Library Maintenance ******************* How to Install the GNU C Library ================================ Installation of the GNU C library is relatively simple, but usually requires several GNU tools to be installed already. To configure the GNU C library for your system, run the shell script `configure' with `sh'. Use an argument which is the conventional GNU name for your system configuration--for example, `sparc-sun-sunos4.1', for a Sun 4 running SunOS 4.1. *Note Installation: (gcc.info)Installation, for a full description of standard GNU configuration names. If you omit the configuration name, `configure' will try to guess one for you by inspecting the system it is running on. It may or may not be able to come up with a guess, and the its guess might be wrong. `configure' will tell you the canonical name of the chosen configuration before proceeding. Here are some options that you should specify (if appropriate) when you run `configure': `--with-gnu-ld' Use this option if you plan to use GNU `ld' to link programs with the GNU C Library. (We strongly recommend that you do.) This option enables use of features that exist only in GNU `ld'; so if you configure for GNU `ld' you must use GNU `ld' *every time* you link with the GNU C Library, and when building it. `--with-gnu-as' Use this option if you plan to use the GNU assembler, `gas', when building the GNU C Library. On some systems, the library may not build properly if you do *not* use `gas'. `--with-gnu-binutils' This option implies both `--with-gnu-ld' and `--with-gnu-as'. On systems where GNU tools are the system tools, there is no need to specify this option. These include GNU, GNU/Linux, and free BSD systems. `--without-fp' `--nfp' Use this option if your computer lacks hardware floating-point support. `--prefix=DIRECTORY' Install machine-independent data files in subdirectories of `DIRECTORY'. (You can also set this in `configparms'; see below.) `--exec-prefix=DIRECTORY' Install the library and other machine-dependent files in subdirectories of `DIRECTORY'. (You can also set this in `configparms'; see below.) `--enable-shared' `--disable-shared' Enable or disable building of an ELF shared library on systems that support it. The default is to build the shared library on systems using ELF when the GNU `binutils' are available. `--enable-profile' `--disable-profile' Enable or disable building of the profiled C library, `-lc_p'. The default is to build the profiled library. You may wish to disable it if you don't plan to do profiling, because it doubles the build time of compiling just the unprofiled static library. `--enable-omitfp' Enable building a highly-optimized but possibly undebuggable static C library. This causes the normal static and shared (if enabled) C libraries to be compiled with maximal optimization, including the `-fomit-frame-pointer' switch that makes debugging impossible on many machines, and without debugging information (which makes the binaries substantially smaller). An additional static library is compiled with no optimization and full debugging information, and installed as `-lc_g'. `--enable-bounded' `--disable-bounded' Enable or disable building of the C library with support for bounded pointers. To do this one need the enhanced version of the GNU CC with can generate code for bounded pointers. This version of the C library is necessary to run code which is also compiled using the enhanced gcc for debugging purposes. There are two more options: `--with-gmp' `--with-gettext' These options are not of much use for the normal installer of the GNU libc. Only maintainers need this to get automatic updates of the files from these packages in the GNU C library source tree. The simplest way to run `configure' is to do it in the directory that contains the library sources. This prepares to build the library in that very directory. You can prepare to build the library in some other directory by going to that other directory to run `configure'. In order to run configure, you will have to specify a directory for it, like this: mkdir sun4 cd sun4 ../configure sparc-sun-sunos4.1 `configure' looks for the sources in whatever directory you specified for finding `configure' itself. It does not matter where in the file system the source and build directories are--as long as you specify the source directory when you run `configure', you will get the proper results. This feature lets you keep sources and binaries in different directories, and that makes it easy to build the library for several different machines from the same set of sources. Simply create a build directory for each target machine, and run `configure' in that directory specifying the target machine's configuration name. The library has a number of special-purpose configuration parameters. These are defined in the file `Makeconfig'; see the comments in that file for the details. But don't edit the file `Makeconfig' yourself--instead, create a file `configparms' in the directory where you are building the library, and define in that file the parameters you want to specify. `configparms' should *not* be an edited copy of `Makeconfig'; specify only the parameters that you want to override. To see how to set these parameters, find the section of `Makeconfig' that says "These are the configuration variables." Then for each parameter that you want to change, copy the definition from `Makeconfig' to your new `configparms' file, and change the value as appropriate for your system. It is easy to configure the GNU C library for cross-compilation by setting a few variables in `configparms'. Set `CC' to the cross-compiler for the target you configured the library for; it is important to use this same `CC' value when running `configure', like this: `CC=TARGET-gcc configure TARGET'. Set `BUILD_CC' to the compiler to use for for programs run on the build system as part of compiling the library. You may need to set `AR' and `RANLIB' to cross-compiling versions of `ar' and `ranlib' if the native tools are not configured to work with object files for the target you configured for. Some of the machine-dependent code for some machines uses extensions in the GNU C compiler, so you may need to compile the library with GCC. (In fact, all of the existing complete ports require GCC.) To build the library and related programs, type `make'. This will produce a lot of output, some of which may look like errors from `make' (but isn't). Look for error messages from `make' containing `***'. Those indicate that something is really wrong. To build and run some test programs which exercise some of the library facilities, type `make check'. This will produce several files with names like `PROGRAM.out'. To format the `GNU C Library Reference Manual' for printing, type `make dvi'. To install the library and its header files, and the Info files of the manual, type `make install'. This will build things if necessary, before installing them. Recommended Tools to Install the GNU C Library ---------------------------------------------- We recommend installing the following GNU tools before attempting to build the GNU C library: * `make' 3.75 You need the latest version of GNU `make'. Modifying the GNU C Library to work with other `make' programs would be so hard that we recommend you port GNU `make' instead. *Really.* We recommend version GNU `make' version 3.75 or later. * GCC 2.7.2.1 On most platforms, the GNU C library can only be compiled with the GNU C compiler. We recommend GCC version 2.7.2 or later; earlier versions may have problems. * `binutils' 2.7 Using the GNU `binutils' (assembler, linker, and related tools) is preferable when possible, and they are required to build an ELF shared C library. We recommend `binutils' version 2.7 or later; earlier versions are known to have problems or to not support all architectures. Supported Configurations ------------------------ The GNU C Library currently supports configurations that match the following patterns: alpha-ANYTHING-linux alpha-ANYTHING-linuxecoff iX86-ANYTHING-gnu iX86-ANYTHING-linux m68k-ANYTHING-linux mips-ANYTHING-linux sparc-ANYTHING-linux powerpc-ANYTHING-linux Former versions of this library used to support the following configurations but the current status is unknown: alpha-dec-osf1 iX86-ANYTHING-bsd4.3 iX86-ANYTHING-isc2.2 iX86-ANYTHING-isc3.N iX86-ANYTHING-sco3.2 iX86-ANYTHING-sco3.2v4 iX86-ANYTHING-sysv iX86-ANYTHING-sysv4 iX86-force_cpu386-none iX86-sequent-bsd i960-nindy960-none m68k-hp-bsd4.3 m68k-mvme135-none m68k-mvme136-none m68k-sony-newsos3 m68k-sony-newsos4 m68k-sun-sunos4.N mips-dec-ultrix4.N mips-sgi-irix4.N sparc-sun-solaris2.N sparc-sun-sunos4.N Each case of `iX86' can be `i386', `i486', `i586', or `i686'. All of those configurations produce a library that can run on any of these processors. The library will be optimized for the specified processor, but will not use instructions not available on all of them. While no other configurations are supported, there are handy aliases for these few. (These aliases work in other GNU software as well.) decstation hp320-bsd4.3 hp300bsd i486-gnu i586-linux i386-sco i386-sco3.2v4 i386-sequent-dynix i386-svr4 news sun3-sunos4.N sun3 sun4-solaris2.N sun4-sunos5.N sun4-sunos4.N sun4 Reporting Bugs ============== There are probably bugs in the GNU C library. There are certainly errors and omissions in this manual. If you report them, they will get fixed. If you don't, no one will ever know about them and they will remain unfixed for all eternity, if not longer. To report a bug, first you must find it. Hopefully, this will be the hard part. Once you've found a bug, make sure it's really a bug. A good way to do this is to see if the GNU C library behaves the same way some other C library does. If so, probably you are wrong and the libraries are right (but not necessarily). If not, one of the libraries is probably wrong. Once you're sure you've found a bug, try to narrow it down to the smallest test case that reproduces the problem. In the case of a C library, you really only need to narrow it down to one library function call, if possible. This should not be too difficult. The final step when you have a simple test case is to report the bug. When reporting a bug, send your test case, the results you got, the results you expected, what you think the problem might be (if you've thought of anything), your system type, and the version of the GNU C library which you are using. Also include the files `config.status' and `config.make' which are created by running `configure'; they will be in whatever directory was current when you ran `configure'. If you think you have found some way in which the GNU C library does not conform to the ANSI and POSIX standards (*note Standards and Portability::.), that is definitely a bug. Report it! Send bug reports to the Internet address `bug-glibc@prep.ai.mit.edu' or the UUCP path `mit-eddie!prep.ai.mit.edu!bug-glibc'. If you have other problems with installation or use, please report those as well. If you are not sure how a function should behave, and this manual doesn't tell you, that's a bug in the manual. Report that too! If the function's behavior disagrees with the manual, then either the library or the manual has a bug, so report the disagreement. If you find any errors or omissions in this manual, please report them to the Internet address `bug-glibc-manual@prep.ai.mit.edu' or the UUCP path `mit-eddie!prep.ai.mit.edu!bug-glibc-manual'. Adding New Functions ==================== The process of building the library is driven by the makefiles, which make heavy use of special features of GNU `make'. The makefiles are very complex, and you probably don't want to try to understand them. But what they do is fairly straightforward, and only requires that you define a few variables in the right places. The library sources are divided into subdirectories, grouped by topic. The `string' subdirectory has all the string-manipulation functions, `math' has all the mathematical functions, etc. Each subdirectory contains a simple makefile, called `Makefile', which defines a few `make' variables and then includes the global makefile `Rules' with a line like: include ../Rules The basic variables that a subdirectory makefile defines are: `subdir' The name of the subdirectory, for example `stdio'. This variable *must* be defined. `headers' The names of the header files in this section of the library, such as `stdio.h'. `routines' `aux' The names of the modules (source files) in this section of the library. These should be simple names, such as `strlen' (rather than complete file names, such as `strlen.c'). Use `routines' for modules that define functions in the library, and `aux' for auxiliary modules containing things like data definitions. But the values of `routines' and `aux' are just concatenated, so there really is no practical difference. `tests' The names of test programs for this section of the library. These should be simple names, such as `tester' (rather than complete file names, such as `tester.c'). `make tests' will build and run all the test programs. If a test program needs input, put the test data in a file called `TEST-PROGRAM.input'; it will be given to the test program on its standard input. If a test program wants to be run with arguments, put the arguments (all on a single line) in a file called `TEST-PROGRAM.args'. Test programs should exit with zero status when the test passes, and nonzero status when the test indicates a bug in the library or error in building. `others' The names of "other" programs associated with this section of the library. These are programs which are not tests per se, but are other small programs included with the library. They are built by `make others'. `install-lib' `install-data' `install' Files to be installed by `make install'. Files listed in `install-lib' are installed in the directory specified by `libdir' in `configparms' or `Makeconfig' (*note Installation::.). Files listed in `install-data' are installed in the directory specified by `datadir' in `configparms' or `Makeconfig'. Files listed in `install' are installed in the directory specified by `bindir' in `configparms' or `Makeconfig'. `distribute' Other files from this subdirectory which should be put into a distribution tar file. You need not list here the makefile itself or the source and header files listed in the other standard variables. Only define `distribute' if there are files used in an unusual way that should go into the distribution. `generated' Files which are generated by `Makefile' in this subdirectory. These files will be removed by `make clean', and they will never go into a distribution. `extra-objs' Extra object files which are built by `Makefile' in this subdirectory. This should be a list of file names like `foo.o'; the files will actually be found in whatever directory object files are being built in. These files will be removed by `make clean'. This variable is used for secondary object files needed to build `others' or `tests'. Porting the GNU C Library ========================= The GNU C library is written to be easily portable to a variety of machines and operating systems. Machine- and operating system-dependent functions are well separated to make it easy to add implementations for new machines or operating systems. This section describes the layout of the library source tree and explains the mechanisms used to select machine-dependent code to use. All the machine-dependent and operating system-dependent files in the library are in the subdirectory `sysdeps' under the top-level library source directory. This directory contains a hierarchy of subdirectories (*note Hierarchy Conventions::.). Each subdirectory of `sysdeps' contains source files for a particular machine or operating system, or for a class of machine or operating system (for example, systems by a particular vendor, or all machines that use IEEE 754 floating-point format). A configuration specifies an ordered list of these subdirectories. Each subdirectory implicitly appends its parent directory to the list. For example, specifying the list `unix/bsd/vax' is equivalent to specifying the list `unix/bsd/vax unix/bsd unix'. A subdirectory can also specify that it implies other subdirectories which are not directly above it in the directory hierarchy. If the file `Implies' exists in a subdirectory, it lists other subdirectories of `sysdeps' which are appended to the list, appearing after the subdirectory containing the `Implies' file. Lines in an `Implies' file that begin with a `#' character are ignored as comments. For example, `unix/bsd/Implies' contains: # BSD has Internet-related things. unix/inet and `unix/Implies' contains: posix So the final list is `unix/bsd/vax unix/bsd unix/inet unix posix'. `sysdeps' has two "special" subdirectories, called `generic' and `stub'. These two are always implicitly appended to the list of subdirectories (in that order), so you needn't put them in an `Implies' file, and you should not create any subdirectories under them intended to be new specific categories. `generic' is for things that can be implemented in machine-independent C, using only other machine-independent functions in the C library. `stub' is for "stub" versions of functions which cannot be implemented on a particular machine or operating system. The stub functions always return an error, and set `errno' to `ENOSYS' (Function not implemented). *Note Error Reporting::. A source file is known to be system-dependent by its having a version in `generic' or `stub'; every generally-available function whose implementation is system-dependent in should have either a generic or stub implementation (there is no point in having both). Some rare functions are only useful on specific systems and aren't defined at all on others; these do not appear anywhere in the system-independent source code or makefiles (including the `generic' and `stub' directories), only in the system-dependent `Makefile' in the specific system's subdirectory. If you come across a file that is in one of the main source directories (`string', `stdio', etc.), and you want to write a machine- or operating system-dependent version of it, move the file into `sysdeps/generic' and write your new implementation in the appropriate system-specific subdirectory. Note that if a file is to be system-dependent, it *must not* appear in one of the main source directories. There are a few special files that may exist in each subdirectory of `sysdeps': `Makefile' A makefile for this machine or operating system, or class of machine or operating system. This file is included by the library makefile `Makerules', which is used by the top-level makefile and the subdirectory makefiles. It can change the variables set in the including makefile or add new rules. It can use GNU `make' conditional directives based on the variable `subdir' (see above) to select different sets of variables and rules for different sections of the library. It can also set the `make' variable `sysdep-routines', to specify extra modules to be included in the library. You should use `sysdep-routines' rather than adding modules to `routines' because the latter is used in determining what to distribute for each subdirectory of the main source tree. Each makefile in a subdirectory in the ordered list of subdirectories to be searched is included in order. Since several system-dependent makefiles may be included, each should append to `sysdep-routines' rather than simply setting it: sysdep-routines := $(sysdep-routines) foo bar `Subdirs' This file contains the names of new whole subdirectories under the top-level library source tree that should be included for this system. These subdirectories are treated just like the system-independent subdirectories in the library source tree, such as `stdio' and `math'. Use this when there are completely new sets of functions and header files that should go into the library for the system this subdirectory of `sysdeps' implements. For example, `sysdeps/unix/inet/Subdirs' contains `inet'; the `inet' directory contains various network-oriented operations which only make sense to put in the library on systems that support the Internet. `Dist' This file contains the names of files (relative to the subdirectory of `sysdeps' in which it appears) which should be included in the distribution. List any new files used by rules in the `Makefile' in the same directory, or header files used by the source files in that directory. You don't need to list files that are implementations (either C or assembly source) of routines whose names are given in the machine-independent makefiles in the main source tree. `configure' This file is a shell script fragment to be run at configuration time. The top-level `configure' script uses the shell `.' command to read the `configure' file in each system-dependent directory chosen, in order. The `configure' files are often generated from `configure.in' files using Autoconf. A system-dependent `configure' script will usually add things to the shell variables `DEFS' and `config_vars'; see the top-level `configure' script for details. The script can check for `--with-PACKAGE' options that were passed to the top-level `configure'. For an option `--with-PACKAGE=VALUE' `configure' sets the shell variable `with_PACKAGE' (with any dashes in PACKAGE converted to underscores) to VALUE; if the option is just `--with-PACKAGE' (no argument), then it sets `with_PACKAGE' to `yes'. `configure.in' This file is an Autoconf input fragment to be processed into the file `configure' in this subdirectory. *Note Introduction: (autoconf.info)Introduction, for a description of Autoconf. You should write either `configure' or `configure.in', but not both. The first line of `configure.in' should invoke the `m4' macro `GLIBC_PROVIDES'. This macro does several `AC_PROVIDE' calls for Autoconf macros which are used by the top-level `configure' script; without this, those macros might be invoked again unnecessarily by Autoconf. That is the general system for how system-dependencies are isolated. Layout of the `sysdeps' Directory Hierarchy ------------------------------------------- A GNU configuration name has three parts: the CPU type, the manufacturer's name, and the operating system. `configure' uses these to pick the list of system-dependent directories to look for. If the `--nfp' option is *not* passed to `configure', the directory `MACHINE/fpu' is also used. The operating system often has a "base operating system"; for example, if the operating system is `sunos4.1', the base operating system is `unix/bsd'. The algorithm used to pick the list of directories is simple: `configure' makes a list of the base operating system, manufacturer, CPU type, and operating system, in that order. It then concatenates all these together with slashes in between, to produce a directory name; for example, the configuration `sparc-sun-sunos4.1' results in `unix/bsd/sun/sparc/sunos4.1'. `configure' then tries removing each element of the list in turn, so `unix/bsd/sparc' and `sun/sparc' are also tried, among others. Since the precise version number of the operating system is often not important, and it would be very inconvenient, for example, to have identical `sunos4.1.1' and `sunos4.1.2' directories, `configure' tries successively less specific operating system names by removing trailing suffixes starting with a period. As an example, here is the complete list of directories that would be tried for the configuration `sparc-sun-sunos4.1' (without the `--nfp' option): sparc/fpu unix/bsd/sun/sunos4.1/sparc unix/bsd/sun/sunos4.1 unix/bsd/sun/sunos4/sparc unix/bsd/sun/sunos4 unix/bsd/sun/sunos/sparc unix/bsd/sun/sunos unix/bsd/sun/sparc unix/bsd/sun unix/bsd/sunos4.1/sparc unix/bsd/sunos4.1 unix/bsd/sunos4/sparc unix/bsd/sunos4 unix/bsd/sunos/sparc unix/bsd/sunos unix/bsd/sparc unix/bsd unix/sun/sunos4.1/sparc unix/sun/sunos4.1 unix/sun/sunos4/sparc unix/sun/sunos4 unix/sun/sunos/sparc unix/sun/sunos unix/sun/sparc unix/sun unix/sunos4.1/sparc unix/sunos4.1 unix/sunos4/sparc unix/sunos4 unix/sunos/sparc unix/sunos unix/sparc unix sun/sunos4.1/sparc sun/sunos4.1 sun/sunos4/sparc sun/sunos4 sun/sunos/sparc sun/sunos sun/sparc sun sunos4.1/sparc sunos4.1 sunos4/sparc sunos4 sunos/sparc sunos sparc Different machine architectures are conventionally subdirectories at the top level of the `sysdeps' directory tree. For example, `sysdeps/sparc' and `sysdeps/m68k'. These contain files specific to those machine architectures, but not specific to any particular operating system. There might be subdirectories for specializations of those architectures, such as `sysdeps/m68k/68020'. Code which is specific to the floating-point coprocessor used with a particular machine should go in `sysdeps/MACHINE/fpu'. There are a few directories at the top level of the `sysdeps' hierarchy that are not for particular machine architectures. `generic' `stub' As described above (*note Porting::.), these are the two subdirectories that every configuration implicitly uses after all others. `ieee754' This directory is for code using the IEEE 754 floating-point format, where the C type `float' is IEEE 754 single-precision format, and `double' is IEEE 754 double-precision format. Usually this directory is referred to in the `Implies' file in a machine architecture-specific directory, such as `m68k/Implies'. `posix' This directory contains implementations of things in the library in terms of POSIX.1 functions. This includes some of the POSIX.1 functions themselves. Of course, POSIX.1 cannot be completely implemented in terms of itself, so a configuration using just `posix' cannot be complete. `unix' This is the directory for Unix-like things. *Note Porting to Unix::. `unix' implies `posix'. There are some special-purpose subdirectories of `unix': `unix/common' This directory is for things common to both BSD and System V release 4. Both `unix/bsd' and `unix/sysv/sysv4' imply `unix/common'. `unix/inet' This directory is for `socket' and related functions on Unix systems. The `inet' top-level subdirectory is enabled by `unix/inet/Subdirs'. `unix/common' implies `unix/inet'. `mach' This is the directory for things based on the Mach microkernel from CMU (including the GNU operating system). Other basic operating systems (VMS, for example) would have their own directories at the top level of the `sysdeps' hierarchy, parallel to `unix' and `mach'. Porting the GNU C Library to Unix Systems ----------------------------------------- Most Unix systems are fundamentally very similar. There are variations between different machines, and variations in what facilities are provided by the kernel. But the interface to the operating system facilities is, for the most part, pretty uniform and simple. The code for Unix systems is in the directory `unix', at the top level of the `sysdeps' hierarchy. This directory contains subdirectories (and subdirectory trees) for various Unix variants. The functions which are system calls in most Unix systems are automatically generated from the `syscalls.list' files for the appropriate archirecture. The format of the syscalls.list files is quite easy: only a few informations are necessary line the system call name, the number of arguments and such. The files are run through the C preprocessor. These files all use a set of macros that should be defined in `sysdep.h'. The `sysdep.h' file in `sysdeps/unix' partially defines them; a `sysdep.h' file in another directory must finish defining them for the particular machine and operating system variant. See `sysdeps/unix/sysdep.h' and the machine-specific `sysdep.h' implementations to see what these macros are and what they should do. The system-specific makefile for the `unix' directory (that is, the file `sysdeps/unix/Makefile') gives rules to generate several files from the Unix system you are building the library on (which is assumed to be the target system you are building the library *for*). All the generated files are put in the directory where the object files are kept; they should not affect the source tree itself. The files generated are `ioctls.h', `errnos.h', `sys/param.h', and `errlist.c' (for the `stdio' section of the library). Contributors to the GNU C Library ================================= The GNU C library was written originally by Roland McGrath. Some parts of the library were contributed or worked on by other people. * The `getopt' function and related code were written by Richard Stallman, David J. MacKenzie, and Roland McGrath. * The merge sort function `qsort' was written by Michael J. Haertel. * The quick sort function used as a fallback by `qsort' was written by Douglas C. Schmidt. * The memory allocation functions `malloc', `realloc' and `free' and related code were written by Michael J. Haertel. * Fast implementations of many of the string functions (`memcpy', `strlen', etc.) were written by Torbjorn Granlund. * The `tar.h' header file was written by David J. MacKenzie. * The port to the MIPS DECStation running Ultrix 4 (`mips-dec-ultrix4') was contributed by Brendan Kehoe and Ian Lance Taylor. * The DES encryption function `crypt' and related functions were contributed by Michael Glad. * The `ftw' function was contributed by Ian Lance Taylor. * The startup code to support SunOS shared libraries was contributed by Tom Quinn. * The `mktime' function was contributed by Paul Eggert. * The port to the Sequent Symmetry running Dynix version 3 (`i386-sequent-bsd') was contributed by Jason Merrill. * The timezone support code is derived from the public-domain timezone package by Arthur David Olson and his many contributors. * The port to the DEC Alpha running OSF/1 (`alpha-dec-osf1') was contributed by Brendan Kehoe, using some code written by Roland McGrath. * The port to SGI machines running Irix 4 (`mips-sgi-irix4') was contributed by Tom Quinn. * The port of the Mach and Hurd code to the MIPS architecture (`mips-ANYTHING-gnu') was contributed by Kazumoto Kojima. * The floating-point printing function used by `printf' and friends and the floating-point reading function used by `scanf', `strtod' and friends were written by Ulrich Drepper. The multi-precision integer functions used in those functions are taken from GNU MP, which was contributed by Torbjorn Granlund. * The internationalization support in the library, and the support programs `locale' and `localedef', were written by Ulrich Drepper. Ulrich Drepper adapted the support code for message catalogs (`libintl.h', etc.) from the GNU `gettext' package, which he also wrote. He also contributed the `catgets' support and the entire suite of multi-byte and wide-character support functions (`wctype.h', `wchar.h', etc.). * The implementations of the `nsswitch.conf' mechanism and the files and DNS backends for it were designed and written by Ulrich Drepper and Roland McGrath, based on a backend interface defined by Peter Eriksson. * The port to Linux i386/ELF (`i386-ANYTHING-linux') was contributed by Ulrich Drepper, based in large part on work done in Hongjiu Lu's Linux version of the GNU C Library. * The port to Linux/m68k (`m68k-ANYTHING-linux') was contributed by Andreas Schwab. * Richard Henderson contributed the ELF dynamic linking code and other support for the Alpha processor. * David Mosberger-Tang contributed the port to Linux/Alpha (`alpha-ANYTHING-linux'). * Stephen R. van den Berg contributed a highly-optimized `strstr' function. * Ulrich Drepper contributed the `hsearch' and `drand48' families of functions; reentrant `...`_r'' versions of the `random' family; System V shared memory and IPC support code; and several highly-optimized string functions for iX86 processors. * The math functions are taken from `fdlibm-5.1' by Sun Microsystems, as modified by J.T. Conklin, Ian Lance Taylor, Ulrich Drepper, Andreas Schwab, and Roland McGrath. * The `libio' library used to implement `stdio' functions on some platforms was written by Per Bothner and modified by Ulrich Drepper. * Some of the Internet-related code (most of the `inet' subdirectory) and several other miscellaneous functions and header files have been included from 4.4 BSD with little or no modification. All code incorporated from 4.4 BSD is under the following copyright: Copyright (C) 1991 Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. 3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors. 4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * The random number generation functions `random', `srandom', `setstate' and `initstate', which are also the basis for the `rand' and `srand' functions, were written by Earl T. Cohen for the University of California at Berkeley and are copyrighted by the Regents of the University of California. They have undergone minor changes to fit into the GNU C library and to fit the ANSI C standard, but the functional code is Berkeley's. * The Internet resolver code is taken directly from BIND 4.9.5, which is under both the Berkeley copyright above and also: Portions Copyright (C) 1993 by Digital Equipment Corporation. Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies, and that the name of Digital Equipment Corporation not be used in advertising or publicity pertaining to distribution of the document or software without specific, written prior permission. THE SOFTWARE IS PROVIDED "AS IS" AND DIGITAL EQUIPMENT CORP. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL DIGITAL EQUIPMENT CORPORATION BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. * The code to support Sun RPC is taken verbatim from Sun's RPCSRC-4.0 distribution, and is covered by this copyright: Copyright (C) 1984, Sun Microsystems, Inc. Sun RPC is a product of Sun Microsystems, Inc. and is provided for unrestricted use provided that this legend is included on all tape media and as a part of the software program in whole or part. Users may copy or modify Sun RPC without charge, but are not authorized to license or distribute it to anyone else except as part of a product or program developed by the user. SUN RPC IS PROVIDED AS IS WITH NO WARRANTIES OF ANY KIND INCLUDING THE WARRANTIES OF DESIGN, MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE, OR ARISING FROM A COURSE OF DEALING, USAGE OR TRADE PRACTICE. Sun RPC is provided with no support and without any obligation on the part of Sun Microsystems, Inc. to assist in its use, correction, modification or enhancement. SUN MICROSYSTEMS, INC. SHALL HAVE NO LIABILITY WITH RESPECT TO THE INFRINGEMENT OF COPYRIGHTS, TRADE SECRETS OR ANY PATENTS BY SUN RPC OR ANY PART THEREOF. In no event will Sun Microsystems, Inc. be liable for any lost revenue or profits or other special, indirect and consequential damages, even if Sun has been advised of the possibility of such damages. Sun Microsystems, Inc. 2550 Garcia Avenue Mountain View, California 94043 * Some of the support code for Mach is taken from Mach 3.0 by CMU, and is under the following copyright terms: Mach Operating System Copyright (C) 1991,1990,1989 Carnegie Mellon University All Rights Reserved. Permission to use, copy, modify and distribute this software and its documentation is hereby granted, provided that both the copyright notice and this permission notice appear in all copies of the software, derivative works or modified versions, and any portions thereof, and that both notices appear in supporting documentation. CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN ITS "AS IS" CONDITION. CARNEGIE MELLON DISCLAIMS ANY LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER RESULTING FROM THE USE OF THIS SOFTWARE. Carnegie Mellon requests users of this software to return to Software Distribution Coordinator School of Computer Science Carnegie Mellon University Pittsburgh PA 15213-3890 or `Software.Distribution@CS.CMU.EDU' any improvements or extensions that they make and grant Carnegie Mellon the rights to redistribute these changes. * The `getaddrinfo' function is written by Craig Metz and it has the following copyright: The Inner Net License, Version 2.00 =================================== The author(s) grant permission for redistribution and use in source and binary forms, with or without modification, of the software and documentation provided that the following conditions are met: 0. If you receive a version of the software that is specifically labelled as not being for redistribution (check the version message and/or README), you are not permitted to redistribute that version of the software in any way or form. 1. All terms of the all other applicable copyrights and licenses must be followed. 2. Redistributions of source code must retain the authors' copyright notice(s), this list of conditions, and the following disclaimer. 3. Redistributions in binary form must reproduce the authors' copyright notice(s), this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution. 4. All advertising materials mentioning features or use of this software must display the following acknowledgement with the name(s) of the authors as specified in the copyright notice(s) substituted where indicated: This product includes software developed by <name(s)>, The Inner Net, and other contributors. 5. Neither the name(s) of the author(s) nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY ITS AUTHORS AND CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. If these license terms cause you a real problem, contact the author.