about summary refs log tree commit diff
path: root/sysdeps
Commit message (Collapse)AuthorAgeFilesLines
* Fix RISC-V vfork build with Linux 5.3 kernel headers.Joseph Myers2019-09-181-1/+4
| | | | | | | | | | | | | | | | | | | | | Building glibc for RISC-V with Linux 5.3 kernel headers fails because <linux/sched.h>, included in vfork.S for CLONE_* constants, contains a structure definition not safe for inclusion in assembly code. All other architectures already avoid use of that header in vfork.S, either defining the CLONE_* constants locally or embedding the required values directly in the relevant instruction, where they implement vfork using the clone syscall (see the implementations for aarch64, ia64, mips and nios2). This patch makes the RISC-V version define the constants locally like the other architectures. Tested build for all three RISC-V configurations in build-many-glibcs.py with Linux 5.3 headers. * sysdeps/unix/sysv/linux/riscv/vfork.S: Do not include <linux/sched.h>. (CLONE_VM): New macro. (CLONE_VFORK): Likewise.
* sparc64: Use linux generic time implementationAdhemerval Zanella2019-09-171-1/+0
| | | | | | | | | | There is no need to sparc64 provide an arch-specific implementation to route to POSIX one (which uses gettimeofday). Linux one already handles the case for architecture that does not have __NR_time. No semantic changes, checked against a build for sparc64-linux-gnu. * sysdeps/unix/sysv/linux/sparc/sparc64/time.c: Remove file.
* mips: Consolidate INTERNAL_VSYSCALL_CALLAdhemerval Zanella2019-09-174-36/+16
| | | | | | | | | | | | | | | | | This patch consolidates the mips, mips64, and mips64-n32 INTERNAL_VSYSCALL_CALL on a single implementation. No semantic changes. I checked against a build for mips-linux-gnu, mips64-linux-gnu, and mips64-n32-linux-gnu. * sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (INTERNAL_VSYSCALL_CALL): Remove. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (INTERNAL_VSYSCALL_CALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (INTERNAL_VSYSCALL_CALL): Likewise. * sysdeps/unix/sysv/linux/mips/sysdep.h (INTERNAL_VSYSCALL_CALL): New macro.
* powerpc: Simplify vsyscall internal macrosAdhemerval Zanella2019-09-175-54/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch simplifies the powerpc internal macros for vDSO calls by: - Removing INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK, used solely on get_timebase_freq. - Adjust INTERNAL_VSYSCALL_CALL_TYPE powerpc32 to follow powerpc64 argument ordering. - Use HAVE_*_VSYSCALL instead of explicit strings. - Make powerpc libc-vdso.h include generic implementation. No semantic change expected, checked on powerpc-linux-gnu-power4, powerpc64-linux-gnu, and powerpc64le-linux-gnu. * sysdeps/unix/sysv/linux/libc-vdso.h (VDSO_IFUNC_RET): Define if not defined. * sysdeps/unix/sysv/linux/powerpc/get_timebase_freq.c (__get_timebase_freq): Remove use of INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK. (get_timebase_freq_fallback): New symbol. * sysdeps/unix/sysv/linux/powerpc/gettimeofday.c (time): Use HAVE_GETTIMEOFDAY_VSYSCALL. * sysdeps/unix/sysv/linux/powerpc/time.c (gettimeofday): Use HAVE_TIME_VSYSCALL. * sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Include generic implementation. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h (INTERNAL_VSYSCALL_CALL_TYPE): Make calling convention similar to powerpc64. (INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Remove macro. * .../sysv/linux/powerpc/powerpc64/sysdep.h (INTERNAL_VSYSCALL_NO_SYSCALL_FALLBACK): Likewise. * sysdeps/unix/sysv/linux/powerpc/sysdep.h (HAVE_GETTIMEOFDAY_VSYSCALL): Define.
* Refactor vDSO initialization codeAdhemerval Zanella2019-09-1734-650/+177
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linux vDSO initialization code the internal function pointers require a lot of duplicated boilerplate over different architectures. This patch aims to simplify not only the code but the required definition to enable a vDSO symbol. The changes are: 1. Consolidate all init-first.c on only one implementation and enable the symbol based on HAVE_*_VSYSCALL existence. 2. Set the HAVE_*_VSYSCALL to the architecture expected names string. 3. Add a new internal implementation, get_vdso_mangle_symbol, which returns a mangled function pointer. Currently the clock_gettime, clock_getres, gettimeofday, getcpu, and time are handled in an arch-independent way, powerpc still uses some arch-specific vDSO symbol handled in a specific init-first implementation. Checked on aarch64-linux-gnu, arm-linux-gnueabihf, i386-linux-gnu, mips64-linux-gnu, powerpc64le-linux-gnu, s390x-linux-gnu, sparc64-linux-gnu, and x86_64-linux-gnu. * sysdeps/powerpc/powerpc32/backtrace.c (is_sigtramp_address, is_sigtramp_address_rt): Use HAVE_SIGTRAMP_{RT}32 instead of SHARED. * sysdeps/powerpc/powerpc64/backtrace.c (is_sigtramp_address): Likewise. * sysdeps/unix/sysv/linux/aarch64/init-first.c: Remove file. * sysdeps/unix/sysv/linux/aarch64/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/arm/init-first.c: Likewise. * sysdeps/unix/sysv/linux/arm/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/mips/init-first.c: Likewise. * sysdeps/unix/sysv/linux/mips/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/i386/init-first.c: Likewise. * sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise. * sysdeps/unix/sysv/linux/riscv/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/s390/init-first.c: Likewise. * sysdeps/unix/sysv/linux/s390/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise. * sysdeps/unix/sysv/linux/sparc/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/x86/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Define value based on kernel exported name. * sysdeps/unix/sysv/linux/arm/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETCPU_VSYSCALL, HAVE_TIME_VSYSCALL, HAVE_GET_TBFREQ, HAVE_SIGTRAMP_RT64, HAVE_SIGTRAMP_32, HAVE_SIGTRAMP_RT32i, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/riscv/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/dl-vdso.h (VDSO_NAME, VDSO_HASH): Define to invalid names if architecture does not define them. (get_vdso_mangle_symbol): New symbol. * sysdeps/unix/sysv/linux/init-first.c: New file. * sysdeps/unix/sysv/linux/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/init-first.c (gettimeofday, clock_gettime, clock_getres, getcpu, time): Remove declaration. (__libc_vdso_platform_setup_arch): Likewise and use get_vdso_mangle_symbol to setup vDSO symbols. (sigtramp_rt64, sigtramp32, sigtramp_rt32, get_tbfreq): Add attribute_hidden. * sysdeps/unix/sysv/linux/powerpc/libc-vdso.h: Likewise. * sysdeps/unix/sysv/linux/sysdep-vdso.h (VDSO_SYMBOL): Remove definition.
* Remove PREPARE_VERSION and PREPARE_VERSION_KNOWAdhemerval Zanella2019-09-1733-157/+163
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch removes the PREPARE_VERSION and PREPARE_VERSION_KNOW macro and uses a static inline function instead, get_vdso_symbol. Each architecture that supports vDSO must define the Linux version and its hash for symbol resolution (VDSO_NAME and VDSO_HASH macro respectively). It also organizes the HAVE_*_VSYSCALL for mips, powerpc, and s390 to define them on a common header. The idea is to require less code to configure and enable vDSO support for newer ports. No semantic changes are expected. Checked with a build against all affected architectures. * sysdeps/unix/make-syscalls.sh: Make vDSO call use get_vdso_symbol. * sysdeps/unix/sysv/linux/aarch64/gettimeofday.c (__gettimeofday): Use get_vdso_symbol instead of _dl_vdso_vsym. * sysdeps/unix/sysv/linux/powerpc/time.c (time): Likewise. * sysdeps/unix/sysv/linux/riscv/flush-icache.c (__lookup_riscv_flush_icache): Likewise. * sysdeps/unix/sysv/linux/x86/gettimeofday.c (__gettimeofday): Likewise. * sysdeps/unix/sysv/linux/x86/time.c (time): Likewise. * sysdeps/unix/sysv/linux/powerpc/gettimeofday.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/init-first.c: Likewise. * sysdeps/unix/sysv/linux/arm/init-first.c: Likewise. * sysdeps/unix/sysv/linux/i386/init-first.c: Likewise. * sysdeps/unix/sysv/linux/mips/init-first.c: Likewise. * sysdeps/unix/sysv/linux/powerpc/init-first.c: Likewise. * sysdeps/unix/sysv/linux/riscv/init-first.c: Likewise. * sysdeps/unix/sysv/linux/sparc/init-first.c: Likewise. * sysdeps/unix/sysv/linux/s390/init-first.c: Likewise. * sysdeps/unix/sysv/linux/x86_64/init-first.c: Likewise. * sysdeps/unix/sysv/linux/aarch64/sysdep.h (VDSO_NAME, VDSO_HASH): Define. * sysdeps/unix/sysv/linux/arm/sysdep.h (VDSO_NAME, VDSO_HASH): Likewise. * sysdeps/unix/sysv/linux/i386/sysdep.h (VDSO_NAME, VDSO_HASH): Likewise. * sysdeps/unix/sysv/linux/riscv/sysdep.h (VDSO_NAME, VDSO_HASH): Likewise. * sysdeps/unix/sysv/linux/sparc/sysdep.h (VDSO_NAME, VDSO_HASH): Likewise. * sysdeps/unix/sysv/linux/x86_64/sysdep.h (VDSO_NAME, VDSO_HASH): Likewise. * sysdeps/unix/sysv/linux/mips/mips32/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Remove definition. * sysdeps/unix/sysv/linux/mips/mips64/n32/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/mips64/n64/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/sysdep.h (HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/sysdep.h (HAVE_CLOCK_GETRES_VSYSCALL, HAVE_CLOCK_GETTIME_VSYSCALL, HAVE_GETTIMEOFDAY_VSYSCALL, HAVE_GETCPU_VSYSCALL): Likewise. * sysdeps/unix/sysv/linux/mips/sysdep.h: New file. * sysdeps/unix/sysv/linux/powerpc/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/s390/sysdep.h: Likewise. * sysdeps/unix/sysv/linux/dl-vdso.h (PREPARE_VERSION, PREPARE_VERSION_KNOWN, VDSO_NAME_LINUX_2_6, VDSO_HASH_LINUX_2_6, VDSO_NAME_LINUX_2_6_15, VDSO_HASH_LINUX_2_6_15, VDSO_NAME_LINUX_2_6_29, VDSO_HASH_LINUX_2_6_29, VDSO_NAME_LINUX_4_15, VDSO_HASH_LINUX_4_15): Remove defines. (get_vdso_symbol): New function.
* Fix small error in HP_TIMING_PRINT trailing null char settingChung-Lin Tang2019-09-171-1/+1
| | | | | | | | | | | Fix a small error in the HP_TIMING_PRINT trailing zero setting; the '\0' should be set at MIN(Len,string length), instead of always at the 'Len' position. * sysdeps/generic/hp-timing-common.h (HP_TIMING_PRINT): Correct position of string null termination. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* alpha: force old OSF1 syscalls for getegid, geteuid and getppid [BZ #24986]Aurelien Jarno2019-09-143-0/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | On alpha, Linux kernel 5.1 added the standard getegid, geteuid and getppid syscalls (commit ecf7e0a4ad15287). Up to now alpha was using the corresponding OSF1 syscalls through: - sysdeps/unix/alpha/getegid.S - sysdeps/unix/alpha/geteuid.S - sysdeps/unix/alpha/getppid.S When building against kernel headers >= 5.1, the glibc now use the new syscalls through sysdeps/unix/sysv/linux/syscalls.list. When it is then used with an older kernel, the corresponding 3 functions fail. A quick fix is to move the OSF1 wrappers under the sysdeps/unix/sysv/linux/alpha directory so they override the standard linux ones. A better fix would be to try the new syscalls and fallback to the old OSF1 in case the new ones fail. This can be implemented in a later commit. Changelog: [BZ #24986] * sysdeps/unix/alpha/getegid.S: Move to ... * sysdeps/unix/sysv/linux/alpha/getegid.S: ... here. * sysdeps/unix/alpha/geteuid.S: Move to ... * sysdeps/unix/sysv/linux/alpha/geteuid.S: ... here. * sysdeps/unix/alpha/getppid.S: Move to ... * sysdeps/unix/sysv/linux/alpha/getppid.S: ... here
* Fix three GNU license URLs, along with trailing-newline issues.Paul Eggert2019-09-073-6/+4
|
* Prefer https to http for gnu.org and fsf.org URLsPaul Eggert2019-09-075836-5836/+5836
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Also, change sources.redhat.com to sourceware.org. This patch was automatically generated by running the following shell script, which uses GNU sed, and which avoids modifying files imported from upstream: sed -ri ' s,(http|ftp)(://(.*\.)?(gnu|fsf|sourceware)\.org($|[^.]|\.[^a-z])),https\2,g s,(http|ftp)(://(.*\.)?)sources\.redhat\.com($|[^.]|\.[^a-z]),https\2sourceware.org\4,g ' \ $(find $(git ls-files) -prune -type f \ ! -name '*.po' \ ! -name 'ChangeLog*' \ ! -path COPYING ! -path COPYING.LIB \ ! -path manual/fdl-1.3.texi ! -path manual/lgpl-2.1.texi \ ! -path manual/texinfo.tex ! -path scripts/config.guess \ ! -path scripts/config.sub ! -path scripts/install-sh \ ! -path scripts/mkinstalldirs ! -path scripts/move-if-change \ ! -path INSTALL ! -path locale/programs/charmap-kw.h \ ! -path po/libc.pot ! -path sysdeps/gnu/errlist.c \ ! '(' -name configure \ -execdir test -f configure.ac -o -f configure.in ';' ')' \ ! '(' -name preconfigure \ -execdir test -f preconfigure.ac ';' ')' \ -print) and then by running 'make dist-prepare' to regenerate files built from the altered files, and then executing the following to cleanup: chmod a+x sysdeps/unix/sysv/linux/riscv/configure # Omit irrelevant whitespace and comment-only changes, # perhaps from a slightly-different Autoconf version. git checkout -f \ sysdeps/csky/configure \ sysdeps/hppa/configure \ sysdeps/riscv/configure \ sysdeps/unix/sysv/linux/csky/configure # Omit changes that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/powerpc/powerpc64/ppc-mcount.S: trailing lines git checkout -f \ sysdeps/powerpc/powerpc64/ppc-mcount.S \ sysdeps/unix/sysv/linux/s390/s390-64/syscall.S # Omit change that caused a pre-commit check to fail like this: # remote: *** error: sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S: last line does not end in newline git checkout -f sysdeps/sparc/sparc64/multiarch/memcpy-ultra3.S
* y2038: Introduce the __ASSUME_TIME64_SYSCALLS defineLukasz Majewski2019-09-041-0/+59
| | | | | | | | | | | | | | | | | | | | Add a macro to linux/kernel-features.h, __ASSUME_TIME64_SYSCALLS, to indicate whether the kernel can be assumed to provide a set of system calls that process 64-bit time_t. __ASSUME_TIME64_SYSCALLS does not indicate whether time_t is actually 64 bits (that's __TIMEBITS) and also does not indicate whether the 64-bit time_t system calls have "time64" suffixes on their names. Code that uses __ASSUME_TIME64_SYSCALLS will be added in subsequent patches. * sysdeps/unix/sysv/linux/kernel-features.h (__ASSUME_TIME64_SYSCALLS): New macro. Reviewed-by: Alistair Francis <alistair23@gmail.com> Reviewed-by: Joseph Myers <joseph@codesourcery.com> Reviewed-by: Zack Weinberg <zackw@panix.com>
* Finish move of clock_* functions to libc. [BZ #24959]Zack Weinberg2019-09-0456-143/+205
| | | | | | | | | | | | | | | | In glibc 2.17, the functions clock_getcpuclockid, clock_getres, clock_gettime, clock_nanosleep, and clock_settime were moved from librt.so to libc.so, leaving compatibility stubs behind. Now that the dynamic linker no longer insists on finding versioned symbols in the same library that originally defined them, we do not need the stubs anymore, and this means we don't need GLIBC_PRIVATE __-prefix aliases for most of the functions anymore either. (clock_gettime still needs one.) For ports added before 2.17, libc.so needs to provide two symbol versions for each, the default at GLIBC_2.17 plus a compat version matching what librt had. While I'm at it, move the clock_*.c files and their tests from rt/ to time/.
* Update Alpha libm-test-ulpsAurelien Jarno2019-09-031-8/+8
| | | | | | Changelog: * sysdeps/alpha/fpu/libm-test-ulps: Regenerated using GCC 9.2.
* hurd: Fix buildSamuel Thibault2019-08-301-1/+1
| | | | | * sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn2): Spin-lock '&ss->lock', not 'ss'.
* Use generic memset/memcpy/memmove in benchtestsWilco Dijkstra2019-08-301-1/+0
| | | | | | | | | | | | | | | | | | | | | | | Use the generic C memset/memcpy/memmove in benchtests since comparing against a slow byte-oriented implementation makes no sense. Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> 2019-08-29 Wilco Dijkstra <wdijkstr@arm.com> * benchtests/bench-memcpy.c (simple_memcpy): Remove. (generic_memcpy): Include generic C memcpy. * benchtests/bench-memmove.c (simple_memmove): Remove. (generic_memmove): Include generic C memmove. * benchtests/bench-memset.c (simple_memset): Remove. (generic_memset): Include generic C memset. * benchtests/bench-memset-large.c (simple_memset): Remove. (generic_memset): Include generic C memset. * benchtests/bench-memset-walk.c (simple_memset): Remove. (generic_memset): Include generic C memset. * string/memcpy.c (MEMCPY): Add defines to enable redirection. * string/memset.c (MEMSET): Likewise. * sysdeps/x86_64/memcopy.h: Remove empty file.
* nptl: Move pthread_attr_getinheritsched implementation into libcFlorian Weimer2019-08-3028-28/+0
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* hurd: Fix SS_ONSTACK supportSamuel Thibault2019-08-301-26/+42
| | | | | | | * sysdeps/mach/hurd/i386/sigreturn.c (__sigreturn2): New function, unlocks SS and returns to the saved PC. (__sigreturn): Do not unlock SS, and "return" into __sigreturn2 on the thread stack instead of the saved PC.
* hurd: Remove optimizing anonymous maps as __vm_allocate.Samuel Thibault2019-08-301-23/+0
| | | | | | | | Optimizing anonymous maps brings bugs, and does not optimize much anyway. [BZ #19903] * sysdeps/mach/hurd/mmap.c (__mmap): Remove optimizing anonymous maps as __vm_allocate.
* hurd getcwd: Allow unknown root directorySamuel Thibault2019-08-301-12/+0
| | | | | | | | | | | To be efficient, the remap translator simply returns ports from the underlying filesystem, and thus the root directory found through browsing '..' is the underlying root, not the remap root. This should not be a reason for getcwd to fail. * sysdeps/mach/hurd/getcwd.c (_hurd_canonicalize_directory_name_internal): Do not remove the heading slash if we got an unknown root directory. (__getcwd): Do not fail with EGRATUITOUS if we got an unknown root directory.
* hurd: Fix implementation of setitimer.Samuel Thibault2019-08-301-8/+12
| | | | | | | | | The preemptor sigcode doesn't match since the POSIX sigcode SI_TIMER is used when SIGALRM is sent. In addition, The inline version of hurd_preempt_signals doesn't update _hurdsig_preempted_set. For these reasons, the preemptor would be skipped by post_signal. * sysdeps/mach/hurd/setitimer.c (setitimer_locked): Fix preemptor setup.
* MIPS support for GNU hashMihailo Stojanovic2019-08-295-1/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch is a reimplementation of [1], which was submitted back in 2015. Copyright issue has been sorted [2] last year. It proposed a new section (.gnu.xhash) and related dynamic tag (GT_GNU_XHASH). The new section would be virtually identical to the existing .gnu.hash except for the translation table (xlat) which would contain correct MIPS .dynsym indexes corresponding to the hashvals in chains. This is because MIPS ABI imposes a different ordering of the dynsyms than the one expected by the .gnu.hash section. Another addition would be a leading word at the beggining of the section, which would contain the number of entries in the translation table. In this patch, the new section name and dynamic tag are changed to reflect the fact that the section should be treated as MIPS specific (.MIPS.xhash and DT_MIPS_XHASH). This patch addresses the alignment issue reported in [3] which is caused by the leading word of the .MIPS.xhash section. Leading word is now removed in the corresponding binutils patch, and the number of entries in the translation table is computed using DT_MIPS_SYMTABNO dynamic tag. Since the MIPS specific dl-lookup.c file was removed following the initial patch submission, I opted for the definition of three new macros in the generic ldsodefs.h. ELF_MACHINE_GNU_HASH_ADDRIDX defines the index of the dynamic tag in the l_info array. ELF_MACHINE_HASH_SYMIDX is used to calculate the index of a symbol in GNU hash. On MIPS, it is defined to look up the symbol index in the translation table. ELF_MACHINE_XHASH_SETUP is defined for MIPS only. It initializes the .MIPS.xhash pointer in the link_map_machine struct. The other major change is bumping the highest EI_ABIVERSION value for MIPS to suggest that the dynamic linker now supports GNU hash. The patch was tested by running the glibc testsuite for the three MIPS ABIs (o32, n32 and n64) and for x86_64-linux-gnu. [1] https://sourceware.org/ml/binutils/2015-10/msg00057.html [2] https://sourceware.org/ml/binutils/2018-03/msg00025.html [3] https://sourceware.org/ml/binutils/2016-01/msg00006.html * elf/dl-addr.c (determine_info): Calculate the symbol index using the newly defined ELF_MACHINE_HASH_SYMIDX macro. * elf/dl-lookup.c (do_lookup_x): Ditto. (_dl_setup_hash): Initialize MIPS xhash translation table. * elf/elf.h (SHT_MIPS_XHASH): New define. (DT_MIPS_XHASH): New define. * sysdeps/generic/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/ldsodefs.h (ELF_MACHINE_GNU_HASH_ADDRIDX): New define. (ELF_MACHINE_HASH_SYMIDX): Ditto. (ELF_MACHINE_XHASH_SETUP): Ditto. * sysdeps/mips/linkmap.h (struct link_map_machine): New member. * sysdeps/unix/sysv/linux/mips/ldsodefs.h: Increment valid ABI version. * sysdeps/unix/sysv/linux/mips/libc-abis: New ABI version.
* sh: Split BE/LE abilistAdhemerval Zanella2019-08-2936-9/+3744
| | | | | | | | | | | | | | | | | | | | The fix for BZ#18231 requires new symbols only for sh4eb. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for sh4eb-linux-gnu and sh4-linux-gnu. * sysdeps/sh/preconfigure.ac: New file. * sysdeps/sh/preconfigure: Regenerate. * sysdeps/sh/be/sh3/Implies: New file. * sysdeps/sh/be/sh4/Implies: Likewise. * sysdeps/sh/le/sh3/Implies: Likewise. * sysdeps/sh/le/sh4/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/le/sh3/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/le/sh4/Implies: Likewise. * sysdeps/unix/sysv/linux/sh/*.abilist: Move to sysdeps/unix/sysv/linux/sh/le/*.abilist. * sysdeps/unix/sysv/linux/sh/be/*.abilist: New files.
* microblaze: Split BE/LE abilistAdhemerval Zanella2019-08-2930-1/+3651
| | | | | | | | | | | | | | | | | | | The fix for BZ#18231 requires new symbols only for microblaze. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for microblaze-linux-gnueabihf and microblazeel-linux-gnueabihf. * sysdeps/microblaze/preconfigure.ac: New file. * sysdeps/microblaze/preconfigure: Regenerate. * sysdeps/microblaze/be/implies: New file. * sysdeps/microblaze/le/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/be/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/le/implies: Likewise. * sysdeps/unix/sysv/linux/microblaze/*.abilist. Move to sysdeps/unix/sysv/linux/microblaze/be/*.abilist. * sysdeps/unix/sysv/linux/microblaze/le/*.abilist: New files.
* arm: Split BE/LE abilistAdhemerval Zanella2019-08-2935-2/+3690
| | | | | | | | | | | | | | | | | | | | | The fix for BZ#18231 requires new symbols only for armeb. This patch adds the required folder and files for both BE and LE abilist. No semantic changes are expected. Checked with check-abi for arm-linux-gnueabihf and armeb-linux-gnueabihf. * sysdeps/arm/preconfigure.ac: Set machine based on endianness. * sysdeps/arm/preconfigure: Regenerate. * sysdeps/arm/be/Implies: New file. * sysdeps/arm/be/armv6/Implies: Likewise. * sysdeps/arm/be/armv6t2/Implies: Likewise. * sysdeps/arm/be/armv7/Implies: Likewise. * sysdeps/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/be/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/le/Implies: Likewise. * sysdeps/unix/sysv/linux/arm/*.abilist: Move to sysdeps/unix/sysv/linux/arm/le/*.abilist. * sysdeps/unix/sysv/linux/arm/be/l*.abilist: New files.
* [powerpc] fegetenv_status: simplify instruction generationPaul A. Clarke2019-08-281-15/+6
| | | | | | | | | | | | | | fegetenv_status() wants to use the lighter weight instruction 'mffsl' for reading the Floating-Point Status and Control Register (FPSCR). It currently will use it directly if compiled '-mcpu=power9', and will perform a runtime check (cpu_supports("arch_3_00")) otherwise. Nicely, it turns out that the 'mffsl' instruction will decode to 'mffs' on architectures older than "arch_3_00" because the additional bits set for 'mffsl' are "don't care" for 'mffs'. 'mffs' is a superset of 'mffsl'. So, just generate 'mffsl'.
* [powerpc] fesetenv: optimize FPSCR accessPaul A. Clarke2019-08-281-8/+4
| | | | | | | | | | | | | | fesetenv() reads the current value of the Floating-Point Status and Control Register (FPSCR) to determine the difference between the current state of exception enables and the newly requested state. All of these bits are also returned by the lighter weight 'mffsl' instruction used by fegetenv_status(). Use that instead. Also, remove a local macro _FPU_MASK_ALL in favor of a common macro, FPU_ENABLES_MASK from fenv_libc.h. Finally, use a local variable ('new') in favor of a pointer dereference ('*envp').
* [powerpc] SET_RESTORE_ROUND improvementsPaul A. Clarke2019-08-281-2/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SET_RESTORE_ROUND uses libc_feholdsetround_ppc_ctx and libc_feresetround_ppc_ctx to bracket a block of code where the floating point rounding mode must be set to a certain value. For the *prologue*, libc_feholdsetround_ppc_ctx is used and performs: 1. Read/save FPSCR. 2. Create new value for FPSCR with new rounding mode and enables cleared. 3. If new value is different than current value, a. If transitioning from a state where some exceptions enabled, enter "ignore exceptions / non-stop" mode. b. Write new value to FPSCR. c. Put a mark on the wall indicating the FPSCR was changed. (1) uses the 'mffs' instruction. On POWER9, the lighter weight 'mffsl' instruction can be used, but it doesn't return all of the bits in the FPSCR. fegetenv_status uses 'mffsl' on POWER9, 'mffs' otherwise, and can thus be used instead of fegetenv_register. (3b) uses 'mtfsf 0b11111111' to write the entire FPSCR, so it must instead use 'mtfsf 0b00000011' to write just the enables and the mode, because some of the rest of the bits are not valid if 'mffsl' was used. fesetenv_mode uses 'mtfsf 0b00000011' on POWER9, 'mtfsf 0b11111111' otherwise. For the *epilogue*, libc_feresetround_ppc_ctx checks the mark on the wall, then calls libc_feresetround_ppc, which just calls __libc_femergeenv_ppc with parameters such that it performs: 1. Retreive saved value of FPSCR, saved in prologue above. 2. Read FPSCR. 3. Create new value of FPSCR where: - Summary bits and exception indicators = current OR saved. - Rounding mode and enables = saved. - Status bits = current. 4. If transitioning from some exceptions enabled to none, enter "ignore exceptions / non-stop" mode. 5. If transitioning from no exceptions enabled to some, enter "catch exceptions" mode. 6. Write new value to FPSCR. The summary bits are hardwired to the exception indicators, so there is no need to restore any saved summary bits. The exception indicator bits, which are sticky and remain set unless explicitly cleared, would only need to be restored if the code block might explicitly clear any of them. This is certainly not expected. So, the only bits that need to be restored are the enables and the mode. If it is the case that only those bits are to be restored, there is no need to read the FPSCR. Steps (2) and (3) are unnecessary, and step (6) only needs to write the bits being restored. We know we are transitioning out of "ignore exceptions" mode, so step (4) is unnecessary, and in step (6), we only need to check the state we are entering.
* [powerpc] fe{en,dis}ableexcept, fesetmode: optimize FPSCR accessesPaul A. Clarke2019-08-284-24/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Since fe{en,dis}ableexcept() and fesetmode() read-modify-write just the "mode" (exception enable and rounding mode) bits of the Floating Point Status Control Register (FPSCR), the lighter weight 'mffsl' instruction can be used to read the FPSCR (enables and rounding mode), and 'mtfsf 0b00000011' can be used to write just those bits back to the FPSCR. The net is better performance. In addition, fe{en,dis}ableexcept() read the FPSCR again after writing it, or they determine that it doesn't need to be written because it is not changing. In either case, the local variable holds the current values of the enable bits in the FPSCR. This local variable can be used instead of again reading the FPSCR. Also, that value of the FPSCR which is read the second time is validated against the requested enables. Since the write can't fail, this validation step is unnecessary, and can be removed. Instead, the exceptions to be enabled (or disabled) are transformed into available bits in the FPSCR, then validated after being transformed back, to ensure that all requested bits are actually being set. For example, FE_INVALID_SQRT can be requested, but cannot actually be set. This bit is not mapped during the transformations, so a test for that bit being set before and after transformations will show the bit would not be set, and the function will return -1 for failure. Finally, convert the local macros in fesetmode.c to more generally useful macros in fenv_libc.h.
* [powerpc] fe{en,dis}ableexcept optimize bit translationsPaul A. Clarke2019-08-283-33/+63
| | | | | | | | | | | The exceptions passed to fe{en,dis}ableexcept() are defined in the ABI as a bitmask, a combination of FE_INVALID, FE_OVERFLOW, etc. Within the functions, these bits must be translated to/from the corresponding enable bits in the Floating Point Status Control Register (FPSCR). This translation is currently done bit-by-bit. The compiler generates a series of conditional bit operations. Nicely, the "FE" exception bits are all a uniform offset from the FPSCR enable bits, so the bit-by-bit operation can instead be performed by a shift with appropriate masking.
* nptl: Move pthread_attr_setdetachstate implementation into libcFlorian Weimer2019-08-2825-25/+0
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* Don't put non-ASCII into installed headersPaul Eggert2019-08-236-7/+2
| | | | | | | | Move non-ASCII contributor names from installed headers into contrib.texi when possible, and when it's not (the copyright notice in sysdeps/unix/sysv/linux/mips/sys/user.h) go back to ASCIIfied names. Problem reported by Joseph Myers in: https://www.sourceware.org/ml/libc-alpha/2019-08/msg00646.html
* Fix spellings of contributor names in comments and docPaul Eggert2019-08-2318-19/+19
|
* [MIPS] Raise highest supported EI_ABIVERSION value [BZ #24916]Mihailo Stojanovic2019-08-234-1/+79
| | | | | | | | | | | | | | | | | | | | | | | | | | This bumps the highest valid EI_ABIVERSION value to ABSOLUTE ABI. New testcase loads the symbol from the GOT with the "lb" instruction so that the EI_ABIVERSION header field of the shared object is set to ABSOLUTE (it doesn't actually check the value of the symbol), and makes sure that the main executable is executed without "ABI version invalid" error. Tested for all three ABIs (o32, n32, n64) using both static linker which handles undefined weak symbols correctly [1] (and sets the EI_ABIVERSION of the test module) and the one that doesn't (EI_ABIVERSION left as 0). [1] https://sourceware.org/ml/binutils/2018-07/msg00268.html [BZ #24916] * sysdeps/mips/Makefile [$(subdir) = elf] (tests): Add tst-undefined-weak. [$(subdir) = elf] (modules-names): Add tst-undefined-weak-lib. [$(subdir) = elf] ($(objpfx)tst-undefined-weak): Add dependency. * sysdeps/mips/tst-undefined-weak-lib.S: New file. * sysdeps/mips/tst-undefined-weak.c: Likewise. * sysdeps/unix/sysv/linux/mips/ldsodefs.h (VALID_ELF_ABIVERSION): Increment highest valid ABIVERSION value.
* mips: Force RWX stack for hard-float builds that can run on pre-4.8 kernelsDragan Mladjenovic2019-08-233-5/+89
| | | | | | | | | | | | | | | | | | | | | | | | | | Linux/Mips kernels prior to 4.8 could potentially crash the user process when doing FPU emulation while running on non-executable user stack. Currently, gcc doesn't emit .note.GNU-stack for mips, but that will change in the future. To ensure that glibc can be used with such future gcc, without silently resulting in binaries that might crash in runtime, this patch forces RWX stack for all built objects if configured to run against minimum kernel version less than 4.8. * sysdeps/unix/sysv/linux/mips/Makefile (test-xfail-check-execstack): Move under mips-has-gnustack != yes. (CFLAGS-.o*, ASFLAGS-.o*): New rules. Apply -Wa,-execstack if mips-force-execstack == yes. * sysdeps/unix/sysv/linux/mips/configure: Regenerated. * sysdeps/unix/sysv/linux/mips/configure.ac (mips-force-execstack): New var. Set to yes for hard-float builds with minimum_kernel < 4.8.0 or minimum_kernel not set at all. (mips-has-gnustack): New var. Use value of libc_cv_as_noexecstack if mips-force-execstack != yes, otherwise set to no.
* linux: Make profil_counter a compat_symbol (BZ#17726)Adhemerval Zanella2019-08-232-2/+8
| | | | | | | | | | | | | | | As indicated by Joseph's comment on BZ#17726, this symbol is most likely a historical ABI accident. This patch make it on both arm and sparc ABIs a compat_symbol. Checked against a build arm-linux-gnueabihf, sparcv9-linux-gnu, adn sparc64-linux-gnu to see if the symbol is still present. * gmon/Versions (libc) [GLIBC_2.31]: New entry. * sysdeps/unix/sysv/linux/arm/profil-counter.h (profil_counter): Make a compat_symbol. * sysdeps/unix/sysv/linux/sparc/profil-counter.h (__profil_counter_global): Likewise.
* Refactor sigcontextinfo.hAdhemerval Zanella2019-08-2350-961/+880
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch refactor sigcontextinfo.h header to use SA_SIGINFO as default for both gmon and debug implementations. This allows simplify profil-counter.h on Linux to use a single implementation and remove the requirements for newer ports to redefine __sigaction/sigaction to use SA_SIGINFO. The GET_PC macro is also replaced with a function sigcontext_get_pc that returns an uintptr_t instead of a void pointer. It allows easier convertion to integer on ILP32 architecture, such as x32, without the need to suppress compiler warnings. The patch also requires some refactor of register-dump.h file for some architectures (to reflect it is now called from a sa_sigaction instead of sa_handler signal context). - Alpha, i386, and s390 are straighfoward to take in consideration the new argument type. - ia64 takes in consideration the kernel pass a struct sigcontextt as third argument for sa_sigaction. - sparc take in consideration the kernel pass a pt_regs struct as third argument for sa_sigaction. - m68k dummy function is removed and the FP state is dumped on register_dump itself. - For SH the register-dump.h file is consolidate on a common implementation and the floating-point state is checked based on ownedfp field. The register_dump does not change its output format in any affected architecture. I checked on x86_64-linux-gnu, i686-linux-gnu, aarch64-linux-gnu, arm-linux-gnueabihf, sparcv9-linux-gnu, sparc64-linux-gnu, powerpc-linux-gnu, powerpc64-linux-gnu, and powerpc64le-linux-gnu. I also checked the libSegFault.so through catchsegv on alpha-linux-gnu, m68k-linux-gnu and sh4-linux-gnu to confirm the output has not changed. Adhemerval Zanella <adhemerval.zanella@linaro.org> Florian Weimer <fweimer@redhat.com> * debug/segfault.c (install_handler): Use SA_SIGINFO if defined. * sysdeps/generic/profil-counter.h (__profil_counter): Cast to uintptr_t. * sysdeps/generic/sigcontextinfo.h (GET_PC): Rename to sigcontext_get_pc and return aligned cast to uintptr_t. * sysdeps/mach/hurd/i386/sigcontextinfo.h (GET_PC): Likewise. * sysdeps/posix/profil.c (profil_count): Change PC argument to uintptr_t. (__profil): Use SA_SIGINFO. * sysdeps/posix/sprofil.c (profil_count): Change PCP argument to uintptr_t. (__sprofil): Use SA_SIGINFO. * sysdeps/unix/sysv/linux/profil-counter.h: New file. * sysdeps/unix/sysv/linux/aarch64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/csky/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/hppa/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/i386/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/ia64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/mips/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/nios2/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/riscv/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/profil-counter.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/sh/profil-counter.h: Likewise. * sysdeps/unix/sysv/linux/arm/profil-counter.h (__profil_counter): Assume SA_SIGINFO and use sigcontext_get_pc instead of GET_PC. * sysdeps/unix/sysv/linux/sparc/profil-counter.h: New file. * sysdeps/unix/sysv/linux/sparc/sparc64/profil-counter.h: Remove file. * sysdeps/unix/sysv/linux/sparc/sparc32/profil-counter.h: Likewise. * sysdpes/unix/sysv/linux/aarch64/sigcontextinfo.h (SIGCONTEXT, GET_PC, __sigaction, sigaction): Remove defines. (sigcontext_get_pc): New function. * sysdeps/unix/sysv/linux/alpha/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/arm/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/csky/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/hppa/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/i386/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/ia64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/m68k/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/mips/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/nios2/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/s390/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/microblaze/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/powerpc/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/riscv/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/sh/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc32/sigcontextinfo.h: Likewise. * sysdeps/sysv/linux/sparc/sparc64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/x86_64/sigcontextinfo.h: Likewise. * sysdeps/unix/sysv/linux/alpha/register-dump.h (register_dump): Handle CTX argument as ucontext_t. * sysdeps/unix/sysv/linux/i386/register-dump.h: Likewise. Likewise. * sysdeps/unix/sysv/linux/m68k/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-32/register-dump.h: Likewise. * sysdeps/sysv/linux/s390/s390-64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sh/register-dump.h: New file. * sysdeps/unix/sysv/linux/sh/sh4/register-dump.h: Remove File. * sysdeps/unix/sysv/linux/sh/sh3/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/register-dump.h: Likewise. * sysdeps/unix/sysv/linux/Makefile (tests-internal): Add tst-sigcontextinfo-get_pc. * sysdeps/unix/sysv/linux/tst-sigcontextinfo-get_pc.c: New file. (CFLAGS-tst-sigcontextinfo-get_pc.c): New rule.
* Add RTLD_SINGLE_THREAD_P on generic single-thread.hAdhemerval Zanella2019-08-231-0/+1
| | | | | * sysdeps/generic/single-thread.h (RTLD_SINGLE_THREAD_P): Add definition.
* powerpc: Fix typos and field name in commentsGustavo Romero2019-08-221-4/+4
| | | | | | | | | Fix a couple of typos and v_regs field name in mcontext_t. * sysdeps/unix/sysv/linux/powerpc/sys/ucontext.h: Fix typos and field name in mcontext_t struct. Reviewed-by: Tulio Magno Quites Machado Filho <tuliom@linux.ibm.com>
* Don't use the argument to time.Zack Weinberg2019-08-211-2/+2
| | | | | | | | | | | | | | | | | | | It doesn't make sense to remove all the internal uses of time. It's still a standard ISO C function, and its callers don't need sub-second resolution and would be unnecessarily complicated if they had to declare a struct timespec instead of just a time_t. However, a handful of places were using the vestigial "result" argument instead of the return value, which is slightly less efficient and also looks strange. Correct this. * misc/syslog.c (__vsyslog_internal) * time/getdate.c (__getdate_r) * time/tst_wcsftime.c (main): Use return value of time, not its argument. * string/strfry.c (strfry) * sysdeps/mach/sleep.c (__sleep): Remove unnecessary casts of NULL in calls to time.
* Update i386 libm-test-ulpsAndreas Schwab2019-08-201-2/+2
|
* Do not print backtraces on fatal glibc errorsFlorian Weimer2019-08-192-64/+4
| | | | | | | | | | | | | | | | | | | | If the process is in a bad state, we used to print backtraces in many cases. This is problematic because doing so could involve a lot of work, like loading libgcc_s using the dynamic linker, and this could itself be targeted by exploit writers. For example, if the crashing process was forked from a long-lived process, the addresses in the error message could be used to bypass ASLR. Commit ed421fca42fd9b4cab7c66e77894b8dd7ca57ed0 ("Avoid backtrace from __stack_chk_fail [BZ #12189]"), backtraces where no longer printed because backtrace_and_maps was always called with do_abort == 1. Rather than fixing this logic error, this change removes the backtrace functionality from the sources. With the prevalence of external crash handlers, it does not appear to be particularly useful. The crash handler may also destroy useful information for debugging. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
* nptl: Move pthread_attr_getdetachstate implementation into libcFlorian Weimer2019-08-1625-25/+0
| | | | Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
* nptl: Move pthread_attr_init implementation into libcFlorian Weimer2019-08-1525-34/+0
| | | | | Both the original GLIB_2.0 version and the current GLIBC_2.1 version need to be moved.
* Make totalorder and totalordermag functions take pointer arguments.Joseph Myers2019-08-1543-52/+712
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The resolution of C floating-point Clarification Request 25 <http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2397.htm#dr_25> is that the totalorder and totalordermag functions should take pointer arguments, and this has been adopted in C2X (with const added; note that the integration of this change into C2X is present in the C standard git repository but postdates the most recent public PDF draft). This patch updates glibc accordingly. As a defect resolution, the API is changed unconditionally rather than supporting any sort of TS 18661-1 mode for compilation with the old version of the API. There are compat symbols for existing binaries that pass floating-point arguments directly. As a consequence of changing to pointer arguments, there are no longer type-generic macros in tgmath.h for these functions. Because of the fairly complicated logic for creating libm function aliases and determining the set of aliases to create in a given glibc configuration, rather than duplicating all that in individual source files to create the versioned and compat symbols, the source files for the various versions of totalorder functions are set up to redefine weak_alias before using libm_alias_* macros to create the symbols required. In turn, this requires creating a separate alias for each symbol version pointing to the same implementation (see binutils bug <https://sourceware.org/bugzilla/show_bug.cgi?id=23840>), which is done automatically using __COUNTER__. (As I noted in <https://sourceware.org/ml/libc-alpha/2018-10/msg00631.html>, it might well make sense for glibc's symbol versioning macros to do that alias creation with __COUNTER__ themselves, which would somewhat simplify the logic in the totalorder source files.) It is of course desirable to test the compat symbols. I did this with the generic libm-test machinery, but didn't wish to duplicate the actual tables of test inputs and outputs, and thought it risky to attempt to have a single object file refer to both default and compat versions of the same function in order to test them together. Thus, I created libm-test-compat_totalorder.inc and libm-test-compat_totalordermag.inc which include the generated .c files (with the processed version of those tables of inputs) from the non-compat tests, and added appropriate dependencies. I think this provides sufficient test coverage for the compat symbols without also needing to make the special ldbl-96 and ldbl-128ibm tests (of peculiarities relating to the representations of those formats that can't be covered in the generic tests) run for the compat symbols. Tests of compat symbols need to be internal tests, meaning _ISOMAC is not defined. Making some libm-test tests into internal tests showed up two other issues. GCC diagnoses duplicate macro definitions of __STDC_* macros, including __STDC_WANT_IEC_60559_TYPES_EXT__; I added an appropriate conditional and filed <https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91451> for this issue. On ia64, include/setjmp.h ends up getting included indirectly from libm-symbols.h, resulting in conflicting definitions of the STR macro (also defined in libm-test-driver.c); I renamed the macros in include/setjmp.h. (It's arguable that we should have common internal headers used everywhere for stringizing and concatenation macros.) Tested for x86_64 and x86, and with build-many-glibcs.py. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalorder): Take pointer arguments. [__GLIBC_USE (IEC_60559_BFP_EXT) || __MATH_DECLARING_FLOATN] (totalordermag): Likewise. * manual/arith.texi (totalorder): Likewise. (totalorderf): Likewise. (totalorderl): Likewise. (totalorderfN): Likewise. (totalorderfNx): Likewise. (totalordermag): Likewise. (totalordermagf): Likewise. (totalordermagl): Likewise. (totalordermagfN): Likewise. (totalordermagfNx): Likewise. * math/tgmath.h (__TGMATH_BINARY_REAL_RET_ONLY): Remove macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalorder): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (totalordermag): Likewise. * math/Versions (GLIBC_2.31): Add totalorder, totalorderf, totalorderl, totalordermag, totalordermagf, totalordermagl, totalorderf32, totalorderf64, totalorderf32x, totalordermagf32, totalordermagf64, totalordermagf32x, totalorderf64x, totalordermagf64x, totalorderf128 and totalordermagf128. * math/Makefile (libm-test-funcs-noauto): Add compat_totalorder and compat_totalordermag. (libm-test-funcs-compat): New variable. (libm-tests-compat): Likewise. (tests): Do not include compat tests. (tests-internal): Add compat tests. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalorder.o)): Depend on $(objpfx)libm-test-totalorder.c. ($(foreach t,$(libm-tests-base), $(objpfx)$(t)-compat_totalordermag.o): Depend on $(objpfx)libm-test-totalordermag.c. (tgmath3-macros): Remove totalorder and totalordermag. * math/libm-test-compat_totalorder.inc: New file. * math/libm-test-compat_totalordermag.inc: Likewise. * math/libm-test-driver.c (struct test_ff_i_data): Update comment. (RUN_TEST_fpfp_b): New macro. (RUN_TEST_LOOP_fpfp_b): Likewise. * math/libm-test-totalorder.inc (totalorder_test_data): Use TEST_fpfp_b. (totalorder_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/libm-test-totalordermag.inc (totalordermag_test_data): Use TEST_fpfp_b. (totalordermag_test): Condition on [!COMPAT_TEST]. (do_test): Likewise. * math/gen-tgmath-tests.py (Tests.add_all_tests): Remove totalorder and totalordermag. * math/test-tgmath.c (NCALLS): Change to 132. (F(compile_test)): Do not call totalorder or totalordermag. (F(totalorder)): Remove. (F(totalordermag)): Likewise. * include/float.h (__STDC_WANT_IEC_60559_TYPES_EXT__): Do not define if [__STDC_WANT_IEC_60559_TYPES_EXT__]. * include/setjmp.h [!_ISOMAC] (STR_HELPER): Rename to SJSTR_HELPER. [!_ISOMAC] (STR): Rename to SJSTR. Update call to STR_HELPER. [!_ISOMAC] (TEST_SIZE): Update call to STR. [!_ISOMAC] (TEST_ALIGN): Likewise. [!_ISOMAC] (TEST_OFFSET): Likewise. * sysdeps/ieee754/dbl-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalorder.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorder): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/dbl-64/wordsize-64/s_totalordermag.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermag): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/float128/float128_private.h (__totalorder_compatl): New macro. (__totalordermag_compatl): Likewise. * sysdeps/ieee754/flt-32/s_totalorderf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/flt-32/s_totalordermagf.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagf): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalorderl.c: Include <shlib-compat.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-128ibm/s_totalordermagl.c: Include <shlib-compat.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalorderl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalorderl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-96/s_totalordermagl.c: Include <shlib-compat.h> and <first-versions.h>. (__totalordermagl): Take pointer arguments. Add symbol versions and compat symbols. * sysdeps/ieee754/ldbl-opt/nldbl-totalorder.c (totalorderl): Take pointer arguments. * sysdeps/ieee754/ldbl-opt/nldbl-totalordermag.c (totalordermagl): Likewise. * sysdeps/ieee754/ldbl-128ibm/test-totalorderl-ldbl-128ibm.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/ieee754/ldbl-96/test-totalorderl-ldbl-96.c (do_test): Update calls to totalorderl and totalordermagl. * sysdeps/mach/hurd/i386/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/csky/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/be/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/le/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/riscv/rv64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* login: Add nonstring attributes to struct utmp, struct utmpx [BZ #24899]Florian Weimer2019-08-153-9/+18
| | | | | | | | Commit 7532837d7b03b3ca5b9a63d77a5bd81dd23f3d9c ("The -Wstringop-truncation option new in GCC 8 detects common misuses") added __attribute_nonstring__ to bits/utmp.h, but it did not update the parallel bits/utmpx.h header. In struct utmp, the nonstring attribute for ut_id was missing.
* nptl: Remove pthread_self compatibility symbol from libpthreadFlorian Weimer2019-08-1522-22/+0
| | | | | The symbol is no longer needed because since glibc 2.30, the dynamic loader continues searching for the symbol in libc.
* nptl: Move pthread_attr_destroy implementation into libcFlorian Weimer2019-08-1525-25/+0
|
* Update i386 libm-test-ulpsAndreas Schwab2019-08-151-4/+4
|
* nptl: Move pthread_equal implementation into libcFlorian Weimer2019-08-1525-25/+0
|
* aarch64: Disable using DC ZVA in emag memsetFeng Xue2019-08-142-7/+17
| | | | | | | * sysdeps/aarch64/multiarch/memset_base64.S (DC_ZVA_THRESHOLD): Disable DC ZVA code if this macro is defined as zero. * sysdeps/aarch64/multiarch/memset_emag.S (DC_ZVA_THRESHOLD): Change to zero to disable using DC ZVA.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-11-09 05:45:28 +0000