about summary refs log tree commit diff
path: root/arch/mips
Commit message (Collapse)AuthorAgeFilesLines
* add missing TIOC* macros to ioctl.hSzabolcs Nagy2016-07-031-0/+8
| | | | | these are defined in linux asm/ioctls.h. (powerpc64 and powerpc bits/ioctl.h are now identical)
* add missing SIOCSIFNAME from linux/sockios.h to ioctl.hSzabolcs Nagy2016-07-031-0/+1
| | | | glibc ioctl.h has it too.
* remove ioctl macros that were removed from linux uapiSzabolcs Nagy2016-07-031-4/+0
| | | | | TIOCTTYGSTRUCT, TIOCGHAYESESP, TIOCSHAYESESP and TIOCM_MODEM_BITS were removed from the linux uapi and not present in glibc ioctl.h
* add preadv2 and pwritev2 syscall numbers for linux v4.6Szabolcs Nagy2016-06-091-0/+2
| | | | | | | | the syscalls take an additional flag argument, they were added in commit f17d8b35452cab31a70d224964cd583fb2845449 and a RWF_HIPRI priority hint flag was added to linux/fs.h in 97be7ebe53915af504fb491fb99f064c7cf3cb09. the syscall is not allocated for microblaze and sh yet.
* deduplicate __NR_* and SYS_* syscall number definitionsBobby Bingham2016-05-121-362/+0
|
* add support for mips and mips64 r6 isaRich Felker2016-04-033-10/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | mips32r6 and mips64r6 are actually new isas at both the asm source and opcode levels (pre-r6 code cannot run on r6) and thus need to be treated as a new subarch. the following changes are made, some of which yield code generation improvements for non-r6 targets too: - add subarch logic in configure script and reloc.h files for dynamic linker name. - suppress use of .set mips2 asm directives (used to allow mips2 atomic instructions on baseline mips1 builds; the kernel has to emulate them on mips1) except when actually needed. they cause wrong instruction encodings on r6, and pessimize inlining on at least some compilers. - only hard-code sync instruction encoding on mips1. - use "ZC" constraint instead of "m" constraint for llsc memory operands on r6, where the ll/sc instructions no longer accept full 16-bit offsets. - only hard-code rdhwr instruction encoding with .word on targets (pre-r2) where it may need trap-and-emulate by the kernel. otherwise, just use the instruction mnemonic, and allow an arbitrary destination register to be used.
* add copy_file_range syscall numbers from linux v4.5Szabolcs Nagy2016-03-191-0/+2
| | | | | | | it was introduced for offloading copying between regular files in linux commit 29732938a6289a15e907da234d6692a2ead71855 (microblaze and sh does not yet have the syscall number.)
* deduplicate bits/mman.hSzabolcs Nagy2016-03-181-45/+11
| | | | | | | | | | | currently five targets use the same mman.h constants and the rest share most constants too, so move them to sys/mman.h before the bits/mman.h include where the differences can be corrected by redefinition of the macros. this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most targets (it should be the same as MADV_DONTNEED), and sh defined the x86-only MAP_32BIT mmap flag.
* remove workaround for broken mips assemblersRich Felker2016-02-081-4/+1
| | | | | | | | | | | | | | | | | | | | the workaround was for a bug that botched .gpword references to local labels, applying a nonsensical random offset of -0x4000 to them. this reverses commit 5e396fb996a80b035d0f6ecf7fed50f68aa3ebb7 and a removes a similar hack that was added to syscall_cp.s in the later commit 756c8af8589265e99e454fe3adcda1d0bc5e1963. it turns out one additional instance of the same idiom, the GETFUNCSYM macro in arch/mips/reloc.h, was still affected by the assembler bug and does not admit an easy workaround without making assumptions about how the macro is used. the previous workarounds made static linking work but left the early-stage dynamic linker broken and thus had limited usefulness. instead, affected users (using binutils versions older than 2.20) will need to fix the bug on the binutils side; the trivial patch is commit 453f5985b13e35161984bf1bf657bbab11515aa4 in the binutils-gdb repository.
* ldso: fix GDB dynamic linker info on MIPSFelix Fietkau2016-01-301-1/+1
| | | | | | | GDB is looking for a pointer to the ldso debug info in the data of the ..rld_map section. Signed-off-by: Felix Fietkau <nbd@openwrt.org>
* deduplicate the bulk of the arch bits headersRich Felker2016-01-273-18/+0
| | | | | | | | | | | | all bits headers that were identical for a number of 'clean' archs are moved to the new arch/generic tree. in addition, a few headers that differed only cosmetically from the new generic version are removed. additional deduplication may be possible in mman.h and in several headers (limits.h, posix.h, stdint.h) that mostly depend on whether the arch is 32- or 64-bit, but they are left alone for now because greater gains are likely possible with more invasive changes to header logic, which is beyond the scope of this commit.
* mips: add vdso supportHauke Mehrtens2016-01-271-0/+4
| | | | | | | | | | | | vdso support is available on mips starting with kernel 4.4, see kernel commit a7f4df4e21 "MIPS: VDSO: Add implementations of gettimeofday() and clock_gettime()" for details. In Linux kernel 4.4.0 the mips code returns -ENOSYS in case it can not handle the vdso call and assumes the libc will call the original syscall in this case. Handle this case in musl. Currently Linux kernel 4.4.0 handles the following types: CLOCK_REALTIME_COARSE, CLOCK_MONOTONIC_COARSE, CLOCK_REALTIME and CLOCK_MONOTONIC.
* fix siginfo_t for mipsSzabolcs Nagy2016-01-261-0/+9
| | | | | | | | si_errno and si_code are swapped in mips siginfo_t compared to other archs and some si_code values are different. This fix is required for POSIX timers to work. based on patch by Dmitry Ivanov.
* add MCL_ONFAULT and MLOCK_ONFAULT mlockall and mlock2 flagsSzabolcs Nagy2016-01-261-0/+1
| | | | | | | | they lock faulted pages into memory (useful when a small part of a large mapped file needs efficient access), new in linux v4.4, commit b0f205c2a3082dd9081f9a94e50658c5fa906ff1 MLOCK_* is not in the POSIX reserved namespace for sys/mman.h
* add mlock2 syscall number from linux v4.4Szabolcs Nagy2016-01-261-0/+2
| | | | | | | this is mlock with a flags argument, new in linux commit a8ca5d0ecbdde5cc3d7accacbd69968b0c98764e as usual microblaze and sh don't have allocated syscall number yet.
* add new membarrier, userfaultfd and switch_endian syscallsSzabolcs Nagy2016-01-261-0/+4
| | | | | | | | | | | | | | | new in linux v4.3 added for aarch64, arm, i386, mips, or1k, powerpc, x32 and x86_64. membarrier is a system wide memory barrier, moves most of the synchronization cost to one side, new in kernel commit 5b25b13ab08f616efd566347d809b4ece54570d1 userfaultfd is useful for qemu and is new in kernel commit 8d2afd96c20316d112e04d935d9e09150e988397 switch_endian is powerpc only for switching endianness, new in commit 529d235a0e190ded1d21ccc80a73e625ebcad09b
* overhaul mips atomics for new atomics frameworkRich Felker2016-01-221-53/+31
|
* refactor internal atomic.hRich Felker2016-01-212-205/+61
| | | | | | | | | | | | | | | rather than having each arch provide its own atomic.h, there is a new shared atomic.h in src/internal which pulls arch-specific definitions from arc/$(ARCH)/atomic_arch.h. the latter can be extremely minimal, defining only a_cas or new ll/sc type primitives which the shared atomic.h will use to construct everything else. this commit avoids making heavy changes to the individual archs' atomic implementations. definitions which are identical or near-identical to what the new shared atomic.h would produce have been removed, but otherwise the changes made are just hooking up the arch-specific files to the new infrastructure. major changes to take advantage of the new system will come in subsequent commits.
* adjust mips crt_arch entry point asm to avoid assembler bugsRich Felker2015-12-291-1/+4
| | | | | | | | | | | | | apparently the .gpword directive does not work reliably with local text labels; values produced were offset by 64k from the correct value, resulting in incorrect computation of the got pointer at runtime. instead, use an external label so that the assembler does not munge the relocation; the linker will then get it right. commit 6fef8cafbd0f6f185897bc87feb1ff66e2e204e1 exposed this issue by removing the old, non-PIE-compatible handwritten crt1.s, which was not affected. presumably mips PIE executables (using Scrt1.o produced from crt_arch.h) were already affected at the time.
* remove visibility suppression by SHARED macro in mips and x32 arch filesRich Felker2015-12-151-2/+0
| | | | | | commit 8a8fdf6398b85c99dffb237e47fa577e2ddc9e77 was intended to remove all such usage, but these arch-specific files were overlooked, leading to inconsistent declarations and definitions.
* properly access mcontext_t program counter in cancellation handlerRich Felker2015-11-021-1/+1
| | | | | | | | | using the actual mcontext_t definition rather than an overlaid pointer array both improves correctness/readability and eliminates some ugly hacks for archs with 64-bit registers bit 32-bit program counter. also fix UB due to comparison of pointers not in a common array object.
* add comment documenting hard-coded opcode for reading mips thread pointerRich Felker2015-10-151-0/+1
|
* fix signal return for sh/fdpicRich Felker2015-09-231-0/+2
| | | | | | | | | | | | | | | | the restorer function pointer provided in the kernel sigaction structure is interpreted by the kernel as a raw code address, not a function descriptor. this commit moves the declarations of the __restore and __restore_rt symbols to ksigaction.h so that arch versions of the file can override them, and introduces a version for sh which declares them as objects rather than functions. an alternate solution would have been defining SA_RESTORER to 0 so that the functions are not used, but this both requires executable stack (since the sh kernel does not have a vdso page with permanent restorer functions) and crashes on qemu user-level emulation.
* new dlstart stage-2 chaining for mipsRich Felker2015-09-171-0/+15
|
* socket.h: cleanup/reorder mips and powerpc bits/socket.hRoman Yeryomin2015-07-211-16/+18
| | | | | | ....to be somewhat consistent and easily comparable with asm/socket.h Signed-off-by: Roman Yeryomin <roman@ubnt.com>
* socket.h: fix SO_* for mipsRoman Yeryomin2015-07-211-0/+3
| | | | Signed-off-by: Roman Yeryomin <roman@ubnt.com>
* mips: fix mcontext_t register array field nameFelix Fietkau2015-07-211-1/+1
| | | | | | glibc and uclibc use gregs instead of regs Signed-off-by: Felix Fietkau <nbd@openwrt.org>
* fix local-dynamic model TLS on mips and powerpcRich Felker2015-06-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | the TLS ABI spec for mips, powerpc, and some other (presently unsupported) RISC archs has the return value of __tls_get_addr offset by +0x8000 and the result of DTPOFF relocations offset by -0x8000. I had previously assumed this part of the ABI was actually just an implementation detail, since the adjustments cancel out. however, when the local dynamic model is used for accessing TLS that's known to be in the same DSO, either of the following may happen: 1. the -0x8000 offset may already be applied to the argument structure passed to __tls_get_addr at ld time, without any opportunity for runtime relocations. 2. __tls_get_addr may be used with a zero offset argument to obtain a base address for the module's TLS, to which the caller then applies immediate offsets for individual objects accessed using the local dynamic model. since the immediate offsets have the -0x8000 adjustment applied to them, the base address they use needs to include the +0x8000 offset. it would be possible, but more complex, to store the pointers in the dtv[] array with the +0x8000 offset pre-applied, to avoid the runtime cost of adding 0x8000 on each call to __tls_get_addr. this change could be made later if measurements show that it would help.
* fix stack alignment code in mips crt_arch.hRich Felker2015-05-241-2/+2
| | | | | | | | | | | | | | the instruction used to align the stack, "and $sp, $sp, -8", does not actually exist; it's expanded to 2 instructions using the 'at' (assembler temporary) register, and thus cannot be used in a branch delay slot. since alignment mod 16 commutes with subtracting 8, simply swapping these two operations fixes the problem. crt1.o was not affected because it's still being generated from a dedicated asm source file. dlstart.lo was not affected because the stack pointer it receives is already aligned by the kernel. but Scrt1.o was affected in cases where the dynamic linker gave it a misaligned stack pointer.
* add .text section directive to all crt_arch.h files missing itRich Felker2015-05-221-0/+1
| | | | | | | | i386 and x86_64 versions already had the .text directive; other archs did not. normally, top-level (file scope) __asm__ starts in the .text section anyway, but problems were reported with some versions of clang, and it seems preferable to set it explicitly anyway, at least for the sake of consistency between archs.
* fix __syscall declaration with wrong visibility in syscall_arch.hSzabolcs Nagy2015-04-301-0/+3
| | | | | remove __syscall declaration where it is not needed (aarch64, arm, microblaze, or1k) and add the hidden attribute where it is (mips).
* fix missing quotation mark in mips crt_arch.h that broke buildRich Felker2015-04-171-1/+1
|
* dynamic linker bootstrap overhaulRich Felker2015-04-132-89/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this overhaul further reduces the amount of arch-specific code needed by the dynamic linker and removes a number of assumptions, including: - that symbolic function references inside libc are bound at link time via the linker option -Bsymbolic-functions. - that libc functions used by the dynamic linker do not require access to data symbols. - that static/internal function calls and data accesses can be made without performing any relocations, or that arch-specific startup code handled any such relocations needed. removing these assumptions paves the way for allowing libc.so itself to be built with stack protector (among other things), and is achieved by a three-stage bootstrap process: 1. relative relocations are processed with a flat function. 2. symbolic relocations are processed with no external calls/data. 3. main program and dependency libs are processed with a fully-functional libc/ldso. reduction in arch-specific code is achived through the following: - crt_arch.h, used for generating crt1.o, now provides the entry point for the dynamic linker too. - asm is no longer responsible for skipping the beginning of argv[] when ldso is invoked as a command. - the functionality previously provided by __reloc_self for heavily GOT-dependent RISC archs is now the arch-agnostic stage-1. - arch-specific relocation type codes are mapped directly as macros rather than via an inline translation function/switch statement.
* fix possible clobbering of syscall return values on mipsRich Felker2015-04-071-3/+6
| | | | | | | | | | | | depending on the compiler's interpretation of __asm__ register names for register class objects, it may be possible for the return value in r2 to be clobbered by the function call to __stat_fix. I have not observed any such breakage in normal builds and suspect it only happens with -O0 or other unusual build options, but since there's an ambiguity as to the semantics of this feature, it's best to use an explicit temporary to avoid the issue. based on reporting and patch by Eugene.
* move O_PATH definition back to arch bitsRich Felker2015-04-011-0/+1
| | | | | | | while it's the same for all presently supported archs, it differs at least on sparc, and conceptually it's no less arch-specific than the other O_* macros. O_SEARCH and O_EXEC are still defined in terms of O_PATH in the main fcntl.h.
* fix MINSIGSTKSZ values for archs with large signal contextsRich Felker2015-03-181-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | the previous values (2k min and 8k default) were too small for some archs. aarch64 reserves 4k in the signal context for future extensions and requires about 4.5k total, and powerpc reportedly uses over 2k. the new minimums are chosen to fit the saved context and also allow a minimal signal handler to run. since the default (SIGSTKSZ) has always been 6k larger than the minimum, it is also increased to maintain the 6k usable by the signal handler. this happens to be able to store one pathname buffer and should be sufficient for calling any function in libc that doesn't involve conversion between floating point and decimal representations. x86 (both 32-bit and 64-bit variants) may also need a larger minimum (around 2.5k) in the future to support avx-512, but the values on these archs are left alone for now pending further analysis. the value for PTHREAD_STACK_MIN is not increased to match MINSIGSTKSZ at this time. this is so as not to preclude applications from using extremely small thread stacks when they know they will not be handling signals. unfortunately cancellation and multi-threaded set*id() use signals as an implementation detail and therefore require a stack large enough for a signal context, so applications which use extremely small thread stacks may still need to avoid using these features.
* fix FLT_ROUNDS to reflect the current rounding modeSzabolcs Nagy2015-03-071-1/+0
| | | | | Implemented as a wrapper around fegetround introducing a new function to the ABI: __flt_rounds. (fegetround cannot be used directly from float.h)
* fix POLLWRNORM and POLLWRBAND on mipsTrutz Behn2015-03-041-0/+2
| | | | | | these macros have the same distinct definition on blackfin, frv, m68k, mips, sparc and xtensa kernels. POLLMSG and POLLRDHUP additionally differ on sparc.
* make all objects used with atomic operations volatileRich Felker2015-03-031-7/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the memory model we use internally for atomics permits plain loads of values which may be subject to concurrent modification without requiring that a special load function be used. since a compiler is free to make transformations that alter the number of loads or the way in which loads are performed, the compiler is theoretically free to break this usage. the most obvious concern is with atomic cas constructs: something of the form tmp=*p;a_cas(p,tmp,f(tmp)); could be transformed to a_cas(p,*p,f(*p)); where the latter is intended to show multiple loads of *p whose resulting values might fail to be equal; this would break the atomicity of the whole operation. but even more fundamental breakage is possible. with the changes being made now, objects that may be modified by atomics are modeled as volatile, and the atomic operations performed on them by other threads are modeled as asynchronous stores by hardware which happens to be acting on the request of another thread. such modeling of course does not itself address memory synchronization between cores/cpus, but that aspect was already handled. this all seems less than ideal, but it's the best we can do without mandating a C11 compiler and using the C11 model for atomics. in the case of pthread_once_t, the ABI type of the underlying object is not volatile-qualified. so we are assuming that accessing the object through a volatile-qualified lvalue via casts yields volatile access semantics. the language of the C standard is somewhat unclear on this matter, but this is an assumption the linux kernel also makes, and seems to be the correct interpretation of the standard.
* add syscall numbers for the new execveat syscallSzabolcs Nagy2015-02-091-0/+2
| | | | | | | | | this syscall allows fexecve to be implemented without /proc, it is new in linux v3.19, added in commit 51f39a1f0cea1cacf8c787f652f26dfee9611874 (sh and microblaze do not have allocated syscall numbers yet) added a x32 fix as well: the io_setup and io_submit syscalls are no longer common with x86_64, so use the x32 specific numbers.
* move MREMAP_MAYMOVE and MREMAP_FIXED out of bitsTrutz Behn2015-01-301-3/+0
| | | | | | the definitions are generic for all kernel archs. exposure of these macros now only occurs on the same feature test as for the function accepting them, which is believed to be more correct.
* remove mips-only EINIT and EREMDEV errnosTrutz Behn2015-01-301-2/+0
| | | | | the errno values are unused by the kernel and the macro definitions were never exposed by glibc.
* add new syscall numbers for bpf and kexec_file_loadSzabolcs Nagy2014-12-231-0/+2
| | | | | | | | | | | these syscalls are new in linux v3.18, bpf is present on all supported archs except sh, kexec_file_load is only allocted for x86_64 and x32 yet. bpf was added in linux commit 99c55f7d47c0dc6fc64729f37bf435abf43f4c60 kexec_file_load syscall number was allocated in commit f0895685c7fd8c938c91a9d8a6f7c11f22df58d2
* move wint_t definition to the shared part of alltypes.h.inRich Felker2014-12-211-1/+0
|
* add explicit barrier operation to internal atomic.h APIRich Felker2014-10-101-1/+3
|
* add new syscall numbers for seccomp, getrandom, memfd_createSzabolcs Nagy2014-10-081-0/+6
| | | | | | | | | | | | | | | | | | these syscalls are new in linux v3.17 and present on all supported archs except sh. seccomp was added in commit 48dc92b9fc3926844257316e75ba11eb5c742b2c it has operation, flags and pointer arguments (if flags==0 then it is the same as prctl(PR_SET_SECCOMP,...)), the uapi header for flag definitions is linux/seccomp.h getrandom was added in commit c6e9d6f38894798696f23c8084ca7edbf16ee895 it provides an entropy source when open("/dev/urandom",..) would fail, the uapi header for flags is linux/random.h memfd_create was added in commit 9183df25fe7b194563db3fec6dc3202a5855839c it allows anon mmap to have an fd, that can be shared, sealed and needs no mount point, the uapi header for flags is linux/memfd.h
* add threads.h and needed per-arch types for mtx_t and cnd_tRich Felker2014-09-061-0/+2
| | | | | | | | | | | | | | | | based on patch by Jens Gustedt. mtx_t and cnd_t are defined in such a way that they are formally "compatible types" with pthread_mutex_t and pthread_cond_t, respectively, when accessed from a different translation unit. this makes it possible to implement the C11 functions using the pthread functions (which will dereference them with the pthread types) without having to use the same types, which would necessitate either namespace violations (exposing pthread type names in threads.h) or incompatible changes to the C++ name mangling ABI for the pthread types. for the rest of the types, things are much simpler; using identical types is possible without any namespace considerations.
* add working a_spin() atomic for non-x86 targetsRich Felker2014-08-251-0/+1
| | | | | | | | | | | | | conceptually, a_spin needs to be at least a compiler barrier, so the compiler will not optimize out loops (and the load on each iteration) while spinning. it should also be a memory barrier, or the spinning thread might keep spinning without noticing stores from other threads, thus delaying for longer than it should. ideally, an optimal a_spin implementation that avoids unnecessary cache/memory contention should be chosen for each arch, but for now, the easiest thing is to perform a useless a_cas on the calling thread's stack.
* add max_align_t definition for C11 and C++11Rich Felker2014-08-201-0/+2
| | | | | | | | | | | | | | | | | unfortunately this needs to be able to vary by arch, because of a huge mess GCC made: the GCC definition, which became the ABI, depends on quirks in GCC's definition of __alignof__, which does not match the formal alignment of the type. GCC's __alignof__ unexpectedly exposes the an implementation detail, its "preferred alignment" for the type, rather than the formal/ABI alignment of the type, which it only actually uses in structures. on most archs the two values are the same, but on some (at least i386) the preferred alignment is greater than the ABI alignment. I considered using _Alignas(8) unconditionally, but on at least one arch (or1k), the alignment of max_align_t with GCC's definition is only 4 (even the "preferred alignment" for these types is only 4).
* make pointers used in robust list volatileRich Felker2014-08-171-1/+1
| | | | | | | | | | | | | | | | | | | | when manipulating the robust list, the order of stores matters, because the code may be asynchronously interrupted by a fatal signal and the kernel will then access the robust list in what is essentially an async-signal context. previously, aliasing considerations made it seem unlikely that a compiler could reorder the stores, but proving that they could not be reordered incorrectly would have been extremely difficult. instead I've opted to make all the pointers used as part of the robust list, including those in the robust list head and in the individual mutexes, volatile. in addition, the format of the robust list has been changed to point back to the head at the end, rather than ending with a null pointer. this is to match the documented kernel robust list ABI. the null pointer, which was previously used, only worked because faults during access terminate the robust list processing.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-06 10:01:18 +0000