 asm,
depending on compile-time and run-time conditions.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
the sh2 target is being considered an ISA subset of sh3/sh4, in the
sense that binaries built for sh2 are intended to be usable on later
cpu models/kernels with mmu support. so rather than hard-coding
sh2-specific atomics, the runtime atomic selection mechanisms that was
already in place has been extended to add sh2 atomics.
at this time, the sh2 atomics are not SMP-compatible; since the ISA
lacks actual atomic operations, the new code instead masks interrupts
for the duration of the atomic operation, producing an atomic result
on single-core. this is only possible because the kernel/hardware does
not impose protections against userspace doing so. additional changes
will be needed to support future SMP systems.
care has been taken to avoid producing significant additional code
size in the case where it's known at compile-time that the target is
not sh2 and does not need sh2-specific code.
|
| |
|
|
|
| |
vdso will be available on arm in linux v4.2, the user-space code
for it is in kernel commit 8512287a8165592466cb9cb347ba94892e9c56a5
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
the instruction used to align the stack, "and $sp, $sp, -8", does not
actually exist; it's expanded to 2 instructions using the 'at'
(assembler temporary) register, and thus cannot be used in a branch
delay slot. since alignment mod 16 commutes with subtracting 8, simply
swapping these two operations fixes the problem.
crt1.o was not affected because it's still being generated from a
dedicated asm source file. dlstart.lo was not affected because the
stack pointer it receives is already aligned by the kernel. but
Scrt1.o was affected in cases where the dynamic linker gave it a
misaligned stack pointer.
|
| |
|
|
|
|
|
|
| |
i386 and x86_64 versions already had the .text directive; other archs
did not. normally, top-level (file scope) __asm__ starts in the .text
section anyway, but problems were reported with some versions of
clang, and it seems preferable to set it explicitly anyway, at least
for the sake of consistency between archs.
|
| |
|
|
|
|
| |
conceptually, and on other archs, these functions take a pointer to
int, but in the i386, x86_64, and x32 versions of atomic.h, they took
a pointer to void instead.
|
| |
|
|
|
|
|
| |
If we're building for sh4a, the compiler is already free to use
instructions only available on sh4a, so we can do the same and inline the
llsc atomics. If we're building for an older processor, we still do the
same runtime atomics selection as before.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
compilers targeting armv7 may be configured to produce thumb2 code
instead of arm code by default, and in the future we may wish to
support targets where only the thumb instruction set is available.
the instructions this patch omits in thumb mode are needed only for
non-thumb versions of armv4 or earlier, which are not supported by any
current compilers/toolchains and thus rather pointless to have. at
some point these compatibility return sequences may be removed from
all asm source files, and in that case it would make sense to remove
them here too and remove the ifdef.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
compilers targeting armv7 may be configured to produce thumb2 code
instead of arm code by default, and in the future we may wish to
support targets where only the thumb instruction set is available.
the changes made here avoid operating directly on the sp register,
which is not possible in thumb code, and address an issue with the way
the address of _DYNAMIC is computed.
previously, the relative address of _DYNAMIC was stored with an
additional offset of -8 versus the pc-relative add instruction, since
on arm the pc register evaluates to ".+8". in thumb code, it instead
evaluates to ".+4". both are two (normal-size) instructions beyond "."
in the current execution mode, so the numbered label 2 used in the
relative address expression is simply moved two instructions ahead to
be compatible with both instruction sets.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
i386, x86_64, x32, and powerpc all use TLS for stack protector canary
values in the default stack protector ABI, but the location only
matched the ABI on i386 and x86_64. on x32, the expected location for
the canary contained the tid, thus producing spurious mismatches
(resulting in process termination) upon fork. on powerpc, the expected
location contained the stdio_locks list head, so returning from a
function after calling flockfile produced spurious mismatches. in both
cases, the random canary was not present, and a predictable value was
used instead, making the stack protector hardening much less effective
than it should be.
in the current fix, the thread structure has been expanded to have
canary fields at all three possible locations, and archs that use a
non-default location must define a macro in pthread_arch.h to choose
which location is used. for most archs (which lack TLS canary ABI) the
choice does not matter.
|
| | |
|
| |
|
|
|
|
|
| |
the lifetime of compound literals is the block in which they appear.
the temporary struct __timespec_kernel objects created as compound
literals no longer existed at the time their addresses were passed to
the kernel.
|
| |
|
|
|
| |
remove __syscall declaration where it is not needed (aarch64, arm,
microblaze, or1k) and add the hidden attribute where it is (mips).
|
| |
|
|
|
| |
commit f3ddd173806fd5c60b3f034528ca24542aecc5b9 broke the build by
using "bx" instead of "br".
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
while the sh port is still experimental and subject to ABI
instability, this is not actually an application/libc boundary ABI
change. it only affects third-party APIs where jmp_buf is used in a
shared structure at the ABI boundary, because nothing anywhere near
the end of the jmp_buf object (which includes the oversized sigset_t)
is accessed by libc.
both glibc and uclibc have 15-slot jmp_buf for sh. presumably the
smaller version was used in musl because the slots for fpu status
register and thread pointer register (gbr) were incorrect and must not
be restored by longjmp, but the size should have been preserved, as
it's generally treated as a libc-agnostic ABI property for the arch,
and having extra slots free in case we ever need them for something is
useful anyway.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
previously it was using the same name as the default ABI with hard
float (floating point args and return value in registers).
the test __SH_FPU_ANY__ || __SH4__ matches what's used in the
configure script already, and seems correct under casual review
against gcc's config/sh.h, but may need tweaks. the logic for
predefined macros for sh, and what they all mean, is very complex.
eventually this should be documented in comments here.
configure already rejects "half-hard" configurations on sh where
double=float since these do not conform to Annex F and are not
suitable for musl, so these do not need to be considered here.
|
| |
|
|
|
| |
versions of reloc.h that rely on endian macros much include endian.h
to ensure they are available.
|
| |
|
|
|
|
| |
the jmp instruction requires a 64-bit register, so cast the desired PC
address up to uint64_t, going through uintptr_t to ensure that it's
zero-extended rather than possibly sign-extended.
|
| |
|
|
|
| |
syscall number was reserved in linux v4.0, kernel commit
add4b1b02da7e7ec35c34dd04d351ac53f3f0dd8
|
| | |
|
| |
|
|
|
|
|
|
|
|
| |
in a few places, non-hidden symbols were referenced from asm in ways
that assumed ld-time binding. while these is no semantic reason these
symbols need to be hidden, fixing the references without making them
hidden was going to be ugly, and hidden reduces some bloat anyway.
in the asm files, .global/.hidden directives have been moved to the
top to unclutter the actual code.
|
