about summary refs log tree commit diff
path: root/arch/mips
Commit message (Collapse)AuthorAgeFilesLines
* apply hidden visibility to sigreturn code fragmentsRich Felker2018-09-121-1/+3
| | | | | | | these were overlooked in the declarations overhaul work because they are not properly declared, and the current framework even allows their declared types to vary by arch. at some point this should be cleaned up, but I'm not sure what the right way would be.
* define and use internal macros for hidden visibility, weak refsRich Felker2018-09-051-2/+1
| | | | | | | | | this cleans up what had become widespread direct inline use of "GNU C" style attributes directly in the source, and lowers the barrier to increased use of hidden visibility, which will be useful to recovering some of the efficiency lost when the protected visibility hack was dropped in commit dc2f368e565c37728b0d620380b849c3a1ddd78f, especially on archs where the PLT ABI is costly.
* add support for arch-specific ptrace command macrosSzabolcs Nagy2018-07-171-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | sys/ptrace.h is target specific, use bits/ptrace.h to add target specific macro definitions. these macros are kept in the generic sys/ptrace.h even though some targets don't support them: PTRACE_GETREGS PTRACE_SETREGS PTRACE_GETFPREGS PTRACE_SETFPREGS PTRACE_GETFPXREGS PTRACE_SETFPXREGS so no macro definition got removed in this patch on any target. only s390x has a numerically conflicting macro definition (PTRACE_SINGLEBLOCK). the PT_ aliases follow glibc headers, otherwise the definitions come from linux uapi headers except ones that are skipped in glibc and there is no real kernel support (s390x PTRACE_*_AREA) or need special type definitions (mips PTRACE_*_WATCH_*) or only relevant for linux 2.4 compatibility (PTRACE_OLDSETOPTIONS).
* fix value of SO_PEERSEC on mips archsRich Felker2018-06-261-0/+1
| | | | adapted from patch by Matthias Schiffer.
* mips: add HWCAP_ flags from linux v4.17Szabolcs Nagy2018-06-191-0/+1
| | | | new in linux commit 256211f2b0b251e532d1899b115e374feb16fa7a
* fix TLS layout of TLS variant I when there is a gap above TPSzabolcs Nagy2018-06-021-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | In TLS variant I the TLS is above TP (or above a fixed offset from TP) but on some targets there is a reserved gap above TP before TLS starts. This matters for the local-exec tls access model when the offsets of TLS variables from the TP are hard coded by the linker into the executable, so the libc must compute these offsets the same way as the linker. The tls offset of the main module has to be alignup(GAP_ABOVE_TP, main_tls_align). If there is no TLS in the main module then the gap can be ignored since musl does not use it and the tls access models of shared libraries are not affected. The previous setup only worked if (tls_align & -GAP_ABOVE_TP) == 0 (i.e. TLS did not require large alignment) because the gap was treated as a fixed offset from TP. Now the TP points at the end of the pthread struct (which is aligned) and there is a gap above it (which may also need alignment). The fix required changing TP_ADJ and __pthread_self on affected targets (aarch64, arm and sh) and in the tlsdesc asm the offset to access the dtv changed too.
* fix minor namespace issues in termios.hRich Felker2018-03-101-0/+2
| | | | | | | | | | the output delay features (NL*, CR*, TAB*, BS*, and VT*) are XSI-shaded. VT* is in the V* namespace reservation but the rest need to be suppressed in base POSIX namespace. unfortunately this change introduces feature test macro checks into another bits header. at some point these checks should be simplified by having features.h handle the "FTM X implies Y" relationships.
* add MAP_SYNC and MAP_SHARED_VALIDATE from linux v4.15Szabolcs Nagy2018-02-221-0/+1
| | | | | | | | for synchronous page faults, new in linux commit 1c9725974074a047f6080eecc62c50a8e840d050 and b6fb293f2497a9841d94f6b57bd2bb2cd222da43 note that only targets that use asm-generic/mman.h have this new flag defined, so undef it on other targets (mips*, powerpc*).
* mips,powerpc: fix TIOCSER_TEMT in termios.hSzabolcs Nagy2018-02-221-1/+1
| | | | | | use the same token to define TIOCSER_TEMT as is used in ioctl.h so when both headers are included there are no redefinition warnings during musl build.
* ioctl TIOCGPTPEER from linux v4.13Szabolcs Nagy2017-11-051-0/+1
| | | | | added for safe opening of peer end of pty in a mount namespace. new in linux commit c6325179238f1d4683edbec53d8322575d76d7e2
* add statx syscall numbers from linux v4.11Szabolcs Nagy2017-11-051-0/+1
| | | | | statx was added in linux commit a528d35e8bfcc521d7cb70aaf03e1bd296c8493f (there is no libc wrapper yet and microblaze and sh misses the number).
* make syscall.h consistent with linuxSzabolcs Nagy2017-09-062-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | most of the found naming differences don't matter to musl, because internally it unifies the syscall names that vary across targets, but for external code the names should match the kernel uapi. aarch64: __NR_fstatat is called __NR_newfstatat in linux. __NR_or1k_atomic got mistakenly copied from or1k. arm: __NR_arm_sync_file_range is an alias for __NR_sync_file_range2 __NR_fadvise64_64 is called __NR_arm_fadvise64_64 in linux, the old non-arm name is kept too, it should not cause issues. (powerpc has similar nonstandard fadvise and it uses the normal name.) i386: __NR_madvise1 was removed from linux in commit 303395ac3bf3e2cb488435537d416bc840438fcb 2011-11-11 microblaze: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite had different name in linux. mips: __NR_fadvise, __NR_fstatat, __NR_pread, __NR_pwrite, __NR_select had different name in linux. mipsn32: __NR_fstatat is called __NR_newfstatat in linux. or1k: __NR__llseek is called __NR_llseek in linux. the old name is kept too because that's the name musl uses internally. powerpc: __NR_{get,set}res{gid,uid}32 was never present in powerpc linux. __NR_timerfd was briefly defined in linux but then got renamed.
* add SIOCGSTAMPNS socket ioctl macro to ioctl.hSzabolcs Nagy2017-08-291-0/+1
| | | | | | | | | | it is defined in linux asm/sockios.h since commit ae40eb1ef30ab4120bd3c8b7e3da99ee53d27a23 (linux v2.6.22) but was missing from musl by accident. in musl the sockios macros are exposed in sys/ioctl.h together with other ioctl requests instead of in sys/socket.h because of namespace rules. (glibc has them in sys/socket.h under _GNU_SOURCE.)
* fix mips ioctl macros to match linux asm/sockios.hSzabolcs Nagy2017-08-291-5/+5
|
* remove long-obsolete clang workarounds from mips* syscall_arch.h filesRich Felker2017-05-311-41/+0
| | | | | | | at one point, clang reportedly failed to support the asm register constraints needed for inline syscalls. versions of clang that old have much bigger problems that preclude using them to compile musl libc.
* add pkey_{mprotect,alloc,free} syscalls from linux v4.9Szabolcs Nagy2016-12-291-0/+3
| | | | | see linux commit e8c24d3a23a469f1f40d4de24d872ca7023ced0a and linux Documentation/x86/protection-keys.txt
* add bits/hwcap.h and include it in sys/auxv.hSzabolcs Nagy2016-10-201-0/+2
| | | | | | | | | aarch64, arm, mips, mips64, mipsn32, powerpc, powerpc64 and sh have cpu feature bits defined in linux for AT_HWCAP auxv entry, so expose those in sys/auxv.h it seems the mips hwcaps were never exposed to userspace neither by linux nor by glibc, but that's most likely an oversight.
* fix regression in tcsetattr on all mips archsRich Felker2016-07-131-3/+3
| | | | | revert commit 8c316e9e49d37ad92c2e7493e16166a2afca419f. it was wrong and does not match how the kernel API works.
* make brace placement in public header typedef'd structs consistentRich Felker2016-07-031-2/+1
| | | | | | commit befa5866ee30d09c0c96e88af2eabff5911342ea performed this change for struct definitions that did not also involve typedef, but omitted the latter.
* make brace placement in public header struct definitions consistentRich Felker2016-07-035-12/+6
| | | | | | | | | | | | | | placing the opening brace on the same line as the struct keyword/tag is the style I prefer and seems to be the prevailing practice in more recent additions. these changes were generated by the command: find include/ arch/*/bits -name '*.h' \ -exec sed -i '/^struct [^;{]*$/{N;s/\n/ /;}' {} + and subsequently checked by hand to ensure that the regex did not pick up any false positives.
* format mips bits/termios.h consistently mips64 and n32 versionsRich Felker2016-07-031-2/+1
| | | | with this change, all three files are identical.
* fix TCS* definitions in mips termios.hSzabolcs Nagy2016-07-031-3/+3
| | | | these were incorrectly using the generic definitions.
* fix mips termios.h macro exposure/namespace issuesSzabolcs Nagy2016-07-031-15/+14
| | | | same changes to the defined macros as in powerpc and generic bits.
* fix TIOCMSET in mips ioctl.hSzabolcs Nagy2016-07-031-1/+1
| | | | it seems it was a typo.
* fix mips, mips64, mipsn32 TIOCM_* macros in ioctl.hSzabolcs Nagy2016-07-031-14/+14
| | | | | TIOCM_ macros were wrongly using the asm-generic/termios.h definitions instead of the mips specific ones from asm/termios.h
* remove mips and powerpc ioctls that are missing from linux uapiSzabolcs Nagy2016-07-031-5/+0
| | | | | | mips and powerpc use their own asm/ioctls.h, not the asm-generic/ioctls.h and they lack termiox macros that are available on other targets. see kernel commit 1d65b4a088de407e99714fdc27862449db04fb5c
* add missing TIOC* macros to ioctl.hSzabolcs Nagy2016-07-031-0/+8
| | | | | these are defined in linux asm/ioctls.h. (powerpc64 and powerpc bits/ioctl.h are now identical)
* add missing SIOCSIFNAME from linux/sockios.h to ioctl.hSzabolcs Nagy2016-07-031-0/+1
| | | | glibc ioctl.h has it too.
* remove ioctl macros that were removed from linux uapiSzabolcs Nagy2016-07-031-4/+0
| | | | | TIOCTTYGSTRUCT, TIOCGHAYESESP, TIOCSHAYESESP and TIOCM_MODEM_BITS were removed from the linux uapi and not present in glibc ioctl.h
* add preadv2 and pwritev2 syscall numbers for linux v4.6Szabolcs Nagy2016-06-091-0/+2
| | | | | | | | the syscalls take an additional flag argument, they were added in commit f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09. the syscall is not allocated for microblaze and sh yet.
* deduplicate __NR_* and SYS_* syscall number definitionsBobby Bingham2016-05-121-362/+0
|
* add support for mips and mips64 r6 isaRich Felker2016-04-033-10/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | mips32r6 and mips64r6 are actually new isas at both the asm source and opcode levels (pre-r6 code cannot run on r6) and thus need to be treated as a new subarch. the following changes are made, some of which yield code generation improvements for non-r6 targets too: - add subarch logic in configure script and reloc.h files for dynamic linker name. - suppress use of .set mips2 asm directives (used to allow mips2 atomic instructions on baseline mips1 builds; the kernel has to emulate them on mips1) except when actually needed. they cause wrong instruction encodings on r6, and pessimize inlining on at least some compilers. - only hard-code sync instruction encoding on mips1. - use "ZC" constraint instead of "m" constraint for llsc memory operands on r6, where the ll/sc instructions no longer accept full 16-bit offsets. - only hard-code rdhwr instruction encoding with .word on targets (pre-r2) where it may need trap-and-emulate by the kernel. otherwise, just use the instruction mnemonic, and allow an arbitrary destination register to be used.
* add copy_file_range syscall numbers from linux v4.5Szabolcs Nagy2016-03-191-0/+2
| | | | | | | it was introduced for offloading copying between regular files in linux commit 29732938a6289a15e907da234d6692a2ead71855 (microblaze and sh does not yet have the syscall number.)
* deduplicate bits/mman.hSzabolcs Nagy2016-03-181-45/+11
| | | | | | | | | | | currently five targets use the same mman.h constants and the rest share most constants too, so move them to sys/mman.h before the bits/mman.h include where the differences can be corrected by redefinition of the macros. this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most targets (it should be the same as MADV_DONTNEED), and sh defined the x86-only MAP_32BIT mmap flag.
* remove workaround for broken mips assemblersRich Felker2016-02-081-4/+1
| | | | | | | | | | | | | | | | | | | | the workaround was for a bug that botched .gpword references to local labels, applying a nonsensical random offset of -0x4000 to them. this reverses commit 5e396fb996a80b035d0f6ecf7fed50f68aa3ebb7 and a removes a similar hack that was added to syscall_cp.s in the later commit 756c8af8589265e99e454fe3adcda1d0bc5e1963. it turns out one additional instance of the same idiom, the GETFUNCSYM macro in arch/mips/reloc.h, was still affected by the assembler bug and does not admit an easy workaround without making assumptions about how the macro is used. the previous workarounds made static linking work but left the early-stage dynamic linker broken and thus had limited usefulness. instead, affected users (using binutils versions older than 2.20) will need to fix the bug on the binutils side; the trivial patch is commit 453f5985b13e35161984bf1bf657bbab11515aa4 in the binutils-gdb repository.
* ldso: fix GDB dynamic linker info on MIPSFelix Fietkau2016-01-301-1/+1
| | | | | | | GDB is looking for a pointer to the ldso debug info in the data of the ..rld_map section. Signed-off-by: Felix Fietkau <nbd@openwrt.org>
* deduplicate the bulk of the arch bits headersRich Felker2016-01-273-18/+0
| | | | | | | | | | | | all bits headers that were identical for a number of 'clean' archs are moved to the new arch/generic tree. in addition, a few headers that differed only cosmetically from the new generic version are removed. additional deduplication may be possible in mman.h and in several headers (limits.h, posix.h, stdint.h) that mostly depend on whether the arch is 32- or 64-bit, but they are left alone for now because greater gains are likely possible with more invasive changes to header logic, which is beyond the scope of this commit.
* mips: add vdso supportHauke Mehrtens2016-01-271-0/+4
| | | | | | | | | | | | vdso support is available on mips starting with kernel 4.4, see kernel commit a7f4df4e21 "MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()" for details. In Linux kernel 4.4.0 the mips code returns -ENOSYS in case it can not handle the vdso call and assumes the libc will call the original syscall in this case. Handle this case in musl. Currently Linux kernel 4.4.0 handles the following types: CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_REALTIME and CLOCK_MONOTONIC.
* fix siginfo_t for mipsSzabolcs Nagy2016-01-261-0/+9
| | | | | | | | si_errno and si_code are swapped in mips siginfo_t compared to other archs and some si_code values are different. This fix is required for POSIX timers to work. based on patch by Dmitry Ivanov.
* add MCL_ONFAULT and MLOCK_ONFAULT mlockall and mlock2 flagsSzabolcs Nagy2016-01-261-0/+1
| | | | | | | | they lock faulted pages into memory (useful when a small part of a large mapped file needs efficient access), new in linux v4.4, commit b0f205c2a3082dd9081f9a94e50658c5fa906ff1 MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
* add mlock2 syscall number from linux v4.4Szabolcs Nagy2016-01-261-0/+2
| | | | | | | this is mlock with a flags argument, new in linux commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e as usual microblaze and sh don't have allocated syscall number yet.
* add new membarrier, userfaultfd and switch_endian syscallsSzabolcs Nagy2016-01-261-0/+4
| | | | | | | | | | | | | | | new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc, x32 and x86_64. membarrier is a system wide memory barrier, moves most of the synchronization cost to one side, new in kernel commit 5b25b13ab08f616efd566347d809b4ece54570d1 userfaultfd is useful for qemu and is new in kernel commit 8d2afd96c20316d112e04d935d9e09150e988397 switch_endian is powerpc only for switching endianness, new in commit 529d235a0e190ded1d21ccc80a73e625ebcad09b
* overhaul mips atomics for new atomics frameworkRich Felker2016-01-221-53/+31
|
* refactor internal atomic.hRich Felker2016-01-212-205/+61
| | | | | | | | | | | | | | | rather than having each arch provide its own atomic.h, there is a new shared atomic.h in src/internal which pulls arch-specific definitions from arc/$(ARCH)/atomic_arch.h. the latter can be extremely minimal, defining only a_cas or new ll/sc type primitives which the shared atomic.h will use to construct everything else. this commit avoids making heavy changes to the individual archs' atomic implementations. definitions which are identical or near-identical to what the new shared atomic.h would produce have been removed, but otherwise the changes made are just hooking up the arch-specific files to the new infrastructure. major changes to take advantage of the new system will come in subsequent commits.
* adjust mips crt_arch entry point asm to avoid assembler bugsRich Felker2015-12-291-1/+4
| | | | | | | | | | | | | apparently the .gpword directive does not work reliably with local text labels; values produced were offset by 64k from the correct value, resulting in incorrect computation of the got pointer at runtime. instead, use an external label so that the assembler does not munge the relocation; the linker will then get it right. commit 6fef8cafbd0f6f185897bc87feb1ff66e2e204e1 exposed this issue by removing the old, non-PIE-compatible handwritten crt1.s, which was not affected. presumably mips PIE executables (using Scrt1.o produced from crt_arch.h) were already affected at the time.
* remove visibility suppression by SHARED macro in mips and x32 arch filesRich Felker2015-12-151-2/+0
| | | | | | commit 8a8fdf6398b85c99dffb237e47fa577e2ddc9e77 was intended to remove all such usage, but these arch-specific files were overlooked, leading to inconsistent declarations and definitions.
* properly access mcontext_t program counter in cancellation handlerRich Felker2015-11-021-1/+1
| | | | | | | | | using the actual mcontext_t definition rather than an overlaid pointer array both improves correctness/readability and eliminates some ugly hacks for archs with 64-bit registers bit 32-bit program counter. also fix UB due to comparison of pointers not in a common array object.
* add comment documenting hard-coded opcode for reading mips thread pointerRich Felker2015-10-151-0/+1
|
* fix signal return for sh/fdpicRich Felker2015-09-231-0/+2
| | | | | | | | | | | | | | | | the restorer function pointer provided in the kernel sigaction structure is interpreted by the kernel as a raw code address, not a function descriptor. this commit moves the declarations of the __restore and __restore_rt symbols to ksigaction.h so that arch versions of the file can override them, and introduces a version for sh which declares them as objects rather than functions. an alternate solution would have been defining SA_RESTORER to 0 so that the functions are not used, but this both requires executable stack (since the sh kernel does not have a vdso page with permanent restorer functions) and crashes on qemu user-level emulation.
* new dlstart stage-2 chaining for mipsRich Felker2015-09-171-0/+15
|