about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* fix FILE buffer underflow in ungetwcRich Felker2016-04-261-3/+3
| | | | | | | | | | | | | | | | | | | | | commit 7e816a6487932cbb3cb71d94b609e50e81f4e5bf (version 1.1.11 release cycle) moved the code that performs wchar_t to multibyte conversion across code that used the resulting length in bytes, thereby breaking the unget buffer space check in ungetwc and clobbering up to three bytes below the start of the buffer. for allocated FILEs (all read-enabled FILEs except stdin), the underflow clobbers at most the FILE-specific locale pointer. no stores are performed through this pointer, but subsequent loads may result in a crash or mismatching encoding rule (UTF-8 multibyte vs byte-based). for stdin, the buffer lies in .bss and the underflow may clobber another object. in practice, for libc.so the adjacent object seems to be stderr's buffer, which is completely unused, but this could vary with linking options, or when static linking. applications which do not attempt to use more than one character of ungetwc pushback, or which do not use ungetwc, are not affected.
* fix thread structure/dtv-pointer corruption on powerpcRich Felker2016-04-251-0/+5
| | | | | | | | | | | | | | per the powerpc psabi, offset 4 of the stack at call time belongs to the callee and is used for spilling lr (return address). in addition, offset 0 on the stack must contain a pointer to the previous stack frame, or a null pointer for the initial stack frame of a thread. __clone failed to setup any stack frame on the new thread's stack, thereby allowing the start function it called to clobber offset 4 of the new thread's struct __pthread, which contains the dtv pointer. add code to setup a proper stack frame and align the stack pointer to a multiple of 16 (also an abi requirement) if it was not already aligned.
* remove dead store in res_msendPetr Vaněk2016-04-181-1/+0
| | | | The variable nss is set to zero in following line.
* add mips n32 port (ILP32 ABI for mips64)Rich Felker2016-04-1846-0/+2375
| | | | based on patch submitted by Jaydeep Patil, with minor changes.
* add support for mips and mips64 r6 isaRich Felker2016-04-037-22/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | mips32r6 and mips64r6 are actually new isas at both the asm source and opcode levels (pre-r6 code cannot run on r6) and thus need to be treated as a new subarch. the following changes are made, some of which yield code generation improvements for non-r6 targets too: - add subarch logic in configure script and reloc.h files for dynamic linker name. - suppress use of .set mips2 asm directives (used to allow mips2 atomic instructions on baseline mips1 builds; the kernel has to emulate them on mips1) except when actually needed. they cause wrong instruction encodings on r6, and pessimize inlining on at least some compilers. - only hard-code sync instruction encoding on mips1. - use "ZC" constraint instead of "m" constraint for llsc memory operands on r6, where the ll/sc instructions no longer accept full 16-bit offsets. - only hard-code rdhwr instruction encoding with .word on targets (pre-r2) where it may need trap-and-emulate by the kernel. otherwise, just use the instruction mnemonic, and allow an arbitrary destination register to be used.
* fix read past end of haystack buffer for short needles in memmemRich Felker2016-04-011-0/+1
| | | | | | | | | | | | | | the two/three/four byte memmem specializations are not prepared to handle haystacks shorter than the needle; they unconditionally read at least up to the needle length and subtract from the haystack length. if the haystack is shorter, the remaining haystack length underflows and produces an unbounded search which will eventually either crash or find a spurious match. the top-level memmem function attempted to avoid this case already by checking for haystack shorter than needle, but it failed to re-check after using memchr to remove the maximal prefix not containing the first byte of the needle.
* fix regression disabling use of pause instruction for x86 a_spinRich Felker2016-03-293-3/+3
| | | | | | | | | | | commits e24984efd5c6ac5ea8e6cb6cd914fa8435d458bc and 16b55298dc4b6a54d287d7494e04542667ef8861 inadvertently disabled the a_spin implementations for i386, x86_64, and x32 by defining a macro named a_pause instead of a_spin. this should not have caused any functional regression, but it inhibited cpu relaxation while spinning for locks. bug reported by George Kulakowski.
* fix undefined pointer comparison in stdio-internal __toreadRich Felker2016-03-281-1/+1
| | | | | | | | | | | | | | the comparison f->wpos > f->buf has undefined behavior when f->wpos is a null pointer, despite the intuition (and actual compiler behavior, for all known compilers) being that NULL > ptr is false for all valid pointers ptr. the purpose of the comparison is to determine if the write buffer is non-empty, and the idiom used elsewhere for that is comparison against f->wbase, which is either a null pointer when not writing, or equal to f->buf when writing. in the former case, both f->wpos and f->wbase are null; in the latter they are both non-null and point into the same array.
* fix gethostbyaddr_r to fill struct hostent.h_length as appropriateTimo Teräs2016-03-241-0/+1
|
* add MADV_FREE madvise command from linux v4.5Szabolcs Nagy2016-03-191-0/+1
| | | | | | allows the os to free the marked pages lazily on memory pressure. expected to increase malloc performance. new in linux commit 854e9ed09dedf0c19ac8640e91bcc74bc3f9e5c9
* add EPOLLEXCLUSIVE epoll flag from linux v4.5Szabolcs Nagy2016-03-191-0/+1
| | | | | | new flag for exclusive wakeup mode when an event source fd is attached to multiple epoll fds but they should not all receive the events. new in linux commit df0108c5da561c66c333bb46bfe3c1fc65905898
* add SO_ATTACH_REUSEPORT_[CE]BPF socket options from linux v4.5Szabolcs Nagy2016-03-191-1/+2
| | | | | | new socket options for setting classic or extended BPF program for sockets in a SO_REUSEPORT group. added in linux commit 538950a1b7527a0a52ccd9337e3fcd304f027f13
* add IPV6_HDRINCL socket option from linux v4.5Szabolcs Nagy2016-03-191-0/+1
| | | | | new in linux commit 715f504b118998c41a2079a17e16bf5a8a114885 same as IP_HDRINCL but for SOL_IPV6 sockets.
* add copy_file_range syscall numbers from linux v4.5Szabolcs Nagy2016-03-199-0/+18
| | | | | | | it was introduced for offloading copying between regular files in linux commit 29732938a6289a15e907da234d6692a2ead71855 (microblaze and sh does not yet have the syscall number.)
* mips64: add recent linux syscall numbersSzabolcs Nagy2016-03-191-0/+6
| | | | add userfaultfd, membarrier and mlock2 system call numbers.
* fix outdated pathnames in COPYRIGHT fileRich Felker2016-03-181-3/+3
|
* deduplicate bits/mman.hSzabolcs Nagy2016-03-1813-617/+84
| | | | | | | | | | | currently five targets use the same mman.h constants and the rest share most constants too, so move them to sys/mman.h before the bits/mman.h include where the differences can be corrected by redefinition of the macros. this fixes two minor bugs: POSIX_MADV_DONTNEED was wrong on most targets (it should be the same as MADV_DONTNEED), and sh defined the x86-only MAP_32BIT mmap flag.
* fix padding string formats to width in wide printf variantsRich Felker2016-03-161-4/+4
| | | | | | | the idiom fprintf(f, "%.*s", n, "") was wrongly used in vfwprintf as a means of producing n spaces; instead it produces no output. the correct form is fprintf(f, "%*s", n, ""), using width instead of precision, since for %s the later is a maximum rather than a minimum.
* correct pointer types for a_ll_p and a_sc_p primitives on mips64Rich Felker2016-03-111-4/+4
| | | | | | | | these changes should not affect generated code, but they reflect that the underlying objects operated on by a_cas_p are supposed to have type volatile void *, not volatile long. in theory a compiler could treat the effective type mismatch in the "m" memory operands as undefined behavior.
* make mips64 a_sc_p atomic primitive's asm constraints work with clangRich Felker2016-03-111-1/+1
| | | | | | | apparently clang does not accept matching-register input and output constraints that differ in size (32-bit vs 64-bit). based on patch by Jaydeep Patil.
* make configure check for unsupported (SPE) powerpc hard-float modelsRich Felker2016-03-061-0/+2
| | | | | | the SPE ABI may be compatible with soft-float, but actually making it work requires some additional work, so for now it's best to make sure broken builds don't happen.
* add powerpc soft-float supportFelix Fietkau2016-03-067-35/+65
| | | | | | | | | Some PowerPC CPUs (e.g. Freescale MPC85xx) have a completely different instruction set for floating point operations (SPE). Executing regular PowerPC floating point instructions results in "Illegal instruction" errors. Make it possible to run these devices in soft-float mode.
* env: avoid leaving dangling pointers in __env_mapAlexander Monakov2016-03-061-0/+1
| | | | | | This is the minimal fix for __putenv leaving a pointer to freed heap storage in __env_map array, which could later on lead to errors such as double-free.
* update documentation files for mips64 portRich Felker2016-03-062-0/+11
|
* add mips64 portRich Felker2016-03-0647-1/+2546
| | | | | patch by Mahesh Bodapati and Jaydeep Patil of Imagination Technologies.
* generalize mips-specific reloc code not to hard-code sym/type encodingRich Felker2016-03-062-1/+3
| | | | | | | | | this change is made in preparation for adding the mips64 port, which needs a 64-bit (and mips64-specific) form of the R_INFO macro, but it's a better abstraction anyway. based on part of the mips64 port patch by Mahesh Bodapati and Jaydeep Patil of Imagination Technologies.
* math: fix expf(-NAN) and exp2f(-NAN) to return -NAN instead of 0Szabolcs Nagy2016-03-042-0/+4
| | | | | | expf(-NAN) was treated as expf(-large) which unconditionally returns +0, so special case +-NAN. reported by Petr Hosek.
* add sched_getcpu vDSO supportNathan Zadoks2016-03-022-0/+33
| | | | | This brings the call to an actually usable speed. Quick unscientific benchmark: 14ns : 102ns :: vDSO : syscall
* add sched_getcpuNathan Zadoks2016-03-022-0/+14
| | | | | This is a GNU extension, but a fairly minor one, for a system call that otherwise has no libc wrapper.
* fix ^* at the start of a complete BRESzabolcs Nagy2016-03-021-0/+4
| | | | | | | | | | This is a workaround to treat * as literal * at the start of a BRE. Ideally ^ would be treated as an anchor at the start of any BRE subexpression and similarly $ would be an anchor at the end of any subexpression. This is not required by the standard and hard to do with the current code, but it's the existing practice. If it is changed, * should be treated as literal after such anchor as well.
* fix * at the start of a BRE subexpressionSzabolcs Nagy2016-03-021-4/+0
| | | | | | | | commit 7eaa76fc2e7993582989d3838b1ac32dd8abac09 made * invalid at the start of a BRE subexpression, but it should be accepted as literal * there according to the standard. This patch does not fix subexpressions starting with ^*.
* explicitly include stdio.h to get EOF definition needed by wctobMichael Meeuwisse2016-03-021-0/+1
|
* handle non-matching address family entries in hosts fileRich Felker2016-03-021-3/+11
| | | | | | | | | | | | | name_from_hosts failed to account for the possibility of an address family error from name_from_numeric, wrongly counting such a return as success and using the uninitialized address data as part of the results passed up to the caller. non-matching address family entries cannot simply be ignored or results would be inconsistent with respect to whether AF_UNSPEC or a specific address family is queried. instead, record that a non-matching entry was seen, and fail the lookup with EAI_NONAME of no matching-family entries are found.
* make aarch64 atomic_arch.h report that it defines pointer-sized ll/scRich Felker2016-02-231-0/+2
| | | | | | | | at present this is done only for consistency, since this file defines its own a_cas_p rather than using the new generic one from atomic.h added in commit 225f6a6b5b7173b6655e4f5d49b5b9fea70bf3bb. these definitions may however be useful if we ever need to add other pointer-sized atomic operations.
* allow implementing a_cas_p with pointer-sized ll/scBobby Bingham2016-02-231-0/+18
| | | | | No current ports do this, but it will be useful for porting to 64-bit ll/sc architectures, such as mips64 and powerpc64.
* release 1.1.14 v1.1.14Rich Felker2016-02-222-1/+14
|
* generate list of crt files to install instead of hard-coding in makefileRich Felker2016-02-191-1/+1
| | | | | | | this follows the principle of having the source tree layout define build semantics. it also makes it possible for crt/$(ARCH) to define additional installable files, which may be needed for midipix and other future targets.
* add arch tuple matching for nt32 and nt64 in configureRich Felker2016-02-191-0/+2
| | | | | | | | | the nt32 and nt64 archs will be provided by the midipix project for building musl on top of its posix-like syscall layer for windows. at present the needed arch files are in a separate repository, but having the tuple matching in the upstream configure script should make it possible to overlay the arch files without needing any further patching.
* work around regression building for armhf with clang (compiler bug)Rich Felker2016-02-193-2/+16
| | | | | | | | | commit e4355bd6bec89688e8c739cd7b4c76e675643dca moved the math asm from external source files to inline asm, but unfortunately, all current releases of clang use the wrong inline asm constraint codes for float and double ("w" and "P" instead of "t" and "w", respectively). this patch adds detection for the bug in configure, and, for now, just disables the affected asm on broken clang versions.
* improve macro logic for enabling arm math asmRich Felker2016-02-182-2/+2
| | | | | | | | | in order to take advantage of the fpu in -mfloat-abi=softfp mode, the __VFP_FP__ (presence of vfp fpu) was checked instead of checking for __ARM_PCS_VFP (hardfloat EABI variant). however, the latter macro is the one that's actually specified by the ABI documents rather than being compiler-specific, and should also be checked in case __VFP_FP__ is not defined on some compilers or some configurations.
* update authors/contributors listRich Felker2016-02-181-0/+9
| | | | | | | these additions were made based on scanning commit authors since the last update, at the time of the 1.1.7 release, and adding everyone with either substantial code contributions or a pattern of ongoing simple patch submission.
* fix regression in SH/FDPIC dynamic linkerRich Felker2016-02-182-1/+2
| | | | | | | | | | | | | the dynamic linker was found to hang when used as the PT_INTERP, but not when invoked as a command. the mechanism of this failure was not determined, but the cause is clear: commit 5552ce52000855906a5cb4f08f2e456573cca51f removed the SHARED macro, but arch/sh/crt_arch.h is still using it to choose the right form of the crt/ldso entry point code. moving the forced definition from rcrt1.c to dlstart.c restores the old behavior. eventually the logic should be changed to fully remove the SHARED macro or at least rename it to something more reasonable.
* partly revert detection of broken float in configureRich Felker2016-02-181-1/+1
| | | | | | | | | commit 80fbaac4cd1930e9545a5d36bf46ae49011d2ce8 broke all soft-float archs, where gcc defines __GCC_IEC_559==0 because rounding modes and exception flags are not supported. for now, just check for __FAST_MATH__ as an indication of broken float. this won't detect all possible misconfigurations but it probably catches the most common one.
* support clean/distclean make targets in unconfigured treeRich Felker2016-02-171-10/+16
| | | | | | | | | | commit 2f853dd6b9a95d5b13ee8f9df762125e0588df5d moved the error handling for $(ARCH) not being set such that it applied to all targets, including clean and distclean. previously these targets worked even in an unconfigured tree. to restore the old behavior, make most of the makefile body conditional on $(ARCH) being set/non-empty and produce the error via a fake "all" target in the conditional branch for the case where $(ARCH) is empty.
* adjust makefile to make crt/ and ldso/ sources arch-replaceableRich Felker2016-02-171-15/+18
| | | | | | | | | | | | | | | | prior to commit 2f853dd6b9a95d5b13ee8f9df762125e0588df5d which overhauled the makefile for out-of-tree builds, crt/*.c files were replaceable by crt/$(ARCH)/*.s, and top-level ldso/ did not exist (its files were under src/ldso). since then, crti.o and crtn.o have been hard-coded as arch-specific, but none of the other files in crt/ or ldso/ were replaceable at all. in preparation for easy integration with midipix, which has a port of musl to windows, it needs to be possible to override the ELF-specific code in these files. making the same arch-replacements system work throughout the whole source tree also improves consistency and removes the need for some file-specific rules (crti.o and crtn.o) in the makefile.
* make configure attempt to catch broken floating point CFLAGS/defaultsRich Felker2016-02-171-0/+10
|
* in crypt-sha*, reject excessive rounds as error rather than clampingRich Felker2016-02-162-2/+2
| | | | | | | | | the reference implementation clamps rounds to [1000,999999999]. we further limited rounds to at most 9999999 as a defense against extreme run times, but wrongly clamped instead of treating out-of-bounds values as an error, thereby producing implementation-specific hash results. fixing this should not break anything since values of rounds this high are not useful anyway.
* fix unlikely corner cases in getopt's message printingRich Felker2016-02-161-2/+2
| | | | | | | | | | | | like fputs (see commit 10a17dfbad2c267d885817abc9c7589fc7ff630b), the message printing code for getopt assumed that fwrite only returns 0 on failure, but it can also happen on success if the total length to be written is zero. programs with zero-length argv[0] were affected. commit 500c6886c654fd45e4926990fee2c61d816be197 introduced this problem in getopt by fixing the fwrite behavior to conform to the requirements of ISO C. previously the wrong expectations of the getopt code were met by the fwrite implementation.
* fix assumption in fputs that fwrite returning 0 implies an errorRich Felker2016-02-161-1/+2
| | | | | | | | | | internally, the idiom of passing nmemb=1 to fwrite and interpreting the return value of fwrite (which is necessarily 0 or 1) as failure/success is fairly widely used. this is not correct, however, when the size argument is unknown and may be zero, since C requires fwrite to return 0 in that special case. previously fwrite always returned nmemb on success, but this was changed for conformance with ISO C by commit 500c6886c654fd45e4926990fee2c61d816be197.
* release 1.1.13 v1.1.13Rich Felker2016-02-152-1/+61
|