about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
...
* fix writes outside buffer by ungetc after setvbufRich Felker2018-07-131-1/+1
| | | | | | | | | commit 0b80a7b0404b6e49b0b724e3e3fe0ed5af3b08ef, which added non-stub setvbuf, applied the UNGET pushback adjustment to the size of the buffer passed in, but inadvertently omitted offsetting the start by the same amount, thereby allowing unget to clobber up to 8 bytes before the start of the buffer. this bug was introduced in the present release cycle; no releases are affected.
* add ST_RELATIME to statvfs.hRich Felker2018-07-121-0/+1
|
* resolver: don't depend on v4mapped ipv6 to probe routability of v4 addrsRich Felker2018-07-111-15/+32
| | | | | | | | | | | | | | | | | | to produce sorted results roughly corresponding to RFC 3484/6724, __lookup_name computes routability and choice of source address via dummy UDP connect operations (which do not produce any packets). since at the logical level, the properties fed into the sort key are computed on ipv6 addresses, the code was written to use the v4mapped ipv6 form of ipv4 addresses and share a common code path for them all. however, on kernels where ipv6 support has been completely omitted, this causes ipv4 to appear equally unroutable as ipv6, thereby putting unreachable ipv6 addresses before ipv4 addresses in the results. instead, use only ipv4 sockets to compute routability for ipv4 addresses. some gratuitous conversion back and forth is left so that the logic is not affected by these changes. it may be possible to simplify the ipv4 case considerably, thereby reducing code size and complexity.
* optimize explicit_bzero for sizeAlexander Monakov2018-07-021-1/+1
| | | | | Avoid saving/restoring the incoming argument by reusing memset return value.
* avoid spurious dso matches by dladdr outside bounds of load segmentsRich Felker2018-06-281-1/+10
| | | | | | | | | | | | | | | since slack space at the beginning and/or end of writable load maps is donated to malloc, the application could obtain valid pointers in these ranges which dladdr would erroneously identify as part of the shared object whose mapping they came from. instead of checking the queried address against the mapping base and length, check it against the load segments from the program headers, and only match the dso if it lies within the bounds of one of them. as a shortcut, if the address does match the range of the mapping but not any of the load segments, we know it cannot match any other dso and can immediately return failure.
* make dladdr consistently produce the first symbol in presence of aliasesRich Felker2018-06-281-1/+1
| | | | | | | the early-exit condition for the symbol match loop on exact matches caused dladdr to produce the first match for an exact match, but the last match for an inexact match. in the interest of consistency, require a strictly-closer match to replace an already-found one.
* fix symtab-order-dependent spurious matches in dladdrRich Felker2018-06-281-5/+8
| | | | | | | | | | | | commit 8b8fb7f03721c42445f982582f462144ab60a1a0 added logic to prevent matching a symbol with no recorded size (closest-match) when there is an intervening symbol whose size was recorded, but it only worked when the intervening symbol was encountered later in the search. instead of rejecting symbols where addr falls outside their recorded size during the closest-match search, accept them to find the true closest-match, then reject such a result only once the search has finished.
* correctly handle non-matching symbols in dladdrRich Felker2018-06-271-4/+13
| | | | | | | | | | | | | | | | | based on patch by Axel Siebenborn, with fixes discussed on the mailing list after submission and and rebased around the UB fix in commit e829695fcc880f8578c2b964ea2d090f0016c9d7. avoid spurious symbol matches by dladdr beyond symbol size. for symbols with a size recorded, only match if the queried address lies within the address range determined by the symbol address and size. for symbols with no size recorded, the old closest-match behavior is kept, as long as there is no intervening symbol with a recorded size. the case where no symbol is matched, but the address does lie within the memory range of a shared object, is specified as success. fix the return value and produce a valid (with null dli_sname and dli_saddr) Dl_info structure.
* avoid using undefined pointer arithmetic in dladdrRich Felker2018-06-271-8/+9
|
* fix missing timeout argument to futex syscall in __futexwaitPatrick Oppenlander2018-06-261-2/+2
|
* add explicit_bzero implementationDavid Carlier2018-06-262-0/+9
| | | | | | | | | maintainer's note: past sentiment was that, despite being imperfect and unable to force clearing of all possible copies of sensitive data (e.g. in registers, register spills, signal contexts left on the stack, etc.) this function would be added if major implementations agreed on it, which has happened -- several BSDs and glibc all include it.
* inet_ntop: do not compress single zeros in IPv6Arthur Jones2018-06-261-1/+1
| | | | | | | | | maintainer's note: this change is for conformance with RFC 5952, 4.2.2, which explicitly forbids use of :: to shorten a single 16-bit 0 field when producing the canonical text representation for an IPv6 address. fixes a test failure reported by Philip Homburg, who also submitted a patch, but this fix is simpler and should produce smaller code.
* strftime: fix underlying format string in %z formatDaniel Sabogal2018-06-261-1/+1
| | | | the expression (tm->__tm_gmtoff)/3600 has type long. use %+.2ld instead.
* resolver: omit final dot (root/suppress-search) in canonical nameRich Felker2018-06-261-0/+4
| | | | | | | | | | | | | | | | | | | | | | if a final dot was included in the queried host name to anchor it to the dns root/suppress search domains, and the result was not a CNAME, the returned canonical name included the final dot. this was not consistent with other implementations, confused some applications, and does not seem desirable. POSIX specifies returning a pointer to, or to a copy of, the input nodename, when the canonical name is not available, but does not attempt to specify what constitutes "not available". in the case of search, we already have an implementation-defined "availability" of a canonical name as the fully-qualified name resulting from search, so defining it similarly in the no-search case seems reasonable in addition to being consistent with other implementations. as a bonus, fix the case where more than one trailing dot is included, since otherwise the changes made here would wrongly cause lookups with two trailing dots to succeed. previously this case resulted in malformed dns queries and produced EAI_AGAIN after a timeout. now it fails immediately with EAI_NONAME.
* fix regression in powerpc[64] SO_PEERSEC definitionRich Felker2018-06-262-0/+2
| | | | | | | commit 587f5a53bc3a68d80b239ba515d583df690a96df moved the definition of SO_PEERSEC to bits/socket.h for archs where the SO_* macros differ from their standard values, but failed to add copies of the generic definition for powerpc and powerpc64.
* fix value of SO_PEERSEC on mips archsRich Felker2018-06-264-1/+4
| | | | adapted from patch by Matthias Schiffer.
* add m68k reg.h and user.hRich Felker2018-06-262-0/+78
|
* fix dynamic linker mapping/clearing bss in first/only LOAD segmentRich Felker2018-06-261-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | writable load segments can have size-in-memory larger than their size in the ELF file, representing bss or equivalent. the initial partial page has to be zero-filled, and additional anonymous pages have to be mapped such that accesses don't failt with SIGBUS. map_library skips redundant MAP_FIXED mapping of the initial (lowest-address) segment when processing LOAD segments since it was already mapped when reserving the virtual address range, but in doing so, inadvertently also skipped the code to fill/map bss. typical executable and library files have two or more LOAD segments, and the first one is text/rodata (non-writable) and thus has no bss, but it is syntactically valid for an ELF program/library to put its writable segment first, or to have only one segment (everything writable). the binutils bfd-based linker has been observed to create such programs in the presence of unusual sections or linker scripts. fix by moving only the mmap_fixed operation under the conditional rather than skipping the remainder of the loop body. add a check to avoid bss processing in the case where the segment is not writable; this should not happen, but if it does, the change would be a crashing regression without this check.
* add memfd_create syscall wrapperSzabolcs Nagy2018-06-202-0/+13
| | | | memfd_create was added in linux v3.17 and glibc has api for it.
* add mlock2 linux syscall wrapperSzabolcs Nagy2018-06-202-3/+18
| | | | | | | | mlock2 syscall was added in linux v4.4 and glibc has api for it. It falls back to mlock in case of flags==0, so that case works even on older kernels. MLOCK_ONFAULT is moved under _GNU_SOURCE following glibc.
* fix m68k float.h long double exponent rangeRich Felker2018-06-201-2/+2
| | | | | unlike the x86 variant, the m68k ld80 format allows (biased) exponent zero with mantissa msb set, thereby extending the normal range.
* work around broken kernel struct ipc_perm on some big endian archsRich Felker2018-06-207-6/+79
| | | | | | | | | | | | | | | the mode member of struct ipc_perm is specified by POSIX to have type mode_t, which is uniformly defined as unsigned int. however, Linux defines it with type __kernel_mode_t, and defines __kernel_mode_t as unsigned short on some archs. since there is a subsequent padding field, treating it as a 32-bit unsigned int works on little endian archs, but the order is backwards on big endian archs with the erroneous definition. since multiple archs are affected, remedy the situation with fixup code in the affected functions (shmctl, semctl, and msgctl) rather than repeating the same shims in syscall_arch.h for every affected arch.
* s390x: add kexec_file_load syscall number from linux v4.17Szabolcs Nagy2018-06-191-0/+1
| | | | new in linux commit 71406883fd35794d573b3085433c41d0a3bf6c21
* mips: add HWCAP_ flags from linux v4.17Szabolcs Nagy2018-06-193-0/+3
| | | | new in linux commit 256211f2b0b251e532d1899b115e374feb16fa7a
* aarch64: add HWCAP_ flags from linux v4.17Szabolcs Nagy2018-06-191-0/+4
| | | | | hwcaps for armv8.4, new in linux commit 7206dc93a58fb76421c4411eefa3c003337bcb2d
* add speculation control prctls from linux v4.17Szabolcs Nagy2018-06-191-0/+9
| | | | | | | PR_{SET,GET}_SPECULATION_CTRL controls speculation related vulnerability mitigations, new in commits b617cfc858161140d69cc0b5cc211996b557a1c7 356e4bfff2c5489e016fdb925adbf12a1e3950ee
* add ETH_P_PREAUTH ethertype from linux v4.17Szabolcs Nagy2018-06-191-0/+1
| | | | added in linux commit 4fe0de5b143762d327bfaf1d7be7c5b58041a18c
* add TCP_NLA_* from linux v4.17Szabolcs Nagy2018-06-191-0/+10
| | | | | | | | new and missing netlink attributes types for SCM_TIMESTAMPING_OPT_STATS, new ones were added in commits 7156d194a0772f733865267e7207e0b08f81b02b be631892948060f44b1ceee3132be1266932071e 87ecc95d81d951b0984f2eb9c5c118cb68d0dce8
* add {MSG,SEM,SHM}_STAT_ANY from linux v4.17Szabolcs Nagy2018-06-193-0/+3
| | | | | | | | introduced to stat ipc objects without permission checks since the info is available in /proc/sysvipc anyway, new in linux commits 23c8cec8cf679b10997a512abb1e86f0cedc42ba a280d6dc77eb6002f269d58cd47c7c7e69b617b6 c21a6970ae727839a2f300cd8dd957de0d0238c3
* add MAP_FIXED_NOREPLACE from linux v4.17Szabolcs Nagy2018-06-191-0/+1
| | | | | | | to map at a fixed address without unmapping underlying mappings (fails with EEXIST unlike MAP_FIXED), new in linux commits 4ed28639519c7bad5f518e70b3284c6e0763e650 and a4ff8e8620d3f4f50ac4b41e8067b7d395056843.
* powerpc: add pkey syscall numbers from linux v4.16Szabolcs Nagy2018-06-192-0/+6
| | | | | | add pkey_mprotect, pkey_alloc, pkey_free syscall numbers, new in linux commits 3350eb2ea127978319ced883523d828046af4045 and 9499ec1b5e82321829e1c1510bcc37edc20b6f38
* aarch64: add HWCAP_ASIMDFHM from linux v4.16Szabolcs Nagy2018-06-191-0/+1
| | | | | armv8.4 fp mul instructions. added in commit 3b3b681097fae73b7f5dcdd42db6cfdf32943d4c
* sys/ptrace.h: add PTRACE_SECCOMP_GET_METADATA from linux v4.16Szabolcs Nagy2018-06-191-1/+7
| | | | | | | | to get seccomp state for checkpoint restore. added in linux commit 26500475ac1b499d8636ff281311d633909f5d20 struct tag follows the glibc api and ptrace_peeksiginfo_args got changed too accordingly.
* netinet/if_ether.h: add ETH_TLEN from linux v4.16Szabolcs Nagy2018-06-191-0/+1
| | | | | octets in ethernet type field added in linux commit 4bbb3e0e8239f9079bf1fe20b3c0cb598714ae61
* netinet/if_ether.h: add ETH_P_ERSPAN2 from linux v4.16Szabolcs Nagy2018-06-191-0/+1
| | | | | protocol number for erspan v2 support added in linux commit f551c91de262ba36b20c3ac19538afb4f4507441
* sys/epoll.h: add EPOLLNVAL from linux v4.16Szabolcs Nagy2018-06-191-0/+1
| | | | | | added to uapi in commit 65aaf87b3aa2d049c6b9fd85221858a895df3393 used since commit a9a08845e9acbd224e4ee466f5c1275ed50054e8, which renamed POLL* to EPOLL* in the kernel.
* add m68k portRich Felker2018-06-1927-0/+1079
| | | | | | | | | | | | | three ABIs are supported: the default with 68881 80-bit fpu format and results returned in floating point registers, softfloat-only with the same format, and coldfire fpu with IEEE single/double only. only the first is tested at all, and only under qemu which has fpu emulation bugs. basic functionality smoke tests have been performed for the most common arch-specific breakage via libc-test and qemu user-level emulation. some sysvipc failures remain, but are shared with other big endian archs and will be fixed separately.
* add support for m68k 80-bit long double variantRich Felker2018-06-142-2/+21
| | | | | | | | | since x86 and m68k are the only archs with 80-bit long double and each has mandatory endianness, select the variant via endianness. differences are minor: apparently just byte order and representation of infinities. the m68k format is not well-documented anywhere I could find, so if other differences are found they may require additional changes later.
* add missing m68k relocation types in elf.hRich Felker2018-06-121-1/+19
|
* fix TLS layout of TLS variant I when there is a gap above TPSzabolcs Nagy2018-06-0215-17/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | In TLS variant I the TLS is above TP (or above a fixed offset from TP) but on some targets there is a reserved gap above TP before TLS starts. This matters for the local-exec tls access model when the offsets of TLS variables from the TP are hard coded by the linker into the executable, so the libc must compute these offsets the same way as the linker. The tls offset of the main module has to be alignup(GAP_ABOVE_TP, main_tls_align). If there is no TLS in the main module then the gap can be ignored since musl does not use it and the tls access models of shared libraries are not affected. The previous setup only worked if (tls_align & -GAP_ABOVE_TP) == 0 (i.e. TLS did not require large alignment) because the gap was treated as a fixed offset from TP. Now the TP points at the end of the pthread struct (which is aligned) and there is a gap above it (which may also need alignment). The fix required changing TP_ADJ and __pthread_self on affected targets (aarch64, arm and sh) and in the tlsdesc asm the offset to access the dtv changed too.
* fix output size handling for multi-unicode-char big5-hkscs charactersRich Felker2018-06-011-5/+13
| | | | | | | | | | | | | | | | | | | | since this iconv implementation's output is stateless, it's necessary to know before writing anything to the output buffer whether the conversion of the current input character will fit. previously we used a hard-coded table of the output size needed for each supported output encoding, but failed to update the table when adding support for conversion to jis-based encodings and again when adding separate encoding identifiers for implicit-endianness utf-16/32 and ucs-2/4 variants, resulting in out-of-bound table reads and incorrect size checks. no buffer overflow was possible, but the affected characters could be converted incorrectly, and iconv could potentially produce an incorrect return value as a result. remove the hard-coded table, and instead perform the recursive iconv conversion to a temporary buffer, measuring the output size and transferring it to the actual output buffer only if the whole converted result fits.
* fix iconv mapping of big5-hkscs characters that map to two unicode charsRich Felker2018-06-011-1/+1
| | | | | | | | | | | | | this case is handled with a recursive call to iconv using a specially-constructed conversion descriptor. the constant 0 was used as the offset for utf-8, since utf-8 appears first in the charmaps table, but the offset used needs to point into the charmap entry, past the name/aliases at the beginning, to the byte identifying the encoding. as a result of this error, junk was produced. instead, call find_charmap so we don't have to hard-code a nontrivial offset. with this change, the code has been tested and found to work in the case of converting the affected hkscs characters to utf-8.
* fix iconv conversion to UTF-32 with implicit (big) endiannessWill Dietz2018-05-091-0/+2
| | | | | | | | | | | maintainer's notes: commit 95c6044e2ae85846330814c4ac5ebf4102dbe02c split UTF-32 and UTF-32BE but neglected to add a case for the former as a destination encoding, resulting in it wrongly being handled by the default case. the intent was that the value of the macro be chosen to encode "big endian" in the low bits, so that no code would be needed, but this was botched; instead, handle it the way UCS2 is handled.
* fix iconv buffer overflow converting to legacy JIS-based encodingsWill Dietz2018-05-091-0/+1
| | | | | | | | | | maintainer's notes: commit a223dbd27ae36fe53f9f67f86caf685b729593fc added the reverse conversions to JIS-based encodings, but omitted the check for remining buffer space in the case where the next character to be written was single-byte, allowing conversion to continue past the end of the destination buffer.
* make linking of thread-start with explicit scheduling conditionalRich Felker2018-05-093-28/+36
| | | | | | | the wrapper start function that performs scheduling operations is unreachable if pthread_attr_setinheritsched is never called, so move it there rather than the pthread_create source file, saving some code size for static-linked programs.
* improve design of thread-start with explicit scheduling attributesRich Felker2018-05-092-23/+39
| | | | | | | | | | | | eliminate the awkward startlock mechanism and corresponding fields of the pthread structure that were only used at startup. instead of having pthread_create perform the scheduling operations and having the new thread wait for them to be completed, start the new thread with a wrapper start function that performs its own scheduling, sending the result code back via a futex. this way the new thread can use storage from the calling thread's stack rather than permanent fields in the pthread structure.
* clean up and reduce size of internal pthread structureRich Felker2018-05-071-7/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | over time the pthread structure has accumulated a lot of cruft taking up size. this commit removes unused fields and packs booleans and other small data more efficiently. changes which would also require changing code are not included at this time. non-volatile booleans are packed as unsigned char bitfield members. the canceldisable and cancelasync fields need volatile qualification due to how they're accessed from the cancellation signal handler and cancellable syscalls called from signal handlers. since volatile bitfield semantics are not clearly defined, discrete char objects are used instead. the pid field is completely removed; it has been unused since commit 83dc6eb087633abcf5608ad651d3b525ca2ec35e. the tid field's type is changed to int because its use is as a value in futexes, which are defined as plain int. it has no conceptual relationship to pid_t. also, its position is not ABI. startlock is reduced to a length-1 array. the second element was presumably intended as a waiter count, but it was never used and made no sense, since there is at most one waiter.
* improve joinable/detached thread state handlingRich Felker2018-05-056-24/+33
| | | | | | | | | | | | | | | | | previously, some accesses to the detached state (from pthread_join and pthread_getattr_np) were unsynchronized; they were harmless in programs with well-defined behavior, but ugly. other accesses (in pthread_exit and pthread_detach) were synchronized by a poorly named "exitlock", with an ad-hoc trylock operation on it open-coded in pthread_detach, whose only purpose was establishing protocol for which thread is responsible for deallocation of detached-thread resources. instead, use an atomic detach_state and unify it with the futex used to wait for thread exit. this eliminates 2 members from the pthread structure, gets rid of the hackish lock usage, and makes rigorous the trap added in commit 80bf5952551c002cf12d96deb145629765272db0 for catching attempts to join detached threads. it should also make attempt to detach an already-detached thread reliably trap.
* improve pthread_exit synchronization with functions targeting tidRich Felker2018-05-056-17/+18
| | | | | | | | | | | | | | | | if the last thread exited via pthread_exit, the logic that marked it dead did not account for the possibility of it targeting itself via atexit handlers. for example, an atexit handler calling pthread_kill(pthread_self(), SIGKILL) would return success (previously, ESRCH) rather than causing termination via the signal. move the release of killlock after the determination is made whether the exiting thread is the last thread. in the case where it's not, move the release all the way to the end of the function. this way we can clear the tid rather than spending storage on a dedicated dead-flag. clearing the tid is also preferable in that it hardens against inadvertent use of the value after the thread has terminated but before it is joined.
* remove incorrect ESRCH error from pthread_killRich Felker2018-05-041-1/+2
| | | | | | | | | | posix documents in the rationale and future directions for pthread_kill that, since the lifetime of the thread id for a joinable thread lasts until it is joined, ESRCH is not a correct error for pthread_kill to produce when the target thread has exited but not yet been joined, and that conforming applications cannot attempt to detect this state. future versions of the standard may explicitly require that ESRCH not be returned for this case.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-05 02:34:36 +0000