/* memset with unaligned store and rep stosb
   Copyright (C) 2016-2024 Free Software Foundation, Inc.
   This file is part of the GNU C Library.

   The GNU C Library is free software; you can redistribute it and/or
   modify it under the terms of the GNU Lesser General Public
   License as published by the Free Software Foundation; either
   version 2.1 of the License, or (at your option) any later version.

   The GNU C Library is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   Lesser General Public License for more details.

   You should have received a copy of the GNU Lesser General Public
   License along with the GNU C Library; if not, see
   <https://www.gnu.org/licenses/>.  */

/* memset is implemented as:
   1. Use overlapping store to avoid branch.
   2. If size is less than VEC, use integer register stores.
   3. If size is from VEC_SIZE to 2 * VEC_SIZE, use 2 VEC stores.
   4. If size is from 2 * VEC_SIZE to 4 * VEC_SIZE, use 4 VEC stores.
   5. On machines ERMS feature, if size is greater or equal than
      __x86_rep_stosb_threshold then REP STOSB will be used.
   6. If size is more to 4 * VEC_SIZE, align to 4 * VEC_SIZE with
      4 VEC stores and store 4 * VEC at a time until done.  */

#include <sysdep.h>

#ifndef MEMSET_CHK_SYMBOL
# define MEMSET_CHK_SYMBOL(p,s)		MEMSET_SYMBOL(p, s)
#endif

#ifndef WMEMSET_CHK_SYMBOL
# define WMEMSET_CHK_SYMBOL(p,s)	WMEMSET_SYMBOL(p, s)
#endif

#ifndef VZEROUPPER
# if VEC_SIZE > 16
#  define VZEROUPPER			vzeroupper
#  define VZEROUPPER_SHORT_RETURN	vzeroupper; ret
# else
#  define VZEROUPPER
# endif
#endif

#ifndef VZEROUPPER_SHORT_RETURN
# define VZEROUPPER_SHORT_RETURN	rep; ret
#endif

#ifndef MOVQ
# if VEC_SIZE > 16
#  define MOVQ				vmovq
#  define MOVD				vmovd
# else
#  define MOVQ				movq
#  define MOVD				movd
# endif
#endif

#if VEC_SIZE == 64
# define LOOP_4X_OFFSET	(VEC_SIZE * 4)
#else
# define LOOP_4X_OFFSET	(0)
#endif

#if defined USE_WITH_EVEX || defined USE_WITH_AVX512
# define END_REG	rcx
# define LOOP_REG	rdi
# define LESS_VEC_REG	rax
#else
# define END_REG	rdi
# define LOOP_REG	rdx
# define LESS_VEC_REG	rdi
#endif

#ifdef USE_XMM_LESS_VEC
# define XMM_SMALL	1
#else
# define XMM_SMALL	0
#endif

#ifdef USE_LESS_VEC_MASK_STORE
# define SET_REG64	rcx
# define SET_REG32	ecx
# define SET_REG16	cx
# define SET_REG8	cl
#else
# define SET_REG64	rsi
# define SET_REG32	esi
# define SET_REG16	si
# define SET_REG8	sil
#endif

#define PAGE_SIZE 4096

/* Macro to calculate size of small memset block for aligning
   purposes.  */
#define SMALL_MEMSET_ALIGN(mov_sz,	ret_sz)	(2 * (mov_sz) + (ret_sz) + 1)


#ifndef SECTION
# error SECTION is not defined!
#endif

	.section SECTION(.text), "ax", @progbits
#if IS_IN (libc)
# if defined SHARED
ENTRY_CHK (WMEMSET_CHK_SYMBOL (__wmemset_chk, unaligned))
	cmp	%RDX_LP, %RCX_LP
	jb	HIDDEN_JUMPTARGET (__chk_fail)
END_CHK (WMEMSET_CHK_SYMBOL (__wmemset_chk, unaligned))
# endif

ENTRY (WMEMSET_SYMBOL (__wmemset, unaligned))
	shl	$2, %RDX_LP
	WMEMSET_SET_VEC0_AND_SET_RETURN (%esi, %rdi)
	WMEMSET_VDUP_TO_VEC0_LOW()
	cmpq	$VEC_SIZE, %rdx
	jb	L(less_vec_from_wmemset)
	WMEMSET_VDUP_TO_VEC0_HIGH()
	jmp	L(entry_from_wmemset)
END (WMEMSET_SYMBOL (__wmemset, unaligned))
#endif

#if defined SHARED && IS_IN (libc)
ENTRY_CHK (MEMSET_CHK_SYMBOL (__memset_chk, unaligned))
	cmp	%RDX_LP, %RCX_LP
	jb	HIDDEN_JUMPTARGET (__chk_fail)
END_CHK (MEMSET_CHK_SYMBOL (__memset_chk, unaligned))
#endif

ENTRY (MEMSET_SYMBOL (__memset, unaligned))
	MEMSET_SET_VEC0_AND_SET_RETURN (%esi, %rdi)
# ifdef __ILP32__
	/* Clear the upper 32 bits.  */
	mov	%edx, %edx
# endif
	cmpq	$VEC_SIZE, %rdx
	jb	L(less_vec)
	MEMSET_VDUP_TO_VEC0_HIGH()
L(entry_from_wmemset):
	cmpq	$(VEC_SIZE * 2), %rdx
	ja	L(more_2x_vec)
	/* From VEC and to 2 * VEC.  No branch when size == VEC_SIZE.  */
	VMOVU	%VMM(0), -VEC_SIZE(%rdi,%rdx)
	VMOVU	%VMM(0), (%rdi)
	VZEROUPPER_RETURN
#if defined USE_MULTIARCH && IS_IN (libc)
END (MEMSET_SYMBOL (__memset, unaligned))

# if defined SHARED && IS_IN (libc)
ENTRY_CHK (MEMSET_CHK_SYMBOL (__memset_chk, unaligned_erms))
	cmp	%RDX_LP, %RCX_LP
	jb	HIDDEN_JUMPTARGET (__chk_fail)
END_CHK (MEMSET_CHK_SYMBOL (__memset_chk, unaligned_erms))
# endif

ENTRY_P2ALIGN (MEMSET_SYMBOL (__memset, unaligned_erms), 6)
	MEMSET_SET_VEC0_AND_SET_RETURN (%esi, %rdi)
# ifdef __ILP32__
	/* Clear the upper 32 bits.  */
	mov	%edx, %edx
# endif
	cmp	$VEC_SIZE, %RDX_LP
	jb	L(less_vec)
	MEMSET_VDUP_TO_VEC0_HIGH ()
	cmp	$(VEC_SIZE * 2), %RDX_LP
	ja	L(stosb_more_2x_vec)
	/* From VEC and to 2 * VEC.  No branch when size == VEC_SIZE.  */
	VMOVU	%VMM(0), (%rdi)
	VMOVU	%VMM(0), (VEC_SIZE * -1)(%rdi, %rdx)
	VZEROUPPER_RETURN
#endif

	.p2align 4,, 4
L(last_2x_vec):
#ifdef USE_LESS_VEC_MASK_STORE
	VMOVU	%VMM(0), (VEC_SIZE * -2)(%rdi, %rdx)
	VMOVU	%VMM(0), (VEC_SIZE * -1)(%rdi, %rdx)
#else
	VMOVU	%VMM(0), (VEC_SIZE * -2)(%rdi)
	VMOVU	%VMM(0), (VEC_SIZE * -1)(%rdi)
#endif
	VZEROUPPER_RETURN

	/* If have AVX512 mask instructions put L(less_vec) close to
	   entry as it doesn't take much space and is likely a hot target.
	 */
#ifdef USE_LESS_VEC_MASK_STORE
	.p2align 4,, 10
L(less_vec):
L(less_vec_from_wmemset):
	/* Less than 1 VEC.  */
# if VEC_SIZE != 16 && VEC_SIZE != 32 && VEC_SIZE != 64
#  error Unsupported VEC_SIZE!
# endif
	/* Clear high bits from edi. Only keeping bits relevant to page
	   cross check. Note that we are using rax which is set in
	   MEMSET_VDUP_TO_VEC0_AND_SET_RETURN as ptr from here on out.  */
	andl	$(PAGE_SIZE - 1), %edi
	/* Check if VEC_SIZE store cross page. Mask stores suffer
	   serious performance degradation when it has to fault suppress.
	 */
	cmpl	$(PAGE_SIZE - VEC_SIZE), %edi
	/* This is generally considered a cold target.  */
	ja	L(cross_page)
# if VEC_SIZE > 32
	movq	$-1, %rcx
	bzhiq	%rdx, %rcx, %rcx
	kmovq	%rcx, %k1
# else
	movl	$-1, %ecx
	bzhil	%edx, %ecx, %ecx
	kmovd	%ecx, %k1
# endif
	vmovdqu8 %VMM(0), (%rax){%k1}
	VZEROUPPER_RETURN

# if defined USE_MULTIARCH && IS_IN (libc)
	/* Include L(stosb_local) here if including L(less_vec) between
	   L(stosb_more_2x_vec) and ENTRY. This is to cache align the
	   L(stosb_more_2x_vec) target.  */
	.p2align 4,, 10
L(stosb_local):
	movzbl	%sil, %eax
	mov	%RDX_LP, %RCX_LP
	mov	%RDI_LP, %RDX_LP
	rep	stosb
	mov	%RDX_LP, %RAX_LP
	VZEROUPPER_RETURN
# endif
#endif

#if defined USE_MULTIARCH && IS_IN (libc)
	.p2align 4
L(stosb_more_2x_vec):
	cmp	__x86_rep_stosb_threshold(%rip), %RDX_LP
	ja	L(stosb_local)
#endif
	/* Fallthrough goes to L(loop_4x_vec). Tests for memset (2x, 4x]
	   and (4x, 8x] jump to target.  */
L(more_2x_vec):
	/* Store next 2x vec regardless.  */
	VMOVU	%VMM(0), (%rdi)
	VMOVU	%VMM(0), (VEC_SIZE * 1)(%rdi)


	/* Two different methods of setting up pointers / compare. The two
	   methods are based on the fact that EVEX/AVX512 mov instructions take
	   more bytes then AVX2/SSE2 mov instructions. As well that EVEX/AVX512
	   machines also have fast LEA_BID. Both setup and END_REG to avoid complex
	   address mode. For EVEX/AVX512 this saves code size and keeps a few
	   targets in one fetch block. For AVX2/SSE2 this helps prevent AGU
	   bottlenecks.  */
#if !(defined USE_WITH_EVEX || defined USE_WITH_AVX512)
	/* If AVX2/SSE2 compute END_REG (rdi) with ALU.  */
	addq	%rdx, %END_REG
#endif

	cmpq	$(VEC_SIZE * 4), %rdx
	jbe	L(last_2x_vec)


#if defined USE_WITH_EVEX || defined USE_WITH_AVX512
	/* If EVEX/AVX512 compute END_REG - (VEC_SIZE * 4 + LOOP_4X_OFFSET) with
	   LEA_BID.  */

	/* END_REG is rcx for EVEX/AVX512.  */
	leaq	-(VEC_SIZE * 4 + LOOP_4X_OFFSET)(%rdi, %rdx), %END_REG
#endif

	/* Store next 2x vec regardless.  */
	VMOVU	%VMM(0), (VEC_SIZE * 2)(%rax)
	VMOVU	%VMM(0), (VEC_SIZE * 3)(%rax)


#if defined USE_WITH_EVEX || defined USE_WITH_AVX512
	/* If LOOP_4X_OFFSET don't readjust LOOP_REG (rdi), just add
	   extra offset to addresses in loop. Used for AVX512 to save space
	   as no way to get (VEC_SIZE * 4) in imm8.  */
# if LOOP_4X_OFFSET == 0
	subq	$-(VEC_SIZE * 4), %LOOP_REG
# endif
	/* Avoid imm32 compare here to save code size.  */
	cmpq	%rdi, %rcx
#else
	addq	$-(VEC_SIZE * 4), %END_REG
	cmpq	$(VEC_SIZE * 8), %rdx
#endif
	jbe	L(last_4x_vec)
#if !(defined USE_WITH_EVEX || defined USE_WITH_AVX512)
	/* Set LOOP_REG (rdx).  */
	leaq	(VEC_SIZE * 4)(%rax), %LOOP_REG
#endif
	/* Align dst for loop.  */
	andq	$(VEC_SIZE * -1), %LOOP_REG
	.p2align 4
L(loop):
	VMOVA	%VMM(0), LOOP_4X_OFFSET(%LOOP_REG)
	VMOVA	%VMM(0), (VEC_SIZE + LOOP_4X_OFFSET)(%LOOP_REG)
	VMOVA	%VMM(0), (VEC_SIZE * 2 + LOOP_4X_OFFSET)(%LOOP_REG)
	VMOVA	%VMM(0), (VEC_SIZE * 3 + LOOP_4X_OFFSET)(%LOOP_REG)
	subq	$-(VEC_SIZE * 4), %LOOP_REG
	cmpq	%END_REG, %LOOP_REG
	jb	L(loop)
	.p2align 4,, MOV_SIZE
L(last_4x_vec):
	VMOVU	%VMM(0), LOOP_4X_OFFSET(%END_REG)
	VMOVU	%VMM(0), (VEC_SIZE + LOOP_4X_OFFSET)(%END_REG)
	VMOVU	%VMM(0), (VEC_SIZE * 2 + LOOP_4X_OFFSET)(%END_REG)
	VMOVU	%VMM(0), (VEC_SIZE * 3 + LOOP_4X_OFFSET)(%END_REG)
L(return_vzeroupper):
#if VEC_SIZE > 16
	ZERO_UPPER_VEC_REGISTERS_RETURN
#else
	ret
#endif

	.p2align 4,, 10
#ifndef USE_LESS_VEC_MASK_STORE
# if defined USE_MULTIARCH && IS_IN (libc)
	/* If no USE_LESS_VEC_MASK put L(stosb_local) here. Will be in
	   range for 2-byte jump encoding.  */
L(stosb_local):
	movzbl	%sil, %eax
	mov	%RDX_LP, %RCX_LP
	mov	%RDI_LP, %RDX_LP
	rep	stosb
	mov	%RDX_LP, %RAX_LP
	VZEROUPPER_RETURN
# endif
	/* Define L(less_vec) only if not otherwise defined.  */
	.p2align 4
L(less_vec):
	/* Broadcast esi to partial register (i.e VEC_SIZE == 32 broadcast to
	   xmm). This is only does anything for AVX2.  */
	MEMSET_VDUP_TO_VEC0_LOW ()
L(less_vec_from_wmemset):
#endif
L(cross_page):
#if VEC_SIZE > 32
	cmpl	$32, %edx
	jge	L(between_32_63)
#endif
#if VEC_SIZE > 16
	cmpl	$16, %edx
	jge	L(between_16_31)
#endif
#ifndef USE_XMM_LESS_VEC
	MOVQ	%VMM_128(0), %SET_REG64
#endif
	cmpl	$8, %edx
	jge	L(between_8_15)
	cmpl	$4, %edx
	jge	L(between_4_7)
	cmpl	$1, %edx
	jg	L(between_2_3)
	jl	L(between_0_0)
	movb	%SET_REG8, (%LESS_VEC_REG)
L(between_0_0):
	ret

	/* Align small targets only if not doing so would cross a fetch line.
	 */
#if VEC_SIZE > 32
	.p2align 4,, SMALL_MEMSET_ALIGN(MOV_SIZE, RET_SIZE)
	/* From 32 to 63.  No branch when size == 32.  */
L(between_32_63):
	VMOVU	%VMM_256(0), (%LESS_VEC_REG)
	VMOVU	%VMM_256(0), -32(%LESS_VEC_REG, %rdx)
	VZEROUPPER_RETURN
#endif

#if VEC_SIZE >= 32
	.p2align 4,, SMALL_MEMSET_ALIGN(MOV_SIZE, 1)
L(between_16_31):
	/* From 16 to 31.  No branch when size == 16.  */
	VMOVU	%VMM_128(0), (%LESS_VEC_REG)
	VMOVU	%VMM_128(0), -16(%LESS_VEC_REG, %rdx)
	ret
#endif

	/* Move size is 3 for SSE2, EVEX, and AVX512. Move size is 4 for AVX2.
	 */
	.p2align 4,, SMALL_MEMSET_ALIGN(3 + XMM_SMALL, 1)
L(between_8_15):
	/* From 8 to 15.  No branch when size == 8.  */
#ifdef USE_XMM_LESS_VEC
	MOVQ	%VMM_128(0), (%rdi)
	MOVQ	%VMM_128(0), -8(%rdi, %rdx)
#else
	movq	%SET_REG64, (%LESS_VEC_REG)
	movq	%SET_REG64, -8(%LESS_VEC_REG, %rdx)
#endif
	ret

	/* Move size is 2 for SSE2, EVEX, and AVX512. Move size is 4 for AVX2.
	 */
	.p2align 4,, SMALL_MEMSET_ALIGN(2 << XMM_SMALL, 1)
L(between_4_7):
	/* From 4 to 7.  No branch when size == 4.  */
#ifdef USE_XMM_LESS_VEC
	MOVD	%VMM_128(0), (%rdi)
	MOVD	%VMM_128(0), -4(%rdi, %rdx)
#else
	movl	%SET_REG32, (%LESS_VEC_REG)
	movl	%SET_REG32, -4(%LESS_VEC_REG, %rdx)
#endif
	ret

	/* 4 * XMM_SMALL for the third mov for AVX2.  */
	.p2align 4,, 4 * XMM_SMALL + SMALL_MEMSET_ALIGN(3, 1)
L(between_2_3):
	/* From 2 to 3.  No branch when size == 2.  */
#ifdef USE_XMM_LESS_VEC
	movb	%SET_REG8, (%rdi)
	movb	%SET_REG8, 1(%rdi)
	movb	%SET_REG8, -1(%rdi, %rdx)
#else
	movw	%SET_REG16, (%LESS_VEC_REG)
	movb	%SET_REG8, -1(%LESS_VEC_REG, %rdx)
#endif
	ret
END (MEMSET_SYMBOL (__memset, unaligned_erms))