From 0f8bbd69cd95c8350571763d15554b9bc3c62226 Mon Sep 17 00:00:00 2001 From: Joseph Myers Date: Fri, 24 Feb 2012 21:42:53 +0000 Subject: Update texinfo.tex to version 2012-01-19.16. --- manual/texinfo.tex | 2837 +++++++++++++++++++++++++++++++++++----------------- 1 file changed, 1913 insertions(+), 924 deletions(-) (limited to 'manual') diff --git a/manual/texinfo.tex b/manual/texinfo.tex index c49e670b02..928cc286f9 100644 --- a/manual/texinfo.tex +++ b/manual/texinfo.tex @@ -3,11 +3,11 @@ % Load plain if necessary, i.e., if running under initex. \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi % -\def\texinfoversion{2007-09-03.05} +\def\texinfoversion{2012-01-19.16} % -% Copyright (C) 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, 2007, +% Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995, % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, -% 2007 Free Software Foundation, Inc. +% 2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc. % % This texinfo.tex file is free software: you can redistribute it and/or % modify it under the terms of the GNU General Public License as @@ -65,7 +65,6 @@ \everyjob{\message{[Texinfo version \texinfoversion]}% \catcode`+=\active \catcode`\_=\active} - \chardef\other=12 % We never want plain's \outer definition of \+ in Texinfo. @@ -93,10 +92,13 @@ \let\ptexnewwrite\newwrite \let\ptexnoindent=\noindent \let\ptexplus=+ +\let\ptexraggedright=\raggedright \let\ptexrbrace=\} \let\ptexslash=\/ \let\ptexstar=\* \let\ptext=\t +\let\ptextop=\top +{\catcode`\'=\active \global\let\ptexquoteright'}% active in plain's math mode % If this character appears in an error message or help string, it % starts a new line in the output. @@ -114,10 +116,11 @@ % Set up fixed words for English if not already set. \ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi \ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi +\ifx\putworderror\undefined \gdef\putworderror{error}\fi \ifx\putwordfile\undefined \gdef\putwordfile{file}\fi \ifx\putwordin\undefined \gdef\putwordin{in}\fi -\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi -\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi +\ifx\putwordIndexIsEmpty\undefined \gdef\putwordIndexIsEmpty{(Index is empty)}\fi +\ifx\putwordIndexNonexistent\undefined \gdef\putwordIndexNonexistent{(Index is nonexistent)}\fi \ifx\putwordInfo\undefined \gdef\putwordInfo{Info}\fi \ifx\putwordInstanceVariableof\undefined \gdef\putwordInstanceVariableof{Instance Variable of}\fi \ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi @@ -156,15 +159,18 @@ \def\spaceisspace{\catcode`\ =\spacecat} % sometimes characters are active, so we need control sequences. +\chardef\ampChar = `\& \chardef\colonChar = `\: \chardef\commaChar = `\, \chardef\dashChar = `\- \chardef\dotChar = `\. \chardef\exclamChar= `\! +\chardef\hashChar = `\# \chardef\lquoteChar= `\` \chardef\questChar = `\? \chardef\rquoteChar= `\' \chardef\semiChar = `\; +\chardef\slashChar = `\/ \chardef\underChar = `\_ % Ignore a token. @@ -195,36 +201,7 @@ % that mark overfull boxes (in case you have decided % that the text looks ok even though it passes the margin). % -\def\finalout{\overfullrule=0pt} - -% @| inserts a changebar to the left of the current line. It should -% surround any changed text. This approach does *not* work if the -% change spans more than two lines of output. To handle that, we would -% have adopt a much more difficult approach (putting marks into the main -% vertical list for the beginning and end of each change). -% -\def\|{% - % \vadjust can only be used in horizontal mode. - \leavevmode - % - % Append this vertical mode material after the current line in the output. - \vadjust{% - % We want to insert a rule with the height and depth of the current - % leading; that is exactly what \strutbox is supposed to record. - \vskip-\baselineskip - % - % \vadjust-items are inserted at the left edge of the type. So - % the \llap here moves out into the left-hand margin. - \llap{% - % - % For a thicker or thinner bar, change the `1pt'. - \vrule height\baselineskip width1pt - % - % This is the space between the bar and the text. - \hskip 12pt - }% - }% -} +\def\finalout{\overfullrule=0pt } % Sometimes it is convenient to have everything in the transcript file % and nothing on the terminal. We don't just call \tracingall here, @@ -242,7 +219,7 @@ \tracingmacros2 \tracingrestores1 \showboxbreadth\maxdimen \showboxdepth\maxdimen - \ifx\eTeXversion\undefined\else % etex gives us more logging + \ifx\eTeXversion\thisisundefined\else % etex gives us more logging \tracingscantokens1 \tracingifs1 \tracinggroups1 @@ -253,6 +230,13 @@ \errorcontextlines16 }% +% @errormsg{MSG}. Do the index-like expansions on MSG, but if things +% aren't perfect, it's not the end of the world, being an error message, +% after all. +% +\def\errormsg{\begingroup \indexnofonts \doerrormsg} +\def\doerrormsg#1{\errmessage{#1}} + % add check for \lastpenalty to plain's definitions. If the last thing % we did was a \nobreak, we don't want to insert more space. % @@ -263,7 +247,6 @@ \def\bigbreak{\ifnum\lastpenalty<10000\par\ifdim\lastskip<\bigskipamount \removelastskip\penalty-200\bigskip\fi\fi} -% For @cropmarks command. % Do @cropmarks to get crop marks. % \newif\ifcropmarks @@ -354,7 +337,7 @@ % We don't want .vr (or whatever) entries like this: % \entry{{\tt \indexbackslash }acronym}{32}{\code {\acronym}} % "\acronym" won't work when it's read back in; - % it needs to be + % it needs to be % {\code {{\tt \backslashcurfont }acronym} \shipout\vbox{% % Do this early so pdf references go to the beginning of the page. @@ -460,7 +443,7 @@ \def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm} \def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm} -% Each occurence of `\^^M' or `\^^M' is replaced by a single space. +% Each occurrence of `\^^M' or `\^^M' is replaced by a single space. % % \argremovec might leave us with trailing space, e.g., % @end itemize @c foo @@ -485,7 +468,7 @@ % to get _exactly_ the rest of the line, we had to prevent such situation. % We prepended an \empty token at the very beginning and we expand it now, % just before passing the control to \argtorun. -% (Similarily, we have to think about #3 of \argcheckspacesY above: it is +% (Similarly, we have to think about #3 of \argcheckspacesY above: it is % either the null string, or it ends with \^^M---thus there is no danger % that a pair of braces would be stripped. % @@ -542,12 +525,12 @@ % used to check whether the current environment is the one expected. % % Non-false conditionals (@iftex, @ifset) don't fit into this, so they -% are not treated as enviroments; they don't open a group. (The +% are not treated as environments; they don't open a group. (The % implementation of @end takes care not to call \endgroup in this % special case.) -% At runtime, environments start with this: +% At run-time, environments start with this: \def\startenvironment#1{\begingroup\def\thisenv{#1}} % initialize \let\thisenv\empty @@ -565,7 +548,7 @@ \fi } -% Evironment mismatch, #1 expected: +% Environment mismatch, #1 expected: \def\badenverr{% \errhelp = \EMsimple \errmessage{This command can appear only \inenvironment\temp, @@ -573,7 +556,7 @@ } \def\inenvironment#1{% \ifx#1\empty - out of any environment% + outside of any environment% \else in environment \expandafter\string#1% \fi @@ -585,7 +568,7 @@ \parseargdef\end{% \if 1\csname iscond.#1\endcsname \else - % The general wording of \badenverr may not be ideal, but... --kasal, 06nov03 + % The general wording of \badenverr may not be ideal. \expandafter\checkenv\csname#1\endcsname \csname E#1\endcsname \endgroup @@ -595,85 +578,6 @@ \newhelp\EMsimple{Press RETURN to continue.} -%% Simple single-character @ commands - -% @@ prints an @ -% Kludge this until the fonts are right (grr). -\def\@{{\tt\char64}} - -% This is turned off because it was never documented -% and you can use @w{...} around a quote to suppress ligatures. -%% Define @` and @' to be the same as ` and ' -%% but suppressing ligatures. -%\def\`{{`}} -%\def\'{{'}} - -% Used to generate quoted braces. -\def\mylbrace {{\tt\char123}} -\def\myrbrace {{\tt\char125}} -\let\{=\mylbrace -\let\}=\myrbrace -\begingroup - % Definitions to produce \{ and \} commands for indices, - % and @{ and @} for the aux/toc files. - \catcode`\{ = \other \catcode`\} = \other - \catcode`\[ = 1 \catcode`\] = 2 - \catcode`\! = 0 \catcode`\\ = \other - !gdef!lbracecmd[\{]% - !gdef!rbracecmd[\}]% - !gdef!lbraceatcmd[@{]% - !gdef!rbraceatcmd[@}]% -!endgroup - -% @comma{} to avoid , parsing problems. -\let\comma = , - -% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent -% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. -\let\, = \c -\let\dotaccent = \. -\def\ringaccent#1{{\accent23 #1}} -\let\tieaccent = \t -\let\ubaraccent = \b -\let\udotaccent = \d - -% Other special characters: @questiondown @exclamdown @ordf @ordm -% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. -\def\questiondown{?`} -\def\exclamdown{!`} -\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} -\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} - -% Dotless i and dotless j, used for accents. -\def\imacro{i} -\def\jmacro{j} -\def\dotless#1{% - \def\temp{#1}% - \ifx\temp\imacro \ptexi - \else\ifx\temp\jmacro \j - \else \errmessage{@dotless can be used only with i or j}% - \fi\fi -} - -% The \TeX{} logo, as in plain, but resetting the spacing so that a -% period following counts as ending a sentence. (Idea found in latex.) -% -\edef\TeX{\TeX \spacefactor=1000 } - -% @LaTeX{} logo. Not quite the same results as the definition in -% latex.ltx, since we use a different font for the raised A; it's most -% convenient for us to use an explicitly smaller font, rather than using -% the \scriptstyle font (since we don't reset \scriptstyle and -% \scriptscriptstyle). -% -\def\LaTeX{% - L\kern-.36em - {\setbox0=\hbox{T}% - \vbox to \ht0{\hbox{\selectfonts\lllsize A}\vss}}% - \kern-.15em - \TeX -} - % Be sure we're in horizontal mode when doing a tie, since we make space % equivalent to this in @example-like environments. Otherwise, a space % at the beginning of a line will start with \penalty -- and @@ -705,7 +609,7 @@ \def\?{?\spacefactor=\endofsentencespacefactor\space} % @frenchspacing on|off says whether to put extra space after punctuation. -% +% \def\onword{on} \def\offword{off} % @@ -715,7 +619,7 @@ \else\ifx\temp\offword \plainnonfrenchspacing \else \errhelp = \EMsimple - \errmessage{Unknown @frenchspacing option `\temp', must be on/off}% + \errmessage{Unknown @frenchspacing option `\temp', must be on|off}% \fi\fi } @@ -797,15 +701,6 @@ where each line of input produces a line of output.} \newdimen\mil \mil=0.001in -% Old definition--didn't work. -%\parseargdef\need{\par % -%% This method tries to make TeX break the page naturally -%% if the depth of the box does not fit. -%{\baselineskip=0pt% -%\vtop to #1\mil{\vfil}\kern -#1\mil\nobreak -%\prevdepth=-1000pt -%}} - \parseargdef\need{% % Ensure vertical mode, so we don't make a big box in the middle of a % paragraph. @@ -869,7 +764,7 @@ where each line of input produces a line of output.} % @inmargin{WHICH}{TEXT} puts TEXT in the WHICH margin next to the current % paragraph. For more general purposes, use the \margin insertion -% class. WHICH is `l' or `r'. +% class. WHICH is `l' or `r'. Not documented, written for gawk manual. % \newskip\inmarginspacing \inmarginspacing=1cm \def\strutdepth{\dp\strutbox} @@ -916,15 +811,51 @@ where each line of input produces a line of output.} \temp } -% @include file insert text of that file as input. +% @| inserts a changebar to the left of the current line. It should +% surround any changed text. This approach does *not* work if the +% change spans more than two lines of output. To handle that, we would +% have adopt a much more difficult approach (putting marks into the main +% vertical list for the beginning and end of each change). This command +% is not documented, not supported, and doesn't work. +% +\def\|{% + % \vadjust can only be used in horizontal mode. + \leavevmode + % + % Append this vertical mode material after the current line in the output. + \vadjust{% + % We want to insert a rule with the height and depth of the current + % leading; that is exactly what \strutbox is supposed to record. + \vskip-\baselineskip + % + % \vadjust-items are inserted at the left edge of the type. So + % the \llap here moves out into the left-hand margin. + \llap{% + % + % For a thicker or thinner bar, change the `1pt'. + \vrule height\baselineskip width1pt + % + % This is the space between the bar and the text. + \hskip 12pt + }% + }% +} + +% @include FILE -- \input text of FILE. % \def\include{\parseargusing\filenamecatcodes\includezzz} \def\includezzz#1{% \pushthisfilestack \def\thisfile{#1}% {% - \makevalueexpandable - \def\temp{\input #1 }% + \makevalueexpandable % we want to expand any @value in FILE. + \turnoffactive % and allow special characters in the expansion + \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @include of #1^^J}% + \edef\temp{\noexpand\input #1 }% + % + % This trickery is to read FILE outside of a group, in case it makes + % definitions, etc. \expandafter }\temp \popthisfilestack @@ -939,6 +870,8 @@ where each line of input produces a line of output.} \catcode`>=\other \catcode`+=\other \catcode`-=\other + \catcode`\`=\other + \catcode`\'=\other } \def\pushthisfilestack{% @@ -1084,95 +1017,6 @@ where each line of input produces a line of output.} } -% @asis just yields its argument. Used with @table, for example. -% -\def\asis#1{#1} - -% @math outputs its argument in math mode. -% -% One complication: _ usually means subscripts, but it could also mean -% an actual _ character, as in @math{@var{some_variable} + 1}. So make -% _ active, and distinguish by seeing if the current family is \slfam, -% which is what @var uses. -{ - \catcode`\_ = \active - \gdef\mathunderscore{% - \catcode`\_=\active - \def_{\ifnum\fam=\slfam \_\else\sb\fi}% - } -} -% Another complication: we want \\ (and @\) to output a \ character. -% FYI, plain.tex uses \\ as a temporary control sequence (why?), but -% this is not advertised and we don't care. Texinfo does not -% otherwise define @\. -% -% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. -\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} -% -\def\math{% - \tex - \mathunderscore - \let\\ = \mathbackslash - \mathactive - $\finishmath -} -\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. - -% Some active characters (such as <) are spaced differently in math. -% We have to reset their definitions in case the @math was an argument -% to a command which sets the catcodes (such as @item or @section). -% -{ - \catcode`^ = \active - \catcode`< = \active - \catcode`> = \active - \catcode`+ = \active - \gdef\mathactive{% - \let^ = \ptexhat - \let< = \ptexless - \let> = \ptexgtr - \let+ = \ptexplus - } -} - -% @bullet and @minus need the same treatment as @math, just above. -\def\bullet{$\ptexbullet$} -\def\minus{$-$} - -% @dots{} outputs an ellipsis using the current font. -% We do .5em per period so that it has the same spacing in the cm -% typewriter fonts as three actual period characters; on the other hand, -% in other typewriter fonts three periods are wider than 1.5em. So do -% whichever is larger. -% -\def\dots{% - \leavevmode - \setbox0=\hbox{...}% get width of three periods - \ifdim\wd0 > 1.5em - \dimen0 = \wd0 - \else - \dimen0 = 1.5em - \fi - \hbox to \dimen0{% - \hskip 0pt plus.25fil - .\hskip 0pt plus1fil - .\hskip 0pt plus1fil - .\hskip 0pt plus.5fil - }% -} - -% @enddots{} is an end-of-sentence ellipsis. -% -\def\enddots{% - \dots - \spacefactor=\endofsentencespacefactor -} - -% @comma{} is so commas can be inserted into text without messing up -% Texinfo's parsing. -% -\let\comma = , - % @refill is a no-op. \let\refill=\relax @@ -1237,9 +1081,8 @@ where each line of input produces a line of output.} \newif\ifpdfmakepagedest % when pdftex is run in dvi mode, \pdfoutput is defined (so \pdfoutput=1 -% can be set). So we test for \relax and 0 as well as \undefined, -% borrowed from ifpdf.sty. -\ifx\pdfoutput\undefined +% can be set). So we test for \relax and 0 as well as being undefined. +\ifx\pdfoutput\thisisundefined \else \ifx\pdfoutput\relax \else @@ -1254,50 +1097,24 @@ where each line of input produces a line of output.} % for display in the outlines, and in other places. Thus, we have to % double any backslashes. Otherwise, a name like "\node" will be % interpreted as a newline (\n), followed by o, d, e. Not good. -% http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html -% (and related messages, the final outcome is that it is up to the TeX -% user to double the backslashes and otherwise make the string valid, so -% that's what we do). - -% double active backslashes. -% -{\catcode`\@=0 \catcode`\\=\active - @gdef@activebackslashdouble{% - @catcode`@\=@active - @let\=@doublebackslash} -} - -% To handle parens, we must adopt a different approach, since parens are -% not active characters. hyperref.dtx (which has the same problem as -% us) handles it with this amazing macro to replace tokens, with minor -% changes for Texinfo. It is included here under the GPL by permission -% from the author, Heiko Oberdiek. % -% #1 is the tokens to replace. -% #2 is the replacement. -% #3 is the control sequence with the string. -% -\def\HyPsdSubst#1#2#3{% - \def\HyPsdReplace##1#1##2\END{% - ##1% - \ifx\\##2\\% - \else - #2% - \HyReturnAfterFi{% - \HyPsdReplace##2\END - }% - \fi - }% - \xdef#3{\expandafter\HyPsdReplace#3#1\END}% -} -\long\def\HyReturnAfterFi#1\fi{\fi#1} - -% #1 is a control sequence in which to do the replacements. -\def\backslashparens#1{% - \xdef#1{#1}% redefine it as its expansion; the definition is simply - % \lastnode when called from \setref -> \pdfmkdest. - \HyPsdSubst{(}{\realbackslash(}{#1}% - \HyPsdSubst{)}{\realbackslash)}{#1}% +% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and +% related messages. The final outcome is that it is up to the TeX user +% to double the backslashes and otherwise make the string valid, so +% that's what we do. pdftex 1.30.0 (ca.2005) introduced a primitive to +% do this reliably, so we use it. + +% #1 is a control sequence in which to do the replacements, +% which we \xdef. +\def\txiescapepdf#1{% + \ifx\pdfescapestring\relax + % No primitive available; should we give a warning or log? + % Many times it won't matter. + \else + % The expandable \pdfescapestring primitive escapes parentheses, + % backslashes, and other special chars. + \xdef#1{\pdfescapestring{#1}}% + \fi } \newhelp\nopdfimagehelp{Texinfo supports .png, .jpg, .jpeg, and .pdf images @@ -1307,11 +1124,17 @@ output) for that.)} \ifpdf % - % Color manipulation macros based on pdfcolor.tex. - \def\cmykDarkRed{0.28 1 1 0.35} - \def\cmykBlack{0 0 0 1} + % Color manipulation macros based on pdfcolor.tex, + % except using rgb instead of cmyk; the latter is said to render as a + % very dark gray on-screen and a very dark halftone in print, instead + % of actual black. + \def\rgbDarkRed{0.50 0.09 0.12} + \def\rgbBlack{0 0 0} + % + % k sets the color for filling (usual text, etc.); + % K sets the color for stroking (thin rules, e.g., normal _'s). + \def\pdfsetcolor#1{\pdfliteral{#1 rg #1 RG}} % - \def\pdfsetcolor#1{\pdfliteral{#1 k}} % Set color, and create a mark which defines \thiscolor accordingly, % so that \makeheadline knows which color to restore. \def\setcolor#1{% @@ -1320,7 +1143,7 @@ output) for that.)} \pdfsetcolor{#1}% } % - \def\maincolor{\cmykBlack} + \def\maincolor{\rgbBlack} \pdfsetcolor{\maincolor} \edef\thiscolor{\maincolor} \def\lastcolordefs{} @@ -1353,31 +1176,36 @@ output) for that.)} \def\imagewidth{#2}\setbox0 = \hbox{\ignorespaces #2}% \def\imageheight{#3}\setbox2 = \hbox{\ignorespaces #3}% % - % pdftex (and the PDF format) support .png, .jpg, .pdf (among - % others). Let's try in that order. + % pdftex (and the PDF format) support .pdf, .png, .jpg (among + % others). Let's try in that order, PDF first since if + % someone has a scalable image, presumably better to use that than a + % bitmap. \let\pdfimgext=\empty \begingroup - \openin 1 #1.png \ifeof 1 - \openin 1 #1.jpg \ifeof 1 - \openin 1 #1.jpeg \ifeof 1 - \openin 1 #1.JPG \ifeof 1 - \openin 1 #1.pdf \ifeof 1 - \errhelp = \nopdfimagehelp - \errmessage{Could not find image file #1 for pdf}% - \else \gdef\pdfimgext{pdf}% + \openin 1 #1.pdf \ifeof 1 + \openin 1 #1.PDF \ifeof 1 + \openin 1 #1.png \ifeof 1 + \openin 1 #1.jpg \ifeof 1 + \openin 1 #1.jpeg \ifeof 1 + \openin 1 #1.JPG \ifeof 1 + \errhelp = \nopdfimagehelp + \errmessage{Could not find image file #1 for pdf}% + \else \gdef\pdfimgext{JPG}% + \fi + \else \gdef\pdfimgext{jpeg}% \fi - \else \gdef\pdfimgext{JPG}% + \else \gdef\pdfimgext{jpg}% \fi - \else \gdef\pdfimgext{jpeg}% + \else \gdef\pdfimgext{png}% \fi - \else \gdef\pdfimgext{jpg}% + \else \gdef\pdfimgext{PDF}% \fi - \else \gdef\pdfimgext{png}% + \else \gdef\pdfimgext{pdf}% \fi \closein 1 \endgroup % - % without \immediate, pdftex seg faults when the same image is + % without \immediate, ancient pdftex seg faults when the same image is % included twice. (Version 3.14159-pre-1.0-unofficial-20010704.) \ifnum\pdftexversion < 14 \immediate\pdfimage @@ -1400,10 +1228,9 @@ output) for that.)} % such as \, aren't expanded when present in a section title. \indexnofonts \turnoffactive - \activebackslashdouble \makevalueexpandable \def\pdfdestname{#1}% - \backslashparens\pdfdestname + \txiescapepdf\pdfdestname \safewhatsit{\pdfdest name{\pdfdestname} xyz}% }} % @@ -1412,8 +1239,8 @@ output) for that.)} % % by default, use a color that is dark enough to print on paper as % nearly black, but still distinguishable for online viewing. - \def\urlcolor{\cmykDarkRed} - \def\linkcolor{\cmykDarkRed} + \def\urlcolor{\rgbDarkRed} + \def\linkcolor{\rgbDarkRed} \def\endlink{\setcolor{\maincolor}\pdfendlink} % % Adding outlines to PDF; macros for calculating structure of outlines @@ -1435,29 +1262,24 @@ output) for that.)} % page number. We could generate a destination for the section % text in the case where a section has no node, but it doesn't % seem worth the trouble, since most documents are normally structured. - \def\pdfoutlinedest{#3}% + \edef\pdfoutlinedest{#3}% \ifx\pdfoutlinedest\empty \def\pdfoutlinedest{#4}% \else - % Doubled backslashes in the name. - {\activebackslashdouble \xdef\pdfoutlinedest{#3}% - \backslashparens\pdfoutlinedest}% + \txiescapepdf\pdfoutlinedest \fi % - % Also double the backslashes in the display string. - {\activebackslashdouble \xdef\pdfoutlinetext{#1}% - \backslashparens\pdfoutlinetext}% + % Also escape PDF chars in the display string. + \edef\pdfoutlinetext{#1}% + \txiescapepdf\pdfoutlinetext % \pdfoutline goto name{\pdfmkpgn{\pdfoutlinedest}}#2{\pdfoutlinetext}% } % \def\pdfmakeoutlines{% \begingroup - % Thanh's hack / proper braces in bookmarks - \edef\mylbrace{\iftrue \string{\else}\fi}\let\{=\mylbrace - \edef\myrbrace{\iffalse{\else\string}\fi}\let\}=\myrbrace - % % Read toc silently, to get counts of subentries for \pdfoutline. + \def\partentry##1##2##3##4{}% ignore parts in the outlines \def\numchapentry##1##2##3##4{% \def\thischapnum{##2}% \def\thissecnum{0}% @@ -1511,15 +1333,26 @@ output) for that.)} % Latin 2 (0xea) gets translated to a | character. Info from % Staszek Wawrykiewicz, 19 Jan 2004 04:09:24 +0100. % - % xx to do this right, we have to translate 8-bit characters to - % their "best" equivalent, based on the @documentencoding. Right - % now, I guess we'll just let the pdf reader have its way. + % TODO this right, we have to translate 8-bit characters to + % their "best" equivalent, based on the @documentencoding. Too + % much work for too little return. Just use the ASCII equivalents + % we use for the index sort strings. + % \indexnofonts \setupdatafile + % We can have normal brace characters in the PDF outlines, unlike + % Texinfo index files. So set that up. + \def\{{\lbracecharliteral}% + \def\}{\rbracecharliteral}% \catcode`\\=\active \otherbackslash \input \tocreadfilename \endgroup } + {\catcode`[=1 \catcode`]=2 + \catcode`{=\other \catcode`}=\other + \gdef\lbracecharliteral[{]% + \gdef\rbracecharliteral[}]% + ] % \def\skipspaces#1{\def\PP{#1}\def\D{|}% \ifx\PP\D\let\nextsp\relax @@ -1542,11 +1375,15 @@ output) for that.)} % tried to figure out what each command should do in the context % of @url. for now, just make @/ a no-op, that's the only one % people have actually reported a problem with. - % + % \normalturnoffactive \def\@{@}% \let\/=\empty \makevalueexpandable + % do we want to go so far as to use \indexnofonts instead of just + % special-casing \var here? + \def\var##1{##1}% + % \leavevmode\setcolor{\urlcolor}% \startlink attr{/Border [0 0 0]}% user{/Subtype /Link /A << /S /URI /URI (#1) >>}% @@ -1577,6 +1414,7 @@ output) for that.)} \setcolor{\linkcolor}#1\endlink} \def\done{\edef\st{\global\noexpand\toksA={\the\toksB}}\st} \else + % non-pdf mode \let\pdfmkdest = \gobble \let\pdfurl = \gobble \let\endlink = \relax @@ -1607,6 +1445,10 @@ output) for that.)} \def\bf{\fam=\bffam \setfontstyle{bf}}\def\bfstylename{bf} \def\tt{\fam=\ttfam \setfontstyle{tt}} +% Unfortunately, we have to override this for titles and the like, since +% in those cases "rm" is bold. Sigh. +\def\rmisbold{\rm\def\curfontstyle{bf}} + % Texinfo sort of supports the sans serif font style, which plain TeX does not. % So we set up a \sf. \newfam\sffam @@ -1642,11 +1484,17 @@ output) for that.)} }% } -% % PDF CMaps. See also LaTeX's t1.cmap. % -% \cmapOT1 -\ifpdf +% do nothing with this by default. +\expandafter\let\csname cmapOT1\endcsname\gobble +\expandafter\let\csname cmapOT1IT\endcsname\gobble +\expandafter\let\csname cmapOT1TT\endcsname\gobble + +% if we are producing pdf, and we have \pdffontattr, then define cmaps. +% (\pdffontattr was introduced many years ago, but people still run +% older pdftex's; it's easy to conditionalize, so we do.) +\ifpdf \ifx\pdffontattr\thisisundefined \else \begingroup \catcode`\^^M=\active \def^^M{^^J}% Output line endings as the ^^J char. \catcode`\%=12 \immediate\pdfobj stream {%!PS-Adobe-3.0 Resource-CMap @@ -1894,11 +1742,7 @@ end \expandafter\edef\csname cmapOT1TT\endcsname#1{% \pdffontattr#1{/ToUnicode \the\pdflastobj\space 0 R}% }% -\else - \expandafter\let\csname cmapOT1\endcsname\gobble - \expandafter\let\csname cmapOT1IT\endcsname\gobble - \expandafter\let\csname cmapOT1TT\endcsname\gobble -\fi +\fi\fi % Set the font macro #1 to the font named #2, adding on the @@ -1912,12 +1756,12 @@ end } % This is what gets called when #5 of \setfont is empty. \let\cmap\gobble - +% emacs-page end of cmaps % Use cm as the default font prefix. % To specify the font prefix, you must define \fontprefix % before you read in texinfo.tex. -\ifx\fontprefix\undefined +\ifx\fontprefix\thisisundefined \def\fontprefix{cm} \fi % Support font families that don't use the same naming scheme as CM. @@ -1939,7 +1783,7 @@ end % Definitions for a main text size of 11pt. This is the default in % Texinfo. -% +% \def\definetextfontsizexi{% % Text fonts (11.2pt, magstep1). \def\textnominalsize{11pt} @@ -2002,8 +1846,6 @@ end \setfont\titlesc\scbshape{10}{\magstep4}{OT1} \font\titlei=cmmi12 scaled \magstep3 \font\titlesy=cmsy10 scaled \magstep4 -\def\authorrm{\secrm} -\def\authortt{\sectt} \def\titleecsize{2074} % Chapter (and unnumbered) fonts (17.28pt). @@ -2062,8 +1904,8 @@ end \font\reducedsy=cmsy10 \def\reducedecsize{1000} -% reset the current fonts -\textfonts +\textleading = 13.2pt % line spacing for 11pt CM +\textfonts % reset the current fonts \rm } % end of 11pt text font size definitions @@ -2072,7 +1914,7 @@ end % section, chapter, etc., sizes following suit. This is for the GNU % Press printing of the Emacs 22 manual. Maybe other manuals in the % future. Used with @smallbook, which sets the leading to 12pt. -% +% \def\definetextfontsizex{% % Text fonts (10pt). \def\textnominalsize{10pt} @@ -2135,8 +1977,6 @@ end \setfont\titlesc\scbshape{10}{\magstep4}{OT1} \font\titlei=cmmi12 scaled \magstep3 \font\titlesy=cmsy10 scaled \magstep4 -\def\authorrm{\secrm} -\def\authortt{\sectt} \def\titleecsize{2074} % Chapter fonts (14.4pt). @@ -2163,7 +2003,7 @@ end \setfont\secsf\sfbshape{12}{1000}{OT1} \let\secbf\secrm \setfont\secsc\scbshape{10}{\magstep1}{OT1} -\font\seci=cmmi12 +\font\seci=cmmi12 \font\secsy=cmsy10 scaled \magstep1 \def\sececsize{1200} @@ -2195,11 +2035,9 @@ end \font\reducedsy=cmsy9 \def\reducedecsize{0900} -% reduce space between paragraphs -\divide\parskip by 2 - -% reset the current fonts -\textfonts +\divide\parskip by 2 % reduce space between paragraphs +\textleading = 12pt % line spacing for 10pt CM +\textfonts % reset the current fonts \rm } % end of 10pt text font size definitions @@ -2207,17 +2045,18 @@ end % We provide the user-level command % @fonttextsize 10 % (or 11) to redefine the text font size. pt is assumed. -% -\def\xword{10} +% \def\xiword{11} +\def\xword{10} +\def\xwordpt{10pt} % \parseargdef\fonttextsize{% \def\textsizearg{#1}% - \wlog{doing @fonttextsize \textsizearg}% + %\wlog{doing @fonttextsize \textsizearg}% % % Set \globaldefs so that documents can use this inside @tex, since % makeinfo 4.8 does not support it, but we need it nonetheless. - % + % \begingroup \globaldefs=1 \ifx\textsizearg\xword \definetextfontsizex \else \ifx\textsizearg\xiword \definetextfontsizexi @@ -2267,8 +2106,8 @@ end \let\tenttsl=\titlettsl \def\curfontsize{title}% \def\lsize{chap}\def\lllsize{subsec}% - \resetmathfonts \setleading{25pt}} -\def\titlefont#1{{\titlefonts\rm #1}} + \resetmathfonts \setleading{27pt}} +\def\titlefont#1{{\titlefonts\rmisbold #1}} \def\chapfonts{% \let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl \let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc @@ -2319,6 +2158,16 @@ end \def\lsize{smaller}\def\lllsize{smaller}% \resetmathfonts \setleading{9.5pt}} +% Fonts for short table of contents. +\setfont\shortcontrm\rmshape{12}{1000}{OT1} +\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 +\setfont\shortcontsl\slshape{12}{1000}{OT1} +\setfont\shortconttt\ttshape{12}{1000}{OT1TT} + +% Define these just so they can be easily changed for other fonts. +\def\angleleft{$\langle$} +\def\angleright{$\rangle$} + % Set the fonts to use with the @small... environments. \let\smallexamplefonts = \smallfonts @@ -2332,53 +2181,215 @@ end % % By the way, for comparison, here's what fits with @example (10pt): % 8.5x11=71 smallbook=60 a4=75 a5=58 -% -% I wish the USA used A4 paper. % --karl, 24jan03. - % Set up the default fonts, so we can use them for creating boxes. % \definetextfontsizexi -% Define these so they can be easily changed for other fonts. -\def\angleleft{$\langle$} -\def\angleright{$\rangle$} -% Count depth in font-changes, for error checks -\newcount\fontdepth \fontdepth=0 +\message{markup,} -% Fonts for short table of contents. -\setfont\shortcontrm\rmshape{12}{1000}{OT1} -\setfont\shortcontbf\bfshape{10}{\magstep1}{OT1} % no cmb12 -\setfont\shortcontsl\slshape{12}{1000}{OT1} -\setfont\shortconttt\ttshape{12}{1000}{OT1TT} +% Check if we are currently using a typewriter font. Since all the +% Computer Modern typewriter fonts have zero interword stretch (and +% shrink), and it is reasonable to expect all typewriter fonts to have +% this property, we can check that font parameter. +% +\def\ifmonospace{\ifdim\fontdimen3\font=0pt } + +% Markup style infrastructure. \defmarkupstylesetup\INITMACRO will +% define and register \INITMACRO to be called on markup style changes. +% \INITMACRO can check \currentmarkupstyle for the innermost +% style and the set of \ifmarkupSTYLE switches for all styles +% currently in effect. +\newif\ifmarkupvar +\newif\ifmarkupsamp +\newif\ifmarkupkey +%\newif\ifmarkupfile % @file == @samp. +%\newif\ifmarkupoption % @option == @samp. +\newif\ifmarkupcode +\newif\ifmarkupkbd +%\newif\ifmarkupenv % @env == @code. +%\newif\ifmarkupcommand % @command == @code. +\newif\ifmarkuptex % @tex (and part of @math, for now). +\newif\ifmarkupexample +\newif\ifmarkupverb +\newif\ifmarkupverbatim -%% Add scribe-like font environments, plus @l for inline lisp (usually sans -%% serif) and @ii for TeX italic +\let\currentmarkupstyle\empty -% \smartitalic{ARG} outputs arg in italics, followed by an italic correction -% unless the following character is such as not to need one. -\def\smartitalicx{\ifx\next,\else\ifx\next-\else\ifx\next.\else - \ptexslash\fi\fi\fi} -\def\smartslanted#1{{\ifusingtt\ttsl\sl #1}\futurelet\next\smartitalicx} -\def\smartitalic#1{{\ifusingtt\ttsl\it #1}\futurelet\next\smartitalicx} +\def\setupmarkupstyle#1{% + \csname markup#1true\endcsname + \def\currentmarkupstyle{#1}% + \markupstylesetup +} -% like \smartslanted except unconditionally uses \ttsl. +\let\markupstylesetup\empty + +\def\defmarkupstylesetup#1{% + \expandafter\def\expandafter\markupstylesetup + \expandafter{\markupstylesetup #1}% + \def#1% +} + +% Markup style setup for left and right quotes. +\defmarkupstylesetup\markupsetuplq{% + \expandafter\let\expandafter \temp + \csname markupsetuplq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuplqdefault \else \temp \fi +} + +\defmarkupstylesetup\markupsetuprq{% + \expandafter\let\expandafter \temp + \csname markupsetuprq\currentmarkupstyle\endcsname + \ifx\temp\relax \markupsetuprqdefault \else \temp \fi +} + +{ +\catcode`\'=\active +\catcode`\`=\active + +\gdef\markupsetuplqdefault{\let`\lq} +\gdef\markupsetuprqdefault{\let'\rq} + +\gdef\markupsetcodequoteleft{\let`\codequoteleft} +\gdef\markupsetcodequoteright{\let'\codequoteright} + +\gdef\markupsetnoligaturesquoteleft{\let`\noligaturesquoteleft} +} + +\let\markupsetuplqcode \markupsetcodequoteleft +\let\markupsetuprqcode \markupsetcodequoteright +% +\let\markupsetuplqexample \markupsetcodequoteleft +\let\markupsetuprqexample \markupsetcodequoteright +% +\let\markupsetuplqsamp \markupsetcodequoteleft +\let\markupsetuprqsamp \markupsetcodequoteright +% +\let\markupsetuplqverb \markupsetcodequoteleft +\let\markupsetuprqverb \markupsetcodequoteright +% +\let\markupsetuplqverbatim \markupsetcodequoteleft +\let\markupsetuprqverbatim \markupsetcodequoteright + +\let\markupsetuplqkbd \markupsetnoligaturesquoteleft + +% Allow an option to not use regular directed right quote/apostrophe +% (char 0x27), but instead the undirected quote from cmtt (char 0x0d). +% The undirected quote is ugly, so don't make it the default, but it +% works for pasting with more pdf viewers (at least evince), the +% lilypond developers report. xpdf does work with the regular 0x27. +% +\def\codequoteright{% + \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax + \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax + '% + \else \char'15 \fi + \else \char'15 \fi +} +% +% and a similar option for the left quote char vs. a grave accent. +% Modern fonts display ASCII 0x60 as a grave accent, so some people like +% the code environments to do likewise. +% +\def\codequoteleft{% + \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax + \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax + % [Knuth] pp. 380,381,391 + % \relax disables Spanish ligatures ?` and !` of \tt font. + \relax`% + \else \char'22 \fi + \else \char'22 \fi +} + +% Commands to set the quote options. +% +\parseargdef\codequoteundirected{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequoteundirected\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequoteundirected value `\temp', must be on|off}% + \fi\fi +} +% +\parseargdef\codequotebacktick{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = t% + \else\ifx\temp\offword + \expandafter\let\csname SETtxicodequotebacktick\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @codequotebacktick value `\temp', must be on|off}% + \fi\fi +} + +% [Knuth] pp. 380,381,391, disable Spanish ligatures ?` and !` of \tt font. +\def\noligaturesquoteleft{\relax\lq} + +% Count depth in font-changes, for error checks +\newcount\fontdepth \fontdepth=0 + +% Font commands. + +% #1 is the font command (\sl or \it), #2 is the text to slant. +% If we are in a monospaced environment, however, 1) always use \ttsl, +% and 2) do not add an italic correction. +\def\dosmartslant#1#2{% + \ifusingtt + {{\ttsl #2}\let\next=\relax}% + {\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}% + \next +} +\def\smartslanted{\dosmartslant\sl} +\def\smartitalic{\dosmartslant\it} + +% Output an italic correction unless \next (presumed to be the following +% character) is such as not to need one. +\def\smartitaliccorrection{% + \ifx\next,% + \else\ifx\next-% + \else\ifx\next.% + \else\ptexslash + \fi\fi\fi + \aftersmartic +} + +% like \smartslanted except unconditionally uses \ttsl, and no ic. % @var is set to this for defun arguments. -\def\ttslanted#1{{\ttsl #1}\futurelet\next\smartitalicx} +\def\ttslanted#1{{\ttsl #1}} -% like \smartslanted except unconditionally use \sl. We never want +% @cite is like \smartslanted except unconditionally use \sl. We never want % ttsl for book titles, do we? -\def\cite#1{{\sl #1}\futurelet\next\smartitalicx} +\def\cite#1{{\sl #1}\futurelet\next\smartitaliccorrection} + +\def\aftersmartic{} +\def\var#1{% + \let\saveaftersmartic = \aftersmartic + \def\aftersmartic{\null\let\aftersmartic=\saveaftersmartic}% + \smartslanted{#1}% +} \let\i=\smartitalic \let\slanted=\smartslanted -\let\var=\smartslanted \let\dfn=\smartslanted \let\emph=\smartitalic -% @b, explicit bold. +% Explicit font changes: @r, @sc, undocumented @ii. +\def\r#1{{\rm #1}} % roman font +\def\sc#1{{\smallcaps#1}} % smallcaps font +\def\ii#1{{\it #1}} % italic font + +% @b, explicit bold. Also @strong. \def\b#1{{\bf #1}} \let\strong=\b @@ -2410,22 +2421,35 @@ end \catcode`@=\other \def\endofsentencespacefactor{3000}% default +% @t, explicit typewriter. \def\t#1{% {\tt \rawbackslash \plainfrenchspacing #1}% \null } -\def\samp#1{`\tclose{#1}'\null} -\setfont\keyrm\rmshape{8}{1000}{OT1} -\font\keysy=cmsy9 -\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% - \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% - \vbox{\hrule\kern-0.4pt - \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% - \kern-0.4pt\hrule}% - \kern-.06em\raise0.4pt\hbox{\angleright}}}} -\def\key #1{{\nohyphenation \uppercase{#1}}\null} -% The old definition, with no lozenge: -%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null} + +% @samp. +\def\samp#1{{\setupmarkupstyle{samp}\lq\tclose{#1}\rq\null}} + +% definition of @key that produces a lozenge. Doesn't adjust to text size. +%\setfont\keyrm\rmshape{8}{1000}{OT1} +%\font\keysy=cmsy9 +%\def\key#1{{\keyrm\textfont2=\keysy \leavevmode\hbox{% +% \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{% +% \vbox{\hrule\kern-0.4pt +% \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}% +% \kern-0.4pt\hrule}% +% \kern-.06em\raise0.4pt\hbox{\angleright}}}} + +% definition of @key with no lozenge. If the current font is already +% monospace, don't change it; that way, we respect @kbdinputstyle. But +% if it isn't monospace, then use \tt. +% +\def\key#1{{\setupmarkupstyle{key}% + \nohyphenation + \ifmonospace\else\tt\fi + #1}\null} + +% ctrl is no longer a Texinfo command. \def\ctrl #1{{\tt \rawbackslash \hat}#1} % @file, @option are the same as @samp. @@ -2452,7 +2476,7 @@ end \plainfrenchspacing #1% }% - \null + \null % reset spacefactor to 1000 } % We *must* turn on hyphenation at `-' and `_' in @code. @@ -2467,11 +2491,11 @@ end { \catcode`\-=\active \catcode`\_=\active \catcode`\'=\active \catcode`\`=\active + \global\let'=\rq \global\let`=\lq % default definitions % \global\def\code{\begingroup - \catcode\rquoteChar=\active \catcode\lquoteChar=\active - \let'\codequoteright \let`\codequoteleft - % + \setupmarkupstyle{code}% + % The following should really be moved into \setupmarkupstyle handlers. \catcode\dashChar=\active \catcode\underChar=\active \ifallowcodebreaks \let-\codedash @@ -2484,6 +2508,8 @@ end } } +\def\codex #1{\tclose{#1}\endgroup} + \def\realdash{-} \def\codedash{-\discretionary{}{}{}} \def\codeunder{% @@ -2497,13 +2523,12 @@ end \discretionary{}{}{}}% {\_}% } -\def\codex #1{\tclose{#1}\endgroup} % An additional complication: the above will allow breaks after, e.g., % each of the four underscores in __typeof__. This is undesirable in % some manuals, especially if they don't have long identifiers in % general. @allowcodebreaks provides a way to control this. -% +% \newif\ifallowcodebreaks \allowcodebreakstrue \def\keywordtrue{true} @@ -2517,55 +2542,18 @@ end \allowcodebreaksfalse \else \errhelp = \EMsimple - \errmessage{Unknown @allowcodebreaks option `\txiarg'}% + \errmessage{Unknown @allowcodebreaks option `\txiarg', must be true|false}% \fi\fi } -% @kbd is like @code, except that if the argument is just one @key command, -% then @kbd has no effect. - -% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), -% `example' (@kbd uses ttsl only inside of @example and friends), -% or `code' (@kbd uses normal tty font always). -\parseargdef\kbdinputstyle{% - \def\txiarg{#1}% - \ifx\txiarg\worddistinct - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% - \else\ifx\txiarg\wordexample - \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% - \else\ifx\txiarg\wordcode - \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% - \else - \errhelp = \EMsimple - \errmessage{Unknown @kbdinputstyle option `\txiarg'}% - \fi\fi\fi -} -\def\worddistinct{distinct} -\def\wordexample{example} -\def\wordcode{code} - -% Default is `distinct.' -\kbdinputstyle distinct - -\def\xkey{\key} -\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% -\ifx\one\xkey\ifx\threex\three \key{#2}% -\else{\tclose{\kbdfont\look}}\fi -\else{\tclose{\kbdfont\look}}\fi} - -% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. -\let\indicateurl=\code -\let\env=\code -\let\command=\code - % @uref (abbreviation for `urlref') takes an optional (comma-separated) % second argument specifying the text to display and an optional third % arg as text to display instead of (rather than in addition to) the url -% itself. First (mandatory) arg is the url. Perhaps eventually put in -% a hypertex \special here. -% -\def\uref#1{\douref #1,,,\finish} -\def\douref#1,#2,#3,#4\finish{\begingroup +% itself. First (mandatory) arg is the url. +% (This \urefnobreak definition isn't used now, leaving it for a while +% for comparison.) +\def\urefnobreak#1{\dourefnobreak #1,,,\finish} +\def\dourefnobreak#1,#2,#3,#4\finish{\begingroup \unsepspaces \pdfurl{#1}% \setbox0 = \hbox{\ignorespaces #3}% @@ -2586,6 +2574,103 @@ end \endlink \endgroup} +% This \urefbreak definition is the active one. +\def\urefbreak{\begingroup \urefcatcodes \dourefbreak} +\let\uref=\urefbreak +\def\dourefbreak#1{\urefbreakfinish #1,,,\finish} +\def\urefbreakfinish#1,#2,#3,#4\finish{% doesn't work in @example + \unsepspaces + \pdfurl{#1}% + \setbox0 = \hbox{\ignorespaces #3}% + \ifdim\wd0 > 0pt + \unhbox0 % third arg given, show only that + \else + \setbox0 = \hbox{\ignorespaces #2}% + \ifdim\wd0 > 0pt + \ifpdf + \unhbox0 % PDF: 2nd arg given, show only it + \else + \unhbox0\ (\urefcode{#1})% DVI: 2nd arg given, show both it and url + \fi + \else + \urefcode{#1}% only url given, so show it + \fi + \fi + \endlink +\endgroup} + +% Allow line breaks around only a few characters (only). +\def\urefcatcodes{% + \catcode\ampChar=\active \catcode\dotChar=\active + \catcode\hashChar=\active \catcode\questChar=\active + \catcode\slashChar=\active +} +{ + \urefcatcodes + % + \global\def\urefcode{\begingroup + \setupmarkupstyle{code}% + \urefcatcodes + \let&\urefcodeamp + \let.\urefcodedot + \let#\urefcodehash + \let?\urefcodequest + \let/\urefcodeslash + \codex + } + % + % By default, they are just regular characters. + \global\def&{\normalamp} + \global\def.{\normaldot} + \global\def#{\normalhash} + \global\def?{\normalquest} + \global\def/{\normalslash} +} + +% we put a little stretch before and after the breakable chars, to help +% line breaking of long url's. The unequal skips make look better in +% cmtt at least, especially for dots. +\def\urefprestretch{\urefprebreak \hskip0pt plus.13em } +\def\urefpoststretch{\urefpostbreak \hskip0pt plus.1em } +% +\def\urefcodeamp{\urefprestretch \&\urefpoststretch} +\def\urefcodedot{\urefprestretch .\urefpoststretch} +\def\urefcodehash{\urefprestretch \#\urefpoststretch} +\def\urefcodequest{\urefprestretch ?\urefpoststretch} +\def\urefcodeslash{\futurelet\next\urefcodeslashfinish} +{ + \catcode`\/=\active + \global\def\urefcodeslashfinish{% + \urefprestretch \slashChar + % Allow line break only after the final / in a sequence of + % slashes, to avoid line break between the slashes in http://. + \ifx\next/\else \urefpoststretch \fi + } +} + +% One more complication: by default we'll break after the special +% characters, but some people like to break before the special chars, so +% allow that. Also allow no breaking at all, for manual control. +% +\parseargdef\urefbreakstyle{% + \def\txiarg{#1}% + \ifx\txiarg\wordnone + \def\urefprebreak{\nobreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordbefore + \def\urefprebreak{\allowbreak}\def\urefpostbreak{\nobreak} + \else\ifx\txiarg\wordafter + \def\urefprebreak{\nobreak}\def\urefpostbreak{\allowbreak} + \else + \errhelp = \EMsimple + \errmessage{Unknown @urefbreakstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\wordafter{after} +\def\wordbefore{before} +\def\wordnone{none} + +\urefbreakstyle after + % @url synonym for @uref, since that's how everyone uses it. % \let\url=\uref @@ -2607,55 +2692,334 @@ end \let\email=\uref \fi -% Check if we are currently using a typewriter font. Since all the -% Computer Modern typewriter fonts have zero interword stretch (and -% shrink), and it is reasonable to expect all typewriter fonts to have -% this property, we can check that font parameter. +% @kbd is like @code, except that if the argument is just one @key command, +% then @kbd has no effect. +\def\kbd#1{{\setupmarkupstyle{kbd}\def\look{#1}\expandafter\kbdfoo\look??\par}} + +% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always), +% `example' (@kbd uses ttsl only inside of @example and friends), +% or `code' (@kbd uses normal tty font always). +\parseargdef\kbdinputstyle{% + \def\txiarg{#1}% + \ifx\txiarg\worddistinct + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}% + \else\ifx\txiarg\wordexample + \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}% + \else\ifx\txiarg\wordcode + \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}% + \else + \errhelp = \EMsimple + \errmessage{Unknown @kbdinputstyle setting `\txiarg'}% + \fi\fi\fi +} +\def\worddistinct{distinct} +\def\wordexample{example} +\def\wordcode{code} + +% Default is `distinct'. +\kbdinputstyle distinct + +\def\xkey{\key} +\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}% +\ifx\one\xkey\ifx\threex\three \key{#2}% +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi +\else{\tclose{\kbdfont\setupmarkupstyle{kbd}\look}}\fi} + +% For @indicateurl, @env, @command quotes seem unnecessary, so use \code. +\let\indicateurl=\code +\let\env=\code +\let\command=\code + +% @clicksequence{File @click{} Open ...} +\def\clicksequence#1{\begingroup #1\endgroup} + +% @clickstyle @arrow (by default) +\parseargdef\clickstyle{\def\click{#1}} +\def\click{\arrow} + +% Typeset a dimension, e.g., `in' or `pt'. The only reason for the +% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. % -\def\ifmonospace{\ifdim\fontdimen3\font=0pt } +\def\dmn#1{\thinspace #1} + +% @l was never documented to mean ``switch to the Lisp font'', +% and it is not used as such in any manual I can find. We need it for +% Polish suppressed-l. --karl, 22sep96. +%\def\l#1{{\li #1}\null} + +% @acronym for "FBI", "NATO", and the like. +% We print this one point size smaller, since it's intended for +% all-uppercase. +% +\def\acronym#1{\doacronym #1,,\finish} +\def\doacronym#1,#2,#3\finish{% + {\selectfonts\lsize #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi + \null % reset \spacefactor=1000 +} + +% @abbr for "Comput. J." and the like. +% No font change, but don't do end-of-sentence spacing. +% +\def\abbr#1{\doabbr #1,,\finish} +\def\doabbr#1,#2,#3\finish{% + {\plainfrenchspacing #1}% + \def\temp{#2}% + \ifx\temp\empty \else + \space ({\unsepspaces \ignorespaces \temp \unskip})% + \fi + \null % reset \spacefactor=1000 +} + +% @asis just yields its argument. Used with @table, for example. +% +\def\asis#1{#1} + +% @math outputs its argument in math mode. +% +% One complication: _ usually means subscripts, but it could also mean +% an actual _ character, as in @math{@var{some_variable} + 1}. So make +% _ active, and distinguish by seeing if the current family is \slfam, +% which is what @var uses. +{ + \catcode`\_ = \active + \gdef\mathunderscore{% + \catcode`\_=\active + \def_{\ifnum\fam=\slfam \_\else\sb\fi}% + } +} +% Another complication: we want \\ (and @\) to output a math (or tt) \. +% FYI, plain.tex uses \\ as a temporary control sequence (for no +% particular reason), but this is not advertised and we don't care. +% +% The \mathchar is class=0=ordinary, family=7=ttfam, position=5C=\. +\def\mathbackslash{\ifnum\fam=\ttfam \mathchar"075C \else\backslash \fi} +% +\def\math{% + \tex + \mathunderscore + \let\\ = \mathbackslash + \mathactive + % make the texinfo accent commands work in math mode + \let\"=\ddot + \let\'=\acute + \let\==\bar + \let\^=\hat + \let\`=\grave + \let\u=\breve + \let\v=\check + \let\~=\tilde + \let\dotaccent=\dot + $\finishmath +} +\def\finishmath#1{#1$\endgroup} % Close the group opened by \tex. + +% Some active characters (such as <) are spaced differently in math. +% We have to reset their definitions in case the @math was an argument +% to a command which sets the catcodes (such as @item or @section). +% +{ + \catcode`^ = \active + \catcode`< = \active + \catcode`> = \active + \catcode`+ = \active + \catcode`' = \active + \gdef\mathactive{% + \let^ = \ptexhat + \let< = \ptexless + \let> = \ptexgtr + \let+ = \ptexplus + \let' = \ptexquoteright + } +} + +% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}. +% Ignore unless FMTNAME == tex; then it is like @iftex and @tex, +% except specified as a normal braced arg, so no newlines to worry about. +% +\def\outfmtnametex{tex} +% +\long\def\inlinefmt#1{\doinlinefmt #1,\finish} +\long\def\doinlinefmt#1,#2,\finish{% + \def\inlinefmtname{#1}% + \ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi +} +% For raw, must switch into @tex before parsing the argument, to avoid +% setting catcodes prematurely. Doing it this way means that, for +% example, @inlineraw{html, foo{bar} gets a parse error instead of being +% ignored. But this isn't important because if people want a literal +% *right* brace they would have to use a command anyway, so they may as +% well use a command to get a left brace too. We could re-use the +% delimiter character idea from \verb, but it seems like overkill. +% +\long\def\inlineraw{\tex \doinlineraw} +\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish} +\def\doinlinerawtwo#1,#2,\finish{% + \def\inlinerawname{#1}% + \ifx\inlinerawname\outfmtnametex \ignorespaces #2\fi + \endgroup % close group opened by \tex. +} + + +\message{glyphs,} +% and logos. + +% @@ prints an @, as does @atchar{}. +\def\@{\char64 } +\let\atchar=\@ + +% @{ @} @lbracechar{} @rbracechar{} all generate brace characters. +% Unless we're in typewriter, use \ecfont because the CM text fonts do +% not have braces, and we don't want to switch into math. +\def\mylbrace{{\ifmonospace\else\ecfont\fi \char123}} +\def\myrbrace{{\ifmonospace\else\ecfont\fi \char125}} +\let\{=\mylbrace \let\lbracechar=\{ +\let\}=\myrbrace \let\rbracechar=\} +\begingroup + % Definitions to produce \{ and \} commands for indices, + % and @{ and @} for the aux/toc files. + \catcode`\{ = \other \catcode`\} = \other + \catcode`\[ = 1 \catcode`\] = 2 + \catcode`\! = 0 \catcode`\\ = \other + !gdef!lbracecmd[\{]% + !gdef!rbracecmd[\}]% + !gdef!lbraceatcmd[@{]% + !gdef!rbraceatcmd[@}]% +!endgroup + +% @comma{} to avoid , parsing problems. +\let\comma = , + +% Accents: @, @dotaccent @ringaccent @ubaraccent @udotaccent +% Others are defined by plain TeX: @` @' @" @^ @~ @= @u @v @H. +\let\, = \ptexc +\let\dotaccent = \ptexdot +\def\ringaccent#1{{\accent23 #1}} +\let\tieaccent = \ptext +\let\ubaraccent = \ptexb +\let\udotaccent = \d + +% Other special characters: @questiondown @exclamdown @ordf @ordm +% Plain TeX defines: @AA @AE @O @OE @L (plus lowercase versions) @ss. +\def\questiondown{?`} +\def\exclamdown{!`} +\def\ordf{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{a}}} +\def\ordm{\leavevmode\raise1ex\hbox{\selectfonts\lllsize \underbar{o}}} + +% Dotless i and dotless j, used for accents. +\def\imacro{i} +\def\jmacro{j} +\def\dotless#1{% + \def\temp{#1}% + \ifx\temp\imacro \ifmmode\imath \else\ptexi \fi + \else\ifx\temp\jmacro \ifmmode\jmath \else\j \fi + \else \errmessage{@dotless can be used only with i or j}% + \fi\fi +} -% Typeset a dimension, e.g., `in' or `pt'. The only reason for the -% argument is to make the input look right: @dmn{pt} instead of @dmn{}pt. +% The \TeX{} logo, as in plain, but resetting the spacing so that a +% period following counts as ending a sentence. (Idea found in latex.) % -\def\dmn#1{\thinspace #1} - -\def\kbd#1{\def\look{#1}\expandafter\kbdfoo\look??\par} +\edef\TeX{\TeX \spacefactor=1000 } -% @l was never documented to mean ``switch to the Lisp font'', -% and it is not used as such in any manual I can find. We need it for -% Polish suppressed-l. --karl, 22sep96. -%\def\l#1{{\li #1}\null} +% @LaTeX{} logo. Not quite the same results as the definition in +% latex.ltx, since we use a different font for the raised A; it's most +% convenient for us to use an explicitly smaller font, rather than using +% the \scriptstyle font (since we don't reset \scriptstyle and +% \scriptscriptstyle). +% +\def\LaTeX{% + L\kern-.36em + {\setbox0=\hbox{T}% + \vbox to \ht0{\hbox{% + \ifx\textnominalsize\xwordpt + % for 10pt running text, \lllsize (8pt) is too small for the A in LaTeX. + % Revert to plain's \scriptsize, which is 7pt. + \count255=\the\fam $\fam\count255 \scriptstyle A$% + \else + % For 11pt, we can use our lllsize. + \selectfonts\lllsize A% + \fi + }% + \vss + }}% + \kern-.15em + \TeX +} -% Explicit font changes: @r, @sc, undocumented @ii. -\def\r#1{{\rm #1}} % roman font -\def\sc#1{{\smallcaps#1}} % smallcaps font -\def\ii#1{{\it #1}} % italic font +% Some math mode symbols. +\def\bullet{$\ptexbullet$} +\def\geq{\ifmmode \ge\else $\ge$\fi} +\def\leq{\ifmmode \le\else $\le$\fi} +\def\minus{\ifmmode -\else $-$\fi} -% @acronym for "FBI", "NATO", and the like. -% We print this one point size smaller, since it's intended for -% all-uppercase. -% -\def\acronym#1{\doacronym #1,,\finish} -\def\doacronym#1,#2,#3\finish{% - {\selectfonts\lsize #1}% - \def\temp{#2}% - \ifx\temp\empty \else - \space ({\unsepspaces \ignorespaces \temp \unskip})% +% @dots{} outputs an ellipsis using the current font. +% We do .5em per period so that it has the same spacing in the cm +% typewriter fonts as three actual period characters; on the other hand, +% in other typewriter fonts three periods are wider than 1.5em. So do +% whichever is larger. +% +\def\dots{% + \leavevmode + \setbox0=\hbox{...}% get width of three periods + \ifdim\wd0 > 1.5em + \dimen0 = \wd0 + \else + \dimen0 = 1.5em \fi + \hbox to \dimen0{% + \hskip 0pt plus.25fil + .\hskip 0pt plus1fil + .\hskip 0pt plus1fil + .\hskip 0pt plus.5fil + }% } -% @abbr for "Comput. J." and the like. -% No font change, but don't do end-of-sentence spacing. -% -\def\abbr#1{\doabbr #1,,\finish} -\def\doabbr#1,#2,#3\finish{% - {\plainfrenchspacing #1}% - \def\temp{#2}% - \ifx\temp\empty \else - \space ({\unsepspaces \ignorespaces \temp \unskip})% - \fi +% @enddots{} is an end-of-sentence ellipsis. +% +\def\enddots{% + \dots + \spacefactor=\endofsentencespacefactor } +% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. +% +% Since these characters are used in examples, they should be an even number of +% \tt widths. Each \tt character is 1en, so two makes it 1em. +% +\def\point{$\star$} +\def\arrow{\leavevmode\raise.05ex\hbox to 1em{\hfil$\rightarrow$\hfil}} +\def\result{\leavevmode\raise.05ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} +\def\expansion{\leavevmode\hbox to 1em{\hfil$\mapsto$\hfil}} +\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} +\def\equiv{\leavevmode\hbox to 1em{\hfil$\ptexequiv$\hfil}} + +% The @error{} command. +% Adapted from the TeXbook's \boxit. +% +\newbox\errorbox +% +{\tentt \global\dimen0 = 3em}% Width of the box. +\dimen2 = .55pt % Thickness of rules +% The text. (`r' is open on the right, `e' somewhat less so on the left.) +\setbox0 = \hbox{\kern-.75pt \reducedsf \putworderror\kern-1.5pt} +% +\setbox\errorbox=\hbox to \dimen0{\hfil + \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. + \advance\hsize by -2\dimen2 % Rules. + \vbox{% + \hrule height\dimen2 + \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. + \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. + \kern3pt\vrule width\dimen2}% Space to right. + \hrule height\dimen2} + \hfil} +% +\def\error{\leavevmode\lower.7ex\copy\errorbox} + % @pounds{} is a sterling sign, which Knuth put in the CM italic font. % \def\pounds{{\it\$}} @@ -2665,52 +3029,59 @@ end % Theiling, which support regular, slanted, bold and bold slanted (and % "outlined" (blackboard board, sort of) versions, which we don't need). % It is available from http://www.ctan.org/tex-archive/fonts/eurosym. -% +% % Although only regular is the truly official Euro symbol, we ignore % that. The Euro is designed to be slightly taller than the regular % font height. -% +% % feymr - regular % feymo - slanted % feybr - bold % feybo - bold slanted -% +% % There is no good (free) typewriter version, to my knowledge. % A feymr10 euro is ~7.3pt wide, while a normal cmtt10 char is ~5.25pt wide. % Hmm. -% +% % Also doesn't work in math. Do we need to do math with euro symbols? % Hope not. -% -% +% +% \def\euro{{\eurofont e}} \def\eurofont{% % We set the font at each command, rather than predefining it in % \textfonts and the other font-switching commands, so that % installations which never need the symbol don't have to have the % font installed. - % + % % There is only one designed size (nominal 10pt), so we always scale % that to the current nominal size. - % + % % By the way, simply using "at 1em" works for cmr10 and the like, but % does not work for cmbx10 and other extended/shrunken fonts. - % + % \def\eurosize{\csname\curfontsize nominalsize\endcsname}% % - \ifx\curfontstyle\bfstylename + \ifx\curfontstyle\bfstylename % bold: \font\thiseurofont = \ifusingit{feybo10}{feybr10} at \eurosize - \else + \else % regular: \font\thiseurofont = \ifusingit{feymo10}{feymr10} at \eurosize \fi \thiseurofont } -% Hacks for glyphs from the EC fonts similar to \euro. We don't -% use \let for the aliases, because sometimes we redefine the original -% macro, and the alias should reflect the redefinition. +% Glyphs from the EC fonts. We don't use \let for the aliases, because +% sometimes we redefine the original macro, and the alias should reflect +% the redefinition. +% +% Use LaTeX names for the Icelandic letters. +\def\DH{{\ecfont \char"D0}} % Eth +\def\dh{{\ecfont \char"F0}} % eth +\def\TH{{\ecfont \char"DE}} % Thorn +\def\th{{\ecfont \char"FE}} % thorn +% \def\guillemetleft{{\ecfont \char"13}} \def\guillemotleft{\guillemetleft} \def\guillemetright{{\ecfont \char"14}} @@ -2720,8 +3091,36 @@ end \def\quotedblbase{{\ecfont \char"12}} \def\quotesinglbase{{\ecfont \char"0D}} % +% This positioning is not perfect (see the ogonek LaTeX package), but +% we have the precomposed glyphs for the most common cases. We put the +% tests to use those glyphs in the single \ogonek macro so we have fewer +% dummy definitions to worry about for index entries, etc. +% +% ogonek is also used with other letters in Lithuanian (IOU), but using +% the precomposed glyphs for those is not so easy since they aren't in +% the same EC font. +\def\ogonek#1{{% + \def\temp{#1}% + \ifx\temp\macrocharA\Aogonek + \else\ifx\temp\macrochara\aogonek + \else\ifx\temp\macrocharE\Eogonek + \else\ifx\temp\macrochare\eogonek + \else + \ecfont \setbox0=\hbox{#1}% + \ifdim\ht0=1ex\accent"0C #1% + \else\ooalign{\unhbox0\crcr\hidewidth\char"0C \hidewidth}% + \fi + \fi\fi\fi\fi + }% +} +\def\Aogonek{{\ecfont \char"81}}\def\macrocharA{A} +\def\aogonek{{\ecfont \char"A1}}\def\macrochara{a} +\def\Eogonek{{\ecfont \char"86}}\def\macrocharE{E} +\def\eogonek{{\ecfont \char"A6}}\def\macrochare{e} +% +% Use the ec* fonts (cm-super in outline format) for non-CM glyphs. \def\ecfont{% - % We can't distinguish serif/sanserif and italic/slanted, but this + % We can't distinguish serif/sans and italic/slanted, but this % is used for crude hacks anyway (like adding French and German % quotes to documents typeset with CM, where we lose kerning), so % hopefully nobody will notice/care. @@ -2754,8 +3153,8 @@ end % Laurent Siebenmann reports \Orb undefined with: % Textures 1.7.7 (preloaded format=plain 93.10.14) (68K) 16 APR 2004 02:38 % so we'll define it if necessary. -% -\ifx\Orb\undefined +% +\ifx\Orb\thisisundefined \def\Orb{\mathhexbox20D} \fi @@ -2765,6 +3164,7 @@ end \chardef\quoteleft=`\` \chardef\quoteright=`\' + \message{page headings,} \newskip\titlepagetopglue \titlepagetopglue = 1.5in @@ -2782,8 +3182,9 @@ end \newif\ifsetshortcontentsaftertitlepage \let\setshortcontentsaftertitlepage = \setshortcontentsaftertitlepagetrue -\parseargdef\shorttitlepage{\begingroup\hbox{}\vskip 1.5in \chaprm \centerline{#1}% - \endgroup\page\hbox{}\page} +\parseargdef\shorttitlepage{% + \begingroup \hbox{}\vskip 1.5in \chaprm \centerline{#1}% + \endgroup\page\hbox{}\page} \envdef\titlepage{% % Open one extra group, as we want to close it in the middle of \Etitlepage. @@ -2843,17 +3244,14 @@ end \finishedtitlepagetrue } -%%% Macros to be used within @titlepage: +% Macros to be used within @titlepage: \let\subtitlerm=\tenrm \def\subtitlefont{\subtitlerm \normalbaselineskip = 13pt \normalbaselines} -\def\authorfont{\authorrm \normalbaselineskip = 16pt \normalbaselines - \let\tt=\authortt} - \parseargdef\title{% \checkenv\titlepage - \leftline{\titlefonts\rm #1} + \leftline{\titlefonts\rmisbold #1} % print a rule at the page bottom also. \finishedtitlepagefalse \vskip4pt \hrule height 4pt width \hsize \vskip4pt @@ -2874,12 +3272,12 @@ end \else \checkenv\titlepage \ifseenauthor\else \vskip 0pt plus 1filll \seenauthortrue \fi - {\authorfont \leftline{#1}}% + {\secfonts\rmisbold \leftline{#1}}% \fi } -%%% Set up page headings and footings. +% Set up page headings and footings. \let\thispage=\folio @@ -2973,10 +3371,14 @@ end \def\headings #1 {\csname HEADINGS#1\endcsname} -\def\HEADINGSoff{% -\global\evenheadline={\hfil} \global\evenfootline={\hfil} -\global\oddheadline={\hfil} \global\oddfootline={\hfil}} -\HEADINGSoff +\def\headingsoff{% non-global headings elimination + \evenheadline={\hfil}\evenfootline={\hfil}% + \oddheadline={\hfil}\oddfootline={\hfil}% +} + +\def\HEADINGSoff{{\globaldefs=1 \headingsoff}} % global setting +\HEADINGSoff % it's the default + % When we turn headings on, set the page number to 1. % For double-sided printing, put current file name in lower left corner, % chapter name on inside top of right hand pages, document @@ -3027,7 +3429,7 @@ end % This produces Day Month Year style of output. % Only define if not already defined, in case a txi-??.tex file has set % up a different format (e.g., txi-cs.tex does this). -\ifx\today\undefined +\ifx\today\thisisundefined \def\today{% \number\day\space \ifcase\month @@ -3088,7 +3490,7 @@ end \begingroup \advance\leftskip by-\tableindent \advance\hsize by\tableindent - \advance\rightskip by0pt plus1fil + \advance\rightskip by0pt plus1fil\relax \leavevmode\unhbox0\par \endgroup % @@ -3102,7 +3504,7 @@ end % cause the example and the item to crash together. So we use this % bizarre value of 10001 as a signal to \aboveenvbreak to insert % \parskip glue after all. Section titles are handled this way also. - % + % \penalty 10001 \endgroup \itemxneedsnegativevskipfalse @@ -3196,9 +3598,18 @@ end \parindent=0pt \parskip=\smallskipamount \ifdim\parskip=0pt \parskip=2pt \fi + % + % Try typesetting the item mark that if the document erroneously says + % something like @itemize @samp (intending @table), there's an error + % right away at the @itemize. It's not the best error message in the + % world, but it's better than leaving it to the @item. This means if + % the user wants an empty mark, they have to say @w{} not just @w. \def\itemcontents{#1}% + \setbox0 = \hbox{\itemcontents}% + % % @itemize with no arg is equivalent to @itemize @bullet. \ifx\itemcontents\empty\def\itemcontents{\bullet}\fi + % \let\item=\itemizeitem } @@ -3219,6 +3630,7 @@ end \ifnum\lastpenalty<10000 \parskip=0in \fi \noindent \hbox to 0pt{\hss \itemcontents \kern\itemmargin}% + % \vadjust{\penalty 1200}}% not good to break after first line of item. \flushcr } @@ -3440,12 +3852,19 @@ end % % @headitem starts a heading row, which we typeset in bold. % Assignments have to be global since we are inside the implicit group -% of an alignment entry. Note that \everycr resets \everytab. -\def\headitem{\checkenv\multitable \crcr \global\everytab={\bf}\the\everytab}% +% of an alignment entry. \everycr resets \everytab so we don't have to +% undo it ourselves. +\def\headitemfont{\b}% for people to use in the template row; not changeable +\def\headitem{% + \checkenv\multitable + \crcr + \global\everytab={\bf}% can't use \headitemfont since the parsing differs + \the\everytab % for the first item +}% % % A \tab used to include \hskip1sp. But then the space in a template % line is not enough. That is bad. So let's go back to just `&' until -% we encounter the problem it was intended to solve again. +% we again encounter the problem the 1sp was intended to solve. % --karl, nathan@acm.org, 20apr99. \def\tab{\checkenv\multitable &\the\everytab}% @@ -3557,18 +3976,18 @@ end \setbox0=\vbox{X}\global\multitablelinespace=\the\baselineskip \global\advance\multitablelinespace by-\ht0 \fi -%% Test to see if parskip is larger than space between lines of -%% table. If not, do nothing. -%% If so, set to same dimension as multitablelinespace. +% Test to see if parskip is larger than space between lines of +% table. If not, do nothing. +% If so, set to same dimension as multitablelinespace. \ifdim\multitableparskip>\multitablelinespace \global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. \fi% \ifdim\multitableparskip=0pt \global\multitableparskip=\multitablelinespace -\global\advance\multitableparskip-7pt %% to keep parskip somewhat smaller - %% than skip between lines in the table. +\global\advance\multitableparskip-7pt % to keep parskip somewhat smaller + % than skip between lines in the table. \fi} @@ -3844,11 +4263,11 @@ end \def\dosynindex#1#2#3{% % Only do \closeout if we haven't already done it, else we'll end up % closing the target index. - \expandafter \ifx\csname donesynindex#2\endcsname \undefined + \expandafter \ifx\csname donesynindex#2\endcsname \relax % The \closeout helps reduce unnecessary open files; the limit on the % Acorn RISC OS is a mere 16 files. \expandafter\closeout\csname#2indfile\endcsname - \expandafter\let\csname\donesynindex#2\endcsname = 1 + \expandafter\let\csname donesynindex#2\endcsname = 1 \fi % redefine \fooindfile: \expandafter\let\expandafter\temp\expandafter=\csname#3indfile\endcsname @@ -3883,11 +4302,14 @@ end \def\@{@}% change to @@ when we switch to @ as escape char in index files. \def\ {\realbackslash\space }% % - % Need these in case \tex is in effect and \{ is a \delimiter again. - % But can't use \lbracecmd and \rbracecmd because texindex assumes - % braces and backslashes are used only as delimiters. - \let\{ = \mylbrace - \let\} = \myrbrace + % Need these unexpandable (because we define \tt as a dummy) + % definitions when @{ or @} appear in index entry text. Also, more + % complicated, when \tex is in effect and \{ is a \delimiter again. + % We can't use \lbracecmd and \rbracecmd because texindex assumes + % braces and backslashes are used only as delimiters. Perhaps we + % should define @lbrace and @rbrace commands a la @comma. + \def\{{{\tt\char123}}% + \def\}{{\tt\char125}}% % % I don't entirely understand this, but when an index entry is % generated from a macro call, the \endinput which \scanmacro inserts @@ -3898,7 +4320,7 @@ end % processing continues to some further point. On the other hand, it % seems \endinput does not hurt in the printed index arg, since that % is still getting written without apparent harm. - % + % % Sample source (mac-idx3.tex, reported by Graham Percival to % help-texinfo, 22may06): % @macro funindex {WORD} @@ -3906,12 +4328,12 @@ end % @end macro % ... % @funindex commtest - % + % % The above is not enough to reproduce the bug, but it gives the flavor. - % + % % Sample whatsit resulting: % .@write3{\entry{xyz}{@folio }{@code {xyz@endinput }}} - % + % % So: \let\endinput = \empty % @@ -3940,7 +4362,7 @@ end \def\commondummies{% % % \definedummyword defines \#1 as \string\#1\space, thus effectively - % preventing its expansion. This is used only for control% words, + % preventing its expansion. This is used only for control words, % not control letters, because the \space would be incorrect for % control characters, but is needed to separate the control word % from whatever follows. @@ -3959,23 +4381,28 @@ end \commondummiesnofonts % \definedummyletter\_% + \definedummyletter\-% % % Non-English letters. \definedummyword\AA \definedummyword\AE + \definedummyword\DH \definedummyword\L - \definedummyword\OE \definedummyword\O + \definedummyword\OE + \definedummyword\TH \definedummyword\aa \definedummyword\ae + \definedummyword\dh + \definedummyword\exclamdown \definedummyword\l - \definedummyword\oe \definedummyword\o - \definedummyword\ss - \definedummyword\exclamdown - \definedummyword\questiondown + \definedummyword\oe \definedummyword\ordf \definedummyword\ordm + \definedummyword\questiondown + \definedummyword\ss + \definedummyword\th % % Although these internal commands shouldn't show up, sometimes they do. \definedummyword\bf @@ -3991,21 +4418,26 @@ end \definedummyword\TeX % % Assorted special characters. + \definedummyword\arrow \definedummyword\bullet \definedummyword\comma \definedummyword\copyright \definedummyword\registeredsymbol \definedummyword\dots \definedummyword\enddots + \definedummyword\entrybreak \definedummyword\equiv \definedummyword\error \definedummyword\euro + \definedummyword\expansion + \definedummyword\geq \definedummyword\guillemetleft \definedummyword\guillemetright \definedummyword\guilsinglleft \definedummyword\guilsinglright - \definedummyword\expansion + \definedummyword\leq \definedummyword\minus + \definedummyword\ogonek \definedummyword\pounds \definedummyword\point \definedummyword\print @@ -4049,6 +4481,7 @@ end \definedummyword\v \definedummyword\H \definedummyword\dotaccent + \definedummyword\ogonek \definedummyword\ringaccent \definedummyword\tieaccent \definedummyword\ubaraccent @@ -4059,18 +4492,24 @@ end \definedummyword\b \definedummyword\i \definedummyword\r + \definedummyword\sansserif \definedummyword\sc + \definedummyword\slanted \definedummyword\t % % Commands that take arguments. \definedummyword\acronym + \definedummyword\anchor \definedummyword\cite \definedummyword\code \definedummyword\command \definedummyword\dfn + \definedummyword\dmn + \definedummyword\email \definedummyword\emph \definedummyword\env \definedummyword\file + \definedummyword\indicateurl \definedummyword\kbd \definedummyword\key \definedummyword\math @@ -4098,7 +4537,7 @@ end \def\definedummyaccent##1{\let##1\asis}% % We can just ignore other control letters. \def\definedummyletter##1{\let##1\empty}% - % Hopefully, all control words can become @asis. + % All control words become @asis by default; overrides below. \let\definedummyword\definedummyaccent % \commondummiesnofonts @@ -4110,48 +4549,60 @@ end % \def\ { }% \def\@{@}% - % how to handle braces? \def\_{\normalunderscore}% + \def\-{}% @- shouldn't affect sorting + % + % Unfortunately, texindex is not prepared to handle braces in the + % content at all. So for index sorting, we map @{ and @} to strings + % starting with |, since that ASCII character is between ASCII { and }. + \def\{{|a}% + \def\}{|b}% % % Non-English letters. \def\AA{AA}% \def\AE{AE}% + \def\DH{DZZ}% \def\L{L}% \def\OE{OE}% \def\O{O}% + \def\TH{ZZZ}% \def\aa{aa}% \def\ae{ae}% + \def\dh{dzz}% + \def\exclamdown{!}% \def\l{l}% \def\oe{oe}% - \def\o{o}% - \def\ss{ss}% - \def\exclamdown{!}% - \def\questiondown{?}% \def\ordf{a}% \def\ordm{o}% + \def\o{o}% + \def\questiondown{?}% + \def\ss{ss}% + \def\th{zzz}% % \def\LaTeX{LaTeX}% \def\TeX{TeX}% % % Assorted special characters. % (The following {} will end up in the sort string, but that's ok.) + \def\arrow{->}% \def\bullet{bullet}% \def\comma{,}% \def\copyright{copyright}% - \def\registeredsymbol{R}% \def\dots{...}% \def\enddots{...}% \def\equiv{==}% \def\error{error}% \def\euro{euro}% + \def\expansion{==>}% + \def\geq{>=}% \def\guillemetleft{<<}% \def\guillemetright{>>}% \def\guilsinglleft{<}% \def\guilsinglright{>}% - \def\expansion{==>}% + \def\leq{<=}% \def\minus{-}% - \def\pounds{pounds}% \def\point{.}% + \def\pounds{pounds}% \def\print{-|}% \def\quotedblbase{"}% \def\quotedblleft{"}% @@ -4159,22 +4610,31 @@ end \def\quoteleft{`}% \def\quoteright{'}% \def\quotesinglbase{,}% + \def\registeredsymbol{R}% \def\result{=>}% - \def\textdegree{degrees}% + \def\textdegree{o}% + % + \expandafter\ifx\csname SETtxiindexlquoteignore\endcsname\relax + \else \indexlquoteignore \fi % % We need to get rid of all macros, leaving only the arguments (if present). % Of course this is not nearly correct, but it is the best we can do for now. % makeinfo does not expand macros in the argument to @deffn, which ends up % writing an index entry, and texindex isn't prepared for an index sort entry % that starts with \. - % + % % Since macro invocations are followed by braces, we can just redefine them % to take a single TeX argument. The case of a macro invocation that % goes to end-of-line is not handled. - % + % \macrolist } +% Undocumented (for FSFS 2nd ed.): @set txiindexlquoteignore makes us +% ignore left quotes in the sort term. +{\catcode`\`=\active + \gdef\indexlquoteignore{\let`=\empty}} + \let\indexbackslash=0 %overridden during \printindex. \let\SETmarginindex=\relax % put index entries in margin (undocumented)? @@ -4299,7 +4759,7 @@ end % to re-insert the same penalty (values >10000 are used for various % signals); since we just inserted a non-discardable item, any % following glue (such as a \parskip) would be a breakpoint. For example: - % + % % @deffn deffn-whatever % @vindex index-whatever % Description. @@ -4429,10 +4889,9 @@ end % % A straightforward implementation would start like this: % \def\entry#1#2{... -% But this frozes the catcodes in the argument, and can cause problems to +% But this freezes the catcodes in the argument, and can cause problems to % @code, which sets - active. This problem was fixed by a kludge--- % ``-'' was active throughout whole index, but this isn't really right. -% % The right solution is to prevent \entry from swallowing the whole text. % --kasal, 21nov03 \def\entry{% @@ -4469,10 +4928,17 @@ end % columns. \vskip 0pt plus1pt % + % When reading the text of entry, convert explicit line breaks + % from @* into spaces. The user might give these in long section + % titles, for instance. + \def\*{\unskip\space\ignorespaces}% + \def\entrybreak{\hfil\break}% + % % Swallow the left brace of the text (first parameter): \afterassignment\doentry \let\temp = } +\def\entrybreak{\unskip\space\ignorespaces}% \def\doentry{% \bgroup % Instead of the swallowed brace. \noindent @@ -4705,7 +5171,22 @@ end \message{sectioning,} % Chapters, sections, etc. -% \unnumberedno is an oxymoron, of course. But we count the unnumbered +% Let's start with @part. +\outer\parseargdef\part{\partzzz{#1}} +\def\partzzz#1{% + \chapoddpage + \null + \vskip.3\vsize % move it down on the page a bit + \begingroup + \noindent \titlefonts\rmisbold #1\par % the text + \let\lastnode=\empty % no node to associate with + \writetocentry{part}{#1}{}% but put it in the toc + \headingsoff % no headline or footline on the part page + \chapoddpage + \endgroup +} + +% \unnumberedno is an oxymoron. But we count the unnumbered % sections so that we can refer to them unambiguously in the pdf % outlines by their "section number". We avoid collisions with chapter % numbers by starting them at 10000. (If a document ever has 10000 @@ -4784,8 +5265,8 @@ end \chardef\maxseclevel = 3 % % A numbered section within an unnumbered changes to unnumbered too. -% To achive this, remember the "biggest" unnum. sec. we are currently in: -\chardef\unmlevel = \maxseclevel +% To achieve this, remember the "biggest" unnum. sec. we are currently in: +\chardef\unnlevel = \maxseclevel % % Trace whether the current chapter is an appendix or not: % \chapheadtype is "N" or "A", unnumbered chapters are ignored. @@ -4810,8 +5291,8 @@ end % The heading type: \def\headtype{#1}% \if \headtype U% - \ifnum \absseclevel < \unmlevel - \chardef\unmlevel = \absseclevel + \ifnum \absseclevel < \unnlevel + \chardef\unnlevel = \absseclevel \fi \else % Check for appendix sections: @@ -4823,10 +5304,10 @@ end \fi\fi \fi % Check for numbered within unnumbered: - \ifnum \absseclevel > \unmlevel + \ifnum \absseclevel > \unnlevel \def\headtype{U}% \else - \chardef\unmlevel = 3 + \chardef\unnlevel = 3 \fi \fi % Now print the heading: @@ -4880,7 +5361,9 @@ end \gdef\chaplevelprefix{\the\chapno.}% \resetallfloatnos % - \message{\putwordChapter\space \the\chapno}% + % \putwordChapter can contain complex things in translations. + \toks0=\expandafter{\putwordChapter}% + \message{\the\toks0 \space \the\chapno}% % % Write the actual heading. \chapmacro{#1}{Ynumbered}{\the\chapno}% @@ -4891,15 +5374,17 @@ end \global\let\subsubsection = \numberedsubsubsec } -\outer\parseargdef\appendix{\apphead0{#1}} % normally apphead0 calls appendixzzz +\outer\parseargdef\appendix{\apphead0{#1}} % normally calls appendixzzz +% \def\appendixzzz#1{% \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 \global\advance\appendixno by 1 \gdef\chaplevelprefix{\appendixletter.}% \resetallfloatnos % - \def\appendixnum{\putwordAppendix\space \appendixletter}% - \message{\appendixnum}% + % \putwordAppendix can contain complex things in translations. + \toks0=\expandafter{\putwordAppendix}% + \message{\the\toks0 \space \appendixletter}% % \chapmacro{#1}{Yappendix}{\appendixletter}% % @@ -4908,7 +5393,8 @@ end \global\let\subsubsection = \appendixsubsubsec } -\outer\parseargdef\unnumbered{\unnmhead0{#1}} % normally unnmhead0 calls unnumberedzzz +% normally unnmhead0 calls unnumberedzzz: +\outer\parseargdef\unnumbered{\unnmhead0{#1}} \def\unnumberedzzz#1{% \global\secno=0 \global\subsecno=0 \global\subsubsecno=0 \global\advance\unnumberedno by 1 @@ -4952,40 +5438,47 @@ end \let\top\unnumbered % Sections. +% \outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz \def\seczzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Ynumbered}{\the\chapno.\the\secno}% } -\outer\parseargdef\appendixsection{\apphead1{#1}} % normally calls appendixsectionzzz +% normally calls appendixsectionzzz: +\outer\parseargdef\appendixsection{\apphead1{#1}} \def\appendixsectionzzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Yappendix}{\appendixletter.\the\secno}% } \let\appendixsec\appendixsection -\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} % normally calls unnumberedseczzz +% normally calls unnumberedseczzz: +\outer\parseargdef\unnumberedsec{\unnmhead1{#1}} \def\unnumberedseczzz#1{% \global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1 \sectionheading{#1}{sec}{Ynothing}{\the\unnumberedno.\the\secno}% } % Subsections. -\outer\parseargdef\numberedsubsec{\numhead2{#1}} % normally calls numberedsubseczzz +% +% normally calls numberedsubseczzz: +\outer\parseargdef\numberedsubsec{\numhead2{#1}} \def\numberedsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Ynumbered}{\the\chapno.\the\secno.\the\subsecno}% } -\outer\parseargdef\appendixsubsec{\apphead2{#1}} % normally calls appendixsubseczzz +% normally calls appendixsubseczzz: +\outer\parseargdef\appendixsubsec{\apphead2{#1}} \def\appendixsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Yappendix}% {\appendixletter.\the\secno.\the\subsecno}% } -\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} %normally calls unnumberedsubseczzz +% normally calls unnumberedsubseczzz: +\outer\parseargdef\unnumberedsubsec{\unnmhead2{#1}} \def\unnumberedsubseczzz#1{% \global\subsubsecno=0 \global\advance\subsecno by 1 \sectionheading{#1}{subsec}{Ynothing}% @@ -4993,21 +5486,25 @@ end } % Subsubsections. -\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} % normally numberedsubsubseczzz +% +% normally numberedsubsubseczzz: +\outer\parseargdef\numberedsubsubsec{\numhead3{#1}} \def\numberedsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Ynumbered}% {\the\chapno.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} % normally appendixsubsubseczzz +% normally appendixsubsubseczzz: +\outer\parseargdef\appendixsubsubsec{\apphead3{#1}} \def\appendixsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Yappendix}% {\appendixletter.\the\secno.\the\subsecno.\the\subsubsecno}% } -\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} %normally unnumberedsubsubseczzz +% normally unnumberedsubsubseczzz: +\outer\parseargdef\unnumberedsubsubsec{\unnmhead3{#1}} \def\unnumberedsubsubseczzz#1{% \global\advance\subsubsecno by 1 \sectionheading{#1}{subsubsec}{Ynothing}% @@ -5031,7 +5528,6 @@ end % 3) Likewise, headings look best if no \parindent is used, and % if justification is not attempted. Hence \raggedright. - \def\majorheading{% {\advance\chapheadingskip by 10pt \chapbreak }% \parsearg\chapheadingzzz @@ -5040,8 +5536,8 @@ end \def\chapheading{\chapbreak \parsearg\chapheadingzzz} \def\chapheadingzzz#1{% {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}% + \parindent=0pt\ptexraggedright + \rmisbold #1\hfill}}% \bigskip \par\penalty 200\relax \suppressfirstparagraphindent } @@ -5058,14 +5554,13 @@ end % (including whitespace, linebreaking, etc. around it), % given all the information in convenient, parsed form. -%%% Args are the skip and penalty (usually negative) +% Args are the skip and penalty (usually negative) \def\dobreak#1#2{\par\ifdim\lastskip<#1\removelastskip\penalty#2\vskip#1\fi} -%%% Define plain chapter starts, and page on/off switching for it % Parameter controlling skip before chapter headings (if needed) - \newskip\chapheadingskip +% Define plain chapter starts, and page on/off switching for it. \def\chapbreak{\dobreak \chapheadingskip {-4000}} \def\chappager{\par\vfill\supereject} % Because \domark is called before \chapoddpage, the filler page will @@ -5075,9 +5570,8 @@ end \chappager \ifodd\pageno \else \begingroup - \evenheadline={\hfil}\evenfootline={\hfil}% - \oddheadline={\hfil}\oddfootline={\hfil}% - \hbox to 0pt{}% + \headingsoff + \null \chappager \endgroup \fi @@ -5133,7 +5627,10 @@ end \xdef\lastchapterdefs{% \gdef\noexpand\thischaptername{\the\toks0}% \gdef\noexpand\thischapternum{\appendixletter}% - \gdef\noexpand\thischapter{\putwordAppendix{} \noexpand\thischapternum: + % \noexpand\putwordAppendix avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordAppendix{} + \noexpand\thischapternum: \noexpand\thischaptername}% }% \else @@ -5141,7 +5638,10 @@ end \xdef\lastchapterdefs{% \gdef\noexpand\thischaptername{\the\toks0}% \gdef\noexpand\thischapternum{\the\chapno}% - \gdef\noexpand\thischapter{\putwordChapter{} \noexpand\thischapternum: + % \noexpand\putwordChapter avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thischapter{\noexpand\putwordChapter{} + \noexpand\thischapternum: \noexpand\thischaptername}% }% \fi\fi\fi @@ -5160,7 +5660,7 @@ end \domark % {% - \chapfonts \rm + \chapfonts \rmisbold % % Have to define \lastsection before calling \donoderef, because the % xref code eventually uses it. On the other hand, it has to be called @@ -5197,7 +5697,7 @@ end % % Typeset the actual heading. \nobreak % Avoid page breaks at the interline glue. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright \hangindent=\wd0 \centerparametersmaybe \unhbox0 #1\par}% }% @@ -5221,8 +5721,8 @@ end % \def\unnchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 - \parindent=0pt\raggedright - \rm #1\hfill}}\bigskip \par\nobreak + \parindent=0pt\ptexraggedright + \rmisbold #1\hfill}}\bigskip \par\nobreak } \def\chfopen #1#2{\chapoddpage {\chapfonts \vbox to 3in{\vfil \hbox to\hsize{\hfil #2} \hbox to\hsize{\hfil #1} \vfil}}% @@ -5231,7 +5731,7 @@ end \def\centerchfopen #1{% \chapoddpage {\chapfonts \vbox{\hyphenpenalty=10000\tolerance=5000 \parindent=0pt - \hfill {\rm #1}\hfill}}\bigskip \par\nobreak + \hfill {\rmisbold #1}\hfill}}\bigskip \par\nobreak } \def\CHAPFopen{% \global\let\chapmacro=\chfopen @@ -5263,8 +5763,10 @@ end % \def\sectionheading#1#2#3#4{% {% + \checkenv{}% should not be in an environment. + % % Switch to the right set of fonts. - \csname #2fonts\endcsname \rm + \csname #2fonts\endcsname \rmisbold % \def\sectionlevel{#2}% \def\temptype{#3}% @@ -5284,7 +5786,10 @@ end \xdef\lastsectiondefs{% \gdef\noexpand\thissectionname{\the\toks0}% \gdef\noexpand\thissectionnum{#4}% - \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum: + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: \noexpand\thissectionname}% }% \fi @@ -5294,12 +5799,20 @@ end \xdef\lastsectiondefs{% \gdef\noexpand\thissectionname{\the\toks0}% \gdef\noexpand\thissectionnum{#4}% - \gdef\noexpand\thissection{\putwordSection{} \noexpand\thissectionnum: + % \noexpand\putwordSection avoids expanding indigestible + % commands in some of the translations. + \gdef\noexpand\thissection{\noexpand\putwordSection{} + \noexpand\thissectionnum: \noexpand\thissectionname}% }% \fi \fi\fi\fi % + % Go into vertical mode. Usually we'll already be there, but we + % don't want the following whatsit to end up in a preceding paragraph + % if the document didn't happen to have a blank line. + \par + % % Output the mark. Pass it through \safewhatsit, to take care of % the preceding space. \safewhatsit\domark @@ -5349,7 +5862,7 @@ end \nobreak % % Output the actual section heading. - \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \raggedright + \vbox{\hyphenpenalty=10000 \tolerance=5000 \parindent=0pt \ptexraggedright \hangindent=\wd0 % zero if no section number \unhbox0 #1}% }% @@ -5365,11 +5878,10 @@ end % glue accumulate. (Not a breakpoint because it's preceded by a % discardable item.) \vskip-\parskip - % + % % This is purely so the last item on the list is a known \penalty > % 10000. This is so \startdefun can avoid allowing breakpoints after % section headings. Otherwise, it would insert a valid breakpoint between: - % % @section sec-whatever % @deffn def-whatever \penalty 10001 @@ -5427,7 +5939,7 @@ end % These characters do not print properly in the Computer Modern roman % fonts, so we must take special care. This is more or less redundant % with the Texinfo input format setup at the end of this file. -% +% \def\activecatcodes{% \catcode`\"=\active \catcode`\$=\active @@ -5477,7 +5989,7 @@ end % redefined for the two-volume lispref. We always output on % \jobname.toc even if this is redefined. -% +% \def\tocreadfilename{\jobname.toc} % Normal (long) toc. @@ -5503,6 +6015,7 @@ end \def\summarycontents{% \startcontents{\putwordShortTOC}% % + \let\partentry = \shortpartentry \let\numchapentry = \shortchapentry \let\appentry = \shortchapentry \let\unnchapentry = \shortunnchapentry @@ -5558,6 +6071,19 @@ end % The last argument is the page number. % The arguments in between are the chapter number, section number, ... +% Parts, in the main contents. Replace the part number, which doesn't +% exist, with an empty box. Let's hope all the numbers have the same width. +% Also ignore the page number, which is conventionally not printed. +\def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}} +\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}} +% +% Parts, in the short toc. +\def\shortpartentry#1#2#3#4{% + \penalty-300 + \vskip.5\baselineskip plus.15\baselineskip minus.1\baselineskip + \shortchapentry{{\bf #1}}{\numeralbox}{}{}% +} + % Chapters, in the main contents. \def\numchapentry#1#2#3#4{\dochapentry{#2\labelspace#1}{#4}} % @@ -5627,65 +6153,32 @@ end \def\dosubsubsecentry#1#2{\begingroup \subsubsecentryfonts \leftskip=3\tocindent \tocentry{#1}{\dopageno\bgroup#2\egroup}% -\endgroup} - -% We use the same \entry macro as for the index entries. -\let\tocentry = \entry - -% Space between chapter (or whatever) number and the title. -\def\labelspace{\hskip1em \relax} - -\def\dopageno#1{{\rm #1}} -\def\doshortpageno#1{{\rm #1}} - -\def\chapentryfonts{\secfonts \rm} -\def\secentryfonts{\textfonts} -\def\subsecentryfonts{\textfonts} -\def\subsubsecentryfonts{\textfonts} - - -\message{environments,} -% @foo ... @end foo. - -% @point{}, @result{}, @expansion{}, @print{}, @equiv{}. -% -% Since these characters are used in examples, it should be an even number of -% \tt widths. Each \tt character is 1en, so two makes it 1em. -% -\def\point{$\star$} -\def\result{\leavevmode\raise.15ex\hbox to 1em{\hfil$\Rightarrow$\hfil}} -\def\expansion{\leavevmode\raise.1ex\hbox to 1em{\hfil$\mapsto$\hfil}} -\def\print{\leavevmode\lower.1ex\hbox to 1em{\hfil$\dashv$\hfil}} -\def\equiv{\leavevmode\lower.1ex\hbox to 1em{\hfil$\ptexequiv$\hfil}} - -% The @error{} command. -% Adapted from the TeXbook's \boxit. -% -\newbox\errorbox -% -{\tentt \global\dimen0 = 3em}% Width of the box. -\dimen2 = .55pt % Thickness of rules -% The text. (`r' is open on the right, `e' somewhat less so on the left.) -\setbox0 = \hbox{\kern-.75pt \reducedsf error\kern-1.5pt} -% -\setbox\errorbox=\hbox to \dimen0{\hfil - \hsize = \dimen0 \advance\hsize by -5.8pt % Space to left+right. - \advance\hsize by -2\dimen2 % Rules. - \vbox{% - \hrule height\dimen2 - \hbox{\vrule width\dimen2 \kern3pt % Space to left of text. - \vtop{\kern2.4pt \box0 \kern2.4pt}% Space above/below. - \kern3pt\vrule width\dimen2}% Space to right. - \hrule height\dimen2} - \hfil} -% -\def\error{\leavevmode\lower.7ex\copy\errorbox} +\endgroup} + +% We use the same \entry macro as for the index entries. +\let\tocentry = \entry + +% Space between chapter (or whatever) number and the title. +\def\labelspace{\hskip1em \relax} + +\def\dopageno#1{{\rm #1}} +\def\doshortpageno#1{{\rm #1}} + +\def\chapentryfonts{\secfonts \rm} +\def\secentryfonts{\textfonts} +\def\subsecentryfonts{\textfonts} +\def\subsubsecentryfonts{\textfonts} + -% @tex ... @end tex escapes into raw Tex temporarily. +\message{environments,} +% @foo ... @end foo. + +% @tex ... @end tex escapes into raw TeX temporarily. % One exception: @ is still an escape character, so that @end tex works. -% But \@ or @@ will get a plain tex @ character. +% But \@ or @@ will get a plain @ character. \envdef\tex{% + \setupmarkupstyle{tex}% \catcode `\\=0 \catcode `\{=1 \catcode `\}=2 \catcode `\$=3 \catcode `\&=4 \catcode `\#=6 \catcode `\^=7 \catcode `\_=8 \catcode `\~=\active \let~=\tie @@ -5695,8 +6188,14 @@ end \catcode `\|=\other \catcode `\<=\other \catcode `\>=\other + \catcode`\`=\other + \catcode`\'=\other \escapechar=`\\ % + % ' is active in math mode (mathcode"8000). So reset it, and all our + % other math active characters (just in case), to plain's definitions. + \mathactive + % \let\b=\ptexb \let\bullet=\ptexbullet \let\c=\ptexc @@ -5714,6 +6213,7 @@ end \let\/=\ptexslash \let\*=\ptexstar \let\t=\ptext + \expandafter \let\csname top\endcsname=\ptextop % outer \let\frenchspacing=\plainfrenchspacing % \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}% @@ -5799,6 +6299,12 @@ end \normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip % Flag to tell @lisp, etc., not to narrow margin. \let\nonarrowing = t% + % + % If this cartouche directly follows a sectioning command, we need the + % \parskip glue (backspaced over by default) or the cartouche can + % collide with the section heading. + \ifnum\lastpenalty>10000 \vskip\parskip \fi + % \vbox\bgroup \baselineskip=0pt\parskip=0pt\lineskip=0pt \carttop @@ -5812,7 +6318,7 @@ end \lineskip=\normlskip \parskip=\normpskip \vskip -\parskip - \comment % For explanation, see the end of \def\group. + \comment % For explanation, see the end of def\group. } \def\Ecartouche{% \ifhmode\par\fi @@ -5829,6 +6335,7 @@ end % This macro is called at the beginning of all the @example variants, % inside a group. +\newdimen\nonfillparindent \def\nonfillstart{% \aboveenvbreak \hfuzz = 12pt % Don't be fussy @@ -5836,7 +6343,12 @@ end \let\par = \lisppar % don't ignore blank lines \obeylines % each line of input is a line of output \parskip = 0pt + % Turn off paragraph indentation but redefine \indent to emulate + % the normal \indent. + \nonfillparindent=\parindent \parindent = 0pt + \let\indent\nonfillindent + % \emergencystretch = 0pt % don't try to avoid overfull boxes \ifx\nonarrowing\relax \advance \leftskip by \lispnarrowing @@ -5847,6 +6359,24 @@ end \let\exdent=\nofillexdent } +\begingroup +\obeyspaces +% We want to swallow spaces (but not other tokens) after the fake +% @indent in our nonfill-environments, where spaces are normally +% active and set to @tie, resulting in them not being ignored after +% @indent. +\gdef\nonfillindent{\futurelet\temp\nonfillindentcheck}% +\gdef\nonfillindentcheck{% +\ifx\temp % +\expandafter\nonfillindentgobble% +\else% +\leavevmode\nonfillindentbox% +\fi% +}% +\endgroup +\def\nonfillindentgobble#1{\nonfillindent} +\def\nonfillindentbox{\hbox to \nonfillparindent{\hss}} + % If you want all examples etc. small: @set dispenvsize small. % If you want even small examples the full size: @set dispenvsize nosmall. % This affects the following displayed environments: @@ -5874,41 +6404,42 @@ end } % We often define two environments, @foo and @smallfoo. -% Let's do it by one command: -\def\makedispenv #1#2{ - \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2} - \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2} +% Let's do it in one command. #1 is the env name, #2 the definition. +\def\makedispenvdef#1#2{% + \expandafter\envdef\csname#1\endcsname {\setnormaldispenv #2}% + \expandafter\envdef\csname small#1\endcsname {\setsmalldispenv #2}% \expandafter\let\csname E#1\endcsname \afterenvbreak \expandafter\let\csname Esmall#1\endcsname \afterenvbreak } -% Define two synonyms: -\def\maketwodispenvs #1#2#3{ - \makedispenv{#1}{#3} - \makedispenv{#2}{#3} +% Define two environment synonyms (#1 and #2) for an environment. +\def\maketwodispenvdef#1#2#3{% + \makedispenvdef{#1}{#3}% + \makedispenvdef{#2}{#3}% } - -% @lisp: indented, narrowed, typewriter font; @example: same as @lisp. +% +% @lisp: indented, narrowed, typewriter font; +% @example: same as @lisp. % % @smallexample and @smalllisp: use smaller fonts. % Originally contributed by Pavel@xerox. % -\maketwodispenvs {lisp}{example}{% +\maketwodispenvdef{lisp}{example}{% \nonfillstart - \tt\quoteexpand + \tt\setupmarkupstyle{example}% \let\kbdfont = \kbdexamplefont % Allow @kbd to do something special. - \gobble % eat return + \gobble % eat return } % @display/@smalldisplay: same as @lisp except keep current font. % -\makedispenv {display}{% +\makedispenvdef{display}{% \nonfillstart \gobble } % @format/@smallformat: same as @display except don't narrow margins. % -\makedispenv{format}{% +\makedispenvdef{format}{% \let\nonarrowing = t% \nonfillstart \gobble @@ -5927,18 +6458,44 @@ end \envdef\flushright{% \let\nonarrowing = t% \nonfillstart - \advance\leftskip by 0pt plus 1fill + \advance\leftskip by 0pt plus 1fill\relax \gobble } \let\Eflushright = \afterenvbreak +% @raggedright does more-or-less normal line breaking but no right +% justification. From plain.tex. +\envdef\raggedright{% + \rightskip0pt plus2em \spaceskip.3333em \xspaceskip.5em\relax +} +\let\Eraggedright\par + +\envdef\raggedleft{% + \parindent=0pt \leftskip0pt plus2em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedleft\par + +\envdef\raggedcenter{% + \parindent=0pt \rightskip0pt plus1em \leftskip0pt plus1em + \spaceskip.3333em \xspaceskip.5em \parfillskip=0pt + \hbadness=10000 % Last line will usually be underfull, so turn off + % badness reporting. +} +\let\Eraggedcenter\par + + % @quotation does normal linebreaking (hence we can't use \nonfillstart) % and narrows the margins. We keep \parskip nonzero in general, since % we're doing normal filling. So, when using \aboveenvbreak and % \afterenvbreak, temporarily make \parskip 0. % -\envdef\quotation{% +\makedispenvdef{quotation}{\quotationstart} +% +\def\quotationstart{% {\parskip=0pt \aboveenvbreak}% because \aboveenvbreak inserts \parskip \parindent=0pt % @@ -5958,12 +6515,13 @@ end % \def\Equotation{% \par - \ifx\quotationauthor\undefined\else + \ifx\quotationauthor\thisisundefined\else % indent a bit. \leftline{\kern 2\leftskip \sl ---\quotationauthor}% \fi {\parskip=0pt \afterenvbreak}% } +\def\Esmallquotation{\Equotation} % If we're given an argument, typeset it in bold with a colon after. \def\quotationlabel#1{% @@ -5988,18 +6546,16 @@ end \do\ \do\\\do\{\do\}\do\$\do\&% \do\#\do\^\do\^^K\do\_\do\^^A\do\%\do\~% \do\<\do\>\do\|\do\@\do+\do\"% + % Don't do the quotes -- if we do, @set txicodequoteundirected and + % @set txicodequotebacktick will not have effect on @verb and + % @verbatim, and ?` and !` ligatures won't get disabled. + %\do\`\do\'% } % % [Knuth] p. 380 \def\uncatcodespecials{% \def\do##1{\catcode`##1=\other}\dospecials} % -% [Knuth] pp. 380,381,391 -% Disable Spanish ligatures ?` and !` of \tt font -\begingroup - \catcode`\`=\active\gdef`{\relax\lq} -\endgroup -% % Setup for the @verb command. % % Eight spaces for a tab @@ -6011,7 +6567,7 @@ end \def\setupverb{% \tt % easiest (and conventionally used) font for verbatim \def\par{\leavevmode\endgraf}% - \catcode`\`=\active + \setupmarkupstyle{verb}% \tabeightspaces % Respect line breaks, % print special symbols as themselves, and @@ -6022,73 +6578,46 @@ end % Setup for the @verbatim environment % -% Real tab expansion +% Real tab expansion. \newdimen\tabw \setbox0=\hbox{\tt\space} \tabw=8\wd0 % tab amount % -\def\starttabbox{\setbox0=\hbox\bgroup} - -% Allow an option to not replace quotes with a regular directed right -% quote/apostrophe (char 0x27), but instead use the undirected quote -% from cmtt (char 0x0d). The undirected quote is ugly, so don't make it -% the default, but it works for pasting with more pdf viewers (at least -% evince), the lilypond developers report. xpdf does work with the -% regular 0x27. -% -\def\codequoteright{% - \expandafter\ifx\csname SETtxicodequoteundirected\endcsname\relax - \expandafter\ifx\csname SETcodequoteundirected\endcsname\relax - '% - \else \char'15 \fi - \else \char'15 \fi -} -% -% and a similar option for the left quote char vs. a grave accent. -% Modern fonts display ASCII 0x60 as a grave accent, so some people like -% the code environments to do likewise. -% -\def\codequoteleft{% - \expandafter\ifx\csname SETtxicodequotebacktick\endcsname\relax - \expandafter\ifx\csname SETcodequotebacktick\endcsname\relax - `% - \else \char'22 \fi - \else \char'22 \fi -} +% We typeset each line of the verbatim in an \hbox, so we can handle +% tabs. The \global is in case the verbatim line starts with an accent, +% or some other command that starts with a begin-group. Otherwise, the +% entire \verbbox would disappear at the corresponding end-group, before +% it is typeset. Meanwhile, we can't have nested verbatim commands +% (can we?), so the \global won't be overwriting itself. +\newbox\verbbox +\def\starttabbox{\global\setbox\verbbox=\hbox\bgroup} % \begingroup \catcode`\^^I=\active \gdef\tabexpand{% \catcode`\^^I=\active \def^^I{\leavevmode\egroup - \dimen0=\wd0 % the width so far, or since the previous tab - \divide\dimen0 by\tabw - \multiply\dimen0 by\tabw % compute previous multiple of \tabw - \advance\dimen0 by\tabw % advance to next multiple of \tabw - \wd0=\dimen0 \box0 \starttabbox + \dimen\verbbox=\wd\verbbox % the width so far, or since the previous tab + \divide\dimen\verbbox by\tabw + \multiply\dimen\verbbox by\tabw % compute previous multiple of \tabw + \advance\dimen\verbbox by\tabw % advance to next multiple of \tabw + \wd\verbbox=\dimen\verbbox \box\verbbox \starttabbox }% } - \catcode`\'=\active - \gdef\rquoteexpand{\catcode\rquoteChar=\active \def'{\codequoteright}}% - % - \catcode`\`=\active - \gdef\lquoteexpand{\catcode\lquoteChar=\active \def`{\codequoteleft}}% - % - \gdef\quoteexpand{\rquoteexpand \lquoteexpand}% \endgroup % start the verbatim environment. \def\setupverbatim{% \let\nonarrowing = t% \nonfillstart - % Easiest (and conventionally used) font for verbatim - \tt - \def\par{\leavevmode\egroup\box0\endgraf}% - \catcode`\`=\active + \tt % easiest (and conventionally used) font for verbatim + % The \leavevmode here is for blank lines. Otherwise, we would + % never \starttabox and the \egroup would end verbatim mode. + \def\par{\leavevmode\egroup\box\verbbox\endgraf}% \tabexpand - \quoteexpand + \setupmarkupstyle{verbatim}% % Respect line breaks, % print special symbols as themselves, and - % make each space count - % must do in this order: + % make each space count. + % Must do in this order: \obeylines \uncatcodespecials \sepspaces \everypar{\starttabbox}% } @@ -6144,6 +6673,8 @@ end {% \makevalueexpandable \setupverbatim + \indexnofonts % Allow `@@' and other weird things in file names. + \wlog{texinfo.tex: doing @verbatiminclude of #1^^J}% \input #1 \afterenvbreak }% @@ -6193,7 +6724,7 @@ end % commands also insert a nobreak penalty, and we don't want to allow % a break between a section heading and a defun. % - % As a minor refinement, we avoid "club" headers by signalling + % As a further refinement, we avoid "club" headers by signalling % with penalty of 10003 after the very first @deffn in the % sequence (see above), and penalty of 10002 after any following % @def command. @@ -6230,7 +6761,7 @@ end #1#2 \endheader % common ending: \interlinepenalty = 10000 - \advance\rightskip by 0pt plus 1fil + \advance\rightskip by 0pt plus 1fil\relax \endgraf \nobreak\vskip -\parskip \penalty\defunpenalty % signal to \startdefun and \dodefunx @@ -6243,7 +6774,7 @@ end \def\Edefun{\endgraf\medbreak} % \makedefun{deffn} creates \deffn, \deffnx and \Edeffn; -% the only thing remainnig is to define \deffnheader. +% the only thing remaining is to define \deffnheader. % \def\makedefun#1{% \expandafter\let\csname E#1\endcsname = \Edefun @@ -6260,13 +6791,36 @@ end \def\domakedefun#1#2#3{% \envdef#1{% \startdefun + \doingtypefnfalse % distinguish typed functions from all else \parseargusing\activeparens{\printdefunline#3}% }% \def#2{\dodefunx#1}% \def#3% } -%%% Untyped functions: +\newif\ifdoingtypefn % doing typed function? +\newif\ifrettypeownline % typeset return type on its own line? + +% @deftypefnnewline on|off says whether the return type of typed functions +% are printed on their own line. This affects @deftypefn, @deftypefun, +% @deftypeop, and @deftypemethod. +% +\parseargdef\deftypefnnewline{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETtxideftypefnnl\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @txideftypefnnl value `\temp', + must be on|off}% + \fi\fi +} + +% Untyped functions: % @deffn category name args \makedefun{deffn}{\deffngeneral{}} @@ -6285,7 +6839,7 @@ end \defname{#2}{}{#3}\magicamp\defunargs{#4\unskip}% } -%%% Typed functions: +% Typed functions: % @deftypefn category type name args \makedefun{deftypefn}{\deftypefngeneral{}} @@ -6300,10 +6854,11 @@ end % \def\deftypefngeneral#1#2 #3 #4 #5\endheader{% \dosubind{fn}{\code{#4}}{#1}% + \doingtypefntrue \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -%%% Typed variables: +% Typed variables: % @deftypevr category type var args \makedefun{deftypevr}{\deftypecvgeneral{}} @@ -6321,7 +6876,7 @@ end \defname{#2}{#3}{#4}\defunargs{#5\unskip}% } -%%% Untyped variables: +% Untyped variables: % @defvr category var args \makedefun{defvr}#1 {\deftypevrheader{#1} {} } @@ -6332,7 +6887,8 @@ end % \defcvof {category of}class var args \def\defcvof#1#2 {\deftypecvof{#1}#2 {} } -%%% Type: +% Types: + % @deftp category name args \makedefun{deftp}#1 #2 #3\endheader{% \doind{tp}{\code{#2}}% @@ -6360,25 +6916,49 @@ end % We are followed by (but not passed) the arguments, if any. % \def\defname#1#2#3{% + \par % Get the values of \leftskip and \rightskip as they were outside the @def... \advance\leftskip by -\defbodyindent % - % How we'll format the type name. Putting it in brackets helps + % Determine if we are typesetting the return type of a typed function + % on a line by itself. + \rettypeownlinefalse + \ifdoingtypefn % doing a typed function specifically? + % then check user option for putting return type on its own line: + \expandafter\ifx\csname SETtxideftypefnnl\endcsname\relax \else + \rettypeownlinetrue + \fi + \fi + % + % How we'll format the category name. Putting it in brackets helps % distinguish it from the body text that may end up on the next line % just below it. \def\temp{#1}% \setbox0=\hbox{\kern\deflastargmargin \ifx\temp\empty\else [\rm\temp]\fi} % - % Figure out line sizes for the paragraph shape. + % Figure out line sizes for the paragraph shape. We'll always have at + % least two. + \tempnum = 2 + % % The first line needs space for \box0; but if \rightskip is nonzero, % we need only space for the part of \box0 which exceeds it: \dimen0=\hsize \advance\dimen0 by -\wd0 \advance\dimen0 by \rightskip + % + % If doing a return type on its own line, we'll have another line. + \ifrettypeownline + \advance\tempnum by 1 + \def\maybeshapeline{0in \hsize}% + \else + \def\maybeshapeline{}% + \fi + % % The continuations: \dimen2=\hsize \advance\dimen2 by -\defargsindent - % (plain.tex says that \dimen1 should be used only as global.) - \parshape 2 0in \dimen0 \defargsindent \dimen2 % - % Put the type name to the right margin. + % The final paragraph shape: + \parshape \tempnum 0in \dimen0 \maybeshapeline \defargsindent \dimen2 + % + % Put the category name at the right margin. \noindent \hbox to 0pt{% \hfil\box0 \kern-\hsize @@ -6400,8 +6980,16 @@ end % . this still does not fix the ?` and !` ligatures, but so far no % one has made identifiers using them :). \df \tt - \def\temp{#2}% return value type - \ifx\temp\empty\else \tclose{\temp} \fi + \def\temp{#2}% text of the return type + \ifx\temp\empty\else + \tclose{\temp}% typeset the return type + \ifrettypeownline + % put return type on its own line; prohibit line break following: + \hfil\vadjust{\nobreak}\break + \else + \space % type on same line, so just followed by a space + \fi + \fi % no return type #3% output function name }% {\rm\enskip}% hskip 0.5 em of \tenrm @@ -6422,7 +7010,7 @@ end % % On the other hand, if an argument has two dashes (for instance), we % want a way to get ttsl. Let's try @var for that. - \let\var=\ttslanted + \def\var##1{{\setupmarkupstyle{var}\ttslanted{##1}}}% #1% \sl\hyphenchar\font=45 } @@ -6519,7 +7107,7 @@ end % To do this right we need a feature of e-TeX, \scantokens, % which we arrange to emulate with a temporary file in ordinary TeX. -\ifx\eTeXversion\undefined +\ifx\eTeXversion\thisisundefined \newwrite\macscribble \def\scantokens#1{% \toks0={#1}% @@ -6530,25 +7118,30 @@ end } \fi -\def\scanmacro#1{% - \begingroup - \newlinechar`\^^M - \let\xeatspaces\eatspaces - % Undo catcode changes of \startcontents and \doprintindex - % When called from @insertcopying or (short)caption, we need active - % backslash to get it printed correctly. Previously, we had - % \catcode`\\=\other instead. We'll see whether a problem appears - % with macro expansion. --kasal, 19aug04 - \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ - % ... and \example - \spaceisspace - % - % Append \endinput to make sure that TeX does not see the ending newline. - % I've verified that it is necessary both for e-TeX and for ordinary TeX - % --kasal, 29nov03 - \scantokens{#1\endinput}% - \endgroup -} +\def\scanmacro#1{\begingroup + \newlinechar`\^^M + \let\xeatspaces\eatspaces + % + % Undo catcode changes of \startcontents and \doprintindex + % When called from @insertcopying or (short)caption, we need active + % backslash to get it printed correctly. Previously, we had + % \catcode`\\=\other instead. We'll see whether a problem appears + % with macro expansion. --kasal, 19aug04 + \catcode`\@=0 \catcode`\\=\active \escapechar=`\@ + % + % ... and for \example: + \spaceisspace + % + % The \empty here causes a following catcode 5 newline to be eaten as + % part of reading whitespace after a control sequence. It does not + % eat a catcode 13 newline. There's no good way to handle the two + % cases (untried: maybe e-TeX's \everyeof could help, though plain TeX + % would then have different behavior). See the Macro Details node in + % the manual for the workaround we recommend for macros and + % line-oriented commands. + % + \scantokens{#1\empty}% +\endgroup} \def\scanexp#1{% \edef\temp{\noexpand\scanmacro{#1}}% @@ -6576,7 +7169,7 @@ end % This does \let #1 = #2, with \csnames; that is, % \let \csname#1\endcsname = \csname#2\endcsname % (except of course we have to play expansion games). -% +% \def\cslet#1#2{% \expandafter\let \csname#1\expandafter\endcsname @@ -6602,17 +7195,18 @@ end % Macro bodies are absorbed as an argument in a context where % all characters are catcode 10, 11 or 12, except \ which is active -% (as in normal texinfo). It is necessary to change the definition of \. - +% (as in normal texinfo). It is necessary to change the definition of \ +% to recognize macro arguments; this is the job of \mbodybackslash. +% % Non-ASCII encodings make 8-bit characters active, so un-activate % them to avoid their expansion. Must do this non-globally, to % confine the change to the current group. - +% % It's necessary to have hard CRs when the macro is executed. This is -% done by making ^^M (\endlinechar) catcode 12 when reading the macro +% done by making ^^M (\endlinechar) catcode 12 when reading the macro % body, and then making it the \newlinechar in \scanmacro. - -\def\scanctxt{% +% +\def\scanctxt{% used as subroutine \catcode`\"=\other \catcode`\+=\other \catcode`\<=\other @@ -6625,13 +7219,13 @@ end \ifx\declaredencoding\ascii \else \setnonasciicharscatcodenonglobal\other \fi } -\def\scanargctxt{% +\def\scanargctxt{% used for copying and captions, not macros. \scanctxt \catcode`\\=\other \catcode`\^^M=\other } -\def\macrobodyctxt{% +\def\macrobodyctxt{% used for @macro definitions \scanctxt \catcode`\{=\other \catcode`\}=\other @@ -6639,32 +7233,56 @@ end \usembodybackslash } -\def\macroargctxt{% +\def\macroargctxt{% used when scanning invocations \scanctxt - \catcode`\\=\other + \catcode`\\=0 } +% why catcode 0 for \ in the above? To recognize \\ \{ \} as "escapes" +% for the single characters \ { }. Thus, we end up with the "commands" +% that would be written @\ @{ @} in a Texinfo document. +% +% We already have @{ and @}. For @\, we define it here, and only for +% this purpose, to produce a typewriter backslash (so, the @\ that we +% define for @math can't be used with @macro calls): +% +\def\\{\normalbackslash}% +% +% We would like to do this for \, too, since that is what makeinfo does. +% But it is not possible, because Texinfo already has a command @, for a +% cedilla accent. Documents must use @comma{} instead. +% +% \anythingelse will almost certainly be an error of some kind. + % \mbodybackslash is the definition of \ in @macro bodies. % It maps \foo\ => \csname macarg.foo\endcsname => #N % where N is the macro parameter number. % We define \csname macarg.\endcsname to be \realbackslash, so % \\ in macro replacement text gets you a backslash. - +% {\catcode`@=0 @catcode`@\=@active @gdef@usembodybackslash{@let\=@mbodybackslash} @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname} } \expandafter\def\csname macarg.\endcsname{\realbackslash} +\def\margbackslash#1{\char`\#1 } + \def\macro{\recursivefalse\parsearg\macroxxx} \def\rmacro{\recursivetrue\parsearg\macroxxx} \def\macroxxx#1{% - \getargs{#1}% now \macname is the macname and \argl the arglist + \getargs{#1}% now \macname is the macname and \argl the arglist \ifx\argl\empty % no arguments - \paramno=0% + \paramno=0\relax \else \expandafter\parsemargdef \argl;% + \if\paramno>256\relax + \ifx\eTeXversion\thisisundefined + \errhelp = \EMsimple + \errmessage{You need eTeX to compile a file with macros with more than 256 arguments} + \fi + \fi \fi \if1\csname ismacro.\the\macname\endcsname \message{Warning: redefining \the\macname}% @@ -6711,46 +7329,269 @@ end % an opening brace, and that opening brace is not consumed. \def\getargs#1{\getargsxxx#1{}} \def\getargsxxx#1#{\getmacname #1 \relax\getmacargs} -\def\getmacname #1 #2\relax{\macname={#1}} +\def\getmacname#1 #2\relax{\macname={#1}} \def\getmacargs#1{\def\argl{#1}} +% For macro processing make @ a letter so that we can make Texinfo private macro names. +\edef\texiatcatcode{\the\catcode`\@} +\catcode `@=11\relax + % Parse the optional {params} list. Set up \paramno and \paramlist -% so \defmacro knows what to do. Define \macarg.blah for each blah -% in the params list, to be ##N where N is the position in that list. +% so \defmacro knows what to do. Define \macarg.BLAH for each BLAH +% in the params list to some hook where the argument si to be expanded. If +% there are less than 10 arguments that hook is to be replaced by ##N where N +% is the position in that list, that is to say the macro arguments are to be +% defined `a la TeX in the macro body. +% % That gets used by \mbodybackslash (above). - +% % We need to get `macro parameter char #' into several definitions. -% The technique used is stolen from LaTeX: let \hash be something +% The technique used is stolen from LaTeX: let \hash be something % unexpandable, insert that wherever you need a #, and then redefine % it to # just before using the token list produced. % % The same technique is used to protect \eatspaces till just before % the macro is used. - -\def\parsemargdef#1;{\paramno=0\def\paramlist{}% - \let\hash\relax\let\xeatspaces\relax\parsemargdefxxx#1,;,} +% +% If there are 10 or more arguments, a different technique is used, where the +% hook remains in the body, and when macro is to be expanded the body is +% processed again to replace the arguments. +% +% In that case, the hook is \the\toks N-1, and we simply set \toks N-1 to the +% argument N value and then \edef the body (nothing else will expand because of +% the catcode regime underwhich the body was input). +% +% If you compile with TeX (not eTeX), and you have macros with 10 or more +% arguments, you need that no macro has more than 256 arguments, otherwise an +% error is produced. +\def\parsemargdef#1;{% + \paramno=0\def\paramlist{}% + \let\hash\relax + \let\xeatspaces\relax + \parsemargdefxxx#1,;,% + % In case that there are 10 or more arguments we parse again the arguments + % list to set new definitions for the \macarg.BLAH macros corresponding to + % each BLAH argument. It was anyhow needed to parse already once this list + % in order to count the arguments, and as macros with at most 9 arguments + % are by far more frequent than macro with 10 or more arguments, defining + % twice the \macarg.BLAH macros does not cost too much processing power. + \ifnum\paramno<10\relax\else + \paramno0\relax + \parsemmanyargdef@@#1,;,% 10 or more arguments + \fi +} \def\parsemargdefxxx#1,{% \if#1;\let\next=\relax \else \let\next=\parsemargdefxxx - \advance\paramno by 1% + \advance\paramno by 1 \expandafter\edef\csname macarg.\eatspaces{#1}\endcsname {\xeatspaces{\hash\the\paramno}}% \edef\paramlist{\paramlist\hash\the\paramno,}% \fi\next} +\def\parsemmanyargdef@@#1,{% + \if#1;\let\next=\relax + \else + \let\next=\parsemmanyargdef@@ + \edef\tempb{\eatspaces{#1}}% + \expandafter\def\expandafter\tempa + \expandafter{\csname macarg.\tempb\endcsname}% + % Note that we need some extra \noexpand\noexpand, this is because we + % don't want \the to be expanded in the \parsermacbody as it uses an + % \xdef . + \expandafter\edef\tempa + {\noexpand\noexpand\noexpand\the\toks\the\paramno}% + \advance\paramno by 1\relax + \fi\next} + % These two commands read recursive and nonrecursive macro bodies. % (They're different since rec and nonrec macros end differently.) +% +\catcode `\@\texiatcatcode \long\def\parsemacbody#1@end macro% {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% \long\def\parsermacbody#1@end rmacro% {\xdef\temp{\eatcr{#1}}\endgroup\defmacro}% +\catcode `\@=11\relax + +\let\endargs@\relax +\let\nil@\relax +\def\nilm@{\nil@}% +\long\def\nillm@{\nil@}% + +% This macro is expanded during the Texinfo macro expansion, not during its +% definition. It gets all the arguments values and assigns them to macros +% macarg.ARGNAME +% +% #1 is the macro name +% #2 is the list of argument names +% #3 is the list of argument values +\def\getargvals@#1#2#3{% + \def\macargdeflist@{}% + \def\saveparamlist@{#2}% Need to keep a copy for parameter expansion. + \def\paramlist{#2,\nil@}% + \def\macroname{#1}% + \begingroup + \macroargctxt + \def\argvaluelist{#3,\nil@}% + \def\@tempa{#3}% + \ifx\@tempa\empty + \setemptyargvalues@ + \else + \getargvals@@ + \fi +} + +% +\def\getargvals@@{% + \ifx\paramlist\nilm@ + % Some sanity check needed here that \argvaluelist is also empty. + \ifx\argvaluelist\nillm@ + \else + \errhelp = \EMsimple + \errmessage{Too many arguments in macro `\macroname'!}% + \fi + \let\next\macargexpandinbody@ + \else + \ifx\argvaluelist\nillm@ + % No more arguments values passed to macro. Set remaining named-arg + % macros to empty. + \let\next\setemptyargvalues@ + \else + % pop current arg name into \@tempb + \def\@tempa##1{\pop@{\@tempb}{\paramlist}##1\endargs@}% + \expandafter\@tempa\expandafter{\paramlist}% + % pop current argument value into \@tempc + \def\@tempa##1{\longpop@{\@tempc}{\argvaluelist}##1\endargs@}% + \expandafter\@tempa\expandafter{\argvaluelist}% + % Here \@tempb is the current arg name and \@tempc is the current arg value. + % First place the new argument macro definition into \@tempd + \expandafter\macname\expandafter{\@tempc}% + \expandafter\let\csname macarg.\@tempb\endcsname\relax + \expandafter\def\expandafter\@tempe\expandafter{% + \csname macarg.\@tempb\endcsname}% + \edef\@tempd{\long\def\@tempe{\the\macname}}% + \push@\@tempd\macargdeflist@ + \let\next\getargvals@@ + \fi + \fi + \next +} + +\def\push@#1#2{% + \expandafter\expandafter\expandafter\def + \expandafter\expandafter\expandafter#2% + \expandafter\expandafter\expandafter{% + \expandafter#1#2}% +} + +% Replace arguments by their values in the macro body, and place the result +% in macro \@tempa +\def\macvalstoargs@{% + % To do this we use the property that token registers that are \the'ed + % within an \edef expand only once. So we are going to place all argument + % values into respective token registers. + % + % First we save the token context, and initialize argument numbering. + \begingroup + \paramno0\relax + % Then, for each argument number #N, we place the corresponding argument + % value into a new token list register \toks#N + \expandafter\putargsintokens@\saveparamlist@,;,% + % Then, we expand the body so that argument are replaced by their + % values. The trick for values not to be expanded themselves is that they + % are within tokens and that tokens expand only once in an \edef . + \edef\@tempc{\csname mac.\macroname .body\endcsname}% + % Now we restore the token stack pointer to free the token list registers + % which we have used, but we make sure that expanded body is saved after + % group. + \expandafter + \endgroup + \expandafter\def\expandafter\@tempa\expandafter{\@tempc}% + } + +\def\macargexpandinbody@{% + %% Define the named-macro outside of this group and then close this group. + \expandafter + \endgroup + \macargdeflist@ + % First the replace in body the macro arguments by their values, the result + % is in \@tempa . + \macvalstoargs@ + % Then we point at the \norecurse or \gobble (for recursive) macro value + % with \@tempb . + \expandafter\let\expandafter\@tempb\csname mac.\macroname .recurse\endcsname + % Depending on whether it is recursive or not, we need some tailing + % \egroup . + \ifx\@tempb\gobble + \let\@tempc\relax + \else + \let\@tempc\egroup + \fi + % And now we do the real job: + \edef\@tempd{\noexpand\@tempb{\macroname}\noexpand\scanmacro{\@tempa}\@tempc}% + \@tempd +} + +\def\putargsintokens@#1,{% + \if#1;\let\next\relax + \else + \let\next\putargsintokens@ + % First we allocate the new token list register, and give it a temporary + % alias \@tempb . + \toksdef\@tempb\the\paramno + % Then we place the argument value into that token list register. + \expandafter\let\expandafter\@tempa\csname macarg.#1\endcsname + \expandafter\@tempb\expandafter{\@tempa}% + \advance\paramno by 1\relax + \fi + \next +} + +% Save the token stack pointer into macro #1 +\def\texisavetoksstackpoint#1{\edef#1{\the\@cclvi}} +% Restore the token stack pointer from number in macro #1 +\def\texirestoretoksstackpoint#1{\expandafter\mathchardef\expandafter\@cclvi#1\relax} +% newtoks that can be used non \outer . +\def\texinonouternewtoks{\alloc@ 5\toks \toksdef \@cclvi} + +% Tailing missing arguments are set to empty +\def\setemptyargvalues@{% + \ifx\paramlist\nilm@ + \let\next\macargexpandinbody@ + \else + \expandafter\setemptyargvaluesparser@\paramlist\endargs@ + \let\next\setemptyargvalues@ + \fi + \next +} + +\def\setemptyargvaluesparser@#1,#2\endargs@{% + \expandafter\def\expandafter\@tempa\expandafter{% + \expandafter\def\csname macarg.#1\endcsname{}}% + \push@\@tempa\macargdeflist@ + \def\paramlist{#2}% +} + +% #1 is the element target macro +% #2 is the list macro +% #3,#4\endargs@ is the list value +\def\pop@#1#2#3,#4\endargs@{% + \def#1{#3}% + \def#2{#4}% +} +\long\def\longpop@#1#2#3,#4\endargs@{% + \long\def#1{#3}% + \long\def#2{#4}% +} -% This defines the macro itself. There are six cases: recursive and -% nonrecursive macros of zero, one, and many arguments. +% This defines a Texinfo @macro. There are eight cases: recursive and +% nonrecursive macros of zero, one, up to nine, and many arguments. % Much magic with \expandafter here. % \xdef is used so that macro definitions will survive the file % they're defined in; @include reads the file inside a group. +% \def\defmacro{% \let\hash=##% convert placeholders to macro parameter chars \ifrecursive @@ -6765,17 +7606,25 @@ end \expandafter\noexpand\csname\the\macname xxx\endcsname}% \expandafter\xdef\csname\the\macname xxx\endcsname##1{% \egroup\noexpand\scanmacro{\temp}}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \else + \ifnum\paramno<10\relax % at most 9 + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{\egroup\noexpand\scanmacro{\temp}}% + \else % 10 or more + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\gobble + \fi \fi \else \ifcase\paramno @@ -6792,29 +7641,40 @@ end \egroup \noexpand\norecurse{\the\macname}% \noexpand\scanmacro{\temp}\egroup}% - \else % many - \expandafter\xdef\csname\the\macname\endcsname{% - \bgroup\noexpand\macroargctxt - \expandafter\noexpand\csname\the\macname xx\endcsname}% - \expandafter\xdef\csname\the\macname xx\endcsname##1{% - \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% - \expandafter\expandafter - \expandafter\xdef - \expandafter\expandafter - \csname\the\macname xxx\endcsname - \paramlist{% - \egroup - \noexpand\norecurse{\the\macname}% - \noexpand\scanmacro{\temp}\egroup}% + \else % at most 9 + \ifnum\paramno<10\relax + \expandafter\xdef\csname\the\macname\endcsname{% + \bgroup\noexpand\macroargctxt + \expandafter\noexpand\csname\the\macname xx\endcsname}% + \expandafter\xdef\csname\the\macname xx\endcsname##1{% + \expandafter\noexpand\csname\the\macname xxx\endcsname ##1,}% + \expandafter\expandafter + \expandafter\xdef + \expandafter\expandafter + \csname\the\macname xxx\endcsname + \paramlist{% + \egroup + \noexpand\norecurse{\the\macname}% + \noexpand\scanmacro{\temp}\egroup}% + \else % 10 or more: + \expandafter\xdef\csname\the\macname\endcsname{% + \noexpand\getargvals@{\the\macname}{\argl}% + }% + \global\expandafter\let\csname mac.\the\macname .body\endcsname\temp + \global\expandafter\let\csname mac.\the\macname .recurse\endcsname\norecurse + \fi \fi \fi} +\catcode `\@\texiatcatcode\relax + \def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}} % \braceorline decides whether the next nonwhitespace character is a % {. If so it reads up to the closing }, if not, it reads the whole % line. Whatever was read is then fed to the next control sequence -% as an argument (by \parsebrace or \parsearg) +% as an argument (by \parsebrace or \parsearg). +% \def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx} \def\braceorlinexxx{% \ifx\nchar\bgroup\else @@ -6824,7 +7684,8 @@ end % @alias. % We need some trickery to remove the optional spaces around the equal -% sign. Just make them active and then expand them all to nothing. +% sign. Make them active and then expand them all to nothing. +% \def\alias{\parseargusing\obeyspaces\aliasxxx} \def\aliasxxx #1{\aliasyyy#1\relax} \def\aliasyyy #1=#2\relax{% @@ -6845,7 +7706,8 @@ end % @inforef is relatively simple. \def\inforef #1{\inforefzzz #1,,,,**} -\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, +\def\inforefzzz #1,#2,#3,#4**{% + \putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}}, node \samp{\ignorespaces#1{}}} % @node's only job in TeX is to define \lastnode, which is used in @@ -6906,11 +7768,32 @@ end \toks0 = \expandafter{\lastsection}% \immediate \writexrdef{title}{\the\toks0 }% \immediate \writexrdef{snt}{\csname #2\endcsname}% \Ynumbered etc. - \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, during \shipout + \safewhatsit{\writexrdef{pg}{\folio}}% will be written later, at \shipout }% \fi } +% @xrefautosectiontitle on|off says whether @section(ing) names are used +% automatically in xrefs, if the third arg is not explicitly specified. +% This was provided as a "secret" @set xref-automatic-section-title +% variable, now it's official. +% +\parseargdef\xrefautomaticsectiontitle{% + \def\temp{#1}% + \ifx\temp\onword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \empty + \else\ifx\temp\offword + \expandafter\let\csname SETxref-automatic-section-title\endcsname + = \relax + \else + \errhelp = \EMsimple + \errmessage{Unknown @xrefautomaticsectiontitle value `\temp', + must be on|off}% + \fi\fi +} + + % @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is % the node name, #2 the name of the Info cross-reference, #3 the printed % node name, #4 the name of the Info file, #5 the name of the printed @@ -6919,26 +7802,36 @@ end \def\pxref#1{\putwordsee{} \xrefX[#1,,,,,,,]} \def\xref#1{\putwordSee{} \xrefX[#1,,,,,,,]} \def\ref#1{\xrefX[#1,,,,,,,]} +% +\newbox\topbox +\newbox\printedrefnamebox +\newbox\printedmanualbox +% \def\xrefX[#1,#2,#3,#4,#5,#6]{\begingroup \unsepspaces - \def\printedmanual{\ignorespaces #5}% + % \def\printedrefname{\ignorespaces #3}% - \setbox1=\hbox{\printedmanual\unskip}% - \setbox0=\hbox{\printedrefname\unskip}% - \ifdim \wd0 = 0pt + \setbox\printedrefnamebox = \hbox{\printedrefname\unskip}% + % + \def\printedmanual{\ignorespaces #5}% + \setbox\printedmanualbox = \hbox{\printedmanual\unskip}% + % + % If the printed reference name (arg #3) was not explicitly given in + % the @xref, figure out what we want to use. + \ifdim \wd\printedrefnamebox = 0pt % No printed node name was explicitly given. - \expandafter\ifx\csname SETxref-automatic-section-title\endcsname\relax - % Use the node name inside the square brackets. + \expandafter\ifx\csname SETxref-automatic-section-title\endcsname \relax + % Not auto section-title: use node name inside the square brackets. \def\printedrefname{\ignorespaces #1}% \else - % Use the actual chapter/section title appear inside - % the square brackets. Use the real section title if we have it. - \ifdim \wd1 > 0pt - % It is in another manual, so we don't have it. + % Auto section-title: use chapter/section title inside + % the square brackets if we have it. + \ifdim \wd\printedmanualbox > 0pt + % It is in another manual, so we don't have it; use node name. \def\printedrefname{\ignorespaces #1}% \else \ifhavexrefs - % We know the real title if we have the xref values. + % We (should) know the real title if we have the xref values. \def\printedrefname{\refx{#1-title}{}}% \else % Otherwise just copy the Info node name. @@ -6950,20 +7843,21 @@ end % % Make link in pdf output. \ifpdf - \leavevmode - \getfilename{#4}% {\indexnofonts \turnoffactive - % See comments at \activebackslashdouble. - {\activebackslashdouble \xdef\pdfxrefdest{#1}% - \backslashparens\pdfxrefdest}% + % This expands tokens, so do it after making catcode changes, so _ + % etc. don't get their TeX definitions. + \getfilename{#4}% % + \edef\pdfxrefdest{#1}% + \txiescapepdf\pdfxrefdest + % + \leavevmode + \startlink attr{/Border [0 0 0]}% \ifnum\filenamelength>0 - \startlink attr{/Border [0 0 0]}% - goto file{\the\filename.pdf} name{\pdfxrefdest}% + goto file{\the\filename.pdf} name{\pdfxrefdest}% \else - \startlink attr{/Border [0 0 0]}% - goto name{\pdfmkpgn{\pdfxrefdest}}% + goto name{\pdfmkpgn{\pdfxrefdest}}% \fi }% \setcolor{\linkcolor}% @@ -6983,7 +7877,7 @@ end \iffloat\Xthisreftitle % If the user specified the print name (third arg) to the ref, % print it instead of our usual "Figure 1.2". - \ifdim\wd0 = 0pt + \ifdim\wd\printedrefnamebox = 0pt \refx{#1-snt}{}% \else \printedrefname @@ -6991,21 +7885,46 @@ end % % if the user also gave the printed manual name (fifth arg), append % "in MANUALNAME". - \ifdim \wd1 > 0pt + \ifdim \wd\printedmanualbox > 0pt \space \putwordin{} \cite{\printedmanual}% \fi \else % node/anchor (non-float) references. % - % If we use \unhbox0 and \unhbox1 to print the node names, TeX does not - % insert empty discretionaries after hyphens, which means that it will - % not find a line break at a hyphen in a node names. Since some manuals - % are best written with fairly long node names, containing hyphens, this - % is a loss. Therefore, we give the text of the node name again, so it - % is as if TeX is seeing it for the first time. - \ifdim \wd1 > 0pt - \putwordSection{} ``\printedrefname'' \putwordin{} \cite{\printedmanual}% + % If we use \unhbox to print the node names, TeX does not insert + % empty discretionaries after hyphens, which means that it will not + % find a line break at a hyphen in a node names. Since some manuals + % are best written with fairly long node names, containing hyphens, + % this is a loss. Therefore, we give the text of the node name + % again, so it is as if TeX is seeing it for the first time. + % + % Cross-manual reference. Only include the "Section ``foo'' in" if + % the foo is neither missing or Top. Thus, @xref{,,,foo,The Foo Manual} + % outputs simply "see The Foo Manual". + \ifdim \wd\printedmanualbox > 0pt + % What is the 7sp about? The idea is that we also want to omit + % the Section part if we would be printing "Top", since they are + % clearly trying to refer to the whole manual. But, this being + % TeX, we can't easily compare strings while ignoring the possible + % spaces before and after in the input. By adding the arbitrary + % 7sp, we make it much less likely that a real node name would + % happen to have the same width as "Top" (e.g., in a monospaced font). + % I hope it will never happen in practice. + % + % For the same basic reason, we retypeset the "Top" at every + % reference, since the current font is indeterminate. + % + \setbox\topbox = \hbox{Top\kern7sp}% + \setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}% + \ifdim \wd2 > 7sp + \ifdim \wd2 = \wd\topbox \else + \putwordSection{} ``\printedrefname'' \putwordin{}\space + \fi + \fi + \cite{\printedmanual}% \else + % Reference in this manual. + % % _ (for example) has to be the character _ for the purposes of the % control sequence corresponding to the node, but it has to expand % into the usual \leavevmode...\vrule stuff for purposes of @@ -7017,7 +7936,7 @@ end \setbox2 = \hbox{\ignorespaces \refx{#1-snt}{}}% \ifdim \wd2 > 0pt \refx{#1-snt}\space\fi }% - % output the `[mynode]' via a macro so it can be overridden. + % output the `[mynode]' via the macro below so it can be overridden. \xrefprintnodename\printedrefname % % But we always want a comma and a space: @@ -7080,7 +7999,8 @@ end \angleleft un\-de\-fined\angleright \iflinks \ifhavexrefs - \message{\linenumber Undefined cross reference `#1'.}% + {\toks0 = {#1}% avoid expansion of possibly-complex value + \message{\linenumber Undefined cross reference `\the\toks0'.}}% \else \ifwarnedxrefs\else \global\warnedxrefstrue @@ -7244,7 +8164,7 @@ end % space to prevent strange expansion errors.) \def\supereject{\par\penalty -20000\footnoteno =0 } -% @footnotestyle is meaningful for info output only. +% @footnotestyle is meaningful for Info output only. \let\footnotestyle=\comment {\catcode `\@=11 @@ -7307,6 +8227,8 @@ end % expands into a box, it must come within the paragraph, lest it % provide a place where TeX can split the footnote. \footstrut + % + % Invoke rest of plain TeX footnote routine. \futurelet\next\fo@t } }%end \catcode `\@=11 @@ -7314,7 +8236,7 @@ end % In case a @footnote appears in a vbox, save the footnote text and create % the real \insert just after the vbox finished. Otherwise, the insertion % would be lost. -% Similarily, if a @footnote appears inside an alignment, save the footnote +% Similarly, if a @footnote appears inside an alignment, save the footnote % text to a box and make the \insert when a row of the table is finished. % And the same can be done for other insert classes. --kasal, 16nov03. @@ -7394,7 +8316,7 @@ end it from ftp://tug.org/tex/epsf.tex.} % \def\image#1{% - \ifx\epsfbox\undefined + \ifx\epsfbox\thisiundefined \ifwarnednoepsf \else \errhelp = \noepsfhelp \errmessage{epsf.tex not found, images will be ignored}% @@ -7410,7 +8332,7 @@ end % #2 is (optional) width, #3 is (optional) height. % #4 is (ignored optional) html alt text. % #5 is (ignored optional) extension. -% #6 is just the usual extra ignored arg for parsing this stuff. +% #6 is just the usual extra ignored arg for parsing stuff. \newif\ifimagevmode \def\imagexxx#1,#2,#3,#4,#5,#6\finish{\begingroup \catcode`\^^M = 5 % in case we're inside an example @@ -7418,15 +8340,19 @@ end % If the image is by itself, center it. \ifvmode \imagevmodetrue - \nobreak\bigskip + \nobreak\medskip % Usually we'll have text after the image which will insert % \parskip glue, so insert it here too to equalize the space % above and below. \nobreak\vskip\parskip \nobreak - \line\bgroup \fi % + % Leave vertical mode so that indentation from an enclosing + % environment such as @quotation is respected. On the other hand, if + % it's at the top level, we don't want the normal paragraph indentation. + \noindent + % % Output the image. \ifpdf \dopdfimage{#1}{#2}{#3}% @@ -7437,7 +8363,7 @@ end \epsfbox{#1.eps}% \fi % - \ifimagevmode \egroup \bigbreak \fi % space after the image + \ifimagevmode \medskip \fi % space after the standalone image \endgroup} @@ -7709,10 +8635,9 @@ end \message{localization,} -% @documentlanguage is usually given very early, just after -% @setfilename. If done too late, it may not override everything -% properly. Single argument is the language (de) or locale (de_DE) -% abbreviation. It would be nice if we could set up a hyphenation file. +% For single-language documents, @documentlanguage is usually given very +% early, just after @documentencoding. Single argument is the language +% (de) or locale (de_DE) abbreviation. % { \catcode`\_ = \active @@ -7725,31 +8650,60 @@ end \ifeof 1 \documentlanguagetrywithoutunderscore{#1_\finish}% \else + \globaldefs = 1 % everything in the txi-LL files needs to persist \input txi-#1.tex \fi \closein 1 - \endgroup + \endgroup % end raw TeX \endgroup} -} % % If they passed de_DE, and txi-de_DE.tex doesn't exist, % try txi-de.tex. -% -\def\documentlanguagetrywithoutunderscore#1_#2\finish{% +% +\gdef\documentlanguagetrywithoutunderscore#1_#2\finish{% \openin 1 txi-#1.tex \ifeof 1 \errhelp = \nolanghelp \errmessage{Cannot read language file txi-#1.tex}% \else + \globaldefs = 1 % everything in the txi-LL files needs to persist \input txi-#1.tex \fi \closein 1 } +}% end of special _ catcode % \newhelp\nolanghelp{The given language definition file cannot be found or -is empty. Maybe you need to install it? In the current directory -should work if nowhere else does.} +is empty. Maybe you need to install it? Putting it in the current +directory should work if nowhere else does.} + +% This macro is called from txi-??.tex files; the first argument is the +% \language name to set (without the "\lang@" prefix), the second and +% third args are \{left,right}hyphenmin. +% +% The language names to pass are determined when the format is built. +% See the etex.log file created at that time, e.g., +% /usr/local/texlive/2008/texmf-var/web2c/pdftex/etex.log. +% +% With TeX Live 2008, etex now includes hyphenation patterns for all +% available languages. This means we can support hyphenation in +% Texinfo, at least to some extent. (This still doesn't solve the +% accented characters problem.) +% +\catcode`@=11 +\def\txisetlanguage#1#2#3{% + % do not set the language if the name is undefined in the current TeX. + \expandafter\ifx\csname lang@#1\endcsname \relax + \message{no patterns for #1}% + \else + \global\language = \csname lang@#1\endcsname + \fi + % but there is no harm in adjusting the hyphenmin values regardless. + \global\lefthyphenmin = #2\relax + \global\righthyphenmin = #3\relax +} +% Helpers for encodings. % Set the catcode of characters 128 through 255 to the specified number. % \def\setnonasciicharscatcode#1{% @@ -7790,7 +8744,7 @@ should work if nowhere else does.} \setnonasciicharscatcode\active \lattwochardefs % - \else \ifx \declaredencoding \latone + \else \ifx \declaredencoding \latone \setnonasciicharscatcode\active \latonechardefs % @@ -7802,7 +8756,7 @@ should work if nowhere else does.} \setnonasciicharscatcode\active \utfeightchardefs % - \else + \else \message{Unknown document encoding #1, ignoring.}% % \fi % utfeight @@ -7814,7 +8768,7 @@ should work if nowhere else does.} % A message to be logged when using a character that isn't available % the default font encoding (OT1). -% +% \def\missingcharmsg#1{\message{Character missing in OT1 encoding: #1.}} % Take account of \c (plain) vs. \, (Texinfo) difference. @@ -7827,21 +8781,21 @@ should work if nowhere else does.} % % Latin1 (ISO-8859-1) character definitions. \def\latonechardefs{% - \gdef^^a0{~} + \gdef^^a0{\tie} \gdef^^a1{\exclamdown} - \gdef^^a2{\missingcharmsg{CENT SIGN}} + \gdef^^a2{\missingcharmsg{CENT SIGN}} \gdef^^a3{{\pounds}} \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} \gdef^^a5{\missingcharmsg{YEN SIGN}} - \gdef^^a6{\missingcharmsg{BROKEN BAR}} + \gdef^^a6{\missingcharmsg{BROKEN BAR}} \gdef^^a7{\S} - \gdef^^a8{\"{}} - \gdef^^a9{\copyright} + \gdef^^a8{\"{}} + \gdef^^a9{\copyright} \gdef^^aa{\ordf} - \gdef^^ab{\missingcharmsg{LEFT-POINTING DOUBLE ANGLE QUOTATION MARK}} + \gdef^^ab{\guillemetleft} \gdef^^ac{$\lnot$} - \gdef^^ad{\-} - \gdef^^ae{\registeredsymbol} + \gdef^^ad{\-} + \gdef^^ae{\registeredsymbol} \gdef^^af{\={}} % \gdef^^b0{\textdegree} @@ -7857,7 +8811,7 @@ should work if nowhere else does.} \gdef^^b9{$^1$} \gdef^^ba{\ordm} % - \gdef^^bb{\missingcharmsg{RIGHT-POINTING DOUBLE ANGLE QUOTATION MARK}} + \gdef^^bb{\guillemetright} \gdef^^bc{$1\over4$} \gdef^^bd{$1\over2$} \gdef^^be{$3\over4$} @@ -7868,7 +8822,7 @@ should work if nowhere else does.} \gdef^^c2{\^A} \gdef^^c3{\~A} \gdef^^c4{\"A} - \gdef^^c5{\ringaccent A} + \gdef^^c5{\ringaccent A} \gdef^^c6{\AE} \gdef^^c7{\cedilla C} \gdef^^c8{\`E} @@ -7880,7 +8834,7 @@ should work if nowhere else does.} \gdef^^ce{\^I} \gdef^^cf{\"I} % - \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER ETH}} + \gdef^^d0{\DH} \gdef^^d1{\~N} \gdef^^d2{\`O} \gdef^^d3{\'O} @@ -7894,7 +8848,7 @@ should work if nowhere else does.} \gdef^^db{\^U} \gdef^^dc{\"U} \gdef^^dd{\'Y} - \gdef^^de{\missingcharmsg{LATIN CAPITAL LETTER THORN}} + \gdef^^de{\TH} \gdef^^df{\ss} % \gdef^^e0{\`a} @@ -7914,7 +8868,7 @@ should work if nowhere else does.} \gdef^^ee{\^{\dotless i}} \gdef^^ef{\"{\dotless i}} % - \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER ETH}} + \gdef^^f0{\dh} \gdef^^f1{\~n} \gdef^^f2{\`o} \gdef^^f3{\'o} @@ -7928,7 +8882,7 @@ should work if nowhere else does.} \gdef^^fb{\^u} \gdef^^fc{\"u} \gdef^^fd{\'y} - \gdef^^fe{\missingcharmsg{LATIN SMALL LETTER THORN}} + \gdef^^fe{\th} \gdef^^ff{\"y} } @@ -7949,8 +8903,8 @@ should work if nowhere else does.} % Latin2 (ISO-8859-2) character definitions. \def\lattwochardefs{% - \gdef^^a0{~} - \gdef^^a1{\missingcharmsg{LATIN CAPITAL LETTER A WITH OGONEK}} + \gdef^^a0{\tie} + \gdef^^a1{\ogonek{A}} \gdef^^a2{\u{}} \gdef^^a3{\L} \gdef^^a4{\missingcharmsg{CURRENCY SIGN}} @@ -7967,8 +8921,8 @@ should work if nowhere else does.} \gdef^^af{\dotaccent Z} % \gdef^^b0{\textdegree} - \gdef^^b1{\missingcharmsg{LATIN SMALL LETTER A WITH OGONEK}} - \gdef^^b2{\missingcharmsg{OGONEK}} + \gdef^^b1{\ogonek{a}} + \gdef^^b2{\ogonek{ }} \gdef^^b3{\l} \gdef^^b4{\'{}} \gdef^^b5{\v l} @@ -7993,14 +8947,14 @@ should work if nowhere else does.} \gdef^^c7{\cedilla C} \gdef^^c8{\v C} \gdef^^c9{\'E} - \gdef^^ca{\missingcharmsg{LATIN CAPITAL LETTER E WITH OGONEK}} + \gdef^^ca{\ogonek{E}} \gdef^^cb{\"E} \gdef^^cc{\v E} \gdef^^cd{\'I} \gdef^^ce{\^I} \gdef^^cf{\v D} % - \gdef^^d0{\missingcharmsg{LATIN CAPITAL LETTER D WITH STROKE}} + \gdef^^d0{\DH} \gdef^^d1{\'N} \gdef^^d2{\v N} \gdef^^d3{\'O} @@ -8009,7 +8963,7 @@ should work if nowhere else does.} \gdef^^d6{\"O} \gdef^^d7{$\times$} \gdef^^d8{\v R} - \gdef^^d9{\ringaccent U} + \gdef^^d9{\ringaccent U} \gdef^^da{\'U} \gdef^^db{\H U} \gdef^^dc{\"U} @@ -8027,14 +8981,14 @@ should work if nowhere else does.} \gdef^^e7{\cedilla c} \gdef^^e8{\v c} \gdef^^e9{\'e} - \gdef^^ea{\missingcharmsg{LATIN SMALL LETTER E WITH OGONEK}} + \gdef^^ea{\ogonek{e}} \gdef^^eb{\"e} \gdef^^ec{\v e} - \gdef^^ed{\'\i} - \gdef^^ee{\^\i} + \gdef^^ed{\'{\dotless{i}}} + \gdef^^ee{\^{\dotless{i}}} \gdef^^ef{\v d} % - \gdef^^f0{\missingcharmsg{LATIN SMALL LETTER D WITH STROKE}} + \gdef^^f0{\dh} \gdef^^f1{\'n} \gdef^^f2{\v n} \gdef^^f3{\'o} @@ -8053,11 +9007,11 @@ should work if nowhere else does.} } % UTF-8 character definitions. -% +% % This code to support UTF-8 is based on LaTeX's utf8.def, with some % changes for Texinfo conventions. It is included here under the GPL by % permission from Frank Mittelbach and the LaTeX team. -% +% \newcount\countUTFx \newcount\countUTFy \newcount\countUTFz @@ -8122,7 +9076,7 @@ should work if nowhere else does.} \gdef\DeclareUnicodeCharacter#1#2{% \countUTFz = "#1\relax - \wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% + %\wlog{\space\space defining Unicode char U+#1 (decimal \the\countUTFz)}% \begingroup \parseXMLCharref \def\UTFviiiTwoOctets##1##2{% @@ -8207,6 +9161,7 @@ should work if nowhere else does.} \DeclareUnicodeCharacter{00CE}{\^I} \DeclareUnicodeCharacter{00CF}{\"I} + \DeclareUnicodeCharacter{00D0}{\DH} \DeclareUnicodeCharacter{00D1}{\~N} \DeclareUnicodeCharacter{00D2}{\`O} \DeclareUnicodeCharacter{00D3}{\'O} @@ -8219,6 +9174,7 @@ should work if nowhere else does.} \DeclareUnicodeCharacter{00DB}{\^U} \DeclareUnicodeCharacter{00DC}{\"U} \DeclareUnicodeCharacter{00DD}{\'Y} + \DeclareUnicodeCharacter{00DE}{\TH} \DeclareUnicodeCharacter{00DF}{\ss} \DeclareUnicodeCharacter{00E0}{\`a} @@ -8238,6 +9194,7 @@ should work if nowhere else does.} \DeclareUnicodeCharacter{00EE}{\^{\dotless{i}}} \DeclareUnicodeCharacter{00EF}{\"{\dotless{i}}} + \DeclareUnicodeCharacter{00F0}{\dh} \DeclareUnicodeCharacter{00F1}{\~n} \DeclareUnicodeCharacter{00F2}{\`o} \DeclareUnicodeCharacter{00F3}{\'o} @@ -8250,16 +9207,21 @@ should work if nowhere else does.} \DeclareUnicodeCharacter{00FB}{\^u} \DeclareUnicodeCharacter{00FC}{\"u} \DeclareUnicodeCharacter{00FD}{\'y} + \DeclareUnicodeCharacter{00FE}{\th} \DeclareUnicodeCharacter{00FF}{\"y} \DeclareUnicodeCharacter{0100}{\=A} \DeclareUnicodeCharacter{0101}{\=a} \DeclareUnicodeCharacter{0102}{\u{A}} \DeclareUnicodeCharacter{0103}{\u{a}} + \DeclareUnicodeCharacter{0104}{\ogonek{A}} + \DeclareUnicodeCharacter{0105}{\ogonek{a}} \DeclareUnicodeCharacter{0106}{\'C} \DeclareUnicodeCharacter{0107}{\'c} \DeclareUnicodeCharacter{0108}{\^C} \DeclareUnicodeCharacter{0109}{\^c} + \DeclareUnicodeCharacter{0118}{\ogonek{E}} + \DeclareUnicodeCharacter{0119}{\ogonek{e}} \DeclareUnicodeCharacter{010A}{\dotaccent{C}} \DeclareUnicodeCharacter{010B}{\dotaccent{c}} \DeclareUnicodeCharacter{010C}{\v{C}} @@ -8407,6 +9369,8 @@ should work if nowhere else does.} \DeclareUnicodeCharacter{0233}{\=y} \DeclareUnicodeCharacter{0237}{\dotless{j}} + \DeclareUnicodeCharacter{02DB}{\ogonek{ }} + \DeclareUnicodeCharacter{1E02}{\dotaccent{B}} \DeclareUnicodeCharacter{1E03}{\dotaccent{b}} \DeclareUnicodeCharacter{1E04}{\udotaccent{B}} @@ -8580,8 +9544,8 @@ should work if nowhere else does.} % Prevent underfull vbox error messages. \vbadness = 10000 -% Don't be so finicky about underfull hboxes, either. -\hbadness = 2000 +% Don't be very finicky about underfull hboxes, either. +\hbadness = 6666 % Following George Bush, get rid of widows and orphans. \widowpenalty=10000 @@ -8788,25 +9752,21 @@ should work if nowhere else does.} \message{and turning on texinfo input format.} +\def^^L{\par} % remove \outer, so ^L can appear in an @comment + +% DEL is a comment character, in case @c does not suffice. +\catcode`\^^? = 14 + % Define macros to output various characters with catcode for normal text. -\catcode`\"=\other -\catcode`\~=\other -\catcode`\^=\other -\catcode`\_=\other -\catcode`\|=\other -\catcode`\<=\other -\catcode`\>=\other -\catcode`\+=\other -\catcode`\$=\other -\def\normaldoublequote{"} -\def\normaltilde{~} -\def\normalcaret{^} -\def\normalunderscore{_} -\def\normalverticalbar{|} -\def\normalless{<} -\def\normalgreater{>} -\def\normalplus{+} -\def\normaldollar{$}%$ font-lock fix +\catcode`\"=\other \def\normaldoublequote{"} +\catcode`\$=\other \def\normaldollar{$}%$ font-lock fix +\catcode`\+=\other \def\normalplus{+} +\catcode`\<=\other \def\normalless{<} +\catcode`\>=\other \def\normalgreater{>} +\catcode`\^=\other \def\normalcaret{^} +\catcode`\_=\other \def\normalunderscore{_} +\catcode`\|=\other \def\normalverticalbar{|} +\catcode`\~=\other \def\normaltilde{~} % This macro is used to make a character print one way in \tt % (where it can probably be output as-is), and another way in other fonts, @@ -8884,31 +9844,43 @@ should work if nowhere else does.} % In texinfo, backslash is an active character; it prints the backslash % in fixed width font. -\catcode`\\=\active -@def@normalbackslash{{@tt@backslashcurfont}} +\catcode`\\=\active % @ for escape char from now on. + +% The story here is that in math mode, the \char of \backslashcurfont +% ends up printing the roman \ from the math symbol font (because \char +% in math mode uses the \mathcode, and plain.tex sets +% \mathcode`\\="026E). It seems better for @backslashchar{} to always +% print a typewriter backslash, hence we use an explicit \mathchar, +% which is the decimal equivalent of "715c (class 7, e.g., use \fam; +% ignored family value; char position "5C). We can't use " for the +% usual hex value because it has already been made active. +@def@normalbackslash{{@tt @ifmmode @mathchar29020 @else @backslashcurfont @fi}} +@let@backslashchar = @normalbackslash % @backslashchar{} is for user documents. + % On startup, @fixbackslash assigns: % @let \ = @normalbackslash - % \rawbackslash defines an active \ to do \backslashcurfont. % \otherbackslash defines an active \ to be a literal `\' character with -% catcode other. +% catcode other. We switch back and forth between these. @gdef@rawbackslash{@let\=@backslashcurfont} @gdef@otherbackslash{@let\=@realbackslash} % Same as @turnoffactive except outputs \ as {\tt\char`\\} instead of % the literal character `\'. -% +% @def@normalturnoffactive{% - @let\=@normalbackslash @let"=@normaldoublequote - @let~=@normaltilde + @let$=@normaldollar %$ font-lock fix + @let+=@normalplus + @let<=@normalless + @let>=@normalgreater + @let\=@normalbackslash @let^=@normalcaret @let_=@normalunderscore @let|=@normalverticalbar - @let<=@normalless - @let>=@normalgreater - @let+=@normalplus - @let$=@normaldollar %$ font-lock fix + @let~=@normaltilde + @markupsetuplqdefault + @markupsetuprqdefault @unsepspaces } @@ -8938,11 +9910,28 @@ should work if nowhere else does.} % Say @foo, not \foo, in error messages. @escapechar = `@@ -% These look ok in all fonts, so just make them not special. -@catcode`@& = @other -@catcode`@# = @other -@catcode`@% = @other +% These (along with & and #) are made active for url-breaking, so need +% active definitions as the normal characters. +@def@normaldot{.} +@def@normalquest{?} +@def@normalslash{/} +% These look ok in all fonts, so just make them not special. +% @hashchar{} gets its own user-level command, because of #line. +@catcode`@& = @other @def@normalamp{&} +@catcode`@# = @other @def@normalhash{#} +@catcode`@% = @other @def@normalpercent{%} + +@let @hashchar = @normalhash + +@c Finally, make ` and ' active, so that txicodequoteundirected and +@c txicodequotebacktick work right in, e.g., @w{@code{`foo'}}. If we +@c don't make ` and ' active, @code will not get them as active chars. +@c Do this last of all since we use ` in the previous @catcode assignments. +@catcode`@'=@active +@catcode`@`=@active +@markupsetuplqdefault +@markupsetuprqdefault @c Local variables: @c eval: (add-hook 'write-file-hooks 'time-stamp) -- cgit 1.4.1