summary refs log tree commit diff
path: root/sysdeps
Commit message (Collapse)AuthorAgeFilesLines
* Do not stack-protect sigreturn stubs [BZ #7065]Nick Alcock2016-12-262-3/+9
| | | | | | | | | | | | These are called from the kernel with the stack at a carefully- chosen location so that the stack frame can be restored: they must not move the stack pointer lest garbage be restored into the registers. We explicitly inhibit protection for SPARC and for signal/sigreturn.c: other arches either define their sigreturn stubs in .S files, or (i386, x86_64, mips) use macros expanding to top-level asm blocks and explicit labels in the text section to mock up a "function" without telling the compiler that one is there at all.
* PLT avoidance for __stack_chk_fail [BZ #7065]Nick Alcock2016-12-261-0/+12
| | | | | | Add a hidden __stack_chk_fail_local alias to libc.so, and make sure that on targets which use __stack_chk_fail, this does not introduce a local PLT reference into libc.so.
* Compile the dynamic linker without stack protection [BZ #7065]Nick Alcock2016-12-261-1/+1
| | | | | Also compile corresponding routines in the static libc.a with the same flag.
* Do not stack-protect ifunc resolvers [BZ #7065]Nick Alcock2016-12-266-0/+8
| | | | | | | | | | | When dynamically linking, ifunc resolvers are called before TLS is initialized, so they cannot be safely stack-protected. We avoid disabling stack-protection on large numbers of files by using __attribute__ ((__optimize__ ("-fno-stack-protector"))) to turn it off just for the resolvers themselves. (We provide the attribute even when statically linking, because we will later use it elsewhere too.)
* Initialize the stack guard earlier when linking statically [BZ #7065]Nick Alcock2016-12-261-0/+11
| | | | | | | | | | | | | | | | | | | | The address of the stack canary is stored in a per-thread variable, which means that we must ensure that the TLS area is intialized before calling any -fstack-protector'ed functions. For dynamically linked applications, we ensure this (in a later patch) by disabling -fstack-protector for the whole dynamic linker, but for static applications, the AT_ENTRY address is called directly by the kernel, so we must deal with the problem differently. In static appliations, __libc_setup_tls performs the TCB setup and TLS initialization, so this commit arranges for it to be called early and unconditionally. The call (and the stack guard initialization) is before the DL_SYSDEP_OSCHECK hook, which if set will probably call functions which are stack-protected (it does on Linux and NaCL too). We also move apply_irel up, so that we can still safely call functions that require ifuncs while in __libc_setup_tls (though if stack-protection is enabled we still have to avoid calling functions that are not stack-protected at this stage).
* This patch cleans up the strsep implementation and improves performance.Wilco Dijkstra2016-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently strsep calls strpbrk is is now a veneer to strcspn. Calling strcspn directly is faster. Since it handles a delimiter string of size 1 as a special case, this is not needed in strsep itself. Although this means there is a slightly higher overhead if the delimiter size is 1, all other cases are slightly faster. The overall performance gain is 5-10% on AArch64. The string/bits/string2.h header contains optimizations for constant delimiters of size 1-3. Benchmarking these showed similar performance for size 1 (since in all cases strchr/strchrnul is used), while size 2 and 3 can give up to 2x speedup for small input strings. However if these cases are common it seems much better to add this optimization to strcspn. So move these header optimizations to string-inlines.c. Improve the strsep benchmark so that it actually benchmarks something. The current version contains a delimiter character at every position in the input string, so there is very little work to do, and the extremely inefficent simple_strsep implementation appears fastest in every case. The new version has either no match in the input for the fail case and a match halfway in the input for the success case. The input is then restored so that each iteration does exactly the same amount of work. Reduce the number of testcases since simple_strsep takes a lot of time now. * benchtests/bench-strsep.c (oldstrsep): Add old implementation. (do_one_test) Restore original string so iteration works. * string/string-inlines.c (do_test): Create better input strings. (test_main) Reduce number of testruns. * string/string-inlines.c (__old_strsep_1c): New function. (__old_strsep_2c): Likewise. (__old_strsep_3c): Likewise. * string/strsep.c (__strsep): Remove case of small delim string. Call strcspn directly rather than strpbrk. * string/bits/string2.h (__strsep): Remove define. (__strsep_1c): Remove. (__strsep_2c): Remove. (__strsep_3c): Remove. (strsep): Remove. * sysdeps/unix/sysv/linux/internal_statvfs.c (__statvfs_getflags): Rename to __strsep.
* Remove unused function _dl_tls_setupFlorian Weimer2016-12-211-6/+0
| | | | | | Commit 7a5e3d9d633c828d84a9535f26b202a6179978e7 (elf: Assume TLS is initialized in _dl_map_object_from_fd) removed the last call of _dl_tls_setup, but did not remove the function itself.
* x86_64: tst-quad1pie, tst-quad2pie: compile with -fPIE [BZ #7065]Nick Alcock2016-12-211-0/+3
| | | | | | With stack protection enabled, these files have external symbol references for the first time, so the fact that they are not compiled with -fPIE and are then linked into a -pie binary starts to hurt.
* Add roundeven, roundevenf, roundevenl.Joseph Myers2016-12-2135-1/+651
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines roundeven functions that round a floating-point number to the nearest integer, in that floating-point type, with ties rounding to even (whereas the round functions round ties away from zero). As with other such functions, they raise no exceptions apart from "invalid" for signaling NaNs. There was a previous user request for this functionality in glibc in <https://sourceware.org/ml/libc-help/2015-02/msg00005.html>. This patch implements these functions for glibc. The implementations use integer bit-manipulation (or roundeven on the high and low parts, in the IBM long double case). It's possible that there may be faster approaches on some architectures (in particular, on AArch64 the frintn instruction should do exactly what's required); I'll leave it to architecture maintainers or others interested to implement such architecture-specific versions if desired. (Where architectures have instructions to round to nearest integer in the current rounding mode, implementations saving and restoring the rounding mode - and dealing with exceptions if those instructions generate "inexact" - are also possible, though their performance depends on the cost of manipulating exceptions / rounding mode state.) Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (roundeven): New macro. * math/Versions (roundeven): New libm symbol at version GLIBC_2.25. (roundevenf): Likewise. (roundevenl): Likewise. * math/Makefile (libm-calls): Add s_roundevenF. * math/libm-test.inc (roundeven_test_data): New array. (roundeven_test): New function. (main): Call roundeven_test. * math/test-tgmath.c (NCALLS): Increase to 134. (F(compile_test)): Call roundeven. (F(roundeven)): New function. * manual/arith.texi (Rounding Functions): Document roundeven, roundevenf and roundevenl. * manual/libm-err-tab.pl (@all_functions): Add roundeven. * include/math.h (roundeven): Use libm_hidden_proto. * sysdeps/ieee754/dbl-64/s_roundeven.c: New file. * sysdeps/ieee754/dbl-64/wordsize-64/s_roundeven.c: Likewise. * sysdeps/ieee754/flt-32/s_roundevenf.c: Likewise. * sysdeps/ieee754/ldbl-128/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-128ibm/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-96/s_roundevenl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add roundeven. (CFLAGS-nldbl-roundeven.c): New variable. * sysdeps/ieee754/ldbl-opt/nldbl-roundeven.c: New file. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* S390: Optimize lock-elision by decrementing adapt_count at unlock.Stefan Liebler2016-12-204-54/+78
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch decrements the adapt_count while unlocking the futex instead of before aquiring the futex as it is done on power, too. Furthermore a transaction is only started if the futex is currently free. This check is done after starting the transaction, too. If the futex is not free and the transaction nesting depth is one, we can simply end the started transaction instead of aborting it. The implementation of this check was faulty as it always ended the started transaction. By using the fallback path, the the outermost transaction was aborted. Now the outermost transaction is aborted directly. This patch also adds some commentary and aligns the code in elision-trylock.c to the code in elision-lock.c as possible. ChangeLog: * sysdeps/unix/sysv/linux/s390/lowlevellock.h (__lll_unlock_elision, lll_unlock_elision): Add adapt_count argument. * sysdeps/unix/sysv/linux/s390/elision-lock.c: (__lll_lock_elision): Decrement adapt_count while unlocking instead of before locking. * sysdeps/unix/sysv/linux/s390/elision-trylock.c (__lll_trylock_elision): Likewise. * sysdeps/unix/sysv/linux/s390/elision-unlock.c: (__lll_unlock_elision): Likewise.
* S390: Use new __libc_tbegin_retry macro in elision-lock.c.Stefan Liebler2016-12-202-28/+58
| | | | | | | | | | | | | | | | | | | | This patch implements __libc_tbegin_retry macro which is equivalent to gcc builtin __builtin_tbegin_retry, except the changes which were applied to __libc_tbegin in the previous patch. If tbegin aborts with _HTM_TBEGIN_TRANSIENT. Then this macros restores the fpc, fprs and automatically retries up to retry_cnt tbegins. Further saving of the state is omitted as it is already saved in the first round. Before retrying a further transaction, the transaction-abort-assist instruction is used to support the cpu. This macro is now used in function __lll_lock_elision. ChangeLog: * sysdeps/unix/sysv/linux/s390/htm.h(__libc_tbegin_retry): New macro. * sysdeps/unix/sysv/linux/s390/elision-lock.c (__lll_lock_elision): Use __libc_tbegin_retry macro.
* S390: Use own tbegin macro instead of __builtin_tbegin.Stefan Liebler2016-12-205-25/+164
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch defines __libc_tbegin, __libc_tend, __libc_tabort and __libc_tx_nesting_depth in htm.h which replaces the direct usage of equivalent gcc builtins. We have to use an own inline assembly instead of __builtin_tbegin, as tbegin has to filter program interruptions which can't be done with the builtin. Before this change, e.g. a segmentation fault within a transaction, leads to a coredump where the instruction pointer points behind the tbegin instruction instead of real failing one. Now the transaction aborts and the code should be reexecuted by the fallback path without transactions. The segmentation fault will produce a coredump with the real failing instruction. The fpc is not saved before starting the transaction. If e.g. the rounging mode is changed and the transaction is aborting afterwards, the builtin will not restore the fpc. This is now done with the __libc_tbegin macro. Now the call saved fprs have to be saved / restored in the __libc_tbegin macro. Using the gcc builtin had forced the saving / restoring of fprs at begin / end of e.g. __lll_lock_elision function. The new macro saves these fprs before tbegin instruction and only restores them on a transaction abort. Restoring is not needed on a successfully started transaction. The used inline assembly does not clobber the fprs / vrs! Clobbering the latter ones would force the compiler to save / restore the call saved fprs as those overlap with the vrs, but they only need to be restored if the transaction fails. Thus the user of the tbegin macros has to compile the file / function with -msoft-float. It prevents gcc from using fprs / vrs. ChangeLog: * sysdeps/unix/sysv/linux/s390/Makefile (elision-CFLAGS): Add -msoft-float. * sysdeps/unix/sysv/linux/s390/htm.h: New File. * sysdeps/unix/sysv/linux/s390/elision-lock.c: Use __libc_t* transaction macros instead of __builtin_t*. * sysdeps/unix/sysv/linux/s390/elision-trylock.c: Likewise. * sysdeps/unix/sysv/linux/s390/elision-unlock.c: Likewise.
* S390: Use C11-like atomics instead of plain memory accesses in lock elision ↵Stefan Liebler2016-12-202-12/+27
| | | | | | | | | | | | | | | | | | code. This uses atomic operations to access lock elision metadata that is accessed concurrently (ie, adapt_count fields). The size of the data is less than a word but accessed only with atomic loads and stores. See also x86 commit ca6e601a9d4a72b3699cca15bad12ac1716bf49a: "Use C11-like atomics instead of plain memory accesses in x86 lock elision." ChangeLog: * sysdeps/unix/sysv/linux/s390/elision-lock.c (__lll_lock_elision): Use atomics to load / store adapt_count. * sysdeps/unix/sysv/linux/s390/elision-trylock.c (__lll_trylock_elision): Likewise.
* Add fmaxmag, fminmag functions.Joseph Myers2016-12-2032-1/+227
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines fmaxmag and fminmag functions that return the argument with maximum / minimum magnitude (acting like fmax / fmin if the arguments have the same magnitude or either argument is a NaN). These correspond to the IEEE 754-2008 operations maxNumMag and minNumMag. This patch implements these functions for glibc. They are implemented with type-generic templates. Tests are based on those for fmax and fmin. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New declaration. (fminmag): Likewise. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (fmaxmag): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (fminmag): Likewise. * math/Versions (fmaxmag): New libm symbol at version GLIBC_2.25. (fmaxmagf): Likewise. (fmaxmagl): Likewise. (fminmag): Likewise. (fminmagf): Likewise. (fminmagl): Likewise. * math/Makefile (gen-libm-calls): Add s_fmaxmagF and s_fminmagF. * math/s_fmaxmag_template.c: New file. * math/s_fminmag_template.c: Likewise. * math/libm-test.inc (fmaxmag_test_data): New array. (fmaxmag_test): New function. (fminmag_test_data): New array. (fminmag_test): New function. (main): Call fmaxmag_test and fminmag_test. * math/test-tgmath.c (NCALLS): Increase to 132. (F(compile_test)): Call fmaxmag and fminmag. (F(fminmag)): New function. (F(fmaxmag)): Likewise. * manual/arith.texi (Misc FP Arithmetic): Document fminmag, fminmagf, fminmagl, fmaxmag, fmaxmagf and fmaxmagl. * manual/libm-err-tab.pl (@all_functions): Add fmaxmag and fminmag. * sysdeps/ieee754/ldbl-opt/nldbl-fmaxmag.c: New file. * sysdeps/ieee754/ldbl-opt/nldbl-fminmag.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fmaxmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/s_fminmagl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add fmaxmag and fminmag. (CFLAGS-nldbl-fmaxmag.c): New variable. (CFLAGS-nldbl-fminmag.c): Likewise. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Disable TSX on some Haswell processors.Andrew Senkevich2016-12-191-6/+23
| | | | | | | | | | Patch disables Intel TSX on some Haswell processors to avoid TSX on kernels that weren't updated with the latest microcode package (which disables broken feature by default). * sysdeps/x86/cpu-features.c (get_common_indeces): Add stepping identification. (init_cpu_features): Add handle of Haswell.
* New string function explicit_bzero (from OpenBSD).Zack Weinberg2016-12-1629-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | explicit_bzero(s, n) is the same as memset(s, 0, n), except that the compiler is not allowed to delete a call to explicit_bzero even if the memory pointed to by 's' is dead after the call. Right now, this effect is achieved externally by having explicit_bzero be a function whose semantics are unknown to the compiler, and internally, with a no-op asm statement that clobbers memory. This does mean that small explicit_bzero operations cannot be expanded inline as small memset operations can, but on the other hand, small memset operations do get deleted by the compiler. Hopefully full compiler support for explicit_bzero will happen relatively soon. There are two new tests: test-explicit_bzero.c verifies the visible semantics in the same way as the existing test-bzero.c, and tst-xbzero-opt.c verifies the not-being-optimized-out property. The latter is conceptually based on a test written by Matthew Dempsky for the OpenBSD regression suite. The crypt() implementation has an immediate use for this new feature. We avoid having to add a GLIBC_PRIVATE alias for explicit_bzero by running all of libcrypt's calls through the fortified variant, __explicit_bzero_chk, which is in the impl namespace anyway. Currently I'm not aware of anything in libc proper that needs this, but the glue is all in place if it does become necessary. The legacy DES implementation wasn't bothering to clear its buffers, so I added that, mostly for consistency's sake. * string/explicit_bzero.c: New routine. * string/test-explicit_bzero.c, string/tst-xbzero-opt.c: New tests. * string/Makefile (routines, strop-tests, tests): Add them. * string/test-memset.c: Add ifdeffage for testing explicit_bzero. * string/string.h [__USE_MISC]: Declare explicit_bzero. * debug/explicit_bzero_chk.c: New routine. * debug/Makefile (routines): Add it. * debug/tst-chk1.c: Test fortification of explicit_bzero. * string/bits/string3.h: Fortify explicit_bzero. * manual/string.texi: Document explicit_bzero. * NEWS: Mention addition of explicit_bzero. * crypt/crypt-entry.c (__crypt_r): Clear key-dependent intermediate data before returning, using explicit_bzero. * crypt/md5-crypt.c (__md5_crypt_r): Likewise. * crypt/sha256-crypt.c (__sha256_crypt_r): Likewise. * crypt/sha512-crypt.c (__sha512_crypt_r): Likewise. * include/string.h: Redirect internal uses of explicit_bzero to __explicit_bzero_chk[_internal]. * string/Versions [GLIBC_2.25]: Add explicit_bzero. * debug/Versions [GLIBC_2.25]: Add __explicit_bzero_chk. * sysdeps/arm/nacl/libc.abilist * sysdeps/unix/sysv/linux/aarch64/libc.abilist * sysdeps/unix/sysv/linux/alpha/libc.abilist * sysdeps/unix/sysv/linux/arm/libc.abilist * sysdeps/unix/sysv/linux/hppa/libc.abilist * sysdeps/unix/sysv/linux/i386/libc.abilist * sysdeps/unix/sysv/linux/ia64/libc.abilist * sysdeps/unix/sysv/linux/m68k/coldfire/libc.abilist * sysdeps/unix/sysv/linux/m68k/m680x0/libc.abilist * sysdeps/unix/sysv/linux/microblaze/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/fpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n32/libc.abilist * sysdeps/unix/sysv/linux/mips/mips64/n64/libc.abilist * sysdeps/unix/sysv/linux/nios2/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libc.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc-le.abilist * sysdeps/unix/sysv/linux/powerpc/powerpc64/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-32/libc.abilist * sysdeps/unix/sysv/linux/s390/s390-64/libc.abilist * sysdeps/unix/sysv/linux/sh/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc32/libc.abilist * sysdeps/unix/sysv/linux/sparc/sparc64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libc.abilist * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libc.abilist * sysdeps/unix/sysv/linux/tile/tilepro/libc.abilist * sysdeps/unix/sysv/linux/x86_64/64/libc.abilist * sysdeps/unix/sysv/linux/x86_64/x32/libc.abilist: Add entries for explicit_bzero and __explicit_bzero_chk.
* Fix powerpc64/power7 memchr for large input sizesAdhemerval Zanella2016-12-161-1/+11
| | | | | | | | | | | | | | | | | | | | | | | Current optimized powercp64/power7 memchr uses a strategy to check for p versus align(p+n) (where 'p' is the input char pointer and n the maximum size to check for the byte) without taking care for possible overflow on the pointer addition in case of large 'n'. It was triggered by 3038145ca23 where default rawmemchr (used to created ppc64 rawmemchr in ifunc selection) now uses memchr (p, c, (size_t)-1) on its implementation. This patch fixes it by implement a satured addition where overflows sets the maximum pointer size to UINTPTR_MAX. Checked on powerpc64le-linux-gnu. [BZ# 20971] * sysdeps/powerpc/powerpc64/power7/memchr.S (__memchr): Avoid overflow in pointer addition. * string/test-memchr.c (do_test): Add an argument to pass as the size on memchr. (test_main): Add check for SIZE_MAX.
* Make w_scalbln type-genericGabriel F. T. Gomes2016-12-162-27/+3
| | | | | | | | | This patch converts the wrapper scalbln (which set errno directly rather than doing anything with __kernel_standard) to use the type-generic template machinery, in the same way that has been done for ldexp. Tested for powerpc64le, s390, and x86_64.
* Fix x86, x86_64 fmax, fmin sNaN handling, add tests (bug 20947).Joseph Myers2016-12-1510-27/+231
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Various fmax and fmin function implementations mishandle sNaN arguments: (a) When both arguments are NaNs, the return value should be a qNaN, but sometimes it is an sNaN if at least one argument is an sNaN. (b) Under TS 18661-1 semantics, if either argument is an sNaN then the result should be a qNaN (whereas if one argument is a qNaN and the other is not a NaN, the result should be the non-NaN argument). Various implementations treat sNaNs like qNaNs here. This patch fixes the x86 and x86_64 versions (ignoring float and double for 32-bit x86 given the inability to reliably avoid the sNaN turning into a qNaN before it gets to the called function). Tests of sNaN inputs to these functions are added. Note on architecture versions I haven't changed for this issue: AArch64 already gets this right (it uses a hardware instruction with the correct semantics for both quiet and signaling NaNs) and does not need changes. It's possible Alpha, IA64, SPARC might need changes (this would be shown by the testsuite if so). Tested for x86_64 and x86 (both i686 and i586 builds, to cover the different x86 implementations). [BZ #20947] * sysdeps/i386/fpu/s_fmaxl.S (__fmaxl): Add the arguments when either is a signaling NaN. * sysdeps/i386/fpu/s_fminl.S (__fminl): Likewise. Make code follow fmaxl more closely. * sysdeps/i386/i686/fpu/s_fmaxl.S (__fmaxl): Add the arguments when either is a signaling NaN. * sysdeps/i386/i686/fpu/s_fminl.S (__fminl): Likewise. * sysdeps/x86_64/fpu/s_fmax.S (__fmax): Likewise. * sysdeps/x86_64/fpu/s_fmaxf.S (__fmaxf): Likewise. * sysdeps/x86_64/fpu/s_fmaxl.S (__fmaxl): Likewise. * sysdeps/x86_64/fpu/s_fmin.S (__fmin): Likewise. * sysdeps/x86_64/fpu/s_fminf.S (__fminf): Likewise. * sysdeps/x86_64/fpu/s_fminl.S (__fminl): Likewise. * math/libm-test.inc (fmax_test_data): Add tests of sNaN inputs. (fmin_test_data): Likewise.
* Fix powerpc fmax, fmin sNaN handling (bug 20947).Joseph Myers2016-12-152-2/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Various fmax and fmin function implementations mishandle sNaN arguments: (a) When both arguments are NaNs, the return value should be a qNaN, but sometimes it is an sNaN if at least one argument is an sNaN. (b) Under TS 18661-1 semantics, if either argument is an sNaN then the result should be a qNaN (whereas if one argument is a qNaN and the other is not a NaN, the result should be the non-NaN argument). Various implementations treat sNaNs like qNaNs here. This patch fixes the powerpc versions of these functions (shared by float and double, 32-bit and 64-bit). The structure of those versions is that all ordered cases are already handled before anything dealing with the case where the arguments are unordered; thus, this patch causes no change to the code executed in the common case (neither argument a NaN). Tested for powerpc (32-bit and 64-bit), together with tests to be added along with the x86_64 / x86 fixes. [BZ #20947] * sysdeps/powerpc/fpu/s_fmax.S (__fmax): Add the arguments when either is a signaling NaN. * sysdeps/powerpc/fpu/s_fmin.S (__fmin): Likewise.
* Refactor long double information into bits/long-double.h.Joseph Myers2016-12-1414-152/+37
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Information about whether the ABI of long double is the same as that of double is split between bits/mathdef.h and bits/wordsize.h. When the ABIs are the same, bits/mathdef.h defines __NO_LONG_DOUBLE_MATH. In addition, in the case where the same glibc binary supports both -mlong-double-64 and -mlong-double-128, bits/wordsize.h defines __LONG_DOUBLE_MATH_OPTIONAL, along with __NO_LONG_DOUBLE_MATH if this particular compilation is with -mlong-double-64. As part of the refactoring I proposed in <https://sourceware.org/ml/libc-alpha/2016-11/msg00745.html>, this patch puts all that information in a single header, bits/long-double.h. It is included from sys/cdefs.h alongside the include of bits/wordsize.h, so other headers generally do not need to include bits/long-double.h directly. Previously, various bits/mathdef.h headers and bits/wordsize.h headers had this long double information (including implicitly in some bits/mathdef.h headers through not having the defines present in the default version). After the patch, it's all in six bits/long-double.h headers. Furthermore, most of those new headers are not architecture-specific. Architectures with optional long double all use the ldbl-opt sysdeps directory, either in the order (ldbl-64-128, ldbl-opt, ldbl-128) or (ldbl-128ibm, ldbl-opt). Thus a generic header for the case where long double = double, and headers in ldbl-128, ldbl-96 and ldbl-opt, suffices to cover every architecture except for cases where long double properties vary between different ABIs sharing a set of installed headers; fortunately all the ldbl-opt cases share a single compiler-predefined macro __LONG_DOUBLE_128__ that can be used to tell whether this compilation is -mlong-double-64 or -mlong-double-128. The two cases where a set of headers is shared between ABIs with different long double properties, MIPS (o32 has long double = double, other ABIs use ldbl-128) and SPARC (32-bit has optional long double, 64-bit has required long double), need their own bits/long-double.h headers. As with bits/wordsize.h, multiple-include protection for this header is generally implicit through the include guards on sys/cdefs.h, and multiple inclusion is harmless in any case. There is one subtlety: the header must not define __LONG_DOUBLE_MATH_OPTIONAL if __NO_LONG_DOUBLE_MATH was defined before its inclusion, because doing so breaks how sysdeps/ieee754/ldbl-opt/nldbl-compat.h defines __NO_LONG_DOUBLE_MATH itself before including system headers. Subject to keeping that working, it would be reasonable to move these macros from defined/undefined #ifdef to always-defined 1/0 #if semantics, but this patch does not attempt to do so, just rearranges where the macros are defined. After this patch, the only use of bits/mathdef.h is the alpha one for modifying complex function ABIs for old GCC. Thus, all versions of the header other than the default and alpha versions are removed, as is the include from math.h. Tested for x86_64 and x86. Also did compilation-only testing with build-many-glibcs.py. * bits/long-double.h: New file. * sysdeps/ieee754/ldbl-128/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-96/bits/long-double.h: Likewise. * sysdeps/ieee754/ldbl-opt/bits/long-double.h: Likewise. * sysdeps/mips/bits/long-double.h: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/long-double.h: Likewise. * math/Makefile (headers): Add bits/long-double.h. * misc/sys/cdefs.h: Include <bits/long-double.h>. * stdlib/strtold.c: Include <bits/long-double.h> instead of <bits/wordsize.h>. * bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. [!__NO_LONG_DOUBLE_MATH]: Remove conditional code. * math/math.h: Do not include <bits/mathdef.h>. * sysdeps/aarch64/bits/mathdef.h: Remove file. * sysdeps/alpha/bits/mathdef.h [!_COMPLEX_H]: Do not allow inclusion. * sysdeps/ia64/bits/mathdef.h: Remove file. * sysdeps/m68k/m680x0/bits/mathdef.h: Likewise. * sysdeps/mips/bits/mathdef.h: Likewise. * sysdeps/powerpc/bits/mathdef.h: Likewise. * sysdeps/s390/bits/mathdef.h: Likewise. * sysdeps/sparc/bits/mathdef.h: Likewise. * sysdeps/x86/bits/mathdef.h: Likewise. * sysdeps/s390/s390-32/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Remove conditional code. * sysdeps/s390/s390-64/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/alpha/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/powerpc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise. * sysdeps/unix/sysv/linux/sparc/bits/wordsize.h [!__NO_LONG_DOUBLE_MATH && !__LONG_DOUBLE_MATH_OPTIONAL]: Likewise.
* Include <linux/falloc.h> in bits/fcntl-linux.h.Joseph Myers2016-12-141-9/+1
| | | | | | | | | | | | | | | This patch makes bits/fcntl-linux.h include <linux/falloc.h> to define the FALLOC_* flags under __USE_GNU (linux/falloc.h defines only those bits, nothing else). Tested for x86_64 and x86. * sysdeps/unix/sysv/linux/bits/fcntl-linux.h [__USE_GNU]: Include <linux/falloc.h>. (FALLOC_FL_KEEP_SIZE): Remove. (FALLOC_FL_PUNCH_HOLE): Likewise. (FALLOC_FL_COLLAPSE_RANGE): Likewise. (FALLOC_FL_ZERO_RANGE): Likewise.
* Consolidate renameat Linux implementationAdhemerval Zanella2016-12-142-1/+32
| | | | | | | | | | | | | | | This patch consolidates the Linux renameat implementation on sysdeps/unix/sysv/linux/renameat.c. The renameat syscall was deprecated at b0da6d44 for newer architectures, so using the auto-generation list may generate wrappers that returns ENOSYS. Current code try to use __NR_renameat and if it is not define it uses __NR_renameat2. Checked on x86_64 and aarch64. * sysdeps/unix/sysv/linux/renameat.c: New file. * sysdeps/unix/sysv/linux/syscalls.list: Remove renameat.
* Consolidate rename Linux implementationAdhemerval Zanella2016-12-141-4/+10
| | | | | | | | | | | | This patch consolidates the Linux rename implementation on sysdeps/unix/sysv/linux/rename.c. Current code try to use __NR_rename if is defined and apply the same strategy for __NR_renameat and __NR_renameat2. Check on x86_64 and aarch64. * sysdeps/unix/sysv/linux/rename.c: New file. * sysdeps/unix/sysv/linux/generic/rename.c: Remove file.
* Make w_log1p type-genericGabriel F. T. Gomes2016-12-142-46/+0
| | | | | | | | This patch converts the wrapper log1p (which set errno directly rather than doing anything with __kernel_standard) to use the type-generic template machinery, in the same way that has been done for ilogb. Tested for powerpc64le, s390, and x86_64.
* powerpc: remove _dl_platform_string and _dl_powerpc_platformsAndreas Schwab2016-12-132-62/+11
|
* powerpc: strncmp optimization for power9Rajalakshmi Srinivasaraghavan2016-12-135-1/+422
| | | | | | | Vectorized loops are used for strings > 32B when compared to power8 optimization. Tested on power9 ppc64le simulator.
* Add getentropy, getrandom, <sys/random.h> [BZ #17252]Florian Weimer2016-12-1231-0/+174
|
* support: Introduce new subdirectory for test infrastructureFlorian Weimer2016-12-092-21/+26
| | | | | | | | | | | | | | | The new test driver in <support/test-driver.c> has feature parity with the old one. The main difference is that its hooking mechanism is based on functions and function pointers instead of macros. This commit also implements a new environment variable, TEST_COREDUMPS, which disables the code which disables coredumps (that is, it enables them if the invocation environment has not disabled them). <test-skeleton.c> defines wrapper functions so that it is possible to use existing macros with the new-style hook functionality. This commit changes only a few test cases to the new test driver, to make sure that it works as expected.
* Get rid of __elision_availableAndreas Schwab2016-12-072-9/+3
|
* Fix hypot sNaN handling (bug 20940).Joseph Myers2016-12-077-10/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 generally defines libm functions taking sNaN arguments to return qNaN and raise "invalid", even for the cases where a corresponding qNaN argument would not result in a qNaN return. This includes hypot with one argument being an infinity and the other being an sNaN. This patch duly fixes hypot implementatations in glibc (generic and powerpc) to ensure qNaN, computed by arithmetic on the arguments, is returned in that case. Various implementations do their checks for infinities and NaNs inline by manipulating the representations of the arguments. For simplicity, this patch just uses issignaling to check for sNaN arguments. This could be inlined like the existing code (with due care about reversed quiet NaN conventions, for implementations where that is relevant), but given that all these checks are in cases where it's already known at least one argument is not finite, which should be the uncommon case, that doesn't seem worthwhile unless performance issues are observed in practice. Tested for x86_64, x86, mips64 and powerpc. [BZ #20940] * sysdeps/ieee754/dbl-64/e_hypot.c (__ieee754_hypot): Do not return Inf for arguments Inf and sNaN. * sysdeps/ieee754/flt-32/e_hypotf.c (__ieee754_hypotf): Likewise. * sysdeps/ieee754/ldbl-128/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/ieee754/ldbl-96/e_hypotl.c (__ieee754_hypotl): Likewise. * sysdeps/powerpc/fpu/e_hypot.c (TEST_INF_NAN): Do not return Inf for arguments Inf and sNaN. When returning a NaN, compute it by arithmetic on the arguments. * sysdeps/powerpc/fpu/e_hypotf.c (TEST_INF_NAN): Likewise. * math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
* Fix x86_64/x86 powl handling of sNaN arguments (bug 20916).Joseph Myers2016-12-062-9/+47
| | | | | | | | | | | | | | | | | | | | | | | | | The x86_64/x86 powl implementations mishandle sNaN arguments, both by returning sNaN in some cases (instead of doing arithmetic on the arguments to produce the result when NaN arguments result in NaN results) and by treating sNaN the same as qNaN for arguments (1, sNaN) and (sNaN, 0), contrary to TS 18661-1 which requires those cases to return qNaN instead of 1. This patch makes the x86_64/x86 powl implementations follow TS 18661-1 semantics for sNaN arguments; sNaN tests are also added for pow. Given the problems with testing float and double sNaN arguments on 32-bit x86 (sNaN tests disabled because the compiler may convert unnecessarily to a qNaN when passing arguments), no changes are made to the powf and pow implementations there. Tested for x86_64 and x86. [BZ #20916] * sysdeps/i386/fpu/e_powl.S (__ieee754_powl): Do not return 1 for arguments (sNaN, 0) or (1, sNaN). Do arithmetic on NaN arguments to compute result. * sysdeps/x86_64/fpu/e_powl.S (__ieee754_powl): Likewise. * math/libm-test.inc (pow_test_data): Add tests of sNaN arguments.
* Use C11-like atomics instead of plain memory accesses in x86 lock elision.Torvald Riegel2016-12-053-26/+50
| | | | | | | | | | | | | | | | | This uses atomic operations to access lock elision metadata that is accessed concurrently (ie, adapt_count fields). The size of the data is less than a word but accessed only with atomic loads and stores; therefore, we add support for shorter-size atomic load and stores too. * include/atomic.h (__atomic_check_size_ls): New. (atomic_load_relaxed, atomic_load_acquire, atomic_store_relaxed, atomic_store_release): Use it. * sysdeps/x86/elide.h (ACCESS_ONCE): Remove. (elision_adapt, ELIDE_LOCK): Use atomics. * sysdeps/unix/sysv/linux/x86/elision-lock.c (__lll_lock_elision): Use atomics and improve code comments. * sysdeps/unix/sysv/linux/x86/elision-trylock.c (__lll_trylock_elision): Likewise.
* Fix sysdeps/ieee754 pow handling of sNaN arguments (bug 20916).Joseph Myers2016-12-024-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Various pow function implementations mishandle sNaN arguments in various ways. This includes returning sNaN instead of qNaN for sNaN arguments. For arguments (1, sNaN) and (sNaN, 0), TS 18661-1 semantics are also that the result should be qNaN, whereas with a qNaN argument there the result should be 1, but for the dbl-64 implementation of pow there are issues with sNaN arguments beyond not implementing the TS 18661-1 semantics in those special cases. This patch makes the implementations in sysdeps/ieee754 follow the TS 18661-1 semantics consistently. Because x86 / x86_64 implementations still need fixing, testcases are not included with this patch; they will be included with the fix for the x86 / x86_64 versions. Tested for x86_64, x86, mips64 and powerpc (with such testcases, which pass in the mips64 and powerpc cases). [BZ #20916] * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return 1 for arguments (sNaN, 0) or (1, sNaN). Do arithmetic on NaN arguments to compute result. * sysdeps/ieee754/flt-32/e_powf.c (__ieee754_powf): Do not return 1 for arguments (sNaN, 0) or (1, sNaN). * sysdeps/ieee754/ldbl-128/e_powl.c (__ieee754_powl): Likewise. * sysdeps/ieee754/ldbl-128ibm/e_powl.c (__ieee754_powl): Likewise.
* Fix pow (qNaN, 0) result with -lieee (bug 20919), remove dead parts of wrappers.Joseph Myers2016-12-022-31/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The dbl-64 implementation of __ieee754_pow returns a NaN for pow (qNaN, 0) when it should return 1. Normally this is covered up by the wrappers ending up calling __kernel_standard which fixes up the result for this case, but for -lieee the wrappers are bypassed and the bad result gets through as a return value. Now, the wrappers fixing this are dealing with variant error handling that wants a result of NaN for pow (qNaN, 0), and only ever call __kernel_standard for this case if NaN resulted from __ieee754_pow. This leads to a question of whether the dbl-64 code might be deliberately returning NaN in order to use those code paths. However, I can find no sign that this is deliberate. If it were deliberate one would expect other implementations to do the same, and would expect the return of NaN to be very old, but it appears it came in by accident when the present e_pow.c implementation replaced an fdlibm implementation in 2001. So it appears to be unintended that this path through the pow wrapper could be used at all. So this patch fixes the implementation to return 1 in this case as expected. This is consistent with all the other implementations. The relevant path through the wrappers is now unreachable, so is removed (which is the main motivation of this patch: to avoid that path becoming accidentally reachable when implementing TS 18661-1 semantics that pow (sNaN, 0) should return qNaN with "invalid" raised). Another path that would require __ieee754_pow (0, 0) to return 0 is also unreachable (as all implementations return 1, in accordance with C99 semantics), so is removed as well. Note: we don't have anything set up to test -lieee, which in any case is obsolescent (at some point we should remove the ability for new programs to access _LIB_VERSION or define matherr and have it called by glibc). So testing will be implicit through sNaN tests added when making sNaN inputs work correctly for pow functions. Tested for x86_64 and x86. [BZ #20919] * sysdeps/ieee754/dbl-64/e_pow.c (__ieee754_pow): Do not return NaN first argument when raised to power 0. * math/w_pow.c (__pow): Do not check for NaN or zero results from raising to power zero. * math/w_powf.c (__powf): Likewise. * math/w_powl.c (__powl): Likewise. * sysdeps/ieee754/k_standard.c (__kernel_standard): Do not handle pow (0, 0) or pow (NaN, 0).
* aarch64: Use explicit offsets in _dl_tlsdesc_dynamicFlorian Weimer2016-12-022-9/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 389d1f1b232b3d6b9d73ee2c50e543ace6675621 (“Partial ILP32 support for aarch64”) broke dynamic TLS support because a load offset changed: 0000000000000030 <_dl_tlsdesc_dynamic>: 30: a9bc7bfd stp x29, x30, [sp,#-64]! 34: 910003fd mov x29, sp 38: a9020be1 stp x1, x2, [sp,#32] 3c: a90313e3 stp x3, x4, [sp,#48] 40: d53bd044 mrs x4, tpidr_el0 44: c8dffc1f ldar xzr, [x0] 48: f9400401 ldr x1, [x0,#8] 4c: f9400080 ldr x0, [x4] 50: f9400823 ldr x3, [x1,#16] 54: f9400002 ldr x2, [x0] 58: eb02007f cmp x3, x2 5c: 540001a8 b.hi 90 <_dl_tlsdesc_dynamic+0x60> 60: f9400022 ldr x2, [x1] 64: 8b021000 add x0, x0, x2, lsl #4 68: f9400000 ldr x0, [x0] 6c: b100041f cmn x0, #0x1 70: 54000100 b.eq 90 <_dl_tlsdesc_dynamic+0x60> - 74: f9400421 ldr x1, [x1,#8] + 74: f9400821 ldr x1, [x1,#16] 78: 8b010000 add x0, x0, x1 … This commit introduces explicit struct offsets, generated from the C headers, fixing the regression.
* S390: Regenerate ULPs.Stefan Liebler2016-12-021-6/+6
| | | | | | | | Updated ulps file. ChangeLog: * sysdeps/s390/fpu/libm-test-ulps: Regenerated.
* Add llogb, llogbf, llogbl.Joseph Myers2016-12-0230-1/+114
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TS 18661-1 defines llogb functions that are like ilogb except that they return long int instead of int. Corresponding FP_LLOGB* macros are defined, whose values are required to have the obvious correspondence to those of the FP_ILOGB* macros. This patch implements these functions and macros for glibc. llogb uses the type-generic infrastructure, with an implementation similar to the wrapper for ilogb but with additional conversion from FP_ILOGB* to FP_LLOGB*; this approach avoids needing to modify or duplicate any of the architecture-specific ilogb implementations. Tests are also based on those for ilogb. Ideally the llogb functions would alias the ilogb ones when long is 32-bit, but such aliasing requires the associated header declarations of the different-type alias to be hidden, typically by defining macros before including the header (see e.g. how sysdeps/ieee754/dbl-64/wordsize-64/s_llround.c defines lround to __hidden_lround before including <math.h>). The infrastructure for type-generic function implementations does not support defining such macros at present (since C code can't define a macro whose name is determined by other macros). So this patch leaves them as separate functions (similar to e.g. scalbln and scalbn being separate in such a case as well), but with the remapping of FP_ILOGB* to FP_LLOGB* conditioned out in the case where it would be the identity map. Tested for x86_64, x86, mips64 and powerpc. * math/bits/mathcalls.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New declaration. * math/tgmath.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (llogb): New macro. * math/math.h [__GLIBC_USE (IEC_60559_BFP_EXT)] (__FP_LONG_MAX): New macro. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGB0): Likewise. [__GLIBC_USE (IEC_60559_BFP_EXT)] (FP_LLOGBNAN): Likewise. * math/Versions (llogb): New libm symbol at version GLIBC_2.25. (llogbf): Likewise. (llogbl): Likewise. * math/Makefile (gen-libm-calls): Add w_llogbF. (tests): Add test-fp-llogb-constants. * math/w_llogb_template.c: New file. Based on math/w_ilogb_template.c. * math/libm-test.inc (llogb_test_data): New array. (llogb_test): New function. (main): Call llogb_test. * math/test-fp-llogb-constants.c: New file. Based on math/test-fp-ilogb-constants.c. * math/test-tgmath-ret.c (llogb): New CHECK_RET_CONST call. (do_test): Call check_return_llogb. * math/test-tgmath.c (NCALLS): Increase to 126. (F(compile_test)): Call llogb. (F(llogb)): New function. * manual/math.texi (Exponents and Logarithms): Document llogb, llogbf, llogbl, FP_LLOGB0 and FP_LLOGBNAN. * manual/libm-err-tab.pl (@all_functions): Add llogb. * sysdeps/ieee754/ldbl-opt/nldbl-llogb.c: New file. * sysdeps/ieee754/ldbl-opt/w_llogbl.c: Likewise. * sysdeps/ieee754/ldbl-opt/Makefile (libnldbl-calls): Add llogb. (CFLAGS-nldbl-llogb.c): New variable. * sysdeps/nacl/libm.abilist: Update. * sysdeps/unix/sysv/linux/aarch64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/alpha/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/arm/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/hppa/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/i386/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/ia64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/coldfire/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/m68k/m680x0/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/microblaze/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/mips/mips64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/nios2/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/fpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc32/nofpu/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm-le.abilist: Likewise. * sysdeps/unix/sysv/linux/powerpc/powerpc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/s390/s390-64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sh/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx32/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilegx/tilegx64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/tile/tilepro/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/64/libm.abilist: Likewise. * sysdeps/unix/sysv/linux/x86_64/x32/libm.abilist: Likewise.
* Make ldbl-128 getpayload, setpayload functions use _Float128.Joseph Myers2016-12-012-4/+4
| | | | | | | | | | | | | When I added the getpayload and setpayload functions I failed to make the ldbl-128 functions use the _Float128 type name like most other ldbl-128 functions do in preparation for being used to implement *f128 functions. This patch fixes them to use that name. Tested for mips64. * sysdeps/ieee754/ldbl-128/s_getpayloadl.c (getpayloadl): Use _Float128 instead of long double. * sysdeps/ieee754/ldbl-128/s_setpayloadl_main.c (FUNC): Likewise.
* Add missing hidden_def (__sigsetjmp).Joseph Myers2016-12-019-0/+9
| | | | | | | | | | | | | | | | | | | This patch adds the missing hidden_def (__sigsetjmp) on various architectures that were failing to build (as noted in <https://sourceware.org/ml/libc-alpha/2016-11/msg01124.html>). Tested (compilation only) with build-many-glibcs.py. * sysdeps/alpha/setjmp.S (__sigsetjmp): Use hidden_def. * sysdeps/hppa/setjmp.S (__sigsetjmp): Likewise. * sysdeps/mips/mips64/setjmp.S (__sigsetjmp): Likewise. * sysdeps/mips/setjmp.S (__sigsetjmp): Likewise. * sysdeps/sh/sh3/setjmp.S (__sigsetjmp): Likewise. * sysdeps/sh/sh4/setjmp.S (__sigsetjmp): Likewise. * sysdeps/sparc/sparc32/setjmp.S (__sigsetjmp): Likewise. * sysdeps/tile/setjmp.S (__sigsetjmp): Likewise. * sysdeps/unix/sysv/linux/sparc/sparc64/setjmp.S (__sigsetjmp): Likewise.
* powerpc: Remove stpcpy internal clash with IFUNCAdhemerval Zanella2016-12-011-3/+3
| | | | | | | | | | | | | | | | | | | | | Commit c7debbdfacb redirected the internal strrch to default powerpc64 implementation by redefining the weak_alias at sysdeps/powerpc/powerpc64/multiarch/strchr-ppc64.c: #undef weak_alias #define weak_alias(name, aliasname) \ extern __typeof (__strrchr_ppc) aliasname \ __attribute__ ((weak, alias ("__strrchr_ppc"))); This creates a __GI_strchr alias that clashes with the IFUNC symbol in stprchr.os. There is not need to define the default version for internal version, since ifunc should work internally for powerpc64. This patch removes the weak_alias indirection. Checked on powerpc64le. * sysdeps/powerpc/powerpc64/multiarch/strrchr-ppc64.c (weak_alias): Remove redirection to __strrchr_ppc.
* powerpc: strcmp optimization for power9Rajalakshmi Srinivasaraghavan2016-12-015-1/+326
| | | | | | | Vectorized loops are used for strings > 32B when compared to power8 optimization. Tested on power9 ppc64le simulator.
* Refactor FP_ILOGB* out of bits/mathdef.h.Joseph Myers2016-12-0112-94/+72
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the refactoring of bits/mathdef.h, this patch stops it defining FP_ILOGB0 and FP_ILOGBNAN, moving the required information to a new header bits/fp-logb.h. There are only two possible values of each of those macros permitted by ISO C. TS 18661-1 adds corresponding macros for llogb, and their values are required to correspond to those of the ilogb macros in the obvious way. Thus two boolean values - for which the same choices are correct for most architectures - suffice to determine the value of all these macros, and by defining macros for those boolean values in bits/fp-logb.h we can then define the public FP_* macros in math.h and avoid the present duplication of the associated feature test macro logic. This patch duly moves to bits/fp-logb.h defining __FP_LOGB0_IS_MIN and __FP_LOGBNAN_IS_MIN. Default definitions of those to 0 are correct for both architectures, while ia64, m68k and x86 get their own versions of bits/fp-logb.h to reflect their use of values different from the defaults. The patch renders many copies of bits/mathdef.h trivial (needed only to avoid the default __NO_LONG_DOUBLE_MATH). I'll revise <https://sourceware.org/ml/libc-alpha/2016-11/msg00865.html> accordingly so that it removes all bits/mathdef.h headers except the default one and the alpha one, and arranges for the header to be included only by complex.h as the only remaining use at that point will be for the alpha ABI issues there. Tested for x86_64 and x86. Also did compile-only testing with build-many-glibcs.py (using glibc sources from before the commit that introduced many build failures with undefined __GI___sigsetjmp). * bits/fp-logb.h: New file. * sysdeps/ia64/bits/fp-logb.h: Likewise. * sysdeps/m68k/m680x0/bits/fp-logb.h: Likewise. * sysdeps/x86/bits/fp-logb.h: Likewise. * math/Makefile (headers): Add bits/fp-logb.h. * math/math.h: Include <bits/fp-logb.h>. [__USE_ISOC99] (FP_ILOGB0): Define based on __FP_LOGB0_IS_MIN. [__USE_ISOC99] (FP_ILOGBNAN): Define based on __FP_LOGBNAN_IS_MIN. * bits/mathdef.h (FP_ILOGB0): Remove. (FP_ILOGBNAN): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/alpha/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/ia64/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/m68k/m680x0/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/mips/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/s390/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/sparc/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise. * sysdeps/x86/bits/mathdef.h (FP_ILOGB0): Likewise. (FP_ILOGBNAN): Likewise.
* powerpc: Remove stpcpy internal clash with IFUNCAdhemerval Zanella2016-11-301-3/+1
| | | | | | | | | | | | | | | | | | | | | Commit 142e0a99530 redirected the internal stpcpy to default powerpc64 implementation by redefining the weak_alias at sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c: #undef weak_alias #define weak_alias(name, aliasname) \ extern __typeof (__stpcpy_ppc) aliasname \ __attribute__ ((weak, alias ("__stpcpy_ppc"))); This creates a __GI_stpcpy alias that clashes with the IFUNC symbol in stpcpy.os. There is not need to define the default version for internal version, since ifunc should work internally for powerpc64. This patch removes the weak_alias indirection. Checked on powerpc64le. * sysdeps/powerpc/powerpc64/multiarch/stpcpy-ppc64.c (weak_alias): Remove redirection to __stpcpy_ppc.
* ld.so: Remove __libc_memalignFlorian Weimer2016-11-3045-106/+40
| | | | | | | It is no longer needed since commit 6c444ad6e953dbdf9c7be065308a0a777 (elf: Do not use memalign for TCB/TLS blocks allocation [BZ #17730]). Applications do not link against ld.so and will use the definition in libc.so, so there is no ABI impact.
* Implement _dl_catch_error, _dl_signal_error in libc.so [BZ #16628]Florian Weimer2016-11-3019-18/+82
| | | | | | | | | | | | | | | | | | This change moves the main implementation of _dl_catch_error, _dl_signal_error to libc.so, where TLS variables can be used directly. This removes a writable function pointer from the rtld_global variable. For use during initial relocation, minimal implementations of these functions are provided in ld.so. These are eventually interposed by the libc.so implementations. This is implemented by compiling elf/dl-error-skeleton.c twice, via elf/dl-error.c and elf/dl-error-minimal.c. As a side effect of this change, the static version of dl-error.c no longer includes support for the _dl_signal_cerror/_dl_receive_error mechanism because it is only used in ld.so.
* Use XSTAT_IS_XSTAT64 in generic xstat functionsSteve Ellcey2016-11-298-0/+107
| | | | | | | | | | | | | | | | | * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat.c: Do not define fxstat if XSTAT_IS_XSTAT64 is set to non-zero. * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat.c: Ditto for fxstatat. * sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat.c: Ditto for lxstat. * sysdeps/unix/sysv/linux/generic/wordsize-32/xstat.c: Ditto for xstat. * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstat64.c: New file. * sysdeps/unix/sysv/linux/generic/wordsize-32/fxstatat64.c: New file. * sysdeps/unix/sysv/linux/generic/wordsize-32/lxstat64.c: Make __lxstat an alias of __lxstat64 if XSTAT_IS_XSTAT64 is set to non-zero. * sysdeps/unix/sysv/linux/generic/wordsize-32/xstat64.c: Ditto for __xstat.
* powerpc: Add hidden definition for __sigsetjmpFlorian Weimer2016-11-293-0/+13
| | | | | There already is a hidden prototype for __sigsetjmp, but the architecture-specific definition was missing.
* powerpc: Remove unintended __longjmp symbol from ABIFlorian Weimer2016-11-292-4/+1
| | | | | | | | The __longjmp symbol was left in accidentally. It is not exported through a Versions file, but through a .symver assembler directive. The corresponding exported symbol was removed from the non-fpu powerpc64 targets in commit 9b9ef823581ecee546653d6ac3fd335f7b79faca.
* Refactor FP_FAST_* into bits/fp-fast.h.Joseph Myers2016-11-297-144/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Continuing the refactoring of bits/mathdef.h, this patch moves the FP_FAST_* definitions into a new bits/fp-fast.h header. Currently this is only for FP_FAST_FMA*, but in future it would be the appropriate place for the FP_FAST_* macros from TS 18661-1 as well. The generic bits/mathdef.h header defines these macros based on whether the compiler defines __FP_FAST_*. Most architecture-specific headers, however, fail to do so, meaning that if the architecture (or some particular processors) does in fact have fused operations, and GCC knows to use them inline, the FP_FAST_* macros will still not be defined. By refactoring, this patch causes the generic version (based on __FP_FAST_*) to be used in more cases, and so the macro definitions to be more accurate. Architectures that already defined some or all of these macros other than based on the predefines have their own versions of fp-fast.h, which are arranged so they define FP_FAST_* if either the architecture-specific conditions are true or __FP_FAST_* are defined. After this refactoring, various bits/mathdef.h headers for architectures with long double = double are semantically identical to the generic version. The patch removes those headers that are redundant. (In fact two of the four removed were already redundant before this patch because they did use __FP_FAST_*.) Tested for x86_64 and x86, and compilation-only with build-many-glibcs.py. * bits/fp-fast.h: New file. * sysdeps/aarch64/bits/fp-fast.h: Likewise. * sysdeps/powerpc/bits/fp-fast.h: Likewise. * math/Makefile (headers): Add bits/fp-fast.h. * math/math.h: Include <bits/fp-fast.h>. * bits/mathdef.h (FP_FAST_FMA): Remove. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/aarch64/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/powerpc/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. * sysdeps/x86/bits/mathdef.h (FP_FAST_FMA): Likewise. (FP_FAST_FMAF): Likewise. (FP_FAST_FMAL): Likewise. * sysdeps/arm/bits/mathdef.h: Remove file. * sysdeps/hppa/fpu/bits/mathdef.h: Likewise. * sysdeps/sh/sh4/bits/mathdef.h: Likewise. * sysdeps/tile/bits/mathdef.h: Likewise.
generated by cgit-pink 1.4.1 (git 2.36.1) at 2024-12-11 09:44:12 +0000