From 0ffaa7be6ea3649f883248f41a2bea5065383976 Mon Sep 17 00:00:00 2001 From: Carlos O'Donell Date: Tue, 4 Aug 2020 20:31:51 -0400 Subject: Update translations. Incorporate updates from translationproject.org. --- po/ja.po | 1287 +++++++++++++++++++++++--------------------------------------- 1 file changed, 484 insertions(+), 803 deletions(-) (limited to 'po/ja.po') diff --git a/po/ja.po b/po/ja.po index aaf51d8a4f..06be642493 100644 --- a/po/ja.po +++ b/po/ja.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: libc 2.14\n" -"POT-Creation-Date: 2020-01-02 20:08+0530\n" +"POT-Creation-Date: 2020-07-22 23:24-0400\n" "PO-Revision-Date: 2011-10-08 23:43+0900\n" "Last-Translator: Yasuaki Taniguchi \n" "Language-Team: Japanese \n" @@ -69,7 +69,8 @@ msgid "Give a short usage message" msgstr "短い使用方法を表示する" #: argp/argp-parse.c:103 catgets/gencat.c:109 catgets/gencat.c:113 -#: iconv/iconv_prog.c:60 iconv/iconv_prog.c:61 nscd/nscd.c:105 nss/makedb.c:120 +#: iconv/iconv_prog.c:61 iconv/iconv_prog.c:62 nscd/nscd.c:107 nscd/nscd.c:111 +#: nss/makedb.c:120 msgid "NAME" msgstr "NAME" @@ -140,11 +141,11 @@ msgstr "" "[OUTPUT-FILE [INPUT-FILE]...]" #: catgets/gencat.c:245 debug/pcprofiledump.c:225 debug/xtrace.sh:64 -#: elf/ldconfig.c:324 elf/ldd.bash.in:38 elf/pldd.c:263 elf/sotruss.sh:75 -#: elf/sprof.c:389 iconv/iconv_prog.c:422 iconv/iconvconfig.c:396 -#: locale/programs/locale.c:293 locale/programs/localedef.c:463 +#: elf/ldconfig.c:322 elf/ldd.bash.in:38 elf/pldd.c:263 elf/sotruss.sh:75 +#: elf/sprof.c:389 iconv/iconv_prog.c:405 iconv/iconvconfig.c:396 +#: locale/programs/locale.c:293 locale/programs/localedef.c:460 #: login/programs/pt_chown.c:63 malloc/memusage.sh:71 malloc/memusagestat.c:581 -#: nscd/nscd.c:509 nss/getent.c:88 nss/makedb.c:385 posix/getconf.c:485 +#: nscd/nscd.c:522 nss/getent.c:88 nss/makedb.c:385 posix/getconf.c:485 #: sysdeps/unix/sysv/linux/lddlibc4.c:68 #, c-format msgid "" @@ -157,10 +158,10 @@ msgstr "" "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.\n" #: catgets/gencat.c:250 debug/pcprofiledump.c:230 debug/xtrace.sh:68 -#: elf/ldconfig.c:329 elf/pldd.c:268 elf/sprof.c:395 iconv/iconv_prog.c:427 +#: elf/ldconfig.c:327 elf/pldd.c:268 elf/sprof.c:395 iconv/iconv_prog.c:410 #: iconv/iconvconfig.c:401 locale/programs/locale.c:298 -#: locale/programs/localedef.c:468 malloc/memusage.sh:75 -#: malloc/memusagestat.c:586 nscd/nscd.c:514 nss/getent.c:93 nss/makedb.c:390 +#: locale/programs/localedef.c:465 malloc/memusage.sh:75 +#: malloc/memusagestat.c:586 nscd/nscd.c:527 nss/getent.c:93 nss/makedb.c:390 #: posix/getconf.c:490 #, c-format msgid "Written by %s.\n" @@ -170,7 +171,7 @@ msgstr "作者 %s。\n" msgid "*standard input*" msgstr "*標準入力*" -#: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:290 +#: catgets/gencat.c:287 iconv/iconv_charmap.c:167 iconv/iconv_prog.c:273 #: nss/makedb.c:246 #, c-format msgid "cannot open input file `%s'" @@ -362,7 +363,7 @@ msgstr "不明な OS です" msgid ", OS ABI: %s %d.%d.%d" msgstr ", OS ABI: %s %d.%d.%d" -#: elf/cache.c:163 elf/ldconfig.c:1334 +#: elf/cache.c:163 elf/ldconfig.c:1297 #, c-format msgid "Can't open cache file %s\n" msgstr "キャッシュファイル %s を開けません\n" @@ -403,11 +404,11 @@ msgstr "%s のアクセス権限を %#o へ変更するのに失敗しました" msgid "Renaming of %s to %s failed" msgstr "%s から %s への名前変更に失敗しました" -#: elf/dl-close.c:406 elf/dl-open.c:285 +#: elf/dl-close.c:406 elf/dl-open.c:293 msgid "cannot create scope list" msgstr "スコープリストを作成できません" -#: elf/dl-close.c:852 +#: elf/dl-close.c:862 msgid "shared object not open" msgstr "共有オブジェクトが開けません" @@ -428,11 +429,11 @@ msgstr "動的ロードに際し空文字トークンによる置換えを行っ msgid "cannot allocate dependency list" msgstr "依存リストを配置出来ません" -#: elf/dl-deps.c:483 elf/dl-deps.c:543 +#: elf/dl-deps.c:483 elf/dl-deps.c:548 msgid "cannot allocate symbol search list" msgstr "シンボル探索リストを配置出来ません" -#: elf/dl-deps.c:523 +#: elf/dl-deps.c:528 msgid "Filters not supported with LD_TRACE_PRELINKING" msgstr "LD_TRACE_PRELINKINGでフィルタがサポートされていません" @@ -456,135 +457,135 @@ msgstr "ファイルポインタ (fptr) 表用のページをマップできま msgid "internal error: symidx out of range of fptr table" msgstr "内部エラー: ファイルポインタ (fptr) 表のシンボル索引が範囲外です" -#: elf/dl-hwcaps.c:202 elf/dl-hwcaps.c:214 +#: elf/dl-hwcaps.c:92 elf/dl-hwcaps.c:104 msgid "cannot create capability list" msgstr "権限リストを作成できません" -#: elf/dl-load.c:427 +#: elf/dl-load.c:428 msgid "cannot allocate name record" msgstr "名前レコードを配置できません" -#: elf/dl-load.c:513 elf/dl-load.c:626 elf/dl-load.c:715 elf/dl-load.c:811 +#: elf/dl-load.c:514 elf/dl-load.c:627 elf/dl-load.c:716 elf/dl-load.c:812 msgid "cannot create cache for search path" msgstr "探索パス用のキャッシュを作成できません" -#: elf/dl-load.c:609 +#: elf/dl-load.c:610 msgid "cannot create RUNPATH/RPATH copy" msgstr "RUNPATH/RPATH のコピーを作成できません" -#: elf/dl-load.c:702 +#: elf/dl-load.c:703 msgid "cannot create search path array" msgstr "探索パス配列を作成できません" -#: elf/dl-load.c:892 +#: elf/dl-load.c:964 msgid "cannot stat shared object" msgstr "共有オブジェクトの状態取得 (stat) ができません" -#: elf/dl-load.c:1003 elf/dl-load.c:2191 +#: elf/dl-load.c:1075 elf/dl-load.c:2278 msgid "cannot create shared object descriptor" msgstr "共有オブジェクト記述子を作成できません" -#: elf/dl-load.c:1022 elf/dl-load.c:1571 elf/dl-load.c:1672 +#: elf/dl-load.c:1094 elf/dl-load.c:1658 elf/dl-load.c:1759 msgid "cannot read file data" msgstr "ファイルデータを読み込めません" -#: elf/dl-load.c:1068 +#: elf/dl-load.c:1140 msgid "ELF load command alignment not page-aligned" msgstr "ELF ロードコマンド整列がページで整列されていません" -#: elf/dl-load.c:1075 +#: elf/dl-load.c:1147 msgid "ELF load command address/offset not properly aligned" msgstr "ELF ロードコマンドのアドレス/オフセットが適切に整列されていません" -#: elf/dl-load.c:1162 +#: elf/dl-load.c:1226 msgid "object file has no loadable segments" msgstr "オブジェクトファイルはロード可能セグメントを持っていません" -#: elf/dl-load.c:1175 +#: elf/dl-load.c:1239 msgid "cannot dynamically load executable" msgstr "実行ファイルを動的にロードできません" -#: elf/dl-load.c:1196 +#: elf/dl-load.c:1275 msgid "object file has no dynamic section" msgstr "オブジェクトファイルは動的セクションを持っていません" -#: elf/dl-load.c:1225 +#: elf/dl-load.c:1304 msgid "shared object cannot be dlopen()ed" msgstr "共有オブジェクトは dlopen() できません" -#: elf/dl-load.c:1238 +#: elf/dl-load.c:1317 msgid "cannot allocate memory for program header" msgstr "プログラムヘッダー用のメモリを配置できません" -#: elf/dl-load.c:1271 elf/dl-load.h:130 +#: elf/dl-load.c:1350 elf/dl-load.h:130 msgid "cannot change memory protections" msgstr "メモリ保護を変更できません" -#: elf/dl-load.c:1291 +#: elf/dl-load.c:1370 msgid "cannot enable executable stack as shared object requires" msgstr "共有オブジェクトが必要としている実行可能スタックを有効にできません" -#: elf/dl-load.c:1304 +#: elf/dl-load.c:1383 msgid "cannot close file descriptor" msgstr "ファイル記述子を閉じられません" -#: elf/dl-load.c:1571 +#: elf/dl-load.c:1658 msgid "file too short" msgstr "ファイルが小さすぎます" -#: elf/dl-load.c:1606 +#: elf/dl-load.c:1693 msgid "invalid ELF header" msgstr "無効な ELF ヘッダーです" -#: elf/dl-load.c:1618 +#: elf/dl-load.c:1705 msgid "ELF file data encoding not big-endian" msgstr "ELF ファイルデータのエンコーディングがビッグエンディアンではありません" -#: elf/dl-load.c:1620 +#: elf/dl-load.c:1707 msgid "ELF file data encoding not little-endian" msgstr "ELF ファイルデータのエンコーディングがリトルエンディアンではありません" -#: elf/dl-load.c:1624 +#: elf/dl-load.c:1711 msgid "ELF file version ident does not match current one" msgstr "ELF ファイルバージョン識別子が現在のものと一致していません" -#: elf/dl-load.c:1628 +#: elf/dl-load.c:1715 msgid "ELF file OS ABI invalid" msgstr "ELF ファイル OS ABI が無効です" -#: elf/dl-load.c:1631 +#: elf/dl-load.c:1718 msgid "ELF file ABI version invalid" msgstr "ELF ファイル ABI バージョンが無効です" -#: elf/dl-load.c:1634 +#: elf/dl-load.c:1721 msgid "nonzero padding in e_ident" msgstr "e_ident 内にゼロでない詰め文字があります" -#: elf/dl-load.c:1637 +#: elf/dl-load.c:1724 msgid "internal error" msgstr "内部エラー" -#: elf/dl-load.c:1644 +#: elf/dl-load.c:1731 msgid "ELF file version does not match current one" msgstr "ELFファイルのバージョン番号が現在のファイルに一致していません" -#: elf/dl-load.c:1652 +#: elf/dl-load.c:1739 msgid "only ET_DYN and ET_EXEC can be loaded" msgstr "ET_DYN と ET_EXEC のみロード可能です" -#: elf/dl-load.c:1657 +#: elf/dl-load.c:1744 msgid "ELF file's phentsize not the expected size" msgstr "ELF ファイルの phentsize が予期されたサイズではありません" -#: elf/dl-load.c:2210 +#: elf/dl-load.c:2297 msgid "wrong ELF class: ELFCLASS64" msgstr "間違った ELF クラスです: ELFCLASS64" -#: elf/dl-load.c:2211 +#: elf/dl-load.c:2298 msgid "wrong ELF class: ELFCLASS32" msgstr "間違った ELF クラスです: ELFCLASS32" -#: elf/dl-load.c:2214 +#: elf/dl-load.c:2301 msgid "cannot open shared object file" msgstr "共有オブジェクトファイルを開けません" @@ -596,56 +597,56 @@ msgstr "共有オブジェクトのセグメントをマップするのに失敗 msgid "cannot map zero-fill pages" msgstr "ゼロで埋められたページをマップできません" -#: elf/dl-lookup.c:882 +#: elf/dl-lookup.c:876 msgid "symbol lookup error" msgstr "シンボル検索エラーです" -#: elf/dl-open.c:71 +#: elf/dl-open.c:79 msgid "cannot extend global scope" msgstr "大域スコープを拡張できません" -#: elf/dl-open.c:391 +#: elf/dl-open.c:399 msgid "TLS generation counter wrapped! Please report this." msgstr "TLS 生成カウンタが一周しました! これを報告してください。" -#: elf/dl-open.c:783 +#: elf/dl-open.c:808 msgid "invalid mode for dlopen()" msgstr "dlopen() 用の無効なモードです" -#: elf/dl-open.c:800 +#: elf/dl-open.c:825 msgid "no more namespaces available for dlmopen()" msgstr "dlmopen() 用にこれ以上名前空間を使用出来ません" -#: elf/dl-open.c:824 +#: elf/dl-open.c:849 msgid "invalid target namespace in dlmopen()" msgstr "dlmopen() 内で無効なターゲット名前空間です" -#: elf/dl-reloc.c:120 +#: elf/dl-reloc.c:139 msgid "cannot allocate memory in static TLS block" msgstr "静的 TLS ブロック内にメモリを配置出来ません" -#: elf/dl-reloc.c:213 +#: elf/dl-reloc.c:232 msgid "cannot make segment writable for relocation" msgstr "セグメントを再配置用に書き込み可能に出来ません" -#: elf/dl-reloc.c:273 +#: elf/dl-reloc.c:292 #, c-format msgid "%s: out of memory to store relocation results for %s\n" msgstr "%s: %s 用の再配置結果を保存するときにメモリが足りなくなりました\n" -#: elf/dl-reloc.c:289 +#: elf/dl-reloc.c:308 msgid "cannot restore segment prot after reloc" msgstr "再配置後にセグメントの prot を復元できません" -#: elf/dl-reloc.c:320 +#: elf/dl-reloc.c:339 msgid "cannot apply additional memory protection after relocation" msgstr "再配置後に追加のメモリ保護を適用できません" -#: elf/dl-sym.c:150 +#: elf/dl-sym.c:138 msgid "RTLD_NEXT used in code not dynamically loaded" msgstr "コード内で使用されている RTLD_NEXT を動的にロード出来ません" -#: elf/dl-tls.c:931 +#: elf/dl-tls.c:1011 msgid "cannot create TLS data structures" msgstr "TLS データ構造体を作成できません" @@ -657,211 +658,188 @@ msgstr "バージョン検索エラーです" msgid "cannot allocate version reference table" msgstr "バージョン参照表を配置出来ません" -#: elf/ldconfig.c:142 +#: elf/ldconfig.c:145 msgid "Print cache" msgstr "キャッシュを表示します" -#: elf/ldconfig.c:143 +#: elf/ldconfig.c:146 msgid "Generate verbose messages" msgstr "冗長なメッセージを生成します" -#: elf/ldconfig.c:144 +#: elf/ldconfig.c:147 msgid "Don't build cache" msgstr "キャッシュの構築を行いません" -#: elf/ldconfig.c:146 +#: elf/ldconfig.c:149 msgid "Change to and use ROOT as root directory" msgstr "ルートディレクトリを ROOT に変更し、使用します" -#: elf/ldconfig.c:146 +#: elf/ldconfig.c:149 msgid "ROOT" msgstr "ROOT" -#: elf/ldconfig.c:147 +#: elf/ldconfig.c:150 msgid "CACHE" msgstr "CACHE" -#: elf/ldconfig.c:147 +#: elf/ldconfig.c:150 msgid "Use CACHE as cache file" msgstr "キャッシュファイルとして CACHE を使用します" -#: elf/ldconfig.c:148 +#: elf/ldconfig.c:151 msgid "CONF" msgstr "CONF" -#: elf/ldconfig.c:148 +#: elf/ldconfig.c:151 msgid "Use CONF as configuration file" msgstr "設定ファイルとして CONF を使用します" -#: elf/ldconfig.c:149 +#: elf/ldconfig.c:152 msgid "Only process directories specified on the command line. Don't build cache." msgstr "コマンドラインで指定されたディレクトリのみ処理します。キャッシュは作成しません。" -#: elf/ldconfig.c:150 +#: elf/ldconfig.c:153 msgid "Manually link individual libraries." msgstr "個々のライブラリを手動でリンクしてください。" -#: elf/ldconfig.c:151 +#: elf/ldconfig.c:154 msgid "FORMAT" msgstr "FORMAT" -#: elf/ldconfig.c:151 -msgid "Format to use: new, old or compat (default)" -msgstr "使用する形式: new、old または compat (デフォルト)" - -#: elf/ldconfig.c:152 +#: elf/ldconfig.c:155 msgid "Ignore auxiliary cache file" msgstr "補助キャッシュファイルを無視しています" -#: elf/ldconfig.c:160 +#: elf/ldconfig.c:163 msgid "Configure Dynamic Linker Run Time Bindings." msgstr "動的リンカランタイムのバインディングを設定します。" -#: elf/ldconfig.c:347 +#: elf/ldconfig.c:346 #, c-format msgid "Path `%s' given more than once" msgstr "パス `%s' が二回以上与えられました" -#: elf/ldconfig.c:387 +#: elf/ldconfig.c:393 #, c-format msgid "%s is not a known library type" msgstr "%s は既知のライブラリ型ではありません" -#: elf/ldconfig.c:415 +#: elf/ldconfig.c:421 #, c-format msgid "Can't stat %s" msgstr "%s の情報取得 (stat) ができません" -#: elf/ldconfig.c:489 +#: elf/ldconfig.c:500 #, c-format msgid "Can't stat %s\n" msgstr "%s の情報取得 (stat) が出来ません\n" -#: elf/ldconfig.c:499 +#: elf/ldconfig.c:510 #, c-format msgid "%s is not a symbolic link\n" msgstr "%s はシンボリックリンクではありません\n" -#: elf/ldconfig.c:518 +#: elf/ldconfig.c:529 #, c-format msgid "Can't unlink %s" msgstr "%s をリンク解除できません" -#: elf/ldconfig.c:524 +#: elf/ldconfig.c:535 #, c-format msgid "Can't link %s to %s" msgstr "%s から %s へリンクできません" -#: elf/ldconfig.c:530 +#: elf/ldconfig.c:541 msgid " (changed)\n" msgstr " (変更されました)\n" -#: elf/ldconfig.c:532 +#: elf/ldconfig.c:543 msgid " (SKIPPED)\n" msgstr " (スキップされました)\n" -#: elf/ldconfig.c:587 +#: elf/ldconfig.c:598 #, c-format msgid "Can't find %s" msgstr "%s を見つけられません" -#: elf/ldconfig.c:603 elf/ldconfig.c:769 elf/ldconfig.c:825 elf/ldconfig.c:857 +#: elf/ldconfig.c:614 elf/ldconfig.c:781 elf/ldconfig.c:839 elf/ldconfig.c:871 #, c-format msgid "Cannot lstat %s" msgstr "%s の状態取得 (lstat) が出来ません" -#: elf/ldconfig.c:610 +#: elf/ldconfig.c:621 #, c-format msgid "Ignored file %s since it is not a regular file." msgstr "通常ファイルでないためファイル %s を無視しています。" -#: elf/ldconfig.c:619 +#: elf/ldconfig.c:630 #, c-format msgid "No link created since soname could not be found for %s" msgstr "%s 用の動的ライブラリ名 (soname) が見つからないためリンクが作成されませんでした" -#: elf/ldconfig.c:702 +#: elf/ldconfig.c:714 #, c-format msgid "Can't open directory %s" msgstr "ディレクトリ %s を開けません" -#: elf/ldconfig.c:787 elf/ldconfig.c:845 elf/readlib.c:97 +#: elf/ldconfig.c:799 elf/ldconfig.c:859 elf/readlib.c:97 #, c-format msgid "Input file %s not found.\n" msgstr "入力ファイル %s が見つかりません。\n" -#: elf/ldconfig.c:794 +#: elf/ldconfig.c:806 #, c-format msgid "Cannot stat %s" msgstr "%s の状態取得 (stat) が出来ません" -#: elf/ldconfig.c:939 +#: elf/ldconfig.c:953 #, c-format msgid "libc5 library %s in wrong directory" msgstr "libc5 ライブラリ %s が誤ったディレクトリ内にあります" -#: elf/ldconfig.c:942 +#: elf/ldconfig.c:956 #, c-format msgid "libc6 library %s in wrong directory" msgstr "libc6 ライブラリ %s が誤ったディレクトリ内にあります" -#: elf/ldconfig.c:945 +#: elf/ldconfig.c:959 #, c-format msgid "libc4 library %s in wrong directory" msgstr "libc4 ライブラリ %s が誤ったディレクトリ内にあります" -#: elf/ldconfig.c:973 +#: elf/ldconfig.c:987 #, c-format msgid "libraries %s and %s in directory %s have same soname but different type." msgstr "ディレクトリ %3$s 内にあるライブラリ %1$s と %2$s は同一の動的ライブラリ名 (soname) ですが異なった型です。" -#: elf/ldconfig.c:1149 -#, c-format -msgid "%s:%u: bad syntax in hwcap line" -msgstr "%s:%u: hwcap 行内の構文に誤りがあります" - -#: elf/ldconfig.c:1155 -#, c-format -msgid "%s:%u: hwcap index %lu above maximum %u" -msgstr "%s:%u: hwcap 索引 %lu は最大値 %u を超えています" - -#: elf/ldconfig.c:1162 elf/ldconfig.c:1170 -#, c-format -msgid "%s:%u: hwcap index %lu already defined as %s" -msgstr "%s:%u: hwcap 索引 %lu は既に %s として定義されています" - -#: elf/ldconfig.c:1173 -#, c-format -msgid "%s:%u: duplicate hwcap %lu %s" -msgstr "%s:%u: 重複した hwcap %lu %s です" - -#: elf/ldconfig.c:1195 +#: elf/ldconfig.c:1164 #, c-format msgid "need absolute file name for configuration file when using -r" msgstr "-r を使用しているときは設定ファイル名として絶対パスのファイル名が必要です" -#: elf/ldconfig.c:1202 locale/programs/xmalloc.c:63 malloc/obstack.c:416 -#: malloc/obstack.c:418 posix/getconf.c:458 posix/getconf.c:697 +#: elf/ldconfig.c:1171 locale/programs/xasprintf.c:31 +#: locale/programs/xmalloc.c:63 malloc/obstack.c:416 malloc/obstack.c:418 +#: posix/getconf.c:458 posix/getconf.c:697 #, c-format msgid "memory exhausted" msgstr "メモリを使い果たしました" -#: elf/ldconfig.c:1235 +#: elf/ldconfig.c:1204 #, c-format msgid "%s:%u: cannot read directory %s" msgstr "%s:%u: ディレクトリ %s を読み込めません" -#: elf/ldconfig.c:1283 +#: elf/ldconfig.c:1252 #, c-format msgid "relative path `%s' used to build cache" msgstr "キャッシュ生成時に相対パス `%s' が使用されました" -#: elf/ldconfig.c:1313 +#: elf/ldconfig.c:1276 #, c-format msgid "Can't chdir to /" msgstr "/ へディレクトリ移動 (chdir) 出来ません" -#: elf/ldconfig.c:1354 +#: elf/ldconfig.c:1317 #, c-format msgid "Can't open cache file directory %s\n" msgstr "キャッシュファイルディレクトリ %s を開けません\n" @@ -907,7 +885,7 @@ msgstr "ファイル引数がありません" #. TRANS This is a ``file doesn't exist'' error #. TRANS for ordinary files that are referenced in contexts where they are #. TRANS expected to already exist. -#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.c:37 +#: elf/ldd.bash.in:147 sysdeps/gnu/errlist.h:16 msgid "No such file or directory" msgstr "そのようなファイルやディレクトリはありません" @@ -1154,12 +1132,12 @@ msgstr "`%s' は `%s' 用の正しいプロファイルデータではありま msgid "cannot allocate symbol data" msgstr "シンボルデータを配置出来ません" -#: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:445 +#: iconv/iconv_charmap.c:141 iconv/iconv_prog.c:428 #, c-format msgid "cannot open output file" msgstr "出力ファイルを開けません" -#: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:308 +#: iconv/iconv_charmap.c:187 iconv/iconv_prog.c:291 #, c-format msgid "error while closing input `%s'" msgstr "入力 `%s' を閉じている間にエラーが発生しました" @@ -1169,116 +1147,116 @@ msgstr "入力 `%s' を閉じている間にエラーが発生しました" msgid "illegal input sequence at position %Zd" msgstr "位置 %Zd に不正な入力シーケンスがあります" -#: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:536 +#: iconv/iconv_charmap.c:454 iconv/iconv_prog.c:519 #, c-format msgid "incomplete character or shift sequence at end of buffer" msgstr "バッファの最後に不完全な文字またはシフトシーケンスがあります" -#: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:579 -#: iconv/iconv_prog.c:615 +#: iconv/iconv_charmap.c:499 iconv/iconv_charmap.c:535 iconv/iconv_prog.c:562 +#: iconv/iconv_prog.c:598 #, c-format msgid "error while reading the input" msgstr "入力読み込み中にエラーが発生しました" -#: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:597 +#: iconv/iconv_charmap.c:517 iconv/iconv_prog.c:580 #, c-format msgid "unable to allocate buffer for input" msgstr "入力用バッファを配置することが出来ません" -#: iconv/iconv_prog.c:59 +#: iconv/iconv_prog.c:60 msgid "Input/Output format specification:" msgstr "入力/出力形式の指定:" -#: iconv/iconv_prog.c:60 +#: iconv/iconv_prog.c:61 msgid "encoding of original text" msgstr "元のテキストのエンコーディング" -#: iconv/iconv_prog.c:61 +#: iconv/iconv_prog.c:62 msgid "encoding for output" msgstr "出力用のエンコーディング" -#: iconv/iconv_prog.c:62 +#: iconv/iconv_prog.c:63 msgid "Information:" msgstr "情報:" -#: iconv/iconv_prog.c:63 +#: iconv/iconv_prog.c:64 msgid "list all known coded character sets" msgstr "全ての既知の符号化された文字集合を一覧表示します" -#: iconv/iconv_prog.c:64 locale/programs/localedef.c:124 +#: iconv/iconv_prog.c:65 locale/programs/localedef.c:124 msgid "Output control:" msgstr "出力制御:" -#: iconv/iconv_prog.c:65 +#: iconv/iconv_prog.c:66 msgid "omit invalid characters from output" msgstr "出力から無効な文字を取り除く" -#: iconv/iconv_prog.c:66 +#: iconv/iconv_prog.c:67 msgid "output file" msgstr "出力ファイル" -#: iconv/iconv_prog.c:67 +#: iconv/iconv_prog.c:68 msgid "suppress warnings" msgstr "警告を抑制する" -#: iconv/iconv_prog.c:68 +#: iconv/iconv_prog.c:69 msgid "print progress information" msgstr "経過情報を表示する" -#: iconv/iconv_prog.c:73 +#: iconv/iconv_prog.c:74 msgid "Convert encoding of given files from one encoding to another." msgstr "与えられたファイルのエンコーディングをあるエンコーディングから別のエンコーディングに変換します。" -#: iconv/iconv_prog.c:77 +#: iconv/iconv_prog.c:78 msgid "[FILE...]" msgstr "[FILE...]" -#: iconv/iconv_prog.c:230 +#: iconv/iconv_prog.c:177 iconv/iconv_prog.c:239 +#, c-format +msgid "failed to start conversion processing" +msgstr "変換処理の開始に失敗しました" + +#: iconv/iconv_prog.c:213 #, c-format msgid "conversions from `%s' and to `%s' are not supported" msgstr "`%s' からの変換および `%s' への変換はサポートされていません" -#: iconv/iconv_prog.c:235 +#: iconv/iconv_prog.c:218 #, c-format msgid "conversion from `%s' is not supported" msgstr "`%s' からの変換はサポートされていません" -#: iconv/iconv_prog.c:242 +#: iconv/iconv_prog.c:225 #, c-format msgid "conversion to `%s' is not supported" msgstr "`%s' への変換はサポートされていません" -#: iconv/iconv_prog.c:246 +#: iconv/iconv_prog.c:229 #, c-format msgid "conversion from `%s' to `%s' is not supported" msgstr "`%s'から`%s'への変換はサポートされていません" -#: iconv/iconv_prog.c:256 -#, c-format -msgid "failed to start conversion processing" -msgstr "変換処理の開始に失敗しました" - -#: iconv/iconv_prog.c:354 +#: iconv/iconv_prog.c:337 #, c-format msgid "error while closing output file" msgstr "出力ファイルを閉じている間にエラーが発生しました" -#: iconv/iconv_prog.c:455 +#: iconv/iconv_prog.c:438 #, c-format msgid "conversion stopped due to problem in writing the output" msgstr "出力書き出し中に問題があったため変換を中止しました" -#: iconv/iconv_prog.c:532 +#: iconv/iconv_prog.c:515 #, c-format msgid "illegal input sequence at position %ld" msgstr "位置 %ld に不正な入力シーケンスがあります" -#: iconv/iconv_prog.c:540 +#: iconv/iconv_prog.c:523 #, c-format msgid "internal error (illegal descriptor)" msgstr "内部エラー (不正な記述子) です" -#: iconv/iconv_prog.c:543 +#: iconv/iconv_prog.c:526 #, c-format msgid "unknown iconv() error %d" msgstr "不明な iconv() エラー %d です" @@ -2417,22 +2395,22 @@ msgstr "" "[--add-to-archive|--delete-from-archive] FILE...\n" "--list-archive [FILE]" -#: locale/programs/localedef.c:238 +#: locale/programs/localedef.c:239 #, c-format msgid "cannot create directory for output files" msgstr "出力ファイル用ディレクトリが作成できません" -#: locale/programs/localedef.c:249 +#: locale/programs/localedef.c:250 msgid "FATAL: system does not define `_POSIX2_LOCALEDEF'" msgstr "致命的: システムは `_POSIX2_LOCALEDEF' を定義しません" -#: locale/programs/localedef.c:263 locale/programs/localedef.c:279 -#: locale/programs/localedef.c:673 locale/programs/localedef.c:693 +#: locale/programs/localedef.c:264 locale/programs/localedef.c:280 +#: locale/programs/localedef.c:678 locale/programs/localedef.c:698 #, c-format msgid "cannot open locale definition file `%s'" msgstr "ロケール定義ファイル `%s' を開けません" -#: locale/programs/localedef.c:303 +#: locale/programs/localedef.c:304 #, c-format msgid "cannot write output files to `%s'" msgstr "出力ファイル `%s' へ書き込めません" @@ -2450,11 +2428,11 @@ msgstr "" "ロケールパス用のシステムディレクトリ : %s\n" "%s" -#: locale/programs/localedef.c:641 +#: locale/programs/localedef.c:646 msgid "circular dependencies between locale definitions" msgstr "ロケール定義間で依存関係が循環しています" -#: locale/programs/localedef.c:647 +#: locale/programs/localedef.c:652 #, c-format msgid "cannot add already read locale `%s' a second time" msgstr "読み込み済みのロケール `%s' の二回目の追加は出来ません" @@ -2814,7 +2792,7 @@ msgid "unable to free arguments" msgstr "引数を解放できません" #: nis/nis_error.h:1 nis/ypclnt.c:825 nis/ypclnt.c:914 posix/regcomp.c:135 -#: sysdeps/gnu/errlist.c:21 +#: sysdeps/gnu/errlist.h:4 msgid "Success" msgstr "成功です" @@ -2855,7 +2833,7 @@ msgid "First/next chain broken" msgstr "最初/次のチェインが壊れています" #. TRANS The file permissions do not allow the attempted operation. -#: nis/nis_error.h:11 nis/ypclnt.c:870 sysdeps/gnu/errlist.c:158 +#: nis/nis_error.h:11 nis/ypclnt.c:870 sysdeps/gnu/errlist.h:93 msgid "Permission denied" msgstr "許可がありません" @@ -3320,44 +3298,6 @@ msgstr " 再帰的非メンバ:\n" msgid " No recursive nonmembers\n" msgstr " 非再帰的非メンバ\n" -#: nis/nss_nisplus/nisplus-publickey.c:100 -#: nis/nss_nisplus/nisplus-publickey.c:182 -#, c-format -msgid "DES entry for netname %s not unique\n" -msgstr "ネット名 %s の DES エントリが重複しています\n" - -#: nis/nss_nisplus/nisplus-publickey.c:219 -#, c-format -msgid "netname2user: missing group id list in `%s'" -msgstr "netname2user: `%s' 内にグループ ID リストがありません" - -#: nis/nss_nisplus/nisplus-publickey.c:301 -#: nis/nss_nisplus/nisplus-publickey.c:307 -#: nis/nss_nisplus/nisplus-publickey.c:372 -#: nis/nss_nisplus/nisplus-publickey.c:381 -#, c-format -msgid "netname2user: (nis+ lookup): %s\n" -msgstr "netname2user: (nis+ lookup): %s\n" - -#: nis/nss_nisplus/nisplus-publickey.c:320 -#, c-format -msgid "netname2user: DES entry for %s in directory %s not unique" -msgstr "netname2user: ディレクトリ %2$s の %1$s に対する DES エントリが重複しています" - -#: nis/nss_nisplus/nisplus-publickey.c:338 -#, c-format -msgid "netname2user: principal name `%s' too long" -msgstr "netname2user: プリンシパル名 `%s' が長すぎます" - -#: nis/nss_nisplus/nisplus-publickey.c:394 -#, c-format -msgid "netname2user: LOCAL entry for %s in directory %s not unique" -msgstr "netname2user: ディレクトリ %2$s の %1$s に対する LOCAL エントリが重複していす" - -#: nis/nss_nisplus/nisplus-publickey.c:401 -msgid "netname2user: should not have uid 0" -msgstr "netname2user: uid 0 を使用するべきではありません" - #: nis/ypclnt.c:828 msgid "Request arguments bad" msgstr "引数要求が間違っています" @@ -3446,12 +3386,12 @@ msgstr "yp_update: ホストをネット名へ変換できません\n" msgid "yp_update: cannot get server address\n" msgstr "yp_update: サーバーアドレスを取得できません\n" -#: nscd/aicache.c:82 nscd/hstcache.c:452 +#: nscd/aicache.c:69 nscd/hstcache.c:452 #, c-format msgid "Haven't found \"%s\" in hosts cache!" msgstr "ホストキャッシュ内に \"%s\" が見つかりません!" -#: nscd/aicache.c:84 nscd/hstcache.c:454 +#: nscd/aicache.c:71 nscd/hstcache.c:454 #, c-format msgid "Reloading \"%s\" in hosts cache!" msgstr "ホストキャッシュ内の \"%s\" を再ロードしています" @@ -3646,18 +3586,18 @@ msgstr "getgrouplistに 失敗しました" msgid "setgroups failed" msgstr "setgroups に失敗しました" -#: nscd/grpcache.c:385 nscd/hstcache.c:402 nscd/initgrcache.c:385 +#: nscd/grpcache.c:385 nscd/hstcache.c:402 nscd/initgrcache.c:379 #: nscd/pwdcache.c:363 nscd/servicescache.c:310 #, c-format msgid "short write in %s: %s" msgstr "%s での短い書き込み: %s" -#: nscd/grpcache.c:430 nscd/initgrcache.c:81 +#: nscd/grpcache.c:430 nscd/initgrcache.c:75 #, c-format msgid "Haven't found \"%s\" in group cache!" msgstr "グループキャッシュ内に \"%s\" が見つかりません!" -#: nscd/grpcache.c:432 nscd/initgrcache.c:83 +#: nscd/grpcache.c:432 nscd/initgrcache.c:77 #, c-format msgid "Reloading \"%s\" in group cache!" msgstr "グループキャッシュ内の \"%s\" を再ロードしています!" @@ -3677,104 +3617,104 @@ msgstr "%zu バイト解放されました (%s キャッシュ内)" msgid "no more memory for database '%s'" msgstr "データベース '%s' 用のメモリがこれ以上ありません" -#: nscd/nscd.c:106 +#: nscd/nscd.c:108 msgid "Read configuration data from NAME" msgstr "NAME から設定情報を読み込む" -#: nscd/nscd.c:108 +#: nscd/nscd.c:110 msgid "Do not fork and display messages on the current tty" msgstr "fork しないで現在の tty にメッセージを表示する" -#: nscd/nscd.c:111 +#: nscd/nscd.c:115 msgid "NUMBER" msgstr "NUMBER" -#: nscd/nscd.c:111 +#: nscd/nscd.c:115 msgid "Start NUMBER threads" msgstr "NUMBERスレッドで起動する" -#: nscd/nscd.c:112 +#: nscd/nscd.c:116 msgid "Shut the server down" msgstr "サーバーを終了する" -#: nscd/nscd.c:113 +#: nscd/nscd.c:117 msgid "Print current configuration statistics" msgstr "現在の設定の統計情報を表示する" -#: nscd/nscd.c:114 +#: nscd/nscd.c:118 msgid "TABLE" msgstr "TABLE" -#: nscd/nscd.c:115 +#: nscd/nscd.c:119 msgid "Invalidate the specified cache" msgstr "指定したキャッシュを無効にする" -#: nscd/nscd.c:116 +#: nscd/nscd.c:120 msgid "TABLE,yes" msgstr "TABLE,yes" -#: nscd/nscd.c:117 +#: nscd/nscd.c:121 msgid "Use separate cache for each user" msgstr "ユーザごとにキャッシュを分離する" -#: nscd/nscd.c:122 +#: nscd/nscd.c:126 msgid "Name Service Cache Daemon." msgstr "名前サービスキャッシュデーモン。" -#: nscd/nscd.c:155 nss/getent.c:987 nss/makedb.c:206 +#: nscd/nscd.c:159 nss/getent.c:987 nss/makedb.c:206 #, c-format msgid "wrong number of arguments" msgstr "引数の数が間違っています" -#: nscd/nscd.c:165 +#: nscd/nscd.c:174 #, c-format msgid "failure while reading configuration file; this is fatal" msgstr "設定ファイルの読み込みに失敗しました。これは致命的です" -#: nscd/nscd.c:174 +#: nscd/nscd.c:183 #, c-format msgid "already running" msgstr "既に起動しています" -#: nscd/nscd.c:198 +#: nscd/nscd.c:207 #, c-format msgid "cannot fork" msgstr "fork できません" -#: nscd/nscd.c:268 +#: nscd/nscd.c:277 msgid "cannot change current working directory to \"/\"" msgstr "現在の作業ディレクトリを \"/\" に変更できません" -#: nscd/nscd.c:276 +#: nscd/nscd.c:285 msgid "Could not create log file" msgstr "ログファイルを作成できませんでした" -#: nscd/nscd.c:355 nscd/nscd_stat.c:209 +#: nscd/nscd.c:364 nscd/nscd_stat.c:209 #, c-format msgid "write incomplete" msgstr "書込みが不完全です" -#: nscd/nscd.c:366 +#: nscd/nscd.c:375 #, c-format msgid "cannot read invalidate ACK" msgstr "無効にした ACK を読み込めません" -#: nscd/nscd.c:372 +#: nscd/nscd.c:381 #, c-format msgid "invalidation failed" msgstr "無効化に失敗しました" -#: nscd/nscd.c:417 nscd/nscd.c:442 nscd/nscd_stat.c:190 +#: nscd/nscd.c:430 nscd/nscd.c:455 nscd/nscd_stat.c:190 #, c-format msgid "Only root is allowed to use this option!" msgstr "root のみこのオプションを使用することを許可されています!" -#: nscd/nscd.c:437 +#: nscd/nscd.c:450 #, c-format msgid "'%s' is not a known database" msgstr "'%s' は既知のデータベースではありません" -#: nscd/nscd.c:452 +#: nscd/nscd.c:465 #, c-format msgid "secure services not implemented anymore" msgstr "セキュアなサービスはもう実装されていません" @@ -4426,7 +4366,7 @@ msgstr "出力バッファーが使用可能です" msgid "Input message available" msgstr "入力メッセージが使用可能です" -#: stdio-common/psiginfo-data.h:46 timezone/zdump.c:375 timezone/zic.c:561 +#: stdio-common/psiginfo-data.h:46 timezone/zdump.c:375 timezone/zic.c:564 msgid "I/O error" msgstr "I/Oエラーです" @@ -4488,20 +4428,16 @@ msgstr "%s%s不明なシグナル %d です\n" msgid "Unknown signal" msgstr "不明なシグナルです" -#: string/_strerror.c:45 sysdeps/mach/_strerror.c:86 +#: string/_strerror.c:30 sysdeps/mach/_strerror.c:55 msgid "Unknown error " msgstr "不明なエラーです" -#: string/strerror.c:41 -msgid "Unknown error" -msgstr "不明なエラー" - -#: string/strsignal.c:60 +#: string/strsignal.c:39 #, c-format msgid "Real-time signal %d" msgstr "リアルタイムシグナル %d" -#: string/strsignal.c:64 +#: string/strsignal.c:43 #, c-format msgid "Unknown signal %d" msgstr "不明なシグナル %d" @@ -4605,35 +4541,35 @@ msgstr "RPC: 失敗しました (原因不特定のエラー)" msgid "RPC: (unknown error code)" msgstr "RPC: (未知のエラーコード)" -#: sunrpc/clnt_perr.c:330 +#: sunrpc/clnt_perr.c:334 msgid "Authentication OK" msgstr "認証 OK" -#: sunrpc/clnt_perr.c:333 +#: sunrpc/clnt_perr.c:337 msgid "Invalid client credential" msgstr "無効なクライアントの信任です" -#: sunrpc/clnt_perr.c:337 +#: sunrpc/clnt_perr.c:341 msgid "Server rejected credential" msgstr "サーバーが証明を拒否しました" -#: sunrpc/clnt_perr.c:341 +#: sunrpc/clnt_perr.c:345 msgid "Invalid client verifier" msgstr "無効なクライアント確認です" -#: sunrpc/clnt_perr.c:345 +#: sunrpc/clnt_perr.c:349 msgid "Server rejected verifier" msgstr "サーバーが確認を拒否しました" -#: sunrpc/clnt_perr.c:349 +#: sunrpc/clnt_perr.c:353 msgid "Client credential too weak" msgstr "クライアントの信任が弱すぎます" -#: sunrpc/clnt_perr.c:353 +#: sunrpc/clnt_perr.c:357 msgid "Invalid server verifier" msgstr "無効なサーバー認証者です" -#: sunrpc/clnt_perr.c:357 +#: sunrpc/clnt_perr.c:361 msgid "Failed (unspecified error)" msgstr "失敗しました(原因不特定のエラー)" @@ -4669,248 +4605,6 @@ msgstr "ブロードキャスト調査で問題" msgid "Cannot receive reply to broadcast" msgstr "ブロードキャストへの応答を受け取られません" -#: sunrpc/rpc_main.c:281 -#, c-format -msgid "%s: output would overwrite %s\n" -msgstr "%s: 出力は %s を上書きしてしまうかもしれません\n" - -#: sunrpc/rpc_main.c:288 -#, c-format -msgid "%s: unable to open %s: %m\n" -msgstr "%s: %s を開けません: %m\n" - -#: sunrpc/rpc_main.c:300 -#, c-format -msgid "%s: while writing output %s: %m" -msgstr "%s: 出力 %s を書き込み中: %m" - -#: sunrpc/rpc_main.c:411 -#, c-format -msgid "%s: C preprocessor failed with signal %d\n" -msgstr "%s: C プリプロセッサはシグナル %d で失敗しました\n" - -#: sunrpc/rpc_main.c:414 -#, c-format -msgid "%s: C preprocessor failed with exit code %d\n" -msgstr "%s: C プリプロセッサは終了コード %d で失敗しました\n" - -#: sunrpc/rpc_main.c:454 -#, c-format -msgid "illegal nettype: `%s'\n" -msgstr "不正な nettype です: `%s'\n" - -#: sunrpc/rpc_main.c:1089 -#, c-format -msgid "rpcgen: too many defines\n" -msgstr "rpcgen: 定義が多すぎます\n" - -#: sunrpc/rpc_main.c:1101 -#, c-format -msgid "rpcgen: arglist coding error\n" -msgstr "rpcgen: 引数リストコーディングエラー\n" - -#. TRANS: the file will not be removed; this is an -#. TRANS: informative message. -#: sunrpc/rpc_main.c:1134 -#, c-format -msgid "file `%s' already exists and may be overwritten\n" -msgstr "ファイル`%s'は既に存在します。上書きされるかもしれません\n" - -#: sunrpc/rpc_main.c:1179 -#, c-format -msgid "Cannot specify more than one input file!\n" -msgstr "入力ファイルを複数指定できません!\n" - -#: sunrpc/rpc_main.c:1349 -#, c-format -msgid "Cannot use netid flag with inetd flag!\n" -msgstr "inetd フラグとともに netid フラグは使えません!\n" - -#: sunrpc/rpc_main.c:1358 -#, c-format -msgid "Cannot use netid flag without TIRPC!\n" -msgstr "TIRPC なしに netid フラグは使えません!\n" - -#: sunrpc/rpc_main.c:1365 -#, c-format -msgid "Cannot use table flags with newstyle!\n" -msgstr "新形式をもつテーブルフラグは使えません!\n" - -#: sunrpc/rpc_main.c:1384 -#, c-format -msgid "\"infile\" is required for template generation flags.\n" -msgstr "テンプレート生成フラグには\"infile\"が必要です.\n" - -#: sunrpc/rpc_main.c:1389 -#, c-format -msgid "Cannot have more than one file generation flag!\n" -msgstr "ファイル生成フラグは複数指定できません!\n" - -#: sunrpc/rpc_main.c:1398 -#, c-format -msgid "usage: %s infile\n" -msgstr "使用法: %s infile\n" - -#: sunrpc/rpc_main.c:1399 -#, c-format -msgid "\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] infile\n" -msgstr "\t%s [-abkCLNTM][-Dname[=value]] [-i size] [-I [-K seconds]] [-Y path] infile\n" - -#: sunrpc/rpc_main.c:1401 -#, c-format -msgid "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" -msgstr "\t%s [-c | -h | -l | -m | -t | -Sc | -Ss | -Sm] [-o outfile] [infile]\n" - -#: sunrpc/rpc_main.c:1403 -#, c-format -msgid "\t%s [-s nettype]* [-o outfile] [infile]\n" -msgstr "\t%s [-s nettype]* [-o outfile] [infile]\n" - -#: sunrpc/rpc_main.c:1404 -#, c-format -msgid "\t%s [-n netid]* [-o outfile] [infile]\n" -msgstr "\t%s [-n netid]* [-o outfile] [infile]\n" - -#: sunrpc/rpc_main.c:1412 -#, c-format -msgid "options:\n" -msgstr "オプション:\n" - -#: sunrpc/rpc_main.c:1413 -#, c-format -msgid "-a\t\tgenerate all files, including samples\n" -msgstr "-a\t\tすべてのファイル (サンプルを含む) を生成する\n" - -#: sunrpc/rpc_main.c:1414 -#, c-format -msgid "-b\t\tbackward compatibility mode (generates code for SunOS 4.1)\n" -msgstr "-b\t\t後方互換性モード (SunOS 4.1 用のコードを生成)\n" - -#: sunrpc/rpc_main.c:1415 -#, c-format -msgid "-c\t\tgenerate XDR routines\n" -msgstr "-c\t\tXDR ルーチンを生成する\n" - -#: sunrpc/rpc_main.c:1416 -#, c-format -msgid "-C\t\tANSI C mode\n" -msgstr "-C\t\tANSI C モード\n" - -#: sunrpc/rpc_main.c:1417 -#, c-format -msgid "-Dname[=value]\tdefine a symbol (same as #define)\n" -msgstr "-Dname[=value]\tシンボルを定義する (#define と同様)\n" - -#: sunrpc/rpc_main.c:1418 -#, c-format -msgid "-h\t\tgenerate header file\n" -msgstr "-h\t\tヘッダーファイルを生成する\n" - -#: sunrpc/rpc_main.c:1419 -#, c-format -msgid "-i size\t\tsize at which to start generating inline code\n" -msgstr "-i size\t\tインラインコードを生成開始するサイズを size にする\n" - -#: sunrpc/rpc_main.c:1420 -#, c-format -msgid "-I\t\tgenerate code for inetd support in server (for SunOS 4.1)\n" -msgstr "-I\t\tサーバーで inetd サポート用のコードを生成する (SunOS 4.1 用)\n" - -#: sunrpc/rpc_main.c:1421 -#, c-format -msgid "-K seconds\tserver exits after K seconds of inactivity\n" -msgstr "-K seconds\tK 秒間活動がなければサーバーを終了する\n" - -#: sunrpc/rpc_main.c:1422 -#, c-format -msgid "-l\t\tgenerate client side stubs\n" -msgstr "-l\t\tクライアント側スタブを生成する\n" - -#: sunrpc/rpc_main.c:1423 -#, c-format -msgid "-L\t\tserver errors will be printed to syslog\n" -msgstr "-L\t\tサーバーのエラーを syslog に出力する\n" - -#: sunrpc/rpc_main.c:1424 -#, c-format -msgid "-m\t\tgenerate server side stubs\n" -msgstr "-m\t\tサーバー側スタブを生成する\n" - -#: sunrpc/rpc_main.c:1425 -#, c-format -msgid "-M\t\tgenerate MT-safe code\n" -msgstr "-M\t\tマルチスレッドセーフなコードを生成する\n" - -#: sunrpc/rpc_main.c:1426 -#, c-format -msgid "-n netid\tgenerate server code that supports named netid\n" -msgstr "-n netid\tnetid という名前をサポートするサーバーコードを生成する\n" - -#: sunrpc/rpc_main.c:1427 -#, c-format -msgid "-N\t\tsupports multiple arguments and call-by-value\n" -msgstr "-N\t\t複数の引数と値呼び出しをサポートする\n" - -#: sunrpc/rpc_main.c:1428 -#, c-format -msgid "-o outfile\tname of the output file\n" -msgstr "-o outfile\t出力ファイルの名前を設定する\n" - -#: sunrpc/rpc_main.c:1429 -#, c-format -msgid "-s nettype\tgenerate server code that supports named nettype\n" -msgstr "-s nettype\tnettype という名前をサポートするサーバーコードを生成する\n" - -#: sunrpc/rpc_main.c:1430 -#, c-format -msgid "-Sc\t\tgenerate sample client code that uses remote procedures\n" -msgstr "-Sc\t\tリモート手続きを使用するクライアントコードのサンプルを生成する\n" - -#: sunrpc/rpc_main.c:1431 -#, c-format -msgid "-Ss\t\tgenerate sample server code that defines remote procedures\n" -msgstr "-Ss\t\tリモート手続きを定義するサーバーコードのサンプルを生成する\n" - -#: sunrpc/rpc_main.c:1432 -#, c-format -msgid "-Sm \t\tgenerate makefile template \n" -msgstr "-Sm \t\tmakefile のテンプレートを生成する\n" - -#: sunrpc/rpc_main.c:1433 -#, c-format -msgid "-t\t\tgenerate RPC dispatch table\n" -msgstr "-t\t\tRPC ディスパッチ表を生成する\n" - -#: sunrpc/rpc_main.c:1434 -#, c-format -msgid "-T\t\tgenerate code to support RPC dispatch tables\n" -msgstr "-T\t\tRPC ディスパッチ表をサポートするためのコードを生成する\n" - -#: sunrpc/rpc_main.c:1435 -#, c-format -msgid "-Y path\t\tdirectory name to find C preprocessor (cpp)\n" -msgstr "-Y path\t\tC プリプロセッサ (cpp) を見つけるためのディレクトリ名\n" - -#: sunrpc/rpc_scan.c:112 -msgid "constant or identifier expected" -msgstr "定数または識別子が適当です" - -#: sunrpc/rpc_scan.c:308 -msgid "illegal character in file: " -msgstr "ファイル中に不正なキャラクタがあります: " - -#: sunrpc/rpc_scan.c:347 sunrpc/rpc_scan.c:373 -msgid "unterminated string constant" -msgstr "文字列定数が終了していません" - -#: sunrpc/rpc_scan.c:379 -msgid "empty char string" -msgstr "空の char 文字列" - -#: sunrpc/rpc_scan.c:521 sunrpc/rpc_scan.c:531 -msgid "preprocessor error" -msgstr "プリプロセッサエラー" - #: sunrpc/svc_run.c:72 msgid "svc_run: - out of memory" msgstr "svc_run: - メモリが足りません" @@ -5052,7 +4746,7 @@ msgstr "Segmentation fault" #. TRANS @code{SIGPIPE} signal; this signal terminates the program if not handled #. TRANS or blocked. Thus, your program will never actually see @code{EPIPE} #. TRANS unless it has handled or blocked @code{SIGPIPE}. -#: sysdeps/generic/siglist.h:40 sysdeps/gnu/errlist.c:360 +#: sysdeps/generic/siglist.h:40 sysdeps/gnu/errlist.h:219 msgid "Broken pipe" msgstr "Broken pipe" @@ -5146,12 +4840,12 @@ msgstr "リソースが無くなりました" #. TRANS Only the owner of the file (or other resource) #. TRANS or processes with special privileges can perform the operation. -#: sysdeps/gnu/errlist.c:26 +#: sysdeps/gnu/errlist.h:9 msgid "Operation not permitted" msgstr "許可されていない操作です" #. TRANS No process matches the specified process ID. -#: sysdeps/gnu/errlist.c:46 +#: sysdeps/gnu/errlist.h:21 msgid "No such process" msgstr "そのようなプロセスはありません" @@ -5162,12 +4856,12 @@ msgstr "そのようなプロセスはありません" #. TRANS You can choose to have functions resume after a signal that is handled, #. TRANS rather than failing with @code{EINTR}; see @ref{Interrupted #. TRANS Primitives}. -#: sysdeps/gnu/errlist.c:61 +#: sysdeps/gnu/errlist.h:32 msgid "Interrupted system call" msgstr "システムコール割り込み" #. TRANS Usually used for physical read or write errors. -#: sysdeps/gnu/errlist.c:70 +#: sysdeps/gnu/errlist.h:37 msgid "Input/output error" msgstr "入力/出力エラーです" @@ -5176,7 +4870,7 @@ msgstr "入力/出力エラーです" #. TRANS This can mean that the device file was installed incorrectly, or that #. TRANS the physical device is missing or not correctly attached to the #. TRANS computer. -#: sysdeps/gnu/errlist.c:83 +#: sysdeps/gnu/errlist.h:46 msgid "No such device or address" msgstr "そのようなデバイスやアドレスはありません" @@ -5184,27 +4878,27 @@ msgstr "そのようなデバイスやアドレスはありません" #. TRANS being executed with one of the @code{exec} functions (@pxref{Executing a #. TRANS File}) occupy too much memory space. This condition never arises on #. TRANS @gnuhurdsystems{}. -#: sysdeps/gnu/errlist.c:95 +#: sysdeps/gnu/errlist.h:54 msgid "Argument list too long" msgstr "引数リストが長すぎます" #. TRANS Invalid executable file format. This condition is detected by the #. TRANS @code{exec} functions; see @ref{Executing a File}. -#: sysdeps/gnu/errlist.c:105 +#: sysdeps/gnu/errlist.h:60 msgid "Exec format error" msgstr "実行形式エラー" #. TRANS For example, I/O on a descriptor that has been #. TRANS closed or reading from a descriptor open only for writing (or vice #. TRANS versa). -#: sysdeps/gnu/errlist.c:116 +#: sysdeps/gnu/errlist.h:67 msgid "Bad file descriptor" msgstr "不正なファイル記述子です" #. TRANS This error happens on operations that are #. TRANS supposed to manipulate child processes, when there aren't any processes #. TRANS to manipulate. -#: sysdeps/gnu/errlist.c:127 +#: sysdeps/gnu/errlist.h:74 msgid "No child processes" msgstr "子プロセスがありません" @@ -5212,69 +4906,69 @@ msgstr "子プロセスがありません" #. TRANS deadlock situation. The system does not guarantee that it will notice #. TRANS all such situations. This error means you got lucky and the system #. TRANS noticed; it might just hang. @xref{File Locks}, for an example. -#: sysdeps/gnu/errlist.c:139 +#: sysdeps/gnu/errlist.h:82 msgid "Resource deadlock avoided" msgstr "リソースのデッドロック回避" #. TRANS The system cannot allocate more virtual memory #. TRANS because its capacity is full. -#: sysdeps/gnu/errlist.c:149 +#: sysdeps/gnu/errlist.h:88 msgid "Cannot allocate memory" msgstr "メモリを確保できません" #. TRANS An invalid pointer was detected. #. TRANS On @gnuhurdsystems{}, this error never happens; you get a signal instead. -#: sysdeps/gnu/errlist.c:168 +#: sysdeps/gnu/errlist.h:99 msgid "Bad address" msgstr "不正なアドレスです" #. TRANS A file that isn't a block special file was given in a situation that #. TRANS requires one. For example, trying to mount an ordinary file as a file #. TRANS system in Unix gives this error. -#: sysdeps/gnu/errlist.c:179 +#: sysdeps/gnu/errlist.h:106 msgid "Block device required" msgstr "ブロックデバイスが必要です" #. TRANS A system resource that can't be shared is already in use. #. TRANS For example, if you try to delete a file that is the root of a currently #. TRANS mounted filesystem, you get this error. -#: sysdeps/gnu/errlist.c:190 +#: sysdeps/gnu/errlist.h:113 msgid "Device or resource busy" msgstr "デバイスもしくはリソースがビジー状態です" #. TRANS An existing file was specified in a context where it only #. TRANS makes sense to specify a new file. -#: sysdeps/gnu/errlist.c:200 +#: sysdeps/gnu/errlist.h:119 msgid "File exists" msgstr "ファイルが存在します" #. TRANS An attempt to make an improper link across file systems was detected. #. TRANS This happens not only when you use @code{link} (@pxref{Hard Links}) but #. TRANS also when you rename a file with @code{rename} (@pxref{Renaming Files}). -#: sysdeps/gnu/errlist.c:211 +#: sysdeps/gnu/errlist.h:126 msgid "Invalid cross-device link" msgstr "無効なクロスデバイスリンクです" #. TRANS The wrong type of device was given to a function that expects a #. TRANS particular sort of device. -#: sysdeps/gnu/errlist.c:221 +#: sysdeps/gnu/errlist.h:132 msgid "No such device" msgstr "そのようなデバイスはありません" #. TRANS A file that isn't a directory was specified when a directory is required. -#: sysdeps/gnu/errlist.c:230 +#: sysdeps/gnu/errlist.h:137 msgid "Not a directory" msgstr "ディレクトリではありません" #. TRANS You cannot open a directory for writing, #. TRANS or create or remove hard links to it. -#: sysdeps/gnu/errlist.c:240 +#: sysdeps/gnu/errlist.h:143 msgid "Is a directory" msgstr "ディレクトリです" #. TRANS This is used to indicate various kinds of problems #. TRANS with passing the wrong argument to a library function. -#: sysdeps/gnu/errlist.c:250 +#: sysdeps/gnu/errlist.h:149 msgid "Invalid argument" msgstr "無効な引数です" @@ -5285,20 +4979,20 @@ msgstr "無効な引数です" #. TRANS limit that can usually be increased. If you get this error, you might #. TRANS want to increase the @code{RLIMIT_NOFILE} limit or make it unlimited; #. TRANS @pxref{Limits on Resources}. -#: sysdeps/gnu/errlist.c:265 +#: sysdeps/gnu/errlist.h:160 msgid "Too many open files" msgstr "ファイルを開きすぎです" #. TRANS There are too many distinct file openings in the entire system. Note #. TRANS that any number of linked channels count as just one file opening; see #. TRANS @ref{Linked Channels}. This error never occurs on @gnuhurdsystems{}. -#: sysdeps/gnu/errlist.c:276 +#: sysdeps/gnu/errlist.h:167 msgid "Too many open files in system" msgstr "システム中のファイルを開きすぎです" #. TRANS Inappropriate I/O control operation, such as trying to set terminal #. TRANS modes on an ordinary file. -#: sysdeps/gnu/errlist.c:286 +#: sysdeps/gnu/errlist.h:173 msgid "Inappropriate ioctl for device" msgstr "デバイスに対する不適切なioctlです" @@ -5307,47 +5001,47 @@ msgstr "デバイスに対する不適切なioctlです" #. TRANS debugger to run a program is considered having it open for writing and #. TRANS will cause this error. (The name stands for ``text file busy''.) This #. TRANS is not an error on @gnuhurdsystems{}; the text is copied as necessary. -#: sysdeps/gnu/errlist.c:299 +#: sysdeps/gnu/errlist.h:182 msgid "Text file busy" msgstr "テキストファイルがビジー状態です" #. TRANS The size of a file would be larger than allowed by the system. -#: sysdeps/gnu/errlist.c:308 +#: sysdeps/gnu/errlist.h:187 msgid "File too large" msgstr "ファイルが大きすぎます" #. TRANS Write operation on a file failed because the #. TRANS disk is full. -#: sysdeps/gnu/errlist.c:318 +#: sysdeps/gnu/errlist.h:193 msgid "No space left on device" msgstr "デバイスに空き領域がありません" #. TRANS Invalid seek operation (such as on a pipe). -#: sysdeps/gnu/errlist.c:327 +#: sysdeps/gnu/errlist.h:198 msgid "Illegal seek" msgstr "不正なシークです" #. TRANS An attempt was made to modify something on a read-only file system. -#: sysdeps/gnu/errlist.c:336 +#: sysdeps/gnu/errlist.h:203 msgid "Read-only file system" msgstr "読み込み専用ファイルシステムです" #. TRANS The link count of a single file would become too large. #. TRANS @code{rename} can cause this error if the file being renamed already has #. TRANS as many links as it can take (@pxref{Renaming Files}). -#: sysdeps/gnu/errlist.c:347 +#: sysdeps/gnu/errlist.h:210 msgid "Too many links" msgstr "リンクが多すぎます" #. TRANS Used by mathematical functions when an argument value does #. TRANS not fall into the domain over which the function is defined. -#: sysdeps/gnu/errlist.c:370 +#: sysdeps/gnu/errlist.h:225 msgid "Numerical argument out of domain" msgstr "数値の引数はドメイン外です" #. TRANS Used by mathematical functions when the result value is #. TRANS not representable because of overflow or underflow. -#: sysdeps/gnu/errlist.c:380 +#: sysdeps/gnu/errlist.h:231 msgid "Numerical result out of range" msgstr "計算結果は範囲外の値です" @@ -5380,19 +5074,10 @@ msgstr "計算結果は範囲外の値です" #. TRANS so usually an interactive program should report the error to the user #. TRANS and return to its command loop. #. TRANS @end itemize -#: sysdeps/gnu/errlist.c:417 +#: sysdeps/gnu/errlist.h:264 msgid "Resource temporarily unavailable" msgstr "リソースが一時的に利用できません" -#. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). -#. TRANS The values are always the same, on every operating system. -#. TRANS -#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a -#. TRANS separate error code. -#: sysdeps/gnu/errlist.c:430 -msgid "Operation would block" -msgstr "ブロックされうる操作です" - #. TRANS An operation that cannot complete immediately was initiated on an object #. TRANS that has non-blocking mode selected. Some functions that must always #. TRANS block (such as @code{connect}; @pxref{Connecting}) never return @@ -5401,47 +5086,47 @@ msgstr "ブロックされうる操作です" #. TRANS the object before the call completes return @code{EALREADY}. You can #. TRANS use the @code{select} function to find out when the pending operation #. TRANS has completed; @pxref{Waiting for I/O}. -#: sysdeps/gnu/errlist.c:446 +#: sysdeps/gnu/errlist.h:276 msgid "Operation now in progress" msgstr "現在処理中の操作です" #. TRANS An operation is already in progress on an object that has non-blocking #. TRANS mode selected. -#: sysdeps/gnu/errlist.c:456 +#: sysdeps/gnu/errlist.h:282 msgid "Operation already in progress" msgstr "操作はすでに処理中です" #. TRANS A file that isn't a socket was specified when a socket is required. -#: sysdeps/gnu/errlist.c:465 +#: sysdeps/gnu/errlist.h:287 msgid "Socket operation on non-socket" msgstr "ソケットでないものにソケット操作をしています" #. TRANS The size of a message sent on a socket was larger than the supported #. TRANS maximum size. -#: sysdeps/gnu/errlist.c:475 +#: sysdeps/gnu/errlist.h:293 msgid "Message too long" msgstr "メッセージが長すぎます" #. TRANS The socket type does not support the requested communications protocol. -#: sysdeps/gnu/errlist.c:484 +#: sysdeps/gnu/errlist.h:298 msgid "Protocol wrong type for socket" msgstr "ソケットに対し間違ったプロトコルの形式です" #. TRANS You specified a socket option that doesn't make sense for the #. TRANS particular protocol being used by the socket. @xref{Socket Options}. -#: sysdeps/gnu/errlist.c:494 +#: sysdeps/gnu/errlist.h:304 msgid "Protocol not available" msgstr "プロトコルは利用できません" #. TRANS The socket domain does not support the requested communications protocol #. TRANS (perhaps because the requested protocol is completely invalid). #. TRANS @xref{Creating a Socket}. -#: sysdeps/gnu/errlist.c:505 +#: sysdeps/gnu/errlist.h:311 msgid "Protocol not supported" msgstr "プロトコルはサポートされていません" #. TRANS The socket type is not supported. -#: sysdeps/gnu/errlist.c:514 +#: sysdeps/gnu/errlist.h:316 msgid "Socket type not supported" msgstr "ソケット形式はサポートしていません" @@ -5451,71 +5136,71 @@ msgstr "ソケット形式はサポートしていません" #. TRANS error can happen for many calls when the object does not support the #. TRANS particular operation; it is a generic indication that the server knows #. TRANS nothing to do for that call. -#: sysdeps/gnu/errlist.c:528 +#: sysdeps/gnu/errlist.h:326 msgid "Operation not supported" msgstr "サポートされていない操作です" #. TRANS The socket communications protocol family you requested is not supported. -#: sysdeps/gnu/errlist.c:537 +#: sysdeps/gnu/errlist.h:331 msgid "Protocol family not supported" msgstr "プロトコルファミリはサポートしていません" #. TRANS The address family specified for a socket is not supported; it is #. TRANS inconsistent with the protocol being used on the socket. @xref{Sockets}. -#: sysdeps/gnu/errlist.c:547 +#: sysdeps/gnu/errlist.h:337 msgid "Address family not supported by protocol" msgstr "アドレスファミリはプロトコルによってサポートされていません" #. TRANS The requested socket address is already in use. @xref{Socket Addresses}. -#: sysdeps/gnu/errlist.c:556 +#: sysdeps/gnu/errlist.h:342 msgid "Address already in use" msgstr "アドレスは既に使用中です" #. TRANS The requested socket address is not available; for example, you tried #. TRANS to give a socket a name that doesn't match the local host name. #. TRANS @xref{Socket Addresses}. -#: sysdeps/gnu/errlist.c:567 +#: sysdeps/gnu/errlist.h:349 msgid "Cannot assign requested address" msgstr "要求アドレスに割り当てられません" #. TRANS A socket operation failed because the network was down. -#: sysdeps/gnu/errlist.c:576 +#: sysdeps/gnu/errlist.h:354 msgid "Network is down" msgstr "ネットワークが落ちています" #. TRANS A socket operation failed because the subnet containing the remote host #. TRANS was unreachable. -#: sysdeps/gnu/errlist.c:586 +#: sysdeps/gnu/errlist.h:360 msgid "Network is unreachable" msgstr "ネットワークに届きません" #. TRANS A network connection was reset because the remote host crashed. -#: sysdeps/gnu/errlist.c:595 +#: sysdeps/gnu/errlist.h:365 msgid "Network dropped connection on reset" msgstr "リセット中ネットワークの接続が切れました" #. TRANS A network connection was aborted locally. -#: sysdeps/gnu/errlist.c:604 +#: sysdeps/gnu/errlist.h:370 msgid "Software caused connection abort" msgstr "ソフトウェアが接続を中断しました" #. TRANS A network connection was closed for reasons outside the control of the #. TRANS local host, such as by the remote machine rebooting or an unrecoverable #. TRANS protocol violation. -#: sysdeps/gnu/errlist.c:615 +#: sysdeps/gnu/errlist.h:377 msgid "Connection reset by peer" msgstr "接続が相手からリセットされました" #. TRANS The kernel's buffers for I/O operations are all in use. In GNU, this #. TRANS error is always synonymous with @code{ENOMEM}; you may get one or the #. TRANS other from network operations. -#: sysdeps/gnu/errlist.c:626 +#: sysdeps/gnu/errlist.h:384 msgid "No buffer space available" msgstr "利用可能な空きバッファがありません" #. TRANS You tried to connect a socket that is already connected. #. TRANS @xref{Connecting}. -#: sysdeps/gnu/errlist.c:636 +#: sysdeps/gnu/errlist.h:390 msgid "Transport endpoint is already connected" msgstr "通信端点が既に接続されています" @@ -5523,82 +5208,74 @@ msgstr "通信端点が既に接続されています" #. TRANS try to transmit data over a socket, without first specifying a #. TRANS destination for the data. For a connectionless socket (for datagram #. TRANS protocols, such as UDP), you get @code{EDESTADDRREQ} instead. -#: sysdeps/gnu/errlist.c:648 +#: sysdeps/gnu/errlist.h:398 msgid "Transport endpoint is not connected" msgstr "通信端点が接続されていません" #. TRANS No default destination address was set for the socket. You get this #. TRANS error when you try to transmit data over a connectionless socket, #. TRANS without first specifying a destination for the data with @code{connect}. -#: sysdeps/gnu/errlist.c:659 +#: sysdeps/gnu/errlist.h:405 msgid "Destination address required" msgstr "送信先アドレスが必要です" #. TRANS The socket has already been shut down. -#: sysdeps/gnu/errlist.c:668 +#: sysdeps/gnu/errlist.h:410 msgid "Cannot send after transport endpoint shutdown" msgstr "通信端点のシャットダウン後は送信できません" -#: sysdeps/gnu/errlist.c:676 +#: sysdeps/gnu/errlist.h:413 msgid "Too many references: cannot splice" msgstr "参照が多すぎます: 接続できません" #. TRANS A socket operation with a specified timeout received no response during #. TRANS the timeout period. -#: sysdeps/gnu/errlist.c:686 +#: sysdeps/gnu/errlist.h:419 msgid "Connection timed out" msgstr "接続がタイムアウトしました" #. TRANS A remote host refused to allow the network connection (typically because #. TRANS it is not running the requested service). -#: sysdeps/gnu/errlist.c:696 +#: sysdeps/gnu/errlist.h:425 msgid "Connection refused" msgstr "接続を拒否されました" #. TRANS Too many levels of symbolic links were encountered in looking up a file name. #. TRANS This often indicates a cycle of symbolic links. -#: sysdeps/gnu/errlist.c:706 +#: sysdeps/gnu/errlist.h:431 msgid "Too many levels of symbolic links" msgstr "シンボリックリンクの階層が多すぎます" #. TRANS Filename too long (longer than @code{PATH_MAX}; @pxref{Limits for #. TRANS Files}) or host name too long (in @code{gethostname} or #. TRANS @code{sethostname}; @pxref{Host Identification}). -#: sysdeps/gnu/errlist.c:717 +#: sysdeps/gnu/errlist.h:438 msgid "File name too long" msgstr "ファイル名が長すぎます" #. TRANS The remote host for a requested network connection is down. -#: sysdeps/gnu/errlist.c:726 +#: sysdeps/gnu/errlist.h:443 msgid "Host is down" msgstr "ホストが落ちています" -#. TRANS The remote host for a requested network connection is not reachable. -#: sysdeps/gnu/errlist.c:735 +#: sysdeps/gnu/errlist.h:448 msgid "No route to host" msgstr "ホストへの経路がありません" #. TRANS Directory not empty, where an empty directory was expected. Typically, #. TRANS this error occurs when you are trying to delete a directory. -#: sysdeps/gnu/errlist.c:745 +#: sysdeps/gnu/errlist.h:454 msgid "Directory not empty" msgstr "ディレクトリは空ではありません" -#. TRANS This means that the per-user limit on new process would be exceeded by -#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on -#. TRANS the @code{RLIMIT_NPROC} limit. -#: sysdeps/gnu/errlist.c:756 -msgid "Too many processes" -msgstr "プロセスが多すぎます" - #. TRANS The file quota system is confused because there are too many users. #. TRANS @c This can probably happen in a GNU system when using NFS. -#: sysdeps/gnu/errlist.c:766 +#: sysdeps/gnu/errlist.h:460 msgid "Too many users" msgstr "ユーザが多すぎます" #. TRANS The user's disk quota was exceeded. -#: sysdeps/gnu/errlist.c:775 +#: sysdeps/gnu/errlist.h:465 msgid "Disk quota exceeded" msgstr "ディスク使用量制限を超過しました" @@ -5606,179 +5283,74 @@ msgstr "ディスク使用量制限を超過しました" #. TRANS already specifies an NFS-mounted file. #. TRANS (This is an error on some operating systems, but we expect it to work #. TRANS properly on @gnuhurdsystems{}, making this error code impossible.) -#: sysdeps/gnu/errlist.c:800 +#: sysdeps/gnu/errlist.h:482 msgid "Object is remote" msgstr "オブジェクトはリモートにあります" -#: sysdeps/gnu/errlist.c:808 -msgid "RPC struct is bad" -msgstr "RPC構造が不正です" - -#: sysdeps/gnu/errlist.c:816 -msgid "RPC version wrong" -msgstr "RPCバージョンが違います" - -#: sysdeps/gnu/errlist.c:824 -msgid "RPC program not available" -msgstr "RPCプログラムは利用できません" - -#: sysdeps/gnu/errlist.c:832 -msgid "RPC program version wrong" -msgstr "RPCプログラムバージョンが違います" - -#: sysdeps/gnu/errlist.c:840 -msgid "RPC bad procedure for program" -msgstr "プログラムに対して不正なRPCの手続きです" - #. TRANS This is used by the file locking facilities; see #. TRANS @ref{File Locks}. This error is never generated by @gnuhurdsystems{}, but #. TRANS it can result from an operation to an NFS server running another #. TRANS operating system. -#: sysdeps/gnu/errlist.c:852 +#: sysdeps/gnu/errlist.h:490 msgid "No locks available" msgstr "ロックが利用できません" -#. TRANS The file was the wrong type for the -#. TRANS operation, or a data file had the wrong format. -#. TRANS -#. TRANS On some systems @code{chmod} returns this error if you try to set the -#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. -#: sysdeps/gnu/errlist.c:865 -msgid "Inappropriate file type or format" -msgstr "不適切なファイル形式かフォーマットです" - -#: sysdeps/gnu/errlist.c:873 -msgid "Authentication error" -msgstr "認証エラーです" - -#: sysdeps/gnu/errlist.c:881 -msgid "Need authenticator" -msgstr "認証者(authenticator)が必要です" - #. TRANS This indicates that the function called is #. TRANS not implemented at all, either in the C library itself or in the #. TRANS operating system. When you get this error, you can be sure that this #. TRANS particular function will always fail with @code{ENOSYS} unless you #. TRANS install a new version of the C library or the operating system. -#: sysdeps/gnu/errlist.c:894 +#: sysdeps/gnu/errlist.h:499 msgid "Function not implemented" msgstr "関数は実装されていません" -#. TRANS A function returns this error when certain parameter -#. TRANS values are valid, but the functionality they request is not available. -#. TRANS This can mean that the function does not implement a particular command -#. TRANS or option value or flag bit at all. For functions that operate on some -#. TRANS object given in a parameter, such as a file descriptor or a port, it -#. TRANS might instead mean that only @emph{that specific object} (file -#. TRANS descriptor, port, etc.) is unable to support the other parameters given; -#. TRANS different file descriptors might support different ranges of parameter -#. TRANS values. -#. TRANS -#. TRANS If the entire function is not available at all in the implementation, -#. TRANS it returns @code{ENOSYS} instead. -#: sysdeps/gnu/errlist.c:914 -msgid "Not supported" -msgstr "サポートされていません" - #. TRANS While decoding a multibyte character the function came along an invalid #. TRANS or an incomplete sequence of bytes or the given wide character is invalid. -#: sysdeps/gnu/errlist.c:924 +#: sysdeps/gnu/errlist.h:505 msgid "Invalid or incomplete multibyte or wide character" msgstr "無効または不完全なマルチバイトまたはワイド文字です" -#. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return -#. TRANS this error for certain operations when the caller is not in the -#. TRANS foreground process group of the terminal. Users do not usually see this -#. TRANS error because functions such as @code{read} and @code{write} translate -#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, -#. TRANS for information on process groups and these signals. -#: sysdeps/gnu/errlist.c:938 -msgid "Inappropriate operation for background process" -msgstr "バックグラウンドプロセスに対する不適切な操作です" - -#. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is -#. TRANS translated by a program and the translator program dies while starting -#. TRANS up, before it has connected to the file. -#: sysdeps/gnu/errlist.c:949 -msgid "Translator died" -msgstr "翻訳用プログラムが死んでいます" - -#. TRANS The experienced user will know what is wrong. -#. TRANS @c This error code is a joke. Its perror text is part of the joke. -#. TRANS @c Don't change it. -#: sysdeps/gnu/errlist.c:960 -msgid "?" -msgstr "?" - -#. TRANS You did @strong{what}? -#: sysdeps/gnu/errlist.c:969 -msgid "You really blew it this time" -msgstr "You really blew it this time" - -#. TRANS Go home and have a glass of warm, dairy-fresh milk. -#. TRANS @c Okay. Since you are dying to know, I'll tell you. -#. TRANS @c This is a joke, obviously. There is a children's song which begins, -#. TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) -#. TRANS @c errno macro EIO, I think about that song. Probably most of my -#. TRANS @c compatriots who program on Unix do, too. One of them must have stayed -#. TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. -#. TRANS @c Whoever did it should be castigated, but it made me laugh. -#. TRANS @c --jtobey@channel1.com -#. TRANS @c -#. TRANS @c "bought the farm" means "died". -jtobey -#. TRANS @c -#. TRANS @c Translators, please do not translate this litteraly, translate it into -#. TRANS @c an idiomatic funny way of saying that the computer died. -#: sysdeps/gnu/errlist.c:991 -msgid "Computer bought the farm" -msgstr "コンピュータが「戦死」しました" - -#. TRANS This error code has no purpose. -#: sysdeps/gnu/errlist.c:1000 -msgid "Gratuitous error" -msgstr "不必要なエラー" - -#: sysdeps/gnu/errlist.c:1008 +#: sysdeps/gnu/errlist.h:508 msgid "Bad message" msgstr "不正なメッセージです" -#: sysdeps/gnu/errlist.c:1016 +#: sysdeps/gnu/errlist.h:511 msgid "Identifier removed" msgstr "識別子を除去しました" -#: sysdeps/gnu/errlist.c:1024 +#: sysdeps/gnu/errlist.h:514 msgid "Multihop attempted" msgstr "多重ホップが企てられました" -#: sysdeps/gnu/errlist.c:1032 +#: sysdeps/gnu/errlist.h:517 msgid "No data available" msgstr "利用可能なデータがありません" -#: sysdeps/gnu/errlist.c:1040 +#: sysdeps/gnu/errlist.h:520 msgid "Link has been severed" msgstr "リンクが切れています" -#: sysdeps/gnu/errlist.c:1048 +#: sysdeps/gnu/errlist.h:523 msgid "No message of desired type" msgstr "要求した形式のメッセージはありません" -#: sysdeps/gnu/errlist.c:1056 +#: sysdeps/gnu/errlist.h:526 msgid "Out of streams resources" msgstr "ストリームリソース外です" -#: sysdeps/gnu/errlist.c:1064 +#: sysdeps/gnu/errlist.h:529 msgid "Device not a stream" msgstr "デバイスはストリーム型ではありません" -#: sysdeps/gnu/errlist.c:1072 +#: sysdeps/gnu/errlist.h:532 msgid "Value too large for defined data type" msgstr "定義されたデータ型に対して値が大きすぎます" -#: sysdeps/gnu/errlist.c:1080 +#: sysdeps/gnu/errlist.h:535 msgid "Protocol error" msgstr "プロトコルエラー" -#: sysdeps/gnu/errlist.c:1088 +#: sysdeps/gnu/errlist.h:538 msgid "Timer expired" msgstr "タイマが破棄されました" @@ -5786,195 +5358,312 @@ msgstr "タイマが破棄されました" #. TRANS completed. @xref{Asynchronous I/O}. When you call @code{aio_cancel}, #. TRANS the normal result is for the operations affected to complete with this #. TRANS error; @pxref{Cancel AIO Operations}. -#: sysdeps/gnu/errlist.c:1100 +#: sysdeps/gnu/errlist.h:546 msgid "Operation canceled" msgstr "操作は中断されました" -#: sysdeps/gnu/errlist.c:1108 +#: sysdeps/gnu/errlist.h:549 msgid "Owner died" msgstr "所有者が無くなりました" -#: sysdeps/gnu/errlist.c:1116 +#: sysdeps/gnu/errlist.h:552 msgid "State not recoverable" msgstr "状態の復帰が出来ません" -#: sysdeps/gnu/errlist.c:1124 +#: sysdeps/gnu/errlist.h:555 msgid "Interrupted system call should be restarted" msgstr "割り込まれたシステムコールは再スタートさせるべきです" -#: sysdeps/gnu/errlist.c:1132 +#: sysdeps/gnu/errlist.h:558 msgid "Channel number out of range" msgstr "チャンネル番号が範囲外です" -#: sysdeps/gnu/errlist.c:1140 +#: sysdeps/gnu/errlist.h:561 msgid "Level 2 not synchronized" msgstr "レベル2は同期していません" -#: sysdeps/gnu/errlist.c:1148 +#: sysdeps/gnu/errlist.h:564 msgid "Level 3 halted" msgstr "レベル3停止" -#: sysdeps/gnu/errlist.c:1156 +#: sysdeps/gnu/errlist.h:567 msgid "Level 3 reset" msgstr "レベル3はリセットしました" -#: sysdeps/gnu/errlist.c:1164 +#: sysdeps/gnu/errlist.h:570 msgid "Link number out of range" msgstr "リンク数が範囲外です" -#: sysdeps/gnu/errlist.c:1172 +#: sysdeps/gnu/errlist.h:573 msgid "Protocol driver not attached" msgstr "プロトコルドライバがアタッチされていません" -#: sysdeps/gnu/errlist.c:1180 +#: sysdeps/gnu/errlist.h:576 msgid "No CSI structure available" msgstr "CSI 構造が利用できません" -#: sysdeps/gnu/errlist.c:1188 +#: sysdeps/gnu/errlist.h:579 msgid "Level 2 halted" msgstr "レベル2停止" -#: sysdeps/gnu/errlist.c:1196 +#: sysdeps/gnu/errlist.h:582 msgid "Invalid exchange" msgstr "無効な交換です" -#: sysdeps/gnu/errlist.c:1204 +#: sysdeps/gnu/errlist.h:585 msgid "Invalid request descriptor" msgstr "無効なリクエスト記述子です" -#: sysdeps/gnu/errlist.c:1212 +#: sysdeps/gnu/errlist.h:588 msgid "Exchange full" msgstr "Exchange full" -#: sysdeps/gnu/errlist.c:1220 +#: sysdeps/gnu/errlist.h:591 msgid "No anode" msgstr "アノードがありません" -#: sysdeps/gnu/errlist.c:1228 +#: sysdeps/gnu/errlist.h:594 msgid "Invalid request code" msgstr "無効なリクエストコードです" -#: sysdeps/gnu/errlist.c:1236 +#: sysdeps/gnu/errlist.h:597 msgid "Invalid slot" msgstr "無効なスロットです" -#: sysdeps/gnu/errlist.c:1244 -msgid "File locking deadlock error" -msgstr "ファイルロックのデッドロックエラーです" - -#: sysdeps/gnu/errlist.c:1252 +#: sysdeps/gnu/errlist.h:600 msgid "Bad font file format" msgstr "不正なフォントファイル形式です" -#: sysdeps/gnu/errlist.c:1260 +#: sysdeps/gnu/errlist.h:603 msgid "Machine is not on the network" msgstr "マシンはネットワークにつながっていません" -#: sysdeps/gnu/errlist.c:1268 +#: sysdeps/gnu/errlist.h:606 msgid "Package not installed" msgstr "パッケージはインストールされていません" -#: sysdeps/gnu/errlist.c:1276 +#: sysdeps/gnu/errlist.h:609 msgid "Advertise error" msgstr "Advertiseエラー" -#: sysdeps/gnu/errlist.c:1284 +#: sysdeps/gnu/errlist.h:612 msgid "Srmount error" msgstr "Srmount エラー" -#: sysdeps/gnu/errlist.c:1292 +#: sysdeps/gnu/errlist.h:615 msgid "Communication error on send" msgstr "送信中の通信エラー" -#: sysdeps/gnu/errlist.c:1300 +#: sysdeps/gnu/errlist.h:618 msgid "RFS specific error" msgstr "RFS特定エラー" -#: sysdeps/gnu/errlist.c:1308 +#: sysdeps/gnu/errlist.h:621 msgid "Name not unique on network" msgstr "名前がネットワーク上で重複しています" -#: sysdeps/gnu/errlist.c:1316 +#: sysdeps/gnu/errlist.h:624 msgid "File descriptor in bad state" msgstr "ファイル記述子が不正の状態にあります" -#: sysdeps/gnu/errlist.c:1324 +#: sysdeps/gnu/errlist.h:627 msgid "Remote address changed" msgstr "遠隔アドレスが変更されました" -#: sysdeps/gnu/errlist.c:1332 +#: sysdeps/gnu/errlist.h:630 msgid "Can not access a needed shared library" msgstr "必要な共有ライブラリにアクセスできません" -#: sysdeps/gnu/errlist.c:1340 +#: sysdeps/gnu/errlist.h:633 msgid "Accessing a corrupted shared library" msgstr "壊れた共有ライブラリにアクセスしています" -#: sysdeps/gnu/errlist.c:1348 +#: sysdeps/gnu/errlist.h:636 msgid ".lib section in a.out corrupted" msgstr "a.out 中の .lib セクションが壊れています" -#: sysdeps/gnu/errlist.c:1356 +#: sysdeps/gnu/errlist.h:639 msgid "Attempting to link in too many shared libraries" msgstr "あまりに多過ぎる共有ライブラリへリンクしようとしています" -#: sysdeps/gnu/errlist.c:1364 +#: sysdeps/gnu/errlist.h:642 msgid "Cannot exec a shared library directly" msgstr "共有ライブラリは直接実行できません" -#: sysdeps/gnu/errlist.c:1372 +#: sysdeps/gnu/errlist.h:645 msgid "Streams pipe error" msgstr "ストリームパイプエラー" -#: sysdeps/gnu/errlist.c:1380 +#: sysdeps/gnu/errlist.h:648 msgid "Structure needs cleaning" msgstr "構造体を内容消去する必要があります" -#: sysdeps/gnu/errlist.c:1388 +#: sysdeps/gnu/errlist.h:651 msgid "Not a XENIX named type file" msgstr "XENIX の名前付きファイルではありません" -#: sysdeps/gnu/errlist.c:1396 +#: sysdeps/gnu/errlist.h:654 msgid "No XENIX semaphores available" msgstr "XENIX セマフォが利用できません" -#: sysdeps/gnu/errlist.c:1404 +#: sysdeps/gnu/errlist.h:657 msgid "Is a named type file" msgstr "名前付きファイルです" -#: sysdeps/gnu/errlist.c:1412 +#: sysdeps/gnu/errlist.h:660 msgid "Remote I/O error" msgstr "遠隔I/Oエラーです" -#: sysdeps/gnu/errlist.c:1420 +#: sysdeps/gnu/errlist.h:663 msgid "No medium found" msgstr "メディアが見つかりません" -#: sysdeps/gnu/errlist.c:1428 +#: sysdeps/gnu/errlist.h:666 msgid "Wrong medium type" msgstr "不正なメディア形式です" -#: sysdeps/gnu/errlist.c:1436 +#: sysdeps/gnu/errlist.h:669 msgid "Required key not available" msgstr "要求されたキーが利用できません" -#: sysdeps/gnu/errlist.c:1444 +#: sysdeps/gnu/errlist.h:672 msgid "Key has expired" msgstr "キーが期限切れです" -#: sysdeps/gnu/errlist.c:1452 +#: sysdeps/gnu/errlist.h:675 msgid "Key has been revoked" msgstr "キーが破棄されています" -#: sysdeps/gnu/errlist.c:1460 +#: sysdeps/gnu/errlist.h:678 msgid "Key was rejected by service" msgstr "キーがサービスによって拒否されました" -#: sysdeps/gnu/errlist.c:1468 +#: sysdeps/gnu/errlist.h:681 msgid "Operation not possible due to RF-kill" msgstr "RF-kill のため操作は不可能です" -#: sysdeps/mach/_strerror.c:56 +#: sysdeps/gnu/errlist.h:687 +msgid "RPC struct is bad" +msgstr "RPC構造が不正です" + +#. TRANS The file was the wrong type for the +#. TRANS operation, or a data file had the wrong format. +#. TRANS +#. TRANS On some systems @code{chmod} returns this error if you try to set the +#. TRANS sticky bit on a non-directory file; @pxref{Setting Permissions}. +#: sysdeps/gnu/errlist.h:696 +msgid "Inappropriate file type or format" +msgstr "不適切なファイル形式かフォーマットです" + +#: sysdeps/gnu/errlist.h:699 +msgid "RPC bad procedure for program" +msgstr "プログラムに対して不正なRPCの手続きです" + +#: sysdeps/gnu/errlist.h:702 +msgid "Authentication error" +msgstr "認証エラーです" + +#. TRANS On @gnuhurdsystems{}, opening a file returns this error when the file is +#. TRANS translated by a program and the translator program dies while starting +#. TRANS up, before it has connected to the file. +#: sysdeps/gnu/errlist.h:709 +msgid "Translator died" +msgstr "翻訳用プログラムが死んでいます" + +#: sysdeps/gnu/errlist.h:712 +msgid "RPC version wrong" +msgstr "RPCバージョンが違います" + +#. TRANS You did @strong{what}? +#: sysdeps/gnu/errlist.h:717 +msgid "You really blew it this time" +msgstr "You really blew it this time" + +#. TRANS This means that the per-user limit on new process would be exceeded by +#. TRANS an attempted @code{fork}. @xref{Limits on Resources}, for details on +#. TRANS the @code{RLIMIT_NPROC} limit. +#: sysdeps/gnu/errlist.h:724 +msgid "Too many processes" +msgstr "プロセスが多すぎます" + +#. TRANS This error code has no purpose. +#: sysdeps/gnu/errlist.h:729 +msgid "Gratuitous error" +msgstr "不必要なエラー" + +#. TRANS A function returns this error when certain parameter +#. TRANS values are valid, but the functionality they request is not available. +#. TRANS This can mean that the function does not implement a particular command +#. TRANS or option value or flag bit at all. For functions that operate on some +#. TRANS object given in a parameter, such as a file descriptor or a port, it +#. TRANS might instead mean that only @emph{that specific object} (file +#. TRANS descriptor, port, etc.) is unable to support the other parameters given; +#. TRANS different file descriptors might support different ranges of parameter +#. TRANS values. +#. TRANS +#. TRANS If the entire function is not available at all in the implementation, +#. TRANS it returns @code{ENOSYS} instead. +#: sysdeps/gnu/errlist.h:745 +msgid "Not supported" +msgstr "サポートされていません" + +#: sysdeps/gnu/errlist.h:748 +msgid "RPC program version wrong" +msgstr "RPCプログラムバージョンが違います" + +#. TRANS On @gnuhurdsystems{}, servers supporting the @code{term} protocol return +#. TRANS this error for certain operations when the caller is not in the +#. TRANS foreground process group of the terminal. Users do not usually see this +#. TRANS error because functions such as @code{read} and @code{write} translate +#. TRANS it into a @code{SIGTTIN} or @code{SIGTTOU} signal. @xref{Job Control}, +#. TRANS for information on process groups and these signals. +#: sysdeps/gnu/errlist.h:758 +msgid "Inappropriate operation for background process" +msgstr "バックグラウンドプロセスに対する不適切な操作です" + +#. TRANS Go home and have a glass of warm, dairy-fresh milk. +#. TRANS @c Okay. Since you are dying to know, I'll tell you. +#. TRANS @c This is a joke, obviously. There is a children's song which begins, +#. TRANS @c "Old McDonald had a farm, e-i-e-i-o." Every time I see the (real) +#. TRANS @c errno macro EIO, I think about that song. Probably most of my +#. TRANS @c compatriots who program on Unix do, too. One of them must have stayed +#. TRANS @c up a little too late one night and decided to add it to Hurd or Glibc. +#. TRANS @c Whoever did it should be castigated, but it made me laugh. +#. TRANS @c --jtobey@channel1.com +#. TRANS @c +#. TRANS @c "bought the farm" means "died". -jtobey +#. TRANS @c +#. TRANS @c Translators, please do not translate this litteraly, translate it into +#. TRANS @c an idiomatic funny way of saying that the computer died. +#: sysdeps/gnu/errlist.h:776 +msgid "Computer bought the farm" +msgstr "コンピュータが「戦死」しました" + +#. TRANS In @theglibc{}, this is another name for @code{EAGAIN} (above). +#. TRANS The values are always the same, on every operating system. +#. TRANS +#. TRANS C libraries in many older Unix systems have @code{EWOULDBLOCK} as a +#. TRANS separate error code. +#: sysdeps/gnu/errlist.h:785 +msgid "Operation would block" +msgstr "ブロックされうる操作です" + +#: sysdeps/gnu/errlist.h:788 +msgid "Need authenticator" +msgstr "認証者(authenticator)が必要です" + +#. TRANS The experienced user will know what is wrong. +#. TRANS @c This error code is a joke. Its perror text is part of the joke. +#. TRANS @c Don't change it. +#: sysdeps/gnu/errlist.h:795 +msgid "?" +msgstr "?" + +#: sysdeps/gnu/errlist.h:798 +msgid "RPC program not available" +msgstr "RPCプログラムは利用できません" + +#: sysdeps/mach/_strerror.c:43 msgid "Error in unknown error system: " msgstr "不明なエラーシステムでのエラー:" @@ -6080,210 +5769,202 @@ msgstr "`%s'のヘッダーを読めません" msgid "%s: warning: zone \"%s\" abbreviation \"%s\" %s\n" msgstr "%s: 警告: ゾーン \"%s\" 省略形 \"%s\" %s\n" -#: timezone/zic.c:429 +#: timezone/zic.c:432 #, c-format msgid "%s: Memory exhausted: %s\n" msgstr "%s: メモリが足りません: %s\n" -#: timezone/zic.c:551 +#: timezone/zic.c:554 #, c-format msgid "warning: " msgstr "警告: " -#: timezone/zic.c:652 +#: timezone/zic.c:730 #, c-format msgid "%s: More than one -d option specified\n" msgstr "%s: -d オプションが複数指定されています\n" -#: timezone/zic.c:662 +#: timezone/zic.c:740 #, c-format msgid "%s: More than one -l option specified\n" msgstr "%s: -l オプションが複数指定されています\n" -#: timezone/zic.c:672 +#: timezone/zic.c:750 #, c-format msgid "%s: More than one -p option specified\n" msgstr "%s: -p オプションが複数指定されています\n" -#: timezone/zic.c:693 +#: timezone/zic.c:771 #, c-format msgid "%s: More than one -y option specified\n" msgstr "%s: -y オプションが複数指定されています\n" -#: timezone/zic.c:703 +#: timezone/zic.c:781 #, c-format msgid "%s: More than one -L option specified\n" msgstr "%s: -L オプションが複数指定されています\n" -#: timezone/zic.c:1032 timezone/zic.c:1034 +#: timezone/zic.c:1122 timezone/zic.c:1124 msgid "same rule name in multiple files" msgstr "複数ファイルに同じルール名があります" -#: timezone/zic.c:1101 +#: timezone/zic.c:1191 msgid "standard input" msgstr "標準入力" -#: timezone/zic.c:1106 +#: timezone/zic.c:1196 #, c-format msgid "%s: Can't open %s: %s\n" msgstr "%s: %sを開けません: %s\n" -#: timezone/zic.c:1117 +#: timezone/zic.c:1207 msgid "line too long" msgstr "行が長すぎます" -#: timezone/zic.c:1139 +#: timezone/zic.c:1230 msgid "input line of unknown type" msgstr "不明な形式の入力行です" -#: timezone/zic.c:1158 timezone/zic.c:1593 timezone/zic.c:1615 +#: timezone/zic.c:1253 timezone/zic.c:1699 timezone/zic.c:1721 #, c-format msgid "%s: panic: Invalid l_value %d\n" msgstr "%s: パニック: 無効な l_value %d です\n" -#: timezone/zic.c:1167 +#: timezone/zic.c:1262 msgid "expected continuation line not found" msgstr "継続行が期待されましたが見つかりません" -#: timezone/zic.c:1221 timezone/zic.c:3078 +#: timezone/zic.c:1316 timezone/zic.c:3282 msgid "time overflow" msgstr "時間オーバーフロー" -#: timezone/zic.c:1227 +#: timezone/zic.c:1322 msgid "values over 24 hours not handled by pre-2007 versions of zic" msgstr "2007 以前のバージョンの zic では24時間を超える値は扱えません" -#: timezone/zic.c:1245 +#: timezone/zic.c:1340 msgid "invalid saved time" msgstr "不正な保存時刻です" -#: timezone/zic.c:1256 +#: timezone/zic.c:1351 msgid "wrong number of fields on Rule line" msgstr "Rule行のフィールド数が間違っています" -#: timezone/zic.c:1287 +#: timezone/zic.c:1382 msgid "wrong number of fields on Zone line" msgstr "Zone行のフィールド数が間違っています" -#: timezone/zic.c:1292 +#: timezone/zic.c:1387 #, c-format msgid "\"Zone %s\" line and -l option are mutually exclusive" msgstr "\"Zone %s\"行と -l オプションは同時指定できません" -#: timezone/zic.c:1298 +#: timezone/zic.c:1393 #, c-format msgid "\"Zone %s\" line and -p option are mutually exclusive" msgstr "\"Zone %s\"行と -p オプションは同時指定できません" -#: timezone/zic.c:1319 +#: timezone/zic.c:1414 msgid "wrong number of fields on Zone continuation line" msgstr "Zone continuation行のフィールド数が間違っています" -#: timezone/zic.c:1363 +#: timezone/zic.c:1458 msgid "invalid abbreviation format" msgstr "無効な省略形です" -#: timezone/zic.c:1399 +#: timezone/zic.c:1494 msgid "Zone continuation line end time is not after end time of previous line" msgstr "ゾーン連続行 end time は前の行の end time よりも後であってはなりません" -#: timezone/zic.c:1426 -msgid "wrong number of fields on Leap line" -msgstr "Leap行のフィールド数が間違っています" - -#: timezone/zic.c:1435 +#: timezone/zic.c:1526 msgid "invalid leaping year" msgstr "無効なうるう年です" -#: timezone/zic.c:1455 timezone/zic.c:1547 +#: timezone/zic.c:1548 timezone/zic.c:1653 msgid "invalid month name" msgstr "無効なな月名です" -#: timezone/zic.c:1468 timezone/zic.c:1663 timezone/zic.c:1677 +#: timezone/zic.c:1561 timezone/zic.c:1769 timezone/zic.c:1783 msgid "invalid day of month" msgstr "一月あたりの日にちが無効です" -#: timezone/zic.c:1473 +#: timezone/zic.c:1566 msgid "time too small" msgstr "時刻が小さすぎます" -#: timezone/zic.c:1477 +#: timezone/zic.c:1570 msgid "time too large" msgstr "時刻が大きすぎます" -#: timezone/zic.c:1481 timezone/zic.c:1576 +#: timezone/zic.c:1574 timezone/zic.c:1682 msgid "invalid time of day" msgstr "1日あたりの時間が無効です" -#: timezone/zic.c:1494 -msgid "illegal CORRECTION field on Leap line" -msgstr "Leap 行に不正な CORRECTION フィールドがあります" - -#: timezone/zic.c:1499 -msgid "illegal Rolling/Stationary field on Leap line" -msgstr "Leap 行に不正な Rolling/Stationary フィールドがあります" +#: timezone/zic.c:1585 +msgid "wrong number of fields on Leap line" +msgstr "Leap行のフィールド数が間違っています" -#: timezone/zic.c:1518 +#: timezone/zic.c:1624 msgid "wrong number of fields on Link line" msgstr "Link行のフィールド数が間違っています" -#: timezone/zic.c:1522 +#: timezone/zic.c:1628 msgid "blank FROM field on Link line" msgstr "Link 行の FROM フィールドが空欄です" -#: timezone/zic.c:1597 +#: timezone/zic.c:1703 msgid "invalid starting year" msgstr "無効な開始年です" -#: timezone/zic.c:1619 +#: timezone/zic.c:1725 msgid "invalid ending year" msgstr "無効な終了年です" -#: timezone/zic.c:1623 +#: timezone/zic.c:1729 msgid "starting year greater than ending year" msgstr "開始年が終了年より大きくなっています" -#: timezone/zic.c:1668 +#: timezone/zic.c:1774 msgid "invalid weekday name" msgstr "無効な曜日名です" -#: timezone/zic.c:2488 +#: timezone/zic.c:2673 msgid "no POSIX environment variable for zone" msgstr "ゾーン用の POSIX 環境変数ではありません" -#: timezone/zic.c:2696 +#: timezone/zic.c:2889 msgid "can't determine time zone abbreviation to use just after until time" msgstr "ちょうどその時刻を使用するタイムゾーンの省略形を決定できません" -#: timezone/zic.c:2785 +#: timezone/zic.c:2987 msgid "too many local time types" msgstr "ローカル時間形式が多すぎます" -#: timezone/zic.c:2813 +#: timezone/zic.c:3005 msgid "too many leap seconds" msgstr "うるう秒が大きすぎます" -#: timezone/zic.c:2891 +#: timezone/zic.c:3095 msgid "Wild result from command execution" msgstr "コマンド実行からの粗い結果" -#: timezone/zic.c:2892 +#: timezone/zic.c:3096 #, c-format msgid "%s: command was '%s', result was %d\n" msgstr "%s: コマンドは'%s', 結果は %dでした\n" -#: timezone/zic.c:3063 +#: timezone/zic.c:3267 msgid "Odd number of quotation marks" msgstr "クォートするマークが奇数個分しかありません" -#: timezone/zic.c:3157 +#: timezone/zic.c:3361 msgid "use of 2/29 in non leap-year" msgstr "うるう年ではないのに2/29を使っています" -#: timezone/zic.c:3223 +#: timezone/zic.c:3427 msgid "time zone abbreviation differs from POSIX standard" msgstr "タイムゾーン省略名が POSIX 標準と異なります" -#: timezone/zic.c:3229 +#: timezone/zic.c:3433 msgid "too many, or too long, time zone abbreviations" msgstr "タイムゾーン省略名が多すぎるか長すぎます" -- cgit 1.4.1