about summary refs log tree commit diff
Commit message (Collapse)AuthorAgeFilesLines
* socket.h: fix SO_* for mipsRoman Yeryomin2015-07-213-4/+9
| | | | Signed-off-by: Roman Yeryomin <roman@ubnt.com>
* mips: fix mcontext_t register array field nameFelix Fietkau2015-07-211-1/+1
| | | | | | glibc and uclibc use gregs instead of regs Signed-off-by: Felix Fietkau <nbd@openwrt.org>
* handle loss of syslog socket connectionRich Felker2015-07-091-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | when traditional syslogd implementations are restarted, the old server socket ceases to exist and a new unix socket with the same pathname is created. when this happens, the default destination address associated with the client socket via connect is no longer valid, and attempts to send produce errors. this happens despite the socket being datagram type, and is in contrast to the behavior that would be seen with an IP datagram (UDP) socket. in order to avoid a situation where the application is unable to send further syslog messages without calling closelog, this patch makes syslog attempt to reconnect the socket when send returns an error indicating a lost connection. additionally, initial failure to connect the socket no longer results in the socket being closed. this ensures that an application which calls openlog to reserve the socket file descriptor will not run into a situation where transient connection failure (e.g. due to syslogd restart) prevents fd reservation. however, applications which may be unable to connect the socket later (e.g. due to chroot, restricted permissions, seccomp, etc.) will still fail to log if the syslog socket cannot be connected at openlog time or if it has to be reconnected later.
* fix incorrect void return type for syncfs functionRich Felker2015-07-092-3/+3
| | | | | | being nonstandard, the closest thing to a specification for this function is its man page, which documents it as returning int. it can fail with EBADF if the file descriptor passed is invalid.
* fix negated return value of ns_skiprr, breakage in related functionsRich Felker2015-07-081-1/+1
| | | | | | | | due to a reversed pointer difference computation, ns_skiprr always returned a negative value, which functions using it would interpret as an error. patch by Yu Lu.
* add musl-clang, a wrapper for system clang installsShiz2015-07-065-1/+105
| | | | | | | | | | | | | | musl-clang allows the user to compile musl-powered programs using their already existent clang install, without the need of a special cross compiler. it achieves this by wrapping around both the system clang install and the linker and passing them special flags to re-target musl at runtime. it does only affect invocations done through the special musl-clang wrapper script, so that the user setup remains fully intact otherwise. the clang wrapper consists of the compiler frontend wrapper script, musl-clang, and the linker wrapper script, ld.musl-clang. musl-clang makes sure clang invokes ld.musl-clang to link objects; neither script needs to be in PATH for the wrapper to work.
* build: fix musl-targeting toolchain testShiz2015-07-061-9/+8
| | | | | | | | | | | | | | | the old test was broken in that it would never fail on a toolchains built without dynamic linking support, leading to the wrapper script possibly being installed on compilers that do not support it. in addition, the new test is portable across compilers: the old test only worked on GCC. the new test works by testing whether the toolchain libc defines __GLIBC__: most non-musl Linux libc's do define this for compatibility even when they are not glibc, so this is a safe bet to check for musl. in addition, the compiler runtime would need to have a somewhat glibc-compatible ABI in the first place, so any non-glibc compatible libc's compiler runtime might not work. it is safer to disable these cases by default and have the user enable the wrappers manually there using --enable-wrapper if they certain it works.
* build: overhaul wrapper script system for multiple wrapper supportShiz2015-07-062-21/+39
| | | | | | | | | | | | | | | this overhauls part of the build system in order to support multiple toolchain wrapper scripts, as opposed to solely the musl-gcc wrapper as before. it thereby replaces --enable-gcc-wrapper with --enable-wrapper=..., which has the options 'auto' (the default, detect whether to use wrappers), 'all' (build and install all wrappers), 'no' (don't build any) and finally the options named after the individual compiler scripts (currently only 'gcc' is available) to build and install only that wrapper. the old --enable-gcc-wrapper is removed from --help, but still available. it also modifies the wrappers to use the C compiler specified to the build system as 'inner' compiler, when applicable. as wrapper detection works by probing this compiler, it may not work with any other.
* treat empty TZ environment variable as GMT rather than defaultRich Felker2015-07-061-1/+2
| | | | | | this improves compatibility with the behavior of other systems and with some applications which set an empty TZ var to disable use of local time by mktime, etc.
* dynlink.c: pass gnu-hash table pointer to gnu_lookupAlexander Monakov2015-06-281-13/+11
| | | | | | | | | | The callers need to check the value of the pointer anyway, so make them pass the pointer to gnu_lookup instead of reloading it there. Reorder gnu_lookup arguments so that always-used ones are listed first. GCC can choose a calling convention with arguments in registers (e.g. up to 3 arguments in eax, ecx, edx on x86), but cannot reorder the arguments for static functions.
* dynlink.c: slim down gnu_lookupAlexander Monakov2015-06-281-9/+5
| | | | | Do not reference dso->syms and dso->strings until point of use. Check 'h1 == (h2|1)', the simplest condition, before the others.
* dynlink.c: use bloom filter in gnu hash lookupAlexander Monakov2015-06-281-3/+22
| | | | | | | | Introduce gnu_lookup_filtered and use it to speed up symbol lookups in find_sym (do_dlsym is left as is, based on an expectation that frequently dlsym queries will use a dlopen handle rather than RTLD_NEXT or RTLD_DEFAULT, and will not need to look at more than one DSO).
* dynlink.c: use a faster expression in gnu_hashAlexander Monakov2015-06-271-1/+1
| | | | | With -Os, GCC uses a multiply rather than a shift and addition for 'h*33'. Use a more efficient expression explicitely.
* fix local-dynamic model TLS on mips and powerpcRich Felker2015-06-255-5/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | the TLS ABI spec for mips, powerpc, and some other (presently unsupported) RISC archs has the return value of __tls_get_addr offset by +0x8000 and the result of DTPOFF relocations offset by -0x8000. I had previously assumed this part of the ABI was actually just an implementation detail, since the adjustments cancel out. however, when the local dynamic model is used for accessing TLS that's known to be in the same DSO, either of the following may happen: 1. the -0x8000 offset may already be applied to the argument structure passed to __tls_get_addr at ld time, without any opportunity for runtime relocations. 2. __tls_get_addr may be used with a zero offset argument to obtain a base address for the module's TLS, to which the caller then applies immediate offsets for individual objects accessed using the local dynamic model. since the immediate offsets have the -0x8000 adjustment applied to them, the base address they use needs to include the +0x8000 offset. it would be possible, but more complex, to store the pointers in the dtv[] array with the +0x8000 offset pre-applied, to avoid the runtime cost of adding 0x8000 on each call to __tls_get_addr. this change could be made later if measurements show that it would help.
* make dynamic linker work around MAP_FAILED mmap failure on nommu kernelsRich Felker2015-06-231-2/+24
| | | | | | previously, loading of additional libraries beyond libc/ldso did not work on nommu kernels, nor did loading programs via invocation of the dynamic linker as a command.
* reimplement strverscmp to fix corner casesRich Felker2015-06-231-32/+25
| | | | | | | | | | | | | | | | | this interface is non-standardized and is a GNU invention, and as such, our implementation should match the behavior of the GNU function. one peculiarity the old implementation got wrong was the handling of all-zero digit sequences: they are supposed to compare greater than digit sequences of which they are a proper prefix, as in 009 < 00. in addition, high bytes were treated with char signedness rather than as unsigned. this was wrong regardless of what the GNU function does since the resulting order relation varied by arch. the new strverscmp implementation makes explicit the cases where the order differs from what strcmp would produce, of which there are only two.
* fix regression/typo that disabled __simple_malloc when calloc is usedRich Felker2015-06-221-1/+1
| | | | | | commit ba819787ee93ceae94efd274f7849e317c1bff58 introduced this regression. since the __malloc0 weak alias was not properly provided by __simple_malloc, use of calloc forced the full malloc to be linked.
* fix calloc when __simple_malloc implementation is usedRich Felker2015-06-223-12/+15
| | | | | | | | | | | | | | | | | previously, calloc's implementation encoded assumptions about the implementation of malloc, accessing a size_t word just prior to the allocated memory to determine if it was obtained by mmap to optimize out the zero-filling. when __simple_malloc is used (static linking a program with no realloc/free), it doesn't matter if the result of this check is wrong, since all allocations are zero-initialized anyway. but the access could be invalid if it crosses a page boundary or if the pointer is not sufficiently aligned, which can happen for very small allocations. this patch fixes the issue by moving the zero-fill logic into malloc.c with the full malloc, as a new function named __malloc0, which is provided by a weak alias to __simple_malloc (which always gives zero-filled memory) when the full malloc is not in use.
* provide __stack_chk_fail_local in libc.aRich Felker2015-06-201-0/+4
| | | | | | | | | | | | | | this symbol is needed only on archs where the PLT call ABI is klunky, and only for position-independent code compiled with stack protector. thus references usually only appear in shared libraries or PIE executables, but they can also appear when linking statically if some of the object files being linked were built as PIC/PIE. normally libssp_nonshared.a from the compiler toolchain should provide __stack_chk_fail_local, but reportedly it appears prior to -lc in the link order, thus failing to satisfy references from libc itself (which arise only if libc.a was built as PIC/PIE with stack protector enabled).
* work around mips detached thread exit breakage due to kernel regressionRich Felker2015-06-201-0/+1
| | | | | | | | | linux kernel commit 46e12c07b3b9603c60fc1d421ff18618241cb081 caused the mips syscall mechanism to fail with EFAULT when the userspace stack pointer is invalid, breaking __unmapself used for detached thread exit. the workaround is to set $sp to a known-valid, readable address, and the simplest one to obtain is the address of the current function, which is available (per o32 calling convention) in $25.
* ignore ENOSYS error from mprotect in pthread_create and dynamic linkerRich Felker2015-06-172-3/+6
| | | | | this error simply indicated a system without memory protection (NOMMU) and should not cause failure in the caller.
* switch to using trap number 31 for syscalls on shRich Felker2015-06-168-11/+11
| | | | | | | | | | | | | | | | | | | nominally the low bits of the trap number on sh are the number of syscall arguments, but they have never been used by the kernel, and some code making syscalls does not even know the number of arguments and needs to pass an arbitrary high number anyway. sh3/sh4 traditionally used the trap range 16-31 for syscalls, but part of this range overlapped with hardware exceptions/interrupts on sh2 hardware, so an incompatible range 32-47 was chosen for sh2. using trap number 31 everywhere, since it's in the existing sh3/sh4 range and does not conflict with sh2 hardware, is a proposed unification of the kernel syscall convention that will allow binaries to be shared between sh2 and sh3/sh4. if this is not accepted into the kernel, we can refit the sh2 target with runtime selection mechanisms for the trap number, but doing so would be invasive and would entail non-trivial overhead.
* switch sh port's __unmapself to generic version when running on sh2/nommuRich Felker2015-06-162-3/+22
| | | | | | | | | | | | | due to the way the interrupt and syscall trap mechanism works, userspace on sh2 must never set the stack pointer to an invalid value. thus, the approach used on most archs, where __unmapself executes with no stack for the interval between SYS_munmap and SYS_exit, is not viable on sh2. in order not to pessimize sh3/sh4, the sh asm version of __unmapself is not removed. instead it's renamed and redirected through code that calls either the generic (safe) __unmapself or the sh3/sh4 asm, depending on compile-time and run-time conditions.
* add support for sh2 interrupt-masking-based atomics to sh portRich Felker2015-06-164-14/+113
| | | | | | | | | | | | | | | | | | | the sh2 target is being considered an ISA subset of sh3/sh4, in the sense that binaries built for sh2 are intended to be usable on later cpu models/kernels with mmu support. so rather than hard-coding sh2-specific atomics, the runtime atomic selection mechanisms that was already in place has been extended to add sh2 atomics. at this time, the sh2 atomics are not SMP-compatible; since the ISA lacks actual atomic operations, the new code instead masks interrupts for the duration of the atomic operation, producing an atomic result on single-core. this is only possible because the kernel/hardware does not impose protections against userspace doing so. additional changes will be needed to support future SMP systems. care has been taken to avoid producing significant additional code size in the case where it's known at compile-time that the target is not sh2 and does not need sh2-specific code.
* refactor stdio open file list handling, move it out of global libc structRich Felker2015-06-1612-41/+42
| | | | | | | | | | | | | functions which open in-memory FILE stream variants all shared a tail with __fdopen, adding the FILE structure to stdio's open file list. replacing this common tail with a function call reduces code size and duplication of logic. the list is also partially encapsulated now. function signatures were chosen to facilitate tail call optimization and reduce the need for additional accessor functions. with these changes, static linked programs that do not use stdio no longer have an open file list at all.
* byte-based C locale, phase 3: make MB_CUR_MAX variable to activate codeRich Felker2015-06-162-1/+5
| | | | | | | | this patch activates the new byte-based C locale (high bytes treated as abstract code unit "characters" rather than decoded as multibyte characters) by making the value of MB_CUR_MAX depend on the active locale. for the C locale, the LC_CTYPE category pointer is null, yielding a value of 1. all other locales yield a value of 4.
* byte-based C locale, phase 2: stdio and iconv (multibyte callers)Rich Felker2015-06-167-8/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | this patch adjusts libc components which use the multibyte functions internally, and which depend on them operating in a particular encoding, to make the appropriate locale changes before calling them and restore the calling thread's locale afterwards. activating the byte-based C locale without these changes would cause regressions in stdio and iconv. in the case of iconv, the current implementation was simply using the multibyte functions as UTF-8 conversions. setting a multibyte UTF-8 locale for the duration of the iconv operation allows the code to continue working. in the case of stdio, POSIX requires that FILE streams have an encoding rule bound at the time of setting wide orientation. as long as all locales, including the C locale, used the same encoding, treating high bytes as UTF-8, there was no need to store an encoding rule as part of the stream's state. a new locale field in the FILE structure points to the locale that should be made active during fgetwc/fputwc/ungetwc on the stream. it cannot point to the locale active at the time the stream becomes oriented, because this locale could be mutable (the global locale) or could be destroyed (locale_t objects produced by newlocale) before the stream is closed. instead, a pointer to the static C or C.UTF-8 locale object added in commit commit aeeac9ca5490d7d90fe061ab72da446c01ddf746 is used. this is valid since categories other than LC_CTYPE will not affect these functions.
* byte-based C locale, phase 1: multibyte character handling functionsRich Felker2015-06-1610-7/+53
| | | | | | | | | | | | | | | | | | this patch makes the functions which work directly on multibyte characters treat the high bytes as individual abstract code units rather than as multibyte sequences when MB_CUR_MAX is 1. since MB_CUR_MAX is presently defined as a constant 4, all of the new code added is dead code, and optimizing compilers' code generation should not be affected at all. a future commit will activate the new code. as abstract code units, bytes 0x80 to 0xff are represented by wchar_t values 0xdf80 to 0xdfff, at the end of the surrogates range. this ensures that they will never be misinterpreted as Unicode characters, and that all wctype functions return false for these "characters" without needing locale-specific logic. a high range outside of Unicode such as 0x7fffff80 to 0x7fffffff was also considered, but since C11's char16_t also needs to be able to represent conversions of these bytes, the surrogate range was the natural choice.
* fix btowc corner caseRich Felker2015-06-161-0/+1
| | | | | | | btowc is required to interpret its argument by conversion to unsigned char, unless the argument is equal to EOF. since the conversion to produces a non-character value anyway, we can just unconditionally convert, for now.
* arm: add vdso supportSzabolcs Nagy2015-06-141-0/+4
| | | | | vdso will be available on arm in linux v4.2, the user-space code for it is in kernel commit 8512287a8165592466cb9cb347ba94892e9c56a5
* refactor malloc's expand_heap to share with __simple_mallocRich Felker2015-06-143-81/+126
| | | | | | | | | | | | | | | | | | | this extends the brk/stack collision protection added to full malloc in commit 276904c2f6bde3a31a24ebfa201482601d18b4f9 to also protect the __simple_malloc function used in static-linked programs that don't reference the free function. it also extends support for using mmap when brk fails, which full malloc got in commit 5446303328adf4b4e36d9fba21848e6feb55fab4, to __simple_malloc. since __simple_malloc may expand the heap by arbitrarily large increments, the stack collision detection is enhanced to detect interval overlap rather than just proximity of a single address to the stack. code size is increased a bit, but this is partly offset by the sharing of code between the two malloc implementations, which due to linking semantics, both get linked in a program that needs the full malloc with realloc/free support.
* remove cancellation points in stdioRich Felker2015-06-133-24/+3
| | | | | | | | | | | | | | | | commit 58165923890865a6ac042fafce13f440ee986fd9 added these optional cancellation points on the basis that cancellable stdio could be useful, to unblock threads stuck on stdio operations that will never complete. however, the only way to ensure that cancellation can achieve this is to violate the rules for side effects when cancellation is acted upon, discarding knowledge of any partial data transfer already completed. our implementation exhibited this behavior and was thus non-conforming. in addition to improving correctness, removing these cancellation points moderately reduces code size, and should significantly improve performance on i386, where sysenter/syscall instructions can be used instead of "int $128" for non-cancellable syscalls.
* fix idiom for setting stdio stream orientation to wideRich Felker2015-06-136-6/+6
| | | | | | | | | | | | the old idiom, f->mode |= f->mode+1, was adapted from the idiom for setting byte orientation, f->mode |= f->mode-1, but the adaptation was incorrect. unless the stream was alreasdy set byte-oriented, this code incremented f->mode each time it was executed, which would eventually lead to overflow. it could be fixed by changing it to f->mode |= 1, but upcoming changes will require slightly more work at the time of wide orientation, so it makes sense to just call fwide. as an optimization in the single-character functions, fwide is only called if the stream is not already wide-oriented.
* add printing of null %s arguments as "(null)" in wide printfRich Felker2015-06-131-0/+1
| | | | | this is undefined, but supported in our implementation of the normal printf, so for consistency the wide variant should support it too.
* add %m support to wide printfRich Felker2015-06-131-0/+2
|
* add sh asm for vforkRich Felker2015-06-111-0/+23
|
* implement arch-generic version of __unmapselfRich Felker2015-06-101-0/+29
| | | | | | | | | | | | this can be used to put off writing an asm version of __unmapself for new archs, or as a permanent solution on archs where it's not practical or even possible to run momentarily with no stack. the concept here is simple: the caller takes a lock on a global shared stack and uses it to make the munmap and exit syscalls. the only trick is unlocking, which must be done after the thread exits, and this is achieved by using the set_tid_address syscall to have the kernel zero and futex-wake the lock word as part of the exit syscall.
* in malloc, refuse to use brk if it grows into stackRich Felker2015-06-091-1/+9
| | | | | | | | | | | | | | | | | | | | | | | | the linux/nommu fdpic ELF loader sets up the brk range to overlap entirely with the main thread's stack (but growing from opposite ends), so that the resulting failure mode for malloc is not to return a null pointer but to start returning pointers to memory that overlaps with the caller's stack. needless to say this extremely dangerous and makes brk unusable. since it's non-trivial to detect execution environments that might be affected by this kernel bug, and since the severity of the bug makes any sort of detection that might yield false-negatives unsafe, we instead check the proximity of the brk to the stack pointer each time the brk is to be expanded. both the main thread's stack (where the real known risk lies) and the calling thread's stack are checked. an arbitrary gap distance of 8 MB is imposed, chosen to be larger than linux default main-thread stack reservation sizes and larger than any reasonable stack configuration on nommu. the effeciveness of this patch relies on an assumption that the amount by which the brk is being grown is smaller than the gap limit, which is always true for malloc's use of brk. reliance on this assumption is why the check is being done in malloc-specific code and not in __brk.
* fix spurious errors from pwd/grp functions when nscd backend is absentRich Felker2015-06-091-4/+8
| | | | | | | | | | | for several pwd/grp functions, the only way the caller can distinguish between a successful negative result ("no such user/group") and an internal error is by clearing errno before the call and checking errno afterwards. the nscd backend support code correctly simulated a not-found response on systems where such a backend is not running, but failed to restore errno. this commit also fixed an outdated/incorrect comment.
* fix regression in pre-v7 arm on kernels with kuser helper removedRich Felker2015-06-071-17/+14
| | | | | | | | | | | | | | | the arm atomics/TLS runtime selection code is called from __set_thread_area and depends on having libc.auxv and __hwcap available. commit 71f099cb7db821c51d8f39dfac622c61e54d794c moved the first call to __set_thread_area to the top of dynamic linking stage 3, before this data is made available, causing the runtime detection code to always see __hwcap as zero and thereby select the atomics/TLS implementations based on kuser helper. upcoming work on superh will use similar runtime detection. ideally this early-init code should be cleanly refactored and shared between the dynamic linker and static-linked startup.
* add multiple inclusion guard to locale_impl.hRich Felker2015-06-071-0/+5
|
* remove redefinition of MB_CUR_MAX in locale_impl.hRich Felker2015-06-071-3/+0
| | | | | | | | unless/until the byte-based C locale is implemented, defining MB_CUR_MAX to 1 in the C locale is wrong. no internal code currently uses the MB_CUR_MAX macro, but having it defined inconsistently is error-prone. applications get the value from stdlib.h and were unaffected.
* make static C and C.UTF-8 locales available outside of newlocaleRich Felker2015-06-064-21/+28
|
* remove another invalid skip of locking in ungetwcRich Felker2015-06-061-3/+1
|
* add macro version of ctype.h isascii functionRich Felker2015-06-062-0/+2
| | | | | | presumably internal code (ungetwc and fputwc) was written assuming a macro implementation existed; otherwise use of isascii is just a pessimization.
* remove invalid skip of locking in ungetwcRich Felker2015-06-061-6/+3
| | | | | | aside from being invalid, the early check only optimized the error case, and likely pessimized the common case by separating the two branches on isascii(c) at opposite ends of the function.
* fix uselocale((locale_t)0) not to modify localeTimo Teräs2015-06-051-3/+1
| | | | | commit 68630b55c0c7219fe9df70dc28ffbf9efc8021d8 made the new locale to be assigned unconditonally resulting in crashes later on.
* release 1.1.10 v1.1.10Rich Felker2015-06-042-1/+34
|
* fix dynamic linker regression processing R_*_NONE type relocationsRich Felker2015-06-041-0/+1
| | | | | | | | | | | | | | | commit f3ddd173806fd5c60b3f034528ca24542aecc5b9 inadvertently removed the early check for "none" type relocations, causing the address dso->base+0 to be dereferenced to obtain an addend. shared libraries, (including libc.so) and PIE executables were unaffected, since their base addresses are the actual address of their mappings and are readable. non-PIE main executables, however, have a base address of 0 because their load addresses are absolute and not offset at load time. in practice none-type relocations do not arise with toolchains that are in use except on mips, and on mips it's moderately rare for a non-PIE executable to have a relocation table, since the mips-specific got processing serves in its place for most purposes.
* add additional Makefile dependency rules for rcrt1.o PIE start fileRich Felker2015-06-031-2/+4
|
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-09 08:16:21 +0000