From 41d11b15a10ab049598ac053f75e9b59deafc537 Mon Sep 17 00:00:00 2001
From: Joseph Myers <joseph@codesourcery.com>
Date: Wed, 20 Dec 2017 22:26:24 +0000
Subject: Update miscellaneous files from upstream sources.

This patch updates various miscellaneous files from their upstream
sources.

Tested for x86_64, including "make pdf".

	* manual/texinfo.tex: Update to version 2017-12-18.20 with
	trailing whitespace removed.
	* scripts/config.guess: Update to version 2017-12-17.
	* scripts/config.sub: Update to version 2017-11-23.
	* scripts/install-sh: Update to version 2017-09-23.17.
	* scripts/move-if-change: Update to version 2017-09-13 06:45.
---
 manual/texinfo.tex | 212 +++++++++++++++++++++++++++++------------------------
 1 file changed, 116 insertions(+), 96 deletions(-)

(limited to 'manual/texinfo.tex')

diff --git a/manual/texinfo.tex b/manual/texinfo.tex
index 6d45464eb2..db5dc226ee 100644
--- a/manual/texinfo.tex
+++ b/manual/texinfo.tex
@@ -3,11 +3,11 @@
 % Load plain if necessary, i.e., if running under initex.
 \expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
 %
-\def\texinfoversion{2016-09-18.18}
+\def\texinfoversion{2017-12-18.20}
 %
 % Copyright 1985, 1986, 1988, 1990, 1991, 1992, 1993, 1994, 1995,
 % 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006,
-% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
+% 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
 % Free Software Foundation, Inc.
 %
 % This texinfo.tex file is free software: you can redistribute it and/or
@@ -21,7 +21,7 @@
 % General Public License for more details.
 %
 % You should have received a copy of the GNU General Public License
-% along with this program.  If not, see <http://www.gnu.org/licenses/>.
+% along with this program.  If not, see <https://www.gnu.org/licenses/>.
 %
 % As a special exception, when this file is read by TeX when processing
 % a Texinfo source document, you may use the result without
@@ -30,9 +30,9 @@
 %
 % Please try the latest version of texinfo.tex before submitting bug
 % reports; you can get the latest version from:
-%   http://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
-%   http://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
-%   http://www.gnu.org/software/texinfo/ (the Texinfo home page)
+%   https://ftp.gnu.org/gnu/texinfo/ (the Texinfo release area), or
+%   https://ftpmirror.gnu.org/texinfo/ (same, via a mirror), or
+%   https://www.gnu.org/software/texinfo/ (the Texinfo home page)
 % The texinfo.tex in any given distribution could well be out
 % of date, so if that's what you're using, please check.
 %
@@ -56,7 +56,7 @@
 % extent.  You can get the existing language-specific files from the
 % full Texinfo distribution.
 %
-% The GNU Texinfo home page is http://www.gnu.org/software/texinfo.
+% The GNU Texinfo home page is https://www.gnu.org/software/texinfo.
 
 
 \message{Loading texinfo [version \texinfoversion]:}
@@ -165,6 +165,9 @@
 % Give the space character the catcode for a space.
 \def\spaceisspace{\catcode`\ =10\relax}
 
+% Likewise for ^^M, the end of line character.
+\def\endlineisspace{\catcode13=10\relax}
+
 \chardef\dashChar  = `\-
 \chardef\slashChar = `\/
 \chardef\underChar = `\_
@@ -950,21 +953,14 @@ where each line of input produces a line of output.}
 % @comment ...line which is ignored...
 % @c is the same as @comment
 % @ignore ... @end ignore  is another way to write a comment
-%
-\def\comment{\begingroup \catcode`\^^M=\active%
-\catcode`\@=\other \catcode`\{=\other \catcode`\}=\other\commentxxx}%
 
-{\catcode`\^^M=\active%
-\gdef\commentxxx#1^^M{\endgroup%
-\futurelet\nexttoken\commentxxxx}%
-\gdef\commentxxxx{\ifx\nexttoken\aftermacro\expandafter\comment\fi}%
-}
 
 \def\c{\begingroup \catcode`\^^M=\active%
 \catcode`\@=\other \catcode`\{=\other \catcode`\}=\other%
 \cxxx}
 {\catcode`\^^M=\active \gdef\cxxx#1^^M{\endgroup}}
-% See comment in \scanmacro about why the definitions of @c and @comment differ
+%
+\let\comment\c
 
 % @paragraphindent NCHARS
 % We'll use ems for NCHARS, close enough.
@@ -5497,17 +5493,15 @@ end
       \let\indexlbrace\{   % Likewise, set these sequences for braces
       \let\indexrbrace\}   % used in the sort key.
       \begindoublecolumns
-      \let\entrywidowpenalty=\indexwidowpenalty
+      \let\dotheinsertentrybox\dotheinsertentryboxwithpenalty
       %
       % Read input from the index file line by line.
       \loopdo
-        \ifeof1
-          \let\firsttoken\relax
-        \else
+        \ifeof1 \else
           \read 1 to \nextline
-          \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}%
-          \act
         \fi
+        %
+        \indexinputprocessing
         \thisline
         %
         \ifeof1\else
@@ -5519,12 +5513,20 @@ end
   \fi
   \closein 1
 \endgroup}
+\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx}
+\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next}
 
+\def\indexinputprocessing{%
+  \ifeof1
+    \let\firsttoken\relax
+  \else
+    \edef\act{\gdef\noexpand\firsttoken{\getfirsttoken\nextline}}%
+    \act
+  \fi
+}
 \def\getfirsttoken#1{\expandafter\getfirsttokenx#1\endfirsttoken}
 \long\def\getfirsttokenx#1#2\endfirsttoken{\noexpand#1}
 
-\def\loopdo#1\repeat{\def\body{#1}\loopdoxxx}
-\def\loopdoxxx{\let\next=\relax\body\let\next=\loopdoxxx\fi\next}
 
 % These macros are used by the sorted index file itself.
 % Change them to control the appearance of the index.
@@ -5601,7 +5603,7 @@ end
     % For pdfTeX and XeTeX.
     % The redefinition of \domark stops marks being added in \pdflink to
     % preserve coloured links across page boundaries.  Otherwise the marks
-    % would get in the way of \lastbox in \insertindexentrybox.
+    % would get in the way of \lastbox in \insertentrybox.
     \let\domark\relax
     %
     % Start a new paragraph if necessary, so our assignments below can't
@@ -5662,9 +5664,9 @@ end
     \fi
     \egroup % end \boxA
     \ifdim\wd\boxB = 0pt
-      \global\setbox\entryindexbox=\vbox{\unhbox\boxA}%
+      \global\setbox\entrybox=\vbox{\unhbox\boxA}%
     \else
-    \global\setbox\entryindexbox=\vbox\bgroup
+    \global\setbox\entrybox=\vbox\bgroup
       % We want the text of the entries to be aligned to the left, and the
       % page numbers to be aligned to the right.
       %
@@ -5694,10 +5696,13 @@ end
       \advance\dimen@ii by 1\dimen@i
       \ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
       \ifdim\dimen@ > 0.8\dimen@ii   % due to long index text
-        \dimen@ = 0.7\dimen@ % Try to split the text roughly evenly
+        % Try to split the text roughly evenly.  \dimen@ will be the length of
+        % the first line.
+        \dimen@ = 0.7\dimen@
         \dimen@ii = \hsize
         \ifnum\dimen@>\dimen@ii
-          % If the entry is too long, use the whole line
+          % If the entry is too long (for example, if it needs more than
+          % two lines), use all the space in the first line.
           \dimen@ = \dimen@ii
         \fi
         \advance\leftskip by 0pt plus 1fill % ragged right
@@ -5707,8 +5712,9 @@ end
         % instead of using \parshape with explicit line lengths, but TeX
         % doesn't seem to provide a way to do such a thing.
         %
-        \leftskip = 1em
-        \parindent = -1em
+        % Indent all lines but the first one.
+        \advance\leftskip by 1em
+        \advance\parindent by -1em
       \fi\fi
       \indent % start paragraph
       \unhbox\boxA
@@ -5726,19 +5732,20 @@ end
     \egroup % The \vbox
     \fi
   \endgroup
-  % delay text of entry until after penalty
-  \bgroup\aftergroup\insertindexentrybox
-  \entrywidowpenalty
+  \dotheinsertentrybox
 }}
 
 \newskip\thinshrinkable
 \skip\thinshrinkable=.15em minus .15em
 
-\newbox\entryindexbox
-\def\insertindexentrybox{%
-  \ourunvbox\entryindexbox
+\newbox\entrybox
+\def\insertentrybox{%
+  \ourunvbox\entrybox
 }
 
+% default definition
+\let\dotheinsertentrybox\insertentrybox
+
 % Use \lastbox to take apart vbox box by box, and add each sub-box
 % to the current vertical list.
 \def\ourunvbox#1{%
@@ -5761,21 +5768,18 @@ end
 \newbox\delayedbox
 \newbox\interbox
 
-% Default is no penalty
-\let\entrywidowpenalty\egroup
-
 % Used from \printindex.  \firsttoken should be the first token
 % after the \entry.  If it's not another \entry, we are at the last
 % line of a group of index entries, so insert a penalty to discourage
 % widowed index entries.
-\long\def\indexwidowpenalty{%
-  \def\isentry{\entry}%
+\def\dotheinsertentryboxwithpenalty{%
   \ifx\firsttoken\isentry
   \else
     \penalty 9000
   \fi
-  \egroup % now comes the box added with \aftergroup
+  \insertentrybox
 }
+\def\isentry{\entry}%
 
 % Like plain.tex's \dotfill, except uses up at least 1 em.
 % The filll stretch here overpowers both the fil and fill stretch to push
@@ -5892,8 +5896,8 @@ end
     \divide\doublecolumnhsize by 2
   \hsize = \doublecolumnhsize
   %
-  % Double the \vsize as well.  (We don't need a separate register here,
-  % since nobody clobbers \vsize.)
+  % Double the \vsize as well.
+  \advance\vsize by -\ht\partialpage
   \vsize = 2\vsize
   %
   % For the benefit of balancing columns
@@ -5911,12 +5915,12 @@ end
   % previous page.
   \dimen@ = \vsize
   \divide\dimen@ by 2
-  \advance\dimen@ by -\ht\partialpage
   %
   % box0 will be the left-hand column, box2 the right.
-  \setbox0=\vsplit255 to\dimen@ \setbox2=\vsplit255 to\dimen@
+  \setbox0=\vsplit\PAGE to\dimen@ \setbox2=\vsplit\PAGE to\dimen@
+  \global\advance\vsize by 2\ht\partialpage
   \onepageout\pagesofar
-  \unvbox255
+  \unvbox\PAGE
   \penalty\outputpenalty
 }
 %
@@ -5965,24 +5969,30 @@ end
     % Split the last of the double-column material.
     \savemarks
     \balancecolumns
-    %
+  }%
+  \eject % call the \output just set
+  \ifdim\pagetotal=0pt
     % Having called \balancecolumns once, we do not
     % want to call it again.  Therefore, reset \output to its normal
     % definition right away.
     \global\output = {\onepageout{\pagecontents\PAGE}}%
-  }%
-  \eject
-  \endgroup % started in \begindoublecolumns
-  \restoremarks
-  % Leave the double-column material on the current page, no automatic
-  % page break.
-  \box\balancedcolumns
-  %
-  % \pagegoal was set to the doubled \vsize above, since we restarted
-  % the current page.  We're now back to normal single-column
-  % typesetting, so reset \pagegoal to the normal \vsize (after the
-  % \endgroup where \vsize got restored).
-  \pagegoal = \vsize
+    %
+    \endgroup % started in \begindoublecolumns
+    \restoremarks
+    % Leave the double-column material on the current page, no automatic
+    % page break.
+    \box\balancedcolumns
+    %
+    % \pagegoal was set to the doubled \vsize above, since we restarted
+    % the current page.  We're now back to normal single-column
+    % typesetting, so reset \pagegoal to the normal \vsize.
+    \global\vsize = \txipageheight %
+    \pagegoal = \txipageheight %
+  \else
+    % We had some left-over material.  This might happen when \doublecolumnout
+    % is called in \balancecolumns.  Try again.
+    \expandafter\enddoublecolumns
+  \fi
 }
 \newbox\balancedcolumns
 \setbox\balancedcolumns=\vbox{shouldnt see this}%
@@ -5990,13 +6000,14 @@ end
 % Only called for the last of the double column material.  \doublecolumnout
 % does the others.
 \def\balancecolumns{%
-  \setbox0 = \vbox{\unvbox255}% like \box255 but more efficient, see p.120.
+  \setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
   \dimen@ = \ht0
   \advance\dimen@ by \topskip
   \advance\dimen@ by-\baselineskip
   \ifdim\dimen@<5\baselineskip
     % Don't split a short final column in two.
     \setbox2=\vbox{}%
+    \global\setbox\balancedcolumns=\vbox{\pagesofar}%
   \else
     \divide\dimen@ by 2 % target to split to
     \dimen@ii = \dimen@
@@ -6012,15 +6023,15 @@ end
       \repeat
     }%
     % Now the left column is in box 1, and the right column in box 3.
+    %
     % Check whether the left column has come out higher than the page itself.
     % (Note that we have doubled \vsize for the double columns, so
     % the actual height of the page is 0.5\vsize).
     \ifdim2\ht1>\vsize
-      % Just split the last of the double column material roughly in half.
-      \setbox2=\box0
-      \setbox0 = \vsplit2 to \dimen@ii
-      \setbox0=\vbox to \dimen@ii {\unvbox0\vfill}%
-      \setbox2=\vbox to \dimen@ii {\unvbox2\vfill}%
+      % It appears that we have been called upon to balance too much material.
+      % Output some of it with \doublecolumnout, leaving the rest on the page.
+      \setbox\PAGE=\box0
+      \doublecolumnout
     \else
       % Compare the heights of the two columns.
       \ifdim4\ht1>5\ht3
@@ -6033,10 +6044,10 @@ end
         \setbox2=\vbox to\ht1{\unvbox3\unskip}%
         \setbox0=\vbox to\ht1{\unvbox1\unskip}%
       \fi
+      \global\setbox\balancedcolumns=\vbox{\pagesofar}%
     \fi
   \fi
   %
-  \global\setbox\balancedcolumns=\vbox{\pagesofar}%
 }
 \catcode`\@ = \other
 
@@ -6943,7 +6954,15 @@ end
 % exist, with an empty box.  Let's hope all the numbers have the same width.
 % Also ignore the page number, which is conventionally not printed.
 \def\numeralbox{\setbox0=\hbox{8}\hbox to \wd0{\hfil}}
-\def\partentry#1#2#3#4{\dochapentry{\numeralbox\labelspace#1}{}}
+\def\partentry#1#2#3#4{%
+  % Add stretch and a bonus for breaking the page before the part heading.
+  % This reduces the chance of the page being broken immediately after the
+  % part heading, before a following chapter heading.
+  \vskip 0pt plus 5\baselineskip
+  \penalty-300
+  \vskip 0pt plus -5\baselineskip
+  \dochapentry{\numeralbox\labelspace#1}{}%
+}
 %
 % Parts, in the short toc.
 \def\shortpartentry#1#2#3#4{%
@@ -8031,9 +8050,6 @@ end
   }
 \fi
 
-\let\aftermacroxxx\relax
-\def\aftermacro{\aftermacroxxx}
-
 % alias because \c means cedilla in @tex or @math
 \let\texinfoc=\c
 
@@ -8055,18 +8071,13 @@ end
   \catcode`\\=\active
   %
   % Process the macro body under the current catcode regime.
-  \scantokens{#1@texinfoc}\aftermacro%
+  \scantokens{#1@texinfoc}%
   %
   \catcode`\@=\savedcatcodeone
   \catcode`\\=\savedcatcodetwo
   %
   % The \texinfoc is to remove the \newlinechar added by \scantokens, and
   % can be noticed by \parsearg.
-  %   The \aftermacro allows a \comment at the end of the macro definition
-  % to duplicate itself past the final \newlinechar added by \scantokens:
-  % this is used in the definition of \group to comment out a newline.  We
-  % don't do the same for \c to support Texinfo files with macros that ended
-  % with a @c, which should no longer be necessary.
   %   We avoid surrounding the call to \scantokens with \bgroup and \egroup
   % to allow macros to open or close groups themselves.
 }
@@ -8538,6 +8549,13 @@ end
   \ifcase\paramno
   % 0
     \expandafter\xdef\csname\the\macname\endcsname{%
+      \bgroup
+        \noexpand\spaceisspace
+        \noexpand\endlineisspace
+        \noexpand\expandafter % skip any whitespace after the macro name.
+        \expandafter\noexpand\csname\the\macname @@@\endcsname}%
+    \expandafter\xdef\csname\the\macname @@@\endcsname{%
+      \egroup
       \noexpand\scanmacro{\macrobody}}%
   \or % 1
     \expandafter\xdef\csname\the\macname\endcsname{%
@@ -9123,7 +9141,13 @@ end
     \xdef\safexrefname{#1}%
   }%
   %
-  \expandafter\gdef\csname XR\safexrefname\endcsname{#2}% remember this xref
+  \bgroup
+    \expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
+  \egroup
+  % We put the \gdef inside a group to avoid the definitions building up on
+  % TeX's save stack, which can cause it to run out of space for aux files with
+  % thousands of lines.  \gdef doesn't use the save stack, but \csname does
+  % when it defines an unknown control sequence as \relax.
   %
   % Was that xref control sequence that we just defined for a float?
   \expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -9429,7 +9453,7 @@ end
 \newif\ifwarnednoepsf
 \newhelp\noepsfhelp{epsf.tex must be installed for images to
   work.  It is also included in the Texinfo distribution, or you can get
-  it from ftp://tug.org/tex/epsf.tex.}
+  it from https://ctan.org/texarchive/macros/texinfo/texinfo/doc/epsf.tex.}
 %
 \def\image#1{%
   \ifx\epsfbox\thisisundefined
@@ -11004,7 +11028,6 @@ directory should work if nowhere else does.}
   \DeclareUnicodeCharacter{2113}{\ensuremath\ell}%
   \DeclareUnicodeCharacter{2118}{\ensuremath\wp}%
   \DeclareUnicodeCharacter{211C}{\ensuremath\Re}%
-  \DeclareUnicodeCharacter{2127}{\ensuremath\mho}%
   \DeclareUnicodeCharacter{2135}{\ensuremath\aleph}%
   \DeclareUnicodeCharacter{2190}{\ensuremath\leftarrow}%
   \DeclareUnicodeCharacter{2191}{\ensuremath\uparrow}%
@@ -11020,7 +11043,6 @@ directory should work if nowhere else does.}
   \DeclareUnicodeCharacter{21AA}{\ensuremath\hookrightarrow}%
   \DeclareUnicodeCharacter{21BC}{\ensuremath\leftharpoonup}%
   \DeclareUnicodeCharacter{21BD}{\ensuremath\leftharpoondown}%
-  \DeclareUnicodeCharacter{21BE}{\ensuremath\upharpoonright}%
   \DeclareUnicodeCharacter{21C0}{\ensuremath\rightharpoonup}%
   \DeclareUnicodeCharacter{21C1}{\ensuremath\rightharpoondown}%
   \DeclareUnicodeCharacter{21CC}{\ensuremath\rightleftharpoons}%
@@ -11029,8 +11051,6 @@ directory should work if nowhere else does.}
   \DeclareUnicodeCharacter{21D3}{\ensuremath\Downarrow}%
   \DeclareUnicodeCharacter{21D4}{\ensuremath\Leftrightarrow}%
   \DeclareUnicodeCharacter{21D5}{\ensuremath\Updownarrow}%
-  \DeclareUnicodeCharacter{21DD}{\ensuremath\leadsto}%
-  \DeclareUnicodeCharacter{2201}{\ensuremath\complement}%
   \DeclareUnicodeCharacter{2202}{\ensuremath\partial}%
   \DeclareUnicodeCharacter{2205}{\ensuremath\emptyset}%
   \DeclareUnicodeCharacter{2207}{\ensuremath\nabla}%
@@ -11064,8 +11084,6 @@ directory should work if nowhere else does.}
   \DeclareUnicodeCharacter{2283}{\ensuremath\supset}%
   \DeclareUnicodeCharacter{2286}{\ensuremath\subseteq}%
   \DeclareUnicodeCharacter{228E}{\ensuremath\uplus}%
-  \DeclareUnicodeCharacter{228F}{\ensuremath\sqsubset}%
-  \DeclareUnicodeCharacter{2290}{\ensuremath\sqsupset}%
   \DeclareUnicodeCharacter{2291}{\ensuremath\sqsubseteq}%
   \DeclareUnicodeCharacter{2292}{\ensuremath\sqsupseteq}%
   \DeclareUnicodeCharacter{2293}{\ensuremath\sqcap}%
@@ -11080,8 +11098,6 @@ directory should work if nowhere else does.}
   \DeclareUnicodeCharacter{22A4}{\ensuremath\ptextop}%
   \DeclareUnicodeCharacter{22A5}{\ensuremath\bot}%
   \DeclareUnicodeCharacter{22A8}{\ensuremath\models}%
-  \DeclareUnicodeCharacter{22B4}{\ensuremath\unlhd}%
-  \DeclareUnicodeCharacter{22B5}{\ensuremath\unrhd}%
   \DeclareUnicodeCharacter{22C0}{\ensuremath\bigwedge}%
   \DeclareUnicodeCharacter{22C1}{\ensuremath\bigvee}%
   \DeclareUnicodeCharacter{22C2}{\ensuremath\bigcap}%
@@ -11097,12 +11113,11 @@ directory should work if nowhere else does.}
   \DeclareUnicodeCharacter{2322}{\ensuremath\frown}%
   \DeclareUnicodeCharacter{2323}{\ensuremath\smile}%
   %
-  \DeclareUnicodeCharacter{25A1}{\ensuremath\Box}%
   \DeclareUnicodeCharacter{25B3}{\ensuremath\triangle}%
   \DeclareUnicodeCharacter{25B7}{\ensuremath\triangleright}%
   \DeclareUnicodeCharacter{25BD}{\ensuremath\bigtriangledown}%
   \DeclareUnicodeCharacter{25C1}{\ensuremath\triangleleft}%
-  \DeclareUnicodeCharacter{25C7}{\ensuremath\Diamond}%
+  \DeclareUnicodeCharacter{25C7}{\ensuremath\diamond}%
   \DeclareUnicodeCharacter{2660}{\ensuremath\spadesuit}%
   \DeclareUnicodeCharacter{2661}{\ensuremath\heartsuit}%
   \DeclareUnicodeCharacter{2662}{\ensuremath\diamondsuit}%
@@ -11124,7 +11139,6 @@ directory should work if nowhere else does.}
   \DeclareUnicodeCharacter{2A02}{\ensuremath\bigotimes}%
   \DeclareUnicodeCharacter{2A04}{\ensuremath\biguplus}%
   \DeclareUnicodeCharacter{2A06}{\ensuremath\bigsqcup}%
-  \DeclareUnicodeCharacter{2A1D}{\ensuremath\Join}%
   \DeclareUnicodeCharacter{2A3F}{\ensuremath\amalg}%
   \DeclareUnicodeCharacter{2AAF}{\ensuremath\preceq}%
   \DeclareUnicodeCharacter{2AB0}{\ensuremath\succeq}%
@@ -11279,6 +11293,7 @@ directory should work if nowhere else does.}
     \pdfvorigin = 1 true in
   \else
     \ifx\XeTeXrevision\thisisundefined
+      \special{papersize=#8,#7}%
     \else
       \pdfpageheight #7\relax
       \pdfpagewidth #8\relax
@@ -11316,7 +11331,6 @@ directory should work if nowhere else does.}
   %
   \lispnarrowing = 0.3in
   \tolerance = 700
-  \hfuzz = 1pt
   \contentsrightmargin = 0pt
   \defbodyindent = .5cm
 }}
@@ -11334,7 +11348,6 @@ directory should work if nowhere else does.}
   %
   \lispnarrowing = 0.25in
   \tolerance = 700
-  \hfuzz = 1pt
   \contentsrightmargin = 0pt
   \defbodyindent = .4cm
 }}
@@ -11360,7 +11373,6 @@ directory should work if nowhere else does.}
                     {297mm}{210mm}%
   %
   \tolerance = 700
-  \hfuzz = 1pt
   \contentsrightmargin = 0pt
   \defbodyindent = 5mm
 }}
@@ -11379,7 +11391,6 @@ directory should work if nowhere else does.}
   %
   \lispnarrowing = 0.2in
   \tolerance = 800
-  \hfuzz = 1.2pt
   \contentsrightmargin = 0pt
   \defbodyindent = 2mm
   \tableindent = 12mm
@@ -11421,9 +11432,11 @@ directory should work if nowhere else does.}
   %
   \dimen0 = #1\relax
   \advance\dimen0 by \voffset
+  \advance\dimen0 by 1in % reference point for DVI is 1 inch from top of page
   %
   \dimen2 = \hsize
   \advance\dimen2 by \normaloffset
+  \advance\dimen2 by 1in % reference point is 1 inch from left edge of page
   %
   \internalpagesizes{#1}{\hsize}%
                     {\voffset}{\normaloffset}%
@@ -11435,6 +11448,9 @@ directory should work if nowhere else does.}
 %
 \letterpaper
 
+% Default value of \hfuzz, for suppressing warnings about overfull hboxes.
+\hfuzz = 1pt
+
 
 \message{and turning on texinfo input format.}
 
@@ -11600,6 +11616,9 @@ directory should work if nowhere else does.}
   @def ^^M{@let^^M@secondlinenl}%
   % Definition for a newline in the main Texinfo file.
   @gdef @secondlinenl{@fixbackslash}%
+  % In case the first line has a whole-line command on it
+  @let@originalparsearg@parsearg
+  @def@parsearg{@fixbackslash@originalparsearg}
 }}
 
 {@catcode`@^=7 @catcode`@^^M=13%
@@ -11620,6 +11639,7 @@ directory should work if nowhere else does.}
   @catcode13=5 % regular end of line
   @enableemergencynewline
   @let@c=@texinfoc
+  @let@parsearg@originalparsearg
   % Also turn back on active characters that might appear in the input
   % file name, in case not using a pre-dumped format.
   @catcode`+=@active
-- 
cgit 1.4.1

